1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13#options CPU_DISABLE_AVX 14 15makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 16 17options INET #InterNETworking 18options INET6 #IPv6 communications protocols 19options HAMMER #Hammer Filesystem 20options NULLFS #NULL filesystem 21options FFS #Berkeley Fast Filesystem 22options FFS_ROOT #FFS usable as root device [keep this!] 23options SOFTUPDATES #Enable FFS soft updates support 24options UFS_DIRHASH #Improve performance on big directories 25options MFS #Memory Filesystem 26options TMPFS #Temporary Filesystem 27options MD_ROOT #MD is a potential root device 28options NFS #Network Filesystem 29options NFS_ROOT #NFS usable as root device, NFS required 30options MSDOSFS #MSDOS Filesystem 31options CD9660 #ISO 9660 Filesystem 32options PROCFS #Process filesystem 33#options COMPAT_43 #Compatible with BSD 4.3 34options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 35options IFPOLL_ENABLE # Support mixed interrupt-polling 36 # handling of network device drivers 37options UCONSOLE #Allow users to grab the console 38options KTRACE #ktrace(1) support 39options SYSVSHM #SYSV-style shared memory 40options SYSVMSG #SYSV-style message queues 41options SYSVSEM #SYSV-style semaphores 42options P1003_1B #Posix P1003_1B real-time extensions 43options _KPOSIX_PRIORITY_SCHEDULING 44options ICMP_BANDLIM #Rate limit bad replies 45options KBD_INSTALL_CDEV # install a CDEV entry in /dev 46options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 47 # output. Adds ~128k to driver. 48options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 49 # output. Adds ~215k to driver. 50options DSCHED_FQ # Fair-queuing disk scheduler 51 52# ALTQ 53options ALTQ #alternate queueing 54options ALTQ_CBQ #class based queueing 55options ALTQ_RED #random early detection 56options ALTQ_RIO #triple red for diffserv (needs RED) 57options ALTQ_HFSC #hierarchical fair service curve 58options ALTQ_PRIQ #priority queue 59options ALTQ_FAIRQ #fair queueing 60#options ALTQ_NOPCC #don't use processor cycle counter 61#options ALTQ_DEBUG #for debugging 62 63# Debugging for Development 64options DDB 65options DDB_TRACE 66options INVARIANTS 67 68device isa 69device pci 70 71# AHCI driver, this will override NATA for AHCI devices, 72# both drivers may be included. 73# 74device ahci 75 76# SiI3124/3132 driver 77# 78device sili 79 80# NEW-ATA (NATA) and ATAPI devices 81# 82device nata 83device natadisk # ATA disk drives 84device natapicd # ATAPI CDROM drives 85device natapifd # ATAPI floppy drives 86device natapist # ATAPI tape drives 87device natapicam # Emulate ATAPI devices as SCSI 88device nataraid # support for ATA software RAID 89 # controllers 90options ATA_STATIC_ID # Static device numbering 91 92# SCSI Controllers 93device ahc # AHA2940 and onboard AIC7xxx devices 94device ahd # AHA39320/29320 and onboard AIC79xx devices 95device amd # AMD 53C974 (Tekram DC-390(T)) 96device isp # Qlogic family 97#device ispfw # Firmware for QLogic HBAs- normally a module 98device mpt # LSI-Logic MPT/Fusion 99device mps # LSI-Logic MPT-Fusion 2 100device ncr # NCR/Symbios Logic 101device sym # NCR/Symbios Logic (newer chipsets) 102options SYM_SETUP_LP_PROBE_MAP=0x40 103 # Allow ncr to attach legacy NCR devices when 104 # both sym and ncr are configured 105 106device adv0 at isa? 107device adw 108device bt 109device aic 110 111device ncv # NCR 53C500 112device nsp # Workbit Ninja SCSI-3 113device stg # TMC 18C30/18C50 114 115# SCSI peripherals 116device scbus # SCSI bus (required) 117device da # Direct Access (disks) 118device sa # Sequential Access (tape etc) 119device cd # CD 120device pass # Passthrough device (direct SCSI access) 121device sg # Passthrough device (linux scsi generic) 122 123# RAID controllers interfaced to the SCSI subsystem 124device arcmsr # Areca SATA II RAID 125device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 126device ciss # Compaq SmartRAID 5* series 127device dpt # DPT Smartcache - See LINT for options! 128device "hpt27xx" # Highpoint RocketRAID 27xx series 129device hptiop # Highpoint RocketRAID 3xxx series 130device hptmv # Highpoint RocketRAID 182x 131device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx 132device iir # Intel Integrated RAID 133device mly # Mylex AcceleRAID/eXtremeRAID 134device mrsas # LSI MegaRAID SAS (Thunderbolt series and up) 135device twa # 3ware 9000 series PATA/SATA RAID 136device tws # 3ware 9750 series SATA/SAS RAID 137 138# RAID controllers 139device aac # Adaptec FSA RAID, Dell PERC2/PERC3 140device aacp # SCSI passthrough for aac (requires CAM) 141device amr # AMI MegaRAID 142device amrp # SCSI Passthrough interface (optional, CAM req.) 143device ida # Compaq Smart RAID 144device ips # IBM ServeRAID 145device mlx # Mylex DAC960 family 146device mfi # LSI MegaRAID SAS 147device mfip # LSI MegaRAID SAS passthrough, requires CAM 148device twe # 3ware Escalade 7000/8000's 149 150# VirtIO support 151device virtio # VirtIO core 152device virtio_blk # VirtIO disk driver 153device vtnet # VirtIO network driver 154device virtio_pci # VirtIO transport over PCI bus 155 156# atkbdc0 controls both the keyboard and the PS/2 mouse 157device atkbdc0 at isa? port IO_KBD 158device atkbd0 at atkbdc? irq 1 159device psm0 at atkbdc? irq 12 160 161device vga0 at isa? 162 163# kbdmux is the keyboard multiplexer 164device kbdmux 165 166# splash screen/screen saver 167pseudo-device splash 168 169# syscons is the default console driver, resembling an SCO console 170device sc0 at isa? flags 0x100 171options SC_PIXEL_MODE # add support for the raster text mode 172 173device agp # support several AGP chipsets 174 175# Intel performance-energy bias 176device perfbias 177# Intel software controlled clock modulation 178device clockmod 179 180# HW monitoring devices 181#device aps0 at isa? port 0x1600 182device lm0 at isa? port 0x290 183device it0 at isa? port 0x290 184device it1 at isa? port 0xc00 185device it2 at isa? port 0xd00 186device it3 at isa? port 0x228 187device wbsio0 at isa? port 0x2e 188device wbsio1 at isa? port 0x4e 189device lm#3 at wbsio? 190# Intel Core and newer CPUs on-die digital thermal sensor support 191device coretemp 192 193# PCCARD (PCMCIA) support 194device pccard 195device cardbus 196device cbb 197 198# Serial (COM) ports 199device sio0 at isa? port IO_COM1 flags 0x10 irq 4 200device sio1 at isa? port IO_COM2 irq 3 201device sio2 at isa? disable port IO_COM3 irq 5 202device sio3 at isa? disable port IO_COM4 irq 9 203 204# Parallel port 205device ppc0 at isa? irq 7 206device ppbus # Parallel port bus (required) 207device lpt # Printer 208device plip # TCP/IP over parallel 209device ppi # Parallel port interface device 210#device vpo # Requires scbus and da 211 212# PCI Ethernet NICs. 213device de # DEC/Intel DC21x4x (``Tulip'') 214device txp # 3Com 3cR990 (``Typhoon'') 215device vx # 3Com 3c590, 3c595 (``Vortex'') 216 217device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 218 # Requires ig_hal 219device igb # Intel Pro/1000 (82575, 82576, 82580, i350) 220 # Requires ig_hal 221device ig_hal # Intel PRO/1000 hardware abstraction layer 222device ix # Intel PRO/10GbE PCIE Ethernet Family 223 224device oce # Emulex OneConnect 10Gb 225 226# PCI Ethernet NICs that use the common MII bus controller code. 227# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 228device miibus # MII bus support 229device ae # Attansic/Atheros L2 Fast Ethernet 230device age # Attansic/Atheros L1 Gigabit Ethernet 231device alc # Atheros AR8131/AR8132 232device ale # Atheros AR8121/AR8113/AR8114 233device bce # Broadcom NetXtreme II Gigabit Ethernet 234device bfe # Broadcom BCM440x 10/100 Ethernet 235device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet 236device dc # DEC/Intel 21143 and various workalikes 237device et # Agere ET1310 10/100/1000 Ethernet 238device fxp # Intel EtherExpress PRO/100B (82557, 82558) 239device jme # JMicron Gigabit/Fast Ethernet 240device pcn # AMD Am79C97x PCI 10/100 NICs 241device rl # RealTek 8129/8139 242device re # RealTek 8139C+/8169 243device sf # Adaptec AIC-6915 (``Starfire'') 244device sis # Silicon Integrated Systems SiS 900/SiS 7016 245device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 246device ste # Sundance ST201 (D-Link DFE-550TX) 247device tl # Texas Instruments ThunderLAN 248device tx # SMC EtherPower II (83c170 ``EPIC'') 249device vge # VIA 612x GigE 250device vr # VIA Rhine, Rhine II 251device wb # Winbond W89C840F 252device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 253device bge # Broadcom BCM570x (``Tigon III'') 254device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 255device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 256device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 257device ex 258device xe # Xircom Ethernet 259 260# Wireless NIC cards 261options IEEE80211_DEBUG #enable debugging msgs 262options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 263options IEEE80211_SUPPORT_TDMA #enable TDMA support 264device wlan # 802.11 support 265device wlan_ccmp # 802.11 CCMP support 266device wlan_tkip # 802.11 TKIP support 267device wlan_wep # 802.11 WEP support 268#device wlan_amrr # AMRR 269 270# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 271# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 272# mode (the factory default). If you set the switches on your ISA 273# card for a manually chosen I/O address and IRQ, you must specify 274# those parameters here. 275device an 276device ath # Atheros NICs 277device ath_hal # Atheros Hardware Access Layer 278options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors 279device ath_rate_sample # Atheros Sample TX rate control algorithm 280device siba_bwn # Sonic Inc. Silicon Backplane needed for bwn 281device bwn # Broadcom BCM43xx NICs using v4 firmware 282device ral # Ralink Technology 802.11 wireless NIC 283device iwn # Intel 284#device rtw # RealTek 802.11 wireless NIC 285# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 286# exists only as a PCMCIA device, so there is no ISA attachment needed 287# and resources will always be dynamically assigned by the pccard code. 288device wi 289 290device lnc0 at isa? disable port 0x280 irq 10 drq 0 291device cs0 at isa? disable port 0x300 292device sn0 at isa? disable port 0x300 irq 10 293 294# Pseudo devices - the number indicates how many units to allocate. 295pseudo-device loop # Network loopback 296pseudo-device ether # Ethernet support 297pseudo-device sl 1 # Kernel SLIP 298pseudo-device ppp 1 # Kernel PPP 299pseudo-device tun # Packet tunnel. 300pseudo-device pty # Pseudo-ttys (telnet etc) 301pseudo-device md # Memory "disks" 302pseudo-device gif # IPv6 and IPv4 tunneling 303pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 304 305# CARP support 306options CARP 307pseudo-device carp 308 309# The `bpf' pseudo-device enables the Berkeley Packet Filter. 310# Be aware of the administrative consequences of enabling this! 311pseudo-device bpf #Berkeley packet filter 312 313pseudo-device crypto # core crypto support, used by wlan 314 315# USB support 316# 317# NOTE: If you enable 'oldusb' you must also disable 'usb' and rebuild 318# the world with WANT_OLDUSB=true in /etc/make.conf, in addition 319# to rebuilding the kernel. 320# 321#device oldusb # use this instead of usb for the old stack 322#device natausb # ATA-over-USB support (oldusb) 323#device ugen # Generic (oldusb) 324#device uscanner # Scanners (oldusb) 325#device urio # Diamond Rio MP3 Player (oldusb) 326#device aue # ADMtek USB ethernet (oldusb) 327#device cue # CATC USB ethernet (oldusb) 328#device kue # Kawasaki LSI USB ethernet (oldusb) 329#device rue # RealTek 8150 based USB ethernet (oldusb) 330 331device usb # USB Bus (required) 332device uhci # UHCI PCI->USB interface 333device ohci # OHCI PCI->USB interface 334device uhid # "Human Interface Devices" 335device ukbd # Keyboard 336device ulpt # Printer 337device umass # Disks/Mass storage - Requires scbus and da 338device ums # Mouse 339# USB Ethernet, requires mii 340device axe # ASIX Electronics USB Ethernet 341# USB wireless NICs, requires wlan, wlan_amrr 342#device rum # Ralink Technology RT2501USB/RT2601USB 343#device ural # Ralink Technology RT2500USB 344 345# FireWire support 346device firewire # FireWire bus code 347device sbp # SCSI over FireWire (Requires scbus and da) 348device fwe # Ethernet over FireWire (non-standard!) 349 350# MMC/SD 351device mmc 352device mmcsd 353device sdhci 354 355# RNG 356# 357device aesni # hardware crypto/RNG for AES-NI 358#device glxsb # Geode LX Security Block 359device padlock # hardware crypto/RNG for VIA C3/C7/Eden 360device rdrand # hardware RNG for RdRand 361