1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13 14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 15 16options INET #InterNETworking 17options INET6 #IPv6 communications protocols 18options HAMMER #Hammer Filesystem 19options NULLFS #NULL filesystem 20options FFS #Berkeley Fast Filesystem 21options FFS_ROOT #FFS usable as root device [keep this!] 22options SOFTUPDATES #Enable FFS soft updates support 23options UFS_DIRHASH #Improve performance on big directories 24options MFS #Memory Filesystem 25options TMPFS #Temporary Filesystem 26options MD_ROOT #MD is a potential root device 27options NFS #Network Filesystem 28options NFS_ROOT #NFS usable as root device, NFS required 29options MSDOSFS #MSDOS Filesystem 30options CD9660 #ISO 9660 Filesystem 31options PROCFS #Process filesystem 32#options COMPAT_43 #Compatible with BSD 4.3 33options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 34options DEVICE_POLLING # Support mixed interrupt-polling 35 # handling of network device drivers 36options UCONSOLE #Allow users to grab the console 37options KTRACE #ktrace(1) support 38options SYSVSHM #SYSV-style shared memory 39options SYSVMSG #SYSV-style message queues 40options SYSVSEM #SYSV-style semaphores 41options P1003_1B #Posix P1003_1B real-time extensions 42options _KPOSIX_PRIORITY_SCHEDULING 43options ICMP_BANDLIM #Rate limit bad replies 44options KBD_INSTALL_CDEV # install a CDEV entry in /dev 45options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 46 # output. Adds ~128k to driver. 47options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 48 # output. Adds ~215k to driver. 49options DSCHED_FQ # Fair-queuing disk scheduler 50 51# ALTQ 52options ALTQ #alternate queueing 53options ALTQ_CBQ #class based queueing 54options ALTQ_RED #random early detection 55options ALTQ_RIO #triple red for diffserv (needs RED) 56options ALTQ_HFSC #hierarchical fair service curve 57options ALTQ_PRIQ #priority queue 58options ALTQ_FAIRQ #fair queueing 59#options ALTQ_NOPCC #don't use processor cycle counter 60#options ALTQ_DEBUG #for debugging 61 62 63# Kernels configured with 'options SMP' should generally boot on both 64# SMP and UP boxes. 65# 66options SMP # Symmetric MultiProcessor Kernel 67 68# Debugging for Development 69options DDB 70options DDB_TRACE 71options INVARIANTS 72 73device isa 74device pci 75 76# AHCI driver, this will override NATA for AHCI devices, 77# both drivers may be included. 78# 79device ahci 80 81# SiI3124/3132 driver 82# 83device sili 84 85# NEW-ATA (NATA) and ATAPI devices 86# 87device nata 88device natadisk # ATA disk drives 89device natapicd # ATAPI CDROM drives 90device natapifd # ATAPI floppy drives 91device natapist # ATAPI tape drives 92device natapicam # Emulate ATAPI devices as SCSI 93device nataraid # support for ATA software RAID 94 # controllers 95device natausb # ATA-over-USB support 96options ATA_STATIC_ID # Static device numbering 97 98# SCSI Controllers 99device ahc # AHA2940 and onboard AIC7xxx devices 100device ahd # AHA39320/29320 and onboard AIC79xx devices 101device amd # AMD 53C974 (Tekram DC-390(T)) 102device isp # Qlogic family 103#device ispfw # Firmware for QLogic HBAs- normally a module 104device mpt # LSI-Logic MPT/Fusion 105device ncr # NCR/Symbios Logic 106device sym # NCR/Symbios Logic (newer chipsets) 107options SYM_SETUP_LP_PROBE_MAP=0x40 108 # Allow ncr to attach legacy NCR devices when 109 # both sym and ncr are configured 110 111device adv0 at isa? 112device adw 113device bt0 at isa? 114device aic0 at isa? 115 116device ncv # NCR 53C500 117device nsp # Workbit Ninja SCSI-3 118device stg # TMC 18C30/18C50 119 120# SCSI peripherals 121device scbus # SCSI bus (required) 122device da # Direct Access (disks) 123device sa # Sequential Access (tape etc) 124device cd # CD 125device pass # Passthrough device (direct SCSI access) 126device sg # Passthrough device (linux scsi generic) 127 128# RAID controllers interfaced to the SCSI subsystem 129device arcmsr # Areca SATA II RAID 130device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 131device ciss # Compaq SmartRAID 5* series 132device dpt # DPT Smartcache - See LINT for options! 133device hptiop # Highpoint RocketRaid 3xxx series 134device hptmv # Highpoint RocketRAID 182x 135device iir # Intel Integrated RAID 136device mly # Mylex AcceleRAID/eXtremeRAID 137device twa # 3ware 9000 series PATA/SATA RAID 138device tws # 3ware 9750 series SATA/SAS RAID 139 140# RAID controllers 141device aac # Adaptec FSA RAID, Dell PERC2/PERC3 142device aacp # SCSI passthrough for aac (requires CAM) 143device amr # AMI MegaRAID 144device amrp # SCSI Passthrough interface (optional, CAM req.) 145device ida # Compaq Smart RAID 146device ips # IBM ServeRAID 147device mlx # Mylex DAC960 family 148device mfi # LSI MegaRAID SAS 149device mfip # LSI MegaRAID SAS passthrough, requires CAM 150device twe # 3ware Escalade 7000/8000's 151 152# atkbdc0 controls both the keyboard and the PS/2 mouse 153device atkbdc0 at isa? port IO_KBD 154device atkbd0 at atkbdc? irq 1 flags 0x1 155device psm0 at atkbdc? irq 12 156 157device vga0 at isa? 158 159# kbdmux is the keyboard multiplexer 160device kbdmux 161 162# splash screen/screen saver 163pseudo-device splash 164 165# syscons is the default console driver, resembling an SCO console 166device sc0 at isa? flags 0x100 167options SC_PIXEL_MODE # add support for the raster text mode 168 169device agp # support several AGP chipsets 170 171# HW monitoring devices 172#device aps0 at isa? port 0x1600 173device lm0 at isa? port 0x290 174device it0 at isa? port 0x290 175device it1 at isa? port 0xc00 176device it2 at isa? port 0xd00 177device it3 at isa? port 0x228 178device wbsio0 at isa? port 0x2e 179device wbsio1 at isa? port 0x4e 180device lm#3 at wbsio? 181 182# PCCARD (PCMCIA) support 183device pccard 184device cardbus 185device cbb 186 187# Serial (COM) ports 188device sio0 at isa? port IO_COM1 flags 0x10 irq 4 189device sio1 at isa? port IO_COM2 irq 3 190device sio2 at isa? disable port IO_COM3 irq 5 191device sio3 at isa? disable port IO_COM4 irq 9 192 193# Parallel port 194device ppc0 at isa? irq 7 195device ppbus # Parallel port bus (required) 196device lpt # Printer 197device plip # TCP/IP over parallel 198device ppi # Parallel port interface device 199#device vpo # Requires scbus and da 200 201 202# PCI Ethernet NICs. 203device de # DEC/Intel DC21x4x (``Tulip'') 204device txp # 3Com 3cR990 (``Typhoon'') 205device vx # 3Com 3c590, 3c595 (``Vortex'') 206 207device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 208 # Requires ig_hal 209device ig_hal # Intel PRO/1000 hardware abstraction layer 210 211# PCI Ethernet NICs that use the common MII bus controller code. 212# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 213device miibus # MII bus support 214device ae # Attansic/Atheros L2 Fast Ethernet 215device age # Attansic/Atheros L1 Gigabit Ethernet 216device alc # Atheros AR8131/AR8132 217device ale # Atheros AR8121/AR8113/AR8114 218device bce # Broadcom NetXtreme II Gigabit Ethernet 219device bfe # Broadcom BCM440x 10/100 Ethernet 220device dc # DEC/Intel 21143 and various workalikes 221device et # Agere ET1310 10/100/1000 Ethernet 222device fxp # Intel EtherExpress PRO/100B (82557, 82558) 223device jme # JMicron Gigabit/Fast Ethernet 224device pcn # AMD Am79C97x PCI 10/100 NICs 225device rl # RealTek 8129/8139 226device re # RealTek 8139C+/8169 227device sf # Adaptec AIC-6915 (``Starfire'') 228device sis # Silicon Integrated Systems SiS 900/SiS 7016 229device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 230device ste # Sundance ST201 (D-Link DFE-550TX) 231device tl # Texas Instruments ThunderLAN 232device tx # SMC EtherPower II (83c170 ``EPIC'') 233device vge # VIA 612x GigE 234device vr # VIA Rhine, Rhine II 235device wb # Winbond W89C840F 236device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 237device bge # Broadcom BCM570x (``Tigon III'') 238device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 239device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 240device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 241 242# ISA Ethernet NICs. 243# 'device ed' requires 'device miibus' 244device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 245device ex 246# Xircom Ethernet 247device xe 248 249# Wireless NIC cards 250options IEEE80211_DEBUG #enable debugging msgs 251options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 252options IEEE80211_SUPPORT_TDMA #enable TDMA support 253device wlan # 802.11 support 254device wlan_ccmp # 802.11 CCMP support 255device wlan_tkip # 802.11 TKIP support 256device wlan_wep # 802.11 WEP support 257#device wlan_amrr # AMRR 258 259# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 260# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 261# mode (the factory default). If you set the switches on your ISA 262# card for a manually chosen I/O address and IRQ, you must specify 263# those parameters here. 264device an 265device ral # Ralink Technology 802.11 wireless NIC 266#device rtw # RealTek 802.11 wireless NIC 267# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 268# exists only as a PCMCIA device, so there is no ISA attachment needed 269# and resources will always be dynamically assigned by the pccard code. 270device wi 271 272# The probe order of these is presently determined by i386/isa/isa_compat.c. 273device lnc0 at isa? disable port 0x280 irq 10 drq 0 274device cs0 at isa? disable port 0x300 275device sn0 at isa? disable port 0x300 irq 10 276 277# Pseudo devices - the number indicates how many units to allocate. 278pseudo-device loop # Network loopback 279pseudo-device ether # Ethernet support 280pseudo-device sl 1 # Kernel SLIP 281pseudo-device ppp 1 # Kernel PPP 282pseudo-device tun # Packet tunnel. 283pseudo-device pty # Pseudo-ttys (telnet etc) 284pseudo-device md # Memory "disks" 285pseudo-device gif # IPv6 and IPv4 tunneling 286pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 287 288# The `bpf' pseudo-device enables the Berkeley Packet Filter. 289# Be aware of the administrative consequences of enabling this! 290pseudo-device bpf #Berkeley packet filter 291 292pseudo-device crypto # core crypto support, used by wlan 293 294# USB support 295device uhci # UHCI PCI->USB interface 296device ohci # OHCI PCI->USB interface 297device usb # USB Bus (required) 298device ugen # Generic 299device uhid # "Human Interface Devices" 300device ukbd # Keyboard 301device ulpt # Printer 302device umass # Disks/Mass storage - Requires scbus and da 303device ums # Mouse 304device uscanner # Scanners 305device urio # Diamond Rio MP3 Player 306# USB Ethernet, requires mii 307device aue # ADMtek USB ethernet 308device axe # ASIX Electronics USB Ethernet 309device cue # CATC USB ethernet 310device kue # Kawasaki LSI USB ethernet 311device rue # RealTek 8150 based USB ethernet 312# USB wireless NICs, requires wlan, wlan_amrr 313#device rum # Ralink Technology RT2501USB/RT2601USB 314#device ural # Ralink Technology RT2500USB 315 316# FireWire support 317device firewire # FireWire bus code 318device sbp # SCSI over FireWire (Requires scbus and da) 319device fwe # Ethernet over FireWire (non-standard!) 320 321# MMC/SD 322device mmc 323device mmcsd 324device sdhci 325