xref: /dragonfly/sys/config/X86_64_GENERIC (revision 896f2e3a)
1#
2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6
7platform	pc64
8machine		x86_64
9machine_arch	x86_64
10cpu		HAMMER_CPU
11ident		X86_64_GENERIC
12maxusers	0
13#options	CPU_DISABLE_AVX
14
15makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
16
17options 	INET			#InterNETworking
18options 	INET6			#IPv6 communications protocols
19options 	HAMMER			#Hammer Filesystem
20options		NULLFS			#NULL filesystem
21options 	FFS			#Berkeley Fast Filesystem
22options 	FFS_ROOT		#FFS usable as root device [keep this!]
23options 	SOFTUPDATES		#Enable FFS soft updates support
24options 	UFS_DIRHASH		#Improve performance on big directories
25options 	MFS			#Memory Filesystem
26options 	TMPFS			#Temporary Filesystem
27options 	MD_ROOT			#MD is a potential root device
28options 	NFS			#Network Filesystem
29options 	NFS_ROOT		#NFS usable as root device, NFS required
30options 	MSDOSFS			#MSDOS Filesystem
31options 	CD9660			#ISO 9660 Filesystem
32options 	PROCFS			#Process filesystem
33#options 	COMPAT_43		#Compatible with BSD 4.3
34options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
35options		IFPOLL_ENABLE		# Support mixed interrupt-polling
36					# handling of network device drivers
37options 	UCONSOLE		#Allow users to grab the console
38options 	KTRACE			#ktrace(1) support
39options 	_KPOSIX_PRIORITY_SCHEDULING
40options 	ICMP_BANDLIM		#Rate limit bad replies
41options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
42options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
43					# output.  Adds ~128k to driver.
44options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
45					# output.  Adds ~215k to driver.
46options		DSCHED_FQ		# Fair-queuing disk scheduler
47
48# ALTQ
49options		ALTQ		#alternate queueing
50options		ALTQ_CBQ	#class based queueing
51options		ALTQ_RED	#random early detection
52options		ALTQ_RIO	#triple red for diffserv (needs RED)
53options		ALTQ_HFSC	#hierarchical fair service curve
54options		ALTQ_PRIQ	#priority queue
55options		ALTQ_FAIRQ	#fair queueing
56#options	ALTQ_NOPCC	#don't use processor cycle counter
57#options	ALTQ_DEBUG	#for debugging
58
59# Debugging for Development
60options 	DDB
61options 	DDB_TRACE
62options 	INVARIANTS
63
64device		isa
65device		pci
66
67# AHCI driver, this will override NATA for AHCI devices,
68# both drivers may be included.
69#
70device		ahci
71
72# SiI3124/3132 driver
73#
74device		sili
75
76# NEW-ATA (NATA) and ATAPI devices
77#
78device		nata
79device		natadisk		# ATA disk drives
80device		natapicd		# ATAPI CDROM drives
81device		natapifd		# ATAPI floppy drives
82device		natapist		# ATAPI tape drives
83device		natapicam		# Emulate ATAPI devices as SCSI
84device		nataraid		# support for ATA software RAID
85					# controllers
86options 	ATA_STATIC_ID		# Static device numbering
87
88# SCSI Controllers
89device		ahc		# AHA2940 and onboard AIC7xxx devices
90device		ahd		# AHA39320/29320 and onboard AIC79xx devices
91device		amd		# AMD 53C974 (Tekram DC-390(T))
92device		isp		# Qlogic family
93#device		ispfw		# Firmware for QLogic HBAs- normally a module
94device		mpt		# LSI-Logic MPT/Fusion
95device		mps		# LSI-Logic MPT-Fusion 2
96device		ncr		# NCR/Symbios Logic
97device		sym		# NCR/Symbios Logic (newer chipsets)
98options 	SYM_SETUP_LP_PROBE_MAP=0x40
99				# Allow ncr to attach legacy NCR devices when
100				# both sym and ncr are configured
101
102device		adv0	at isa?
103device		adw
104device		bt
105device		aic
106
107device		ncv		# NCR 53C500
108device		nsp		# Workbit Ninja SCSI-3
109device		stg		# TMC 18C30/18C50
110
111# SCSI peripherals
112device		scbus		# SCSI bus (required)
113device		da		# Direct Access (disks)
114device		sa		# Sequential Access (tape etc)
115device		cd		# CD
116device		pass		# Passthrough device (direct SCSI access)
117device		sg		# Passthrough device (linux scsi generic)
118
119# RAID controllers interfaced to the SCSI subsystem
120device		arcmsr		# Areca SATA II RAID
121device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
122device		ciss		# Compaq SmartRAID 5* series
123device		dpt		# DPT Smartcache - See LINT for options!
124device		"hpt27xx"	# Highpoint RocketRAID 27xx series
125device		hptiop		# Highpoint RocketRAID 3xxx series
126device		hptmv		# Highpoint RocketRAID 182x
127device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
128device		iir		# Intel Integrated RAID
129device		mly		# Mylex AcceleRAID/eXtremeRAID
130device		mrsas		# LSI MegaRAID SAS (Thunderbolt series and up)
131device		twa		# 3ware 9000 series PATA/SATA RAID
132device		tws		# 3ware 9750 series SATA/SAS RAID
133
134# RAID controllers
135device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
136device		aacp		# SCSI passthrough for aac (requires CAM)
137device		amr		# AMI MegaRAID
138device		amrp		# SCSI Passthrough interface (optional, CAM req.)
139device		ida		# Compaq Smart RAID
140device		ips		# IBM ServeRAID
141device		mlx		# Mylex DAC960 family
142device		mfi		# LSI MegaRAID SAS
143device		mfip		# LSI MegaRAID SAS passthrough, requires CAM
144device		twe		# 3ware Escalade 7000/8000's
145
146# VirtIO support
147device		virtio		# VirtIO core
148device		virtio_blk	# VirtIO disk driver
149device		vtnet		# VirtIO network driver
150device		virtio_pci	# VirtIO transport over PCI bus
151
152# atkbdc0 controls both the keyboard and the PS/2 mouse
153device		atkbdc0	at isa? port IO_KBD
154device		atkbd0	at atkbdc? irq 1
155device		psm0	at atkbdc? irq 12
156
157device		vga0	at isa?
158
159# kbdmux is the keyboard multiplexer
160device		kbdmux
161
162# splash screen/screen saver
163pseudo-device	splash
164
165# syscons is the default console driver, resembling an SCO console
166device		sc0	at isa? flags 0x100
167options 	SC_PIXEL_MODE		# add support for the raster text mode
168
169device		agp		# support several AGP chipsets
170
171# Intel performance-energy bias
172device		perfbias
173# Intel software controlled clock modulation
174device		clockmod
175
176# HW monitoring devices
177#device		aps0	at isa? port 0x1600
178device		lm0	at isa? port 0x290
179device		it0	at isa?	port 0x290
180device		it1	at isa?	port 0xc00
181device		it2	at isa?	port 0xd00
182device		it3	at isa?	port 0x228
183device		wbsio0	at isa? port 0x2e
184device		wbsio1	at isa? port 0x4e
185device		lm#3	at wbsio?
186# Intel Core and newer CPUs on-die digital thermal sensor support
187device		coretemp
188device		dimm		# DIMM information (location, etc.)
189device		coremctl	# support Intel Core and E3 memory controller
190device		ecc		# support AMD8000, Intel E3 and Intel E5 ECC
191				# requires coremctl and dimm.
192device		memtemp		# support Intel Core, E3 and E5 memory thermal
193				# sensor.
194				# requires coremctl and dimm.
195
196# PCCARD (PCMCIA) support
197device		pccard
198device		cardbus
199device		cbb
200
201# Serial (COM) ports
202device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
203device		sio1	at isa? port IO_COM2 irq 3
204device		sio2	at isa? disable port IO_COM3 irq 5
205device		sio3	at isa? disable port IO_COM4 irq 9
206
207# PCI Ethernet NICs.
208device		de		# DEC/Intel DC21x4x (``Tulip'')
209device		txp		# 3Com 3cR990 (``Typhoon'')
210device		vx		# 3Com 3c590, 3c595 (``Vortex'')
211
212device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
213				# Requires ig_hal
214device		igb		# Intel Pro/1000 (82575, 82576, 82580, i350)
215				# Requires ig_hal
216device		ig_hal		# Intel PRO/1000 hardware abstraction layer
217device		ix		# Intel PRO/10GbE PCIE Ethernet Family
218
219device		oce		# Emulex OneConnect 10Gb
220
221# PCI Ethernet NICs that use the common MII bus controller code.
222# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
223device		miibus		# MII bus support
224device		ae		# Attansic/Atheros L2 Fast Ethernet
225device		age		# Attansic/Atheros L1 Gigabit Ethernet
226device		alc		# Atheros AR8131/AR8132
227device		ale		# Atheros AR8121/AR8113/AR8114
228device		bce		# Broadcom NetXtreme II Gigabit Ethernet
229device		bfe		# Broadcom BCM440x 10/100 Ethernet
230device		bnx		# Broadcom NetXtreme 5718/57785 Gigabit Ethernet
231device		dc		# DEC/Intel 21143 and various workalikes
232device		et		# Agere ET1310 10/100/1000 Ethernet
233device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
234device		jme		# JMicron Gigabit/Fast Ethernet
235device		pcn		# AMD Am79C97x PCI 10/100 NICs
236device		rl		# RealTek 8129/8139
237device		re		# RealTek 8139C+/8169
238device		sf		# Adaptec AIC-6915 (``Starfire'')
239device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
240device		sk		# SysKonnect GEnesis, LinkSys EG1023, D-Link
241device		ste		# Sundance ST201 (D-Link DFE-550TX)
242device		tl		# Texas Instruments ThunderLAN
243device		tx		# SMC EtherPower II (83c170 ``EPIC'')
244device		vge		# VIA 612x GigE
245device		vr		# VIA Rhine, Rhine II
246device		wb		# Winbond W89C840F
247device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
248device		bge		# Broadcom BCM570x (``Tigon III'')
249device		stge		# Sundance/Tamarack TC9021 Gigabit Ethernet
250device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
251device		nfe		# NVIDIA nForce MCP 10/100/Gigabit Ethernet
252device		ex
253device		xe		# Xircom Ethernet
254
255# Wireless NIC cards
256options 	IEEE80211_DEBUG		#enable debugging msgs
257options 	IEEE80211_SUPPORT_MESH	#enable 802.11s D3.0 support
258options 	IEEE80211_SUPPORT_TDMA	#enable TDMA support
259device		wlan		# 802.11 support
260device		wlan_ccmp	# 802.11 CCMP support
261device		wlan_tkip	# 802.11 TKIP support
262device		wlan_wep	# 802.11 WEP support
263#device		wlan_amrr	# AMRR
264
265# Aironet 4500/4800 802.11 wireless NICs.  Note: the declaration below will
266# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
267# mode (the factory default). If you set the switches on your ISA
268# card for a manually chosen I/O address and IRQ, you must specify
269# those parameters here.
270device		an
271device		ath		# Atheros NICs
272device		ath_hal		# Atheros Hardware Access Layer
273options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
274device		ath_rate_sample	# Atheros Sample TX rate control algorithm
275device		siba_bwn	# Sonic Inc. Silicon Backplane needed for bwn
276device		bwn		# Broadcom BCM43xx NICs using v4 firmware
277device		ral		# Ralink Technology 802.11 wireless NIC
278device		iwn		# Intel
279#device		rtw		# RealTek 802.11 wireless NIC
280# WaveLAN/IEEE 802.11 wireless NICs.  Note: the WaveLAN/IEEE really
281# exists only as a PCMCIA device, so there is no ISA attachment needed
282# and resources will always be dynamically assigned by the pccard code.
283device		wi
284
285device		lnc0	at isa? disable port 0x280 irq 10 drq 0
286device		cs0	at isa? disable port 0x300
287device		sn0	at isa? disable port 0x300 irq 10
288
289# Pseudo devices - the number indicates how many units to allocate.
290pseudo-device	loop		# Network loopback
291pseudo-device	ether		# Ethernet support
292pseudo-device	sl	1	# Kernel SLIP
293pseudo-device	ppp	1	# Kernel PPP
294pseudo-device	tun		# Packet tunnel.
295pseudo-device	pty		# Pseudo-ttys (telnet etc)
296pseudo-device	md		# Memory "disks"
297pseudo-device	vn		# File image "disks"
298pseudo-device	gif		# IPv6 and IPv4 tunneling
299pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)
300pseudo-device   lagg
301
302# CARP support
303options		CARP
304pseudo-device	carp
305
306# The `bpf' pseudo-device enables the Berkeley Packet Filter.
307# Be aware of the administrative consequences of enabling this!
308pseudo-device	bpf		#Berkeley packet filter
309
310device		crypto		# core crypto support, used by wlan
311device		cryptodev	# /dev/crypto for access to h/w
312
313# USB support
314#
315device		usb		# USB Bus (required)
316device		uhci		# UHCI PCI->USB interface
317device		ohci		# OHCI PCI->USB interface
318device		uhid		# "Human Interface Devices"
319device		ukbd		# Keyboard
320device		ulpt		# Printer
321device		umass		# Disks/Mass storage - Requires scbus and da
322device		ums		# Mouse
323# USB Ethernet, requires mii
324device		axe		# ASIX Electronics USB Ethernet
325device		aue		# ADMtek USB ethernet
326device		cue		# CATC USB ethernet
327device		kue		# Kawasaki LSI USB ethernet
328# USB wireless NICs, requires wlan, wlan_amrr
329#device		rum		# Ralink Technology RT2501USB/RT2601USB
330
331# FireWire support
332device		firewire	# FireWire bus code
333device		sbp		# SCSI over FireWire (Requires scbus and da)
334device		fwe		# Ethernet over FireWire (non-standard!)
335
336# MMC/SD
337device		mmc
338device		mmcsd
339device		sdhci
340
341# RNG
342#
343device          aesni           # hardware crypto/RNG for AES-NI
344#device          glxsb           # Geode LX Security Block
345device          padlock         # hardware crypto/RNG for VIA C3/C7/Eden
346device          rdrand          # hardware RNG for RdRand
347