1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13#options CPU_DISABLE_AVX 14 15makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 16 17options INET #InterNETworking 18options INET6 #IPv6 communications protocols 19options HAMMER #Hammer Filesystem 20options NULLFS #NULL filesystem 21options FFS #Berkeley Fast Filesystem 22options FFS_ROOT #FFS usable as root device [keep this!] 23options SOFTUPDATES #Enable FFS soft updates support 24options UFS_DIRHASH #Improve performance on big directories 25options MFS #Memory Filesystem 26options TMPFS #Temporary Filesystem 27options MD_ROOT #MD is a potential root device 28options NFS #Network Filesystem 29options NFS_ROOT #NFS usable as root device, NFS required 30options MSDOSFS #MSDOS Filesystem 31options CD9660 #ISO 9660 Filesystem 32options PROCFS #Process filesystem 33#options COMPAT_43 #Compatible with BSD 4.3 34options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 35options IFPOLL_ENABLE # Support mixed interrupt-polling 36 # handling of network device drivers 37options UCONSOLE #Allow users to grab the console 38options KTRACE #ktrace(1) support 39options P1003_1B #Posix P1003_1B real-time extensions 40options _KPOSIX_PRIORITY_SCHEDULING 41options ICMP_BANDLIM #Rate limit bad replies 42options KBD_INSTALL_CDEV # install a CDEV entry in /dev 43options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 44 # output. Adds ~128k to driver. 45options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 46 # output. Adds ~215k to driver. 47options DSCHED_FQ # Fair-queuing disk scheduler 48 49# ALTQ 50options ALTQ #alternate queueing 51options ALTQ_CBQ #class based queueing 52options ALTQ_RED #random early detection 53options ALTQ_RIO #triple red for diffserv (needs RED) 54options ALTQ_HFSC #hierarchical fair service curve 55options ALTQ_PRIQ #priority queue 56options ALTQ_FAIRQ #fair queueing 57#options ALTQ_NOPCC #don't use processor cycle counter 58#options ALTQ_DEBUG #for debugging 59 60# Debugging for Development 61options DDB 62options DDB_TRACE 63options INVARIANTS 64 65device isa 66device pci 67 68# AHCI driver, this will override NATA for AHCI devices, 69# both drivers may be included. 70# 71device ahci 72 73# SiI3124/3132 driver 74# 75device sili 76 77# NEW-ATA (NATA) and ATAPI devices 78# 79device nata 80device natadisk # ATA disk drives 81device natapicd # ATAPI CDROM drives 82device natapifd # ATAPI floppy drives 83device natapist # ATAPI tape drives 84device natapicam # Emulate ATAPI devices as SCSI 85device nataraid # support for ATA software RAID 86 # controllers 87options ATA_STATIC_ID # Static device numbering 88 89# SCSI Controllers 90device ahc # AHA2940 and onboard AIC7xxx devices 91device ahd # AHA39320/29320 and onboard AIC79xx devices 92device amd # AMD 53C974 (Tekram DC-390(T)) 93device isp # Qlogic family 94#device ispfw # Firmware for QLogic HBAs- normally a module 95device mpt # LSI-Logic MPT/Fusion 96device mps # LSI-Logic MPT-Fusion 2 97device ncr # NCR/Symbios Logic 98device sym # NCR/Symbios Logic (newer chipsets) 99options SYM_SETUP_LP_PROBE_MAP=0x40 100 # Allow ncr to attach legacy NCR devices when 101 # both sym and ncr are configured 102 103device adv0 at isa? 104device adw 105device bt 106device aic 107 108device ncv # NCR 53C500 109device nsp # Workbit Ninja SCSI-3 110device stg # TMC 18C30/18C50 111 112# SCSI peripherals 113device scbus # SCSI bus (required) 114device da # Direct Access (disks) 115device sa # Sequential Access (tape etc) 116device cd # CD 117device pass # Passthrough device (direct SCSI access) 118device sg # Passthrough device (linux scsi generic) 119 120# RAID controllers interfaced to the SCSI subsystem 121device arcmsr # Areca SATA II RAID 122device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 123device ciss # Compaq SmartRAID 5* series 124device dpt # DPT Smartcache - See LINT for options! 125device "hpt27xx" # Highpoint RocketRAID 27xx series 126device hptiop # Highpoint RocketRAID 3xxx series 127device hptmv # Highpoint RocketRAID 182x 128device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx 129device iir # Intel Integrated RAID 130device mly # Mylex AcceleRAID/eXtremeRAID 131device mrsas # LSI MegaRAID SAS (Thunderbolt series and up) 132device twa # 3ware 9000 series PATA/SATA RAID 133device tws # 3ware 9750 series SATA/SAS RAID 134 135# RAID controllers 136device aac # Adaptec FSA RAID, Dell PERC2/PERC3 137device aacp # SCSI passthrough for aac (requires CAM) 138device amr # AMI MegaRAID 139device amrp # SCSI Passthrough interface (optional, CAM req.) 140device ida # Compaq Smart RAID 141device ips # IBM ServeRAID 142device mlx # Mylex DAC960 family 143device mfi # LSI MegaRAID SAS 144device mfip # LSI MegaRAID SAS passthrough, requires CAM 145device twe # 3ware Escalade 7000/8000's 146 147# VirtIO support 148device virtio # VirtIO core 149device virtio_blk # VirtIO disk driver 150device vtnet # VirtIO network driver 151device virtio_pci # VirtIO transport over PCI bus 152 153# atkbdc0 controls both the keyboard and the PS/2 mouse 154device atkbdc0 at isa? port IO_KBD 155device atkbd0 at atkbdc? irq 1 156device psm0 at atkbdc? irq 12 157 158device vga0 at isa? 159 160# kbdmux is the keyboard multiplexer 161device kbdmux 162 163# splash screen/screen saver 164pseudo-device splash 165 166# syscons is the default console driver, resembling an SCO console 167device sc0 at isa? flags 0x100 168options SC_PIXEL_MODE # add support for the raster text mode 169 170device agp # support several AGP chipsets 171 172# Intel performance-energy bias 173device perfbias 174# Intel software controlled clock modulation 175device clockmod 176 177# HW monitoring devices 178#device aps0 at isa? port 0x1600 179device lm0 at isa? port 0x290 180device it0 at isa? port 0x290 181device it1 at isa? port 0xc00 182device it2 at isa? port 0xd00 183device it3 at isa? port 0x228 184device wbsio0 at isa? port 0x2e 185device wbsio1 at isa? port 0x4e 186device lm#3 at wbsio? 187# Intel Core and newer CPUs on-die digital thermal sensor support 188device coretemp 189 190# PCCARD (PCMCIA) support 191device pccard 192device cardbus 193device cbb 194 195# Serial (COM) ports 196device sio0 at isa? port IO_COM1 flags 0x10 irq 4 197device sio1 at isa? port IO_COM2 irq 3 198device sio2 at isa? disable port IO_COM3 irq 5 199device sio3 at isa? disable port IO_COM4 irq 9 200 201# Parallel port 202device ppc0 at isa? irq 7 203device ppbus # Parallel port bus (required) 204device lpt # Printer 205device plip # TCP/IP over parallel 206device ppi # Parallel port interface device 207#device vpo # Requires scbus and da 208 209# PCI Ethernet NICs. 210device de # DEC/Intel DC21x4x (``Tulip'') 211device txp # 3Com 3cR990 (``Typhoon'') 212device vx # 3Com 3c590, 3c595 (``Vortex'') 213 214device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 215 # Requires ig_hal 216device igb # Intel Pro/1000 (82575, 82576, 82580, i350) 217 # Requires ig_hal 218device ig_hal # Intel PRO/1000 hardware abstraction layer 219device ix # Intel PRO/10GbE PCIE Ethernet Family 220 221device oce # Emulex OneConnect 10Gb 222 223# PCI Ethernet NICs that use the common MII bus controller code. 224# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 225device miibus # MII bus support 226device ae # Attansic/Atheros L2 Fast Ethernet 227device age # Attansic/Atheros L1 Gigabit Ethernet 228device alc # Atheros AR8131/AR8132 229device ale # Atheros AR8121/AR8113/AR8114 230device bce # Broadcom NetXtreme II Gigabit Ethernet 231device bfe # Broadcom BCM440x 10/100 Ethernet 232device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet 233device dc # DEC/Intel 21143 and various workalikes 234device et # Agere ET1310 10/100/1000 Ethernet 235device fxp # Intel EtherExpress PRO/100B (82557, 82558) 236device jme # JMicron Gigabit/Fast Ethernet 237device pcn # AMD Am79C97x PCI 10/100 NICs 238device rl # RealTek 8129/8139 239device re # RealTek 8139C+/8169 240device sf # Adaptec AIC-6915 (``Starfire'') 241device sis # Silicon Integrated Systems SiS 900/SiS 7016 242device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 243device ste # Sundance ST201 (D-Link DFE-550TX) 244device tl # Texas Instruments ThunderLAN 245device tx # SMC EtherPower II (83c170 ``EPIC'') 246device vge # VIA 612x GigE 247device vr # VIA Rhine, Rhine II 248device wb # Winbond W89C840F 249device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 250device bge # Broadcom BCM570x (``Tigon III'') 251device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 252device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 253device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 254device ex 255device xe # Xircom Ethernet 256 257# Wireless NIC cards 258options IEEE80211_DEBUG #enable debugging msgs 259options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 260options IEEE80211_SUPPORT_TDMA #enable TDMA support 261device wlan # 802.11 support 262device wlan_ccmp # 802.11 CCMP support 263device wlan_tkip # 802.11 TKIP support 264device wlan_wep # 802.11 WEP support 265#device wlan_amrr # AMRR 266 267# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 268# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 269# mode (the factory default). If you set the switches on your ISA 270# card for a manually chosen I/O address and IRQ, you must specify 271# those parameters here. 272device an 273device ath # Atheros NICs 274device ath_hal # Atheros Hardware Access Layer 275options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors 276device ath_rate_sample # Atheros Sample TX rate control algorithm 277device siba_bwn # Sonic Inc. Silicon Backplane needed for bwn 278device bwn # Broadcom BCM43xx NICs using v4 firmware 279device ral # Ralink Technology 802.11 wireless NIC 280device iwn # Intel 281#device rtw # RealTek 802.11 wireless NIC 282# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 283# exists only as a PCMCIA device, so there is no ISA attachment needed 284# and resources will always be dynamically assigned by the pccard code. 285device wi 286 287device lnc0 at isa? disable port 0x280 irq 10 drq 0 288device cs0 at isa? disable port 0x300 289device sn0 at isa? disable port 0x300 irq 10 290 291# Pseudo devices - the number indicates how many units to allocate. 292pseudo-device loop # Network loopback 293pseudo-device ether # Ethernet support 294pseudo-device sl 1 # Kernel SLIP 295pseudo-device ppp 1 # Kernel PPP 296pseudo-device tun # Packet tunnel. 297pseudo-device pty # Pseudo-ttys (telnet etc) 298pseudo-device md # Memory "disks" 299pseudo-device gif # IPv6 and IPv4 tunneling 300pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 301 302# CARP support 303options CARP 304pseudo-device carp 305 306# The `bpf' pseudo-device enables the Berkeley Packet Filter. 307# Be aware of the administrative consequences of enabling this! 308pseudo-device bpf #Berkeley packet filter 309 310pseudo-device crypto # core crypto support, used by wlan 311 312# USB support 313# 314# NOTE: If you enable 'oldusb' you must also disable 'usb' and rebuild 315# the world with WANT_OLDUSB=true in /etc/make.conf, in addition 316# to rebuilding the kernel. 317# 318#device oldusb # use this instead of usb for the old stack 319#device natausb # ATA-over-USB support (oldusb) 320#device ugen # Generic (oldusb) 321#device uscanner # Scanners (oldusb) 322#device urio # Diamond Rio MP3 Player (oldusb) 323#device aue # ADMtek USB ethernet (oldusb) 324#device cue # CATC USB ethernet (oldusb) 325#device kue # Kawasaki LSI USB ethernet (oldusb) 326#device rue # RealTek 8150 based USB ethernet (oldusb) 327 328device usb # USB Bus (required) 329device uhci # UHCI PCI->USB interface 330device ohci # OHCI PCI->USB interface 331device uhid # "Human Interface Devices" 332device ukbd # Keyboard 333device ulpt # Printer 334device umass # Disks/Mass storage - Requires scbus and da 335device ums # Mouse 336# USB Ethernet, requires mii 337device axe # ASIX Electronics USB Ethernet 338# USB wireless NICs, requires wlan, wlan_amrr 339#device rum # Ralink Technology RT2501USB/RT2601USB 340#device ural # Ralink Technology RT2500USB 341 342# FireWire support 343device firewire # FireWire bus code 344device sbp # SCSI over FireWire (Requires scbus and da) 345device fwe # Ethernet over FireWire (non-standard!) 346 347# MMC/SD 348device mmc 349device mmcsd 350device sdhci 351 352# RNG 353# 354device aesni # hardware crypto/RNG for AES-NI 355#device glxsb # Geode LX Security Block 356device padlock # hardware crypto/RNG for VIA C3/C7/Eden 357device rdrand # hardware RNG for RdRand 358