1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13 14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 15 16options INET #InterNETworking 17options INET6 #IPv6 communications protocols 18options HAMMER #Hammer Filesystem 19options NULLFS #NULL filesystem 20options FFS #Berkeley Fast Filesystem 21options FFS_ROOT #FFS usable as root device [keep this!] 22options SOFTUPDATES #Enable FFS soft updates support 23options UFS_DIRHASH #Improve performance on big directories 24options MFS #Memory Filesystem 25options TMPFS #Temporary Filesystem 26options MD_ROOT #MD is a potential root device 27options NFS #Network Filesystem 28options NFS_ROOT #NFS usable as root device, NFS required 29options MSDOSFS #MSDOS Filesystem 30options CD9660 #ISO 9660 Filesystem 31options PROCFS #Process filesystem 32options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 33options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 34options DEVICE_POLLING # Support mixed interrupt-polling 35 # handling of network device drivers 36options UCONSOLE #Allow users to grab the console 37options KTRACE #ktrace(1) support 38options SYSVSHM #SYSV-style shared memory 39options SYSVMSG #SYSV-style message queues 40options SYSVSEM #SYSV-style semaphores 41options P1003_1B #Posix P1003_1B real-time extensions 42options _KPOSIX_PRIORITY_SCHEDULING 43options ICMP_BANDLIM #Rate limit bad replies 44options KBD_INSTALL_CDEV # install a CDEV entry in /dev 45options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 46 # output. Adds ~128k to driver. 47options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 48 # output. Adds ~215k to driver. 49options DSCHED_FQ # Fair-queuing disk scheduler 50 51# ALTQ 52options ALTQ #alternate queueing 53options ALTQ_CBQ #class based queueing 54options ALTQ_RED #random early detection 55options ALTQ_RIO #triple red for diffserv (needs RED) 56options ALTQ_HFSC #hierarchical fair service curve 57options ALTQ_PRIQ #priority queue 58options ALTQ_FAIRQ #fair queueing 59#options ALTQ_NOPCC #don't use processor cycle counter 60#options ALTQ_DEBUG #for debugging 61 62 63# SMP boxes with severely broken BIOSes which 64# boot fine for non-SMP builds *might* work in SMP mode 65# if you disable APIC_IO by setting the loader tunable 66# hw.apic_io_enable to 0. 67# 68#options SMP # Symmetric MultiProcessor Kernel 69 70# Debugging for Development 71options DDB 72options DDB_TRACE 73options INVARIANTS 74 75device isa 76device pci 77 78# AHCI driver, this will override NATA for AHCI devices, 79# both drivers may be included. 80# 81device ahci 82 83# SiI3124/3132 driver 84# 85device sili 86 87# NEW-ATA (NATA) and ATAPI devices 88# 89device nata 90device natadisk # ATA disk drives 91device natapicd # ATAPI CDROM drives 92device natapifd # ATAPI floppy drives 93device natapist # ATAPI tape drives 94device natapicam # Emulate ATAPI devices as SCSI 95device nataraid # support for ATA software RAID 96 # controllers 97device natausb # ATA-over-USB support 98options ATA_STATIC_ID # Static device numbering 99 100# LEGACY ATA and ATAPI devices 101#device ata0 at isa? port IO_WD1 irq 14 102#device ata1 at isa? port IO_WD2 irq 15 103#device ata 104#device atadisk # ATA disk drives 105#device atapicd # ATAPI CDROM drives 106#device atapifd # ATAPI floppy drives 107#device atapist # ATAPI tape drives 108#device atapicam # Emulate ATAPI devices as SCSI via CAM 109#options ATA_STATIC_ID #Static device numbering 110 111# SCSI Controllers 112device ahb # EISA AHA1742 family 113device ahc # AHA2940 and onboard AIC7xxx devices 114device ahd # AHA39320/29320 and onboard AIC79xx devices 115device amd # AMD 53C974 (Tekram DC-390(T)) 116device isp # Qlogic family 117device mpt # LSI-Logic MPT/Fusion 118device ncr # NCR/Symbios Logic 119device sym # NCR/Symbios Logic (newer chipsets) 120options SYM_SETUP_LP_PROBE_MAP=0x40 121 # Allow ncr to attach legacy NCR devices when 122 # both sym and ncr are configured 123 124device adv0 at isa? 125device adw 126device bt0 at isa? 127device aha0 at isa? 128device aic0 at isa? 129 130device ncv # NCR 53C500 131device nsp # Workbit Ninja SCSI-3 132device stg # TMC 18C30/18C50 133 134# SCSI peripherals 135device scbus # SCSI bus (required) 136device da # Direct Access (disks) 137device sa # Sequential Access (tape etc) 138device cd # CD 139device pass # Passthrough device (direct SCSI access) 140device sg # Passthrough device (linux scsi generic) 141 142# RAID controllers interfaced to the SCSI subsystem 143device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 144device dpt # DPT Smartcache - See LINT for options! 145device iir # Intel Integrated RAID 146device mly # Mylex AcceleRAID/eXtremeRAID 147device ciss # Compaq SmartRAID 5* series 148 149# RAID controllers 150device aac # Adaptec FSA RAID, Dell PERC2/PERC3 151#device aacp # SCSI passthrough for aac (requires CAM) 152device ida # Compaq Smart RAID 153device ips # IBM ServeRAID 154device amr # AMI MegaRAID 155device mlx # Mylex DAC960 family 156device twe # 3ware Escalade 7000/8000's 157device twa # 3ware 9000 series PATA/SATA RAID 158 159# 160# Areca RAID (CAM is required). 161# 162device arcmsr # Areca SATA II RAID 163 164# atkbdc0 controls both the keyboard and the PS/2 mouse 165device atkbdc0 at isa? port IO_KBD 166device atkbd0 at atkbdc? irq 1 flags 0x1 167device psm0 at atkbdc? irq 12 168 169device vga0 at isa? 170 171# kbdmux is the keyboard multiplexer 172device kbdmux 173 174# splash screen/screen saver 175pseudo-device splash 176 177# syscons is the default console driver, resembling an SCO console 178device sc0 at isa? flags 0x100 179options SC_PIXEL_MODE # add support for the raster text mode 180 181device agp # support several AGP chipsets 182 183# HW monitoring devices 184device aps0 at isa? port 0x1600 185device lm0 at isa? port 0x290 186device it0 at isa? port 0x290 187device it1 at isa? port 0xc00 188device it2 at isa? port 0xd00 189device it3 at isa? port 0x228 190device wbsio0 at isa? port 0x2e 191device wbsio1 at isa? port 0x4e 192device lm#3 at wbsio? 193 194# PCCARD (PCMCIA) support 195device pccard 196device cardbus 197device cbb 198 199# Serial (COM) ports 200device sio0 at isa? port IO_COM1 flags 0x10 irq 4 201device sio1 at isa? port IO_COM2 irq 3 202device sio2 at isa? disable port IO_COM3 irq 5 203device sio3 at isa? disable port IO_COM4 irq 9 204 205# Parallel port 206device ppc0 at isa? irq 7 207device ppbus # Parallel port bus (required) 208device lpt # Printer 209device plip # TCP/IP over parallel 210device ppi # Parallel port interface device 211#device vpo # Requires scbus and da 212 213 214# PCI Ethernet NICs. 215device de # DEC/Intel DC21x4x (``Tulip'') 216device txp # 3Com 3cR990 (``Typhoon'') 217device vx # 3Com 3c590, 3c595 (``Vortex'') 218 219device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 220 # Requires ig_hal 221device ig_hal # Intel PRO/1000 hardware abstraction layer 222 223# PCI Ethernet NICs that use the common MII bus controller code. 224# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 225device miibus # MII bus support 226device ae # Attansic/Atheros L2 Fast Ethernet 227device age # Attansic/Atheros L1 Gigabit Ethernet 228device alc # Atheros AR8131/AR8132 229device ale # Atheros AR8121/AR8113/AR8114 230device bce # Broadcom NetXtreme II Gigabit Ethernet 231device bfe # Broadcom BCM440x 10/100 Ethernet 232device dc # DEC/Intel 21143 and various workalikes 233device et # Agere ET1310 10/100/1000 Ethernet 234device fxp # Intel EtherExpress PRO/100B (82557, 82558) 235device jme # JMicron Gigabit/Fast Ethernet 236device pcn # AMD Am79C97x PCI 10/100 NICs 237device rl # RealTek 8129/8139 238device re # RealTek 8139C+/8169 239device sf # Adaptec AIC-6915 (``Starfire'') 240device sis # Silicon Integrated Systems SiS 900/SiS 7016 241device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 242device ste # Sundance ST201 (D-Link DFE-550TX) 243device tl # Texas Instruments ThunderLAN 244device tx # SMC EtherPower II (83c170 ``EPIC'') 245device vge # VIA 612x GigE 246device vr # VIA Rhine, Rhine II 247device wb # Winbond W89C840F 248device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 249device bge # Broadcom BCM570x (``Tigon III'') 250device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 251device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 252device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 253 254# ISA Ethernet NICs. 255# 'device ed' requires 'device miibus' 256device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 257device ex 258# Xircom Ethernet 259device xe 260 261# Wireless NIC cards 262options IEEE80211_DEBUG #enable debugging msgs 263options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 264options IEEE80211_SUPPORT_TDMA #enable TDMA support 265device wlan # 802.11 support 266device wlan_ccmp # 802.11 CCMP support 267device wlan_tkip # 802.11 TKIP support 268device wlan_wep # 802.11 WEP support 269#device wlan_amrr # AMRR 270 271# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 272# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 273# mode (the factory default). If you set the switches on your ISA 274# card for a manually chosen I/O address and IRQ, you must specify 275# those parameters here. 276device an 277device ral # Ralink Technology 802.11 wireless NIC 278#device rtw # RealTek 802.11 wireless NIC 279# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 280# exists only as a PCMCIA device, so there is no ISA attachment needed 281# and resources will always be dynamically assigned by the pccard code. 282device wi 283 284# The probe order of these is presently determined by i386/isa/isa_compat.c. 285#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000 286device lnc0 at isa? disable port 0x280 irq 10 drq 0 287device cs0 at isa? disable port 0x300 288device sn0 at isa? disable port 0x300 irq 10 289 290# Pseudo devices - the number indicates how many units to allocate. 291pseudo-device loop # Network loopback 292pseudo-device ether # Ethernet support 293pseudo-device sl 1 # Kernel SLIP 294pseudo-device ppp 1 # Kernel PPP 295pseudo-device tun # Packet tunnel. 296pseudo-device pty # Pseudo-ttys (telnet etc) 297pseudo-device md # Memory "disks" 298pseudo-device gif # IPv6 and IPv4 tunneling 299pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 300 301# The `bpf' pseudo-device enables the Berkeley Packet Filter. 302# Be aware of the administrative consequences of enabling this! 303pseudo-device bpf #Berkeley packet filter 304 305pseudo-device crypto # core crypto support, used by wlan 306 307# USB support 308device uhci # UHCI PCI->USB interface 309device ohci # OHCI PCI->USB interface 310device usb # USB Bus (required) 311device ugen # Generic 312device uhid # "Human Interface Devices" 313device ukbd # Keyboard 314device ulpt # Printer 315device umass # Disks/Mass storage - Requires scbus and da 316device ums # Mouse 317device uscanner # Scanners 318device urio # Diamond Rio MP3 Player 319# USB Ethernet, requires mii 320device aue # ADMtek USB ethernet 321device axe # ASIX Electronics USB Ethernet 322device cue # CATC USB ethernet 323device kue # Kawasaki LSI USB ethernet 324device rue # RealTek 8150 based USB ethernet 325# USB wireless NICs, requires wlan, wlan_amrr 326#device rum # Ralink Technology RT2501USB/RT2601USB 327#device ural # Ralink Technology RT2500USB 328 329# FireWire support 330device firewire # FireWire bus code 331device sbp # SCSI over FireWire (Requires scbus and da) 332device fwe # Ethernet over FireWire (non-standard!) 333