1 /******************************************************************************
2  *
3  * Module Name: dtio.c - File I/O support for data table compiler
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2014, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #define __DTIO_C__
45 
46 #include "aslcompiler.h"
47 #include "dtcompiler.h"
48 #include "acapps.h"
49 
50 #define _COMPONENT          DT_COMPILER
51         ACPI_MODULE_NAME    ("dtio")
52 
53 
54 /* Local prototypes */
55 
56 static char *
57 DtTrim (
58     char                    *String);
59 
60 static void
61 DtLinkField (
62     DT_FIELD                *Field);
63 
64 static ACPI_STATUS
65 DtParseLine (
66     char                    *LineBuffer,
67     UINT32                  Line,
68     UINT32                  Offset);
69 
70 static void
71 DtWriteBinary (
72     DT_SUBTABLE             *Subtable,
73     void                    *Context,
74     void                    *ReturnValue);
75 
76 static void
77 DtDumpBuffer (
78     UINT32                  FileId,
79     UINT8                   *Buffer,
80     UINT32                  Offset,
81     UINT32                  Length);
82 
83 static void
84 DtDumpSubtableInfo (
85     DT_SUBTABLE             *Subtable,
86     void                    *Context,
87     void                    *ReturnValue);
88 
89 static void
90 DtDumpSubtableTree (
91     DT_SUBTABLE             *Subtable,
92     void                    *Context,
93     void                    *ReturnValue);
94 
95 
96 /* States for DtGetNextLine */
97 
98 #define DT_NORMAL_TEXT              0
99 #define DT_START_QUOTED_STRING      1
100 #define DT_START_COMMENT            2
101 #define DT_SLASH_ASTERISK_COMMENT   3
102 #define DT_SLASH_SLASH_COMMENT      4
103 #define DT_END_COMMENT              5
104 #define DT_MERGE_LINES              6
105 #define DT_ESCAPE_SEQUENCE          7
106 
107 static UINT32  Gbl_NextLineOffset;
108 
109 
110 /******************************************************************************
111  *
112  * FUNCTION:    DtTrim
113  *
114  * PARAMETERS:  String              - Current source code line to trim
115  *
116  * RETURN:      Trimmed line. Must be freed by caller.
117  *
118  * DESCRIPTION: Trim left and right spaces
119  *
120  *****************************************************************************/
121 
122 static char *
123 DtTrim (
124     char                    *String)
125 {
126     char                    *Start;
127     char                    *End;
128     char                    *ReturnString;
129     ACPI_SIZE               Length;
130 
131 
132     /* Skip lines that start with a space */
133 
134     if (!ACPI_STRCMP (String, " "))
135     {
136         ReturnString = UtStringCacheCalloc (1);
137         return (ReturnString);
138     }
139 
140     /* Setup pointers to start and end of input string */
141 
142     Start = String;
143     End = String + ACPI_STRLEN (String) - 1;
144 
145     /* Find first non-whitespace character */
146 
147     while ((Start <= End) && ((*Start == ' ') || (*Start == '\t')))
148     {
149         Start++;
150     }
151 
152     /* Find last non-space character */
153 
154     while (End >= Start)
155     {
156         if (*End == '\r' || *End == '\n')
157         {
158             End--;
159             continue;
160         }
161 
162         if (*End != ' ')
163         {
164             break;
165         }
166 
167         End--;
168     }
169 
170     /* Remove any quotes around the string */
171 
172     if (*Start == '\"')
173     {
174         Start++;
175     }
176     if (*End == '\"')
177     {
178         End--;
179     }
180 
181     /* Create the trimmed return string */
182 
183     Length = ACPI_PTR_DIFF (End, Start) + 1;
184     ReturnString = UtStringCacheCalloc (Length + 1);
185     if (ACPI_STRLEN (Start))
186     {
187         ACPI_STRNCPY (ReturnString, Start, Length);
188     }
189 
190     ReturnString[Length] = 0;
191     return (ReturnString);
192 }
193 
194 
195 /******************************************************************************
196  *
197  * FUNCTION:    DtLinkField
198  *
199  * PARAMETERS:  Field               - New field object to link
200  *
201  * RETURN:      None
202  *
203  * DESCRIPTION: Link one field name and value to the list
204  *
205  *****************************************************************************/
206 
207 static void
208 DtLinkField (
209     DT_FIELD                *Field)
210 {
211     DT_FIELD                *Prev;
212     DT_FIELD                *Next;
213 
214 
215     Prev = Next = Gbl_FieldList;
216 
217     while (Next)
218     {
219         Prev = Next;
220         Next = Next->Next;
221     }
222 
223     if (Prev)
224     {
225         Prev->Next = Field;
226     }
227     else
228     {
229         Gbl_FieldList = Field;
230     }
231 }
232 
233 
234 /******************************************************************************
235  *
236  * FUNCTION:    DtParseLine
237  *
238  * PARAMETERS:  LineBuffer          - Current source code line
239  *              Line                - Current line number in the source
240  *              Offset              - Current byte offset of the line
241  *
242  * RETURN:      Status
243  *
244  * DESCRIPTION: Parse one source line
245  *
246  *****************************************************************************/
247 
248 static ACPI_STATUS
249 DtParseLine (
250     char                    *LineBuffer,
251     UINT32                  Line,
252     UINT32                  Offset)
253 {
254     char                    *Start;
255     char                    *End;
256     char                    *TmpName;
257     char                    *TmpValue;
258     char                    *Name;
259     char                    *Value;
260     char                    *Colon;
261     UINT32                  Length;
262     DT_FIELD                *Field;
263     UINT32                  Column;
264     UINT32                  NameColumn;
265     BOOLEAN                 IsNullString = FALSE;
266 
267 
268     if (!LineBuffer)
269     {
270         return (AE_OK);
271     }
272 
273     /* All lines after "Raw Table Data" are ingored */
274 
275     if (strstr (LineBuffer, ACPI_RAW_TABLE_DATA_HEADER))
276     {
277         return (AE_NOT_FOUND);
278     }
279 
280     Colon = strchr (LineBuffer, ':');
281     if (!Colon)
282     {
283         return (AE_OK);
284     }
285 
286     Start = LineBuffer;
287     End = Colon;
288 
289     while (Start < Colon)
290     {
291         if (*Start == '[')
292         {
293             /* Found left bracket, go to the right bracket */
294 
295             while (Start < Colon && *Start != ']')
296             {
297                 Start++;
298             }
299         }
300         else if (*Start != ' ')
301         {
302             break;
303         }
304 
305         Start++;
306     }
307 
308     /*
309      * There are two column values. One for the field name,
310      * and one for the field value.
311      */
312     Column = ACPI_PTR_DIFF (Colon, LineBuffer) + 3;
313     NameColumn = ACPI_PTR_DIFF (Start, LineBuffer) + 1;
314 
315     Length = ACPI_PTR_DIFF (End, Start);
316 
317     TmpName = UtLocalCalloc (Length + 1);
318     ACPI_STRNCPY (TmpName, Start, Length);
319     Name = DtTrim (TmpName);
320     ACPI_FREE (TmpName);
321 
322     Start = End = (Colon + 1);
323     while (*End)
324     {
325         /* Found left quotation, go to the right quotation and break */
326 
327         if (*End == '"')
328         {
329             End++;
330 
331             /* Check for an explicit null string */
332 
333             if (*End == '"')
334             {
335                 IsNullString = TRUE;
336             }
337             while (*End && (*End != '"'))
338             {
339                 End++;
340             }
341 
342             End++;
343             break;
344         }
345 
346         /*
347          * Special "comment" fields at line end, ignore them.
348          * Note: normal slash-slash and slash-asterisk comments are
349          * stripped already by the DtGetNextLine parser.
350          *
351          * TBD: Perhaps DtGetNextLine should parse the following type
352          * of comments also.
353          */
354         if (*End == '[')
355         {
356             End--;
357             break;
358         }
359         End++;
360     }
361 
362     Length = ACPI_PTR_DIFF (End, Start);
363     TmpValue = UtLocalCalloc (Length + 1);
364 
365     ACPI_STRNCPY (TmpValue, Start, Length);
366     Value = DtTrim (TmpValue);
367     ACPI_FREE (TmpValue);
368 
369     /* Create a new field object only if we have a valid value field */
370 
371     if ((Value && *Value) || IsNullString)
372     {
373         Field = UtFieldCacheCalloc ();
374         Field->Name = Name;
375         Field->Value = Value;
376         Field->Line = Line;
377         Field->ByteOffset = Offset;
378         Field->NameColumn = NameColumn;
379         Field->Column = Column;
380 
381         DtLinkField (Field);
382     }
383     /* Else -- Ignore this field, it has no valid data */
384 
385     return (AE_OK);
386 }
387 
388 
389 /******************************************************************************
390  *
391  * FUNCTION:    DtGetNextLine
392  *
393  * PARAMETERS:  Handle              - Open file handle for the source file
394  *
395  * RETURN:      Filled line buffer and offset of start-of-line (ASL_EOF on EOF)
396  *
397  * DESCRIPTION: Get the next valid source line. Removes all comments.
398  *              Ignores empty lines.
399  *
400  * Handles both slash-asterisk and slash-slash comments.
401  * Also, quoted strings, but no escapes within.
402  *
403  * Line is returned in Gbl_CurrentLineBuffer.
404  * Line number in original file is returned in Gbl_CurrentLineNumber.
405  *
406  *****************************************************************************/
407 
408 UINT32
409 DtGetNextLine (
410     FILE                    *Handle)
411 {
412     BOOLEAN                 LineNotAllBlanks = FALSE;
413     UINT32                  State = DT_NORMAL_TEXT;
414     UINT32                  CurrentLineOffset;
415     UINT32                  i;
416     int                     c;
417 
418 
419     for (i = 0; ;)
420     {
421         /*
422          * If line is too long, expand the line buffers. Also increases
423          * Gbl_LineBufferSize.
424          */
425         if (i >= Gbl_LineBufferSize)
426         {
427             UtExpandLineBuffers ();
428         }
429 
430         c = getc (Handle);
431         if (c == EOF)
432         {
433             switch (State)
434             {
435             case DT_START_QUOTED_STRING:
436             case DT_SLASH_ASTERISK_COMMENT:
437 
438                 AcpiOsPrintf ("**** EOF within comment/string %u\n", State);
439                 break;
440 
441             default:
442 
443                 break;
444             }
445 
446             /* Standalone EOF is OK */
447 
448             if (i == 0)
449             {
450                 return (ASL_EOF);
451             }
452 
453             /*
454              * Received an EOF in the middle of a line. Terminate the
455              * line with a newline. The next call to this function will
456              * return a standalone EOF. Thus, the upper parsing software
457              * never has to deal with an EOF within a valid line (or
458              * the last line does not get tossed on the floor.)
459              */
460             c = '\n';
461             State = DT_NORMAL_TEXT;
462         }
463 
464         switch (State)
465         {
466         case DT_NORMAL_TEXT:
467 
468             /* Normal text, insert char into line buffer */
469 
470             Gbl_CurrentLineBuffer[i] = (char) c;
471             switch (c)
472             {
473             case '/':
474 
475                 State = DT_START_COMMENT;
476                 break;
477 
478             case '"':
479 
480                 State = DT_START_QUOTED_STRING;
481                 LineNotAllBlanks = TRUE;
482                 i++;
483                 break;
484 
485             case '\\':
486                 /*
487                  * The continuation char MUST be last char on this line.
488                  * Otherwise, it will be assumed to be a valid ASL char.
489                  */
490                 State = DT_MERGE_LINES;
491                 break;
492 
493             case '\n':
494 
495                 CurrentLineOffset = Gbl_NextLineOffset;
496                 Gbl_NextLineOffset = (UINT32) ftell (Handle);
497                 Gbl_CurrentLineNumber++;
498 
499                 /*
500                  * Exit if line is complete. Ignore empty lines (only \n)
501                  * or lines that contain nothing but blanks.
502                  */
503                 if ((i != 0) && LineNotAllBlanks)
504                 {
505                     if ((i + 1) >= Gbl_LineBufferSize)
506                     {
507                         UtExpandLineBuffers ();
508                     }
509 
510                     Gbl_CurrentLineBuffer[i+1] = 0; /* Terminate string */
511                     return (CurrentLineOffset);
512                 }
513 
514                 /* Toss this line and start a new one */
515 
516                 i = 0;
517                 LineNotAllBlanks = FALSE;
518                 break;
519 
520             default:
521 
522                 if (c != ' ')
523                 {
524                     LineNotAllBlanks = TRUE;
525                 }
526 
527                 i++;
528                 break;
529             }
530             break;
531 
532         case DT_START_QUOTED_STRING:
533 
534             /* Insert raw chars until end of quoted string */
535 
536             Gbl_CurrentLineBuffer[i] = (char) c;
537             i++;
538 
539             switch (c)
540             {
541             case '"':
542 
543                 State = DT_NORMAL_TEXT;
544                 break;
545 
546             case '\\':
547 
548                 State = DT_ESCAPE_SEQUENCE;
549                 break;
550 
551             case '\n':
552 
553                 AcpiOsPrintf ("ERROR at line %u: Unterminated quoted string\n",
554                     Gbl_CurrentLineNumber++);
555                 State = DT_NORMAL_TEXT;
556                 break;
557 
558             default:    /* Get next character */
559 
560                 break;
561             }
562             break;
563 
564         case DT_ESCAPE_SEQUENCE:
565 
566             /* Just copy the escaped character. TBD: sufficient for table compiler? */
567 
568             Gbl_CurrentLineBuffer[i] = (char) c;
569             i++;
570             State = DT_START_QUOTED_STRING;
571             break;
572 
573         case DT_START_COMMENT:
574 
575             /* Open comment if this character is an asterisk or slash */
576 
577             switch (c)
578             {
579             case '*':
580 
581                 State = DT_SLASH_ASTERISK_COMMENT;
582                 break;
583 
584             case '/':
585 
586                 State = DT_SLASH_SLASH_COMMENT;
587                 break;
588 
589             default:    /* Not a comment */
590 
591                 i++;    /* Save the preceding slash */
592                 if (i >= Gbl_LineBufferSize)
593                 {
594                     UtExpandLineBuffers ();
595                 }
596 
597                 Gbl_CurrentLineBuffer[i] = (char) c;
598                 i++;
599                 State = DT_NORMAL_TEXT;
600                 break;
601             }
602             break;
603 
604         case DT_SLASH_ASTERISK_COMMENT:
605 
606             /* Ignore chars until an asterisk-slash is found */
607 
608             switch (c)
609             {
610             case '\n':
611 
612                 Gbl_NextLineOffset = (UINT32) ftell (Handle);
613                 Gbl_CurrentLineNumber++;
614                 break;
615 
616             case '*':
617 
618                 State = DT_END_COMMENT;
619                 break;
620 
621             default:
622 
623                 break;
624             }
625             break;
626 
627         case DT_SLASH_SLASH_COMMENT:
628 
629             /* Ignore chars until end-of-line */
630 
631             if (c == '\n')
632             {
633                 /* We will exit via the NORMAL_TEXT path */
634 
635                 ungetc (c, Handle);
636                 State = DT_NORMAL_TEXT;
637             }
638             break;
639 
640         case DT_END_COMMENT:
641 
642             /* End comment if this char is a slash */
643 
644             switch (c)
645             {
646             case '/':
647 
648                 State = DT_NORMAL_TEXT;
649                 break;
650 
651             case '\n':
652 
653                 CurrentLineOffset = Gbl_NextLineOffset;
654                 Gbl_NextLineOffset = (UINT32) ftell (Handle);
655                 Gbl_CurrentLineNumber++;
656                 break;
657 
658             case '*':
659 
660                 /* Consume all adjacent asterisks */
661                 break;
662 
663             default:
664 
665                 State = DT_SLASH_ASTERISK_COMMENT;
666                 break;
667             }
668             break;
669 
670         case DT_MERGE_LINES:
671 
672             if (c != '\n')
673             {
674                 /*
675                  * This is not a continuation backslash, it is a normal
676                  * normal ASL backslash - for example: Scope(\_SB_)
677                  */
678                 i++; /* Keep the backslash that is already in the buffer */
679 
680                 ungetc (c, Handle);
681                 State = DT_NORMAL_TEXT;
682             }
683             else
684             {
685                 /*
686                  * This is a continuation line -- a backlash followed
687                  * immediately by a newline. Insert a space between the
688                  * lines (overwrite the backslash)
689                  */
690                 Gbl_CurrentLineBuffer[i] = ' ';
691                 i++;
692 
693                 /* Ignore newline, this will merge the lines */
694 
695                 CurrentLineOffset = Gbl_NextLineOffset;
696                 Gbl_NextLineOffset = (UINT32) ftell (Handle);
697                 Gbl_CurrentLineNumber++;
698                 State = DT_NORMAL_TEXT;
699             }
700             break;
701 
702         default:
703 
704             DtFatal (ASL_MSG_COMPILER_INTERNAL, NULL, "Unknown input state");
705             return (ASL_EOF);
706         }
707     }
708 }
709 
710 
711 /******************************************************************************
712  *
713  * FUNCTION:    DtScanFile
714  *
715  * PARAMETERS:  Handle              - Open file handle for the source file
716  *
717  * RETURN:      Pointer to start of the constructed parse tree.
718  *
719  * DESCRIPTION: Scan source file, link all field names and values
720  *              to the global parse tree: Gbl_FieldList
721  *
722  *****************************************************************************/
723 
724 DT_FIELD *
725 DtScanFile (
726     FILE                    *Handle)
727 {
728     ACPI_STATUS             Status;
729     UINT32                  Offset;
730 
731 
732     ACPI_FUNCTION_NAME (DtScanFile);
733 
734 
735     /* Get the file size */
736 
737     Gbl_InputByteCount = CmGetFileSize (Handle);
738     if (Gbl_InputByteCount == ACPI_UINT32_MAX)
739     {
740         AslAbort ();
741     }
742 
743     Gbl_CurrentLineNumber = 0;
744     Gbl_CurrentLineOffset = 0;
745     Gbl_NextLineOffset = 0;
746 
747     /* Scan line-by-line */
748 
749     while ((Offset = DtGetNextLine (Handle)) != ASL_EOF)
750     {
751         ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Line %2.2u/%4.4X - %s",
752             Gbl_CurrentLineNumber, Offset, Gbl_CurrentLineBuffer));
753 
754         Status = DtParseLine (Gbl_CurrentLineBuffer, Gbl_CurrentLineNumber, Offset);
755         if (Status == AE_NOT_FOUND)
756         {
757             break;
758         }
759     }
760 
761     /* Dump the parse tree if debug enabled */
762 
763     DtDumpFieldList (Gbl_FieldList);
764     return (Gbl_FieldList);
765 }
766 
767 
768 /*
769  * Output functions
770  */
771 
772 /******************************************************************************
773  *
774  * FUNCTION:    DtWriteBinary
775  *
776  * PARAMETERS:  DT_WALK_CALLBACK
777  *
778  * RETURN:      Status
779  *
780  * DESCRIPTION: Write one subtable of a binary ACPI table
781  *
782  *****************************************************************************/
783 
784 static void
785 DtWriteBinary (
786     DT_SUBTABLE             *Subtable,
787     void                    *Context,
788     void                    *ReturnValue)
789 {
790 
791     FlWriteFile (ASL_FILE_AML_OUTPUT, Subtable->Buffer, Subtable->Length);
792 }
793 
794 
795 /******************************************************************************
796  *
797  * FUNCTION:    DtOutputBinary
798  *
799  * PARAMETERS:
800  *
801  * RETURN:      Status
802  *
803  * DESCRIPTION: Write entire binary ACPI table (result of compilation)
804  *
805  *****************************************************************************/
806 
807 void
808 DtOutputBinary (
809     DT_SUBTABLE             *RootTable)
810 {
811 
812     if (!RootTable)
813     {
814         return;
815     }
816 
817     /* Walk the entire parse tree, emitting the binary data */
818 
819     DtWalkTableTree (RootTable, DtWriteBinary, NULL, NULL);
820 
821     Gbl_TableLength = CmGetFileSize (Gbl_Files[ASL_FILE_AML_OUTPUT].Handle);
822     if (Gbl_TableLength == ACPI_UINT32_MAX)
823     {
824         AslAbort ();
825     }
826 }
827 
828 
829 /*
830  * Listing support
831  */
832 
833 /******************************************************************************
834  *
835  * FUNCTION:    DtDumpBuffer
836  *
837  * PARAMETERS:  FileID              - Where to write buffer data
838  *              Buffer              - Buffer to dump
839  *              Offset              - Offset in current table
840  *              Length              - Buffer Length
841  *
842  * RETURN:      None
843  *
844  * DESCRIPTION: Another copy of DumpBuffer routine (unfortunately).
845  *
846  * TBD: merge dump buffer routines
847  *
848  *****************************************************************************/
849 
850 static void
851 DtDumpBuffer (
852     UINT32                  FileId,
853     UINT8                   *Buffer,
854     UINT32                  Offset,
855     UINT32                  Length)
856 {
857     UINT32                  i;
858     UINT32                  j;
859     UINT8                   BufChar;
860 
861 
862     FlPrintFile (FileId, "Output: [%3.3Xh %4.4d %3d] ",
863         Offset, Offset, Length);
864 
865     i = 0;
866     while (i < Length)
867     {
868         if (i >= 16)
869         {
870             FlPrintFile (FileId, "%24s", "");
871         }
872 
873         /* Print 16 hex chars */
874 
875         for (j = 0; j < 16;)
876         {
877             if (i + j >= Length)
878             {
879                 /* Dump fill spaces */
880 
881                 FlPrintFile (FileId, "   ");
882                 j++;
883                 continue;
884             }
885 
886             FlPrintFile (FileId, "%02X ", Buffer[i+j]);
887             j++;
888         }
889 
890         FlPrintFile (FileId, " ");
891         for (j = 0; j < 16; j++)
892         {
893             if (i + j >= Length)
894             {
895                 FlPrintFile (FileId, "\n\n");
896                 return;
897             }
898 
899             BufChar = Buffer[(ACPI_SIZE) i + j];
900             if (ACPI_IS_PRINT (BufChar))
901             {
902                 FlPrintFile (FileId, "%c", BufChar);
903             }
904             else
905             {
906                 FlPrintFile (FileId, ".");
907             }
908         }
909 
910         /* Done with that line. */
911 
912         FlPrintFile (FileId, "\n");
913         i += 16;
914     }
915 
916     FlPrintFile (FileId, "\n\n");
917 }
918 
919 
920 /******************************************************************************
921  *
922  * FUNCTION:    DtDumpFieldList
923  *
924  * PARAMETERS:  Field               - Root field
925  *
926  * RETURN:      None
927  *
928  * DESCRIPTION: Dump the entire field list
929  *
930  *****************************************************************************/
931 
932 void
933 DtDumpFieldList (
934     DT_FIELD                *Field)
935 {
936 
937     if (!Gbl_DebugFlag || !Field)
938     {
939         return;
940     }
941 
942     DbgPrint (ASL_DEBUG_OUTPUT,  "\nField List:\n"
943         "LineNo   ByteOff  NameCol  Column   TableOff "
944         "Flags    %32s : %s\n\n", "Name", "Value");
945     while (Field)
946     {
947         DbgPrint (ASL_DEBUG_OUTPUT,
948             "%.08X %.08X %.08X %.08X %.08X %.08X %32s : %s\n",
949             Field->Line, Field->ByteOffset, Field->NameColumn,
950             Field->Column, Field->TableOffset, Field->Flags,
951             Field->Name, Field->Value);
952 
953         Field = Field->Next;
954     }
955 
956     DbgPrint (ASL_DEBUG_OUTPUT,  "\n\n");
957 }
958 
959 
960 /******************************************************************************
961  *
962  * FUNCTION:    DtDumpSubtableInfo, DtDumpSubtableTree
963  *
964  * PARAMETERS:  DT_WALK_CALLBACK
965  *
966  * RETURN:      None
967  *
968  * DESCRIPTION: Info - dump a subtable tree entry with extra information.
969  *              Tree - dump a subtable tree formatted by depth indentation.
970  *
971  *****************************************************************************/
972 
973 static void
974 DtDumpSubtableInfo (
975     DT_SUBTABLE             *Subtable,
976     void                    *Context,
977     void                    *ReturnValue)
978 {
979 
980     DbgPrint (ASL_DEBUG_OUTPUT,
981         "[%.04X] %.08X %.08X %.08X %.08X %.08X %p %p %p\n",
982         Subtable->Depth, Subtable->Length, Subtable->TotalLength,
983         Subtable->SizeOfLengthField, Subtable->Flags, Subtable,
984         Subtable->Parent, Subtable->Child, Subtable->Peer);
985 }
986 
987 static void
988 DtDumpSubtableTree (
989     DT_SUBTABLE             *Subtable,
990     void                    *Context,
991     void                    *ReturnValue)
992 {
993 
994     DbgPrint (ASL_DEBUG_OUTPUT,
995         "[%.04X] %*s%08X (%.02X) - (%.02X)\n",
996         Subtable->Depth, (4 * Subtable->Depth), " ",
997         Subtable, Subtable->Length, Subtable->TotalLength);
998 }
999 
1000 
1001 /******************************************************************************
1002  *
1003  * FUNCTION:    DtDumpSubtableList
1004  *
1005  * PARAMETERS:  None
1006  *
1007  * RETURN:      None
1008  *
1009  * DESCRIPTION: Dump the raw list of subtables with information, and also
1010  *              dump the subtable list in formatted tree format. Assists with
1011  *              the development of new table code.
1012  *
1013  *****************************************************************************/
1014 
1015 void
1016 DtDumpSubtableList (
1017     void)
1018 {
1019 
1020     if (!Gbl_DebugFlag || !Gbl_RootTable)
1021     {
1022         return;
1023     }
1024 
1025     DbgPrint (ASL_DEBUG_OUTPUT,
1026         "Subtable Info:\n"
1027         "Depth  Length   TotalLen LenSize  Flags    "
1028         "This     Parent   Child    Peer\n\n");
1029     DtWalkTableTree (Gbl_RootTable, DtDumpSubtableInfo, NULL, NULL);
1030 
1031     DbgPrint (ASL_DEBUG_OUTPUT,
1032         "\nSubtable Tree: (Depth, Subtable, Length, TotalLength)\n\n");
1033     DtWalkTableTree (Gbl_RootTable, DtDumpSubtableTree, NULL, NULL);
1034 
1035     DbgPrint (ASL_DEBUG_OUTPUT, "\n");
1036 }
1037 
1038 
1039 /******************************************************************************
1040  *
1041  * FUNCTION:    DtWriteFieldToListing
1042  *
1043  * PARAMETERS:  Buffer              - Contains the compiled data
1044  *              Field               - Field node for the input line
1045  *              Length              - Length of the output data
1046  *
1047  * RETURN:      None
1048  *
1049  * DESCRIPTION: Write one field to the listing file (if listing is enabled).
1050  *
1051  *****************************************************************************/
1052 
1053 void
1054 DtWriteFieldToListing (
1055     UINT8                   *Buffer,
1056     DT_FIELD                *Field,
1057     UINT32                  Length)
1058 {
1059     UINT8                   FileByte;
1060 
1061 
1062     if (!Gbl_ListingFlag || !Field)
1063     {
1064         return;
1065     }
1066 
1067     /* Dump the original source line */
1068 
1069     FlPrintFile (ASL_FILE_LISTING_OUTPUT, "Input:  ");
1070     FlSeekFile (ASL_FILE_INPUT, Field->ByteOffset);
1071 
1072     while (FlReadFile (ASL_FILE_INPUT, &FileByte, 1) == AE_OK)
1073     {
1074         FlWriteFile (ASL_FILE_LISTING_OUTPUT, &FileByte, 1);
1075         if (FileByte == '\n')
1076         {
1077             break;
1078         }
1079     }
1080 
1081     /* Dump the line as parsed and represented internally */
1082 
1083     FlPrintFile (ASL_FILE_LISTING_OUTPUT, "Parsed: %*s : %.64s",
1084         Field->Column-4, Field->Name, Field->Value);
1085 
1086     if (strlen (Field->Value) > 64)
1087     {
1088         FlPrintFile (ASL_FILE_LISTING_OUTPUT, "...Additional data, length 0x%X\n",
1089             strlen (Field->Value));
1090     }
1091     FlPrintFile (ASL_FILE_LISTING_OUTPUT, "\n");
1092 
1093     /* Dump the hex data that will be output for this field */
1094 
1095     DtDumpBuffer (ASL_FILE_LISTING_OUTPUT, Buffer, Field->TableOffset, Length);
1096 }
1097 
1098 
1099 /******************************************************************************
1100  *
1101  * FUNCTION:    DtWriteTableToListing
1102  *
1103  * PARAMETERS:  None
1104  *
1105  * RETURN:      None
1106  *
1107  * DESCRIPTION: Write the entire compiled table to the listing file
1108  *              in hex format
1109  *
1110  *****************************************************************************/
1111 
1112 void
1113 DtWriteTableToListing (
1114     void)
1115 {
1116     UINT8                   *Buffer;
1117 
1118 
1119     if (!Gbl_ListingFlag)
1120     {
1121         return;
1122     }
1123 
1124     /* Read the entire table from the output file */
1125 
1126     Buffer = UtLocalCalloc (Gbl_TableLength);
1127     FlSeekFile (ASL_FILE_AML_OUTPUT, 0);
1128     FlReadFile (ASL_FILE_AML_OUTPUT, Buffer, Gbl_TableLength);
1129 
1130     /* Dump the raw table data */
1131 
1132     AcpiOsRedirectOutput (Gbl_Files[ASL_FILE_LISTING_OUTPUT].Handle);
1133 
1134     AcpiOsPrintf ("\n%s: Length %d (0x%X)\n\n",
1135         ACPI_RAW_TABLE_DATA_HEADER, Gbl_TableLength, Gbl_TableLength);
1136     AcpiUtDumpBuffer (Buffer, Gbl_TableLength, DB_BYTE_DISPLAY, 0);
1137 
1138     AcpiOsRedirectOutput (stdout);
1139     ACPI_FREE (Buffer);
1140 }
1141