1 /****************************************************************************** 2 * 3 * Module Name: utaddress - OpRegion address range check 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2016, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include "acpi.h" 45 #include "accommon.h" 46 #include "acnamesp.h" 47 48 49 #define _COMPONENT ACPI_UTILITIES 50 ACPI_MODULE_NAME ("utaddress") 51 52 53 /******************************************************************************* 54 * 55 * FUNCTION: AcpiUtAddAddressRange 56 * 57 * PARAMETERS: SpaceId - Address space ID 58 * Address - OpRegion start address 59 * Length - OpRegion length 60 * RegionNode - OpRegion namespace node 61 * 62 * RETURN: Status 63 * 64 * DESCRIPTION: Add the Operation Region address range to the global list. 65 * The only supported Space IDs are Memory and I/O. Called when 66 * the OpRegion address/length operands are fully evaluated. 67 * 68 * MUTEX: Locks the namespace 69 * 70 * NOTE: Because this interface is only called when an OpRegion argument 71 * list is evaluated, there cannot be any duplicate RegionNodes. 72 * Duplicate Address/Length values are allowed, however, so that multiple 73 * address conflicts can be detected. 74 * 75 ******************************************************************************/ 76 77 ACPI_STATUS 78 AcpiUtAddAddressRange ( 79 ACPI_ADR_SPACE_TYPE SpaceId, 80 ACPI_PHYSICAL_ADDRESS Address, 81 UINT32 Length, 82 ACPI_NAMESPACE_NODE *RegionNode) 83 { 84 ACPI_ADDRESS_RANGE *RangeInfo; 85 86 87 ACPI_FUNCTION_TRACE (UtAddAddressRange); 88 89 90 if ((SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 91 (SpaceId != ACPI_ADR_SPACE_SYSTEM_IO)) 92 { 93 return_ACPI_STATUS (AE_OK); 94 } 95 96 /* Allocate/init a new info block, add it to the appropriate list */ 97 98 RangeInfo = ACPI_ALLOCATE (sizeof (ACPI_ADDRESS_RANGE)); 99 if (!RangeInfo) 100 { 101 return_ACPI_STATUS (AE_NO_MEMORY); 102 } 103 104 RangeInfo->StartAddress = Address; 105 RangeInfo->EndAddress = (Address + Length - 1); 106 RangeInfo->RegionNode = RegionNode; 107 108 RangeInfo->Next = AcpiGbl_AddressRangeList[SpaceId]; 109 AcpiGbl_AddressRangeList[SpaceId] = RangeInfo; 110 111 ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, 112 "\nAdded [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n", 113 AcpiUtGetNodeName (RangeInfo->RegionNode), 114 ACPI_FORMAT_UINT64 (Address), 115 ACPI_FORMAT_UINT64 (RangeInfo->EndAddress))); 116 117 return_ACPI_STATUS (AE_OK); 118 } 119 120 121 /******************************************************************************* 122 * 123 * FUNCTION: AcpiUtRemoveAddressRange 124 * 125 * PARAMETERS: SpaceId - Address space ID 126 * RegionNode - OpRegion namespace node 127 * 128 * RETURN: None 129 * 130 * DESCRIPTION: Remove the Operation Region from the global list. The only 131 * supported Space IDs are Memory and I/O. Called when an 132 * OpRegion is deleted. 133 * 134 * MUTEX: Assumes the namespace is locked 135 * 136 ******************************************************************************/ 137 138 void 139 AcpiUtRemoveAddressRange ( 140 ACPI_ADR_SPACE_TYPE SpaceId, 141 ACPI_NAMESPACE_NODE *RegionNode) 142 { 143 ACPI_ADDRESS_RANGE *RangeInfo; 144 ACPI_ADDRESS_RANGE *Prev; 145 146 147 ACPI_FUNCTION_TRACE (UtRemoveAddressRange); 148 149 150 if ((SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 151 (SpaceId != ACPI_ADR_SPACE_SYSTEM_IO)) 152 { 153 return_VOID; 154 } 155 156 /* Get the appropriate list head and check the list */ 157 158 RangeInfo = Prev = AcpiGbl_AddressRangeList[SpaceId]; 159 while (RangeInfo) 160 { 161 if (RangeInfo->RegionNode == RegionNode) 162 { 163 if (RangeInfo == Prev) /* Found at list head */ 164 { 165 AcpiGbl_AddressRangeList[SpaceId] = RangeInfo->Next; 166 } 167 else 168 { 169 Prev->Next = RangeInfo->Next; 170 } 171 172 ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, 173 "\nRemoved [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n", 174 AcpiUtGetNodeName (RangeInfo->RegionNode), 175 ACPI_FORMAT_UINT64 (RangeInfo->StartAddress), 176 ACPI_FORMAT_UINT64 (RangeInfo->EndAddress))); 177 178 ACPI_FREE (RangeInfo); 179 return_VOID; 180 } 181 182 Prev = RangeInfo; 183 RangeInfo = RangeInfo->Next; 184 } 185 186 return_VOID; 187 } 188 189 190 /******************************************************************************* 191 * 192 * FUNCTION: AcpiUtCheckAddressRange 193 * 194 * PARAMETERS: SpaceId - Address space ID 195 * Address - Start address 196 * Length - Length of address range 197 * Warn - TRUE if warning on overlap desired 198 * 199 * RETURN: Count of the number of conflicts detected. Zero is always 200 * returned for Space IDs other than Memory or I/O. 201 * 202 * DESCRIPTION: Check if the input address range overlaps any of the 203 * ASL operation region address ranges. The only supported 204 * Space IDs are Memory and I/O. 205 * 206 * MUTEX: Assumes the namespace is locked. 207 * 208 ******************************************************************************/ 209 210 UINT32 211 AcpiUtCheckAddressRange ( 212 ACPI_ADR_SPACE_TYPE SpaceId, 213 ACPI_PHYSICAL_ADDRESS Address, 214 UINT32 Length, 215 BOOLEAN Warn) 216 { 217 ACPI_ADDRESS_RANGE *RangeInfo; 218 ACPI_PHYSICAL_ADDRESS EndAddress; 219 char *Pathname; 220 UINT32 OverlapCount = 0; 221 222 223 ACPI_FUNCTION_TRACE (UtCheckAddressRange); 224 225 226 if ((SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) && 227 (SpaceId != ACPI_ADR_SPACE_SYSTEM_IO)) 228 { 229 return_UINT32 (0); 230 } 231 232 RangeInfo = AcpiGbl_AddressRangeList[SpaceId]; 233 EndAddress = Address + Length - 1; 234 235 /* Check entire list for all possible conflicts */ 236 237 while (RangeInfo) 238 { 239 /* 240 * Check if the requested address/length overlaps this 241 * address range. There are four cases to consider: 242 * 243 * 1) Input address/length is contained completely in the 244 * address range 245 * 2) Input address/length overlaps range at the range start 246 * 3) Input address/length overlaps range at the range end 247 * 4) Input address/length completely encompasses the range 248 */ 249 if ((Address <= RangeInfo->EndAddress) && 250 (EndAddress >= RangeInfo->StartAddress)) 251 { 252 /* Found an address range overlap */ 253 254 OverlapCount++; 255 if (Warn) /* Optional warning message */ 256 { 257 Pathname = AcpiNsGetNormalizedPathname (RangeInfo->RegionNode, TRUE); 258 259 ACPI_WARNING ((AE_INFO, 260 "%s range 0x%8.8X%8.8X-0x%8.8X%8.8X conflicts with OpRegion 0x%8.8X%8.8X-0x%8.8X%8.8X (%s)", 261 AcpiUtGetRegionName (SpaceId), 262 ACPI_FORMAT_UINT64 (Address), 263 ACPI_FORMAT_UINT64 (EndAddress), 264 ACPI_FORMAT_UINT64 (RangeInfo->StartAddress), 265 ACPI_FORMAT_UINT64 (RangeInfo->EndAddress), 266 Pathname)); 267 ACPI_FREE (Pathname); 268 } 269 } 270 271 RangeInfo = RangeInfo->Next; 272 } 273 274 return_UINT32 (OverlapCount); 275 } 276 277 278 /******************************************************************************* 279 * 280 * FUNCTION: AcpiUtDeleteAddressLists 281 * 282 * PARAMETERS: None 283 * 284 * RETURN: None 285 * 286 * DESCRIPTION: Delete all global address range lists (called during 287 * subsystem shutdown). 288 * 289 ******************************************************************************/ 290 291 void 292 AcpiUtDeleteAddressLists ( 293 void) 294 { 295 ACPI_ADDRESS_RANGE *Next; 296 ACPI_ADDRESS_RANGE *RangeInfo; 297 int i; 298 299 300 /* Delete all elements in all address range lists */ 301 302 for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) 303 { 304 Next = AcpiGbl_AddressRangeList[i]; 305 306 while (Next) 307 { 308 RangeInfo = Next; 309 Next = RangeInfo->Next; 310 ACPI_FREE (RangeInfo); 311 } 312 313 AcpiGbl_AddressRangeList[i] = NULL; 314 } 315 } 316