1 /*- 2 * Copyright (c) 2003-2005 Nate Lawson (SDG) 3 * Copyright (c) 2001 Michael Smith 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD: src/sys/dev/acpica/acpi_cpu.c,v 1.72 2008/04/12 12:06:00 rpaulo Exp $ 28 */ 29 30 #include "opt_acpi.h" 31 #include <sys/param.h> 32 #include <sys/bus.h> 33 #include <sys/kernel.h> 34 #include <sys/malloc.h> 35 #include <sys/globaldata.h> 36 #include <sys/power.h> 37 #include <sys/proc.h> 38 #include <sys/sbuf.h> 39 #include <sys/thread2.h> 40 #include <sys/mplock2.h> 41 42 #include <bus/pci/pcivar.h> 43 #include <machine/atomic.h> 44 #include <machine/globaldata.h> 45 #include <machine/md_var.h> 46 #include <machine/smp.h> 47 #include <sys/rman.h> 48 49 #include "acpi.h" 50 #include "acpivar.h" 51 #include "acpi_cpu.h" 52 53 /* 54 * Support for ACPI Processor devices, including C[1-3] sleep states. 55 */ 56 57 /* Hooks for the ACPI CA debugging infrastructure */ 58 #define _COMPONENT ACPI_PROCESSOR 59 ACPI_MODULE_NAME("PROCESSOR") 60 61 struct acpi_cx { 62 struct resource *p_lvlx; /* Register to read to enter state. */ 63 int rid; /* rid of p_lvlx */ 64 uint32_t type; /* C1-3 (C4 and up treated as C3). */ 65 uint32_t trans_lat; /* Transition latency (usec). */ 66 uint32_t power; /* Power consumed (mW). */ 67 int res_type; /* Resource type for p_lvlx. */ 68 }; 69 #define MAX_CX_STATES 8 70 71 struct acpi_cpu_softc { 72 device_t cpu_dev; 73 struct acpi_cpux_softc *cpu_parent; 74 ACPI_HANDLE cpu_handle; 75 struct mdglobaldata *md; 76 uint32_t cpu_acpi_id; /* ACPI processor id */ 77 uint32_t cpu_p_blk; /* ACPI P_BLK location */ 78 uint32_t cpu_p_blk_len; /* P_BLK length (must be 6). */ 79 struct acpi_cx cpu_cx_states[MAX_CX_STATES]; 80 int cpu_cx_count; /* Number of valid Cx states. */ 81 int cpu_prev_sleep;/* Last idle sleep duration. */ 82 /* Runtime state. */ 83 int cpu_non_c3; /* Index of lowest non-C3 state. */ 84 u_int cpu_cx_stats[MAX_CX_STATES];/* Cx usage history. */ 85 /* Values for sysctl. */ 86 int cpu_cx_lowest; 87 char cpu_cx_supported[64]; 88 }; 89 90 struct acpi_cpu_device { 91 struct resource_list ad_rl; 92 }; 93 94 #define CPU_GET_REG(reg, width) \ 95 (bus_space_read_ ## width(rman_get_bustag((reg)), \ 96 rman_get_bushandle((reg)), 0)) 97 #define CPU_SET_REG(reg, width, val) \ 98 (bus_space_write_ ## width(rman_get_bustag((reg)), \ 99 rman_get_bushandle((reg)), 0, (val))) 100 101 #define PM_USEC(x) ((x) >> 2) /* ~4 clocks per usec (3.57955 Mhz) */ 102 103 #define ACPI_NOTIFY_CX_STATES 0x81 /* _CST changed. */ 104 105 #define CPU_QUIRK_NO_C3 (1<<0) /* C3-type states are not usable. */ 106 #define CPU_QUIRK_NO_BM_CTRL (1<<2) /* No bus mastering control. */ 107 108 #define PCI_VENDOR_INTEL 0x8086 109 #define PCI_DEVICE_82371AB_3 0x7113 /* PIIX4 chipset for quirks. */ 110 #define PCI_REVISION_A_STEP 0 111 #define PCI_REVISION_B_STEP 1 112 #define PCI_REVISION_4E 2 113 #define PCI_REVISION_4M 3 114 #define PIIX4_DEVACTB_REG 0x58 115 #define PIIX4_BRLD_EN_IRQ0 (1<<0) 116 #define PIIX4_BRLD_EN_IRQ (1<<1) 117 #define PIIX4_BRLD_EN_IRQ8 (1<<5) 118 #define PIIX4_STOP_BREAK_MASK (PIIX4_BRLD_EN_IRQ0 | PIIX4_BRLD_EN_IRQ | PIIX4_BRLD_EN_IRQ8) 119 #define PIIX4_PCNTRL_BST_EN (1<<10) 120 121 /* Platform hardware resource information. */ 122 static uint32_t cpu_smi_cmd; /* Value to write to SMI_CMD. */ 123 static uint8_t cpu_cst_cnt; /* Indicate we are _CST aware. */ 124 static int cpu_quirks; /* Indicate any hardware bugs. */ 125 126 /* Runtime state. */ 127 static int cpu_disable_idle; /* Disable entry to idle function */ 128 static int cpu_cx_count; /* Number of valid Cx states */ 129 130 /* Values for sysctl. */ 131 static int cpu_cx_generic; 132 static int cpu_cx_lowest; 133 134 /* C3 state transition */ 135 static int cpu_c3_ncpus; 136 137 static device_t *cpu_devices; 138 static int cpu_ndevices; 139 static struct acpi_cpu_softc **cpu_softc; 140 141 static int acpi_cpu_cst_probe(device_t dev); 142 static int acpi_cpu_cst_attach(device_t dev); 143 static int acpi_cpu_cst_suspend(device_t dev); 144 static int acpi_cpu_cst_resume(device_t dev); 145 static struct resource_list *acpi_cpu_cst_get_rlist(device_t dev, 146 device_t child); 147 static device_t acpi_cpu_cst_add_child(device_t bus, device_t parent, 148 int order, const char *name, int unit); 149 static int acpi_cpu_cst_read_ivar(device_t dev, device_t child, 150 int index, uintptr_t *result); 151 static int acpi_cpu_cst_shutdown(device_t dev); 152 static void acpi_cpu_cx_probe(struct acpi_cpu_softc *sc); 153 static void acpi_cpu_generic_cx_probe(struct acpi_cpu_softc *sc); 154 static int acpi_cpu_cx_cst(struct acpi_cpu_softc *sc); 155 static void acpi_cpu_startup(void *arg); 156 static void acpi_cpu_startup_cx(struct acpi_cpu_softc *sc); 157 static void acpi_cpu_cx_list(struct acpi_cpu_softc *sc); 158 static void acpi_cpu_idle(void); 159 static void acpi_cpu_cst_notify(device_t); 160 static int acpi_cpu_quirks(void); 161 static int acpi_cpu_usage_sysctl(SYSCTL_HANDLER_ARGS); 162 static int acpi_cpu_set_cx_lowest(struct acpi_cpu_softc *sc, int val); 163 static int acpi_cpu_cx_lowest_sysctl(SYSCTL_HANDLER_ARGS); 164 static int acpi_cpu_global_cx_lowest_sysctl(SYSCTL_HANDLER_ARGS); 165 166 static void acpi_cpu_c1(void); /* XXX */ 167 168 static device_method_t acpi_cpu_cst_methods[] = { 169 /* Device interface */ 170 DEVMETHOD(device_probe, acpi_cpu_cst_probe), 171 DEVMETHOD(device_attach, acpi_cpu_cst_attach), 172 DEVMETHOD(device_detach, bus_generic_detach), 173 DEVMETHOD(device_shutdown, acpi_cpu_cst_shutdown), 174 DEVMETHOD(device_suspend, acpi_cpu_cst_suspend), 175 DEVMETHOD(device_resume, acpi_cpu_cst_resume), 176 177 /* Bus interface */ 178 DEVMETHOD(bus_add_child, acpi_cpu_cst_add_child), 179 DEVMETHOD(bus_read_ivar, acpi_cpu_cst_read_ivar), 180 DEVMETHOD(bus_get_resource_list, acpi_cpu_cst_get_rlist), 181 DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource), 182 DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource), 183 DEVMETHOD(bus_alloc_resource, bus_generic_rl_alloc_resource), 184 DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource), 185 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 186 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 187 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 188 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 189 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 190 {0, 0} 191 }; 192 193 static driver_t acpi_cpu_cst_driver = { 194 "cpu_cst", 195 acpi_cpu_cst_methods, 196 sizeof(struct acpi_cpu_softc), 197 }; 198 199 static devclass_t acpi_cpu_cst_devclass; 200 DRIVER_MODULE(cpu_cst, cpu, acpi_cpu_cst_driver, acpi_cpu_cst_devclass, NULL, NULL); 201 MODULE_DEPEND(cpu_cst, acpi, 1, 1, 1); 202 203 static int 204 acpi_cpu_cst_probe(device_t dev) 205 { 206 int cpu_id; 207 208 if (acpi_disabled("cpu_cst") || acpi_get_type(dev) != ACPI_TYPE_PROCESSOR) 209 return (ENXIO); 210 211 cpu_id = acpi_get_magic(dev); 212 213 if (cpu_softc == NULL) 214 cpu_softc = kmalloc(sizeof(struct acpi_cpu_softc *) * 215 SMP_MAXCPU, M_TEMP /* XXX */, M_INTWAIT | M_ZERO); 216 217 /* 218 * Check if we already probed this processor. We scan the bus twice 219 * so it's possible we've already seen this one. 220 */ 221 if (cpu_softc[cpu_id] != NULL) { 222 device_printf(dev, "CPU%d cstate already exist\n", cpu_id); 223 return (ENXIO); 224 } 225 226 /* Mark this processor as in-use and save our derived id for attach. */ 227 cpu_softc[cpu_id] = (void *)1; 228 device_set_desc(dev, "ACPI CPU C-State"); 229 230 return (0); 231 } 232 233 static int 234 acpi_cpu_cst_attach(device_t dev) 235 { 236 ACPI_BUFFER buf; 237 ACPI_OBJECT *obj; 238 struct mdglobaldata *md; 239 struct acpi_cpu_softc *sc; 240 ACPI_STATUS status; 241 int cpu_id; 242 243 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 244 245 sc = device_get_softc(dev); 246 sc->cpu_dev = dev; 247 sc->cpu_parent = device_get_softc(device_get_parent(dev)); 248 sc->cpu_handle = acpi_get_handle(dev); 249 cpu_id = acpi_get_magic(dev); 250 cpu_softc[cpu_id] = sc; 251 md = (struct mdglobaldata *)globaldata_find(device_get_unit(dev)); 252 sc->md = md; 253 cpu_smi_cmd = AcpiGbl_FADT.SmiCommand; 254 cpu_cst_cnt = AcpiGbl_FADT.CstControl; 255 256 buf.Pointer = NULL; 257 buf.Length = ACPI_ALLOCATE_BUFFER; 258 status = AcpiEvaluateObject(sc->cpu_handle, NULL, NULL, &buf); 259 if (ACPI_FAILURE(status)) { 260 device_printf(dev, "attach failed to get Processor obj - %s\n", 261 AcpiFormatException(status)); 262 return (ENXIO); 263 } 264 obj = (ACPI_OBJECT *)buf.Pointer; 265 sc->cpu_p_blk = obj->Processor.PblkAddress; 266 sc->cpu_p_blk_len = obj->Processor.PblkLength; 267 sc->cpu_acpi_id = obj->Processor.ProcId; 268 AcpiOsFree(obj); 269 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "acpi_cpu%d: P_BLK at %#x/%d\n", 270 device_get_unit(dev), sc->cpu_p_blk, sc->cpu_p_blk_len)); 271 272 /* 273 * If this is the first cpu we attach, create and initialize the generic 274 * resources that will be used by all acpi cpu devices. 275 */ 276 if (device_get_unit(dev) == 0) { 277 /* Assume we won't be using generic Cx mode by default */ 278 cpu_cx_generic = FALSE; 279 280 /* Queue post cpu-probing task handler */ 281 AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_cpu_startup, NULL); 282 } 283 284 /* Probe for Cx state support. */ 285 acpi_cpu_cx_probe(sc); 286 287 /* Finally, call identify and probe/attach for child devices. */ 288 bus_generic_probe(dev); 289 bus_generic_attach(dev); 290 291 return (0); 292 } 293 294 /* 295 * Disable any entry to the idle function during suspend and re-enable it 296 * during resume. 297 */ 298 static int 299 acpi_cpu_cst_suspend(device_t dev) 300 { 301 int error; 302 303 error = bus_generic_suspend(dev); 304 if (error) 305 return (error); 306 cpu_disable_idle = TRUE; 307 return (0); 308 } 309 310 static int 311 acpi_cpu_cst_resume(device_t dev) 312 { 313 314 cpu_disable_idle = FALSE; 315 return (bus_generic_resume(dev)); 316 } 317 318 static struct resource_list * 319 acpi_cpu_cst_get_rlist(device_t dev, device_t child) 320 { 321 struct acpi_cpu_device *ad; 322 323 ad = device_get_ivars(child); 324 if (ad == NULL) 325 return (NULL); 326 return (&ad->ad_rl); 327 } 328 329 static device_t 330 acpi_cpu_cst_add_child(device_t bus, device_t parent, int order, 331 const char *name, int unit) 332 { 333 struct acpi_cpu_device *ad; 334 device_t child; 335 336 if ((ad = kmalloc(sizeof(*ad), M_TEMP, M_NOWAIT | M_ZERO)) == NULL) 337 return (NULL); 338 339 resource_list_init(&ad->ad_rl); 340 341 child = device_add_child_ordered(parent, order, name, unit); 342 if (child != NULL) 343 device_set_ivars(child, ad); 344 else 345 kfree(ad, M_TEMP); 346 return (child); 347 } 348 349 static int 350 acpi_cpu_cst_read_ivar(device_t dev, device_t child, int index, 351 uintptr_t *result) 352 { 353 struct acpi_cpu_softc *sc; 354 355 sc = device_get_softc(dev); 356 switch (index) { 357 case ACPI_IVAR_HANDLE: 358 *result = (uintptr_t)sc->cpu_handle; 359 break; 360 #if 0 361 case CPU_IVAR_PCPU: 362 *result = (uintptr_t)sc->cpu_pcpu; 363 break; 364 #endif 365 default: 366 return (ENOENT); 367 } 368 return (0); 369 } 370 371 static int 372 acpi_cpu_cst_shutdown(device_t dev) 373 { 374 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 375 376 /* Allow children to shutdown first. */ 377 bus_generic_shutdown(dev); 378 379 /* 380 * Disable any entry to the idle function. There is a small race where 381 * an idle thread have passed this check but not gone to sleep. This 382 * is ok since device_shutdown() does not free the softc, otherwise 383 * we'd have to be sure all threads were evicted before returning. 384 */ 385 cpu_disable_idle = TRUE; 386 387 return_VALUE (0); 388 } 389 390 static void 391 acpi_cpu_cx_probe(struct acpi_cpu_softc *sc) 392 { 393 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 394 395 /* Use initial sleep value of 1 sec. to start with lowest idle state. */ 396 sc->cpu_prev_sleep = 1000000; 397 sc->cpu_cx_lowest = 0; 398 399 /* 400 * Check for the ACPI 2.0 _CST sleep states object. If we can't find 401 * any, we'll revert to generic FADT/P_BLK Cx control method which will 402 * be handled by acpi_cpu_startup. We need to defer to after having 403 * probed all the cpus in the system before probing for generic Cx 404 * states as we may already have found cpus with valid _CST packages 405 */ 406 if (!cpu_cx_generic && acpi_cpu_cx_cst(sc) != 0) { 407 /* 408 * We were unable to find a _CST package for this cpu or there 409 * was an error parsing it. Switch back to generic mode. 410 */ 411 cpu_cx_generic = TRUE; 412 if (bootverbose) 413 device_printf(sc->cpu_dev, "switching to generic Cx mode\n"); 414 } 415 416 /* 417 * TODO: _CSD Package should be checked here. 418 */ 419 } 420 421 static void 422 acpi_cpu_generic_cx_probe(struct acpi_cpu_softc *sc) 423 { 424 ACPI_GENERIC_ADDRESS gas; 425 struct acpi_cx *cx_ptr; 426 427 sc->cpu_cx_count = 0; 428 cx_ptr = sc->cpu_cx_states; 429 430 /* Use initial sleep value of 1 sec. to start with lowest idle state. */ 431 sc->cpu_prev_sleep = 1000000; 432 433 /* C1 has been required since just after ACPI 1.0 */ 434 cx_ptr->type = ACPI_STATE_C1; 435 cx_ptr->trans_lat = 0; 436 cx_ptr++; 437 sc->cpu_cx_count++; 438 439 /* 440 * The spec says P_BLK must be 6 bytes long. However, some systems 441 * use it to indicate a fractional set of features present so we 442 * take 5 as C2. Some may also have a value of 7 to indicate 443 * another C3 but most use _CST for this (as required) and having 444 * "only" C1-C3 is not a hardship. 445 */ 446 if (sc->cpu_p_blk_len < 5) 447 return; 448 449 /* Validate and allocate resources for C2 (P_LVL2). */ 450 gas.SpaceId = ACPI_ADR_SPACE_SYSTEM_IO; 451 gas.BitWidth = 8; 452 if (AcpiGbl_FADT.C2Latency <= 100) { 453 gas.Address = sc->cpu_p_blk + 4; 454 455 cx_ptr->rid = sc->cpu_parent->cpux_next_rid; 456 acpi_bus_alloc_gas(sc->cpu_dev, &cx_ptr->type, &cx_ptr->rid, &gas, &cx_ptr->p_lvlx, 457 RF_SHAREABLE); 458 if (cx_ptr->p_lvlx != NULL) { 459 sc->cpu_parent->cpux_next_rid++; 460 cx_ptr->type = ACPI_STATE_C2; 461 cx_ptr->trans_lat = AcpiGbl_FADT.C2Latency; 462 cx_ptr++; 463 sc->cpu_cx_count++; 464 } 465 } 466 if (sc->cpu_p_blk_len < 6) 467 return; 468 469 /* Validate and allocate resources for C3 (P_LVL3). */ 470 if (AcpiGbl_FADT.C3Latency <= 1000 && !(cpu_quirks & CPU_QUIRK_NO_C3)) { 471 gas.Address = sc->cpu_p_blk + 5; 472 473 cx_ptr->rid = sc->cpu_parent->cpux_next_rid; 474 acpi_bus_alloc_gas(sc->cpu_dev, &cx_ptr->type, &cx_ptr->rid, &gas, 475 &cx_ptr->p_lvlx, RF_SHAREABLE); 476 if (cx_ptr->p_lvlx != NULL) { 477 sc->cpu_parent->cpux_next_rid++; 478 cx_ptr->type = ACPI_STATE_C3; 479 cx_ptr->trans_lat = AcpiGbl_FADT.C3Latency; 480 cx_ptr++; 481 sc->cpu_cx_count++; 482 } 483 } 484 } 485 486 /* 487 * Parse a _CST package and set up its Cx states. Since the _CST object 488 * can change dynamically, our notify handler may call this function 489 * to clean up and probe the new _CST package. 490 */ 491 static int 492 acpi_cpu_cx_cst(struct acpi_cpu_softc *sc) 493 { 494 struct acpi_cx *cx_ptr; 495 ACPI_STATUS status; 496 ACPI_BUFFER buf; 497 ACPI_OBJECT *top; 498 ACPI_OBJECT *pkg; 499 uint32_t count; 500 int i; 501 502 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 503 504 buf.Pointer = NULL; 505 buf.Length = ACPI_ALLOCATE_BUFFER; 506 status = AcpiEvaluateObject(sc->cpu_handle, "_CST", NULL, &buf); 507 if (ACPI_FAILURE(status)) 508 return (ENXIO); 509 510 /* _CST is a package with a count and at least one Cx package. */ 511 top = (ACPI_OBJECT *)buf.Pointer; 512 if (!ACPI_PKG_VALID(top, 2) || acpi_PkgInt32(top, 0, &count) != 0) { 513 device_printf(sc->cpu_dev, "invalid _CST package\n"); 514 AcpiOsFree(buf.Pointer); 515 return (ENXIO); 516 } 517 if (count != top->Package.Count - 1) { 518 device_printf(sc->cpu_dev, "invalid _CST state count (%d != %d)\n", 519 count, top->Package.Count - 1); 520 count = top->Package.Count - 1; 521 } 522 if (count > MAX_CX_STATES) { 523 device_printf(sc->cpu_dev, "_CST has too many states (%d)\n", count); 524 count = MAX_CX_STATES; 525 } 526 527 /* Set up all valid states. */ 528 sc->cpu_cx_count = 0; 529 cx_ptr = sc->cpu_cx_states; 530 for (i = 0; i < count; i++) { 531 pkg = &top->Package.Elements[i + 1]; 532 if (!ACPI_PKG_VALID(pkg, 4) || 533 acpi_PkgInt32(pkg, 1, &cx_ptr->type) != 0 || 534 acpi_PkgInt32(pkg, 2, &cx_ptr->trans_lat) != 0 || 535 acpi_PkgInt32(pkg, 3, &cx_ptr->power) != 0) { 536 537 device_printf(sc->cpu_dev, "skipping invalid Cx state package\n"); 538 continue; 539 } 540 541 /* Validate the state to see if we should use it. */ 542 switch (cx_ptr->type) { 543 case ACPI_STATE_C1: 544 sc->cpu_non_c3 = i; 545 cx_ptr++; 546 sc->cpu_cx_count++; 547 continue; 548 case ACPI_STATE_C2: 549 sc->cpu_non_c3 = i; 550 break; 551 case ACPI_STATE_C3: 552 default: 553 if ((cpu_quirks & CPU_QUIRK_NO_C3) != 0) { 554 555 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 556 "acpi_cpu%d: C3[%d] not available.\n", 557 device_get_unit(sc->cpu_dev), i)); 558 continue; 559 } 560 break; 561 } 562 563 #ifdef notyet 564 /* Free up any previous register. */ 565 if (cx_ptr->p_lvlx != NULL) { 566 bus_release_resource(sc->cpu_dev, 0, 0, cx_ptr->p_lvlx); 567 cx_ptr->p_lvlx = NULL; 568 } 569 #endif 570 571 /* Allocate the control register for C2 or C3. */ 572 cx_ptr->rid = sc->cpu_parent->cpux_next_rid; 573 acpi_PkgGas(sc->cpu_dev, pkg, 0, &cx_ptr->res_type, &cx_ptr->rid, &cx_ptr->p_lvlx, 574 RF_SHAREABLE); 575 if (cx_ptr->p_lvlx) { 576 sc->cpu_parent->cpux_next_rid++; 577 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 578 "acpi_cpu%d: Got C%d - %d latency\n", 579 device_get_unit(sc->cpu_dev), cx_ptr->type, 580 cx_ptr->trans_lat)); 581 cx_ptr++; 582 sc->cpu_cx_count++; 583 } 584 } 585 AcpiOsFree(buf.Pointer); 586 587 return (0); 588 } 589 590 /* 591 * Call this *after* all CPUs have been attached. 592 */ 593 static void 594 acpi_cpu_startup(void *arg) 595 { 596 struct acpi_cpu_softc *sc; 597 int i; 598 599 /* Get set of CPU devices */ 600 devclass_get_devices(acpi_cpu_cst_devclass, &cpu_devices, &cpu_ndevices); 601 602 /* 603 * Setup any quirks that might necessary now that we have probed 604 * all the CPUs 605 */ 606 acpi_cpu_quirks(); 607 608 cpu_cx_count = 0; 609 if (cpu_cx_generic) { 610 /* 611 * We are using generic Cx mode, probe for available Cx states 612 * for all processors. 613 */ 614 for (i = 0; i < cpu_ndevices; i++) { 615 sc = device_get_softc(cpu_devices[i]); 616 acpi_cpu_generic_cx_probe(sc); 617 if (sc->cpu_cx_count > cpu_cx_count) 618 cpu_cx_count = sc->cpu_cx_count; 619 } 620 621 /* 622 * Find the highest Cx state common to all CPUs 623 * in the system, taking quirks into account. 624 */ 625 for (i = 0; i < cpu_ndevices; i++) { 626 sc = device_get_softc(cpu_devices[i]); 627 if (sc->cpu_cx_count < cpu_cx_count) 628 cpu_cx_count = sc->cpu_cx_count; 629 } 630 } else { 631 /* 632 * We are using _CST mode, remove C3 state if necessary. 633 * Update the largest Cx state supported in the global cpu_cx_count. 634 * It will be used in the global Cx sysctl handler. 635 * As we now know for sure that we will be using _CST mode 636 * install our notify handler. 637 */ 638 for (i = 0; i < cpu_ndevices; i++) { 639 sc = device_get_softc(cpu_devices[i]); 640 if (cpu_quirks & CPU_QUIRK_NO_C3) { 641 sc->cpu_cx_count = sc->cpu_non_c3 + 1; 642 } 643 if (sc->cpu_cx_count > cpu_cx_count) 644 cpu_cx_count = sc->cpu_cx_count; 645 sc->cpu_parent->cpux_cst_notify = acpi_cpu_cst_notify; 646 } 647 } 648 649 /* Perform Cx final initialization. */ 650 for (i = 0; i < cpu_ndevices; i++) { 651 sc = device_get_softc(cpu_devices[i]); 652 acpi_cpu_startup_cx(sc); 653 654 if (sc->cpu_parent->glob_sysctl_tree != NULL) { 655 struct acpi_cpux_softc *cpux = sc->cpu_parent; 656 657 /* Add a sysctl handler to handle global Cx lowest setting */ 658 SYSCTL_ADD_PROC(&cpux->glob_sysctl_ctx, 659 SYSCTL_CHILDREN(cpux->glob_sysctl_tree), 660 OID_AUTO, "cx_lowest", 661 CTLTYPE_STRING | CTLFLAG_RW, NULL, 0, 662 acpi_cpu_global_cx_lowest_sysctl, "A", 663 "Global lowest Cx sleep state to use"); 664 } 665 } 666 667 /* Take over idling from cpu_idle_default(). */ 668 cpu_cx_lowest = 0; 669 cpu_disable_idle = FALSE; 670 cpu_idle_hook = acpi_cpu_idle; 671 } 672 673 static void 674 acpi_cpu_cx_list(struct acpi_cpu_softc *sc) 675 { 676 struct sbuf sb; 677 int i; 678 679 /* 680 * Set up the list of Cx states 681 */ 682 sc->cpu_non_c3 = 0; 683 sbuf_new(&sb, sc->cpu_cx_supported, sizeof(sc->cpu_cx_supported), 684 SBUF_FIXEDLEN); 685 for (i = 0; i < sc->cpu_cx_count; i++) { 686 sbuf_printf(&sb, "C%d/%d ", i + 1, sc->cpu_cx_states[i].trans_lat); 687 if (sc->cpu_cx_states[i].type < ACPI_STATE_C3) 688 sc->cpu_non_c3 = i; 689 } 690 sbuf_trim(&sb); 691 sbuf_finish(&sb); 692 } 693 694 static void 695 acpi_cpu_startup_cx(struct acpi_cpu_softc *sc) 696 { 697 struct acpi_cpux_softc *cpux = sc->cpu_parent; 698 699 acpi_cpu_cx_list(sc); 700 701 SYSCTL_ADD_STRING(&cpux->pcpu_sysctl_ctx, 702 SYSCTL_CHILDREN(cpux->pcpu_sysctl_tree), 703 OID_AUTO, "cx_supported", CTLFLAG_RD, 704 sc->cpu_cx_supported, 0, 705 "Cx/microsecond values for supported Cx states"); 706 SYSCTL_ADD_PROC(&cpux->pcpu_sysctl_ctx, 707 SYSCTL_CHILDREN(cpux->pcpu_sysctl_tree), 708 OID_AUTO, "cx_lowest", CTLTYPE_STRING | CTLFLAG_RW, 709 (void *)sc, 0, acpi_cpu_cx_lowest_sysctl, "A", 710 "lowest Cx sleep state to use"); 711 SYSCTL_ADD_PROC(&cpux->pcpu_sysctl_ctx, 712 SYSCTL_CHILDREN(cpux->pcpu_sysctl_tree), 713 OID_AUTO, "cx_usage", CTLTYPE_STRING | CTLFLAG_RD, 714 (void *)sc, 0, acpi_cpu_usage_sysctl, "A", 715 "percent usage for each Cx state"); 716 717 #ifdef notyet 718 /* Signal platform that we can handle _CST notification. */ 719 if (!cpu_cx_generic && cpu_cst_cnt != 0) { 720 ACPI_LOCK(acpi); 721 AcpiOsWritePort(cpu_smi_cmd, cpu_cst_cnt, 8); 722 ACPI_UNLOCK(acpi); 723 } 724 #endif 725 } 726 727 /* 728 * Idle the CPU in the lowest state possible. This function is called with 729 * interrupts disabled. Note that once it re-enables interrupts, a task 730 * switch can occur so do not access shared data (i.e. the softc) after 731 * interrupts are re-enabled. 732 */ 733 static void 734 acpi_cpu_idle(void) 735 { 736 struct acpi_cpu_softc *sc; 737 struct acpi_cx *cx_next; 738 uint64_t start_time, end_time; 739 int bm_active, cx_next_idx, i; 740 741 /* If disabled, return immediately. */ 742 if (cpu_disable_idle) { 743 ACPI_ENABLE_IRQS(); 744 return; 745 } 746 747 /* 748 * Look up our CPU id to get our softc. If it's NULL, we'll use C1 749 * since there is no ACPI processor object for this CPU. This occurs 750 * for logical CPUs in the HTT case. 751 */ 752 sc = cpu_softc[mdcpu->mi.gd_cpuid]; 753 if (sc == NULL) { 754 acpi_cpu_c1(); 755 return; 756 } 757 758 /* Find the lowest state that has small enough latency. */ 759 cx_next_idx = 0; 760 for (i = sc->cpu_cx_lowest; i >= 0; i--) { 761 if (sc->cpu_cx_states[i].trans_lat * 3 <= sc->cpu_prev_sleep) { 762 cx_next_idx = i; 763 break; 764 } 765 } 766 767 /* 768 * Check for bus master activity. If there was activity, clear 769 * the bit and use the lowest non-C3 state. Note that the USB 770 * driver polling for new devices keeps this bit set all the 771 * time if USB is loaded. 772 */ 773 if ((cpu_quirks & CPU_QUIRK_NO_BM_CTRL) == 0) { 774 AcpiReadBitRegister(ACPI_BITREG_BUS_MASTER_STATUS, &bm_active); 775 if (bm_active != 0) { 776 AcpiWriteBitRegister(ACPI_BITREG_BUS_MASTER_STATUS, 1); 777 cx_next_idx = min(cx_next_idx, sc->cpu_non_c3); 778 } 779 } 780 781 /* Select the next state and update statistics. */ 782 cx_next = &sc->cpu_cx_states[cx_next_idx]; 783 sc->cpu_cx_stats[cx_next_idx]++; 784 KASSERT(cx_next->type != ACPI_STATE_C0, ("acpi_cpu_idle: C0 sleep")); 785 786 /* 787 * Execute HLT (or equivalent) and wait for an interrupt. We can't 788 * calculate the time spent in C1 since the place we wake up is an 789 * ISR. Assume we slept half of quantum and return. 790 */ 791 if (cx_next->type == ACPI_STATE_C1) { 792 sc->cpu_prev_sleep = (sc->cpu_prev_sleep * 3 + 500000 / hz) / 4; 793 acpi_cpu_c1(); 794 return; 795 } 796 797 /* 798 * For C3, disable bus master arbitration and enable bus master wake 799 * if BM control is available, otherwise flush the CPU cache. 800 */ 801 if (cx_next->type == ACPI_STATE_C3) { 802 if ((cpu_quirks & CPU_QUIRK_NO_BM_CTRL) == 0) { 803 AcpiWriteBitRegister(ACPI_BITREG_ARB_DISABLE, 1); 804 AcpiWriteBitRegister(ACPI_BITREG_BUS_MASTER_RLD, 1); 805 } else 806 ACPI_FLUSH_CPU_CACHE(); 807 } 808 809 /* 810 * Read from P_LVLx to enter C2(+), checking time spent asleep. 811 * Use the ACPI timer for measuring sleep time. Since we need to 812 * get the time very close to the CPU start/stop clock logic, this 813 * is the only reliable time source. 814 */ 815 AcpiRead(&start_time, &AcpiGbl_FADT.XPmTimerBlock); 816 CPU_GET_REG(cx_next->p_lvlx, 1); 817 818 /* 819 * Read the end time twice. Since it may take an arbitrary time 820 * to enter the idle state, the first read may be executed before 821 * the processor has stopped. Doing it again provides enough 822 * margin that we are certain to have a correct value. 823 */ 824 AcpiRead(&end_time, &AcpiGbl_FADT.XPmTimerBlock); 825 AcpiRead(&end_time, &AcpiGbl_FADT.XPmTimerBlock); 826 827 /* Enable bus master arbitration and disable bus master wakeup. */ 828 if (cx_next->type == ACPI_STATE_C3) { 829 if ((cpu_quirks & CPU_QUIRK_NO_BM_CTRL) == 0) { 830 AcpiWriteBitRegister(ACPI_BITREG_ARB_DISABLE, 0); 831 AcpiWriteBitRegister(ACPI_BITREG_BUS_MASTER_RLD, 0); 832 } 833 } 834 ACPI_ENABLE_IRQS(); 835 836 /* Find the actual time asleep in microseconds. */ 837 end_time = acpi_TimerDelta(end_time, start_time); 838 sc->cpu_prev_sleep = (sc->cpu_prev_sleep * 3 + PM_USEC(end_time)) / 4; 839 } 840 841 /* 842 * Re-evaluate the _CST object when we are notified that it changed. 843 * 844 * XXX Re-evaluation disabled until locking is done. 845 */ 846 static void 847 acpi_cpu_cst_notify(device_t dev) 848 { 849 struct acpi_cpu_softc *sc = device_get_softc(dev); 850 struct acpi_cpu_softc *isc; 851 int i; 852 853 /* Update the list of Cx states. */ 854 acpi_cpu_cx_cst(sc); 855 acpi_cpu_cx_list(sc); 856 857 /* Update the new lowest useable Cx state for all CPUs. */ 858 crit_enter(); 859 cpu_cx_count = 0; 860 for (i = 0; i < cpu_ndevices; i++) { 861 isc = device_get_softc(cpu_devices[i]); 862 if (isc->cpu_cx_count > cpu_cx_count) 863 cpu_cx_count = isc->cpu_cx_count; 864 } 865 crit_exit(); 866 } 867 868 static int 869 acpi_cpu_quirks(void) 870 { 871 device_t acpi_dev; 872 uint32_t val; 873 874 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 875 876 /* 877 * Bus mastering arbitration control is needed to keep caches coherent 878 * while sleeping in C3. If it's not present but a working flush cache 879 * instruction is present, flush the caches before entering C3 instead. 880 * Otherwise, just disable C3 completely. 881 */ 882 if (AcpiGbl_FADT.Pm2ControlBlock == 0 || 883 AcpiGbl_FADT.Pm2ControlLength == 0) { 884 if ((AcpiGbl_FADT.Flags & ACPI_FADT_WBINVD) && 885 (AcpiGbl_FADT.Flags & ACPI_FADT_WBINVD_FLUSH) == 0) { 886 cpu_quirks |= CPU_QUIRK_NO_BM_CTRL; 887 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 888 "acpi_cpu: no BM control, using flush cache method\n")); 889 } else { 890 cpu_quirks |= CPU_QUIRK_NO_C3; 891 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 892 "acpi_cpu: no BM control, C3 not available\n")); 893 } 894 } 895 896 /* 897 * If we are using generic Cx mode, C3 on multiple CPUs requires using 898 * the expensive flush cache instruction. 899 */ 900 if (cpu_cx_generic && ncpus > 1) { 901 cpu_quirks |= CPU_QUIRK_NO_BM_CTRL; 902 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 903 "acpi_cpu: SMP, using flush cache mode for C3\n")); 904 } 905 906 /* Look for various quirks of the PIIX4 part. */ 907 acpi_dev = pci_find_device(PCI_VENDOR_INTEL, PCI_DEVICE_82371AB_3); 908 if (acpi_dev != NULL) { 909 switch (pci_get_revid(acpi_dev)) { 910 /* 911 * Disable C3 support for all PIIX4 chipsets. Some of these parts 912 * do not report the BMIDE status to the BM status register and 913 * others have a livelock bug if Type-F DMA is enabled. Linux 914 * works around the BMIDE bug by reading the BM status directly 915 * but we take the simpler approach of disabling C3 for these 916 * parts. 917 * 918 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA 919 * Livelock") from the January 2002 PIIX4 specification update. 920 * Applies to all PIIX4 models. 921 * 922 * Also, make sure that all interrupts cause a "Stop Break" 923 * event to exit from C2 state. 924 * Also, BRLD_EN_BM (ACPI_BITREG_BUS_MASTER_RLD in ACPI-speak) 925 * should be set to zero, otherwise it causes C2 to short-sleep. 926 * PIIX4 doesn't properly support C3 and bus master activity 927 * need not break out of C2. 928 */ 929 case PCI_REVISION_A_STEP: 930 case PCI_REVISION_B_STEP: 931 case PCI_REVISION_4E: 932 case PCI_REVISION_4M: 933 cpu_quirks |= CPU_QUIRK_NO_C3; 934 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 935 "acpi_cpu: working around PIIX4 bug, disabling C3\n")); 936 937 val = pci_read_config(acpi_dev, PIIX4_DEVACTB_REG, 4); 938 if ((val & PIIX4_STOP_BREAK_MASK) != PIIX4_STOP_BREAK_MASK) { 939 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 940 "acpi_cpu: PIIX4: enabling IRQs to generate Stop Break\n")); 941 val |= PIIX4_STOP_BREAK_MASK; 942 pci_write_config(acpi_dev, PIIX4_DEVACTB_REG, val, 4); 943 } 944 AcpiReadBitRegister(ACPI_BITREG_BUS_MASTER_RLD, &val); 945 if (val) { 946 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 947 "acpi_cpu: PIIX4: reset BRLD_EN_BM\n")); 948 AcpiWriteBitRegister(ACPI_BITREG_BUS_MASTER_RLD, 0); 949 } 950 break; 951 default: 952 break; 953 } 954 } 955 956 return (0); 957 } 958 959 static int 960 acpi_cpu_usage_sysctl(SYSCTL_HANDLER_ARGS) 961 { 962 struct acpi_cpu_softc *sc; 963 struct sbuf sb; 964 char buf[128]; 965 int i; 966 uintmax_t fract, sum, whole; 967 968 sc = (struct acpi_cpu_softc *) arg1; 969 sum = 0; 970 for (i = 0; i < sc->cpu_cx_count; i++) 971 sum += sc->cpu_cx_stats[i]; 972 sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN); 973 for (i = 0; i < sc->cpu_cx_count; i++) { 974 if (sum > 0) { 975 whole = (uintmax_t)sc->cpu_cx_stats[i] * 100; 976 fract = (whole % sum) * 100; 977 sbuf_printf(&sb, "%u.%02u%% ", (u_int)(whole / sum), 978 (u_int)(fract / sum)); 979 } else 980 sbuf_printf(&sb, "0.00%% "); 981 } 982 sbuf_printf(&sb, "last %dus", sc->cpu_prev_sleep); 983 sbuf_trim(&sb); 984 sbuf_finish(&sb); 985 sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req); 986 sbuf_delete(&sb); 987 988 return (0); 989 } 990 991 static int 992 acpi_cpu_set_cx_lowest(struct acpi_cpu_softc *sc, int val) 993 { 994 int i, old_lowest, error = 0; 995 uint32_t old_type, type; 996 997 get_mplock(); 998 999 old_lowest = atomic_swap_int(&sc->cpu_cx_lowest, val); 1000 1001 old_type = sc->cpu_cx_states[old_lowest].type; 1002 type = sc->cpu_cx_states[val].type; 1003 if (old_type == ACPI_STATE_C3 && type != ACPI_STATE_C3) { 1004 KKASSERT(cpu_c3_ncpus > 0); 1005 if (atomic_fetchadd_int(&cpu_c3_ncpus, -1) == 1) { 1006 /* 1007 * All of the CPUs exit C3 state, use a better 1008 * one shot timer. 1009 */ 1010 error = cputimer_intr_select_caps(CPUTIMER_INTR_CAP_NONE); 1011 KKASSERT(!error); 1012 cputimer_intr_restart(); 1013 } 1014 } else if (type == ACPI_STATE_C3 && old_type != ACPI_STATE_C3) { 1015 if (atomic_fetchadd_int(&cpu_c3_ncpus, 1) == 0) { 1016 /* 1017 * When the first CPU enters C3 state, switch 1018 * to an one shot timer, which could handle 1019 * C3 state, i.e. the timer will not hang. 1020 */ 1021 error = cputimer_intr_select_caps(CPUTIMER_INTR_CAP_PS); 1022 if (!error) { 1023 cputimer_intr_restart(); 1024 } else { 1025 kprintf("no suitable intr cputimer found\n"); 1026 1027 /* Restore */ 1028 sc->cpu_cx_lowest = old_lowest; 1029 atomic_fetchadd_int(&cpu_c3_ncpus, -1); 1030 } 1031 } 1032 } 1033 1034 rel_mplock(); 1035 1036 if (error) 1037 return error; 1038 1039 /* If not disabling, cache the new lowest non-C3 state. */ 1040 sc->cpu_non_c3 = 0; 1041 for (i = sc->cpu_cx_lowest; i >= 0; i--) { 1042 if (sc->cpu_cx_states[i].type < ACPI_STATE_C3) { 1043 sc->cpu_non_c3 = i; 1044 break; 1045 } 1046 } 1047 1048 /* Reset the statistics counters. */ 1049 bzero(sc->cpu_cx_stats, sizeof(sc->cpu_cx_stats)); 1050 return (0); 1051 } 1052 1053 static int 1054 acpi_cpu_cx_lowest_sysctl(SYSCTL_HANDLER_ARGS) 1055 { 1056 struct acpi_cpu_softc *sc; 1057 char state[8]; 1058 int val, error; 1059 1060 sc = (struct acpi_cpu_softc *) arg1; 1061 ksnprintf(state, sizeof(state), "C%d", sc->cpu_cx_lowest + 1); 1062 error = sysctl_handle_string(oidp, state, sizeof(state), req); 1063 if (error != 0 || req->newptr == NULL) 1064 return (error); 1065 if (strlen(state) < 2 || toupper(state[0]) != 'C') 1066 return (EINVAL); 1067 val = (int) strtol(state + 1, NULL, 10) - 1; 1068 if (val < 0 || val > sc->cpu_cx_count - 1) 1069 return (EINVAL); 1070 1071 crit_enter(); 1072 error = acpi_cpu_set_cx_lowest(sc, val); 1073 crit_exit(); 1074 1075 return error; 1076 } 1077 1078 static int 1079 acpi_cpu_global_cx_lowest_sysctl(SYSCTL_HANDLER_ARGS) 1080 { 1081 struct acpi_cpu_softc *sc; 1082 char state[8]; 1083 int val, error, i; 1084 1085 ksnprintf(state, sizeof(state), "C%d", cpu_cx_lowest + 1); 1086 error = sysctl_handle_string(oidp, state, sizeof(state), req); 1087 if (error != 0 || req->newptr == NULL) 1088 return (error); 1089 if (strlen(state) < 2 || toupper(state[0]) != 'C') 1090 return (EINVAL); 1091 val = (int) strtol(state + 1, NULL, 10) - 1; 1092 if (val < 0 || val > cpu_cx_count - 1) 1093 return (EINVAL); 1094 cpu_cx_lowest = val; 1095 1096 /* Update the new lowest useable Cx state for all CPUs. */ 1097 crit_enter(); 1098 for (i = 0; i < cpu_ndevices; i++) { 1099 sc = device_get_softc(cpu_devices[i]); 1100 error = acpi_cpu_set_cx_lowest(sc, val); 1101 if (error) { 1102 KKASSERT(i == 0); 1103 break; 1104 } 1105 } 1106 crit_exit(); 1107 1108 return error; 1109 } 1110 1111 /* 1112 * Put the CPU in C1 in a machine-dependant way. 1113 * XXX: shouldn't be here! 1114 */ 1115 static void 1116 acpi_cpu_c1(void) 1117 { 1118 #ifdef __ia64__ 1119 ia64_call_pal_static(PAL_HALT_LIGHT, 0, 0, 0); 1120 #else 1121 splz(); 1122 if ((mycpu->gd_reqflags & RQF_IDLECHECK_WK_MASK) == 0) 1123 __asm __volatile("sti; hlt"); 1124 else 1125 __asm __volatile("sti; pause"); 1126 #endif /* !__ia64__ */ 1127 } 1128