1 /*- 2 * Copyright (c) 2000, 2001 Michael Smith 3 * Copyright (c) 2000 BSDi 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD: head/sys/dev/acpica/acpi_thermal.c 255077 2013-08-30 19:21:12Z dumbbell $ 28 */ 29 30 #include "opt_acpi.h" 31 #include <sys/param.h> 32 #include <sys/kernel.h> 33 #include <sys/bus.h> 34 #include <sys/kthread.h> 35 #include <sys/malloc.h> 36 #include <sys/module.h> 37 #include <sys/proc.h> 38 #include <sys/reboot.h> 39 #include <sys/sysctl.h> 40 #include <sys/unistd.h> 41 #include <sys/power.h> 42 #include <sys/sensors.h> 43 44 #include <sys/mplock2.h> 45 46 #include "acpi.h" 47 #include "accommon.h" 48 49 #include <dev/acpica/acpivar.h> 50 51 /* Hooks for the ACPICA debugging infrastructure */ 52 #define _COMPONENT ACPI_THERMAL 53 ACPI_MODULE_NAME("THERMAL") 54 55 #define TZ_ZEROC 2732 56 #define TZ_KELVTOC(x) (((x) - TZ_ZEROC) / 10), abs(((x) - TZ_ZEROC) % 10) 57 58 #define TZ_NOTIFY_TEMPERATURE 0x80 /* Temperature changed. */ 59 #define TZ_NOTIFY_LEVELS 0x81 /* Cooling levels changed. */ 60 #define TZ_NOTIFY_DEVICES 0x82 /* Device lists changed. */ 61 #define TZ_NOTIFY_CRITICAL 0xcc /* Fake notify that _CRT/_HOT reached. */ 62 63 /* Check for temperature changes every 10 seconds by default */ 64 #define TZ_POLLRATE 10 65 66 /* Make sure the reported temperature is valid for this number of polls. */ 67 #define TZ_VALIDCHECKS 3 68 69 /* Notify the user we will be shutting down in one more poll cycle. */ 70 #define TZ_NOTIFYCOUNT (TZ_VALIDCHECKS - 1) 71 72 /* ACPI spec defines this */ 73 #define TZ_NUMLEVELS 10 74 struct acpi_tz_zone { 75 int ac[TZ_NUMLEVELS]; 76 ACPI_BUFFER al[TZ_NUMLEVELS]; 77 int crt; 78 int hot; 79 ACPI_BUFFER psl; 80 int psv; 81 int tc1; 82 int tc2; 83 int tsp; 84 int tzp; 85 }; 86 87 struct acpi_tz_softc { 88 device_t tz_dev; 89 ACPI_HANDLE tz_handle; /*Thermal zone handle*/ 90 int tz_temperature; /*Current temperature*/ 91 int tz_active; /*Current active cooling*/ 92 #define TZ_ACTIVE_NONE -1 93 #define TZ_ACTIVE_UNKNOWN -2 94 int tz_requested; /*Minimum active cooling*/ 95 int tz_thflags; /*Current temp-related flags*/ 96 #define TZ_THFLAG_NONE 0 97 #define TZ_THFLAG_PSV (1<<0) 98 #define TZ_THFLAG_HOT (1<<2) 99 #define TZ_THFLAG_CRT (1<<3) 100 int tz_flags; 101 #define TZ_FLAG_NO_SCP (1<<0) /*No _SCP method*/ 102 #define TZ_FLAG_GETPROFILE (1<<1) /*Get power_profile in timeout*/ 103 #define TZ_FLAG_GETSETTINGS (1<<2) /*Get devs/setpoints*/ 104 struct timespec tz_cooling_started; 105 /*Current cooling starting time*/ 106 107 struct sysctl_ctx_list tz_sysctl_ctx; 108 struct sysctl_oid *tz_sysctl_tree; 109 eventhandler_tag tz_event; 110 111 struct acpi_tz_zone tz_zone; /*Thermal zone parameters*/ 112 time_t tz_error_time; /*Lookup error timestamp*/ 113 int tz_validchecks; 114 int tz_insane_tmp_notified; 115 116 /* passive cooling */ 117 struct thread *tz_cooling_proc; 118 int tz_cooling_proc_running; 119 int tz_cooling_enabled; 120 int tz_cooling_active; 121 int tz_cooling_updated; 122 int tz_cooling_saved_freq; 123 /* sensors(9) related */ 124 struct ksensordev sensordev; 125 struct ksensor sensor; 126 }; 127 128 /* silence errors after X seconds, try again after Y seconds */ 129 #define TZ_SILENCE_ERROR \ 130 ((acpi_tz_polling_rate <= 0 ? TZ_POLLRATE : acpi_tz_polling_rate) * 2 + 1) 131 #define TZ_RETRY_ERROR 7200 132 133 #define TZ_ACTIVE_LEVEL(act) ((act) >= 0 ? (act) : TZ_NUMLEVELS) 134 135 #define CPUFREQ_MAX_LEVELS 64 /* XXX cpufreq should export this */ 136 137 static int acpi_tz_probe(device_t dev); 138 static int acpi_tz_attach(device_t dev); 139 static int acpi_tz_establish(struct acpi_tz_softc *sc); 140 static void acpi_tz_monitor(void *Context); 141 static void acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg); 142 static void acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg); 143 static void acpi_tz_getparam(struct acpi_tz_softc *sc, char *node, 144 int *data); 145 static void acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what); 146 static int acpi_tz_polling_sysctl(SYSCTL_HANDLER_ARGS); 147 static int acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS); 148 static int acpi_tz_cooling_sysctl(SYSCTL_HANDLER_ARGS); 149 static int acpi_tz_temp_sysctl(SYSCTL_HANDLER_ARGS); 150 static int acpi_tz_passive_sysctl(SYSCTL_HANDLER_ARGS); 151 static void acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify, 152 void *context); 153 static void acpi_tz_signal(struct acpi_tz_softc *sc, int flags); 154 static void acpi_tz_timeout(struct acpi_tz_softc *sc, int flags); 155 static void acpi_tz_power_profile(void *arg); 156 static void acpi_tz_thread(void *arg); 157 static int acpi_tz_cooling_is_available(struct acpi_tz_softc *sc); 158 static int acpi_tz_cooling_thread_start(struct acpi_tz_softc *sc); 159 160 static device_method_t acpi_tz_methods[] = { 161 /* Device interface */ 162 DEVMETHOD(device_probe, acpi_tz_probe), 163 DEVMETHOD(device_attach, acpi_tz_attach), 164 165 DEVMETHOD_END 166 }; 167 168 static driver_t acpi_tz_driver = { 169 "acpi_tz", 170 acpi_tz_methods, 171 sizeof(struct acpi_tz_softc), 172 }; 173 174 static char *acpi_tz_tmp_name = "_TMP"; 175 176 static devclass_t acpi_tz_devclass; 177 DRIVER_MODULE(acpi_tz, acpi, acpi_tz_driver, acpi_tz_devclass, NULL, NULL); 178 MODULE_DEPEND(acpi_tz, acpi, 1, 1, 1); 179 180 static struct sysctl_ctx_list acpi_tz_sysctl_ctx; 181 static struct sysctl_oid *acpi_tz_sysctl_tree; 182 183 /* Minimum cooling run time */ 184 static int acpi_tz_min_runtime; 185 static int acpi_tz_polling_rate = TZ_POLLRATE; 186 static int acpi_tz_override; 187 188 /* Timezone polling thread */ 189 static struct thread *acpi_tz_td; 190 ACPI_LOCK_DECL(thermal, "ACPI thermal zone"); 191 192 static int acpi_tz_cooling_unit = -1; 193 194 static int 195 acpi_tz_probe(device_t dev) 196 { 197 int result; 198 199 if (acpi_get_type(dev) == ACPI_TYPE_THERMAL && !acpi_disabled("thermal")) { 200 device_set_desc(dev, "Thermal Zone"); 201 result = -10; 202 } else 203 result = ENXIO; 204 return (result); 205 } 206 207 static int 208 acpi_tz_attach(device_t dev) 209 { 210 struct acpi_tz_softc *sc; 211 struct acpi_softc *acpi_sc; 212 int error; 213 char oidname[8]; 214 215 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 216 if (device_get_unit(dev) == 0) 217 ACPI_LOCK_INIT(thermal, "acpitz"); 218 219 sc = device_get_softc(dev); 220 sc->tz_dev = dev; 221 sc->tz_handle = acpi_get_handle(dev); 222 sc->tz_requested = TZ_ACTIVE_NONE; 223 sc->tz_active = TZ_ACTIVE_UNKNOWN; 224 sc->tz_thflags = TZ_THFLAG_NONE; 225 sc->tz_cooling_proc = NULL; 226 sc->tz_cooling_proc_running = FALSE; 227 sc->tz_cooling_active = FALSE; 228 sc->tz_cooling_updated = FALSE; 229 sc->tz_cooling_enabled = FALSE; 230 231 /* 232 * Parse the current state of the thermal zone and build control 233 * structures. We don't need to worry about interference with the 234 * control thread since we haven't fully attached this device yet. 235 */ 236 if ((error = acpi_tz_establish(sc)) != 0) 237 return (error); 238 239 /* 240 * Register for any Notify events sent to this zone. 241 */ 242 AcpiInstallNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY, 243 acpi_tz_notify_handler, sc); 244 245 /* 246 * Create our sysctl nodes. 247 * 248 * XXX we need a mechanism for adding nodes under ACPI. 249 */ 250 if (device_get_unit(dev) == 0) { 251 acpi_sc = acpi_device_get_parent_softc(dev); 252 sysctl_ctx_init(&acpi_tz_sysctl_ctx); 253 acpi_tz_sysctl_tree = SYSCTL_ADD_NODE(&acpi_tz_sysctl_ctx, 254 SYSCTL_CHILDREN(acpi_sc->acpi_sysctl_tree), 255 OID_AUTO, "thermal", CTLFLAG_RD, 0, ""); 256 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx, 257 SYSCTL_CHILDREN(acpi_tz_sysctl_tree), 258 OID_AUTO, "min_runtime", CTLFLAG_RW, 259 &acpi_tz_min_runtime, 0, 260 "minimum cooling run time in sec"); 261 SYSCTL_ADD_PROC(&acpi_tz_sysctl_ctx, 262 SYSCTL_CHILDREN(acpi_tz_sysctl_tree), 263 OID_AUTO, "polling_rate", CTLTYPE_INT | CTLFLAG_RW, 264 &acpi_tz_polling_rate, 0, acpi_tz_polling_sysctl, 265 "I", "monitor polling interval in seconds"); 266 SYSCTL_ADD_INT(&acpi_tz_sysctl_ctx, 267 SYSCTL_CHILDREN(acpi_tz_sysctl_tree), OID_AUTO, 268 "user_override", CTLFLAG_RW, &acpi_tz_override, 0, 269 "allow override of thermal settings"); 270 } 271 sysctl_ctx_init(&sc->tz_sysctl_ctx); 272 ksprintf(oidname, "tz%d", device_get_unit(dev)); 273 sc->tz_sysctl_tree = SYSCTL_ADD_NODE(&sc->tz_sysctl_ctx, 274 SYSCTL_CHILDREN(acpi_tz_sysctl_tree), 275 OID_AUTO, oidname, CTLFLAG_RD, 0, ""); 276 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 277 OID_AUTO, "temperature", CTLTYPE_INT | CTLFLAG_RD, 278 &sc->tz_temperature, 0, sysctl_handle_int, 279 "IK", "current thermal zone temperature"); 280 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 281 OID_AUTO, "active", CTLTYPE_INT | CTLFLAG_RW, 282 sc, 0, acpi_tz_active_sysctl, "I", "cooling is active"); 283 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 284 OID_AUTO, "passive_cooling", CTLTYPE_INT | CTLFLAG_RW, 285 sc, 0, acpi_tz_cooling_sysctl, "I", 286 "enable passive (speed reduction) cooling"); 287 288 SYSCTL_ADD_INT(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 289 OID_AUTO, "thermal_flags", CTLFLAG_RD, 290 &sc->tz_thflags, 0, "thermal zone flags"); 291 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 292 OID_AUTO, "_PSV", CTLTYPE_INT | CTLFLAG_RW, 293 sc, offsetof(struct acpi_tz_softc, tz_zone.psv), 294 acpi_tz_temp_sysctl, "IK", "passive cooling temp setpoint"); 295 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 296 OID_AUTO, "_HOT", CTLTYPE_INT | CTLFLAG_RW, 297 sc, offsetof(struct acpi_tz_softc, tz_zone.hot), 298 acpi_tz_temp_sysctl, "IK", 299 "too hot temp setpoint (suspend now)"); 300 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 301 OID_AUTO, "_CRT", CTLTYPE_INT | CTLFLAG_RW, 302 sc, offsetof(struct acpi_tz_softc, tz_zone.crt), 303 acpi_tz_temp_sysctl, "IK", 304 "critical temp setpoint (shutdown now)"); 305 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 306 OID_AUTO, "_ACx", CTLTYPE_INT | CTLFLAG_RD, 307 &sc->tz_zone.ac, sizeof(sc->tz_zone.ac), 308 sysctl_handle_opaque, "IK", ""); 309 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 310 OID_AUTO, "_TC1", CTLTYPE_INT | CTLFLAG_RW, 311 sc, offsetof(struct acpi_tz_softc, tz_zone.tc1), 312 acpi_tz_passive_sysctl, "I", 313 "thermal constant 1 for passive cooling"); 314 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 315 OID_AUTO, "_TC2", CTLTYPE_INT | CTLFLAG_RW, 316 sc, offsetof(struct acpi_tz_softc, tz_zone.tc2), 317 acpi_tz_passive_sysctl, "I", 318 "thermal constant 2 for passive cooling"); 319 SYSCTL_ADD_PROC(&sc->tz_sysctl_ctx, SYSCTL_CHILDREN(sc->tz_sysctl_tree), 320 OID_AUTO, "_TSP", CTLTYPE_INT | CTLFLAG_RW, 321 sc, offsetof(struct acpi_tz_softc, tz_zone.tsp), 322 acpi_tz_passive_sysctl, "I", 323 "thermal sampling period for passive cooling"); 324 325 /* 326 * Create thread to service all of the thermal zones. Register 327 * our power profile event handler. 328 */ 329 sc->tz_event = EVENTHANDLER_REGISTER(power_profile_change, 330 acpi_tz_power_profile, sc, 0); 331 if (acpi_tz_td == NULL) { 332 error = kthread_create(acpi_tz_thread, NULL, &acpi_tz_td, 333 "acpi_thermal"); 334 if (error != 0) { 335 device_printf(sc->tz_dev, "could not create thread - %d", error); 336 goto out; 337 } 338 } 339 340 /* 341 * Create a thread to handle passive cooling for 1st zone which 342 * has _PSV, _TSP, _TC1 and _TC2. Users can enable it for other 343 * zones manually for now. 344 * 345 * XXX We enable only one zone to avoid multiple zones conflict 346 * with each other since cpufreq currently sets all CPUs to the 347 * given frequency whereas it's possible for different thermal 348 * zones to specify independent settings for multiple CPUs. 349 */ 350 if (acpi_tz_cooling_unit < 0 && acpi_tz_cooling_is_available(sc)) 351 sc->tz_cooling_enabled = TRUE; 352 if (sc->tz_cooling_enabled) { 353 error = acpi_tz_cooling_thread_start(sc); 354 if (error != 0) { 355 sc->tz_cooling_enabled = FALSE; 356 goto out; 357 } 358 acpi_tz_cooling_unit = device_get_unit(dev); 359 } 360 361 /* 362 * Flag the event handler for a manual invocation by our timeout. 363 * We defer it like this so that the rest of the subsystem has time 364 * to come up. Don't bother evaluating/printing the temperature at 365 * this point; on many systems it'll be bogus until the EC is running. 366 */ 367 sc->tz_flags |= TZ_FLAG_GETPROFILE; 368 369 /* Attach sensors(9). */ 370 strlcpy(sc->sensordev.xname, device_get_nameunit(sc->tz_dev), 371 sizeof(sc->sensordev.xname)); 372 373 sc->sensor.type = SENSOR_TEMP; 374 sensor_attach(&sc->sensordev, &sc->sensor); 375 376 sensordev_install(&sc->sensordev); 377 378 out: 379 if (error != 0) { 380 EVENTHANDLER_DEREGISTER(power_profile_change, sc->tz_event); 381 AcpiRemoveNotifyHandler(sc->tz_handle, ACPI_DEVICE_NOTIFY, 382 acpi_tz_notify_handler); 383 sysctl_ctx_free(&sc->tz_sysctl_ctx); 384 } 385 return_VALUE (error); 386 } 387 388 /* 389 * Parse the current state of this thermal zone and set up to use it. 390 * 391 * Note that we may have previous state, which will have to be discarded. 392 */ 393 static int 394 acpi_tz_establish(struct acpi_tz_softc *sc) 395 { 396 ACPI_OBJECT *obj; 397 int i; 398 char nbuf[8]; 399 400 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 401 402 /* Erase any existing state. */ 403 for (i = 0; i < TZ_NUMLEVELS; i++) 404 if (sc->tz_zone.al[i].Pointer != NULL) 405 AcpiOsFree(sc->tz_zone.al[i].Pointer); 406 if (sc->tz_zone.psl.Pointer != NULL) 407 AcpiOsFree(sc->tz_zone.psl.Pointer); 408 409 /* 410 * XXX: We initialize only ACPI_BUFFER to avoid race condition 411 * with passive cooling thread which refers psv, tc1, tc2 and tsp. 412 */ 413 bzero(sc->tz_zone.ac, sizeof(sc->tz_zone.ac)); 414 bzero(sc->tz_zone.al, sizeof(sc->tz_zone.al)); 415 bzero(&sc->tz_zone.psl, sizeof(sc->tz_zone.psl)); 416 417 /* Evaluate thermal zone parameters. */ 418 for (i = 0; i < TZ_NUMLEVELS; i++) { 419 ksprintf(nbuf, "_AC%d", i); 420 acpi_tz_getparam(sc, nbuf, &sc->tz_zone.ac[i]); 421 ksprintf(nbuf, "_AL%d", i); 422 sc->tz_zone.al[i].Length = ACPI_ALLOCATE_BUFFER; 423 sc->tz_zone.al[i].Pointer = NULL; 424 AcpiEvaluateObject(sc->tz_handle, nbuf, NULL, &sc->tz_zone.al[i]); 425 obj = (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer; 426 if (obj != NULL) { 427 /* Should be a package containing a list of power objects */ 428 if (obj->Type != ACPI_TYPE_PACKAGE) { 429 device_printf(sc->tz_dev, "%s has unknown type %d, rejecting\n", 430 nbuf, obj->Type); 431 return_VALUE (ENXIO); 432 } 433 } 434 } 435 acpi_tz_getparam(sc, "_CRT", &sc->tz_zone.crt); 436 acpi_tz_getparam(sc, "_HOT", &sc->tz_zone.hot); 437 sc->tz_zone.psl.Length = ACPI_ALLOCATE_BUFFER; 438 sc->tz_zone.psl.Pointer = NULL; 439 AcpiEvaluateObject(sc->tz_handle, "_PSL", NULL, &sc->tz_zone.psl); 440 acpi_tz_getparam(sc, "_PSV", &sc->tz_zone.psv); 441 acpi_tz_getparam(sc, "_TC1", &sc->tz_zone.tc1); 442 acpi_tz_getparam(sc, "_TC2", &sc->tz_zone.tc2); 443 acpi_tz_getparam(sc, "_TSP", &sc->tz_zone.tsp); 444 acpi_tz_getparam(sc, "_TZP", &sc->tz_zone.tzp); 445 446 /* 447 * Sanity-check the values we've been given. 448 * 449 * XXX what do we do about systems that give us the same value for 450 * more than one of these setpoints? 451 */ 452 acpi_tz_sanity(sc, &sc->tz_zone.crt, "_CRT"); 453 acpi_tz_sanity(sc, &sc->tz_zone.hot, "_HOT"); 454 acpi_tz_sanity(sc, &sc->tz_zone.psv, "_PSV"); 455 for (i = 0; i < TZ_NUMLEVELS; i++) 456 acpi_tz_sanity(sc, &sc->tz_zone.ac[i], "_ACx"); 457 458 return_VALUE (0); 459 } 460 461 static char *aclevel_string[] = { 462 "NONE", "_AC0", "_AC1", "_AC2", "_AC3", "_AC4", 463 "_AC5", "_AC6", "_AC7", "_AC8", "_AC9" 464 }; 465 466 static __inline const char * 467 acpi_tz_aclevel_string(int active) 468 { 469 if (active < -1 || active >= TZ_NUMLEVELS) 470 return (aclevel_string[0]); 471 472 return (aclevel_string[active + 1]); 473 } 474 475 /* 476 * Get the current temperature. 477 */ 478 static int 479 acpi_tz_get_temperature(struct acpi_tz_softc *sc) 480 { 481 int temp; 482 ACPI_STATUS status; 483 484 ACPI_FUNCTION_NAME ("acpi_tz_get_temperature"); 485 486 /* 487 * Silence lookup errors after 10 seconds, then retry every two hours. 488 */ 489 if (sc->tz_error_time && 490 time_uptime - sc->tz_error_time > TZ_SILENCE_ERROR) { 491 if (time_uptime - sc->tz_error_time < TZ_RETRY_ERROR) 492 return (FALSE); 493 sc->tz_error_time = time_uptime - TZ_SILENCE_ERROR; 494 } 495 496 /* Evaluate the thermal zone's _TMP method. */ 497 status = acpi_GetInteger(sc->tz_handle, acpi_tz_tmp_name, &temp); 498 if (ACPI_FAILURE(status)) { 499 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev), 500 "error fetching current temperature -- %s\n", 501 AcpiFormatException(status)); 502 if (sc->tz_error_time == 0) 503 sc->tz_error_time = time_uptime; 504 return (FALSE); 505 } 506 507 /* Check it for validity. */ 508 acpi_tz_sanity(sc, &temp, acpi_tz_tmp_name); 509 if (temp == -1) { 510 if (sc->tz_error_time == 0) 511 sc->tz_error_time = time_uptime; 512 return (FALSE); 513 } 514 515 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "got %d.%dC\n", TZ_KELVTOC(temp))); 516 sc->tz_temperature = temp; 517 sc->tz_error_time = 0; 518 /* Update sensor */ 519 if(sc->tz_temperature == -1) 520 sc->sensor.flags &= ~SENSOR_FINVALID; 521 sc->sensor.value = sc->tz_temperature * 100000 - 50000; 522 return (TRUE); 523 } 524 525 /* 526 * Evaluate the condition of a thermal zone, take appropriate actions. 527 */ 528 static void 529 acpi_tz_monitor(void *Context) 530 { 531 struct acpi_tz_softc *sc; 532 struct timespec curtime; 533 int temp; 534 int i; 535 int newactive, newflags; 536 537 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 538 539 sc = (struct acpi_tz_softc *)Context; 540 541 /* Get the current temperature. */ 542 if (!acpi_tz_get_temperature(sc)) { 543 /* XXX disable zone? go to max cooling? */ 544 return_VOID; 545 } 546 temp = sc->tz_temperature; 547 548 /* 549 * Work out what we ought to be doing right now. 550 * 551 * Note that the _ACx levels sort from hot to cold. 552 */ 553 newactive = TZ_ACTIVE_NONE; 554 for (i = TZ_NUMLEVELS - 1; i >= 0; i--) { 555 if (sc->tz_zone.ac[i] != -1 && temp >= sc->tz_zone.ac[i]) 556 newactive = i; 557 } 558 559 /* 560 * We are going to get _ACx level down (colder side), but give a guaranteed 561 * minimum cooling run time if requested. 562 */ 563 if (acpi_tz_min_runtime > 0 && sc->tz_active != TZ_ACTIVE_NONE && 564 sc->tz_active != TZ_ACTIVE_UNKNOWN && 565 (newactive == TZ_ACTIVE_NONE || newactive > sc->tz_active)) { 566 567 getnanotime(&curtime); 568 timespecsub(&curtime, &sc->tz_cooling_started); 569 if (curtime.tv_sec < acpi_tz_min_runtime) 570 newactive = sc->tz_active; 571 } 572 573 /* Handle user override of active mode */ 574 if (sc->tz_requested != TZ_ACTIVE_NONE && (newactive == TZ_ACTIVE_NONE 575 || sc->tz_requested < newactive)) 576 newactive = sc->tz_requested; 577 578 /* update temperature-related flags */ 579 newflags = TZ_THFLAG_NONE; 580 if (sc->tz_zone.psv != -1 && temp >= sc->tz_zone.psv) 581 newflags |= TZ_THFLAG_PSV; 582 if (sc->tz_zone.hot != -1 && temp >= sc->tz_zone.hot) 583 newflags |= TZ_THFLAG_HOT; 584 if (sc->tz_zone.crt != -1 && temp >= sc->tz_zone.crt) 585 newflags |= TZ_THFLAG_CRT; 586 587 /* If the active cooling state has changed, we have to switch things. */ 588 if (sc->tz_active == TZ_ACTIVE_UNKNOWN) { 589 /* 590 * We don't know which cooling device is on or off, 591 * so stop them all, because we now know which 592 * should be on (if any). 593 */ 594 for (i = 0; i < TZ_NUMLEVELS; i++) { 595 if (sc->tz_zone.al[i].Pointer != NULL) { 596 acpi_ForeachPackageObject( 597 (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer, 598 acpi_tz_switch_cooler_off, sc); 599 } 600 } 601 /* now we know that all devices are off */ 602 sc->tz_active = TZ_ACTIVE_NONE; 603 } 604 605 if (newactive != sc->tz_active) { 606 /* Turn off unneeded cooling devices that are on, if any are */ 607 for (i = TZ_ACTIVE_LEVEL(sc->tz_active); 608 i < TZ_ACTIVE_LEVEL(newactive); i++) { 609 acpi_ForeachPackageObject( 610 (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer, 611 acpi_tz_switch_cooler_off, sc); 612 } 613 /* Turn on cooling devices that are required, if any are */ 614 for (i = TZ_ACTIVE_LEVEL(sc->tz_active) - 1; 615 i >= TZ_ACTIVE_LEVEL(newactive); i--) { 616 acpi_ForeachPackageObject( 617 (ACPI_OBJECT *)sc->tz_zone.al[i].Pointer, 618 acpi_tz_switch_cooler_on, sc); 619 } 620 621 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev), 622 "switched from %s to %s: %d.%dC\n", 623 acpi_tz_aclevel_string(sc->tz_active), 624 acpi_tz_aclevel_string(newactive), TZ_KELVTOC(temp)); 625 sc->tz_active = newactive; 626 getnanotime(&sc->tz_cooling_started); 627 } 628 629 /* XXX (de)activate any passive cooling that may be required. */ 630 631 /* 632 * If the temperature is at _HOT or _CRT, increment our event count. 633 * If it has occurred enough times, shutdown the system. This is 634 * needed because some systems will report an invalid high temperature 635 * for one poll cycle. It is suspected this is due to the embedded 636 * controller timing out. A typical value is 138C for one cycle on 637 * a system that is otherwise 65C. 638 * 639 * If we're almost at that threshold, notify the user through devd(8). 640 */ 641 if ((newflags & (TZ_THFLAG_HOT | TZ_THFLAG_CRT)) != 0) { 642 sc->tz_validchecks++; 643 if (sc->tz_validchecks == TZ_VALIDCHECKS) { 644 device_printf(sc->tz_dev, 645 "WARNING - current temperature (%d.%dC) exceeds safe limits\n", 646 TZ_KELVTOC(sc->tz_temperature)); 647 shutdown_nice(RB_POWEROFF); 648 } else if (sc->tz_validchecks == TZ_NOTIFYCOUNT) 649 acpi_UserNotify("Thermal", sc->tz_handle, TZ_NOTIFY_CRITICAL); 650 } else { 651 sc->tz_validchecks = 0; 652 } 653 sc->tz_thflags = newflags; 654 655 return_VOID; 656 } 657 658 /* 659 * Given an object, verify that it's a reference to a device of some sort, 660 * and try to switch it off. 661 */ 662 static void 663 acpi_tz_switch_cooler_off(ACPI_OBJECT *obj, void *arg) 664 { 665 ACPI_HANDLE cooler; 666 667 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 668 669 cooler = acpi_GetReference(NULL, obj); 670 if (cooler == NULL) { 671 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "can't get handle\n")); 672 return_VOID; 673 } 674 675 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s off\n", 676 acpi_name(cooler))); 677 acpi_pwr_switch_consumer(cooler, ACPI_STATE_D3); 678 679 return_VOID; 680 } 681 682 /* 683 * Given an object, verify that it's a reference to a device of some sort, 684 * and try to switch it on. 685 * 686 * XXX replication of off/on function code is bad. 687 */ 688 static void 689 acpi_tz_switch_cooler_on(ACPI_OBJECT *obj, void *arg) 690 { 691 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)arg; 692 ACPI_HANDLE cooler; 693 ACPI_STATUS status; 694 695 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 696 697 cooler = acpi_GetReference(NULL, obj); 698 if (cooler == NULL) { 699 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "can't get handle\n")); 700 return_VOID; 701 } 702 703 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "called to turn %s on\n", 704 acpi_name(cooler))); 705 status = acpi_pwr_switch_consumer(cooler, ACPI_STATE_D0); 706 if (ACPI_FAILURE(status)) { 707 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev), 708 "failed to activate %s - %s\n", acpi_name(cooler), 709 AcpiFormatException(status)); 710 } 711 712 return_VOID; 713 } 714 715 /* 716 * Read/debug-print a parameter, default it to -1. 717 */ 718 static void 719 acpi_tz_getparam(struct acpi_tz_softc *sc, char *node, int *data) 720 { 721 722 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 723 724 if (ACPI_FAILURE(acpi_GetInteger(sc->tz_handle, node, data))) { 725 *data = -1; 726 } else { 727 ACPI_DEBUG_PRINT((ACPI_DB_VALUES, "%s.%s = %d\n", 728 acpi_name(sc->tz_handle), node, *data)); 729 } 730 731 return_VOID; 732 } 733 734 /* 735 * Handle sysctl for reading and changing the termal-zone polling rate. 736 */ 737 static int 738 acpi_tz_polling_sysctl(SYSCTL_HANDLER_ARGS) 739 { 740 int val, error; 741 742 val = acpi_tz_polling_rate; 743 error = sysctl_handle_int(oidp, &val, 0, req); 744 745 /* Error or no new value */ 746 if (error != 0 || req->newptr == NULL) 747 return (error); 748 if (val < 0 || val > 3600) 749 return (EINVAL); 750 751 acpi_tz_polling_rate = val; 752 wakeup(&acpi_tz_td); 753 return (error); 754 } 755 756 /* 757 * Sanity-check a temperature value. Assume that setpoints 758 * should be between 0C and 200C. 759 */ 760 static void 761 acpi_tz_sanity(struct acpi_tz_softc *sc, int *val, char *what) 762 { 763 if (*val != -1 && (*val < TZ_ZEROC || *val > TZ_ZEROC + 2000)) { 764 /* 765 * If the value we are checking is _TMP, warn the user only 766 * once. This avoids spamming messages if, for instance, the 767 * sensor is broken and always returns an invalid temperature. 768 * 769 * This is only done for _TMP; other values always emit a 770 * warning. 771 */ 772 if (what != acpi_tz_tmp_name || !sc->tz_insane_tmp_notified) { 773 device_printf(sc->tz_dev, "%s value is absurd, ignored (%d.%dC)\n", 774 what, TZ_KELVTOC(*val)); 775 776 /* Don't warn the user again if the read value doesn't improve. */ 777 if (what == acpi_tz_tmp_name) 778 sc->tz_insane_tmp_notified = 1; 779 } 780 *val = -1; 781 return; 782 } 783 784 /* This value is correct. Warn if it's incorrect again. */ 785 if (what == acpi_tz_tmp_name) 786 sc->tz_insane_tmp_notified = 0; 787 } 788 789 /* 790 * Respond to a sysctl on the active state node. 791 */ 792 static int 793 acpi_tz_active_sysctl(SYSCTL_HANDLER_ARGS) 794 { 795 struct acpi_tz_softc *sc; 796 int active; 797 int error; 798 799 sc = (struct acpi_tz_softc *)oidp->oid_arg1; 800 active = sc->tz_active; 801 error = sysctl_handle_int(oidp, &active, 0, req); 802 803 /* Error or no new value */ 804 if (error != 0 || req->newptr == NULL) 805 return (error); 806 if (active < -1 || active >= TZ_NUMLEVELS) 807 return (EINVAL); 808 809 /* Set new preferred level and re-switch */ 810 sc->tz_requested = active; 811 acpi_tz_signal(sc, 0); 812 return (0); 813 } 814 815 static int 816 acpi_tz_cooling_sysctl(SYSCTL_HANDLER_ARGS) 817 { 818 struct acpi_tz_softc *sc; 819 int enabled, error; 820 821 sc = (struct acpi_tz_softc *)oidp->oid_arg1; 822 enabled = sc->tz_cooling_enabled; 823 error = sysctl_handle_int(oidp, &enabled, 0, req); 824 825 /* Error or no new value */ 826 if (error != 0 || req->newptr == NULL) 827 return (error); 828 if (enabled != TRUE && enabled != FALSE) 829 return (EINVAL); 830 831 if (enabled) { 832 if (acpi_tz_cooling_is_available(sc)) 833 error = acpi_tz_cooling_thread_start(sc); 834 else 835 error = ENODEV; 836 if (error) 837 enabled = FALSE; 838 } 839 sc->tz_cooling_enabled = enabled; 840 return (error); 841 } 842 843 static int 844 acpi_tz_temp_sysctl(SYSCTL_HANDLER_ARGS) 845 { 846 struct acpi_tz_softc *sc; 847 int temp, *temp_ptr; 848 int error; 849 850 sc = oidp->oid_arg1; 851 temp_ptr = (int *)((uintptr_t)sc + oidp->oid_arg2); 852 temp = *temp_ptr; 853 error = sysctl_handle_int(oidp, &temp, 0, req); 854 855 /* Error or no new value */ 856 if (error != 0 || req->newptr == NULL) 857 return (error); 858 859 /* Only allow changing settings if override is set. */ 860 if (!acpi_tz_override) 861 return (EPERM); 862 863 /* Check user-supplied value for sanity. */ 864 acpi_tz_sanity(sc, &temp, "user-supplied temp"); 865 if (temp == -1) 866 return (EINVAL); 867 868 *temp_ptr = temp; 869 return (0); 870 } 871 872 static int 873 acpi_tz_passive_sysctl(SYSCTL_HANDLER_ARGS) 874 { 875 struct acpi_tz_softc *sc; 876 int val, *val_ptr; 877 int error; 878 879 sc = oidp->oid_arg1; 880 val_ptr = (int *)((uintptr_t)sc + oidp->oid_arg2); 881 val = *val_ptr; 882 error = sysctl_handle_int(oidp, &val, 0, req); 883 884 /* Error or no new value */ 885 if (error != 0 || req->newptr == NULL) 886 return (error); 887 888 /* Only allow changing settings if override is set. */ 889 if (!acpi_tz_override) 890 return (EPERM); 891 892 *val_ptr = val; 893 return (0); 894 } 895 896 static void 897 acpi_tz_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context) 898 { 899 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)context; 900 901 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 902 903 switch (notify) { 904 case TZ_NOTIFY_TEMPERATURE: 905 /* Temperature change occurred */ 906 acpi_tz_signal(sc, 0); 907 break; 908 case TZ_NOTIFY_DEVICES: 909 case TZ_NOTIFY_LEVELS: 910 /* Zone devices/setpoints changed */ 911 acpi_tz_signal(sc, TZ_FLAG_GETSETTINGS); 912 break; 913 default: 914 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev), 915 "unknown Notify event 0x%x\n", notify); 916 break; 917 } 918 919 acpi_UserNotify("Thermal", h, notify); 920 921 return_VOID; 922 } 923 924 static void 925 acpi_tz_signal(struct acpi_tz_softc *sc, int flags) 926 { 927 ACPI_LOCK(thermal); 928 sc->tz_flags |= flags; 929 ACPI_UNLOCK(thermal); 930 wakeup(&acpi_tz_td); 931 } 932 933 /* 934 * Notifies can be generated asynchronously but have also been seen to be 935 * triggered by other thermal methods. One system generates a notify of 936 * 0x81 when the fan is turned on or off. Another generates it when _SCP 937 * is called. To handle these situations, we check the zone via 938 * acpi_tz_monitor() before evaluating changes to setpoints or the cooling 939 * policy. 940 */ 941 static void 942 acpi_tz_timeout(struct acpi_tz_softc *sc, int flags) 943 { 944 945 /* Check the current temperature and take action based on it */ 946 acpi_tz_monitor(sc); 947 948 /* If requested, get the power profile settings. */ 949 if (flags & TZ_FLAG_GETPROFILE) 950 acpi_tz_power_profile(sc); 951 952 /* 953 * If requested, check for new devices/setpoints. After finding them, 954 * check if we need to switch fans based on the new values. 955 */ 956 if (flags & TZ_FLAG_GETSETTINGS) { 957 acpi_tz_establish(sc); 958 acpi_tz_monitor(sc); 959 } 960 961 /* XXX passive cooling actions? */ 962 } 963 964 /* 965 * System power profile may have changed; fetch and notify the 966 * thermal zone accordingly. 967 * 968 * Since this can be called from an arbitrary eventhandler, it needs 969 * to get the ACPI lock itself. 970 */ 971 static void 972 acpi_tz_power_profile(void *arg) 973 { 974 ACPI_STATUS status; 975 struct acpi_tz_softc *sc = (struct acpi_tz_softc *)arg; 976 int state; 977 978 state = power_profile_get_state(); 979 if (state != POWER_PROFILE_PERFORMANCE && state != POWER_PROFILE_ECONOMY) 980 return; 981 982 /* check that we haven't decided there's no _SCP method */ 983 if ((sc->tz_flags & TZ_FLAG_NO_SCP) == 0) { 984 985 /* Call _SCP to set the new profile */ 986 status = acpi_SetInteger(sc->tz_handle, "_SCP", 987 (state == POWER_PROFILE_PERFORMANCE) ? 0 : 1); 988 if (ACPI_FAILURE(status)) { 989 if (status != AE_NOT_FOUND) 990 ACPI_VPRINT(sc->tz_dev, 991 acpi_device_get_parent_softc(sc->tz_dev), 992 "can't evaluate %s._SCP - %s\n", 993 acpi_name(sc->tz_handle), 994 AcpiFormatException(status)); 995 sc->tz_flags |= TZ_FLAG_NO_SCP; 996 } else { 997 /* We have to re-evaluate the entire zone now */ 998 acpi_tz_signal(sc, TZ_FLAG_GETSETTINGS); 999 } 1000 } 1001 } 1002 1003 /* 1004 * Thermal zone monitor thread. 1005 */ 1006 static void 1007 acpi_tz_thread(void *arg) 1008 { 1009 device_t *devs; 1010 int devcount, i; 1011 int flags; 1012 struct acpi_tz_softc **sc; 1013 1014 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1015 1016 devs = NULL; 1017 devcount = 0; 1018 sc = NULL; 1019 get_mplock(); 1020 1021 for (;;) { 1022 /* If the number of devices has changed, re-evaluate. */ 1023 if (devclass_get_count(acpi_tz_devclass) != devcount) { 1024 if (devs != NULL) { 1025 kfree(devs, M_TEMP); 1026 kfree(sc, M_TEMP); 1027 } 1028 devclass_get_devices(acpi_tz_devclass, &devs, &devcount); 1029 sc = kmalloc(sizeof(struct acpi_tz_softc *) * devcount, M_TEMP, 1030 M_WAITOK | M_ZERO); 1031 for (i = 0; i < devcount; i++) 1032 sc[i] = device_get_softc(devs[i]); 1033 } 1034 1035 /* Check for temperature events and act on them. */ 1036 for (i = 0; i < devcount; i++) { 1037 ACPI_LOCK(thermal); 1038 flags = sc[i]->tz_flags; 1039 sc[i]->tz_flags &= TZ_FLAG_NO_SCP; 1040 ACPI_UNLOCK(thermal); 1041 acpi_tz_timeout(sc[i], flags); 1042 } 1043 1044 /* If more work to do, don't go to sleep yet. */ 1045 ACPI_LOCK(thermal); 1046 for (i = 0; i < devcount; i++) { 1047 if (sc[i]->tz_flags & ~TZ_FLAG_NO_SCP) 1048 break; 1049 } 1050 1051 /* 1052 * Interlocked sleep until signaled or we timeout. 1053 */ 1054 if (i == devcount) { 1055 tsleep_interlock(&acpi_tz_td, 0); 1056 ACPI_UNLOCK(thermal); 1057 tsleep(&acpi_tz_td, 0, "tzpoll", 1058 (acpi_tz_polling_rate <= 0 ? 0 : hz * acpi_tz_polling_rate)); 1059 } else { 1060 ACPI_UNLOCK(thermal); 1061 } 1062 } 1063 rel_mplock(); 1064 } 1065 1066 #ifdef __FreeBSD__ 1067 static int 1068 acpi_tz_cpufreq_restore(struct acpi_tz_softc *sc) 1069 { 1070 device_t dev; 1071 int error; 1072 1073 if (!sc->tz_cooling_updated) 1074 return (0); 1075 if ((dev = devclass_get_device(devclass_find("cpufreq"), 0)) == NULL) 1076 return (ENXIO); 1077 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev), 1078 "temperature %d.%dC: resuming previous clock speed (%d MHz)\n", 1079 TZ_KELVTOC(sc->tz_temperature), sc->tz_cooling_saved_freq); 1080 error = CPUFREQ_SET(dev, NULL, CPUFREQ_PRIO_KERN); 1081 if (error == 0) 1082 sc->tz_cooling_updated = FALSE; 1083 return (error); 1084 } 1085 1086 static int 1087 acpi_tz_cpufreq_update(struct acpi_tz_softc *sc, int req) 1088 { 1089 device_t dev; 1090 struct cf_level *levels; 1091 int num_levels, error, freq, desired_freq, perf, i; 1092 1093 levels = kmalloc(CPUFREQ_MAX_LEVELS * sizeof(*levels), M_TEMP, M_NOWAIT); 1094 if (levels == NULL) 1095 return (ENOMEM); 1096 1097 /* 1098 * Find the main device, cpufreq0. We don't yet support independent 1099 * CPU frequency control on SMP. 1100 */ 1101 if ((dev = devclass_get_device(devclass_find("cpufreq"), 0)) == NULL) { 1102 error = ENXIO; 1103 goto out; 1104 } 1105 1106 /* Get the current frequency. */ 1107 error = CPUFREQ_GET(dev, &levels[0]); 1108 if (error) 1109 goto out; 1110 freq = levels[0].total_set.freq; 1111 1112 /* Get the current available frequency levels. */ 1113 num_levels = CPUFREQ_MAX_LEVELS; 1114 error = CPUFREQ_LEVELS(dev, levels, &num_levels); 1115 if (error) { 1116 if (error == E2BIG) 1117 printf("cpufreq: need to increase CPUFREQ_MAX_LEVELS\n"); 1118 goto out; 1119 } 1120 1121 /* Calculate the desired frequency as a percent of the max frequency. */ 1122 perf = 100 * freq / levels[0].total_set.freq - req; 1123 if (perf < 0) 1124 perf = 0; 1125 else if (perf > 100) 1126 perf = 100; 1127 desired_freq = levels[0].total_set.freq * perf / 100; 1128 1129 if (desired_freq < freq) { 1130 /* Find the closest available frequency, rounding down. */ 1131 for (i = 0; i < num_levels; i++) 1132 if (levels[i].total_set.freq <= desired_freq) 1133 break; 1134 1135 /* If we didn't find a relevant setting, use the lowest. */ 1136 if (i == num_levels) 1137 i--; 1138 } else { 1139 /* If we didn't decrease frequency yet, don't increase it. */ 1140 if (!sc->tz_cooling_updated) { 1141 sc->tz_cooling_active = FALSE; 1142 goto out; 1143 } 1144 1145 /* Use saved cpu frequency as maximum value. */ 1146 if (desired_freq > sc->tz_cooling_saved_freq) 1147 desired_freq = sc->tz_cooling_saved_freq; 1148 1149 /* Find the closest available frequency, rounding up. */ 1150 for (i = num_levels - 1; i >= 0; i--) 1151 if (levels[i].total_set.freq >= desired_freq) 1152 break; 1153 1154 /* If we didn't find a relevant setting, use the highest. */ 1155 if (i == -1) 1156 i++; 1157 1158 /* If we're going to the highest frequency, restore the old setting. */ 1159 if (i == 0 || desired_freq == sc->tz_cooling_saved_freq) { 1160 error = acpi_tz_cpufreq_restore(sc); 1161 if (error == 0) 1162 sc->tz_cooling_active = FALSE; 1163 goto out; 1164 } 1165 } 1166 1167 /* If we are going to a new frequency, activate it. */ 1168 if (levels[i].total_set.freq != freq) { 1169 ACPI_VPRINT(sc->tz_dev, acpi_device_get_parent_softc(sc->tz_dev), 1170 "temperature %d.%dC: %screasing clock speed " 1171 "from %d MHz to %d MHz\n", 1172 TZ_KELVTOC(sc->tz_temperature), 1173 (freq > levels[i].total_set.freq) ? "de" : "in", 1174 freq, levels[i].total_set.freq); 1175 error = CPUFREQ_SET(dev, &levels[i], CPUFREQ_PRIO_KERN); 1176 if (error == 0 && !sc->tz_cooling_updated) { 1177 sc->tz_cooling_saved_freq = freq; 1178 sc->tz_cooling_updated = TRUE; 1179 } 1180 } 1181 1182 out: 1183 if (levels) 1184 free(levels, M_TEMP); 1185 return (error); 1186 } 1187 #endif 1188 1189 /* 1190 * Passive cooling thread; monitors current temperature according to the 1191 * cooling interval and calculates whether to scale back CPU frequency. 1192 */ 1193 static void 1194 acpi_tz_cooling_thread(void *arg) 1195 { 1196 struct acpi_tz_softc *sc; 1197 int perf, curr_temp, prev_temp; 1198 #ifdef __FreeBSD__ 1199 int error; 1200 #endif 1201 1202 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1203 1204 sc = (struct acpi_tz_softc *)arg; 1205 get_mplock(); 1206 1207 prev_temp = sc->tz_temperature; 1208 while (sc->tz_cooling_enabled) { 1209 if (sc->tz_cooling_active) 1210 (void)acpi_tz_get_temperature(sc); 1211 curr_temp = sc->tz_temperature; 1212 if (curr_temp >= sc->tz_zone.psv) 1213 sc->tz_cooling_active = TRUE; 1214 if (sc->tz_cooling_active) { 1215 perf = sc->tz_zone.tc1 * (curr_temp - prev_temp) + 1216 sc->tz_zone.tc2 * (curr_temp - sc->tz_zone.psv); 1217 perf /= 10; 1218 1219 if (perf != 0) { 1220 #ifdef __FreeBSD__ 1221 error = acpi_tz_cpufreq_update(sc, perf); 1222 1223 /* 1224 * If error and not simply a higher priority setting was 1225 * active, disable cooling. 1226 */ 1227 if (error != 0 && error != EPERM) { 1228 device_printf(sc->tz_dev, 1229 "failed to set new freq, disabling passive cooling\n"); 1230 sc->tz_cooling_enabled = FALSE; 1231 } 1232 #endif 1233 } 1234 } 1235 prev_temp = curr_temp; 1236 tsleep(&sc->tz_cooling_proc, 0, "cooling", 1237 hz * sc->tz_zone.tsp / 10); 1238 } 1239 if (sc->tz_cooling_active) { 1240 #ifdef __FreeBSD__ 1241 acpi_tz_cpufreq_restore(sc); 1242 #endif 1243 sc->tz_cooling_active = FALSE; 1244 } 1245 sc->tz_cooling_proc = NULL; 1246 ACPI_LOCK(thermal); 1247 sc->tz_cooling_proc_running = FALSE; 1248 ACPI_UNLOCK(thermal); 1249 rel_mplock(); 1250 } 1251 1252 /* 1253 * TODO: We ignore _PSL (list of cooling devices) since cpufreq enumerates 1254 * all CPUs for us. However, it's possible in the future _PSL will 1255 * reference non-CPU devices so we may want to support it then. 1256 */ 1257 static int 1258 acpi_tz_cooling_is_available(struct acpi_tz_softc *sc) 1259 { 1260 return (sc->tz_zone.tc1 != -1 && sc->tz_zone.tc2 != -1 && 1261 sc->tz_zone.tsp != -1 && sc->tz_zone.tsp != 0 && 1262 sc->tz_zone.psv != -1); 1263 } 1264 1265 static int 1266 acpi_tz_cooling_thread_start(struct acpi_tz_softc *sc) 1267 { 1268 int error; 1269 1270 ACPI_LOCK(thermal); 1271 if (sc->tz_cooling_proc_running) { 1272 ACPI_UNLOCK(thermal); 1273 return (0); 1274 } 1275 sc->tz_cooling_proc_running = TRUE; 1276 ACPI_UNLOCK(thermal); 1277 error = 0; 1278 if (sc->tz_cooling_proc == NULL) { 1279 error = kthread_create(acpi_tz_cooling_thread, sc, 1280 &sc->tz_cooling_proc, 1281 "acpi_cooling%d", device_get_unit(sc->tz_dev)); 1282 if (error != 0) { 1283 device_printf(sc->tz_dev, "could not create thread - %d", error); 1284 ACPI_LOCK(thermal); 1285 sc->tz_cooling_proc_running = FALSE; 1286 ACPI_UNLOCK(thermal); 1287 } 1288 } 1289 return (error); 1290 } 1291