1 /* 2 * Generic driver for the Advanced Systems Inc. SCSI controllers 3 * Product specific probe and attach routines can be found in: 4 * 5 * i386/isa/adv_isa.c ABP5140, ABP542, ABP5150, ABP842, ABP852 6 * i386/eisa/adv_eisa.c ABP742, ABP752 7 * pci/adv_pci.c ABP920, ABP930, ABP930U, ABP930UA, ABP940, ABP940U, 8 * ABP940UA, ABP950, ABP960, ABP960U, ABP960UA, 9 * ABP970, ABP970U 10 * 11 * Copyright (c) 1996-2000 Justin Gibbs. 12 * All rights reserved. 13 * 14 * Redistribution and use in source and binary forms, with or without 15 * modification, are permitted provided that the following conditions 16 * are met: 17 * 1. Redistributions of source code must retain the above copyright 18 * notice, this list of conditions, and the following disclaimer, 19 * without modification, immediately at the beginning of the file. 20 * 2. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * $FreeBSD: src/sys/dev/advansys/advansys.c,v 1.14.2.4 2002/01/06 21:21:42 dwmalone Exp $ 36 * $DragonFly: src/sys/dev/disk/advansys/advansys.c,v 1.6 2004/09/17 03:39:38 joerg Exp $ 37 */ 38 /* 39 * Ported from: 40 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 41 * 42 * Copyright (c) 1995-1997 Advanced System Products, Inc. 43 * All Rights Reserved. 44 * 45 * Redistribution and use in source and binary forms, with or without 46 * modification, are permitted provided that redistributions of source 47 * code retain the above copyright notice and this comment without 48 * modification. 49 */ 50 51 #include <sys/param.h> 52 #include <sys/systm.h> 53 #include <sys/malloc.h> 54 #include <sys/kernel.h> 55 56 #include <machine/bus_pio.h> 57 #include <machine/bus.h> 58 #include <machine/resource.h> 59 #include <sys/bus.h> 60 #include <sys/rman.h> 61 62 #include <bus/cam/cam.h> 63 #include <bus/cam/cam_ccb.h> 64 #include <bus/cam/cam_sim.h> 65 #include <bus/cam/cam_xpt_sim.h> 66 #include <bus/cam/cam_xpt_periph.h> 67 #include <bus/cam/cam_debug.h> 68 69 #include <bus/cam/scsi/scsi_all.h> 70 #include <bus/cam/scsi/scsi_message.h> 71 72 #include <vm/vm.h> 73 #include <vm/vm_param.h> 74 #include <vm/pmap.h> 75 76 #include "advansys.h" 77 78 static void adv_action(struct cam_sim *sim, union ccb *ccb); 79 static void adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 80 int nsegments, int error); 81 static void adv_poll(struct cam_sim *sim); 82 static void adv_run_doneq(struct adv_softc *adv); 83 static struct adv_ccb_info * 84 adv_alloc_ccb_info(struct adv_softc *adv); 85 static void adv_destroy_ccb_info(struct adv_softc *adv, 86 struct adv_ccb_info *cinfo); 87 static __inline struct adv_ccb_info * 88 adv_get_ccb_info(struct adv_softc *adv); 89 static __inline void adv_free_ccb_info(struct adv_softc *adv, 90 struct adv_ccb_info *cinfo); 91 static __inline void adv_set_state(struct adv_softc *adv, adv_state state); 92 static __inline void adv_clear_state(struct adv_softc *adv, union ccb* ccb); 93 static void adv_clear_state_really(struct adv_softc *adv, union ccb* ccb); 94 95 static __inline struct adv_ccb_info * 96 adv_get_ccb_info(struct adv_softc *adv) 97 { 98 struct adv_ccb_info *cinfo; 99 int opri; 100 101 opri = splcam(); 102 if ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 103 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 104 } else { 105 cinfo = adv_alloc_ccb_info(adv); 106 } 107 splx(opri); 108 109 return (cinfo); 110 } 111 112 static __inline void 113 adv_free_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 114 { 115 int opri; 116 117 opri = splcam(); 118 cinfo->state = ACCB_FREE; 119 SLIST_INSERT_HEAD(&adv->free_ccb_infos, cinfo, links); 120 splx(opri); 121 } 122 123 static __inline void 124 adv_set_state(struct adv_softc *adv, adv_state state) 125 { 126 if (adv->state == 0) 127 xpt_freeze_simq(adv->sim, /*count*/1); 128 adv->state |= state; 129 } 130 131 static __inline void 132 adv_clear_state(struct adv_softc *adv, union ccb* ccb) 133 { 134 if (adv->state != 0) 135 adv_clear_state_really(adv, ccb); 136 } 137 138 static void 139 adv_clear_state_really(struct adv_softc *adv, union ccb* ccb) 140 { 141 if ((adv->state & ADV_BUSDMA_BLOCK_CLEARED) != 0) 142 adv->state &= ~(ADV_BUSDMA_BLOCK_CLEARED|ADV_BUSDMA_BLOCK); 143 if ((adv->state & ADV_RESOURCE_SHORTAGE) != 0) { 144 int openings; 145 146 openings = adv->max_openings - adv->cur_active - ADV_MIN_FREE_Q; 147 if (openings >= adv->openings_needed) { 148 adv->state &= ~ADV_RESOURCE_SHORTAGE; 149 adv->openings_needed = 0; 150 } 151 } 152 153 if ((adv->state & ADV_IN_TIMEOUT) != 0) { 154 struct adv_ccb_info *cinfo; 155 156 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 157 if ((cinfo->state & ACCB_RECOVERY_CCB) != 0) { 158 struct ccb_hdr *ccb_h; 159 160 /* 161 * We now traverse our list of pending CCBs 162 * and reinstate their timeouts. 163 */ 164 ccb_h = LIST_FIRST(&adv->pending_ccbs); 165 while (ccb_h != NULL) { 166 callout_reset(&ccb_h->timeout_ch, 167 (ccb_h->timeout * hz) / 1000, 168 adv_timeout, ccb_h); 169 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 170 } 171 adv->state &= ~ADV_IN_TIMEOUT; 172 printf("%s: No longer in timeout\n", adv_name(adv)); 173 } 174 } 175 if (adv->state == 0) 176 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 177 } 178 179 void 180 adv_map(void *arg, bus_dma_segment_t *segs, int nseg, int error) 181 { 182 bus_addr_t* physaddr; 183 184 physaddr = (bus_addr_t*)arg; 185 *physaddr = segs->ds_addr; 186 } 187 188 char * 189 adv_name(struct adv_softc *adv) 190 { 191 static char name[10]; 192 193 snprintf(name, sizeof(name), "adv%d", adv->unit); 194 return (name); 195 } 196 197 static void 198 adv_action(struct cam_sim *sim, union ccb *ccb) 199 { 200 struct adv_softc *adv; 201 202 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n")); 203 204 adv = (struct adv_softc *)cam_sim_softc(sim); 205 206 switch (ccb->ccb_h.func_code) { 207 /* Common cases first */ 208 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 209 { 210 struct ccb_hdr *ccb_h; 211 struct ccb_scsiio *csio; 212 struct adv_ccb_info *cinfo; 213 214 ccb_h = &ccb->ccb_h; 215 csio = &ccb->csio; 216 cinfo = adv_get_ccb_info(adv); 217 if (cinfo == NULL) 218 panic("XXX Handle CCB info error!!!"); 219 220 ccb_h->ccb_cinfo_ptr = cinfo; 221 cinfo->ccb = ccb; 222 223 /* Only use S/G if there is a transfer */ 224 if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 225 if ((ccb_h->flags & CAM_SCATTER_VALID) == 0) { 226 /* 227 * We've been given a pointer 228 * to a single buffer 229 */ 230 if ((ccb_h->flags & CAM_DATA_PHYS) == 0) { 231 int s; 232 int error; 233 234 s = splsoftvm(); 235 error = 236 bus_dmamap_load(adv->buffer_dmat, 237 cinfo->dmamap, 238 csio->data_ptr, 239 csio->dxfer_len, 240 adv_execute_ccb, 241 csio, /*flags*/0); 242 if (error == EINPROGRESS) { 243 /* 244 * So as to maintain ordering, 245 * freeze the controller queue 246 * until our mapping is 247 * returned. 248 */ 249 adv_set_state(adv, 250 ADV_BUSDMA_BLOCK); 251 } 252 splx(s); 253 } else { 254 struct bus_dma_segment seg; 255 256 /* Pointer to physical buffer */ 257 seg.ds_addr = 258 (bus_addr_t)csio->data_ptr; 259 seg.ds_len = csio->dxfer_len; 260 adv_execute_ccb(csio, &seg, 1, 0); 261 } 262 } else { 263 struct bus_dma_segment *segs; 264 if ((ccb_h->flags & CAM_DATA_PHYS) != 0) 265 panic("adv_setup_data - Physical " 266 "segment pointers unsupported"); 267 268 if ((ccb_h->flags & CAM_SG_LIST_PHYS) == 0) 269 panic("adv_setup_data - Virtual " 270 "segment addresses unsupported"); 271 272 /* Just use the segments provided */ 273 segs = (struct bus_dma_segment *)csio->data_ptr; 274 adv_execute_ccb(ccb, segs, csio->sglist_cnt, 0); 275 } 276 } else { 277 adv_execute_ccb(ccb, NULL, 0, 0); 278 } 279 break; 280 } 281 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 282 case XPT_TARGET_IO: /* Execute target I/O request */ 283 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 284 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 285 case XPT_EN_LUN: /* Enable LUN as a target */ 286 case XPT_ABORT: /* Abort the specified CCB */ 287 /* XXX Implement */ 288 ccb->ccb_h.status = CAM_REQ_INVALID; 289 xpt_done(ccb); 290 break; 291 case XPT_SET_TRAN_SETTINGS: 292 { 293 struct ccb_trans_settings *cts; 294 target_bit_vector targ_mask; 295 struct adv_transinfo *tconf; 296 u_int update_type; 297 int s; 298 299 cts = &ccb->cts; 300 targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 301 update_type = 0; 302 303 /* 304 * The user must specify which type of settings he wishes 305 * to change. 306 */ 307 if (((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) 308 && ((cts->flags & CCB_TRANS_USER_SETTINGS) == 0)) { 309 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 310 update_type |= ADV_TRANS_GOAL; 311 } else if (((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) 312 && ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) == 0)) { 313 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 314 update_type |= ADV_TRANS_USER; 315 } else { 316 ccb->ccb_h.status = CAM_REQ_INVALID; 317 break; 318 } 319 320 s = splcam(); 321 322 if ((update_type & ADV_TRANS_GOAL) != 0) { 323 if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) { 324 if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) 325 adv->disc_enable |= targ_mask; 326 else 327 adv->disc_enable &= ~targ_mask; 328 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, 329 adv->disc_enable); 330 } 331 332 if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) { 333 if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) 334 adv->cmd_qng_enabled |= targ_mask; 335 else 336 adv->cmd_qng_enabled &= ~targ_mask; 337 } 338 } 339 340 if ((update_type & ADV_TRANS_USER) != 0) { 341 if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) { 342 if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) 343 adv->user_disc_enable |= targ_mask; 344 else 345 adv->user_disc_enable &= ~targ_mask; 346 } 347 348 if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) { 349 if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) 350 adv->user_cmd_qng_enabled |= targ_mask; 351 else 352 adv->user_cmd_qng_enabled &= ~targ_mask; 353 } 354 } 355 356 /* 357 * If the user specifies either the sync rate, or offset, 358 * but not both, the unspecified parameter defaults to its 359 * current value in transfer negotiations. 360 */ 361 if (((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) 362 || ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)) { 363 /* 364 * If the user provided a sync rate but no offset, 365 * use the current offset. 366 */ 367 if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) == 0) 368 cts->sync_offset = tconf->offset; 369 370 /* 371 * If the user provided an offset but no sync rate, 372 * use the current sync rate. 373 */ 374 if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) == 0) 375 cts->sync_period = tconf->period; 376 377 adv_period_offset_to_sdtr(adv, &cts->sync_period, 378 &cts->sync_offset, 379 cts->ccb_h.target_id); 380 381 adv_set_syncrate(adv, /*struct cam_path */NULL, 382 cts->ccb_h.target_id, cts->sync_period, 383 cts->sync_offset, update_type); 384 } 385 386 splx(s); 387 ccb->ccb_h.status = CAM_REQ_CMP; 388 xpt_done(ccb); 389 break; 390 } 391 case XPT_GET_TRAN_SETTINGS: 392 /* Get default/user set transfer settings for the target */ 393 { 394 struct ccb_trans_settings *cts; 395 struct adv_transinfo *tconf; 396 target_bit_vector target_mask; 397 int s; 398 399 cts = &ccb->cts; 400 target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 401 402 cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB); 403 404 s = splcam(); 405 if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) { 406 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 407 if ((adv->disc_enable & target_mask) != 0) 408 cts->flags |= CCB_TRANS_DISC_ENB; 409 if ((adv->cmd_qng_enabled & target_mask) != 0) 410 cts->flags |= CCB_TRANS_TAG_ENB; 411 } else { 412 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 413 if ((adv->user_disc_enable & target_mask) != 0) 414 cts->flags |= CCB_TRANS_DISC_ENB; 415 if ((adv->user_cmd_qng_enabled & target_mask) != 0) 416 cts->flags |= CCB_TRANS_TAG_ENB; 417 } 418 419 cts->sync_period = tconf->period; 420 cts->sync_offset = tconf->offset; 421 splx(s); 422 423 cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 424 cts->valid = CCB_TRANS_SYNC_RATE_VALID 425 | CCB_TRANS_SYNC_OFFSET_VALID 426 | CCB_TRANS_BUS_WIDTH_VALID 427 | CCB_TRANS_DISC_VALID 428 | CCB_TRANS_TQ_VALID; 429 ccb->ccb_h.status = CAM_REQ_CMP; 430 xpt_done(ccb); 431 break; 432 } 433 case XPT_CALC_GEOMETRY: 434 { 435 struct ccb_calc_geometry *ccg; 436 u_int32_t size_mb; 437 u_int32_t secs_per_cylinder; 438 int extended; 439 440 ccg = &ccb->ccg; 441 size_mb = ccg->volume_size 442 / ((1024L * 1024L) / ccg->block_size); 443 extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0; 444 445 if (size_mb > 1024 && extended) { 446 ccg->heads = 255; 447 ccg->secs_per_track = 63; 448 } else { 449 ccg->heads = 64; 450 ccg->secs_per_track = 32; 451 } 452 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 453 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 454 ccb->ccb_h.status = CAM_REQ_CMP; 455 xpt_done(ccb); 456 break; 457 } 458 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 459 { 460 int s; 461 462 s = splcam(); 463 adv_stop_execution(adv); 464 adv_reset_bus(adv, /*initiate_reset*/TRUE); 465 adv_start_execution(adv); 466 splx(s); 467 468 ccb->ccb_h.status = CAM_REQ_CMP; 469 xpt_done(ccb); 470 break; 471 } 472 case XPT_TERM_IO: /* Terminate the I/O process */ 473 /* XXX Implement */ 474 ccb->ccb_h.status = CAM_REQ_INVALID; 475 xpt_done(ccb); 476 break; 477 case XPT_PATH_INQ: /* Path routing inquiry */ 478 { 479 struct ccb_pathinq *cpi = &ccb->cpi; 480 481 cpi->version_num = 1; /* XXX??? */ 482 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 483 cpi->target_sprt = 0; 484 cpi->hba_misc = 0; 485 cpi->hba_eng_cnt = 0; 486 cpi->max_target = 7; 487 cpi->max_lun = 7; 488 cpi->initiator_id = adv->scsi_id; 489 cpi->bus_id = cam_sim_bus(sim); 490 cpi->base_transfer_speed = 3300; 491 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 492 strncpy(cpi->hba_vid, "Advansys", HBA_IDLEN); 493 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 494 cpi->unit_number = cam_sim_unit(sim); 495 cpi->ccb_h.status = CAM_REQ_CMP; 496 xpt_done(ccb); 497 break; 498 } 499 default: 500 ccb->ccb_h.status = CAM_REQ_INVALID; 501 xpt_done(ccb); 502 break; 503 } 504 } 505 506 /* 507 * Currently, the output of bus_dmammap_load suits our needs just 508 * fine, but should it change, we'd need to do something here. 509 */ 510 #define adv_fixup_dmasegs(adv, dm_segs) (struct adv_sg_entry *)(dm_segs) 511 512 static void 513 adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 514 int nsegments, int error) 515 { 516 struct ccb_scsiio *csio; 517 struct ccb_hdr *ccb_h; 518 struct cam_sim *sim; 519 struct adv_softc *adv; 520 struct adv_ccb_info *cinfo; 521 struct adv_scsi_q scsiq; 522 struct adv_sg_head sghead; 523 int s; 524 525 csio = (struct ccb_scsiio *)arg; 526 ccb_h = &csio->ccb_h; 527 sim = xpt_path_sim(ccb_h->path); 528 adv = (struct adv_softc *)cam_sim_softc(sim); 529 cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr; 530 531 /* 532 * Setup our done routine to release the simq on 533 * the next ccb that completes. 534 */ 535 if ((adv->state & ADV_BUSDMA_BLOCK) != 0) 536 adv->state |= ADV_BUSDMA_BLOCK_CLEARED; 537 538 if ((ccb_h->flags & CAM_CDB_POINTER) != 0) { 539 if ((ccb_h->flags & CAM_CDB_PHYS) == 0) { 540 /* XXX Need phystovirt!!!! */ 541 /* How about pmap_kenter??? */ 542 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 543 } else { 544 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 545 } 546 } else { 547 scsiq.cdbptr = csio->cdb_io.cdb_bytes; 548 } 549 /* 550 * Build up the request 551 */ 552 scsiq.q1.status = 0; 553 scsiq.q1.q_no = 0; 554 scsiq.q1.cntl = 0; 555 scsiq.q1.sg_queue_cnt = 0; 556 scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id); 557 scsiq.q1.target_lun = ccb_h->target_lun; 558 scsiq.q1.sense_len = csio->sense_len; 559 scsiq.q1.extra_bytes = 0; 560 scsiq.q2.ccb_index = cinfo - adv->ccb_infos; 561 scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id, 562 ccb_h->target_lun); 563 scsiq.q2.flag = 0; 564 scsiq.q2.cdb_len = csio->cdb_len; 565 if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0) 566 scsiq.q2.tag_code = csio->tag_action; 567 else 568 scsiq.q2.tag_code = 0; 569 scsiq.q2.vm_id = 0; 570 571 if (nsegments != 0) { 572 bus_dmasync_op_t op; 573 574 scsiq.q1.data_addr = dm_segs->ds_addr; 575 scsiq.q1.data_cnt = dm_segs->ds_len; 576 if (nsegments > 1) { 577 scsiq.q1.cntl |= QC_SG_HEAD; 578 sghead.entry_cnt 579 = sghead.entry_to_copy 580 = nsegments; 581 sghead.res = 0; 582 sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs); 583 scsiq.sg_head = &sghead; 584 } else { 585 scsiq.sg_head = NULL; 586 } 587 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN) 588 op = BUS_DMASYNC_PREREAD; 589 else 590 op = BUS_DMASYNC_PREWRITE; 591 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 592 } else { 593 scsiq.q1.data_addr = 0; 594 scsiq.q1.data_cnt = 0; 595 scsiq.sg_head = NULL; 596 } 597 598 s = splcam(); 599 600 /* 601 * Last time we need to check if this SCB needs to 602 * be aborted. 603 */ 604 if (ccb_h->status != CAM_REQ_INPROG) { 605 if (nsegments != 0) 606 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 607 adv_clear_state(adv, (union ccb *)csio); 608 adv_free_ccb_info(adv, cinfo); 609 xpt_done((union ccb *)csio); 610 splx(s); 611 return; 612 } 613 614 if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) { 615 /* Temporary resource shortage */ 616 adv_set_state(adv, ADV_RESOURCE_SHORTAGE); 617 if (nsegments != 0) 618 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 619 csio->ccb_h.status = CAM_REQUEUE_REQ; 620 adv_clear_state(adv, (union ccb *)csio); 621 adv_free_ccb_info(adv, cinfo); 622 xpt_done((union ccb *)csio); 623 splx(s); 624 return; 625 } 626 cinfo->state |= ACCB_ACTIVE; 627 ccb_h->status |= CAM_SIM_QUEUED; 628 LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le); 629 /* Schedule our timeout */ 630 callout_reset(&ccb_h->timeout_ch, (ccb_h->timeout * hz)/1000, 631 adv_timeout, csio); 632 splx(s); 633 } 634 635 static struct adv_ccb_info * 636 adv_alloc_ccb_info(struct adv_softc *adv) 637 { 638 int error; 639 struct adv_ccb_info *cinfo; 640 641 cinfo = &adv->ccb_infos[adv->ccb_infos_allocated]; 642 cinfo->state = ACCB_FREE; 643 error = bus_dmamap_create(adv->buffer_dmat, /*flags*/0, 644 &cinfo->dmamap); 645 if (error != 0) { 646 printf("%s: Unable to allocate CCB info " 647 "dmamap - error %d\n", adv_name(adv), error); 648 return (NULL); 649 } 650 adv->ccb_infos_allocated++; 651 return (cinfo); 652 } 653 654 static void 655 adv_destroy_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 656 { 657 bus_dmamap_destroy(adv->buffer_dmat, cinfo->dmamap); 658 } 659 660 void 661 adv_timeout(void *arg) 662 { 663 int s; 664 union ccb *ccb; 665 struct adv_softc *adv; 666 struct adv_ccb_info *cinfo; 667 668 ccb = (union ccb *)arg; 669 adv = (struct adv_softc *)xpt_path_sim(ccb->ccb_h.path)->softc; 670 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 671 672 xpt_print_path(ccb->ccb_h.path); 673 printf("Timed out\n"); 674 675 s = splcam(); 676 /* Have we been taken care of already?? */ 677 if (cinfo == NULL || cinfo->state == ACCB_FREE) { 678 splx(s); 679 return; 680 } 681 682 adv_stop_execution(adv); 683 684 if ((cinfo->state & ACCB_ABORT_QUEUED) == 0) { 685 struct ccb_hdr *ccb_h; 686 687 /* 688 * In order to simplify the recovery process, we ask the XPT 689 * layer to halt the queue of new transactions and we traverse 690 * the list of pending CCBs and remove their timeouts. This 691 * means that the driver attempts to clear only one error 692 * condition at a time. In general, timeouts that occur 693 * close together are related anyway, so there is no benefit 694 * in attempting to handle errors in parrallel. Timeouts will 695 * be reinstated when the recovery process ends. 696 */ 697 adv_set_state(adv, ADV_IN_TIMEOUT); 698 699 /* This CCB is the CCB representing our recovery actions */ 700 cinfo->state |= ACCB_RECOVERY_CCB|ACCB_ABORT_QUEUED; 701 702 ccb_h = LIST_FIRST(&adv->pending_ccbs); 703 while (ccb_h != NULL) { 704 callout_stop(&ccb_h->timeout_ch); 705 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 706 } 707 708 /* XXX Should send a BDR */ 709 /* Attempt an abort as our first tact */ 710 xpt_print_path(ccb->ccb_h.path); 711 printf("Attempting abort\n"); 712 adv_abort_ccb(adv, ccb->ccb_h.target_id, 713 ccb->ccb_h.target_lun, ccb, 714 CAM_CMD_TIMEOUT, /*queued_only*/FALSE); 715 callout_reset(&ccb->ccb_h.timeout_ch, 2 * hz, adv_timeout, ccb); 716 } else { 717 /* Our attempt to perform an abort failed, go for a reset */ 718 xpt_print_path(ccb->ccb_h.path); 719 printf("Resetting bus\n"); 720 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 721 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 722 adv_reset_bus(adv, /*initiate_reset*/TRUE); 723 } 724 adv_start_execution(adv); 725 splx(s); 726 } 727 728 struct adv_softc * 729 adv_alloc(device_t dev, bus_space_tag_t tag, bus_space_handle_t bsh) 730 { 731 struct adv_softc *adv = device_get_softc(dev); 732 733 /* 734 * Allocate a storage area for us 735 */ 736 LIST_INIT(&adv->pending_ccbs); 737 SLIST_INIT(&adv->free_ccb_infos); 738 adv->dev = dev; 739 adv->unit = device_get_unit(dev); 740 adv->tag = tag; 741 adv->bsh = bsh; 742 743 return(adv); 744 } 745 746 void 747 adv_free(struct adv_softc *adv) 748 { 749 switch (adv->init_level) { 750 case 6: 751 { 752 struct adv_ccb_info *cinfo; 753 754 while ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 755 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 756 adv_destroy_ccb_info(adv, cinfo); 757 } 758 759 bus_dmamap_unload(adv->sense_dmat, adv->sense_dmamap); 760 } 761 case 5: 762 bus_dmamem_free(adv->sense_dmat, adv->sense_buffers, 763 adv->sense_dmamap); 764 case 4: 765 bus_dma_tag_destroy(adv->sense_dmat); 766 case 3: 767 bus_dma_tag_destroy(adv->buffer_dmat); 768 case 2: 769 bus_dma_tag_destroy(adv->parent_dmat); 770 case 1: 771 if (adv->ccb_infos != NULL) 772 free(adv->ccb_infos, M_DEVBUF); 773 case 0: 774 break; 775 } 776 } 777 778 int 779 adv_init(struct adv_softc *adv) 780 { 781 struct adv_eeprom_config eeprom_config; 782 int checksum, i; 783 int max_sync; 784 u_int16_t config_lsw; 785 u_int16_t config_msw; 786 787 adv_lib_init(adv); 788 789 /* 790 * Stop script execution. 791 */ 792 adv_write_lram_16(adv, ADV_HALTCODE_W, 0x00FE); 793 adv_stop_execution(adv); 794 if (adv_stop_chip(adv) == 0 || adv_is_chip_halted(adv) == 0) { 795 printf("adv%d: Unable to halt adapter. Initialization" 796 "failed\n", adv->unit); 797 return (1); 798 } 799 ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR); 800 if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) { 801 printf("adv%d: Unable to set program counter. Initialization" 802 "failed\n", adv->unit); 803 return (1); 804 } 805 806 config_msw = ADV_INW(adv, ADV_CONFIG_MSW); 807 config_lsw = ADV_INW(adv, ADV_CONFIG_LSW); 808 809 if ((config_msw & ADV_CFG_MSW_CLR_MASK) != 0) { 810 config_msw &= ~ADV_CFG_MSW_CLR_MASK; 811 /* 812 * XXX The Linux code flags this as an error, 813 * but what should we report to the user??? 814 * It seems that clearing the config register 815 * makes this error recoverable. 816 */ 817 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 818 } 819 820 /* Suck in the configuration from the EEProm */ 821 checksum = adv_get_eeprom_config(adv, &eeprom_config); 822 823 if (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_AUTO_CONFIG) { 824 /* 825 * XXX The Linux code sets a warning level for this 826 * condition, yet nothing of meaning is printed to 827 * the user. What does this mean??? 828 */ 829 if (adv->chip_version == 3) { 830 if (eeprom_config.cfg_lsw != config_lsw) 831 eeprom_config.cfg_lsw = config_lsw; 832 if (eeprom_config.cfg_msw != config_msw) { 833 eeprom_config.cfg_msw = config_msw; 834 } 835 } 836 } 837 if (checksum == eeprom_config.chksum) { 838 839 /* Range/Sanity checking */ 840 if (eeprom_config.max_total_qng < ADV_MIN_TOTAL_QNG) { 841 eeprom_config.max_total_qng = ADV_MIN_TOTAL_QNG; 842 } 843 if (eeprom_config.max_total_qng > ADV_MAX_TOTAL_QNG) { 844 eeprom_config.max_total_qng = ADV_MAX_TOTAL_QNG; 845 } 846 if (eeprom_config.max_tag_qng > eeprom_config.max_total_qng) { 847 eeprom_config.max_tag_qng = eeprom_config.max_total_qng; 848 } 849 if (eeprom_config.max_tag_qng < ADV_MIN_TAG_Q_PER_DVC) { 850 eeprom_config.max_tag_qng = ADV_MIN_TAG_Q_PER_DVC; 851 } 852 adv->max_openings = eeprom_config.max_total_qng; 853 adv->user_disc_enable = eeprom_config.disc_enable; 854 adv->user_cmd_qng_enabled = eeprom_config.use_cmd_qng; 855 adv->isa_dma_speed = EEPROM_DMA_SPEED(eeprom_config); 856 adv->scsi_id = EEPROM_SCSIID(eeprom_config) & ADV_MAX_TID; 857 EEPROM_SET_SCSIID(eeprom_config, adv->scsi_id); 858 adv->control = eeprom_config.cntl; 859 for (i = 0; i <= ADV_MAX_TID; i++) { 860 u_int8_t sync_data; 861 862 if ((eeprom_config.init_sdtr & (0x1 << i)) == 0) 863 sync_data = 0; 864 else 865 sync_data = eeprom_config.sdtr_data[i]; 866 adv_sdtr_to_period_offset(adv, 867 sync_data, 868 &adv->tinfo[i].user.period, 869 &adv->tinfo[i].user.offset, 870 i); 871 } 872 config_lsw = eeprom_config.cfg_lsw; 873 eeprom_config.cfg_msw = config_msw; 874 } else { 875 u_int8_t sync_data; 876 877 printf("adv%d: Warning EEPROM Checksum mismatch. " 878 "Using default device parameters\n", adv->unit); 879 880 /* Set reasonable defaults since we can't read the EEPROM */ 881 adv->isa_dma_speed = /*ADV_DEF_ISA_DMA_SPEED*/1; 882 adv->max_openings = ADV_DEF_MAX_TOTAL_QNG; 883 adv->disc_enable = TARGET_BIT_VECTOR_SET; 884 adv->user_disc_enable = TARGET_BIT_VECTOR_SET; 885 adv->cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 886 adv->user_cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 887 adv->scsi_id = 7; 888 adv->control = 0xFFFF; 889 890 if (adv->chip_version == ADV_CHIP_VER_PCI_ULTRA_3050) 891 /* Default to no Ultra to support the 3030 */ 892 adv->control &= ~ADV_CNTL_SDTR_ENABLE_ULTRA; 893 sync_data = ADV_DEF_SDTR_OFFSET | (ADV_DEF_SDTR_INDEX << 4); 894 for (i = 0; i <= ADV_MAX_TID; i++) { 895 adv_sdtr_to_period_offset(adv, sync_data, 896 &adv->tinfo[i].user.period, 897 &adv->tinfo[i].user.offset, 898 i); 899 } 900 config_lsw |= ADV_CFG_LSW_SCSI_PARITY_ON; 901 } 902 config_msw &= ~ADV_CFG_MSW_CLR_MASK; 903 config_lsw |= ADV_CFG_LSW_HOST_INT_ON; 904 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA) 905 && (adv->control & ADV_CNTL_SDTR_ENABLE_ULTRA) == 0) 906 /* 25ns or 10MHz */ 907 max_sync = 25; 908 else 909 /* Unlimited */ 910 max_sync = 0; 911 for (i = 0; i <= ADV_MAX_TID; i++) { 912 if (adv->tinfo[i].user.period < max_sync) 913 adv->tinfo[i].user.period = max_sync; 914 } 915 916 if (adv_test_external_lram(adv) == 0) { 917 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)) { 918 eeprom_config.max_total_qng = 919 ADV_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; 920 eeprom_config.max_tag_qng = 921 ADV_MAX_PCI_ULTRA_INRAM_TAG_QNG; 922 } else { 923 eeprom_config.cfg_msw |= 0x0800; 924 config_msw |= 0x0800; 925 eeprom_config.max_total_qng = 926 ADV_MAX_PCI_INRAM_TOTAL_QNG; 927 eeprom_config.max_tag_qng = ADV_MAX_INRAM_TAG_QNG; 928 } 929 adv->max_openings = eeprom_config.max_total_qng; 930 } 931 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 932 ADV_OUTW(adv, ADV_CONFIG_LSW, config_lsw); 933 #if 0 934 /* 935 * Don't write the eeprom data back for now. 936 * I'd rather not mess up the user's card. We also don't 937 * fully sanitize the eeprom settings above for the write-back 938 * to be 100% correct. 939 */ 940 if (adv_set_eeprom_config(adv, &eeprom_config) != 0) 941 printf("%s: WARNING! Failure writing to EEPROM.\n", 942 adv_name(adv)); 943 #endif 944 945 adv_set_chip_scsiid(adv, adv->scsi_id); 946 if (adv_init_lram_and_mcode(adv)) 947 return (1); 948 949 adv->disc_enable = adv->user_disc_enable; 950 951 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable); 952 for (i = 0; i <= ADV_MAX_TID; i++) { 953 /* 954 * Start off in async mode. 955 */ 956 adv_set_syncrate(adv, /*struct cam_path */NULL, 957 i, /*period*/0, /*offset*/0, 958 ADV_TRANS_CUR); 959 /* 960 * Enable the use of tagged commands on all targets. 961 * This allows the kernel driver to make up it's own mind 962 * as it sees fit to tag queue instead of having the 963 * firmware try and second guess the tag_code settins. 964 */ 965 adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + i, 966 adv->max_openings); 967 } 968 adv_write_lram_8(adv, ADVV_USE_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 969 adv_write_lram_8(adv, ADVV_CAN_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 970 printf("adv%d: AdvanSys %s Host Adapter, SCSI ID %d, queue depth %d\n", 971 adv->unit, (adv->type & ADV_ULTRA) && (max_sync == 0) 972 ? "Ultra SCSI" : "SCSI", 973 adv->scsi_id, adv->max_openings); 974 return (0); 975 } 976 977 void 978 adv_intr(void *arg) 979 { 980 struct adv_softc *adv; 981 u_int16_t chipstat; 982 u_int16_t saved_ram_addr; 983 u_int8_t ctrl_reg; 984 u_int8_t saved_ctrl_reg; 985 u_int8_t host_flag; 986 987 adv = (struct adv_softc *)arg; 988 989 chipstat = ADV_INW(adv, ADV_CHIP_STATUS); 990 991 /* Is it for us? */ 992 if ((chipstat & (ADV_CSW_INT_PENDING|ADV_CSW_SCSI_RESET_LATCH)) == 0) 993 return; 994 995 ctrl_reg = ADV_INB(adv, ADV_CHIP_CTRL); 996 saved_ctrl_reg = ctrl_reg & (~(ADV_CC_SCSI_RESET | ADV_CC_CHIP_RESET | 997 ADV_CC_SINGLE_STEP | ADV_CC_DIAG | 998 ADV_CC_TEST)); 999 1000 if ((chipstat & (ADV_CSW_SCSI_RESET_LATCH|ADV_CSW_SCSI_RESET_ACTIVE))) { 1001 printf("Detected Bus Reset\n"); 1002 adv_reset_bus(adv, /*initiate_reset*/FALSE); 1003 return; 1004 } 1005 1006 if ((chipstat & ADV_CSW_INT_PENDING) != 0) { 1007 1008 saved_ram_addr = ADV_INW(adv, ADV_LRAM_ADDR); 1009 host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B); 1010 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, 1011 host_flag | ADV_HOST_FLAG_IN_ISR); 1012 1013 adv_ack_interrupt(adv); 1014 1015 if ((chipstat & ADV_CSW_HALTED) != 0 1016 && (ctrl_reg & ADV_CC_SINGLE_STEP) != 0) { 1017 adv_isr_chip_halted(adv); 1018 saved_ctrl_reg &= ~ADV_CC_HALT; 1019 } else { 1020 adv_run_doneq(adv); 1021 } 1022 ADV_OUTW(adv, ADV_LRAM_ADDR, saved_ram_addr); 1023 #ifdef DIAGNOSTIC 1024 if (ADV_INW(adv, ADV_LRAM_ADDR) != saved_ram_addr) 1025 panic("adv_intr: Unable to set LRAM addr"); 1026 #endif 1027 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag); 1028 } 1029 1030 ADV_OUTB(adv, ADV_CHIP_CTRL, saved_ctrl_reg); 1031 } 1032 1033 void 1034 adv_run_doneq(struct adv_softc *adv) 1035 { 1036 struct adv_q_done_info scsiq; 1037 u_int doneq_head; 1038 u_int done_qno; 1039 1040 doneq_head = adv_read_lram_16(adv, ADVV_DONE_Q_TAIL_W) & 0xFF; 1041 done_qno = adv_read_lram_8(adv, ADV_QNO_TO_QADDR(doneq_head) 1042 + ADV_SCSIQ_B_FWD); 1043 while (done_qno != ADV_QLINK_END) { 1044 union ccb* ccb; 1045 struct adv_ccb_info *cinfo; 1046 u_int done_qaddr; 1047 u_int sg_queue_cnt; 1048 int aborted; 1049 1050 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 1051 1052 /* Pull status from this request */ 1053 sg_queue_cnt = adv_copy_lram_doneq(adv, done_qaddr, &scsiq, 1054 adv->max_dma_count); 1055 1056 /* Mark it as free */ 1057 adv_write_lram_8(adv, done_qaddr + ADV_SCSIQ_B_STATUS, 1058 scsiq.q_status & ~(QS_READY|QS_ABORTED)); 1059 1060 /* Process request based on retrieved info */ 1061 if ((scsiq.cntl & QC_SG_HEAD) != 0) { 1062 u_int i; 1063 1064 /* 1065 * S/G based request. Free all of the queue 1066 * structures that contained S/G information. 1067 */ 1068 for (i = 0; i < sg_queue_cnt; i++) { 1069 done_qno = adv_read_lram_8(adv, done_qaddr 1070 + ADV_SCSIQ_B_FWD); 1071 1072 #ifdef DIAGNOSTIC 1073 if (done_qno == ADV_QLINK_END) { 1074 panic("adv_qdone: Corrupted SG " 1075 "list encountered"); 1076 } 1077 #endif 1078 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 1079 1080 /* Mark SG queue as free */ 1081 adv_write_lram_8(adv, done_qaddr 1082 + ADV_SCSIQ_B_STATUS, QS_FREE); 1083 } 1084 } else 1085 sg_queue_cnt = 0; 1086 #ifdef DIAGNOSTIC 1087 if (adv->cur_active < (sg_queue_cnt + 1)) 1088 panic("adv_qdone: Attempting to free more " 1089 "queues than are active"); 1090 #endif 1091 adv->cur_active -= sg_queue_cnt + 1; 1092 1093 aborted = (scsiq.q_status & QS_ABORTED) != 0; 1094 1095 if ((scsiq.q_status != QS_DONE) 1096 && (scsiq.q_status & QS_ABORTED) == 0) 1097 panic("adv_qdone: completed scsiq with unknown status"); 1098 1099 scsiq.remain_bytes += scsiq.extra_bytes; 1100 1101 if ((scsiq.d3.done_stat == QD_WITH_ERROR) && 1102 (scsiq.d3.host_stat == QHSTA_M_DATA_OVER_RUN)) { 1103 if ((scsiq.cntl & (QC_DATA_IN|QC_DATA_OUT)) == 0) { 1104 scsiq.d3.done_stat = QD_NO_ERROR; 1105 scsiq.d3.host_stat = QHSTA_NO_ERROR; 1106 } 1107 } 1108 1109 cinfo = &adv->ccb_infos[scsiq.d2.ccb_index]; 1110 ccb = cinfo->ccb; 1111 ccb->csio.resid = scsiq.remain_bytes; 1112 adv_done(adv, ccb, 1113 scsiq.d3.done_stat, scsiq.d3.host_stat, 1114 scsiq.d3.scsi_stat, scsiq.q_no); 1115 1116 doneq_head = done_qno; 1117 done_qno = adv_read_lram_8(adv, done_qaddr + ADV_SCSIQ_B_FWD); 1118 } 1119 adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, doneq_head); 1120 } 1121 1122 1123 void 1124 adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat, 1125 u_int host_stat, u_int scsi_status, u_int q_no) 1126 { 1127 struct adv_ccb_info *cinfo; 1128 1129 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 1130 LIST_REMOVE(&ccb->ccb_h, sim_links.le); 1131 callout_stop(&ccb->ccb_h.timeout_ch); 1132 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1133 bus_dmasync_op_t op; 1134 1135 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1136 op = BUS_DMASYNC_POSTREAD; 1137 else 1138 op = BUS_DMASYNC_POSTWRITE; 1139 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 1140 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 1141 } 1142 1143 switch (done_stat) { 1144 case QD_NO_ERROR: 1145 if (host_stat == QHSTA_NO_ERROR) { 1146 ccb->ccb_h.status = CAM_REQ_CMP; 1147 break; 1148 } 1149 xpt_print_path(ccb->ccb_h.path); 1150 printf("adv_done - queue done without error, " 1151 "but host status non-zero(%x)\n", host_stat); 1152 /*FALLTHROUGH*/ 1153 case QD_WITH_ERROR: 1154 switch (host_stat) { 1155 case QHSTA_M_TARGET_STATUS_BUSY: 1156 case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY: 1157 /* 1158 * Assume that if we were a tagged transaction 1159 * the target reported queue full. Otherwise, 1160 * report busy. The firmware really should just 1161 * pass the original status back up to us even 1162 * if it thinks the target was in error for 1163 * returning this status as no other transactions 1164 * from this initiator are in effect, but this 1165 * ignores multi-initiator setups and there is 1166 * evidence that the firmware gets its per-device 1167 * transaction counts screwed up occassionally. 1168 */ 1169 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1170 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 1171 && host_stat != QHSTA_M_TARGET_STATUS_BUSY) 1172 scsi_status = SCSI_STATUS_QUEUE_FULL; 1173 else 1174 scsi_status = SCSI_STATUS_BUSY; 1175 adv_abort_ccb(adv, ccb->ccb_h.target_id, 1176 ccb->ccb_h.target_lun, 1177 /*ccb*/NULL, CAM_REQUEUE_REQ, 1178 /*queued_only*/TRUE); 1179 /*FALLTHROUGH*/ 1180 case QHSTA_M_NO_AUTO_REQ_SENSE: 1181 case QHSTA_NO_ERROR: 1182 ccb->csio.scsi_status = scsi_status; 1183 switch (scsi_status) { 1184 case SCSI_STATUS_CHECK_COND: 1185 case SCSI_STATUS_CMD_TERMINATED: 1186 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 1187 /* Structure copy */ 1188 ccb->csio.sense_data = 1189 adv->sense_buffers[q_no - 1]; 1190 /* FALLTHROUGH */ 1191 case SCSI_STATUS_BUSY: 1192 case SCSI_STATUS_RESERV_CONFLICT: 1193 case SCSI_STATUS_QUEUE_FULL: 1194 case SCSI_STATUS_COND_MET: 1195 case SCSI_STATUS_INTERMED: 1196 case SCSI_STATUS_INTERMED_COND_MET: 1197 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1198 break; 1199 case SCSI_STATUS_OK: 1200 ccb->ccb_h.status |= CAM_REQ_CMP; 1201 break; 1202 } 1203 break; 1204 case QHSTA_M_SEL_TIMEOUT: 1205 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1206 break; 1207 case QHSTA_M_DATA_OVER_RUN: 1208 ccb->ccb_h.status = CAM_DATA_RUN_ERR; 1209 break; 1210 case QHSTA_M_UNEXPECTED_BUS_FREE: 1211 ccb->ccb_h.status = CAM_UNEXP_BUSFREE; 1212 break; 1213 case QHSTA_M_BAD_BUS_PHASE_SEQ: 1214 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1215 break; 1216 case QHSTA_M_BAD_CMPL_STATUS_IN: 1217 /* No command complete after a status message */ 1218 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1219 break; 1220 case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT: 1221 case QHSTA_M_WTM_TIMEOUT: 1222 case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET: 1223 /* The SCSI bus hung in a phase */ 1224 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1225 adv_reset_bus(adv, /*initiate_reset*/TRUE); 1226 break; 1227 case QHSTA_M_AUTO_REQ_SENSE_FAIL: 1228 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 1229 break; 1230 case QHSTA_D_QDONE_SG_LIST_CORRUPTED: 1231 case QHSTA_D_ASC_DVC_ERROR_CODE_SET: 1232 case QHSTA_D_HOST_ABORT_FAILED: 1233 case QHSTA_D_EXE_SCSI_Q_FAILED: 1234 case QHSTA_D_ASPI_NO_BUF_POOL: 1235 case QHSTA_M_BAD_TAG_CODE: 1236 case QHSTA_D_LRAM_CMP_ERROR: 1237 case QHSTA_M_MICRO_CODE_ERROR_HALT: 1238 default: 1239 panic("%s: Unhandled Host status error %x", 1240 adv_name(adv), host_stat); 1241 /* NOTREACHED */ 1242 } 1243 break; 1244 1245 case QD_ABORTED_BY_HOST: 1246 /* Don't clobber any, more explicit, error codes we've set */ 1247 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) 1248 ccb->ccb_h.status = CAM_REQ_ABORTED; 1249 break; 1250 1251 default: 1252 xpt_print_path(ccb->ccb_h.path); 1253 printf("adv_done - queue done with unknown status %x:%x\n", 1254 done_stat, host_stat); 1255 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 1256 break; 1257 } 1258 adv_clear_state(adv, ccb); 1259 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP 1260 && (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) { 1261 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 1262 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1263 } 1264 adv_free_ccb_info(adv, cinfo); 1265 /* 1266 * Null this out so that we catch driver bugs that cause a 1267 * ccb to be completed twice. 1268 */ 1269 ccb->ccb_h.ccb_cinfo_ptr = NULL; 1270 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1271 xpt_done(ccb); 1272 } 1273 1274 /* 1275 * Function to poll for command completion when 1276 * interrupts are disabled (crash dumps) 1277 */ 1278 static void 1279 adv_poll(struct cam_sim *sim) 1280 { 1281 adv_intr(cam_sim_softc(sim)); 1282 } 1283 1284 /* 1285 * Attach all the sub-devices we can find 1286 */ 1287 int 1288 adv_attach(adv) 1289 struct adv_softc *adv; 1290 { 1291 struct ccb_setasync csa; 1292 int max_sg; 1293 1294 /* 1295 * Allocate an array of ccb mapping structures. We put the 1296 * index of the ccb_info structure into the queue representing 1297 * a transaction and use it for mapping the queue to the 1298 * upper level SCSI transaction it represents. 1299 */ 1300 adv->ccb_infos = malloc(sizeof(*adv->ccb_infos) * adv->max_openings, 1301 M_DEVBUF, M_WAITOK); 1302 adv->init_level++; 1303 1304 /* 1305 * Create our DMA tags. These tags define the kinds of device 1306 * accessible memory allocations and memory mappings we will 1307 * need to perform during normal operation. 1308 * 1309 * Unless we need to further restrict the allocation, we rely 1310 * on the restrictions of the parent dmat, hence the common 1311 * use of MAXADDR and MAXSIZE. 1312 * 1313 * The ASC boards use chains of "queues" (the transactional 1314 * resources on the board) to represent long S/G lists. 1315 * The first queue represents the command and holds a 1316 * single address and data pair. The queues that follow 1317 * can each hold ADV_SG_LIST_PER_Q entries. Given the 1318 * total number of queues, we can express the largest 1319 * transaction we can map. We reserve a few queues for 1320 * error recovery. Take those into account as well. 1321 * 1322 * There is a way to take an interrupt to download the 1323 * next batch of S/G entries if there are more than 255 1324 * of them (the counter in the queue structure is a u_int8_t). 1325 * We don't use this feature, so limit the S/G list size 1326 * accordingly. 1327 */ 1328 max_sg = (adv->max_openings - ADV_MIN_FREE_Q - 1) * ADV_SG_LIST_PER_Q; 1329 if (max_sg > 255) 1330 max_sg = 255; 1331 1332 /* DMA tag for mapping buffers into device visible space. */ 1333 if (bus_dma_tag_create(adv->parent_dmat, /*alignment*/1, /*boundary*/0, 1334 /*lowaddr*/BUS_SPACE_MAXADDR, 1335 /*highaddr*/BUS_SPACE_MAXADDR, 1336 /*filter*/NULL, /*filterarg*/NULL, 1337 /*maxsize*/MAXPHYS, 1338 /*nsegments*/max_sg, 1339 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1340 /*flags*/BUS_DMA_ALLOCNOW, 1341 &adv->buffer_dmat) != 0) { 1342 return (ENXIO); 1343 } 1344 adv->init_level++; 1345 1346 /* DMA tag for our sense buffers */ 1347 if (bus_dma_tag_create(adv->parent_dmat, /*alignment*/1, /*boundary*/0, 1348 /*lowaddr*/BUS_SPACE_MAXADDR, 1349 /*highaddr*/BUS_SPACE_MAXADDR, 1350 /*filter*/NULL, /*filterarg*/NULL, 1351 sizeof(struct scsi_sense_data)*adv->max_openings, 1352 /*nsegments*/1, 1353 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1354 /*flags*/0, &adv->sense_dmat) != 0) { 1355 return (ENXIO); 1356 } 1357 1358 adv->init_level++; 1359 1360 /* Allocation for our sense buffers */ 1361 if (bus_dmamem_alloc(adv->sense_dmat, (void **)&adv->sense_buffers, 1362 BUS_DMA_NOWAIT, &adv->sense_dmamap) != 0) { 1363 return (ENOMEM); 1364 } 1365 1366 adv->init_level++; 1367 1368 /* And permanently map them */ 1369 bus_dmamap_load(adv->sense_dmat, adv->sense_dmamap, 1370 adv->sense_buffers, 1371 sizeof(struct scsi_sense_data)*adv->max_openings, 1372 adv_map, &adv->sense_physbase, /*flags*/0); 1373 1374 adv->init_level++; 1375 1376 /* 1377 * Fire up the chip 1378 */ 1379 if (adv_start_chip(adv) != 1) { 1380 printf("adv%d: Unable to start on board processor. Aborting.\n", 1381 adv->unit); 1382 return (ENXIO); 1383 } 1384 1385 /* 1386 * Construct our SIM entry. 1387 */ 1388 adv->sim = cam_sim_alloc(adv_action, adv_poll, "adv", adv, adv->unit, 1389 1, adv->max_openings, NULL); 1390 if (adv->sim == NULL) 1391 return (ENOMEM); 1392 1393 /* 1394 * Register the bus. 1395 * 1396 * XXX Twin Channel EISA Cards??? 1397 */ 1398 if (xpt_bus_register(adv->sim, 0) != CAM_SUCCESS) { 1399 cam_sim_free(adv->sim); 1400 return (ENXIO); 1401 } 1402 1403 if (xpt_create_path(&adv->path, /*periph*/NULL, cam_sim_path(adv->sim), 1404 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) 1405 != CAM_REQ_CMP) { 1406 xpt_bus_deregister(cam_sim_path(adv->sim)); 1407 cam_sim_free(adv->sim); 1408 return (ENXIO); 1409 } 1410 1411 xpt_setup_ccb(&csa.ccb_h, adv->path, /*priority*/5); 1412 csa.ccb_h.func_code = XPT_SASYNC_CB; 1413 csa.event_enable = AC_FOUND_DEVICE|AC_LOST_DEVICE; 1414 csa.callback = advasync; 1415 csa.callback_arg = adv; 1416 xpt_action((union ccb *)&csa); 1417 return (0); 1418 } 1419