1 /* 2 * Product specific probe and attach routines for: 3 * Buslogic BT946, BT948, BT956, BT958 SCSI controllers 4 * 5 * Copyright (c) 1995, 1997, 1998 Justin T. Gibbs 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification, immediately at the beginning of the file. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * $FreeBSD: src/sys/dev/buslogic/bt_pci.c,v 1.11 2000/01/17 12:38:00 nyan Exp $ 30 * $DragonFly: src/sys/dev/disk/buslogic/bt_pci.c,v 1.2 2003/06/17 04:28:23 dillon Exp $ 31 */ 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/bus.h> 37 38 #include <pci/pcireg.h> 39 #include <pci/pcivar.h> 40 41 #include <machine/bus_memio.h> 42 #include <machine/bus_pio.h> 43 #include <machine/bus.h> 44 #include <machine/resource.h> 45 #include <sys/rman.h> 46 47 #include <dev/buslogic/btreg.h> 48 49 #define BT_PCI_IOADDR PCIR_MAPS 50 #define BT_PCI_MEMADDR PCIR_MAPS + 4 51 52 #define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040104Bul 53 #define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140104Bul 54 #define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130104Bul 55 56 static int 57 bt_pci_alloc_resources(device_t dev) 58 { 59 int command, type = 0, rid, zero; 60 struct resource *regs = 0; 61 struct resource *irq = 0; 62 63 command = pci_read_config(dev, PCIR_COMMAND, /*bytes*/1); 64 #if 0 65 /* XXX Memory Mapped I/O seems to cause problems */ 66 if (command & PCIM_CMD_MEMEN) { 67 type = SYS_RES_MEMORY; 68 rid = BT_PCI_MEMADDR; 69 regs = bus_alloc_resource(dev, type, &rid, 70 0, ~0, 1, RF_ACTIVE); 71 } 72 #else 73 if (!regs && (command & PCIM_CMD_PORTEN)) { 74 type = SYS_RES_IOPORT; 75 rid = BT_PCI_IOADDR; 76 regs = bus_alloc_resource(dev, type, &rid, 77 0, ~0, 1, RF_ACTIVE); 78 } 79 #endif 80 if (!regs) 81 return (ENOMEM); 82 83 zero = 0; 84 irq = bus_alloc_resource(dev, SYS_RES_IRQ, &zero, 85 0, ~0, 1, RF_ACTIVE | RF_SHAREABLE); 86 if (!irq) { 87 bus_release_resource(dev, type, rid, regs); 88 return (ENOMEM); 89 } 90 91 bt_init_softc(dev, regs, irq, 0); 92 93 return (0); 94 } 95 96 static void 97 bt_pci_release_resources(device_t dev) 98 { 99 struct bt_softc *bt = device_get_softc(dev); 100 101 if (bt->port) 102 /* XXX can't cope with memory registers anyway */ 103 bus_release_resource(dev, SYS_RES_IOPORT, 104 BT_PCI_IOADDR, bt->port); 105 if (bt->irq) 106 bus_release_resource(dev, SYS_RES_IRQ, 0, bt->irq); 107 bt_free_softc(dev); 108 } 109 110 static int 111 bt_pci_probe(device_t dev) 112 { 113 switch (pci_get_devid(dev)) { 114 case PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER: 115 case PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC: 116 { 117 struct bt_softc *bt = device_get_softc(dev); 118 pci_info_data_t pci_info; 119 int error; 120 121 error = bt_pci_alloc_resources(dev); 122 if (error) 123 return (error); 124 125 /* 126 * Determine if an ISA compatible I/O port has been 127 * enabled. If so, record the port so it will not 128 * be probed by our ISA probe. If the PCI I/O port 129 * was not set to the compatibility port, disable it. 130 */ 131 error = bt_cmd(bt, BOP_INQUIRE_PCI_INFO, 132 /*param*/NULL, /*paramlen*/0, 133 (u_int8_t*)&pci_info, sizeof(pci_info), 134 DEFAULT_CMD_TIMEOUT); 135 if (error == 0 136 && pci_info.io_port < BIO_DISABLED) { 137 bt_mark_probed_bio(pci_info.io_port); 138 if (rman_get_start(bt->port) != 139 bt_iop_from_bio(pci_info.io_port)) { 140 u_int8_t new_addr; 141 142 new_addr = BIO_DISABLED; 143 bt_cmd(bt, BOP_MODIFY_IO_ADDR, 144 /*param*/&new_addr, 145 /*paramlen*/1, /*reply_buf*/NULL, 146 /*reply_len*/0, 147 DEFAULT_CMD_TIMEOUT); 148 } 149 } 150 bt_pci_release_resources(dev); 151 device_set_desc(dev, "Buslogic Multi-Master SCSI Host Adapter"); 152 return (0); 153 } 154 default: 155 break; 156 } 157 158 return (ENXIO); 159 } 160 161 static int 162 bt_pci_attach(device_t dev) 163 { 164 struct bt_softc *bt = device_get_softc(dev); 165 int opri; 166 int error; 167 168 /* Initialize softc */ 169 error = bt_pci_alloc_resources(dev); 170 if (error) { 171 device_printf(dev, "can't allocate resources in bt_pci_attach\n"); 172 return error; 173 } 174 175 /* Allocate a dmatag for our CCB DMA maps */ 176 /* XXX Should be a child of the PCI bus dma tag */ 177 if (bus_dma_tag_create(/*parent*/NULL, /*alignemnt*/1, /*boundary*/0, 178 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 179 /*highaddr*/BUS_SPACE_MAXADDR, 180 /*filter*/NULL, /*filterarg*/NULL, 181 /*maxsize*/BUS_SPACE_MAXSIZE_32BIT, 182 /*nsegments*/BUS_SPACE_UNRESTRICTED, 183 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 184 /*flags*/0, &bt->parent_dmat) != 0) { 185 bt_pci_release_resources(dev); 186 return (ENOMEM); 187 } 188 189 /* 190 * Protect ourself from spurrious interrupts during 191 * intialization and attach. We should really rely 192 * on interrupts during attach, but we don't have 193 * access to our interrupts during ISA probes, so until 194 * that changes, we mask our interrupts during attach 195 * too. 196 */ 197 opri = splcam(); 198 199 if (bt_probe(dev) || bt_fetch_adapter_info(dev) || bt_init(dev)) { 200 bt_pci_release_resources(dev); 201 splx(opri); 202 return (ENXIO); 203 } 204 205 error = bt_attach(dev); 206 splx(opri); 207 208 if (error) { 209 bt_pci_release_resources(dev); 210 return (error); 211 } 212 213 return (0); 214 } 215 216 static device_method_t bt_pci_methods[] = { 217 /* Device interface */ 218 DEVMETHOD(device_probe, bt_pci_probe), 219 DEVMETHOD(device_attach, bt_pci_attach), 220 221 { 0, 0 } 222 }; 223 224 static driver_t bt_pci_driver = { 225 "bt", 226 bt_pci_methods, 227 sizeof(struct bt_softc), 228 }; 229 230 static devclass_t bt_devclass; 231 232 DRIVER_MODULE(bt, pci, bt_pci_driver, bt_devclass, 0, 0); 233