1 /*- 2 * Generic routines for LSI Fusion adapters. 3 * FreeBSD Version. 4 * 5 * Copyright (c) 2000, 2001 by Greg Ansley 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice immediately at the beginning of the file, without modification, 12 * this list of conditions, and the following disclaimer. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 /*- 29 * Copyright (c) 2002, 2006 by Matthew Jacob 30 * All rights reserved. 31 * 32 * Redistribution and use in source and binary forms, with or without 33 * modification, are permitted provided that the following conditions are 34 * met: 35 * 1. Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 38 * substantially similar to the "NO WARRANTY" disclaimer below 39 * ("Disclaimer") and any redistribution must be conditioned upon including 40 * a substantially similar Disclaimer requirement for further binary 41 * redistribution. 42 * 3. Neither the names of the above listed copyright holders nor the names 43 * of any contributors may be used to endorse or promote products derived 44 * from this software without specific prior written permission. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 47 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 49 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 50 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 51 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 52 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 53 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 54 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 55 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT 56 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 57 * 58 * Support from Chris Ellsworth in order to make SAS adapters work 59 * is gratefully acknowledged. 60 * 61 * 62 * Support from LSI-Logic has also gone a great deal toward making this a 63 * workable subsystem and is gratefully acknowledged. 64 */ 65 /*- 66 * Copyright (c) 2004, Avid Technology, Inc. and its contributors. 67 * Copyright (c) 2005, WHEEL Sp. z o.o. 68 * Copyright (c) 2004, 2005 Justin T. Gibbs 69 * All rights reserved. 70 * 71 * Redistribution and use in source and binary forms, with or without 72 * modification, are permitted provided that the following conditions are 73 * met: 74 * 1. Redistributions of source code must retain the above copyright 75 * notice, this list of conditions and the following disclaimer. 76 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 77 * substantially similar to the "NO WARRANTY" disclaimer below 78 * ("Disclaimer") and any redistribution must be conditioned upon including 79 * a substantially similar Disclaimer requirement for further binary 80 * redistribution. 81 * 3. Neither the names of the above listed copyright holders nor the names 82 * of any contributors may be used to endorse or promote products derived 83 * from this software without specific prior written permission. 84 * 85 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 86 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 87 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 88 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 89 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 90 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 91 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 92 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 93 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 94 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT 95 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 96 * 97 * $FreeBSD: head/sys/dev/mpt/mpt.c 241874 2012-10-22 10:42:59Z marius $ 98 */ 99 100 #include <dev/disk/mpt/mpt.h> 101 #include <dev/disk/mpt/mpt_cam.h> /* XXX For static handler registration */ 102 #include <dev/disk/mpt/mpt_raid.h> /* XXX For static handler registration */ 103 104 #include <dev/disk/mpt/mpilib/mpi.h> 105 #include <dev/disk/mpt/mpilib/mpi_ioc.h> 106 #include <dev/disk/mpt/mpilib/mpi_fc.h> 107 #include <dev/disk/mpt/mpilib/mpi_targ.h> 108 109 #include <sys/sysctl.h> 110 111 #define MPT_MAX_TRYS 3 112 #define MPT_MAX_WAIT 300000 113 114 static int maxwait_ack = 0; 115 static int maxwait_int = 0; 116 static int maxwait_state = 0; 117 118 static TAILQ_HEAD(, mpt_softc) mpt_tailq = TAILQ_HEAD_INITIALIZER(mpt_tailq); 119 mpt_reply_handler_t *mpt_reply_handlers[MPT_NUM_REPLY_HANDLERS]; 120 121 static mpt_reply_handler_t mpt_default_reply_handler; 122 static mpt_reply_handler_t mpt_config_reply_handler; 123 static mpt_reply_handler_t mpt_handshake_reply_handler; 124 static mpt_reply_handler_t mpt_event_reply_handler; 125 static void mpt_send_event_ack(struct mpt_softc *mpt, request_t *ack_req, 126 MSG_EVENT_NOTIFY_REPLY *msg, uint32_t context); 127 static int mpt_send_event_request(struct mpt_softc *mpt, int onoff); 128 static int mpt_soft_reset(struct mpt_softc *mpt); 129 static void mpt_hard_reset(struct mpt_softc *mpt); 130 static int mpt_dma_buf_alloc(struct mpt_softc *mpt); 131 static void mpt_dma_buf_free(struct mpt_softc *mpt); 132 static int mpt_configure_ioc(struct mpt_softc *mpt, int, int); 133 static int mpt_enable_ioc(struct mpt_softc *mpt, int); 134 135 /************************* Personality Module Support *************************/ 136 /* 137 * We include one extra entry that is guaranteed to be NULL 138 * to simplify our itterator. 139 */ 140 static struct mpt_personality *mpt_personalities[MPT_MAX_PERSONALITIES + 1]; 141 static __inline struct mpt_personality* 142 mpt_pers_find(struct mpt_softc *, u_int); 143 static __inline struct mpt_personality* 144 mpt_pers_find_reverse(struct mpt_softc *, u_int); 145 146 static __inline struct mpt_personality * 147 mpt_pers_find(struct mpt_softc *mpt, u_int start_at) 148 { 149 KASSERT(start_at <= MPT_MAX_PERSONALITIES, 150 ("mpt_pers_find: starting position out of range")); 151 152 while (start_at < MPT_MAX_PERSONALITIES 153 && (mpt->mpt_pers_mask & (0x1 << start_at)) == 0) { 154 start_at++; 155 } 156 return (mpt_personalities[start_at]); 157 } 158 159 /* 160 * Used infrequently, so no need to optimize like a forward 161 * traversal where we use the MAX+1 is guaranteed to be NULL 162 * trick. 163 */ 164 static __inline struct mpt_personality * 165 mpt_pers_find_reverse(struct mpt_softc *mpt, u_int start_at) 166 { 167 while (start_at < MPT_MAX_PERSONALITIES 168 && (mpt->mpt_pers_mask & (0x1 << start_at)) == 0) { 169 start_at--; 170 } 171 if (start_at < MPT_MAX_PERSONALITIES) 172 return (mpt_personalities[start_at]); 173 return (NULL); 174 } 175 176 #define MPT_PERS_FOREACH(mpt, pers) \ 177 for (pers = mpt_pers_find(mpt, /*start_at*/0); \ 178 pers != NULL; \ 179 pers = mpt_pers_find(mpt, /*start_at*/pers->id+1)) 180 181 #define MPT_PERS_FOREACH_REVERSE(mpt, pers) \ 182 for (pers = mpt_pers_find_reverse(mpt, MPT_MAX_PERSONALITIES-1);\ 183 pers != NULL; \ 184 pers = mpt_pers_find_reverse(mpt, /*start_at*/pers->id-1)) 185 186 static mpt_load_handler_t mpt_stdload; 187 static mpt_probe_handler_t mpt_stdprobe; 188 static mpt_attach_handler_t mpt_stdattach; 189 static mpt_enable_handler_t mpt_stdenable; 190 static mpt_ready_handler_t mpt_stdready; 191 static mpt_event_handler_t mpt_stdevent; 192 static mpt_reset_handler_t mpt_stdreset; 193 static mpt_shutdown_handler_t mpt_stdshutdown; 194 static mpt_detach_handler_t mpt_stddetach; 195 static mpt_unload_handler_t mpt_stdunload; 196 static struct mpt_personality mpt_default_personality = 197 { 198 .load = mpt_stdload, 199 .probe = mpt_stdprobe, 200 .attach = mpt_stdattach, 201 .enable = mpt_stdenable, 202 .ready = mpt_stdready, 203 .event = mpt_stdevent, 204 .reset = mpt_stdreset, 205 .shutdown = mpt_stdshutdown, 206 .detach = mpt_stddetach, 207 .unload = mpt_stdunload 208 }; 209 210 static mpt_load_handler_t mpt_core_load; 211 static mpt_attach_handler_t mpt_core_attach; 212 static mpt_enable_handler_t mpt_core_enable; 213 static mpt_reset_handler_t mpt_core_ioc_reset; 214 static mpt_event_handler_t mpt_core_event; 215 static mpt_shutdown_handler_t mpt_core_shutdown; 216 static mpt_shutdown_handler_t mpt_core_detach; 217 static mpt_unload_handler_t mpt_core_unload; 218 static struct mpt_personality mpt_core_personality = 219 { 220 .name = "mpt_core", 221 .load = mpt_core_load, 222 // .attach = mpt_core_attach, 223 // .enable = mpt_core_enable, 224 .event = mpt_core_event, 225 .reset = mpt_core_ioc_reset, 226 .shutdown = mpt_core_shutdown, 227 .detach = mpt_core_detach, 228 .unload = mpt_core_unload, 229 }; 230 231 /* 232 * Manual declaration so that DECLARE_MPT_PERSONALITY doesn't need 233 * ordering information. We want the core to always register FIRST. 234 * other modules are set to SI_ORDER_SECOND. 235 */ 236 static moduledata_t mpt_core_mod = { 237 "mpt_core", mpt_modevent, &mpt_core_personality 238 }; 239 DECLARE_MODULE(mpt_core, mpt_core_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); 240 MODULE_VERSION(mpt_core, 1); 241 242 #define MPT_PERS_ATTACHED(pers, mpt) ((mpt)->mpt_pers_mask & (0x1 << pers->id)) 243 244 int 245 mpt_modevent(module_t mod, int type, void *data) 246 { 247 struct mpt_personality *pers; 248 int error; 249 250 pers = (struct mpt_personality *)data; 251 252 error = 0; 253 switch (type) { 254 case MOD_LOAD: 255 { 256 mpt_load_handler_t **def_handler; 257 mpt_load_handler_t **pers_handler; 258 int i; 259 260 for (i = 0; i < MPT_MAX_PERSONALITIES; i++) { 261 if (mpt_personalities[i] == NULL) 262 break; 263 } 264 if (i >= MPT_MAX_PERSONALITIES) { 265 error = ENOMEM; 266 break; 267 } 268 pers->id = i; 269 mpt_personalities[i] = pers; 270 271 /* Install standard/noop handlers for any NULL entries. */ 272 def_handler = MPT_PERS_FIRST_HANDLER(&mpt_default_personality); 273 pers_handler = MPT_PERS_FIRST_HANDLER(pers); 274 while (pers_handler <= MPT_PERS_LAST_HANDLER(pers)) { 275 if (*pers_handler == NULL) 276 *pers_handler = *def_handler; 277 pers_handler++; 278 def_handler++; 279 } 280 281 error = (pers->load(pers)); 282 if (error != 0) 283 mpt_personalities[i] = NULL; 284 break; 285 } 286 case MOD_SHUTDOWN: 287 break; 288 case MOD_UNLOAD: 289 error = pers->unload(pers); 290 mpt_personalities[pers->id] = NULL; 291 break; 292 default: 293 error = EINVAL; 294 break; 295 } 296 return (error); 297 } 298 299 static int 300 mpt_stdload(struct mpt_personality *pers) 301 { 302 303 /* Load is always successful. */ 304 return (0); 305 } 306 307 static int 308 mpt_stdprobe(struct mpt_softc *mpt) 309 { 310 311 /* Probe is always successful. */ 312 return (0); 313 } 314 315 static int 316 mpt_stdattach(struct mpt_softc *mpt) 317 { 318 319 /* Attach is always successful. */ 320 return (0); 321 } 322 323 static int 324 mpt_stdenable(struct mpt_softc *mpt) 325 { 326 327 /* Enable is always successful. */ 328 return (0); 329 } 330 331 static void 332 mpt_stdready(struct mpt_softc *mpt) 333 { 334 335 } 336 337 static int 338 mpt_stdevent(struct mpt_softc *mpt, request_t *req, MSG_EVENT_NOTIFY_REPLY *msg) 339 { 340 341 mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_stdevent: 0x%x\n", msg->Event & 0xFF); 342 /* Event was not for us. */ 343 return (0); 344 } 345 346 static void 347 mpt_stdreset(struct mpt_softc *mpt, int type) 348 { 349 350 } 351 352 static void 353 mpt_stdshutdown(struct mpt_softc *mpt) 354 { 355 356 } 357 358 static void 359 mpt_stddetach(struct mpt_softc *mpt) 360 { 361 362 } 363 364 static int 365 mpt_stdunload(struct mpt_personality *pers) 366 { 367 368 /* Unload is always successful. */ 369 return (0); 370 } 371 372 /* 373 * Post driver attachment, we may want to perform some global actions. 374 * Here is the hook to do so. 375 */ 376 377 static void 378 mpt_postattach(void *unused) 379 { 380 struct mpt_softc *mpt; 381 struct mpt_personality *pers; 382 383 TAILQ_FOREACH(mpt, &mpt_tailq, links) { 384 MPT_PERS_FOREACH(mpt, pers) 385 pers->ready(mpt); 386 } 387 } 388 SYSINIT(mptdev, SI_SUB_CONFIGURE, SI_ORDER_MIDDLE, mpt_postattach, NULL); 389 390 /******************************* Bus DMA Support ******************************/ 391 void 392 mpt_map_rquest(void *arg, bus_dma_segment_t *segs, int nseg, int error) 393 { 394 struct mpt_map_info *map_info; 395 396 map_info = (struct mpt_map_info *)arg; 397 map_info->error = error; 398 map_info->phys = segs->ds_addr; 399 } 400 401 /**************************** Reply/Event Handling ****************************/ 402 int 403 mpt_register_handler(struct mpt_softc *mpt, mpt_handler_type type, 404 mpt_handler_t handler, uint32_t *phandler_id) 405 { 406 407 switch (type) { 408 case MPT_HANDLER_REPLY: 409 { 410 u_int cbi; 411 u_int free_cbi; 412 413 if (phandler_id == NULL) 414 return (EINVAL); 415 416 free_cbi = MPT_HANDLER_ID_NONE; 417 for (cbi = 0; cbi < MPT_NUM_REPLY_HANDLERS; cbi++) { 418 /* 419 * If the same handler is registered multiple 420 * times, don't error out. Just return the 421 * index of the original registration. 422 */ 423 if (mpt_reply_handlers[cbi] == handler.reply_handler) { 424 *phandler_id = MPT_CBI_TO_HID(cbi); 425 return (0); 426 } 427 428 /* 429 * Fill from the front in the hope that 430 * all registered handlers consume only a 431 * single cache line. 432 * 433 * We don't break on the first empty slot so 434 * that the full table is checked to see if 435 * this handler was previously registered. 436 */ 437 if (free_cbi == MPT_HANDLER_ID_NONE && 438 (mpt_reply_handlers[cbi] 439 == mpt_default_reply_handler)) 440 free_cbi = cbi; 441 } 442 if (free_cbi == MPT_HANDLER_ID_NONE) { 443 return (ENOMEM); 444 } 445 mpt_reply_handlers[free_cbi] = handler.reply_handler; 446 *phandler_id = MPT_CBI_TO_HID(free_cbi); 447 break; 448 } 449 default: 450 mpt_prt(mpt, "mpt_register_handler unknown type %d\n", type); 451 return (EINVAL); 452 } 453 return (0); 454 } 455 456 int 457 mpt_deregister_handler(struct mpt_softc *mpt, mpt_handler_type type, 458 mpt_handler_t handler, uint32_t handler_id) 459 { 460 461 switch (type) { 462 case MPT_HANDLER_REPLY: 463 { 464 u_int cbi; 465 466 cbi = MPT_CBI(handler_id); 467 if (cbi >= MPT_NUM_REPLY_HANDLERS 468 || mpt_reply_handlers[cbi] != handler.reply_handler) 469 return (ENOENT); 470 mpt_reply_handlers[cbi] = mpt_default_reply_handler; 471 break; 472 } 473 default: 474 mpt_prt(mpt, "mpt_deregister_handler unknown type %d\n", type); 475 return (EINVAL); 476 } 477 return (0); 478 } 479 480 static int 481 mpt_default_reply_handler(struct mpt_softc *mpt, request_t *req, 482 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 483 { 484 485 mpt_prt(mpt, 486 "Default Handler Called: req=%p:%u reply_descriptor=%x frame=%p\n", 487 req, req->serno, reply_desc, reply_frame); 488 489 if (reply_frame != NULL) 490 mpt_dump_reply_frame(mpt, reply_frame); 491 492 mpt_prt(mpt, "Reply Frame Ignored\n"); 493 494 return (/*free_reply*/TRUE); 495 } 496 497 static int 498 mpt_config_reply_handler(struct mpt_softc *mpt, request_t *req, 499 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 500 { 501 502 if (req != NULL) { 503 if (reply_frame != NULL) { 504 MSG_CONFIG *cfgp; 505 MSG_CONFIG_REPLY *reply; 506 507 cfgp = (MSG_CONFIG *)req->req_vbuf; 508 reply = (MSG_CONFIG_REPLY *)reply_frame; 509 req->IOCStatus = le16toh(reply_frame->IOCStatus); 510 bcopy(&reply->Header, &cfgp->Header, 511 sizeof(cfgp->Header)); 512 cfgp->ExtPageLength = reply->ExtPageLength; 513 cfgp->ExtPageType = reply->ExtPageType; 514 } 515 req->state &= ~REQ_STATE_QUEUED; 516 req->state |= REQ_STATE_DONE; 517 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 518 if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) { 519 wakeup(req); 520 } else if ((req->state & REQ_STATE_TIMEDOUT) != 0) { 521 /* 522 * Whew- we can free this request (late completion) 523 */ 524 mpt_free_request(mpt, req); 525 } 526 } 527 528 return (TRUE); 529 } 530 531 static int 532 mpt_handshake_reply_handler(struct mpt_softc *mpt, request_t *req, 533 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 534 { 535 536 /* Nothing to be done. */ 537 return (TRUE); 538 } 539 540 static int 541 mpt_event_reply_handler(struct mpt_softc *mpt, request_t *req, 542 uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) 543 { 544 int free_reply; 545 546 KASSERT(reply_frame != NULL, ("null reply in mpt_event_reply_handler")); 547 KASSERT(req != NULL, ("null request in mpt_event_reply_handler")); 548 549 free_reply = TRUE; 550 switch (reply_frame->Function) { 551 case MPI_FUNCTION_EVENT_NOTIFICATION: 552 { 553 MSG_EVENT_NOTIFY_REPLY *msg; 554 struct mpt_personality *pers; 555 u_int handled; 556 557 handled = 0; 558 msg = (MSG_EVENT_NOTIFY_REPLY *)reply_frame; 559 msg->EventDataLength = le16toh(msg->EventDataLength); 560 msg->IOCStatus = le16toh(msg->IOCStatus); 561 msg->IOCLogInfo = le32toh(msg->IOCLogInfo); 562 msg->Event = le32toh(msg->Event); 563 MPT_PERS_FOREACH(mpt, pers) 564 handled += pers->event(mpt, req, msg); 565 566 if (handled == 0 && mpt->mpt_pers_mask == 0) { 567 mpt_lprt(mpt, MPT_PRT_INFO, 568 "No Handlers For Any Event Notify Frames. " 569 "Event %#x (ACK %sequired).\n", 570 msg->Event, msg->AckRequired? "r" : "not r"); 571 } else if (handled == 0) { 572 mpt_lprt(mpt, 573 msg->AckRequired? MPT_PRT_WARN : MPT_PRT_INFO, 574 "Unhandled Event Notify Frame. Event %#x " 575 "(ACK %sequired).\n", 576 msg->Event, msg->AckRequired? "r" : "not r"); 577 } 578 579 if (msg->AckRequired) { 580 request_t *ack_req; 581 uint32_t context; 582 583 context = req->index | MPT_REPLY_HANDLER_EVENTS; 584 ack_req = mpt_get_request(mpt, FALSE); 585 if (ack_req == NULL) { 586 struct mpt_evtf_record *evtf; 587 588 evtf = (struct mpt_evtf_record *)reply_frame; 589 evtf->context = context; 590 LIST_INSERT_HEAD(&mpt->ack_frames, evtf, links); 591 free_reply = FALSE; 592 break; 593 } 594 mpt_send_event_ack(mpt, ack_req, msg, context); 595 /* 596 * Don't check for CONTINUATION_REPLY here 597 */ 598 return (free_reply); 599 } 600 break; 601 } 602 case MPI_FUNCTION_PORT_ENABLE: 603 mpt_lprt(mpt, MPT_PRT_DEBUG , "enable port reply\n"); 604 break; 605 case MPI_FUNCTION_EVENT_ACK: 606 break; 607 default: 608 mpt_prt(mpt, "unknown event function: %x\n", 609 reply_frame->Function); 610 break; 611 } 612 613 /* 614 * I'm not sure that this continuation stuff works as it should. 615 * 616 * I've had FC async events occur that free the frame up because 617 * the continuation bit isn't set, and then additional async events 618 * then occur using the same context. As you might imagine, this 619 * leads to Very Bad Thing. 620 * 621 * Let's just be safe for now and not free them up until we figure 622 * out what's actually happening here. 623 */ 624 #if 0 625 if ((reply_frame->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) == 0) { 626 TAILQ_REMOVE(&mpt->request_pending_list, req, links); 627 mpt_free_request(mpt, req); 628 mpt_prt(mpt, "event_reply %x for req %p:%u NOT a continuation", 629 reply_frame->Function, req, req->serno); 630 if (reply_frame->Function == MPI_FUNCTION_EVENT_NOTIFICATION) { 631 MSG_EVENT_NOTIFY_REPLY *msg = 632 (MSG_EVENT_NOTIFY_REPLY *)reply_frame; 633 mpt_prtc(mpt, " Event=0x%x AckReq=%d", 634 msg->Event, msg->AckRequired); 635 } 636 } else { 637 mpt_prt(mpt, "event_reply %x for %p:%u IS a continuation", 638 reply_frame->Function, req, req->serno); 639 if (reply_frame->Function == MPI_FUNCTION_EVENT_NOTIFICATION) { 640 MSG_EVENT_NOTIFY_REPLY *msg = 641 (MSG_EVENT_NOTIFY_REPLY *)reply_frame; 642 mpt_prtc(mpt, " Event=0x%x AckReq=%d", 643 msg->Event, msg->AckRequired); 644 } 645 mpt_prtc(mpt, "\n"); 646 } 647 #endif 648 return (free_reply); 649 } 650 651 /* 652 * Process an asynchronous event from the IOC. 653 */ 654 static int 655 mpt_core_event(struct mpt_softc *mpt, request_t *req, 656 MSG_EVENT_NOTIFY_REPLY *msg) 657 { 658 659 mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_core_event: 0x%x\n", 660 msg->Event & 0xFF); 661 switch(msg->Event & 0xFF) { 662 case MPI_EVENT_NONE: 663 break; 664 case MPI_EVENT_LOG_DATA: 665 { 666 int i; 667 668 /* Some error occurred that LSI wants logged */ 669 mpt_prt(mpt, "EvtLogData: IOCLogInfo: 0x%08x\n", 670 msg->IOCLogInfo); 671 mpt_prt(mpt, "\tEvtLogData: Event Data:"); 672 for (i = 0; i < msg->EventDataLength; i++) 673 mpt_prtc(mpt, " %08x", msg->Data[i]); 674 mpt_prtc(mpt, "\n"); 675 break; 676 } 677 case MPI_EVENT_EVENT_CHANGE: 678 /* 679 * This is just an acknowledgement 680 * of our mpt_send_event_request. 681 */ 682 break; 683 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 684 break; 685 default: 686 return (0); 687 break; 688 } 689 return (1); 690 } 691 692 static void 693 mpt_send_event_ack(struct mpt_softc *mpt, request_t *ack_req, 694 MSG_EVENT_NOTIFY_REPLY *msg, uint32_t context) 695 { 696 MSG_EVENT_ACK *ackp; 697 698 ackp = (MSG_EVENT_ACK *)ack_req->req_vbuf; 699 memset(ackp, 0, sizeof (*ackp)); 700 ackp->Function = MPI_FUNCTION_EVENT_ACK; 701 ackp->Event = htole32(msg->Event); 702 ackp->EventContext = htole32(msg->EventContext); 703 ackp->MsgContext = htole32(context); 704 mpt_check_doorbell(mpt); 705 mpt_send_cmd(mpt, ack_req); 706 } 707 708 /***************************** Interrupt Handling *****************************/ 709 void 710 mpt_intr(void *arg) 711 { 712 struct mpt_softc *mpt; 713 uint32_t reply_desc; 714 int ntrips = 0; 715 716 mpt = (struct mpt_softc *)arg; 717 mpt_lprt(mpt, MPT_PRT_DEBUG2, "enter mpt_intr\n"); 718 MPT_LOCK_ASSERT(mpt); 719 720 while ((reply_desc = mpt_pop_reply_queue(mpt)) != MPT_REPLY_EMPTY) { 721 request_t *req; 722 MSG_DEFAULT_REPLY *reply_frame; 723 uint32_t reply_baddr; 724 uint32_t ctxt_idx; 725 u_int cb_index; 726 u_int req_index; 727 u_int offset; 728 int free_rf; 729 730 req = NULL; 731 reply_frame = NULL; 732 reply_baddr = 0; 733 offset = 0; 734 if ((reply_desc & MPI_ADDRESS_REPLY_A_BIT) != 0) { 735 /* 736 * Ensure that the reply frame is coherent. 737 */ 738 reply_baddr = MPT_REPLY_BADDR(reply_desc); 739 offset = reply_baddr - (mpt->reply_phys & 0xFFFFFFFF); 740 bus_dmamap_sync_range(mpt->reply_dmat, 741 mpt->reply_dmap, offset, MPT_REPLY_SIZE, 742 BUS_DMASYNC_POSTREAD); 743 reply_frame = MPT_REPLY_OTOV(mpt, offset); 744 ctxt_idx = le32toh(reply_frame->MsgContext); 745 } else { 746 uint32_t type; 747 748 type = MPI_GET_CONTEXT_REPLY_TYPE(reply_desc); 749 ctxt_idx = reply_desc; 750 mpt_lprt(mpt, MPT_PRT_DEBUG1, "Context Reply: 0x%08x\n", 751 reply_desc); 752 753 switch (type) { 754 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: 755 ctxt_idx &= MPI_CONTEXT_REPLY_CONTEXT_MASK; 756 break; 757 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: 758 ctxt_idx = GET_IO_INDEX(reply_desc); 759 if (mpt->tgt_cmd_ptrs == NULL) { 760 mpt_prt(mpt, 761 "mpt_intr: no target cmd ptrs\n"); 762 reply_desc = MPT_REPLY_EMPTY; 763 break; 764 } 765 if (ctxt_idx >= mpt->tgt_cmds_allocated) { 766 mpt_prt(mpt, 767 "mpt_intr: bad tgt cmd ctxt %u\n", 768 ctxt_idx); 769 reply_desc = MPT_REPLY_EMPTY; 770 ntrips = 1000; 771 break; 772 } 773 req = mpt->tgt_cmd_ptrs[ctxt_idx]; 774 if (req == NULL) { 775 mpt_prt(mpt, "no request backpointer " 776 "at index %u", ctxt_idx); 777 reply_desc = MPT_REPLY_EMPTY; 778 ntrips = 1000; 779 break; 780 } 781 /* 782 * Reformulate ctxt_idx to be just as if 783 * it were another type of context reply 784 * so the code below will find the request 785 * via indexing into the pool. 786 */ 787 ctxt_idx = 788 req->index | mpt->scsi_tgt_handler_id; 789 req = NULL; 790 break; 791 case MPI_CONTEXT_REPLY_TYPE_LAN: 792 mpt_prt(mpt, "LAN CONTEXT REPLY: 0x%08x\n", 793 reply_desc); 794 reply_desc = MPT_REPLY_EMPTY; 795 break; 796 default: 797 mpt_prt(mpt, "Context Reply 0x%08x?\n", type); 798 reply_desc = MPT_REPLY_EMPTY; 799 break; 800 } 801 if (reply_desc == MPT_REPLY_EMPTY) { 802 if (ntrips++ > 1000) { 803 break; 804 } 805 continue; 806 } 807 } 808 809 cb_index = MPT_CONTEXT_TO_CBI(ctxt_idx); 810 req_index = MPT_CONTEXT_TO_REQI(ctxt_idx); 811 if (req_index < MPT_MAX_REQUESTS(mpt)) { 812 req = &mpt->request_pool[req_index]; 813 } else { 814 mpt_prt(mpt, "WARN: mpt_intr index == %d (reply_desc ==" 815 " 0x%x)\n", req_index, reply_desc); 816 } 817 818 bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap, 819 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 820 free_rf = mpt_reply_handlers[cb_index](mpt, req, 821 reply_desc, reply_frame); 822 823 if (reply_frame != NULL && free_rf) { 824 bus_dmamap_sync_range(mpt->reply_dmat, 825 mpt->reply_dmap, offset, MPT_REPLY_SIZE, 826 BUS_DMASYNC_PREREAD); 827 mpt_free_reply(mpt, reply_baddr); 828 } 829 830 /* 831 * If we got ourselves disabled, don't get stuck in a loop 832 */ 833 if (mpt->disabled) { 834 mpt_disable_ints(mpt); 835 break; 836 } 837 if (ntrips++ > 1000) { 838 break; 839 } 840 } 841 mpt_lprt(mpt, MPT_PRT_DEBUG2, "exit mpt_intr\n"); 842 } 843 844 /******************************* Error Recovery *******************************/ 845 void 846 mpt_complete_request_chain(struct mpt_softc *mpt, struct req_queue *chain, 847 u_int iocstatus) 848 { 849 MSG_DEFAULT_REPLY ioc_status_frame; 850 request_t *req; 851 852 memset(&ioc_status_frame, 0, sizeof(ioc_status_frame)); 853 ioc_status_frame.MsgLength = roundup2(sizeof(ioc_status_frame), 4); 854 ioc_status_frame.IOCStatus = iocstatus; 855 while((req = TAILQ_FIRST(chain)) != NULL) { 856 MSG_REQUEST_HEADER *msg_hdr; 857 u_int cb_index; 858 859 bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap, 860 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 861 msg_hdr = (MSG_REQUEST_HEADER *)req->req_vbuf; 862 ioc_status_frame.Function = msg_hdr->Function; 863 ioc_status_frame.MsgContext = msg_hdr->MsgContext; 864 cb_index = MPT_CONTEXT_TO_CBI(le32toh(msg_hdr->MsgContext)); 865 mpt_reply_handlers[cb_index](mpt, req, msg_hdr->MsgContext, 866 &ioc_status_frame); 867 if (mpt_req_on_pending_list(mpt, req) != 0) 868 TAILQ_REMOVE(chain, req, links); 869 } 870 } 871 872 /********************************* Diagnostics ********************************/ 873 /* 874 * Perform a diagnostic dump of a reply frame. 875 */ 876 void 877 mpt_dump_reply_frame(struct mpt_softc *mpt, MSG_DEFAULT_REPLY *reply_frame) 878 { 879 880 mpt_prt(mpt, "Address Reply:\n"); 881 mpt_print_reply(reply_frame); 882 } 883 884 /******************************* Doorbell Access ******************************/ 885 static __inline uint32_t mpt_rd_db(struct mpt_softc *mpt); 886 static __inline uint32_t mpt_rd_intr(struct mpt_softc *mpt); 887 888 static __inline uint32_t 889 mpt_rd_db(struct mpt_softc *mpt) 890 { 891 892 return mpt_read(mpt, MPT_OFFSET_DOORBELL); 893 } 894 895 static __inline uint32_t 896 mpt_rd_intr(struct mpt_softc *mpt) 897 { 898 899 return mpt_read(mpt, MPT_OFFSET_INTR_STATUS); 900 } 901 902 /* Busy wait for a door bell to be read by IOC */ 903 static int 904 mpt_wait_db_ack(struct mpt_softc *mpt) 905 { 906 int i; 907 908 for (i=0; i < MPT_MAX_WAIT; i++) { 909 if (!MPT_DB_IS_BUSY(mpt_rd_intr(mpt))) { 910 maxwait_ack = i > maxwait_ack ? i : maxwait_ack; 911 return (MPT_OK); 912 } 913 DELAY(200); 914 } 915 return (MPT_FAIL); 916 } 917 918 /* Busy wait for a door bell interrupt */ 919 static int 920 mpt_wait_db_int(struct mpt_softc *mpt) 921 { 922 int i; 923 924 for (i = 0; i < MPT_MAX_WAIT; i++) { 925 if (MPT_DB_INTR(mpt_rd_intr(mpt))) { 926 maxwait_int = i > maxwait_int ? i : maxwait_int; 927 return MPT_OK; 928 } 929 DELAY(100); 930 } 931 return (MPT_FAIL); 932 } 933 934 /* Wait for IOC to transition to a give state */ 935 void 936 mpt_check_doorbell(struct mpt_softc *mpt) 937 { 938 uint32_t db = mpt_rd_db(mpt); 939 940 if (MPT_STATE(db) != MPT_DB_STATE_RUNNING) { 941 mpt_prt(mpt, "Device not running\n"); 942 mpt_print_db(db); 943 } 944 } 945 946 /* Wait for IOC to transition to a give state */ 947 static int 948 mpt_wait_state(struct mpt_softc *mpt, enum DB_STATE_BITS state) 949 { 950 int i; 951 952 for (i = 0; i < MPT_MAX_WAIT; i++) { 953 uint32_t db = mpt_rd_db(mpt); 954 if (MPT_STATE(db) == state) { 955 maxwait_state = i > maxwait_state ? i : maxwait_state; 956 return (MPT_OK); 957 } 958 DELAY(100); 959 } 960 return (MPT_FAIL); 961 } 962 963 964 /************************* Intialization/Configuration ************************/ 965 static int mpt_download_fw(struct mpt_softc *mpt); 966 967 /* Issue the reset COMMAND to the IOC */ 968 static int 969 mpt_soft_reset(struct mpt_softc *mpt) 970 { 971 972 mpt_lprt(mpt, MPT_PRT_DEBUG, "soft reset\n"); 973 974 /* Have to use hard reset if we are not in Running state */ 975 if (MPT_STATE(mpt_rd_db(mpt)) != MPT_DB_STATE_RUNNING) { 976 mpt_prt(mpt, "soft reset failed: device not running\n"); 977 return (MPT_FAIL); 978 } 979 980 /* If door bell is in use we don't have a chance of getting 981 * a word in since the IOC probably crashed in message 982 * processing. So don't waste our time. 983 */ 984 if (MPT_DB_IS_IN_USE(mpt_rd_db(mpt))) { 985 mpt_prt(mpt, "soft reset failed: doorbell wedged\n"); 986 return (MPT_FAIL); 987 } 988 989 /* Send the reset request to the IOC */ 990 mpt_write(mpt, MPT_OFFSET_DOORBELL, 991 MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET << MPI_DOORBELL_FUNCTION_SHIFT); 992 if (mpt_wait_db_ack(mpt) != MPT_OK) { 993 mpt_prt(mpt, "soft reset failed: ack timeout\n"); 994 return (MPT_FAIL); 995 } 996 997 /* Wait for the IOC to reload and come out of reset state */ 998 if (mpt_wait_state(mpt, MPT_DB_STATE_READY) != MPT_OK) { 999 mpt_prt(mpt, "soft reset failed: device did not restart\n"); 1000 return (MPT_FAIL); 1001 } 1002 1003 return MPT_OK; 1004 } 1005 1006 static int 1007 mpt_enable_diag_mode(struct mpt_softc *mpt) 1008 { 1009 int try; 1010 1011 try = 20; 1012 while (--try) { 1013 1014 if ((mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC) & MPI_DIAG_DRWE) != 0) 1015 break; 1016 1017 /* Enable diagnostic registers */ 1018 mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF); 1019 mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_1ST_KEY_VALUE); 1020 mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_2ND_KEY_VALUE); 1021 mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_3RD_KEY_VALUE); 1022 mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_4TH_KEY_VALUE); 1023 mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPI_WRSEQ_5TH_KEY_VALUE); 1024 1025 DELAY(100000); 1026 } 1027 if (try == 0) 1028 return (EIO); 1029 return (0); 1030 } 1031 1032 static void 1033 mpt_disable_diag_mode(struct mpt_softc *mpt) 1034 { 1035 1036 mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFFFFFFFF); 1037 } 1038 1039 /* This is a magic diagnostic reset that resets all the ARM 1040 * processors in the chip. 1041 */ 1042 static void 1043 mpt_hard_reset(struct mpt_softc *mpt) 1044 { 1045 int error; 1046 int wait; 1047 uint32_t diagreg; 1048 1049 mpt_lprt(mpt, MPT_PRT_DEBUG, "hard reset\n"); 1050 1051 if (mpt->is_1078) { 1052 mpt_write(mpt, MPT_OFFSET_RESET_1078, 0x07); 1053 DELAY(1000); 1054 return; 1055 } 1056 1057 error = mpt_enable_diag_mode(mpt); 1058 if (error) { 1059 mpt_prt(mpt, "WARNING - Could not enter diagnostic mode !\n"); 1060 mpt_prt(mpt, "Trying to reset anyway.\n"); 1061 } 1062 1063 diagreg = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); 1064 1065 /* 1066 * This appears to be a workaround required for some 1067 * firmware or hardware revs. 1068 */ 1069 mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diagreg | MPI_DIAG_DISABLE_ARM); 1070 DELAY(1000); 1071 1072 /* Diag. port is now active so we can now hit the reset bit */ 1073 mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diagreg | MPI_DIAG_RESET_ADAPTER); 1074 1075 /* 1076 * Ensure that the reset has finished. We delay 1ms 1077 * prior to reading the register to make sure the chip 1078 * has sufficiently completed its reset to handle register 1079 * accesses. 1080 */ 1081 wait = 5000; 1082 do { 1083 DELAY(1000); 1084 diagreg = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); 1085 } while (--wait && (diagreg & MPI_DIAG_RESET_ADAPTER) == 0); 1086 1087 if (wait == 0) { 1088 mpt_prt(mpt, "WARNING - Failed hard reset! " 1089 "Trying to initialize anyway.\n"); 1090 } 1091 1092 /* 1093 * If we have firmware to download, it must be loaded before 1094 * the controller will become operational. Do so now. 1095 */ 1096 if (mpt->fw_image != NULL) { 1097 1098 error = mpt_download_fw(mpt); 1099 1100 if (error) { 1101 mpt_prt(mpt, "WARNING - Firmware Download Failed!\n"); 1102 mpt_prt(mpt, "Trying to initialize anyway.\n"); 1103 } 1104 } 1105 1106 /* 1107 * Reseting the controller should have disabled write 1108 * access to the diagnostic registers, but disable 1109 * manually to be sure. 1110 */ 1111 mpt_disable_diag_mode(mpt); 1112 } 1113 1114 static void 1115 mpt_core_ioc_reset(struct mpt_softc *mpt, int type) 1116 { 1117 1118 /* 1119 * Complete all pending requests with a status 1120 * appropriate for an IOC reset. 1121 */ 1122 mpt_complete_request_chain(mpt, &mpt->request_pending_list, 1123 MPI_IOCSTATUS_INVALID_STATE); 1124 } 1125 1126 /* 1127 * Reset the IOC when needed. Try software command first then if needed 1128 * poke at the magic diagnostic reset. Note that a hard reset resets 1129 * *both* IOCs on dual function chips (FC929 && LSI1030) as well as 1130 * fouls up the PCI configuration registers. 1131 */ 1132 int 1133 mpt_reset(struct mpt_softc *mpt, int reinit) 1134 { 1135 struct mpt_personality *pers; 1136 int ret; 1137 int retry_cnt = 0; 1138 1139 /* 1140 * Try a soft reset. If that fails, get out the big hammer. 1141 */ 1142 again: 1143 if ((ret = mpt_soft_reset(mpt)) != MPT_OK) { 1144 int cnt; 1145 for (cnt = 0; cnt < 5; cnt++) { 1146 /* Failed; do a hard reset */ 1147 mpt_hard_reset(mpt); 1148 1149 /* 1150 * Wait for the IOC to reload 1151 * and come out of reset state 1152 */ 1153 ret = mpt_wait_state(mpt, MPT_DB_STATE_READY); 1154 if (ret == MPT_OK) { 1155 break; 1156 } 1157 /* 1158 * Okay- try to check again... 1159 */ 1160 ret = mpt_wait_state(mpt, MPT_DB_STATE_READY); 1161 if (ret == MPT_OK) { 1162 break; 1163 } 1164 mpt_prt(mpt, "mpt_reset: failed hard reset (%d:%d)\n", 1165 retry_cnt, cnt); 1166 } 1167 } 1168 1169 if (retry_cnt == 0) { 1170 /* 1171 * Invoke reset handlers. We bump the reset count so 1172 * that mpt_wait_req() understands that regardless of 1173 * the specified wait condition, it should stop its wait. 1174 */ 1175 mpt->reset_cnt++; 1176 MPT_PERS_FOREACH(mpt, pers) 1177 pers->reset(mpt, ret); 1178 } 1179 1180 if (reinit) { 1181 ret = mpt_enable_ioc(mpt, 1); 1182 if (ret == MPT_OK) { 1183 mpt_enable_ints(mpt); 1184 } 1185 } 1186 if (ret != MPT_OK && retry_cnt++ < 2) { 1187 goto again; 1188 } 1189 return ret; 1190 } 1191 1192 /* Return a command buffer to the free queue */ 1193 void 1194 mpt_free_request(struct mpt_softc *mpt, request_t *req) 1195 { 1196 request_t *nxt; 1197 struct mpt_evtf_record *record; 1198 uint32_t offset, reply_baddr; 1199 1200 if (req == NULL || req != &mpt->request_pool[req->index]) { 1201 panic("mpt_free_request: bad req ptr"); 1202 } 1203 if ((nxt = req->chain) != NULL) { 1204 req->chain = NULL; 1205 mpt_free_request(mpt, nxt); /* NB: recursion */ 1206 } 1207 KASSERT(req->state != REQ_STATE_FREE, ("freeing free request")); 1208 KASSERT(!(req->state & REQ_STATE_LOCKED), ("freeing locked request")); 1209 MPT_LOCK_ASSERT(mpt); 1210 KASSERT(mpt_req_on_free_list(mpt, req) == 0, 1211 ("mpt_free_request: req %p:%u func %x already on freelist", 1212 req, req->serno, ((MSG_REQUEST_HEADER *)req->req_vbuf)->Function)); 1213 KASSERT(mpt_req_on_pending_list(mpt, req) == 0, 1214 ("mpt_free_request: req %p:%u func %x on pending list", 1215 req, req->serno, ((MSG_REQUEST_HEADER *)req->req_vbuf)->Function)); 1216 #ifdef INVARIANTS 1217 mpt_req_not_spcl(mpt, req, "mpt_free_request", __LINE__); 1218 #endif 1219 1220 req->ccb = NULL; 1221 if (LIST_EMPTY(&mpt->ack_frames)) { 1222 /* 1223 * Insert free ones at the tail 1224 */ 1225 req->serno = 0; 1226 req->state = REQ_STATE_FREE; 1227 #ifdef INVARIANTS 1228 memset(req->req_vbuf, 0xff, sizeof (MSG_REQUEST_HEADER)); 1229 #endif 1230 TAILQ_INSERT_TAIL(&mpt->request_free_list, req, links); 1231 if (mpt->getreqwaiter != 0) { 1232 mpt->getreqwaiter = 0; 1233 wakeup(&mpt->request_free_list); 1234 } 1235 return; 1236 } 1237 1238 /* 1239 * Process an ack frame deferred due to resource shortage. 1240 */ 1241 record = LIST_FIRST(&mpt->ack_frames); 1242 LIST_REMOVE(record, links); 1243 req->state = REQ_STATE_ALLOCATED; 1244 mpt_assign_serno(mpt, req); 1245 mpt_send_event_ack(mpt, req, &record->reply, record->context); 1246 offset = (uint32_t)((uint8_t *)record - mpt->reply); 1247 reply_baddr = offset + (mpt->reply_phys & 0xFFFFFFFF); 1248 bus_dmamap_sync_range(mpt->reply_dmat, mpt->reply_dmap, offset, 1249 MPT_REPLY_SIZE, BUS_DMASYNC_PREREAD); 1250 mpt_free_reply(mpt, reply_baddr); 1251 } 1252 1253 /* Get a command buffer from the free queue */ 1254 request_t * 1255 mpt_get_request(struct mpt_softc *mpt, int sleep_ok) 1256 { 1257 request_t *req; 1258 1259 retry: 1260 MPT_LOCK_ASSERT(mpt); 1261 req = TAILQ_FIRST(&mpt->request_free_list); 1262 if (req != NULL) { 1263 KASSERT(req == &mpt->request_pool[req->index], 1264 ("mpt_get_request: corrupted request free list")); 1265 KASSERT(req->state == REQ_STATE_FREE, 1266 ("req %p:%u not free on free list %x index %d function %x", 1267 req, req->serno, req->state, req->index, 1268 ((MSG_REQUEST_HEADER *)req->req_vbuf)->Function)); 1269 TAILQ_REMOVE(&mpt->request_free_list, req, links); 1270 req->state = REQ_STATE_ALLOCATED; 1271 req->chain = NULL; 1272 mpt_assign_serno(mpt, req); 1273 } else if (sleep_ok != 0) { 1274 mpt->getreqwaiter = 1; 1275 mpt_sleep(mpt, &mpt->request_free_list, 0, "mptgreq", 0); 1276 goto retry; 1277 } 1278 return (req); 1279 } 1280 1281 /* Pass the command to the IOC */ 1282 void 1283 mpt_send_cmd(struct mpt_softc *mpt, request_t *req) 1284 { 1285 1286 if (mpt->verbose > MPT_PRT_DEBUG2) { 1287 mpt_dump_request(mpt, req); 1288 } 1289 bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap, 1290 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1291 req->state |= REQ_STATE_QUEUED; 1292 KASSERT(mpt_req_on_free_list(mpt, req) == 0, 1293 ("req %p:%u func %x on freelist list in mpt_send_cmd", 1294 req, req->serno, ((MSG_REQUEST_HEADER *)req->req_vbuf)->Function)); 1295 KASSERT(mpt_req_on_pending_list(mpt, req) == 0, 1296 ("req %p:%u func %x already on pending list in mpt_send_cmd", 1297 req, req->serno, ((MSG_REQUEST_HEADER *)req->req_vbuf)->Function)); 1298 TAILQ_INSERT_HEAD(&mpt->request_pending_list, req, links); 1299 mpt_write(mpt, MPT_OFFSET_REQUEST_Q, (uint32_t) req->req_pbuf); 1300 } 1301 1302 /* 1303 * Wait for a request to complete. 1304 * 1305 * Inputs: 1306 * mpt softc of controller executing request 1307 * req request to wait for 1308 * sleep_ok nonzero implies may sleep in this context 1309 * time_ms timeout in ms. 0 implies no timeout. 1310 * 1311 * Return Values: 1312 * 0 Request completed 1313 * non-0 Timeout fired before request completion. 1314 */ 1315 int 1316 mpt_wait_req(struct mpt_softc *mpt, request_t *req, 1317 mpt_req_state_t state, mpt_req_state_t mask, 1318 int sleep_ok, int time_ms) 1319 { 1320 int error; 1321 int timeout; 1322 u_int saved_cnt; 1323 1324 /* 1325 * timeout is in ms. 0 indicates infinite wait. 1326 * Convert to ticks or 500us units depending on 1327 * our sleep mode. 1328 */ 1329 if (sleep_ok != 0) { 1330 timeout = (time_ms * hz) / 1000; 1331 } else { 1332 timeout = time_ms * 2; 1333 } 1334 req->state |= REQ_STATE_NEED_WAKEUP; 1335 mask &= ~REQ_STATE_NEED_WAKEUP; 1336 saved_cnt = mpt->reset_cnt; 1337 while ((req->state & mask) != state && mpt->reset_cnt == saved_cnt) { 1338 if (sleep_ok != 0) { 1339 error = mpt_sleep(mpt, req, 0, "mptreq", timeout); 1340 if (error == EWOULDBLOCK) { 1341 timeout = 0; 1342 break; 1343 } 1344 } else { 1345 if (time_ms != 0 && --timeout == 0) { 1346 break; 1347 } 1348 DELAY(500); 1349 mpt_intr(mpt); 1350 } 1351 } 1352 req->state &= ~REQ_STATE_NEED_WAKEUP; 1353 if (mpt->reset_cnt != saved_cnt) { 1354 return (EIO); 1355 } 1356 if (time_ms && timeout <= 0) { 1357 MSG_REQUEST_HEADER *msg_hdr = req->req_vbuf; 1358 req->state |= REQ_STATE_TIMEDOUT; 1359 mpt_prt(mpt, "mpt_wait_req(%x) timed out\n", msg_hdr->Function); 1360 return (ETIMEDOUT); 1361 } 1362 return (0); 1363 } 1364 1365 /* 1366 * Send a command to the IOC via the handshake register. 1367 * 1368 * Only done at initialization time and for certain unusual 1369 * commands such as device/bus reset as specified by LSI. 1370 */ 1371 int 1372 mpt_send_handshake_cmd(struct mpt_softc *mpt, size_t len, void *cmd) 1373 { 1374 int i; 1375 uint32_t data, *data32; 1376 1377 /* Check condition of the IOC */ 1378 data = mpt_rd_db(mpt); 1379 if ((MPT_STATE(data) != MPT_DB_STATE_READY 1380 && MPT_STATE(data) != MPT_DB_STATE_RUNNING 1381 && MPT_STATE(data) != MPT_DB_STATE_FAULT) 1382 || MPT_DB_IS_IN_USE(data)) { 1383 mpt_prt(mpt, "handshake aborted - invalid doorbell state\n"); 1384 mpt_print_db(data); 1385 return (EBUSY); 1386 } 1387 1388 /* We move things in 32 bit chunks */ 1389 len = (len + 3) >> 2; 1390 data32 = cmd; 1391 1392 /* Clear any left over pending doorbell interrupts */ 1393 if (MPT_DB_INTR(mpt_rd_intr(mpt))) 1394 mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); 1395 1396 /* 1397 * Tell the handshake reg. we are going to send a command 1398 * and how long it is going to be. 1399 */ 1400 data = (MPI_FUNCTION_HANDSHAKE << MPI_DOORBELL_FUNCTION_SHIFT) | 1401 (len << MPI_DOORBELL_ADD_DWORDS_SHIFT); 1402 mpt_write(mpt, MPT_OFFSET_DOORBELL, data); 1403 1404 /* Wait for the chip to notice */ 1405 if (mpt_wait_db_int(mpt) != MPT_OK) { 1406 mpt_prt(mpt, "mpt_send_handshake_cmd: db ignored\n"); 1407 return (ETIMEDOUT); 1408 } 1409 1410 /* Clear the interrupt */ 1411 mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); 1412 1413 if (mpt_wait_db_ack(mpt) != MPT_OK) { 1414 mpt_prt(mpt, "mpt_send_handshake_cmd: db ack timed out\n"); 1415 return (ETIMEDOUT); 1416 } 1417 1418 /* Send the command */ 1419 for (i = 0; i < len; i++) { 1420 mpt_write(mpt, MPT_OFFSET_DOORBELL, htole32(*data32++)); 1421 if (mpt_wait_db_ack(mpt) != MPT_OK) { 1422 mpt_prt(mpt, 1423 "mpt_send_handshake_cmd: timeout @ index %d\n", i); 1424 return (ETIMEDOUT); 1425 } 1426 } 1427 return MPT_OK; 1428 } 1429 1430 /* Get the response from the handshake register */ 1431 int 1432 mpt_recv_handshake_reply(struct mpt_softc *mpt, size_t reply_len, void *reply) 1433 { 1434 int left, reply_left; 1435 u_int16_t *data16; 1436 uint32_t data; 1437 MSG_DEFAULT_REPLY *hdr; 1438 1439 /* We move things out in 16 bit chunks */ 1440 reply_len >>= 1; 1441 data16 = (u_int16_t *)reply; 1442 1443 hdr = (MSG_DEFAULT_REPLY *)reply; 1444 1445 /* Get first word */ 1446 if (mpt_wait_db_int(mpt) != MPT_OK) { 1447 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout1\n"); 1448 return ETIMEDOUT; 1449 } 1450 data = mpt_read(mpt, MPT_OFFSET_DOORBELL); 1451 *data16++ = le16toh(data & MPT_DB_DATA_MASK); 1452 mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); 1453 1454 /* Get Second Word */ 1455 if (mpt_wait_db_int(mpt) != MPT_OK) { 1456 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout2\n"); 1457 return ETIMEDOUT; 1458 } 1459 data = mpt_read(mpt, MPT_OFFSET_DOORBELL); 1460 *data16++ = le16toh(data & MPT_DB_DATA_MASK); 1461 mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); 1462 1463 /* 1464 * With the second word, we can now look at the length. 1465 * Warn about a reply that's too short (except for IOC FACTS REPLY) 1466 */ 1467 if ((reply_len >> 1) != hdr->MsgLength && 1468 (hdr->Function != MPI_FUNCTION_IOC_FACTS)){ 1469 mpt_prt(mpt, "reply length does not match message length: " 1470 "got %x; expected %zx for function %x\n", 1471 hdr->MsgLength << 2, reply_len << 1, hdr->Function); 1472 } 1473 1474 /* Get rest of the reply; but don't overflow the provided buffer */ 1475 left = (hdr->MsgLength << 1) - 2; 1476 reply_left = reply_len - 2; 1477 while (left--) { 1478 u_int16_t datum; 1479 1480 if (mpt_wait_db_int(mpt) != MPT_OK) { 1481 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout3\n"); 1482 return ETIMEDOUT; 1483 } 1484 data = mpt_read(mpt, MPT_OFFSET_DOORBELL); 1485 datum = le16toh(data & MPT_DB_DATA_MASK); 1486 1487 if (reply_left-- > 0) 1488 *data16++ = datum; 1489 1490 mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); 1491 } 1492 1493 /* One more wait & clear at the end */ 1494 if (mpt_wait_db_int(mpt) != MPT_OK) { 1495 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout4\n"); 1496 return ETIMEDOUT; 1497 } 1498 mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); 1499 1500 if ((hdr->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 1501 if (mpt->verbose >= MPT_PRT_TRACE) 1502 mpt_print_reply(hdr); 1503 return (MPT_FAIL | hdr->IOCStatus); 1504 } 1505 1506 return (0); 1507 } 1508 1509 static int 1510 mpt_get_iocfacts(struct mpt_softc *mpt, MSG_IOC_FACTS_REPLY *freplp) 1511 { 1512 MSG_IOC_FACTS f_req; 1513 int error; 1514 1515 memset(&f_req, 0, sizeof f_req); 1516 f_req.Function = MPI_FUNCTION_IOC_FACTS; 1517 f_req.MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE); 1518 error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req); 1519 if (error) { 1520 return(error); 1521 } 1522 error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp); 1523 return (error); 1524 } 1525 1526 static int 1527 mpt_get_portfacts(struct mpt_softc *mpt, U8 port, MSG_PORT_FACTS_REPLY *freplp) 1528 { 1529 MSG_PORT_FACTS f_req; 1530 int error; 1531 1532 memset(&f_req, 0, sizeof f_req); 1533 f_req.Function = MPI_FUNCTION_PORT_FACTS; 1534 f_req.PortNumber = port; 1535 f_req.MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE); 1536 error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req); 1537 if (error) { 1538 return(error); 1539 } 1540 error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp); 1541 return (error); 1542 } 1543 1544 /* 1545 * Send the initialization request. This is where we specify how many 1546 * SCSI busses and how many devices per bus we wish to emulate. 1547 * This is also the command that specifies the max size of the reply 1548 * frames from the IOC that we will be allocating. 1549 */ 1550 static int 1551 mpt_send_ioc_init(struct mpt_softc *mpt, uint32_t who) 1552 { 1553 int error = 0; 1554 MSG_IOC_INIT init; 1555 MSG_IOC_INIT_REPLY reply; 1556 1557 memset(&init, 0, sizeof init); 1558 init.WhoInit = who; 1559 init.Function = MPI_FUNCTION_IOC_INIT; 1560 init.MaxDevices = 0; /* at least 256 devices per bus */ 1561 init.MaxBuses = 16; /* at least 16 busses */ 1562 1563 init.MsgVersion = htole16(MPI_VERSION); 1564 init.HeaderVersion = htole16(MPI_HEADER_VERSION); 1565 init.ReplyFrameSize = htole16(MPT_REPLY_SIZE); 1566 init.MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE); 1567 1568 if ((error = mpt_send_handshake_cmd(mpt, sizeof init, &init)) != 0) { 1569 return(error); 1570 } 1571 1572 error = mpt_recv_handshake_reply(mpt, sizeof reply, &reply); 1573 return (error); 1574 } 1575 1576 1577 /* 1578 * Utiltity routine to read configuration headers and pages 1579 */ 1580 int 1581 mpt_issue_cfg_req(struct mpt_softc *mpt, request_t *req, cfgparms_t *params, 1582 bus_addr_t addr, bus_size_t len, int sleep_ok, int timeout_ms) 1583 { 1584 MSG_CONFIG *cfgp; 1585 SGE_SIMPLE32 *se; 1586 1587 cfgp = req->req_vbuf; 1588 memset(cfgp, 0, sizeof *cfgp); 1589 cfgp->Action = params->Action; 1590 cfgp->Function = MPI_FUNCTION_CONFIG; 1591 cfgp->Header.PageVersion = params->PageVersion; 1592 cfgp->Header.PageNumber = params->PageNumber; 1593 cfgp->PageAddress = htole32(params->PageAddress); 1594 if ((params->PageType & MPI_CONFIG_PAGETYPE_MASK) == 1595 MPI_CONFIG_PAGETYPE_EXTENDED) { 1596 cfgp->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 1597 cfgp->Header.PageLength = 0; 1598 cfgp->ExtPageLength = htole16(params->ExtPageLength); 1599 cfgp->ExtPageType = params->ExtPageType; 1600 } else { 1601 cfgp->Header.PageType = params->PageType; 1602 cfgp->Header.PageLength = params->PageLength; 1603 } 1604 se = (SGE_SIMPLE32 *)&cfgp->PageBufferSGE; 1605 se->Address = htole32(addr); 1606 MPI_pSGE_SET_LENGTH(se, len); 1607 MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT | 1608 MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | 1609 MPI_SGE_FLAGS_END_OF_LIST | 1610 ((params->Action == MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT 1611 || params->Action == MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM) 1612 ? MPI_SGE_FLAGS_HOST_TO_IOC : MPI_SGE_FLAGS_IOC_TO_HOST))); 1613 se->FlagsLength = htole32(se->FlagsLength); 1614 cfgp->MsgContext = htole32(req->index | MPT_REPLY_HANDLER_CONFIG); 1615 1616 mpt_check_doorbell(mpt); 1617 mpt_send_cmd(mpt, req); 1618 return (mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE, 1619 sleep_ok, timeout_ms)); 1620 } 1621 1622 int 1623 mpt_read_extcfg_header(struct mpt_softc *mpt, int PageVersion, int PageNumber, 1624 uint32_t PageAddress, int ExtPageType, 1625 CONFIG_EXTENDED_PAGE_HEADER *rslt, 1626 int sleep_ok, int timeout_ms) 1627 { 1628 request_t *req; 1629 cfgparms_t params; 1630 MSG_CONFIG_REPLY *cfgp; 1631 int error; 1632 1633 req = mpt_get_request(mpt, sleep_ok); 1634 if (req == NULL) { 1635 mpt_prt(mpt, "mpt_extread_cfg_header: Get request failed!\n"); 1636 return (ENOMEM); 1637 } 1638 1639 bzero(¶ms, sizeof(params)); 1640 params.Action = MPI_CONFIG_ACTION_PAGE_HEADER; 1641 params.PageVersion = PageVersion; 1642 params.PageLength = 0; 1643 params.PageNumber = PageNumber; 1644 params.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 1645 params.PageAddress = PageAddress; 1646 params.ExtPageType = ExtPageType; 1647 params.ExtPageLength = 0; 1648 error = mpt_issue_cfg_req(mpt, req, ¶ms, /*addr*/0, /*len*/0, 1649 sleep_ok, timeout_ms); 1650 if (error != 0) { 1651 /* 1652 * Leave the request. Without resetting the chip, it's 1653 * still owned by it and we'll just get into trouble 1654 * freeing it now. Mark it as abandoned so that if it 1655 * shows up later it can be freed. 1656 */ 1657 mpt_prt(mpt, "read_extcfg_header timed out\n"); 1658 return (ETIMEDOUT); 1659 } 1660 1661 switch (req->IOCStatus & MPI_IOCSTATUS_MASK) { 1662 case MPI_IOCSTATUS_SUCCESS: 1663 cfgp = req->req_vbuf; 1664 rslt->PageVersion = cfgp->Header.PageVersion; 1665 rslt->PageNumber = cfgp->Header.PageNumber; 1666 rslt->PageType = cfgp->Header.PageType; 1667 rslt->ExtPageLength = le16toh(cfgp->ExtPageLength); 1668 rslt->ExtPageType = cfgp->ExtPageType; 1669 error = 0; 1670 break; 1671 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: 1672 mpt_lprt(mpt, MPT_PRT_DEBUG, 1673 "Invalid Page Type %d Number %d Addr 0x%0x\n", 1674 MPI_CONFIG_PAGETYPE_EXTENDED, PageNumber, PageAddress); 1675 error = EINVAL; 1676 break; 1677 default: 1678 mpt_prt(mpt, "mpt_read_extcfg_header: Config Info Status %x\n", 1679 req->IOCStatus); 1680 error = EIO; 1681 break; 1682 } 1683 mpt_free_request(mpt, req); 1684 return (error); 1685 } 1686 1687 int 1688 mpt_read_extcfg_page(struct mpt_softc *mpt, int Action, uint32_t PageAddress, 1689 CONFIG_EXTENDED_PAGE_HEADER *hdr, void *buf, size_t len, 1690 int sleep_ok, int timeout_ms) 1691 { 1692 request_t *req; 1693 cfgparms_t params; 1694 int error; 1695 1696 req = mpt_get_request(mpt, sleep_ok); 1697 if (req == NULL) { 1698 mpt_prt(mpt, "mpt_read_extcfg_page: Get request failed!\n"); 1699 return (-1); 1700 } 1701 1702 params.Action = Action; 1703 params.PageVersion = hdr->PageVersion; 1704 params.PageLength = 0; 1705 params.PageNumber = hdr->PageNumber; 1706 params.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 1707 params.PageAddress = PageAddress; 1708 params.ExtPageType = hdr->ExtPageType; 1709 params.ExtPageLength = hdr->ExtPageLength; 1710 error = mpt_issue_cfg_req(mpt, req, ¶ms, 1711 req->req_pbuf + MPT_RQSL(mpt), 1712 len, sleep_ok, timeout_ms); 1713 if (error != 0) { 1714 mpt_prt(mpt, "read_extcfg_page(%d) timed out\n", Action); 1715 return (-1); 1716 } 1717 1718 if ((req->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 1719 mpt_prt(mpt, "mpt_read_extcfg_page: Config Info Status %x\n", 1720 req->IOCStatus); 1721 mpt_free_request(mpt, req); 1722 return (-1); 1723 } 1724 memcpy(buf, ((uint8_t *)req->req_vbuf)+MPT_RQSL(mpt), len); 1725 mpt_free_request(mpt, req); 1726 return (0); 1727 } 1728 1729 int 1730 mpt_read_cfg_header(struct mpt_softc *mpt, int PageType, int PageNumber, 1731 uint32_t PageAddress, CONFIG_PAGE_HEADER *rslt, 1732 int sleep_ok, int timeout_ms) 1733 { 1734 request_t *req; 1735 cfgparms_t params; 1736 MSG_CONFIG *cfgp; 1737 int error; 1738 1739 req = mpt_get_request(mpt, sleep_ok); 1740 if (req == NULL) { 1741 mpt_prt(mpt, "mpt_read_cfg_header: Get request failed!\n"); 1742 return (ENOMEM); 1743 } 1744 1745 bzero(¶ms, sizeof(params)); 1746 params.Action = MPI_CONFIG_ACTION_PAGE_HEADER; 1747 params.PageVersion = 0; 1748 params.PageLength = 0; 1749 params.PageNumber = PageNumber; 1750 params.PageType = PageType; 1751 params.PageAddress = PageAddress; 1752 error = mpt_issue_cfg_req(mpt, req, ¶ms, /*addr*/0, /*len*/0, 1753 sleep_ok, timeout_ms); 1754 if (error != 0) { 1755 /* 1756 * Leave the request. Without resetting the chip, it's 1757 * still owned by it and we'll just get into trouble 1758 * freeing it now. Mark it as abandoned so that if it 1759 * shows up later it can be freed. 1760 */ 1761 mpt_prt(mpt, "read_cfg_header timed out\n"); 1762 return (ETIMEDOUT); 1763 } 1764 1765 switch (req->IOCStatus & MPI_IOCSTATUS_MASK) { 1766 case MPI_IOCSTATUS_SUCCESS: 1767 cfgp = req->req_vbuf; 1768 bcopy(&cfgp->Header, rslt, sizeof(*rslt)); 1769 error = 0; 1770 break; 1771 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: 1772 mpt_lprt(mpt, MPT_PRT_DEBUG, 1773 "Invalid Page Type %d Number %d Addr 0x%0x\n", 1774 PageType, PageNumber, PageAddress); 1775 error = EINVAL; 1776 break; 1777 default: 1778 mpt_prt(mpt, "mpt_read_cfg_header: Config Info Status %x\n", 1779 req->IOCStatus); 1780 error = EIO; 1781 break; 1782 } 1783 mpt_free_request(mpt, req); 1784 return (error); 1785 } 1786 1787 int 1788 mpt_read_cfg_page(struct mpt_softc *mpt, int Action, uint32_t PageAddress, 1789 CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok, 1790 int timeout_ms) 1791 { 1792 request_t *req; 1793 cfgparms_t params; 1794 int error; 1795 1796 req = mpt_get_request(mpt, sleep_ok); 1797 if (req == NULL) { 1798 mpt_prt(mpt, "mpt_read_cfg_page: Get request failed!\n"); 1799 return (-1); 1800 } 1801 1802 bzero(¶ms, sizeof(params)); 1803 params.Action = Action; 1804 params.PageVersion = hdr->PageVersion; 1805 params.PageLength = hdr->PageLength; 1806 params.PageNumber = hdr->PageNumber; 1807 params.PageType = hdr->PageType & MPI_CONFIG_PAGETYPE_MASK; 1808 params.PageAddress = PageAddress; 1809 error = mpt_issue_cfg_req(mpt, req, ¶ms, 1810 req->req_pbuf + MPT_RQSL(mpt), 1811 len, sleep_ok, timeout_ms); 1812 if (error != 0) { 1813 mpt_prt(mpt, "read_cfg_page(%d) timed out\n", Action); 1814 return (-1); 1815 } 1816 1817 if ((req->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 1818 mpt_prt(mpt, "mpt_read_cfg_page: Config Info Status %x\n", 1819 req->IOCStatus); 1820 mpt_free_request(mpt, req); 1821 return (-1); 1822 } 1823 memcpy(hdr, ((uint8_t *)req->req_vbuf)+MPT_RQSL(mpt), len); 1824 mpt_free_request(mpt, req); 1825 return (0); 1826 } 1827 1828 int 1829 mpt_write_cfg_page(struct mpt_softc *mpt, int Action, uint32_t PageAddress, 1830 CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok, 1831 int timeout_ms) 1832 { 1833 request_t *req; 1834 cfgparms_t params; 1835 u_int hdr_attr; 1836 int error; 1837 1838 hdr_attr = hdr->PageType & MPI_CONFIG_PAGEATTR_MASK; 1839 if (hdr_attr != MPI_CONFIG_PAGEATTR_CHANGEABLE && 1840 hdr_attr != MPI_CONFIG_PAGEATTR_PERSISTENT) { 1841 mpt_prt(mpt, "page type 0x%x not changeable\n", 1842 hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); 1843 return (-1); 1844 } 1845 1846 #if 0 1847 /* 1848 * We shouldn't mask off other bits here. 1849 */ 1850 hdr->PageType &= MPI_CONFIG_PAGETYPE_MASK; 1851 #endif 1852 1853 req = mpt_get_request(mpt, sleep_ok); 1854 if (req == NULL) 1855 return (-1); 1856 1857 memcpy(((caddr_t)req->req_vbuf) + MPT_RQSL(mpt), hdr, len); 1858 1859 /* 1860 * There isn't any point in restoring stripped out attributes 1861 * if you then mask them going down to issue the request. 1862 */ 1863 1864 bzero(¶ms, sizeof(params)); 1865 params.Action = Action; 1866 params.PageVersion = hdr->PageVersion; 1867 params.PageLength = hdr->PageLength; 1868 params.PageNumber = hdr->PageNumber; 1869 params.PageAddress = PageAddress; 1870 #if 0 1871 /* Restore stripped out attributes */ 1872 hdr->PageType |= hdr_attr; 1873 params.PageType = hdr->PageType & MPI_CONFIG_PAGETYPE_MASK; 1874 #else 1875 params.PageType = hdr->PageType; 1876 #endif 1877 error = mpt_issue_cfg_req(mpt, req, ¶ms, 1878 req->req_pbuf + MPT_RQSL(mpt), 1879 len, sleep_ok, timeout_ms); 1880 if (error != 0) { 1881 mpt_prt(mpt, "mpt_write_cfg_page timed out\n"); 1882 return (-1); 1883 } 1884 1885 if ((req->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 1886 mpt_prt(mpt, "mpt_write_cfg_page: Config Info Status %x\n", 1887 req->IOCStatus); 1888 mpt_free_request(mpt, req); 1889 return (-1); 1890 } 1891 mpt_free_request(mpt, req); 1892 return (0); 1893 } 1894 1895 /* 1896 * Read IOC configuration information 1897 */ 1898 static int 1899 mpt_read_config_info_ioc(struct mpt_softc *mpt) 1900 { 1901 CONFIG_PAGE_HEADER hdr; 1902 struct mpt_raid_volume *mpt_raid; 1903 int rv; 1904 int i; 1905 size_t len; 1906 1907 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IOC, 1908 2, 0, &hdr, FALSE, 5000); 1909 /* 1910 * If it's an invalid page, so what? Not a supported function.... 1911 */ 1912 if (rv == EINVAL) { 1913 return (0); 1914 } 1915 if (rv) { 1916 return (rv); 1917 } 1918 1919 mpt_lprt(mpt, MPT_PRT_DEBUG, 1920 "IOC Page 2 Header: Version %x len %x PageNumber %x PageType %x\n", 1921 hdr.PageVersion, hdr.PageLength << 2, 1922 hdr.PageNumber, hdr.PageType); 1923 1924 len = hdr.PageLength * sizeof(uint32_t); 1925 mpt->ioc_page2 = kmalloc(len, M_DEVBUF, M_NOWAIT | M_ZERO); 1926 if (mpt->ioc_page2 == NULL) { 1927 mpt_prt(mpt, "unable to allocate memory for IOC page 2\n"); 1928 mpt_raid_free_mem(mpt); 1929 return (ENOMEM); 1930 } 1931 memcpy(&mpt->ioc_page2->Header, &hdr, sizeof(hdr)); 1932 rv = mpt_read_cur_cfg_page(mpt, 0, 1933 &mpt->ioc_page2->Header, len, FALSE, 5000); 1934 if (rv) { 1935 mpt_prt(mpt, "failed to read IOC Page 2\n"); 1936 mpt_raid_free_mem(mpt); 1937 return (EIO); 1938 } 1939 mpt2host_config_page_ioc2(mpt->ioc_page2); 1940 1941 if (mpt->ioc_page2->CapabilitiesFlags != 0) { 1942 uint32_t mask; 1943 1944 mpt_prt(mpt, "Capabilities: ("); 1945 for (mask = 1; mask != 0; mask <<= 1) { 1946 if ((mpt->ioc_page2->CapabilitiesFlags & mask) == 0) { 1947 continue; 1948 } 1949 switch (mask) { 1950 case MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT: 1951 mpt_prtc(mpt, " RAID-0"); 1952 break; 1953 case MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT: 1954 mpt_prtc(mpt, " RAID-1E"); 1955 break; 1956 case MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT: 1957 mpt_prtc(mpt, " RAID-1"); 1958 break; 1959 case MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT: 1960 mpt_prtc(mpt, " SES"); 1961 break; 1962 case MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT: 1963 mpt_prtc(mpt, " SAFTE"); 1964 break; 1965 case MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT: 1966 mpt_prtc(mpt, " Multi-Channel-Arrays"); 1967 default: 1968 break; 1969 } 1970 } 1971 mpt_prtc(mpt, " )\n"); 1972 if ((mpt->ioc_page2->CapabilitiesFlags 1973 & (MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT 1974 | MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT 1975 | MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT)) != 0) { 1976 mpt_prt(mpt, "%d Active Volume%s(%d Max)\n", 1977 mpt->ioc_page2->NumActiveVolumes, 1978 mpt->ioc_page2->NumActiveVolumes != 1 1979 ? "s " : " ", 1980 mpt->ioc_page2->MaxVolumes); 1981 mpt_prt(mpt, "%d Hidden Drive Member%s(%d Max)\n", 1982 mpt->ioc_page2->NumActivePhysDisks, 1983 mpt->ioc_page2->NumActivePhysDisks != 1 1984 ? "s " : " ", 1985 mpt->ioc_page2->MaxPhysDisks); 1986 } 1987 } 1988 1989 len = mpt->ioc_page2->MaxVolumes * sizeof(struct mpt_raid_volume); 1990 mpt->raid_volumes = kmalloc(len, M_DEVBUF, M_NOWAIT | M_ZERO); 1991 if (mpt->raid_volumes == NULL) { 1992 mpt_prt(mpt, "Could not allocate RAID volume data\n"); 1993 mpt_raid_free_mem(mpt); 1994 return (ENOMEM); 1995 } 1996 1997 /* 1998 * Copy critical data out of ioc_page2 so that we can 1999 * safely refresh the page without windows of unreliable 2000 * data. 2001 */ 2002 mpt->raid_max_volumes = mpt->ioc_page2->MaxVolumes; 2003 2004 len = sizeof(*mpt->raid_volumes->config_page) + 2005 (sizeof (RAID_VOL0_PHYS_DISK) * (mpt->ioc_page2->MaxPhysDisks - 1)); 2006 for (i = 0; i < mpt->ioc_page2->MaxVolumes; i++) { 2007 mpt_raid = &mpt->raid_volumes[i]; 2008 mpt_raid->config_page = 2009 kmalloc(len, M_DEVBUF, M_NOWAIT | M_ZERO); 2010 if (mpt_raid->config_page == NULL) { 2011 mpt_prt(mpt, "Could not allocate RAID page data\n"); 2012 mpt_raid_free_mem(mpt); 2013 return (ENOMEM); 2014 } 2015 } 2016 mpt->raid_page0_len = len; 2017 2018 len = mpt->ioc_page2->MaxPhysDisks * sizeof(struct mpt_raid_disk); 2019 mpt->raid_disks = kmalloc(len, M_DEVBUF, M_NOWAIT | M_ZERO); 2020 if (mpt->raid_disks == NULL) { 2021 mpt_prt(mpt, "Could not allocate RAID disk data\n"); 2022 mpt_raid_free_mem(mpt); 2023 return (ENOMEM); 2024 } 2025 mpt->raid_max_disks = mpt->ioc_page2->MaxPhysDisks; 2026 2027 /* 2028 * Load page 3. 2029 */ 2030 rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IOC, 2031 3, 0, &hdr, FALSE, 5000); 2032 if (rv) { 2033 mpt_raid_free_mem(mpt); 2034 return (EIO); 2035 } 2036 2037 mpt_lprt(mpt, MPT_PRT_DEBUG, "IOC Page 3 Header: %x %x %x %x\n", 2038 hdr.PageVersion, hdr.PageLength, hdr.PageNumber, hdr.PageType); 2039 2040 len = hdr.PageLength * sizeof(uint32_t); 2041 mpt->ioc_page3 = kmalloc(len, M_DEVBUF, M_NOWAIT | M_ZERO); 2042 if (mpt->ioc_page3 == NULL) { 2043 mpt_prt(mpt, "unable to allocate memory for IOC page 3\n"); 2044 mpt_raid_free_mem(mpt); 2045 return (ENOMEM); 2046 } 2047 memcpy(&mpt->ioc_page3->Header, &hdr, sizeof(hdr)); 2048 rv = mpt_read_cur_cfg_page(mpt, 0, 2049 &mpt->ioc_page3->Header, len, FALSE, 5000); 2050 if (rv) { 2051 mpt_raid_free_mem(mpt); 2052 return (EIO); 2053 } 2054 mpt2host_config_page_ioc3(mpt->ioc_page3); 2055 mpt_raid_wakeup(mpt); 2056 return (0); 2057 } 2058 2059 /* 2060 * Enable IOC port 2061 */ 2062 static int 2063 mpt_send_port_enable(struct mpt_softc *mpt, int port) 2064 { 2065 request_t *req; 2066 MSG_PORT_ENABLE *enable_req; 2067 int error; 2068 2069 req = mpt_get_request(mpt, /*sleep_ok*/FALSE); 2070 if (req == NULL) 2071 return (-1); 2072 2073 enable_req = req->req_vbuf; 2074 memset(enable_req, 0, MPT_RQSL(mpt)); 2075 2076 enable_req->Function = MPI_FUNCTION_PORT_ENABLE; 2077 enable_req->MsgContext = htole32(req->index | MPT_REPLY_HANDLER_CONFIG); 2078 enable_req->PortNumber = port; 2079 2080 mpt_check_doorbell(mpt); 2081 mpt_lprt(mpt, MPT_PRT_DEBUG, "enabling port %d\n", port); 2082 2083 mpt_send_cmd(mpt, req); 2084 error = mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE, 2085 FALSE, (mpt->is_sas || mpt->is_fc)? 300000 : 30000); 2086 if (error != 0) { 2087 mpt_prt(mpt, "port %d enable timed out\n", port); 2088 return (-1); 2089 } 2090 mpt_free_request(mpt, req); 2091 mpt_lprt(mpt, MPT_PRT_DEBUG, "enabled port %d\n", port); 2092 return (0); 2093 } 2094 2095 /* 2096 * Enable/Disable asynchronous event reporting. 2097 */ 2098 static int 2099 mpt_send_event_request(struct mpt_softc *mpt, int onoff) 2100 { 2101 request_t *req; 2102 MSG_EVENT_NOTIFY *enable_req; 2103 2104 req = mpt_get_request(mpt, FALSE); 2105 if (req == NULL) { 2106 return (ENOMEM); 2107 } 2108 enable_req = req->req_vbuf; 2109 memset(enable_req, 0, sizeof *enable_req); 2110 2111 enable_req->Function = MPI_FUNCTION_EVENT_NOTIFICATION; 2112 enable_req->MsgContext = htole32(req->index | MPT_REPLY_HANDLER_EVENTS); 2113 enable_req->Switch = onoff; 2114 2115 mpt_check_doorbell(mpt); 2116 mpt_lprt(mpt, MPT_PRT_DEBUG, "%sabling async events\n", 2117 onoff ? "en" : "dis"); 2118 /* 2119 * Send the command off, but don't wait for it. 2120 */ 2121 mpt_send_cmd(mpt, req); 2122 return (0); 2123 } 2124 2125 /* 2126 * Un-mask the interrupts on the chip. 2127 */ 2128 void 2129 mpt_enable_ints(struct mpt_softc *mpt) 2130 { 2131 2132 /* Unmask every thing except door bell int */ 2133 mpt_write(mpt, MPT_OFFSET_INTR_MASK, MPT_INTR_DB_MASK); 2134 } 2135 2136 /* 2137 * Mask the interrupts on the chip. 2138 */ 2139 void 2140 mpt_disable_ints(struct mpt_softc *mpt) 2141 { 2142 2143 /* Mask all interrupts */ 2144 mpt_write(mpt, MPT_OFFSET_INTR_MASK, 2145 MPT_INTR_REPLY_MASK | MPT_INTR_DB_MASK); 2146 } 2147 2148 static void 2149 mpt_sysctl_attach(struct mpt_softc *mpt) 2150 { 2151 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(mpt->dev); 2152 struct sysctl_oid *tree = device_get_sysctl_tree(mpt->dev); 2153 2154 SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 2155 "debug", CTLFLAG_RW, &mpt->verbose, 0, 2156 "Debugging/Verbose level"); 2157 SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 2158 "role", CTLFLAG_RD, &mpt->role, 0, 2159 "HBA role"); 2160 #ifdef MPT_TEST_MULTIPATH 2161 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 2162 "failure_id", CTLFLAG_RW, &mpt->failure_id, -1, 2163 "Next Target to Fail"); 2164 #endif 2165 } 2166 2167 int 2168 mpt_attach(struct mpt_softc *mpt) 2169 { 2170 struct mpt_personality *pers; 2171 int i; 2172 int error; 2173 2174 mpt_core_attach(mpt); 2175 mpt_core_enable(mpt); 2176 2177 TAILQ_INSERT_TAIL(&mpt_tailq, mpt, links); 2178 for (i = 0; i < MPT_MAX_PERSONALITIES; i++) { 2179 pers = mpt_personalities[i]; 2180 if (pers == NULL) { 2181 continue; 2182 } 2183 if (pers->probe(mpt) == 0) { 2184 error = pers->attach(mpt); 2185 if (error != 0) { 2186 mpt_detach(mpt); 2187 return (error); 2188 } 2189 mpt->mpt_pers_mask |= (0x1 << pers->id); 2190 pers->use_count++; 2191 } 2192 } 2193 2194 /* 2195 * Now that we've attached everything, do the enable function 2196 * for all of the personalities. This allows the personalities 2197 * to do setups that are appropriate for them prior to enabling 2198 * any ports. 2199 */ 2200 for (i = 0; i < MPT_MAX_PERSONALITIES; i++) { 2201 pers = mpt_personalities[i]; 2202 if (pers != NULL && MPT_PERS_ATTACHED(pers, mpt) != 0) { 2203 error = pers->enable(mpt); 2204 if (error != 0) { 2205 mpt_prt(mpt, "personality %s attached but would" 2206 " not enable (%d)\n", pers->name, error); 2207 mpt_detach(mpt); 2208 return (error); 2209 } 2210 } 2211 } 2212 return (0); 2213 } 2214 2215 int 2216 mpt_shutdown(struct mpt_softc *mpt) 2217 { 2218 struct mpt_personality *pers; 2219 2220 MPT_PERS_FOREACH_REVERSE(mpt, pers) { 2221 pers->shutdown(mpt); 2222 } 2223 return (0); 2224 } 2225 2226 int 2227 mpt_detach(struct mpt_softc *mpt) 2228 { 2229 struct mpt_personality *pers; 2230 2231 MPT_PERS_FOREACH_REVERSE(mpt, pers) { 2232 pers->detach(mpt); 2233 mpt->mpt_pers_mask &= ~(0x1 << pers->id); 2234 pers->use_count--; 2235 } 2236 TAILQ_REMOVE(&mpt_tailq, mpt, links); 2237 return (0); 2238 } 2239 2240 static int 2241 mpt_core_load(struct mpt_personality *pers) 2242 { 2243 int i; 2244 2245 /* 2246 * Setup core handlers and insert the default handler 2247 * into all "empty slots". 2248 */ 2249 for (i = 0; i < MPT_NUM_REPLY_HANDLERS; i++) { 2250 mpt_reply_handlers[i] = mpt_default_reply_handler; 2251 } 2252 2253 mpt_reply_handlers[MPT_CBI(MPT_REPLY_HANDLER_EVENTS)] = 2254 mpt_event_reply_handler; 2255 mpt_reply_handlers[MPT_CBI(MPT_REPLY_HANDLER_CONFIG)] = 2256 mpt_config_reply_handler; 2257 mpt_reply_handlers[MPT_CBI(MPT_REPLY_HANDLER_HANDSHAKE)] = 2258 mpt_handshake_reply_handler; 2259 return (0); 2260 } 2261 2262 /* 2263 * Initialize per-instance driver data and perform 2264 * initial controller configuration. 2265 */ 2266 static int 2267 mpt_core_attach(struct mpt_softc *mpt) 2268 { 2269 int val, error; 2270 2271 LIST_INIT(&mpt->ack_frames); 2272 /* Put all request buffers on the free list */ 2273 TAILQ_INIT(&mpt->request_pending_list); 2274 TAILQ_INIT(&mpt->request_free_list); 2275 TAILQ_INIT(&mpt->request_timeout_list); 2276 for (val = 0; val < MPT_MAX_LUNS; val++) { 2277 STAILQ_INIT(&mpt->trt[val].atios); 2278 STAILQ_INIT(&mpt->trt[val].inots); 2279 } 2280 STAILQ_INIT(&mpt->trt_wildcard.atios); 2281 STAILQ_INIT(&mpt->trt_wildcard.inots); 2282 #ifdef MPT_TEST_MULTIPATH 2283 mpt->failure_id = -1; 2284 #endif 2285 mpt->scsi_tgt_handler_id = MPT_HANDLER_ID_NONE; 2286 mpt_sysctl_attach(mpt); 2287 mpt_lprt(mpt, MPT_PRT_DEBUG, "doorbell req = %s\n", 2288 mpt_ioc_diag(mpt_read(mpt, MPT_OFFSET_DOORBELL))); 2289 2290 MPT_LOCK(mpt); 2291 error = mpt_configure_ioc(mpt, 0, 0); 2292 MPT_UNLOCK(mpt); 2293 2294 return (error); 2295 } 2296 2297 static int 2298 mpt_core_enable(struct mpt_softc *mpt) 2299 { 2300 2301 /* 2302 * We enter with the IOC enabled, but async events 2303 * not enabled, ports not enabled and interrupts 2304 * not enabled. 2305 */ 2306 MPT_LOCK(mpt); 2307 2308 /* 2309 * Enable asynchronous event reporting- all personalities 2310 * have attached so that they should be able to now field 2311 * async events. 2312 */ 2313 mpt_send_event_request(mpt, 1); 2314 2315 /* 2316 * Catch any pending interrupts 2317 * 2318 * This seems to be crucial- otherwise 2319 * the portenable below times out. 2320 */ 2321 mpt_intr(mpt); 2322 2323 /* 2324 * Enable Interrupts 2325 */ 2326 mpt_enable_ints(mpt); 2327 2328 /* 2329 * Catch any pending interrupts 2330 * 2331 * This seems to be crucial- otherwise 2332 * the portenable below times out. 2333 */ 2334 mpt_intr(mpt); 2335 2336 /* 2337 * Enable the port. 2338 */ 2339 if (mpt_send_port_enable(mpt, 0) != MPT_OK) { 2340 mpt_prt(mpt, "failed to enable port 0\n"); 2341 MPT_UNLOCK(mpt); 2342 return (ENXIO); 2343 } 2344 MPT_UNLOCK(mpt); 2345 return (0); 2346 } 2347 2348 static void 2349 mpt_core_shutdown(struct mpt_softc *mpt) 2350 { 2351 2352 mpt_disable_ints(mpt); 2353 } 2354 2355 static void 2356 mpt_core_detach(struct mpt_softc *mpt) 2357 { 2358 int val; 2359 2360 /* 2361 * XXX: FREE MEMORY 2362 */ 2363 mpt_disable_ints(mpt); 2364 2365 /* Make sure no request has pending timeouts. */ 2366 for (val = 0; val < MPT_MAX_REQUESTS(mpt); val++) { 2367 request_t *req = &mpt->request_pool[val]; 2368 mpt_callout_drain(mpt, &req->callout); 2369 } 2370 2371 mpt_dma_buf_free(mpt); 2372 } 2373 2374 static int 2375 mpt_core_unload(struct mpt_personality *pers) 2376 { 2377 2378 /* Unload is always successful. */ 2379 return (0); 2380 } 2381 2382 #define FW_UPLOAD_REQ_SIZE \ 2383 (sizeof(MSG_FW_UPLOAD) - sizeof(SGE_MPI_UNION) \ 2384 + sizeof(FW_UPLOAD_TCSGE) + sizeof(SGE_SIMPLE32)) 2385 2386 static int 2387 mpt_upload_fw(struct mpt_softc *mpt) 2388 { 2389 uint8_t fw_req_buf[FW_UPLOAD_REQ_SIZE]; 2390 MSG_FW_UPLOAD_REPLY fw_reply; 2391 MSG_FW_UPLOAD *fw_req; 2392 FW_UPLOAD_TCSGE *tsge; 2393 SGE_SIMPLE32 *sge; 2394 uint32_t flags; 2395 int error; 2396 2397 memset(&fw_req_buf, 0, sizeof(fw_req_buf)); 2398 fw_req = (MSG_FW_UPLOAD *)fw_req_buf; 2399 fw_req->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; 2400 fw_req->Function = MPI_FUNCTION_FW_UPLOAD; 2401 fw_req->MsgContext = htole32(MPT_REPLY_HANDLER_HANDSHAKE); 2402 tsge = (FW_UPLOAD_TCSGE *)&fw_req->SGL; 2403 tsge->DetailsLength = 12; 2404 tsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 2405 tsge->ImageSize = htole32(mpt->fw_image_size); 2406 sge = (SGE_SIMPLE32 *)(tsge + 1); 2407 flags = (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER 2408 | MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_SIMPLE_ELEMENT 2409 | MPI_SGE_FLAGS_32_BIT_ADDRESSING | MPI_SGE_FLAGS_IOC_TO_HOST); 2410 flags <<= MPI_SGE_FLAGS_SHIFT; 2411 sge->FlagsLength = htole32(flags | mpt->fw_image_size); 2412 sge->Address = htole32(mpt->fw_phys); 2413 bus_dmamap_sync(mpt->fw_dmat, mpt->fw_dmap, BUS_DMASYNC_PREREAD); 2414 error = mpt_send_handshake_cmd(mpt, sizeof(fw_req_buf), &fw_req_buf); 2415 if (error) 2416 return(error); 2417 error = mpt_recv_handshake_reply(mpt, sizeof(fw_reply), &fw_reply); 2418 bus_dmamap_sync(mpt->fw_dmat, mpt->fw_dmap, BUS_DMASYNC_POSTREAD); 2419 return (error); 2420 } 2421 2422 static void 2423 mpt_diag_outsl(struct mpt_softc *mpt, uint32_t addr, 2424 uint32_t *data, bus_size_t len) 2425 { 2426 uint32_t *data_end; 2427 2428 data_end = data + (roundup2(len, sizeof(uint32_t)) / 4); 2429 if (mpt->is_sas) { 2430 pci_enable_io(mpt->dev, SYS_RES_IOPORT); 2431 } 2432 mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, addr); 2433 while (data != data_end) { 2434 mpt_pio_write(mpt, MPT_OFFSET_DIAG_DATA, *data); 2435 data++; 2436 } 2437 if (mpt->is_sas) { 2438 pci_disable_io(mpt->dev, SYS_RES_IOPORT); 2439 } 2440 } 2441 2442 static int 2443 mpt_download_fw(struct mpt_softc *mpt) 2444 { 2445 MpiFwHeader_t *fw_hdr; 2446 int error; 2447 uint32_t ext_offset; 2448 uint32_t data; 2449 2450 if (mpt->pci_pio_reg == NULL) { 2451 mpt_prt(mpt, "No PIO resource!\n"); 2452 return (ENXIO); 2453 } 2454 2455 mpt_prt(mpt, "Downloading Firmware - Image Size %d\n", 2456 mpt->fw_image_size); 2457 2458 error = mpt_enable_diag_mode(mpt); 2459 if (error != 0) { 2460 mpt_prt(mpt, "Could not enter diagnostic mode!\n"); 2461 return (EIO); 2462 } 2463 2464 mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, 2465 MPI_DIAG_RW_ENABLE|MPI_DIAG_DISABLE_ARM); 2466 2467 fw_hdr = (MpiFwHeader_t *)mpt->fw_image; 2468 bus_dmamap_sync(mpt->fw_dmat, mpt->fw_dmap, BUS_DMASYNC_PREWRITE); 2469 mpt_diag_outsl(mpt, fw_hdr->LoadStartAddress, (uint32_t*)fw_hdr, 2470 fw_hdr->ImageSize); 2471 bus_dmamap_sync(mpt->fw_dmat, mpt->fw_dmap, BUS_DMASYNC_POSTWRITE); 2472 2473 ext_offset = fw_hdr->NextImageHeaderOffset; 2474 while (ext_offset != 0) { 2475 MpiExtImageHeader_t *ext; 2476 2477 ext = (MpiExtImageHeader_t *)((uintptr_t)fw_hdr + ext_offset); 2478 ext_offset = ext->NextImageHeaderOffset; 2479 bus_dmamap_sync(mpt->fw_dmat, mpt->fw_dmap, 2480 BUS_DMASYNC_PREWRITE); 2481 mpt_diag_outsl(mpt, ext->LoadStartAddress, (uint32_t*)ext, 2482 ext->ImageSize); 2483 bus_dmamap_sync(mpt->fw_dmat, mpt->fw_dmap, 2484 BUS_DMASYNC_POSTWRITE); 2485 } 2486 2487 if (mpt->is_sas) { 2488 pci_enable_io(mpt->dev, SYS_RES_IOPORT); 2489 } 2490 /* Setup the address to jump to on reset. */ 2491 mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, fw_hdr->IopResetRegAddr); 2492 mpt_pio_write(mpt, MPT_OFFSET_DIAG_DATA, fw_hdr->IopResetVectorValue); 2493 2494 /* 2495 * The controller sets the "flash bad" status after attempting 2496 * to auto-boot from flash. Clear the status so that the controller 2497 * will continue the boot process with our newly installed firmware. 2498 */ 2499 mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, MPT_DIAG_MEM_CFG_BASE); 2500 data = mpt_pio_read(mpt, MPT_OFFSET_DIAG_DATA) | MPT_DIAG_MEM_CFG_BADFL; 2501 mpt_pio_write(mpt, MPT_OFFSET_DIAG_ADDR, MPT_DIAG_MEM_CFG_BASE); 2502 mpt_pio_write(mpt, MPT_OFFSET_DIAG_DATA, data); 2503 2504 if (mpt->is_sas) { 2505 pci_disable_io(mpt->dev, SYS_RES_IOPORT); 2506 } 2507 2508 /* 2509 * Re-enable the processor and clear the boot halt flag. 2510 */ 2511 data = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); 2512 data &= ~(MPI_DIAG_PREVENT_IOC_BOOT|MPI_DIAG_DISABLE_ARM); 2513 mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, data); 2514 2515 mpt_disable_diag_mode(mpt); 2516 return (0); 2517 } 2518 2519 static int 2520 mpt_dma_buf_alloc(struct mpt_softc *mpt) 2521 { 2522 struct mpt_map_info mi; 2523 uint8_t *vptr; 2524 uint32_t pptr, end; 2525 int i, error; 2526 2527 /* Create a child tag for data buffers */ 2528 if (mpt_dma_tag_create(mpt, mpt->parent_dmat, 1, 2529 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 2530 NULL, NULL, (mpt->max_cam_seg_cnt - 1) * PAGE_SIZE, 2531 mpt->max_cam_seg_cnt, BUS_SPACE_MAXSIZE_32BIT, 0, 2532 &mpt->buffer_dmat) != 0) { 2533 mpt_prt(mpt, "cannot create a dma tag for data buffers\n"); 2534 return (1); 2535 } 2536 2537 /* Create a child tag for request buffers */ 2538 if (mpt_dma_tag_create(mpt, mpt->parent_dmat, PAGE_SIZE, 0, 2539 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, 2540 NULL, NULL, MPT_REQ_MEM_SIZE(mpt), 1, BUS_SPACE_MAXSIZE_32BIT, 0, 2541 &mpt->request_dmat) != 0) { 2542 mpt_prt(mpt, "cannot create a dma tag for requests\n"); 2543 return (1); 2544 } 2545 2546 /* Allocate some DMA accessible memory for requests */ 2547 if (bus_dmamem_alloc(mpt->request_dmat, (void **)&mpt->request, 2548 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &mpt->request_dmap) != 0) { 2549 mpt_prt(mpt, "cannot allocate %d bytes of request memory\n", 2550 MPT_REQ_MEM_SIZE(mpt)); 2551 return (1); 2552 } 2553 2554 mi.mpt = mpt; 2555 mi.error = 0; 2556 2557 /* Load and lock it into "bus space" */ 2558 bus_dmamap_load(mpt->request_dmat, mpt->request_dmap, mpt->request, 2559 MPT_REQ_MEM_SIZE(mpt), mpt_map_rquest, &mi, 0); 2560 2561 if (mi.error) { 2562 mpt_prt(mpt, "error %d loading dma map for DMA request queue\n", 2563 mi.error); 2564 return (1); 2565 } 2566 mpt->request_phys = mi.phys; 2567 2568 /* 2569 * Now create per-request dma maps 2570 */ 2571 i = 0; 2572 pptr = mpt->request_phys; 2573 vptr = mpt->request; 2574 end = pptr + MPT_REQ_MEM_SIZE(mpt); 2575 while(pptr < end) { 2576 request_t *req = &mpt->request_pool[i]; 2577 req->index = i++; 2578 2579 /* Store location of Request Data */ 2580 req->req_pbuf = pptr; 2581 req->req_vbuf = vptr; 2582 2583 pptr += MPT_REQUEST_AREA; 2584 vptr += MPT_REQUEST_AREA; 2585 2586 req->sense_pbuf = (pptr - MPT_SENSE_SIZE); 2587 req->sense_vbuf = (vptr - MPT_SENSE_SIZE); 2588 2589 error = bus_dmamap_create(mpt->buffer_dmat, 0, &req->dmap); 2590 if (error) { 2591 mpt_prt(mpt, "error %d creating per-cmd DMA maps\n", 2592 error); 2593 return (1); 2594 } 2595 } 2596 2597 return (0); 2598 } 2599 2600 static void 2601 mpt_dma_buf_free(struct mpt_softc *mpt) 2602 { 2603 int i; 2604 2605 if (mpt->request_dmat == 0) { 2606 mpt_lprt(mpt, MPT_PRT_DEBUG, "already released dma memory\n"); 2607 return; 2608 } 2609 for (i = 0; i < MPT_MAX_REQUESTS(mpt); i++) { 2610 bus_dmamap_destroy(mpt->buffer_dmat, mpt->request_pool[i].dmap); 2611 } 2612 bus_dmamap_unload(mpt->request_dmat, mpt->request_dmap); 2613 bus_dmamem_free(mpt->request_dmat, mpt->request, mpt->request_dmap); 2614 bus_dma_tag_destroy(mpt->request_dmat); 2615 mpt->request_dmat = 0; 2616 bus_dma_tag_destroy(mpt->buffer_dmat); 2617 } 2618 2619 /* 2620 * Allocate/Initialize data structures for the controller. Called 2621 * once at instance startup. 2622 */ 2623 static int 2624 mpt_configure_ioc(struct mpt_softc *mpt, int tn, int needreset) 2625 { 2626 PTR_MSG_PORT_FACTS_REPLY pfp; 2627 int error, port, val; 2628 size_t len; 2629 2630 if (tn == MPT_MAX_TRYS) { 2631 return (-1); 2632 } 2633 2634 /* 2635 * No need to reset if the IOC is already in the READY state. 2636 * 2637 * Force reset if initialization failed previously. 2638 * Note that a hard_reset of the second channel of a '929 2639 * will stop operation of the first channel. Hopefully, if the 2640 * first channel is ok, the second will not require a hard 2641 * reset. 2642 */ 2643 if (needreset || MPT_STATE(mpt_rd_db(mpt)) != MPT_DB_STATE_READY) { 2644 if (mpt_reset(mpt, FALSE) != MPT_OK) { 2645 return (mpt_configure_ioc(mpt, tn++, 1)); 2646 } 2647 needreset = 0; 2648 } 2649 2650 if (mpt_get_iocfacts(mpt, &mpt->ioc_facts) != MPT_OK) { 2651 mpt_prt(mpt, "mpt_get_iocfacts failed\n"); 2652 return (mpt_configure_ioc(mpt, tn++, 1)); 2653 } 2654 mpt2host_iocfacts_reply(&mpt->ioc_facts); 2655 2656 mpt_prt(mpt, "MPI Version=%d.%d.%d.%d\n", 2657 mpt->ioc_facts.MsgVersion >> 8, 2658 mpt->ioc_facts.MsgVersion & 0xFF, 2659 mpt->ioc_facts.HeaderVersion >> 8, 2660 mpt->ioc_facts.HeaderVersion & 0xFF); 2661 2662 /* 2663 * Now that we know request frame size, we can calculate 2664 * the actual (reasonable) segment limit for read/write I/O. 2665 * 2666 * This limit is constrained by: 2667 * 2668 * + The size of each area we allocate per command (and how 2669 * many chain segments we can fit into it). 2670 * + The total number of areas we've set up. 2671 * + The actual chain depth the card will allow. 2672 * 2673 * The first area's segment count is limited by the I/O request 2674 * at the head of it. We cannot allocate realistically more 2675 * than MPT_MAX_REQUESTS areas. Therefore, to account for both 2676 * conditions, we'll just start out with MPT_MAX_REQUESTS-2. 2677 * 2678 */ 2679 /* total number of request areas we (can) allocate */ 2680 mpt->max_seg_cnt = MPT_MAX_REQUESTS(mpt) - 2; 2681 2682 /* converted to the number of chain areas possible */ 2683 mpt->max_seg_cnt *= MPT_NRFM(mpt); 2684 2685 /* limited by the number of chain areas the card will support */ 2686 if (mpt->max_seg_cnt > mpt->ioc_facts.MaxChainDepth) { 2687 mpt_lprt(mpt, MPT_PRT_INFO, 2688 "chain depth limited to %u (from %u)\n", 2689 mpt->ioc_facts.MaxChainDepth, mpt->max_seg_cnt); 2690 mpt->max_seg_cnt = mpt->ioc_facts.MaxChainDepth; 2691 } 2692 2693 /* converted to the number of simple sges in chain segments. */ 2694 mpt->max_seg_cnt *= (MPT_NSGL(mpt) - 1); 2695 2696 /* 2697 * Use this as the basis for reporting the maximum I/O size to CAM. 2698 */ 2699 mpt->max_cam_seg_cnt = min(mpt->max_seg_cnt, (MAXPHYS / PAGE_SIZE) + 1); 2700 2701 error = mpt_dma_buf_alloc(mpt); 2702 if (error != 0) { 2703 mpt_prt(mpt, "mpt_dma_buf_alloc() failed!\n"); 2704 return (EIO); 2705 } 2706 2707 for (val = 0; val < MPT_MAX_REQUESTS(mpt); val++) { 2708 request_t *req = &mpt->request_pool[val]; 2709 req->state = REQ_STATE_ALLOCATED; 2710 mpt_callout_init(mpt, &req->callout); 2711 mpt_free_request(mpt, req); 2712 } 2713 2714 mpt_lprt(mpt, MPT_PRT_INFO, "Maximum Segment Count: %u, Maximum " 2715 "CAM Segment Count: %u\n", mpt->max_seg_cnt, 2716 mpt->max_cam_seg_cnt); 2717 2718 mpt_lprt(mpt, MPT_PRT_INFO, "MsgLength=%u IOCNumber = %d\n", 2719 mpt->ioc_facts.MsgLength, mpt->ioc_facts.IOCNumber); 2720 mpt_lprt(mpt, MPT_PRT_INFO, 2721 "IOCFACTS: GlobalCredits=%d BlockSize=%u bytes " 2722 "Request Frame Size %u bytes Max Chain Depth %u\n", 2723 mpt->ioc_facts.GlobalCredits, mpt->ioc_facts.BlockSize, 2724 mpt->ioc_facts.RequestFrameSize << 2, 2725 mpt->ioc_facts.MaxChainDepth); 2726 mpt_lprt(mpt, MPT_PRT_INFO, "IOCFACTS: Num Ports %d, FWImageSize %d, " 2727 "Flags=%#x\n", mpt->ioc_facts.NumberOfPorts, 2728 mpt->ioc_facts.FWImageSize, mpt->ioc_facts.Flags); 2729 2730 len = mpt->ioc_facts.NumberOfPorts * sizeof (MSG_PORT_FACTS_REPLY); 2731 mpt->port_facts = kmalloc(len, M_DEVBUF, M_NOWAIT | M_ZERO); 2732 if (mpt->port_facts == NULL) { 2733 mpt_prt(mpt, "unable to allocate memory for port facts\n"); 2734 return (ENOMEM); 2735 } 2736 2737 2738 if ((mpt->ioc_facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) && 2739 (mpt->fw_uploaded == 0)) { 2740 struct mpt_map_info mi; 2741 2742 /* 2743 * In some configurations, the IOC's firmware is 2744 * stored in a shared piece of system NVRAM that 2745 * is only accessible via the BIOS. In this 2746 * case, the firmware keeps a copy of firmware in 2747 * RAM until the OS driver retrieves it. Once 2748 * retrieved, we are responsible for re-downloading 2749 * the firmware after any hard-reset. 2750 */ 2751 mpt->fw_image_size = mpt->ioc_facts.FWImageSize; 2752 error = mpt_dma_tag_create(mpt, mpt->parent_dmat, 1, 0, 2753 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 2754 mpt->fw_image_size, 1, mpt->fw_image_size, 0, 2755 &mpt->fw_dmat); 2756 if (error != 0) { 2757 mpt_prt(mpt, "cannot create firmware dma tag\n"); 2758 return (ENOMEM); 2759 } 2760 error = bus_dmamem_alloc(mpt->fw_dmat, 2761 (void **)&mpt->fw_image, BUS_DMA_NOWAIT | 2762 BUS_DMA_COHERENT, &mpt->fw_dmap); 2763 if (error != 0) { 2764 mpt_prt(mpt, "cannot allocate firmware memory\n"); 2765 bus_dma_tag_destroy(mpt->fw_dmat); 2766 return (ENOMEM); 2767 } 2768 mi.mpt = mpt; 2769 mi.error = 0; 2770 bus_dmamap_load(mpt->fw_dmat, mpt->fw_dmap, 2771 mpt->fw_image, mpt->fw_image_size, mpt_map_rquest, &mi, 0); 2772 mpt->fw_phys = mi.phys; 2773 2774 error = mpt_upload_fw(mpt); 2775 if (error != 0) { 2776 mpt_prt(mpt, "firmware upload failed.\n"); 2777 bus_dmamap_unload(mpt->fw_dmat, mpt->fw_dmap); 2778 bus_dmamem_free(mpt->fw_dmat, mpt->fw_image, 2779 mpt->fw_dmap); 2780 bus_dma_tag_destroy(mpt->fw_dmat); 2781 mpt->fw_image = NULL; 2782 return (EIO); 2783 } 2784 mpt->fw_uploaded = 1; 2785 } 2786 2787 for (port = 0; port < mpt->ioc_facts.NumberOfPorts; port++) { 2788 pfp = &mpt->port_facts[port]; 2789 error = mpt_get_portfacts(mpt, 0, pfp); 2790 if (error != MPT_OK) { 2791 mpt_prt(mpt, 2792 "mpt_get_portfacts on port %d failed\n", port); 2793 kfree(mpt->port_facts, M_DEVBUF); 2794 mpt->port_facts = NULL; 2795 return (mpt_configure_ioc(mpt, tn++, 1)); 2796 } 2797 mpt2host_portfacts_reply(pfp); 2798 2799 if (port > 0) { 2800 error = MPT_PRT_INFO; 2801 } else { 2802 error = MPT_PRT_DEBUG; 2803 } 2804 mpt_lprt(mpt, error, 2805 "PORTFACTS[%d]: Type %x PFlags %x IID %d MaxDev %d\n", 2806 port, pfp->PortType, pfp->ProtocolFlags, pfp->PortSCSIID, 2807 pfp->MaxDevices); 2808 2809 } 2810 2811 /* 2812 * XXX: Not yet supporting more than port 0 2813 */ 2814 pfp = &mpt->port_facts[0]; 2815 if (pfp->PortType == MPI_PORTFACTS_PORTTYPE_FC) { 2816 mpt->is_fc = 1; 2817 mpt->is_sas = 0; 2818 mpt->is_spi = 0; 2819 } else if (pfp->PortType == MPI_PORTFACTS_PORTTYPE_SAS) { 2820 mpt->is_fc = 0; 2821 mpt->is_sas = 1; 2822 mpt->is_spi = 0; 2823 } else if (pfp->PortType == MPI_PORTFACTS_PORTTYPE_SCSI) { 2824 mpt->is_fc = 0; 2825 mpt->is_sas = 0; 2826 mpt->is_spi = 1; 2827 if (mpt->mpt_ini_id == MPT_INI_ID_NONE) 2828 mpt->mpt_ini_id = pfp->PortSCSIID; 2829 } else if (pfp->PortType == MPI_PORTFACTS_PORTTYPE_ISCSI) { 2830 mpt_prt(mpt, "iSCSI not supported yet\n"); 2831 return (ENXIO); 2832 } else if (pfp->PortType == MPI_PORTFACTS_PORTTYPE_INACTIVE) { 2833 mpt_prt(mpt, "Inactive Port\n"); 2834 return (ENXIO); 2835 } else { 2836 mpt_prt(mpt, "unknown Port Type %#x\n", pfp->PortType); 2837 return (ENXIO); 2838 } 2839 2840 /* 2841 * Set our role with what this port supports. 2842 * 2843 * Note this might be changed later in different modules 2844 * if this is different from what is wanted. 2845 */ 2846 mpt->role = MPT_ROLE_NONE; 2847 if (pfp->ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { 2848 mpt->role |= MPT_ROLE_INITIATOR; 2849 } 2850 if (pfp->ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2851 mpt->role |= MPT_ROLE_TARGET; 2852 } 2853 2854 /* 2855 * Enable the IOC 2856 */ 2857 if (mpt_enable_ioc(mpt, 1) != MPT_OK) { 2858 mpt_prt(mpt, "unable to initialize IOC\n"); 2859 return (ENXIO); 2860 } 2861 2862 /* 2863 * Read IOC configuration information. 2864 * 2865 * We need this to determine whether or not we have certain 2866 * settings for Integrated Mirroring (e.g.). 2867 */ 2868 mpt_read_config_info_ioc(mpt); 2869 2870 return (0); 2871 } 2872 2873 static int 2874 mpt_enable_ioc(struct mpt_softc *mpt, int portenable) 2875 { 2876 uint32_t pptr; 2877 int val; 2878 2879 if (mpt_send_ioc_init(mpt, MPI_WHOINIT_HOST_DRIVER) != MPT_OK) { 2880 mpt_prt(mpt, "mpt_send_ioc_init failed\n"); 2881 return (EIO); 2882 } 2883 2884 mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_send_ioc_init ok\n"); 2885 2886 if (mpt_wait_state(mpt, MPT_DB_STATE_RUNNING) != MPT_OK) { 2887 mpt_prt(mpt, "IOC failed to go to run state\n"); 2888 return (ENXIO); 2889 } 2890 mpt_lprt(mpt, MPT_PRT_DEBUG, "IOC now at RUNSTATE\n"); 2891 2892 /* 2893 * Give it reply buffers 2894 * 2895 * Do *not* exceed global credits. 2896 */ 2897 for (val = 0, pptr = mpt->reply_phys; 2898 (pptr + MPT_REPLY_SIZE) < (mpt->reply_phys + PAGE_SIZE); 2899 pptr += MPT_REPLY_SIZE) { 2900 mpt_free_reply(mpt, pptr); 2901 if (++val == mpt->ioc_facts.GlobalCredits - 1) 2902 break; 2903 } 2904 2905 2906 /* 2907 * Enable the port if asked. This is only done if we're resetting 2908 * the IOC after initial startup. 2909 */ 2910 if (portenable) { 2911 /* 2912 * Enable asynchronous event reporting 2913 */ 2914 mpt_send_event_request(mpt, 1); 2915 2916 if (mpt_send_port_enable(mpt, 0) != MPT_OK) { 2917 mpt_prt(mpt, "%s: failed to enable port 0\n", __func__); 2918 return (ENXIO); 2919 } 2920 } 2921 return (MPT_OK); 2922 } 2923 2924 /* 2925 * Endian Conversion Functions- only used on Big Endian machines 2926 */ 2927 #if _BYTE_ORDER == _BIG_ENDIAN 2928 void 2929 mpt2host_sge_simple_union(SGE_SIMPLE_UNION *sge) 2930 { 2931 2932 MPT_2_HOST32(sge, FlagsLength); 2933 MPT_2_HOST32(sge, u.Address64.Low); 2934 MPT_2_HOST32(sge, u.Address64.High); 2935 } 2936 2937 void 2938 mpt2host_iocfacts_reply(MSG_IOC_FACTS_REPLY *rp) 2939 { 2940 2941 MPT_2_HOST16(rp, MsgVersion); 2942 MPT_2_HOST16(rp, HeaderVersion); 2943 MPT_2_HOST32(rp, MsgContext); 2944 MPT_2_HOST16(rp, IOCExceptions); 2945 MPT_2_HOST16(rp, IOCStatus); 2946 MPT_2_HOST32(rp, IOCLogInfo); 2947 MPT_2_HOST16(rp, ReplyQueueDepth); 2948 MPT_2_HOST16(rp, RequestFrameSize); 2949 MPT_2_HOST16(rp, Reserved_0101_FWVersion); 2950 MPT_2_HOST16(rp, ProductID); 2951 MPT_2_HOST32(rp, CurrentHostMfaHighAddr); 2952 MPT_2_HOST16(rp, GlobalCredits); 2953 MPT_2_HOST32(rp, CurrentSenseBufferHighAddr); 2954 MPT_2_HOST16(rp, CurReplyFrameSize); 2955 MPT_2_HOST32(rp, FWImageSize); 2956 MPT_2_HOST32(rp, IOCCapabilities); 2957 MPT_2_HOST32(rp, FWVersion.Word); 2958 MPT_2_HOST16(rp, HighPriorityQueueDepth); 2959 MPT_2_HOST16(rp, Reserved2); 2960 mpt2host_sge_simple_union(&rp->HostPageBufferSGE); 2961 MPT_2_HOST32(rp, ReplyFifoHostSignalingAddr); 2962 } 2963 2964 void 2965 mpt2host_portfacts_reply(MSG_PORT_FACTS_REPLY *pfp) 2966 { 2967 2968 MPT_2_HOST16(pfp, Reserved); 2969 MPT_2_HOST16(pfp, Reserved1); 2970 MPT_2_HOST32(pfp, MsgContext); 2971 MPT_2_HOST16(pfp, Reserved2); 2972 MPT_2_HOST16(pfp, IOCStatus); 2973 MPT_2_HOST32(pfp, IOCLogInfo); 2974 MPT_2_HOST16(pfp, MaxDevices); 2975 MPT_2_HOST16(pfp, PortSCSIID); 2976 MPT_2_HOST16(pfp, ProtocolFlags); 2977 MPT_2_HOST16(pfp, MaxPostedCmdBuffers); 2978 MPT_2_HOST16(pfp, MaxPersistentIDs); 2979 MPT_2_HOST16(pfp, MaxLanBuckets); 2980 MPT_2_HOST16(pfp, Reserved4); 2981 MPT_2_HOST32(pfp, Reserved5); 2982 } 2983 2984 void 2985 mpt2host_config_page_ioc2(CONFIG_PAGE_IOC_2 *ioc2) 2986 { 2987 int i; 2988 2989 MPT_2_HOST32(ioc2, CapabilitiesFlags); 2990 for (i = 0; i < MPI_IOC_PAGE_2_RAID_VOLUME_MAX; i++) { 2991 MPT_2_HOST16(ioc2, RaidVolume[i].Reserved3); 2992 } 2993 } 2994 2995 void 2996 mpt2host_config_page_ioc3(CONFIG_PAGE_IOC_3 *ioc3) 2997 { 2998 2999 MPT_2_HOST16(ioc3, Reserved2); 3000 } 3001 3002 void 3003 mpt2host_config_page_scsi_port_0(CONFIG_PAGE_SCSI_PORT_0 *sp0) 3004 { 3005 3006 MPT_2_HOST32(sp0, Capabilities); 3007 MPT_2_HOST32(sp0, PhysicalInterface); 3008 } 3009 3010 void 3011 mpt2host_config_page_scsi_port_1(CONFIG_PAGE_SCSI_PORT_1 *sp1) 3012 { 3013 3014 MPT_2_HOST32(sp1, Configuration); 3015 MPT_2_HOST32(sp1, OnBusTimerValue); 3016 MPT_2_HOST16(sp1, IDConfig); 3017 } 3018 3019 void 3020 host2mpt_config_page_scsi_port_1(CONFIG_PAGE_SCSI_PORT_1 *sp1) 3021 { 3022 3023 HOST_2_MPT32(sp1, Configuration); 3024 HOST_2_MPT32(sp1, OnBusTimerValue); 3025 HOST_2_MPT16(sp1, IDConfig); 3026 } 3027 3028 void 3029 mpt2host_config_page_scsi_port_2(CONFIG_PAGE_SCSI_PORT_2 *sp2) 3030 { 3031 int i; 3032 3033 MPT_2_HOST32(sp2, PortFlags); 3034 MPT_2_HOST32(sp2, PortSettings); 3035 for (i = 0; i < sizeof(sp2->DeviceSettings) / 3036 sizeof(*sp2->DeviceSettings); i++) { 3037 MPT_2_HOST16(sp2, DeviceSettings[i].DeviceFlags); 3038 } 3039 } 3040 3041 void 3042 mpt2host_config_page_scsi_device_0(CONFIG_PAGE_SCSI_DEVICE_0 *sd0) 3043 { 3044 3045 MPT_2_HOST32(sd0, NegotiatedParameters); 3046 MPT_2_HOST32(sd0, Information); 3047 } 3048 3049 void 3050 mpt2host_config_page_scsi_device_1(CONFIG_PAGE_SCSI_DEVICE_1 *sd1) 3051 { 3052 3053 MPT_2_HOST32(sd1, RequestedParameters); 3054 MPT_2_HOST32(sd1, Reserved); 3055 MPT_2_HOST32(sd1, Configuration); 3056 } 3057 3058 void 3059 host2mpt_config_page_scsi_device_1(CONFIG_PAGE_SCSI_DEVICE_1 *sd1) 3060 { 3061 3062 HOST_2_MPT32(sd1, RequestedParameters); 3063 HOST_2_MPT32(sd1, Reserved); 3064 HOST_2_MPT32(sd1, Configuration); 3065 } 3066 3067 void 3068 mpt2host_config_page_fc_port_0(CONFIG_PAGE_FC_PORT_0 *fp0) 3069 { 3070 3071 MPT_2_HOST32(fp0, Flags); 3072 MPT_2_HOST32(fp0, PortIdentifier); 3073 MPT_2_HOST32(fp0, WWNN.Low); 3074 MPT_2_HOST32(fp0, WWNN.High); 3075 MPT_2_HOST32(fp0, WWPN.Low); 3076 MPT_2_HOST32(fp0, WWPN.High); 3077 MPT_2_HOST32(fp0, SupportedServiceClass); 3078 MPT_2_HOST32(fp0, SupportedSpeeds); 3079 MPT_2_HOST32(fp0, CurrentSpeed); 3080 MPT_2_HOST32(fp0, MaxFrameSize); 3081 MPT_2_HOST32(fp0, FabricWWNN.Low); 3082 MPT_2_HOST32(fp0, FabricWWNN.High); 3083 MPT_2_HOST32(fp0, FabricWWPN.Low); 3084 MPT_2_HOST32(fp0, FabricWWPN.High); 3085 MPT_2_HOST32(fp0, DiscoveredPortsCount); 3086 MPT_2_HOST32(fp0, MaxInitiators); 3087 } 3088 3089 void 3090 mpt2host_config_page_fc_port_1(CONFIG_PAGE_FC_PORT_1 *fp1) 3091 { 3092 3093 MPT_2_HOST32(fp1, Flags); 3094 MPT_2_HOST32(fp1, NoSEEPROMWWNN.Low); 3095 MPT_2_HOST32(fp1, NoSEEPROMWWNN.High); 3096 MPT_2_HOST32(fp1, NoSEEPROMWWPN.Low); 3097 MPT_2_HOST32(fp1, NoSEEPROMWWPN.High); 3098 } 3099 3100 void 3101 host2mpt_config_page_fc_port_1(CONFIG_PAGE_FC_PORT_1 *fp1) 3102 { 3103 3104 HOST_2_MPT32(fp1, Flags); 3105 HOST_2_MPT32(fp1, NoSEEPROMWWNN.Low); 3106 HOST_2_MPT32(fp1, NoSEEPROMWWNN.High); 3107 HOST_2_MPT32(fp1, NoSEEPROMWWPN.Low); 3108 HOST_2_MPT32(fp1, NoSEEPROMWWPN.High); 3109 } 3110 3111 void 3112 mpt2host_config_page_raid_vol_0(CONFIG_PAGE_RAID_VOL_0 *volp) 3113 { 3114 int i; 3115 3116 MPT_2_HOST16(volp, VolumeStatus.Reserved); 3117 MPT_2_HOST16(volp, VolumeSettings.Settings); 3118 MPT_2_HOST32(volp, MaxLBA); 3119 MPT_2_HOST32(volp, MaxLBAHigh); 3120 MPT_2_HOST32(volp, StripeSize); 3121 MPT_2_HOST32(volp, Reserved2); 3122 MPT_2_HOST32(volp, Reserved3); 3123 for (i = 0; i < MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX; i++) { 3124 MPT_2_HOST16(volp, PhysDisk[i].Reserved); 3125 } 3126 } 3127 3128 void 3129 mpt2host_config_page_raid_phys_disk_0(CONFIG_PAGE_RAID_PHYS_DISK_0 *rpd0) 3130 { 3131 3132 MPT_2_HOST32(rpd0, Reserved1); 3133 MPT_2_HOST16(rpd0, PhysDiskStatus.Reserved); 3134 MPT_2_HOST32(rpd0, MaxLBA); 3135 MPT_2_HOST16(rpd0, ErrorData.Reserved); 3136 MPT_2_HOST16(rpd0, ErrorData.ErrorCount); 3137 MPT_2_HOST16(rpd0, ErrorData.SmartCount); 3138 } 3139 3140 void 3141 mpt2host_mpi_raid_vol_indicator(MPI_RAID_VOL_INDICATOR *vi) 3142 { 3143 3144 MPT_2_HOST16(vi, TotalBlocks.High); 3145 MPT_2_HOST16(vi, TotalBlocks.Low); 3146 MPT_2_HOST16(vi, BlocksRemaining.High); 3147 MPT_2_HOST16(vi, BlocksRemaining.Low); 3148 } 3149 #endif 3150