1 /************************************************************************** 2 ** 3 ** $FreeBSD: src/sys/pci/ncr.c,v 1.155.2.3 2001/03/05 13:09:10 obrien Exp $ 4 ** $DragonFly: src/sys/dev/disk/ncr/ncr.c,v 1.11 2005/06/06 21:48:15 eirikn Exp $ 5 ** 6 ** Device driver for the NCR 53C8XX PCI-SCSI-Controller Family. 7 ** 8 **------------------------------------------------------------------------- 9 ** 10 ** Written for 386bsd and FreeBSD by 11 ** Wolfgang Stanglmeier <wolf@cologne.de> 12 ** Stefan Esser <se@mi.Uni-Koeln.de> 13 ** 14 **------------------------------------------------------------------------- 15 ** 16 ** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved. 17 ** 18 ** Redistribution and use in source and binary forms, with or without 19 ** modification, are permitted provided that the following conditions 20 ** are met: 21 ** 1. Redistributions of source code must retain the above copyright 22 ** notice, this list of conditions and the following disclaimer. 23 ** 2. Redistributions in binary form must reproduce the above copyright 24 ** notice, this list of conditions and the following disclaimer in the 25 ** documentation and/or other materials provided with the distribution. 26 ** 3. The name of the author may not be used to endorse or promote products 27 ** derived from this software without specific prior written permission. 28 ** 29 ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 30 ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 31 ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 32 ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 33 ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 34 ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 38 ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 ** 40 *************************************************************************** 41 */ 42 43 #define NCR_DATE "pl30 98/1/1" 44 45 #define NCR_VERSION (2) 46 #define MAX_UNITS (16) 47 48 #define NCR_GETCC_WITHMSG 49 50 #if (defined(__DragonFly__) || defined (__FreeBSD__)) && defined(_KERNEL) 51 #include "opt_ncr.h" 52 #endif 53 54 /*========================================================== 55 ** 56 ** Configuration and Debugging 57 ** 58 ** May be overwritten in <arch/conf/xxxx> 59 ** 60 **========================================================== 61 */ 62 63 /* 64 ** SCSI address of this device. 65 ** The boot routines should have set it. 66 ** If not, use this. 67 */ 68 69 #ifndef SCSI_NCR_MYADDR 70 #define SCSI_NCR_MYADDR (7) 71 #endif /* SCSI_NCR_MYADDR */ 72 73 /* 74 ** The default synchronous period factor 75 ** (0=asynchronous) 76 ** If maximum synchronous frequency is defined, use it instead. 77 */ 78 79 #ifndef SCSI_NCR_MAX_SYNC 80 81 #ifndef SCSI_NCR_DFLT_SYNC 82 #define SCSI_NCR_DFLT_SYNC (12) 83 #endif /* SCSI_NCR_DFLT_SYNC */ 84 85 #else 86 87 #if SCSI_NCR_MAX_SYNC == 0 88 #define SCSI_NCR_DFLT_SYNC 0 89 #else 90 #define SCSI_NCR_DFLT_SYNC (250000 / SCSI_NCR_MAX_SYNC) 91 #endif 92 93 #endif 94 95 /* 96 ** The minimal asynchronous pre-scaler period (ns) 97 ** Shall be 40. 98 */ 99 100 #ifndef SCSI_NCR_MIN_ASYNC 101 #define SCSI_NCR_MIN_ASYNC (40) 102 #endif /* SCSI_NCR_MIN_ASYNC */ 103 104 /* 105 ** The maximal bus with (in log2 byte) 106 ** (0=8 bit, 1=16 bit) 107 */ 108 109 #ifndef SCSI_NCR_MAX_WIDE 110 #define SCSI_NCR_MAX_WIDE (1) 111 #endif /* SCSI_NCR_MAX_WIDE */ 112 113 /*========================================================== 114 ** 115 ** Configuration and Debugging 116 ** 117 **========================================================== 118 */ 119 120 /* 121 ** Number of targets supported by the driver. 122 ** n permits target numbers 0..n-1. 123 ** Default is 7, meaning targets #0..#6. 124 ** #7 .. is myself. 125 */ 126 127 #define MAX_TARGET (16) 128 129 /* 130 ** Number of logic units supported by the driver. 131 ** n enables logic unit numbers 0..n-1. 132 ** The common SCSI devices require only 133 ** one lun, so take 1 as the default. 134 */ 135 136 #ifndef MAX_LUN 137 #define MAX_LUN (8) 138 #endif /* MAX_LUN */ 139 140 /* 141 ** The maximum number of jobs scheduled for starting. 142 ** There should be one slot per target, and one slot 143 ** for each tag of each target in use. 144 */ 145 146 #define MAX_START (256) 147 148 /* 149 ** The maximum number of segments a transfer is split into. 150 */ 151 152 #define MAX_SCATTER (33) 153 154 /* 155 ** The maximum transfer length (should be >= 64k). 156 ** MUST NOT be greater than (MAX_SCATTER-1) * PAGE_SIZE. 157 */ 158 159 #define MAX_SIZE ((MAX_SCATTER-1) * (long) PAGE_SIZE) 160 161 /* 162 ** other 163 */ 164 165 #define NCR_SNOOP_TIMEOUT (1000000) 166 167 /*========================================================== 168 ** 169 ** Include files 170 ** 171 **========================================================== 172 */ 173 174 #include <sys/param.h> 175 #include <sys/time.h> 176 177 #ifdef _KERNEL 178 #include <sys/systm.h> 179 #include <sys/malloc.h> 180 #include <sys/buf.h> 181 #include <sys/kernel.h> 182 #include <sys/sysctl.h> 183 #include <sys/bus.h> 184 #include <sys/thread2.h> 185 #include <machine/clock.h> 186 #include <machine/md_var.h> 187 #include <machine/bus.h> 188 #include <machine/resource.h> 189 #include <sys/rman.h> 190 #include <vm/vm.h> 191 #include <vm/pmap.h> 192 #include <vm/vm_extern.h> 193 #endif 194 195 #include <bus/pci/pcivar.h> 196 #include <bus/pci/pcireg.h> 197 #include "ncrreg.h" 198 199 #include <bus/cam/cam.h> 200 #include <bus/cam/cam_ccb.h> 201 #include <bus/cam/cam_sim.h> 202 #include <bus/cam/cam_xpt_sim.h> 203 #include <bus/cam/cam_debug.h> 204 205 #include <bus/cam/scsi/scsi_all.h> 206 #include <bus/cam/scsi/scsi_message.h> 207 208 /*========================================================== 209 ** 210 ** Debugging tags 211 ** 212 **========================================================== 213 */ 214 215 #define DEBUG_ALLOC (0x0001) 216 #define DEBUG_PHASE (0x0002) 217 #define DEBUG_POLL (0x0004) 218 #define DEBUG_QUEUE (0x0008) 219 #define DEBUG_RESULT (0x0010) 220 #define DEBUG_SCATTER (0x0020) 221 #define DEBUG_SCRIPT (0x0040) 222 #define DEBUG_TINY (0x0080) 223 #define DEBUG_TIMING (0x0100) 224 #define DEBUG_NEGO (0x0200) 225 #define DEBUG_TAGS (0x0400) 226 #define DEBUG_FREEZE (0x0800) 227 #define DEBUG_RESTART (0x1000) 228 229 /* 230 ** Enable/Disable debug messages. 231 ** Can be changed at runtime too. 232 */ 233 #ifdef SCSI_NCR_DEBUG 234 #define DEBUG_FLAGS ncr_debug 235 #else /* SCSI_NCR_DEBUG */ 236 #define SCSI_NCR_DEBUG 0 237 #define DEBUG_FLAGS 0 238 #endif /* SCSI_NCR_DEBUG */ 239 240 241 242 /*========================================================== 243 ** 244 ** assert () 245 ** 246 **========================================================== 247 ** 248 ** modified copy from 386bsd:/usr/include/sys/assert.h 249 ** 250 **---------------------------------------------------------- 251 */ 252 253 #ifdef DIAGNOSTIC 254 #define assert(expression) { \ 255 if (!(expression)) { \ 256 (void)printf("assertion \"%s\" failed: " \ 257 "file \"%s\", line %d\n", \ 258 #expression, __FILE__, __LINE__); \ 259 Debugger(""); \ 260 } \ 261 } 262 #else 263 #define assert(expression) { \ 264 if (!(expression)) { \ 265 (void)printf("assertion \"%s\" failed: " \ 266 "file \"%s\", line %d\n", \ 267 #expression, __FILE__, __LINE__); \ 268 } \ 269 } 270 #endif 271 272 /*========================================================== 273 ** 274 ** Access to the controller chip. 275 ** 276 **========================================================== 277 */ 278 279 #define INB(r) bus_space_read_1(np->bst, np->bsh, offsetof(struct ncr_reg, r)) 280 #define INW(r) bus_space_read_2(np->bst, np->bsh, offsetof(struct ncr_reg, r)) 281 #define INL(r) bus_space_read_4(np->bst, np->bsh, offsetof(struct ncr_reg, r)) 282 283 #define OUTB(r, val) bus_space_write_1(np->bst, np->bsh, \ 284 offsetof(struct ncr_reg, r), val) 285 #define OUTW(r, val) bus_space_write_2(np->bst, np->bsh, \ 286 offsetof(struct ncr_reg, r), val) 287 #define OUTL(r, val) bus_space_write_4(np->bst, np->bsh, \ 288 offsetof(struct ncr_reg, r), val) 289 #define OUTL_OFF(o, val) bus_space_write_4(np->bst, np->bsh, o, val) 290 291 #define INB_OFF(o) bus_space_read_1(np->bst, np->bsh, o) 292 #define INW_OFF(o) bus_space_read_2(np->bst, np->bsh, o) 293 #define INL_OFF(o) bus_space_read_4(np->bst, np->bsh, o) 294 295 #define READSCRIPT_OFF(base, off) \ 296 (base ? *((volatile u_int32_t *)((volatile char *)base + (off))) : \ 297 bus_space_read_4(np->bst2, np->bsh2, off)) 298 299 #define WRITESCRIPT_OFF(base, off, val) \ 300 do { \ 301 if (base) \ 302 *((volatile u_int32_t *) \ 303 ((volatile char *)base + (off))) = (val); \ 304 else \ 305 bus_space_write_4(np->bst2, np->bsh2, off, val); \ 306 } while (0) 307 308 #define READSCRIPT(r) \ 309 READSCRIPT_OFF(np->script, offsetof(struct script, r)) 310 311 #define WRITESCRIPT(r, val) \ 312 WRITESCRIPT_OFF(np->script, offsetof(struct script, r), val) 313 314 /* 315 ** Set bit field ON, OFF 316 */ 317 318 #define OUTONB(r, m) OUTB(r, INB(r) | (m)) 319 #define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) 320 #define OUTONW(r, m) OUTW(r, INW(r) | (m)) 321 #define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) 322 #define OUTONL(r, m) OUTL(r, INL(r) | (m)) 323 #define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) 324 325 /*========================================================== 326 ** 327 ** Command control block states. 328 ** 329 **========================================================== 330 */ 331 332 #define HS_IDLE (0) 333 #define HS_BUSY (1) 334 #define HS_NEGOTIATE (2) /* sync/wide data transfer*/ 335 #define HS_DISCONNECT (3) /* Disconnected by target */ 336 337 #define HS_COMPLETE (4) 338 #define HS_SEL_TIMEOUT (5) /* Selection timeout */ 339 #define HS_RESET (6) /* SCSI reset */ 340 #define HS_ABORTED (7) /* Transfer aborted */ 341 #define HS_TIMEOUT (8) /* Software timeout */ 342 #define HS_FAIL (9) /* SCSI or PCI bus errors */ 343 #define HS_UNEXPECTED (10) /* Unexpected disconnect */ 344 #define HS_STALL (11) /* QUEUE FULL or BUSY */ 345 346 #define HS_DONEMASK (0xfc) 347 348 /*========================================================== 349 ** 350 ** Software Interrupt Codes 351 ** 352 **========================================================== 353 */ 354 355 #define SIR_SENSE_RESTART (1) 356 #define SIR_SENSE_FAILED (2) 357 #define SIR_STALL_RESTART (3) 358 #define SIR_STALL_QUEUE (4) 359 #define SIR_NEGO_SYNC (5) 360 #define SIR_NEGO_WIDE (6) 361 #define SIR_NEGO_FAILED (7) 362 #define SIR_NEGO_PROTO (8) 363 #define SIR_REJECT_RECEIVED (9) 364 #define SIR_REJECT_SENT (10) 365 #define SIR_IGN_RESIDUE (11) 366 #define SIR_MISSING_SAVE (12) 367 #define SIR_MAX (12) 368 369 /*========================================================== 370 ** 371 ** Extended error codes. 372 ** xerr_status field of struct nccb. 373 ** 374 **========================================================== 375 */ 376 377 #define XE_OK (0) 378 #define XE_EXTRA_DATA (1) /* unexpected data phase */ 379 #define XE_BAD_PHASE (2) /* illegal phase (4/5) */ 380 381 /*========================================================== 382 ** 383 ** Negotiation status. 384 ** nego_status field of struct nccb. 385 ** 386 **========================================================== 387 */ 388 389 #define NS_SYNC (1) 390 #define NS_WIDE (2) 391 392 /*========================================================== 393 ** 394 ** XXX These are no longer used. Remove once the 395 ** script is updated. 396 ** "Special features" of targets. 397 ** quirks field of struct tcb. 398 ** actualquirks field of struct nccb. 399 ** 400 **========================================================== 401 */ 402 403 #define QUIRK_AUTOSAVE (0x01) 404 #define QUIRK_NOMSG (0x02) 405 #define QUIRK_NOSYNC (0x10) 406 #define QUIRK_NOWIDE16 (0x20) 407 #define QUIRK_NOTAGS (0x40) 408 #define QUIRK_UPDATE (0x80) 409 410 /*========================================================== 411 ** 412 ** Misc. 413 ** 414 **========================================================== 415 */ 416 417 #define CCB_MAGIC (0xf2691ad2) 418 #define MAX_TAGS (32) /* hard limit */ 419 420 /*========================================================== 421 ** 422 ** OS dependencies. 423 ** 424 **========================================================== 425 */ 426 427 #define PRINT_ADDR(ccb) xpt_print_path((ccb)->ccb_h.path) 428 429 /*========================================================== 430 ** 431 ** Declaration of structs. 432 ** 433 **========================================================== 434 */ 435 436 struct tcb; 437 struct lcb; 438 struct nccb; 439 struct ncb; 440 struct script; 441 442 typedef struct ncb * ncb_p; 443 typedef struct tcb * tcb_p; 444 typedef struct lcb * lcb_p; 445 typedef struct nccb * nccb_p; 446 447 struct link { 448 ncrcmd l_cmd; 449 ncrcmd l_paddr; 450 }; 451 452 struct usrcmd { 453 u_long target; 454 u_long lun; 455 u_long data; 456 u_long cmd; 457 }; 458 459 #define UC_SETSYNC 10 460 #define UC_SETTAGS 11 461 #define UC_SETDEBUG 12 462 #define UC_SETORDER 13 463 #define UC_SETWIDE 14 464 #define UC_SETFLAG 15 465 466 #define UF_TRACE (0x01) 467 468 /*--------------------------------------- 469 ** 470 ** Timestamps for profiling 471 ** 472 **--------------------------------------- 473 */ 474 475 /* Type of the kernel variable `ticks'. XXX should be declared with the var. */ 476 typedef int ticks_t; 477 478 struct tstamp { 479 ticks_t start; 480 ticks_t end; 481 ticks_t select; 482 ticks_t command; 483 ticks_t data; 484 ticks_t status; 485 ticks_t disconnect; 486 }; 487 488 /* 489 ** profiling data (per device) 490 */ 491 492 struct profile { 493 u_long num_trans; 494 u_long num_bytes; 495 u_long num_disc; 496 u_long num_break; 497 u_long num_int; 498 u_long num_fly; 499 u_long ms_setup; 500 u_long ms_data; 501 u_long ms_disc; 502 u_long ms_post; 503 }; 504 505 /*========================================================== 506 ** 507 ** Declaration of structs: target control block 508 ** 509 **========================================================== 510 */ 511 512 #define NCR_TRANS_CUR 0x01 /* Modify current neogtiation status */ 513 #define NCR_TRANS_ACTIVE 0x03 /* Assume this is the active target */ 514 #define NCR_TRANS_GOAL 0x04 /* Modify negotiation goal */ 515 #define NCR_TRANS_USER 0x08 /* Modify user negotiation settings */ 516 517 struct ncr_transinfo { 518 u_int8_t width; 519 u_int8_t period; 520 u_int8_t offset; 521 }; 522 523 struct ncr_target_tinfo { 524 /* Hardware version of our sync settings */ 525 u_int8_t disc_tag; 526 #define NCR_CUR_DISCENB 0x01 527 #define NCR_CUR_TAGENB 0x02 528 #define NCR_USR_DISCENB 0x04 529 #define NCR_USR_TAGENB 0x08 530 u_int8_t sval; 531 struct ncr_transinfo current; 532 struct ncr_transinfo goal; 533 struct ncr_transinfo user; 534 /* Hardware version of our wide settings */ 535 u_int8_t wval; 536 }; 537 538 struct tcb { 539 /* 540 ** during reselection the ncr jumps to this point 541 ** with SFBR set to the encoded target number 542 ** with bit 7 set. 543 ** if it's not this target, jump to the next. 544 ** 545 ** JUMP IF (SFBR != #target#) 546 ** @(next tcb) 547 */ 548 549 struct link jump_tcb; 550 551 /* 552 ** load the actual values for the sxfer and the scntl3 553 ** register (sync/wide mode). 554 ** 555 ** SCR_COPY (1); 556 ** @(sval field of this tcb) 557 ** @(sxfer register) 558 ** SCR_COPY (1); 559 ** @(wval field of this tcb) 560 ** @(scntl3 register) 561 */ 562 563 ncrcmd getscr[6]; 564 565 /* 566 ** if next message is "identify" 567 ** then load the message to SFBR, 568 ** else load 0 to SFBR. 569 ** 570 ** CALL 571 ** <RESEL_LUN> 572 */ 573 574 struct link call_lun; 575 576 /* 577 ** now look for the right lun. 578 ** 579 ** JUMP 580 ** @(first nccb of this lun) 581 */ 582 583 struct link jump_lcb; 584 585 /* 586 ** pointer to interrupted getcc nccb 587 */ 588 589 nccb_p hold_cp; 590 591 /* 592 ** pointer to nccb used for negotiating. 593 ** Avoid to start a nego for all queued commands 594 ** when tagged command queuing is enabled. 595 */ 596 597 nccb_p nego_cp; 598 599 /* 600 ** statistical data 601 */ 602 603 u_long transfers; 604 u_long bytes; 605 606 /* 607 ** user settable limits for sync transfer 608 ** and tagged commands. 609 */ 610 611 struct ncr_target_tinfo tinfo; 612 613 /* 614 ** the lcb's of this tcb 615 */ 616 617 lcb_p lp[MAX_LUN]; 618 }; 619 620 /*========================================================== 621 ** 622 ** Declaration of structs: lun control block 623 ** 624 **========================================================== 625 */ 626 627 struct lcb { 628 /* 629 ** during reselection the ncr jumps to this point 630 ** with SFBR set to the "Identify" message. 631 ** if it's not this lun, jump to the next. 632 ** 633 ** JUMP IF (SFBR != #lun#) 634 ** @(next lcb of this target) 635 */ 636 637 struct link jump_lcb; 638 639 /* 640 ** if next message is "simple tag", 641 ** then load the tag to SFBR, 642 ** else load 0 to SFBR. 643 ** 644 ** CALL 645 ** <RESEL_TAG> 646 */ 647 648 struct link call_tag; 649 650 /* 651 ** now look for the right nccb. 652 ** 653 ** JUMP 654 ** @(first nccb of this lun) 655 */ 656 657 struct link jump_nccb; 658 659 /* 660 ** start of the nccb chain 661 */ 662 663 nccb_p next_nccb; 664 665 /* 666 ** Control of tagged queueing 667 */ 668 669 u_char reqnccbs; 670 u_char reqlink; 671 u_char actlink; 672 u_char usetags; 673 u_char lasttag; 674 }; 675 676 /*========================================================== 677 ** 678 ** Declaration of structs: COMMAND control block 679 ** 680 **========================================================== 681 ** 682 ** This substructure is copied from the nccb to a 683 ** global address after selection (or reselection) 684 ** and copied back before disconnect. 685 ** 686 ** These fields are accessible to the script processor. 687 ** 688 **---------------------------------------------------------- 689 */ 690 691 struct head { 692 /* 693 ** Execution of a nccb starts at this point. 694 ** It's a jump to the "SELECT" label 695 ** of the script. 696 ** 697 ** After successful selection the script 698 ** processor overwrites it with a jump to 699 ** the IDLE label of the script. 700 */ 701 702 struct link launch; 703 704 /* 705 ** Saved data pointer. 706 ** Points to the position in the script 707 ** responsible for the actual transfer 708 ** of data. 709 ** It's written after reception of a 710 ** "SAVE_DATA_POINTER" message. 711 ** The goalpointer points after 712 ** the last transfer command. 713 */ 714 715 u_int32_t savep; 716 u_int32_t lastp; 717 u_int32_t goalp; 718 719 /* 720 ** The virtual address of the nccb 721 ** containing this header. 722 */ 723 724 nccb_p cp; 725 726 /* 727 ** space for some timestamps to gather 728 ** profiling data about devices and this driver. 729 */ 730 731 struct tstamp stamp; 732 733 /* 734 ** status fields. 735 */ 736 737 u_char status[8]; 738 }; 739 740 /* 741 ** The status bytes are used by the host and the script processor. 742 ** 743 ** The first four byte are copied to the scratchb register 744 ** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect, 745 ** and copied back just after disconnecting. 746 ** Inside the script the XX_REG are used. 747 ** 748 ** The last four bytes are used inside the script by "COPY" commands. 749 ** Because source and destination must have the same alignment 750 ** in a longword, the fields HAVE to be at the choosen offsets. 751 ** xerr_st (4) 0 (0x34) scratcha 752 ** sync_st (5) 1 (0x05) sxfer 753 ** wide_st (7) 3 (0x03) scntl3 754 */ 755 756 /* 757 ** First four bytes (script) 758 */ 759 #define QU_REG scr0 760 #define HS_REG scr1 761 #define HS_PRT nc_scr1 762 #define SS_REG scr2 763 #define PS_REG scr3 764 765 /* 766 ** First four bytes (host) 767 */ 768 #define actualquirks phys.header.status[0] 769 #define host_status phys.header.status[1] 770 #define s_status phys.header.status[2] 771 #define parity_status phys.header.status[3] 772 773 /* 774 ** Last four bytes (script) 775 */ 776 #define xerr_st header.status[4] /* MUST be ==0 mod 4 */ 777 #define sync_st header.status[5] /* MUST be ==1 mod 4 */ 778 #define nego_st header.status[6] 779 #define wide_st header.status[7] /* MUST be ==3 mod 4 */ 780 781 /* 782 ** Last four bytes (host) 783 */ 784 #define xerr_status phys.xerr_st 785 #define sync_status phys.sync_st 786 #define nego_status phys.nego_st 787 #define wide_status phys.wide_st 788 789 /*========================================================== 790 ** 791 ** Declaration of structs: Data structure block 792 ** 793 **========================================================== 794 ** 795 ** During execution of a nccb by the script processor, 796 ** the DSA (data structure address) register points 797 ** to this substructure of the nccb. 798 ** This substructure contains the header with 799 ** the script-processor-changable data and 800 ** data blocks for the indirect move commands. 801 ** 802 **---------------------------------------------------------- 803 */ 804 805 struct dsb { 806 807 /* 808 ** Header. 809 ** Has to be the first entry, 810 ** because it's jumped to by the 811 ** script processor 812 */ 813 814 struct head header; 815 816 /* 817 ** Table data for Script 818 */ 819 820 struct scr_tblsel select; 821 struct scr_tblmove smsg ; 822 struct scr_tblmove smsg2 ; 823 struct scr_tblmove cmd ; 824 struct scr_tblmove scmd ; 825 struct scr_tblmove sense ; 826 struct scr_tblmove data [MAX_SCATTER]; 827 }; 828 829 /*========================================================== 830 ** 831 ** Declaration of structs: Command control block. 832 ** 833 **========================================================== 834 ** 835 ** During execution of a nccb by the script processor, 836 ** the DSA (data structure address) register points 837 ** to this substructure of the nccb. 838 ** This substructure contains the header with 839 ** the script-processor-changable data and then 840 ** data blocks for the indirect move commands. 841 ** 842 **---------------------------------------------------------- 843 */ 844 845 846 struct nccb { 847 /* 848 ** This filler ensures that the global header is 849 ** cache line size aligned. 850 */ 851 ncrcmd filler[4]; 852 853 /* 854 ** during reselection the ncr jumps to this point. 855 ** If a "SIMPLE_TAG" message was received, 856 ** then SFBR is set to the tag. 857 ** else SFBR is set to 0 858 ** If looking for another tag, jump to the next nccb. 859 ** 860 ** JUMP IF (SFBR != #TAG#) 861 ** @(next nccb of this lun) 862 */ 863 864 struct link jump_nccb; 865 866 /* 867 ** After execution of this call, the return address 868 ** (in the TEMP register) points to the following 869 ** data structure block. 870 ** So copy it to the DSA register, and start 871 ** processing of this data structure. 872 ** 873 ** CALL 874 ** <RESEL_TMP> 875 */ 876 877 struct link call_tmp; 878 879 /* 880 ** This is the data structure which is 881 ** to be executed by the script processor. 882 */ 883 884 struct dsb phys; 885 886 /* 887 ** If a data transfer phase is terminated too early 888 ** (after reception of a message (i.e. DISCONNECT)), 889 ** we have to prepare a mini script to transfer 890 ** the rest of the data. 891 */ 892 893 ncrcmd patch[8]; 894 895 /* 896 ** The general SCSI driver provides a 897 ** pointer to a control block. 898 */ 899 900 union ccb *ccb; 901 902 /* 903 ** We prepare a message to be sent after selection, 904 ** and a second one to be sent after getcc selection. 905 ** Contents are IDENTIFY and SIMPLE_TAG. 906 ** While negotiating sync or wide transfer, 907 ** a SDTM or WDTM message is appended. 908 */ 909 910 u_char scsi_smsg [8]; 911 u_char scsi_smsg2[8]; 912 913 /* 914 ** Lock this nccb. 915 ** Flag is used while looking for a free nccb. 916 */ 917 918 u_long magic; 919 920 /* 921 ** Physical address of this instance of nccb 922 */ 923 924 u_long p_nccb; 925 926 /* 927 ** Completion time out for this job. 928 ** It's set to time of start + allowed number of seconds. 929 */ 930 931 time_t tlimit; 932 933 /* 934 ** All nccbs of one hostadapter are chained. 935 */ 936 937 nccb_p link_nccb; 938 939 /* 940 ** All nccbs of one target/lun are chained. 941 */ 942 943 nccb_p next_nccb; 944 945 /* 946 ** Sense command 947 */ 948 949 u_char sensecmd[6]; 950 951 /* 952 ** Tag for this transfer. 953 ** It's patched into jump_nccb. 954 ** If it's not zero, a SIMPLE_TAG 955 ** message is included in smsg. 956 */ 957 958 u_char tag; 959 }; 960 961 #define CCB_PHYS(cp,lbl) (cp->p_nccb + offsetof(struct nccb, lbl)) 962 963 /*========================================================== 964 ** 965 ** Declaration of structs: NCR device descriptor 966 ** 967 **========================================================== 968 */ 969 970 struct ncb { 971 /* 972 ** The global header. 973 ** Accessible to both the host and the 974 ** script-processor. 975 ** We assume it is cache line size aligned. 976 */ 977 struct head header; 978 979 int unit; 980 981 /*----------------------------------------------- 982 ** Scripts .. 983 **----------------------------------------------- 984 ** 985 ** During reselection the ncr jumps to this point. 986 ** The SFBR register is loaded with the encoded target id. 987 ** 988 ** Jump to the first target. 989 ** 990 ** JUMP 991 ** @(next tcb) 992 */ 993 struct link jump_tcb; 994 995 /*----------------------------------------------- 996 ** Configuration .. 997 **----------------------------------------------- 998 ** 999 ** virtual and physical addresses 1000 ** of the 53c810 chip. 1001 */ 1002 int reg_rid; 1003 struct resource *reg_res; 1004 bus_space_tag_t bst; 1005 bus_space_handle_t bsh; 1006 1007 int sram_rid; 1008 struct resource *sram_res; 1009 bus_space_tag_t bst2; 1010 bus_space_handle_t bsh2; 1011 1012 struct resource *irq_res; 1013 void *irq_handle; 1014 1015 /* 1016 ** Scripts instance virtual address. 1017 */ 1018 struct script *script; 1019 struct scripth *scripth; 1020 1021 /* 1022 ** Scripts instance physical address. 1023 */ 1024 u_long p_script; 1025 u_long p_scripth; 1026 1027 /* 1028 ** The SCSI address of the host adapter. 1029 */ 1030 u_char myaddr; 1031 1032 /* 1033 ** timing parameters 1034 */ 1035 u_char minsync; /* Minimum sync period factor */ 1036 u_char maxsync; /* Maximum sync period factor */ 1037 u_char maxoffs; /* Max scsi offset */ 1038 u_char clock_divn; /* Number of clock divisors */ 1039 u_long clock_khz; /* SCSI clock frequency in KHz */ 1040 u_long features; /* Chip features map */ 1041 u_char multiplier; /* Clock multiplier (1,2,4) */ 1042 1043 u_char maxburst; /* log base 2 of dwords burst */ 1044 1045 /* 1046 ** BIOS supplied PCI bus options 1047 */ 1048 u_char rv_scntl3; 1049 u_char rv_dcntl; 1050 u_char rv_dmode; 1051 u_char rv_ctest3; 1052 u_char rv_ctest4; 1053 u_char rv_ctest5; 1054 u_char rv_gpcntl; 1055 u_char rv_stest2; 1056 1057 /*----------------------------------------------- 1058 ** CAM SIM information for this instance 1059 **----------------------------------------------- 1060 */ 1061 1062 struct cam_sim *sim; 1063 struct cam_path *path; 1064 1065 /*----------------------------------------------- 1066 ** Job control 1067 **----------------------------------------------- 1068 ** 1069 ** Commands from user 1070 */ 1071 struct usrcmd user; 1072 1073 /* 1074 ** Target data 1075 */ 1076 struct tcb target[MAX_TARGET]; 1077 1078 /* 1079 ** Start queue. 1080 */ 1081 u_int32_t squeue [MAX_START]; 1082 u_short squeueput; 1083 1084 /* 1085 ** Timeout handler 1086 */ 1087 time_t heartbeat; 1088 u_short ticks; 1089 u_short latetime; 1090 time_t lasttime; 1091 struct callout timeout_ch; 1092 1093 /*----------------------------------------------- 1094 ** Debug and profiling 1095 **----------------------------------------------- 1096 ** 1097 ** register dump 1098 */ 1099 struct ncr_reg regdump; 1100 time_t regtime; 1101 1102 /* 1103 ** Profiling data 1104 */ 1105 struct profile profile; 1106 u_long disc_phys; 1107 u_long disc_ref; 1108 1109 /* 1110 ** Head of list of all nccbs for this controller. 1111 */ 1112 nccb_p link_nccb; 1113 1114 /* 1115 ** message buffers. 1116 ** Should be longword aligned, 1117 ** because they're written with a 1118 ** COPY script command. 1119 */ 1120 u_char msgout[8]; 1121 u_char msgin [8]; 1122 u_int32_t lastmsg; 1123 1124 /* 1125 ** Buffer for STATUS_IN phase. 1126 */ 1127 u_char scratch; 1128 1129 /* 1130 ** controller chip dependent maximal transfer width. 1131 */ 1132 u_char maxwide; 1133 1134 #ifdef NCR_IOMAPPED 1135 /* 1136 ** address of the ncr control registers in io space 1137 */ 1138 pci_port_t port; 1139 #endif 1140 }; 1141 1142 #define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl)) 1143 #define NCB_SCRIPTH_PHYS(np,lbl) (np->p_scripth + offsetof (struct scripth,lbl)) 1144 1145 /*========================================================== 1146 ** 1147 ** 1148 ** Script for NCR-Processor. 1149 ** 1150 ** Use ncr_script_fill() to create the variable parts. 1151 ** Use ncr_script_copy_and_bind() to make a copy and 1152 ** bind to physical addresses. 1153 ** 1154 ** 1155 **========================================================== 1156 ** 1157 ** We have to know the offsets of all labels before 1158 ** we reach them (for forward jumps). 1159 ** Therefore we declare a struct here. 1160 ** If you make changes inside the script, 1161 ** DONT FORGET TO CHANGE THE LENGTHS HERE! 1162 ** 1163 **---------------------------------------------------------- 1164 */ 1165 1166 /* 1167 ** Script fragments which are loaded into the on-board RAM 1168 ** of 825A, 875 and 895 chips. 1169 */ 1170 struct script { 1171 ncrcmd start [ 7]; 1172 ncrcmd start0 [ 2]; 1173 ncrcmd start1 [ 3]; 1174 ncrcmd startpos [ 1]; 1175 ncrcmd trysel [ 8]; 1176 ncrcmd skip [ 8]; 1177 ncrcmd skip2 [ 3]; 1178 ncrcmd idle [ 2]; 1179 ncrcmd select [ 18]; 1180 ncrcmd prepare [ 4]; 1181 ncrcmd loadpos [ 14]; 1182 ncrcmd prepare2 [ 24]; 1183 ncrcmd setmsg [ 5]; 1184 ncrcmd clrack [ 2]; 1185 ncrcmd dispatch [ 33]; 1186 ncrcmd no_data [ 17]; 1187 ncrcmd checkatn [ 10]; 1188 ncrcmd command [ 15]; 1189 ncrcmd status [ 27]; 1190 ncrcmd msg_in [ 26]; 1191 ncrcmd msg_bad [ 6]; 1192 ncrcmd complete [ 13]; 1193 ncrcmd cleanup [ 12]; 1194 ncrcmd cleanup0 [ 9]; 1195 ncrcmd signal [ 12]; 1196 ncrcmd save_dp [ 5]; 1197 ncrcmd restore_dp [ 5]; 1198 ncrcmd disconnect [ 12]; 1199 ncrcmd disconnect0 [ 5]; 1200 ncrcmd disconnect1 [ 23]; 1201 ncrcmd msg_out [ 9]; 1202 ncrcmd msg_out_done [ 7]; 1203 ncrcmd badgetcc [ 6]; 1204 ncrcmd reselect [ 8]; 1205 ncrcmd reselect1 [ 8]; 1206 ncrcmd reselect2 [ 8]; 1207 ncrcmd resel_tmp [ 5]; 1208 ncrcmd resel_lun [ 18]; 1209 ncrcmd resel_tag [ 24]; 1210 ncrcmd data_in [MAX_SCATTER * 4 + 7]; 1211 ncrcmd data_out [MAX_SCATTER * 4 + 7]; 1212 }; 1213 1214 /* 1215 ** Script fragments which stay in main memory for all chips. 1216 */ 1217 struct scripth { 1218 ncrcmd tryloop [MAX_START*5+2]; 1219 ncrcmd msg_parity [ 6]; 1220 ncrcmd msg_reject [ 8]; 1221 ncrcmd msg_ign_residue [ 32]; 1222 ncrcmd msg_extended [ 18]; 1223 ncrcmd msg_ext_2 [ 18]; 1224 ncrcmd msg_wdtr [ 27]; 1225 ncrcmd msg_ext_3 [ 18]; 1226 ncrcmd msg_sdtr [ 27]; 1227 ncrcmd msg_out_abort [ 10]; 1228 ncrcmd getcc [ 4]; 1229 ncrcmd getcc1 [ 5]; 1230 #ifdef NCR_GETCC_WITHMSG 1231 ncrcmd getcc2 [ 29]; 1232 #else 1233 ncrcmd getcc2 [ 14]; 1234 #endif 1235 ncrcmd getcc3 [ 6]; 1236 ncrcmd aborttag [ 4]; 1237 ncrcmd abort [ 22]; 1238 ncrcmd snooptest [ 9]; 1239 ncrcmd snoopend [ 2]; 1240 }; 1241 1242 /*========================================================== 1243 ** 1244 ** 1245 ** Function headers. 1246 ** 1247 ** 1248 **========================================================== 1249 */ 1250 1251 #ifdef _KERNEL 1252 static nccb_p ncr_alloc_nccb (ncb_p np, u_long target, u_long lun); 1253 static void ncr_complete (ncb_p np, nccb_p cp); 1254 static int ncr_delta (int * from, int * to); 1255 static void ncr_exception (ncb_p np); 1256 static void ncr_free_nccb (ncb_p np, nccb_p cp); 1257 static void ncr_freeze_devq (ncb_p np, struct cam_path *path); 1258 static void ncr_selectclock (ncb_p np, u_char scntl3); 1259 static void ncr_getclock (ncb_p np, u_char multiplier); 1260 static nccb_p ncr_get_nccb (ncb_p np, u_long t,u_long l); 1261 #if 0 1262 static u_int32_t ncr_info (int unit); 1263 #endif 1264 static void ncr_init (ncb_p np, char * msg, u_long code); 1265 static void ncr_intr (void *vnp); 1266 static void ncr_int_ma (ncb_p np, u_char dstat); 1267 static void ncr_int_sir (ncb_p np); 1268 static void ncr_int_sto (ncb_p np); 1269 #if 0 1270 static void ncr_min_phys (struct buf *bp); 1271 #endif 1272 static void ncr_poll (struct cam_sim *sim); 1273 static void ncb_profile (ncb_p np, nccb_p cp); 1274 static void ncr_script_copy_and_bind 1275 (ncb_p np, ncrcmd *src, ncrcmd *dst, int len); 1276 static void ncr_script_fill (struct script * scr, struct scripth *scrh); 1277 static int ncr_scatter (struct dsb* phys, vm_offset_t vaddr, 1278 vm_size_t datalen); 1279 static void ncr_getsync (ncb_p np, u_char sfac, u_char *fakp, 1280 u_char *scntl3p); 1281 static void ncr_setsync (ncb_p np, nccb_p cp,u_char scntl3,u_char sxfer, 1282 u_char period); 1283 static void ncr_setwide (ncb_p np, nccb_p cp, u_char wide, u_char ack); 1284 static int ncr_show_msg (u_char * msg); 1285 static int ncr_snooptest (ncb_p np); 1286 static void ncr_action (struct cam_sim *sim, union ccb *ccb); 1287 static void ncr_timeout (void *arg); 1288 static void ncr_wakeup (ncb_p np, u_long code); 1289 1290 static int ncr_probe (device_t dev); 1291 static int ncr_attach (device_t dev); 1292 1293 #endif /* _KERNEL */ 1294 1295 /*========================================================== 1296 ** 1297 ** 1298 ** Global static data. 1299 ** 1300 ** 1301 **========================================================== 1302 */ 1303 1304 1305 /* 1306 * $FreeBSD: src/sys/pci/ncr.c,v 1.155.2.3 2001/03/05 13:09:10 obrien Exp $ 1307 */ 1308 static const u_long ncr_version = NCR_VERSION * 11 1309 + (u_long) sizeof (struct ncb) * 7 1310 + (u_long) sizeof (struct nccb) * 5 1311 + (u_long) sizeof (struct lcb) * 3 1312 + (u_long) sizeof (struct tcb) * 2; 1313 1314 #ifdef _KERNEL 1315 1316 static int ncr_debug = SCSI_NCR_DEBUG; 1317 SYSCTL_INT(_debug, OID_AUTO, ncr_debug, CTLFLAG_RW, &ncr_debug, 0, ""); 1318 1319 static int ncr_cache; /* to be aligned _NOT_ static */ 1320 1321 /*========================================================== 1322 ** 1323 ** 1324 ** Global static data: auto configure 1325 ** 1326 ** 1327 **========================================================== 1328 */ 1329 1330 #define NCR_810_ID (0x00011000ul) 1331 #define NCR_815_ID (0x00041000ul) 1332 #define NCR_820_ID (0x00021000ul) 1333 #define NCR_825_ID (0x00031000ul) 1334 #define NCR_860_ID (0x00061000ul) 1335 #define NCR_875_ID (0x000f1000ul) 1336 #define NCR_875_ID2 (0x008f1000ul) 1337 #define NCR_885_ID (0x000d1000ul) 1338 #define NCR_895_ID (0x000c1000ul) 1339 #define NCR_896_ID (0x000b1000ul) 1340 #define NCR_895A_ID (0x00121000ul) 1341 #define NCR_1510D_ID (0x000a1000ul) 1342 1343 1344 static char *ncr_name (ncb_p np) 1345 { 1346 static char name[10]; 1347 snprintf(name, sizeof(name), "ncr%d", np->unit); 1348 return (name); 1349 } 1350 1351 /*========================================================== 1352 ** 1353 ** 1354 ** Scripts for NCR-Processor. 1355 ** 1356 ** Use ncr_script_bind for binding to physical addresses. 1357 ** 1358 ** 1359 **========================================================== 1360 ** 1361 ** NADDR generates a reference to a field of the controller data. 1362 ** PADDR generates a reference to another part of the script. 1363 ** RADDR generates a reference to a script processor register. 1364 ** FADDR generates a reference to a script processor register 1365 ** with offset. 1366 ** 1367 **---------------------------------------------------------- 1368 */ 1369 1370 #define RELOC_SOFTC 0x40000000 1371 #define RELOC_LABEL 0x50000000 1372 #define RELOC_REGISTER 0x60000000 1373 #define RELOC_KVAR 0x70000000 1374 #define RELOC_LABELH 0x80000000 1375 #define RELOC_MASK 0xf0000000 1376 1377 #define NADDR(label) (RELOC_SOFTC | offsetof(struct ncb, label)) 1378 #define PADDR(label) (RELOC_LABEL | offsetof(struct script, label)) 1379 #define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label)) 1380 #define RADDR(label) (RELOC_REGISTER | REG(label)) 1381 #define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs))) 1382 #define KVAR(which) (RELOC_KVAR | (which)) 1383 1384 #define KVAR_SECOND (0) 1385 #define KVAR_TICKS (1) 1386 #define KVAR_NCR_CACHE (2) 1387 1388 #define SCRIPT_KVAR_FIRST (0) 1389 #define SCRIPT_KVAR_LAST (3) 1390 1391 /* 1392 * Kernel variables referenced in the scripts. 1393 * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY. 1394 */ 1395 static void *script_kvars[] = 1396 { &time_second, &ticks, &ncr_cache }; 1397 1398 static struct script script0 = { 1399 /*--------------------------< START >-----------------------*/ { 1400 /* 1401 ** Claim to be still alive ... 1402 */ 1403 SCR_COPY (sizeof (((struct ncb *)0)->heartbeat)), 1404 KVAR (KVAR_SECOND), 1405 NADDR (heartbeat), 1406 /* 1407 ** Make data structure address invalid. 1408 ** clear SIGP. 1409 */ 1410 SCR_LOAD_REG (dsa, 0xff), 1411 0, 1412 SCR_FROM_REG (ctest2), 1413 0, 1414 }/*-------------------------< START0 >----------------------*/,{ 1415 /* 1416 ** Hook for interrupted GetConditionCode. 1417 ** Will be patched to ... IFTRUE by 1418 ** the interrupt handler. 1419 */ 1420 SCR_INT ^ IFFALSE (0), 1421 SIR_SENSE_RESTART, 1422 1423 }/*-------------------------< START1 >----------------------*/,{ 1424 /* 1425 ** Hook for stalled start queue. 1426 ** Will be patched to IFTRUE by the interrupt handler. 1427 */ 1428 SCR_INT ^ IFFALSE (0), 1429 SIR_STALL_RESTART, 1430 /* 1431 ** Then jump to a certain point in tryloop. 1432 ** Due to the lack of indirect addressing the code 1433 ** is self modifying here. 1434 */ 1435 SCR_JUMP, 1436 }/*-------------------------< STARTPOS >--------------------*/,{ 1437 PADDRH(tryloop), 1438 1439 }/*-------------------------< TRYSEL >----------------------*/,{ 1440 /* 1441 ** Now: 1442 ** DSA: Address of a Data Structure 1443 ** or Address of the IDLE-Label. 1444 ** 1445 ** TEMP: Address of a script, which tries to 1446 ** start the NEXT entry. 1447 ** 1448 ** Save the TEMP register into the SCRATCHA register. 1449 ** Then copy the DSA to TEMP and RETURN. 1450 ** This is kind of an indirect jump. 1451 ** (The script processor has NO stack, so the 1452 ** CALL is actually a jump and link, and the 1453 ** RETURN is an indirect jump.) 1454 ** 1455 ** If the slot was empty, DSA contains the address 1456 ** of the IDLE part of this script. The processor 1457 ** jumps to IDLE and waits for a reselect. 1458 ** It will wake up and try the same slot again 1459 ** after the SIGP bit becomes set by the host. 1460 ** 1461 ** If the slot was not empty, DSA contains 1462 ** the address of the phys-part of a nccb. 1463 ** The processor jumps to this address. 1464 ** phys starts with head, 1465 ** head starts with launch, 1466 ** so actually the processor jumps to 1467 ** the lauch part. 1468 ** If the entry is scheduled for execution, 1469 ** then launch contains a jump to SELECT. 1470 ** If it's not scheduled, it contains a jump to IDLE. 1471 */ 1472 SCR_COPY (4), 1473 RADDR (temp), 1474 RADDR (scratcha), 1475 SCR_COPY (4), 1476 RADDR (dsa), 1477 RADDR (temp), 1478 SCR_RETURN, 1479 0 1480 1481 }/*-------------------------< SKIP >------------------------*/,{ 1482 /* 1483 ** This entry has been canceled. 1484 ** Next time use the next slot. 1485 */ 1486 SCR_COPY (4), 1487 RADDR (scratcha), 1488 PADDR (startpos), 1489 /* 1490 ** patch the launch field. 1491 ** should look like an idle process. 1492 */ 1493 SCR_COPY_F (4), 1494 RADDR (dsa), 1495 PADDR (skip2), 1496 SCR_COPY (8), 1497 PADDR (idle), 1498 }/*-------------------------< SKIP2 >-----------------------*/,{ 1499 0, 1500 SCR_JUMP, 1501 PADDR(start), 1502 }/*-------------------------< IDLE >------------------------*/,{ 1503 /* 1504 ** Nothing to do? 1505 ** Wait for reselect. 1506 */ 1507 SCR_JUMP, 1508 PADDR(reselect), 1509 1510 }/*-------------------------< SELECT >----------------------*/,{ 1511 /* 1512 ** DSA contains the address of a scheduled 1513 ** data structure. 1514 ** 1515 ** SCRATCHA contains the address of the script, 1516 ** which starts the next entry. 1517 ** 1518 ** Set Initiator mode. 1519 ** 1520 ** (Target mode is left as an exercise for the reader) 1521 */ 1522 1523 SCR_CLR (SCR_TRG), 1524 0, 1525 SCR_LOAD_REG (HS_REG, 0xff), 1526 0, 1527 1528 /* 1529 ** And try to select this target. 1530 */ 1531 SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select), 1532 PADDR (reselect), 1533 1534 /* 1535 ** Now there are 4 possibilities: 1536 ** 1537 ** (1) The ncr looses arbitration. 1538 ** This is ok, because it will try again, 1539 ** when the bus becomes idle. 1540 ** (But beware of the timeout function!) 1541 ** 1542 ** (2) The ncr is reselected. 1543 ** Then the script processor takes the jump 1544 ** to the RESELECT label. 1545 ** 1546 ** (3) The ncr completes the selection. 1547 ** Then it will execute the next statement. 1548 ** 1549 ** (4) There is a selection timeout. 1550 ** Then the ncr should interrupt the host and stop. 1551 ** Unfortunately, it seems to continue execution 1552 ** of the script. But it will fail with an 1553 ** IID-interrupt on the next WHEN. 1554 */ 1555 1556 SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_IN)), 1557 0, 1558 1559 /* 1560 ** Send the IDENTIFY and SIMPLE_TAG messages 1561 ** (and the MSG_EXT_SDTR message) 1562 */ 1563 SCR_MOVE_TBL ^ SCR_MSG_OUT, 1564 offsetof (struct dsb, smsg), 1565 #ifdef undef /* XXX better fail than try to deal with this ... */ 1566 SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_OUT)), 1567 -16, 1568 #endif 1569 SCR_CLR (SCR_ATN), 1570 0, 1571 SCR_COPY (1), 1572 RADDR (sfbr), 1573 NADDR (lastmsg), 1574 /* 1575 ** Selection complete. 1576 ** Next time use the next slot. 1577 */ 1578 SCR_COPY (4), 1579 RADDR (scratcha), 1580 PADDR (startpos), 1581 }/*-------------------------< PREPARE >----------------------*/,{ 1582 /* 1583 ** The ncr doesn't have an indirect load 1584 ** or store command. So we have to 1585 ** copy part of the control block to a 1586 ** fixed place, where we can access it. 1587 ** 1588 ** We patch the address part of a 1589 ** COPY command with the DSA-register. 1590 */ 1591 SCR_COPY_F (4), 1592 RADDR (dsa), 1593 PADDR (loadpos), 1594 /* 1595 ** then we do the actual copy. 1596 */ 1597 SCR_COPY (sizeof (struct head)), 1598 /* 1599 ** continued after the next label ... 1600 */ 1601 1602 }/*-------------------------< LOADPOS >---------------------*/,{ 1603 0, 1604 NADDR (header), 1605 /* 1606 ** Mark this nccb as not scheduled. 1607 */ 1608 SCR_COPY (8), 1609 PADDR (idle), 1610 NADDR (header.launch), 1611 /* 1612 ** Set a time stamp for this selection 1613 */ 1614 SCR_COPY (sizeof (ticks)), 1615 KVAR (KVAR_TICKS), 1616 NADDR (header.stamp.select), 1617 /* 1618 ** load the savep (saved pointer) into 1619 ** the TEMP register (actual pointer) 1620 */ 1621 SCR_COPY (4), 1622 NADDR (header.savep), 1623 RADDR (temp), 1624 /* 1625 ** Initialize the status registers 1626 */ 1627 SCR_COPY (4), 1628 NADDR (header.status), 1629 RADDR (scr0), 1630 1631 }/*-------------------------< PREPARE2 >---------------------*/,{ 1632 /* 1633 ** Load the synchronous mode register 1634 */ 1635 SCR_COPY (1), 1636 NADDR (sync_st), 1637 RADDR (sxfer), 1638 /* 1639 ** Load the wide mode and timing register 1640 */ 1641 SCR_COPY (1), 1642 NADDR (wide_st), 1643 RADDR (scntl3), 1644 /* 1645 ** Initialize the msgout buffer with a NOOP message. 1646 */ 1647 SCR_LOAD_REG (scratcha, MSG_NOOP), 1648 0, 1649 SCR_COPY (1), 1650 RADDR (scratcha), 1651 NADDR (msgout), 1652 SCR_COPY (1), 1653 RADDR (scratcha), 1654 NADDR (msgin), 1655 /* 1656 ** Message in phase ? 1657 */ 1658 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 1659 PADDR (dispatch), 1660 /* 1661 ** Extended or reject message ? 1662 */ 1663 SCR_FROM_REG (sbdl), 1664 0, 1665 SCR_JUMP ^ IFTRUE (DATA (MSG_EXTENDED)), 1666 PADDR (msg_in), 1667 SCR_JUMP ^ IFTRUE (DATA (MSG_MESSAGE_REJECT)), 1668 PADDRH (msg_reject), 1669 /* 1670 ** normal processing 1671 */ 1672 SCR_JUMP, 1673 PADDR (dispatch), 1674 }/*-------------------------< SETMSG >----------------------*/,{ 1675 SCR_COPY (1), 1676 RADDR (scratcha), 1677 NADDR (msgout), 1678 SCR_SET (SCR_ATN), 1679 0, 1680 }/*-------------------------< CLRACK >----------------------*/,{ 1681 /* 1682 ** Terminate possible pending message phase. 1683 */ 1684 SCR_CLR (SCR_ACK), 1685 0, 1686 1687 }/*-----------------------< DISPATCH >----------------------*/,{ 1688 SCR_FROM_REG (HS_REG), 1689 0, 1690 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 1691 SIR_NEGO_FAILED, 1692 /* 1693 ** remove bogus output signals 1694 */ 1695 SCR_REG_REG (socl, SCR_AND, CACK|CATN), 1696 0, 1697 SCR_RETURN ^ IFTRUE (WHEN (SCR_DATA_OUT)), 1698 0, 1699 SCR_RETURN ^ IFTRUE (IF (SCR_DATA_IN)), 1700 0, 1701 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), 1702 PADDR (msg_out), 1703 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN)), 1704 PADDR (msg_in), 1705 SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), 1706 PADDR (command), 1707 SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), 1708 PADDR (status), 1709 /* 1710 ** Discard one illegal phase byte, if required. 1711 */ 1712 SCR_LOAD_REG (scratcha, XE_BAD_PHASE), 1713 0, 1714 SCR_COPY (1), 1715 RADDR (scratcha), 1716 NADDR (xerr_st), 1717 SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_OUT)), 1718 8, 1719 SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, 1720 NADDR (scratch), 1721 SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_IN)), 1722 8, 1723 SCR_MOVE_ABS (1) ^ SCR_ILG_IN, 1724 NADDR (scratch), 1725 SCR_JUMP, 1726 PADDR (dispatch), 1727 1728 }/*-------------------------< NO_DATA >--------------------*/,{ 1729 /* 1730 ** The target wants to tranfer too much data 1731 ** or in the wrong direction. 1732 ** Remember that in extended error. 1733 */ 1734 SCR_LOAD_REG (scratcha, XE_EXTRA_DATA), 1735 0, 1736 SCR_COPY (1), 1737 RADDR (scratcha), 1738 NADDR (xerr_st), 1739 /* 1740 ** Discard one data byte, if required. 1741 */ 1742 SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), 1743 8, 1744 SCR_MOVE_ABS (1) ^ SCR_DATA_OUT, 1745 NADDR (scratch), 1746 SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)), 1747 8, 1748 SCR_MOVE_ABS (1) ^ SCR_DATA_IN, 1749 NADDR (scratch), 1750 /* 1751 ** .. and repeat as required. 1752 */ 1753 SCR_CALL, 1754 PADDR (dispatch), 1755 SCR_JUMP, 1756 PADDR (no_data), 1757 }/*-------------------------< CHECKATN >--------------------*/,{ 1758 /* 1759 ** If AAP (bit 1 of scntl0 register) is set 1760 ** and a parity error is detected, 1761 ** the script processor asserts ATN. 1762 ** 1763 ** The target should switch to a MSG_OUT phase 1764 ** to get the message. 1765 */ 1766 SCR_FROM_REG (socl), 1767 0, 1768 SCR_JUMP ^ IFFALSE (MASK (CATN, CATN)), 1769 PADDR (dispatch), 1770 /* 1771 ** count it 1772 */ 1773 SCR_REG_REG (PS_REG, SCR_ADD, 1), 1774 0, 1775 /* 1776 ** Prepare a MSG_INITIATOR_DET_ERR message 1777 ** (initiator detected error). 1778 ** The target should retry the transfer. 1779 */ 1780 SCR_LOAD_REG (scratcha, MSG_INITIATOR_DET_ERR), 1781 0, 1782 SCR_JUMP, 1783 PADDR (setmsg), 1784 1785 }/*-------------------------< COMMAND >--------------------*/,{ 1786 /* 1787 ** If this is not a GETCC transfer ... 1788 */ 1789 SCR_FROM_REG (SS_REG), 1790 0, 1791 /*<<<*/ SCR_JUMPR ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)), 1792 28, 1793 /* 1794 ** ... set a timestamp ... 1795 */ 1796 SCR_COPY (sizeof (ticks)), 1797 KVAR (KVAR_TICKS), 1798 NADDR (header.stamp.command), 1799 /* 1800 ** ... and send the command 1801 */ 1802 SCR_MOVE_TBL ^ SCR_COMMAND, 1803 offsetof (struct dsb, cmd), 1804 SCR_JUMP, 1805 PADDR (dispatch), 1806 /* 1807 ** Send the GETCC command 1808 */ 1809 /*>>>*/ SCR_MOVE_TBL ^ SCR_COMMAND, 1810 offsetof (struct dsb, scmd), 1811 SCR_JUMP, 1812 PADDR (dispatch), 1813 1814 }/*-------------------------< STATUS >--------------------*/,{ 1815 /* 1816 ** set the timestamp. 1817 */ 1818 SCR_COPY (sizeof (ticks)), 1819 KVAR (KVAR_TICKS), 1820 NADDR (header.stamp.status), 1821 /* 1822 ** If this is a GETCC transfer, 1823 */ 1824 SCR_FROM_REG (SS_REG), 1825 0, 1826 /*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (SCSI_STATUS_CHECK_COND)), 1827 40, 1828 /* 1829 ** get the status 1830 */ 1831 SCR_MOVE_ABS (1) ^ SCR_STATUS, 1832 NADDR (scratch), 1833 /* 1834 ** Save status to scsi_status. 1835 ** Mark as complete. 1836 ** And wait for disconnect. 1837 */ 1838 SCR_TO_REG (SS_REG), 1839 0, 1840 SCR_REG_REG (SS_REG, SCR_OR, SCSI_STATUS_SENSE), 1841 0, 1842 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 1843 0, 1844 SCR_JUMP, 1845 PADDR (checkatn), 1846 /* 1847 ** If it was no GETCC transfer, 1848 ** save the status to scsi_status. 1849 */ 1850 /*>>>*/ SCR_MOVE_ABS (1) ^ SCR_STATUS, 1851 NADDR (scratch), 1852 SCR_TO_REG (SS_REG), 1853 0, 1854 /* 1855 ** if it was no check condition ... 1856 */ 1857 SCR_JUMP ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)), 1858 PADDR (checkatn), 1859 /* 1860 ** ... mark as complete. 1861 */ 1862 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 1863 0, 1864 SCR_JUMP, 1865 PADDR (checkatn), 1866 1867 }/*-------------------------< MSG_IN >--------------------*/,{ 1868 /* 1869 ** Get the first byte of the message 1870 ** and save it to SCRATCHA. 1871 ** 1872 ** The script processor doesn't negate the 1873 ** ACK signal after this transfer. 1874 */ 1875 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1876 NADDR (msgin[0]), 1877 /* 1878 ** Check for message parity error. 1879 */ 1880 SCR_TO_REG (scratcha), 1881 0, 1882 SCR_FROM_REG (socl), 1883 0, 1884 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 1885 PADDRH (msg_parity), 1886 SCR_FROM_REG (scratcha), 1887 0, 1888 /* 1889 ** Parity was ok, handle this message. 1890 */ 1891 SCR_JUMP ^ IFTRUE (DATA (MSG_CMDCOMPLETE)), 1892 PADDR (complete), 1893 SCR_JUMP ^ IFTRUE (DATA (MSG_SAVEDATAPOINTER)), 1894 PADDR (save_dp), 1895 SCR_JUMP ^ IFTRUE (DATA (MSG_RESTOREPOINTERS)), 1896 PADDR (restore_dp), 1897 SCR_JUMP ^ IFTRUE (DATA (MSG_DISCONNECT)), 1898 PADDR (disconnect), 1899 SCR_JUMP ^ IFTRUE (DATA (MSG_EXTENDED)), 1900 PADDRH (msg_extended), 1901 SCR_JUMP ^ IFTRUE (DATA (MSG_NOOP)), 1902 PADDR (clrack), 1903 SCR_JUMP ^ IFTRUE (DATA (MSG_MESSAGE_REJECT)), 1904 PADDRH (msg_reject), 1905 SCR_JUMP ^ IFTRUE (DATA (MSG_IGN_WIDE_RESIDUE)), 1906 PADDRH (msg_ign_residue), 1907 /* 1908 ** Rest of the messages left as 1909 ** an exercise ... 1910 ** 1911 ** Unimplemented messages: 1912 ** fall through to MSG_BAD. 1913 */ 1914 }/*-------------------------< MSG_BAD >------------------*/,{ 1915 /* 1916 ** unimplemented message - reject it. 1917 */ 1918 SCR_INT, 1919 SIR_REJECT_SENT, 1920 SCR_LOAD_REG (scratcha, MSG_MESSAGE_REJECT), 1921 0, 1922 SCR_JUMP, 1923 PADDR (setmsg), 1924 1925 }/*-------------------------< COMPLETE >-----------------*/,{ 1926 /* 1927 ** Complete message. 1928 ** 1929 ** If it's not the get condition code, 1930 ** copy TEMP register to LASTP in header. 1931 */ 1932 SCR_FROM_REG (SS_REG), 1933 0, 1934 /*<<<*/ SCR_JUMPR ^ IFTRUE (MASK (SCSI_STATUS_SENSE, SCSI_STATUS_SENSE)), 1935 12, 1936 SCR_COPY (4), 1937 RADDR (temp), 1938 NADDR (header.lastp), 1939 /*>>>*/ /* 1940 ** When we terminate the cycle by clearing ACK, 1941 ** the target may disconnect immediately. 1942 ** 1943 ** We don't want to be told of an 1944 ** "unexpected disconnect", 1945 ** so we disable this feature. 1946 */ 1947 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 1948 0, 1949 /* 1950 ** Terminate cycle ... 1951 */ 1952 SCR_CLR (SCR_ACK|SCR_ATN), 1953 0, 1954 /* 1955 ** ... and wait for the disconnect. 1956 */ 1957 SCR_WAIT_DISC, 1958 0, 1959 }/*-------------------------< CLEANUP >-------------------*/,{ 1960 /* 1961 ** dsa: Pointer to nccb 1962 ** or xxxxxxFF (no nccb) 1963 ** 1964 ** HS_REG: Host-Status (<>0!) 1965 */ 1966 SCR_FROM_REG (dsa), 1967 0, 1968 SCR_JUMP ^ IFTRUE (DATA (0xff)), 1969 PADDR (signal), 1970 /* 1971 ** dsa is valid. 1972 ** save the status registers 1973 */ 1974 SCR_COPY (4), 1975 RADDR (scr0), 1976 NADDR (header.status), 1977 /* 1978 ** and copy back the header to the nccb. 1979 */ 1980 SCR_COPY_F (4), 1981 RADDR (dsa), 1982 PADDR (cleanup0), 1983 SCR_COPY (sizeof (struct head)), 1984 NADDR (header), 1985 }/*-------------------------< CLEANUP0 >--------------------*/,{ 1986 0, 1987 1988 /* 1989 ** If command resulted in "check condition" 1990 ** status and is not yet completed, 1991 ** try to get the condition code. 1992 */ 1993 SCR_FROM_REG (HS_REG), 1994 0, 1995 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (0, HS_DONEMASK)), 1996 16, 1997 SCR_FROM_REG (SS_REG), 1998 0, 1999 SCR_JUMP ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)), 2000 PADDRH(getcc2), 2001 }/*-------------------------< SIGNAL >----------------------*/,{ 2002 /* 2003 ** if status = queue full, 2004 ** reinsert in startqueue and stall queue. 2005 */ 2006 /*>>>*/ SCR_FROM_REG (SS_REG), 2007 0, 2008 SCR_INT ^ IFTRUE (DATA (SCSI_STATUS_QUEUE_FULL)), 2009 SIR_STALL_QUEUE, 2010 /* 2011 ** And make the DSA register invalid. 2012 */ 2013 SCR_LOAD_REG (dsa, 0xff), /* invalid */ 2014 0, 2015 /* 2016 ** if job completed ... 2017 */ 2018 SCR_FROM_REG (HS_REG), 2019 0, 2020 /* 2021 ** ... signal completion to the host 2022 */ 2023 SCR_INT_FLY ^ IFFALSE (MASK (0, HS_DONEMASK)), 2024 0, 2025 /* 2026 ** Auf zu neuen Schandtaten! 2027 */ 2028 SCR_JUMP, 2029 PADDR(start), 2030 2031 }/*-------------------------< SAVE_DP >------------------*/,{ 2032 /* 2033 ** SAVE_DP message: 2034 ** Copy TEMP register to SAVEP in header. 2035 */ 2036 SCR_COPY (4), 2037 RADDR (temp), 2038 NADDR (header.savep), 2039 SCR_JUMP, 2040 PADDR (clrack), 2041 }/*-------------------------< RESTORE_DP >---------------*/,{ 2042 /* 2043 ** RESTORE_DP message: 2044 ** Copy SAVEP in header to TEMP register. 2045 */ 2046 SCR_COPY (4), 2047 NADDR (header.savep), 2048 RADDR (temp), 2049 SCR_JUMP, 2050 PADDR (clrack), 2051 2052 }/*-------------------------< DISCONNECT >---------------*/,{ 2053 /* 2054 ** If QUIRK_AUTOSAVE is set, 2055 ** do an "save pointer" operation. 2056 */ 2057 SCR_FROM_REG (QU_REG), 2058 0, 2059 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (QUIRK_AUTOSAVE, QUIRK_AUTOSAVE)), 2060 12, 2061 /* 2062 ** like SAVE_DP message: 2063 ** Copy TEMP register to SAVEP in header. 2064 */ 2065 SCR_COPY (4), 2066 RADDR (temp), 2067 NADDR (header.savep), 2068 /*>>>*/ /* 2069 ** Check if temp==savep or temp==goalp: 2070 ** if not, log a missing save pointer message. 2071 ** In fact, it's a comparison mod 256. 2072 ** 2073 ** Hmmm, I hadn't thought that I would be urged to 2074 ** write this kind of ugly self modifying code. 2075 ** 2076 ** It's unbelievable, but the ncr53c8xx isn't able 2077 ** to subtract one register from another. 2078 */ 2079 SCR_FROM_REG (temp), 2080 0, 2081 /* 2082 ** You are not expected to understand this .. 2083 ** 2084 ** CAUTION: only little endian architectures supported! XXX 2085 */ 2086 SCR_COPY_F (1), 2087 NADDR (header.savep), 2088 PADDR (disconnect0), 2089 }/*-------------------------< DISCONNECT0 >--------------*/,{ 2090 /*<<<*/ SCR_JUMPR ^ IFTRUE (DATA (1)), 2091 20, 2092 /* 2093 ** neither this 2094 */ 2095 SCR_COPY_F (1), 2096 NADDR (header.goalp), 2097 PADDR (disconnect1), 2098 }/*-------------------------< DISCONNECT1 >--------------*/,{ 2099 SCR_INT ^ IFFALSE (DATA (1)), 2100 SIR_MISSING_SAVE, 2101 /*>>>*/ 2102 2103 /* 2104 ** DISCONNECTing ... 2105 ** 2106 ** disable the "unexpected disconnect" feature, 2107 ** and remove the ACK signal. 2108 */ 2109 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2110 0, 2111 SCR_CLR (SCR_ACK|SCR_ATN), 2112 0, 2113 /* 2114 ** Wait for the disconnect. 2115 */ 2116 SCR_WAIT_DISC, 2117 0, 2118 /* 2119 ** Profiling: 2120 ** Set a time stamp, 2121 ** and count the disconnects. 2122 */ 2123 SCR_COPY (sizeof (ticks)), 2124 KVAR (KVAR_TICKS), 2125 NADDR (header.stamp.disconnect), 2126 SCR_COPY (4), 2127 NADDR (disc_phys), 2128 RADDR (temp), 2129 SCR_REG_REG (temp, SCR_ADD, 0x01), 2130 0, 2131 SCR_COPY (4), 2132 RADDR (temp), 2133 NADDR (disc_phys), 2134 /* 2135 ** Status is: DISCONNECTED. 2136 */ 2137 SCR_LOAD_REG (HS_REG, HS_DISCONNECT), 2138 0, 2139 SCR_JUMP, 2140 PADDR (cleanup), 2141 2142 }/*-------------------------< MSG_OUT >-------------------*/,{ 2143 /* 2144 ** The target requests a message. 2145 */ 2146 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 2147 NADDR (msgout), 2148 SCR_COPY (1), 2149 RADDR (sfbr), 2150 NADDR (lastmsg), 2151 /* 2152 ** If it was no ABORT message ... 2153 */ 2154 SCR_JUMP ^ IFTRUE (DATA (MSG_ABORT)), 2155 PADDRH (msg_out_abort), 2156 /* 2157 ** ... wait for the next phase 2158 ** if it's a message out, send it again, ... 2159 */ 2160 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 2161 PADDR (msg_out), 2162 }/*-------------------------< MSG_OUT_DONE >--------------*/,{ 2163 /* 2164 ** ... else clear the message ... 2165 */ 2166 SCR_LOAD_REG (scratcha, MSG_NOOP), 2167 0, 2168 SCR_COPY (4), 2169 RADDR (scratcha), 2170 NADDR (msgout), 2171 /* 2172 ** ... and process the next phase 2173 */ 2174 SCR_JUMP, 2175 PADDR (dispatch), 2176 2177 }/*------------------------< BADGETCC >---------------------*/,{ 2178 /* 2179 ** If SIGP was set, clear it and try again. 2180 */ 2181 SCR_FROM_REG (ctest2), 2182 0, 2183 SCR_JUMP ^ IFTRUE (MASK (CSIGP,CSIGP)), 2184 PADDRH (getcc2), 2185 SCR_INT, 2186 SIR_SENSE_FAILED, 2187 }/*-------------------------< RESELECT >--------------------*/,{ 2188 /* 2189 ** This NOP will be patched with LED OFF 2190 ** SCR_REG_REG (gpreg, SCR_OR, 0x01) 2191 */ 2192 SCR_NO_OP, 2193 0, 2194 2195 /* 2196 ** make the DSA invalid. 2197 */ 2198 SCR_LOAD_REG (dsa, 0xff), 2199 0, 2200 SCR_CLR (SCR_TRG), 2201 0, 2202 /* 2203 ** Sleep waiting for a reselection. 2204 ** If SIGP is set, special treatment. 2205 ** 2206 ** Zu allem bereit .. 2207 */ 2208 SCR_WAIT_RESEL, 2209 PADDR(reselect2), 2210 }/*-------------------------< RESELECT1 >--------------------*/,{ 2211 /* 2212 ** This NOP will be patched with LED ON 2213 ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) 2214 */ 2215 SCR_NO_OP, 2216 0, 2217 /* 2218 ** ... zu nichts zu gebrauchen ? 2219 ** 2220 ** load the target id into the SFBR 2221 ** and jump to the control block. 2222 ** 2223 ** Look at the declarations of 2224 ** - struct ncb 2225 ** - struct tcb 2226 ** - struct lcb 2227 ** - struct nccb 2228 ** to understand what's going on. 2229 */ 2230 SCR_REG_SFBR (ssid, SCR_AND, 0x8F), 2231 0, 2232 SCR_TO_REG (sdid), 2233 0, 2234 SCR_JUMP, 2235 NADDR (jump_tcb), 2236 }/*-------------------------< RESELECT2 >-------------------*/,{ 2237 /* 2238 ** This NOP will be patched with LED ON 2239 ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) 2240 */ 2241 SCR_NO_OP, 2242 0, 2243 /* 2244 ** If it's not connected :( 2245 ** -> interrupted by SIGP bit. 2246 ** Jump to start. 2247 */ 2248 SCR_FROM_REG (ctest2), 2249 0, 2250 SCR_JUMP ^ IFTRUE (MASK (CSIGP,CSIGP)), 2251 PADDR (start), 2252 SCR_JUMP, 2253 PADDR (reselect), 2254 2255 }/*-------------------------< RESEL_TMP >-------------------*/,{ 2256 /* 2257 ** The return address in TEMP 2258 ** is in fact the data structure address, 2259 ** so copy it to the DSA register. 2260 */ 2261 SCR_COPY (4), 2262 RADDR (temp), 2263 RADDR (dsa), 2264 SCR_JUMP, 2265 PADDR (prepare), 2266 2267 }/*-------------------------< RESEL_LUN >-------------------*/,{ 2268 /* 2269 ** come back to this point 2270 ** to get an IDENTIFY message 2271 ** Wait for a msg_in phase. 2272 */ 2273 /*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 2274 48, 2275 /* 2276 ** message phase 2277 ** It's not a sony, it's a trick: 2278 ** read the data without acknowledging it. 2279 */ 2280 SCR_FROM_REG (sbdl), 2281 0, 2282 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (MSG_IDENTIFYFLAG, 0x98)), 2283 32, 2284 /* 2285 ** It WAS an Identify message. 2286 ** get it and ack it! 2287 */ 2288 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2289 NADDR (msgin), 2290 SCR_CLR (SCR_ACK), 2291 0, 2292 /* 2293 ** Mask out the lun. 2294 */ 2295 SCR_REG_REG (sfbr, SCR_AND, 0x07), 2296 0, 2297 SCR_RETURN, 2298 0, 2299 /* 2300 ** No message phase or no IDENTIFY message: 2301 ** return 0. 2302 */ 2303 /*>>>*/ SCR_LOAD_SFBR (0), 2304 0, 2305 SCR_RETURN, 2306 0, 2307 2308 }/*-------------------------< RESEL_TAG >-------------------*/,{ 2309 /* 2310 ** come back to this point 2311 ** to get a SIMPLE_TAG message 2312 ** Wait for a MSG_IN phase. 2313 */ 2314 /*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 2315 64, 2316 /* 2317 ** message phase 2318 ** It's a trick - read the data 2319 ** without acknowledging it. 2320 */ 2321 SCR_FROM_REG (sbdl), 2322 0, 2323 /*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (MSG_SIMPLE_Q_TAG)), 2324 48, 2325 /* 2326 ** It WAS a SIMPLE_TAG message. 2327 ** get it and ack it! 2328 */ 2329 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2330 NADDR (msgin), 2331 SCR_CLR (SCR_ACK), 2332 0, 2333 /* 2334 ** Wait for the second byte (the tag) 2335 */ 2336 /*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 2337 24, 2338 /* 2339 ** Get it and ack it! 2340 */ 2341 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2342 NADDR (msgin), 2343 SCR_CLR (SCR_ACK|SCR_CARRY), 2344 0, 2345 SCR_RETURN, 2346 0, 2347 /* 2348 ** No message phase or no SIMPLE_TAG message 2349 ** or no second byte: return 0. 2350 */ 2351 /*>>>*/ SCR_LOAD_SFBR (0), 2352 0, 2353 SCR_SET (SCR_CARRY), 2354 0, 2355 SCR_RETURN, 2356 0, 2357 2358 }/*-------------------------< DATA_IN >--------------------*/,{ 2359 /* 2360 ** Because the size depends on the 2361 ** #define MAX_SCATTER parameter, 2362 ** it is filled in at runtime. 2363 ** 2364 ** SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 2365 ** PADDR (no_data), 2366 ** SCR_COPY (sizeof (ticks)), 2367 ** KVAR (KVAR_TICKS), 2368 ** NADDR (header.stamp.data), 2369 ** SCR_MOVE_TBL ^ SCR_DATA_IN, 2370 ** offsetof (struct dsb, data[ 0]), 2371 ** 2372 ** ##===========< i=1; i<MAX_SCATTER >========= 2373 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), 2374 ** || PADDR (checkatn), 2375 ** || SCR_MOVE_TBL ^ SCR_DATA_IN, 2376 ** || offsetof (struct dsb, data[ i]), 2377 ** ##========================================== 2378 ** 2379 ** SCR_CALL, 2380 ** PADDR (checkatn), 2381 ** SCR_JUMP, 2382 ** PADDR (no_data), 2383 */ 2384 0 2385 }/*-------------------------< DATA_OUT >-------------------*/,{ 2386 /* 2387 ** Because the size depends on the 2388 ** #define MAX_SCATTER parameter, 2389 ** it is filled in at runtime. 2390 ** 2391 ** SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_OUT)), 2392 ** PADDR (no_data), 2393 ** SCR_COPY (sizeof (ticks)), 2394 ** KVAR (KVAR_TICKS), 2395 ** NADDR (header.stamp.data), 2396 ** SCR_MOVE_TBL ^ SCR_DATA_OUT, 2397 ** offsetof (struct dsb, data[ 0]), 2398 ** 2399 ** ##===========< i=1; i<MAX_SCATTER >========= 2400 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)), 2401 ** || PADDR (dispatch), 2402 ** || SCR_MOVE_TBL ^ SCR_DATA_OUT, 2403 ** || offsetof (struct dsb, data[ i]), 2404 ** ##========================================== 2405 ** 2406 ** SCR_CALL, 2407 ** PADDR (dispatch), 2408 ** SCR_JUMP, 2409 ** PADDR (no_data), 2410 ** 2411 **--------------------------------------------------------- 2412 */ 2413 (u_long)0 2414 2415 }/*--------------------------------------------------------*/ 2416 }; 2417 2418 2419 static struct scripth scripth0 = { 2420 /*-------------------------< TRYLOOP >---------------------*/{ 2421 /* 2422 ** Load an entry of the start queue into dsa 2423 ** and try to start it by jumping to TRYSEL. 2424 ** 2425 ** Because the size depends on the 2426 ** #define MAX_START parameter, it is filled 2427 ** in at runtime. 2428 ** 2429 **----------------------------------------------------------- 2430 ** 2431 ** ##===========< I=0; i<MAX_START >=========== 2432 ** || SCR_COPY (4), 2433 ** || NADDR (squeue[i]), 2434 ** || RADDR (dsa), 2435 ** || SCR_CALL, 2436 ** || PADDR (trysel), 2437 ** ##========================================== 2438 ** 2439 ** SCR_JUMP, 2440 ** PADDRH(tryloop), 2441 ** 2442 **----------------------------------------------------------- 2443 */ 2444 0 2445 }/*-------------------------< MSG_PARITY >---------------*/,{ 2446 /* 2447 ** count it 2448 */ 2449 SCR_REG_REG (PS_REG, SCR_ADD, 0x01), 2450 0, 2451 /* 2452 ** send a "message parity error" message. 2453 */ 2454 SCR_LOAD_REG (scratcha, MSG_PARITY_ERROR), 2455 0, 2456 SCR_JUMP, 2457 PADDR (setmsg), 2458 }/*-------------------------< MSG_MESSAGE_REJECT >---------------*/,{ 2459 /* 2460 ** If a negotiation was in progress, 2461 ** negotiation failed. 2462 */ 2463 SCR_FROM_REG (HS_REG), 2464 0, 2465 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 2466 SIR_NEGO_FAILED, 2467 /* 2468 ** else make host log this message 2469 */ 2470 SCR_INT ^ IFFALSE (DATA (HS_NEGOTIATE)), 2471 SIR_REJECT_RECEIVED, 2472 SCR_JUMP, 2473 PADDR (clrack), 2474 2475 }/*-------------------------< MSG_IGN_RESIDUE >----------*/,{ 2476 /* 2477 ** Terminate cycle 2478 */ 2479 SCR_CLR (SCR_ACK), 2480 0, 2481 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2482 PADDR (dispatch), 2483 /* 2484 ** get residue size. 2485 */ 2486 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2487 NADDR (msgin[1]), 2488 /* 2489 ** Check for message parity error. 2490 */ 2491 SCR_TO_REG (scratcha), 2492 0, 2493 SCR_FROM_REG (socl), 2494 0, 2495 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2496 PADDRH (msg_parity), 2497 SCR_FROM_REG (scratcha), 2498 0, 2499 /* 2500 ** Size is 0 .. ignore message. 2501 */ 2502 SCR_JUMP ^ IFTRUE (DATA (0)), 2503 PADDR (clrack), 2504 /* 2505 ** Size is not 1 .. have to interrupt. 2506 */ 2507 /*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (1)), 2508 40, 2509 /* 2510 ** Check for residue byte in swide register 2511 */ 2512 SCR_FROM_REG (scntl2), 2513 0, 2514 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), 2515 16, 2516 /* 2517 ** There IS data in the swide register. 2518 ** Discard it. 2519 */ 2520 SCR_REG_REG (scntl2, SCR_OR, WSR), 2521 0, 2522 SCR_JUMP, 2523 PADDR (clrack), 2524 /* 2525 ** Load again the size to the sfbr register. 2526 */ 2527 /*>>>*/ SCR_FROM_REG (scratcha), 2528 0, 2529 /*>>>*/ SCR_INT, 2530 SIR_IGN_RESIDUE, 2531 SCR_JUMP, 2532 PADDR (clrack), 2533 2534 }/*-------------------------< MSG_EXTENDED >-------------*/,{ 2535 /* 2536 ** Terminate cycle 2537 */ 2538 SCR_CLR (SCR_ACK), 2539 0, 2540 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2541 PADDR (dispatch), 2542 /* 2543 ** get length. 2544 */ 2545 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2546 NADDR (msgin[1]), 2547 /* 2548 ** Check for message parity error. 2549 */ 2550 SCR_TO_REG (scratcha), 2551 0, 2552 SCR_FROM_REG (socl), 2553 0, 2554 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2555 PADDRH (msg_parity), 2556 SCR_FROM_REG (scratcha), 2557 0, 2558 /* 2559 */ 2560 SCR_JUMP ^ IFTRUE (DATA (3)), 2561 PADDRH (msg_ext_3), 2562 SCR_JUMP ^ IFFALSE (DATA (2)), 2563 PADDR (msg_bad), 2564 }/*-------------------------< MSG_EXT_2 >----------------*/,{ 2565 SCR_CLR (SCR_ACK), 2566 0, 2567 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2568 PADDR (dispatch), 2569 /* 2570 ** get extended message code. 2571 */ 2572 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2573 NADDR (msgin[2]), 2574 /* 2575 ** Check for message parity error. 2576 */ 2577 SCR_TO_REG (scratcha), 2578 0, 2579 SCR_FROM_REG (socl), 2580 0, 2581 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2582 PADDRH (msg_parity), 2583 SCR_FROM_REG (scratcha), 2584 0, 2585 SCR_JUMP ^ IFTRUE (DATA (MSG_EXT_WDTR)), 2586 PADDRH (msg_wdtr), 2587 /* 2588 ** unknown extended message 2589 */ 2590 SCR_JUMP, 2591 PADDR (msg_bad) 2592 }/*-------------------------< MSG_WDTR >-----------------*/,{ 2593 SCR_CLR (SCR_ACK), 2594 0, 2595 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2596 PADDR (dispatch), 2597 /* 2598 ** get data bus width 2599 */ 2600 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2601 NADDR (msgin[3]), 2602 SCR_FROM_REG (socl), 2603 0, 2604 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2605 PADDRH (msg_parity), 2606 /* 2607 ** let the host do the real work. 2608 */ 2609 SCR_INT, 2610 SIR_NEGO_WIDE, 2611 /* 2612 ** let the target fetch our answer. 2613 */ 2614 SCR_SET (SCR_ATN), 2615 0, 2616 SCR_CLR (SCR_ACK), 2617 0, 2618 2619 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), 2620 SIR_NEGO_PROTO, 2621 /* 2622 ** Send the MSG_EXT_WDTR 2623 */ 2624 SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, 2625 NADDR (msgout), 2626 SCR_CLR (SCR_ATN), 2627 0, 2628 SCR_COPY (1), 2629 RADDR (sfbr), 2630 NADDR (lastmsg), 2631 SCR_JUMP, 2632 PADDR (msg_out_done), 2633 2634 }/*-------------------------< MSG_EXT_3 >----------------*/,{ 2635 SCR_CLR (SCR_ACK), 2636 0, 2637 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2638 PADDR (dispatch), 2639 /* 2640 ** get extended message code. 2641 */ 2642 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2643 NADDR (msgin[2]), 2644 /* 2645 ** Check for message parity error. 2646 */ 2647 SCR_TO_REG (scratcha), 2648 0, 2649 SCR_FROM_REG (socl), 2650 0, 2651 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2652 PADDRH (msg_parity), 2653 SCR_FROM_REG (scratcha), 2654 0, 2655 SCR_JUMP ^ IFTRUE (DATA (MSG_EXT_SDTR)), 2656 PADDRH (msg_sdtr), 2657 /* 2658 ** unknown extended message 2659 */ 2660 SCR_JUMP, 2661 PADDR (msg_bad) 2662 2663 }/*-------------------------< MSG_SDTR >-----------------*/,{ 2664 SCR_CLR (SCR_ACK), 2665 0, 2666 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2667 PADDR (dispatch), 2668 /* 2669 ** get period and offset 2670 */ 2671 SCR_MOVE_ABS (2) ^ SCR_MSG_IN, 2672 NADDR (msgin[3]), 2673 SCR_FROM_REG (socl), 2674 0, 2675 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2676 PADDRH (msg_parity), 2677 /* 2678 ** let the host do the real work. 2679 */ 2680 SCR_INT, 2681 SIR_NEGO_SYNC, 2682 /* 2683 ** let the target fetch our answer. 2684 */ 2685 SCR_SET (SCR_ATN), 2686 0, 2687 SCR_CLR (SCR_ACK), 2688 0, 2689 2690 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), 2691 SIR_NEGO_PROTO, 2692 /* 2693 ** Send the MSG_EXT_SDTR 2694 */ 2695 SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, 2696 NADDR (msgout), 2697 SCR_CLR (SCR_ATN), 2698 0, 2699 SCR_COPY (1), 2700 RADDR (sfbr), 2701 NADDR (lastmsg), 2702 SCR_JUMP, 2703 PADDR (msg_out_done), 2704 2705 }/*-------------------------< MSG_OUT_ABORT >-------------*/,{ 2706 /* 2707 ** After ABORT message, 2708 ** 2709 ** expect an immediate disconnect, ... 2710 */ 2711 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2712 0, 2713 SCR_CLR (SCR_ACK|SCR_ATN), 2714 0, 2715 SCR_WAIT_DISC, 2716 0, 2717 /* 2718 ** ... and set the status to "ABORTED" 2719 */ 2720 SCR_LOAD_REG (HS_REG, HS_ABORTED), 2721 0, 2722 SCR_JUMP, 2723 PADDR (cleanup), 2724 2725 }/*-------------------------< GETCC >-----------------------*/,{ 2726 /* 2727 ** The ncr doesn't have an indirect load 2728 ** or store command. So we have to 2729 ** copy part of the control block to a 2730 ** fixed place, where we can modify it. 2731 ** 2732 ** We patch the address part of a COPY command 2733 ** with the address of the dsa register ... 2734 */ 2735 SCR_COPY_F (4), 2736 RADDR (dsa), 2737 PADDRH (getcc1), 2738 /* 2739 ** ... then we do the actual copy. 2740 */ 2741 SCR_COPY (sizeof (struct head)), 2742 }/*-------------------------< GETCC1 >----------------------*/,{ 2743 0, 2744 NADDR (header), 2745 /* 2746 ** Initialize the status registers 2747 */ 2748 SCR_COPY (4), 2749 NADDR (header.status), 2750 RADDR (scr0), 2751 }/*-------------------------< GETCC2 >----------------------*/,{ 2752 /* 2753 ** Get the condition code from a target. 2754 ** 2755 ** DSA points to a data structure. 2756 ** Set TEMP to the script location 2757 ** that receives the condition code. 2758 ** 2759 ** Because there is no script command 2760 ** to load a longword into a register, 2761 ** we use a CALL command. 2762 */ 2763 /*<<<*/ SCR_CALLR, 2764 24, 2765 /* 2766 ** Get the condition code. 2767 */ 2768 SCR_MOVE_TBL ^ SCR_DATA_IN, 2769 offsetof (struct dsb, sense), 2770 /* 2771 ** No data phase may follow! 2772 */ 2773 SCR_CALL, 2774 PADDR (checkatn), 2775 SCR_JUMP, 2776 PADDR (no_data), 2777 /*>>>*/ 2778 2779 /* 2780 ** The CALL jumps to this point. 2781 ** Prepare for a RESTORE_POINTER message. 2782 ** Save the TEMP register into the saved pointer. 2783 */ 2784 SCR_COPY (4), 2785 RADDR (temp), 2786 NADDR (header.savep), 2787 /* 2788 ** Load scratcha, because in case of a selection timeout, 2789 ** the host will expect a new value for startpos in 2790 ** the scratcha register. 2791 */ 2792 SCR_COPY (4), 2793 PADDR (startpos), 2794 RADDR (scratcha), 2795 #ifdef NCR_GETCC_WITHMSG 2796 /* 2797 ** If QUIRK_NOMSG is set, select without ATN. 2798 ** and don't send a message. 2799 */ 2800 SCR_FROM_REG (QU_REG), 2801 0, 2802 SCR_JUMP ^ IFTRUE (MASK (QUIRK_NOMSG, QUIRK_NOMSG)), 2803 PADDRH(getcc3), 2804 /* 2805 ** Then try to connect to the target. 2806 ** If we are reselected, special treatment 2807 ** of the current job is required before 2808 ** accepting the reselection. 2809 */ 2810 SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select), 2811 PADDR(badgetcc), 2812 /* 2813 ** Send the IDENTIFY message. 2814 ** In case of short transfer, remove ATN. 2815 */ 2816 SCR_MOVE_TBL ^ SCR_MSG_OUT, 2817 offsetof (struct dsb, smsg2), 2818 SCR_CLR (SCR_ATN), 2819 0, 2820 /* 2821 ** save the first byte of the message. 2822 */ 2823 SCR_COPY (1), 2824 RADDR (sfbr), 2825 NADDR (lastmsg), 2826 SCR_JUMP, 2827 PADDR (prepare2), 2828 2829 #endif 2830 }/*-------------------------< GETCC3 >----------------------*/,{ 2831 /* 2832 ** Try to connect to the target. 2833 ** If we are reselected, special treatment 2834 ** of the current job is required before 2835 ** accepting the reselection. 2836 ** 2837 ** Silly target won't accept a message. 2838 ** Select without ATN. 2839 */ 2840 SCR_SEL_TBL ^ offsetof (struct dsb, select), 2841 PADDR(badgetcc), 2842 /* 2843 ** Force error if selection timeout 2844 */ 2845 SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_IN)), 2846 0, 2847 /* 2848 ** don't negotiate. 2849 */ 2850 SCR_JUMP, 2851 PADDR (prepare2), 2852 }/*-------------------------< ABORTTAG >-------------------*/,{ 2853 /* 2854 ** Abort a bad reselection. 2855 ** Set the message to ABORT vs. ABORT_TAG 2856 */ 2857 SCR_LOAD_REG (scratcha, MSG_ABORT_TAG), 2858 0, 2859 SCR_JUMPR ^ IFFALSE (CARRYSET), 2860 8, 2861 }/*-------------------------< ABORT >----------------------*/,{ 2862 SCR_LOAD_REG (scratcha, MSG_ABORT), 2863 0, 2864 SCR_COPY (1), 2865 RADDR (scratcha), 2866 NADDR (msgout), 2867 SCR_SET (SCR_ATN), 2868 0, 2869 SCR_CLR (SCR_ACK), 2870 0, 2871 /* 2872 ** and send it. 2873 ** we expect an immediate disconnect 2874 */ 2875 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2876 0, 2877 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 2878 NADDR (msgout), 2879 SCR_COPY (1), 2880 RADDR (sfbr), 2881 NADDR (lastmsg), 2882 SCR_CLR (SCR_ACK|SCR_ATN), 2883 0, 2884 SCR_WAIT_DISC, 2885 0, 2886 SCR_JUMP, 2887 PADDR (start), 2888 }/*-------------------------< SNOOPTEST >-------------------*/,{ 2889 /* 2890 ** Read the variable. 2891 */ 2892 SCR_COPY (4), 2893 KVAR (KVAR_NCR_CACHE), 2894 RADDR (scratcha), 2895 /* 2896 ** Write the variable. 2897 */ 2898 SCR_COPY (4), 2899 RADDR (temp), 2900 KVAR (KVAR_NCR_CACHE), 2901 /* 2902 ** Read back the variable. 2903 */ 2904 SCR_COPY (4), 2905 KVAR (KVAR_NCR_CACHE), 2906 RADDR (temp), 2907 }/*-------------------------< SNOOPEND >-------------------*/,{ 2908 /* 2909 ** And stop. 2910 */ 2911 SCR_INT, 2912 99, 2913 }/*--------------------------------------------------------*/ 2914 }; 2915 2916 2917 /*========================================================== 2918 ** 2919 ** 2920 ** Fill in #define dependent parts of the script 2921 ** 2922 ** 2923 **========================================================== 2924 */ 2925 2926 void ncr_script_fill (struct script * scr, struct scripth * scrh) 2927 { 2928 int i; 2929 ncrcmd *p; 2930 2931 p = scrh->tryloop; 2932 for (i=0; i<MAX_START; i++) { 2933 *p++ =SCR_COPY (4); 2934 *p++ =NADDR (squeue[i]); 2935 *p++ =RADDR (dsa); 2936 *p++ =SCR_CALL; 2937 *p++ =PADDR (trysel); 2938 }; 2939 *p++ =SCR_JUMP; 2940 *p++ =PADDRH(tryloop); 2941 2942 assert ((char *)p == (char *)&scrh->tryloop + sizeof (scrh->tryloop)); 2943 2944 p = scr->data_in; 2945 2946 *p++ =SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)); 2947 *p++ =PADDR (no_data); 2948 *p++ =SCR_COPY (sizeof (ticks)); 2949 *p++ =(ncrcmd) KVAR (KVAR_TICKS); 2950 *p++ =NADDR (header.stamp.data); 2951 *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; 2952 *p++ =offsetof (struct dsb, data[ 0]); 2953 2954 for (i=1; i<MAX_SCATTER; i++) { 2955 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)); 2956 *p++ =PADDR (checkatn); 2957 *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; 2958 *p++ =offsetof (struct dsb, data[i]); 2959 }; 2960 2961 *p++ =SCR_CALL; 2962 *p++ =PADDR (checkatn); 2963 *p++ =SCR_JUMP; 2964 *p++ =PADDR (no_data); 2965 2966 assert ((char *)p == (char *)&scr->data_in + sizeof (scr->data_in)); 2967 2968 p = scr->data_out; 2969 2970 *p++ =SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_OUT)); 2971 *p++ =PADDR (no_data); 2972 *p++ =SCR_COPY (sizeof (ticks)); 2973 *p++ =(ncrcmd) KVAR (KVAR_TICKS); 2974 *p++ =NADDR (header.stamp.data); 2975 *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; 2976 *p++ =offsetof (struct dsb, data[ 0]); 2977 2978 for (i=1; i<MAX_SCATTER; i++) { 2979 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)); 2980 *p++ =PADDR (dispatch); 2981 *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; 2982 *p++ =offsetof (struct dsb, data[i]); 2983 }; 2984 2985 *p++ =SCR_CALL; 2986 *p++ =PADDR (dispatch); 2987 *p++ =SCR_JUMP; 2988 *p++ =PADDR (no_data); 2989 2990 assert ((char *)p == (char *)&scr->data_out + sizeof (scr->data_out)); 2991 } 2992 2993 /*========================================================== 2994 ** 2995 ** 2996 ** Copy and rebind a script. 2997 ** 2998 ** 2999 **========================================================== 3000 */ 3001 3002 static void ncr_script_copy_and_bind (ncb_p np, ncrcmd *src, ncrcmd *dst, int len) 3003 { 3004 ncrcmd opcode, new, old, tmp1, tmp2; 3005 ncrcmd *start, *end; 3006 int relocs, offset; 3007 3008 start = src; 3009 end = src + len/4; 3010 offset = 0; 3011 3012 while (src < end) { 3013 3014 opcode = *src++; 3015 WRITESCRIPT_OFF(dst, offset, opcode); 3016 offset += 4; 3017 3018 /* 3019 ** If we forget to change the length 3020 ** in struct script, a field will be 3021 ** padded with 0. This is an illegal 3022 ** command. 3023 */ 3024 3025 if (opcode == 0) { 3026 printf ("%s: ERROR0 IN SCRIPT at %d.\n", 3027 ncr_name(np), (int) (src-start-1)); 3028 DELAY (1000000); 3029 }; 3030 3031 if (DEBUG_FLAGS & DEBUG_SCRIPT) 3032 printf ("%p: <%x>\n", 3033 (src-1), (unsigned)opcode); 3034 3035 /* 3036 ** We don't have to decode ALL commands 3037 */ 3038 switch (opcode >> 28) { 3039 3040 case 0xc: 3041 /* 3042 ** COPY has TWO arguments. 3043 */ 3044 relocs = 2; 3045 tmp1 = src[0]; 3046 if ((tmp1 & RELOC_MASK) == RELOC_KVAR) 3047 tmp1 = 0; 3048 tmp2 = src[1]; 3049 if ((tmp2 & RELOC_MASK) == RELOC_KVAR) 3050 tmp2 = 0; 3051 if ((tmp1 ^ tmp2) & 3) { 3052 printf ("%s: ERROR1 IN SCRIPT at %d.\n", 3053 ncr_name(np), (int) (src-start-1)); 3054 DELAY (1000000); 3055 } 3056 /* 3057 ** If PREFETCH feature not enabled, remove 3058 ** the NO FLUSH bit if present. 3059 */ 3060 if ((opcode & SCR_NO_FLUSH) && !(np->features&FE_PFEN)) 3061 WRITESCRIPT_OFF(dst, offset - 4, 3062 (opcode & ~SCR_NO_FLUSH)); 3063 break; 3064 3065 case 0x0: 3066 /* 3067 ** MOVE (absolute address) 3068 */ 3069 relocs = 1; 3070 break; 3071 3072 case 0x8: 3073 /* 3074 ** JUMP / CALL 3075 ** dont't relocate if relative :-) 3076 */ 3077 if (opcode & 0x00800000) 3078 relocs = 0; 3079 else 3080 relocs = 1; 3081 break; 3082 3083 case 0x4: 3084 case 0x5: 3085 case 0x6: 3086 case 0x7: 3087 relocs = 1; 3088 break; 3089 3090 default: 3091 relocs = 0; 3092 break; 3093 }; 3094 3095 if (relocs) { 3096 while (relocs--) { 3097 old = *src++; 3098 3099 switch (old & RELOC_MASK) { 3100 case RELOC_REGISTER: 3101 new = (old & ~RELOC_MASK) + rman_get_start(np->reg_res); 3102 break; 3103 case RELOC_LABEL: 3104 new = (old & ~RELOC_MASK) + np->p_script; 3105 break; 3106 case RELOC_LABELH: 3107 new = (old & ~RELOC_MASK) + np->p_scripth; 3108 break; 3109 case RELOC_SOFTC: 3110 new = (old & ~RELOC_MASK) + vtophys(np); 3111 break; 3112 case RELOC_KVAR: 3113 if (((old & ~RELOC_MASK) < 3114 SCRIPT_KVAR_FIRST) || 3115 ((old & ~RELOC_MASK) > 3116 SCRIPT_KVAR_LAST)) 3117 panic("ncr KVAR out of range"); 3118 new = vtophys(script_kvars[old & 3119 ~RELOC_MASK]); 3120 break; 3121 case 0: 3122 /* Don't relocate a 0 address. */ 3123 if (old == 0) { 3124 new = old; 3125 break; 3126 } 3127 /* fall through */ 3128 default: 3129 panic("ncr_script_copy_and_bind: weird relocation %x @ %d\n", old, (int)(src - start)); 3130 break; 3131 } 3132 3133 WRITESCRIPT_OFF(dst, offset, new); 3134 offset += 4; 3135 } 3136 } else { 3137 WRITESCRIPT_OFF(dst, offset, *src++); 3138 offset += 4; 3139 } 3140 3141 }; 3142 } 3143 3144 /*========================================================== 3145 ** 3146 ** 3147 ** Auto configuration. 3148 ** 3149 ** 3150 **========================================================== 3151 */ 3152 3153 #if 0 3154 /*---------------------------------------------------------- 3155 ** 3156 ** Reduce the transfer length to the max value 3157 ** we can transfer safely. 3158 ** 3159 ** Reading a block greater then MAX_SIZE from the 3160 ** raw (character) device exercises a memory leak 3161 ** in the vm subsystem. This is common to ALL devices. 3162 ** We have submitted a description of this bug to 3163 ** <FreeBSD-bugs@freefall.cdrom.com>. 3164 ** It should be fixed in the current release. 3165 ** 3166 **---------------------------------------------------------- 3167 */ 3168 3169 void ncr_min_phys (struct buf *bp) 3170 { 3171 if ((unsigned long)bp->b_bcount > MAX_SIZE) bp->b_bcount = MAX_SIZE; 3172 } 3173 3174 #endif 3175 3176 #if 0 3177 /*---------------------------------------------------------- 3178 ** 3179 ** Maximal number of outstanding requests per target. 3180 ** 3181 **---------------------------------------------------------- 3182 */ 3183 3184 u_int32_t ncr_info (int unit) 3185 { 3186 return (1); /* may be changed later */ 3187 } 3188 3189 #endif 3190 3191 /*---------------------------------------------------------- 3192 ** 3193 ** NCR chip devices table and chip look up function. 3194 ** Features bit are defined in ncrreg.h. Is it the 3195 ** right place? 3196 ** 3197 **---------------------------------------------------------- 3198 */ 3199 typedef struct { 3200 unsigned long device_id; 3201 unsigned short minrevid; 3202 char *name; 3203 unsigned char maxburst; 3204 unsigned char maxoffs; 3205 unsigned char clock_divn; 3206 unsigned int features; 3207 } ncr_chip; 3208 3209 static ncr_chip ncr_chip_table[] = { 3210 {NCR_810_ID, 0x00, "ncr 53c810 fast10 scsi", 4, 8, 4, 3211 FE_ERL} 3212 , 3213 {NCR_810_ID, 0x10, "ncr 53c810a fast10 scsi", 4, 8, 4, 3214 FE_ERL|FE_LDSTR|FE_PFEN|FE_BOF} 3215 , 3216 {NCR_815_ID, 0x00, "ncr 53c815 fast10 scsi", 4, 8, 4, 3217 FE_ERL|FE_BOF} 3218 , 3219 {NCR_820_ID, 0x00, "ncr 53c820 fast10 wide scsi", 4, 8, 4, 3220 FE_WIDE|FE_ERL} 3221 , 3222 {NCR_825_ID, 0x00, "ncr 53c825 fast10 wide scsi", 4, 8, 4, 3223 FE_WIDE|FE_ERL|FE_BOF} 3224 , 3225 {NCR_825_ID, 0x10, "ncr 53c825a fast10 wide scsi", 7, 8, 4, 3226 FE_WIDE|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3227 , 3228 {NCR_860_ID, 0x00, "ncr 53c860 fast20 scsi", 4, 8, 5, 3229 FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_LDSTR|FE_PFEN} 3230 , 3231 {NCR_875_ID, 0x00, "ncr 53c875 fast20 wide scsi", 7, 16, 5, 3232 FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3233 , 3234 {NCR_875_ID, 0x02, "ncr 53c875 fast20 wide scsi", 7, 16, 5, 3235 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3236 , 3237 {NCR_875_ID2, 0x00, "ncr 53c875j fast20 wide scsi", 7, 16, 5, 3238 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3239 , 3240 {NCR_885_ID, 0x00, "ncr 53c885 fast20 wide scsi", 7, 16, 5, 3241 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3242 , 3243 {NCR_895_ID, 0x00, "ncr 53c895 fast40 wide scsi", 7, 31, 7, 3244 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3245 , 3246 {NCR_896_ID, 0x00, "ncr 53c896 fast40 wide scsi", 7, 31, 7, 3247 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3248 , 3249 {NCR_895A_ID, 0x00, "ncr 53c895a fast40 wide scsi", 7, 31, 7, 3250 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3251 , 3252 {NCR_1510D_ID, 0x00, "ncr 53c1510d fast40 wide scsi", 7, 31, 7, 3253 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3254 }; 3255 3256 static int ncr_chip_lookup(u_long device_id, u_char revision_id) 3257 { 3258 int i, found; 3259 3260 found = -1; 3261 for (i = 0; i < sizeof(ncr_chip_table)/sizeof(ncr_chip_table[0]); i++) { 3262 if (device_id == ncr_chip_table[i].device_id && 3263 ncr_chip_table[i].minrevid <= revision_id) { 3264 if (found < 0 || 3265 ncr_chip_table[found].minrevid 3266 < ncr_chip_table[i].minrevid) { 3267 found = i; 3268 } 3269 } 3270 } 3271 return found; 3272 } 3273 3274 /*---------------------------------------------------------- 3275 ** 3276 ** Probe the hostadapter. 3277 ** 3278 **---------------------------------------------------------- 3279 */ 3280 3281 3282 3283 static int ncr_probe (device_t dev) 3284 { 3285 int i; 3286 3287 i = ncr_chip_lookup(pci_get_devid(dev), pci_get_revid(dev)); 3288 if (i >= 0) { 3289 device_set_desc(dev, ncr_chip_table[i].name); 3290 return (-1000); /* Allows to use both ncr and sym */ 3291 } 3292 3293 return (ENXIO); 3294 } 3295 3296 3297 3298 /*========================================================== 3299 ** 3300 ** NCR chip clock divisor table. 3301 ** Divisors are multiplied by 10,000,000 in order to make 3302 ** calculations more simple. 3303 ** 3304 **========================================================== 3305 */ 3306 3307 #define _5M 5000000 3308 static u_long div_10M[] = 3309 {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M}; 3310 3311 /*=============================================================== 3312 ** 3313 ** NCR chips allow burst lengths of 2, 4, 8, 16, 32, 64, 128 3314 ** transfers. 32,64,128 are only supported by 875 and 895 chips. 3315 ** We use log base 2 (burst length) as internal code, with 3316 ** value 0 meaning "burst disabled". 3317 ** 3318 **=============================================================== 3319 */ 3320 3321 /* 3322 * Burst length from burst code. 3323 */ 3324 #define burst_length(bc) (!(bc))? 0 : 1 << (bc) 3325 3326 /* 3327 * Burst code from io register bits. 3328 */ 3329 #define burst_code(dmode, ctest4, ctest5) \ 3330 (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1 3331 3332 /* 3333 * Set initial io register bits from burst code. 3334 */ 3335 static void 3336 ncr_init_burst(ncb_p np, u_char bc) 3337 { 3338 np->rv_ctest4 &= ~0x80; 3339 np->rv_dmode &= ~(0x3 << 6); 3340 np->rv_ctest5 &= ~0x4; 3341 3342 if (!bc) { 3343 np->rv_ctest4 |= 0x80; 3344 } 3345 else { 3346 --bc; 3347 np->rv_dmode |= ((bc & 0x3) << 6); 3348 np->rv_ctest5 |= (bc & 0x4); 3349 } 3350 } 3351 3352 /*========================================================== 3353 ** 3354 ** 3355 ** Auto configuration: attach and init a host adapter. 3356 ** 3357 ** 3358 **========================================================== 3359 */ 3360 3361 3362 static int 3363 ncr_attach (device_t dev) 3364 { 3365 ncb_p np = (struct ncb*) device_get_softc(dev); 3366 u_char rev = 0; 3367 u_long period; 3368 int i, rid; 3369 u_int8_t usrsync; 3370 u_int8_t usrwide; 3371 struct cam_devq *devq; 3372 3373 /* 3374 ** allocate and initialize structures. 3375 */ 3376 3377 np->unit = device_get_unit(dev); 3378 3379 /* 3380 ** Try to map the controller chip to 3381 ** virtual and physical memory. 3382 */ 3383 3384 np->reg_rid = 0x14; 3385 np->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &np->reg_rid, 3386 0, ~0, 1, RF_ACTIVE); 3387 if (!np->reg_res) { 3388 device_printf(dev, "could not map memory\n"); 3389 return ENXIO; 3390 } 3391 3392 /* 3393 ** Make the controller's registers available. 3394 ** Now the INB INW INL OUTB OUTW OUTL macros 3395 ** can be used safely. 3396 */ 3397 3398 np->bst = rman_get_bustag(np->reg_res); 3399 np->bsh = rman_get_bushandle(np->reg_res); 3400 3401 3402 #ifdef NCR_IOMAPPED 3403 /* 3404 ** Try to map the controller chip into iospace. 3405 */ 3406 3407 if (!pci_map_port (config_id, 0x10, &np->port)) 3408 return; 3409 #endif 3410 3411 3412 /* 3413 ** Save some controller register default values 3414 */ 3415 3416 np->rv_scntl3 = INB(nc_scntl3) & 0x77; 3417 np->rv_dmode = INB(nc_dmode) & 0xce; 3418 np->rv_dcntl = INB(nc_dcntl) & 0xa9; 3419 np->rv_ctest3 = INB(nc_ctest3) & 0x01; 3420 np->rv_ctest4 = INB(nc_ctest4) & 0x88; 3421 np->rv_ctest5 = INB(nc_ctest5) & 0x24; 3422 np->rv_gpcntl = INB(nc_gpcntl); 3423 np->rv_stest2 = INB(nc_stest2) & 0x20; 3424 3425 if (bootverbose >= 2) { 3426 printf ("\tBIOS values: SCNTL3:%02x DMODE:%02x DCNTL:%02x\n", 3427 np->rv_scntl3, np->rv_dmode, np->rv_dcntl); 3428 printf ("\t CTEST3:%02x CTEST4:%02x CTEST5:%02x\n", 3429 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 3430 } 3431 3432 np->rv_dcntl |= NOCOM; 3433 3434 /* 3435 ** Do chip dependent initialization. 3436 */ 3437 3438 rev = pci_get_revid(dev); 3439 3440 /* 3441 ** Get chip features from chips table. 3442 */ 3443 i = ncr_chip_lookup(pci_get_devid(dev), rev); 3444 3445 if (i >= 0) { 3446 np->maxburst = ncr_chip_table[i].maxburst; 3447 np->maxoffs = ncr_chip_table[i].maxoffs; 3448 np->clock_divn = ncr_chip_table[i].clock_divn; 3449 np->features = ncr_chip_table[i].features; 3450 } else { /* Should'nt happen if probe() is ok */ 3451 np->maxburst = 4; 3452 np->maxoffs = 8; 3453 np->clock_divn = 4; 3454 np->features = FE_ERL; 3455 } 3456 3457 np->maxwide = np->features & FE_WIDE ? 1 : 0; 3458 np->clock_khz = np->features & FE_CLK80 ? 80000 : 40000; 3459 if (np->features & FE_QUAD) np->multiplier = 4; 3460 else if (np->features & FE_DBLR) np->multiplier = 2; 3461 else np->multiplier = 1; 3462 3463 /* 3464 ** Get the frequency of the chip's clock. 3465 ** Find the right value for scntl3. 3466 */ 3467 if (np->features & (FE_ULTRA|FE_ULTRA2)) 3468 ncr_getclock(np, np->multiplier); 3469 3470 #ifdef NCR_TEKRAM_EEPROM 3471 if (bootverbose) { 3472 printf ("%s: Tekram EEPROM read %s\n", 3473 ncr_name(np), 3474 read_tekram_eeprom (np, NULL) ? 3475 "succeeded" : "failed"); 3476 } 3477 #endif /* NCR_TEKRAM_EEPROM */ 3478 3479 /* 3480 * If scntl3 != 0, we assume BIOS is present. 3481 */ 3482 if (np->rv_scntl3) 3483 np->features |= FE_BIOS; 3484 3485 /* 3486 * Divisor to be used for async (timer pre-scaler). 3487 */ 3488 i = np->clock_divn - 1; 3489 while (i >= 0) { 3490 --i; 3491 if (10ul * SCSI_NCR_MIN_ASYNC * np->clock_khz > div_10M[i]) { 3492 ++i; 3493 break; 3494 } 3495 } 3496 np->rv_scntl3 = i+1; 3497 3498 /* 3499 * Minimum synchronous period factor supported by the chip. 3500 * Btw, 'period' is in tenths of nanoseconds. 3501 */ 3502 3503 period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz; 3504 if (period <= 250) np->minsync = 10; 3505 else if (period <= 303) np->minsync = 11; 3506 else if (period <= 500) np->minsync = 12; 3507 else np->minsync = (period + 40 - 1) / 40; 3508 3509 /* 3510 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2). 3511 */ 3512 3513 if (np->minsync < 25 && !(np->features & (FE_ULTRA|FE_ULTRA2))) 3514 np->minsync = 25; 3515 else if (np->minsync < 12 && !(np->features & FE_ULTRA2)) 3516 np->minsync = 12; 3517 3518 /* 3519 * Maximum synchronous period factor supported by the chip. 3520 */ 3521 3522 period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz); 3523 np->maxsync = period > 2540 ? 254 : period / 10; 3524 3525 /* 3526 * Now, some features available with Symbios compatible boards. 3527 * LED support through GPIO0 and DIFF support. 3528 */ 3529 3530 #ifdef SCSI_NCR_SYMBIOS_COMPAT 3531 if (!(np->rv_gpcntl & 0x01)) 3532 np->features |= FE_LED0; 3533 #if 0 /* Not safe enough without NVRAM support or user settable option */ 3534 if (!(INB(nc_gpreg) & 0x08)) 3535 np->features |= FE_DIFF; 3536 #endif 3537 #endif /* SCSI_NCR_SYMBIOS_COMPAT */ 3538 3539 /* 3540 * Prepare initial IO registers settings. 3541 * Trust BIOS only if we believe we have one and if we want to. 3542 */ 3543 #ifdef SCSI_NCR_TRUST_BIOS 3544 if (!(np->features & FE_BIOS)) { 3545 #else 3546 if (1) { 3547 #endif 3548 np->rv_dmode = 0; 3549 np->rv_dcntl = NOCOM; 3550 np->rv_ctest3 = 0; 3551 np->rv_ctest4 = MPEE; 3552 np->rv_ctest5 = 0; 3553 np->rv_stest2 = 0; 3554 3555 if (np->features & FE_ERL) 3556 np->rv_dmode |= ERL; /* Enable Read Line */ 3557 if (np->features & FE_BOF) 3558 np->rv_dmode |= BOF; /* Burst Opcode Fetch */ 3559 if (np->features & FE_ERMP) 3560 np->rv_dmode |= ERMP; /* Enable Read Multiple */ 3561 if (np->features & FE_CLSE) 3562 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */ 3563 if (np->features & FE_WRIE) 3564 np->rv_ctest3 |= WRIE; /* Write and Invalidate */ 3565 if (np->features & FE_PFEN) 3566 np->rv_dcntl |= PFEN; /* Prefetch Enable */ 3567 if (np->features & FE_DFS) 3568 np->rv_ctest5 |= DFS; /* Dma Fifo Size */ 3569 if (np->features & FE_DIFF) 3570 np->rv_stest2 |= 0x20; /* Differential mode */ 3571 ncr_init_burst(np, np->maxburst); /* Max dwords burst length */ 3572 } else { 3573 np->maxburst = 3574 burst_code(np->rv_dmode, np->rv_ctest4, np->rv_ctest5); 3575 } 3576 3577 /* 3578 ** Get on-chip SRAM address, if supported 3579 */ 3580 if ((np->features & FE_RAM) && sizeof(struct script) <= 4096) { 3581 np->sram_rid = 0x18; 3582 np->sram_res = bus_alloc_resource(dev, SYS_RES_MEMORY, 3583 &np->sram_rid, 3584 0, ~0, 1, RF_ACTIVE); 3585 } 3586 3587 /* 3588 ** Allocate structure for script relocation. 3589 */ 3590 if (np->sram_res != NULL) { 3591 np->script = NULL; 3592 np->p_script = rman_get_start(np->sram_res); 3593 np->bst2 = rman_get_bustag(np->sram_res); 3594 np->bsh2 = rman_get_bushandle(np->sram_res); 3595 } else if (sizeof (struct script) > PAGE_SIZE) { 3596 np->script = (struct script*) vm_page_alloc_contig 3597 (round_page(sizeof (struct script)), 3598 0, 0xffffffff, PAGE_SIZE); 3599 } else { 3600 np->script = (struct script *) 3601 malloc (sizeof (struct script), M_DEVBUF, M_WAITOK); 3602 } 3603 3604 /* XXX JGibbs - Use contigmalloc */ 3605 if (sizeof (struct scripth) > PAGE_SIZE) { 3606 np->scripth = (struct scripth*) vm_page_alloc_contig 3607 (round_page(sizeof (struct scripth)), 3608 0, 0xffffffff, PAGE_SIZE); 3609 } else 3610 { 3611 np->scripth = (struct scripth *) 3612 malloc (sizeof (struct scripth), M_DEVBUF, M_WAITOK); 3613 } 3614 3615 #ifdef SCSI_NCR_PCI_CONFIG_FIXUP 3616 /* 3617 ** If cache line size is enabled, check PCI config space and 3618 ** try to fix it up if necessary. 3619 */ 3620 #ifdef PCIR_CACHELNSZ /* To be sure that new PCI stuff is present */ 3621 { 3622 u_char cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 3623 u_short command = pci_read_config(dev, PCIR_COMMAND, 2); 3624 3625 if (!cachelnsz) { 3626 cachelnsz = 8; 3627 printf("%s: setting PCI cache line size register to %d.\n", 3628 ncr_name(np), (int)cachelnsz); 3629 pci_write_config(dev, PCIR_CACHELNSZ, cachelnsz, 1); 3630 } 3631 3632 if (!(command & (1<<4))) { 3633 command |= (1<<4); 3634 printf("%s: setting PCI command write and invalidate.\n", 3635 ncr_name(np)); 3636 pci_write_config(dev, PCIR_COMMAND, command, 2); 3637 } 3638 } 3639 #endif /* PCIR_CACHELNSZ */ 3640 3641 #endif /* SCSI_NCR_PCI_CONFIG_FIXUP */ 3642 3643 /* Initialize per-target user settings */ 3644 usrsync = 0; 3645 if (SCSI_NCR_DFLT_SYNC) { 3646 usrsync = SCSI_NCR_DFLT_SYNC; 3647 if (usrsync > np->maxsync) 3648 usrsync = np->maxsync; 3649 if (usrsync < np->minsync) 3650 usrsync = np->minsync; 3651 }; 3652 3653 usrwide = (SCSI_NCR_MAX_WIDE); 3654 if (usrwide > np->maxwide) usrwide=np->maxwide; 3655 3656 for (i=0;i<MAX_TARGET;i++) { 3657 tcb_p tp = &np->target[i]; 3658 3659 tp->tinfo.user.period = usrsync; 3660 tp->tinfo.user.offset = usrsync != 0 ? np->maxoffs : 0; 3661 tp->tinfo.user.width = usrwide; 3662 tp->tinfo.disc_tag = NCR_CUR_DISCENB 3663 | NCR_CUR_TAGENB 3664 | NCR_USR_DISCENB 3665 | NCR_USR_TAGENB; 3666 } 3667 3668 /* 3669 ** Bells and whistles ;-) 3670 */ 3671 if (bootverbose) 3672 printf("%s: minsync=%d, maxsync=%d, maxoffs=%d, %d dwords burst, %s dma fifo\n", 3673 ncr_name(np), np->minsync, np->maxsync, np->maxoffs, 3674 burst_length(np->maxburst), 3675 (np->rv_ctest5 & DFS) ? "large" : "normal"); 3676 3677 /* 3678 ** Print some complementary information that can be helpfull. 3679 */ 3680 if (bootverbose) 3681 printf("%s: %s, %s IRQ driver%s\n", 3682 ncr_name(np), 3683 np->rv_stest2 & 0x20 ? "differential" : "single-ended", 3684 np->rv_dcntl & IRQM ? "totem pole" : "open drain", 3685 np->sram_res ? ", using on-chip SRAM" : ""); 3686 3687 /* 3688 ** Patch scripts to physical addresses 3689 */ 3690 ncr_script_fill (&script0, &scripth0); 3691 3692 if (np->script) 3693 np->p_script = vtophys(np->script); 3694 np->p_scripth = vtophys(np->scripth); 3695 3696 ncr_script_copy_and_bind (np, (ncrcmd *) &script0, 3697 (ncrcmd *) np->script, sizeof(struct script)); 3698 3699 ncr_script_copy_and_bind (np, (ncrcmd *) &scripth0, 3700 (ncrcmd *) np->scripth, sizeof(struct scripth)); 3701 3702 /* 3703 ** Patch the script for LED support. 3704 */ 3705 3706 if (np->features & FE_LED0) { 3707 WRITESCRIPT(reselect[0], SCR_REG_REG(gpreg, SCR_OR, 0x01)); 3708 WRITESCRIPT(reselect1[0], SCR_REG_REG(gpreg, SCR_AND, 0xfe)); 3709 WRITESCRIPT(reselect2[0], SCR_REG_REG(gpreg, SCR_AND, 0xfe)); 3710 } 3711 3712 /* 3713 ** init data structure 3714 */ 3715 3716 np->jump_tcb.l_cmd = SCR_JUMP; 3717 np->jump_tcb.l_paddr = NCB_SCRIPTH_PHYS (np, abort); 3718 3719 /* 3720 ** Get SCSI addr of host adapter (set by bios?). 3721 */ 3722 3723 np->myaddr = INB(nc_scid) & 0x07; 3724 if (!np->myaddr) np->myaddr = SCSI_NCR_MYADDR; 3725 3726 #ifdef NCR_DUMP_REG 3727 /* 3728 ** Log the initial register contents 3729 */ 3730 { 3731 int reg; 3732 for (reg=0; reg<256; reg+=4) { 3733 if (reg%16==0) printf ("reg[%2x]", reg); 3734 printf (" %08x", (int)pci_conf_read (config_id, reg)); 3735 if (reg%16==12) printf ("\n"); 3736 } 3737 } 3738 #endif /* NCR_DUMP_REG */ 3739 3740 /* 3741 ** Reset chip. 3742 */ 3743 3744 OUTB (nc_istat, SRST); 3745 DELAY (1000); 3746 OUTB (nc_istat, 0 ); 3747 3748 3749 /* 3750 ** Now check the cache handling of the pci chipset. 3751 */ 3752 3753 if (ncr_snooptest (np)) { 3754 printf ("CACHE INCORRECTLY CONFIGURED.\n"); 3755 return EINVAL; 3756 }; 3757 3758 /* 3759 ** Install the interrupt handler. 3760 */ 3761 3762 rid = 0; 3763 np->irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, 3764 RF_SHAREABLE | RF_ACTIVE); 3765 if (np->irq_res == NULL) { 3766 device_printf(dev, 3767 "interruptless mode: reduced performance.\n"); 3768 } else { 3769 bus_setup_intr(dev, np->irq_res, INTR_TYPE_CAM, 3770 ncr_intr, np, &np->irq_handle, NULL); 3771 } 3772 3773 /* 3774 ** Create the device queue. We only allow MAX_START-1 concurrent 3775 ** transactions so we can be sure to have one element free in our 3776 ** start queue to reset to the idle loop. 3777 */ 3778 devq = cam_simq_alloc(MAX_START - 1); 3779 if (devq == NULL) 3780 return ENOMEM; 3781 3782 /* 3783 ** Now tell the generic SCSI layer 3784 ** about our bus. 3785 */ 3786 np->sim = cam_sim_alloc(ncr_action, ncr_poll, "ncr", np, np->unit, 3787 1, MAX_TAGS, devq); 3788 cam_simq_release(devq); 3789 if (np->sim == NULL) 3790 return ENOMEM; 3791 3792 3793 if (xpt_bus_register(np->sim, 0) != CAM_SUCCESS) { 3794 cam_sim_free(np->sim); 3795 return ENOMEM; 3796 } 3797 3798 if (xpt_create_path(&np->path, /*periph*/NULL, 3799 cam_sim_path(np->sim), CAM_TARGET_WILDCARD, 3800 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 3801 xpt_bus_deregister(cam_sim_path(np->sim)); 3802 cam_sim_free(np->sim); 3803 return ENOMEM; 3804 } 3805 3806 /* 3807 ** start the timeout daemon 3808 */ 3809 callout_init(&np->timeout_ch); 3810 ncr_timeout (np); 3811 np->lasttime=0; 3812 3813 return 0; 3814 } 3815 3816 /*========================================================== 3817 ** 3818 ** 3819 ** Process pending device interrupts. 3820 ** 3821 ** 3822 **========================================================== 3823 */ 3824 3825 static void 3826 ncr_intr(vnp) 3827 void *vnp; 3828 { 3829 ncb_p np = vnp; 3830 crit_enter(); 3831 3832 if (DEBUG_FLAGS & DEBUG_TINY) printf ("["); 3833 3834 if (INB(nc_istat) & (INTF|SIP|DIP)) { 3835 /* 3836 ** Repeat until no outstanding ints 3837 */ 3838 do { 3839 ncr_exception (np); 3840 } while (INB(nc_istat) & (INTF|SIP|DIP)); 3841 3842 np->ticks = 100; 3843 }; 3844 3845 if (DEBUG_FLAGS & DEBUG_TINY) printf ("]\n"); 3846 3847 crit_exit(); 3848 } 3849 3850 /*========================================================== 3851 ** 3852 ** 3853 ** Start execution of a SCSI command. 3854 ** This is called from the generic SCSI driver. 3855 ** 3856 ** 3857 **========================================================== 3858 */ 3859 3860 static void 3861 ncr_action (struct cam_sim *sim, union ccb *ccb) 3862 { 3863 ncb_p np; 3864 3865 np = (ncb_p) cam_sim_softc(sim); 3866 3867 switch (ccb->ccb_h.func_code) { 3868 /* Common cases first */ 3869 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 3870 { 3871 nccb_p cp; 3872 lcb_p lp; 3873 tcb_p tp; 3874 struct ccb_scsiio *csio; 3875 u_int8_t *msgptr; 3876 u_int msglen; 3877 u_int msglen2; 3878 int segments; 3879 u_int8_t nego; 3880 u_int8_t idmsg; 3881 int qidx; 3882 3883 tp = &np->target[ccb->ccb_h.target_id]; 3884 csio = &ccb->csio; 3885 3886 crit_enter(); 3887 3888 /* 3889 * Last time we need to check if this CCB needs to 3890 * be aborted. 3891 */ 3892 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 3893 xpt_done(ccb); 3894 crit_exit(); 3895 return; 3896 } 3897 ccb->ccb_h.status |= CAM_SIM_QUEUED; 3898 3899 /*--------------------------------------------------- 3900 ** 3901 ** Assign an nccb / bind ccb 3902 ** 3903 **---------------------------------------------------- 3904 */ 3905 cp = ncr_get_nccb (np, ccb->ccb_h.target_id, 3906 ccb->ccb_h.target_lun); 3907 if (cp == NULL) { 3908 /* XXX JGibbs - Freeze SIMQ */ 3909 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 3910 xpt_done(ccb); 3911 return; 3912 }; 3913 3914 cp->ccb = ccb; 3915 3916 /*--------------------------------------------------- 3917 ** 3918 ** timestamp 3919 ** 3920 **---------------------------------------------------- 3921 */ 3922 /* 3923 ** XXX JGibbs - Isn't this expensive 3924 ** enough to be conditionalized?? 3925 */ 3926 3927 bzero (&cp->phys.header.stamp, sizeof (struct tstamp)); 3928 cp->phys.header.stamp.start = ticks; 3929 3930 nego = 0; 3931 if (tp->nego_cp == NULL) { 3932 3933 if (tp->tinfo.current.width 3934 != tp->tinfo.goal.width) { 3935 tp->nego_cp = cp; 3936 nego = NS_WIDE; 3937 } else if ((tp->tinfo.current.period 3938 != tp->tinfo.goal.period) 3939 || (tp->tinfo.current.offset 3940 != tp->tinfo.goal.offset)) { 3941 tp->nego_cp = cp; 3942 nego = NS_SYNC; 3943 }; 3944 }; 3945 3946 /*--------------------------------------------------- 3947 ** 3948 ** choose a new tag ... 3949 ** 3950 **---------------------------------------------------- 3951 */ 3952 lp = tp->lp[ccb->ccb_h.target_lun]; 3953 3954 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 3955 && (ccb->csio.tag_action != CAM_TAG_ACTION_NONE) 3956 && (nego == 0)) { 3957 /* 3958 ** assign a tag to this nccb 3959 */ 3960 while (!cp->tag) { 3961 nccb_p cp2 = lp->next_nccb; 3962 lp->lasttag = lp->lasttag % 255 + 1; 3963 while (cp2 && cp2->tag != lp->lasttag) 3964 cp2 = cp2->next_nccb; 3965 if (cp2) continue; 3966 cp->tag=lp->lasttag; 3967 if (DEBUG_FLAGS & DEBUG_TAGS) { 3968 PRINT_ADDR(ccb); 3969 printf ("using tag #%d.\n", cp->tag); 3970 }; 3971 }; 3972 } else { 3973 cp->tag=0; 3974 }; 3975 3976 /*---------------------------------------------------- 3977 ** 3978 ** Build the identify / tag / sdtr message 3979 ** 3980 **---------------------------------------------------- 3981 */ 3982 idmsg = MSG_IDENTIFYFLAG | ccb->ccb_h.target_lun; 3983 if (tp->tinfo.disc_tag & NCR_CUR_DISCENB) 3984 idmsg |= MSG_IDENTIFY_DISCFLAG; 3985 3986 msgptr = cp->scsi_smsg; 3987 msglen = 0; 3988 msgptr[msglen++] = idmsg; 3989 3990 if (cp->tag) { 3991 msgptr[msglen++] = ccb->csio.tag_action; 3992 msgptr[msglen++] = cp->tag; 3993 } 3994 3995 switch (nego) { 3996 case NS_SYNC: 3997 msgptr[msglen++] = MSG_EXTENDED; 3998 msgptr[msglen++] = MSG_EXT_SDTR_LEN; 3999 msgptr[msglen++] = MSG_EXT_SDTR; 4000 msgptr[msglen++] = tp->tinfo.goal.period; 4001 msgptr[msglen++] = tp->tinfo.goal.offset;; 4002 if (DEBUG_FLAGS & DEBUG_NEGO) { 4003 PRINT_ADDR(ccb); 4004 printf ("sync msgout: "); 4005 ncr_show_msg (&cp->scsi_smsg [msglen-5]); 4006 printf (".\n"); 4007 }; 4008 break; 4009 case NS_WIDE: 4010 msgptr[msglen++] = MSG_EXTENDED; 4011 msgptr[msglen++] = MSG_EXT_WDTR_LEN; 4012 msgptr[msglen++] = MSG_EXT_WDTR; 4013 msgptr[msglen++] = tp->tinfo.goal.width; 4014 if (DEBUG_FLAGS & DEBUG_NEGO) { 4015 PRINT_ADDR(ccb); 4016 printf ("wide msgout: "); 4017 ncr_show_msg (&cp->scsi_smsg [msglen-4]); 4018 printf (".\n"); 4019 }; 4020 break; 4021 }; 4022 4023 /*---------------------------------------------------- 4024 ** 4025 ** Build the identify message for getcc. 4026 ** 4027 **---------------------------------------------------- 4028 */ 4029 4030 cp->scsi_smsg2 [0] = idmsg; 4031 msglen2 = 1; 4032 4033 /*---------------------------------------------------- 4034 ** 4035 ** Build the data descriptors 4036 ** 4037 **---------------------------------------------------- 4038 */ 4039 4040 /* XXX JGibbs - Handle other types of I/O */ 4041 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 4042 segments = ncr_scatter(&cp->phys, 4043 (vm_offset_t)csio->data_ptr, 4044 (vm_size_t)csio->dxfer_len); 4045 4046 if (segments < 0) { 4047 ccb->ccb_h.status = CAM_REQ_TOO_BIG; 4048 ncr_free_nccb(np, cp); 4049 crit_exit(); 4050 xpt_done(ccb); 4051 return; 4052 } 4053 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 4054 cp->phys.header.savep = NCB_SCRIPT_PHYS (np, data_in); 4055 cp->phys.header.goalp = cp->phys.header.savep +20 +segments*16; 4056 } else { /* CAM_DIR_OUT */ 4057 cp->phys.header.savep = NCB_SCRIPT_PHYS (np, data_out); 4058 cp->phys.header.goalp = cp->phys.header.savep +20 +segments*16; 4059 } 4060 } else { 4061 cp->phys.header.savep = NCB_SCRIPT_PHYS (np, no_data); 4062 cp->phys.header.goalp = cp->phys.header.savep; 4063 } 4064 4065 cp->phys.header.lastp = cp->phys.header.savep; 4066 4067 4068 /*---------------------------------------------------- 4069 ** 4070 ** fill in nccb 4071 ** 4072 **---------------------------------------------------- 4073 ** 4074 ** 4075 ** physical -> virtual backlink 4076 ** Generic SCSI command 4077 */ 4078 cp->phys.header.cp = cp; 4079 /* 4080 ** Startqueue 4081 */ 4082 cp->phys.header.launch.l_paddr = NCB_SCRIPT_PHYS (np, select); 4083 cp->phys.header.launch.l_cmd = SCR_JUMP; 4084 /* 4085 ** select 4086 */ 4087 cp->phys.select.sel_id = ccb->ccb_h.target_id; 4088 cp->phys.select.sel_scntl3 = tp->tinfo.wval; 4089 cp->phys.select.sel_sxfer = tp->tinfo.sval; 4090 /* 4091 ** message 4092 */ 4093 cp->phys.smsg.addr = CCB_PHYS (cp, scsi_smsg); 4094 cp->phys.smsg.size = msglen; 4095 4096 cp->phys.smsg2.addr = CCB_PHYS (cp, scsi_smsg2); 4097 cp->phys.smsg2.size = msglen2; 4098 /* 4099 ** command 4100 */ 4101 /* XXX JGibbs - Support other command types */ 4102 cp->phys.cmd.addr = vtophys (csio->cdb_io.cdb_bytes); 4103 cp->phys.cmd.size = csio->cdb_len; 4104 /* 4105 ** sense command 4106 */ 4107 cp->phys.scmd.addr = CCB_PHYS (cp, sensecmd); 4108 cp->phys.scmd.size = 6; 4109 /* 4110 ** patch requested size into sense command 4111 */ 4112 cp->sensecmd[0] = 0x03; 4113 cp->sensecmd[1] = ccb->ccb_h.target_lun << 5; 4114 cp->sensecmd[4] = sizeof(struct scsi_sense_data); 4115 cp->sensecmd[4] = csio->sense_len; 4116 /* 4117 ** sense data 4118 */ 4119 cp->phys.sense.addr = vtophys (&csio->sense_data); 4120 cp->phys.sense.size = csio->sense_len; 4121 /* 4122 ** status 4123 */ 4124 cp->actualquirks = QUIRK_NOMSG; 4125 cp->host_status = nego ? HS_NEGOTIATE : HS_BUSY; 4126 cp->s_status = SCSI_STATUS_ILLEGAL; 4127 cp->parity_status = 0; 4128 4129 cp->xerr_status = XE_OK; 4130 cp->sync_status = tp->tinfo.sval; 4131 cp->nego_status = nego; 4132 cp->wide_status = tp->tinfo.wval; 4133 4134 /*---------------------------------------------------- 4135 ** 4136 ** Critical region: start this job. 4137 ** 4138 **---------------------------------------------------- 4139 */ 4140 4141 /* 4142 ** reselect pattern and activate this job. 4143 */ 4144 4145 cp->jump_nccb.l_cmd = (SCR_JUMP ^ IFFALSE (DATA (cp->tag))); 4146 cp->tlimit = time_second 4147 + ccb->ccb_h.timeout / 1000 + 2; 4148 cp->magic = CCB_MAGIC; 4149 4150 /* 4151 ** insert into start queue. 4152 */ 4153 4154 qidx = np->squeueput + 1; 4155 if (qidx >= MAX_START) 4156 qidx = 0; 4157 np->squeue [qidx ] = NCB_SCRIPT_PHYS (np, idle); 4158 np->squeue [np->squeueput] = CCB_PHYS (cp, phys); 4159 np->squeueput = qidx; 4160 4161 if(DEBUG_FLAGS & DEBUG_QUEUE) 4162 printf("%s: queuepos=%d tryoffset=%d.\n", 4163 ncr_name (np), np->squeueput, 4164 (unsigned)(READSCRIPT(startpos[0]) - 4165 (NCB_SCRIPTH_PHYS (np, tryloop)))); 4166 4167 /* 4168 ** Script processor may be waiting for reselect. 4169 ** Wake it up. 4170 */ 4171 OUTB (nc_istat, SIGP); 4172 4173 /* 4174 ** and reenable interrupts 4175 */ 4176 crit_exit(); 4177 break; 4178 } 4179 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 4180 case XPT_EN_LUN: /* Enable LUN as a target */ 4181 case XPT_TARGET_IO: /* Execute target I/O request */ 4182 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 4183 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 4184 case XPT_ABORT: /* Abort the specified CCB */ 4185 /* XXX Implement */ 4186 ccb->ccb_h.status = CAM_REQ_INVALID; 4187 xpt_done(ccb); 4188 break; 4189 case XPT_SET_TRAN_SETTINGS: 4190 { 4191 struct ccb_trans_settings *cts; 4192 tcb_p tp; 4193 u_int update_type; 4194 4195 cts = &ccb->cts; 4196 update_type = 0; 4197 if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) 4198 update_type |= NCR_TRANS_GOAL; 4199 if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) 4200 update_type |= NCR_TRANS_USER; 4201 4202 crit_enter(); 4203 tp = &np->target[ccb->ccb_h.target_id]; 4204 /* Tag and disc enables */ 4205 if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) { 4206 if (update_type & NCR_TRANS_GOAL) { 4207 if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) 4208 tp->tinfo.disc_tag |= NCR_CUR_DISCENB; 4209 else 4210 tp->tinfo.disc_tag &= ~NCR_CUR_DISCENB; 4211 } 4212 4213 if (update_type & NCR_TRANS_USER) { 4214 if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) 4215 tp->tinfo.disc_tag |= NCR_USR_DISCENB; 4216 else 4217 tp->tinfo.disc_tag &= ~NCR_USR_DISCENB; 4218 } 4219 4220 } 4221 4222 if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) { 4223 if (update_type & NCR_TRANS_GOAL) { 4224 if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) 4225 tp->tinfo.disc_tag |= NCR_CUR_TAGENB; 4226 else 4227 tp->tinfo.disc_tag &= ~NCR_CUR_TAGENB; 4228 } 4229 4230 if (update_type & NCR_TRANS_USER) { 4231 if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) 4232 tp->tinfo.disc_tag |= NCR_USR_TAGENB; 4233 else 4234 tp->tinfo.disc_tag &= ~NCR_USR_TAGENB; 4235 } 4236 } 4237 4238 /* Filter bus width and sync negotiation settings */ 4239 if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) { 4240 if (cts->bus_width > np->maxwide) 4241 cts->bus_width = np->maxwide; 4242 } 4243 4244 if (((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) 4245 || ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)) { 4246 if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) { 4247 if (cts->sync_period != 0 4248 && (cts->sync_period < np->minsync)) 4249 cts->sync_period = np->minsync; 4250 } 4251 if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0) { 4252 if (cts->sync_offset == 0) 4253 cts->sync_period = 0; 4254 if (cts->sync_offset > np->maxoffs) 4255 cts->sync_offset = np->maxoffs; 4256 } 4257 } 4258 if ((update_type & NCR_TRANS_USER) != 0) { 4259 if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) 4260 tp->tinfo.user.period = cts->sync_period; 4261 if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0) 4262 tp->tinfo.user.offset = cts->sync_offset; 4263 if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) 4264 tp->tinfo.user.width = cts->bus_width; 4265 } 4266 if ((update_type & NCR_TRANS_GOAL) != 0) { 4267 if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) 4268 tp->tinfo.goal.period = cts->sync_period; 4269 4270 if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0) 4271 tp->tinfo.goal.offset = cts->sync_offset; 4272 4273 if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) 4274 tp->tinfo.goal.width = cts->bus_width; 4275 } 4276 crit_exit(); 4277 ccb->ccb_h.status = CAM_REQ_CMP; 4278 xpt_done(ccb); 4279 break; 4280 } 4281 case XPT_GET_TRAN_SETTINGS: 4282 /* Get default/user set transfer settings for the target */ 4283 { 4284 struct ccb_trans_settings *cts; 4285 struct ncr_transinfo *tinfo; 4286 tcb_p tp; 4287 4288 cts = &ccb->cts; 4289 tp = &np->target[ccb->ccb_h.target_id]; 4290 4291 crit_enter(); 4292 if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) { 4293 tinfo = &tp->tinfo.current; 4294 if (tp->tinfo.disc_tag & NCR_CUR_DISCENB) 4295 cts->flags |= CCB_TRANS_DISC_ENB; 4296 else 4297 cts->flags &= ~CCB_TRANS_DISC_ENB; 4298 4299 if (tp->tinfo.disc_tag & NCR_CUR_TAGENB) 4300 cts->flags |= CCB_TRANS_TAG_ENB; 4301 else 4302 cts->flags &= ~CCB_TRANS_TAG_ENB; 4303 } else { 4304 tinfo = &tp->tinfo.user; 4305 if (tp->tinfo.disc_tag & NCR_USR_DISCENB) 4306 cts->flags |= CCB_TRANS_DISC_ENB; 4307 else 4308 cts->flags &= ~CCB_TRANS_DISC_ENB; 4309 4310 if (tp->tinfo.disc_tag & NCR_USR_TAGENB) 4311 cts->flags |= CCB_TRANS_TAG_ENB; 4312 else 4313 cts->flags &= ~CCB_TRANS_TAG_ENB; 4314 } 4315 4316 cts->sync_period = tinfo->period; 4317 cts->sync_offset = tinfo->offset; 4318 cts->bus_width = tinfo->width; 4319 4320 crit_exit(); 4321 4322 cts->valid = CCB_TRANS_SYNC_RATE_VALID 4323 | CCB_TRANS_SYNC_OFFSET_VALID 4324 | CCB_TRANS_BUS_WIDTH_VALID 4325 | CCB_TRANS_DISC_VALID 4326 | CCB_TRANS_TQ_VALID; 4327 4328 ccb->ccb_h.status = CAM_REQ_CMP; 4329 xpt_done(ccb); 4330 break; 4331 } 4332 case XPT_CALC_GEOMETRY: 4333 { 4334 struct ccb_calc_geometry *ccg; 4335 u_int32_t size_mb; 4336 u_int32_t secs_per_cylinder; 4337 int extended; 4338 4339 /* XXX JGibbs - I'm sure the NCR uses a different strategy, 4340 * but it should be able to deal with Adaptec 4341 * geometry too. 4342 */ 4343 extended = 1; 4344 ccg = &ccb->ccg; 4345 size_mb = ccg->volume_size 4346 / ((1024L * 1024L) / ccg->block_size); 4347 4348 if (size_mb > 1024 && extended) { 4349 ccg->heads = 255; 4350 ccg->secs_per_track = 63; 4351 } else { 4352 ccg->heads = 64; 4353 ccg->secs_per_track = 32; 4354 } 4355 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 4356 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 4357 ccb->ccb_h.status = CAM_REQ_CMP; 4358 xpt_done(ccb); 4359 break; 4360 } 4361 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 4362 { 4363 OUTB (nc_scntl1, CRST); 4364 ccb->ccb_h.status = CAM_REQ_CMP; 4365 DELAY(10000); /* Wait until our interrupt handler sees it */ 4366 xpt_done(ccb); 4367 break; 4368 } 4369 case XPT_TERM_IO: /* Terminate the I/O process */ 4370 /* XXX Implement */ 4371 ccb->ccb_h.status = CAM_REQ_INVALID; 4372 xpt_done(ccb); 4373 break; 4374 case XPT_PATH_INQ: /* Path routing inquiry */ 4375 { 4376 struct ccb_pathinq *cpi = &ccb->cpi; 4377 4378 cpi->version_num = 1; /* XXX??? */ 4379 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 4380 if ((np->features & FE_WIDE) != 0) 4381 cpi->hba_inquiry |= PI_WIDE_16; 4382 cpi->target_sprt = 0; 4383 cpi->hba_misc = 0; 4384 cpi->hba_eng_cnt = 0; 4385 cpi->max_target = (np->features & FE_WIDE) ? 15 : 7; 4386 cpi->max_lun = MAX_LUN - 1; 4387 cpi->initiator_id = np->myaddr; 4388 cpi->bus_id = cam_sim_bus(sim); 4389 cpi->base_transfer_speed = 3300; 4390 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 4391 strncpy(cpi->hba_vid, "Symbios", HBA_IDLEN); 4392 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 4393 cpi->unit_number = cam_sim_unit(sim); 4394 cpi->ccb_h.status = CAM_REQ_CMP; 4395 xpt_done(ccb); 4396 break; 4397 } 4398 default: 4399 ccb->ccb_h.status = CAM_REQ_INVALID; 4400 xpt_done(ccb); 4401 break; 4402 } 4403 } 4404 4405 /*========================================================== 4406 ** 4407 ** 4408 ** Complete execution of a SCSI command. 4409 ** Signal completion to the generic SCSI driver. 4410 ** 4411 ** 4412 **========================================================== 4413 */ 4414 4415 void 4416 ncr_complete (ncb_p np, nccb_p cp) 4417 { 4418 union ccb *ccb; 4419 tcb_p tp; 4420 lcb_p lp; 4421 4422 /* 4423 ** Sanity check 4424 */ 4425 4426 if (!cp || (cp->magic!=CCB_MAGIC) || !cp->ccb) return; 4427 cp->magic = 1; 4428 cp->tlimit= 0; 4429 4430 /* 4431 ** No Reselect anymore. 4432 */ 4433 cp->jump_nccb.l_cmd = (SCR_JUMP); 4434 4435 /* 4436 ** No starting. 4437 */ 4438 cp->phys.header.launch.l_paddr= NCB_SCRIPT_PHYS (np, idle); 4439 4440 /* 4441 ** timestamp 4442 */ 4443 ncb_profile (np, cp); 4444 4445 if (DEBUG_FLAGS & DEBUG_TINY) 4446 printf ("CCB=%x STAT=%x/%x\n", (int)(intptr_t)cp & 0xfff, 4447 cp->host_status,cp->s_status); 4448 4449 ccb = cp->ccb; 4450 cp->ccb = NULL; 4451 tp = &np->target[ccb->ccb_h.target_id]; 4452 lp = tp->lp[ccb->ccb_h.target_lun]; 4453 4454 /* 4455 ** We do not queue more than 1 nccb per target 4456 ** with negotiation at any time. If this nccb was 4457 ** used for negotiation, clear this info in the tcb. 4458 */ 4459 4460 if (cp == tp->nego_cp) 4461 tp->nego_cp = NULL; 4462 4463 /* 4464 ** Check for parity errors. 4465 */ 4466 /* XXX JGibbs - What about reporting them??? */ 4467 4468 if (cp->parity_status) { 4469 PRINT_ADDR(ccb); 4470 printf ("%d parity error(s), fallback.\n", cp->parity_status); 4471 /* 4472 ** fallback to asynch transfer. 4473 */ 4474 tp->tinfo.goal.period = 0; 4475 tp->tinfo.goal.offset = 0; 4476 }; 4477 4478 /* 4479 ** Check for extended errors. 4480 */ 4481 4482 if (cp->xerr_status != XE_OK) { 4483 PRINT_ADDR(ccb); 4484 switch (cp->xerr_status) { 4485 case XE_EXTRA_DATA: 4486 printf ("extraneous data discarded.\n"); 4487 break; 4488 case XE_BAD_PHASE: 4489 printf ("illegal scsi phase (4/5).\n"); 4490 break; 4491 default: 4492 printf ("extended error %d.\n", cp->xerr_status); 4493 break; 4494 }; 4495 if (cp->host_status==HS_COMPLETE) 4496 cp->host_status = HS_FAIL; 4497 }; 4498 4499 /* 4500 ** Check the status. 4501 */ 4502 if (cp->host_status == HS_COMPLETE) { 4503 4504 if (cp->s_status == SCSI_STATUS_OK) { 4505 4506 /* 4507 ** All went well. 4508 */ 4509 /* XXX JGibbs - Properly calculate residual */ 4510 4511 tp->bytes += ccb->csio.dxfer_len; 4512 tp->transfers ++; 4513 4514 ccb->ccb_h.status = CAM_REQ_CMP; 4515 } else if ((cp->s_status & SCSI_STATUS_SENSE) != 0) { 4516 4517 /* 4518 * XXX Could be TERMIO too. Should record 4519 * original status. 4520 */ 4521 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 4522 cp->s_status &= ~SCSI_STATUS_SENSE; 4523 if (cp->s_status == SCSI_STATUS_OK) { 4524 ccb->ccb_h.status = 4525 CAM_AUTOSNS_VALID|CAM_SCSI_STATUS_ERROR; 4526 } else { 4527 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 4528 } 4529 } else { 4530 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; 4531 ccb->csio.scsi_status = cp->s_status; 4532 } 4533 4534 4535 } else if (cp->host_status == HS_SEL_TIMEOUT) { 4536 4537 /* 4538 ** Device failed selection 4539 */ 4540 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 4541 4542 } else if (cp->host_status == HS_TIMEOUT) { 4543 4544 /* 4545 ** No response 4546 */ 4547 ccb->ccb_h.status = CAM_CMD_TIMEOUT; 4548 } else if (cp->host_status == HS_STALL) { 4549 ccb->ccb_h.status = CAM_REQUEUE_REQ; 4550 } else { 4551 4552 /* 4553 ** Other protocol messes 4554 */ 4555 PRINT_ADDR(ccb); 4556 printf ("COMMAND FAILED (%x %x) @%p.\n", 4557 cp->host_status, cp->s_status, cp); 4558 4559 ccb->ccb_h.status = CAM_CMD_TIMEOUT; 4560 } 4561 4562 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 4563 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 4564 ccb->ccb_h.status |= CAM_DEV_QFRZN; 4565 } 4566 4567 /* 4568 ** Free this nccb 4569 */ 4570 ncr_free_nccb (np, cp); 4571 4572 /* 4573 ** signal completion to generic driver. 4574 */ 4575 xpt_done (ccb); 4576 } 4577 4578 /*========================================================== 4579 ** 4580 ** 4581 ** Signal all (or one) control block done. 4582 ** 4583 ** 4584 **========================================================== 4585 */ 4586 4587 void 4588 ncr_wakeup (ncb_p np, u_long code) 4589 { 4590 /* 4591 ** Starting at the default nccb and following 4592 ** the links, complete all jobs with a 4593 ** host_status greater than "disconnect". 4594 ** 4595 ** If the "code" parameter is not zero, 4596 ** complete all jobs that are not IDLE. 4597 */ 4598 4599 nccb_p cp = np->link_nccb; 4600 while (cp) { 4601 switch (cp->host_status) { 4602 4603 case HS_IDLE: 4604 break; 4605 4606 case HS_DISCONNECT: 4607 if(DEBUG_FLAGS & DEBUG_TINY) printf ("D"); 4608 /* fall through */ 4609 4610 case HS_BUSY: 4611 case HS_NEGOTIATE: 4612 if (!code) break; 4613 cp->host_status = code; 4614 4615 /* fall through */ 4616 4617 default: 4618 ncr_complete (np, cp); 4619 break; 4620 }; 4621 cp = cp -> link_nccb; 4622 }; 4623 } 4624 4625 static void 4626 ncr_freeze_devq (ncb_p np, struct cam_path *path) 4627 { 4628 nccb_p cp; 4629 int i; 4630 int count; 4631 int firstskip; 4632 /* 4633 ** Starting at the first nccb and following 4634 ** the links, complete all jobs that match 4635 ** the passed in path and are in the start queue. 4636 */ 4637 4638 cp = np->link_nccb; 4639 count = 0; 4640 firstskip = 0; 4641 while (cp) { 4642 switch (cp->host_status) { 4643 4644 case HS_BUSY: 4645 case HS_NEGOTIATE: 4646 if ((cp->phys.header.launch.l_paddr 4647 == NCB_SCRIPT_PHYS (np, select)) 4648 && (xpt_path_comp(path, cp->ccb->ccb_h.path) >= 0)) { 4649 4650 /* Mark for removal from the start queue */ 4651 for (i = 1; i < MAX_START; i++) { 4652 int idx; 4653 4654 idx = np->squeueput - i; 4655 4656 if (idx < 0) 4657 idx = MAX_START + idx; 4658 if (np->squeue[idx] 4659 == CCB_PHYS(cp, phys)) { 4660 np->squeue[idx] = 4661 NCB_SCRIPT_PHYS (np, skip); 4662 if (i > firstskip) 4663 firstskip = i; 4664 break; 4665 } 4666 } 4667 cp->host_status=HS_STALL; 4668 ncr_complete (np, cp); 4669 count++; 4670 } 4671 break; 4672 default: 4673 break; 4674 } 4675 cp = cp->link_nccb; 4676 } 4677 4678 if (count > 0) { 4679 int j; 4680 int bidx; 4681 4682 /* Compress the start queue */ 4683 j = 0; 4684 bidx = np->squeueput; 4685 i = np->squeueput - firstskip; 4686 if (i < 0) 4687 i = MAX_START + i; 4688 for (;;) { 4689 4690 bidx = i - j; 4691 if (bidx < 0) 4692 bidx = MAX_START + bidx; 4693 4694 if (np->squeue[i] == NCB_SCRIPT_PHYS (np, skip)) { 4695 j++; 4696 } else if (j != 0) { 4697 np->squeue[bidx] = np->squeue[i]; 4698 if (np->squeue[bidx] 4699 == NCB_SCRIPT_PHYS(np, idle)) 4700 break; 4701 } 4702 i = (i + 1) % MAX_START; 4703 } 4704 np->squeueput = bidx; 4705 } 4706 } 4707 4708 /*========================================================== 4709 ** 4710 ** 4711 ** Start NCR chip. 4712 ** 4713 ** 4714 **========================================================== 4715 */ 4716 4717 void 4718 ncr_init(ncb_p np, char * msg, u_long code) 4719 { 4720 int i; 4721 4722 /* 4723 ** Reset chip. 4724 */ 4725 4726 OUTB (nc_istat, SRST); 4727 DELAY (1000); 4728 OUTB (nc_istat, 0); 4729 4730 /* 4731 ** Message. 4732 */ 4733 4734 if (msg) printf ("%s: restart (%s).\n", ncr_name (np), msg); 4735 4736 /* 4737 ** Clear Start Queue 4738 */ 4739 4740 for (i=0;i<MAX_START;i++) 4741 np -> squeue [i] = NCB_SCRIPT_PHYS (np, idle); 4742 4743 /* 4744 ** Start at first entry. 4745 */ 4746 4747 np->squeueput = 0; 4748 WRITESCRIPT(startpos[0], NCB_SCRIPTH_PHYS (np, tryloop)); 4749 WRITESCRIPT(start0 [0], SCR_INT ^ IFFALSE (0)); 4750 4751 /* 4752 ** Wakeup all pending jobs. 4753 */ 4754 4755 ncr_wakeup (np, code); 4756 4757 /* 4758 ** Init chip. 4759 */ 4760 4761 OUTB (nc_istat, 0x00 ); /* Remove Reset, abort ... */ 4762 OUTB (nc_scntl0, 0xca ); /* full arb., ena parity, par->ATN */ 4763 OUTB (nc_scntl1, 0x00 ); /* odd parity, and remove CRST!! */ 4764 ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */ 4765 OUTB (nc_scid , RRE|np->myaddr);/* host adapter SCSI address */ 4766 OUTW (nc_respid, 1ul<<np->myaddr);/* id to respond to */ 4767 OUTB (nc_istat , SIGP ); /* Signal Process */ 4768 OUTB (nc_dmode , np->rv_dmode); /* XXX modify burstlen ??? */ 4769 OUTB (nc_dcntl , np->rv_dcntl); 4770 OUTB (nc_ctest3, np->rv_ctest3); 4771 OUTB (nc_ctest5, np->rv_ctest5); 4772 OUTB (nc_ctest4, np->rv_ctest4);/* enable master parity checking */ 4773 OUTB (nc_stest2, np->rv_stest2|EXT); /* Extended Sreq/Sack filtering */ 4774 OUTB (nc_stest3, TE ); /* TolerANT enable */ 4775 OUTB (nc_stime0, 0x0b ); /* HTH = disabled, STO = 0.1 sec. */ 4776 4777 if (bootverbose >= 2) { 4778 printf ("\tACTUAL values:SCNTL3:%02x DMODE:%02x DCNTL:%02x\n", 4779 np->rv_scntl3, np->rv_dmode, np->rv_dcntl); 4780 printf ("\t CTEST3:%02x CTEST4:%02x CTEST5:%02x\n", 4781 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 4782 } 4783 4784 /* 4785 ** Enable GPIO0 pin for writing if LED support. 4786 */ 4787 4788 if (np->features & FE_LED0) { 4789 OUTOFFB (nc_gpcntl, 0x01); 4790 } 4791 4792 /* 4793 ** Fill in target structure. 4794 */ 4795 for (i=0;i<MAX_TARGET;i++) { 4796 tcb_p tp = &np->target[i]; 4797 4798 tp->tinfo.sval = 0; 4799 tp->tinfo.wval = np->rv_scntl3; 4800 4801 tp->tinfo.current.period = 0; 4802 tp->tinfo.current.offset = 0; 4803 tp->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT; 4804 } 4805 4806 /* 4807 ** enable ints 4808 */ 4809 4810 OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST); 4811 OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID); 4812 4813 /* 4814 ** Start script processor. 4815 */ 4816 4817 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, start)); 4818 4819 /* 4820 * Notify the XPT of the event 4821 */ 4822 if (code == HS_RESET) 4823 xpt_async(AC_BUS_RESET, np->path, NULL); 4824 } 4825 4826 static void 4827 ncr_poll(struct cam_sim *sim) 4828 { 4829 ncr_intr(cam_sim_softc(sim)); 4830 } 4831 4832 4833 /*========================================================== 4834 ** 4835 ** Get clock factor and sync divisor for a given 4836 ** synchronous factor period. 4837 ** Returns the clock factor (in sxfer) and scntl3 4838 ** synchronous divisor field. 4839 ** 4840 **========================================================== 4841 */ 4842 4843 static void ncr_getsync(ncb_p np, u_char sfac, u_char *fakp, u_char *scntl3p) 4844 { 4845 u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */ 4846 int div = np->clock_divn; /* Number of divisors supported */ 4847 u_long fak; /* Sync factor in sxfer */ 4848 u_long per; /* Period in tenths of ns */ 4849 u_long kpc; /* (per * clk) */ 4850 4851 /* 4852 ** Compute the synchronous period in tenths of nano-seconds 4853 */ 4854 if (sfac <= 10) per = 250; 4855 else if (sfac == 11) per = 303; 4856 else if (sfac == 12) per = 500; 4857 else per = 40 * sfac; 4858 4859 /* 4860 ** Look for the greatest clock divisor that allows an 4861 ** input speed faster than the period. 4862 */ 4863 kpc = per * clk; 4864 while (--div >= 0) 4865 if (kpc >= (div_10M[div] * 4)) break; 4866 4867 /* 4868 ** Calculate the lowest clock factor that allows an output 4869 ** speed not faster than the period. 4870 */ 4871 fak = (kpc - 1) / div_10M[div] + 1; 4872 4873 #if 0 /* You can #if 1 if you think this optimization is usefull */ 4874 4875 per = (fak * div_10M[div]) / clk; 4876 4877 /* 4878 ** Why not to try the immediate lower divisor and to choose 4879 ** the one that allows the fastest output speed ? 4880 ** We dont want input speed too much greater than output speed. 4881 */ 4882 if (div >= 1 && fak < 6) { 4883 u_long fak2, per2; 4884 fak2 = (kpc - 1) / div_10M[div-1] + 1; 4885 per2 = (fak2 * div_10M[div-1]) / clk; 4886 if (per2 < per && fak2 <= 6) { 4887 fak = fak2; 4888 per = per2; 4889 --div; 4890 } 4891 } 4892 #endif 4893 4894 if (fak < 4) fak = 4; /* Should never happen, too bad ... */ 4895 4896 /* 4897 ** Compute and return sync parameters for the ncr 4898 */ 4899 *fakp = fak - 4; 4900 *scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0); 4901 } 4902 4903 /*========================================================== 4904 ** 4905 ** Switch sync mode for current job and its target 4906 ** 4907 **========================================================== 4908 */ 4909 4910 static void 4911 ncr_setsync(ncb_p np, nccb_p cp, u_char scntl3, u_char sxfer, u_char period) 4912 { 4913 union ccb *ccb; 4914 struct ccb_trans_settings neg; 4915 tcb_p tp; 4916 int div; 4917 u_int target = INB (nc_sdid) & 0x0f; 4918 u_int period_10ns; 4919 4920 assert (cp); 4921 if (!cp) return; 4922 4923 ccb = cp->ccb; 4924 assert (ccb); 4925 if (!ccb) return; 4926 assert (target == ccb->ccb_h.target_id); 4927 4928 tp = &np->target[target]; 4929 4930 if (!scntl3 || !(sxfer & 0x1f)) 4931 scntl3 = np->rv_scntl3; 4932 scntl3 = (scntl3 & 0xf0) | (tp->tinfo.wval & EWS) 4933 | (np->rv_scntl3 & 0x07); 4934 4935 /* 4936 ** Deduce the value of controller sync period from scntl3. 4937 ** period is in tenths of nano-seconds. 4938 */ 4939 4940 div = ((scntl3 >> 4) & 0x7); 4941 if ((sxfer & 0x1f) && div) 4942 period_10ns = 4943 (((sxfer>>5)+4)*div_10M[div-1])/np->clock_khz; 4944 else 4945 period_10ns = 0; 4946 4947 tp->tinfo.goal.period = period; 4948 tp->tinfo.goal.offset = sxfer & 0x1f; 4949 tp->tinfo.current.period = period; 4950 tp->tinfo.current.offset = sxfer & 0x1f; 4951 4952 /* 4953 ** Stop there if sync parameters are unchanged 4954 */ 4955 if (tp->tinfo.sval == sxfer && tp->tinfo.wval == scntl3) return; 4956 tp->tinfo.sval = sxfer; 4957 tp->tinfo.wval = scntl3; 4958 4959 if (sxfer & 0x1f) { 4960 /* 4961 ** Disable extended Sreq/Sack filtering 4962 */ 4963 if (period_10ns <= 2000) OUTOFFB (nc_stest2, EXT); 4964 } 4965 4966 /* 4967 ** Tell the SCSI layer about the 4968 ** new transfer parameters. 4969 */ 4970 neg.sync_period = period; 4971 neg.sync_offset = sxfer & 0x1f; 4972 neg.valid = CCB_TRANS_SYNC_RATE_VALID 4973 | CCB_TRANS_SYNC_OFFSET_VALID; 4974 xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path, 4975 /*priority*/1); 4976 xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg); 4977 4978 /* 4979 ** set actual value and sync_status 4980 */ 4981 OUTB (nc_sxfer, sxfer); 4982 np->sync_st = sxfer; 4983 OUTB (nc_scntl3, scntl3); 4984 np->wide_st = scntl3; 4985 4986 /* 4987 ** patch ALL nccbs of this target. 4988 */ 4989 for (cp = np->link_nccb; cp; cp = cp->link_nccb) { 4990 if (!cp->ccb) continue; 4991 if (cp->ccb->ccb_h.target_id != target) continue; 4992 cp->sync_status = sxfer; 4993 cp->wide_status = scntl3; 4994 }; 4995 } 4996 4997 /*========================================================== 4998 ** 4999 ** Switch wide mode for current job and its target 5000 ** SCSI specs say: a SCSI device that accepts a WDTR 5001 ** message shall reset the synchronous agreement to 5002 ** asynchronous mode. 5003 ** 5004 **========================================================== 5005 */ 5006 5007 static void ncr_setwide (ncb_p np, nccb_p cp, u_char wide, u_char ack) 5008 { 5009 union ccb *ccb; 5010 struct ccb_trans_settings neg; 5011 u_int target = INB (nc_sdid) & 0x0f; 5012 tcb_p tp; 5013 u_char scntl3; 5014 u_char sxfer; 5015 5016 assert (cp); 5017 if (!cp) return; 5018 5019 ccb = cp->ccb; 5020 assert (ccb); 5021 if (!ccb) return; 5022 assert (target == ccb->ccb_h.target_id); 5023 5024 tp = &np->target[target]; 5025 tp->tinfo.current.width = wide; 5026 tp->tinfo.goal.width = wide; 5027 tp->tinfo.current.period = 0; 5028 tp->tinfo.current.offset = 0; 5029 5030 scntl3 = (tp->tinfo.wval & (~EWS)) | (wide ? EWS : 0); 5031 5032 sxfer = ack ? 0 : tp->tinfo.sval; 5033 5034 /* 5035 ** Stop there if sync/wide parameters are unchanged 5036 */ 5037 if (tp->tinfo.sval == sxfer && tp->tinfo.wval == scntl3) return; 5038 tp->tinfo.sval = sxfer; 5039 tp->tinfo.wval = scntl3; 5040 5041 /* Tell the SCSI layer about the new transfer params */ 5042 neg.bus_width = (scntl3 & EWS) ? MSG_EXT_WDTR_BUS_16_BIT 5043 : MSG_EXT_WDTR_BUS_8_BIT; 5044 neg.sync_period = 0; 5045 neg.sync_offset = 0; 5046 neg.valid = CCB_TRANS_BUS_WIDTH_VALID 5047 | CCB_TRANS_SYNC_RATE_VALID 5048 | CCB_TRANS_SYNC_OFFSET_VALID; 5049 xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path, 5050 /*priority*/1); 5051 xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg); 5052 5053 /* 5054 ** set actual value and sync_status 5055 */ 5056 OUTB (nc_sxfer, sxfer); 5057 np->sync_st = sxfer; 5058 OUTB (nc_scntl3, scntl3); 5059 np->wide_st = scntl3; 5060 5061 /* 5062 ** patch ALL nccbs of this target. 5063 */ 5064 for (cp = np->link_nccb; cp; cp = cp->link_nccb) { 5065 if (!cp->ccb) continue; 5066 if (cp->ccb->ccb_h.target_id != target) continue; 5067 cp->sync_status = sxfer; 5068 cp->wide_status = scntl3; 5069 }; 5070 } 5071 5072 /*========================================================== 5073 ** 5074 ** 5075 ** ncr timeout handler. 5076 ** 5077 ** 5078 **========================================================== 5079 ** 5080 ** Misused to keep the driver running when 5081 ** interrupts are not configured correctly. 5082 ** 5083 **---------------------------------------------------------- 5084 */ 5085 5086 static void 5087 ncr_timeout (void *arg) 5088 { 5089 ncb_p np = arg; 5090 time_t thistime = time_second; 5091 ticks_t step = np->ticks; 5092 u_long count = 0; 5093 long signed t; 5094 nccb_p cp; 5095 5096 if (np->lasttime != thistime) { 5097 /* 5098 ** block ncr interrupts 5099 */ 5100 crit_enter(); 5101 np->lasttime = thistime; 5102 5103 /*---------------------------------------------------- 5104 ** 5105 ** handle ncr chip timeouts 5106 ** 5107 ** Assumption: 5108 ** We have a chance to arbitrate for the 5109 ** SCSI bus at least every 10 seconds. 5110 ** 5111 **---------------------------------------------------- 5112 */ 5113 5114 t = thistime - np->heartbeat; 5115 5116 if (t<2) np->latetime=0; else np->latetime++; 5117 5118 if (np->latetime>2) { 5119 /* 5120 ** If there are no requests, the script 5121 ** processor will sleep on SEL_WAIT_RESEL. 5122 ** But we have to check whether it died. 5123 ** Let's try to wake it up. 5124 */ 5125 OUTB (nc_istat, SIGP); 5126 }; 5127 5128 /*---------------------------------------------------- 5129 ** 5130 ** handle nccb timeouts 5131 ** 5132 **---------------------------------------------------- 5133 */ 5134 5135 for (cp=np->link_nccb; cp; cp=cp->link_nccb) { 5136 /* 5137 ** look for timed out nccbs. 5138 */ 5139 if (!cp->host_status) continue; 5140 count++; 5141 if (cp->tlimit > thistime) continue; 5142 5143 /* 5144 ** Disable reselect. 5145 ** Remove it from startqueue. 5146 */ 5147 cp->jump_nccb.l_cmd = (SCR_JUMP); 5148 if (cp->phys.header.launch.l_paddr == 5149 NCB_SCRIPT_PHYS (np, select)) { 5150 printf ("%s: timeout nccb=%p (skip)\n", 5151 ncr_name (np), cp); 5152 cp->phys.header.launch.l_paddr 5153 = NCB_SCRIPT_PHYS (np, skip); 5154 }; 5155 5156 switch (cp->host_status) { 5157 5158 case HS_BUSY: 5159 case HS_NEGOTIATE: 5160 /* fall through */ 5161 case HS_DISCONNECT: 5162 cp->host_status=HS_TIMEOUT; 5163 }; 5164 cp->tag = 0; 5165 5166 /* 5167 ** wakeup this nccb. 5168 */ 5169 ncr_complete (np, cp); 5170 }; 5171 crit_exit(); 5172 } 5173 5174 callout_reset(&np->timeout_ch, step ? step : 1, ncr_timeout, np); 5175 5176 if (INB(nc_istat) & (INTF|SIP|DIP)) { 5177 5178 /* 5179 ** Process pending interrupts. 5180 */ 5181 5182 crit_enter(); 5183 if (DEBUG_FLAGS & DEBUG_TINY) printf ("{"); 5184 ncr_exception (np); 5185 if (DEBUG_FLAGS & DEBUG_TINY) printf ("}"); 5186 crit_exit(); 5187 }; 5188 } 5189 5190 /*========================================================== 5191 ** 5192 ** log message for real hard errors 5193 ** 5194 ** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)." 5195 ** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf." 5196 ** 5197 ** exception register: 5198 ** ds: dstat 5199 ** si: sist 5200 ** 5201 ** SCSI bus lines: 5202 ** so: control lines as driver by NCR. 5203 ** si: control lines as seen by NCR. 5204 ** sd: scsi data lines as seen by NCR. 5205 ** 5206 ** wide/fastmode: 5207 ** sxfer: (see the manual) 5208 ** scntl3: (see the manual) 5209 ** 5210 ** current script command: 5211 ** dsp: script adress (relative to start of script). 5212 ** dbc: first word of script command. 5213 ** 5214 ** First 16 register of the chip: 5215 ** r0..rf 5216 ** 5217 **========================================================== 5218 */ 5219 5220 static void ncr_log_hard_error(ncb_p np, u_short sist, u_char dstat) 5221 { 5222 u_int32_t dsp; 5223 int script_ofs; 5224 int script_size; 5225 char *script_name; 5226 u_char *script_base; 5227 int i; 5228 5229 dsp = INL (nc_dsp); 5230 5231 if (np->p_script < dsp && 5232 dsp <= np->p_script + sizeof(struct script)) { 5233 script_ofs = dsp - np->p_script; 5234 script_size = sizeof(struct script); 5235 script_base = (u_char *) np->script; 5236 script_name = "script"; 5237 } 5238 else if (np->p_scripth < dsp && 5239 dsp <= np->p_scripth + sizeof(struct scripth)) { 5240 script_ofs = dsp - np->p_scripth; 5241 script_size = sizeof(struct scripth); 5242 script_base = (u_char *) np->scripth; 5243 script_name = "scripth"; 5244 } else { 5245 script_ofs = dsp; 5246 script_size = 0; 5247 script_base = 0; 5248 script_name = "mem"; 5249 } 5250 5251 printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", 5252 ncr_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist, 5253 (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), (unsigned)INB (nc_sbdl), 5254 (unsigned)INB (nc_sxfer),(unsigned)INB (nc_scntl3), script_name, script_ofs, 5255 (unsigned)INL (nc_dbc)); 5256 5257 if (((script_ofs & 3) == 0) && 5258 (unsigned)script_ofs < script_size) { 5259 printf ("%s: script cmd = %08x\n", ncr_name(np), 5260 (int)READSCRIPT_OFF(script_base, script_ofs)); 5261 } 5262 5263 printf ("%s: regdump:", ncr_name(np)); 5264 for (i=0; i<16;i++) 5265 printf (" %02x", (unsigned)INB_OFF(i)); 5266 printf (".\n"); 5267 } 5268 5269 /*========================================================== 5270 ** 5271 ** 5272 ** ncr chip exception handler. 5273 ** 5274 ** 5275 **========================================================== 5276 */ 5277 5278 void ncr_exception (ncb_p np) 5279 { 5280 u_char istat, dstat; 5281 u_short sist; 5282 5283 /* 5284 ** interrupt on the fly ? 5285 */ 5286 while ((istat = INB (nc_istat)) & INTF) { 5287 if (DEBUG_FLAGS & DEBUG_TINY) printf ("F "); 5288 OUTB (nc_istat, INTF); 5289 np->profile.num_fly++; 5290 ncr_wakeup (np, 0); 5291 }; 5292 if (!(istat & (SIP|DIP))) { 5293 return; 5294 } 5295 5296 /* 5297 ** Steinbach's Guideline for Systems Programming: 5298 ** Never test for an error condition you don't know how to handle. 5299 */ 5300 5301 sist = (istat & SIP) ? INW (nc_sist) : 0; 5302 dstat = (istat & DIP) ? INB (nc_dstat) : 0; 5303 np->profile.num_int++; 5304 5305 if (DEBUG_FLAGS & DEBUG_TINY) 5306 printf ("<%d|%x:%x|%x:%x>", 5307 INB(nc_scr0), 5308 dstat,sist, 5309 (unsigned)INL(nc_dsp), 5310 (unsigned)INL(nc_dbc)); 5311 if ((dstat==DFE) && (sist==PAR)) return; 5312 5313 /*========================================================== 5314 ** 5315 ** First the normal cases. 5316 ** 5317 **========================================================== 5318 */ 5319 /*------------------------------------------- 5320 ** SCSI reset 5321 **------------------------------------------- 5322 */ 5323 5324 if (sist & RST) { 5325 ncr_init (np, bootverbose ? "scsi reset" : NULL, HS_RESET); 5326 return; 5327 }; 5328 5329 /*------------------------------------------- 5330 ** selection timeout 5331 ** 5332 ** IID excluded from dstat mask! 5333 ** (chip bug) 5334 **------------------------------------------- 5335 */ 5336 5337 if ((sist & STO) && 5338 !(sist & (GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5339 !(dstat & (MDPE|BF|ABRT|SIR))) { 5340 ncr_int_sto (np); 5341 return; 5342 }; 5343 5344 /*------------------------------------------- 5345 ** Phase mismatch. 5346 **------------------------------------------- 5347 */ 5348 5349 if ((sist & MA) && 5350 !(sist & (STO|GEN|HTH|SGE|UDC|RST|PAR)) && 5351 !(dstat & (MDPE|BF|ABRT|SIR|IID))) { 5352 ncr_int_ma (np, dstat); 5353 return; 5354 }; 5355 5356 /*---------------------------------------- 5357 ** move command with length 0 5358 **---------------------------------------- 5359 */ 5360 5361 if ((dstat & IID) && 5362 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5363 !(dstat & (MDPE|BF|ABRT|SIR)) && 5364 ((INL(nc_dbc) & 0xf8000000) == SCR_MOVE_TBL)) { 5365 /* 5366 ** Target wants more data than available. 5367 ** The "no_data" script will do it. 5368 */ 5369 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, no_data)); 5370 return; 5371 }; 5372 5373 /*------------------------------------------- 5374 ** Programmed interrupt 5375 **------------------------------------------- 5376 */ 5377 5378 if ((dstat & SIR) && 5379 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5380 !(dstat & (MDPE|BF|ABRT|IID)) && 5381 (INB(nc_dsps) <= SIR_MAX)) { 5382 ncr_int_sir (np); 5383 return; 5384 }; 5385 5386 /*======================================== 5387 ** log message for real hard errors 5388 **======================================== 5389 */ 5390 5391 ncr_log_hard_error(np, sist, dstat); 5392 5393 /*======================================== 5394 ** do the register dump 5395 **======================================== 5396 */ 5397 5398 if (time_second - np->regtime > 10) { 5399 int i; 5400 np->regtime = time_second; 5401 for (i=0; i<sizeof(np->regdump); i++) 5402 ((volatile char*)&np->regdump)[i] = INB_OFF(i); 5403 np->regdump.nc_dstat = dstat; 5404 np->regdump.nc_sist = sist; 5405 }; 5406 5407 5408 /*---------------------------------------- 5409 ** clean up the dma fifo 5410 **---------------------------------------- 5411 */ 5412 5413 if ( (INB(nc_sstat0) & (ILF|ORF|OLF) ) || 5414 (INB(nc_sstat1) & (FF3210) ) || 5415 (INB(nc_sstat2) & (ILF1|ORF1|OLF1)) || /* wide .. */ 5416 !(dstat & DFE)) { 5417 printf ("%s: have to clear fifos.\n", ncr_name (np)); 5418 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 5419 OUTB (nc_ctest3, np->rv_ctest3 | CLF); 5420 /* clear dma fifo */ 5421 } 5422 5423 /*---------------------------------------- 5424 ** handshake timeout 5425 **---------------------------------------- 5426 */ 5427 5428 if (sist & HTH) { 5429 printf ("%s: handshake timeout\n", ncr_name(np)); 5430 OUTB (nc_scntl1, CRST); 5431 DELAY (1000); 5432 OUTB (nc_scntl1, 0x00); 5433 OUTB (nc_scr0, HS_FAIL); 5434 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, cleanup)); 5435 return; 5436 } 5437 5438 /*---------------------------------------- 5439 ** unexpected disconnect 5440 **---------------------------------------- 5441 */ 5442 5443 if ((sist & UDC) && 5444 !(sist & (STO|GEN|HTH|MA|SGE|RST|PAR)) && 5445 !(dstat & (MDPE|BF|ABRT|SIR|IID))) { 5446 OUTB (nc_scr0, HS_UNEXPECTED); 5447 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, cleanup)); 5448 return; 5449 }; 5450 5451 /*---------------------------------------- 5452 ** cannot disconnect 5453 **---------------------------------------- 5454 */ 5455 5456 if ((dstat & IID) && 5457 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5458 !(dstat & (MDPE|BF|ABRT|SIR)) && 5459 ((INL(nc_dbc) & 0xf8000000) == SCR_WAIT_DISC)) { 5460 /* 5461 ** Unexpected data cycle while waiting for disconnect. 5462 */ 5463 if (INB(nc_sstat2) & LDSC) { 5464 /* 5465 ** It's an early reconnect. 5466 ** Let's continue ... 5467 */ 5468 OUTB (nc_dcntl, np->rv_dcntl | STD); 5469 /* 5470 ** info message 5471 */ 5472 printf ("%s: INFO: LDSC while IID.\n", 5473 ncr_name (np)); 5474 return; 5475 }; 5476 printf ("%s: target %d doesn't release the bus.\n", 5477 ncr_name (np), INB (nc_sdid)&0x0f); 5478 /* 5479 ** return without restarting the NCR. 5480 ** timeout will do the real work. 5481 */ 5482 return; 5483 }; 5484 5485 /*---------------------------------------- 5486 ** single step 5487 **---------------------------------------- 5488 */ 5489 5490 if ((dstat & SSI) && 5491 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5492 !(dstat & (MDPE|BF|ABRT|SIR|IID))) { 5493 OUTB (nc_dcntl, np->rv_dcntl | STD); 5494 return; 5495 }; 5496 5497 /* 5498 ** @RECOVER@ HTH, SGE, ABRT. 5499 ** 5500 ** We should try to recover from these interrupts. 5501 ** They may occur if there are problems with synch transfers, or 5502 ** if targets are switched on or off while the driver is running. 5503 */ 5504 5505 if (sist & SGE) { 5506 /* clear scsi offsets */ 5507 OUTB (nc_ctest3, np->rv_ctest3 | CLF); 5508 } 5509 5510 /* 5511 ** Freeze controller to be able to read the messages. 5512 */ 5513 5514 if (DEBUG_FLAGS & DEBUG_FREEZE) { 5515 int i; 5516 unsigned char val; 5517 for (i=0; i<0x60; i++) { 5518 switch (i%16) { 5519 5520 case 0: 5521 printf ("%s: reg[%d0]: ", 5522 ncr_name(np),i/16); 5523 break; 5524 case 4: 5525 case 8: 5526 case 12: 5527 printf (" "); 5528 break; 5529 }; 5530 val = bus_space_read_1(np->bst, np->bsh, i); 5531 printf (" %x%x", val/16, val%16); 5532 if (i%16==15) printf (".\n"); 5533 }; 5534 5535 callout_stop(&np->timeout_ch); 5536 5537 printf ("%s: halted!\n", ncr_name(np)); 5538 /* 5539 ** don't restart controller ... 5540 */ 5541 OUTB (nc_istat, SRST); 5542 return; 5543 }; 5544 5545 #ifdef NCR_FREEZE 5546 /* 5547 ** Freeze system to be able to read the messages. 5548 */ 5549 printf ("ncr: fatal error: system halted - press reset to reboot ..."); 5550 crit_enter(); 5551 for (;;); 5552 #endif 5553 5554 /* 5555 ** sorry, have to kill ALL jobs ... 5556 */ 5557 5558 ncr_init (np, "fatal error", HS_FAIL); 5559 } 5560 5561 /*========================================================== 5562 ** 5563 ** ncr chip exception handler for selection timeout 5564 ** 5565 **========================================================== 5566 ** 5567 ** There seems to be a bug in the 53c810. 5568 ** Although a STO-Interrupt is pending, 5569 ** it continues executing script commands. 5570 ** But it will fail and interrupt (IID) on 5571 ** the next instruction where it's looking 5572 ** for a valid phase. 5573 ** 5574 **---------------------------------------------------------- 5575 */ 5576 5577 void ncr_int_sto (ncb_p np) 5578 { 5579 u_long dsa, scratcha, diff; 5580 nccb_p cp; 5581 if (DEBUG_FLAGS & DEBUG_TINY) printf ("T"); 5582 5583 /* 5584 ** look for nccb and set the status. 5585 */ 5586 5587 dsa = INL (nc_dsa); 5588 cp = np->link_nccb; 5589 while (cp && (CCB_PHYS (cp, phys) != dsa)) 5590 cp = cp->link_nccb; 5591 5592 if (cp) { 5593 cp-> host_status = HS_SEL_TIMEOUT; 5594 ncr_complete (np, cp); 5595 }; 5596 5597 /* 5598 ** repair start queue 5599 */ 5600 5601 scratcha = INL (nc_scratcha); 5602 diff = scratcha - NCB_SCRIPTH_PHYS (np, tryloop); 5603 5604 /* assert ((diff <= MAX_START * 20) && !(diff % 20));*/ 5605 5606 if ((diff <= MAX_START * 20) && !(diff % 20)) { 5607 WRITESCRIPT(startpos[0], scratcha); 5608 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, start)); 5609 return; 5610 }; 5611 ncr_init (np, "selection timeout", HS_FAIL); 5612 } 5613 5614 /*========================================================== 5615 ** 5616 ** 5617 ** ncr chip exception handler for phase errors. 5618 ** 5619 ** 5620 **========================================================== 5621 ** 5622 ** We have to construct a new transfer descriptor, 5623 ** to transfer the rest of the current block. 5624 ** 5625 **---------------------------------------------------------- 5626 */ 5627 5628 static void ncr_int_ma (ncb_p np, u_char dstat) 5629 { 5630 u_int32_t dbc; 5631 u_int32_t rest; 5632 u_int32_t dsa; 5633 u_int32_t dsp; 5634 u_int32_t nxtdsp; 5635 volatile void *vdsp_base; 5636 size_t vdsp_off; 5637 u_int32_t oadr, olen; 5638 u_int32_t *tblp, *newcmd; 5639 u_char cmd, sbcl, ss0, ss2, ctest5; 5640 u_short delta; 5641 nccb_p cp; 5642 5643 dsp = INL (nc_dsp); 5644 dsa = INL (nc_dsa); 5645 dbc = INL (nc_dbc); 5646 ss0 = INB (nc_sstat0); 5647 ss2 = INB (nc_sstat2); 5648 sbcl= INB (nc_sbcl); 5649 5650 cmd = dbc >> 24; 5651 rest= dbc & 0xffffff; 5652 5653 ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0; 5654 if (ctest5 & DFS) 5655 delta=(((ctest5<<8) | (INB (nc_dfifo) & 0xff)) - rest) & 0x3ff; 5656 else 5657 delta=(INB (nc_dfifo) - rest) & 0x7f; 5658 5659 5660 /* 5661 ** The data in the dma fifo has not been transfered to 5662 ** the target -> add the amount to the rest 5663 ** and clear the data. 5664 ** Check the sstat2 register in case of wide transfer. 5665 */ 5666 5667 if (!(dstat & DFE)) rest += delta; 5668 if (ss0 & OLF) rest++; 5669 if (ss0 & ORF) rest++; 5670 if (INB(nc_scntl3) & EWS) { 5671 if (ss2 & OLF1) rest++; 5672 if (ss2 & ORF1) rest++; 5673 }; 5674 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ 5675 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 5676 5677 /* 5678 ** locate matching cp 5679 */ 5680 cp = np->link_nccb; 5681 while (cp && (CCB_PHYS (cp, phys) != dsa)) 5682 cp = cp->link_nccb; 5683 5684 if (!cp) { 5685 printf ("%s: SCSI phase error fixup: CCB already dequeued (%p)\n", 5686 ncr_name (np), (void *) np->header.cp); 5687 return; 5688 } 5689 if (cp != np->header.cp) { 5690 printf ("%s: SCSI phase error fixup: CCB address mismatch " 5691 "(%p != %p) np->nccb = %p\n", 5692 ncr_name (np), (void *)cp, (void *)np->header.cp, 5693 (void *)np->link_nccb); 5694 /* return;*/ 5695 } 5696 5697 /* 5698 ** find the interrupted script command, 5699 ** and the address at which to continue. 5700 */ 5701 5702 if (dsp == vtophys (&cp->patch[2])) { 5703 vdsp_base = cp; 5704 vdsp_off = offsetof(struct nccb, patch[0]); 5705 nxtdsp = READSCRIPT_OFF(vdsp_base, vdsp_off + 3*4); 5706 } else if (dsp == vtophys (&cp->patch[6])) { 5707 vdsp_base = cp; 5708 vdsp_off = offsetof(struct nccb, patch[4]); 5709 nxtdsp = READSCRIPT_OFF(vdsp_base, vdsp_off + 3*4); 5710 } else if (dsp > np->p_script && 5711 dsp <= np->p_script + sizeof(struct script)) { 5712 vdsp_base = np->script; 5713 vdsp_off = dsp - np->p_script - 8; 5714 nxtdsp = dsp; 5715 } else { 5716 vdsp_base = np->scripth; 5717 vdsp_off = dsp - np->p_scripth - 8; 5718 nxtdsp = dsp; 5719 }; 5720 5721 /* 5722 ** log the information 5723 */ 5724 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) { 5725 printf ("P%x%x ",cmd&7, sbcl&7); 5726 printf ("RL=%d D=%d SS0=%x ", 5727 (unsigned) rest, (unsigned) delta, ss0); 5728 }; 5729 if (DEBUG_FLAGS & DEBUG_PHASE) { 5730 printf ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", 5731 cp, np->header.cp, 5732 dsp, 5733 nxtdsp, (volatile char*)vdsp_base+vdsp_off, cmd); 5734 }; 5735 5736 /* 5737 ** get old startaddress and old length. 5738 */ 5739 5740 oadr = READSCRIPT_OFF(vdsp_base, vdsp_off + 1*4); 5741 5742 if (cmd & 0x10) { /* Table indirect */ 5743 tblp = (u_int32_t *) ((char*) &cp->phys + oadr); 5744 olen = tblp[0]; 5745 oadr = tblp[1]; 5746 } else { 5747 tblp = (u_int32_t *) 0; 5748 olen = READSCRIPT_OFF(vdsp_base, vdsp_off) & 0xffffff; 5749 }; 5750 5751 if (DEBUG_FLAGS & DEBUG_PHASE) { 5752 printf ("OCMD=%x\nTBLP=%p OLEN=%lx OADR=%lx\n", 5753 (unsigned) (READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24), 5754 (void *) tblp, 5755 (u_long) olen, 5756 (u_long) oadr); 5757 }; 5758 5759 /* 5760 ** if old phase not dataphase, leave here. 5761 */ 5762 5763 if (cmd != (READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24)) { 5764 PRINT_ADDR(cp->ccb); 5765 printf ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n", 5766 (unsigned)cmd, 5767 (unsigned)READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24); 5768 5769 return; 5770 } 5771 if (cmd & 0x06) { 5772 PRINT_ADDR(cp->ccb); 5773 printf ("phase change %x-%x %d@%08x resid=%d.\n", 5774 cmd&7, sbcl&7, (unsigned)olen, 5775 (unsigned)oadr, (unsigned)rest); 5776 5777 OUTB (nc_dcntl, np->rv_dcntl | STD); 5778 return; 5779 }; 5780 5781 /* 5782 ** choose the correct patch area. 5783 ** if savep points to one, choose the other. 5784 */ 5785 5786 newcmd = cp->patch; 5787 if (cp->phys.header.savep == vtophys (newcmd)) newcmd+=4; 5788 5789 /* 5790 ** fillin the commands 5791 */ 5792 5793 newcmd[0] = ((cmd & 0x0f) << 24) | rest; 5794 newcmd[1] = oadr + olen - rest; 5795 newcmd[2] = SCR_JUMP; 5796 newcmd[3] = nxtdsp; 5797 5798 if (DEBUG_FLAGS & DEBUG_PHASE) { 5799 PRINT_ADDR(cp->ccb); 5800 printf ("newcmd[%d] %x %x %x %x.\n", 5801 (int)(newcmd - cp->patch), 5802 (unsigned)newcmd[0], 5803 (unsigned)newcmd[1], 5804 (unsigned)newcmd[2], 5805 (unsigned)newcmd[3]); 5806 } 5807 /* 5808 ** fake the return address (to the patch). 5809 ** and restart script processor at dispatcher. 5810 */ 5811 np->profile.num_break++; 5812 OUTL (nc_temp, vtophys (newcmd)); 5813 if ((cmd & 7) == 0) 5814 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, dispatch)); 5815 else 5816 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, checkatn)); 5817 } 5818 5819 /*========================================================== 5820 ** 5821 ** 5822 ** ncr chip exception handler for programmed interrupts. 5823 ** 5824 ** 5825 **========================================================== 5826 */ 5827 5828 static int ncr_show_msg (u_char * msg) 5829 { 5830 u_char i; 5831 printf ("%x",*msg); 5832 if (*msg==MSG_EXTENDED) { 5833 for (i=1;i<8;i++) { 5834 if (i-1>msg[1]) break; 5835 printf ("-%x",msg[i]); 5836 }; 5837 return (i+1); 5838 } else if ((*msg & 0xf0) == 0x20) { 5839 printf ("-%x",msg[1]); 5840 return (2); 5841 }; 5842 return (1); 5843 } 5844 5845 void ncr_int_sir (ncb_p np) 5846 { 5847 u_char scntl3; 5848 u_char chg, ofs, per, fak, wide; 5849 u_char num = INB (nc_dsps); 5850 nccb_p cp=0; 5851 u_long dsa; 5852 u_int target = INB (nc_sdid) & 0x0f; 5853 tcb_p tp = &np->target[target]; 5854 int i; 5855 if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num); 5856 5857 switch (num) { 5858 case SIR_SENSE_RESTART: 5859 case SIR_STALL_RESTART: 5860 break; 5861 5862 default: 5863 /* 5864 ** lookup the nccb 5865 */ 5866 dsa = INL (nc_dsa); 5867 cp = np->link_nccb; 5868 while (cp && (CCB_PHYS (cp, phys) != dsa)) 5869 cp = cp->link_nccb; 5870 5871 assert (cp); 5872 if (!cp) 5873 goto out; 5874 assert (cp == np->header.cp); 5875 if (cp != np->header.cp) 5876 goto out; 5877 } 5878 5879 switch (num) { 5880 5881 /*-------------------------------------------------------------------- 5882 ** 5883 ** Processing of interrupted getcc selects 5884 ** 5885 **-------------------------------------------------------------------- 5886 */ 5887 5888 case SIR_SENSE_RESTART: 5889 /*------------------------------------------ 5890 ** Script processor is idle. 5891 ** Look for interrupted "check cond" 5892 **------------------------------------------ 5893 */ 5894 5895 if (DEBUG_FLAGS & DEBUG_RESTART) 5896 printf ("%s: int#%d",ncr_name (np),num); 5897 cp = (nccb_p) 0; 5898 for (i=0; i<MAX_TARGET; i++) { 5899 if (DEBUG_FLAGS & DEBUG_RESTART) printf (" t%d", i); 5900 tp = &np->target[i]; 5901 if (DEBUG_FLAGS & DEBUG_RESTART) printf ("+"); 5902 cp = tp->hold_cp; 5903 if (!cp) continue; 5904 if (DEBUG_FLAGS & DEBUG_RESTART) printf ("+"); 5905 if ((cp->host_status==HS_BUSY) && 5906 (cp->s_status==SCSI_STATUS_CHECK_COND)) 5907 break; 5908 if (DEBUG_FLAGS & DEBUG_RESTART) printf ("- (remove)"); 5909 tp->hold_cp = cp = (nccb_p) 0; 5910 }; 5911 5912 if (cp) { 5913 if (DEBUG_FLAGS & DEBUG_RESTART) 5914 printf ("+ restart job ..\n"); 5915 OUTL (nc_dsa, CCB_PHYS (cp, phys)); 5916 OUTL (nc_dsp, NCB_SCRIPTH_PHYS (np, getcc)); 5917 return; 5918 }; 5919 5920 /* 5921 ** no job, resume normal processing 5922 */ 5923 if (DEBUG_FLAGS & DEBUG_RESTART) printf (" -- remove trap\n"); 5924 WRITESCRIPT(start0[0], SCR_INT ^ IFFALSE (0)); 5925 break; 5926 5927 case SIR_SENSE_FAILED: 5928 /*------------------------------------------- 5929 ** While trying to select for 5930 ** getting the condition code, 5931 ** a target reselected us. 5932 **------------------------------------------- 5933 */ 5934 if (DEBUG_FLAGS & DEBUG_RESTART) { 5935 PRINT_ADDR(cp->ccb); 5936 printf ("in getcc reselect by t%d.\n", 5937 INB(nc_ssid) & 0x0f); 5938 } 5939 5940 /* 5941 ** Mark this job 5942 */ 5943 cp->host_status = HS_BUSY; 5944 cp->s_status = SCSI_STATUS_CHECK_COND; 5945 np->target[cp->ccb->ccb_h.target_id].hold_cp = cp; 5946 5947 /* 5948 ** And patch code to restart it. 5949 */ 5950 WRITESCRIPT(start0[0], SCR_INT); 5951 break; 5952 5953 /*----------------------------------------------------------------------------- 5954 ** 5955 ** Was Sie schon immer ueber transfermode negotiation wissen wollten ... 5956 ** 5957 ** We try to negotiate sync and wide transfer only after 5958 ** a successfull inquire command. We look at byte 7 of the 5959 ** inquire data to determine the capabilities if the target. 5960 ** 5961 ** When we try to negotiate, we append the negotiation message 5962 ** to the identify and (maybe) simple tag message. 5963 ** The host status field is set to HS_NEGOTIATE to mark this 5964 ** situation. 5965 ** 5966 ** If the target doesn't answer this message immidiately 5967 ** (as required by the standard), the SIR_NEGO_FAIL interrupt 5968 ** will be raised eventually. 5969 ** The handler removes the HS_NEGOTIATE status, and sets the 5970 ** negotiated value to the default (async / nowide). 5971 ** 5972 ** If we receive a matching answer immediately, we check it 5973 ** for validity, and set the values. 5974 ** 5975 ** If we receive a Reject message immediately, we assume the 5976 ** negotiation has failed, and fall back to standard values. 5977 ** 5978 ** If we receive a negotiation message while not in HS_NEGOTIATE 5979 ** state, it's a target initiated negotiation. We prepare a 5980 ** (hopefully) valid answer, set our parameters, and send back 5981 ** this answer to the target. 5982 ** 5983 ** If the target doesn't fetch the answer (no message out phase), 5984 ** we assume the negotiation has failed, and fall back to default 5985 ** settings. 5986 ** 5987 ** When we set the values, we adjust them in all nccbs belonging 5988 ** to this target, in the controller's register, and in the "phys" 5989 ** field of the controller's struct ncb. 5990 ** 5991 ** Possible cases: hs sir msg_in value send goto 5992 ** We try try to negotiate: 5993 ** -> target doesnt't msgin NEG FAIL noop defa. - dispatch 5994 ** -> target rejected our msg NEG FAIL reject defa. - dispatch 5995 ** -> target answered (ok) NEG SYNC sdtr set - clrack 5996 ** -> target answered (!ok) NEG SYNC sdtr defa. REJ--->msg_bad 5997 ** -> target answered (ok) NEG WIDE wdtr set - clrack 5998 ** -> target answered (!ok) NEG WIDE wdtr defa. REJ--->msg_bad 5999 ** -> any other msgin NEG FAIL noop defa. - dispatch 6000 ** 6001 ** Target tries to negotiate: 6002 ** -> incoming message --- SYNC sdtr set SDTR - 6003 ** -> incoming message --- WIDE wdtr set WDTR - 6004 ** We sent our answer: 6005 ** -> target doesn't msgout --- PROTO ? defa. - dispatch 6006 ** 6007 **----------------------------------------------------------------------------- 6008 */ 6009 6010 case SIR_NEGO_FAILED: 6011 /*------------------------------------------------------- 6012 ** 6013 ** Negotiation failed. 6014 ** Target doesn't send an answer message, 6015 ** or target rejected our message. 6016 ** 6017 ** Remove negotiation request. 6018 ** 6019 **------------------------------------------------------- 6020 */ 6021 OUTB (HS_PRT, HS_BUSY); 6022 6023 /* fall through */ 6024 6025 case SIR_NEGO_PROTO: 6026 /*------------------------------------------------------- 6027 ** 6028 ** Negotiation failed. 6029 ** Target doesn't fetch the answer message. 6030 ** 6031 **------------------------------------------------------- 6032 */ 6033 6034 if (DEBUG_FLAGS & DEBUG_NEGO) { 6035 PRINT_ADDR(cp->ccb); 6036 printf ("negotiation failed sir=%x status=%x.\n", 6037 num, cp->nego_status); 6038 }; 6039 6040 /* 6041 ** any error in negotiation: 6042 ** fall back to default mode. 6043 */ 6044 switch (cp->nego_status) { 6045 6046 case NS_SYNC: 6047 ncr_setsync (np, cp, 0, 0xe0, 0); 6048 break; 6049 6050 case NS_WIDE: 6051 ncr_setwide (np, cp, 0, 0); 6052 break; 6053 6054 }; 6055 np->msgin [0] = MSG_NOOP; 6056 np->msgout[0] = MSG_NOOP; 6057 cp->nego_status = 0; 6058 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, dispatch)); 6059 break; 6060 6061 case SIR_NEGO_SYNC: 6062 /* 6063 ** Synchronous request message received. 6064 */ 6065 6066 if (DEBUG_FLAGS & DEBUG_NEGO) { 6067 PRINT_ADDR(cp->ccb); 6068 printf ("sync msgin: "); 6069 (void) ncr_show_msg (np->msgin); 6070 printf (".\n"); 6071 }; 6072 6073 /* 6074 ** get requested values. 6075 */ 6076 6077 chg = 0; 6078 per = np->msgin[3]; 6079 ofs = np->msgin[4]; 6080 if (ofs==0) per=255; 6081 6082 /* 6083 ** check values against driver limits. 6084 */ 6085 if (per < np->minsync) 6086 {chg = 1; per = np->minsync;} 6087 if (per < tp->tinfo.user.period) 6088 {chg = 1; per = tp->tinfo.user.period;} 6089 if (ofs > tp->tinfo.user.offset) 6090 {chg = 1; ofs = tp->tinfo.user.offset;} 6091 6092 /* 6093 ** Check against controller limits. 6094 */ 6095 6096 fak = 7; 6097 scntl3 = 0; 6098 if (ofs != 0) { 6099 ncr_getsync(np, per, &fak, &scntl3); 6100 if (fak > 7) { 6101 chg = 1; 6102 ofs = 0; 6103 } 6104 } 6105 if (ofs == 0) { 6106 fak = 7; 6107 per = 0; 6108 scntl3 = 0; 6109 } 6110 6111 if (DEBUG_FLAGS & DEBUG_NEGO) { 6112 PRINT_ADDR(cp->ccb); 6113 printf ("sync: per=%d scntl3=0x%x ofs=%d fak=%d chg=%d.\n", 6114 per, scntl3, ofs, fak, chg); 6115 } 6116 6117 if (INB (HS_PRT) == HS_NEGOTIATE) { 6118 OUTB (HS_PRT, HS_BUSY); 6119 switch (cp->nego_status) { 6120 6121 case NS_SYNC: 6122 /* 6123 ** This was an answer message 6124 */ 6125 if (chg) { 6126 /* 6127 ** Answer wasn't acceptable. 6128 */ 6129 ncr_setsync (np, cp, 0, 0xe0, 0); 6130 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad)); 6131 } else { 6132 /* 6133 ** Answer is ok. 6134 */ 6135 ncr_setsync (np,cp,scntl3,(fak<<5)|ofs, per); 6136 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, clrack)); 6137 }; 6138 return; 6139 6140 case NS_WIDE: 6141 ncr_setwide (np, cp, 0, 0); 6142 break; 6143 }; 6144 }; 6145 6146 /* 6147 ** It was a request. Set value and 6148 ** prepare an answer message 6149 */ 6150 6151 ncr_setsync (np, cp, scntl3, (fak<<5)|ofs, per); 6152 6153 np->msgout[0] = MSG_EXTENDED; 6154 np->msgout[1] = 3; 6155 np->msgout[2] = MSG_EXT_SDTR; 6156 np->msgout[3] = per; 6157 np->msgout[4] = ofs; 6158 6159 cp->nego_status = NS_SYNC; 6160 6161 if (DEBUG_FLAGS & DEBUG_NEGO) { 6162 PRINT_ADDR(cp->ccb); 6163 printf ("sync msgout: "); 6164 (void) ncr_show_msg (np->msgout); 6165 printf (".\n"); 6166 } 6167 6168 if (!ofs) { 6169 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad)); 6170 return; 6171 } 6172 np->msgin [0] = MSG_NOOP; 6173 6174 break; 6175 6176 case SIR_NEGO_WIDE: 6177 /* 6178 ** Wide request message received. 6179 */ 6180 if (DEBUG_FLAGS & DEBUG_NEGO) { 6181 PRINT_ADDR(cp->ccb); 6182 printf ("wide msgin: "); 6183 (void) ncr_show_msg (np->msgin); 6184 printf (".\n"); 6185 }; 6186 6187 /* 6188 ** get requested values. 6189 */ 6190 6191 chg = 0; 6192 wide = np->msgin[3]; 6193 6194 /* 6195 ** check values against driver limits. 6196 */ 6197 6198 if (wide > tp->tinfo.user.width) 6199 {chg = 1; wide = tp->tinfo.user.width;} 6200 6201 if (DEBUG_FLAGS & DEBUG_NEGO) { 6202 PRINT_ADDR(cp->ccb); 6203 printf ("wide: wide=%d chg=%d.\n", wide, chg); 6204 } 6205 6206 if (INB (HS_PRT) == HS_NEGOTIATE) { 6207 OUTB (HS_PRT, HS_BUSY); 6208 switch (cp->nego_status) { 6209 6210 case NS_WIDE: 6211 /* 6212 ** This was an answer message 6213 */ 6214 if (chg) { 6215 /* 6216 ** Answer wasn't acceptable. 6217 */ 6218 ncr_setwide (np, cp, 0, 1); 6219 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad)); 6220 } else { 6221 /* 6222 ** Answer is ok. 6223 */ 6224 ncr_setwide (np, cp, wide, 1); 6225 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, clrack)); 6226 }; 6227 return; 6228 6229 case NS_SYNC: 6230 ncr_setsync (np, cp, 0, 0xe0, 0); 6231 break; 6232 }; 6233 }; 6234 6235 /* 6236 ** It was a request, set value and 6237 ** prepare an answer message 6238 */ 6239 6240 ncr_setwide (np, cp, wide, 1); 6241 6242 np->msgout[0] = MSG_EXTENDED; 6243 np->msgout[1] = 2; 6244 np->msgout[2] = MSG_EXT_WDTR; 6245 np->msgout[3] = wide; 6246 6247 np->msgin [0] = MSG_NOOP; 6248 6249 cp->nego_status = NS_WIDE; 6250 6251 if (DEBUG_FLAGS & DEBUG_NEGO) { 6252 PRINT_ADDR(cp->ccb); 6253 printf ("wide msgout: "); 6254 (void) ncr_show_msg (np->msgout); 6255 printf (".\n"); 6256 } 6257 break; 6258 6259 /*-------------------------------------------------------------------- 6260 ** 6261 ** Processing of special messages 6262 ** 6263 **-------------------------------------------------------------------- 6264 */ 6265 6266 case SIR_REJECT_RECEIVED: 6267 /*----------------------------------------------- 6268 ** 6269 ** We received a MSG_MESSAGE_REJECT message. 6270 ** 6271 **----------------------------------------------- 6272 */ 6273 6274 PRINT_ADDR(cp->ccb); 6275 printf ("MSG_MESSAGE_REJECT received (%x:%x).\n", 6276 (unsigned)np->lastmsg, np->msgout[0]); 6277 break; 6278 6279 case SIR_REJECT_SENT: 6280 /*----------------------------------------------- 6281 ** 6282 ** We received an unknown message 6283 ** 6284 **----------------------------------------------- 6285 */ 6286 6287 PRINT_ADDR(cp->ccb); 6288 printf ("MSG_MESSAGE_REJECT sent for "); 6289 (void) ncr_show_msg (np->msgin); 6290 printf (".\n"); 6291 break; 6292 6293 /*-------------------------------------------------------------------- 6294 ** 6295 ** Processing of special messages 6296 ** 6297 **-------------------------------------------------------------------- 6298 */ 6299 6300 case SIR_IGN_RESIDUE: 6301 /*----------------------------------------------- 6302 ** 6303 ** We received an IGNORE RESIDUE message, 6304 ** which couldn't be handled by the script. 6305 ** 6306 **----------------------------------------------- 6307 */ 6308 6309 PRINT_ADDR(cp->ccb); 6310 printf ("MSG_IGN_WIDE_RESIDUE received, but not yet implemented.\n"); 6311 break; 6312 6313 case SIR_MISSING_SAVE: 6314 /*----------------------------------------------- 6315 ** 6316 ** We received an DISCONNECT message, 6317 ** but the datapointer wasn't saved before. 6318 ** 6319 **----------------------------------------------- 6320 */ 6321 6322 PRINT_ADDR(cp->ccb); 6323 printf ("MSG_DISCONNECT received, but datapointer not saved:\n" 6324 "\tdata=%x save=%x goal=%x.\n", 6325 (unsigned) INL (nc_temp), 6326 (unsigned) np->header.savep, 6327 (unsigned) np->header.goalp); 6328 break; 6329 6330 /*-------------------------------------------------------------------- 6331 ** 6332 ** Processing of a "SCSI_STATUS_QUEUE_FULL" status. 6333 ** 6334 ** XXX JGibbs - We should do the same thing for BUSY status. 6335 ** 6336 ** The current command has been rejected, 6337 ** because there are too many in the command queue. 6338 ** We have started too many commands for that target. 6339 ** 6340 **-------------------------------------------------------------------- 6341 */ 6342 case SIR_STALL_QUEUE: 6343 cp->xerr_status = XE_OK; 6344 cp->host_status = HS_COMPLETE; 6345 cp->s_status = SCSI_STATUS_QUEUE_FULL; 6346 ncr_freeze_devq(np, cp->ccb->ccb_h.path); 6347 ncr_complete(np, cp); 6348 6349 /* FALL THROUGH */ 6350 6351 case SIR_STALL_RESTART: 6352 /*----------------------------------------------- 6353 ** 6354 ** Enable selecting again, 6355 ** if NO disconnected jobs. 6356 ** 6357 **----------------------------------------------- 6358 */ 6359 /* 6360 ** Look for a disconnected job. 6361 */ 6362 cp = np->link_nccb; 6363 while (cp && cp->host_status != HS_DISCONNECT) 6364 cp = cp->link_nccb; 6365 6366 /* 6367 ** if there is one, ... 6368 */ 6369 if (cp) { 6370 /* 6371 ** wait for reselection 6372 */ 6373 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, reselect)); 6374 return; 6375 }; 6376 6377 /* 6378 ** else remove the interrupt. 6379 */ 6380 6381 printf ("%s: queue empty.\n", ncr_name (np)); 6382 WRITESCRIPT(start1[0], SCR_INT ^ IFFALSE (0)); 6383 break; 6384 }; 6385 6386 out: 6387 OUTB (nc_dcntl, np->rv_dcntl | STD); 6388 } 6389 6390 /*========================================================== 6391 ** 6392 ** 6393 ** Aquire a control block 6394 ** 6395 ** 6396 **========================================================== 6397 */ 6398 6399 static nccb_p ncr_get_nccb 6400 (ncb_p np, u_long target, u_long lun) 6401 { 6402 lcb_p lp; 6403 nccb_p cp = NULL; 6404 6405 /* Keep our timeout handler out */ 6406 crit_enter(); 6407 6408 /* 6409 ** Lun structure available ? 6410 */ 6411 6412 lp = np->target[target].lp[lun]; 6413 if (lp) { 6414 cp = lp->next_nccb; 6415 6416 /* 6417 ** Look for free CCB 6418 */ 6419 6420 while (cp && cp->magic) { 6421 cp = cp->next_nccb; 6422 } 6423 } 6424 6425 /* 6426 ** if nothing available, create one. 6427 */ 6428 6429 if (cp == NULL) 6430 cp = ncr_alloc_nccb(np, target, lun); 6431 6432 if (cp != NULL) { 6433 if (cp->magic) { 6434 printf("%s: Bogus free cp found\n", ncr_name(np)); 6435 crit_exit(); 6436 return (NULL); 6437 } 6438 cp->magic = 1; 6439 } 6440 crit_exit(); 6441 return (cp); 6442 } 6443 6444 /*========================================================== 6445 ** 6446 ** 6447 ** Release one control block 6448 ** 6449 ** 6450 **========================================================== 6451 */ 6452 6453 void ncr_free_nccb (ncb_p np, nccb_p cp) 6454 { 6455 /* 6456 ** sanity 6457 */ 6458 6459 assert (cp != NULL); 6460 6461 cp -> host_status = HS_IDLE; 6462 cp -> magic = 0; 6463 } 6464 6465 /*========================================================== 6466 ** 6467 ** 6468 ** Allocation of resources for Targets/Luns/Tags. 6469 ** 6470 ** 6471 **========================================================== 6472 */ 6473 6474 static nccb_p 6475 ncr_alloc_nccb (ncb_p np, u_long target, u_long lun) 6476 { 6477 tcb_p tp; 6478 lcb_p lp; 6479 nccb_p cp; 6480 6481 assert (np != NULL); 6482 6483 if (target>=MAX_TARGET) return(NULL); 6484 if (lun >=MAX_LUN ) return(NULL); 6485 6486 tp=&np->target[target]; 6487 6488 if (!tp->jump_tcb.l_cmd) { 6489 6490 /* 6491 ** initialize it. 6492 */ 6493 tp->jump_tcb.l_cmd = (SCR_JUMP^IFFALSE (DATA (0x80 + target))); 6494 tp->jump_tcb.l_paddr = np->jump_tcb.l_paddr; 6495 6496 tp->getscr[0] = 6497 (np->features & FE_PFEN)? SCR_COPY(1) : SCR_COPY_F(1); 6498 tp->getscr[1] = vtophys (&tp->tinfo.sval); 6499 tp->getscr[2] = rman_get_start(np->reg_res) + offsetof (struct ncr_reg, nc_sxfer); 6500 tp->getscr[3] = 6501 (np->features & FE_PFEN)? SCR_COPY(1) : SCR_COPY_F(1); 6502 tp->getscr[4] = vtophys (&tp->tinfo.wval); 6503 tp->getscr[5] = rman_get_start(np->reg_res) + offsetof (struct ncr_reg, nc_scntl3); 6504 6505 assert (((offsetof(struct ncr_reg, nc_sxfer) ^ 6506 (offsetof(struct tcb ,tinfo) 6507 + offsetof(struct ncr_target_tinfo, sval))) & 3) == 0); 6508 assert (((offsetof(struct ncr_reg, nc_scntl3) ^ 6509 (offsetof(struct tcb, tinfo) 6510 + offsetof(struct ncr_target_tinfo, wval))) &3) == 0); 6511 6512 tp->call_lun.l_cmd = (SCR_CALL); 6513 tp->call_lun.l_paddr = NCB_SCRIPT_PHYS (np, resel_lun); 6514 6515 tp->jump_lcb.l_cmd = (SCR_JUMP); 6516 tp->jump_lcb.l_paddr = NCB_SCRIPTH_PHYS (np, abort); 6517 np->jump_tcb.l_paddr = vtophys (&tp->jump_tcb); 6518 } 6519 6520 /* 6521 ** Logic unit control block 6522 */ 6523 lp = tp->lp[lun]; 6524 if (!lp) { 6525 /* 6526 ** Allocate a lcb 6527 */ 6528 lp = malloc (sizeof (struct lcb), M_DEVBUF, M_WAITOK | M_ZERO); 6529 6530 /* 6531 ** Initialize it 6532 */ 6533 lp->jump_lcb.l_cmd = (SCR_JUMP ^ IFFALSE (DATA (lun))); 6534 lp->jump_lcb.l_paddr = tp->jump_lcb.l_paddr; 6535 6536 lp->call_tag.l_cmd = (SCR_CALL); 6537 lp->call_tag.l_paddr = NCB_SCRIPT_PHYS (np, resel_tag); 6538 6539 lp->jump_nccb.l_cmd = (SCR_JUMP); 6540 lp->jump_nccb.l_paddr = NCB_SCRIPTH_PHYS (np, aborttag); 6541 6542 lp->actlink = 1; 6543 6544 /* 6545 ** Chain into LUN list 6546 */ 6547 tp->jump_lcb.l_paddr = vtophys (&lp->jump_lcb); 6548 tp->lp[lun] = lp; 6549 6550 } 6551 6552 /* 6553 ** Allocate a nccb 6554 */ 6555 cp = malloc (sizeof (struct nccb), M_DEVBUF, M_WAITOK | M_ZERO); 6556 6557 if (DEBUG_FLAGS & DEBUG_ALLOC) { 6558 printf ("new nccb @%p.\n", cp); 6559 } 6560 6561 /* 6562 ** Fill in physical addresses 6563 */ 6564 6565 cp->p_nccb = vtophys (cp); 6566 6567 /* 6568 ** Chain into reselect list 6569 */ 6570 cp->jump_nccb.l_cmd = SCR_JUMP; 6571 cp->jump_nccb.l_paddr = lp->jump_nccb.l_paddr; 6572 lp->jump_nccb.l_paddr = CCB_PHYS (cp, jump_nccb); 6573 cp->call_tmp.l_cmd = SCR_CALL; 6574 cp->call_tmp.l_paddr = NCB_SCRIPT_PHYS (np, resel_tmp); 6575 6576 /* 6577 ** Chain into wakeup list 6578 */ 6579 cp->link_nccb = np->link_nccb; 6580 np->link_nccb = cp; 6581 6582 /* 6583 ** Chain into CCB list 6584 */ 6585 cp->next_nccb = lp->next_nccb; 6586 lp->next_nccb = cp; 6587 6588 return (cp); 6589 } 6590 6591 /*========================================================== 6592 ** 6593 ** 6594 ** Build Scatter Gather Block 6595 ** 6596 ** 6597 **========================================================== 6598 ** 6599 ** The transfer area may be scattered among 6600 ** several non adjacent physical pages. 6601 ** 6602 ** We may use MAX_SCATTER blocks. 6603 ** 6604 **---------------------------------------------------------- 6605 */ 6606 6607 static int ncr_scatter 6608 (struct dsb* phys, vm_offset_t vaddr, vm_size_t datalen) 6609 { 6610 u_long paddr, pnext; 6611 6612 u_short segment = 0; 6613 u_long segsize, segaddr; 6614 u_long size, csize = 0; 6615 u_long chunk = MAX_SIZE; 6616 int free; 6617 6618 bzero (&phys->data, sizeof (phys->data)); 6619 if (!datalen) return (0); 6620 6621 paddr = vtophys (vaddr); 6622 6623 /* 6624 ** insert extra break points at a distance of chunk. 6625 ** We try to reduce the number of interrupts caused 6626 ** by unexpected phase changes due to disconnects. 6627 ** A typical harddisk may disconnect before ANY block. 6628 ** If we wanted to avoid unexpected phase changes at all 6629 ** we had to use a break point every 512 bytes. 6630 ** Of course the number of scatter/gather blocks is 6631 ** limited. 6632 */ 6633 6634 free = MAX_SCATTER - 1; 6635 6636 if (vaddr & PAGE_MASK) free -= datalen / PAGE_SIZE; 6637 6638 if (free>1) 6639 while ((chunk * free >= 2 * datalen) && (chunk>=1024)) 6640 chunk /= 2; 6641 6642 if(DEBUG_FLAGS & DEBUG_SCATTER) 6643 printf("ncr?:\tscattering virtual=%p size=%d chunk=%d.\n", 6644 (void *) vaddr, (unsigned) datalen, (unsigned) chunk); 6645 6646 /* 6647 ** Build data descriptors. 6648 */ 6649 while (datalen && (segment < MAX_SCATTER)) { 6650 6651 /* 6652 ** this segment is empty 6653 */ 6654 segsize = 0; 6655 segaddr = paddr; 6656 pnext = paddr; 6657 6658 if (!csize) csize = chunk; 6659 6660 while ((datalen) && (paddr == pnext) && (csize)) { 6661 6662 /* 6663 ** continue this segment 6664 */ 6665 pnext = (paddr & (~PAGE_MASK)) + PAGE_SIZE; 6666 6667 /* 6668 ** Compute max size 6669 */ 6670 6671 size = pnext - paddr; /* page size */ 6672 if (size > datalen) size = datalen; /* data size */ 6673 if (size > csize ) size = csize ; /* chunksize */ 6674 6675 segsize += size; 6676 vaddr += size; 6677 csize -= size; 6678 datalen -= size; 6679 paddr = vtophys (vaddr); 6680 }; 6681 6682 if(DEBUG_FLAGS & DEBUG_SCATTER) 6683 printf ("\tseg #%d addr=%x size=%d (rest=%d).\n", 6684 segment, 6685 (unsigned) segaddr, 6686 (unsigned) segsize, 6687 (unsigned) datalen); 6688 6689 phys->data[segment].addr = segaddr; 6690 phys->data[segment].size = segsize; 6691 segment++; 6692 } 6693 6694 if (datalen) { 6695 printf("ncr?: scatter/gather failed (residue=%d).\n", 6696 (unsigned) datalen); 6697 return (-1); 6698 }; 6699 6700 return (segment); 6701 } 6702 6703 /*========================================================== 6704 ** 6705 ** 6706 ** Test the pci bus snoop logic :-( 6707 ** 6708 ** Has to be called with interrupts disabled. 6709 ** 6710 ** 6711 **========================================================== 6712 */ 6713 6714 #ifndef NCR_IOMAPPED 6715 static int ncr_regtest (struct ncb* np) 6716 { 6717 volatile u_int32_t data; 6718 /* 6719 ** ncr registers may NOT be cached. 6720 ** write 0xffffffff to a read only register area, 6721 ** and try to read it back. 6722 */ 6723 data = 0xffffffff; 6724 OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data); 6725 data = INL_OFF(offsetof(struct ncr_reg, nc_dstat)); 6726 #if 1 6727 if (data == 0xffffffff) { 6728 #else 6729 if ((data & 0xe2f0fffd) != 0x02000080) { 6730 #endif 6731 printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", 6732 (unsigned) data); 6733 return (0x10); 6734 }; 6735 return (0); 6736 } 6737 #endif 6738 6739 static int ncr_snooptest (struct ncb* np) 6740 { 6741 u_int32_t ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc; 6742 int i, err=0; 6743 #ifndef NCR_IOMAPPED 6744 err |= ncr_regtest (np); 6745 if (err) return (err); 6746 #endif 6747 /* 6748 ** init 6749 */ 6750 pc = NCB_SCRIPTH_PHYS (np, snooptest); 6751 host_wr = 1; 6752 ncr_wr = 2; 6753 /* 6754 ** Set memory and register. 6755 */ 6756 ncr_cache = host_wr; 6757 OUTL (nc_temp, ncr_wr); 6758 /* 6759 ** Start script (exchange values) 6760 */ 6761 OUTL (nc_dsp, pc); 6762 /* 6763 ** Wait 'til done (with timeout) 6764 */ 6765 for (i=0; i<NCR_SNOOP_TIMEOUT; i++) 6766 if (INB(nc_istat) & (INTF|SIP|DIP)) 6767 break; 6768 /* 6769 ** Save termination position. 6770 */ 6771 pc = INL (nc_dsp); 6772 /* 6773 ** Read memory and register. 6774 */ 6775 host_rd = ncr_cache; 6776 ncr_rd = INL (nc_scratcha); 6777 ncr_bk = INL (nc_temp); 6778 /* 6779 ** Reset ncr chip 6780 */ 6781 OUTB (nc_istat, SRST); 6782 DELAY (1000); 6783 OUTB (nc_istat, 0 ); 6784 /* 6785 ** check for timeout 6786 */ 6787 if (i>=NCR_SNOOP_TIMEOUT) { 6788 printf ("CACHE TEST FAILED: timeout.\n"); 6789 return (0x20); 6790 }; 6791 /* 6792 ** Check termination position. 6793 */ 6794 if (pc != NCB_SCRIPTH_PHYS (np, snoopend)+8) { 6795 printf ("CACHE TEST FAILED: script execution failed.\n"); 6796 printf ("start=%08lx, pc=%08lx, end=%08lx\n", 6797 (u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc, 6798 (u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8); 6799 return (0x40); 6800 }; 6801 /* 6802 ** Show results. 6803 */ 6804 if (host_wr != ncr_rd) { 6805 printf ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n", 6806 (int) host_wr, (int) ncr_rd); 6807 err |= 1; 6808 }; 6809 if (host_rd != ncr_wr) { 6810 printf ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n", 6811 (int) ncr_wr, (int) host_rd); 6812 err |= 2; 6813 }; 6814 if (ncr_bk != ncr_wr) { 6815 printf ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n", 6816 (int) ncr_wr, (int) ncr_bk); 6817 err |= 4; 6818 }; 6819 return (err); 6820 } 6821 6822 /*========================================================== 6823 ** 6824 ** 6825 ** Profiling the drivers and targets performance. 6826 ** 6827 ** 6828 **========================================================== 6829 */ 6830 6831 /* 6832 ** Compute the difference in milliseconds. 6833 **/ 6834 6835 static int ncr_delta (int *from, int *to) 6836 { 6837 if (!from) return (-1); 6838 if (!to) return (-2); 6839 return ((to - from) * 1000 / hz); 6840 } 6841 6842 #define PROFILE cp->phys.header.stamp 6843 static void ncb_profile (ncb_p np, nccb_p cp) 6844 { 6845 int co, da, st, en, di, se, post,work,disc; 6846 u_long diff; 6847 6848 PROFILE.end = ticks; 6849 6850 st = ncr_delta (&PROFILE.start,&PROFILE.status); 6851 if (st<0) return; /* status not reached */ 6852 6853 da = ncr_delta (&PROFILE.start,&PROFILE.data); 6854 if (da<0) return; /* No data transfer phase */ 6855 6856 co = ncr_delta (&PROFILE.start,&PROFILE.command); 6857 if (co<0) return; /* command not executed */ 6858 6859 en = ncr_delta (&PROFILE.start,&PROFILE.end), 6860 di = ncr_delta (&PROFILE.start,&PROFILE.disconnect), 6861 se = ncr_delta (&PROFILE.start,&PROFILE.select); 6862 post = en - st; 6863 6864 /* 6865 ** @PROFILE@ Disconnect time invalid if multiple disconnects 6866 */ 6867 6868 if (di>=0) disc = se-di; else disc = 0; 6869 6870 work = (st - co) - disc; 6871 6872 diff = (np->disc_phys - np->disc_ref) & 0xff; 6873 np->disc_ref += diff; 6874 6875 np->profile.num_trans += 1; 6876 if (cp->ccb) 6877 np->profile.num_bytes += cp->ccb->csio.dxfer_len; 6878 np->profile.num_disc += diff; 6879 np->profile.ms_setup += co; 6880 np->profile.ms_data += work; 6881 np->profile.ms_disc += disc; 6882 np->profile.ms_post += post; 6883 } 6884 #undef PROFILE 6885 6886 /*========================================================== 6887 ** 6888 ** Determine the ncr's clock frequency. 6889 ** This is essential for the negotiation 6890 ** of the synchronous transfer rate. 6891 ** 6892 **========================================================== 6893 ** 6894 ** Note: we have to return the correct value. 6895 ** THERE IS NO SAVE DEFAULT VALUE. 6896 ** 6897 ** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock. 6898 ** 53C860 and 53C875 rev. 1 support fast20 transfers but 6899 ** do not have a clock doubler and so are provided with a 6900 ** 80 MHz clock. All other fast20 boards incorporate a doubler 6901 ** and so should be delivered with a 40 MHz clock. 6902 ** The future fast40 chips (895/895) use a 40 Mhz base clock 6903 ** and provide a clock quadrupler (160 Mhz). The code below 6904 ** tries to deal as cleverly as possible with all this stuff. 6905 ** 6906 **---------------------------------------------------------- 6907 */ 6908 6909 /* 6910 * Select NCR SCSI clock frequency 6911 */ 6912 static void ncr_selectclock(ncb_p np, u_char scntl3) 6913 { 6914 if (np->multiplier < 2) { 6915 OUTB(nc_scntl3, scntl3); 6916 return; 6917 } 6918 6919 if (bootverbose >= 2) 6920 printf ("%s: enabling clock multiplier\n", ncr_name(np)); 6921 6922 OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */ 6923 if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */ 6924 int i = 20; 6925 while (!(INB(nc_stest4) & LCKFRQ) && --i > 0) 6926 DELAY(20); 6927 if (!i) 6928 printf("%s: the chip cannot lock the frequency\n", ncr_name(np)); 6929 } else /* Wait 20 micro-seconds for doubler */ 6930 DELAY(20); 6931 OUTB(nc_stest3, HSC); /* Halt the scsi clock */ 6932 OUTB(nc_scntl3, scntl3); 6933 OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ 6934 OUTB(nc_stest3, 0x00); /* Restart scsi clock */ 6935 } 6936 6937 /* 6938 * calculate NCR SCSI clock frequency (in KHz) 6939 */ 6940 static unsigned 6941 ncrgetfreq (ncb_p np, int gen) 6942 { 6943 int ms = 0; 6944 /* 6945 * Measure GEN timer delay in order 6946 * to calculate SCSI clock frequency 6947 * 6948 * This code will never execute too 6949 * many loop iterations (if DELAY is 6950 * reasonably correct). It could get 6951 * too low a delay (too high a freq.) 6952 * if the CPU is slow executing the 6953 * loop for some reason (an NMI, for 6954 * example). For this reason we will 6955 * if multiple measurements are to be 6956 * performed trust the higher delay 6957 * (lower frequency returned). 6958 */ 6959 OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */ 6960 OUTW (nc_sien , 0); /* mask all scsi interrupts */ 6961 (void) INW (nc_sist); /* clear pending scsi interrupt */ 6962 OUTB (nc_dien , 0); /* mask all dma interrupts */ 6963 (void) INW (nc_sist); /* another one, just to be sure :) */ 6964 OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */ 6965 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6966 OUTB (nc_stime1, gen); /* set to nominal delay of (1<<gen) * 125us */ 6967 while (!(INW(nc_sist) & GEN) && ms++ < 1000) 6968 DELAY(1000); /* count ms */ 6969 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6970 OUTB (nc_scntl3, 0); 6971 /* 6972 * Set prescaler to divide by whatever "0" means. 6973 * "0" ought to choose divide by 2, but appears 6974 * to set divide by 3.5 mode in my 53c810 ... 6975 */ 6976 OUTB (nc_scntl3, 0); 6977 6978 if (bootverbose >= 2) 6979 printf ("\tDelay (GEN=%d): %u msec\n", gen, ms); 6980 /* 6981 * adjust for prescaler, and convert into KHz 6982 */ 6983 return ms ? ((1 << gen) * 4440) / ms : 0; 6984 } 6985 6986 static void ncr_getclock (ncb_p np, u_char multiplier) 6987 { 6988 unsigned char scntl3; 6989 unsigned char stest1; 6990 scntl3 = INB(nc_scntl3); 6991 stest1 = INB(nc_stest1); 6992 6993 np->multiplier = 1; 6994 6995 if (multiplier > 1) { 6996 np->multiplier = multiplier; 6997 np->clock_khz = 40000 * multiplier; 6998 } else { 6999 if ((scntl3 & 7) == 0) { 7000 unsigned f1, f2; 7001 /* throw away first result */ 7002 (void) ncrgetfreq (np, 11); 7003 f1 = ncrgetfreq (np, 11); 7004 f2 = ncrgetfreq (np, 11); 7005 7006 if (bootverbose >= 2) 7007 printf ("\tNCR clock is %uKHz, %uKHz\n", f1, f2); 7008 if (f1 > f2) f1 = f2; /* trust lower result */ 7009 if (f1 > 45000) { 7010 scntl3 = 5; /* >45Mhz: assume 80MHz */ 7011 } else { 7012 scntl3 = 3; /* <45Mhz: assume 40MHz */ 7013 } 7014 } 7015 else if ((scntl3 & 7) == 5) 7016 np->clock_khz = 80000; /* Probably a 875 rev. 1 ? */ 7017 } 7018 } 7019 7020 /*=========================================================================*/ 7021 7022 #ifdef NCR_TEKRAM_EEPROM 7023 7024 struct tekram_eeprom_dev { 7025 u_char devmode; 7026 #define TKR_PARCHK 0x01 7027 #define TKR_TRYSYNC 0x02 7028 #define TKR_ENDISC 0x04 7029 #define TKR_STARTUNIT 0x08 7030 #define TKR_USETAGS 0x10 7031 #define TKR_TRYWIDE 0x20 7032 u_char syncparam; /* max. sync transfer rate (table ?) */ 7033 u_char filler1; 7034 u_char filler2; 7035 }; 7036 7037 7038 struct tekram_eeprom { 7039 struct tekram_eeprom_dev 7040 dev[16]; 7041 u_char adaptid; 7042 u_char adaptmode; 7043 #define TKR_ADPT_GT2DRV 0x01 7044 #define TKR_ADPT_GT1GB 0x02 7045 #define TKR_ADPT_RSTBUS 0x04 7046 #define TKR_ADPT_ACTNEG 0x08 7047 #define TKR_ADPT_NOSEEK 0x10 7048 #define TKR_ADPT_MORLUN 0x20 7049 u_char delay; /* unit ? ( table ??? ) */ 7050 u_char tags; /* use 4 times as many ... */ 7051 u_char filler[60]; 7052 }; 7053 7054 static void 7055 tekram_write_bit (ncb_p np, int bit) 7056 { 7057 u_char val = 0x10 + ((bit & 1) << 1); 7058 7059 DELAY(10); 7060 OUTB (nc_gpreg, val); 7061 DELAY(10); 7062 OUTB (nc_gpreg, val | 0x04); 7063 DELAY(10); 7064 OUTB (nc_gpreg, val); 7065 DELAY(10); 7066 } 7067 7068 static int 7069 tekram_read_bit (ncb_p np) 7070 { 7071 OUTB (nc_gpreg, 0x10); 7072 DELAY(10); 7073 OUTB (nc_gpreg, 0x14); 7074 DELAY(10); 7075 return INB (nc_gpreg) & 1; 7076 } 7077 7078 static u_short 7079 read_tekram_eeprom_reg (ncb_p np, int reg) 7080 { 7081 int bit; 7082 u_short result = 0; 7083 int cmd = 0x80 | reg; 7084 7085 OUTB (nc_gpreg, 0x10); 7086 7087 tekram_write_bit (np, 1); 7088 for (bit = 7; bit >= 0; bit--) 7089 { 7090 tekram_write_bit (np, cmd >> bit); 7091 } 7092 7093 for (bit = 0; bit < 16; bit++) 7094 { 7095 result <<= 1; 7096 result |= tekram_read_bit (np); 7097 } 7098 7099 OUTB (nc_gpreg, 0x00); 7100 return result; 7101 } 7102 7103 static int 7104 read_tekram_eeprom(ncb_p np, struct tekram_eeprom *buffer) 7105 { 7106 u_short *p = (u_short *) buffer; 7107 u_short sum = 0; 7108 int i; 7109 7110 if (INB (nc_gpcntl) != 0x09) 7111 { 7112 return 0; 7113 } 7114 for (i = 0; i < 64; i++) 7115 { 7116 u_short val; 7117 if((i&0x0f) == 0) printf ("%02x:", i*2); 7118 val = read_tekram_eeprom_reg (np, i); 7119 if (p) 7120 *p++ = val; 7121 sum += val; 7122 if((i&0x01) == 0x00) printf (" "); 7123 printf ("%02x%02x", val & 0xff, (val >> 8) & 0xff); 7124 if((i&0x0f) == 0x0f) printf ("\n"); 7125 } 7126 printf ("Sum = %04x\n", sum); 7127 return sum == 0x1234; 7128 } 7129 #endif /* NCR_TEKRAM_EEPROM */ 7130 7131 static device_method_t ncr_methods[] = { 7132 /* Device interface */ 7133 DEVMETHOD(device_probe, ncr_probe), 7134 DEVMETHOD(device_attach, ncr_attach), 7135 7136 { 0, 0 } 7137 }; 7138 7139 static driver_t ncr_driver = { 7140 "ncr", 7141 ncr_methods, 7142 sizeof(struct ncb), 7143 }; 7144 7145 static devclass_t ncr_devclass; 7146 7147 DRIVER_MODULE(if_ncr, pci, ncr_driver, ncr_devclass, 0, 0); 7148 7149 /*=========================================================================*/ 7150 #endif /* _KERNEL */ 7151