1 /************************************************************************** 2 ** 3 ** $FreeBSD: src/sys/pci/ncr.c,v 1.155.2.3 2001/03/05 13:09:10 obrien Exp $ 4 ** 5 ** Device driver for the NCR 53C8XX PCI-SCSI-Controller Family. 6 ** 7 **------------------------------------------------------------------------- 8 ** 9 ** Written for 386bsd and FreeBSD by 10 ** Wolfgang Stanglmeier <wolf@cologne.de> 11 ** Stefan Esser <se@mi.Uni-Koeln.de> 12 ** 13 **------------------------------------------------------------------------- 14 ** 15 ** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved. 16 ** 17 ** Redistribution and use in source and binary forms, with or without 18 ** modification, are permitted provided that the following conditions 19 ** are met: 20 ** 1. Redistributions of source code must retain the above copyright 21 ** notice, this list of conditions and the following disclaimer. 22 ** 2. Redistributions in binary form must reproduce the above copyright 23 ** notice, this list of conditions and the following disclaimer in the 24 ** documentation and/or other materials provided with the distribution. 25 ** 3. The name of the author may not be used to endorse or promote products 26 ** derived from this software without specific prior written permission. 27 ** 28 ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 29 ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 30 ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 31 ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 32 ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 33 ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 34 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 35 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 36 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 37 ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 38 ** 39 *************************************************************************** 40 */ 41 42 #define NCR_DATE "pl30 98/1/1" 43 44 #define NCR_VERSION (2) 45 #define MAX_UNITS (16) 46 47 #define NCR_GETCC_WITHMSG 48 49 #if (defined(__DragonFly__) || defined (__FreeBSD__)) && defined(_KERNEL) 50 #include "opt_ncr.h" 51 #endif 52 53 /*========================================================== 54 ** 55 ** Configuration and Debugging 56 ** 57 ** May be overwritten in <arch/conf/xxxx> 58 ** 59 **========================================================== 60 */ 61 62 /* 63 ** SCSI address of this device. 64 ** The boot routines should have set it. 65 ** If not, use this. 66 */ 67 68 #ifndef SCSI_NCR_MYADDR 69 #define SCSI_NCR_MYADDR (7) 70 #endif /* SCSI_NCR_MYADDR */ 71 72 /* 73 ** The default synchronous period factor 74 ** (0=asynchronous) 75 ** If maximum synchronous frequency is defined, use it instead. 76 */ 77 78 #ifndef SCSI_NCR_MAX_SYNC 79 80 #ifndef SCSI_NCR_DFLT_SYNC 81 #define SCSI_NCR_DFLT_SYNC (12) 82 #endif /* SCSI_NCR_DFLT_SYNC */ 83 84 #else 85 86 #if SCSI_NCR_MAX_SYNC == 0 87 #define SCSI_NCR_DFLT_SYNC 0 88 #else 89 #define SCSI_NCR_DFLT_SYNC (250000 / SCSI_NCR_MAX_SYNC) 90 #endif 91 92 #endif 93 94 /* 95 ** The minimal asynchronous pre-scaler period (ns) 96 ** Shall be 40. 97 */ 98 99 #ifndef SCSI_NCR_MIN_ASYNC 100 #define SCSI_NCR_MIN_ASYNC (40) 101 #endif /* SCSI_NCR_MIN_ASYNC */ 102 103 /* 104 ** The maximal bus with (in log2 byte) 105 ** (0=8 bit, 1=16 bit) 106 */ 107 108 #ifndef SCSI_NCR_MAX_WIDE 109 #define SCSI_NCR_MAX_WIDE (1) 110 #endif /* SCSI_NCR_MAX_WIDE */ 111 112 /*========================================================== 113 ** 114 ** Configuration and Debugging 115 ** 116 **========================================================== 117 */ 118 119 /* 120 ** Number of targets supported by the driver. 121 ** n permits target numbers 0..n-1. 122 ** Default is 7, meaning targets #0..#6. 123 ** #7 .. is myself. 124 */ 125 126 #define MAX_TARGET (16) 127 128 /* 129 ** Number of logic units supported by the driver. 130 ** n enables logic unit numbers 0..n-1. 131 ** The common SCSI devices require only 132 ** one lun, so take 1 as the default. 133 */ 134 135 #ifndef MAX_LUN 136 #define MAX_LUN (8) 137 #endif /* MAX_LUN */ 138 139 /* 140 ** The maximum number of jobs scheduled for starting. 141 ** There should be one slot per target, and one slot 142 ** for each tag of each target in use. 143 */ 144 145 #define MAX_START (256) 146 147 /* 148 ** The maximum number of segments a transfer is split into. 149 */ 150 151 #define MAX_SCATTER (33) 152 153 /* 154 ** The maximum transfer length (should be >= 64k). 155 ** MUST NOT be greater than (MAX_SCATTER-1) * PAGE_SIZE. 156 */ 157 158 #define MAX_SIZE ((MAX_SCATTER-1) * (long) PAGE_SIZE) 159 160 /* 161 ** other 162 */ 163 164 #define NCR_SNOOP_TIMEOUT (1000000) 165 166 /*========================================================== 167 ** 168 ** Include files 169 ** 170 **========================================================== 171 */ 172 173 #include <sys/param.h> 174 #include <sys/time.h> 175 176 #ifdef _KERNEL 177 #include <sys/systm.h> 178 #include <sys/malloc.h> 179 #include <sys/buf.h> 180 #include <sys/kernel.h> 181 #include <sys/sysctl.h> 182 #include <sys/bus.h> 183 #include <sys/thread2.h> 184 #include <machine/clock.h> 185 #include <machine/md_var.h> 186 #include <sys/rman.h> 187 #include <vm/vm.h> 188 #include <vm/pmap.h> 189 #include <vm/vm_extern.h> 190 #endif 191 192 #include <bus/pci/pcivar.h> 193 #include <bus/pci/pcireg.h> 194 #include "ncrreg.h" 195 196 #include <bus/cam/cam.h> 197 #include <bus/cam/cam_ccb.h> 198 #include <bus/cam/cam_sim.h> 199 #include <bus/cam/cam_xpt_sim.h> 200 #include <bus/cam/cam_debug.h> 201 202 #include <bus/cam/scsi/scsi_all.h> 203 #include <bus/cam/scsi/scsi_message.h> 204 205 /*========================================================== 206 ** 207 ** Debugging tags 208 ** 209 **========================================================== 210 */ 211 212 #define DEBUG_ALLOC (0x0001) 213 #define DEBUG_PHASE (0x0002) 214 #define DEBUG_POLL (0x0004) 215 #define DEBUG_QUEUE (0x0008) 216 #define DEBUG_RESULT (0x0010) 217 #define DEBUG_SCATTER (0x0020) 218 #define DEBUG_SCRIPT (0x0040) 219 #define DEBUG_TINY (0x0080) 220 #define DEBUG_TIMING (0x0100) 221 #define DEBUG_NEGO (0x0200) 222 #define DEBUG_TAGS (0x0400) 223 #define DEBUG_FREEZE (0x0800) 224 #define DEBUG_RESTART (0x1000) 225 226 /* 227 ** Enable/Disable debug messages. 228 ** Can be changed at runtime too. 229 */ 230 #ifdef SCSI_NCR_DEBUG 231 #define DEBUG_FLAGS ncr_debug 232 #else /* SCSI_NCR_DEBUG */ 233 #define SCSI_NCR_DEBUG 0 234 #define DEBUG_FLAGS 0 235 #endif /* SCSI_NCR_DEBUG */ 236 237 238 239 /*========================================================== 240 ** 241 ** assert () 242 ** 243 **========================================================== 244 ** 245 ** modified copy from 386bsd:/usr/include/sys/assert.h 246 ** 247 **---------------------------------------------------------- 248 */ 249 250 #ifdef DIAGNOSTIC 251 #define assert(expression) { \ 252 if (!(expression)) { \ 253 (void)kprintf("assertion \"%s\" failed: " \ 254 "file \"%s\", line %d\n", \ 255 #expression, __FILE__, __LINE__); \ 256 Debugger(""); \ 257 } \ 258 } 259 #else 260 #define assert(expression) { \ 261 if (!(expression)) { \ 262 (void)kprintf("assertion \"%s\" failed: " \ 263 "file \"%s\", line %d\n", \ 264 #expression, __FILE__, __LINE__); \ 265 } \ 266 } 267 #endif 268 269 /*========================================================== 270 ** 271 ** Access to the controller chip. 272 ** 273 **========================================================== 274 */ 275 276 #define INB(r) bus_space_read_1(np->bst, np->bsh, offsetof(struct ncr_reg, r)) 277 #define INW(r) bus_space_read_2(np->bst, np->bsh, offsetof(struct ncr_reg, r)) 278 #define INL(r) bus_space_read_4(np->bst, np->bsh, offsetof(struct ncr_reg, r)) 279 280 #define OUTB(r, val) bus_space_write_1(np->bst, np->bsh, \ 281 offsetof(struct ncr_reg, r), val) 282 #define OUTW(r, val) bus_space_write_2(np->bst, np->bsh, \ 283 offsetof(struct ncr_reg, r), val) 284 #define OUTL(r, val) bus_space_write_4(np->bst, np->bsh, \ 285 offsetof(struct ncr_reg, r), val) 286 #define OUTL_OFF(o, val) bus_space_write_4(np->bst, np->bsh, o, val) 287 288 #define INB_OFF(o) bus_space_read_1(np->bst, np->bsh, o) 289 #define INW_OFF(o) bus_space_read_2(np->bst, np->bsh, o) 290 #define INL_OFF(o) bus_space_read_4(np->bst, np->bsh, o) 291 292 #define READSCRIPT_OFF(base, off) \ 293 (base ? *((volatile u_int32_t *)((volatile char *)base + (off))) : \ 294 bus_space_read_4(np->bst2, np->bsh2, off)) 295 296 #define WRITESCRIPT_OFF(base, off, val) \ 297 do { \ 298 if (base) \ 299 *((volatile u_int32_t *) \ 300 ((volatile char *)base + (off))) = (val); \ 301 else \ 302 bus_space_write_4(np->bst2, np->bsh2, off, val); \ 303 } while (0) 304 305 #define READSCRIPT(r) \ 306 READSCRIPT_OFF(np->script, offsetof(struct script, r)) 307 308 #define WRITESCRIPT(r, val) \ 309 WRITESCRIPT_OFF(np->script, offsetof(struct script, r), val) 310 311 /* 312 ** Set bit field ON, OFF 313 */ 314 315 #define OUTONB(r, m) OUTB(r, INB(r) | (m)) 316 #define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) 317 #define OUTONW(r, m) OUTW(r, INW(r) | (m)) 318 #define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) 319 #define OUTONL(r, m) OUTL(r, INL(r) | (m)) 320 #define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) 321 322 /*========================================================== 323 ** 324 ** Command control block states. 325 ** 326 **========================================================== 327 */ 328 329 #define HS_IDLE (0) 330 #define HS_BUSY (1) 331 #define HS_NEGOTIATE (2) /* sync/wide data transfer*/ 332 #define HS_DISCONNECT (3) /* Disconnected by target */ 333 334 #define HS_COMPLETE (4) 335 #define HS_SEL_TIMEOUT (5) /* Selection timeout */ 336 #define HS_RESET (6) /* SCSI reset */ 337 #define HS_ABORTED (7) /* Transfer aborted */ 338 #define HS_TIMEOUT (8) /* Software timeout */ 339 #define HS_FAIL (9) /* SCSI or PCI bus errors */ 340 #define HS_UNEXPECTED (10) /* Unexpected disconnect */ 341 #define HS_STALL (11) /* QUEUE FULL or BUSY */ 342 343 #define HS_DONEMASK (0xfc) 344 345 /*========================================================== 346 ** 347 ** Software Interrupt Codes 348 ** 349 **========================================================== 350 */ 351 352 #define SIR_SENSE_RESTART (1) 353 #define SIR_SENSE_FAILED (2) 354 #define SIR_STALL_RESTART (3) 355 #define SIR_STALL_QUEUE (4) 356 #define SIR_NEGO_SYNC (5) 357 #define SIR_NEGO_WIDE (6) 358 #define SIR_NEGO_FAILED (7) 359 #define SIR_NEGO_PROTO (8) 360 #define SIR_REJECT_RECEIVED (9) 361 #define SIR_REJECT_SENT (10) 362 #define SIR_IGN_RESIDUE (11) 363 #define SIR_MISSING_SAVE (12) 364 #define SIR_MAX (12) 365 366 /*========================================================== 367 ** 368 ** Extended error codes. 369 ** xerr_status field of struct nccb. 370 ** 371 **========================================================== 372 */ 373 374 #define XE_OK (0) 375 #define XE_EXTRA_DATA (1) /* unexpected data phase */ 376 #define XE_BAD_PHASE (2) /* illegal phase (4/5) */ 377 378 /*========================================================== 379 ** 380 ** Negotiation status. 381 ** nego_status field of struct nccb. 382 ** 383 **========================================================== 384 */ 385 386 #define NS_SYNC (1) 387 #define NS_WIDE (2) 388 389 /*========================================================== 390 ** 391 ** XXX These are no longer used. Remove once the 392 ** script is updated. 393 ** "Special features" of targets. 394 ** quirks field of struct tcb. 395 ** actualquirks field of struct nccb. 396 ** 397 **========================================================== 398 */ 399 400 #define QUIRK_AUTOSAVE (0x01) 401 #define QUIRK_NOMSG (0x02) 402 #define QUIRK_NOSYNC (0x10) 403 #define QUIRK_NOWIDE16 (0x20) 404 #define QUIRK_NOTAGS (0x40) 405 #define QUIRK_UPDATE (0x80) 406 407 /*========================================================== 408 ** 409 ** Misc. 410 ** 411 **========================================================== 412 */ 413 414 #define CCB_MAGIC (0xf2691ad2) 415 #define MAX_TAGS (32) /* hard limit */ 416 417 /*========================================================== 418 ** 419 ** OS dependencies. 420 ** 421 **========================================================== 422 */ 423 424 #define PRINT_ADDR(ccb) xpt_print_path((ccb)->ccb_h.path) 425 426 /*========================================================== 427 ** 428 ** Declaration of structs. 429 ** 430 **========================================================== 431 */ 432 433 struct tcb; 434 struct lcb; 435 struct nccb; 436 struct ncb; 437 struct script; 438 439 typedef struct ncb * ncb_p; 440 typedef struct tcb * tcb_p; 441 typedef struct lcb * lcb_p; 442 typedef struct nccb * nccb_p; 443 444 struct link { 445 ncrcmd l_cmd; 446 ncrcmd l_paddr; 447 }; 448 449 struct usrcmd { 450 u_long target; 451 u_long lun; 452 u_long data; 453 u_long cmd; 454 }; 455 456 #define UC_SETSYNC 10 457 #define UC_SETTAGS 11 458 #define UC_SETDEBUG 12 459 #define UC_SETORDER 13 460 #define UC_SETWIDE 14 461 #define UC_SETFLAG 15 462 463 #define UF_TRACE (0x01) 464 465 /*--------------------------------------- 466 ** 467 ** Timestamps for profiling 468 ** 469 **--------------------------------------- 470 */ 471 472 /* Type of the kernel variable `ticks'. XXX should be declared with the var. */ 473 typedef int ticks_t; 474 475 struct tstamp { 476 ticks_t start; 477 ticks_t end; 478 ticks_t select; 479 ticks_t command; 480 ticks_t data; 481 ticks_t status; 482 ticks_t disconnect; 483 }; 484 485 /* 486 ** profiling data (per device) 487 */ 488 489 struct profile { 490 u_long num_trans; 491 u_long num_bytes; 492 u_long num_disc; 493 u_long num_break; 494 u_long num_int; 495 u_long num_fly; 496 u_long ms_setup; 497 u_long ms_data; 498 u_long ms_disc; 499 u_long ms_post; 500 }; 501 502 /*========================================================== 503 ** 504 ** Declaration of structs: target control block 505 ** 506 **========================================================== 507 */ 508 509 #define NCR_TRANS_CUR 0x01 /* Modify current neogtiation status */ 510 #define NCR_TRANS_ACTIVE 0x03 /* Assume this is the active target */ 511 #define NCR_TRANS_GOAL 0x04 /* Modify negotiation goal */ 512 #define NCR_TRANS_USER 0x08 /* Modify user negotiation settings */ 513 514 struct ncr_transinfo { 515 u_int8_t width; 516 u_int8_t period; 517 u_int8_t offset; 518 }; 519 520 struct ncr_target_tinfo { 521 /* Hardware version of our sync settings */ 522 u_int8_t disc_tag; 523 #define NCR_CUR_DISCENB 0x01 524 #define NCR_CUR_TAGENB 0x02 525 #define NCR_USR_DISCENB 0x04 526 #define NCR_USR_TAGENB 0x08 527 u_int8_t sval; 528 struct ncr_transinfo current; 529 struct ncr_transinfo goal; 530 struct ncr_transinfo user; 531 /* Hardware version of our wide settings */ 532 u_int8_t wval; 533 }; 534 535 struct tcb { 536 /* 537 ** during reselection the ncr jumps to this point 538 ** with SFBR set to the encoded target number 539 ** with bit 7 set. 540 ** if it's not this target, jump to the next. 541 ** 542 ** JUMP IF (SFBR != #target#) 543 ** @(next tcb) 544 */ 545 546 struct link jump_tcb; 547 548 /* 549 ** load the actual values for the sxfer and the scntl3 550 ** register (sync/wide mode). 551 ** 552 ** SCR_COPY (1); 553 ** @(sval field of this tcb) 554 ** @(sxfer register) 555 ** SCR_COPY (1); 556 ** @(wval field of this tcb) 557 ** @(scntl3 register) 558 */ 559 560 ncrcmd getscr[6]; 561 562 /* 563 ** if next message is "identify" 564 ** then load the message to SFBR, 565 ** else load 0 to SFBR. 566 ** 567 ** CALL 568 ** <RESEL_LUN> 569 */ 570 571 struct link call_lun; 572 573 /* 574 ** now look for the right lun. 575 ** 576 ** JUMP 577 ** @(first nccb of this lun) 578 */ 579 580 struct link jump_lcb; 581 582 /* 583 ** pointer to interrupted getcc nccb 584 */ 585 586 nccb_p hold_cp; 587 588 /* 589 ** pointer to nccb used for negotiating. 590 ** Avoid to start a nego for all queued commands 591 ** when tagged command queuing is enabled. 592 */ 593 594 nccb_p nego_cp; 595 596 /* 597 ** statistical data 598 */ 599 600 u_long transfers; 601 u_long bytes; 602 603 /* 604 ** user settable limits for sync transfer 605 ** and tagged commands. 606 */ 607 608 struct ncr_target_tinfo tinfo; 609 610 /* 611 ** the lcb's of this tcb 612 */ 613 614 lcb_p lp[MAX_LUN]; 615 }; 616 617 /*========================================================== 618 ** 619 ** Declaration of structs: lun control block 620 ** 621 **========================================================== 622 */ 623 624 struct lcb { 625 /* 626 ** during reselection the ncr jumps to this point 627 ** with SFBR set to the "Identify" message. 628 ** if it's not this lun, jump to the next. 629 ** 630 ** JUMP IF (SFBR != #lun#) 631 ** @(next lcb of this target) 632 */ 633 634 struct link jump_lcb; 635 636 /* 637 ** if next message is "simple tag", 638 ** then load the tag to SFBR, 639 ** else load 0 to SFBR. 640 ** 641 ** CALL 642 ** <RESEL_TAG> 643 */ 644 645 struct link call_tag; 646 647 /* 648 ** now look for the right nccb. 649 ** 650 ** JUMP 651 ** @(first nccb of this lun) 652 */ 653 654 struct link jump_nccb; 655 656 /* 657 ** start of the nccb chain 658 */ 659 660 nccb_p next_nccb; 661 662 /* 663 ** Control of tagged queueing 664 */ 665 666 u_char reqnccbs; 667 u_char reqlink; 668 u_char actlink; 669 u_char usetags; 670 u_char lasttag; 671 }; 672 673 /*========================================================== 674 ** 675 ** Declaration of structs: COMMAND control block 676 ** 677 **========================================================== 678 ** 679 ** This substructure is copied from the nccb to a 680 ** global address after selection (or reselection) 681 ** and copied back before disconnect. 682 ** 683 ** These fields are accessible to the script processor. 684 ** 685 **---------------------------------------------------------- 686 */ 687 688 struct head { 689 /* 690 ** Execution of a nccb starts at this point. 691 ** It's a jump to the "SELECT" label 692 ** of the script. 693 ** 694 ** After successful selection the script 695 ** processor overwrites it with a jump to 696 ** the IDLE label of the script. 697 */ 698 699 struct link launch; 700 701 /* 702 ** Saved data pointer. 703 ** Points to the position in the script 704 ** responsible for the actual transfer 705 ** of data. 706 ** It's written after reception of a 707 ** "SAVE_DATA_POINTER" message. 708 ** The goalpointer points after 709 ** the last transfer command. 710 */ 711 712 u_int32_t savep; 713 u_int32_t lastp; 714 u_int32_t goalp; 715 716 /* 717 ** The virtual address of the nccb 718 ** containing this header. 719 */ 720 721 nccb_p cp; 722 723 /* 724 ** space for some timestamps to gather 725 ** profiling data about devices and this driver. 726 */ 727 728 struct tstamp stamp; 729 730 /* 731 ** status fields. 732 */ 733 734 u_char status[8]; 735 }; 736 737 /* 738 ** The status bytes are used by the host and the script processor. 739 ** 740 ** The first four byte are copied to the scratchb register 741 ** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect, 742 ** and copied back just after disconnecting. 743 ** Inside the script the XX_REG are used. 744 ** 745 ** The last four bytes are used inside the script by "COPY" commands. 746 ** Because source and destination must have the same alignment 747 ** in a longword, the fields HAVE to be at the choosen offsets. 748 ** xerr_st (4) 0 (0x34) scratcha 749 ** sync_st (5) 1 (0x05) sxfer 750 ** wide_st (7) 3 (0x03) scntl3 751 */ 752 753 /* 754 ** First four bytes (script) 755 */ 756 #define QU_REG scr0 757 #define HS_REG scr1 758 #define HS_PRT nc_scr1 759 #define SS_REG scr2 760 #define PS_REG scr3 761 762 /* 763 ** First four bytes (host) 764 */ 765 #define actualquirks phys.header.status[0] 766 #define host_status phys.header.status[1] 767 #define s_status phys.header.status[2] 768 #define parity_status phys.header.status[3] 769 770 /* 771 ** Last four bytes (script) 772 */ 773 #define xerr_st header.status[4] /* MUST be ==0 mod 4 */ 774 #define sync_st header.status[5] /* MUST be ==1 mod 4 */ 775 #define nego_st header.status[6] 776 #define wide_st header.status[7] /* MUST be ==3 mod 4 */ 777 778 /* 779 ** Last four bytes (host) 780 */ 781 #define xerr_status phys.xerr_st 782 #define sync_status phys.sync_st 783 #define nego_status phys.nego_st 784 #define wide_status phys.wide_st 785 786 /*========================================================== 787 ** 788 ** Declaration of structs: Data structure block 789 ** 790 **========================================================== 791 ** 792 ** During execution of a nccb by the script processor, 793 ** the DSA (data structure address) register points 794 ** to this substructure of the nccb. 795 ** This substructure contains the header with 796 ** the script-processor-changable data and 797 ** data blocks for the indirect move commands. 798 ** 799 **---------------------------------------------------------- 800 */ 801 802 struct dsb { 803 804 /* 805 ** Header. 806 ** Has to be the first entry, 807 ** because it's jumped to by the 808 ** script processor 809 */ 810 811 struct head header; 812 813 /* 814 ** Table data for Script 815 */ 816 817 struct scr_tblsel select; 818 struct scr_tblmove smsg ; 819 struct scr_tblmove smsg2 ; 820 struct scr_tblmove cmd ; 821 struct scr_tblmove scmd ; 822 struct scr_tblmove sense ; 823 struct scr_tblmove data [MAX_SCATTER]; 824 }; 825 826 /*========================================================== 827 ** 828 ** Declaration of structs: Command control block. 829 ** 830 **========================================================== 831 ** 832 ** During execution of a nccb by the script processor, 833 ** the DSA (data structure address) register points 834 ** to this substructure of the nccb. 835 ** This substructure contains the header with 836 ** the script-processor-changable data and then 837 ** data blocks for the indirect move commands. 838 ** 839 **---------------------------------------------------------- 840 */ 841 842 843 struct nccb { 844 /* 845 ** This filler ensures that the global header is 846 ** cache line size aligned. 847 */ 848 ncrcmd filler[4]; 849 850 /* 851 ** during reselection the ncr jumps to this point. 852 ** If a "SIMPLE_TAG" message was received, 853 ** then SFBR is set to the tag. 854 ** else SFBR is set to 0 855 ** If looking for another tag, jump to the next nccb. 856 ** 857 ** JUMP IF (SFBR != #TAG#) 858 ** @(next nccb of this lun) 859 */ 860 861 struct link jump_nccb; 862 863 /* 864 ** After execution of this call, the return address 865 ** (in the TEMP register) points to the following 866 ** data structure block. 867 ** So copy it to the DSA register, and start 868 ** processing of this data structure. 869 ** 870 ** CALL 871 ** <RESEL_TMP> 872 */ 873 874 struct link call_tmp; 875 876 /* 877 ** This is the data structure which is 878 ** to be executed by the script processor. 879 */ 880 881 struct dsb phys; 882 883 /* 884 ** If a data transfer phase is terminated too early 885 ** (after reception of a message (i.e. DISCONNECT)), 886 ** we have to prepare a mini script to transfer 887 ** the rest of the data. 888 */ 889 890 ncrcmd patch[8]; 891 892 /* 893 ** The general SCSI driver provides a 894 ** pointer to a control block. 895 */ 896 897 union ccb *ccb; 898 899 /* 900 ** We prepare a message to be sent after selection, 901 ** and a second one to be sent after getcc selection. 902 ** Contents are IDENTIFY and SIMPLE_TAG. 903 ** While negotiating sync or wide transfer, 904 ** a SDTM or WDTM message is appended. 905 */ 906 907 u_char scsi_smsg [8]; 908 u_char scsi_smsg2[8]; 909 910 /* 911 ** Lock this nccb. 912 ** Flag is used while looking for a free nccb. 913 */ 914 915 u_long magic; 916 917 /* 918 ** Physical address of this instance of nccb 919 */ 920 921 u_long p_nccb; 922 923 /* 924 ** Completion time out for this job. 925 ** It's set to time of start + allowed number of seconds. 926 */ 927 928 time_t tlimit; 929 930 /* 931 ** All nccbs of one hostadapter are chained. 932 */ 933 934 nccb_p link_nccb; 935 936 /* 937 ** All nccbs of one target/lun are chained. 938 */ 939 940 nccb_p next_nccb; 941 942 /* 943 ** Sense command 944 */ 945 946 u_char sensecmd[6]; 947 948 /* 949 ** Tag for this transfer. 950 ** It's patched into jump_nccb. 951 ** If it's not zero, a SIMPLE_TAG 952 ** message is included in smsg. 953 */ 954 955 u_char tag; 956 }; 957 958 #define CCB_PHYS(cp,lbl) (cp->p_nccb + offsetof(struct nccb, lbl)) 959 960 /*========================================================== 961 ** 962 ** Declaration of structs: NCR device descriptor 963 ** 964 **========================================================== 965 */ 966 967 struct ncb { 968 /* 969 ** The global header. 970 ** Accessible to both the host and the 971 ** script-processor. 972 ** We assume it is cache line size aligned. 973 */ 974 struct head header; 975 976 int unit; 977 978 /*----------------------------------------------- 979 ** Scripts .. 980 **----------------------------------------------- 981 ** 982 ** During reselection the ncr jumps to this point. 983 ** The SFBR register is loaded with the encoded target id. 984 ** 985 ** Jump to the first target. 986 ** 987 ** JUMP 988 ** @(next tcb) 989 */ 990 struct link jump_tcb; 991 992 /*----------------------------------------------- 993 ** Configuration .. 994 **----------------------------------------------- 995 ** 996 ** virtual and physical addresses 997 ** of the 53c810 chip. 998 */ 999 int reg_rid; 1000 struct resource *reg_res; 1001 bus_space_tag_t bst; 1002 bus_space_handle_t bsh; 1003 1004 int sram_rid; 1005 struct resource *sram_res; 1006 bus_space_tag_t bst2; 1007 bus_space_handle_t bsh2; 1008 1009 struct resource *irq_res; 1010 void *irq_handle; 1011 1012 /* 1013 ** Scripts instance virtual address. 1014 */ 1015 struct script *script; 1016 struct scripth *scripth; 1017 1018 /* 1019 ** Scripts instance physical address. 1020 */ 1021 u_long p_script; 1022 u_long p_scripth; 1023 1024 /* 1025 ** The SCSI address of the host adapter. 1026 */ 1027 u_char myaddr; 1028 1029 /* 1030 ** timing parameters 1031 */ 1032 u_char minsync; /* Minimum sync period factor */ 1033 u_char maxsync; /* Maximum sync period factor */ 1034 u_char maxoffs; /* Max scsi offset */ 1035 u_char clock_divn; /* Number of clock divisors */ 1036 u_long clock_khz; /* SCSI clock frequency in KHz */ 1037 u_long features; /* Chip features map */ 1038 u_char multiplier; /* Clock multiplier (1,2,4) */ 1039 1040 u_char maxburst; /* log base 2 of dwords burst */ 1041 1042 /* 1043 ** BIOS supplied PCI bus options 1044 */ 1045 u_char rv_scntl3; 1046 u_char rv_dcntl; 1047 u_char rv_dmode; 1048 u_char rv_ctest3; 1049 u_char rv_ctest4; 1050 u_char rv_ctest5; 1051 u_char rv_gpcntl; 1052 u_char rv_stest2; 1053 1054 /*----------------------------------------------- 1055 ** CAM SIM information for this instance 1056 **----------------------------------------------- 1057 */ 1058 1059 struct cam_sim *sim; 1060 struct cam_path *path; 1061 1062 /*----------------------------------------------- 1063 ** Job control 1064 **----------------------------------------------- 1065 ** 1066 ** Commands from user 1067 */ 1068 struct usrcmd user; 1069 1070 /* 1071 ** Target data 1072 */ 1073 struct tcb target[MAX_TARGET]; 1074 1075 /* 1076 ** Start queue. 1077 */ 1078 u_int32_t squeue [MAX_START]; 1079 u_short squeueput; 1080 1081 /* 1082 ** Timeout handler 1083 */ 1084 time_t heartbeat; 1085 u_short ticks; 1086 u_short latetime; 1087 time_t lasttime; 1088 struct callout timeout_ch; 1089 1090 /*----------------------------------------------- 1091 ** Debug and profiling 1092 **----------------------------------------------- 1093 ** 1094 ** register dump 1095 */ 1096 struct ncr_reg regdump; 1097 time_t regtime; 1098 1099 /* 1100 ** Profiling data 1101 */ 1102 struct profile profile; 1103 u_long disc_phys; 1104 u_long disc_ref; 1105 1106 /* 1107 ** Head of list of all nccbs for this controller. 1108 */ 1109 nccb_p link_nccb; 1110 1111 /* 1112 ** message buffers. 1113 ** Should be longword aligned, 1114 ** because they're written with a 1115 ** COPY script command. 1116 */ 1117 u_char msgout[8]; 1118 u_char msgin [8]; 1119 u_int32_t lastmsg; 1120 1121 /* 1122 ** Buffer for STATUS_IN phase. 1123 */ 1124 u_char scratch; 1125 1126 /* 1127 ** controller chip dependent maximal transfer width. 1128 */ 1129 u_char maxwide; 1130 1131 #ifdef NCR_IOMAPPED 1132 /* 1133 ** address of the ncr control registers in io space 1134 */ 1135 pci_port_t port; 1136 #endif 1137 }; 1138 1139 #define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl)) 1140 #define NCB_SCRIPTH_PHYS(np,lbl) (np->p_scripth + offsetof (struct scripth,lbl)) 1141 1142 /*========================================================== 1143 ** 1144 ** 1145 ** Script for NCR-Processor. 1146 ** 1147 ** Use ncr_script_fill() to create the variable parts. 1148 ** Use ncr_script_copy_and_bind() to make a copy and 1149 ** bind to physical addresses. 1150 ** 1151 ** 1152 **========================================================== 1153 ** 1154 ** We have to know the offsets of all labels before 1155 ** we reach them (for forward jumps). 1156 ** Therefore we declare a struct here. 1157 ** If you make changes inside the script, 1158 ** DONT FORGET TO CHANGE THE LENGTHS HERE! 1159 ** 1160 **---------------------------------------------------------- 1161 */ 1162 1163 /* 1164 ** Script fragments which are loaded into the on-board RAM 1165 ** of 825A, 875 and 895 chips. 1166 */ 1167 struct script { 1168 ncrcmd start [ 7]; 1169 ncrcmd start0 [ 2]; 1170 ncrcmd start1 [ 3]; 1171 ncrcmd startpos [ 1]; 1172 ncrcmd trysel [ 8]; 1173 ncrcmd skip [ 8]; 1174 ncrcmd skip2 [ 3]; 1175 ncrcmd idle [ 2]; 1176 ncrcmd select [ 18]; 1177 ncrcmd prepare [ 4]; 1178 ncrcmd loadpos [ 14]; 1179 ncrcmd prepare2 [ 24]; 1180 ncrcmd setmsg [ 5]; 1181 ncrcmd clrack [ 2]; 1182 ncrcmd dispatch [ 33]; 1183 ncrcmd no_data [ 17]; 1184 ncrcmd checkatn [ 10]; 1185 ncrcmd command [ 15]; 1186 ncrcmd status [ 27]; 1187 ncrcmd msg_in [ 26]; 1188 ncrcmd msg_bad [ 6]; 1189 ncrcmd complete [ 13]; 1190 ncrcmd cleanup [ 12]; 1191 ncrcmd cleanup0 [ 9]; 1192 ncrcmd signal [ 12]; 1193 ncrcmd save_dp [ 5]; 1194 ncrcmd restore_dp [ 5]; 1195 ncrcmd disconnect [ 12]; 1196 ncrcmd disconnect0 [ 5]; 1197 ncrcmd disconnect1 [ 23]; 1198 ncrcmd msg_out [ 9]; 1199 ncrcmd msg_out_done [ 7]; 1200 ncrcmd badgetcc [ 6]; 1201 ncrcmd reselect [ 8]; 1202 ncrcmd reselect1 [ 8]; 1203 ncrcmd reselect2 [ 8]; 1204 ncrcmd resel_tmp [ 5]; 1205 ncrcmd resel_lun [ 18]; 1206 ncrcmd resel_tag [ 24]; 1207 ncrcmd data_in [MAX_SCATTER * 4 + 7]; 1208 ncrcmd data_out [MAX_SCATTER * 4 + 7]; 1209 }; 1210 1211 /* 1212 ** Script fragments which stay in main memory for all chips. 1213 */ 1214 struct scripth { 1215 ncrcmd tryloop [MAX_START*5+2]; 1216 ncrcmd msg_parity [ 6]; 1217 ncrcmd msg_reject [ 8]; 1218 ncrcmd msg_ign_residue [ 32]; 1219 ncrcmd msg_extended [ 18]; 1220 ncrcmd msg_ext_2 [ 18]; 1221 ncrcmd msg_wdtr [ 27]; 1222 ncrcmd msg_ext_3 [ 18]; 1223 ncrcmd msg_sdtr [ 27]; 1224 ncrcmd msg_out_abort [ 10]; 1225 ncrcmd getcc [ 4]; 1226 ncrcmd getcc1 [ 5]; 1227 #ifdef NCR_GETCC_WITHMSG 1228 ncrcmd getcc2 [ 29]; 1229 #else 1230 ncrcmd getcc2 [ 14]; 1231 #endif 1232 ncrcmd getcc3 [ 6]; 1233 ncrcmd aborttag [ 4]; 1234 ncrcmd abort [ 22]; 1235 ncrcmd snooptest [ 9]; 1236 ncrcmd snoopend [ 2]; 1237 }; 1238 1239 /*========================================================== 1240 ** 1241 ** 1242 ** Function headers. 1243 ** 1244 ** 1245 **========================================================== 1246 */ 1247 1248 #ifdef _KERNEL 1249 static nccb_p ncr_alloc_nccb (ncb_p np, u_long target, u_long lun); 1250 static void ncr_complete (ncb_p np, nccb_p cp); 1251 static int ncr_delta (int * from, int * to); 1252 static void ncr_exception (ncb_p np); 1253 static void ncr_free_nccb (ncb_p np, nccb_p cp); 1254 static void ncr_freeze_devq (ncb_p np, struct cam_path *path); 1255 static void ncr_selectclock (ncb_p np, u_char scntl3); 1256 static void ncr_getclock (ncb_p np, u_char multiplier); 1257 static nccb_p ncr_get_nccb (ncb_p np, u_long t,u_long l); 1258 #if 0 1259 static u_int32_t ncr_info (int unit); 1260 #endif 1261 static void ncr_init (ncb_p np, char * msg, u_long code); 1262 static void ncr_intr (void *vnp); 1263 static void ncr_int_ma (ncb_p np, u_char dstat); 1264 static void ncr_int_sir (ncb_p np); 1265 static void ncr_int_sto (ncb_p np); 1266 #if 0 1267 static void ncr_min_phys (struct buf *bp); 1268 #endif 1269 static void ncr_poll (struct cam_sim *sim); 1270 static void ncb_profile (ncb_p np, nccb_p cp); 1271 static void ncr_script_copy_and_bind 1272 (ncb_p np, ncrcmd *src, ncrcmd *dst, int len); 1273 static void ncr_script_fill (struct script * scr, struct scripth *scrh); 1274 static int ncr_scatter (struct dsb* phys, vm_offset_t vaddr, 1275 vm_size_t datalen); 1276 static void ncr_getsync (ncb_p np, u_char sfac, u_char *fakp, 1277 u_char *scntl3p); 1278 static void ncr_setsync (ncb_p np, nccb_p cp,u_char scntl3,u_char sxfer, 1279 u_char period); 1280 static void ncr_setwide (ncb_p np, nccb_p cp, u_char wide, u_char ack); 1281 static int ncr_show_msg (u_char * msg); 1282 static int ncr_snooptest (ncb_p np); 1283 static void ncr_action (struct cam_sim *sim, union ccb *ccb); 1284 static void ncr_timeout (void *arg); 1285 static void ncr_wakeup (ncb_p np, u_long code); 1286 1287 static int ncr_probe (device_t dev); 1288 static int ncr_attach (device_t dev); 1289 1290 #endif /* _KERNEL */ 1291 1292 /*========================================================== 1293 ** 1294 ** 1295 ** Global static data. 1296 ** 1297 ** 1298 **========================================================== 1299 */ 1300 1301 1302 /* 1303 * $FreeBSD: src/sys/pci/ncr.c,v 1.155.2.3 2001/03/05 13:09:10 obrien Exp $ 1304 */ 1305 static const u_long ncr_version = NCR_VERSION * 11 1306 + (u_long) sizeof (struct ncb) * 7 1307 + (u_long) sizeof (struct nccb) * 5 1308 + (u_long) sizeof (struct lcb) * 3 1309 + (u_long) sizeof (struct tcb) * 2; 1310 1311 #ifdef _KERNEL 1312 1313 static int ncr_debug = SCSI_NCR_DEBUG; 1314 SYSCTL_INT(_debug, OID_AUTO, ncr_debug, CTLFLAG_RW, &ncr_debug, 0, 1315 "Driver debug flags"); 1316 1317 static int ncr_cache; /* to be aligned _NOT_ static */ 1318 1319 /*========================================================== 1320 ** 1321 ** 1322 ** Global static data: auto configure 1323 ** 1324 ** 1325 **========================================================== 1326 */ 1327 1328 #define NCR_810_ID (0x00011000ul) 1329 #define NCR_815_ID (0x00041000ul) 1330 #define NCR_820_ID (0x00021000ul) 1331 #define NCR_825_ID (0x00031000ul) 1332 #define NCR_860_ID (0x00061000ul) 1333 #define NCR_875_ID (0x000f1000ul) 1334 #define NCR_875_ID2 (0x008f1000ul) 1335 #define NCR_885_ID (0x000d1000ul) 1336 #define NCR_895_ID (0x000c1000ul) 1337 #define NCR_896_ID (0x000b1000ul) 1338 #define NCR_895A_ID (0x00121000ul) 1339 #define NCR_1510D_ID (0x000a1000ul) 1340 1341 1342 static char *ncr_name (ncb_p np) 1343 { 1344 static char name[10]; 1345 ksnprintf(name, sizeof(name), "ncr%d", np->unit); 1346 return (name); 1347 } 1348 1349 /*========================================================== 1350 ** 1351 ** 1352 ** Scripts for NCR-Processor. 1353 ** 1354 ** Use ncr_script_bind for binding to physical addresses. 1355 ** 1356 ** 1357 **========================================================== 1358 ** 1359 ** NADDR generates a reference to a field of the controller data. 1360 ** PADDR generates a reference to another part of the script. 1361 ** RADDR generates a reference to a script processor register. 1362 ** FADDR generates a reference to a script processor register 1363 ** with offset. 1364 ** 1365 **---------------------------------------------------------- 1366 */ 1367 1368 #define RELOC_SOFTC 0x40000000 1369 #define RELOC_LABEL 0x50000000 1370 #define RELOC_REGISTER 0x60000000 1371 #define RELOC_KVAR 0x70000000 1372 #define RELOC_LABELH 0x80000000 1373 #define RELOC_MASK 0xf0000000 1374 1375 #define NADDR(label) (RELOC_SOFTC | offsetof(struct ncb, label)) 1376 #define PADDR(label) (RELOC_LABEL | offsetof(struct script, label)) 1377 #define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label)) 1378 #define RADDR(label) (RELOC_REGISTER | REG(label)) 1379 #define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs))) 1380 #define KVAR(which) (RELOC_KVAR | (which)) 1381 1382 #define KVAR_SECOND (0) 1383 #define KVAR_TICKS (1) 1384 #define KVAR_NCR_CACHE (2) 1385 1386 #define SCRIPT_KVAR_FIRST (0) 1387 #define SCRIPT_KVAR_LAST (3) 1388 1389 /* 1390 * Kernel variables referenced in the scripts. 1391 * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY. 1392 */ 1393 static void *script_kvars[] = 1394 { &time_uptime, &ticks, &ncr_cache }; 1395 1396 static struct script script0 = { 1397 /*--------------------------< START >-----------------------*/ { 1398 /* 1399 ** Claim to be still alive ... 1400 */ 1401 SCR_COPY (sizeof (((struct ncb *)0)->heartbeat)), 1402 KVAR (KVAR_SECOND), 1403 NADDR (heartbeat), 1404 /* 1405 ** Make data structure address invalid. 1406 ** clear SIGP. 1407 */ 1408 SCR_LOAD_REG (dsa, 0xff), 1409 0, 1410 SCR_FROM_REG (ctest2), 1411 0, 1412 }/*-------------------------< START0 >----------------------*/,{ 1413 /* 1414 ** Hook for interrupted GetConditionCode. 1415 ** Will be patched to ... IFTRUE by 1416 ** the interrupt handler. 1417 */ 1418 SCR_INT ^ IFFALSE (0), 1419 SIR_SENSE_RESTART, 1420 1421 }/*-------------------------< START1 >----------------------*/,{ 1422 /* 1423 ** Hook for stalled start queue. 1424 ** Will be patched to IFTRUE by the interrupt handler. 1425 */ 1426 SCR_INT ^ IFFALSE (0), 1427 SIR_STALL_RESTART, 1428 /* 1429 ** Then jump to a certain point in tryloop. 1430 ** Due to the lack of indirect addressing the code 1431 ** is self modifying here. 1432 */ 1433 SCR_JUMP, 1434 }/*-------------------------< STARTPOS >--------------------*/,{ 1435 PADDRH(tryloop), 1436 1437 }/*-------------------------< TRYSEL >----------------------*/,{ 1438 /* 1439 ** Now: 1440 ** DSA: Address of a Data Structure 1441 ** or Address of the IDLE-Label. 1442 ** 1443 ** TEMP: Address of a script, which tries to 1444 ** start the NEXT entry. 1445 ** 1446 ** Save the TEMP register into the SCRATCHA register. 1447 ** Then copy the DSA to TEMP and RETURN. 1448 ** This is kind of an indirect jump. 1449 ** (The script processor has NO stack, so the 1450 ** CALL is actually a jump and link, and the 1451 ** RETURN is an indirect jump.) 1452 ** 1453 ** If the slot was empty, DSA contains the address 1454 ** of the IDLE part of this script. The processor 1455 ** jumps to IDLE and waits for a reselect. 1456 ** It will wake up and try the same slot again 1457 ** after the SIGP bit becomes set by the host. 1458 ** 1459 ** If the slot was not empty, DSA contains 1460 ** the address of the phys-part of a nccb. 1461 ** The processor jumps to this address. 1462 ** phys starts with head, 1463 ** head starts with launch, 1464 ** so actually the processor jumps to 1465 ** the lauch part. 1466 ** If the entry is scheduled for execution, 1467 ** then launch contains a jump to SELECT. 1468 ** If it's not scheduled, it contains a jump to IDLE. 1469 */ 1470 SCR_COPY (4), 1471 RADDR (temp), 1472 RADDR (scratcha), 1473 SCR_COPY (4), 1474 RADDR (dsa), 1475 RADDR (temp), 1476 SCR_RETURN, 1477 0 1478 1479 }/*-------------------------< SKIP >------------------------*/,{ 1480 /* 1481 ** This entry has been canceled. 1482 ** Next time use the next slot. 1483 */ 1484 SCR_COPY (4), 1485 RADDR (scratcha), 1486 PADDR (startpos), 1487 /* 1488 ** patch the launch field. 1489 ** should look like an idle process. 1490 */ 1491 SCR_COPY_F (4), 1492 RADDR (dsa), 1493 PADDR (skip2), 1494 SCR_COPY (8), 1495 PADDR (idle), 1496 }/*-------------------------< SKIP2 >-----------------------*/,{ 1497 0, 1498 SCR_JUMP, 1499 PADDR(start), 1500 }/*-------------------------< IDLE >------------------------*/,{ 1501 /* 1502 ** Nothing to do? 1503 ** Wait for reselect. 1504 */ 1505 SCR_JUMP, 1506 PADDR(reselect), 1507 1508 }/*-------------------------< SELECT >----------------------*/,{ 1509 /* 1510 ** DSA contains the address of a scheduled 1511 ** data structure. 1512 ** 1513 ** SCRATCHA contains the address of the script, 1514 ** which starts the next entry. 1515 ** 1516 ** Set Initiator mode. 1517 ** 1518 ** (Target mode is left as an exercise for the reader) 1519 */ 1520 1521 SCR_CLR (SCR_TRG), 1522 0, 1523 SCR_LOAD_REG (HS_REG, 0xff), 1524 0, 1525 1526 /* 1527 ** And try to select this target. 1528 */ 1529 SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select), 1530 PADDR (reselect), 1531 1532 /* 1533 ** Now there are 4 possibilities: 1534 ** 1535 ** (1) The ncr looses arbitration. 1536 ** This is ok, because it will try again, 1537 ** when the bus becomes idle. 1538 ** (But beware of the timeout function!) 1539 ** 1540 ** (2) The ncr is reselected. 1541 ** Then the script processor takes the jump 1542 ** to the RESELECT label. 1543 ** 1544 ** (3) The ncr completes the selection. 1545 ** Then it will execute the next statement. 1546 ** 1547 ** (4) There is a selection timeout. 1548 ** Then the ncr should interrupt the host and stop. 1549 ** Unfortunately, it seems to continue execution 1550 ** of the script. But it will fail with an 1551 ** IID-interrupt on the next WHEN. 1552 */ 1553 1554 SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_IN)), 1555 0, 1556 1557 /* 1558 ** Send the IDENTIFY and SIMPLE_TAG messages 1559 ** (and the MSG_EXT_SDTR message) 1560 */ 1561 SCR_MOVE_TBL ^ SCR_MSG_OUT, 1562 offsetof (struct dsb, smsg), 1563 #ifdef undef /* XXX better fail than try to deal with this ... */ 1564 SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_OUT)), 1565 -16, 1566 #endif 1567 SCR_CLR (SCR_ATN), 1568 0, 1569 SCR_COPY (1), 1570 RADDR (sfbr), 1571 NADDR (lastmsg), 1572 /* 1573 ** Selection complete. 1574 ** Next time use the next slot. 1575 */ 1576 SCR_COPY (4), 1577 RADDR (scratcha), 1578 PADDR (startpos), 1579 }/*-------------------------< PREPARE >----------------------*/,{ 1580 /* 1581 ** The ncr doesn't have an indirect load 1582 ** or store command. So we have to 1583 ** copy part of the control block to a 1584 ** fixed place, where we can access it. 1585 ** 1586 ** We patch the address part of a 1587 ** COPY command with the DSA-register. 1588 */ 1589 SCR_COPY_F (4), 1590 RADDR (dsa), 1591 PADDR (loadpos), 1592 /* 1593 ** then we do the actual copy. 1594 */ 1595 SCR_COPY (sizeof (struct head)), 1596 /* 1597 ** continued after the next label ... 1598 */ 1599 1600 }/*-------------------------< LOADPOS >---------------------*/,{ 1601 0, 1602 NADDR (header), 1603 /* 1604 ** Mark this nccb as not scheduled. 1605 */ 1606 SCR_COPY (8), 1607 PADDR (idle), 1608 NADDR (header.launch), 1609 /* 1610 ** Set a time stamp for this selection 1611 */ 1612 SCR_COPY (sizeof (ticks)), 1613 KVAR (KVAR_TICKS), 1614 NADDR (header.stamp.select), 1615 /* 1616 ** load the savep (saved pointer) into 1617 ** the TEMP register (actual pointer) 1618 */ 1619 SCR_COPY (4), 1620 NADDR (header.savep), 1621 RADDR (temp), 1622 /* 1623 ** Initialize the status registers 1624 */ 1625 SCR_COPY (4), 1626 NADDR (header.status), 1627 RADDR (scr0), 1628 1629 }/*-------------------------< PREPARE2 >---------------------*/,{ 1630 /* 1631 ** Load the synchronous mode register 1632 */ 1633 SCR_COPY (1), 1634 NADDR (sync_st), 1635 RADDR (sxfer), 1636 /* 1637 ** Load the wide mode and timing register 1638 */ 1639 SCR_COPY (1), 1640 NADDR (wide_st), 1641 RADDR (scntl3), 1642 /* 1643 ** Initialize the msgout buffer with a NOOP message. 1644 */ 1645 SCR_LOAD_REG (scratcha, MSG_NOOP), 1646 0, 1647 SCR_COPY (1), 1648 RADDR (scratcha), 1649 NADDR (msgout), 1650 SCR_COPY (1), 1651 RADDR (scratcha), 1652 NADDR (msgin), 1653 /* 1654 ** Message in phase ? 1655 */ 1656 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 1657 PADDR (dispatch), 1658 /* 1659 ** Extended or reject message ? 1660 */ 1661 SCR_FROM_REG (sbdl), 1662 0, 1663 SCR_JUMP ^ IFTRUE (DATA (MSG_EXTENDED)), 1664 PADDR (msg_in), 1665 SCR_JUMP ^ IFTRUE (DATA (MSG_MESSAGE_REJECT)), 1666 PADDRH (msg_reject), 1667 /* 1668 ** normal processing 1669 */ 1670 SCR_JUMP, 1671 PADDR (dispatch), 1672 }/*-------------------------< SETMSG >----------------------*/,{ 1673 SCR_COPY (1), 1674 RADDR (scratcha), 1675 NADDR (msgout), 1676 SCR_SET (SCR_ATN), 1677 0, 1678 }/*-------------------------< CLRACK >----------------------*/,{ 1679 /* 1680 ** Terminate possible pending message phase. 1681 */ 1682 SCR_CLR (SCR_ACK), 1683 0, 1684 1685 }/*-----------------------< DISPATCH >----------------------*/,{ 1686 SCR_FROM_REG (HS_REG), 1687 0, 1688 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 1689 SIR_NEGO_FAILED, 1690 /* 1691 ** remove bogus output signals 1692 */ 1693 SCR_REG_REG (socl, SCR_AND, CACK|CATN), 1694 0, 1695 SCR_RETURN ^ IFTRUE (WHEN (SCR_DATA_OUT)), 1696 0, 1697 SCR_RETURN ^ IFTRUE (IF (SCR_DATA_IN)), 1698 0, 1699 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), 1700 PADDR (msg_out), 1701 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN)), 1702 PADDR (msg_in), 1703 SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), 1704 PADDR (command), 1705 SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), 1706 PADDR (status), 1707 /* 1708 ** Discard one illegal phase byte, if required. 1709 */ 1710 SCR_LOAD_REG (scratcha, XE_BAD_PHASE), 1711 0, 1712 SCR_COPY (1), 1713 RADDR (scratcha), 1714 NADDR (xerr_st), 1715 SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_OUT)), 1716 8, 1717 SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, 1718 NADDR (scratch), 1719 SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_IN)), 1720 8, 1721 SCR_MOVE_ABS (1) ^ SCR_ILG_IN, 1722 NADDR (scratch), 1723 SCR_JUMP, 1724 PADDR (dispatch), 1725 1726 }/*-------------------------< NO_DATA >--------------------*/,{ 1727 /* 1728 ** The target wants to tranfer too much data 1729 ** or in the wrong direction. 1730 ** Remember that in extended error. 1731 */ 1732 SCR_LOAD_REG (scratcha, XE_EXTRA_DATA), 1733 0, 1734 SCR_COPY (1), 1735 RADDR (scratcha), 1736 NADDR (xerr_st), 1737 /* 1738 ** Discard one data byte, if required. 1739 */ 1740 SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), 1741 8, 1742 SCR_MOVE_ABS (1) ^ SCR_DATA_OUT, 1743 NADDR (scratch), 1744 SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)), 1745 8, 1746 SCR_MOVE_ABS (1) ^ SCR_DATA_IN, 1747 NADDR (scratch), 1748 /* 1749 ** .. and repeat as required. 1750 */ 1751 SCR_CALL, 1752 PADDR (dispatch), 1753 SCR_JUMP, 1754 PADDR (no_data), 1755 }/*-------------------------< CHECKATN >--------------------*/,{ 1756 /* 1757 ** If AAP (bit 1 of scntl0 register) is set 1758 ** and a parity error is detected, 1759 ** the script processor asserts ATN. 1760 ** 1761 ** The target should switch to a MSG_OUT phase 1762 ** to get the message. 1763 */ 1764 SCR_FROM_REG (socl), 1765 0, 1766 SCR_JUMP ^ IFFALSE (MASK (CATN, CATN)), 1767 PADDR (dispatch), 1768 /* 1769 ** count it 1770 */ 1771 SCR_REG_REG (PS_REG, SCR_ADD, 1), 1772 0, 1773 /* 1774 ** Prepare a MSG_INITIATOR_DET_ERR message 1775 ** (initiator detected error). 1776 ** The target should retry the transfer. 1777 */ 1778 SCR_LOAD_REG (scratcha, MSG_INITIATOR_DET_ERR), 1779 0, 1780 SCR_JUMP, 1781 PADDR (setmsg), 1782 1783 }/*-------------------------< COMMAND >--------------------*/,{ 1784 /* 1785 ** If this is not a GETCC transfer ... 1786 */ 1787 SCR_FROM_REG (SS_REG), 1788 0, 1789 /*<<<*/ SCR_JUMPR ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)), 1790 28, 1791 /* 1792 ** ... set a timestamp ... 1793 */ 1794 SCR_COPY (sizeof (ticks)), 1795 KVAR (KVAR_TICKS), 1796 NADDR (header.stamp.command), 1797 /* 1798 ** ... and send the command 1799 */ 1800 SCR_MOVE_TBL ^ SCR_COMMAND, 1801 offsetof (struct dsb, cmd), 1802 SCR_JUMP, 1803 PADDR (dispatch), 1804 /* 1805 ** Send the GETCC command 1806 */ 1807 /*>>>*/ SCR_MOVE_TBL ^ SCR_COMMAND, 1808 offsetof (struct dsb, scmd), 1809 SCR_JUMP, 1810 PADDR (dispatch), 1811 1812 }/*-------------------------< STATUS >--------------------*/,{ 1813 /* 1814 ** set the timestamp. 1815 */ 1816 SCR_COPY (sizeof (ticks)), 1817 KVAR (KVAR_TICKS), 1818 NADDR (header.stamp.status), 1819 /* 1820 ** If this is a GETCC transfer, 1821 */ 1822 SCR_FROM_REG (SS_REG), 1823 0, 1824 /*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (SCSI_STATUS_CHECK_COND)), 1825 40, 1826 /* 1827 ** get the status 1828 */ 1829 SCR_MOVE_ABS (1) ^ SCR_STATUS, 1830 NADDR (scratch), 1831 /* 1832 ** Save status to scsi_status. 1833 ** Mark as complete. 1834 ** And wait for disconnect. 1835 */ 1836 SCR_TO_REG (SS_REG), 1837 0, 1838 SCR_REG_REG (SS_REG, SCR_OR, SCSI_STATUS_SENSE), 1839 0, 1840 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 1841 0, 1842 SCR_JUMP, 1843 PADDR (checkatn), 1844 /* 1845 ** If it was no GETCC transfer, 1846 ** save the status to scsi_status. 1847 */ 1848 /*>>>*/ SCR_MOVE_ABS (1) ^ SCR_STATUS, 1849 NADDR (scratch), 1850 SCR_TO_REG (SS_REG), 1851 0, 1852 /* 1853 ** if it was no check condition ... 1854 */ 1855 SCR_JUMP ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)), 1856 PADDR (checkatn), 1857 /* 1858 ** ... mark as complete. 1859 */ 1860 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 1861 0, 1862 SCR_JUMP, 1863 PADDR (checkatn), 1864 1865 }/*-------------------------< MSG_IN >--------------------*/,{ 1866 /* 1867 ** Get the first byte of the message 1868 ** and save it to SCRATCHA. 1869 ** 1870 ** The script processor doesn't negate the 1871 ** ACK signal after this transfer. 1872 */ 1873 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 1874 NADDR (msgin[0]), 1875 /* 1876 ** Check for message parity error. 1877 */ 1878 SCR_TO_REG (scratcha), 1879 0, 1880 SCR_FROM_REG (socl), 1881 0, 1882 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 1883 PADDRH (msg_parity), 1884 SCR_FROM_REG (scratcha), 1885 0, 1886 /* 1887 ** Parity was ok, handle this message. 1888 */ 1889 SCR_JUMP ^ IFTRUE (DATA (MSG_CMDCOMPLETE)), 1890 PADDR (complete), 1891 SCR_JUMP ^ IFTRUE (DATA (MSG_SAVEDATAPOINTER)), 1892 PADDR (save_dp), 1893 SCR_JUMP ^ IFTRUE (DATA (MSG_RESTOREPOINTERS)), 1894 PADDR (restore_dp), 1895 SCR_JUMP ^ IFTRUE (DATA (MSG_DISCONNECT)), 1896 PADDR (disconnect), 1897 SCR_JUMP ^ IFTRUE (DATA (MSG_EXTENDED)), 1898 PADDRH (msg_extended), 1899 SCR_JUMP ^ IFTRUE (DATA (MSG_NOOP)), 1900 PADDR (clrack), 1901 SCR_JUMP ^ IFTRUE (DATA (MSG_MESSAGE_REJECT)), 1902 PADDRH (msg_reject), 1903 SCR_JUMP ^ IFTRUE (DATA (MSG_IGN_WIDE_RESIDUE)), 1904 PADDRH (msg_ign_residue), 1905 /* 1906 ** Rest of the messages left as 1907 ** an exercise ... 1908 ** 1909 ** Unimplemented messages: 1910 ** fall through to MSG_BAD. 1911 */ 1912 }/*-------------------------< MSG_BAD >------------------*/,{ 1913 /* 1914 ** unimplemented message - reject it. 1915 */ 1916 SCR_INT, 1917 SIR_REJECT_SENT, 1918 SCR_LOAD_REG (scratcha, MSG_MESSAGE_REJECT), 1919 0, 1920 SCR_JUMP, 1921 PADDR (setmsg), 1922 1923 }/*-------------------------< COMPLETE >-----------------*/,{ 1924 /* 1925 ** Complete message. 1926 ** 1927 ** If it's not the get condition code, 1928 ** copy TEMP register to LASTP in header. 1929 */ 1930 SCR_FROM_REG (SS_REG), 1931 0, 1932 /*<<<*/ SCR_JUMPR ^ IFTRUE (MASK (SCSI_STATUS_SENSE, SCSI_STATUS_SENSE)), 1933 12, 1934 SCR_COPY (4), 1935 RADDR (temp), 1936 NADDR (header.lastp), 1937 /*>>>*/ /* 1938 ** When we terminate the cycle by clearing ACK, 1939 ** the target may disconnect immediately. 1940 ** 1941 ** We don't want to be told of an 1942 ** "unexpected disconnect", 1943 ** so we disable this feature. 1944 */ 1945 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 1946 0, 1947 /* 1948 ** Terminate cycle ... 1949 */ 1950 SCR_CLR (SCR_ACK|SCR_ATN), 1951 0, 1952 /* 1953 ** ... and wait for the disconnect. 1954 */ 1955 SCR_WAIT_DISC, 1956 0, 1957 }/*-------------------------< CLEANUP >-------------------*/,{ 1958 /* 1959 ** dsa: Pointer to nccb 1960 ** or xxxxxxFF (no nccb) 1961 ** 1962 ** HS_REG: Host-Status (<>0!) 1963 */ 1964 SCR_FROM_REG (dsa), 1965 0, 1966 SCR_JUMP ^ IFTRUE (DATA (0xff)), 1967 PADDR (signal), 1968 /* 1969 ** dsa is valid. 1970 ** save the status registers 1971 */ 1972 SCR_COPY (4), 1973 RADDR (scr0), 1974 NADDR (header.status), 1975 /* 1976 ** and copy back the header to the nccb. 1977 */ 1978 SCR_COPY_F (4), 1979 RADDR (dsa), 1980 PADDR (cleanup0), 1981 SCR_COPY (sizeof (struct head)), 1982 NADDR (header), 1983 }/*-------------------------< CLEANUP0 >--------------------*/,{ 1984 0, 1985 1986 /* 1987 ** If command resulted in "check condition" 1988 ** status and is not yet completed, 1989 ** try to get the condition code. 1990 */ 1991 SCR_FROM_REG (HS_REG), 1992 0, 1993 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (0, HS_DONEMASK)), 1994 16, 1995 SCR_FROM_REG (SS_REG), 1996 0, 1997 SCR_JUMP ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)), 1998 PADDRH(getcc2), 1999 }/*-------------------------< SIGNAL >----------------------*/,{ 2000 /* 2001 ** if status = queue full, 2002 ** reinsert in startqueue and stall queue. 2003 */ 2004 /*>>>*/ SCR_FROM_REG (SS_REG), 2005 0, 2006 SCR_INT ^ IFTRUE (DATA (SCSI_STATUS_QUEUE_FULL)), 2007 SIR_STALL_QUEUE, 2008 /* 2009 ** And make the DSA register invalid. 2010 */ 2011 SCR_LOAD_REG (dsa, 0xff), /* invalid */ 2012 0, 2013 /* 2014 ** if job completed ... 2015 */ 2016 SCR_FROM_REG (HS_REG), 2017 0, 2018 /* 2019 ** ... signal completion to the host 2020 */ 2021 SCR_INT_FLY ^ IFFALSE (MASK (0, HS_DONEMASK)), 2022 0, 2023 /* 2024 ** Auf zu neuen Schandtaten! 2025 */ 2026 SCR_JUMP, 2027 PADDR(start), 2028 2029 }/*-------------------------< SAVE_DP >------------------*/,{ 2030 /* 2031 ** SAVE_DP message: 2032 ** Copy TEMP register to SAVEP in header. 2033 */ 2034 SCR_COPY (4), 2035 RADDR (temp), 2036 NADDR (header.savep), 2037 SCR_JUMP, 2038 PADDR (clrack), 2039 }/*-------------------------< RESTORE_DP >---------------*/,{ 2040 /* 2041 ** RESTORE_DP message: 2042 ** Copy SAVEP in header to TEMP register. 2043 */ 2044 SCR_COPY (4), 2045 NADDR (header.savep), 2046 RADDR (temp), 2047 SCR_JUMP, 2048 PADDR (clrack), 2049 2050 }/*-------------------------< DISCONNECT >---------------*/,{ 2051 /* 2052 ** If QUIRK_AUTOSAVE is set, 2053 ** do an "save pointer" operation. 2054 */ 2055 SCR_FROM_REG (QU_REG), 2056 0, 2057 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (QUIRK_AUTOSAVE, QUIRK_AUTOSAVE)), 2058 12, 2059 /* 2060 ** like SAVE_DP message: 2061 ** Copy TEMP register to SAVEP in header. 2062 */ 2063 SCR_COPY (4), 2064 RADDR (temp), 2065 NADDR (header.savep), 2066 /*>>>*/ /* 2067 ** Check if temp==savep or temp==goalp: 2068 ** if not, log a missing save pointer message. 2069 ** In fact, it's a comparison mod 256. 2070 ** 2071 ** Hmmm, I hadn't thought that I would be urged to 2072 ** write this kind of ugly self modifying code. 2073 ** 2074 ** It's unbelievable, but the ncr53c8xx isn't able 2075 ** to subtract one register from another. 2076 */ 2077 SCR_FROM_REG (temp), 2078 0, 2079 /* 2080 ** You are not expected to understand this .. 2081 ** 2082 ** CAUTION: only little endian architectures supported! XXX 2083 */ 2084 SCR_COPY_F (1), 2085 NADDR (header.savep), 2086 PADDR (disconnect0), 2087 }/*-------------------------< DISCONNECT0 >--------------*/,{ 2088 /*<<<*/ SCR_JUMPR ^ IFTRUE (DATA (1)), 2089 20, 2090 /* 2091 ** neither this 2092 */ 2093 SCR_COPY_F (1), 2094 NADDR (header.goalp), 2095 PADDR (disconnect1), 2096 }/*-------------------------< DISCONNECT1 >--------------*/,{ 2097 SCR_INT ^ IFFALSE (DATA (1)), 2098 SIR_MISSING_SAVE, 2099 /*>>>*/ 2100 2101 /* 2102 ** DISCONNECTing ... 2103 ** 2104 ** disable the "unexpected disconnect" feature, 2105 ** and remove the ACK signal. 2106 */ 2107 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2108 0, 2109 SCR_CLR (SCR_ACK|SCR_ATN), 2110 0, 2111 /* 2112 ** Wait for the disconnect. 2113 */ 2114 SCR_WAIT_DISC, 2115 0, 2116 /* 2117 ** Profiling: 2118 ** Set a time stamp, 2119 ** and count the disconnects. 2120 */ 2121 SCR_COPY (sizeof (ticks)), 2122 KVAR (KVAR_TICKS), 2123 NADDR (header.stamp.disconnect), 2124 SCR_COPY (4), 2125 NADDR (disc_phys), 2126 RADDR (temp), 2127 SCR_REG_REG (temp, SCR_ADD, 0x01), 2128 0, 2129 SCR_COPY (4), 2130 RADDR (temp), 2131 NADDR (disc_phys), 2132 /* 2133 ** Status is: DISCONNECTED. 2134 */ 2135 SCR_LOAD_REG (HS_REG, HS_DISCONNECT), 2136 0, 2137 SCR_JUMP, 2138 PADDR (cleanup), 2139 2140 }/*-------------------------< MSG_OUT >-------------------*/,{ 2141 /* 2142 ** The target requests a message. 2143 */ 2144 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 2145 NADDR (msgout), 2146 SCR_COPY (1), 2147 RADDR (sfbr), 2148 NADDR (lastmsg), 2149 /* 2150 ** If it was no ABORT message ... 2151 */ 2152 SCR_JUMP ^ IFTRUE (DATA (MSG_ABORT)), 2153 PADDRH (msg_out_abort), 2154 /* 2155 ** ... wait for the next phase 2156 ** if it's a message out, send it again, ... 2157 */ 2158 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 2159 PADDR (msg_out), 2160 }/*-------------------------< MSG_OUT_DONE >--------------*/,{ 2161 /* 2162 ** ... else clear the message ... 2163 */ 2164 SCR_LOAD_REG (scratcha, MSG_NOOP), 2165 0, 2166 SCR_COPY (4), 2167 RADDR (scratcha), 2168 NADDR (msgout), 2169 /* 2170 ** ... and process the next phase 2171 */ 2172 SCR_JUMP, 2173 PADDR (dispatch), 2174 2175 }/*------------------------< BADGETCC >---------------------*/,{ 2176 /* 2177 ** If SIGP was set, clear it and try again. 2178 */ 2179 SCR_FROM_REG (ctest2), 2180 0, 2181 SCR_JUMP ^ IFTRUE (MASK (CSIGP,CSIGP)), 2182 PADDRH (getcc2), 2183 SCR_INT, 2184 SIR_SENSE_FAILED, 2185 }/*-------------------------< RESELECT >--------------------*/,{ 2186 /* 2187 ** This NOP will be patched with LED OFF 2188 ** SCR_REG_REG (gpreg, SCR_OR, 0x01) 2189 */ 2190 SCR_NO_OP, 2191 0, 2192 2193 /* 2194 ** make the DSA invalid. 2195 */ 2196 SCR_LOAD_REG (dsa, 0xff), 2197 0, 2198 SCR_CLR (SCR_TRG), 2199 0, 2200 /* 2201 ** Sleep waiting for a reselection. 2202 ** If SIGP is set, special treatment. 2203 ** 2204 ** Zu allem bereit .. 2205 */ 2206 SCR_WAIT_RESEL, 2207 PADDR(reselect2), 2208 }/*-------------------------< RESELECT1 >--------------------*/,{ 2209 /* 2210 ** This NOP will be patched with LED ON 2211 ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) 2212 */ 2213 SCR_NO_OP, 2214 0, 2215 /* 2216 ** ... zu nichts zu gebrauchen ? 2217 ** 2218 ** load the target id into the SFBR 2219 ** and jump to the control block. 2220 ** 2221 ** Look at the declarations of 2222 ** - struct ncb 2223 ** - struct tcb 2224 ** - struct lcb 2225 ** - struct nccb 2226 ** to understand what's going on. 2227 */ 2228 SCR_REG_SFBR (ssid, SCR_AND, 0x8F), 2229 0, 2230 SCR_TO_REG (sdid), 2231 0, 2232 SCR_JUMP, 2233 NADDR (jump_tcb), 2234 }/*-------------------------< RESELECT2 >-------------------*/,{ 2235 /* 2236 ** This NOP will be patched with LED ON 2237 ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) 2238 */ 2239 SCR_NO_OP, 2240 0, 2241 /* 2242 ** If it's not connected :( 2243 ** -> interrupted by SIGP bit. 2244 ** Jump to start. 2245 */ 2246 SCR_FROM_REG (ctest2), 2247 0, 2248 SCR_JUMP ^ IFTRUE (MASK (CSIGP,CSIGP)), 2249 PADDR (start), 2250 SCR_JUMP, 2251 PADDR (reselect), 2252 2253 }/*-------------------------< RESEL_TMP >-------------------*/,{ 2254 /* 2255 ** The return address in TEMP 2256 ** is in fact the data structure address, 2257 ** so copy it to the DSA register. 2258 */ 2259 SCR_COPY (4), 2260 RADDR (temp), 2261 RADDR (dsa), 2262 SCR_JUMP, 2263 PADDR (prepare), 2264 2265 }/*-------------------------< RESEL_LUN >-------------------*/,{ 2266 /* 2267 ** come back to this point 2268 ** to get an IDENTIFY message 2269 ** Wait for a msg_in phase. 2270 */ 2271 /*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 2272 48, 2273 /* 2274 ** message phase 2275 ** It's not a sony, it's a trick: 2276 ** read the data without acknowledging it. 2277 */ 2278 SCR_FROM_REG (sbdl), 2279 0, 2280 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (MSG_IDENTIFYFLAG, 0x98)), 2281 32, 2282 /* 2283 ** It WAS an Identify message. 2284 ** get it and ack it! 2285 */ 2286 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2287 NADDR (msgin), 2288 SCR_CLR (SCR_ACK), 2289 0, 2290 /* 2291 ** Mask out the lun. 2292 */ 2293 SCR_REG_REG (sfbr, SCR_AND, 0x07), 2294 0, 2295 SCR_RETURN, 2296 0, 2297 /* 2298 ** No message phase or no IDENTIFY message: 2299 ** return 0. 2300 */ 2301 /*>>>*/ SCR_LOAD_SFBR (0), 2302 0, 2303 SCR_RETURN, 2304 0, 2305 2306 }/*-------------------------< RESEL_TAG >-------------------*/,{ 2307 /* 2308 ** come back to this point 2309 ** to get a SIMPLE_TAG message 2310 ** Wait for a MSG_IN phase. 2311 */ 2312 /*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 2313 64, 2314 /* 2315 ** message phase 2316 ** It's a trick - read the data 2317 ** without acknowledging it. 2318 */ 2319 SCR_FROM_REG (sbdl), 2320 0, 2321 /*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (MSG_SIMPLE_Q_TAG)), 2322 48, 2323 /* 2324 ** It WAS a SIMPLE_TAG message. 2325 ** get it and ack it! 2326 */ 2327 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2328 NADDR (msgin), 2329 SCR_CLR (SCR_ACK), 2330 0, 2331 /* 2332 ** Wait for the second byte (the tag) 2333 */ 2334 /*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 2335 24, 2336 /* 2337 ** Get it and ack it! 2338 */ 2339 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2340 NADDR (msgin), 2341 SCR_CLR (SCR_ACK|SCR_CARRY), 2342 0, 2343 SCR_RETURN, 2344 0, 2345 /* 2346 ** No message phase or no SIMPLE_TAG message 2347 ** or no second byte: return 0. 2348 */ 2349 /*>>>*/ SCR_LOAD_SFBR (0), 2350 0, 2351 SCR_SET (SCR_CARRY), 2352 0, 2353 SCR_RETURN, 2354 0, 2355 2356 }/*-------------------------< DATA_IN >--------------------*/,{ 2357 /* 2358 ** Because the size depends on the 2359 ** #define MAX_SCATTER parameter, 2360 ** it is filled in at runtime. 2361 ** 2362 ** SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 2363 ** PADDR (no_data), 2364 ** SCR_COPY (sizeof (ticks)), 2365 ** KVAR (KVAR_TICKS), 2366 ** NADDR (header.stamp.data), 2367 ** SCR_MOVE_TBL ^ SCR_DATA_IN, 2368 ** offsetof (struct dsb, data[ 0]), 2369 ** 2370 ** ##===========< i=1; i<MAX_SCATTER >========= 2371 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), 2372 ** || PADDR (checkatn), 2373 ** || SCR_MOVE_TBL ^ SCR_DATA_IN, 2374 ** || offsetof (struct dsb, data[ i]), 2375 ** ##========================================== 2376 ** 2377 ** SCR_CALL, 2378 ** PADDR (checkatn), 2379 ** SCR_JUMP, 2380 ** PADDR (no_data), 2381 */ 2382 0 2383 }/*-------------------------< DATA_OUT >-------------------*/,{ 2384 /* 2385 ** Because the size depends on the 2386 ** #define MAX_SCATTER parameter, 2387 ** it is filled in at runtime. 2388 ** 2389 ** SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_OUT)), 2390 ** PADDR (no_data), 2391 ** SCR_COPY (sizeof (ticks)), 2392 ** KVAR (KVAR_TICKS), 2393 ** NADDR (header.stamp.data), 2394 ** SCR_MOVE_TBL ^ SCR_DATA_OUT, 2395 ** offsetof (struct dsb, data[ 0]), 2396 ** 2397 ** ##===========< i=1; i<MAX_SCATTER >========= 2398 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)), 2399 ** || PADDR (dispatch), 2400 ** || SCR_MOVE_TBL ^ SCR_DATA_OUT, 2401 ** || offsetof (struct dsb, data[ i]), 2402 ** ##========================================== 2403 ** 2404 ** SCR_CALL, 2405 ** PADDR (dispatch), 2406 ** SCR_JUMP, 2407 ** PADDR (no_data), 2408 ** 2409 **--------------------------------------------------------- 2410 */ 2411 (u_long)0 2412 2413 }/*--------------------------------------------------------*/ 2414 }; 2415 2416 2417 static struct scripth scripth0 = { 2418 /*-------------------------< TRYLOOP >---------------------*/{ 2419 /* 2420 ** Load an entry of the start queue into dsa 2421 ** and try to start it by jumping to TRYSEL. 2422 ** 2423 ** Because the size depends on the 2424 ** #define MAX_START parameter, it is filled 2425 ** in at runtime. 2426 ** 2427 **----------------------------------------------------------- 2428 ** 2429 ** ##===========< I=0; i<MAX_START >=========== 2430 ** || SCR_COPY (4), 2431 ** || NADDR (squeue[i]), 2432 ** || RADDR (dsa), 2433 ** || SCR_CALL, 2434 ** || PADDR (trysel), 2435 ** ##========================================== 2436 ** 2437 ** SCR_JUMP, 2438 ** PADDRH(tryloop), 2439 ** 2440 **----------------------------------------------------------- 2441 */ 2442 0 2443 }/*-------------------------< MSG_PARITY >---------------*/,{ 2444 /* 2445 ** count it 2446 */ 2447 SCR_REG_REG (PS_REG, SCR_ADD, 0x01), 2448 0, 2449 /* 2450 ** send a "message parity error" message. 2451 */ 2452 SCR_LOAD_REG (scratcha, MSG_PARITY_ERROR), 2453 0, 2454 SCR_JUMP, 2455 PADDR (setmsg), 2456 }/*-------------------------< MSG_MESSAGE_REJECT >---------------*/,{ 2457 /* 2458 ** If a negotiation was in progress, 2459 ** negotiation failed. 2460 */ 2461 SCR_FROM_REG (HS_REG), 2462 0, 2463 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 2464 SIR_NEGO_FAILED, 2465 /* 2466 ** else make host log this message 2467 */ 2468 SCR_INT ^ IFFALSE (DATA (HS_NEGOTIATE)), 2469 SIR_REJECT_RECEIVED, 2470 SCR_JUMP, 2471 PADDR (clrack), 2472 2473 }/*-------------------------< MSG_IGN_RESIDUE >----------*/,{ 2474 /* 2475 ** Terminate cycle 2476 */ 2477 SCR_CLR (SCR_ACK), 2478 0, 2479 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2480 PADDR (dispatch), 2481 /* 2482 ** get residue size. 2483 */ 2484 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2485 NADDR (msgin[1]), 2486 /* 2487 ** Check for message parity error. 2488 */ 2489 SCR_TO_REG (scratcha), 2490 0, 2491 SCR_FROM_REG (socl), 2492 0, 2493 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2494 PADDRH (msg_parity), 2495 SCR_FROM_REG (scratcha), 2496 0, 2497 /* 2498 ** Size is 0 .. ignore message. 2499 */ 2500 SCR_JUMP ^ IFTRUE (DATA (0)), 2501 PADDR (clrack), 2502 /* 2503 ** Size is not 1 .. have to interrupt. 2504 */ 2505 /*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (1)), 2506 40, 2507 /* 2508 ** Check for residue byte in swide register 2509 */ 2510 SCR_FROM_REG (scntl2), 2511 0, 2512 /*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), 2513 16, 2514 /* 2515 ** There IS data in the swide register. 2516 ** Discard it. 2517 */ 2518 SCR_REG_REG (scntl2, SCR_OR, WSR), 2519 0, 2520 SCR_JUMP, 2521 PADDR (clrack), 2522 /* 2523 ** Load again the size to the sfbr register. 2524 */ 2525 /*>>>*/ SCR_FROM_REG (scratcha), 2526 0, 2527 /*>>>*/ SCR_INT, 2528 SIR_IGN_RESIDUE, 2529 SCR_JUMP, 2530 PADDR (clrack), 2531 2532 }/*-------------------------< MSG_EXTENDED >-------------*/,{ 2533 /* 2534 ** Terminate cycle 2535 */ 2536 SCR_CLR (SCR_ACK), 2537 0, 2538 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2539 PADDR (dispatch), 2540 /* 2541 ** get length. 2542 */ 2543 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2544 NADDR (msgin[1]), 2545 /* 2546 ** Check for message parity error. 2547 */ 2548 SCR_TO_REG (scratcha), 2549 0, 2550 SCR_FROM_REG (socl), 2551 0, 2552 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2553 PADDRH (msg_parity), 2554 SCR_FROM_REG (scratcha), 2555 0, 2556 /* 2557 */ 2558 SCR_JUMP ^ IFTRUE (DATA (3)), 2559 PADDRH (msg_ext_3), 2560 SCR_JUMP ^ IFFALSE (DATA (2)), 2561 PADDR (msg_bad), 2562 }/*-------------------------< MSG_EXT_2 >----------------*/,{ 2563 SCR_CLR (SCR_ACK), 2564 0, 2565 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2566 PADDR (dispatch), 2567 /* 2568 ** get extended message code. 2569 */ 2570 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2571 NADDR (msgin[2]), 2572 /* 2573 ** Check for message parity error. 2574 */ 2575 SCR_TO_REG (scratcha), 2576 0, 2577 SCR_FROM_REG (socl), 2578 0, 2579 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2580 PADDRH (msg_parity), 2581 SCR_FROM_REG (scratcha), 2582 0, 2583 SCR_JUMP ^ IFTRUE (DATA (MSG_EXT_WDTR)), 2584 PADDRH (msg_wdtr), 2585 /* 2586 ** unknown extended message 2587 */ 2588 SCR_JUMP, 2589 PADDR (msg_bad) 2590 }/*-------------------------< MSG_WDTR >-----------------*/,{ 2591 SCR_CLR (SCR_ACK), 2592 0, 2593 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2594 PADDR (dispatch), 2595 /* 2596 ** get data bus width 2597 */ 2598 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2599 NADDR (msgin[3]), 2600 SCR_FROM_REG (socl), 2601 0, 2602 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2603 PADDRH (msg_parity), 2604 /* 2605 ** let the host do the real work. 2606 */ 2607 SCR_INT, 2608 SIR_NEGO_WIDE, 2609 /* 2610 ** let the target fetch our answer. 2611 */ 2612 SCR_SET (SCR_ATN), 2613 0, 2614 SCR_CLR (SCR_ACK), 2615 0, 2616 2617 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), 2618 SIR_NEGO_PROTO, 2619 /* 2620 ** Send the MSG_EXT_WDTR 2621 */ 2622 SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, 2623 NADDR (msgout), 2624 SCR_CLR (SCR_ATN), 2625 0, 2626 SCR_COPY (1), 2627 RADDR (sfbr), 2628 NADDR (lastmsg), 2629 SCR_JUMP, 2630 PADDR (msg_out_done), 2631 2632 }/*-------------------------< MSG_EXT_3 >----------------*/,{ 2633 SCR_CLR (SCR_ACK), 2634 0, 2635 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2636 PADDR (dispatch), 2637 /* 2638 ** get extended message code. 2639 */ 2640 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2641 NADDR (msgin[2]), 2642 /* 2643 ** Check for message parity error. 2644 */ 2645 SCR_TO_REG (scratcha), 2646 0, 2647 SCR_FROM_REG (socl), 2648 0, 2649 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2650 PADDRH (msg_parity), 2651 SCR_FROM_REG (scratcha), 2652 0, 2653 SCR_JUMP ^ IFTRUE (DATA (MSG_EXT_SDTR)), 2654 PADDRH (msg_sdtr), 2655 /* 2656 ** unknown extended message 2657 */ 2658 SCR_JUMP, 2659 PADDR (msg_bad) 2660 2661 }/*-------------------------< MSG_SDTR >-----------------*/,{ 2662 SCR_CLR (SCR_ACK), 2663 0, 2664 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2665 PADDR (dispatch), 2666 /* 2667 ** get period and offset 2668 */ 2669 SCR_MOVE_ABS (2) ^ SCR_MSG_IN, 2670 NADDR (msgin[3]), 2671 SCR_FROM_REG (socl), 2672 0, 2673 SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)), 2674 PADDRH (msg_parity), 2675 /* 2676 ** let the host do the real work. 2677 */ 2678 SCR_INT, 2679 SIR_NEGO_SYNC, 2680 /* 2681 ** let the target fetch our answer. 2682 */ 2683 SCR_SET (SCR_ATN), 2684 0, 2685 SCR_CLR (SCR_ACK), 2686 0, 2687 2688 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)), 2689 SIR_NEGO_PROTO, 2690 /* 2691 ** Send the MSG_EXT_SDTR 2692 */ 2693 SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, 2694 NADDR (msgout), 2695 SCR_CLR (SCR_ATN), 2696 0, 2697 SCR_COPY (1), 2698 RADDR (sfbr), 2699 NADDR (lastmsg), 2700 SCR_JUMP, 2701 PADDR (msg_out_done), 2702 2703 }/*-------------------------< MSG_OUT_ABORT >-------------*/,{ 2704 /* 2705 ** After ABORT message, 2706 ** 2707 ** expect an immediate disconnect, ... 2708 */ 2709 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2710 0, 2711 SCR_CLR (SCR_ACK|SCR_ATN), 2712 0, 2713 SCR_WAIT_DISC, 2714 0, 2715 /* 2716 ** ... and set the status to "ABORTED" 2717 */ 2718 SCR_LOAD_REG (HS_REG, HS_ABORTED), 2719 0, 2720 SCR_JUMP, 2721 PADDR (cleanup), 2722 2723 }/*-------------------------< GETCC >-----------------------*/,{ 2724 /* 2725 ** The ncr doesn't have an indirect load 2726 ** or store command. So we have to 2727 ** copy part of the control block to a 2728 ** fixed place, where we can modify it. 2729 ** 2730 ** We patch the address part of a COPY command 2731 ** with the address of the dsa register ... 2732 */ 2733 SCR_COPY_F (4), 2734 RADDR (dsa), 2735 PADDRH (getcc1), 2736 /* 2737 ** ... then we do the actual copy. 2738 */ 2739 SCR_COPY (sizeof (struct head)), 2740 }/*-------------------------< GETCC1 >----------------------*/,{ 2741 0, 2742 NADDR (header), 2743 /* 2744 ** Initialize the status registers 2745 */ 2746 SCR_COPY (4), 2747 NADDR (header.status), 2748 RADDR (scr0), 2749 }/*-------------------------< GETCC2 >----------------------*/,{ 2750 /* 2751 ** Get the condition code from a target. 2752 ** 2753 ** DSA points to a data structure. 2754 ** Set TEMP to the script location 2755 ** that receives the condition code. 2756 ** 2757 ** Because there is no script command 2758 ** to load a longword into a register, 2759 ** we use a CALL command. 2760 */ 2761 /*<<<*/ SCR_CALLR, 2762 24, 2763 /* 2764 ** Get the condition code. 2765 */ 2766 SCR_MOVE_TBL ^ SCR_DATA_IN, 2767 offsetof (struct dsb, sense), 2768 /* 2769 ** No data phase may follow! 2770 */ 2771 SCR_CALL, 2772 PADDR (checkatn), 2773 SCR_JUMP, 2774 PADDR (no_data), 2775 /*>>>*/ 2776 2777 /* 2778 ** The CALL jumps to this point. 2779 ** Prepare for a RESTORE_POINTER message. 2780 ** Save the TEMP register into the saved pointer. 2781 */ 2782 SCR_COPY (4), 2783 RADDR (temp), 2784 NADDR (header.savep), 2785 /* 2786 ** Load scratcha, because in case of a selection timeout, 2787 ** the host will expect a new value for startpos in 2788 ** the scratcha register. 2789 */ 2790 SCR_COPY (4), 2791 PADDR (startpos), 2792 RADDR (scratcha), 2793 #ifdef NCR_GETCC_WITHMSG 2794 /* 2795 ** If QUIRK_NOMSG is set, select without ATN. 2796 ** and don't send a message. 2797 */ 2798 SCR_FROM_REG (QU_REG), 2799 0, 2800 SCR_JUMP ^ IFTRUE (MASK (QUIRK_NOMSG, QUIRK_NOMSG)), 2801 PADDRH(getcc3), 2802 /* 2803 ** Then try to connect to the target. 2804 ** If we are reselected, special treatment 2805 ** of the current job is required before 2806 ** accepting the reselection. 2807 */ 2808 SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select), 2809 PADDR(badgetcc), 2810 /* 2811 ** Send the IDENTIFY message. 2812 ** In case of short transfer, remove ATN. 2813 */ 2814 SCR_MOVE_TBL ^ SCR_MSG_OUT, 2815 offsetof (struct dsb, smsg2), 2816 SCR_CLR (SCR_ATN), 2817 0, 2818 /* 2819 ** save the first byte of the message. 2820 */ 2821 SCR_COPY (1), 2822 RADDR (sfbr), 2823 NADDR (lastmsg), 2824 SCR_JUMP, 2825 PADDR (prepare2), 2826 2827 #endif 2828 }/*-------------------------< GETCC3 >----------------------*/,{ 2829 /* 2830 ** Try to connect to the target. 2831 ** If we are reselected, special treatment 2832 ** of the current job is required before 2833 ** accepting the reselection. 2834 ** 2835 ** Silly target won't accept a message. 2836 ** Select without ATN. 2837 */ 2838 SCR_SEL_TBL ^ offsetof (struct dsb, select), 2839 PADDR(badgetcc), 2840 /* 2841 ** Force error if selection timeout 2842 */ 2843 SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_IN)), 2844 0, 2845 /* 2846 ** don't negotiate. 2847 */ 2848 SCR_JUMP, 2849 PADDR (prepare2), 2850 }/*-------------------------< ABORTTAG >-------------------*/,{ 2851 /* 2852 ** Abort a bad reselection. 2853 ** Set the message to ABORT vs. ABORT_TAG 2854 */ 2855 SCR_LOAD_REG (scratcha, MSG_ABORT_TAG), 2856 0, 2857 SCR_JUMPR ^ IFFALSE (CARRYSET), 2858 8, 2859 }/*-------------------------< ABORT >----------------------*/,{ 2860 SCR_LOAD_REG (scratcha, MSG_ABORT), 2861 0, 2862 SCR_COPY (1), 2863 RADDR (scratcha), 2864 NADDR (msgout), 2865 SCR_SET (SCR_ATN), 2866 0, 2867 SCR_CLR (SCR_ACK), 2868 0, 2869 /* 2870 ** and send it. 2871 ** we expect an immediate disconnect 2872 */ 2873 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2874 0, 2875 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 2876 NADDR (msgout), 2877 SCR_COPY (1), 2878 RADDR (sfbr), 2879 NADDR (lastmsg), 2880 SCR_CLR (SCR_ACK|SCR_ATN), 2881 0, 2882 SCR_WAIT_DISC, 2883 0, 2884 SCR_JUMP, 2885 PADDR (start), 2886 }/*-------------------------< SNOOPTEST >-------------------*/,{ 2887 /* 2888 ** Read the variable. 2889 */ 2890 SCR_COPY (4), 2891 KVAR (KVAR_NCR_CACHE), 2892 RADDR (scratcha), 2893 /* 2894 ** Write the variable. 2895 */ 2896 SCR_COPY (4), 2897 RADDR (temp), 2898 KVAR (KVAR_NCR_CACHE), 2899 /* 2900 ** Read back the variable. 2901 */ 2902 SCR_COPY (4), 2903 KVAR (KVAR_NCR_CACHE), 2904 RADDR (temp), 2905 }/*-------------------------< SNOOPEND >-------------------*/,{ 2906 /* 2907 ** And stop. 2908 */ 2909 SCR_INT, 2910 99, 2911 }/*--------------------------------------------------------*/ 2912 }; 2913 2914 2915 /*========================================================== 2916 ** 2917 ** 2918 ** Fill in #define dependent parts of the script 2919 ** 2920 ** 2921 **========================================================== 2922 */ 2923 2924 void ncr_script_fill (struct script * scr, struct scripth * scrh) 2925 { 2926 int i; 2927 ncrcmd *p; 2928 2929 p = scrh->tryloop; 2930 for (i=0; i<MAX_START; i++) { 2931 *p++ =SCR_COPY (4); 2932 *p++ =NADDR (squeue[i]); 2933 *p++ =RADDR (dsa); 2934 *p++ =SCR_CALL; 2935 *p++ =PADDR (trysel); 2936 } 2937 *p++ =SCR_JUMP; 2938 *p++ =PADDRH(tryloop); 2939 2940 assert ((char *)p == (char *)&scrh->tryloop + sizeof (scrh->tryloop)); 2941 2942 p = scr->data_in; 2943 2944 *p++ =SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)); 2945 *p++ =PADDR (no_data); 2946 *p++ =SCR_COPY (sizeof (ticks)); 2947 *p++ =(ncrcmd) KVAR (KVAR_TICKS); 2948 *p++ =NADDR (header.stamp.data); 2949 *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; 2950 *p++ =offsetof (struct dsb, data[ 0]); 2951 2952 for (i=1; i<MAX_SCATTER; i++) { 2953 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)); 2954 *p++ =PADDR (checkatn); 2955 *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; 2956 *p++ =offsetof (struct dsb, data[i]); 2957 } 2958 2959 *p++ =SCR_CALL; 2960 *p++ =PADDR (checkatn); 2961 *p++ =SCR_JUMP; 2962 *p++ =PADDR (no_data); 2963 2964 assert ((char *)p == (char *)&scr->data_in + sizeof (scr->data_in)); 2965 2966 p = scr->data_out; 2967 2968 *p++ =SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_OUT)); 2969 *p++ =PADDR (no_data); 2970 *p++ =SCR_COPY (sizeof (ticks)); 2971 *p++ =(ncrcmd) KVAR (KVAR_TICKS); 2972 *p++ =NADDR (header.stamp.data); 2973 *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; 2974 *p++ =offsetof (struct dsb, data[ 0]); 2975 2976 for (i=1; i<MAX_SCATTER; i++) { 2977 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)); 2978 *p++ =PADDR (dispatch); 2979 *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; 2980 *p++ =offsetof (struct dsb, data[i]); 2981 } 2982 2983 *p++ =SCR_CALL; 2984 *p++ =PADDR (dispatch); 2985 *p++ =SCR_JUMP; 2986 *p++ =PADDR (no_data); 2987 2988 assert ((char *)p == (char *)&scr->data_out + sizeof (scr->data_out)); 2989 } 2990 2991 /*========================================================== 2992 ** 2993 ** 2994 ** Copy and rebind a script. 2995 ** 2996 ** 2997 **========================================================== 2998 */ 2999 3000 static void ncr_script_copy_and_bind (ncb_p np, ncrcmd *src, ncrcmd *dst, int len) 3001 { 3002 ncrcmd opcode, new, old, tmp1, tmp2; 3003 ncrcmd *start, *end; 3004 int relocs, offset; 3005 3006 start = src; 3007 end = src + len/4; 3008 offset = 0; 3009 3010 while (src < end) { 3011 3012 opcode = *src++; 3013 WRITESCRIPT_OFF(dst, offset, opcode); 3014 offset += 4; 3015 3016 /* 3017 ** If we forget to change the length 3018 ** in struct script, a field will be 3019 ** padded with 0. This is an illegal 3020 ** command. 3021 */ 3022 3023 if (opcode == 0) { 3024 kprintf ("%s: ERROR0 IN SCRIPT at %d.\n", 3025 ncr_name(np), (int) (src-start-1)); 3026 DELAY (1000000); 3027 } 3028 3029 if (DEBUG_FLAGS & DEBUG_SCRIPT) 3030 kprintf ("%p: <%x>\n", 3031 (src-1), (unsigned)opcode); 3032 3033 /* 3034 ** We don't have to decode ALL commands 3035 */ 3036 switch (opcode >> 28) { 3037 3038 case 0xc: 3039 /* 3040 ** COPY has TWO arguments. 3041 */ 3042 relocs = 2; 3043 tmp1 = src[0]; 3044 if ((tmp1 & RELOC_MASK) == RELOC_KVAR) 3045 tmp1 = 0; 3046 tmp2 = src[1]; 3047 if ((tmp2 & RELOC_MASK) == RELOC_KVAR) 3048 tmp2 = 0; 3049 if ((tmp1 ^ tmp2) & 3) { 3050 kprintf ("%s: ERROR1 IN SCRIPT at %d.\n", 3051 ncr_name(np), (int) (src-start-1)); 3052 DELAY (1000000); 3053 } 3054 /* 3055 ** If PREFETCH feature not enabled, remove 3056 ** the NO FLUSH bit if present. 3057 */ 3058 if ((opcode & SCR_NO_FLUSH) && !(np->features&FE_PFEN)) 3059 WRITESCRIPT_OFF(dst, offset - 4, 3060 (opcode & ~SCR_NO_FLUSH)); 3061 break; 3062 3063 case 0x0: 3064 /* 3065 ** MOVE (absolute address) 3066 */ 3067 relocs = 1; 3068 break; 3069 3070 case 0x8: 3071 /* 3072 ** JUMP / CALL 3073 ** dont't relocate if relative :-) 3074 */ 3075 if (opcode & 0x00800000) 3076 relocs = 0; 3077 else 3078 relocs = 1; 3079 break; 3080 3081 case 0x4: 3082 case 0x5: 3083 case 0x6: 3084 case 0x7: 3085 relocs = 1; 3086 break; 3087 3088 default: 3089 relocs = 0; 3090 break; 3091 } 3092 3093 if (relocs) { 3094 while (relocs--) { 3095 old = *src++; 3096 3097 switch (old & RELOC_MASK) { 3098 case RELOC_REGISTER: 3099 new = (old & ~RELOC_MASK) + rman_get_start(np->reg_res); 3100 break; 3101 case RELOC_LABEL: 3102 new = (old & ~RELOC_MASK) + np->p_script; 3103 break; 3104 case RELOC_LABELH: 3105 new = (old & ~RELOC_MASK) + np->p_scripth; 3106 break; 3107 case RELOC_SOFTC: 3108 new = (old & ~RELOC_MASK) + vtophys(np); 3109 break; 3110 case RELOC_KVAR: 3111 if (((old & ~RELOC_MASK) < 3112 SCRIPT_KVAR_FIRST) || 3113 ((old & ~RELOC_MASK) > 3114 SCRIPT_KVAR_LAST)) 3115 panic("ncr KVAR out of range"); 3116 new = vtophys(script_kvars[old & 3117 ~RELOC_MASK]); 3118 break; 3119 case 0: 3120 /* Don't relocate a 0 address. */ 3121 if (old == 0) { 3122 new = old; 3123 break; 3124 } 3125 /* fall through */ 3126 default: 3127 panic("ncr_script_copy_and_bind: weird relocation %x @ %d", old, (int)(src - start)); 3128 break; 3129 } 3130 3131 WRITESCRIPT_OFF(dst, offset, new); 3132 offset += 4; 3133 } 3134 } else { 3135 WRITESCRIPT_OFF(dst, offset, *src++); 3136 offset += 4; 3137 } 3138 3139 } 3140 } 3141 3142 /*========================================================== 3143 ** 3144 ** 3145 ** Auto configuration. 3146 ** 3147 ** 3148 **========================================================== 3149 */ 3150 3151 #if 0 3152 /*---------------------------------------------------------- 3153 ** 3154 ** Reduce the transfer length to the max value 3155 ** we can transfer safely. 3156 ** 3157 ** Reading a block greater then MAX_SIZE from the 3158 ** raw (character) device exercises a memory leak 3159 ** in the vm subsystem. This is common to ALL devices. 3160 ** We have submitted a description of this bug to 3161 ** <FreeBSD-bugs@freefall.cdrom.com>. 3162 ** It should be fixed in the current release. 3163 ** 3164 **---------------------------------------------------------- 3165 */ 3166 3167 void ncr_min_phys (struct buf *bp) 3168 { 3169 if ((unsigned long)bp->b_bcount > MAX_SIZE) bp->b_bcount = MAX_SIZE; 3170 } 3171 3172 #endif 3173 3174 #if 0 3175 /*---------------------------------------------------------- 3176 ** 3177 ** Maximal number of outstanding requests per target. 3178 ** 3179 **---------------------------------------------------------- 3180 */ 3181 3182 u_int32_t ncr_info (int unit) 3183 { 3184 return (1); /* may be changed later */ 3185 } 3186 3187 #endif 3188 3189 /*---------------------------------------------------------- 3190 ** 3191 ** NCR chip devices table and chip look up function. 3192 ** Features bit are defined in ncrreg.h. Is it the 3193 ** right place? 3194 ** 3195 **---------------------------------------------------------- 3196 */ 3197 typedef struct { 3198 unsigned long device_id; 3199 unsigned short minrevid; 3200 char *name; 3201 unsigned char maxburst; 3202 unsigned char maxoffs; 3203 unsigned char clock_divn; 3204 unsigned int features; 3205 } ncr_chip; 3206 3207 static ncr_chip ncr_chip_table[] = { 3208 {NCR_810_ID, 0x00, "ncr 53c810 fast10 scsi", 4, 8, 4, 3209 FE_ERL} 3210 , 3211 {NCR_810_ID, 0x10, "ncr 53c810a fast10 scsi", 4, 8, 4, 3212 FE_ERL|FE_LDSTR|FE_PFEN|FE_BOF} 3213 , 3214 {NCR_815_ID, 0x00, "ncr 53c815 fast10 scsi", 4, 8, 4, 3215 FE_ERL|FE_BOF} 3216 , 3217 {NCR_820_ID, 0x00, "ncr 53c820 fast10 wide scsi", 4, 8, 4, 3218 FE_WIDE|FE_ERL} 3219 , 3220 {NCR_825_ID, 0x00, "ncr 53c825 fast10 wide scsi", 4, 8, 4, 3221 FE_WIDE|FE_ERL|FE_BOF} 3222 , 3223 {NCR_825_ID, 0x10, "ncr 53c825a fast10 wide scsi", 7, 8, 4, 3224 FE_WIDE|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3225 , 3226 {NCR_860_ID, 0x00, "ncr 53c860 fast20 scsi", 4, 8, 5, 3227 FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_LDSTR|FE_PFEN} 3228 , 3229 {NCR_875_ID, 0x00, "ncr 53c875 fast20 wide scsi", 7, 16, 5, 3230 FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3231 , 3232 {NCR_875_ID, 0x02, "ncr 53c875 fast20 wide scsi", 7, 16, 5, 3233 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3234 , 3235 {NCR_875_ID2, 0x00, "ncr 53c875j fast20 wide scsi", 7, 16, 5, 3236 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3237 , 3238 {NCR_885_ID, 0x00, "ncr 53c885 fast20 wide scsi", 7, 16, 5, 3239 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3240 , 3241 {NCR_895_ID, 0x00, "ncr 53c895 fast40 wide scsi", 7, 31, 7, 3242 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3243 , 3244 {NCR_896_ID, 0x00, "ncr 53c896 fast40 wide scsi", 7, 31, 7, 3245 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3246 , 3247 {NCR_895A_ID, 0x00, "ncr 53c895a fast40 wide scsi", 7, 31, 7, 3248 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3249 , 3250 {NCR_1510D_ID, 0x00, "ncr 53c1510d fast40 wide scsi", 7, 31, 7, 3251 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM} 3252 }; 3253 3254 static int ncr_chip_lookup(u_long device_id, u_char revision_id) 3255 { 3256 int i, found; 3257 3258 found = -1; 3259 for (i = 0; i < NELEM(ncr_chip_table); i++) { 3260 if (device_id == ncr_chip_table[i].device_id && 3261 ncr_chip_table[i].minrevid <= revision_id) { 3262 if (found < 0 || 3263 ncr_chip_table[found].minrevid 3264 < ncr_chip_table[i].minrevid) { 3265 found = i; 3266 } 3267 } 3268 } 3269 return found; 3270 } 3271 3272 /*---------------------------------------------------------- 3273 ** 3274 ** Probe the hostadapter. 3275 ** 3276 **---------------------------------------------------------- 3277 */ 3278 3279 3280 3281 static int ncr_probe (device_t dev) 3282 { 3283 int i; 3284 3285 i = ncr_chip_lookup(pci_get_devid(dev), pci_get_revid(dev)); 3286 if (i >= 0) { 3287 device_set_desc(dev, ncr_chip_table[i].name); 3288 return (-1000); /* Allows to use both ncr and sym */ 3289 } 3290 3291 return (ENXIO); 3292 } 3293 3294 3295 3296 /*========================================================== 3297 ** 3298 ** NCR chip clock divisor table. 3299 ** Divisors are multiplied by 10,000,000 in order to make 3300 ** calculations more simple. 3301 ** 3302 **========================================================== 3303 */ 3304 3305 #define _5M 5000000 3306 static u_long div_10M[] = 3307 {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M}; 3308 3309 /*=============================================================== 3310 ** 3311 ** NCR chips allow burst lengths of 2, 4, 8, 16, 32, 64, 128 3312 ** transfers. 32,64,128 are only supported by 875 and 895 chips. 3313 ** We use log base 2 (burst length) as internal code, with 3314 ** value 0 meaning "burst disabled". 3315 ** 3316 **=============================================================== 3317 */ 3318 3319 /* 3320 * Burst length from burst code. 3321 */ 3322 #define burst_length(bc) (!(bc))? 0 : 1 << (bc) 3323 3324 /* 3325 * Burst code from io register bits. 3326 */ 3327 #define burst_code(dmode, ctest4, ctest5) \ 3328 (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1 3329 3330 /* 3331 * Set initial io register bits from burst code. 3332 */ 3333 static void 3334 ncr_init_burst(ncb_p np, u_char bc) 3335 { 3336 np->rv_ctest4 &= ~0x80; 3337 np->rv_dmode &= ~(0x3 << 6); 3338 np->rv_ctest5 &= ~0x4; 3339 3340 if (!bc) { 3341 np->rv_ctest4 |= 0x80; 3342 } 3343 else { 3344 --bc; 3345 np->rv_dmode |= ((bc & 0x3) << 6); 3346 np->rv_ctest5 |= (bc & 0x4); 3347 } 3348 } 3349 3350 /*========================================================== 3351 ** 3352 ** 3353 ** Auto configuration: attach and init a host adapter. 3354 ** 3355 ** 3356 **========================================================== 3357 */ 3358 3359 3360 static int 3361 ncr_attach (device_t dev) 3362 { 3363 ncb_p np = (struct ncb*) device_get_softc(dev); 3364 u_char rev = 0; 3365 u_long period; 3366 int i, rid; 3367 u_int8_t usrsync; 3368 u_int8_t usrwide; 3369 struct cam_devq *devq; 3370 3371 /* 3372 ** allocate and initialize structures. 3373 */ 3374 3375 np->unit = device_get_unit(dev); 3376 3377 /* 3378 ** Try to map the controller chip to 3379 ** virtual and physical memory. 3380 */ 3381 3382 np->reg_rid = 0x14; 3383 np->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &np->reg_rid, 3384 0, ~0, 1, RF_ACTIVE); 3385 if (!np->reg_res) { 3386 device_printf(dev, "could not map memory\n"); 3387 return ENXIO; 3388 } 3389 3390 /* 3391 ** Make the controller's registers available. 3392 ** Now the INB INW INL OUTB OUTW OUTL macros 3393 ** can be used safely. 3394 */ 3395 3396 np->bst = rman_get_bustag(np->reg_res); 3397 np->bsh = rman_get_bushandle(np->reg_res); 3398 3399 3400 #ifdef NCR_IOMAPPED 3401 /* 3402 ** Try to map the controller chip into iospace. 3403 */ 3404 3405 if (!pci_map_port (config_id, 0x10, &np->port)) 3406 return; 3407 #endif 3408 3409 3410 /* 3411 ** Save some controller register default values 3412 */ 3413 3414 np->rv_scntl3 = INB(nc_scntl3) & 0x77; 3415 np->rv_dmode = INB(nc_dmode) & 0xce; 3416 np->rv_dcntl = INB(nc_dcntl) & 0xa9; 3417 np->rv_ctest3 = INB(nc_ctest3) & 0x01; 3418 np->rv_ctest4 = INB(nc_ctest4) & 0x88; 3419 np->rv_ctest5 = INB(nc_ctest5) & 0x24; 3420 np->rv_gpcntl = INB(nc_gpcntl); 3421 np->rv_stest2 = INB(nc_stest2) & 0x20; 3422 3423 if (bootverbose >= 2) { 3424 kprintf ("\tBIOS values: SCNTL3:%02x DMODE:%02x DCNTL:%02x\n", 3425 np->rv_scntl3, np->rv_dmode, np->rv_dcntl); 3426 kprintf ("\t CTEST3:%02x CTEST4:%02x CTEST5:%02x\n", 3427 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 3428 } 3429 3430 np->rv_dcntl |= NOCOM; 3431 3432 /* 3433 ** Do chip dependent initialization. 3434 */ 3435 3436 rev = pci_get_revid(dev); 3437 3438 /* 3439 ** Get chip features from chips table. 3440 */ 3441 i = ncr_chip_lookup(pci_get_devid(dev), rev); 3442 3443 if (i >= 0) { 3444 np->maxburst = ncr_chip_table[i].maxburst; 3445 np->maxoffs = ncr_chip_table[i].maxoffs; 3446 np->clock_divn = ncr_chip_table[i].clock_divn; 3447 np->features = ncr_chip_table[i].features; 3448 } else { /* Should'nt happen if probe() is ok */ 3449 np->maxburst = 4; 3450 np->maxoffs = 8; 3451 np->clock_divn = 4; 3452 np->features = FE_ERL; 3453 } 3454 3455 np->maxwide = np->features & FE_WIDE ? 1 : 0; 3456 np->clock_khz = np->features & FE_CLK80 ? 80000 : 40000; 3457 if (np->features & FE_QUAD) np->multiplier = 4; 3458 else if (np->features & FE_DBLR) np->multiplier = 2; 3459 else np->multiplier = 1; 3460 3461 /* 3462 ** Get the frequency of the chip's clock. 3463 ** Find the right value for scntl3. 3464 */ 3465 if (np->features & (FE_ULTRA|FE_ULTRA2)) 3466 ncr_getclock(np, np->multiplier); 3467 3468 #ifdef NCR_TEKRAM_EEPROM 3469 if (bootverbose) { 3470 kprintf ("%s: Tekram EEPROM read %s\n", 3471 ncr_name(np), 3472 read_tekram_eeprom (np, NULL) ? 3473 "succeeded" : "failed"); 3474 } 3475 #endif /* NCR_TEKRAM_EEPROM */ 3476 3477 /* 3478 * If scntl3 != 0, we assume BIOS is present. 3479 */ 3480 if (np->rv_scntl3) 3481 np->features |= FE_BIOS; 3482 3483 /* 3484 * Divisor to be used for async (timer pre-scaler). 3485 */ 3486 i = np->clock_divn - 1; 3487 while (i >= 0) { 3488 --i; 3489 if (10ul * SCSI_NCR_MIN_ASYNC * np->clock_khz > div_10M[i]) { 3490 ++i; 3491 break; 3492 } 3493 } 3494 np->rv_scntl3 = i+1; 3495 3496 /* 3497 * Minimum synchronous period factor supported by the chip. 3498 * Btw, 'period' is in tenths of nanoseconds. 3499 */ 3500 3501 period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz; 3502 if (period <= 250) np->minsync = 10; 3503 else if (period <= 303) np->minsync = 11; 3504 else if (period <= 500) np->minsync = 12; 3505 else np->minsync = (period + 40 - 1) / 40; 3506 3507 /* 3508 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2). 3509 */ 3510 3511 if (np->minsync < 25 && !(np->features & (FE_ULTRA|FE_ULTRA2))) 3512 np->minsync = 25; 3513 else if (np->minsync < 12 && !(np->features & FE_ULTRA2)) 3514 np->minsync = 12; 3515 3516 /* 3517 * Maximum synchronous period factor supported by the chip. 3518 */ 3519 3520 period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz); 3521 np->maxsync = period > 2540 ? 254 : period / 10; 3522 3523 /* 3524 * Now, some features available with Symbios compatible boards. 3525 * LED support through GPIO0 and DIFF support. 3526 */ 3527 3528 #ifdef SCSI_NCR_SYMBIOS_COMPAT 3529 if (!(np->rv_gpcntl & 0x01)) 3530 np->features |= FE_LED0; 3531 #if 0 /* Not safe enough without NVRAM support or user settable option */ 3532 if (!(INB(nc_gpreg) & 0x08)) 3533 np->features |= FE_DIFF; 3534 #endif 3535 #endif /* SCSI_NCR_SYMBIOS_COMPAT */ 3536 3537 /* 3538 * Prepare initial IO registers settings. 3539 * Trust BIOS only if we believe we have one and if we want to. 3540 */ 3541 #ifdef SCSI_NCR_TRUST_BIOS 3542 if (!(np->features & FE_BIOS)) { 3543 #else 3544 if (1) { 3545 #endif 3546 np->rv_dmode = 0; 3547 np->rv_dcntl = NOCOM; 3548 np->rv_ctest3 = 0; 3549 np->rv_ctest4 = MPEE; 3550 np->rv_ctest5 = 0; 3551 np->rv_stest2 = 0; 3552 3553 if (np->features & FE_ERL) 3554 np->rv_dmode |= ERL; /* Enable Read Line */ 3555 if (np->features & FE_BOF) 3556 np->rv_dmode |= BOF; /* Burst Opcode Fetch */ 3557 if (np->features & FE_ERMP) 3558 np->rv_dmode |= ERMP; /* Enable Read Multiple */ 3559 if (np->features & FE_CLSE) 3560 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */ 3561 if (np->features & FE_WRIE) 3562 np->rv_ctest3 |= WRIE; /* Write and Invalidate */ 3563 if (np->features & FE_PFEN) 3564 np->rv_dcntl |= PFEN; /* Prefetch Enable */ 3565 if (np->features & FE_DFS) 3566 np->rv_ctest5 |= DFS; /* Dma Fifo Size */ 3567 if (np->features & FE_DIFF) 3568 np->rv_stest2 |= 0x20; /* Differential mode */ 3569 ncr_init_burst(np, np->maxburst); /* Max dwords burst length */ 3570 } else { 3571 np->maxburst = 3572 burst_code(np->rv_dmode, np->rv_ctest4, np->rv_ctest5); 3573 } 3574 3575 /* 3576 ** Get on-chip SRAM address, if supported 3577 */ 3578 if ((np->features & FE_RAM) && sizeof(struct script) <= 4096) { 3579 np->sram_rid = 0x18; 3580 np->sram_res = bus_alloc_resource(dev, SYS_RES_MEMORY, 3581 &np->sram_rid, 3582 0, ~0, 1, RF_ACTIVE); 3583 } 3584 3585 /* 3586 ** Allocate structure for script relocation. 3587 */ 3588 if (np->sram_res != NULL) { 3589 np->script = NULL; 3590 np->p_script = rman_get_start(np->sram_res); 3591 np->bst2 = rman_get_bustag(np->sram_res); 3592 np->bsh2 = rman_get_bushandle(np->sram_res); 3593 } else if (sizeof (struct script) > PAGE_SIZE) { 3594 np->script = (struct script*) kmem_alloc_contig 3595 (round_page(sizeof (struct script)), 3596 0, 0xffffffff, PAGE_SIZE); 3597 } else { 3598 np->script = (struct script *) 3599 kmalloc (sizeof (struct script), M_DEVBUF, M_WAITOK); 3600 } 3601 3602 /* XXX JGibbs - Use contigmalloc */ 3603 if (sizeof (struct scripth) > PAGE_SIZE) { 3604 np->scripth = (struct scripth*) kmem_alloc_contig 3605 (round_page(sizeof (struct scripth)), 3606 0, 0xffffffff, PAGE_SIZE); 3607 } else 3608 { 3609 np->scripth = (struct scripth *) 3610 kmalloc (sizeof (struct scripth), M_DEVBUF, M_WAITOK); 3611 } 3612 3613 #ifdef SCSI_NCR_PCI_CONFIG_FIXUP 3614 /* 3615 ** If cache line size is enabled, check PCI config space and 3616 ** try to fix it up if necessary. 3617 */ 3618 #ifdef PCIR_CACHELNSZ /* To be sure that new PCI stuff is present */ 3619 { 3620 u_char cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 3621 u_short command = pci_read_config(dev, PCIR_COMMAND, 2); 3622 3623 if (!cachelnsz) { 3624 cachelnsz = 8; 3625 kprintf("%s: setting PCI cache line size register to %d.\n", 3626 ncr_name(np), (int)cachelnsz); 3627 pci_write_config(dev, PCIR_CACHELNSZ, cachelnsz, 1); 3628 } 3629 3630 if (!(command & (1<<4))) { 3631 command |= (1<<4); 3632 kprintf("%s: setting PCI command write and invalidate.\n", 3633 ncr_name(np)); 3634 pci_write_config(dev, PCIR_COMMAND, command, 2); 3635 } 3636 } 3637 #endif /* PCIR_CACHELNSZ */ 3638 3639 #endif /* SCSI_NCR_PCI_CONFIG_FIXUP */ 3640 3641 /* Initialize per-target user settings */ 3642 usrsync = 0; 3643 if (SCSI_NCR_DFLT_SYNC) { 3644 usrsync = SCSI_NCR_DFLT_SYNC; 3645 if (usrsync > np->maxsync) 3646 usrsync = np->maxsync; 3647 if (usrsync < np->minsync) 3648 usrsync = np->minsync; 3649 } 3650 3651 usrwide = (SCSI_NCR_MAX_WIDE); 3652 if (usrwide > np->maxwide) usrwide=np->maxwide; 3653 3654 for (i=0;i<MAX_TARGET;i++) { 3655 tcb_p tp = &np->target[i]; 3656 3657 tp->tinfo.user.period = usrsync; 3658 tp->tinfo.user.offset = usrsync != 0 ? np->maxoffs : 0; 3659 tp->tinfo.user.width = usrwide; 3660 tp->tinfo.disc_tag = NCR_CUR_DISCENB 3661 | NCR_CUR_TAGENB 3662 | NCR_USR_DISCENB 3663 | NCR_USR_TAGENB; 3664 } 3665 3666 /* 3667 ** Bells and whistles ;-) 3668 */ 3669 if (bootverbose) 3670 kprintf("%s: minsync=%d, maxsync=%d, maxoffs=%d, %d dwords burst, %s dma fifo\n", 3671 ncr_name(np), np->minsync, np->maxsync, np->maxoffs, 3672 burst_length(np->maxburst), 3673 (np->rv_ctest5 & DFS) ? "large" : "normal"); 3674 3675 /* 3676 ** Print some complementary information that can be helpfull. 3677 */ 3678 if (bootverbose) 3679 kprintf("%s: %s, %s IRQ driver%s\n", 3680 ncr_name(np), 3681 np->rv_stest2 & 0x20 ? "differential" : "single-ended", 3682 np->rv_dcntl & IRQM ? "totem pole" : "open drain", 3683 np->sram_res ? ", using on-chip SRAM" : ""); 3684 3685 /* 3686 ** Patch scripts to physical addresses 3687 */ 3688 ncr_script_fill (&script0, &scripth0); 3689 3690 if (np->script) 3691 np->p_script = vtophys(np->script); 3692 np->p_scripth = vtophys(np->scripth); 3693 3694 ncr_script_copy_and_bind (np, (ncrcmd *) &script0, 3695 (ncrcmd *) np->script, sizeof(struct script)); 3696 3697 ncr_script_copy_and_bind (np, (ncrcmd *) &scripth0, 3698 (ncrcmd *) np->scripth, sizeof(struct scripth)); 3699 3700 /* 3701 ** Patch the script for LED support. 3702 */ 3703 3704 if (np->features & FE_LED0) { 3705 WRITESCRIPT(reselect[0], SCR_REG_REG(gpreg, SCR_OR, 0x01)); 3706 WRITESCRIPT(reselect1[0], SCR_REG_REG(gpreg, SCR_AND, 0xfe)); 3707 WRITESCRIPT(reselect2[0], SCR_REG_REG(gpreg, SCR_AND, 0xfe)); 3708 } 3709 3710 /* 3711 ** init data structure 3712 */ 3713 3714 np->jump_tcb.l_cmd = SCR_JUMP; 3715 np->jump_tcb.l_paddr = NCB_SCRIPTH_PHYS (np, abort); 3716 3717 /* 3718 ** Get SCSI addr of host adapter (set by bios?). 3719 */ 3720 3721 np->myaddr = INB(nc_scid) & 0x07; 3722 if (!np->myaddr) np->myaddr = SCSI_NCR_MYADDR; 3723 3724 #ifdef NCR_DUMP_REG 3725 /* 3726 ** Log the initial register contents 3727 */ 3728 { 3729 int reg; 3730 for (reg=0; reg<256; reg+=4) { 3731 if (reg%16==0) kprintf ("reg[%2x]", reg); 3732 kprintf (" %08x", (int)pci_conf_read (config_id, reg)); 3733 if (reg%16==12) kprintf ("\n"); 3734 } 3735 } 3736 #endif /* NCR_DUMP_REG */ 3737 3738 /* 3739 ** Reset chip. 3740 */ 3741 3742 OUTB (nc_istat, SRST); 3743 DELAY (1000); 3744 OUTB (nc_istat, 0 ); 3745 3746 3747 /* 3748 ** Now check the cache handling of the pci chipset. 3749 */ 3750 3751 if (ncr_snooptest (np)) { 3752 kprintf ("CACHE INCORRECTLY CONFIGURED.\n"); 3753 return EINVAL; 3754 } 3755 3756 /* 3757 ** Install the interrupt handler. 3758 */ 3759 3760 rid = 0; 3761 np->irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, 3762 RF_SHAREABLE | RF_ACTIVE); 3763 if (np->irq_res == NULL) { 3764 device_printf(dev, 3765 "interruptless mode: reduced performance.\n"); 3766 } else { 3767 bus_setup_intr(dev, np->irq_res, 0, 3768 ncr_intr, np, &np->irq_handle, NULL); 3769 } 3770 3771 /* 3772 ** Create the device queue. We only allow MAX_START-1 concurrent 3773 ** transactions so we can be sure to have one element free in our 3774 ** start queue to reset to the idle loop. 3775 */ 3776 devq = cam_simq_alloc(MAX_START - 1); 3777 if (devq == NULL) 3778 return ENOMEM; 3779 3780 /* 3781 ** Now tell the generic SCSI layer 3782 ** about our bus. 3783 */ 3784 np->sim = cam_sim_alloc(ncr_action, ncr_poll, "ncr", np, np->unit, 3785 &sim_mplock, 1, MAX_TAGS, devq); 3786 cam_simq_release(devq); 3787 if (np->sim == NULL) 3788 return ENOMEM; 3789 3790 3791 if (xpt_bus_register(np->sim, 0) != CAM_SUCCESS) { 3792 cam_sim_free(np->sim); 3793 return ENOMEM; 3794 } 3795 3796 if (xpt_create_path(&np->path, /*periph*/NULL, 3797 cam_sim_path(np->sim), CAM_TARGET_WILDCARD, 3798 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 3799 xpt_bus_deregister(cam_sim_path(np->sim)); 3800 cam_sim_free(np->sim); 3801 return ENOMEM; 3802 } 3803 3804 /* 3805 ** start the timeout daemon 3806 */ 3807 callout_init(&np->timeout_ch); 3808 ncr_timeout (np); 3809 np->lasttime=0; 3810 3811 return 0; 3812 } 3813 3814 /*========================================================== 3815 ** 3816 ** 3817 ** Process pending device interrupts. 3818 ** 3819 ** 3820 **========================================================== 3821 */ 3822 3823 static void 3824 ncr_intr(void *vnp) 3825 { 3826 ncb_p np = vnp; 3827 crit_enter(); 3828 3829 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("["); 3830 3831 if (INB(nc_istat) & (INTF|SIP|DIP)) { 3832 /* 3833 ** Repeat until no outstanding ints 3834 */ 3835 do { 3836 ncr_exception (np); 3837 } while (INB(nc_istat) & (INTF|SIP|DIP)); 3838 3839 np->ticks = 100; 3840 } 3841 3842 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("]\n"); 3843 3844 crit_exit(); 3845 } 3846 3847 /*========================================================== 3848 ** 3849 ** 3850 ** Start execution of a SCSI command. 3851 ** This is called from the generic SCSI driver. 3852 ** 3853 ** 3854 **========================================================== 3855 */ 3856 3857 static void 3858 ncr_action (struct cam_sim *sim, union ccb *ccb) 3859 { 3860 ncb_p np; 3861 3862 np = (ncb_p) cam_sim_softc(sim); 3863 3864 switch (ccb->ccb_h.func_code) { 3865 /* Common cases first */ 3866 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 3867 { 3868 nccb_p cp; 3869 lcb_p lp; 3870 tcb_p tp; 3871 struct ccb_scsiio *csio; 3872 u_int8_t *msgptr; 3873 u_int msglen; 3874 u_int msglen2; 3875 int segments; 3876 u_int8_t nego; 3877 u_int8_t idmsg; 3878 int qidx; 3879 3880 tp = &np->target[ccb->ccb_h.target_id]; 3881 csio = &ccb->csio; 3882 3883 crit_enter(); 3884 3885 /* 3886 * Last time we need to check if this CCB needs to 3887 * be aborted. 3888 */ 3889 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { 3890 xpt_done(ccb); 3891 crit_exit(); 3892 return; 3893 } 3894 ccb->ccb_h.status |= CAM_SIM_QUEUED; 3895 3896 /*--------------------------------------------------- 3897 ** 3898 ** Assign an nccb / bind ccb 3899 ** 3900 **---------------------------------------------------- 3901 */ 3902 cp = ncr_get_nccb (np, ccb->ccb_h.target_id, 3903 ccb->ccb_h.target_lun); 3904 if (cp == NULL) { 3905 /* XXX JGibbs - Freeze SIMQ */ 3906 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 3907 xpt_done(ccb); 3908 crit_exit(); 3909 return; 3910 } 3911 3912 cp->ccb = ccb; 3913 3914 /*--------------------------------------------------- 3915 ** 3916 ** timestamp 3917 ** 3918 **---------------------------------------------------- 3919 */ 3920 /* 3921 ** XXX JGibbs - Isn't this expensive 3922 ** enough to be conditionalized?? 3923 */ 3924 3925 bzero (&cp->phys.header.stamp, sizeof (struct tstamp)); 3926 cp->phys.header.stamp.start = ticks; 3927 3928 nego = 0; 3929 if (tp->nego_cp == NULL) { 3930 3931 if (tp->tinfo.current.width 3932 != tp->tinfo.goal.width) { 3933 tp->nego_cp = cp; 3934 nego = NS_WIDE; 3935 } else if ((tp->tinfo.current.period 3936 != tp->tinfo.goal.period) 3937 || (tp->tinfo.current.offset 3938 != tp->tinfo.goal.offset)) { 3939 tp->nego_cp = cp; 3940 nego = NS_SYNC; 3941 } 3942 } 3943 3944 /*--------------------------------------------------- 3945 ** 3946 ** choose a new tag ... 3947 ** 3948 **---------------------------------------------------- 3949 */ 3950 lp = tp->lp[ccb->ccb_h.target_lun]; 3951 3952 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 3953 && (ccb->csio.tag_action != CAM_TAG_ACTION_NONE) 3954 && (nego == 0)) { 3955 /* 3956 ** assign a tag to this nccb 3957 */ 3958 while (!cp->tag) { 3959 nccb_p cp2 = lp->next_nccb; 3960 lp->lasttag = lp->lasttag % 255 + 1; 3961 while (cp2 && cp2->tag != lp->lasttag) 3962 cp2 = cp2->next_nccb; 3963 if (cp2) continue; 3964 cp->tag=lp->lasttag; 3965 if (DEBUG_FLAGS & DEBUG_TAGS) { 3966 PRINT_ADDR(ccb); 3967 kprintf ("using tag #%d.\n", cp->tag); 3968 } 3969 } 3970 } else { 3971 cp->tag=0; 3972 } 3973 3974 /*---------------------------------------------------- 3975 ** 3976 ** Build the identify / tag / sdtr message 3977 ** 3978 **---------------------------------------------------- 3979 */ 3980 idmsg = MSG_IDENTIFYFLAG | ccb->ccb_h.target_lun; 3981 if (tp->tinfo.disc_tag & NCR_CUR_DISCENB) 3982 idmsg |= MSG_IDENTIFY_DISCFLAG; 3983 3984 msgptr = cp->scsi_smsg; 3985 msglen = 0; 3986 msgptr[msglen++] = idmsg; 3987 3988 if (cp->tag) { 3989 msgptr[msglen++] = ccb->csio.tag_action; 3990 msgptr[msglen++] = cp->tag; 3991 } 3992 3993 switch (nego) { 3994 case NS_SYNC: 3995 msgptr[msglen++] = MSG_EXTENDED; 3996 msgptr[msglen++] = MSG_EXT_SDTR_LEN; 3997 msgptr[msglen++] = MSG_EXT_SDTR; 3998 msgptr[msglen++] = tp->tinfo.goal.period; 3999 msgptr[msglen++] = tp->tinfo.goal.offset; 4000 if (DEBUG_FLAGS & DEBUG_NEGO) { 4001 PRINT_ADDR(ccb); 4002 kprintf ("sync msgout: "); 4003 ncr_show_msg (&cp->scsi_smsg [msglen-5]); 4004 kprintf (".\n"); 4005 }; 4006 break; 4007 case NS_WIDE: 4008 msgptr[msglen++] = MSG_EXTENDED; 4009 msgptr[msglen++] = MSG_EXT_WDTR_LEN; 4010 msgptr[msglen++] = MSG_EXT_WDTR; 4011 msgptr[msglen++] = tp->tinfo.goal.width; 4012 if (DEBUG_FLAGS & DEBUG_NEGO) { 4013 PRINT_ADDR(ccb); 4014 kprintf ("wide msgout: "); 4015 ncr_show_msg (&cp->scsi_smsg [msglen-4]); 4016 kprintf (".\n"); 4017 }; 4018 break; 4019 } 4020 4021 /*---------------------------------------------------- 4022 ** 4023 ** Build the identify message for getcc. 4024 ** 4025 **---------------------------------------------------- 4026 */ 4027 4028 cp->scsi_smsg2 [0] = idmsg; 4029 msglen2 = 1; 4030 4031 /*---------------------------------------------------- 4032 ** 4033 ** Build the data descriptors 4034 ** 4035 **---------------------------------------------------- 4036 */ 4037 4038 /* XXX JGibbs - Handle other types of I/O */ 4039 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 4040 segments = ncr_scatter(&cp->phys, 4041 (vm_offset_t)csio->data_ptr, 4042 (vm_size_t)csio->dxfer_len); 4043 4044 if (segments < 0) { 4045 ccb->ccb_h.status = CAM_REQ_TOO_BIG; 4046 ncr_free_nccb(np, cp); 4047 crit_exit(); 4048 xpt_done(ccb); 4049 return; 4050 } 4051 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 4052 cp->phys.header.savep = NCB_SCRIPT_PHYS (np, data_in); 4053 cp->phys.header.goalp = cp->phys.header.savep +20 +segments*16; 4054 } else { /* CAM_DIR_OUT */ 4055 cp->phys.header.savep = NCB_SCRIPT_PHYS (np, data_out); 4056 cp->phys.header.goalp = cp->phys.header.savep +20 +segments*16; 4057 } 4058 } else { 4059 cp->phys.header.savep = NCB_SCRIPT_PHYS (np, no_data); 4060 cp->phys.header.goalp = cp->phys.header.savep; 4061 } 4062 4063 cp->phys.header.lastp = cp->phys.header.savep; 4064 4065 4066 /*---------------------------------------------------- 4067 ** 4068 ** fill in nccb 4069 ** 4070 **---------------------------------------------------- 4071 ** 4072 ** 4073 ** physical -> virtual backlink 4074 ** Generic SCSI command 4075 */ 4076 cp->phys.header.cp = cp; 4077 /* 4078 ** Startqueue 4079 */ 4080 cp->phys.header.launch.l_paddr = NCB_SCRIPT_PHYS (np, select); 4081 cp->phys.header.launch.l_cmd = SCR_JUMP; 4082 /* 4083 ** select 4084 */ 4085 cp->phys.select.sel_id = ccb->ccb_h.target_id; 4086 cp->phys.select.sel_scntl3 = tp->tinfo.wval; 4087 cp->phys.select.sel_sxfer = tp->tinfo.sval; 4088 /* 4089 ** message 4090 */ 4091 cp->phys.smsg.addr = CCB_PHYS (cp, scsi_smsg); 4092 cp->phys.smsg.size = msglen; 4093 4094 cp->phys.smsg2.addr = CCB_PHYS (cp, scsi_smsg2); 4095 cp->phys.smsg2.size = msglen2; 4096 /* 4097 ** command 4098 */ 4099 /* XXX JGibbs - Support other command types */ 4100 cp->phys.cmd.addr = vtophys (csio->cdb_io.cdb_bytes); 4101 cp->phys.cmd.size = csio->cdb_len; 4102 /* 4103 ** sense command 4104 */ 4105 cp->phys.scmd.addr = CCB_PHYS (cp, sensecmd); 4106 cp->phys.scmd.size = 6; 4107 /* 4108 ** patch requested size into sense command 4109 */ 4110 cp->sensecmd[0] = 0x03; 4111 cp->sensecmd[1] = ccb->ccb_h.target_lun << 5; 4112 cp->sensecmd[4] = sizeof(struct scsi_sense_data); 4113 cp->sensecmd[4] = csio->sense_len; 4114 /* 4115 ** sense data 4116 */ 4117 cp->phys.sense.addr = vtophys (&csio->sense_data); 4118 cp->phys.sense.size = csio->sense_len; 4119 /* 4120 ** status 4121 */ 4122 cp->actualquirks = QUIRK_NOMSG; 4123 cp->host_status = nego ? HS_NEGOTIATE : HS_BUSY; 4124 cp->s_status = SCSI_STATUS_ILLEGAL; 4125 cp->parity_status = 0; 4126 4127 cp->xerr_status = XE_OK; 4128 cp->sync_status = tp->tinfo.sval; 4129 cp->nego_status = nego; 4130 cp->wide_status = tp->tinfo.wval; 4131 4132 /*---------------------------------------------------- 4133 ** 4134 ** Critical region: start this job. 4135 ** 4136 **---------------------------------------------------- 4137 */ 4138 4139 /* 4140 ** reselect pattern and activate this job. 4141 */ 4142 4143 cp->jump_nccb.l_cmd = (SCR_JUMP ^ IFFALSE (DATA (cp->tag))); 4144 cp->tlimit = time_uptime 4145 + ccb->ccb_h.timeout / 1000 + 2; 4146 cp->magic = CCB_MAGIC; 4147 4148 /* 4149 ** insert into start queue. 4150 */ 4151 4152 qidx = np->squeueput + 1; 4153 if (qidx >= MAX_START) 4154 qidx = 0; 4155 np->squeue [qidx ] = NCB_SCRIPT_PHYS (np, idle); 4156 np->squeue [np->squeueput] = CCB_PHYS (cp, phys); 4157 np->squeueput = qidx; 4158 4159 if(DEBUG_FLAGS & DEBUG_QUEUE) 4160 kprintf("%s: queuepos=%d tryoffset=%d.\n", 4161 ncr_name (np), np->squeueput, 4162 (unsigned)(READSCRIPT(startpos[0]) - 4163 (NCB_SCRIPTH_PHYS (np, tryloop)))); 4164 4165 /* 4166 ** Script processor may be waiting for reselect. 4167 ** Wake it up. 4168 */ 4169 OUTB (nc_istat, SIGP); 4170 4171 /* 4172 ** and reenable interrupts 4173 */ 4174 crit_exit(); 4175 break; 4176 } 4177 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 4178 case XPT_EN_LUN: /* Enable LUN as a target */ 4179 case XPT_TARGET_IO: /* Execute target I/O request */ 4180 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 4181 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 4182 case XPT_ABORT: /* Abort the specified CCB */ 4183 /* XXX Implement */ 4184 ccb->ccb_h.status = CAM_REQ_INVALID; 4185 xpt_done(ccb); 4186 break; 4187 case XPT_SET_TRAN_SETTINGS: 4188 { 4189 struct ccb_trans_settings *cts = &ccb->cts; 4190 tcb_p tp; 4191 u_int update_type; 4192 struct ccb_trans_settings_scsi *scsi = 4193 &cts->proto_specific.scsi; 4194 struct ccb_trans_settings_spi *spi = 4195 &cts->xport_specific.spi; 4196 4197 update_type = 0; 4198 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 4199 update_type |= NCR_TRANS_GOAL; 4200 if (cts->type == CTS_TYPE_USER_SETTINGS) 4201 update_type |= NCR_TRANS_USER; 4202 4203 crit_enter(); 4204 tp = &np->target[ccb->ccb_h.target_id]; 4205 /* Tag and disc enables */ 4206 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { 4207 if (update_type & NCR_TRANS_GOAL) { 4208 if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) 4209 tp->tinfo.disc_tag |= NCR_CUR_DISCENB; 4210 else 4211 tp->tinfo.disc_tag &= ~NCR_CUR_DISCENB; 4212 } 4213 4214 if (update_type & NCR_TRANS_USER) { 4215 if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) 4216 tp->tinfo.disc_tag |= NCR_USR_DISCENB; 4217 else 4218 tp->tinfo.disc_tag &= ~NCR_USR_DISCENB; 4219 } 4220 4221 } 4222 4223 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 4224 if (update_type & NCR_TRANS_GOAL) { 4225 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 4226 tp->tinfo.disc_tag |= NCR_CUR_TAGENB; 4227 else 4228 tp->tinfo.disc_tag &= ~NCR_CUR_TAGENB; 4229 } 4230 4231 if (update_type & NCR_TRANS_USER) { 4232 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 4233 tp->tinfo.disc_tag |= NCR_USR_TAGENB; 4234 else 4235 tp->tinfo.disc_tag &= ~NCR_USR_TAGENB; 4236 } 4237 } 4238 4239 /* Filter bus width and sync negotiation settings */ 4240 if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) { 4241 if (spi->bus_width > np->maxwide) 4242 spi->bus_width = np->maxwide; 4243 } 4244 4245 if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 4246 || ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) { 4247 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) { 4248 if (spi->sync_period != 0 4249 && (spi->sync_period < np->minsync)) 4250 spi->sync_period = np->minsync; 4251 } 4252 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) { 4253 if (spi->sync_offset == 0) 4254 spi->sync_period = 0; 4255 if (spi->sync_offset > np->maxoffs) 4256 spi->sync_offset = np->maxoffs; 4257 } 4258 } 4259 if ((update_type & NCR_TRANS_USER) != 0) { 4260 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 4261 tp->tinfo.user.period = spi->sync_period; 4262 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) 4263 tp->tinfo.user.offset = spi->sync_offset; 4264 if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) 4265 tp->tinfo.user.width = spi->bus_width; 4266 } 4267 if ((update_type & NCR_TRANS_GOAL) != 0) { 4268 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 4269 tp->tinfo.goal.period = spi->sync_period; 4270 4271 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) 4272 tp->tinfo.goal.offset = spi->sync_offset; 4273 4274 if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) 4275 tp->tinfo.goal.width = spi->bus_width; 4276 } 4277 crit_exit(); 4278 ccb->ccb_h.status = CAM_REQ_CMP; 4279 xpt_done(ccb); 4280 break; 4281 } 4282 case XPT_GET_TRAN_SETTINGS: 4283 /* Get default/user set transfer settings for the target */ 4284 { 4285 struct ccb_trans_settings *cts = &ccb->cts; 4286 struct ncr_transinfo *tinfo; 4287 tcb_p tp = &np->target[ccb->ccb_h.target_id]; 4288 struct ccb_trans_settings_scsi *scsi = 4289 &cts->proto_specific.scsi; 4290 struct ccb_trans_settings_spi *spi = 4291 &cts->xport_specific.spi; 4292 4293 cts->protocol = PROTO_SCSI; 4294 cts->protocol_version = SCSI_REV_2; 4295 cts->transport = XPORT_SPI; 4296 cts->transport_version = 2; 4297 4298 crit_enter(); 4299 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 4300 tinfo = &tp->tinfo.current; 4301 if (tp->tinfo.disc_tag & NCR_CUR_DISCENB) 4302 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 4303 else 4304 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 4305 4306 if (tp->tinfo.disc_tag & NCR_CUR_TAGENB) 4307 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 4308 else 4309 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 4310 } else { 4311 tinfo = &tp->tinfo.user; 4312 if (tp->tinfo.disc_tag & NCR_USR_DISCENB) 4313 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 4314 else 4315 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 4316 4317 if (tp->tinfo.disc_tag & NCR_USR_TAGENB) 4318 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 4319 else 4320 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 4321 } 4322 4323 spi->sync_period = tinfo->period; 4324 spi->sync_offset = tinfo->offset; 4325 spi->bus_width = tinfo->width; 4326 4327 crit_exit(); 4328 spi->valid = CTS_SPI_VALID_SYNC_RATE 4329 | CTS_SPI_VALID_SYNC_OFFSET 4330 | CTS_SPI_VALID_BUS_WIDTH 4331 | CTS_SPI_VALID_DISC; 4332 scsi->valid = CTS_SCSI_VALID_TQ; 4333 4334 ccb->ccb_h.status = CAM_REQ_CMP; 4335 xpt_done(ccb); 4336 break; 4337 } 4338 case XPT_CALC_GEOMETRY: 4339 { 4340 struct ccb_calc_geometry *ccg; 4341 u_int32_t size_mb; 4342 u_int32_t secs_per_cylinder; 4343 int extended; 4344 4345 /* XXX JGibbs - I'm sure the NCR uses a different strategy, 4346 * but it should be able to deal with Adaptec 4347 * geometry too. 4348 */ 4349 extended = 1; 4350 ccg = &ccb->ccg; 4351 size_mb = ccg->volume_size 4352 / ((1024L * 1024L) / ccg->block_size); 4353 4354 if (size_mb > 1024 && extended) { 4355 ccg->heads = 255; 4356 ccg->secs_per_track = 63; 4357 } else { 4358 ccg->heads = 64; 4359 ccg->secs_per_track = 32; 4360 } 4361 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 4362 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 4363 ccb->ccb_h.status = CAM_REQ_CMP; 4364 xpt_done(ccb); 4365 break; 4366 } 4367 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 4368 { 4369 OUTB (nc_scntl1, CRST); 4370 ccb->ccb_h.status = CAM_REQ_CMP; 4371 DELAY(10000); /* Wait until our interrupt handler sees it */ 4372 xpt_done(ccb); 4373 break; 4374 } 4375 case XPT_TERM_IO: /* Terminate the I/O process */ 4376 /* XXX Implement */ 4377 ccb->ccb_h.status = CAM_REQ_INVALID; 4378 xpt_done(ccb); 4379 break; 4380 case XPT_PATH_INQ: /* Path routing inquiry */ 4381 { 4382 struct ccb_pathinq *cpi = &ccb->cpi; 4383 4384 cpi->version_num = 1; /* XXX??? */ 4385 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 4386 if ((np->features & FE_WIDE) != 0) 4387 cpi->hba_inquiry |= PI_WIDE_16; 4388 cpi->target_sprt = 0; 4389 cpi->hba_misc = 0; 4390 cpi->hba_eng_cnt = 0; 4391 cpi->max_target = (np->features & FE_WIDE) ? 15 : 7; 4392 cpi->max_lun = MAX_LUN - 1; 4393 cpi->initiator_id = np->myaddr; 4394 cpi->bus_id = cam_sim_bus(sim); 4395 cpi->base_transfer_speed = 3300; 4396 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 4397 strncpy(cpi->hba_vid, "Symbios", HBA_IDLEN); 4398 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 4399 cpi->unit_number = cam_sim_unit(sim); 4400 cpi->transport = XPORT_SPI; 4401 cpi->transport_version = 2; 4402 cpi->protocol = PROTO_SCSI; 4403 cpi->protocol_version = SCSI_REV_2; 4404 cpi->ccb_h.status = CAM_REQ_CMP; 4405 xpt_done(ccb); 4406 break; 4407 } 4408 default: 4409 ccb->ccb_h.status = CAM_REQ_INVALID; 4410 xpt_done(ccb); 4411 break; 4412 } 4413 } 4414 4415 /*========================================================== 4416 ** 4417 ** 4418 ** Complete execution of a SCSI command. 4419 ** Signal completion to the generic SCSI driver. 4420 ** 4421 ** 4422 **========================================================== 4423 */ 4424 4425 void 4426 ncr_complete (ncb_p np, nccb_p cp) 4427 { 4428 union ccb *ccb; 4429 tcb_p tp; 4430 4431 /* 4432 ** Sanity check 4433 */ 4434 4435 if (!cp || (cp->magic!=CCB_MAGIC) || !cp->ccb) return; 4436 cp->magic = 1; 4437 cp->tlimit= 0; 4438 4439 /* 4440 ** No Reselect anymore. 4441 */ 4442 cp->jump_nccb.l_cmd = (SCR_JUMP); 4443 4444 /* 4445 ** No starting. 4446 */ 4447 cp->phys.header.launch.l_paddr= NCB_SCRIPT_PHYS (np, idle); 4448 4449 /* 4450 ** timestamp 4451 */ 4452 ncb_profile (np, cp); 4453 4454 if (DEBUG_FLAGS & DEBUG_TINY) 4455 kprintf ("CCB=%x STAT=%x/%x\n", (int)(intptr_t)cp & 0xfff, 4456 cp->host_status,cp->s_status); 4457 4458 ccb = cp->ccb; 4459 cp->ccb = NULL; 4460 tp = &np->target[ccb->ccb_h.target_id]; 4461 4462 /* 4463 ** We do not queue more than 1 nccb per target 4464 ** with negotiation at any time. If this nccb was 4465 ** used for negotiation, clear this info in the tcb. 4466 */ 4467 4468 if (cp == tp->nego_cp) 4469 tp->nego_cp = NULL; 4470 4471 /* 4472 ** Check for parity errors. 4473 */ 4474 /* XXX JGibbs - What about reporting them??? */ 4475 4476 if (cp->parity_status) { 4477 PRINT_ADDR(ccb); 4478 kprintf ("%d parity error(s), fallback.\n", cp->parity_status); 4479 /* 4480 ** fallback to asynch transfer. 4481 */ 4482 tp->tinfo.goal.period = 0; 4483 tp->tinfo.goal.offset = 0; 4484 } 4485 4486 /* 4487 ** Check for extended errors. 4488 */ 4489 4490 if (cp->xerr_status != XE_OK) { 4491 PRINT_ADDR(ccb); 4492 switch (cp->xerr_status) { 4493 case XE_EXTRA_DATA: 4494 kprintf ("extraneous data discarded.\n"); 4495 break; 4496 case XE_BAD_PHASE: 4497 kprintf ("illegal scsi phase (4/5).\n"); 4498 break; 4499 default: 4500 kprintf ("extended error %d.\n", cp->xerr_status); 4501 break; 4502 } 4503 if (cp->host_status==HS_COMPLETE) 4504 cp->host_status = HS_FAIL; 4505 } 4506 4507 /* 4508 ** Check the status. 4509 */ 4510 if (cp->host_status == HS_COMPLETE) { 4511 4512 if (cp->s_status == SCSI_STATUS_OK) { 4513 4514 /* 4515 ** All went well. 4516 */ 4517 /* XXX JGibbs - Properly calculate residual */ 4518 4519 tp->bytes += ccb->csio.dxfer_len; 4520 tp->transfers ++; 4521 4522 ccb->ccb_h.status = CAM_REQ_CMP; 4523 } else if ((cp->s_status & SCSI_STATUS_SENSE) != 0) { 4524 4525 /* 4526 * XXX Could be TERMIO too. Should record 4527 * original status. 4528 */ 4529 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 4530 cp->s_status &= ~SCSI_STATUS_SENSE; 4531 if (cp->s_status == SCSI_STATUS_OK) { 4532 ccb->ccb_h.status = 4533 CAM_AUTOSNS_VALID|CAM_SCSI_STATUS_ERROR; 4534 } else { 4535 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 4536 } 4537 } else { 4538 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; 4539 ccb->csio.scsi_status = cp->s_status; 4540 } 4541 4542 4543 } else if (cp->host_status == HS_SEL_TIMEOUT) { 4544 4545 /* 4546 ** Device failed selection 4547 */ 4548 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 4549 4550 } else if (cp->host_status == HS_TIMEOUT) { 4551 4552 /* 4553 ** No response 4554 */ 4555 ccb->ccb_h.status = CAM_CMD_TIMEOUT; 4556 } else if (cp->host_status == HS_STALL) { 4557 ccb->ccb_h.status = CAM_REQUEUE_REQ; 4558 } else { 4559 4560 /* 4561 ** Other protocol messes 4562 */ 4563 PRINT_ADDR(ccb); 4564 kprintf ("COMMAND FAILED (%x %x) @%p.\n", 4565 cp->host_status, cp->s_status, cp); 4566 4567 ccb->ccb_h.status = CAM_CMD_TIMEOUT; 4568 } 4569 4570 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 4571 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 4572 ccb->ccb_h.status |= CAM_DEV_QFRZN; 4573 } 4574 4575 /* 4576 ** Free this nccb 4577 */ 4578 ncr_free_nccb (np, cp); 4579 4580 /* 4581 ** signal completion to generic driver. 4582 */ 4583 xpt_done (ccb); 4584 } 4585 4586 /*========================================================== 4587 ** 4588 ** 4589 ** Signal all (or one) control block done. 4590 ** 4591 ** 4592 **========================================================== 4593 */ 4594 4595 void 4596 ncr_wakeup (ncb_p np, u_long code) 4597 { 4598 /* 4599 ** Starting at the default nccb and following 4600 ** the links, complete all jobs with a 4601 ** host_status greater than "disconnect". 4602 ** 4603 ** If the "code" parameter is not zero, 4604 ** complete all jobs that are not IDLE. 4605 */ 4606 4607 nccb_p cp = np->link_nccb; 4608 while (cp) { 4609 switch (cp->host_status) { 4610 4611 case HS_IDLE: 4612 break; 4613 4614 case HS_DISCONNECT: 4615 if(DEBUG_FLAGS & DEBUG_TINY) kprintf ("D"); 4616 /* fall through */ 4617 4618 case HS_BUSY: 4619 case HS_NEGOTIATE: 4620 if (!code) break; 4621 cp->host_status = code; 4622 4623 /* fall through */ 4624 4625 default: 4626 ncr_complete (np, cp); 4627 break; 4628 } 4629 cp = cp -> link_nccb; 4630 } 4631 } 4632 4633 static void 4634 ncr_freeze_devq (ncb_p np, struct cam_path *path) 4635 { 4636 nccb_p cp; 4637 int i; 4638 int count; 4639 int firstskip; 4640 /* 4641 ** Starting at the first nccb and following 4642 ** the links, complete all jobs that match 4643 ** the passed in path and are in the start queue. 4644 */ 4645 4646 cp = np->link_nccb; 4647 count = 0; 4648 firstskip = 0; 4649 while (cp) { 4650 switch (cp->host_status) { 4651 4652 case HS_BUSY: 4653 case HS_NEGOTIATE: 4654 if ((cp->phys.header.launch.l_paddr 4655 == NCB_SCRIPT_PHYS (np, select)) 4656 && (xpt_path_comp(path, cp->ccb->ccb_h.path) >= 0)) { 4657 4658 /* Mark for removal from the start queue */ 4659 for (i = 1; i < MAX_START; i++) { 4660 int idx; 4661 4662 idx = np->squeueput - i; 4663 4664 if (idx < 0) 4665 idx = MAX_START + idx; 4666 if (np->squeue[idx] 4667 == CCB_PHYS(cp, phys)) { 4668 np->squeue[idx] = 4669 NCB_SCRIPT_PHYS (np, skip); 4670 if (i > firstskip) 4671 firstskip = i; 4672 break; 4673 } 4674 } 4675 cp->host_status=HS_STALL; 4676 ncr_complete (np, cp); 4677 count++; 4678 } 4679 break; 4680 default: 4681 break; 4682 } 4683 cp = cp->link_nccb; 4684 } 4685 4686 if (count > 0) { 4687 int j; 4688 int bidx; 4689 4690 /* Compress the start queue */ 4691 j = 0; 4692 bidx = np->squeueput; 4693 i = np->squeueput - firstskip; 4694 if (i < 0) 4695 i = MAX_START + i; 4696 for (;;) { 4697 4698 bidx = i - j; 4699 if (bidx < 0) 4700 bidx = MAX_START + bidx; 4701 4702 if (np->squeue[i] == NCB_SCRIPT_PHYS (np, skip)) { 4703 j++; 4704 } else if (j != 0) { 4705 np->squeue[bidx] = np->squeue[i]; 4706 if (np->squeue[bidx] 4707 == NCB_SCRIPT_PHYS(np, idle)) 4708 break; 4709 } 4710 i = (i + 1) % MAX_START; 4711 } 4712 np->squeueput = bidx; 4713 } 4714 } 4715 4716 /*========================================================== 4717 ** 4718 ** 4719 ** Start NCR chip. 4720 ** 4721 ** 4722 **========================================================== 4723 */ 4724 4725 void 4726 ncr_init(ncb_p np, char * msg, u_long code) 4727 { 4728 int i; 4729 4730 /* 4731 ** Reset chip. 4732 */ 4733 4734 OUTB (nc_istat, SRST); 4735 DELAY (1000); 4736 OUTB (nc_istat, 0); 4737 4738 /* 4739 ** Message. 4740 */ 4741 4742 if (msg) kprintf ("%s: restart (%s).\n", ncr_name (np), msg); 4743 4744 /* 4745 ** Clear Start Queue 4746 */ 4747 4748 for (i=0;i<MAX_START;i++) 4749 np -> squeue [i] = NCB_SCRIPT_PHYS (np, idle); 4750 4751 /* 4752 ** Start at first entry. 4753 */ 4754 4755 np->squeueput = 0; 4756 WRITESCRIPT(startpos[0], NCB_SCRIPTH_PHYS (np, tryloop)); 4757 WRITESCRIPT(start0 [0], SCR_INT ^ IFFALSE (0)); 4758 4759 /* 4760 ** Wakeup all pending jobs. 4761 */ 4762 4763 ncr_wakeup (np, code); 4764 4765 /* 4766 ** Init chip. 4767 */ 4768 4769 OUTB (nc_istat, 0x00 ); /* Remove Reset, abort ... */ 4770 OUTB (nc_scntl0, 0xca ); /* full arb., ena parity, par->ATN */ 4771 OUTB (nc_scntl1, 0x00 ); /* odd parity, and remove CRST!! */ 4772 ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */ 4773 OUTB (nc_scid , RRE|np->myaddr);/* host adapter SCSI address */ 4774 OUTW (nc_respid, 1ul<<np->myaddr);/* id to respond to */ 4775 OUTB (nc_istat , SIGP ); /* Signal Process */ 4776 OUTB (nc_dmode , np->rv_dmode); /* XXX modify burstlen ??? */ 4777 OUTB (nc_dcntl , np->rv_dcntl); 4778 OUTB (nc_ctest3, np->rv_ctest3); 4779 OUTB (nc_ctest5, np->rv_ctest5); 4780 OUTB (nc_ctest4, np->rv_ctest4);/* enable master parity checking */ 4781 OUTB (nc_stest2, np->rv_stest2|EXT); /* Extended Sreq/Sack filtering */ 4782 OUTB (nc_stest3, TE ); /* TolerANT enable */ 4783 OUTB (nc_stime0, 0x0b ); /* HTH = disabled, STO = 0.1 sec. */ 4784 4785 if (bootverbose >= 2) { 4786 kprintf ("\tACTUAL values:SCNTL3:%02x DMODE:%02x DCNTL:%02x\n", 4787 np->rv_scntl3, np->rv_dmode, np->rv_dcntl); 4788 kprintf ("\t CTEST3:%02x CTEST4:%02x CTEST5:%02x\n", 4789 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 4790 } 4791 4792 /* 4793 ** Enable GPIO0 pin for writing if LED support. 4794 */ 4795 4796 if (np->features & FE_LED0) { 4797 OUTOFFB (nc_gpcntl, 0x01); 4798 } 4799 4800 /* 4801 ** Fill in target structure. 4802 */ 4803 for (i=0;i<MAX_TARGET;i++) { 4804 tcb_p tp = &np->target[i]; 4805 4806 tp->tinfo.sval = 0; 4807 tp->tinfo.wval = np->rv_scntl3; 4808 4809 tp->tinfo.current.period = 0; 4810 tp->tinfo.current.offset = 0; 4811 tp->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT; 4812 } 4813 4814 /* 4815 ** enable ints 4816 */ 4817 4818 OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST); 4819 OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID); 4820 4821 /* 4822 ** Start script processor. 4823 */ 4824 4825 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, start)); 4826 4827 /* 4828 * Notify the XPT of the event 4829 */ 4830 if (code == HS_RESET) 4831 xpt_async(AC_BUS_RESET, np->path, NULL); 4832 } 4833 4834 static void 4835 ncr_poll(struct cam_sim *sim) 4836 { 4837 ncr_intr(cam_sim_softc(sim)); 4838 } 4839 4840 4841 /*========================================================== 4842 ** 4843 ** Get clock factor and sync divisor for a given 4844 ** synchronous factor period. 4845 ** Returns the clock factor (in sxfer) and scntl3 4846 ** synchronous divisor field. 4847 ** 4848 **========================================================== 4849 */ 4850 4851 static void ncr_getsync(ncb_p np, u_char sfac, u_char *fakp, u_char *scntl3p) 4852 { 4853 u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */ 4854 int div = np->clock_divn; /* Number of divisors supported */ 4855 u_long fak; /* Sync factor in sxfer */ 4856 u_long per; /* Period in tenths of ns */ 4857 u_long kpc; /* (per * clk) */ 4858 4859 /* 4860 ** Compute the synchronous period in tenths of nano-seconds 4861 */ 4862 if (sfac <= 10) per = 250; 4863 else if (sfac == 11) per = 303; 4864 else if (sfac == 12) per = 500; 4865 else per = 40 * sfac; 4866 4867 /* 4868 ** Look for the greatest clock divisor that allows an 4869 ** input speed faster than the period. 4870 */ 4871 kpc = per * clk; 4872 while (--div >= 0) 4873 if (kpc >= (div_10M[div] * 4)) break; 4874 4875 /* 4876 ** Calculate the lowest clock factor that allows an output 4877 ** speed not faster than the period. 4878 */ 4879 fak = (kpc - 1) / div_10M[div] + 1; 4880 4881 #if 0 /* You can #if 1 if you think this optimization is useful */ 4882 4883 per = (fak * div_10M[div]) / clk; 4884 4885 /* 4886 ** Why not to try the immediate lower divisor and to choose 4887 ** the one that allows the fastest output speed ? 4888 ** We dont want input speed too much greater than output speed. 4889 */ 4890 if (div >= 1 && fak < 6) { 4891 u_long fak2, per2; 4892 fak2 = (kpc - 1) / div_10M[div-1] + 1; 4893 per2 = (fak2 * div_10M[div-1]) / clk; 4894 if (per2 < per && fak2 <= 6) { 4895 fak = fak2; 4896 per = per2; 4897 --div; 4898 } 4899 } 4900 #endif 4901 4902 if (fak < 4) fak = 4; /* Should never happen, too bad ... */ 4903 4904 /* 4905 ** Compute and return sync parameters for the ncr 4906 */ 4907 *fakp = fak - 4; 4908 *scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0); 4909 } 4910 4911 /*========================================================== 4912 ** 4913 ** Switch sync mode for current job and its target 4914 ** 4915 **========================================================== 4916 */ 4917 4918 static void 4919 ncr_setsync(ncb_p np, nccb_p cp, u_char scntl3, u_char sxfer, u_char period) 4920 { 4921 union ccb *ccb; 4922 struct ccb_trans_settings neg; 4923 tcb_p tp; 4924 int div; 4925 u_int target = INB (nc_sdid) & 0x0f; 4926 u_int period_10ns; 4927 4928 assert (cp); 4929 if (!cp) return; 4930 4931 ccb = cp->ccb; 4932 assert (ccb); 4933 if (!ccb) return; 4934 assert (target == ccb->ccb_h.target_id); 4935 4936 tp = &np->target[target]; 4937 4938 if (!scntl3 || !(sxfer & 0x1f)) 4939 scntl3 = np->rv_scntl3; 4940 scntl3 = (scntl3 & 0xf0) | (tp->tinfo.wval & EWS) 4941 | (np->rv_scntl3 & 0x07); 4942 4943 /* 4944 ** Deduce the value of controller sync period from scntl3. 4945 ** period is in tenths of nano-seconds. 4946 */ 4947 4948 div = ((scntl3 >> 4) & 0x7); 4949 if ((sxfer & 0x1f) && div) 4950 period_10ns = 4951 (((sxfer>>5)+4)*div_10M[div-1])/np->clock_khz; 4952 else 4953 period_10ns = 0; 4954 4955 tp->tinfo.goal.period = period; 4956 tp->tinfo.goal.offset = sxfer & 0x1f; 4957 tp->tinfo.current.period = period; 4958 tp->tinfo.current.offset = sxfer & 0x1f; 4959 4960 /* 4961 ** Stop there if sync parameters are unchanged 4962 */ 4963 if (tp->tinfo.sval == sxfer && tp->tinfo.wval == scntl3) return; 4964 tp->tinfo.sval = sxfer; 4965 tp->tinfo.wval = scntl3; 4966 4967 if (sxfer & 0x1f) { 4968 /* 4969 ** Disable extended Sreq/Sack filtering 4970 */ 4971 if (period_10ns <= 2000) OUTOFFB (nc_stest2, EXT); 4972 } 4973 4974 /* 4975 ** Tell the SCSI layer about the 4976 ** new transfer parameters. 4977 */ 4978 memset(&neg, 0, sizeof (neg)); 4979 neg.protocol = PROTO_SCSI; 4980 neg.protocol_version = SCSI_REV_2; 4981 neg.transport = XPORT_SPI; 4982 neg.transport_version = 2; 4983 neg.xport_specific.spi.sync_period = period; 4984 neg.xport_specific.spi.sync_offset = sxfer & 0x1f; 4985 neg.xport_specific.spi.valid = CTS_SPI_VALID_SYNC_RATE 4986 | CTS_SPI_VALID_SYNC_OFFSET; 4987 xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path, 4988 /*priority*/1); 4989 xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg); 4990 4991 /* 4992 ** set actual value and sync_status 4993 */ 4994 OUTB (nc_sxfer, sxfer); 4995 np->sync_st = sxfer; 4996 OUTB (nc_scntl3, scntl3); 4997 np->wide_st = scntl3; 4998 4999 /* 5000 ** patch ALL nccbs of this target. 5001 */ 5002 for (cp = np->link_nccb; cp; cp = cp->link_nccb) { 5003 if (!cp->ccb) continue; 5004 if (cp->ccb->ccb_h.target_id != target) continue; 5005 cp->sync_status = sxfer; 5006 cp->wide_status = scntl3; 5007 } 5008 } 5009 5010 /*========================================================== 5011 ** 5012 ** Switch wide mode for current job and its target 5013 ** SCSI specs say: a SCSI device that accepts a WDTR 5014 ** message shall reset the synchronous agreement to 5015 ** asynchronous mode. 5016 ** 5017 **========================================================== 5018 */ 5019 5020 static void ncr_setwide (ncb_p np, nccb_p cp, u_char wide, u_char ack) 5021 { 5022 union ccb *ccb; 5023 struct ccb_trans_settings neg; 5024 u_int target = INB (nc_sdid) & 0x0f; 5025 tcb_p tp; 5026 u_char scntl3; 5027 u_char sxfer; 5028 5029 assert (cp); 5030 if (!cp) return; 5031 5032 ccb = cp->ccb; 5033 assert (ccb); 5034 if (!ccb) return; 5035 assert (target == ccb->ccb_h.target_id); 5036 5037 tp = &np->target[target]; 5038 tp->tinfo.current.width = wide; 5039 tp->tinfo.goal.width = wide; 5040 tp->tinfo.current.period = 0; 5041 tp->tinfo.current.offset = 0; 5042 5043 scntl3 = (tp->tinfo.wval & (~EWS)) | (wide ? EWS : 0); 5044 5045 sxfer = ack ? 0 : tp->tinfo.sval; 5046 5047 /* 5048 ** Stop there if sync/wide parameters are unchanged 5049 */ 5050 if (tp->tinfo.sval == sxfer && tp->tinfo.wval == scntl3) return; 5051 tp->tinfo.sval = sxfer; 5052 tp->tinfo.wval = scntl3; 5053 5054 /* Tell the SCSI layer about the new transfer params */ 5055 memset(&neg, 0, sizeof (neg)); 5056 neg.protocol = PROTO_SCSI; 5057 neg.protocol_version = SCSI_REV_2; 5058 neg.transport = XPORT_SPI; 5059 neg.transport_version = 2; 5060 neg.xport_specific.spi.bus_width = (scntl3 & EWS) ? 5061 MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT; 5062 neg.xport_specific.spi.sync_period = 0; 5063 neg.xport_specific.spi.sync_offset = 0; 5064 neg.xport_specific.spi.valid = CTS_SPI_VALID_SYNC_RATE 5065 | CTS_SPI_VALID_SYNC_OFFSET 5066 | CTS_SPI_VALID_BUS_WIDTH; 5067 xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path, /*priority*/1); 5068 xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg); 5069 5070 /* 5071 ** set actual value and sync_status 5072 */ 5073 OUTB (nc_sxfer, sxfer); 5074 np->sync_st = sxfer; 5075 OUTB (nc_scntl3, scntl3); 5076 np->wide_st = scntl3; 5077 5078 /* 5079 ** patch ALL nccbs of this target. 5080 */ 5081 for (cp = np->link_nccb; cp; cp = cp->link_nccb) { 5082 if (!cp->ccb) continue; 5083 if (cp->ccb->ccb_h.target_id != target) continue; 5084 cp->sync_status = sxfer; 5085 cp->wide_status = scntl3; 5086 } 5087 } 5088 5089 /*========================================================== 5090 ** 5091 ** 5092 ** ncr timeout handler. 5093 ** 5094 ** 5095 **========================================================== 5096 ** 5097 ** Misused to keep the driver running when 5098 ** interrupts are not configured correctly. 5099 ** 5100 **---------------------------------------------------------- 5101 */ 5102 5103 static void 5104 ncr_timeout (void *arg) 5105 { 5106 ncb_p np = arg; 5107 time_t thistime = time_uptime; 5108 ticks_t step = np->ticks; 5109 u_long count = 0; 5110 long t; 5111 nccb_p cp; 5112 5113 if (np->lasttime != thistime) { 5114 /* 5115 ** block ncr interrupts 5116 */ 5117 crit_enter(); 5118 np->lasttime = thistime; 5119 5120 /*---------------------------------------------------- 5121 ** 5122 ** handle ncr chip timeouts 5123 ** 5124 ** Assumption: 5125 ** We have a chance to arbitrate for the 5126 ** SCSI bus at least every 10 seconds. 5127 ** 5128 **---------------------------------------------------- 5129 */ 5130 5131 t = thistime - np->heartbeat; 5132 5133 if (t<2) np->latetime=0; else np->latetime++; 5134 5135 if (np->latetime>2) { 5136 /* 5137 ** If there are no requests, the script 5138 ** processor will sleep on SEL_WAIT_RESEL. 5139 ** But we have to check whether it died. 5140 ** Let's try to wake it up. 5141 */ 5142 OUTB (nc_istat, SIGP); 5143 } 5144 5145 /*---------------------------------------------------- 5146 ** 5147 ** handle nccb timeouts 5148 ** 5149 **---------------------------------------------------- 5150 */ 5151 5152 for (cp=np->link_nccb; cp; cp=cp->link_nccb) { 5153 /* 5154 ** look for timed out nccbs. 5155 */ 5156 if (!cp->host_status) continue; 5157 count++; 5158 if (cp->tlimit > thistime) continue; 5159 5160 /* 5161 ** Disable reselect. 5162 ** Remove it from startqueue. 5163 */ 5164 cp->jump_nccb.l_cmd = (SCR_JUMP); 5165 if (cp->phys.header.launch.l_paddr == 5166 NCB_SCRIPT_PHYS (np, select)) { 5167 kprintf ("%s: timeout nccb=%p (skip)\n", 5168 ncr_name (np), cp); 5169 cp->phys.header.launch.l_paddr 5170 = NCB_SCRIPT_PHYS (np, skip); 5171 } 5172 5173 switch (cp->host_status) { 5174 5175 case HS_BUSY: 5176 case HS_NEGOTIATE: 5177 /* fall through */ 5178 case HS_DISCONNECT: 5179 cp->host_status=HS_TIMEOUT; 5180 } 5181 cp->tag = 0; 5182 5183 /* 5184 ** wakeup this nccb. 5185 */ 5186 ncr_complete (np, cp); 5187 } 5188 crit_exit(); 5189 } 5190 5191 callout_reset(&np->timeout_ch, step ? step : 1, ncr_timeout, np); 5192 5193 if (INB(nc_istat) & (INTF|SIP|DIP)) { 5194 5195 /* 5196 ** Process pending interrupts. 5197 */ 5198 5199 crit_enter(); 5200 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("{"); 5201 ncr_exception (np); 5202 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("}"); 5203 crit_exit(); 5204 } 5205 } 5206 5207 /*========================================================== 5208 ** 5209 ** log message for real hard errors 5210 ** 5211 ** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)." 5212 ** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf." 5213 ** 5214 ** exception register: 5215 ** ds: dstat 5216 ** si: sist 5217 ** 5218 ** SCSI bus lines: 5219 ** so: control lines as driver by NCR. 5220 ** si: control lines as seen by NCR. 5221 ** sd: scsi data lines as seen by NCR. 5222 ** 5223 ** wide/fastmode: 5224 ** sxfer: (see the manual) 5225 ** scntl3: (see the manual) 5226 ** 5227 ** current script command: 5228 ** dsp: script adress (relative to start of script). 5229 ** dbc: first word of script command. 5230 ** 5231 ** First 16 register of the chip: 5232 ** r0..rf 5233 ** 5234 **========================================================== 5235 */ 5236 5237 static void ncr_log_hard_error(ncb_p np, u_short sist, u_char dstat) 5238 { 5239 u_int32_t dsp; 5240 int script_ofs; 5241 int script_size; 5242 char *script_name; 5243 u_char *script_base; 5244 int i; 5245 5246 dsp = INL (nc_dsp); 5247 5248 if (np->p_script < dsp && 5249 dsp <= np->p_script + sizeof(struct script)) { 5250 script_ofs = dsp - np->p_script; 5251 script_size = sizeof(struct script); 5252 script_base = (u_char *) np->script; 5253 script_name = "script"; 5254 } 5255 else if (np->p_scripth < dsp && 5256 dsp <= np->p_scripth + sizeof(struct scripth)) { 5257 script_ofs = dsp - np->p_scripth; 5258 script_size = sizeof(struct scripth); 5259 script_base = (u_char *) np->scripth; 5260 script_name = "scripth"; 5261 } else { 5262 script_ofs = dsp; 5263 script_size = 0; 5264 script_base = NULL; 5265 script_name = "mem"; 5266 } 5267 5268 kprintf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", 5269 ncr_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist, 5270 (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), (unsigned)INB (nc_sbdl), 5271 (unsigned)INB (nc_sxfer),(unsigned)INB (nc_scntl3), script_name, script_ofs, 5272 (unsigned)INL (nc_dbc)); 5273 5274 if (((script_ofs & 3) == 0) && 5275 (unsigned)script_ofs < script_size) { 5276 kprintf ("%s: script cmd = %08x\n", ncr_name(np), 5277 (int)READSCRIPT_OFF(script_base, script_ofs)); 5278 } 5279 5280 kprintf ("%s: regdump:", ncr_name(np)); 5281 for (i=0; i<16;i++) 5282 kprintf (" %02x", (unsigned)INB_OFF(i)); 5283 kprintf (".\n"); 5284 } 5285 5286 /*========================================================== 5287 ** 5288 ** 5289 ** ncr chip exception handler. 5290 ** 5291 ** 5292 **========================================================== 5293 */ 5294 5295 void ncr_exception (ncb_p np) 5296 { 5297 u_char istat, dstat; 5298 u_short sist; 5299 5300 /* 5301 ** interrupt on the fly ? 5302 */ 5303 while ((istat = INB (nc_istat)) & INTF) { 5304 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("F "); 5305 OUTB (nc_istat, INTF); 5306 np->profile.num_fly++; 5307 ncr_wakeup (np, 0); 5308 } 5309 if (!(istat & (SIP|DIP))) { 5310 return; 5311 } 5312 5313 /* 5314 ** Steinbach's Guideline for Systems Programming: 5315 ** Never test for an error condition you don't know how to handle. 5316 */ 5317 5318 sist = (istat & SIP) ? INW (nc_sist) : 0; 5319 dstat = (istat & DIP) ? INB (nc_dstat) : 0; 5320 np->profile.num_int++; 5321 5322 if (DEBUG_FLAGS & DEBUG_TINY) 5323 kprintf ("<%d|%x:%x|%x:%x>", 5324 INB(nc_scr0), 5325 dstat,sist, 5326 (unsigned)INL(nc_dsp), 5327 (unsigned)INL(nc_dbc)); 5328 if ((dstat==DFE) && (sist==PAR)) return; 5329 5330 /*========================================================== 5331 ** 5332 ** First the normal cases. 5333 ** 5334 **========================================================== 5335 */ 5336 /*------------------------------------------- 5337 ** SCSI reset 5338 **------------------------------------------- 5339 */ 5340 5341 if (sist & RST) { 5342 ncr_init (np, bootverbose ? "scsi reset" : NULL, HS_RESET); 5343 return; 5344 } 5345 5346 /*------------------------------------------- 5347 ** selection timeout 5348 ** 5349 ** IID excluded from dstat mask! 5350 ** (chip bug) 5351 **------------------------------------------- 5352 */ 5353 5354 if ((sist & STO) && 5355 !(sist & (GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5356 !(dstat & (MDPE|BF|ABRT|SIR))) { 5357 ncr_int_sto (np); 5358 return; 5359 } 5360 5361 /*------------------------------------------- 5362 ** Phase mismatch. 5363 **------------------------------------------- 5364 */ 5365 5366 if ((sist & MA) && 5367 !(sist & (STO|GEN|HTH|SGE|UDC|RST|PAR)) && 5368 !(dstat & (MDPE|BF|ABRT|SIR|IID))) { 5369 ncr_int_ma (np, dstat); 5370 return; 5371 } 5372 5373 /*---------------------------------------- 5374 ** move command with length 0 5375 **---------------------------------------- 5376 */ 5377 5378 if ((dstat & IID) && 5379 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5380 !(dstat & (MDPE|BF|ABRT|SIR)) && 5381 ((INL(nc_dbc) & 0xf8000000) == SCR_MOVE_TBL)) { 5382 /* 5383 ** Target wants more data than available. 5384 ** The "no_data" script will do it. 5385 */ 5386 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, no_data)); 5387 return; 5388 } 5389 5390 /*------------------------------------------- 5391 ** Programmed interrupt 5392 **------------------------------------------- 5393 */ 5394 5395 if ((dstat & SIR) && 5396 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5397 !(dstat & (MDPE|BF|ABRT|IID)) && 5398 (INB(nc_dsps) <= SIR_MAX)) { 5399 ncr_int_sir (np); 5400 return; 5401 } 5402 5403 /*======================================== 5404 ** log message for real hard errors 5405 **======================================== 5406 */ 5407 5408 ncr_log_hard_error(np, sist, dstat); 5409 5410 /*======================================== 5411 ** do the register dump 5412 **======================================== 5413 */ 5414 5415 if (time_uptime - np->regtime > 10) { 5416 int i; 5417 np->regtime = time_uptime; 5418 for (i=0; i<sizeof(np->regdump); i++) 5419 ((volatile char*)&np->regdump)[i] = INB_OFF(i); 5420 np->regdump.nc_dstat = dstat; 5421 np->regdump.nc_sist = sist; 5422 } 5423 5424 5425 /*---------------------------------------- 5426 ** clean up the dma fifo 5427 **---------------------------------------- 5428 */ 5429 5430 if ( (INB(nc_sstat0) & (ILF|ORF|OLF) ) || 5431 (INB(nc_sstat1) & (FF3210) ) || 5432 (INB(nc_sstat2) & (ILF1|ORF1|OLF1)) || /* wide .. */ 5433 !(dstat & DFE)) { 5434 kprintf ("%s: have to clear fifos.\n", ncr_name (np)); 5435 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 5436 OUTB (nc_ctest3, np->rv_ctest3 | CLF); 5437 /* clear dma fifo */ 5438 } 5439 5440 /*---------------------------------------- 5441 ** handshake timeout 5442 **---------------------------------------- 5443 */ 5444 5445 if (sist & HTH) { 5446 kprintf ("%s: handshake timeout\n", ncr_name(np)); 5447 OUTB (nc_scntl1, CRST); 5448 DELAY (1000); 5449 OUTB (nc_scntl1, 0x00); 5450 OUTB (nc_scr0, HS_FAIL); 5451 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, cleanup)); 5452 return; 5453 } 5454 5455 /*---------------------------------------- 5456 ** unexpected disconnect 5457 **---------------------------------------- 5458 */ 5459 5460 if ((sist & UDC) && 5461 !(sist & (STO|GEN|HTH|MA|SGE|RST|PAR)) && 5462 !(dstat & (MDPE|BF|ABRT|SIR|IID))) { 5463 OUTB (nc_scr0, HS_UNEXPECTED); 5464 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, cleanup)); 5465 return; 5466 } 5467 5468 /*---------------------------------------- 5469 ** cannot disconnect 5470 **---------------------------------------- 5471 */ 5472 5473 if ((dstat & IID) && 5474 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5475 !(dstat & (MDPE|BF|ABRT|SIR)) && 5476 ((INL(nc_dbc) & 0xf8000000) == SCR_WAIT_DISC)) { 5477 /* 5478 ** Unexpected data cycle while waiting for disconnect. 5479 */ 5480 if (INB(nc_sstat2) & LDSC) { 5481 /* 5482 ** It's an early reconnect. 5483 ** Let's continue ... 5484 */ 5485 OUTB (nc_dcntl, np->rv_dcntl | STD); 5486 /* 5487 ** info message 5488 */ 5489 kprintf ("%s: INFO: LDSC while IID.\n", 5490 ncr_name (np)); 5491 return; 5492 } 5493 kprintf ("%s: target %d doesn't release the bus.\n", 5494 ncr_name (np), INB (nc_sdid)&0x0f); 5495 /* 5496 ** return without restarting the NCR. 5497 ** timeout will do the real work. 5498 */ 5499 return; 5500 } 5501 5502 /*---------------------------------------- 5503 ** single step 5504 **---------------------------------------- 5505 */ 5506 5507 if ((dstat & SSI) && 5508 !(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) && 5509 !(dstat & (MDPE|BF|ABRT|SIR|IID))) { 5510 OUTB (nc_dcntl, np->rv_dcntl | STD); 5511 return; 5512 } 5513 5514 /* 5515 ** @RECOVER@ HTH, SGE, ABRT. 5516 ** 5517 ** We should try to recover from these interrupts. 5518 ** They may occur if there are problems with synch transfers, or 5519 ** if targets are switched on or off while the driver is running. 5520 */ 5521 5522 if (sist & SGE) { 5523 /* clear scsi offsets */ 5524 OUTB (nc_ctest3, np->rv_ctest3 | CLF); 5525 } 5526 5527 /* 5528 ** Freeze controller to be able to read the messages. 5529 */ 5530 5531 if (DEBUG_FLAGS & DEBUG_FREEZE) { 5532 int i; 5533 unsigned char val; 5534 for (i=0; i<0x60; i++) { 5535 switch (i%16) { 5536 5537 case 0: 5538 kprintf ("%s: reg[%d0]: ", 5539 ncr_name(np),i/16); 5540 break; 5541 case 4: 5542 case 8: 5543 case 12: 5544 kprintf (" "); 5545 break; 5546 } 5547 val = bus_space_read_1(np->bst, np->bsh, i); 5548 kprintf (" %x%x", val/16, val%16); 5549 if (i%16==15) kprintf (".\n"); 5550 } 5551 5552 callout_stop(&np->timeout_ch); 5553 5554 kprintf ("%s: halted!\n", ncr_name(np)); 5555 /* 5556 ** don't restart controller ... 5557 */ 5558 OUTB (nc_istat, SRST); 5559 return; 5560 } 5561 5562 #ifdef NCR_FREEZE 5563 /* 5564 ** Freeze system to be able to read the messages. 5565 */ 5566 kprintf ("ncr: fatal error: system halted - press reset to reboot ..."); 5567 crit_enter(); 5568 for (;;); 5569 #endif 5570 5571 /* 5572 ** sorry, have to kill ALL jobs ... 5573 */ 5574 5575 ncr_init (np, "fatal error", HS_FAIL); 5576 } 5577 5578 /*========================================================== 5579 ** 5580 ** ncr chip exception handler for selection timeout 5581 ** 5582 **========================================================== 5583 ** 5584 ** There seems to be a bug in the 53c810. 5585 ** Although a STO-Interrupt is pending, 5586 ** it continues executing script commands. 5587 ** But it will fail and interrupt (IID) on 5588 ** the next instruction where it's looking 5589 ** for a valid phase. 5590 ** 5591 **---------------------------------------------------------- 5592 */ 5593 5594 void ncr_int_sto (ncb_p np) 5595 { 5596 u_long dsa, scratcha, diff; 5597 nccb_p cp; 5598 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("T"); 5599 5600 /* 5601 ** look for nccb and set the status. 5602 */ 5603 5604 dsa = INL (nc_dsa); 5605 cp = np->link_nccb; 5606 while (cp && (CCB_PHYS (cp, phys) != dsa)) 5607 cp = cp->link_nccb; 5608 5609 if (cp) { 5610 cp-> host_status = HS_SEL_TIMEOUT; 5611 ncr_complete (np, cp); 5612 } 5613 5614 /* 5615 ** repair start queue 5616 */ 5617 5618 scratcha = INL (nc_scratcha); 5619 diff = scratcha - NCB_SCRIPTH_PHYS (np, tryloop); 5620 5621 /* assert ((diff <= MAX_START * 20) && !(diff % 20));*/ 5622 5623 if ((diff <= MAX_START * 20) && !(diff % 20)) { 5624 WRITESCRIPT(startpos[0], scratcha); 5625 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, start)); 5626 return; 5627 } 5628 ncr_init (np, "selection timeout", HS_FAIL); 5629 } 5630 5631 /*========================================================== 5632 ** 5633 ** 5634 ** ncr chip exception handler for phase errors. 5635 ** 5636 ** 5637 **========================================================== 5638 ** 5639 ** We have to construct a new transfer descriptor, 5640 ** to transfer the rest of the current block. 5641 ** 5642 **---------------------------------------------------------- 5643 */ 5644 5645 static void ncr_int_ma (ncb_p np, u_char dstat) 5646 { 5647 u_int32_t dbc; 5648 u_int32_t rest; 5649 u_int32_t dsa; 5650 u_int32_t dsp; 5651 u_int32_t nxtdsp; 5652 volatile void *vdsp_base; 5653 size_t vdsp_off; 5654 u_int32_t oadr, olen; 5655 u_int32_t *tblp, *newcmd; 5656 u_char cmd, sbcl, ss0, ss2, ctest5; 5657 u_short delta; 5658 nccb_p cp; 5659 5660 dsp = INL (nc_dsp); 5661 dsa = INL (nc_dsa); 5662 dbc = INL (nc_dbc); 5663 ss0 = INB (nc_sstat0); 5664 ss2 = INB (nc_sstat2); 5665 sbcl= INB (nc_sbcl); 5666 5667 cmd = dbc >> 24; 5668 rest= dbc & 0xffffff; 5669 5670 ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0; 5671 if (ctest5 & DFS) 5672 delta=(((ctest5<<8) | (INB (nc_dfifo) & 0xff)) - rest) & 0x3ff; 5673 else 5674 delta=(INB (nc_dfifo) - rest) & 0x7f; 5675 5676 5677 /* 5678 ** The data in the dma fifo has not been transfered to 5679 ** the target -> add the amount to the rest 5680 ** and clear the data. 5681 ** Check the sstat2 register in case of wide transfer. 5682 */ 5683 5684 if (!(dstat & DFE)) rest += delta; 5685 if (ss0 & OLF) rest++; 5686 if (ss0 & ORF) rest++; 5687 if (INB(nc_scntl3) & EWS) { 5688 if (ss2 & OLF1) rest++; 5689 if (ss2 & ORF1) rest++; 5690 } 5691 OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ 5692 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 5693 5694 /* 5695 ** locate matching cp 5696 */ 5697 cp = np->link_nccb; 5698 while (cp && (CCB_PHYS (cp, phys) != dsa)) 5699 cp = cp->link_nccb; 5700 5701 if (!cp) { 5702 kprintf ("%s: SCSI phase error fixup: CCB already dequeued (%p)\n", 5703 ncr_name (np), (void *) np->header.cp); 5704 return; 5705 } 5706 if (cp != np->header.cp) { 5707 kprintf ("%s: SCSI phase error fixup: CCB address mismatch " 5708 "(%p != %p) np->nccb = %p\n", 5709 ncr_name (np), (void *)cp, (void *)np->header.cp, 5710 (void *)np->link_nccb); 5711 /* return;*/ 5712 } 5713 5714 /* 5715 ** find the interrupted script command, 5716 ** and the address at which to continue. 5717 */ 5718 5719 if (dsp == vtophys (&cp->patch[2])) { 5720 vdsp_base = cp; 5721 vdsp_off = offsetof(struct nccb, patch[0]); 5722 nxtdsp = READSCRIPT_OFF(vdsp_base, vdsp_off + 3*4); 5723 } else if (dsp == vtophys (&cp->patch[6])) { 5724 vdsp_base = cp; 5725 vdsp_off = offsetof(struct nccb, patch[4]); 5726 nxtdsp = READSCRIPT_OFF(vdsp_base, vdsp_off + 3*4); 5727 } else if (dsp > np->p_script && 5728 dsp <= np->p_script + sizeof(struct script)) { 5729 vdsp_base = np->script; 5730 vdsp_off = dsp - np->p_script - 8; 5731 nxtdsp = dsp; 5732 } else { 5733 vdsp_base = np->scripth; 5734 vdsp_off = dsp - np->p_scripth - 8; 5735 nxtdsp = dsp; 5736 } 5737 5738 /* 5739 ** log the information 5740 */ 5741 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) { 5742 kprintf ("P%x%x ",cmd&7, sbcl&7); 5743 kprintf ("RL=%d D=%d SS0=%x ", 5744 (unsigned) rest, (unsigned) delta, ss0); 5745 } 5746 if (DEBUG_FLAGS & DEBUG_PHASE) { 5747 kprintf ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", 5748 cp, np->header.cp, 5749 dsp, 5750 nxtdsp, (volatile char*)vdsp_base+vdsp_off, cmd); 5751 } 5752 5753 /* 5754 ** get old startaddress and old length. 5755 */ 5756 5757 oadr = READSCRIPT_OFF(vdsp_base, vdsp_off + 1*4); 5758 5759 if (cmd & 0x10) { /* Table indirect */ 5760 tblp = (u_int32_t *) ((char*) &cp->phys + oadr); 5761 olen = tblp[0]; 5762 oadr = tblp[1]; 5763 } else { 5764 tblp = NULL; 5765 olen = READSCRIPT_OFF(vdsp_base, vdsp_off) & 0xffffff; 5766 } 5767 5768 if (DEBUG_FLAGS & DEBUG_PHASE) { 5769 kprintf ("OCMD=%x\nTBLP=%p OLEN=%lx OADR=%lx\n", 5770 (unsigned) (READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24), 5771 (void *) tblp, 5772 (u_long) olen, 5773 (u_long) oadr); 5774 } 5775 5776 /* 5777 ** if old phase not dataphase, leave here. 5778 */ 5779 5780 if (cmd != (READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24)) { 5781 PRINT_ADDR(cp->ccb); 5782 kprintf ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n", 5783 (unsigned)cmd, 5784 (unsigned)READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24); 5785 5786 return; 5787 } 5788 if (cmd & 0x06) { 5789 PRINT_ADDR(cp->ccb); 5790 kprintf ("phase change %x-%x %d@%08x resid=%d.\n", 5791 cmd&7, sbcl&7, (unsigned)olen, 5792 (unsigned)oadr, (unsigned)rest); 5793 5794 OUTB (nc_dcntl, np->rv_dcntl | STD); 5795 return; 5796 } 5797 5798 /* 5799 ** choose the correct patch area. 5800 ** if savep points to one, choose the other. 5801 */ 5802 5803 newcmd = cp->patch; 5804 if (cp->phys.header.savep == vtophys (newcmd)) newcmd+=4; 5805 5806 /* 5807 ** fillin the commands 5808 */ 5809 5810 newcmd[0] = ((cmd & 0x0f) << 24) | rest; 5811 newcmd[1] = oadr + olen - rest; 5812 newcmd[2] = SCR_JUMP; 5813 newcmd[3] = nxtdsp; 5814 5815 if (DEBUG_FLAGS & DEBUG_PHASE) { 5816 PRINT_ADDR(cp->ccb); 5817 kprintf ("newcmd[%d] %x %x %x %x.\n", 5818 (int)(newcmd - cp->patch), 5819 (unsigned)newcmd[0], 5820 (unsigned)newcmd[1], 5821 (unsigned)newcmd[2], 5822 (unsigned)newcmd[3]); 5823 } 5824 /* 5825 ** fake the return address (to the patch). 5826 ** and restart script processor at dispatcher. 5827 */ 5828 np->profile.num_break++; 5829 OUTL (nc_temp, vtophys (newcmd)); 5830 if ((cmd & 7) == 0) 5831 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, dispatch)); 5832 else 5833 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, checkatn)); 5834 } 5835 5836 /*========================================================== 5837 ** 5838 ** 5839 ** ncr chip exception handler for programmed interrupts. 5840 ** 5841 ** 5842 **========================================================== 5843 */ 5844 5845 static int ncr_show_msg (u_char * msg) 5846 { 5847 u_char i; 5848 kprintf ("%x",*msg); 5849 if (*msg==MSG_EXTENDED) { 5850 for (i=1;i<8;i++) { 5851 if (i-1>msg[1]) break; 5852 kprintf ("-%x",msg[i]); 5853 } 5854 return (i+1); 5855 } else if ((*msg & 0xf0) == 0x20) { 5856 kprintf ("-%x",msg[1]); 5857 return (2); 5858 } 5859 return (1); 5860 } 5861 5862 void ncr_int_sir (ncb_p np) 5863 { 5864 u_char scntl3; 5865 u_char chg, ofs, per, fak, wide; 5866 u_char num = INB (nc_dsps); 5867 nccb_p cp=NULL; 5868 u_long dsa; 5869 u_int target = INB (nc_sdid) & 0x0f; 5870 tcb_p tp = &np->target[target]; 5871 int i; 5872 if (DEBUG_FLAGS & DEBUG_TINY) kprintf ("I#%d", num); 5873 5874 switch (num) { 5875 case SIR_SENSE_RESTART: 5876 case SIR_STALL_RESTART: 5877 break; 5878 5879 default: 5880 /* 5881 ** lookup the nccb 5882 */ 5883 dsa = INL (nc_dsa); 5884 cp = np->link_nccb; 5885 while (cp && (CCB_PHYS (cp, phys) != dsa)) 5886 cp = cp->link_nccb; 5887 5888 assert (cp); 5889 if (!cp) 5890 goto out; 5891 assert (cp == np->header.cp); 5892 if (cp != np->header.cp) 5893 goto out; 5894 } 5895 5896 switch (num) { 5897 5898 /*-------------------------------------------------------------------- 5899 ** 5900 ** Processing of interrupted getcc selects 5901 ** 5902 **-------------------------------------------------------------------- 5903 */ 5904 5905 case SIR_SENSE_RESTART: 5906 /*------------------------------------------ 5907 ** Script processor is idle. 5908 ** Look for interrupted "check cond" 5909 **------------------------------------------ 5910 */ 5911 5912 if (DEBUG_FLAGS & DEBUG_RESTART) 5913 kprintf ("%s: int#%d",ncr_name (np),num); 5914 cp = (nccb_p) 0; 5915 for (i=0; i<MAX_TARGET; i++) { 5916 if (DEBUG_FLAGS & DEBUG_RESTART) kprintf (" t%d", i); 5917 tp = &np->target[i]; 5918 if (DEBUG_FLAGS & DEBUG_RESTART) kprintf ("+"); 5919 cp = tp->hold_cp; 5920 if (!cp) continue; 5921 if (DEBUG_FLAGS & DEBUG_RESTART) kprintf ("+"); 5922 if ((cp->host_status==HS_BUSY) && 5923 (cp->s_status==SCSI_STATUS_CHECK_COND)) 5924 break; 5925 if (DEBUG_FLAGS & DEBUG_RESTART) kprintf ("- (remove)"); 5926 tp->hold_cp = cp = (nccb_p) 0; 5927 } 5928 5929 if (cp) { 5930 if (DEBUG_FLAGS & DEBUG_RESTART) 5931 kprintf ("+ restart job ..\n"); 5932 OUTL (nc_dsa, CCB_PHYS (cp, phys)); 5933 OUTL (nc_dsp, NCB_SCRIPTH_PHYS (np, getcc)); 5934 return; 5935 } 5936 5937 /* 5938 ** no job, resume normal processing 5939 */ 5940 if (DEBUG_FLAGS & DEBUG_RESTART) kprintf (" -- remove trap\n"); 5941 WRITESCRIPT(start0[0], SCR_INT ^ IFFALSE (0)); 5942 break; 5943 5944 case SIR_SENSE_FAILED: 5945 /*------------------------------------------- 5946 ** While trying to select for 5947 ** getting the condition code, 5948 ** a target reselected us. 5949 **------------------------------------------- 5950 */ 5951 if (DEBUG_FLAGS & DEBUG_RESTART) { 5952 PRINT_ADDR(cp->ccb); 5953 kprintf ("in getcc reselect by t%d.\n", 5954 INB(nc_ssid) & 0x0f); 5955 } 5956 5957 /* 5958 ** Mark this job 5959 */ 5960 cp->host_status = HS_BUSY; 5961 cp->s_status = SCSI_STATUS_CHECK_COND; 5962 np->target[cp->ccb->ccb_h.target_id].hold_cp = cp; 5963 5964 /* 5965 ** And patch code to restart it. 5966 */ 5967 WRITESCRIPT(start0[0], SCR_INT); 5968 break; 5969 5970 /*----------------------------------------------------------------------------- 5971 ** 5972 ** Was Sie schon immer ueber transfermode negotiation wissen wollten ... 5973 ** 5974 ** We try to negotiate sync and wide transfer only after 5975 ** a successfull inquire command. We look at byte 7 of the 5976 ** inquire data to determine the capabilities if the target. 5977 ** 5978 ** When we try to negotiate, we append the negotiation message 5979 ** to the identify and (maybe) simple tag message. 5980 ** The host status field is set to HS_NEGOTIATE to mark this 5981 ** situation. 5982 ** 5983 ** If the target doesn't answer this message immidiately 5984 ** (as required by the standard), the SIR_NEGO_FAIL interrupt 5985 ** will be raised eventually. 5986 ** The handler removes the HS_NEGOTIATE status, and sets the 5987 ** negotiated value to the default (async / nowide). 5988 ** 5989 ** If we receive a matching answer immediately, we check it 5990 ** for validity, and set the values. 5991 ** 5992 ** If we receive a Reject message immediately, we assume the 5993 ** negotiation has failed, and fall back to standard values. 5994 ** 5995 ** If we receive a negotiation message while not in HS_NEGOTIATE 5996 ** state, it's a target initiated negotiation. We prepare a 5997 ** (hopefully) valid answer, set our parameters, and send back 5998 ** this answer to the target. 5999 ** 6000 ** If the target doesn't fetch the answer (no message out phase), 6001 ** we assume the negotiation has failed, and fall back to default 6002 ** settings. 6003 ** 6004 ** When we set the values, we adjust them in all nccbs belonging 6005 ** to this target, in the controller's register, and in the "phys" 6006 ** field of the controller's struct ncb. 6007 ** 6008 ** Possible cases: hs sir msg_in value send goto 6009 ** We try try to negotiate: 6010 ** -> target doesnt't msgin NEG FAIL noop defa. - dispatch 6011 ** -> target rejected our msg NEG FAIL reject defa. - dispatch 6012 ** -> target answered (ok) NEG SYNC sdtr set - clrack 6013 ** -> target answered (!ok) NEG SYNC sdtr defa. REJ--->msg_bad 6014 ** -> target answered (ok) NEG WIDE wdtr set - clrack 6015 ** -> target answered (!ok) NEG WIDE wdtr defa. REJ--->msg_bad 6016 ** -> any other msgin NEG FAIL noop defa. - dispatch 6017 ** 6018 ** Target tries to negotiate: 6019 ** -> incoming message --- SYNC sdtr set SDTR - 6020 ** -> incoming message --- WIDE wdtr set WDTR - 6021 ** We sent our answer: 6022 ** -> target doesn't msgout --- PROTO ? defa. - dispatch 6023 ** 6024 **----------------------------------------------------------------------------- 6025 */ 6026 6027 case SIR_NEGO_FAILED: 6028 /*------------------------------------------------------- 6029 ** 6030 ** Negotiation failed. 6031 ** Target doesn't send an answer message, 6032 ** or target rejected our message. 6033 ** 6034 ** Remove negotiation request. 6035 ** 6036 **------------------------------------------------------- 6037 */ 6038 OUTB (HS_PRT, HS_BUSY); 6039 6040 /* fall through */ 6041 6042 case SIR_NEGO_PROTO: 6043 /*------------------------------------------------------- 6044 ** 6045 ** Negotiation failed. 6046 ** Target doesn't fetch the answer message. 6047 ** 6048 **------------------------------------------------------- 6049 */ 6050 6051 if (DEBUG_FLAGS & DEBUG_NEGO) { 6052 PRINT_ADDR(cp->ccb); 6053 kprintf ("negotiation failed sir=%x status=%x.\n", 6054 num, cp->nego_status); 6055 } 6056 6057 /* 6058 ** any error in negotiation: 6059 ** fall back to default mode. 6060 */ 6061 switch (cp->nego_status) { 6062 6063 case NS_SYNC: 6064 ncr_setsync (np, cp, 0, 0xe0, 0); 6065 break; 6066 6067 case NS_WIDE: 6068 ncr_setwide (np, cp, 0, 0); 6069 break; 6070 6071 } 6072 np->msgin [0] = MSG_NOOP; 6073 np->msgout[0] = MSG_NOOP; 6074 cp->nego_status = 0; 6075 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, dispatch)); 6076 break; 6077 6078 case SIR_NEGO_SYNC: 6079 /* 6080 ** Synchronous request message received. 6081 */ 6082 6083 if (DEBUG_FLAGS & DEBUG_NEGO) { 6084 PRINT_ADDR(cp->ccb); 6085 kprintf ("sync msgin: "); 6086 (void) ncr_show_msg (np->msgin); 6087 kprintf (".\n"); 6088 } 6089 6090 /* 6091 ** get requested values. 6092 */ 6093 6094 chg = 0; 6095 per = np->msgin[3]; 6096 ofs = np->msgin[4]; 6097 if (ofs==0) per=255; 6098 6099 /* 6100 ** check values against driver limits. 6101 */ 6102 if (per < np->minsync) 6103 {chg = 1; per = np->minsync;} 6104 if (per < tp->tinfo.user.period) 6105 {chg = 1; per = tp->tinfo.user.period;} 6106 if (ofs > tp->tinfo.user.offset) 6107 {chg = 1; ofs = tp->tinfo.user.offset;} 6108 6109 /* 6110 ** Check against controller limits. 6111 */ 6112 6113 fak = 7; 6114 scntl3 = 0; 6115 if (ofs != 0) { 6116 ncr_getsync(np, per, &fak, &scntl3); 6117 if (fak > 7) { 6118 chg = 1; 6119 ofs = 0; 6120 } 6121 } 6122 if (ofs == 0) { 6123 fak = 7; 6124 per = 0; 6125 scntl3 = 0; 6126 } 6127 6128 if (DEBUG_FLAGS & DEBUG_NEGO) { 6129 PRINT_ADDR(cp->ccb); 6130 kprintf ("sync: per=%d scntl3=0x%x ofs=%d fak=%d chg=%d.\n", 6131 per, scntl3, ofs, fak, chg); 6132 } 6133 6134 if (INB (HS_PRT) == HS_NEGOTIATE) { 6135 OUTB (HS_PRT, HS_BUSY); 6136 switch (cp->nego_status) { 6137 6138 case NS_SYNC: 6139 /* 6140 ** This was an answer message 6141 */ 6142 if (chg) { 6143 /* 6144 ** Answer wasn't acceptable. 6145 */ 6146 ncr_setsync (np, cp, 0, 0xe0, 0); 6147 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad)); 6148 } else { 6149 /* 6150 ** Answer is ok. 6151 */ 6152 ncr_setsync (np,cp,scntl3,(fak<<5)|ofs, per); 6153 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, clrack)); 6154 } 6155 return; 6156 6157 case NS_WIDE: 6158 ncr_setwide (np, cp, 0, 0); 6159 break; 6160 } 6161 } 6162 6163 /* 6164 ** It was a request. Set value and 6165 ** prepare an answer message 6166 */ 6167 6168 ncr_setsync (np, cp, scntl3, (fak<<5)|ofs, per); 6169 6170 np->msgout[0] = MSG_EXTENDED; 6171 np->msgout[1] = 3; 6172 np->msgout[2] = MSG_EXT_SDTR; 6173 np->msgout[3] = per; 6174 np->msgout[4] = ofs; 6175 6176 cp->nego_status = NS_SYNC; 6177 6178 if (DEBUG_FLAGS & DEBUG_NEGO) { 6179 PRINT_ADDR(cp->ccb); 6180 kprintf ("sync msgout: "); 6181 (void) ncr_show_msg (np->msgout); 6182 kprintf (".\n"); 6183 } 6184 6185 if (!ofs) { 6186 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad)); 6187 return; 6188 } 6189 np->msgin [0] = MSG_NOOP; 6190 6191 break; 6192 6193 case SIR_NEGO_WIDE: 6194 /* 6195 ** Wide request message received. 6196 */ 6197 if (DEBUG_FLAGS & DEBUG_NEGO) { 6198 PRINT_ADDR(cp->ccb); 6199 kprintf ("wide msgin: "); 6200 (void) ncr_show_msg (np->msgin); 6201 kprintf (".\n"); 6202 } 6203 6204 /* 6205 ** get requested values. 6206 */ 6207 6208 chg = 0; 6209 wide = np->msgin[3]; 6210 6211 /* 6212 ** check values against driver limits. 6213 */ 6214 6215 if (wide > tp->tinfo.user.width) 6216 {chg = 1; wide = tp->tinfo.user.width;} 6217 6218 if (DEBUG_FLAGS & DEBUG_NEGO) { 6219 PRINT_ADDR(cp->ccb); 6220 kprintf ("wide: wide=%d chg=%d.\n", wide, chg); 6221 } 6222 6223 if (INB (HS_PRT) == HS_NEGOTIATE) { 6224 OUTB (HS_PRT, HS_BUSY); 6225 switch (cp->nego_status) { 6226 6227 case NS_WIDE: 6228 /* 6229 ** This was an answer message 6230 */ 6231 if (chg) { 6232 /* 6233 ** Answer wasn't acceptable. 6234 */ 6235 ncr_setwide (np, cp, 0, 1); 6236 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad)); 6237 } else { 6238 /* 6239 ** Answer is ok. 6240 */ 6241 ncr_setwide (np, cp, wide, 1); 6242 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, clrack)); 6243 } 6244 return; 6245 6246 case NS_SYNC: 6247 ncr_setsync (np, cp, 0, 0xe0, 0); 6248 break; 6249 } 6250 } 6251 6252 /* 6253 ** It was a request, set value and 6254 ** prepare an answer message 6255 */ 6256 6257 ncr_setwide (np, cp, wide, 1); 6258 6259 np->msgout[0] = MSG_EXTENDED; 6260 np->msgout[1] = 2; 6261 np->msgout[2] = MSG_EXT_WDTR; 6262 np->msgout[3] = wide; 6263 6264 np->msgin [0] = MSG_NOOP; 6265 6266 cp->nego_status = NS_WIDE; 6267 6268 if (DEBUG_FLAGS & DEBUG_NEGO) { 6269 PRINT_ADDR(cp->ccb); 6270 kprintf ("wide msgout: "); 6271 (void) ncr_show_msg (np->msgout); 6272 kprintf (".\n"); 6273 } 6274 break; 6275 6276 /*-------------------------------------------------------------------- 6277 ** 6278 ** Processing of special messages 6279 ** 6280 **-------------------------------------------------------------------- 6281 */ 6282 6283 case SIR_REJECT_RECEIVED: 6284 /*----------------------------------------------- 6285 ** 6286 ** We received a MSG_MESSAGE_REJECT message. 6287 ** 6288 **----------------------------------------------- 6289 */ 6290 6291 PRINT_ADDR(cp->ccb); 6292 kprintf ("MSG_MESSAGE_REJECT received (%x:%x).\n", 6293 (unsigned)np->lastmsg, np->msgout[0]); 6294 break; 6295 6296 case SIR_REJECT_SENT: 6297 /*----------------------------------------------- 6298 ** 6299 ** We received an unknown message 6300 ** 6301 **----------------------------------------------- 6302 */ 6303 6304 PRINT_ADDR(cp->ccb); 6305 kprintf ("MSG_MESSAGE_REJECT sent for "); 6306 (void) ncr_show_msg (np->msgin); 6307 kprintf (".\n"); 6308 break; 6309 6310 /*-------------------------------------------------------------------- 6311 ** 6312 ** Processing of special messages 6313 ** 6314 **-------------------------------------------------------------------- 6315 */ 6316 6317 case SIR_IGN_RESIDUE: 6318 /*----------------------------------------------- 6319 ** 6320 ** We received an IGNORE RESIDUE message, 6321 ** which couldn't be handled by the script. 6322 ** 6323 **----------------------------------------------- 6324 */ 6325 6326 PRINT_ADDR(cp->ccb); 6327 kprintf ("MSG_IGN_WIDE_RESIDUE received, but not yet implemented.\n"); 6328 break; 6329 6330 case SIR_MISSING_SAVE: 6331 /*----------------------------------------------- 6332 ** 6333 ** We received an DISCONNECT message, 6334 ** but the datapointer wasn't saved before. 6335 ** 6336 **----------------------------------------------- 6337 */ 6338 6339 PRINT_ADDR(cp->ccb); 6340 kprintf ("MSG_DISCONNECT received, but datapointer not saved:\n" 6341 "\tdata=%x save=%x goal=%x.\n", 6342 (unsigned) INL (nc_temp), 6343 (unsigned) np->header.savep, 6344 (unsigned) np->header.goalp); 6345 break; 6346 6347 /*-------------------------------------------------------------------- 6348 ** 6349 ** Processing of a "SCSI_STATUS_QUEUE_FULL" status. 6350 ** 6351 ** XXX JGibbs - We should do the same thing for BUSY status. 6352 ** 6353 ** The current command has been rejected, 6354 ** because there are too many in the command queue. 6355 ** We have started too many commands for that target. 6356 ** 6357 **-------------------------------------------------------------------- 6358 */ 6359 case SIR_STALL_QUEUE: 6360 cp->xerr_status = XE_OK; 6361 cp->host_status = HS_COMPLETE; 6362 cp->s_status = SCSI_STATUS_QUEUE_FULL; 6363 ncr_freeze_devq(np, cp->ccb->ccb_h.path); 6364 ncr_complete(np, cp); 6365 6366 /* FALL THROUGH */ 6367 6368 case SIR_STALL_RESTART: 6369 /*----------------------------------------------- 6370 ** 6371 ** Enable selecting again, 6372 ** if NO disconnected jobs. 6373 ** 6374 **----------------------------------------------- 6375 */ 6376 /* 6377 ** Look for a disconnected job. 6378 */ 6379 cp = np->link_nccb; 6380 while (cp && cp->host_status != HS_DISCONNECT) 6381 cp = cp->link_nccb; 6382 6383 /* 6384 ** if there is one, ... 6385 */ 6386 if (cp) { 6387 /* 6388 ** wait for reselection 6389 */ 6390 OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, reselect)); 6391 return; 6392 } 6393 6394 /* 6395 ** else remove the interrupt. 6396 */ 6397 6398 kprintf ("%s: queue empty.\n", ncr_name (np)); 6399 WRITESCRIPT(start1[0], SCR_INT ^ IFFALSE (0)); 6400 break; 6401 } 6402 6403 out: 6404 OUTB (nc_dcntl, np->rv_dcntl | STD); 6405 } 6406 6407 /*========================================================== 6408 ** 6409 ** 6410 ** Acquire a control block 6411 ** 6412 ** 6413 **========================================================== 6414 */ 6415 6416 static nccb_p ncr_get_nccb 6417 (ncb_p np, u_long target, u_long lun) 6418 { 6419 lcb_p lp; 6420 nccb_p cp = NULL; 6421 6422 /* Keep our timeout handler out */ 6423 crit_enter(); 6424 6425 /* 6426 ** Lun structure available ? 6427 */ 6428 6429 lp = np->target[target].lp[lun]; 6430 if (lp) { 6431 cp = lp->next_nccb; 6432 6433 /* 6434 ** Look for free CCB 6435 */ 6436 6437 while (cp && cp->magic) { 6438 cp = cp->next_nccb; 6439 } 6440 } 6441 6442 /* 6443 ** if nothing available, create one. 6444 */ 6445 6446 if (cp == NULL) 6447 cp = ncr_alloc_nccb(np, target, lun); 6448 6449 if (cp != NULL) { 6450 if (cp->magic) { 6451 kprintf("%s: Bogus free cp found\n", ncr_name(np)); 6452 crit_exit(); 6453 return (NULL); 6454 } 6455 cp->magic = 1; 6456 } 6457 crit_exit(); 6458 return (cp); 6459 } 6460 6461 /*========================================================== 6462 ** 6463 ** 6464 ** Release one control block 6465 ** 6466 ** 6467 **========================================================== 6468 */ 6469 6470 void ncr_free_nccb (ncb_p np, nccb_p cp) 6471 { 6472 /* 6473 ** sanity 6474 */ 6475 6476 assert (cp != NULL); 6477 6478 cp -> host_status = HS_IDLE; 6479 cp -> magic = 0; 6480 } 6481 6482 /*========================================================== 6483 ** 6484 ** 6485 ** Allocation of resources for Targets/Luns/Tags. 6486 ** 6487 ** 6488 **========================================================== 6489 */ 6490 6491 static nccb_p 6492 ncr_alloc_nccb (ncb_p np, u_long target, u_long lun) 6493 { 6494 tcb_p tp; 6495 lcb_p lp; 6496 nccb_p cp; 6497 6498 assert (np != NULL); 6499 6500 if (target>=MAX_TARGET) return(NULL); 6501 if (lun >=MAX_LUN ) return(NULL); 6502 6503 tp=&np->target[target]; 6504 6505 if (!tp->jump_tcb.l_cmd) { 6506 6507 /* 6508 ** initialize it. 6509 */ 6510 tp->jump_tcb.l_cmd = (SCR_JUMP^IFFALSE (DATA (0x80 + target))); 6511 tp->jump_tcb.l_paddr = np->jump_tcb.l_paddr; 6512 6513 tp->getscr[0] = 6514 (np->features & FE_PFEN)? SCR_COPY(1) : SCR_COPY_F(1); 6515 tp->getscr[1] = vtophys (&tp->tinfo.sval); 6516 tp->getscr[2] = rman_get_start(np->reg_res) + offsetof (struct ncr_reg, nc_sxfer); 6517 tp->getscr[3] = 6518 (np->features & FE_PFEN)? SCR_COPY(1) : SCR_COPY_F(1); 6519 tp->getscr[4] = vtophys (&tp->tinfo.wval); 6520 tp->getscr[5] = rman_get_start(np->reg_res) + offsetof (struct ncr_reg, nc_scntl3); 6521 6522 assert (((offsetof(struct ncr_reg, nc_sxfer) ^ 6523 (offsetof(struct tcb ,tinfo) 6524 + offsetof(struct ncr_target_tinfo, sval))) & 3) == 0); 6525 assert (((offsetof(struct ncr_reg, nc_scntl3) ^ 6526 (offsetof(struct tcb, tinfo) 6527 + offsetof(struct ncr_target_tinfo, wval))) &3) == 0); 6528 6529 tp->call_lun.l_cmd = (SCR_CALL); 6530 tp->call_lun.l_paddr = NCB_SCRIPT_PHYS (np, resel_lun); 6531 6532 tp->jump_lcb.l_cmd = (SCR_JUMP); 6533 tp->jump_lcb.l_paddr = NCB_SCRIPTH_PHYS (np, abort); 6534 np->jump_tcb.l_paddr = vtophys (&tp->jump_tcb); 6535 } 6536 6537 /* 6538 ** Logic unit control block 6539 */ 6540 lp = tp->lp[lun]; 6541 if (!lp) { 6542 /* 6543 ** Allocate a lcb 6544 */ 6545 lp = kmalloc (sizeof (struct lcb), M_DEVBUF, M_WAITOK | M_ZERO); 6546 6547 /* 6548 ** Initialize it 6549 */ 6550 lp->jump_lcb.l_cmd = (SCR_JUMP ^ IFFALSE (DATA (lun))); 6551 lp->jump_lcb.l_paddr = tp->jump_lcb.l_paddr; 6552 6553 lp->call_tag.l_cmd = (SCR_CALL); 6554 lp->call_tag.l_paddr = NCB_SCRIPT_PHYS (np, resel_tag); 6555 6556 lp->jump_nccb.l_cmd = (SCR_JUMP); 6557 lp->jump_nccb.l_paddr = NCB_SCRIPTH_PHYS (np, aborttag); 6558 6559 lp->actlink = 1; 6560 6561 /* 6562 ** Chain into LUN list 6563 */ 6564 tp->jump_lcb.l_paddr = vtophys (&lp->jump_lcb); 6565 tp->lp[lun] = lp; 6566 6567 } 6568 6569 /* 6570 ** Allocate a nccb 6571 */ 6572 cp = kmalloc (sizeof (struct nccb), M_DEVBUF, M_WAITOK | M_ZERO); 6573 6574 if (DEBUG_FLAGS & DEBUG_ALLOC) { 6575 kprintf ("new nccb @%p.\n", cp); 6576 } 6577 6578 /* 6579 ** Fill in physical addresses 6580 */ 6581 6582 cp->p_nccb = vtophys (cp); 6583 6584 /* 6585 ** Chain into reselect list 6586 */ 6587 cp->jump_nccb.l_cmd = SCR_JUMP; 6588 cp->jump_nccb.l_paddr = lp->jump_nccb.l_paddr; 6589 lp->jump_nccb.l_paddr = CCB_PHYS (cp, jump_nccb); 6590 cp->call_tmp.l_cmd = SCR_CALL; 6591 cp->call_tmp.l_paddr = NCB_SCRIPT_PHYS (np, resel_tmp); 6592 6593 /* 6594 ** Chain into wakeup list 6595 */ 6596 cp->link_nccb = np->link_nccb; 6597 np->link_nccb = cp; 6598 6599 /* 6600 ** Chain into CCB list 6601 */ 6602 cp->next_nccb = lp->next_nccb; 6603 lp->next_nccb = cp; 6604 6605 return (cp); 6606 } 6607 6608 /*========================================================== 6609 ** 6610 ** 6611 ** Build Scatter Gather Block 6612 ** 6613 ** 6614 **========================================================== 6615 ** 6616 ** The transfer area may be scattered among 6617 ** several non adjacent physical pages. 6618 ** 6619 ** We may use MAX_SCATTER blocks. 6620 ** 6621 **---------------------------------------------------------- 6622 */ 6623 6624 static int ncr_scatter 6625 (struct dsb* phys, vm_offset_t vaddr, vm_size_t datalen) 6626 { 6627 u_long paddr, pnext; 6628 6629 u_short segment = 0; 6630 u_long segsize, segaddr; 6631 u_long size, csize = 0; 6632 u_long chunk = MAX_SIZE; 6633 int free; 6634 6635 bzero (&phys->data, sizeof (phys->data)); 6636 if (!datalen) return (0); 6637 6638 paddr = vtophys (vaddr); 6639 6640 /* 6641 ** insert extra break points at a distance of chunk. 6642 ** We try to reduce the number of interrupts caused 6643 ** by unexpected phase changes due to disconnects. 6644 ** A typical harddisk may disconnect before ANY block. 6645 ** If we wanted to avoid unexpected phase changes at all 6646 ** we had to use a break point every 512 bytes. 6647 ** Of course the number of scatter/gather blocks is 6648 ** limited. 6649 */ 6650 6651 free = MAX_SCATTER - 1; 6652 6653 if (vaddr & PAGE_MASK) free -= datalen / PAGE_SIZE; 6654 6655 if (free>1) 6656 while ((chunk * free >= 2 * datalen) && (chunk>=1024)) 6657 chunk /= 2; 6658 6659 if(DEBUG_FLAGS & DEBUG_SCATTER) 6660 kprintf("ncr?:\tscattering virtual=%p size=%d chunk=%d.\n", 6661 (void *) vaddr, (unsigned) datalen, (unsigned) chunk); 6662 6663 /* 6664 ** Build data descriptors. 6665 */ 6666 while (datalen && (segment < MAX_SCATTER)) { 6667 6668 /* 6669 ** this segment is empty 6670 */ 6671 segsize = 0; 6672 segaddr = paddr; 6673 pnext = paddr; 6674 6675 if (!csize) csize = chunk; 6676 6677 while ((datalen) && (paddr == pnext) && (csize)) { 6678 6679 /* 6680 ** continue this segment 6681 */ 6682 pnext = (paddr & (~PAGE_MASK)) + PAGE_SIZE; 6683 6684 /* 6685 ** Compute max size 6686 */ 6687 6688 size = pnext - paddr; /* page size */ 6689 if (size > datalen) size = datalen; /* data size */ 6690 if (size > csize ) size = csize ; /* chunksize */ 6691 6692 segsize += size; 6693 vaddr += size; 6694 csize -= size; 6695 datalen -= size; 6696 paddr = vtophys (vaddr); 6697 } 6698 6699 if(DEBUG_FLAGS & DEBUG_SCATTER) 6700 kprintf ("\tseg #%d addr=%x size=%d (rest=%d).\n", 6701 segment, 6702 (unsigned) segaddr, 6703 (unsigned) segsize, 6704 (unsigned) datalen); 6705 6706 phys->data[segment].addr = segaddr; 6707 phys->data[segment].size = segsize; 6708 segment++; 6709 } 6710 6711 if (datalen) { 6712 kprintf("ncr?: scatter/gather failed (residue=%d).\n", 6713 (unsigned) datalen); 6714 return (-1); 6715 } 6716 6717 return (segment); 6718 } 6719 6720 /*========================================================== 6721 ** 6722 ** 6723 ** Test the pci bus snoop logic :-( 6724 ** 6725 ** Has to be called with interrupts disabled. 6726 ** 6727 ** 6728 **========================================================== 6729 */ 6730 6731 #ifndef NCR_IOMAPPED 6732 static int ncr_regtest (struct ncb* np) 6733 { 6734 volatile u_int32_t data; 6735 /* 6736 ** ncr registers may NOT be cached. 6737 ** write 0xffffffff to a read only register area, 6738 ** and try to read it back. 6739 */ 6740 data = 0xffffffff; 6741 OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data); 6742 data = INL_OFF(offsetof(struct ncr_reg, nc_dstat)); 6743 #if 1 6744 if (data == 0xffffffff) { 6745 #else 6746 if ((data & 0xe2f0fffd) != 0x02000080) { 6747 #endif 6748 kprintf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", 6749 (unsigned) data); 6750 return (0x10); 6751 } 6752 return (0); 6753 } 6754 #endif 6755 6756 static int ncr_snooptest (struct ncb* np) 6757 { 6758 u_int32_t ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc; 6759 int i, err=0; 6760 #ifndef NCR_IOMAPPED 6761 err |= ncr_regtest (np); 6762 if (err) return (err); 6763 #endif 6764 /* 6765 ** init 6766 */ 6767 pc = NCB_SCRIPTH_PHYS (np, snooptest); 6768 host_wr = 1; 6769 ncr_wr = 2; 6770 /* 6771 ** Set memory and register. 6772 */ 6773 ncr_cache = host_wr; 6774 OUTL (nc_temp, ncr_wr); 6775 /* 6776 ** Start script (exchange values) 6777 */ 6778 OUTL (nc_dsp, pc); 6779 /* 6780 ** Wait 'til done (with timeout) 6781 */ 6782 for (i=0; i<NCR_SNOOP_TIMEOUT; i++) 6783 if (INB(nc_istat) & (INTF|SIP|DIP)) 6784 break; 6785 /* 6786 ** Save termination position. 6787 */ 6788 pc = INL (nc_dsp); 6789 /* 6790 ** Read memory and register. 6791 */ 6792 host_rd = ncr_cache; 6793 ncr_rd = INL (nc_scratcha); 6794 ncr_bk = INL (nc_temp); 6795 /* 6796 ** Reset ncr chip 6797 */ 6798 OUTB (nc_istat, SRST); 6799 DELAY (1000); 6800 OUTB (nc_istat, 0 ); 6801 /* 6802 ** check for timeout 6803 */ 6804 if (i>=NCR_SNOOP_TIMEOUT) { 6805 kprintf ("CACHE TEST FAILED: timeout.\n"); 6806 return (0x20); 6807 } 6808 /* 6809 ** Check termination position. 6810 */ 6811 if (pc != NCB_SCRIPTH_PHYS (np, snoopend)+8) { 6812 kprintf ("CACHE TEST FAILED: script execution failed.\n"); 6813 kprintf ("start=%08lx, pc=%08lx, end=%08lx\n", 6814 (u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc, 6815 (u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8); 6816 return (0x40); 6817 } 6818 /* 6819 ** Show results. 6820 */ 6821 if (host_wr != ncr_rd) { 6822 kprintf ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n", 6823 (int) host_wr, (int) ncr_rd); 6824 err |= 1; 6825 } 6826 if (host_rd != ncr_wr) { 6827 kprintf ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n", 6828 (int) ncr_wr, (int) host_rd); 6829 err |= 2; 6830 } 6831 if (ncr_bk != ncr_wr) { 6832 kprintf ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n", 6833 (int) ncr_wr, (int) ncr_bk); 6834 err |= 4; 6835 } 6836 return (err); 6837 } 6838 6839 /*========================================================== 6840 ** 6841 ** 6842 ** Profiling the drivers and targets performance. 6843 ** 6844 ** 6845 **========================================================== 6846 */ 6847 6848 /* 6849 ** Compute the difference in milliseconds. 6850 **/ 6851 6852 static int ncr_delta (int *from, int *to) 6853 { 6854 if (!from) return (-1); 6855 if (!to) return (-2); 6856 return ((to - from) * 1000 / hz); 6857 } 6858 6859 #define PROFILE cp->phys.header.stamp 6860 static void ncb_profile (ncb_p np, nccb_p cp) 6861 { 6862 int co, da, st, en, di, se, post,work,disc; 6863 u_long diff; 6864 6865 PROFILE.end = ticks; 6866 6867 st = ncr_delta (&PROFILE.start,&PROFILE.status); 6868 if (st<0) return; /* status not reached */ 6869 6870 da = ncr_delta (&PROFILE.start,&PROFILE.data); 6871 if (da<0) return; /* No data transfer phase */ 6872 6873 co = ncr_delta (&PROFILE.start,&PROFILE.command); 6874 if (co<0) return; /* command not executed */ 6875 6876 en = ncr_delta (&PROFILE.start,&PROFILE.end), 6877 di = ncr_delta (&PROFILE.start,&PROFILE.disconnect), 6878 se = ncr_delta (&PROFILE.start,&PROFILE.select); 6879 post = en - st; 6880 6881 /* 6882 ** @PROFILE@ Disconnect time invalid if multiple disconnects 6883 */ 6884 6885 if (di>=0) disc = se-di; else disc = 0; 6886 6887 work = (st - co) - disc; 6888 6889 diff = (np->disc_phys - np->disc_ref) & 0xff; 6890 np->disc_ref += diff; 6891 6892 np->profile.num_trans += 1; 6893 if (cp->ccb) 6894 np->profile.num_bytes += cp->ccb->csio.dxfer_len; 6895 np->profile.num_disc += diff; 6896 np->profile.ms_setup += co; 6897 np->profile.ms_data += work; 6898 np->profile.ms_disc += disc; 6899 np->profile.ms_post += post; 6900 } 6901 #undef PROFILE 6902 6903 /*========================================================== 6904 ** 6905 ** Determine the ncr's clock frequency. 6906 ** This is essential for the negotiation 6907 ** of the synchronous transfer rate. 6908 ** 6909 **========================================================== 6910 ** 6911 ** Note: we have to return the correct value. 6912 ** THERE IS NO SAVE DEFAULT VALUE. 6913 ** 6914 ** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock. 6915 ** 53C860 and 53C875 rev. 1 support fast20 transfers but 6916 ** do not have a clock doubler and so are provided with a 6917 ** 80 MHz clock. All other fast20 boards incorporate a doubler 6918 ** and so should be delivered with a 40 MHz clock. 6919 ** The future fast40 chips (895/895) use a 40 Mhz base clock 6920 ** and provide a clock quadrupler (160 Mhz). The code below 6921 ** tries to deal as cleverly as possible with all this stuff. 6922 ** 6923 **---------------------------------------------------------- 6924 */ 6925 6926 /* 6927 * Select NCR SCSI clock frequency 6928 */ 6929 static void ncr_selectclock(ncb_p np, u_char scntl3) 6930 { 6931 if (np->multiplier < 2) { 6932 OUTB(nc_scntl3, scntl3); 6933 return; 6934 } 6935 6936 if (bootverbose >= 2) 6937 kprintf ("%s: enabling clock multiplier\n", ncr_name(np)); 6938 6939 OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */ 6940 if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */ 6941 int i = 20; 6942 while (!(INB(nc_stest4) & LCKFRQ) && --i > 0) 6943 DELAY(20); 6944 if (!i) 6945 kprintf("%s: the chip cannot lock the frequency\n", ncr_name(np)); 6946 } else /* Wait 20 micro-seconds for doubler */ 6947 DELAY(20); 6948 OUTB(nc_stest3, HSC); /* Halt the scsi clock */ 6949 OUTB(nc_scntl3, scntl3); 6950 OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ 6951 OUTB(nc_stest3, 0x00); /* Restart scsi clock */ 6952 } 6953 6954 /* 6955 * calculate NCR SCSI clock frequency (in KHz) 6956 */ 6957 static unsigned 6958 ncrgetfreq (ncb_p np, int gen) 6959 { 6960 int ms = 0; 6961 /* 6962 * Measure GEN timer delay in order 6963 * to calculate SCSI clock frequency 6964 * 6965 * This code will never execute too 6966 * many loop iterations (if DELAY is 6967 * reasonably correct). It could get 6968 * too low a delay (too high a freq.) 6969 * if the CPU is slow executing the 6970 * loop for some reason (an NMI, for 6971 * example). For this reason we will 6972 * if multiple measurements are to be 6973 * performed trust the higher delay 6974 * (lower frequency returned). 6975 */ 6976 OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */ 6977 OUTW (nc_sien , 0); /* mask all scsi interrupts */ 6978 (void) INW (nc_sist); /* clear pending scsi interrupt */ 6979 OUTB (nc_dien , 0); /* mask all dma interrupts */ 6980 (void) INW (nc_sist); /* another one, just to be sure :) */ 6981 OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */ 6982 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6983 OUTB (nc_stime1, gen); /* set to nominal delay of (1<<gen) * 125us */ 6984 while (!(INW(nc_sist) & GEN) && ms++ < 1000) 6985 DELAY(1000); /* count ms */ 6986 OUTB (nc_stime1, 0); /* disable general purpose timer */ 6987 OUTB (nc_scntl3, 0); 6988 /* 6989 * Set prescaler to divide by whatever "0" means. 6990 * "0" ought to choose divide by 2, but appears 6991 * to set divide by 3.5 mode in my 53c810 ... 6992 */ 6993 OUTB (nc_scntl3, 0); 6994 6995 if (bootverbose >= 2) 6996 kprintf ("\tDelay (GEN=%d): %u msec\n", gen, ms); 6997 /* 6998 * adjust for prescaler, and convert into KHz 6999 */ 7000 return ms ? ((1 << gen) * 4440) / ms : 0; 7001 } 7002 7003 static void ncr_getclock (ncb_p np, u_char multiplier) 7004 { 7005 unsigned char scntl3; 7006 unsigned char stest1; 7007 scntl3 = INB(nc_scntl3); 7008 stest1 = INB(nc_stest1); 7009 7010 np->multiplier = 1; 7011 7012 if (multiplier > 1) { 7013 np->multiplier = multiplier; 7014 np->clock_khz = 40000 * multiplier; 7015 } else { 7016 if ((scntl3 & 7) == 0) { 7017 unsigned f1, f2; 7018 /* throw away first result */ 7019 (void) ncrgetfreq (np, 11); 7020 f1 = ncrgetfreq (np, 11); 7021 f2 = ncrgetfreq (np, 11); 7022 7023 if (bootverbose >= 2) 7024 kprintf ("\tNCR clock is %uKHz, %uKHz\n", f1, f2); 7025 if (f1 > f2) f1 = f2; /* trust lower result */ 7026 if (f1 > 45000) { 7027 scntl3 = 5; /* >45Mhz: assume 80MHz */ 7028 } else { 7029 scntl3 = 3; /* <45Mhz: assume 40MHz */ 7030 } 7031 } 7032 else if ((scntl3 & 7) == 5) 7033 np->clock_khz = 80000; /* Probably a 875 rev. 1 ? */ 7034 } 7035 } 7036 7037 /*=========================================================================*/ 7038 7039 #ifdef NCR_TEKRAM_EEPROM 7040 7041 struct tekram_eeprom_dev { 7042 u_char devmode; 7043 #define TKR_PARCHK 0x01 7044 #define TKR_TRYSYNC 0x02 7045 #define TKR_ENDISC 0x04 7046 #define TKR_STARTUNIT 0x08 7047 #define TKR_USETAGS 0x10 7048 #define TKR_TRYWIDE 0x20 7049 u_char syncparam; /* max. sync transfer rate (table ?) */ 7050 u_char filler1; 7051 u_char filler2; 7052 }; 7053 7054 7055 struct tekram_eeprom { 7056 struct tekram_eeprom_dev 7057 dev[16]; 7058 u_char adaptid; 7059 u_char adaptmode; 7060 #define TKR_ADPT_GT2DRV 0x01 7061 #define TKR_ADPT_GT1GB 0x02 7062 #define TKR_ADPT_RSTBUS 0x04 7063 #define TKR_ADPT_ACTNEG 0x08 7064 #define TKR_ADPT_NOSEEK 0x10 7065 #define TKR_ADPT_MORLUN 0x20 7066 u_char delay; /* unit ? ( table ??? ) */ 7067 u_char tags; /* use 4 times as many ... */ 7068 u_char filler[60]; 7069 }; 7070 7071 static void 7072 tekram_write_bit (ncb_p np, int bit) 7073 { 7074 u_char val = 0x10 + ((bit & 1) << 1); 7075 7076 DELAY(10); 7077 OUTB (nc_gpreg, val); 7078 DELAY(10); 7079 OUTB (nc_gpreg, val | 0x04); 7080 DELAY(10); 7081 OUTB (nc_gpreg, val); 7082 DELAY(10); 7083 } 7084 7085 static int 7086 tekram_read_bit (ncb_p np) 7087 { 7088 OUTB (nc_gpreg, 0x10); 7089 DELAY(10); 7090 OUTB (nc_gpreg, 0x14); 7091 DELAY(10); 7092 return INB (nc_gpreg) & 1; 7093 } 7094 7095 static u_short 7096 read_tekram_eeprom_reg (ncb_p np, int reg) 7097 { 7098 int bit; 7099 u_short result = 0; 7100 int cmd = 0x80 | reg; 7101 7102 OUTB (nc_gpreg, 0x10); 7103 7104 tekram_write_bit (np, 1); 7105 for (bit = 7; bit >= 0; bit--) 7106 { 7107 tekram_write_bit (np, cmd >> bit); 7108 } 7109 7110 for (bit = 0; bit < 16; bit++) 7111 { 7112 result <<= 1; 7113 result |= tekram_read_bit (np); 7114 } 7115 7116 OUTB (nc_gpreg, 0x00); 7117 return result; 7118 } 7119 7120 static int 7121 read_tekram_eeprom(ncb_p np, struct tekram_eeprom *buffer) 7122 { 7123 u_short *p = (u_short *) buffer; 7124 u_short sum = 0; 7125 int i; 7126 7127 if (INB (nc_gpcntl) != 0x09) 7128 { 7129 return 0; 7130 } 7131 for (i = 0; i < 64; i++) 7132 { 7133 u_short val; 7134 if((i&0x0f) == 0) kprintf ("%02x:", i*2); 7135 val = read_tekram_eeprom_reg (np, i); 7136 if (p) 7137 *p++ = val; 7138 sum += val; 7139 if((i&0x01) == 0x00) kprintf (" "); 7140 kprintf ("%02x%02x", val & 0xff, (val >> 8) & 0xff); 7141 if((i&0x0f) == 0x0f) kprintf ("\n"); 7142 } 7143 kprintf ("Sum = %04x\n", sum); 7144 return sum == 0x1234; 7145 } 7146 #endif /* NCR_TEKRAM_EEPROM */ 7147 7148 static device_method_t ncr_methods[] = { 7149 /* Device interface */ 7150 DEVMETHOD(device_probe, ncr_probe), 7151 DEVMETHOD(device_attach, ncr_attach), 7152 7153 DEVMETHOD_END 7154 }; 7155 7156 static driver_t ncr_driver = { 7157 "ncr", 7158 ncr_methods, 7159 sizeof(struct ncb), 7160 }; 7161 7162 static devclass_t ncr_devclass; 7163 7164 DRIVER_MODULE(if_ncr, pci, ncr_driver, ncr_devclass, NULL, NULL); 7165 7166 /*=========================================================================*/ 7167 #endif /* _KERNEL */ 7168