1 /*- 2 * Copyright (c) 1997, 1998, 1999 Nicolas Souchu 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: src/sys/dev/ppbus/vpo.c,v 1.20.2.1 2000/05/07 21:08:18 n_hibma Exp $ 27 * $DragonFly: src/sys/dev/disk/vpo/vpo.c,v 1.4 2004/03/15 01:10:44 dillon Exp $ 28 */ 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/module.h> 33 #include <sys/bus.h> 34 #include <sys/malloc.h> 35 #include <sys/devicestat.h> /* for struct devstat */ 36 37 #include <machine/clock.h> 38 39 #include <bus/cam/cam.h> 40 #include <bus/cam/cam_ccb.h> 41 #include <bus/cam/cam_sim.h> 42 #include <bus/cam/cam_xpt_sim.h> 43 #include <bus/cam/cam_debug.h> 44 #include <bus/cam/cam_periph.h> 45 46 #include <bus/cam/scsi/scsi_all.h> 47 #include <bus/cam/scsi/scsi_message.h> 48 #include <bus/cam/scsi/scsi_da.h> 49 50 #include <sys/kernel.h> 51 52 #include "opt_vpo.h" 53 54 #include <bus/ppbus/ppbconf.h> 55 #include "vpoio.h" 56 57 #include "ppbus_if.h" 58 59 struct vpo_sense { 60 struct scsi_sense cmd; 61 unsigned int stat; 62 unsigned int count; 63 }; 64 65 struct vpo_data { 66 unsigned short vpo_unit; 67 68 int vpo_stat; 69 int vpo_count; 70 int vpo_error; 71 72 int vpo_isplus; 73 74 struct cam_sim *sim; 75 76 struct vpo_sense vpo_sense; 77 78 struct vpoio_data vpo_io; /* interface to low level functions */ 79 }; 80 81 #define DEVTOSOFTC(dev) \ 82 ((struct vpo_data *)device_get_softc(dev)) 83 84 /* cam related functions */ 85 static void vpo_action(struct cam_sim *sim, union ccb *ccb); 86 static void vpo_poll(struct cam_sim *sim); 87 static void vpo_cam_rescan_callback(struct cam_periph *periph, 88 union ccb *ccb); 89 static void vpo_cam_rescan(struct vpo_data *vpo); 90 91 static void 92 vpo_identify(driver_t *driver, device_t parent) 93 { 94 95 BUS_ADD_CHILD(parent, 0, "vpo", 0); 96 } 97 98 /* 99 * vpo_probe() 100 */ 101 static int 102 vpo_probe(device_t dev) 103 { 104 struct vpo_data *vpo; 105 int error; 106 107 vpo = DEVTOSOFTC(dev); 108 bzero(vpo, sizeof(struct vpo_data)); 109 110 /* vpo dependent initialisation */ 111 vpo->vpo_unit = device_get_unit(dev); 112 113 /* low level probe */ 114 vpoio_set_unit(&vpo->vpo_io, vpo->vpo_unit); 115 116 /* check ZIP before ZIP+ or imm_probe() will send controls to 117 * the printer or whatelse connected to the port */ 118 if ((error = vpoio_probe(dev, &vpo->vpo_io)) == 0) { 119 vpo->vpo_isplus = 0; 120 device_set_desc(dev, 121 "Iomega VPI0 Parallel to SCSI interface"); 122 } else if ((error = imm_probe(dev, &vpo->vpo_io)) == 0) { 123 vpo->vpo_isplus = 1; 124 device_set_desc(dev, 125 "Iomega Matchmaker Parallel to SCSI interface"); 126 } else { 127 return (error); 128 } 129 130 return (0); 131 } 132 133 /* 134 * vpo_attach() 135 */ 136 static int 137 vpo_attach(device_t dev) 138 { 139 struct vpo_data *vpo = DEVTOSOFTC(dev); 140 struct cam_devq *devq; 141 int error; 142 143 /* low level attachment */ 144 if (vpo->vpo_isplus) { 145 if ((error = imm_attach(&vpo->vpo_io))) 146 return (error); 147 } else { 148 if ((error = vpoio_attach(&vpo->vpo_io))) 149 return (error); 150 } 151 152 /* 153 ** Now tell the generic SCSI layer 154 ** about our bus. 155 */ 156 devq = cam_simq_alloc(/*maxopenings*/1); 157 /* XXX What about low-level detach on error? */ 158 if (devq == NULL) 159 return (ENXIO); 160 161 vpo->sim = cam_sim_alloc(vpo_action, vpo_poll, "vpo", vpo, 162 device_get_unit(dev), 163 /*untagged*/1, /*tagged*/0, devq); 164 cam_simq_release(devq); 165 if (vpo->sim == NULL) { 166 return (ENXIO); 167 } 168 169 if (xpt_bus_register(vpo->sim, /*bus*/0) != CAM_SUCCESS) { 170 cam_sim_free(vpo->sim); 171 return (ENXIO); 172 } 173 174 /* all went ok */ 175 176 vpo_cam_rescan(vpo); /* have CAM rescan the bus */ 177 178 return (0); 179 } 180 181 static void 182 vpo_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb) 183 { 184 free(ccb, M_TEMP); 185 } 186 187 static void 188 vpo_cam_rescan(struct vpo_data *vpo) 189 { 190 struct cam_path *path; 191 union ccb *ccb = malloc(sizeof(union ccb), M_TEMP, M_WAITOK); 192 193 bzero(ccb, sizeof(union ccb)); 194 195 if (xpt_create_path(&path, xpt_periph, cam_sim_path(vpo->sim), 0, 0) 196 != CAM_REQ_CMP) { 197 /* A failure is benign as the user can do a manual rescan */ 198 return; 199 } 200 201 xpt_setup_ccb(&ccb->ccb_h, path, 5/*priority (low)*/); 202 ccb->ccb_h.func_code = XPT_SCAN_BUS; 203 ccb->ccb_h.cbfcnp = vpo_cam_rescan_callback; 204 ccb->crcn.flags = CAM_FLAG_NONE; 205 xpt_action(ccb); 206 207 /* The scan is in progress now. */ 208 } 209 210 /* 211 * vpo_intr() 212 */ 213 static void 214 vpo_intr(struct vpo_data *vpo, struct ccb_scsiio *csio) 215 { 216 int errno; /* error in errno.h */ 217 int s; 218 #ifdef VP0_DEBUG 219 int i; 220 #endif 221 222 s = splcam(); 223 224 if (vpo->vpo_isplus) { 225 errno = imm_do_scsi(&vpo->vpo_io, VP0_INITIATOR, 226 csio->ccb_h.target_id, 227 (char *)&csio->cdb_io.cdb_bytes, csio->cdb_len, 228 (char *)csio->data_ptr, csio->dxfer_len, 229 &vpo->vpo_stat, &vpo->vpo_count, &vpo->vpo_error); 230 } else { 231 errno = vpoio_do_scsi(&vpo->vpo_io, VP0_INITIATOR, 232 csio->ccb_h.target_id, 233 (char *)&csio->cdb_io.cdb_bytes, csio->cdb_len, 234 (char *)csio->data_ptr, csio->dxfer_len, 235 &vpo->vpo_stat, &vpo->vpo_count, &vpo->vpo_error); 236 } 237 238 #ifdef VP0_DEBUG 239 printf("vpo_do_scsi = %d, status = 0x%x, count = %d, vpo_error = %d\n", 240 errno, vpo->vpo_stat, vpo->vpo_count, vpo->vpo_error); 241 242 /* dump of command */ 243 for (i=0; i<csio->cdb_len; i++) 244 printf("%x ", ((char *)&csio->cdb_io.cdb_bytes)[i]); 245 246 printf("\n"); 247 #endif 248 249 if (errno) { 250 /* connection to ppbus interrupted */ 251 csio->ccb_h.status = CAM_CMD_TIMEOUT; 252 goto error; 253 } 254 255 /* if a timeout occured, no sense */ 256 if (vpo->vpo_error) { 257 if (vpo->vpo_error != VP0_ESELECT_TIMEOUT) 258 printf("vpo%d: VP0 error/timeout (%d)\n", 259 vpo->vpo_unit, vpo->vpo_error); 260 261 csio->ccb_h.status = CAM_CMD_TIMEOUT; 262 goto error; 263 } 264 265 /* check scsi status */ 266 if (vpo->vpo_stat != SCSI_STATUS_OK) { 267 csio->scsi_status = vpo->vpo_stat; 268 269 /* check if we have to sense the drive */ 270 if ((vpo->vpo_stat & SCSI_STATUS_CHECK_COND) != 0) { 271 272 vpo->vpo_sense.cmd.opcode = REQUEST_SENSE; 273 vpo->vpo_sense.cmd.length = csio->sense_len; 274 vpo->vpo_sense.cmd.control = 0; 275 276 if (vpo->vpo_isplus) { 277 errno = imm_do_scsi(&vpo->vpo_io, VP0_INITIATOR, 278 csio->ccb_h.target_id, 279 (char *)&vpo->vpo_sense.cmd, 280 sizeof(vpo->vpo_sense.cmd), 281 (char *)&csio->sense_data, csio->sense_len, 282 &vpo->vpo_sense.stat, &vpo->vpo_sense.count, 283 &vpo->vpo_error); 284 } else { 285 errno = vpoio_do_scsi(&vpo->vpo_io, VP0_INITIATOR, 286 csio->ccb_h.target_id, 287 (char *)&vpo->vpo_sense.cmd, 288 sizeof(vpo->vpo_sense.cmd), 289 (char *)&csio->sense_data, csio->sense_len, 290 &vpo->vpo_sense.stat, &vpo->vpo_sense.count, 291 &vpo->vpo_error); 292 } 293 294 295 #ifdef VP0_DEBUG 296 printf("(sense) vpo_do_scsi = %d, status = 0x%x, count = %d, vpo_error = %d\n", 297 errno, vpo->vpo_sense.stat, vpo->vpo_sense.count, vpo->vpo_error); 298 #endif 299 300 /* check sense return status */ 301 if (errno == 0 && vpo->vpo_sense.stat == SCSI_STATUS_OK) { 302 /* sense ok */ 303 csio->ccb_h.status = CAM_AUTOSNS_VALID | CAM_SCSI_STATUS_ERROR; 304 csio->sense_resid = csio->sense_len - vpo->vpo_sense.count; 305 306 #ifdef VP0_DEBUG 307 /* dump of sense info */ 308 printf("(sense) "); 309 for (i=0; i<vpo->vpo_sense.count; i++) 310 printf("%x ", ((char *)&csio->sense_data)[i]); 311 printf("\n"); 312 #endif 313 314 } else { 315 /* sense failed */ 316 csio->ccb_h.status = CAM_AUTOSENSE_FAIL; 317 } 318 } else { 319 /* no sense */ 320 csio->ccb_h.status = CAM_SCSI_STATUS_ERROR; 321 } 322 323 goto error; 324 } 325 326 csio->resid = csio->dxfer_len - vpo->vpo_count; 327 csio->ccb_h.status = CAM_REQ_CMP; 328 329 error: 330 splx(s); 331 332 return; 333 } 334 335 static void 336 vpo_action(struct cam_sim *sim, union ccb *ccb) 337 { 338 339 struct vpo_data *vpo = (struct vpo_data *)sim->softc; 340 341 switch (ccb->ccb_h.func_code) { 342 case XPT_SCSI_IO: 343 { 344 struct ccb_scsiio *csio; 345 346 csio = &ccb->csio; 347 348 #ifdef VP0_DEBUG 349 printf("vpo%d: XPT_SCSI_IO (0x%x) request\n", 350 vpo->vpo_unit, csio->cdb_io.cdb_bytes[0]); 351 #endif 352 353 vpo_intr(vpo, csio); 354 355 xpt_done(ccb); 356 357 break; 358 } 359 case XPT_CALC_GEOMETRY: 360 { 361 struct ccb_calc_geometry *ccg; 362 363 ccg = &ccb->ccg; 364 365 #ifdef VP0_DEBUG 366 printf("vpo%d: XPT_CALC_GEOMETRY (bs=%d,vs=%d,c=%d,h=%d,spt=%d) request\n", 367 vpo->vpo_unit, 368 ccg->block_size, 369 ccg->volume_size, 370 ccg->cylinders, 371 ccg->heads, 372 ccg->secs_per_track); 373 #endif 374 375 ccg->heads = 64; 376 ccg->secs_per_track = 32; 377 ccg->cylinders = ccg->volume_size / 378 (ccg->heads * ccg->secs_per_track); 379 380 ccb->ccb_h.status = CAM_REQ_CMP; 381 xpt_done(ccb); 382 break; 383 } 384 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 385 { 386 387 #ifdef VP0_DEBUG 388 printf("vpo%d: XPT_RESET_BUS request\n", vpo->vpo_unit); 389 #endif 390 391 if (vpo->vpo_isplus) { 392 if (imm_reset_bus(&vpo->vpo_io)) { 393 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 394 xpt_done(ccb); 395 return; 396 } 397 } else { 398 if (vpoio_reset_bus(&vpo->vpo_io)) { 399 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 400 xpt_done(ccb); 401 return; 402 } 403 } 404 405 ccb->ccb_h.status = CAM_REQ_CMP; 406 xpt_done(ccb); 407 break; 408 } 409 case XPT_PATH_INQ: /* Path routing inquiry */ 410 { 411 struct ccb_pathinq *cpi = &ccb->cpi; 412 413 #ifdef VP0_DEBUG 414 printf("vpo%d: XPT_PATH_INQ request\n", vpo->vpo_unit); 415 #endif 416 cpi->version_num = 1; /* XXX??? */ 417 cpi->hba_inquiry = 0; 418 cpi->target_sprt = 0; 419 cpi->hba_misc = 0; 420 cpi->hba_eng_cnt = 0; 421 cpi->max_target = 7; 422 cpi->max_lun = 0; 423 cpi->initiator_id = VP0_INITIATOR; 424 cpi->bus_id = sim->bus_id; 425 cpi->base_transfer_speed = 93; 426 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 427 strncpy(cpi->hba_vid, "Iomega", HBA_IDLEN); 428 strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN); 429 cpi->unit_number = sim->unit_number; 430 431 cpi->ccb_h.status = CAM_REQ_CMP; 432 xpt_done(ccb); 433 break; 434 } 435 default: 436 ccb->ccb_h.status = CAM_REQ_INVALID; 437 xpt_done(ccb); 438 break; 439 } 440 441 return; 442 } 443 444 static void 445 vpo_poll(struct cam_sim *sim) 446 { 447 /* The ZIP is actually always polled throw vpo_action() */ 448 return; 449 } 450 451 static devclass_t vpo_devclass; 452 453 static device_method_t vpo_methods[] = { 454 /* device interface */ 455 DEVMETHOD(device_identify, vpo_identify), 456 DEVMETHOD(device_probe, vpo_probe), 457 DEVMETHOD(device_attach, vpo_attach), 458 459 { 0, 0 } 460 }; 461 462 static driver_t vpo_driver = { 463 "vpo", 464 vpo_methods, 465 sizeof(struct vpo_data), 466 }; 467 DRIVER_MODULE(vpo, ppbus, vpo_driver, vpo_devclass, 0, 0); 468