1 /* 2 * Copyright © 2012 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 21 * IN THE SOFTWARE. 22 * 23 * Authors: 24 * Eugeni Dodonov <eugeni.dodonov@intel.com> 25 * 26 */ 27 28 #include "i915_drv.h" 29 #include "intel_drv.h" 30 31 struct ddi_buf_trans { 32 u32 trans1; /* balance leg enable, de-emph level */ 33 u32 trans2; /* vref sel, vswing */ 34 u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */ 35 }; 36 37 /* HDMI/DVI modes ignore everything but the last 2 items. So we share 38 * them for both DP and FDI transports, allowing those ports to 39 * automatically adapt to HDMI connections as well 40 */ 41 static const struct ddi_buf_trans hsw_ddi_translations_dp[] = { 42 { 0x00FFFFFF, 0x0006000E, 0x0 }, 43 { 0x00D75FFF, 0x0005000A, 0x0 }, 44 { 0x00C30FFF, 0x00040006, 0x0 }, 45 { 0x80AAAFFF, 0x000B0000, 0x0 }, 46 { 0x00FFFFFF, 0x0005000A, 0x0 }, 47 { 0x00D75FFF, 0x000C0004, 0x0 }, 48 { 0x80C30FFF, 0x000B0000, 0x0 }, 49 { 0x00FFFFFF, 0x00040006, 0x0 }, 50 { 0x80D75FFF, 0x000B0000, 0x0 }, 51 }; 52 53 static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = { 54 { 0x00FFFFFF, 0x0007000E, 0x0 }, 55 { 0x00D75FFF, 0x000F000A, 0x0 }, 56 { 0x00C30FFF, 0x00060006, 0x0 }, 57 { 0x00AAAFFF, 0x001E0000, 0x0 }, 58 { 0x00FFFFFF, 0x000F000A, 0x0 }, 59 { 0x00D75FFF, 0x00160004, 0x0 }, 60 { 0x00C30FFF, 0x001E0000, 0x0 }, 61 { 0x00FFFFFF, 0x00060006, 0x0 }, 62 { 0x00D75FFF, 0x001E0000, 0x0 }, 63 }; 64 65 static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = { 66 /* Idx NT mV d T mV d db */ 67 { 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */ 68 { 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */ 69 { 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */ 70 { 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */ 71 { 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */ 72 { 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */ 73 { 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */ 74 { 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */ 75 { 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */ 76 { 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */ 77 { 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */ 78 { 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */ 79 }; 80 81 static const struct ddi_buf_trans bdw_ddi_translations_edp[] = { 82 { 0x00FFFFFF, 0x00000012, 0x0 }, 83 { 0x00EBAFFF, 0x00020011, 0x0 }, 84 { 0x00C71FFF, 0x0006000F, 0x0 }, 85 { 0x00AAAFFF, 0x000E000A, 0x0 }, 86 { 0x00FFFFFF, 0x00020011, 0x0 }, 87 { 0x00DB6FFF, 0x0005000F, 0x0 }, 88 { 0x00BEEFFF, 0x000A000C, 0x0 }, 89 { 0x00FFFFFF, 0x0005000F, 0x0 }, 90 { 0x00DB6FFF, 0x000A000C, 0x0 }, 91 }; 92 93 static const struct ddi_buf_trans bdw_ddi_translations_dp[] = { 94 { 0x00FFFFFF, 0x0007000E, 0x0 }, 95 { 0x00D75FFF, 0x000E000A, 0x0 }, 96 { 0x00BEFFFF, 0x00140006, 0x0 }, 97 { 0x80B2CFFF, 0x001B0002, 0x0 }, 98 { 0x00FFFFFF, 0x000E000A, 0x0 }, 99 { 0x00DB6FFF, 0x00160005, 0x0 }, 100 { 0x80C71FFF, 0x001A0002, 0x0 }, 101 { 0x00F7DFFF, 0x00180004, 0x0 }, 102 { 0x80D75FFF, 0x001B0002, 0x0 }, 103 }; 104 105 static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = { 106 { 0x00FFFFFF, 0x0001000E, 0x0 }, 107 { 0x00D75FFF, 0x0004000A, 0x0 }, 108 { 0x00C30FFF, 0x00070006, 0x0 }, 109 { 0x00AAAFFF, 0x000C0000, 0x0 }, 110 { 0x00FFFFFF, 0x0004000A, 0x0 }, 111 { 0x00D75FFF, 0x00090004, 0x0 }, 112 { 0x00C30FFF, 0x000C0000, 0x0 }, 113 { 0x00FFFFFF, 0x00070006, 0x0 }, 114 { 0x00D75FFF, 0x000C0000, 0x0 }, 115 }; 116 117 static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = { 118 /* Idx NT mV d T mV df db */ 119 { 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */ 120 { 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */ 121 { 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */ 122 { 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */ 123 { 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */ 124 { 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */ 125 { 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */ 126 { 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */ 127 { 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */ 128 { 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */ 129 }; 130 131 /* Skylake H and S */ 132 static const struct ddi_buf_trans skl_ddi_translations_dp[] = { 133 { 0x00002016, 0x000000A0, 0x0 }, 134 { 0x00005012, 0x0000009B, 0x0 }, 135 { 0x00007011, 0x00000088, 0x0 }, 136 { 0x80009010, 0x000000C0, 0x1 }, 137 { 0x00002016, 0x0000009B, 0x0 }, 138 { 0x00005012, 0x00000088, 0x0 }, 139 { 0x80007011, 0x000000C0, 0x1 }, 140 { 0x00002016, 0x000000DF, 0x0 }, 141 { 0x80005012, 0x000000C0, 0x1 }, 142 }; 143 144 /* Skylake U */ 145 static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { 146 { 0x0000201B, 0x000000A2, 0x0 }, 147 { 0x00005012, 0x00000088, 0x0 }, 148 { 0x80007011, 0x000000CD, 0x1 }, 149 { 0x80009010, 0x000000C0, 0x1 }, 150 { 0x0000201B, 0x0000009D, 0x0 }, 151 { 0x80005012, 0x000000C0, 0x1 }, 152 { 0x80007011, 0x000000C0, 0x1 }, 153 { 0x00002016, 0x00000088, 0x0 }, 154 { 0x80005012, 0x000000C0, 0x1 }, 155 }; 156 157 /* Skylake Y */ 158 static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { 159 { 0x00000018, 0x000000A2, 0x0 }, 160 { 0x00005012, 0x00000088, 0x0 }, 161 { 0x80007011, 0x000000CD, 0x3 }, 162 { 0x80009010, 0x000000C0, 0x3 }, 163 { 0x00000018, 0x0000009D, 0x0 }, 164 { 0x80005012, 0x000000C0, 0x3 }, 165 { 0x80007011, 0x000000C0, 0x3 }, 166 { 0x00000018, 0x00000088, 0x0 }, 167 { 0x80005012, 0x000000C0, 0x3 }, 168 }; 169 170 /* Kabylake H and S */ 171 static const struct ddi_buf_trans kbl_ddi_translations_dp[] = { 172 { 0x00002016, 0x000000A0, 0x0 }, 173 { 0x00005012, 0x0000009B, 0x0 }, 174 { 0x00007011, 0x00000088, 0x0 }, 175 { 0x80009010, 0x000000C0, 0x1 }, 176 { 0x00002016, 0x0000009B, 0x0 }, 177 { 0x00005012, 0x00000088, 0x0 }, 178 { 0x80007011, 0x000000C0, 0x1 }, 179 { 0x00002016, 0x00000097, 0x0 }, 180 { 0x80005012, 0x000000C0, 0x1 }, 181 }; 182 183 /* Kabylake U */ 184 static const struct ddi_buf_trans kbl_u_ddi_translations_dp[] = { 185 { 0x0000201B, 0x000000A1, 0x0 }, 186 { 0x00005012, 0x00000088, 0x0 }, 187 { 0x80007011, 0x000000CD, 0x3 }, 188 { 0x80009010, 0x000000C0, 0x3 }, 189 { 0x0000201B, 0x0000009D, 0x0 }, 190 { 0x80005012, 0x000000C0, 0x3 }, 191 { 0x80007011, 0x000000C0, 0x3 }, 192 { 0x00002016, 0x0000004F, 0x0 }, 193 { 0x80005012, 0x000000C0, 0x3 }, 194 }; 195 196 /* Kabylake Y */ 197 static const struct ddi_buf_trans kbl_y_ddi_translations_dp[] = { 198 { 0x00001017, 0x000000A1, 0x0 }, 199 { 0x00005012, 0x00000088, 0x0 }, 200 { 0x80007011, 0x000000CD, 0x3 }, 201 { 0x8000800F, 0x000000C0, 0x3 }, 202 { 0x00001017, 0x0000009D, 0x0 }, 203 { 0x80005012, 0x000000C0, 0x3 }, 204 { 0x80007011, 0x000000C0, 0x3 }, 205 { 0x00001017, 0x0000004C, 0x0 }, 206 { 0x80005012, 0x000000C0, 0x3 }, 207 }; 208 209 /* 210 * Skylake/Kabylake H and S 211 * eDP 1.4 low vswing translation parameters 212 */ 213 static const struct ddi_buf_trans skl_ddi_translations_edp[] = { 214 { 0x00000018, 0x000000A8, 0x0 }, 215 { 0x00004013, 0x000000A9, 0x0 }, 216 { 0x00007011, 0x000000A2, 0x0 }, 217 { 0x00009010, 0x0000009C, 0x0 }, 218 { 0x00000018, 0x000000A9, 0x0 }, 219 { 0x00006013, 0x000000A2, 0x0 }, 220 { 0x00007011, 0x000000A6, 0x0 }, 221 { 0x00000018, 0x000000AB, 0x0 }, 222 { 0x00007013, 0x0000009F, 0x0 }, 223 { 0x00000018, 0x000000DF, 0x0 }, 224 }; 225 226 /* 227 * Skylake/Kabylake U 228 * eDP 1.4 low vswing translation parameters 229 */ 230 static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = { 231 { 0x00000018, 0x000000A8, 0x0 }, 232 { 0x00004013, 0x000000A9, 0x0 }, 233 { 0x00007011, 0x000000A2, 0x0 }, 234 { 0x00009010, 0x0000009C, 0x0 }, 235 { 0x00000018, 0x000000A9, 0x0 }, 236 { 0x00006013, 0x000000A2, 0x0 }, 237 { 0x00007011, 0x000000A6, 0x0 }, 238 { 0x00002016, 0x000000AB, 0x0 }, 239 { 0x00005013, 0x0000009F, 0x0 }, 240 { 0x00000018, 0x000000DF, 0x0 }, 241 }; 242 243 /* 244 * Skylake/Kabylake Y 245 * eDP 1.4 low vswing translation parameters 246 */ 247 static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = { 248 { 0x00000018, 0x000000A8, 0x0 }, 249 { 0x00004013, 0x000000AB, 0x0 }, 250 { 0x00007011, 0x000000A4, 0x0 }, 251 { 0x00009010, 0x000000DF, 0x0 }, 252 { 0x00000018, 0x000000AA, 0x0 }, 253 { 0x00006013, 0x000000A4, 0x0 }, 254 { 0x00007011, 0x0000009D, 0x0 }, 255 { 0x00000018, 0x000000A0, 0x0 }, 256 { 0x00006012, 0x000000DF, 0x0 }, 257 { 0x00000018, 0x0000008A, 0x0 }, 258 }; 259 260 /* Skylake/Kabylake U, H and S */ 261 static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = { 262 { 0x00000018, 0x000000AC, 0x0 }, 263 { 0x00005012, 0x0000009D, 0x0 }, 264 { 0x00007011, 0x00000088, 0x0 }, 265 { 0x00000018, 0x000000A1, 0x0 }, 266 { 0x00000018, 0x00000098, 0x0 }, 267 { 0x00004013, 0x00000088, 0x0 }, 268 { 0x80006012, 0x000000CD, 0x1 }, 269 { 0x00000018, 0x000000DF, 0x0 }, 270 { 0x80003015, 0x000000CD, 0x1 }, /* Default */ 271 { 0x80003015, 0x000000C0, 0x1 }, 272 { 0x80000018, 0x000000C0, 0x1 }, 273 }; 274 275 /* Skylake/Kabylake Y */ 276 static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = { 277 { 0x00000018, 0x000000A1, 0x0 }, 278 { 0x00005012, 0x000000DF, 0x0 }, 279 { 0x80007011, 0x000000CB, 0x3 }, 280 { 0x00000018, 0x000000A4, 0x0 }, 281 { 0x00000018, 0x0000009D, 0x0 }, 282 { 0x00004013, 0x00000080, 0x0 }, 283 { 0x80006013, 0x000000C0, 0x3 }, 284 { 0x00000018, 0x0000008A, 0x0 }, 285 { 0x80003015, 0x000000C0, 0x3 }, /* Default */ 286 { 0x80003015, 0x000000C0, 0x3 }, 287 { 0x80000018, 0x000000C0, 0x3 }, 288 }; 289 290 struct bxt_ddi_buf_trans { 291 u32 margin; /* swing value */ 292 u32 scale; /* scale value */ 293 u32 enable; /* scale enable */ 294 u32 deemphasis; 295 bool default_index; /* true if the entry represents default value */ 296 }; 297 298 static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = { 299 /* Idx NT mV diff db */ 300 { 52, 0x9A, 0, 128, true }, /* 0: 400 0 */ 301 { 78, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ 302 { 104, 0x9A, 0, 64, false }, /* 2: 400 6 */ 303 { 154, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ 304 { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ 305 { 116, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ 306 { 154, 0x9A, 0, 64, false }, /* 6: 600 6 */ 307 { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ 308 { 154, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ 309 { 154, 0x9A, 1, 128, false }, /* 9: 1200 0 */ 310 }; 311 312 static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = { 313 /* Idx NT mV diff db */ 314 { 26, 0, 0, 128, false }, /* 0: 200 0 */ 315 { 38, 0, 0, 112, false }, /* 1: 200 1.5 */ 316 { 48, 0, 0, 96, false }, /* 2: 200 4 */ 317 { 54, 0, 0, 69, false }, /* 3: 200 6 */ 318 { 32, 0, 0, 128, false }, /* 4: 250 0 */ 319 { 48, 0, 0, 104, false }, /* 5: 250 1.5 */ 320 { 54, 0, 0, 85, false }, /* 6: 250 4 */ 321 { 43, 0, 0, 128, false }, /* 7: 300 0 */ 322 { 54, 0, 0, 101, false }, /* 8: 300 1.5 */ 323 { 48, 0, 0, 128, false }, /* 9: 300 0 */ 324 }; 325 326 /* BSpec has 2 recommended values - entries 0 and 8. 327 * Using the entry with higher vswing. 328 */ 329 static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = { 330 /* Idx NT mV diff db */ 331 { 52, 0x9A, 0, 128, false }, /* 0: 400 0 */ 332 { 52, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ 333 { 52, 0x9A, 0, 64, false }, /* 2: 400 6 */ 334 { 42, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ 335 { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ 336 { 77, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ 337 { 77, 0x9A, 0, 64, false }, /* 6: 600 6 */ 338 { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ 339 { 102, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ 340 { 154, 0x9A, 1, 128, true }, /* 9: 1200 0 */ 341 }; 342 343 enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder) 344 { 345 switch (encoder->type) { 346 case INTEL_OUTPUT_DP_MST: 347 return enc_to_mst(&encoder->base)->primary->port; 348 case INTEL_OUTPUT_DP: 349 case INTEL_OUTPUT_EDP: 350 case INTEL_OUTPUT_HDMI: 351 case INTEL_OUTPUT_UNKNOWN: 352 return enc_to_dig_port(&encoder->base)->port; 353 case INTEL_OUTPUT_ANALOG: 354 return PORT_E; 355 default: 356 MISSING_CASE(encoder->type); 357 return PORT_A; 358 } 359 } 360 361 static const struct ddi_buf_trans * 362 bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) 363 { 364 if (dev_priv->vbt.edp.low_vswing) { 365 *n_entries = ARRAY_SIZE(bdw_ddi_translations_edp); 366 return bdw_ddi_translations_edp; 367 } else { 368 *n_entries = ARRAY_SIZE(bdw_ddi_translations_dp); 369 return bdw_ddi_translations_dp; 370 } 371 } 372 373 static const struct ddi_buf_trans * 374 skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) 375 { 376 if (IS_SKL_ULX(dev_priv)) { 377 *n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp); 378 return skl_y_ddi_translations_dp; 379 } else if (IS_SKL_ULT(dev_priv)) { 380 *n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp); 381 return skl_u_ddi_translations_dp; 382 } else { 383 *n_entries = ARRAY_SIZE(skl_ddi_translations_dp); 384 return skl_ddi_translations_dp; 385 } 386 } 387 388 static const struct ddi_buf_trans * 389 kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) 390 { 391 if (IS_KBL_ULX(dev_priv)) { 392 *n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp); 393 return kbl_y_ddi_translations_dp; 394 } else if (IS_KBL_ULT(dev_priv)) { 395 *n_entries = ARRAY_SIZE(kbl_u_ddi_translations_dp); 396 return kbl_u_ddi_translations_dp; 397 } else { 398 *n_entries = ARRAY_SIZE(kbl_ddi_translations_dp); 399 return kbl_ddi_translations_dp; 400 } 401 } 402 403 static const struct ddi_buf_trans * 404 skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) 405 { 406 if (dev_priv->vbt.edp.low_vswing) { 407 if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { 408 *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); 409 return skl_y_ddi_translations_edp; 410 } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv)) { 411 *n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp); 412 return skl_u_ddi_translations_edp; 413 } else { 414 *n_entries = ARRAY_SIZE(skl_ddi_translations_edp); 415 return skl_ddi_translations_edp; 416 } 417 } 418 419 if (IS_KABYLAKE(dev_priv)) 420 return kbl_get_buf_trans_dp(dev_priv, n_entries); 421 else 422 return skl_get_buf_trans_dp(dev_priv, n_entries); 423 } 424 425 static const struct ddi_buf_trans * 426 skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) 427 { 428 if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { 429 *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); 430 return skl_y_ddi_translations_hdmi; 431 } else { 432 *n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi); 433 return skl_ddi_translations_hdmi; 434 } 435 } 436 437 static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port) 438 { 439 int n_hdmi_entries; 440 int hdmi_level; 441 int hdmi_default_entry; 442 443 hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; 444 445 if (IS_BROXTON(dev_priv)) 446 return hdmi_level; 447 448 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { 449 skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); 450 hdmi_default_entry = 8; 451 } else if (IS_BROADWELL(dev_priv)) { 452 n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); 453 hdmi_default_entry = 7; 454 } else if (IS_HASWELL(dev_priv)) { 455 n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); 456 hdmi_default_entry = 6; 457 } else { 458 WARN(1, "ddi translation table missing\n"); 459 n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); 460 hdmi_default_entry = 7; 461 } 462 463 /* Choose a good default if VBT is badly populated */ 464 if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || 465 hdmi_level >= n_hdmi_entries) 466 hdmi_level = hdmi_default_entry; 467 468 return hdmi_level; 469 } 470 471 /* 472 * Starting with Haswell, DDI port buffers must be programmed with correct 473 * values in advance. This function programs the correct values for 474 * DP/eDP/FDI use cases. 475 */ 476 void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder) 477 { 478 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 479 u32 iboost_bit = 0; 480 int i, n_dp_entries, n_edp_entries, size; 481 enum port port = intel_ddi_get_encoder_port(encoder); 482 const struct ddi_buf_trans *ddi_translations_fdi; 483 const struct ddi_buf_trans *ddi_translations_dp; 484 const struct ddi_buf_trans *ddi_translations_edp; 485 const struct ddi_buf_trans *ddi_translations; 486 487 if (IS_BROXTON(dev_priv)) 488 return; 489 490 if (IS_KABYLAKE(dev_priv)) { 491 ddi_translations_fdi = NULL; 492 ddi_translations_dp = 493 kbl_get_buf_trans_dp(dev_priv, &n_dp_entries); 494 ddi_translations_edp = 495 skl_get_buf_trans_edp(dev_priv, &n_edp_entries); 496 } else if (IS_SKYLAKE(dev_priv)) { 497 ddi_translations_fdi = NULL; 498 ddi_translations_dp = 499 skl_get_buf_trans_dp(dev_priv, &n_dp_entries); 500 ddi_translations_edp = 501 skl_get_buf_trans_edp(dev_priv, &n_edp_entries); 502 } else if (IS_BROADWELL(dev_priv)) { 503 ddi_translations_fdi = bdw_ddi_translations_fdi; 504 ddi_translations_dp = bdw_ddi_translations_dp; 505 ddi_translations_edp = bdw_get_buf_trans_edp(dev_priv, &n_edp_entries); 506 n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); 507 } else if (IS_HASWELL(dev_priv)) { 508 ddi_translations_fdi = hsw_ddi_translations_fdi; 509 ddi_translations_dp = hsw_ddi_translations_dp; 510 ddi_translations_edp = hsw_ddi_translations_dp; 511 n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp); 512 } else { 513 WARN(1, "ddi translation table missing\n"); 514 ddi_translations_edp = bdw_ddi_translations_dp; 515 ddi_translations_fdi = bdw_ddi_translations_fdi; 516 ddi_translations_dp = bdw_ddi_translations_dp; 517 n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); 518 n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); 519 } 520 521 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { 522 /* If we're boosting the current, set bit 31 of trans1 */ 523 if (dev_priv->vbt.ddi_port_info[port].dp_boost_level) 524 iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; 525 526 if (WARN_ON(encoder->type == INTEL_OUTPUT_EDP && 527 port != PORT_A && port != PORT_E && 528 n_edp_entries > 9)) 529 n_edp_entries = 9; 530 } 531 532 switch (encoder->type) { 533 case INTEL_OUTPUT_EDP: 534 ddi_translations = ddi_translations_edp; 535 size = n_edp_entries; 536 break; 537 case INTEL_OUTPUT_DP: 538 ddi_translations = ddi_translations_dp; 539 size = n_dp_entries; 540 break; 541 case INTEL_OUTPUT_ANALOG: 542 ddi_translations = ddi_translations_fdi; 543 size = n_dp_entries; 544 break; 545 default: 546 BUG(); 547 } 548 549 for (i = 0; i < size; i++) { 550 I915_WRITE(DDI_BUF_TRANS_LO(port, i), 551 ddi_translations[i].trans1 | iboost_bit); 552 I915_WRITE(DDI_BUF_TRANS_HI(port, i), 553 ddi_translations[i].trans2); 554 } 555 } 556 557 /* 558 * Starting with Haswell, DDI port buffers must be programmed with correct 559 * values in advance. This function programs the correct values for 560 * HDMI/DVI use cases. 561 */ 562 static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder) 563 { 564 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 565 u32 iboost_bit = 0; 566 int n_hdmi_entries, hdmi_level; 567 enum port port = intel_ddi_get_encoder_port(encoder); 568 const struct ddi_buf_trans *ddi_translations_hdmi; 569 570 if (IS_BROXTON(dev_priv)) 571 return; 572 573 hdmi_level = intel_ddi_hdmi_level(dev_priv, port); 574 575 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { 576 ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); 577 578 /* If we're boosting the current, set bit 31 of trans1 */ 579 if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level) 580 iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; 581 } else if (IS_BROADWELL(dev_priv)) { 582 ddi_translations_hdmi = bdw_ddi_translations_hdmi; 583 n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); 584 } else if (IS_HASWELL(dev_priv)) { 585 ddi_translations_hdmi = hsw_ddi_translations_hdmi; 586 n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); 587 } else { 588 WARN(1, "ddi translation table missing\n"); 589 ddi_translations_hdmi = bdw_ddi_translations_hdmi; 590 n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); 591 } 592 593 /* Entry 9 is for HDMI: */ 594 I915_WRITE(DDI_BUF_TRANS_LO(port, 9), 595 ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit); 596 I915_WRITE(DDI_BUF_TRANS_HI(port, 9), 597 ddi_translations_hdmi[hdmi_level].trans2); 598 } 599 600 static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, 601 enum port port) 602 { 603 i915_reg_t reg = DDI_BUF_CTL(port); 604 int i; 605 606 for (i = 0; i < 16; i++) { 607 udelay(1); 608 if (I915_READ(reg) & DDI_BUF_IS_IDLE) 609 return; 610 } 611 DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port)); 612 } 613 614 static uint32_t hsw_pll_to_ddi_pll_sel(struct intel_shared_dpll *pll) 615 { 616 switch (pll->id) { 617 case DPLL_ID_WRPLL1: 618 return PORT_CLK_SEL_WRPLL1; 619 case DPLL_ID_WRPLL2: 620 return PORT_CLK_SEL_WRPLL2; 621 case DPLL_ID_SPLL: 622 return PORT_CLK_SEL_SPLL; 623 case DPLL_ID_LCPLL_810: 624 return PORT_CLK_SEL_LCPLL_810; 625 case DPLL_ID_LCPLL_1350: 626 return PORT_CLK_SEL_LCPLL_1350; 627 case DPLL_ID_LCPLL_2700: 628 return PORT_CLK_SEL_LCPLL_2700; 629 default: 630 MISSING_CASE(pll->id); 631 return PORT_CLK_SEL_NONE; 632 } 633 } 634 635 /* Starting with Haswell, different DDI ports can work in FDI mode for 636 * connection to the PCH-located connectors. For this, it is necessary to train 637 * both the DDI port and PCH receiver for the desired DDI buffer settings. 638 * 639 * The recommended port to work in FDI mode is DDI E, which we use here. Also, 640 * please note that when FDI mode is active on DDI E, it shares 2 lines with 641 * DDI A (which is used for eDP) 642 */ 643 644 void hsw_fdi_link_train(struct drm_crtc *crtc) 645 { 646 struct drm_device *dev = crtc->dev; 647 struct drm_i915_private *dev_priv = to_i915(dev); 648 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 649 struct intel_encoder *encoder; 650 u32 temp, i, rx_ctl_val, ddi_pll_sel; 651 652 for_each_encoder_on_crtc(dev, crtc, encoder) { 653 WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG); 654 intel_prepare_dp_ddi_buffers(encoder); 655 } 656 657 /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the 658 * mode set "sequence for CRT port" document: 659 * - TP1 to TP2 time with the default value 660 * - FDI delay to 90h 661 * 662 * WaFDIAutoLinkSetTimingOverrride:hsw 663 */ 664 I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) | 665 FDI_RX_PWRDN_LANE0_VAL(2) | 666 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); 667 668 /* Enable the PCH Receiver FDI PLL */ 669 rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | 670 FDI_RX_PLL_ENABLE | 671 FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes); 672 I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); 673 POSTING_READ(FDI_RX_CTL(PIPE_A)); 674 udelay(220); 675 676 /* Switch from Rawclk to PCDclk */ 677 rx_ctl_val |= FDI_PCDCLK; 678 I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); 679 680 /* Configure Port Clock Select */ 681 ddi_pll_sel = hsw_pll_to_ddi_pll_sel(intel_crtc->config->shared_dpll); 682 I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel); 683 WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL); 684 685 /* Start the training iterating through available voltages and emphasis, 686 * testing each value twice. */ 687 for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) { 688 /* Configure DP_TP_CTL with auto-training */ 689 I915_WRITE(DP_TP_CTL(PORT_E), 690 DP_TP_CTL_FDI_AUTOTRAIN | 691 DP_TP_CTL_ENHANCED_FRAME_ENABLE | 692 DP_TP_CTL_LINK_TRAIN_PAT1 | 693 DP_TP_CTL_ENABLE); 694 695 /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. 696 * DDI E does not support port reversal, the functionality is 697 * achieved on the PCH side in FDI_RX_CTL, so no need to set the 698 * port reversal bit */ 699 I915_WRITE(DDI_BUF_CTL(PORT_E), 700 DDI_BUF_CTL_ENABLE | 701 ((intel_crtc->config->fdi_lanes - 1) << 1) | 702 DDI_BUF_TRANS_SELECT(i / 2)); 703 POSTING_READ(DDI_BUF_CTL(PORT_E)); 704 705 udelay(600); 706 707 /* Program PCH FDI Receiver TU */ 708 I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); 709 710 /* Enable PCH FDI Receiver with auto-training */ 711 rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; 712 I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); 713 POSTING_READ(FDI_RX_CTL(PIPE_A)); 714 715 /* Wait for FDI receiver lane calibration */ 716 udelay(30); 717 718 /* Unset FDI_RX_MISC pwrdn lanes */ 719 temp = I915_READ(FDI_RX_MISC(PIPE_A)); 720 temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); 721 I915_WRITE(FDI_RX_MISC(PIPE_A), temp); 722 POSTING_READ(FDI_RX_MISC(PIPE_A)); 723 724 /* Wait for FDI auto training time */ 725 udelay(5); 726 727 temp = I915_READ(DP_TP_STATUS(PORT_E)); 728 if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { 729 DRM_DEBUG_KMS("FDI link training done on step %d\n", i); 730 break; 731 } 732 733 /* 734 * Leave things enabled even if we failed to train FDI. 735 * Results in less fireworks from the state checker. 736 */ 737 if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) { 738 DRM_ERROR("FDI link training failed!\n"); 739 break; 740 } 741 742 rx_ctl_val &= ~FDI_RX_ENABLE; 743 I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); 744 POSTING_READ(FDI_RX_CTL(PIPE_A)); 745 746 temp = I915_READ(DDI_BUF_CTL(PORT_E)); 747 temp &= ~DDI_BUF_CTL_ENABLE; 748 I915_WRITE(DDI_BUF_CTL(PORT_E), temp); 749 POSTING_READ(DDI_BUF_CTL(PORT_E)); 750 751 /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ 752 temp = I915_READ(DP_TP_CTL(PORT_E)); 753 temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); 754 temp |= DP_TP_CTL_LINK_TRAIN_PAT1; 755 I915_WRITE(DP_TP_CTL(PORT_E), temp); 756 POSTING_READ(DP_TP_CTL(PORT_E)); 757 758 intel_wait_ddi_buf_idle(dev_priv, PORT_E); 759 760 /* Reset FDI_RX_MISC pwrdn lanes */ 761 temp = I915_READ(FDI_RX_MISC(PIPE_A)); 762 temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); 763 temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); 764 I915_WRITE(FDI_RX_MISC(PIPE_A), temp); 765 POSTING_READ(FDI_RX_MISC(PIPE_A)); 766 } 767 768 /* Enable normal pixel sending for FDI */ 769 I915_WRITE(DP_TP_CTL(PORT_E), 770 DP_TP_CTL_FDI_AUTOTRAIN | 771 DP_TP_CTL_LINK_TRAIN_NORMAL | 772 DP_TP_CTL_ENHANCED_FRAME_ENABLE | 773 DP_TP_CTL_ENABLE); 774 } 775 776 void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder) 777 { 778 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); 779 struct intel_digital_port *intel_dig_port = 780 enc_to_dig_port(&encoder->base); 781 782 intel_dp->DP = intel_dig_port->saved_port_bits | 783 DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0); 784 intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); 785 } 786 787 static struct intel_encoder * 788 intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) 789 { 790 struct drm_device *dev = crtc->dev; 791 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 792 struct intel_encoder *intel_encoder, *ret = NULL; 793 int num_encoders = 0; 794 795 for_each_encoder_on_crtc(dev, crtc, intel_encoder) { 796 ret = intel_encoder; 797 num_encoders++; 798 } 799 800 if (num_encoders != 1) 801 WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, 802 pipe_name(intel_crtc->pipe)); 803 804 BUG_ON(ret == NULL); 805 return ret; 806 } 807 808 struct intel_encoder * 809 intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state) 810 { 811 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); 812 struct intel_encoder *ret = NULL; 813 struct drm_atomic_state *state; 814 struct drm_connector *connector; 815 struct drm_connector_state *connector_state; 816 int num_encoders = 0; 817 int i; 818 819 state = crtc_state->base.state; 820 821 for_each_connector_in_state(state, connector, connector_state, i) { 822 if (connector_state->crtc != crtc_state->base.crtc) 823 continue; 824 825 ret = to_intel_encoder(connector_state->best_encoder); 826 num_encoders++; 827 } 828 829 WARN(num_encoders != 1, "%d encoders on crtc for pipe %c\n", num_encoders, 830 pipe_name(crtc->pipe)); 831 832 BUG_ON(ret == NULL); 833 return ret; 834 } 835 836 #define LC_FREQ 2700 837 838 static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, 839 i915_reg_t reg) 840 { 841 int refclk = LC_FREQ; 842 int n, p, r; 843 u32 wrpll; 844 845 wrpll = I915_READ(reg); 846 switch (wrpll & WRPLL_PLL_REF_MASK) { 847 case WRPLL_PLL_SSC: 848 case WRPLL_PLL_NON_SSC: 849 /* 850 * We could calculate spread here, but our checking 851 * code only cares about 5% accuracy, and spread is a max of 852 * 0.5% downspread. 853 */ 854 refclk = 135; 855 break; 856 case WRPLL_PLL_LCPLL: 857 refclk = LC_FREQ; 858 break; 859 default: 860 WARN(1, "bad wrpll refclk\n"); 861 return 0; 862 } 863 864 r = wrpll & WRPLL_DIVIDER_REF_MASK; 865 p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT; 866 n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT; 867 868 /* Convert to KHz, p & r have a fixed point portion */ 869 return (refclk * n * 100) / (p * r); 870 } 871 872 static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv, 873 uint32_t dpll) 874 { 875 i915_reg_t cfgcr1_reg, cfgcr2_reg; 876 uint32_t cfgcr1_val, cfgcr2_val; 877 uint32_t p0, p1, p2, dco_freq; 878 879 cfgcr1_reg = DPLL_CFGCR1(dpll); 880 cfgcr2_reg = DPLL_CFGCR2(dpll); 881 882 cfgcr1_val = I915_READ(cfgcr1_reg); 883 cfgcr2_val = I915_READ(cfgcr2_reg); 884 885 p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK; 886 p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK; 887 888 if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1)) 889 p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8; 890 else 891 p1 = 1; 892 893 894 switch (p0) { 895 case DPLL_CFGCR2_PDIV_1: 896 p0 = 1; 897 break; 898 case DPLL_CFGCR2_PDIV_2: 899 p0 = 2; 900 break; 901 case DPLL_CFGCR2_PDIV_3: 902 p0 = 3; 903 break; 904 case DPLL_CFGCR2_PDIV_7: 905 p0 = 7; 906 break; 907 } 908 909 switch (p2) { 910 case DPLL_CFGCR2_KDIV_5: 911 p2 = 5; 912 break; 913 case DPLL_CFGCR2_KDIV_2: 914 p2 = 2; 915 break; 916 case DPLL_CFGCR2_KDIV_3: 917 p2 = 3; 918 break; 919 case DPLL_CFGCR2_KDIV_1: 920 p2 = 1; 921 break; 922 } 923 924 dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000; 925 926 dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 * 927 1000) / 0x8000; 928 929 return dco_freq / (p0 * p1 * p2 * 5); 930 } 931 932 static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) 933 { 934 int dotclock; 935 936 if (pipe_config->has_pch_encoder) 937 dotclock = intel_dotclock_calculate(pipe_config->port_clock, 938 &pipe_config->fdi_m_n); 939 else if (intel_crtc_has_dp_encoder(pipe_config)) 940 dotclock = intel_dotclock_calculate(pipe_config->port_clock, 941 &pipe_config->dp_m_n); 942 else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36) 943 dotclock = pipe_config->port_clock * 2 / 3; 944 else 945 dotclock = pipe_config->port_clock; 946 947 if (pipe_config->pixel_multiplier) 948 dotclock /= pipe_config->pixel_multiplier; 949 950 pipe_config->base.adjusted_mode.crtc_clock = dotclock; 951 } 952 953 static void skl_ddi_clock_get(struct intel_encoder *encoder, 954 struct intel_crtc_state *pipe_config) 955 { 956 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 957 int link_clock = 0; 958 uint32_t dpll_ctl1, dpll; 959 960 dpll = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll); 961 962 dpll_ctl1 = I915_READ(DPLL_CTRL1); 963 964 if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) { 965 link_clock = skl_calc_wrpll_link(dev_priv, dpll); 966 } else { 967 link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll); 968 link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll); 969 970 switch (link_clock) { 971 case DPLL_CTRL1_LINK_RATE_810: 972 link_clock = 81000; 973 break; 974 case DPLL_CTRL1_LINK_RATE_1080: 975 link_clock = 108000; 976 break; 977 case DPLL_CTRL1_LINK_RATE_1350: 978 link_clock = 135000; 979 break; 980 case DPLL_CTRL1_LINK_RATE_1620: 981 link_clock = 162000; 982 break; 983 case DPLL_CTRL1_LINK_RATE_2160: 984 link_clock = 216000; 985 break; 986 case DPLL_CTRL1_LINK_RATE_2700: 987 link_clock = 270000; 988 break; 989 default: 990 WARN(1, "Unsupported link rate\n"); 991 break; 992 } 993 link_clock *= 2; 994 } 995 996 pipe_config->port_clock = link_clock; 997 998 ddi_dotclock_get(pipe_config); 999 } 1000 1001 static void hsw_ddi_clock_get(struct intel_encoder *encoder, 1002 struct intel_crtc_state *pipe_config) 1003 { 1004 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1005 int link_clock = 0; 1006 u32 val, pll; 1007 1008 val = hsw_pll_to_ddi_pll_sel(pipe_config->shared_dpll); 1009 switch (val & PORT_CLK_SEL_MASK) { 1010 case PORT_CLK_SEL_LCPLL_810: 1011 link_clock = 81000; 1012 break; 1013 case PORT_CLK_SEL_LCPLL_1350: 1014 link_clock = 135000; 1015 break; 1016 case PORT_CLK_SEL_LCPLL_2700: 1017 link_clock = 270000; 1018 break; 1019 case PORT_CLK_SEL_WRPLL1: 1020 link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0)); 1021 break; 1022 case PORT_CLK_SEL_WRPLL2: 1023 link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1)); 1024 break; 1025 case PORT_CLK_SEL_SPLL: 1026 pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK; 1027 if (pll == SPLL_PLL_FREQ_810MHz) 1028 link_clock = 81000; 1029 else if (pll == SPLL_PLL_FREQ_1350MHz) 1030 link_clock = 135000; 1031 else if (pll == SPLL_PLL_FREQ_2700MHz) 1032 link_clock = 270000; 1033 else { 1034 WARN(1, "bad spll freq\n"); 1035 return; 1036 } 1037 break; 1038 default: 1039 WARN(1, "bad port clock sel\n"); 1040 return; 1041 } 1042 1043 pipe_config->port_clock = link_clock * 2; 1044 1045 ddi_dotclock_get(pipe_config); 1046 } 1047 1048 static int bxt_calc_pll_link(struct drm_i915_private *dev_priv, 1049 enum intel_dpll_id dpll) 1050 { 1051 struct intel_shared_dpll *pll; 1052 struct intel_dpll_hw_state *state; 1053 struct dpll clock; 1054 1055 /* For DDI ports we always use a shared PLL. */ 1056 if (WARN_ON(dpll == DPLL_ID_PRIVATE)) 1057 return 0; 1058 1059 pll = &dev_priv->shared_dplls[dpll]; 1060 state = &pll->config.hw_state; 1061 1062 clock.m1 = 2; 1063 clock.m2 = (state->pll0 & PORT_PLL_M2_MASK) << 22; 1064 if (state->pll3 & PORT_PLL_M2_FRAC_ENABLE) 1065 clock.m2 |= state->pll2 & PORT_PLL_M2_FRAC_MASK; 1066 clock.n = (state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT; 1067 clock.p1 = (state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT; 1068 clock.p2 = (state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT; 1069 1070 return chv_calc_dpll_params(100000, &clock); 1071 } 1072 1073 static void bxt_ddi_clock_get(struct intel_encoder *encoder, 1074 struct intel_crtc_state *pipe_config) 1075 { 1076 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1077 enum port port = intel_ddi_get_encoder_port(encoder); 1078 uint32_t dpll = port; 1079 1080 pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll); 1081 1082 ddi_dotclock_get(pipe_config); 1083 } 1084 1085 void intel_ddi_clock_get(struct intel_encoder *encoder, 1086 struct intel_crtc_state *pipe_config) 1087 { 1088 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1089 1090 if (INTEL_GEN(dev_priv) <= 8) 1091 hsw_ddi_clock_get(encoder, pipe_config); 1092 else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) 1093 skl_ddi_clock_get(encoder, pipe_config); 1094 else if (IS_BROXTON(dev_priv)) 1095 bxt_ddi_clock_get(encoder, pipe_config); 1096 } 1097 1098 static bool 1099 hsw_ddi_pll_select(struct intel_crtc *intel_crtc, 1100 struct intel_crtc_state *crtc_state, 1101 struct intel_encoder *intel_encoder) 1102 { 1103 struct intel_shared_dpll *pll; 1104 1105 pll = intel_get_shared_dpll(intel_crtc, crtc_state, 1106 intel_encoder); 1107 if (!pll) 1108 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", 1109 pipe_name(intel_crtc->pipe)); 1110 1111 return pll; 1112 } 1113 1114 static bool 1115 skl_ddi_pll_select(struct intel_crtc *intel_crtc, 1116 struct intel_crtc_state *crtc_state, 1117 struct intel_encoder *intel_encoder) 1118 { 1119 struct intel_shared_dpll *pll; 1120 1121 pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); 1122 if (pll == NULL) { 1123 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", 1124 pipe_name(intel_crtc->pipe)); 1125 return false; 1126 } 1127 1128 return true; 1129 } 1130 1131 static bool 1132 bxt_ddi_pll_select(struct intel_crtc *intel_crtc, 1133 struct intel_crtc_state *crtc_state, 1134 struct intel_encoder *intel_encoder) 1135 { 1136 return !!intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); 1137 } 1138 1139 /* 1140 * Tries to find a *shared* PLL for the CRTC and store it in 1141 * intel_crtc->ddi_pll_sel. 1142 * 1143 * For private DPLLs, compute_config() should do the selection for us. This 1144 * function should be folded into compute_config() eventually. 1145 */ 1146 bool intel_ddi_pll_select(struct intel_crtc *intel_crtc, 1147 struct intel_crtc_state *crtc_state) 1148 { 1149 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); 1150 struct intel_encoder *intel_encoder = 1151 intel_ddi_get_crtc_new_encoder(crtc_state); 1152 1153 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) 1154 return skl_ddi_pll_select(intel_crtc, crtc_state, 1155 intel_encoder); 1156 else if (IS_BROXTON(dev_priv)) 1157 return bxt_ddi_pll_select(intel_crtc, crtc_state, 1158 intel_encoder); 1159 else 1160 return hsw_ddi_pll_select(intel_crtc, crtc_state, 1161 intel_encoder); 1162 } 1163 1164 void intel_ddi_set_pipe_settings(struct drm_crtc *crtc) 1165 { 1166 struct drm_i915_private *dev_priv = to_i915(crtc->dev); 1167 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1168 struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); 1169 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; 1170 int type = intel_encoder->type; 1171 uint32_t temp; 1172 1173 if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) { 1174 WARN_ON(transcoder_is_dsi(cpu_transcoder)); 1175 1176 temp = TRANS_MSA_SYNC_CLK; 1177 switch (intel_crtc->config->pipe_bpp) { 1178 case 18: 1179 temp |= TRANS_MSA_6_BPC; 1180 break; 1181 case 24: 1182 temp |= TRANS_MSA_8_BPC; 1183 break; 1184 case 30: 1185 temp |= TRANS_MSA_10_BPC; 1186 break; 1187 case 36: 1188 temp |= TRANS_MSA_12_BPC; 1189 break; 1190 default: 1191 BUG(); 1192 } 1193 I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp); 1194 } 1195 } 1196 1197 void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state) 1198 { 1199 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1200 struct drm_device *dev = crtc->dev; 1201 struct drm_i915_private *dev_priv = to_i915(dev); 1202 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; 1203 uint32_t temp; 1204 temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); 1205 if (state == true) 1206 temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC; 1207 else 1208 temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC; 1209 I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); 1210 } 1211 1212 void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) 1213 { 1214 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1215 struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); 1216 struct drm_device *dev = crtc->dev; 1217 struct drm_i915_private *dev_priv = to_i915(dev); 1218 enum i915_pipe pipe = intel_crtc->pipe; 1219 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; 1220 enum port port = intel_ddi_get_encoder_port(intel_encoder); 1221 int type = intel_encoder->type; 1222 uint32_t temp; 1223 1224 /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ 1225 temp = TRANS_DDI_FUNC_ENABLE; 1226 temp |= TRANS_DDI_SELECT_PORT(port); 1227 1228 switch (intel_crtc->config->pipe_bpp) { 1229 case 18: 1230 temp |= TRANS_DDI_BPC_6; 1231 break; 1232 case 24: 1233 temp |= TRANS_DDI_BPC_8; 1234 break; 1235 case 30: 1236 temp |= TRANS_DDI_BPC_10; 1237 break; 1238 case 36: 1239 temp |= TRANS_DDI_BPC_12; 1240 break; 1241 default: 1242 BUG(); 1243 } 1244 1245 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) 1246 temp |= TRANS_DDI_PVSYNC; 1247 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) 1248 temp |= TRANS_DDI_PHSYNC; 1249 1250 if (cpu_transcoder == TRANSCODER_EDP) { 1251 switch (pipe) { 1252 case PIPE_A: 1253 /* On Haswell, can only use the always-on power well for 1254 * eDP when not using the panel fitter, and when not 1255 * using motion blur mitigation (which we don't 1256 * support). */ 1257 if (IS_HASWELL(dev_priv) && 1258 (intel_crtc->config->pch_pfit.enabled || 1259 intel_crtc->config->pch_pfit.force_thru)) 1260 temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; 1261 else 1262 temp |= TRANS_DDI_EDP_INPUT_A_ON; 1263 break; 1264 case PIPE_B: 1265 temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; 1266 break; 1267 case PIPE_C: 1268 temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; 1269 break; 1270 default: 1271 BUG(); 1272 break; 1273 } 1274 } 1275 1276 if (type == INTEL_OUTPUT_HDMI) { 1277 if (intel_crtc->config->has_hdmi_sink) 1278 temp |= TRANS_DDI_MODE_SELECT_HDMI; 1279 else 1280 temp |= TRANS_DDI_MODE_SELECT_DVI; 1281 } else if (type == INTEL_OUTPUT_ANALOG) { 1282 temp |= TRANS_DDI_MODE_SELECT_FDI; 1283 temp |= (intel_crtc->config->fdi_lanes - 1) << 1; 1284 } else if (type == INTEL_OUTPUT_DP || 1285 type == INTEL_OUTPUT_EDP) { 1286 temp |= TRANS_DDI_MODE_SELECT_DP_SST; 1287 temp |= DDI_PORT_WIDTH(intel_crtc->config->lane_count); 1288 } else if (type == INTEL_OUTPUT_DP_MST) { 1289 temp |= TRANS_DDI_MODE_SELECT_DP_MST; 1290 temp |= DDI_PORT_WIDTH(intel_crtc->config->lane_count); 1291 } else { 1292 WARN(1, "Invalid encoder type %d for pipe %c\n", 1293 intel_encoder->type, pipe_name(pipe)); 1294 } 1295 1296 I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); 1297 } 1298 1299 void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, 1300 enum transcoder cpu_transcoder) 1301 { 1302 i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); 1303 uint32_t val = I915_READ(reg); 1304 1305 val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC); 1306 val |= TRANS_DDI_PORT_NONE; 1307 I915_WRITE(reg, val); 1308 } 1309 1310 bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) 1311 { 1312 struct drm_device *dev = intel_connector->base.dev; 1313 struct drm_i915_private *dev_priv = to_i915(dev); 1314 struct intel_encoder *intel_encoder = intel_connector->encoder; 1315 int type = intel_connector->base.connector_type; 1316 enum port port = intel_ddi_get_encoder_port(intel_encoder); 1317 enum i915_pipe pipe = 0; 1318 enum transcoder cpu_transcoder; 1319 enum intel_display_power_domain power_domain; 1320 uint32_t tmp; 1321 bool ret; 1322 1323 power_domain = intel_display_port_power_domain(intel_encoder); 1324 if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) 1325 return false; 1326 1327 if (!intel_encoder->get_hw_state(intel_encoder, &pipe)) { 1328 ret = false; 1329 goto out; 1330 } 1331 1332 if (port == PORT_A) 1333 cpu_transcoder = TRANSCODER_EDP; 1334 else 1335 cpu_transcoder = (enum transcoder) pipe; 1336 1337 tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); 1338 1339 switch (tmp & TRANS_DDI_MODE_SELECT_MASK) { 1340 case TRANS_DDI_MODE_SELECT_HDMI: 1341 case TRANS_DDI_MODE_SELECT_DVI: 1342 ret = type == DRM_MODE_CONNECTOR_HDMIA; 1343 break; 1344 1345 case TRANS_DDI_MODE_SELECT_DP_SST: 1346 ret = type == DRM_MODE_CONNECTOR_eDP || 1347 type == DRM_MODE_CONNECTOR_DisplayPort; 1348 break; 1349 1350 case TRANS_DDI_MODE_SELECT_DP_MST: 1351 /* if the transcoder is in MST state then 1352 * connector isn't connected */ 1353 ret = false; 1354 break; 1355 1356 case TRANS_DDI_MODE_SELECT_FDI: 1357 ret = type == DRM_MODE_CONNECTOR_VGA; 1358 break; 1359 1360 default: 1361 ret = false; 1362 break; 1363 } 1364 1365 out: 1366 intel_display_power_put(dev_priv, power_domain); 1367 1368 return ret; 1369 } 1370 1371 bool intel_ddi_get_hw_state(struct intel_encoder *encoder, 1372 enum i915_pipe *pipe) 1373 { 1374 struct drm_device *dev = encoder->base.dev; 1375 struct drm_i915_private *dev_priv = to_i915(dev); 1376 enum port port = intel_ddi_get_encoder_port(encoder); 1377 enum intel_display_power_domain power_domain; 1378 u32 tmp; 1379 int i; 1380 bool ret; 1381 1382 power_domain = intel_display_port_power_domain(encoder); 1383 if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) 1384 return false; 1385 1386 ret = false; 1387 1388 tmp = I915_READ(DDI_BUF_CTL(port)); 1389 1390 if (!(tmp & DDI_BUF_CTL_ENABLE)) 1391 goto out; 1392 1393 if (port == PORT_A) { 1394 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); 1395 1396 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { 1397 case TRANS_DDI_EDP_INPUT_A_ON: 1398 case TRANS_DDI_EDP_INPUT_A_ONOFF: 1399 *pipe = PIPE_A; 1400 break; 1401 case TRANS_DDI_EDP_INPUT_B_ONOFF: 1402 *pipe = PIPE_B; 1403 break; 1404 case TRANS_DDI_EDP_INPUT_C_ONOFF: 1405 *pipe = PIPE_C; 1406 break; 1407 } 1408 1409 ret = true; 1410 1411 goto out; 1412 } 1413 1414 for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) { 1415 tmp = I915_READ(TRANS_DDI_FUNC_CTL(i)); 1416 1417 if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(port)) { 1418 if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == 1419 TRANS_DDI_MODE_SELECT_DP_MST) 1420 goto out; 1421 1422 *pipe = i; 1423 ret = true; 1424 1425 goto out; 1426 } 1427 } 1428 1429 DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port)); 1430 1431 out: 1432 if (ret && IS_BROXTON(dev_priv)) { 1433 tmp = I915_READ(BXT_PHY_CTL(port)); 1434 if ((tmp & (BXT_PHY_LANE_POWERDOWN_ACK | 1435 BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED) 1436 DRM_ERROR("Port %c enabled but PHY powered down? " 1437 "(PHY_CTL %08x)\n", port_name(port), tmp); 1438 } 1439 1440 intel_display_power_put(dev_priv, power_domain); 1441 1442 return ret; 1443 } 1444 1445 void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc) 1446 { 1447 struct drm_crtc *crtc = &intel_crtc->base; 1448 struct drm_device *dev = crtc->dev; 1449 struct drm_i915_private *dev_priv = to_i915(dev); 1450 struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); 1451 enum port port = intel_ddi_get_encoder_port(intel_encoder); 1452 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; 1453 1454 if (cpu_transcoder != TRANSCODER_EDP) 1455 I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), 1456 TRANS_CLK_SEL_PORT(port)); 1457 } 1458 1459 void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc) 1460 { 1461 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); 1462 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; 1463 1464 if (cpu_transcoder != TRANSCODER_EDP) 1465 I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), 1466 TRANS_CLK_SEL_DISABLED); 1467 } 1468 1469 static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, 1470 enum port port, uint8_t iboost) 1471 { 1472 u32 tmp; 1473 1474 tmp = I915_READ(DISPIO_CR_TX_BMU_CR0); 1475 tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); 1476 if (iboost) 1477 tmp |= iboost << BALANCE_LEG_SHIFT(port); 1478 else 1479 tmp |= BALANCE_LEG_DISABLE(port); 1480 I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp); 1481 } 1482 1483 static void skl_ddi_set_iboost(struct intel_encoder *encoder, u32 level) 1484 { 1485 struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); 1486 struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); 1487 enum port port = intel_dig_port->port; 1488 int type = encoder->type; 1489 const struct ddi_buf_trans *ddi_translations; 1490 uint8_t iboost; 1491 uint8_t dp_iboost, hdmi_iboost; 1492 int n_entries; 1493 1494 /* VBT may override standard boost values */ 1495 dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; 1496 hdmi_iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level; 1497 1498 if (type == INTEL_OUTPUT_DP) { 1499 if (dp_iboost) { 1500 iboost = dp_iboost; 1501 } else { 1502 if (IS_KABYLAKE(dev_priv)) 1503 ddi_translations = kbl_get_buf_trans_dp(dev_priv, 1504 &n_entries); 1505 else 1506 ddi_translations = skl_get_buf_trans_dp(dev_priv, 1507 &n_entries); 1508 iboost = ddi_translations[level].i_boost; 1509 } 1510 } else if (type == INTEL_OUTPUT_EDP) { 1511 if (dp_iboost) { 1512 iboost = dp_iboost; 1513 } else { 1514 ddi_translations = skl_get_buf_trans_edp(dev_priv, &n_entries); 1515 1516 if (WARN_ON(port != PORT_A && 1517 port != PORT_E && n_entries > 9)) 1518 n_entries = 9; 1519 1520 iboost = ddi_translations[level].i_boost; 1521 } 1522 } else if (type == INTEL_OUTPUT_HDMI) { 1523 if (hdmi_iboost) { 1524 iboost = hdmi_iboost; 1525 } else { 1526 ddi_translations = skl_get_buf_trans_hdmi(dev_priv, &n_entries); 1527 iboost = ddi_translations[level].i_boost; 1528 } 1529 } else { 1530 return; 1531 } 1532 1533 /* Make sure that the requested I_boost is valid */ 1534 if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { 1535 DRM_ERROR("Invalid I_boost value %u\n", iboost); 1536 return; 1537 } 1538 1539 _skl_ddi_set_iboost(dev_priv, port, iboost); 1540 1541 if (port == PORT_A && intel_dig_port->max_lanes == 4) 1542 _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); 1543 } 1544 1545 static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, 1546 u32 level, enum port port, int type) 1547 { 1548 const struct bxt_ddi_buf_trans *ddi_translations; 1549 u32 n_entries, i; 1550 1551 if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) { 1552 n_entries = ARRAY_SIZE(bxt_ddi_translations_edp); 1553 ddi_translations = bxt_ddi_translations_edp; 1554 } else if (type == INTEL_OUTPUT_DP 1555 || type == INTEL_OUTPUT_EDP) { 1556 n_entries = ARRAY_SIZE(bxt_ddi_translations_dp); 1557 ddi_translations = bxt_ddi_translations_dp; 1558 } else if (type == INTEL_OUTPUT_HDMI) { 1559 n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi); 1560 ddi_translations = bxt_ddi_translations_hdmi; 1561 } else { 1562 DRM_DEBUG_KMS("Vswing programming not done for encoder %d\n", 1563 type); 1564 return; 1565 } 1566 1567 /* Check if default value has to be used */ 1568 if (level >= n_entries || 1569 (type == INTEL_OUTPUT_HDMI && level == HDMI_LEVEL_SHIFT_UNKNOWN)) { 1570 for (i = 0; i < n_entries; i++) { 1571 if (ddi_translations[i].default_index) { 1572 level = i; 1573 break; 1574 } 1575 } 1576 } 1577 1578 bxt_ddi_phy_set_signal_level(dev_priv, port, 1579 ddi_translations[level].margin, 1580 ddi_translations[level].scale, 1581 ddi_translations[level].enable, 1582 ddi_translations[level].deemphasis); 1583 } 1584 1585 static uint32_t translate_signal_level(int signal_levels) 1586 { 1587 uint32_t level; 1588 1589 switch (signal_levels) { 1590 default: 1591 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level: 0x%x\n", 1592 signal_levels); 1593 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: 1594 level = 0; 1595 break; 1596 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: 1597 level = 1; 1598 break; 1599 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: 1600 level = 2; 1601 break; 1602 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3: 1603 level = 3; 1604 break; 1605 1606 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: 1607 level = 4; 1608 break; 1609 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: 1610 level = 5; 1611 break; 1612 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2: 1613 level = 6; 1614 break; 1615 1616 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: 1617 level = 7; 1618 break; 1619 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: 1620 level = 8; 1621 break; 1622 1623 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0: 1624 level = 9; 1625 break; 1626 } 1627 1628 return level; 1629 } 1630 1631 uint32_t ddi_signal_levels(struct intel_dp *intel_dp) 1632 { 1633 struct intel_digital_port *dport = dp_to_dig_port(intel_dp); 1634 struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); 1635 struct intel_encoder *encoder = &dport->base; 1636 uint8_t train_set = intel_dp->train_set[0]; 1637 int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | 1638 DP_TRAIN_PRE_EMPHASIS_MASK); 1639 enum port port = dport->port; 1640 uint32_t level; 1641 1642 level = translate_signal_level(signal_levels); 1643 1644 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) 1645 skl_ddi_set_iboost(encoder, level); 1646 else if (IS_BROXTON(dev_priv)) 1647 bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); 1648 1649 return DDI_BUF_TRANS_SELECT(level); 1650 } 1651 1652 void intel_ddi_clk_select(struct intel_encoder *encoder, 1653 struct intel_shared_dpll *pll) 1654 { 1655 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1656 enum port port = intel_ddi_get_encoder_port(encoder); 1657 1658 if (WARN_ON(!pll)) 1659 return; 1660 1661 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { 1662 uint32_t val; 1663 1664 /* DDI -> PLL mapping */ 1665 val = I915_READ(DPLL_CTRL2); 1666 1667 val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) | 1668 DPLL_CTRL2_DDI_CLK_SEL_MASK(port)); 1669 val |= (DPLL_CTRL2_DDI_CLK_SEL(pll->id, port) | 1670 DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); 1671 1672 I915_WRITE(DPLL_CTRL2, val); 1673 1674 } else if (INTEL_INFO(dev_priv)->gen < 9) { 1675 I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); 1676 } 1677 } 1678 1679 static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, 1680 int link_rate, uint32_t lane_count, 1681 struct intel_shared_dpll *pll, 1682 bool link_mst) 1683 { 1684 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); 1685 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1686 enum port port = intel_ddi_get_encoder_port(encoder); 1687 1688 intel_dp_set_link_params(intel_dp, link_rate, lane_count, 1689 link_mst); 1690 if (encoder->type == INTEL_OUTPUT_EDP) 1691 intel_edp_panel_on(intel_dp); 1692 1693 intel_ddi_clk_select(encoder, pll); 1694 intel_prepare_dp_ddi_buffers(encoder); 1695 intel_ddi_init_dp_buf_reg(encoder); 1696 intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); 1697 intel_dp_start_link_train(intel_dp); 1698 if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) 1699 intel_dp_stop_link_train(intel_dp); 1700 } 1701 1702 static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder, 1703 bool has_hdmi_sink, 1704 struct drm_display_mode *adjusted_mode, 1705 struct intel_shared_dpll *pll) 1706 { 1707 struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); 1708 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1709 struct drm_encoder *drm_encoder = &encoder->base; 1710 enum port port = intel_ddi_get_encoder_port(encoder); 1711 int level = intel_ddi_hdmi_level(dev_priv, port); 1712 1713 intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); 1714 intel_ddi_clk_select(encoder, pll); 1715 intel_prepare_hdmi_ddi_buffers(encoder); 1716 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) 1717 skl_ddi_set_iboost(encoder, level); 1718 else if (IS_BROXTON(dev_priv)) 1719 bxt_ddi_vswing_sequence(dev_priv, level, port, 1720 INTEL_OUTPUT_HDMI); 1721 1722 intel_hdmi->set_infoframes(drm_encoder, 1723 has_hdmi_sink, 1724 adjusted_mode); 1725 } 1726 1727 static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder, 1728 struct intel_crtc_state *pipe_config, 1729 struct drm_connector_state *conn_state) 1730 { 1731 struct drm_encoder *encoder = &intel_encoder->base; 1732 struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); 1733 int type = intel_encoder->type; 1734 1735 if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { 1736 intel_ddi_pre_enable_dp(intel_encoder, 1737 crtc->config->port_clock, 1738 crtc->config->lane_count, 1739 crtc->config->shared_dpll, 1740 intel_crtc_has_type(crtc->config, 1741 INTEL_OUTPUT_DP_MST)); 1742 } 1743 if (type == INTEL_OUTPUT_HDMI) { 1744 intel_ddi_pre_enable_hdmi(intel_encoder, 1745 crtc->config->has_hdmi_sink, 1746 &crtc->config->base.adjusted_mode, 1747 crtc->config->shared_dpll); 1748 } 1749 } 1750 1751 static void intel_ddi_post_disable(struct intel_encoder *intel_encoder, 1752 struct intel_crtc_state *old_crtc_state, 1753 struct drm_connector_state *old_conn_state) 1754 { 1755 struct drm_encoder *encoder = &intel_encoder->base; 1756 struct drm_i915_private *dev_priv = to_i915(encoder->dev); 1757 enum port port = intel_ddi_get_encoder_port(intel_encoder); 1758 int type = intel_encoder->type; 1759 uint32_t val; 1760 bool wait = false; 1761 1762 /* old_crtc_state and old_conn_state are NULL when called from DP_MST */ 1763 1764 val = I915_READ(DDI_BUF_CTL(port)); 1765 if (val & DDI_BUF_CTL_ENABLE) { 1766 val &= ~DDI_BUF_CTL_ENABLE; 1767 I915_WRITE(DDI_BUF_CTL(port), val); 1768 wait = true; 1769 } 1770 1771 val = I915_READ(DP_TP_CTL(port)); 1772 val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); 1773 val |= DP_TP_CTL_LINK_TRAIN_PAT1; 1774 I915_WRITE(DP_TP_CTL(port), val); 1775 1776 if (wait) 1777 intel_wait_ddi_buf_idle(dev_priv, port); 1778 1779 if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { 1780 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1781 intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); 1782 intel_edp_panel_vdd_on(intel_dp); 1783 intel_edp_panel_off(intel_dp); 1784 } 1785 1786 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) 1787 I915_WRITE(DPLL_CTRL2, (I915_READ(DPLL_CTRL2) | 1788 DPLL_CTRL2_DDI_CLK_OFF(port))); 1789 else if (INTEL_GEN(dev_priv) < 9) 1790 I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); 1791 1792 if (type == INTEL_OUTPUT_HDMI) { 1793 struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); 1794 1795 intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); 1796 } 1797 } 1798 1799 void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder, 1800 struct intel_crtc_state *old_crtc_state, 1801 struct drm_connector_state *old_conn_state) 1802 { 1803 struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); 1804 uint32_t val; 1805 1806 /* 1807 * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) 1808 * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, 1809 * step 13 is the correct place for it. Step 18 is where it was 1810 * originally before the BUN. 1811 */ 1812 val = I915_READ(FDI_RX_CTL(PIPE_A)); 1813 val &= ~FDI_RX_ENABLE; 1814 I915_WRITE(FDI_RX_CTL(PIPE_A), val); 1815 1816 intel_ddi_post_disable(intel_encoder, old_crtc_state, old_conn_state); 1817 1818 val = I915_READ(FDI_RX_MISC(PIPE_A)); 1819 val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); 1820 val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); 1821 I915_WRITE(FDI_RX_MISC(PIPE_A), val); 1822 1823 val = I915_READ(FDI_RX_CTL(PIPE_A)); 1824 val &= ~FDI_PCDCLK; 1825 I915_WRITE(FDI_RX_CTL(PIPE_A), val); 1826 1827 val = I915_READ(FDI_RX_CTL(PIPE_A)); 1828 val &= ~FDI_RX_PLL_ENABLE; 1829 I915_WRITE(FDI_RX_CTL(PIPE_A), val); 1830 } 1831 1832 static void intel_enable_ddi(struct intel_encoder *intel_encoder, 1833 struct intel_crtc_state *pipe_config, 1834 struct drm_connector_state *conn_state) 1835 { 1836 struct drm_encoder *encoder = &intel_encoder->base; 1837 struct drm_crtc *crtc = encoder->crtc; 1838 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1839 struct drm_i915_private *dev_priv = to_i915(encoder->dev); 1840 enum port port = intel_ddi_get_encoder_port(intel_encoder); 1841 int type = intel_encoder->type; 1842 1843 if (type == INTEL_OUTPUT_HDMI) { 1844 struct intel_digital_port *intel_dig_port = 1845 enc_to_dig_port(encoder); 1846 1847 /* In HDMI/DVI mode, the port width, and swing/emphasis values 1848 * are ignored so nothing special needs to be done besides 1849 * enabling the port. 1850 */ 1851 I915_WRITE(DDI_BUF_CTL(port), 1852 intel_dig_port->saved_port_bits | 1853 DDI_BUF_CTL_ENABLE); 1854 } else if (type == INTEL_OUTPUT_EDP) { 1855 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1856 1857 if (port == PORT_A && INTEL_GEN(dev_priv) < 9) 1858 intel_dp_stop_link_train(intel_dp); 1859 1860 intel_edp_backlight_on(intel_dp); 1861 intel_psr_enable(intel_dp); 1862 intel_edp_drrs_enable(intel_dp, pipe_config); 1863 } 1864 1865 if (intel_crtc->config->has_audio) { 1866 intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); 1867 intel_audio_codec_enable(intel_encoder, pipe_config, conn_state); 1868 } 1869 } 1870 1871 static void intel_disable_ddi(struct intel_encoder *intel_encoder, 1872 struct intel_crtc_state *old_crtc_state, 1873 struct drm_connector_state *old_conn_state) 1874 { 1875 struct drm_encoder *encoder = &intel_encoder->base; 1876 struct drm_crtc *crtc = encoder->crtc; 1877 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1878 int type = intel_encoder->type; 1879 struct drm_device *dev = encoder->dev; 1880 struct drm_i915_private *dev_priv = to_i915(dev); 1881 1882 if (intel_crtc->config->has_audio) { 1883 intel_audio_codec_disable(intel_encoder); 1884 intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); 1885 } 1886 1887 if (type == INTEL_OUTPUT_EDP) { 1888 struct intel_dp *intel_dp = enc_to_intel_dp(encoder); 1889 1890 intel_edp_drrs_disable(intel_dp, old_crtc_state); 1891 intel_psr_disable(intel_dp); 1892 intel_edp_backlight_off(intel_dp); 1893 } 1894 } 1895 1896 static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder, 1897 struct intel_crtc_state *pipe_config, 1898 struct drm_connector_state *conn_state) 1899 { 1900 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 1901 uint8_t mask = intel_crtc->config->lane_lat_optim_mask; 1902 1903 bxt_ddi_phy_set_lane_optim_mask(encoder, mask); 1904 } 1905 1906 void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) 1907 { 1908 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); 1909 struct drm_i915_private *dev_priv = 1910 to_i915(intel_dig_port->base.base.dev); 1911 enum port port = intel_dig_port->port; 1912 uint32_t val; 1913 bool wait = false; 1914 1915 if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) { 1916 val = I915_READ(DDI_BUF_CTL(port)); 1917 if (val & DDI_BUF_CTL_ENABLE) { 1918 val &= ~DDI_BUF_CTL_ENABLE; 1919 I915_WRITE(DDI_BUF_CTL(port), val); 1920 wait = true; 1921 } 1922 1923 val = I915_READ(DP_TP_CTL(port)); 1924 val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); 1925 val |= DP_TP_CTL_LINK_TRAIN_PAT1; 1926 I915_WRITE(DP_TP_CTL(port), val); 1927 POSTING_READ(DP_TP_CTL(port)); 1928 1929 if (wait) 1930 intel_wait_ddi_buf_idle(dev_priv, port); 1931 } 1932 1933 val = DP_TP_CTL_ENABLE | 1934 DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE; 1935 if (intel_dp->link_mst) 1936 val |= DP_TP_CTL_MODE_MST; 1937 else { 1938 val |= DP_TP_CTL_MODE_SST; 1939 if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) 1940 val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; 1941 } 1942 I915_WRITE(DP_TP_CTL(port), val); 1943 POSTING_READ(DP_TP_CTL(port)); 1944 1945 intel_dp->DP |= DDI_BUF_CTL_ENABLE; 1946 I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP); 1947 POSTING_READ(DDI_BUF_CTL(port)); 1948 1949 udelay(600); 1950 } 1951 1952 void intel_ddi_get_config(struct intel_encoder *encoder, 1953 struct intel_crtc_state *pipe_config) 1954 { 1955 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 1956 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); 1957 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; 1958 struct intel_hdmi *intel_hdmi; 1959 u32 temp, flags = 0; 1960 1961 /* XXX: DSI transcoder paranoia */ 1962 if (WARN_ON(transcoder_is_dsi(cpu_transcoder))) 1963 return; 1964 1965 temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); 1966 if (temp & TRANS_DDI_PHSYNC) 1967 flags |= DRM_MODE_FLAG_PHSYNC; 1968 else 1969 flags |= DRM_MODE_FLAG_NHSYNC; 1970 if (temp & TRANS_DDI_PVSYNC) 1971 flags |= DRM_MODE_FLAG_PVSYNC; 1972 else 1973 flags |= DRM_MODE_FLAG_NVSYNC; 1974 1975 pipe_config->base.adjusted_mode.flags |= flags; 1976 1977 switch (temp & TRANS_DDI_BPC_MASK) { 1978 case TRANS_DDI_BPC_6: 1979 pipe_config->pipe_bpp = 18; 1980 break; 1981 case TRANS_DDI_BPC_8: 1982 pipe_config->pipe_bpp = 24; 1983 break; 1984 case TRANS_DDI_BPC_10: 1985 pipe_config->pipe_bpp = 30; 1986 break; 1987 case TRANS_DDI_BPC_12: 1988 pipe_config->pipe_bpp = 36; 1989 break; 1990 default: 1991 break; 1992 } 1993 1994 switch (temp & TRANS_DDI_MODE_SELECT_MASK) { 1995 case TRANS_DDI_MODE_SELECT_HDMI: 1996 pipe_config->has_hdmi_sink = true; 1997 intel_hdmi = enc_to_intel_hdmi(&encoder->base); 1998 1999 if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config)) 2000 pipe_config->has_infoframe = true; 2001 /* fall through */ 2002 case TRANS_DDI_MODE_SELECT_DVI: 2003 pipe_config->lane_count = 4; 2004 break; 2005 case TRANS_DDI_MODE_SELECT_FDI: 2006 break; 2007 case TRANS_DDI_MODE_SELECT_DP_SST: 2008 case TRANS_DDI_MODE_SELECT_DP_MST: 2009 pipe_config->lane_count = 2010 ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; 2011 intel_dp_get_m_n(intel_crtc, pipe_config); 2012 break; 2013 default: 2014 break; 2015 } 2016 2017 if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { 2018 temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); 2019 if (temp & AUDIO_OUTPUT_ENABLE(intel_crtc->pipe)) 2020 pipe_config->has_audio = true; 2021 } 2022 2023 if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && 2024 pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { 2025 /* 2026 * This is a big fat ugly hack. 2027 * 2028 * Some machines in UEFI boot mode provide us a VBT that has 18 2029 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons 2030 * unknown we fail to light up. Yet the same BIOS boots up with 2031 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as 2032 * max, not what it tells us to use. 2033 * 2034 * Note: This will still be broken if the eDP panel is not lit 2035 * up by the BIOS, and thus we can't get the mode at module 2036 * load. 2037 */ 2038 DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", 2039 pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); 2040 dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; 2041 } 2042 2043 intel_ddi_clock_get(encoder, pipe_config); 2044 2045 if (IS_BROXTON(dev_priv)) 2046 pipe_config->lane_lat_optim_mask = 2047 bxt_ddi_phy_get_lane_lat_optim_mask(encoder); 2048 } 2049 2050 static bool intel_ddi_compute_config(struct intel_encoder *encoder, 2051 struct intel_crtc_state *pipe_config, 2052 struct drm_connector_state *conn_state) 2053 { 2054 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 2055 int type = encoder->type; 2056 int port = intel_ddi_get_encoder_port(encoder); 2057 int ret; 2058 2059 WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n"); 2060 2061 if (port == PORT_A) 2062 pipe_config->cpu_transcoder = TRANSCODER_EDP; 2063 2064 if (type == INTEL_OUTPUT_HDMI) 2065 ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state); 2066 else 2067 ret = intel_dp_compute_config(encoder, pipe_config, conn_state); 2068 2069 if (IS_BROXTON(dev_priv) && ret) 2070 pipe_config->lane_lat_optim_mask = 2071 bxt_ddi_phy_calc_lane_lat_optim_mask(encoder, 2072 pipe_config->lane_count); 2073 2074 return ret; 2075 2076 } 2077 2078 static const struct drm_encoder_funcs intel_ddi_funcs = { 2079 .reset = intel_dp_encoder_reset, 2080 .destroy = intel_dp_encoder_destroy, 2081 }; 2082 2083 static struct intel_connector * 2084 intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port) 2085 { 2086 struct intel_connector *connector; 2087 enum port port = intel_dig_port->port; 2088 2089 connector = intel_connector_alloc(); 2090 if (!connector) 2091 return NULL; 2092 2093 intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); 2094 if (!intel_dp_init_connector(intel_dig_port, connector)) { 2095 kfree(connector); 2096 return NULL; 2097 } 2098 2099 return connector; 2100 } 2101 2102 static struct intel_connector * 2103 intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) 2104 { 2105 struct intel_connector *connector; 2106 enum port port = intel_dig_port->port; 2107 2108 connector = intel_connector_alloc(); 2109 if (!connector) 2110 return NULL; 2111 2112 intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); 2113 intel_hdmi_init_connector(intel_dig_port, connector); 2114 2115 return connector; 2116 } 2117 2118 struct intel_shared_dpll * 2119 intel_ddi_get_link_dpll(struct intel_dp *intel_dp, int clock) 2120 { 2121 struct intel_connector *connector = intel_dp->attached_connector; 2122 struct intel_encoder *encoder = connector->encoder; 2123 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); 2124 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); 2125 struct intel_shared_dpll *pll = NULL; 2126 struct intel_shared_dpll_config tmp_pll_config; 2127 enum intel_dpll_id dpll_id; 2128 2129 if (IS_BROXTON(dev_priv)) { 2130 dpll_id = (enum intel_dpll_id)dig_port->port; 2131 /* 2132 * Select the required PLL. This works for platforms where 2133 * there is no shared DPLL. 2134 */ 2135 pll = &dev_priv->shared_dplls[dpll_id]; 2136 if (WARN_ON(pll->active_mask)) { 2137 2138 DRM_ERROR("Shared DPLL in use. active_mask:%x\n", 2139 pll->active_mask); 2140 return NULL; 2141 } 2142 tmp_pll_config = pll->config; 2143 if (!bxt_ddi_dp_set_dpll_hw_state(clock, 2144 &pll->config.hw_state)) { 2145 DRM_ERROR("Could not setup DPLL\n"); 2146 pll->config = tmp_pll_config; 2147 return NULL; 2148 } 2149 } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { 2150 pll = skl_find_link_pll(dev_priv, clock); 2151 } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { 2152 pll = hsw_ddi_dp_get_dpll(encoder, clock); 2153 } 2154 return pll; 2155 } 2156 2157 void intel_ddi_init(struct drm_device *dev, enum port port) 2158 { 2159 struct drm_i915_private *dev_priv = to_i915(dev); 2160 struct intel_digital_port *intel_dig_port; 2161 struct intel_encoder *intel_encoder; 2162 struct drm_encoder *encoder; 2163 bool init_hdmi, init_dp, init_lspcon = false; 2164 int max_lanes; 2165 2166 if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) { 2167 switch (port) { 2168 case PORT_A: 2169 max_lanes = 4; 2170 break; 2171 case PORT_E: 2172 max_lanes = 0; 2173 break; 2174 default: 2175 max_lanes = 4; 2176 break; 2177 } 2178 } else { 2179 switch (port) { 2180 case PORT_A: 2181 max_lanes = 2; 2182 break; 2183 case PORT_E: 2184 max_lanes = 2; 2185 break; 2186 default: 2187 max_lanes = 4; 2188 break; 2189 } 2190 } 2191 2192 init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi || 2193 dev_priv->vbt.ddi_port_info[port].supports_hdmi); 2194 init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp; 2195 2196 if (intel_bios_is_lspcon_present(dev_priv, port)) { 2197 /* 2198 * Lspcon device needs to be driven with DP connector 2199 * with special detection sequence. So make sure DP 2200 * is initialized before lspcon. 2201 */ 2202 init_dp = true; 2203 init_lspcon = true; 2204 init_hdmi = false; 2205 DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port)); 2206 } 2207 2208 if (!init_dp && !init_hdmi) { 2209 DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", 2210 port_name(port)); 2211 return; 2212 } 2213 2214 intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); 2215 if (!intel_dig_port) 2216 return; 2217 2218 intel_encoder = &intel_dig_port->base; 2219 encoder = &intel_encoder->base; 2220 2221 drm_encoder_init(dev, encoder, &intel_ddi_funcs, 2222 DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port)); 2223 2224 intel_encoder->compute_config = intel_ddi_compute_config; 2225 intel_encoder->enable = intel_enable_ddi; 2226 if (IS_BROXTON(dev_priv)) 2227 intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable; 2228 intel_encoder->pre_enable = intel_ddi_pre_enable; 2229 intel_encoder->disable = intel_disable_ddi; 2230 intel_encoder->post_disable = intel_ddi_post_disable; 2231 intel_encoder->get_hw_state = intel_ddi_get_hw_state; 2232 intel_encoder->get_config = intel_ddi_get_config; 2233 intel_encoder->suspend = intel_dp_encoder_suspend; 2234 2235 intel_dig_port->port = port; 2236 intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & 2237 (DDI_BUF_PORT_REVERSAL | 2238 DDI_A_4_LANES); 2239 2240 /* 2241 * Bspec says that DDI_A_4_LANES is the only supported configuration 2242 * for Broxton. Yet some BIOS fail to set this bit on port A if eDP 2243 * wasn't lit up at boot. Force this bit on in our internal 2244 * configuration so that we use the proper lane count for our 2245 * calculations. 2246 */ 2247 if (IS_BROXTON(dev_priv) && port == PORT_A) { 2248 if (!(intel_dig_port->saved_port_bits & DDI_A_4_LANES)) { 2249 DRM_DEBUG_KMS("BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing\n"); 2250 intel_dig_port->saved_port_bits |= DDI_A_4_LANES; 2251 max_lanes = 4; 2252 } 2253 } 2254 2255 intel_dig_port->max_lanes = max_lanes; 2256 2257 intel_encoder->type = INTEL_OUTPUT_UNKNOWN; 2258 intel_encoder->port = port; 2259 intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); 2260 intel_encoder->cloneable = 0; 2261 2262 if (init_dp) { 2263 if (!intel_ddi_init_dp_connector(intel_dig_port)) 2264 goto err; 2265 2266 intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; 2267 /* 2268 * On BXT A0/A1, sw needs to activate DDIA HPD logic and 2269 * interrupts to check the external panel connection. 2270 */ 2271 if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1) && port == PORT_B) 2272 dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port; 2273 else 2274 dev_priv->hotplug.irq_port[port] = intel_dig_port; 2275 } 2276 2277 /* In theory we don't need the encoder->type check, but leave it just in 2278 * case we have some really bad VBTs... */ 2279 if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { 2280 if (!intel_ddi_init_hdmi_connector(intel_dig_port)) 2281 goto err; 2282 } 2283 2284 if (init_lspcon) { 2285 if (lspcon_init(intel_dig_port)) 2286 /* TODO: handle hdmi info frame part */ 2287 DRM_DEBUG_KMS("LSPCON init success on port %c\n", 2288 port_name(port)); 2289 else 2290 /* 2291 * LSPCON init faied, but DP init was success, so 2292 * lets try to drive as DP++ port. 2293 */ 2294 DRM_ERROR("LSPCON init failed on port %c\n", 2295 port_name(port)); 2296 } 2297 2298 return; 2299 2300 err: 2301 drm_encoder_cleanup(encoder); 2302 kfree(intel_dig_port); 2303 } 2304