1 /*- 2 * Copyright (c) 1996-1999 3 * Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp) 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote 15 * products derived from this software without specific prior written 16 * permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * $FreeBSD: src/sys/dev/kbd/atkbdcreg.h,v 1.4.2.2 2000/03/31 12:51:57 yokota Exp $ 31 * $DragonFly: src/sys/dev/misc/kbd/atkbdcreg.h,v 1.3 2007/01/15 00:11:36 dillon Exp $ 32 * from kbdio.h,v 1.8 1998/09/25 11:55:46 yokota Exp 33 */ 34 35 #ifndef _DEV_KBD_ATKBDCREG_H_ 36 #define _DEV_KBD_ATKBDCREG_H_ 37 38 /* constants */ 39 40 /* I/O ports */ 41 #define KBD_STATUS_PORT 4 /* status port, read */ 42 #define KBD_COMMAND_PORT 4 /* controller command port, write */ 43 #define KBD_DATA_PORT 0 /* data port, read/write 44 * also used as keyboard command 45 * and mouse command port 46 */ 47 48 /* misc */ 49 #define KBD_NUM_MUX_PORTS 4 50 51 /* controller commands (sent to KBD_COMMAND_PORT) */ 52 #define KBDC_SET_COMMAND_BYTE 0x0060 53 #define KBDC_GET_COMMAND_BYTE 0x0020 54 #define KBDC_WRITE_TO_AUX 0x00d4 55 #define KBDC_DISABLE_AUX_PORT 0x00a7 56 #define KBDC_ENABLE_AUX_PORT 0x00a8 57 #define KBDC_TEST_AUX_PORT 0x00a9 58 #define KBDC_DIAGNOSE 0x00aa 59 #define KBDC_TEST_KBD_PORT 0x00ab 60 #define KBDC_DISABLE_KBD_PORT 0x00ad 61 #define KBDC_ENABLE_KBD_PORT 0x00ae 62 #define KBDC_AUX_LOOP 0x00d3 /* mux test w+1, r+1 */ 63 #define KBDC_MUX_PFX 0x0090 64 #define KBDC_MUX_SEND 0x0090 65 66 /* controller command byte (set by KBDC_SET_COMMAND_BYTE) */ 67 #define KBD_TRANSLATION 0x0040 68 #define KBD_RESERVED_BITS 0x0004 69 #define KBD_OVERRIDE_KBD_LOCK 0x0008 70 #define KBD_ENABLE_KBD_PORT 0x0000 71 #define KBD_DISABLE_KBD_PORT 0x0010 72 #define KBD_ENABLE_AUX_PORT 0x0000 73 #define KBD_DISABLE_AUX_PORT 0x0020 74 #define KBD_ENABLE_AUX_INT 0x0002 75 #define KBD_DISABLE_AUX_INT 0x0000 76 #define KBD_ENABLE_KBD_INT 0x0001 77 #define KBD_DISABLE_KBD_INT 0x0000 78 #define KBD_KBD_CONTROL_BITS (KBD_DISABLE_KBD_PORT | KBD_ENABLE_KBD_INT) 79 #define KBD_AUX_CONTROL_BITS (KBD_DISABLE_AUX_PORT | KBD_ENABLE_AUX_INT) 80 81 /* keyboard device commands (sent to KBD_DATA_PORT) */ 82 #define KBDC_RESET_KBD 0x00ff 83 #define KBDC_ENABLE_KBD 0x00f4 84 #define KBDC_DISABLE_KBD 0x00f5 85 #define KBDC_SET_DEFAULTS 0x00f6 86 #define KBDC_SEND_DEV_ID 0x00f2 87 #define KBDC_SET_LEDS 0x00ed 88 #define KBDC_ECHO 0x00ee 89 #define KBDC_SET_SCANCODE_SET 0x00f0 90 #define KBDC_SET_TYPEMATIC 0x00f3 91 92 #define ATKBD_CMD_SETLEDS 0x10ed 93 #define ATKBD_CMD_GSCANSET 0x11f0 94 #define ATKBD_CMD_SSCANSET 0x10f0 95 #define ATKBD_CMD_GETID 0x02f2 96 #define ATKBD_CMD_SETREP 0x10f3 97 #define ATKBD_CMD_ENABLE 0x00f4 98 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ 99 #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ 100 #define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ 101 #define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ 102 #define ATKBD_CMD_RESET_BAT 0x02ff 103 #define ATKBD_CMD_RESEND 0x00fe 104 #define ATKBD_CMD_EX_ENABLE 0x10ea 105 #define ATKBD_CMD_EX_SETLEDS 0x20eb 106 #define ATKBD_CMD_OK_GETID 0x02e8 107 108 /* aux device commands (sent to KBD_DATA_PORT) */ 109 #define PSMC_RESET_DEV 0x00ff 110 #define PSMC_ENABLE_DEV 0x00f4 111 #define PSMC_DISABLE_DEV 0x00f5 112 #define PSMC_SET_DEFAULTS 0x00f6 113 #define PSMC_SEND_DEV_ID 0x00f2 114 #define PSMC_SEND_DEV_STATUS 0x00e9 115 #define PSMC_SEND_DEV_DATA 0x00eb 116 #define PSMC_SET_SCALING11 0x00e6 117 #define PSMC_SET_SCALING21 0x00e7 118 #define PSMC_SET_RESOLUTION 0x00e8 119 #define PSMC_SET_STREAM_MODE 0x00ea 120 #define PSMC_SET_REMOTE_MODE 0x00f0 121 #define PSMC_SET_SAMPLING_RATE 0x00f3 122 123 /* PSMC_SET_RESOLUTION argument */ 124 #define PSMD_RES_LOW 0 /* typically 25ppi */ 125 #define PSMD_RES_MEDIUM_LOW 1 /* typically 50ppi */ 126 #define PSMD_RES_MEDIUM_HIGH 2 /* typically 100ppi (default) */ 127 #define PSMD_RES_HIGH 3 /* typically 200ppi */ 128 #define PSMD_MAX_RESOLUTION PSMD_RES_HIGH 129 130 /* PSMC_SET_SAMPLING_RATE */ 131 #define PSMD_MAX_RATE 255 /* FIXME: not sure if it's possible */ 132 133 /* status bits (KBD_STATUS_PORT) */ 134 #define KBDS_BUFFER_FULL 0x0021 135 #define KBDS_ANY_BUFFER_FULL 0x0001 /* (data from controller pending) */ 136 #define KBDS_KBD_BUFFER_FULL 0x0001 /* mask/match KBDS_BUFFER_FULL */ 137 #define KBDS_AUX_BUFFER_FULL 0x0021 /* mask/match KBDS_BUFFER_FULL */ 138 #define KBDS_INPUT_BUFFER_FULL 0x0002 /* (cmd/data to controller pending) */ 139 140 #define I8042_STR_PARITY 0x80 /* Also MUX data address bit */ 141 #define I8042_STR_TIMEOUT 0x40 /* Also MUX data address bit */ 142 #define I8042_STR_AUXDATA 0x20 143 #define I8042_STR_KEYLOCK 0x10 144 #define I8042_STR_CMDDAT 0x08 145 #define I8042_STR_MUXERR 0x04 146 #define I8042_STR_IBF 0x02 /* write pending (outgoing) */ 147 #define I8042_STR_OBF 0x01 /* read pending (incoming) */ 148 149 #define I8042_STR_MUX_SHIFT 6 150 #define I8042_STR_MUX_MASK 3 151 152 /* return code */ 153 #define KBD_ACK 0x00fa 154 #define KBD_RESEND 0x00fe 155 #define KBD_RESET_DONE 0x00aa 156 #define KBD_RESET_FAIL 0x00fc 157 #define KBD_DIAG_DONE 0x0055 158 #define KBD_DIAG_FAIL 0x00fd 159 #define KBD_ECHO 0x00ee 160 161 #define PSM_ACK 0x00fa 162 #define PSM_RESEND 0x00fe 163 #define PSM_RESET_DONE 0x00aa 164 #define PSM_RESET_FAIL 0x00fc 165 166 /* aux device ID */ 167 #define PSM_MOUSE_ID 0 168 #define PSM_BALLPOINT_ID 2 169 #define PSM_INTELLI_ID 3 170 #define PSM_EXPLORER_ID 4 171 #define PSM_4DMOUSE_ID 6 172 #define PSM_4DPLUS_ID 8 173 #define PSM_4DPLUS_RFSW35_ID 24 174 175 #ifdef _KERNEL 176 177 #define ATKBDC_DRIVER_NAME "atkbdc" 178 179 /* 180 * driver specific options: the following options may be set by 181 * `options' statements in the kernel configuration file. 182 */ 183 184 /* retry count */ 185 #ifndef KBD_MAXRETRY 186 #define KBD_MAXRETRY 3 187 #endif 188 189 /* timing parameters */ 190 #ifndef KBD_RESETDELAY 191 #define KBD_RESETDELAY 200 /* wait 200msec after kbd/mouse reset */ 192 #endif 193 #ifndef KBD_MAXWAIT 194 #define KBD_MAXWAIT 5 /* wait 5 times at most after reset */ 195 #endif 196 197 /* I/O recovery time */ 198 #define KBDC_DELAYTIME 20 199 #define KBDD_DELAYTIME 7 200 201 /* debug option */ 202 #ifndef KBDIO_DEBUG 203 #define KBDIO_DEBUG 0 204 #endif 205 206 /* end of driver specific options */ 207 208 /* types/structures */ 209 210 #define KBDQ_BUFSIZE 32 211 212 typedef struct _kbdkqueue { 213 int head; 214 int tail; 215 unsigned char q[KBDQ_BUFSIZE]; 216 #if KBDIO_DEBUG >= 2 217 int call_count; 218 int qcount; 219 int max_qcount; 220 #endif 221 } kbdkqueue; 222 223 struct resource; 224 225 typedef struct atkbdc_softc { 226 struct resource *port0; /* data port */ 227 struct resource *port1; /* status port */ 228 bus_space_tag_t iot; 229 bus_space_handle_t ioh0; 230 bus_space_handle_t ioh1; 231 int command_byte; /* current command byte value */ 232 int command_mask; /* command byte mask bits for kbd/aux devices */ 233 int mux_active; /* multiplexer is active */ 234 int lock; /* FIXME: XXX not quite a semaphore... */ 235 kbdkqueue kbd; /* keyboard data queue */ 236 kbdkqueue aux; /* auxiliary data queue */ 237 } atkbdc_softc_t; 238 239 enum kbdc_device_ivar { 240 KBDC_IVAR_IRQ, 241 KBDC_IVAR_FLAGS, 242 KBDC_IVAR_VENDORID, 243 KBDC_IVAR_SERIAL, 244 KBDC_IVAR_LOGICALID, 245 KBDC_IVAR_COMPATID, 246 }; 247 248 typedef struct atkbdc_softc *KBDC; 249 250 #define KBDC_RID_KBD 0 251 #define KBDC_RID_AUX 1 252 253 /* function prototypes */ 254 255 atkbdc_softc_t *atkbdc_get_softc(int unit); 256 int atkbdc_probe_unit(int unit, struct resource *port0, struct resource *port1); 257 int atkbdc_attach_unit(int unit, atkbdc_softc_t *sc, struct resource *port0, 258 struct resource *port1); 259 int atkbdc_configure(void); 260 261 KBDC atkbdc_open(int unit); 262 int kbdc_lock(KBDC kbdc, int lock); 263 int kbdc_data_ready(KBDC kbdc); 264 265 int write_controller_command(KBDC kbdc,int c); 266 int write_controller_data(KBDC kbdc, int c); 267 int write_controller_w1r1(KBDC kbdc, int c, int d); 268 269 int write_kbd_command(KBDC kbdc,int c); 270 int write_aux_command(KBDC kbdc,int c); 271 int send_kbd_command(KBDC kbdc,int c); 272 int send_aux_command(KBDC kbdc,int c); 273 int send_kbd_command_and_data(KBDC kbdc,int c,int d); 274 int send_aux_command_and_data(KBDC kbdc,int c,int d); 275 276 int read_controller_data(KBDC kbdc); 277 int read_kbd_data(KBDC kbdc); 278 int read_kbd_data_no_wait(KBDC kbdc); 279 int read_aux_data(KBDC kbdc); 280 int read_aux_data_no_wait(KBDC kbdc); 281 282 void empty_kbd_buffer(KBDC kbdc, int t); 283 void empty_aux_buffer(KBDC kbdc, int t); 284 void empty_both_buffers(KBDC kbdc, int t); 285 286 int reset_kbd(KBDC kbdc); 287 int reset_aux_dev(KBDC kbdc); 288 289 int test_controller(KBDC kbdc); 290 int test_kbd_port(KBDC kbdc); 291 int test_aux_port(KBDC kbdc); 292 293 int get_controller_command_byte(KBDC kbdc); 294 int set_controller_command_byte(KBDC kbdc, int command, int flag); 295 296 #endif /* _KERNEL */ 297 298 #endif /* !_DEV_KBD_ATKBDCREG_H_ */ 299