1 /*- 2 * Copyright (c) 1996-1999 3 * Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp) 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote 15 * products derived from this software without specific prior written 16 * permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * $FreeBSD: src/sys/dev/kbd/atkbdcreg.h,v 1.4.2.2 2000/03/31 12:51:57 yokota Exp $ 31 * $DragonFly: src/sys/dev/misc/kbd/atkbdcreg.h,v 1.3 2007/01/15 00:11:36 dillon Exp $ 32 * from kbdio.h,v 1.8 1998/09/25 11:55:46 yokota Exp 33 */ 34 35 #ifndef _DEV_KBD_ATKBDCREG_H_ 36 #define _DEV_KBD_ATKBDCREG_H_ 37 38 /* constants */ 39 40 /* I/O ports */ 41 #define KBD_STATUS_PORT 4 /* status port, read */ 42 #define KBD_COMMAND_PORT 4 /* controller command port, write */ 43 #define KBD_DATA_PORT 0 /* data port, read/write 44 * also used as keyboard command 45 * and mouse command port 46 */ 47 48 /* controller commands (sent to KBD_COMMAND_PORT) */ 49 #define KBDC_SET_COMMAND_BYTE 0x0060 50 #define KBDC_GET_COMMAND_BYTE 0x0020 51 #define KBDC_WRITE_TO_AUX 0x00d4 52 #define KBDC_DISABLE_AUX_PORT 0x00a7 53 #define KBDC_ENABLE_AUX_PORT 0x00a8 54 #define KBDC_TEST_AUX_PORT 0x00a9 55 #define KBDC_DIAGNOSE 0x00aa 56 #define KBDC_TEST_KBD_PORT 0x00ab 57 #define KBDC_DISABLE_KBD_PORT 0x00ad 58 #define KBDC_ENABLE_KBD_PORT 0x00ae 59 60 /* controller command byte (set by KBDC_SET_COMMAND_BYTE) */ 61 #define KBD_TRANSLATION 0x0040 62 #define KBD_RESERVED_BITS 0x0004 63 #define KBD_OVERRIDE_KBD_LOCK 0x0008 64 #define KBD_ENABLE_KBD_PORT 0x0000 65 #define KBD_DISABLE_KBD_PORT 0x0010 66 #define KBD_ENABLE_AUX_PORT 0x0000 67 #define KBD_DISABLE_AUX_PORT 0x0020 68 #define KBD_ENABLE_AUX_INT 0x0002 69 #define KBD_DISABLE_AUX_INT 0x0000 70 #define KBD_ENABLE_KBD_INT 0x0001 71 #define KBD_DISABLE_KBD_INT 0x0000 72 #define KBD_KBD_CONTROL_BITS (KBD_DISABLE_KBD_PORT | KBD_ENABLE_KBD_INT) 73 #define KBD_AUX_CONTROL_BITS (KBD_DISABLE_AUX_PORT | KBD_ENABLE_AUX_INT) 74 75 /* keyboard device commands (sent to KBD_DATA_PORT) */ 76 #define KBDC_RESET_KBD 0x00ff 77 #define KBDC_ENABLE_KBD 0x00f4 78 #define KBDC_DISABLE_KBD 0x00f5 79 #define KBDC_SET_DEFAULTS 0x00f6 80 #define KBDC_SEND_DEV_ID 0x00f2 81 #define KBDC_SET_LEDS 0x00ed 82 #define KBDC_ECHO 0x00ee 83 #define KBDC_SET_SCANCODE_SET 0x00f0 84 #define KBDC_SET_TYPEMATIC 0x00f3 85 86 /* aux device commands (sent to KBD_DATA_PORT) */ 87 #define PSMC_RESET_DEV 0x00ff 88 #define PSMC_ENABLE_DEV 0x00f4 89 #define PSMC_DISABLE_DEV 0x00f5 90 #define PSMC_SET_DEFAULTS 0x00f6 91 #define PSMC_SEND_DEV_ID 0x00f2 92 #define PSMC_SEND_DEV_STATUS 0x00e9 93 #define PSMC_SEND_DEV_DATA 0x00eb 94 #define PSMC_SET_SCALING11 0x00e6 95 #define PSMC_SET_SCALING21 0x00e7 96 #define PSMC_SET_RESOLUTION 0x00e8 97 #define PSMC_SET_STREAM_MODE 0x00ea 98 #define PSMC_SET_REMOTE_MODE 0x00f0 99 #define PSMC_SET_SAMPLING_RATE 0x00f3 100 101 /* PSMC_SET_RESOLUTION argument */ 102 #define PSMD_RES_LOW 0 /* typically 25ppi */ 103 #define PSMD_RES_MEDIUM_LOW 1 /* typically 50ppi */ 104 #define PSMD_RES_MEDIUM_HIGH 2 /* typically 100ppi (default) */ 105 #define PSMD_RES_HIGH 3 /* typically 200ppi */ 106 #define PSMD_MAX_RESOLUTION PSMD_RES_HIGH 107 108 /* PSMC_SET_SAMPLING_RATE */ 109 #define PSMD_MAX_RATE 255 /* FIXME: not sure if it's possible */ 110 111 /* status bits (KBD_STATUS_PORT) */ 112 #define KBDS_BUFFER_FULL 0x0021 113 #define KBDS_ANY_BUFFER_FULL 0x0001 114 #define KBDS_KBD_BUFFER_FULL 0x0001 115 #define KBDS_AUX_BUFFER_FULL 0x0021 116 #define KBDS_INPUT_BUFFER_FULL 0x0002 117 118 /* return code */ 119 #define KBD_ACK 0x00fa 120 #define KBD_RESEND 0x00fe 121 #define KBD_RESET_DONE 0x00aa 122 #define KBD_RESET_FAIL 0x00fc 123 #define KBD_DIAG_DONE 0x0055 124 #define KBD_DIAG_FAIL 0x00fd 125 #define KBD_ECHO 0x00ee 126 127 #define PSM_ACK 0x00fa 128 #define PSM_RESEND 0x00fe 129 #define PSM_RESET_DONE 0x00aa 130 #define PSM_RESET_FAIL 0x00fc 131 132 /* aux device ID */ 133 #define PSM_MOUSE_ID 0 134 #define PSM_BALLPOINT_ID 2 135 #define PSM_INTELLI_ID 3 136 #define PSM_EXPLORER_ID 4 137 #define PSM_4DMOUSE_ID 6 138 #define PSM_4DPLUS_ID 8 139 #define PSM_4DPLUS_RFSW35_ID 24 140 141 #ifdef _KERNEL 142 143 #define ATKBDC_DRIVER_NAME "atkbdc" 144 145 /* 146 * driver specific options: the following options may be set by 147 * `options' statements in the kernel configuration file. 148 */ 149 150 /* retry count */ 151 #ifndef KBD_MAXRETRY 152 #define KBD_MAXRETRY 3 153 #endif 154 155 /* timing parameters */ 156 #ifndef KBD_RESETDELAY 157 #define KBD_RESETDELAY 200 /* wait 200msec after kbd/mouse reset */ 158 #endif 159 #ifndef KBD_MAXWAIT 160 #define KBD_MAXWAIT 5 /* wait 5 times at most after reset */ 161 #endif 162 163 /* I/O recovery time */ 164 #define KBDC_DELAYTIME 20 165 #define KBDD_DELAYTIME 7 166 167 /* debug option */ 168 #ifndef KBDIO_DEBUG 169 #define KBDIO_DEBUG 0 170 #endif 171 172 /* end of driver specific options */ 173 174 /* types/structures */ 175 176 #define KBDQ_BUFSIZE 32 177 178 typedef struct _kbdkqueue { 179 int head; 180 int tail; 181 unsigned char q[KBDQ_BUFSIZE]; 182 #if KBDIO_DEBUG >= 2 183 int call_count; 184 int qcount; 185 int max_qcount; 186 #endif 187 } kbdkqueue; 188 189 struct resource; 190 191 typedef struct atkbdc_softc { 192 struct resource *port0; /* data port */ 193 struct resource *port1; /* status port */ 194 bus_space_tag_t iot; 195 bus_space_handle_t ioh0; 196 bus_space_handle_t ioh1; 197 int command_byte; /* current command byte value */ 198 int command_mask; /* command byte mask bits for kbd/aux devices */ 199 int lock; /* FIXME: XXX not quite a semaphore... */ 200 kbdkqueue kbd; /* keyboard data queue */ 201 kbdkqueue aux; /* auxiliary data queue */ 202 } atkbdc_softc_t; 203 204 enum kbdc_device_ivar { 205 KBDC_IVAR_IRQ, 206 KBDC_IVAR_FLAGS, 207 KBDC_IVAR_VENDORID, 208 KBDC_IVAR_SERIAL, 209 KBDC_IVAR_LOGICALID, 210 KBDC_IVAR_COMPATID, 211 }; 212 213 typedef caddr_t KBDC; 214 215 #define KBDC_RID_KBD 0 216 #define KBDC_RID_AUX 1 217 218 /* function prototypes */ 219 220 atkbdc_softc_t *atkbdc_get_softc(int unit); 221 int atkbdc_probe_unit(int unit, struct resource *port0, struct resource *port1); 222 int atkbdc_attach_unit(int unit, atkbdc_softc_t *sc, struct resource *port0, 223 struct resource *port1); 224 int atkbdc_configure(void); 225 226 KBDC atkbdc_open(int unit); 227 int kbdc_lock(KBDC kbdc, int lock); 228 int kbdc_data_ready(KBDC kbdc); 229 230 int write_controller_command(KBDC kbdc,int c); 231 int write_controller_data(KBDC kbdc,int c); 232 233 int write_kbd_command(KBDC kbdc,int c); 234 int write_aux_command(KBDC kbdc,int c); 235 int send_kbd_command(KBDC kbdc,int c); 236 int send_aux_command(KBDC kbdc,int c); 237 int send_kbd_command_and_data(KBDC kbdc,int c,int d); 238 int send_aux_command_and_data(KBDC kbdc,int c,int d); 239 240 int read_controller_data(KBDC kbdc); 241 int read_kbd_data(KBDC kbdc); 242 int read_kbd_data_no_wait(KBDC kbdc); 243 int read_aux_data(KBDC kbdc); 244 int read_aux_data_no_wait(KBDC kbdc); 245 246 void empty_kbd_buffer(KBDC kbdc, int t); 247 void empty_aux_buffer(KBDC kbdc, int t); 248 void empty_both_buffers(KBDC kbdc, int t); 249 250 int reset_kbd(KBDC kbdc); 251 int reset_aux_dev(KBDC kbdc); 252 253 int test_controller(KBDC kbdc); 254 int test_kbd_port(KBDC kbdc); 255 int test_aux_port(KBDC kbdc); 256 257 int kbdc_get_device_mask(KBDC kbdc); 258 void kbdc_set_device_mask(KBDC kbdc, int mask); 259 260 int get_controller_command_byte(KBDC kbdc); 261 int set_controller_command_byte(KBDC kbdc, int command, int flag); 262 263 #endif /* _KERNEL */ 264 265 #endif /* !_DEV_KBD_ATKBDCREG_H_ */ 266