1 /* 2 * Copyright (c) 2004-2005 Sam Leffler, Errno Consulting 3 * Copyright (c) 2004 Video54 Technologies, Inc. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer, 11 * without modification. 12 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 13 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 14 * redistribution must be conditioned upon including a substantially 15 * similar Disclaimer requirement for further binary redistribution. 16 * 3. Neither the names of the above-listed copyright holders nor the names 17 * of any contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * Alternatively, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") version 2 as published by the Free 22 * Software Foundation. 23 * 24 * NO WARRANTY 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 26 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 27 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 28 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 29 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 30 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 33 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 35 * THE POSSIBILITY OF SUCH DAMAGES. 36 * 37 * $FreeBSD: src/sys/dev/ath/if_athrate.h,v 1.4 2005/04/02 18:54:30 sam Exp $ 38 * $DragonFly: src/sys/dev/netif/ath/ath/if_athrate.h,v 1.1 2006/07/13 09:15:22 sephe Exp $ 39 */ 40 #ifndef _ATH_RATECTRL_H_ 41 #define _ATH_RATECTRL_H_ 42 43 /* 44 * Interface definitions for transmit rate control modules for the 45 * Atheros driver. 46 * 47 * A rate control module is responsible for choosing the transmit rate 48 * for each data frame. Management+control frames are always sent at 49 * a fixed rate. 50 * 51 * Only one module may be present at a time; the driver references 52 * rate control interfaces by symbol name. If multiple modules are 53 * to be supported we'll need to switch to a registration-based scheme 54 * as is currently done, for example, for authentication modules. 55 * 56 * An instance of the rate control module is attached to each device 57 * at attach time and detached when the device is destroyed. The module 58 * may associate data with each device and each node (station). Both 59 * sets of storage are opaque except for the size of the per-node storage 60 * which must be provided when the module is attached. 61 * 62 * The rate control module is notified for each state transition and 63 * station association/reassociation. Otherwise it is queried for a 64 * rate for each outgoing frame and provided status from each transmitted 65 * frame. Any ancillary processing is the responsibility of the module 66 * (e.g. if periodic processing is required then the module should setup 67 * it's own timer). 68 * 69 * In addition to the transmit rate for each frame the module must also 70 * indicate the number of attempts to make at the specified rate. If this 71 * number is != ATH_TXMAXTRY then an additional callback is made to setup 72 * additional transmit state. The rate control code is assumed to write 73 * this additional data directly to the transmit descriptor. 74 */ 75 struct ath_softc; 76 struct ath_node; 77 struct ath_desc; 78 79 struct ath_ratectrl { 80 size_t arc_space; /* space required for per-node state */ 81 }; 82 /* 83 * Attach/detach a rate control module. 84 */ 85 struct ath_ratectrl *ath_rate_attach(struct ath_softc *); 86 void ath_rate_stop(struct ath_ratectrl *); 87 void ath_rate_detach(struct ath_ratectrl *); 88 89 90 /* 91 * State storage handling. 92 */ 93 /* 94 * Initialize per-node state already allocated for the specified 95 * node; this space can be assumed initialized to zero. 96 */ 97 void ath_rate_node_init(struct ath_softc *, struct ath_node *); 98 /* 99 * Cleanup any per-node state prior to the node being reclaimed. 100 */ 101 void ath_rate_node_cleanup(struct ath_softc *, struct ath_node *); 102 /* 103 * Update rate control state on station associate/reassociate 104 * (when operating as an ap or for nodes discovered when operating 105 * in ibss mode). 106 */ 107 void ath_rate_newassoc(struct ath_softc *, struct ath_node *, 108 int isNewAssociation); 109 /* 110 * Update/reset rate control state for 802.11 state transitions. 111 * Important mostly as the analog to ath_rate_newassoc when operating 112 * in station mode. 113 */ 114 void ath_rate_newstate(struct ath_softc *, enum ieee80211_state); 115 116 /* 117 * Transmit handling. 118 */ 119 /* 120 * Return the transmit info for a data packet. If multi-rate state 121 * is to be setup then try0 should contain a value other than ATH_TXMATRY 122 * and ath_rate_setupxtxdesc will be called after deciding if the frame 123 * can be transmitted with multi-rate retry. 124 */ 125 void ath_rate_findrate(struct ath_softc *, struct ath_node *, 126 int shortPreamble, size_t frameLen, 127 uint8_t *rix, int *try0, uint8_t *txrate); 128 /* 129 * Setup any extended (multi-rate) descriptor state for a data packet. 130 * The rate index returned by ath_rate_findrate is passed back in. 131 */ 132 void ath_rate_setupxtxdesc(struct ath_softc *, struct ath_node *, 133 struct ath_desc *, int shortPreamble, uint8_t rix); 134 /* 135 * Update rate control state for a packet associated with the 136 * supplied transmit descriptor. The routine is invoked both 137 * for packets that were successfully sent and for those that 138 * failed (consult the descriptor for details). 139 */ 140 void ath_rate_tx_complete(struct ath_softc *, struct ath_node *, 141 const struct ath_desc *last, const struct ath_desc *first); 142 #endif /* _ATH_RATECTRL_H_ */ 143