1# 2# 3 4ATH_RATE?= sample # tx rate control algorithm 5 6KMOD= ath_hal 7 8HALCONTRIB= ${.CURDIR}/../../../../contrib/dev/ath/ath_hal 9 10SRCS= ah_regdomain.c 11SRCS+= ah_eeprom_v3.c ah_osdep.c ah.c 12SRCS+= device_if.h bus_if.h pci_if.h opt_wlan.h opt_inet.h opt_ath.h opt_ah.h 13 14# 15# AR5210 support; these are first generation 11a-only devices. 16# 17.PATH: ${.CURDIR}/ar5210 18SRCS+= ah_eeprom_v1.c \ 19 ar5210_attach.c ar5210_beacon.c ar5210_interrupts.c \ 20 ar5210_keycache.c ar5210_misc.c ar5210_phy.c ar5210_power.c \ 21 ar5210_recv.c ar5210_reset.c ar5210_xmit.c 22 23# 24# AR5211 support; these are second generation 11b/g/a devices 25# (but 11g was OFDM only and is not supported). 26# 27.PATH: ${.CURDIR}/ar5211 28SRCS+= ar5211_attach.c ar5211_beacon.c ar5211_interrupts.c \ 29 ar5211_keycache.c ar5211_misc.c ar5211_phy.c ar5211_power.c \ 30 ar5211_recv.c ar5211_reset.c ar5211_xmit.c 31 32# 33# AR5212 support; this covers all other pci/cardbus legacy parts. 34# 35.PATH: ${.CURDIR}/ar5212 36SRCS+= ar5212_ani.c ar5212_attach.c ar5212_beacon.c ar5212_eeprom.c \ 37 ar5212_gpio.c ar5212_interrupts.c ar5212_keycache.c ar5212_misc.c \ 38 ar5212_phy.c ar5212_power.c ar5212_recv.c ar5212_reset.c \ 39 ar5212_rfgain.c ar5212_xmit.c 40# RF backends 41SRCS+= ar5111.c 42SRCS+= ar5112.c 43SRCS+= ar2413.c 44SRCS+= ar2425.c 45SRCS+= ar5413.c 46 47# 48# AR5416, AR9130, AR9160, AR9220, AR9280, AR9285, AR9287 support. 49 50# Note enabling this support requires defining AH_SUPPORT_AR5416 51# in opt_ah.h so the 11n tx/rx descriptor format is handled. 52# 53# NB: 9160 depends on 5416 but 5416 does not require 9160 54# 55# + 5416 (Owl) 56.PATH: ${.CURDIR}/ar5416 57SRCS+= ah_eeprom_v14.c ah_eeprom_v4k.c \ 58 ar5416_ani.c ar5416_attach.c ar5416_beacon.c ar5416_btcoex.c \ 59 ar5416_cal.c ar5416_cal_iq.c ar5416_cal_adcgain.c ar5416_cal_adcdc.c \ 60 ar5416_eeprom.c ar5416_gpio.c ar5416_interrupts.c ar5416_keycache.c \ 61 ar5416_misc.c ar5416_phy.c ar5416_power.c ar5416_radar.c ar5416_spectral.c \ 62 ar5416_recv.c ar5416_reset.c ar5416_xmit.c 63 64# RF backend for 5416, 9130 and 9160 65SRCS+= ar2133.c 66 67# + AR9160 (Sowl) 68.PATH: ${.CURDIR}/ar9001 69SRCS+= ar9160_attach.c 70 71# + AR9130 - (Sowl) - Embedded (AR913x SoC) 72# 73# This requires AH_SUPPORT_AR9130 in order to function as some 74# register values have shifted for this chipset. Definig this however 75# (currently) breaks non-AR9130 chipsets - since this is an embedded 76# chipset and no other radios are glued to it, this shouldn't pose a 77# problem. 78SRCS+= ar9130_attach.c ar9130_eeprom.c ar9130_phy.c 79 80# AR9002 series chips 81# + AR9220/AR9280 - Merlin 82.PATH: ${.CURDIR}/ar9002 83SRCS+= ar9280.c ar9280_attach.c ar9280_olc.c 84 85# + AR9285 - Kite 86SRCS+= ar9285.c ar9285_reset.c ar9285_attach.c ar9285_cal.c ar9285_phy.c 87SRCS+= ar9285_diversity.c ar9285_btcoex.c 88 89# + AR9287 - Kiwi 90SRCS+= ah_eeprom_9287.c 91.PATH: ${.CURDIR}/ar9002 92SRCS+= ar9287.c ar9287_reset.c ar9287_attach.c ar9287_cal.c ar9287_olc.c 93 94# + AR9300 HAL 95.PATH: ${HALCONTRIB}/ar9300 96#SRCS+= ar9300_interrupts.c ar9300_radar.c ar9300_ani.c ar9300_keycache.c 97#SRCS+= ar9300_radio.c ar9300_xmit.c ar9300_attach.c ar9300_mci.c ar9300_stub.c 98#SRCS+= ar9300_xmit_ds.c ar9300_beacon.c ar9300_misc.c ar9300_recv.c 99#SRCS+= ar9300_stub_funcs.c ar9300_eeprom.c ar9300_paprd.c ar9300_recv_ds.c 100#SRCS+= ar9300_freebsd.c ar9300_phy.c ar9300_reset.c ar9300_gpio.c 101#SRCS+= ar9300_power.c ar9300_timer.c 102 103SRCS+= ar9300_aic.c ar9300_ani.c ar9300_attach.c ar9300_beacon.c 104SRCS+= ar9300_eeprom.c ar9300_freebsd.c ar9300_gpio.c ar9300_interrupts.c 105SRCS+= ar9300_keycache.c ar9300_mci.c ar9300_misc.c ar9300_paprd.c 106SRCS+= ar9300_phy.c ar9300_power.c ar9300_radar.c ar9300_radio.c 107SRCS+= ar9300_raw_adc_capture.c ar9300_recv.c ar9300_recv_ds.c ar9300_reset.c 108SRCS+= ar9300_rtt.c ar9300_spectral.c ar9300_stub.c 109SRCS+= ar9300_stub_funcs.c ar9300_timer.c ar9300_tx99_tgt.c ar9300_txbf.c 110SRCS+= ar9300_txbf_cal.c ar9300_xmit.c ar9300_xmit_ds.c 111# missing ar9300_sim.c 112 113KCFLAGS+= -I. -I${HAL} -I${HALCONTRIB} 114 115.include <bsd.kmod.mk> 116