1 /*
2  * Copyright (c) 2008-2010 Atheros Communications Inc.
3  * Copyright (c) 2011 Adrian Chadd, Xenion Pty Ltd.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  * $FreeBSD$
27  */
28 #include "opt_ah.h"
29 
30 #include "ah.h"
31 #include "ah_desc.h"
32 #include "ah_internal.h"
33 #include "ah_eeprom_v4k.h"
34 
35 #include "ar9002/ar9280.h"
36 #include "ar9002/ar9285.h"
37 #include "ar5416/ar5416reg.h"
38 #include "ar5416/ar5416phy.h"
39 #include "ar9002/ar9285phy.h"
40 #include "ar9002/ar9285_phy.h"
41 
42 #include "ar9002/ar9285_diversity.h"
43 
44 /*
45  * Set the antenna switch to control RX antenna diversity.
46  *
47  * If a fixed configuration is used, the LNA and div bias
48  * settings are fixed and the antenna diversity scanning routine
49  * is disabled.
50  *
51  * If a variable configuration is used, a default is programmed
52  * in and sampling commences per RXed packet.
53  *
54  * Since this is called from ar9285SetBoardValues() to setup
55  * diversity, it means that after a reset or scan, any current
56  * software diversity combining settings will be lost and won't
57  * re-appear until after the first successful sample run.
58  * Please keep this in mind if you're seeing weird performance
59  * that happens to relate to scan/diversity timing.
60  */
61 HAL_BOOL
62 ar9285SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings)
63 {
64 	int regVal;
65 	const HAL_EEPROM_v4k *ee = AH_PRIVATE(ah)->ah_eeprom;
66 	const MODAL_EEP4K_HEADER *pModal = &ee->ee_base.modalHeader;
67 	uint8_t ant_div_control1, ant_div_control2;
68 
69 	if (pModal->version < 3) {
70 		HALDEBUG(ah, HAL_DEBUG_DIVERSITY, "%s: not supported\n",
71 	    __func__);
72 		return AH_FALSE;	/* Can't do diversity */
73 	}
74 
75 	/* Store settings */
76 	AH5212(ah)->ah_antControl = settings;
77 	AH5212(ah)->ah_diversity = (settings == HAL_ANT_VARIABLE);
78 
79 	/* XXX don't fiddle if the PHY is in sleep mode or ! chan */
80 
81 	/* Begin setting the relevant registers */
82 
83 	ant_div_control1 = pModal->antdiv_ctl1;
84 	ant_div_control2 = pModal->antdiv_ctl2;
85 
86 	regVal = OS_REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
87 	regVal &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL));
88 
89 	/* enable antenna diversity only if diversityControl == HAL_ANT_VARIABLE */
90 	if (settings == HAL_ANT_VARIABLE)
91 	    regVal |= SM(ant_div_control1, AR_PHY_9285_ANT_DIV_CTL);
92 
93 	if (settings == HAL_ANT_VARIABLE) {
94 	    HALDEBUG(ah, HAL_DEBUG_DIVERSITY, "%s: HAL_ANT_VARIABLE\n",
95 	      __func__);
96 	    regVal |= SM(ant_div_control2, AR_PHY_9285_ANT_DIV_ALT_LNACONF);
97 	    regVal |= SM((ant_div_control2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
98 	    regVal |= SM((ant_div_control1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB);
99 	    regVal |= SM((ant_div_control1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
100 	} else {
101 	    if (settings == HAL_ANT_FIXED_A) {
102 		/* Diversity disabled, RX = LNA1 */
103 		HALDEBUG(ah, HAL_DEBUG_DIVERSITY, "%s: HAL_ANT_FIXED_A\n",
104 		    __func__);
105 		regVal |= SM(HAL_ANT_DIV_COMB_LNA2, AR_PHY_9285_ANT_DIV_ALT_LNACONF);
106 		regVal |= SM(HAL_ANT_DIV_COMB_LNA1, AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
107 		regVal |= SM(AR_PHY_9285_ANT_DIV_GAINTB_0, AR_PHY_9285_ANT_DIV_ALT_GAINTB);
108 		regVal |= SM(AR_PHY_9285_ANT_DIV_GAINTB_1, AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
109 	    }
110 	    else if (settings == HAL_ANT_FIXED_B) {
111 		/* Diversity disabled, RX = LNA2 */
112 		HALDEBUG(ah, HAL_DEBUG_DIVERSITY, "%s: HAL_ANT_FIXED_B\n",
113 		    __func__);
114 		regVal |= SM(HAL_ANT_DIV_COMB_LNA1, AR_PHY_9285_ANT_DIV_ALT_LNACONF);
115 		regVal |= SM(HAL_ANT_DIV_COMB_LNA2, AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
116 		regVal |= SM(AR_PHY_9285_ANT_DIV_GAINTB_1, AR_PHY_9285_ANT_DIV_ALT_GAINTB);
117 		regVal |= SM(AR_PHY_9285_ANT_DIV_GAINTB_0, AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
118 	    }
119 	}
120 
121 	OS_REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regVal);
122 	regVal = OS_REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
123 	regVal = OS_REG_READ(ah, AR_PHY_CCK_DETECT);
124 	regVal &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
125 	if (settings == HAL_ANT_VARIABLE)
126 	    regVal |= SM((ant_div_control1 >> 3), AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
127 
128 	OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regVal);
129 	regVal = OS_REG_READ(ah, AR_PHY_CCK_DETECT);
130 
131 	/*
132 	 * If Diversity combining is available and the diversity setting
133 	 * is to allow variable diversity, enable it by default.
134 	 *
135 	 * This will be eventually overridden by the software antenna
136 	 * diversity logic.
137 	 *
138 	 * Note that yes, this following section overrides the above
139 	 * settings for the LNA configuration and fast-bias.
140 	 */
141 	if (ar9285_check_div_comb(ah) && AH5212(ah)->ah_diversity == AH_TRUE) {
142 		// If support DivComb, set MAIN to LNA1 and ALT to LNA2 at the first beginning
143 		HALDEBUG(ah, HAL_DEBUG_DIVERSITY,
144 		    "%s: Enable initial settings for combined diversity\n",
145 		    __func__);
146 		regVal = OS_REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
147 		regVal &= (~(AR_PHY_9285_ANT_DIV_MAIN_LNACONF | AR_PHY_9285_ANT_DIV_ALT_LNACONF));
148 		regVal |= (HAL_ANT_DIV_COMB_LNA1 << AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S);
149 		regVal |= (HAL_ANT_DIV_COMB_LNA2 << AR_PHY_9285_ANT_DIV_ALT_LNACONF_S);
150 		regVal &= (~(AR_PHY_9285_FAST_DIV_BIAS));
151 		regVal |= (0 << AR_PHY_9285_FAST_DIV_BIAS_S);
152 		OS_REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regVal);
153 	}
154 
155 	return AH_TRUE;
156 }
157