1 /* 2 * Copyright (c) 2001 Wind River Systems 3 * Copyright (c) 1997, 1998, 1999, 2001 4 * Bill Paul <wpaul@windriver.com>. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Bill Paul. 17 * 4. Neither the name of the author nor the names of any co-contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * $FreeBSD: src/sys/dev/bge/if_bge.c,v 1.3.2.39 2005/07/03 03:41:18 silby Exp $ 34 * $DragonFly: src/sys/dev/netif/bge/if_bge.c,v 1.88 2007/12/02 07:41:10 sephe Exp $ 35 * 36 */ 37 38 /* 39 * Broadcom BCM570x family gigabit ethernet driver for FreeBSD. 40 * 41 * Written by Bill Paul <wpaul@windriver.com> 42 * Senior Engineer, Wind River Systems 43 */ 44 45 /* 46 * The Broadcom BCM5700 is based on technology originally developed by 47 * Alteon Networks as part of the Tigon I and Tigon II gigabit ethernet 48 * MAC chips. The BCM5700, sometimes refered to as the Tigon III, has 49 * two on-board MIPS R4000 CPUs and can have as much as 16MB of external 50 * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo 51 * frames, highly configurable RX filtering, and 16 RX and TX queues 52 * (which, along with RX filter rules, can be used for QOS applications). 53 * Other features, such as TCP segmentation, may be available as part 54 * of value-added firmware updates. Unlike the Tigon I and Tigon II, 55 * firmware images can be stored in hardware and need not be compiled 56 * into the driver. 57 * 58 * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will 59 * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus. 60 * 61 * The BCM5701 is a single-chip solution incorporating both the BCM5700 62 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701 63 * does not support external SSRAM. 64 * 65 * Broadcom also produces a variation of the BCM5700 under the "Altima" 66 * brand name, which is functionally similar but lacks PCI-X support. 67 * 68 * Without external SSRAM, you can only have at most 4 TX rings, 69 * and the use of the mini RX ring is disabled. This seems to imply 70 * that these features are simply not available on the BCM5701. As a 71 * result, this driver does not implement any support for the mini RX 72 * ring. 73 */ 74 75 #include "opt_polling.h" 76 #include <sys/param.h> 77 #include <sys/bus.h> 78 #include <sys/endian.h> 79 #include <sys/kernel.h> 80 #include <sys/ktr.h> 81 #include <sys/mbuf.h> 82 #include <sys/malloc.h> 83 #include <sys/queue.h> 84 #include <sys/rman.h> 85 #include <sys/serialize.h> 86 #include <sys/socket.h> 87 #include <sys/sockio.h> 88 #include <sys/sysctl.h> 89 90 #include <net/bpf.h> 91 #include <net/ethernet.h> 92 #include <net/if.h> 93 #include <net/if_arp.h> 94 #include <net/if_dl.h> 95 #include <net/if_media.h> 96 #include <net/if_types.h> 97 #include <net/ifq_var.h> 98 #include <net/vlan/if_vlan_var.h> 99 100 #include <dev/netif/mii_layer/mii.h> 101 #include <dev/netif/mii_layer/miivar.h> 102 #include <dev/netif/mii_layer/brgphyreg.h> 103 104 #include <bus/pci/pcidevs.h> 105 #include <bus/pci/pcireg.h> 106 #include <bus/pci/pcivar.h> 107 108 #include <dev/netif/bge/if_bgereg.h> 109 110 /* "device miibus" required. See GENERIC if you get errors here. */ 111 #include "miibus_if.h" 112 113 #define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) 114 #define BGE_MIN_FRAME 60 115 116 /* 117 * Various supported device vendors/types and their names. Note: the 118 * spec seems to indicate that the hardware still has Alteon's vendor 119 * ID burned into it, though it will always be overriden by the vendor 120 * ID in the EEPROM. Just to be safe, we cover all possibilities. 121 */ 122 #define BGE_DEVDESC_MAX 64 /* Maximum device description length */ 123 124 static struct bge_type bge_devs[] = { 125 { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3C996, 126 "3COM 3C996 Gigabit Ethernet" }, 127 128 { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_BCM5700, 129 "Alteon BCM5700 Gigabit Ethernet" }, 130 { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_BCM5701, 131 "Alteon BCM5701 Gigabit Ethernet" }, 132 133 { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC1000, 134 "Altima AC1000 Gigabit Ethernet" }, 135 { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC1001, 136 "Altima AC1002 Gigabit Ethernet" }, 137 { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC9100, 138 "Altima AC9100 Gigabit Ethernet" }, 139 140 { PCI_VENDOR_APPLE, PCI_PRODUCT_APPLE_BCM5701, 141 "Apple BCM5701 Gigabit Ethernet" }, 142 143 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5700, 144 "Broadcom BCM5700 Gigabit Ethernet" }, 145 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5701, 146 "Broadcom BCM5701 Gigabit Ethernet" }, 147 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702, 148 "Broadcom BCM5702 Gigabit Ethernet" }, 149 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702X, 150 "Broadcom BCM5702X Gigabit Ethernet" }, 151 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702_ALT, 152 "Broadcom BCM5702 Gigabit Ethernet" }, 153 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703, 154 "Broadcom BCM5703 Gigabit Ethernet" }, 155 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703X, 156 "Broadcom BCM5703X Gigabit Ethernet" }, 157 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703A3, 158 "Broadcom BCM5703 Gigabit Ethernet" }, 159 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704C, 160 "Broadcom BCM5704C Dual Gigabit Ethernet" }, 161 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704S, 162 "Broadcom BCM5704S Dual Gigabit Ethernet" }, 163 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704S_ALT, 164 "Broadcom BCM5704S Dual Gigabit Ethernet" }, 165 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705, 166 "Broadcom BCM5705 Gigabit Ethernet" }, 167 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705F, 168 "Broadcom BCM5705F Gigabit Ethernet" }, 169 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705K, 170 "Broadcom BCM5705K Gigabit Ethernet" }, 171 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705M, 172 "Broadcom BCM5705M Gigabit Ethernet" }, 173 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705M_ALT, 174 "Broadcom BCM5705M Gigabit Ethernet" }, 175 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5714, 176 "Broadcom BCM5714C Gigabit Ethernet" }, 177 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5714S, 178 "Broadcom BCM5714S Gigabit Ethernet" }, 179 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5715, 180 "Broadcom BCM5715 Gigabit Ethernet" }, 181 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5715S, 182 "Broadcom BCM5715S Gigabit Ethernet" }, 183 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5720, 184 "Broadcom BCM5720 Gigabit Ethernet" }, 185 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5721, 186 "Broadcom BCM5721 Gigabit Ethernet" }, 187 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5722, 188 "Broadcom BCM5722 Gigabit Ethernet" }, 189 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5750, 190 "Broadcom BCM5750 Gigabit Ethernet" }, 191 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5750M, 192 "Broadcom BCM5750M Gigabit Ethernet" }, 193 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751, 194 "Broadcom BCM5751 Gigabit Ethernet" }, 195 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751F, 196 "Broadcom BCM5751F Gigabit Ethernet" }, 197 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751M, 198 "Broadcom BCM5751M Gigabit Ethernet" }, 199 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5752, 200 "Broadcom BCM5752 Gigabit Ethernet" }, 201 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5752M, 202 "Broadcom BCM5752M Gigabit Ethernet" }, 203 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5753, 204 "Broadcom BCM5753 Gigabit Ethernet" }, 205 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5753F, 206 "Broadcom BCM5753F Gigabit Ethernet" }, 207 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5753M, 208 "Broadcom BCM5753M Gigabit Ethernet" }, 209 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5754, 210 "Broadcom BCM5754 Gigabit Ethernet" }, 211 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5754M, 212 "Broadcom BCM5754M Gigabit Ethernet" }, 213 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5755, 214 "Broadcom BCM5755 Gigabit Ethernet" }, 215 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5755M, 216 "Broadcom BCM5755M Gigabit Ethernet" }, 217 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5756, 218 "Broadcom BCM5756 Gigabit Ethernet" }, 219 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5780, 220 "Broadcom BCM5780 Gigabit Ethernet" }, 221 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5780S, 222 "Broadcom BCM5780S Gigabit Ethernet" }, 223 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5781, 224 "Broadcom BCM5781 Gigabit Ethernet" }, 225 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5782, 226 "Broadcom BCM5782 Gigabit Ethernet" }, 227 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5786, 228 "Broadcom BCM5786 Gigabit Ethernet" }, 229 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5787, 230 "Broadcom BCM5787 Gigabit Ethernet" }, 231 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5787F, 232 "Broadcom BCM5787F Gigabit Ethernet" }, 233 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5787M, 234 "Broadcom BCM5787M Gigabit Ethernet" }, 235 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5788, 236 "Broadcom BCM5788 Gigabit Ethernet" }, 237 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5789, 238 "Broadcom BCM5789 Gigabit Ethernet" }, 239 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5901, 240 "Broadcom BCM5901 Fast Ethernet" }, 241 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5901A2, 242 "Broadcom BCM5901A2 Fast Ethernet" }, 243 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5903M, 244 "Broadcom BCM5903M Fast Ethernet" }, 245 246 { PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SK_9DX1, 247 "SysKonnect Gigabit Ethernet" }, 248 249 { 0, 0, NULL } 250 }; 251 252 #define BGE_IS_JUMBO_CAPABLE(sc) ((sc)->bge_flags & BGE_FLAG_JUMBO) 253 #define BGE_IS_5700_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5700_FAMILY) 254 #define BGE_IS_5705_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_5705_PLUS) 255 #define BGE_IS_5714_FAMILY(sc) ((sc)->bge_flags & BGE_FLAG_5714_FAMILY) 256 #define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags & BGE_FLAG_575X_PLUS) 257 258 static int bge_probe(device_t); 259 static int bge_attach(device_t); 260 static int bge_detach(device_t); 261 static void bge_txeof(struct bge_softc *); 262 static void bge_rxeof(struct bge_softc *); 263 264 static void bge_tick(void *); 265 static void bge_stats_update(struct bge_softc *); 266 static void bge_stats_update_regs(struct bge_softc *); 267 static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *); 268 269 #ifdef DEVICE_POLLING 270 static void bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); 271 #endif 272 static void bge_intr(void *); 273 static void bge_enable_intr(struct bge_softc *); 274 static void bge_disable_intr(struct bge_softc *); 275 static void bge_start(struct ifnet *); 276 static int bge_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 277 static void bge_init(void *); 278 static void bge_stop(struct bge_softc *); 279 static void bge_watchdog(struct ifnet *); 280 static void bge_shutdown(device_t); 281 static int bge_suspend(device_t); 282 static int bge_resume(device_t); 283 static int bge_ifmedia_upd(struct ifnet *); 284 static void bge_ifmedia_sts(struct ifnet *, struct ifmediareq *); 285 286 static uint8_t bge_eeprom_getbyte(struct bge_softc *, uint32_t, uint8_t *); 287 static int bge_read_eeprom(struct bge_softc *, caddr_t, uint32_t, size_t); 288 289 static void bge_setmulti(struct bge_softc *); 290 static void bge_setpromisc(struct bge_softc *); 291 292 static int bge_alloc_jumbo_mem(struct bge_softc *); 293 static void bge_free_jumbo_mem(struct bge_softc *); 294 static struct bge_jslot 295 *bge_jalloc(struct bge_softc *); 296 static void bge_jfree(void *); 297 static void bge_jref(void *); 298 static int bge_newbuf_std(struct bge_softc *, int, struct mbuf *); 299 static int bge_newbuf_jumbo(struct bge_softc *, int, struct mbuf *); 300 static int bge_init_rx_ring_std(struct bge_softc *); 301 static void bge_free_rx_ring_std(struct bge_softc *); 302 static int bge_init_rx_ring_jumbo(struct bge_softc *); 303 static void bge_free_rx_ring_jumbo(struct bge_softc *); 304 static void bge_free_tx_ring(struct bge_softc *); 305 static int bge_init_tx_ring(struct bge_softc *); 306 307 static int bge_chipinit(struct bge_softc *); 308 static int bge_blockinit(struct bge_softc *); 309 310 static uint32_t bge_readmem_ind(struct bge_softc *, uint32_t); 311 static void bge_writemem_ind(struct bge_softc *, uint32_t, uint32_t); 312 #ifdef notdef 313 static uint32_t bge_readreg_ind(struct bge_softc *, uint32_t); 314 #endif 315 static void bge_writereg_ind(struct bge_softc *, uint32_t, uint32_t); 316 static void bge_writemem_direct(struct bge_softc *, uint32_t, uint32_t); 317 318 static int bge_miibus_readreg(device_t, int, int); 319 static int bge_miibus_writereg(device_t, int, int, int); 320 static void bge_miibus_statchg(device_t); 321 static void bge_bcm5700_link_upd(struct bge_softc *, uint32_t); 322 static void bge_tbi_link_upd(struct bge_softc *, uint32_t); 323 static void bge_copper_link_upd(struct bge_softc *, uint32_t); 324 325 static void bge_reset(struct bge_softc *); 326 327 static void bge_dma_map_addr(void *, bus_dma_segment_t *, int, int); 328 static void bge_dma_map_mbuf(void *, bus_dma_segment_t *, int, 329 bus_size_t, int); 330 static int bge_dma_alloc(struct bge_softc *); 331 static void bge_dma_free(struct bge_softc *); 332 static int bge_dma_block_alloc(struct bge_softc *, bus_size_t, 333 bus_dma_tag_t *, bus_dmamap_t *, 334 void **, bus_addr_t *); 335 static void bge_dma_block_free(bus_dma_tag_t, bus_dmamap_t, void *); 336 337 static void bge_coal_change(struct bge_softc *); 338 static int bge_sysctl_rx_coal_ticks(SYSCTL_HANDLER_ARGS); 339 static int bge_sysctl_tx_coal_ticks(SYSCTL_HANDLER_ARGS); 340 static int bge_sysctl_rx_max_coal_bds(SYSCTL_HANDLER_ARGS); 341 static int bge_sysctl_tx_max_coal_bds(SYSCTL_HANDLER_ARGS); 342 static int bge_sysctl_coal_chg(SYSCTL_HANDLER_ARGS, uint32_t *, uint32_t); 343 344 /* 345 * Set following tunable to 1 for some IBM blade servers with the DNLK 346 * switch module. Auto negotiation is broken for those configurations. 347 */ 348 static int bge_fake_autoneg = 0; 349 TUNABLE_INT("hw.bge.fake_autoneg", &bge_fake_autoneg); 350 351 /* Interrupt moderation control variables. */ 352 static int bge_rx_coal_ticks = 150; /* usec */ 353 static int bge_tx_coal_ticks = 1000000; /* usec */ 354 static int bge_rx_max_coal_bds = 16; 355 static int bge_tx_max_coal_bds = 32; 356 357 TUNABLE_INT("hw.bge.rx_coal_ticks", &bge_rx_coal_ticks); 358 TUNABLE_INT("hw.bge.tx_coal_ticks", &bge_tx_coal_ticks); 359 TUNABLE_INT("hw.bge.rx_max_coal_bds", &bge_rx_max_coal_bds); 360 TUNABLE_INT("hw.bge.tx_max_coal_bds", &bge_tx_max_coal_bds); 361 362 #if !defined(KTR_IF_BGE) 363 #define KTR_IF_BGE KTR_ALL 364 #endif 365 KTR_INFO_MASTER(if_bge); 366 KTR_INFO(KTR_IF_BGE, if_bge, intr, 0, "intr", 0); 367 KTR_INFO(KTR_IF_BGE, if_bge, rx_pkt, 1, "rx_pkt", 0); 368 KTR_INFO(KTR_IF_BGE, if_bge, tx_pkt, 2, "tx_pkt", 0); 369 #define logif(name) KTR_LOG(if_bge_ ## name) 370 371 static device_method_t bge_methods[] = { 372 /* Device interface */ 373 DEVMETHOD(device_probe, bge_probe), 374 DEVMETHOD(device_attach, bge_attach), 375 DEVMETHOD(device_detach, bge_detach), 376 DEVMETHOD(device_shutdown, bge_shutdown), 377 DEVMETHOD(device_suspend, bge_suspend), 378 DEVMETHOD(device_resume, bge_resume), 379 380 /* bus interface */ 381 DEVMETHOD(bus_print_child, bus_generic_print_child), 382 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 383 384 /* MII interface */ 385 DEVMETHOD(miibus_readreg, bge_miibus_readreg), 386 DEVMETHOD(miibus_writereg, bge_miibus_writereg), 387 DEVMETHOD(miibus_statchg, bge_miibus_statchg), 388 389 { 0, 0 } 390 }; 391 392 static DEFINE_CLASS_0(bge, bge_driver, bge_methods, sizeof(struct bge_softc)); 393 static devclass_t bge_devclass; 394 395 DECLARE_DUMMY_MODULE(if_bge); 396 DRIVER_MODULE(if_bge, pci, bge_driver, bge_devclass, 0, 0); 397 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0); 398 399 static uint32_t 400 bge_readmem_ind(struct bge_softc *sc, uint32_t off) 401 { 402 device_t dev = sc->bge_dev; 403 uint32_t val; 404 405 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 406 val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4); 407 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 408 return (val); 409 } 410 411 static void 412 bge_writemem_ind(struct bge_softc *sc, uint32_t off, uint32_t val) 413 { 414 device_t dev = sc->bge_dev; 415 416 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4); 417 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4); 418 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4); 419 } 420 421 #ifdef notdef 422 static uint32_t 423 bge_readreg_ind(struct bge_softc *sc, uin32_t off) 424 { 425 device_t dev = sc->bge_dev; 426 427 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 428 return(pci_read_config(dev, BGE_PCI_REG_DATA, 4)); 429 } 430 #endif 431 432 static void 433 bge_writereg_ind(struct bge_softc *sc, uint32_t off, uint32_t val) 434 { 435 device_t dev = sc->bge_dev; 436 437 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4); 438 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4); 439 } 440 441 static void 442 bge_writemem_direct(struct bge_softc *sc, uint32_t off, uint32_t val) 443 { 444 CSR_WRITE_4(sc, off, val); 445 } 446 447 /* 448 * Read a byte of data stored in the EEPROM at address 'addr.' The 449 * BCM570x supports both the traditional bitbang interface and an 450 * auto access interface for reading the EEPROM. We use the auto 451 * access method. 452 */ 453 static uint8_t 454 bge_eeprom_getbyte(struct bge_softc *sc, uint32_t addr, uint8_t *dest) 455 { 456 int i; 457 uint32_t byte = 0; 458 459 /* 460 * Enable use of auto EEPROM access so we can avoid 461 * having to use the bitbang method. 462 */ 463 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM); 464 465 /* Reset the EEPROM, load the clock period. */ 466 CSR_WRITE_4(sc, BGE_EE_ADDR, 467 BGE_EEADDR_RESET|BGE_EEHALFCLK(BGE_HALFCLK_384SCL)); 468 DELAY(20); 469 470 /* Issue the read EEPROM command. */ 471 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr); 472 473 /* Wait for completion */ 474 for(i = 0; i < BGE_TIMEOUT * 10; i++) { 475 DELAY(10); 476 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE) 477 break; 478 } 479 480 if (i == BGE_TIMEOUT) { 481 if_printf(&sc->arpcom.ac_if, "eeprom read timed out\n"); 482 return(1); 483 } 484 485 /* Get result. */ 486 byte = CSR_READ_4(sc, BGE_EE_DATA); 487 488 *dest = (byte >> ((addr % 4) * 8)) & 0xFF; 489 490 return(0); 491 } 492 493 /* 494 * Read a sequence of bytes from the EEPROM. 495 */ 496 static int 497 bge_read_eeprom(struct bge_softc *sc, caddr_t dest, uint32_t off, size_t len) 498 { 499 size_t i; 500 int err; 501 uint8_t byte; 502 503 for (byte = 0, err = 0, i = 0; i < len; i++) { 504 err = bge_eeprom_getbyte(sc, off + i, &byte); 505 if (err) 506 break; 507 *(dest + i) = byte; 508 } 509 510 return(err ? 1 : 0); 511 } 512 513 static int 514 bge_miibus_readreg(device_t dev, int phy, int reg) 515 { 516 struct bge_softc *sc; 517 struct ifnet *ifp; 518 uint32_t val, autopoll; 519 int i; 520 521 sc = device_get_softc(dev); 522 ifp = &sc->arpcom.ac_if; 523 524 /* 525 * Broadcom's own driver always assumes the internal 526 * PHY is at GMII address 1. On some chips, the PHY responds 527 * to accesses at all addresses, which could cause us to 528 * bogusly attach the PHY 32 times at probe type. Always 529 * restricting the lookup to address 1 is simpler than 530 * trying to figure out which chips revisions should be 531 * special-cased. 532 */ 533 if (phy != 1) 534 return(0); 535 536 /* Reading with autopolling on may trigger PCI errors */ 537 autopoll = CSR_READ_4(sc, BGE_MI_MODE); 538 if (autopoll & BGE_MIMODE_AUTOPOLL) { 539 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 540 DELAY(40); 541 } 542 543 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ|BGE_MICOMM_BUSY| 544 BGE_MIPHY(phy)|BGE_MIREG(reg)); 545 546 for (i = 0; i < BGE_TIMEOUT; i++) { 547 val = CSR_READ_4(sc, BGE_MI_COMM); 548 if (!(val & BGE_MICOMM_BUSY)) 549 break; 550 } 551 552 if (i == BGE_TIMEOUT) { 553 if_printf(ifp, "PHY read timed out\n"); 554 val = 0; 555 goto done; 556 } 557 558 val = CSR_READ_4(sc, BGE_MI_COMM); 559 560 done: 561 if (autopoll & BGE_MIMODE_AUTOPOLL) { 562 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 563 DELAY(40); 564 } 565 566 if (val & BGE_MICOMM_READFAIL) 567 return(0); 568 569 return(val & 0xFFFF); 570 } 571 572 static int 573 bge_miibus_writereg(device_t dev, int phy, int reg, int val) 574 { 575 struct bge_softc *sc; 576 uint32_t autopoll; 577 int i; 578 579 sc = device_get_softc(dev); 580 581 /* Reading with autopolling on may trigger PCI errors */ 582 autopoll = CSR_READ_4(sc, BGE_MI_MODE); 583 if (autopoll & BGE_MIMODE_AUTOPOLL) { 584 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 585 DELAY(40); 586 } 587 588 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE|BGE_MICOMM_BUSY| 589 BGE_MIPHY(phy)|BGE_MIREG(reg)|val); 590 591 for (i = 0; i < BGE_TIMEOUT; i++) { 592 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) 593 break; 594 } 595 596 if (autopoll & BGE_MIMODE_AUTOPOLL) { 597 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL); 598 DELAY(40); 599 } 600 601 if (i == BGE_TIMEOUT) { 602 if_printf(&sc->arpcom.ac_if, "PHY read timed out\n"); 603 return(0); 604 } 605 606 return(0); 607 } 608 609 static void 610 bge_miibus_statchg(device_t dev) 611 { 612 struct bge_softc *sc; 613 struct mii_data *mii; 614 615 sc = device_get_softc(dev); 616 mii = device_get_softc(sc->bge_miibus); 617 618 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_PORTMODE); 619 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) { 620 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_GMII); 621 } else { 622 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_MII); 623 } 624 625 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { 626 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); 627 } else { 628 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX); 629 } 630 } 631 632 /* 633 * Memory management for jumbo frames. 634 */ 635 static int 636 bge_alloc_jumbo_mem(struct bge_softc *sc) 637 { 638 struct ifnet *ifp = &sc->arpcom.ac_if; 639 struct bge_jslot *entry; 640 uint8_t *ptr; 641 bus_addr_t paddr; 642 int i, error; 643 644 /* 645 * Create tag for jumbo mbufs. 646 * This is really a bit of a kludge. We allocate a special 647 * jumbo buffer pool which (thanks to the way our DMA 648 * memory allocation works) will consist of contiguous 649 * pages. This means that even though a jumbo buffer might 650 * be larger than a page size, we don't really need to 651 * map it into more than one DMA segment. However, the 652 * default mbuf tag will result in multi-segment mappings, 653 * so we have to create a special jumbo mbuf tag that 654 * lets us get away with mapping the jumbo buffers as 655 * a single segment. I think eventually the driver should 656 * be changed so that it uses ordinary mbufs and cluster 657 * buffers, i.e. jumbo frames can span multiple DMA 658 * descriptors. But that's a project for another day. 659 */ 660 661 /* 662 * Create DMA stuffs for jumbo RX ring. 663 */ 664 error = bge_dma_block_alloc(sc, BGE_JUMBO_RX_RING_SZ, 665 &sc->bge_cdata.bge_rx_jumbo_ring_tag, 666 &sc->bge_cdata.bge_rx_jumbo_ring_map, 667 (void **)&sc->bge_ldata.bge_rx_jumbo_ring, 668 &sc->bge_ldata.bge_rx_jumbo_ring_paddr); 669 if (error) { 670 if_printf(ifp, "could not create jumbo RX ring\n"); 671 return error; 672 } 673 674 /* 675 * Create DMA stuffs for jumbo buffer block. 676 */ 677 error = bge_dma_block_alloc(sc, BGE_JMEM, 678 &sc->bge_cdata.bge_jumbo_tag, 679 &sc->bge_cdata.bge_jumbo_map, 680 (void **)&sc->bge_ldata.bge_jumbo_buf, 681 &paddr); 682 if (error) { 683 if_printf(ifp, "could not create jumbo buffer\n"); 684 return error; 685 } 686 687 SLIST_INIT(&sc->bge_jfree_listhead); 688 689 /* 690 * Now divide it up into 9K pieces and save the addresses 691 * in an array. Note that we play an evil trick here by using 692 * the first few bytes in the buffer to hold the the address 693 * of the softc structure for this interface. This is because 694 * bge_jfree() needs it, but it is called by the mbuf management 695 * code which will not pass it to us explicitly. 696 */ 697 for (i = 0, ptr = sc->bge_ldata.bge_jumbo_buf; i < BGE_JSLOTS; i++) { 698 entry = &sc->bge_cdata.bge_jslots[i]; 699 entry->bge_sc = sc; 700 entry->bge_buf = ptr; 701 entry->bge_paddr = paddr; 702 entry->bge_inuse = 0; 703 entry->bge_slot = i; 704 SLIST_INSERT_HEAD(&sc->bge_jfree_listhead, entry, jslot_link); 705 706 ptr += BGE_JLEN; 707 paddr += BGE_JLEN; 708 } 709 return 0; 710 } 711 712 static void 713 bge_free_jumbo_mem(struct bge_softc *sc) 714 { 715 /* Destroy jumbo RX ring. */ 716 bge_dma_block_free(sc->bge_cdata.bge_rx_jumbo_ring_tag, 717 sc->bge_cdata.bge_rx_jumbo_ring_map, 718 sc->bge_ldata.bge_rx_jumbo_ring); 719 720 /* Destroy jumbo buffer block. */ 721 bge_dma_block_free(sc->bge_cdata.bge_jumbo_tag, 722 sc->bge_cdata.bge_jumbo_map, 723 sc->bge_ldata.bge_jumbo_buf); 724 } 725 726 /* 727 * Allocate a jumbo buffer. 728 */ 729 static struct bge_jslot * 730 bge_jalloc(struct bge_softc *sc) 731 { 732 struct bge_jslot *entry; 733 734 lwkt_serialize_enter(&sc->bge_jslot_serializer); 735 entry = SLIST_FIRST(&sc->bge_jfree_listhead); 736 if (entry) { 737 SLIST_REMOVE_HEAD(&sc->bge_jfree_listhead, jslot_link); 738 entry->bge_inuse = 1; 739 } else { 740 if_printf(&sc->arpcom.ac_if, "no free jumbo buffers\n"); 741 } 742 lwkt_serialize_exit(&sc->bge_jslot_serializer); 743 return(entry); 744 } 745 746 /* 747 * Adjust usage count on a jumbo buffer. 748 */ 749 static void 750 bge_jref(void *arg) 751 { 752 struct bge_jslot *entry = (struct bge_jslot *)arg; 753 struct bge_softc *sc = entry->bge_sc; 754 755 if (sc == NULL) 756 panic("bge_jref: can't find softc pointer!"); 757 758 if (&sc->bge_cdata.bge_jslots[entry->bge_slot] != entry) { 759 panic("bge_jref: asked to reference buffer " 760 "that we don't manage!"); 761 } else if (entry->bge_inuse == 0) { 762 panic("bge_jref: buffer already free!"); 763 } else { 764 atomic_add_int(&entry->bge_inuse, 1); 765 } 766 } 767 768 /* 769 * Release a jumbo buffer. 770 */ 771 static void 772 bge_jfree(void *arg) 773 { 774 struct bge_jslot *entry = (struct bge_jslot *)arg; 775 struct bge_softc *sc = entry->bge_sc; 776 777 if (sc == NULL) 778 panic("bge_jfree: can't find softc pointer!"); 779 780 if (&sc->bge_cdata.bge_jslots[entry->bge_slot] != entry) { 781 panic("bge_jfree: asked to free buffer that we don't manage!"); 782 } else if (entry->bge_inuse == 0) { 783 panic("bge_jfree: buffer already free!"); 784 } else { 785 /* 786 * Possible MP race to 0, use the serializer. The atomic insn 787 * is still needed for races against bge_jref(). 788 */ 789 lwkt_serialize_enter(&sc->bge_jslot_serializer); 790 atomic_subtract_int(&entry->bge_inuse, 1); 791 if (entry->bge_inuse == 0) { 792 SLIST_INSERT_HEAD(&sc->bge_jfree_listhead, 793 entry, jslot_link); 794 } 795 lwkt_serialize_exit(&sc->bge_jslot_serializer); 796 } 797 } 798 799 800 /* 801 * Intialize a standard receive ring descriptor. 802 */ 803 static int 804 bge_newbuf_std(struct bge_softc *sc, int i, struct mbuf *m) 805 { 806 struct mbuf *m_new = NULL; 807 struct bge_dmamap_arg ctx; 808 bus_dma_segment_t seg; 809 struct bge_rx_bd *r; 810 int error; 811 812 if (m == NULL) { 813 m_new = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR); 814 if (m_new == NULL) 815 return ENOBUFS; 816 } else { 817 m_new = m; 818 m_new->m_data = m_new->m_ext.ext_buf; 819 } 820 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 821 822 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) 823 m_adj(m_new, ETHER_ALIGN); 824 825 ctx.bge_maxsegs = 1; 826 ctx.bge_segs = &seg; 827 error = bus_dmamap_load_mbuf(sc->bge_cdata.bge_mtag, 828 sc->bge_cdata.bge_rx_std_dmamap[i], 829 m_new, bge_dma_map_mbuf, &ctx, 830 BUS_DMA_NOWAIT); 831 if (error || ctx.bge_maxsegs == 0) { 832 if (m == NULL) 833 m_freem(m_new); 834 return ENOMEM; 835 } 836 837 sc->bge_cdata.bge_rx_std_chain[i] = m_new; 838 839 r = &sc->bge_ldata.bge_rx_std_ring[i]; 840 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(ctx.bge_segs[0].ds_addr); 841 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(ctx.bge_segs[0].ds_addr); 842 r->bge_flags = BGE_RXBDFLAG_END; 843 r->bge_len = m_new->m_len; 844 r->bge_idx = i; 845 846 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 847 sc->bge_cdata.bge_rx_std_dmamap[i], 848 BUS_DMASYNC_PREREAD); 849 return 0; 850 } 851 852 /* 853 * Initialize a jumbo receive ring descriptor. This allocates 854 * a jumbo buffer from the pool managed internally by the driver. 855 */ 856 static int 857 bge_newbuf_jumbo(struct bge_softc *sc, int i, struct mbuf *m) 858 { 859 struct mbuf *m_new = NULL; 860 struct bge_jslot *buf; 861 struct bge_rx_bd *r; 862 bus_addr_t paddr; 863 864 if (m == NULL) { 865 /* Allocate the mbuf. */ 866 MGETHDR(m_new, MB_DONTWAIT, MT_DATA); 867 if (m_new == NULL) 868 return(ENOBUFS); 869 870 /* Allocate the jumbo buffer */ 871 buf = bge_jalloc(sc); 872 if (buf == NULL) { 873 m_freem(m_new); 874 if_printf(&sc->arpcom.ac_if, "jumbo allocation failed " 875 "-- packet dropped!\n"); 876 return ENOBUFS; 877 } 878 879 /* Attach the buffer to the mbuf. */ 880 m_new->m_ext.ext_arg = buf; 881 m_new->m_ext.ext_buf = buf->bge_buf; 882 m_new->m_ext.ext_free = bge_jfree; 883 m_new->m_ext.ext_ref = bge_jref; 884 m_new->m_ext.ext_size = BGE_JUMBO_FRAMELEN; 885 886 m_new->m_flags |= M_EXT; 887 } else { 888 KKASSERT(m->m_flags & M_EXT); 889 m_new = m; 890 buf = m_new->m_ext.ext_arg; 891 } 892 m_new->m_data = m_new->m_ext.ext_buf; 893 m_new->m_len = m_new->m_pkthdr.len = m_new->m_ext.ext_size; 894 895 paddr = buf->bge_paddr; 896 if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) { 897 m_adj(m_new, ETHER_ALIGN); 898 paddr += ETHER_ALIGN; 899 } 900 901 /* Set up the descriptor. */ 902 sc->bge_cdata.bge_rx_jumbo_chain[i] = m_new; 903 904 r = &sc->bge_ldata.bge_rx_jumbo_ring[i]; 905 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(paddr); 906 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(paddr); 907 r->bge_flags = BGE_RXBDFLAG_END|BGE_RXBDFLAG_JUMBO_RING; 908 r->bge_len = m_new->m_len; 909 r->bge_idx = i; 910 911 return 0; 912 } 913 914 /* 915 * The standard receive ring has 512 entries in it. At 2K per mbuf cluster, 916 * that's 1MB or memory, which is a lot. For now, we fill only the first 917 * 256 ring entries and hope that our CPU is fast enough to keep up with 918 * the NIC. 919 */ 920 static int 921 bge_init_rx_ring_std(struct bge_softc *sc) 922 { 923 int i; 924 925 for (i = 0; i < BGE_SSLOTS; i++) { 926 if (bge_newbuf_std(sc, i, NULL) == ENOBUFS) 927 return(ENOBUFS); 928 }; 929 930 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 931 sc->bge_cdata.bge_rx_std_ring_map, 932 BUS_DMASYNC_PREWRITE); 933 934 sc->bge_std = i - 1; 935 CSR_WRITE_4(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std); 936 937 return(0); 938 } 939 940 static void 941 bge_free_rx_ring_std(struct bge_softc *sc) 942 { 943 int i; 944 945 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 946 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) { 947 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 948 sc->bge_cdata.bge_rx_std_dmamap[i]); 949 m_freem(sc->bge_cdata.bge_rx_std_chain[i]); 950 sc->bge_cdata.bge_rx_std_chain[i] = NULL; 951 } 952 bzero(&sc->bge_ldata.bge_rx_std_ring[i], 953 sizeof(struct bge_rx_bd)); 954 } 955 } 956 957 static int 958 bge_init_rx_ring_jumbo(struct bge_softc *sc) 959 { 960 int i; 961 struct bge_rcb *rcb; 962 963 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 964 if (bge_newbuf_jumbo(sc, i, NULL) == ENOBUFS) 965 return(ENOBUFS); 966 }; 967 968 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 969 sc->bge_cdata.bge_rx_jumbo_ring_map, 970 BUS_DMASYNC_PREWRITE); 971 972 sc->bge_jumbo = i - 1; 973 974 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 975 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 0); 976 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 977 978 CSR_WRITE_4(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo); 979 980 return(0); 981 } 982 983 static void 984 bge_free_rx_ring_jumbo(struct bge_softc *sc) 985 { 986 int i; 987 988 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) { 989 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) { 990 m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]); 991 sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL; 992 } 993 bzero(&sc->bge_ldata.bge_rx_jumbo_ring[i], 994 sizeof(struct bge_rx_bd)); 995 } 996 } 997 998 static void 999 bge_free_tx_ring(struct bge_softc *sc) 1000 { 1001 int i; 1002 1003 for (i = 0; i < BGE_TX_RING_CNT; i++) { 1004 if (sc->bge_cdata.bge_tx_chain[i] != NULL) { 1005 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 1006 sc->bge_cdata.bge_tx_dmamap[i]); 1007 m_freem(sc->bge_cdata.bge_tx_chain[i]); 1008 sc->bge_cdata.bge_tx_chain[i] = NULL; 1009 } 1010 bzero(&sc->bge_ldata.bge_tx_ring[i], 1011 sizeof(struct bge_tx_bd)); 1012 } 1013 } 1014 1015 static int 1016 bge_init_tx_ring(struct bge_softc *sc) 1017 { 1018 sc->bge_txcnt = 0; 1019 sc->bge_tx_saved_considx = 0; 1020 sc->bge_tx_prodidx = 0; 1021 1022 /* Initialize transmit producer index for host-memory send ring. */ 1023 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx); 1024 1025 /* 5700 b2 errata */ 1026 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1027 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, 0); 1028 1029 CSR_WRITE_4(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1030 /* 5700 b2 errata */ 1031 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 1032 CSR_WRITE_4(sc, BGE_MBX_TX_NIC_PROD0_LO, 0); 1033 1034 return(0); 1035 } 1036 1037 static void 1038 bge_setmulti(struct bge_softc *sc) 1039 { 1040 struct ifnet *ifp; 1041 struct ifmultiaddr *ifma; 1042 uint32_t hashes[4] = { 0, 0, 0, 0 }; 1043 int h, i; 1044 1045 ifp = &sc->arpcom.ac_if; 1046 1047 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 1048 for (i = 0; i < 4; i++) 1049 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF); 1050 return; 1051 } 1052 1053 /* First, zot all the existing filters. */ 1054 for (i = 0; i < 4; i++) 1055 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0); 1056 1057 /* Now program new ones. */ 1058 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 1059 if (ifma->ifma_addr->sa_family != AF_LINK) 1060 continue; 1061 h = ether_crc32_le( 1062 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 1063 ETHER_ADDR_LEN) & 0x7f; 1064 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); 1065 } 1066 1067 for (i = 0; i < 4; i++) 1068 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]); 1069 } 1070 1071 /* 1072 * Do endian, PCI and DMA initialization. Also check the on-board ROM 1073 * self-test results. 1074 */ 1075 static int 1076 bge_chipinit(struct bge_softc *sc) 1077 { 1078 int i; 1079 uint32_t dma_rw_ctl; 1080 1081 /* Set endian type before we access any non-PCI registers. */ 1082 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, BGE_INIT, 4); 1083 1084 /* 1085 * Check the 'ROM failed' bit on the RX CPU to see if 1086 * self-tests passed. 1087 */ 1088 if (CSR_READ_4(sc, BGE_RXCPU_MODE) & BGE_RXCPUMODE_ROMFAIL) { 1089 if_printf(&sc->arpcom.ac_if, 1090 "RX CPU self-diagnostics failed!\n"); 1091 return(ENODEV); 1092 } 1093 1094 /* Clear the MAC control register */ 1095 CSR_WRITE_4(sc, BGE_MAC_MODE, 0); 1096 1097 /* 1098 * Clear the MAC statistics block in the NIC's 1099 * internal memory. 1100 */ 1101 for (i = BGE_STATS_BLOCK; 1102 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t)) 1103 BGE_MEMWIN_WRITE(sc, i, 0); 1104 1105 for (i = BGE_STATUS_BLOCK; 1106 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t)) 1107 BGE_MEMWIN_WRITE(sc, i, 0); 1108 1109 /* Set up the PCI DMA control register. */ 1110 if (sc->bge_flags & BGE_FLAG_PCIE) { 1111 /* PCI Express */ 1112 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD | 1113 (0xf << BGE_PCIDMARWCTL_RD_WAT_SHIFT) | 1114 (0x2 << BGE_PCIDMARWCTL_WR_WAT_SHIFT); 1115 } else if (sc->bge_flags & BGE_FLAG_PCIX) { 1116 /* PCI-X bus */ 1117 if (BGE_IS_5714_FAMILY(sc)) { 1118 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD; 1119 dma_rw_ctl &= ~BGE_PCIDMARWCTL_ONEDMA_ATONCE; /* XXX */ 1120 /* XXX magic values, Broadcom-supplied Linux driver */ 1121 if (sc->bge_asicrev == BGE_ASICREV_BCM5780) { 1122 dma_rw_ctl |= (1 << 20) | (1 << 18) | 1123 BGE_PCIDMARWCTL_ONEDMA_ATONCE; 1124 } else { 1125 dma_rw_ctl |= (1 << 20) | (1 << 18) | (1 << 15); 1126 } 1127 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1128 /* 1129 * The 5704 uses a different encoding of read/write 1130 * watermarks. 1131 */ 1132 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD | 1133 (0x7 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) | 1134 (0x3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT); 1135 } else { 1136 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD | 1137 (0x3 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) | 1138 (0x3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT) | 1139 (0x0F); 1140 } 1141 1142 /* 1143 * 5703 and 5704 need ONEDMA_AT_ONCE as a workaround 1144 * for hardware bugs. 1145 */ 1146 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1147 sc->bge_asicrev == BGE_ASICREV_BCM5704) { 1148 uint32_t tmp; 1149 1150 tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1f; 1151 if (tmp == 0x6 || tmp == 0x7) 1152 dma_rw_ctl |= BGE_PCIDMARWCTL_ONEDMA_ATONCE; 1153 } 1154 } else { 1155 /* Conventional PCI bus */ 1156 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD | 1157 (0x7 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) | 1158 (0x7 << BGE_PCIDMARWCTL_WR_WAT_SHIFT) | 1159 (0x0F); 1160 } 1161 1162 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 || 1163 sc->bge_asicrev == BGE_ASICREV_BCM5704 || 1164 sc->bge_asicrev == BGE_ASICREV_BCM5705) 1165 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA; 1166 pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4); 1167 1168 /* 1169 * Set up general mode register. 1170 */ 1171 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS| 1172 BGE_MODECTL_MAC_ATTN_INTR|BGE_MODECTL_HOST_SEND_BDS| 1173 BGE_MODECTL_TX_NO_PHDR_CSUM); 1174 1175 /* 1176 * Disable memory write invalidate. Apparently it is not supported 1177 * properly by these devices. 1178 */ 1179 PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_MWIEN, 4); 1180 1181 /* Set the timer prescaler (always 66Mhz) */ 1182 CSR_WRITE_4(sc, BGE_MISC_CFG, 65 << 1/*BGE_32BITTIME_66MHZ*/); 1183 1184 return(0); 1185 } 1186 1187 static int 1188 bge_blockinit(struct bge_softc *sc) 1189 { 1190 struct bge_rcb *rcb; 1191 bus_size_t vrcb; 1192 bge_hostaddr taddr; 1193 uint32_t val; 1194 int i; 1195 1196 /* 1197 * Initialize the memory window pointer register so that 1198 * we can access the first 32K of internal NIC RAM. This will 1199 * allow us to set up the TX send ring RCBs and the RX return 1200 * ring RCBs, plus other things which live in NIC memory. 1201 */ 1202 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0); 1203 1204 /* Note: the BCM5704 has a smaller mbuf space than other chips. */ 1205 1206 if (!BGE_IS_5705_PLUS(sc)) { 1207 /* Configure mbuf memory pool */ 1208 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1); 1209 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) 1210 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000); 1211 else 1212 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000); 1213 1214 /* Configure DMA resource pool */ 1215 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR, 1216 BGE_DMA_DESCRIPTORS); 1217 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000); 1218 } 1219 1220 /* Configure mbuf pool watermarks */ 1221 if (BGE_IS_5705_PLUS(sc)) { 1222 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0); 1223 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10); 1224 } else { 1225 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50); 1226 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20); 1227 } 1228 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60); 1229 1230 /* Configure DMA resource watermarks */ 1231 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5); 1232 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10); 1233 1234 /* Enable buffer manager */ 1235 if (!BGE_IS_5705_PLUS(sc)) { 1236 CSR_WRITE_4(sc, BGE_BMAN_MODE, 1237 BGE_BMANMODE_ENABLE|BGE_BMANMODE_LOMBUF_ATTN); 1238 1239 /* Poll for buffer manager start indication */ 1240 for (i = 0; i < BGE_TIMEOUT; i++) { 1241 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE) 1242 break; 1243 DELAY(10); 1244 } 1245 1246 if (i == BGE_TIMEOUT) { 1247 if_printf(&sc->arpcom.ac_if, 1248 "buffer manager failed to start\n"); 1249 return(ENXIO); 1250 } 1251 } 1252 1253 /* Enable flow-through queues */ 1254 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 1255 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 1256 1257 /* Wait until queue initialization is complete */ 1258 for (i = 0; i < BGE_TIMEOUT; i++) { 1259 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0) 1260 break; 1261 DELAY(10); 1262 } 1263 1264 if (i == BGE_TIMEOUT) { 1265 if_printf(&sc->arpcom.ac_if, 1266 "flow-through queue init failed\n"); 1267 return(ENXIO); 1268 } 1269 1270 /* Initialize the standard RX ring control block */ 1271 rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb; 1272 rcb->bge_hostaddr.bge_addr_lo = 1273 BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr); 1274 rcb->bge_hostaddr.bge_addr_hi = 1275 BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr); 1276 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 1277 sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD); 1278 if (BGE_IS_5705_PLUS(sc)) 1279 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0); 1280 else 1281 rcb->bge_maxlen_flags = 1282 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0); 1283 rcb->bge_nicaddr = BGE_STD_RX_RINGS; 1284 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi); 1285 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo); 1286 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags); 1287 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr); 1288 1289 /* 1290 * Initialize the jumbo RX ring control block 1291 * We set the 'ring disabled' bit in the flags 1292 * field until we're actually ready to start 1293 * using this ring (i.e. once we set the MTU 1294 * high enough to require it). 1295 */ 1296 if (BGE_IS_JUMBO_CAPABLE(sc)) { 1297 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb; 1298 1299 rcb->bge_hostaddr.bge_addr_lo = 1300 BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 1301 rcb->bge_hostaddr.bge_addr_hi = 1302 BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr); 1303 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 1304 sc->bge_cdata.bge_rx_jumbo_ring_map, 1305 BUS_DMASYNC_PREREAD); 1306 rcb->bge_maxlen_flags = 1307 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 1308 BGE_RCB_FLAG_RING_DISABLED); 1309 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS; 1310 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI, 1311 rcb->bge_hostaddr.bge_addr_hi); 1312 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO, 1313 rcb->bge_hostaddr.bge_addr_lo); 1314 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, 1315 rcb->bge_maxlen_flags); 1316 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr); 1317 1318 /* Set up dummy disabled mini ring RCB */ 1319 rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb; 1320 rcb->bge_maxlen_flags = 1321 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED); 1322 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS, 1323 rcb->bge_maxlen_flags); 1324 } 1325 1326 /* 1327 * Set the BD ring replentish thresholds. The recommended 1328 * values are 1/8th the number of descriptors allocated to 1329 * each ring. 1330 */ 1331 if (BGE_IS_5705_PLUS(sc)) 1332 val = 8; 1333 else 1334 val = BGE_STD_RX_RING_CNT / 8; 1335 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val); 1336 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, BGE_JUMBO_RX_RING_CNT/8); 1337 1338 /* 1339 * Disable all unused send rings by setting the 'ring disabled' 1340 * bit in the flags field of all the TX send ring control blocks. 1341 * These are located in NIC memory. 1342 */ 1343 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 1344 for (i = 0; i < BGE_TX_RINGS_EXTSSRAM_MAX; i++) { 1345 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1346 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED)); 1347 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 1348 vrcb += sizeof(struct bge_rcb); 1349 } 1350 1351 /* Configure TX RCB 0 (we use only the first ring) */ 1352 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB; 1353 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr); 1354 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 1355 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 1356 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 1357 BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT)); 1358 if (!BGE_IS_5705_PLUS(sc)) { 1359 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1360 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0)); 1361 } 1362 1363 /* Disable all unused RX return rings */ 1364 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 1365 for (i = 0; i < BGE_RX_RINGS_MAX; i++) { 1366 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0); 1367 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0); 1368 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1369 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 1370 BGE_RCB_FLAG_RING_DISABLED)); 1371 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0); 1372 CSR_WRITE_4(sc, BGE_MBX_RX_CONS0_LO + 1373 (i * (sizeof(uint64_t))), 0); 1374 vrcb += sizeof(struct bge_rcb); 1375 } 1376 1377 /* Initialize RX ring indexes */ 1378 CSR_WRITE_4(sc, BGE_MBX_RX_STD_PROD_LO, 0); 1379 CSR_WRITE_4(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0); 1380 CSR_WRITE_4(sc, BGE_MBX_RX_MINI_PROD_LO, 0); 1381 1382 /* 1383 * Set up RX return ring 0 1384 * Note that the NIC address for RX return rings is 0x00000000. 1385 * The return rings live entirely within the host, so the 1386 * nicaddr field in the RCB isn't used. 1387 */ 1388 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB; 1389 BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr); 1390 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi); 1391 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo); 1392 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0x00000000); 1393 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags, 1394 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0)); 1395 1396 /* Set random backoff seed for TX */ 1397 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF, 1398 sc->arpcom.ac_enaddr[0] + sc->arpcom.ac_enaddr[1] + 1399 sc->arpcom.ac_enaddr[2] + sc->arpcom.ac_enaddr[3] + 1400 sc->arpcom.ac_enaddr[4] + sc->arpcom.ac_enaddr[5] + 1401 BGE_TX_BACKOFF_SEED_MASK); 1402 1403 /* Set inter-packet gap */ 1404 CSR_WRITE_4(sc, BGE_TX_LENGTHS, 0x2620); 1405 1406 /* 1407 * Specify which ring to use for packets that don't match 1408 * any RX rules. 1409 */ 1410 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08); 1411 1412 /* 1413 * Configure number of RX lists. One interrupt distribution 1414 * list, sixteen active lists, one bad frames class. 1415 */ 1416 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181); 1417 1418 /* Inialize RX list placement stats mask. */ 1419 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF); 1420 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1); 1421 1422 /* Disable host coalescing until we get it set up */ 1423 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000); 1424 1425 /* Poll to make sure it's shut down. */ 1426 for (i = 0; i < BGE_TIMEOUT; i++) { 1427 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE)) 1428 break; 1429 DELAY(10); 1430 } 1431 1432 if (i == BGE_TIMEOUT) { 1433 if_printf(&sc->arpcom.ac_if, 1434 "host coalescing engine failed to idle\n"); 1435 return(ENXIO); 1436 } 1437 1438 /* Set up host coalescing defaults */ 1439 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks); 1440 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks); 1441 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds); 1442 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds); 1443 if (!BGE_IS_5705_PLUS(sc)) { 1444 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0); 1445 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0); 1446 } 1447 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 1); 1448 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 1); 1449 1450 /* Set up address of statistics block */ 1451 if (!BGE_IS_5705_PLUS(sc)) { 1452 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, 1453 BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr)); 1454 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO, 1455 BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr)); 1456 1457 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK); 1458 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK); 1459 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks); 1460 } 1461 1462 /* Set up address of status block */ 1463 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, 1464 BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr)); 1465 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO, 1466 BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr)); 1467 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx = 0; 1468 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx = 0; 1469 1470 /* Turn on host coalescing state machine */ 1471 CSR_WRITE_4(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 1472 1473 /* Turn on RX BD completion state machine and enable attentions */ 1474 CSR_WRITE_4(sc, BGE_RBDC_MODE, 1475 BGE_RBDCMODE_ENABLE|BGE_RBDCMODE_ATTN); 1476 1477 /* Turn on RX list placement state machine */ 1478 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 1479 1480 /* Turn on RX list selector state machine. */ 1481 if (!BGE_IS_5705_PLUS(sc)) 1482 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 1483 1484 /* Turn on DMA, clear stats */ 1485 CSR_WRITE_4(sc, BGE_MAC_MODE, BGE_MACMODE_TXDMA_ENB| 1486 BGE_MACMODE_RXDMA_ENB|BGE_MACMODE_RX_STATS_CLEAR| 1487 BGE_MACMODE_TX_STATS_CLEAR|BGE_MACMODE_RX_STATS_ENB| 1488 BGE_MACMODE_TX_STATS_ENB|BGE_MACMODE_FRMHDR_DMA_ENB| 1489 ((sc->bge_flags & BGE_FLAG_TBI) ? 1490 BGE_PORTMODE_TBI : BGE_PORTMODE_MII)); 1491 1492 /* Set misc. local control, enable interrupts on attentions */ 1493 CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN); 1494 1495 #ifdef notdef 1496 /* Assert GPIO pins for PHY reset */ 1497 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0| 1498 BGE_MLC_MISCIO_OUT1|BGE_MLC_MISCIO_OUT2); 1499 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0| 1500 BGE_MLC_MISCIO_OUTEN1|BGE_MLC_MISCIO_OUTEN2); 1501 #endif 1502 1503 /* Turn on DMA completion state machine */ 1504 if (!BGE_IS_5705_PLUS(sc)) 1505 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 1506 1507 /* Turn on write DMA state machine */ 1508 val = BGE_WDMAMODE_ENABLE|BGE_WDMAMODE_ALL_ATTNS; 1509 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 1510 sc->bge_asicrev == BGE_ASICREV_BCM5787) 1511 val |= (1 << 29); /* Enable host coalescing bug fix. */ 1512 CSR_WRITE_4(sc, BGE_WDMA_MODE, val); 1513 1514 /* Turn on read DMA state machine */ 1515 CSR_WRITE_4(sc, BGE_RDMA_MODE, 1516 BGE_RDMAMODE_ENABLE|BGE_RDMAMODE_ALL_ATTNS); 1517 1518 /* Turn on RX data completion state machine */ 1519 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 1520 1521 /* Turn on RX BD initiator state machine */ 1522 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 1523 1524 /* Turn on RX data and RX BD initiator state machine */ 1525 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE); 1526 1527 /* Turn on Mbuf cluster free state machine */ 1528 if (!BGE_IS_5705_PLUS(sc)) 1529 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 1530 1531 /* Turn on send BD completion state machine */ 1532 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 1533 1534 /* Turn on send data completion state machine */ 1535 CSR_WRITE_4(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 1536 1537 /* Turn on send data initiator state machine */ 1538 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 1539 1540 /* Turn on send BD initiator state machine */ 1541 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 1542 1543 /* Turn on send BD selector state machine */ 1544 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 1545 1546 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF); 1547 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL, 1548 BGE_SDISTATSCTL_ENABLE|BGE_SDISTATSCTL_FASTER); 1549 1550 /* ack/clear link change events */ 1551 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED| 1552 BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE| 1553 BGE_MACSTAT_LINK_CHANGED); 1554 CSR_WRITE_4(sc, BGE_MI_STS, 0); 1555 1556 /* Enable PHY auto polling (for MII/GMII only) */ 1557 if (sc->bge_flags & BGE_FLAG_TBI) { 1558 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK); 1559 } else { 1560 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL|10<<16); 1561 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 1562 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { 1563 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, 1564 BGE_EVTENB_MI_INTERRUPT); 1565 } 1566 } 1567 1568 /* 1569 * Clear any pending link state attention. 1570 * Otherwise some link state change events may be lost until attention 1571 * is cleared by bge_intr() -> bge_softc.bge_link_upd() sequence. 1572 * It's not necessary on newer BCM chips - perhaps enabling link 1573 * state change attentions implies clearing pending attention. 1574 */ 1575 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED| 1576 BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE| 1577 BGE_MACSTAT_LINK_CHANGED); 1578 1579 /* Enable link state change attentions. */ 1580 BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED); 1581 1582 return(0); 1583 } 1584 1585 /* 1586 * Probe for a Broadcom chip. Check the PCI vendor and device IDs 1587 * against our list and return its name if we find a match. Note 1588 * that since the Broadcom controller contains VPD support, we 1589 * can get the device name string from the controller itself instead 1590 * of the compiled-in string. This is a little slow, but it guarantees 1591 * we'll always announce the right product name. 1592 */ 1593 static int 1594 bge_probe(device_t dev) 1595 { 1596 struct bge_softc *sc; 1597 struct bge_type *t; 1598 char *descbuf; 1599 uint16_t product, vendor; 1600 1601 product = pci_get_device(dev); 1602 vendor = pci_get_vendor(dev); 1603 1604 for (t = bge_devs; t->bge_name != NULL; t++) { 1605 if (vendor == t->bge_vid && product == t->bge_did) 1606 break; 1607 } 1608 1609 if (t->bge_name == NULL) 1610 return(ENXIO); 1611 1612 sc = device_get_softc(dev); 1613 descbuf = kmalloc(BGE_DEVDESC_MAX, M_TEMP, M_WAITOK); 1614 ksnprintf(descbuf, BGE_DEVDESC_MAX, "%s, ASIC rev. %#04x", t->bge_name, 1615 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> 16); 1616 device_set_desc_copy(dev, descbuf); 1617 if (pci_get_subvendor(dev) == PCI_VENDOR_DELL) 1618 sc->bge_flags |= BGE_FLAG_NO_3LED; 1619 kfree(descbuf, M_TEMP); 1620 return(0); 1621 } 1622 1623 static int 1624 bge_attach(device_t dev) 1625 { 1626 struct ifnet *ifp; 1627 struct bge_softc *sc; 1628 uint32_t hwcfg = 0; 1629 uint32_t mac_addr = 0; 1630 int error = 0, rid; 1631 uint8_t ether_addr[ETHER_ADDR_LEN]; 1632 1633 sc = device_get_softc(dev); 1634 sc->bge_dev = dev; 1635 callout_init(&sc->bge_stat_timer); 1636 lwkt_serialize_init(&sc->bge_jslot_serializer); 1637 1638 /* 1639 * Map control/status registers. 1640 */ 1641 pci_enable_busmaster(dev); 1642 1643 rid = BGE_PCI_BAR0; 1644 sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 1645 RF_ACTIVE); 1646 1647 if (sc->bge_res == NULL) { 1648 device_printf(dev, "couldn't map memory\n"); 1649 return ENXIO; 1650 } 1651 1652 sc->bge_btag = rman_get_bustag(sc->bge_res); 1653 sc->bge_bhandle = rman_get_bushandle(sc->bge_res); 1654 1655 /* Save ASIC rev. */ 1656 sc->bge_chipid = 1657 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) & 1658 BGE_PCIMISCCTL_ASICREV; 1659 sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid); 1660 sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid); 1661 1662 /* Save chipset family. */ 1663 switch (sc->bge_asicrev) { 1664 case BGE_ASICREV_BCM5700: 1665 case BGE_ASICREV_BCM5701: 1666 case BGE_ASICREV_BCM5703: 1667 case BGE_ASICREV_BCM5704: 1668 sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO; 1669 break; 1670 1671 case BGE_ASICREV_BCM5714_A0: 1672 case BGE_ASICREV_BCM5780: 1673 case BGE_ASICREV_BCM5714: 1674 sc->bge_flags |= BGE_FLAG_5714_FAMILY; 1675 /* Fall through */ 1676 1677 case BGE_ASICREV_BCM5750: 1678 case BGE_ASICREV_BCM5752: 1679 case BGE_ASICREV_BCM5755: 1680 case BGE_ASICREV_BCM5787: 1681 sc->bge_flags |= BGE_FLAG_575X_PLUS; 1682 /* Fall through */ 1683 1684 case BGE_ASICREV_BCM5705: 1685 sc->bge_flags |= BGE_FLAG_5705_PLUS; 1686 break; 1687 } 1688 1689 /* 1690 * Set various quirk flags. 1691 */ 1692 1693 sc->bge_flags |= BGE_FLAG_ETH_WIRESPEED; 1694 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 || 1695 (sc->bge_asicrev == BGE_ASICREV_BCM5705 && 1696 (sc->bge_chipid != BGE_CHIPID_BCM5705_A0 && 1697 sc->bge_chipid != BGE_CHIPID_BCM5705_A1)) || 1698 sc->bge_asicrev == BGE_ASICREV_BCM5906) 1699 sc->bge_flags &= ~BGE_FLAG_ETH_WIRESPEED; 1700 1701 if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 || 1702 sc->bge_chipid == BGE_CHIPID_BCM5701_B0) 1703 sc->bge_flags |= BGE_FLAG_CRC_BUG; 1704 1705 if (sc->bge_chiprev == BGE_CHIPREV_5703_AX || 1706 sc->bge_chiprev == BGE_CHIPREV_5704_AX) 1707 sc->bge_flags |= BGE_FLAG_ADC_BUG; 1708 1709 if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) 1710 sc->bge_flags |= BGE_FLAG_5704_A0_BUG; 1711 1712 if (BGE_IS_5705_PLUS(sc)) { 1713 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || 1714 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 1715 uint32_t product = pci_get_device(dev); 1716 1717 if (product != PCI_PRODUCT_BROADCOM_BCM5722 && 1718 product != PCI_PRODUCT_BROADCOM_BCM5756) 1719 sc->bge_flags |= BGE_FLAG_JITTER_BUG; 1720 if (product == PCI_PRODUCT_BROADCOM_BCM5755M) 1721 sc->bge_flags |= BGE_FLAG_ADJUST_TRIM; 1722 } else if (sc->bge_asicrev != BGE_ASICREV_BCM5906) { 1723 sc->bge_flags |= BGE_FLAG_BER_BUG; 1724 } 1725 } 1726 1727 /* Allocate interrupt */ 1728 rid = 0; 1729 1730 sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1731 RF_SHAREABLE | RF_ACTIVE); 1732 1733 if (sc->bge_irq == NULL) { 1734 device_printf(dev, "couldn't map interrupt\n"); 1735 error = ENXIO; 1736 goto fail; 1737 } 1738 1739 /* 1740 * Check if this is a PCI-X or PCI Express device. 1741 */ 1742 if (BGE_IS_5705_PLUS(sc)) { 1743 uint32_t reg; 1744 1745 reg = pci_read_config(dev, BGE_PCIE_CAPID_REG, 4); 1746 if ((reg & 0xff) == BGE_PCIE_CAPID) 1747 sc->bge_flags |= BGE_FLAG_PCIE; 1748 } else { 1749 /* 1750 * Check if the device is in PCI-X Mode. 1751 * (This bit is not valid on PCI Express controllers.) 1752 */ 1753 if ((pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4) & 1754 BGE_PCISTATE_PCI_BUSMODE) == 0) 1755 sc->bge_flags |= BGE_FLAG_PCIX; 1756 } 1757 1758 ifp = &sc->arpcom.ac_if; 1759 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 1760 1761 /* Try to reset the chip. */ 1762 bge_reset(sc); 1763 1764 if (bge_chipinit(sc)) { 1765 device_printf(dev, "chip initialization failed\n"); 1766 error = ENXIO; 1767 goto fail; 1768 } 1769 1770 /* 1771 * Get station address from the EEPROM. 1772 */ 1773 mac_addr = bge_readmem_ind(sc, 0x0c14); 1774 if ((mac_addr >> 16) == 0x484b) { 1775 ether_addr[0] = (uint8_t)(mac_addr >> 8); 1776 ether_addr[1] = (uint8_t)mac_addr; 1777 mac_addr = bge_readmem_ind(sc, 0x0c18); 1778 ether_addr[2] = (uint8_t)(mac_addr >> 24); 1779 ether_addr[3] = (uint8_t)(mac_addr >> 16); 1780 ether_addr[4] = (uint8_t)(mac_addr >> 8); 1781 ether_addr[5] = (uint8_t)mac_addr; 1782 } else if (bge_read_eeprom(sc, ether_addr, 1783 BGE_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) { 1784 device_printf(dev, "failed to read station address\n"); 1785 error = ENXIO; 1786 goto fail; 1787 } 1788 1789 /* 5705/5750 limits RX return ring to 512 entries. */ 1790 if (BGE_IS_5705_PLUS(sc)) 1791 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705; 1792 else 1793 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT; 1794 1795 error = bge_dma_alloc(sc); 1796 if (error) 1797 goto fail; 1798 1799 /* Set default tuneable values. */ 1800 sc->bge_stat_ticks = BGE_TICKS_PER_SEC; 1801 sc->bge_rx_coal_ticks = bge_rx_coal_ticks; 1802 sc->bge_tx_coal_ticks = bge_tx_coal_ticks; 1803 sc->bge_rx_max_coal_bds = bge_rx_max_coal_bds; 1804 sc->bge_tx_max_coal_bds = bge_tx_max_coal_bds; 1805 1806 /* Set up ifnet structure */ 1807 ifp->if_softc = sc; 1808 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1809 ifp->if_ioctl = bge_ioctl; 1810 ifp->if_start = bge_start; 1811 #ifdef DEVICE_POLLING 1812 ifp->if_poll = bge_poll; 1813 #endif 1814 ifp->if_watchdog = bge_watchdog; 1815 ifp->if_init = bge_init; 1816 ifp->if_mtu = ETHERMTU; 1817 ifp->if_capabilities = IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU; 1818 ifq_set_maxlen(&ifp->if_snd, BGE_TX_RING_CNT - 1); 1819 ifq_set_ready(&ifp->if_snd); 1820 1821 /* 1822 * 5700 B0 chips do not support checksumming correctly due 1823 * to hardware bugs. 1824 */ 1825 if (sc->bge_chipid != BGE_CHIPID_BCM5700_B0) { 1826 ifp->if_capabilities |= IFCAP_HWCSUM; 1827 ifp->if_hwassist = BGE_CSUM_FEATURES; 1828 } 1829 ifp->if_capenable = ifp->if_capabilities; 1830 1831 /* 1832 * Figure out what sort of media we have by checking the 1833 * hardware config word in the first 32k of NIC internal memory, 1834 * or fall back to examining the EEPROM if necessary. 1835 * Note: on some BCM5700 cards, this value appears to be unset. 1836 * If that's the case, we have to rely on identifying the NIC 1837 * by its PCI subsystem ID, as we do below for the SysKonnect 1838 * SK-9D41. 1839 */ 1840 if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) 1841 hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG); 1842 else { 1843 if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, 1844 sizeof(hwcfg))) { 1845 device_printf(dev, "failed to read EEPROM\n"); 1846 error = ENXIO; 1847 goto fail; 1848 } 1849 hwcfg = ntohl(hwcfg); 1850 } 1851 1852 if ((hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) 1853 sc->bge_flags |= BGE_FLAG_TBI; 1854 1855 /* The SysKonnect SK-9D41 is a 1000baseSX card. */ 1856 if (pci_get_subvendor(dev) == PCI_PRODUCT_SCHNEIDERKOCH_SK_9D41) 1857 sc->bge_flags |= BGE_FLAG_TBI; 1858 1859 if (sc->bge_flags & BGE_FLAG_TBI) { 1860 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK, 1861 bge_ifmedia_upd, bge_ifmedia_sts); 1862 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL); 1863 ifmedia_add(&sc->bge_ifmedia, 1864 IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL); 1865 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); 1866 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER|IFM_AUTO); 1867 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media; 1868 } else { 1869 /* 1870 * Do transceiver setup. 1871 */ 1872 if (mii_phy_probe(dev, &sc->bge_miibus, 1873 bge_ifmedia_upd, bge_ifmedia_sts)) { 1874 device_printf(dev, "MII without any PHY!\n"); 1875 error = ENXIO; 1876 goto fail; 1877 } 1878 } 1879 1880 /* 1881 * When using the BCM5701 in PCI-X mode, data corruption has 1882 * been observed in the first few bytes of some received packets. 1883 * Aligning the packet buffer in memory eliminates the corruption. 1884 * Unfortunately, this misaligns the packet payloads. On platforms 1885 * which do not support unaligned accesses, we will realign the 1886 * payloads by copying the received packets. 1887 */ 1888 if (sc->bge_asicrev == BGE_ASICREV_BCM5701 && 1889 (sc->bge_flags & BGE_FLAG_PCIX)) 1890 sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG; 1891 1892 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 && 1893 sc->bge_chipid != BGE_CHIPID_BCM5700_B2) { 1894 sc->bge_link_upd = bge_bcm5700_link_upd; 1895 sc->bge_link_chg = BGE_MACSTAT_MI_INTERRUPT; 1896 } else if (sc->bge_flags & BGE_FLAG_TBI) { 1897 sc->bge_link_upd = bge_tbi_link_upd; 1898 sc->bge_link_chg = BGE_MACSTAT_LINK_CHANGED; 1899 } else { 1900 sc->bge_link_upd = bge_copper_link_upd; 1901 sc->bge_link_chg = BGE_MACSTAT_LINK_CHANGED; 1902 } 1903 1904 /* 1905 * Create sysctl nodes. 1906 */ 1907 sysctl_ctx_init(&sc->bge_sysctl_ctx); 1908 sc->bge_sysctl_tree = SYSCTL_ADD_NODE(&sc->bge_sysctl_ctx, 1909 SYSCTL_STATIC_CHILDREN(_hw), 1910 OID_AUTO, 1911 device_get_nameunit(dev), 1912 CTLFLAG_RD, 0, ""); 1913 if (sc->bge_sysctl_tree == NULL) { 1914 device_printf(dev, "can't add sysctl node\n"); 1915 error = ENXIO; 1916 goto fail; 1917 } 1918 1919 SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx, 1920 SYSCTL_CHILDREN(sc->bge_sysctl_tree), 1921 OID_AUTO, "rx_coal_ticks", 1922 CTLTYPE_INT | CTLFLAG_RW, 1923 sc, 0, bge_sysctl_rx_coal_ticks, "I", 1924 "Receive coalescing ticks (usec)."); 1925 SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx, 1926 SYSCTL_CHILDREN(sc->bge_sysctl_tree), 1927 OID_AUTO, "tx_coal_ticks", 1928 CTLTYPE_INT | CTLFLAG_RW, 1929 sc, 0, bge_sysctl_tx_coal_ticks, "I", 1930 "Transmit coalescing ticks (usec)."); 1931 SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx, 1932 SYSCTL_CHILDREN(sc->bge_sysctl_tree), 1933 OID_AUTO, "rx_max_coal_bds", 1934 CTLTYPE_INT | CTLFLAG_RW, 1935 sc, 0, bge_sysctl_rx_max_coal_bds, "I", 1936 "Receive max coalesced BD count."); 1937 SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx, 1938 SYSCTL_CHILDREN(sc->bge_sysctl_tree), 1939 OID_AUTO, "tx_max_coal_bds", 1940 CTLTYPE_INT | CTLFLAG_RW, 1941 sc, 0, bge_sysctl_tx_max_coal_bds, "I", 1942 "Transmit max coalesced BD count."); 1943 1944 /* 1945 * Call MI attach routine. 1946 */ 1947 ether_ifattach(ifp, ether_addr, NULL); 1948 1949 error = bus_setup_intr(dev, sc->bge_irq, INTR_NETSAFE, 1950 bge_intr, sc, &sc->bge_intrhand, 1951 ifp->if_serializer); 1952 if (error) { 1953 ether_ifdetach(ifp); 1954 device_printf(dev, "couldn't set up irq\n"); 1955 goto fail; 1956 } 1957 return(0); 1958 fail: 1959 bge_detach(dev); 1960 return(error); 1961 } 1962 1963 static int 1964 bge_detach(device_t dev) 1965 { 1966 struct bge_softc *sc = device_get_softc(dev); 1967 1968 if (device_is_attached(dev)) { 1969 struct ifnet *ifp = &sc->arpcom.ac_if; 1970 1971 lwkt_serialize_enter(ifp->if_serializer); 1972 bge_stop(sc); 1973 bge_reset(sc); 1974 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand); 1975 lwkt_serialize_exit(ifp->if_serializer); 1976 1977 ether_ifdetach(ifp); 1978 } 1979 1980 if (sc->bge_flags & BGE_FLAG_TBI) 1981 ifmedia_removeall(&sc->bge_ifmedia); 1982 if (sc->bge_miibus) 1983 device_delete_child(dev, sc->bge_miibus); 1984 bus_generic_detach(dev); 1985 1986 if (sc->bge_irq != NULL) 1987 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->bge_irq); 1988 1989 if (sc->bge_res != NULL) 1990 bus_release_resource(dev, SYS_RES_MEMORY, 1991 BGE_PCI_BAR0, sc->bge_res); 1992 1993 if (sc->bge_sysctl_tree != NULL) 1994 sysctl_ctx_free(&sc->bge_sysctl_ctx); 1995 1996 bge_dma_free(sc); 1997 1998 return 0; 1999 } 2000 2001 static void 2002 bge_reset(struct bge_softc *sc) 2003 { 2004 device_t dev; 2005 uint32_t cachesize, command, pcistate, reset; 2006 void (*write_op)(struct bge_softc *, uint32_t, uint32_t); 2007 int i, val = 0; 2008 2009 dev = sc->bge_dev; 2010 2011 if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc)) { 2012 if (sc->bge_flags & BGE_FLAG_PCIE) 2013 write_op = bge_writemem_direct; 2014 else 2015 write_op = bge_writemem_ind; 2016 } else { 2017 write_op = bge_writereg_ind; 2018 } 2019 2020 /* Save some important PCI state. */ 2021 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4); 2022 command = pci_read_config(dev, BGE_PCI_CMD, 4); 2023 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4); 2024 2025 pci_write_config(dev, BGE_PCI_MISC_CTL, 2026 BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR| 2027 BGE_HIF_SWAP_OPTIONS|BGE_PCIMISCCTL_PCISTATE_RW, 4); 2028 2029 /* Disable fastboot on controllers that support it. */ 2030 if (sc->bge_asicrev == BGE_ASICREV_BCM5752 || 2031 sc->bge_asicrev == BGE_ASICREV_BCM5755 || 2032 sc->bge_asicrev == BGE_ASICREV_BCM5787) { 2033 if (bootverbose) 2034 if_printf(&sc->arpcom.ac_if, "Disabling fastboot\n"); 2035 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0); 2036 } 2037 2038 /* 2039 * Write the magic number to SRAM at offset 0xB50. 2040 * When firmware finishes its initialization it will 2041 * write ~BGE_MAGIC_NUMBER to the same location. 2042 */ 2043 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); 2044 2045 reset = BGE_MISCCFG_RESET_CORE_CLOCKS|(65<<1); 2046 2047 /* XXX: Broadcom Linux driver. */ 2048 if (sc->bge_flags & BGE_FLAG_PCIE) { 2049 if (CSR_READ_4(sc, 0x7e2c) == 0x60) /* PCIE 1.0 */ 2050 CSR_WRITE_4(sc, 0x7e2c, 0x20); 2051 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 2052 /* Prevent PCIE link training during global reset */ 2053 CSR_WRITE_4(sc, BGE_MISC_CFG, (1<<29)); 2054 reset |= (1<<29); 2055 } 2056 } 2057 2058 /* 2059 * Set GPHY Power Down Override to leave GPHY 2060 * powered up in D0 uninitialized. 2061 */ 2062 if (BGE_IS_5705_PLUS(sc)) 2063 reset |= 0x04000000; 2064 2065 /* Issue global reset */ 2066 write_op(sc, BGE_MISC_CFG, reset); 2067 2068 DELAY(1000); 2069 2070 /* XXX: Broadcom Linux driver. */ 2071 if (sc->bge_flags & BGE_FLAG_PCIE) { 2072 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) { 2073 uint32_t v; 2074 2075 DELAY(500000); /* wait for link training to complete */ 2076 v = pci_read_config(dev, 0xc4, 4); 2077 pci_write_config(dev, 0xc4, v | (1<<15), 4); 2078 } 2079 /* 2080 * Set PCIE max payload size to 128 bytes and 2081 * clear error status. 2082 */ 2083 pci_write_config(dev, 0xd8, 0xf5000, 4); 2084 } 2085 2086 /* Reset some of the PCI state that got zapped by reset */ 2087 pci_write_config(dev, BGE_PCI_MISC_CTL, 2088 BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR| 2089 BGE_HIF_SWAP_OPTIONS|BGE_PCIMISCCTL_PCISTATE_RW, 4); 2090 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4); 2091 pci_write_config(dev, BGE_PCI_CMD, command, 4); 2092 write_op(sc, BGE_MISC_CFG, (65 << 1)); 2093 2094 /* Enable memory arbiter. */ 2095 if (BGE_IS_5714_FAMILY(sc)) { 2096 uint32_t val; 2097 2098 val = CSR_READ_4(sc, BGE_MARB_MODE); 2099 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val); 2100 } else { 2101 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 2102 } 2103 2104 /* 2105 * Poll until we see the 1's complement of the magic number. 2106 * This indicates that the firmware initialization 2107 * is complete. 2108 */ 2109 for (i = 0; i < BGE_TIMEOUT; i++) { 2110 val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM); 2111 if (val == ~BGE_MAGIC_NUMBER) 2112 break; 2113 DELAY(10); 2114 } 2115 2116 if (i == BGE_TIMEOUT) { 2117 if_printf(&sc->arpcom.ac_if, "firmware handshake timed out," 2118 "found 0x%08x\n", val); 2119 return; 2120 } 2121 2122 /* 2123 * XXX Wait for the value of the PCISTATE register to 2124 * return to its original pre-reset state. This is a 2125 * fairly good indicator of reset completion. If we don't 2126 * wait for the reset to fully complete, trying to read 2127 * from the device's non-PCI registers may yield garbage 2128 * results. 2129 */ 2130 for (i = 0; i < BGE_TIMEOUT; i++) { 2131 if (pci_read_config(dev, BGE_PCI_PCISTATE, 4) == pcistate) 2132 break; 2133 DELAY(10); 2134 } 2135 2136 if (sc->bge_flags & BGE_FLAG_PCIE) { 2137 reset = bge_readmem_ind(sc, 0x7c00); 2138 bge_writemem_ind(sc, 0x7c00, reset | (1 << 25)); 2139 } 2140 2141 /* Fix up byte swapping */ 2142 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS | 2143 BGE_MODECTL_BYTESWAP_DATA); 2144 2145 CSR_WRITE_4(sc, BGE_MAC_MODE, 0); 2146 2147 /* 2148 * The 5704 in TBI mode apparently needs some special 2149 * adjustment to insure the SERDES drive level is set 2150 * to 1.2V. 2151 */ 2152 if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && 2153 (sc->bge_flags & BGE_FLAG_TBI)) { 2154 uint32_t serdescfg; 2155 2156 serdescfg = CSR_READ_4(sc, BGE_SERDES_CFG); 2157 serdescfg = (serdescfg & ~0xFFF) | 0x880; 2158 CSR_WRITE_4(sc, BGE_SERDES_CFG, serdescfg); 2159 } 2160 2161 /* XXX: Broadcom Linux driver. */ 2162 if ((sc->bge_flags & BGE_FLAG_PCIE) && 2163 sc->bge_chipid != BGE_CHIPID_BCM5750_A0) { 2164 uint32_t v; 2165 2166 v = CSR_READ_4(sc, 0x7c00); 2167 CSR_WRITE_4(sc, 0x7c00, v | (1<<25)); 2168 } 2169 2170 DELAY(10000); 2171 } 2172 2173 /* 2174 * Frame reception handling. This is called if there's a frame 2175 * on the receive return list. 2176 * 2177 * Note: we have to be able to handle two possibilities here: 2178 * 1) the frame is from the jumbo recieve ring 2179 * 2) the frame is from the standard receive ring 2180 */ 2181 2182 static void 2183 bge_rxeof(struct bge_softc *sc) 2184 { 2185 struct ifnet *ifp; 2186 int stdcnt = 0, jumbocnt = 0; 2187 2188 if (sc->bge_rx_saved_considx == 2189 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx) 2190 return; 2191 2192 ifp = &sc->arpcom.ac_if; 2193 2194 bus_dmamap_sync(sc->bge_cdata.bge_rx_return_ring_tag, 2195 sc->bge_cdata.bge_rx_return_ring_map, 2196 BUS_DMASYNC_POSTREAD); 2197 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 2198 sc->bge_cdata.bge_rx_std_ring_map, 2199 BUS_DMASYNC_POSTREAD); 2200 if (BGE_IS_JUMBO_CAPABLE(sc)) { 2201 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2202 sc->bge_cdata.bge_rx_jumbo_ring_map, 2203 BUS_DMASYNC_POSTREAD); 2204 } 2205 2206 while (sc->bge_rx_saved_considx != 2207 sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx) { 2208 struct bge_rx_bd *cur_rx; 2209 uint32_t rxidx; 2210 struct mbuf *m = NULL; 2211 uint16_t vlan_tag = 0; 2212 int have_tag = 0; 2213 2214 cur_rx = 2215 &sc->bge_ldata.bge_rx_return_ring[sc->bge_rx_saved_considx]; 2216 2217 rxidx = cur_rx->bge_idx; 2218 BGE_INC(sc->bge_rx_saved_considx, sc->bge_return_ring_cnt); 2219 logif(rx_pkt); 2220 2221 if (cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) { 2222 have_tag = 1; 2223 vlan_tag = cur_rx->bge_vlan_tag; 2224 } 2225 2226 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) { 2227 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT); 2228 m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx]; 2229 sc->bge_cdata.bge_rx_jumbo_chain[rxidx] = NULL; 2230 jumbocnt++; 2231 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 2232 ifp->if_ierrors++; 2233 bge_newbuf_jumbo(sc, sc->bge_jumbo, m); 2234 continue; 2235 } 2236 if (bge_newbuf_jumbo(sc, 2237 sc->bge_jumbo, NULL) == ENOBUFS) { 2238 ifp->if_ierrors++; 2239 bge_newbuf_jumbo(sc, sc->bge_jumbo, m); 2240 continue; 2241 } 2242 } else { 2243 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT); 2244 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 2245 sc->bge_cdata.bge_rx_std_dmamap[rxidx], 2246 BUS_DMASYNC_POSTREAD); 2247 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 2248 sc->bge_cdata.bge_rx_std_dmamap[rxidx]); 2249 m = sc->bge_cdata.bge_rx_std_chain[rxidx]; 2250 sc->bge_cdata.bge_rx_std_chain[rxidx] = NULL; 2251 stdcnt++; 2252 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) { 2253 ifp->if_ierrors++; 2254 bge_newbuf_std(sc, sc->bge_std, m); 2255 continue; 2256 } 2257 if (bge_newbuf_std(sc, sc->bge_std, 2258 NULL) == ENOBUFS) { 2259 ifp->if_ierrors++; 2260 bge_newbuf_std(sc, sc->bge_std, m); 2261 continue; 2262 } 2263 } 2264 2265 ifp->if_ipackets++; 2266 #ifndef __i386__ 2267 /* 2268 * The i386 allows unaligned accesses, but for other 2269 * platforms we must make sure the payload is aligned. 2270 */ 2271 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) { 2272 bcopy(m->m_data, m->m_data + ETHER_ALIGN, 2273 cur_rx->bge_len); 2274 m->m_data += ETHER_ALIGN; 2275 } 2276 #endif 2277 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN; 2278 m->m_pkthdr.rcvif = ifp; 2279 2280 if (ifp->if_capenable & IFCAP_RXCSUM) { 2281 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) { 2282 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 2283 if ((cur_rx->bge_ip_csum ^ 0xffff) == 0) 2284 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 2285 } 2286 if ((cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) && 2287 m->m_pkthdr.len >= BGE_MIN_FRAME) { 2288 m->m_pkthdr.csum_data = 2289 cur_rx->bge_tcp_udp_csum; 2290 m->m_pkthdr.csum_flags |= 2291 CSUM_DATA_VALID | CSUM_PSEUDO_HDR; 2292 } 2293 } 2294 2295 /* 2296 * If we received a packet with a vlan tag, pass it 2297 * to vlan_input() instead of ether_input(). 2298 */ 2299 if (have_tag) { 2300 VLAN_INPUT_TAG(m, vlan_tag); 2301 have_tag = vlan_tag = 0; 2302 } else { 2303 ifp->if_input(ifp, m); 2304 } 2305 } 2306 2307 if (stdcnt > 0) { 2308 bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag, 2309 sc->bge_cdata.bge_rx_std_ring_map, 2310 BUS_DMASYNC_PREWRITE); 2311 } 2312 2313 if (BGE_IS_JUMBO_CAPABLE(sc) && jumbocnt > 0) { 2314 bus_dmamap_sync(sc->bge_cdata.bge_rx_jumbo_ring_tag, 2315 sc->bge_cdata.bge_rx_jumbo_ring_map, 2316 BUS_DMASYNC_PREWRITE); 2317 } 2318 2319 CSR_WRITE_4(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx); 2320 if (stdcnt) 2321 CSR_WRITE_4(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std); 2322 if (jumbocnt) 2323 CSR_WRITE_4(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo); 2324 } 2325 2326 static void 2327 bge_txeof(struct bge_softc *sc) 2328 { 2329 struct bge_tx_bd *cur_tx = NULL; 2330 struct ifnet *ifp; 2331 2332 if (sc->bge_tx_saved_considx == 2333 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx) 2334 return; 2335 2336 ifp = &sc->arpcom.ac_if; 2337 2338 bus_dmamap_sync(sc->bge_cdata.bge_tx_ring_tag, 2339 sc->bge_cdata.bge_tx_ring_map, 2340 BUS_DMASYNC_POSTREAD); 2341 2342 /* 2343 * Go through our tx ring and free mbufs for those 2344 * frames that have been sent. 2345 */ 2346 while (sc->bge_tx_saved_considx != 2347 sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx) { 2348 uint32_t idx = 0; 2349 2350 idx = sc->bge_tx_saved_considx; 2351 cur_tx = &sc->bge_ldata.bge_tx_ring[idx]; 2352 if (cur_tx->bge_flags & BGE_TXBDFLAG_END) 2353 ifp->if_opackets++; 2354 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) { 2355 bus_dmamap_sync(sc->bge_cdata.bge_mtag, 2356 sc->bge_cdata.bge_tx_dmamap[idx], 2357 BUS_DMASYNC_POSTWRITE); 2358 bus_dmamap_unload(sc->bge_cdata.bge_mtag, 2359 sc->bge_cdata.bge_tx_dmamap[idx]); 2360 m_freem(sc->bge_cdata.bge_tx_chain[idx]); 2361 sc->bge_cdata.bge_tx_chain[idx] = NULL; 2362 } 2363 sc->bge_txcnt--; 2364 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT); 2365 logif(tx_pkt); 2366 } 2367 2368 if (cur_tx != NULL && 2369 (BGE_TX_RING_CNT - sc->bge_txcnt) >= 2370 (BGE_NSEG_RSVD + BGE_NSEG_SPARE)) 2371 ifp->if_flags &= ~IFF_OACTIVE; 2372 2373 if (sc->bge_txcnt == 0) 2374 ifp->if_timer = 0; 2375 2376 if (!ifq_is_empty(&ifp->if_snd)) 2377 ifp->if_start(ifp); 2378 } 2379 2380 #ifdef DEVICE_POLLING 2381 2382 static void 2383 bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 2384 { 2385 struct bge_softc *sc = ifp->if_softc; 2386 uint32_t status; 2387 2388 switch(cmd) { 2389 case POLL_REGISTER: 2390 bge_disable_intr(sc); 2391 break; 2392 case POLL_DEREGISTER: 2393 bge_enable_intr(sc); 2394 break; 2395 case POLL_AND_CHECK_STATUS: 2396 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 2397 sc->bge_cdata.bge_status_map, 2398 BUS_DMASYNC_POSTREAD); 2399 2400 /* 2401 * Process link state changes. 2402 */ 2403 status = CSR_READ_4(sc, BGE_MAC_STS); 2404 if ((status & sc->bge_link_chg) || sc->bge_link_evt) { 2405 sc->bge_link_evt = 0; 2406 sc->bge_link_upd(sc, status); 2407 } 2408 /* fall through */ 2409 case POLL_ONLY: 2410 if (ifp->if_flags & IFF_RUNNING) { 2411 bge_rxeof(sc); 2412 bge_txeof(sc); 2413 } 2414 break; 2415 } 2416 } 2417 2418 #endif 2419 2420 static void 2421 bge_intr(void *xsc) 2422 { 2423 struct bge_softc *sc = xsc; 2424 struct ifnet *ifp = &sc->arpcom.ac_if; 2425 uint32_t status; 2426 2427 logif(intr); 2428 2429 /* 2430 * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO. Don't 2431 * disable interrupts by writing nonzero like we used to, since with 2432 * our current organization this just gives complications and 2433 * pessimizations for re-enabling interrupts. We used to have races 2434 * instead of the necessary complications. Disabling interrupts 2435 * would just reduce the chance of a status update while we are 2436 * running (by switching to the interrupt-mode coalescence 2437 * parameters), but this chance is already very low so it is more 2438 * efficient to get another interrupt than prevent it. 2439 * 2440 * We do the ack first to ensure another interrupt if there is a 2441 * status update after the ack. We don't check for the status 2442 * changing later because it is more efficient to get another 2443 * interrupt than prevent it, not quite as above (not checking is 2444 * a smaller optimization than not toggling the interrupt enable, 2445 * since checking doesn't involve PCI accesses and toggling require 2446 * the status check). So toggling would probably be a pessimization 2447 * even with MSI. It would only be needed for using a task queue. 2448 */ 2449 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 0); 2450 2451 bus_dmamap_sync(sc->bge_cdata.bge_status_tag, 2452 sc->bge_cdata.bge_status_map, 2453 BUS_DMASYNC_POSTREAD); 2454 2455 /* 2456 * Process link state changes. 2457 */ 2458 status = CSR_READ_4(sc, BGE_MAC_STS); 2459 if ((status & sc->bge_link_chg) || sc->bge_link_evt) { 2460 sc->bge_link_evt = 0; 2461 sc->bge_link_upd(sc, status); 2462 } 2463 2464 if (ifp->if_flags & IFF_RUNNING) { 2465 /* Check RX return ring producer/consumer */ 2466 bge_rxeof(sc); 2467 2468 /* Check TX ring producer/consumer */ 2469 bge_txeof(sc); 2470 } 2471 2472 if (sc->bge_coal_chg) 2473 bge_coal_change(sc); 2474 } 2475 2476 static void 2477 bge_tick(void *xsc) 2478 { 2479 struct bge_softc *sc = xsc; 2480 struct ifnet *ifp = &sc->arpcom.ac_if; 2481 2482 lwkt_serialize_enter(ifp->if_serializer); 2483 2484 if (BGE_IS_5705_PLUS(sc)) 2485 bge_stats_update_regs(sc); 2486 else 2487 bge_stats_update(sc); 2488 2489 if (sc->bge_flags & BGE_FLAG_TBI) { 2490 /* 2491 * Since in TBI mode auto-polling can't be used we should poll 2492 * link status manually. Here we register pending link event 2493 * and trigger interrupt. 2494 */ 2495 sc->bge_link_evt++; 2496 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 2497 } else if (!sc->bge_link) { 2498 mii_tick(device_get_softc(sc->bge_miibus)); 2499 } 2500 2501 callout_reset(&sc->bge_stat_timer, hz, bge_tick, sc); 2502 2503 lwkt_serialize_exit(ifp->if_serializer); 2504 } 2505 2506 static void 2507 bge_stats_update_regs(struct bge_softc *sc) 2508 { 2509 struct ifnet *ifp = &sc->arpcom.ac_if; 2510 struct bge_mac_stats_regs stats; 2511 uint32_t *s; 2512 int i; 2513 2514 s = (uint32_t *)&stats; 2515 for (i = 0; i < sizeof(struct bge_mac_stats_regs); i += 4) { 2516 *s = CSR_READ_4(sc, BGE_RX_STATS + i); 2517 s++; 2518 } 2519 2520 ifp->if_collisions += 2521 (stats.dot3StatsSingleCollisionFrames + 2522 stats.dot3StatsMultipleCollisionFrames + 2523 stats.dot3StatsExcessiveCollisions + 2524 stats.dot3StatsLateCollisions) - 2525 ifp->if_collisions; 2526 } 2527 2528 static void 2529 bge_stats_update(struct bge_softc *sc) 2530 { 2531 struct ifnet *ifp = &sc->arpcom.ac_if; 2532 bus_size_t stats; 2533 2534 stats = BGE_MEMWIN_START + BGE_STATS_BLOCK; 2535 2536 #define READ_STAT(sc, stats, stat) \ 2537 CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat)) 2538 2539 ifp->if_collisions += 2540 (READ_STAT(sc, stats, 2541 txstats.dot3StatsSingleCollisionFrames.bge_addr_lo) + 2542 READ_STAT(sc, stats, 2543 txstats.dot3StatsMultipleCollisionFrames.bge_addr_lo) + 2544 READ_STAT(sc, stats, 2545 txstats.dot3StatsExcessiveCollisions.bge_addr_lo) + 2546 READ_STAT(sc, stats, 2547 txstats.dot3StatsLateCollisions.bge_addr_lo)) - 2548 ifp->if_collisions; 2549 2550 #undef READ_STAT 2551 2552 #ifdef notdef 2553 ifp->if_collisions += 2554 (sc->bge_rdata->bge_info.bge_stats.dot3StatsSingleCollisionFrames + 2555 sc->bge_rdata->bge_info.bge_stats.dot3StatsMultipleCollisionFrames + 2556 sc->bge_rdata->bge_info.bge_stats.dot3StatsExcessiveCollisions + 2557 sc->bge_rdata->bge_info.bge_stats.dot3StatsLateCollisions) - 2558 ifp->if_collisions; 2559 #endif 2560 } 2561 2562 /* 2563 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data 2564 * pointers to descriptors. 2565 */ 2566 static int 2567 bge_encap(struct bge_softc *sc, struct mbuf **m_head0, uint32_t *txidx) 2568 { 2569 struct bge_tx_bd *d = NULL; 2570 uint16_t csum_flags = 0; 2571 struct ifvlan *ifv = NULL; 2572 struct bge_dmamap_arg ctx; 2573 bus_dma_segment_t segs[BGE_NSEG_NEW]; 2574 bus_dmamap_t map; 2575 int error, maxsegs, idx, i; 2576 struct mbuf *m_head = *m_head0; 2577 2578 if ((m_head->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) && 2579 m_head->m_pkthdr.rcvif != NULL && 2580 m_head->m_pkthdr.rcvif->if_type == IFT_L2VLAN) 2581 ifv = m_head->m_pkthdr.rcvif->if_softc; 2582 2583 if (m_head->m_pkthdr.csum_flags) { 2584 if (m_head->m_pkthdr.csum_flags & CSUM_IP) 2585 csum_flags |= BGE_TXBDFLAG_IP_CSUM; 2586 if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) 2587 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM; 2588 if (m_head->m_flags & M_LASTFRAG) 2589 csum_flags |= BGE_TXBDFLAG_IP_FRAG_END; 2590 else if (m_head->m_flags & M_FRAG) 2591 csum_flags |= BGE_TXBDFLAG_IP_FRAG; 2592 } 2593 2594 idx = *txidx; 2595 map = sc->bge_cdata.bge_tx_dmamap[idx]; 2596 2597 maxsegs = (BGE_TX_RING_CNT - sc->bge_txcnt) - BGE_NSEG_RSVD; 2598 KASSERT(maxsegs >= BGE_NSEG_SPARE, 2599 ("not enough segments %d\n", maxsegs)); 2600 2601 if (maxsegs > BGE_NSEG_NEW) 2602 maxsegs = BGE_NSEG_NEW; 2603 2604 /* 2605 * Pad outbound frame to BGE_MIN_FRAME for an unusual reason. 2606 * The bge hardware will pad out Tx runts to BGE_MIN_FRAME, 2607 * but when such padded frames employ the bge IP/TCP checksum 2608 * offload, the hardware checksum assist gives incorrect results 2609 * (possibly from incorporating its own padding into the UDP/TCP 2610 * checksum; who knows). If we pad such runts with zeros, the 2611 * onboard checksum comes out correct. We do this by pretending 2612 * the mbuf chain has too many fragments so the coalescing code 2613 * below can assemble the packet into a single buffer that's 2614 * padded out to the mininum frame size. 2615 */ 2616 if ((csum_flags & BGE_TXBDFLAG_TCP_UDP_CSUM) && 2617 m_head->m_pkthdr.len < BGE_MIN_FRAME) { 2618 error = EFBIG; 2619 } else { 2620 ctx.bge_segs = segs; 2621 ctx.bge_maxsegs = maxsegs; 2622 error = bus_dmamap_load_mbuf(sc->bge_cdata.bge_mtag, map, 2623 m_head, bge_dma_map_mbuf, &ctx, 2624 BUS_DMA_NOWAIT); 2625 } 2626 if (error == EFBIG || ctx.bge_maxsegs == 0) { 2627 struct mbuf *m_new; 2628 2629 m_new = m_defrag(m_head, MB_DONTWAIT); 2630 if (m_new == NULL) { 2631 if_printf(&sc->arpcom.ac_if, 2632 "could not defrag TX mbuf\n"); 2633 error = ENOBUFS; 2634 goto back; 2635 } else { 2636 m_head = m_new; 2637 *m_head0 = m_head; 2638 } 2639 2640 /* 2641 * Manually pad short frames, and zero the pad space 2642 * to avoid leaking data. 2643 */ 2644 if ((csum_flags & BGE_TXBDFLAG_TCP_UDP_CSUM) && 2645 m_head->m_pkthdr.len < BGE_MIN_FRAME) { 2646 int pad_len = BGE_MIN_FRAME - m_head->m_pkthdr.len; 2647 2648 bzero(mtod(m_head, char *) + m_head->m_pkthdr.len, 2649 pad_len); 2650 m_head->m_pkthdr.len += pad_len; 2651 m_head->m_len = m_head->m_pkthdr.len; 2652 } 2653 2654 ctx.bge_segs = segs; 2655 ctx.bge_maxsegs = maxsegs; 2656 error = bus_dmamap_load_mbuf(sc->bge_cdata.bge_mtag, map, 2657 m_head, bge_dma_map_mbuf, &ctx, 2658 BUS_DMA_NOWAIT); 2659 if (error || ctx.bge_maxsegs == 0) { 2660 if_printf(&sc->arpcom.ac_if, 2661 "could not defrag TX mbuf\n"); 2662 if (error == 0) 2663 error = EFBIG; 2664 goto back; 2665 } 2666 } else if (error) { 2667 if_printf(&sc->arpcom.ac_if, "could not map TX mbuf\n"); 2668 goto back; 2669 } 2670 2671 bus_dmamap_sync(sc->bge_cdata.bge_mtag, map, BUS_DMASYNC_PREWRITE); 2672 2673 for (i = 0; ; i++) { 2674 d = &sc->bge_ldata.bge_tx_ring[idx]; 2675 2676 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(ctx.bge_segs[i].ds_addr); 2677 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(ctx.bge_segs[i].ds_addr); 2678 d->bge_len = segs[i].ds_len; 2679 d->bge_flags = csum_flags; 2680 2681 if (i == ctx.bge_maxsegs - 1) 2682 break; 2683 BGE_INC(idx, BGE_TX_RING_CNT); 2684 } 2685 /* Mark the last segment as end of packet... */ 2686 d->bge_flags |= BGE_TXBDFLAG_END; 2687 2688 /* Set vlan tag to the first segment of the packet. */ 2689 d = &sc->bge_ldata.bge_tx_ring[*txidx]; 2690 if (ifv != NULL) { 2691 d->bge_flags |= BGE_TXBDFLAG_VLAN_TAG; 2692 d->bge_vlan_tag = ifv->ifv_tag; 2693 } else { 2694 d->bge_vlan_tag = 0; 2695 } 2696 2697 /* 2698 * Insure that the map for this transmission is placed at 2699 * the array index of the last descriptor in this chain. 2700 */ 2701 sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx]; 2702 sc->bge_cdata.bge_tx_dmamap[idx] = map; 2703 sc->bge_cdata.bge_tx_chain[idx] = m_head; 2704 sc->bge_txcnt += ctx.bge_maxsegs; 2705 2706 BGE_INC(idx, BGE_TX_RING_CNT); 2707 *txidx = idx; 2708 back: 2709 if (error) { 2710 m_freem(m_head); 2711 *m_head0 = NULL; 2712 } 2713 return error; 2714 } 2715 2716 /* 2717 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 2718 * to the mbuf data regions directly in the transmit descriptors. 2719 */ 2720 static void 2721 bge_start(struct ifnet *ifp) 2722 { 2723 struct bge_softc *sc = ifp->if_softc; 2724 struct mbuf *m_head = NULL; 2725 uint32_t prodidx; 2726 int need_trans; 2727 2728 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 2729 return; 2730 2731 prodidx = sc->bge_tx_prodidx; 2732 2733 need_trans = 0; 2734 while (sc->bge_cdata.bge_tx_chain[prodidx] == NULL) { 2735 m_head = ifq_poll(&ifp->if_snd); 2736 if (m_head == NULL) 2737 break; 2738 2739 /* 2740 * XXX 2741 * The code inside the if() block is never reached since we 2742 * must mark CSUM_IP_FRAGS in our if_hwassist to start getting 2743 * requests to checksum TCP/UDP in a fragmented packet. 2744 * 2745 * XXX 2746 * safety overkill. If this is a fragmented packet chain 2747 * with delayed TCP/UDP checksums, then only encapsulate 2748 * it if we have enough descriptors to handle the entire 2749 * chain at once. 2750 * (paranoia -- may not actually be needed) 2751 */ 2752 if (m_head->m_flags & M_FIRSTFRAG && 2753 m_head->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) { 2754 if ((BGE_TX_RING_CNT - sc->bge_txcnt) < 2755 m_head->m_pkthdr.csum_data + 16) { 2756 ifp->if_flags |= IFF_OACTIVE; 2757 break; 2758 } 2759 } 2760 2761 /* 2762 * Sanity check: avoid coming within BGE_NSEG_RSVD 2763 * descriptors of the end of the ring. Also make 2764 * sure there are BGE_NSEG_SPARE descriptors for 2765 * jumbo buffers' defragmentation. 2766 */ 2767 if ((BGE_TX_RING_CNT - sc->bge_txcnt) < 2768 (BGE_NSEG_RSVD + BGE_NSEG_SPARE)) { 2769 ifp->if_flags |= IFF_OACTIVE; 2770 break; 2771 } 2772 2773 /* 2774 * Dequeue the packet before encapsulation, since 2775 * bge_encap() may free the packet if error happens. 2776 */ 2777 ifq_dequeue(&ifp->if_snd, m_head); 2778 2779 /* 2780 * Pack the data into the transmit ring. If we 2781 * don't have room, set the OACTIVE flag and wait 2782 * for the NIC to drain the ring. 2783 */ 2784 if (bge_encap(sc, &m_head, &prodidx)) { 2785 ifp->if_flags |= IFF_OACTIVE; 2786 break; 2787 } 2788 need_trans = 1; 2789 2790 BPF_MTAP(ifp, m_head); 2791 } 2792 2793 if (!need_trans) 2794 return; 2795 2796 /* Transmit */ 2797 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 2798 /* 5700 b2 errata */ 2799 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX) 2800 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx); 2801 2802 sc->bge_tx_prodidx = prodidx; 2803 2804 /* 2805 * Set a timeout in case the chip goes out to lunch. 2806 */ 2807 ifp->if_timer = 5; 2808 } 2809 2810 static void 2811 bge_init(void *xsc) 2812 { 2813 struct bge_softc *sc = xsc; 2814 struct ifnet *ifp = &sc->arpcom.ac_if; 2815 uint16_t *m; 2816 2817 ASSERT_SERIALIZED(ifp->if_serializer); 2818 2819 if (ifp->if_flags & IFF_RUNNING) 2820 return; 2821 2822 /* Cancel pending I/O and flush buffers. */ 2823 bge_stop(sc); 2824 bge_reset(sc); 2825 bge_chipinit(sc); 2826 2827 /* 2828 * Init the various state machines, ring 2829 * control blocks and firmware. 2830 */ 2831 if (bge_blockinit(sc)) { 2832 if_printf(ifp, "initialization failure\n"); 2833 return; 2834 } 2835 2836 /* Specify MTU. */ 2837 CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu + 2838 ETHER_HDR_LEN + ETHER_CRC_LEN + EVL_ENCAPLEN); 2839 2840 /* Load our MAC address. */ 2841 m = (uint16_t *)&sc->arpcom.ac_enaddr[0]; 2842 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0])); 2843 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2])); 2844 2845 /* Enable or disable promiscuous mode as needed. */ 2846 bge_setpromisc(sc); 2847 2848 /* Program multicast filter. */ 2849 bge_setmulti(sc); 2850 2851 /* Init RX ring. */ 2852 bge_init_rx_ring_std(sc); 2853 2854 /* 2855 * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's 2856 * memory to insure that the chip has in fact read the first 2857 * entry of the ring. 2858 */ 2859 if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) { 2860 uint32_t v, i; 2861 for (i = 0; i < 10; i++) { 2862 DELAY(20); 2863 v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8); 2864 if (v == (MCLBYTES - ETHER_ALIGN)) 2865 break; 2866 } 2867 if (i == 10) 2868 if_printf(ifp, "5705 A0 chip failed to load RX ring\n"); 2869 } 2870 2871 /* Init jumbo RX ring. */ 2872 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN)) 2873 bge_init_rx_ring_jumbo(sc); 2874 2875 /* Init our RX return ring index */ 2876 sc->bge_rx_saved_considx = 0; 2877 2878 /* Init TX ring. */ 2879 bge_init_tx_ring(sc); 2880 2881 /* Turn on transmitter */ 2882 BGE_SETBIT(sc, BGE_TX_MODE, BGE_TXMODE_ENABLE); 2883 2884 /* Turn on receiver */ 2885 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 2886 2887 /* Tell firmware we're alive. */ 2888 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 2889 2890 /* Enable host interrupts if polling(4) is not enabled. */ 2891 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA); 2892 #ifdef DEVICE_POLLING 2893 if (ifp->if_flags & IFF_POLLING) 2894 bge_disable_intr(sc); 2895 else 2896 #endif 2897 bge_enable_intr(sc); 2898 2899 bge_ifmedia_upd(ifp); 2900 2901 ifp->if_flags |= IFF_RUNNING; 2902 ifp->if_flags &= ~IFF_OACTIVE; 2903 2904 callout_reset(&sc->bge_stat_timer, hz, bge_tick, sc); 2905 } 2906 2907 /* 2908 * Set media options. 2909 */ 2910 static int 2911 bge_ifmedia_upd(struct ifnet *ifp) 2912 { 2913 struct bge_softc *sc = ifp->if_softc; 2914 2915 /* If this is a 1000baseX NIC, enable the TBI port. */ 2916 if (sc->bge_flags & BGE_FLAG_TBI) { 2917 struct ifmedia *ifm = &sc->bge_ifmedia; 2918 2919 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) 2920 return(EINVAL); 2921 2922 switch(IFM_SUBTYPE(ifm->ifm_media)) { 2923 case IFM_AUTO: 2924 /* 2925 * The BCM5704 ASIC appears to have a special 2926 * mechanism for programming the autoneg 2927 * advertisement registers in TBI mode. 2928 */ 2929 if (!bge_fake_autoneg && 2930 sc->bge_asicrev == BGE_ASICREV_BCM5704) { 2931 uint32_t sgdig; 2932 2933 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0); 2934 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG); 2935 sgdig |= BGE_SGDIGCFG_AUTO | 2936 BGE_SGDIGCFG_PAUSE_CAP | 2937 BGE_SGDIGCFG_ASYM_PAUSE; 2938 CSR_WRITE_4(sc, BGE_SGDIG_CFG, 2939 sgdig | BGE_SGDIGCFG_SEND); 2940 DELAY(5); 2941 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig); 2942 } 2943 break; 2944 case IFM_1000_SX: 2945 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) { 2946 BGE_CLRBIT(sc, BGE_MAC_MODE, 2947 BGE_MACMODE_HALF_DUPLEX); 2948 } else { 2949 BGE_SETBIT(sc, BGE_MAC_MODE, 2950 BGE_MACMODE_HALF_DUPLEX); 2951 } 2952 break; 2953 default: 2954 return(EINVAL); 2955 } 2956 } else { 2957 struct mii_data *mii = device_get_softc(sc->bge_miibus); 2958 2959 sc->bge_link_evt++; 2960 sc->bge_link = 0; 2961 if (mii->mii_instance) { 2962 struct mii_softc *miisc; 2963 2964 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 2965 mii_phy_reset(miisc); 2966 } 2967 mii_mediachg(mii); 2968 } 2969 return(0); 2970 } 2971 2972 /* 2973 * Report current media status. 2974 */ 2975 static void 2976 bge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 2977 { 2978 struct bge_softc *sc = ifp->if_softc; 2979 2980 if (sc->bge_flags & BGE_FLAG_TBI) { 2981 ifmr->ifm_status = IFM_AVALID; 2982 ifmr->ifm_active = IFM_ETHER; 2983 if (CSR_READ_4(sc, BGE_MAC_STS) & 2984 BGE_MACSTAT_TBI_PCS_SYNCHED) { 2985 ifmr->ifm_status |= IFM_ACTIVE; 2986 } else { 2987 ifmr->ifm_active |= IFM_NONE; 2988 return; 2989 } 2990 2991 ifmr->ifm_active |= IFM_1000_SX; 2992 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX) 2993 ifmr->ifm_active |= IFM_HDX; 2994 else 2995 ifmr->ifm_active |= IFM_FDX; 2996 } else { 2997 struct mii_data *mii = device_get_softc(sc->bge_miibus); 2998 2999 mii_pollstat(mii); 3000 ifmr->ifm_active = mii->mii_media_active; 3001 ifmr->ifm_status = mii->mii_media_status; 3002 } 3003 } 3004 3005 static int 3006 bge_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 3007 { 3008 struct bge_softc *sc = ifp->if_softc; 3009 struct ifreq *ifr = (struct ifreq *)data; 3010 int mask, error = 0; 3011 3012 ASSERT_SERIALIZED(ifp->if_serializer); 3013 3014 switch (command) { 3015 case SIOCSIFMTU: 3016 if ((!BGE_IS_JUMBO_CAPABLE(sc) && ifr->ifr_mtu > ETHERMTU) || 3017 (BGE_IS_JUMBO_CAPABLE(sc) && 3018 ifr->ifr_mtu > BGE_JUMBO_MTU)) { 3019 error = EINVAL; 3020 } else if (ifp->if_mtu != ifr->ifr_mtu) { 3021 ifp->if_mtu = ifr->ifr_mtu; 3022 ifp->if_flags &= ~IFF_RUNNING; 3023 bge_init(sc); 3024 } 3025 break; 3026 case SIOCSIFFLAGS: 3027 if (ifp->if_flags & IFF_UP) { 3028 if (ifp->if_flags & IFF_RUNNING) { 3029 mask = ifp->if_flags ^ sc->bge_if_flags; 3030 3031 /* 3032 * If only the state of the PROMISC flag 3033 * changed, then just use the 'set promisc 3034 * mode' command instead of reinitializing 3035 * the entire NIC. Doing a full re-init 3036 * means reloading the firmware and waiting 3037 * for it to start up, which may take a 3038 * second or two. Similarly for ALLMULTI. 3039 */ 3040 if (mask & IFF_PROMISC) 3041 bge_setpromisc(sc); 3042 if (mask & IFF_ALLMULTI) 3043 bge_setmulti(sc); 3044 } else { 3045 bge_init(sc); 3046 } 3047 } else { 3048 if (ifp->if_flags & IFF_RUNNING) 3049 bge_stop(sc); 3050 } 3051 sc->bge_if_flags = ifp->if_flags; 3052 break; 3053 case SIOCADDMULTI: 3054 case SIOCDELMULTI: 3055 if (ifp->if_flags & IFF_RUNNING) 3056 bge_setmulti(sc); 3057 break; 3058 case SIOCSIFMEDIA: 3059 case SIOCGIFMEDIA: 3060 if (sc->bge_flags & BGE_FLAG_TBI) { 3061 error = ifmedia_ioctl(ifp, ifr, 3062 &sc->bge_ifmedia, command); 3063 } else { 3064 struct mii_data *mii; 3065 3066 mii = device_get_softc(sc->bge_miibus); 3067 error = ifmedia_ioctl(ifp, ifr, 3068 &mii->mii_media, command); 3069 } 3070 break; 3071 case SIOCSIFCAP: 3072 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 3073 if (mask & IFCAP_HWCSUM) { 3074 ifp->if_capenable ^= IFCAP_HWCSUM; 3075 if (IFCAP_HWCSUM & ifp->if_capenable) 3076 ifp->if_hwassist = BGE_CSUM_FEATURES; 3077 else 3078 ifp->if_hwassist = 0; 3079 } 3080 break; 3081 default: 3082 error = ether_ioctl(ifp, command, data); 3083 break; 3084 } 3085 return error; 3086 } 3087 3088 static void 3089 bge_watchdog(struct ifnet *ifp) 3090 { 3091 struct bge_softc *sc = ifp->if_softc; 3092 3093 if_printf(ifp, "watchdog timeout -- resetting\n"); 3094 3095 ifp->if_flags &= ~IFF_RUNNING; 3096 bge_init(sc); 3097 3098 ifp->if_oerrors++; 3099 3100 if (!ifq_is_empty(&ifp->if_snd)) 3101 ifp->if_start(ifp); 3102 } 3103 3104 /* 3105 * Stop the adapter and free any mbufs allocated to the 3106 * RX and TX lists. 3107 */ 3108 static void 3109 bge_stop(struct bge_softc *sc) 3110 { 3111 struct ifnet *ifp = &sc->arpcom.ac_if; 3112 struct ifmedia_entry *ifm; 3113 struct mii_data *mii = NULL; 3114 int mtmp, itmp; 3115 3116 ASSERT_SERIALIZED(ifp->if_serializer); 3117 3118 if ((sc->bge_flags & BGE_FLAG_TBI) == 0) 3119 mii = device_get_softc(sc->bge_miibus); 3120 3121 callout_stop(&sc->bge_stat_timer); 3122 3123 /* 3124 * Disable all of the receiver blocks 3125 */ 3126 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE); 3127 BGE_CLRBIT(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE); 3128 BGE_CLRBIT(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE); 3129 if (!BGE_IS_5705_PLUS(sc)) 3130 BGE_CLRBIT(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE); 3131 BGE_CLRBIT(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE); 3132 BGE_CLRBIT(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE); 3133 BGE_CLRBIT(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE); 3134 3135 /* 3136 * Disable all of the transmit blocks 3137 */ 3138 BGE_CLRBIT(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE); 3139 BGE_CLRBIT(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE); 3140 BGE_CLRBIT(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE); 3141 BGE_CLRBIT(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE); 3142 BGE_CLRBIT(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE); 3143 if (!BGE_IS_5705_PLUS(sc)) 3144 BGE_CLRBIT(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE); 3145 BGE_CLRBIT(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE); 3146 3147 /* 3148 * Shut down all of the memory managers and related 3149 * state machines. 3150 */ 3151 BGE_CLRBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE); 3152 BGE_CLRBIT(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE); 3153 if (!BGE_IS_5705_PLUS(sc)) 3154 BGE_CLRBIT(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE); 3155 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF); 3156 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0); 3157 if (!BGE_IS_5705_PLUS(sc)) { 3158 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE); 3159 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE); 3160 } 3161 3162 /* Disable host interrupts. */ 3163 bge_disable_intr(sc); 3164 3165 /* 3166 * Tell firmware we're shutting down. 3167 */ 3168 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP); 3169 3170 /* Free the RX lists. */ 3171 bge_free_rx_ring_std(sc); 3172 3173 /* Free jumbo RX list. */ 3174 if (BGE_IS_JUMBO_CAPABLE(sc)) 3175 bge_free_rx_ring_jumbo(sc); 3176 3177 /* Free TX buffers. */ 3178 bge_free_tx_ring(sc); 3179 3180 /* 3181 * Isolate/power down the PHY, but leave the media selection 3182 * unchanged so that things will be put back to normal when 3183 * we bring the interface back up. 3184 * 3185 * 'mii' may be NULL in the following cases: 3186 * - The device uses TBI. 3187 * - bge_stop() is called by bge_detach(). 3188 */ 3189 if (mii != NULL) { 3190 itmp = ifp->if_flags; 3191 ifp->if_flags |= IFF_UP; 3192 ifm = mii->mii_media.ifm_cur; 3193 mtmp = ifm->ifm_media; 3194 ifm->ifm_media = IFM_ETHER|IFM_NONE; 3195 mii_mediachg(mii); 3196 ifm->ifm_media = mtmp; 3197 ifp->if_flags = itmp; 3198 } 3199 3200 sc->bge_link = 0; 3201 sc->bge_coal_chg = 0; 3202 3203 sc->bge_tx_saved_considx = BGE_TXCONS_UNSET; 3204 3205 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 3206 ifp->if_timer = 0; 3207 } 3208 3209 /* 3210 * Stop all chip I/O so that the kernel's probe routines don't 3211 * get confused by errant DMAs when rebooting. 3212 */ 3213 static void 3214 bge_shutdown(device_t dev) 3215 { 3216 struct bge_softc *sc = device_get_softc(dev); 3217 struct ifnet *ifp = &sc->arpcom.ac_if; 3218 3219 lwkt_serialize_enter(ifp->if_serializer); 3220 bge_stop(sc); 3221 bge_reset(sc); 3222 lwkt_serialize_exit(ifp->if_serializer); 3223 } 3224 3225 static int 3226 bge_suspend(device_t dev) 3227 { 3228 struct bge_softc *sc = device_get_softc(dev); 3229 struct ifnet *ifp = &sc->arpcom.ac_if; 3230 3231 lwkt_serialize_enter(ifp->if_serializer); 3232 bge_stop(sc); 3233 lwkt_serialize_exit(ifp->if_serializer); 3234 3235 return 0; 3236 } 3237 3238 static int 3239 bge_resume(device_t dev) 3240 { 3241 struct bge_softc *sc = device_get_softc(dev); 3242 struct ifnet *ifp = &sc->arpcom.ac_if; 3243 3244 lwkt_serialize_enter(ifp->if_serializer); 3245 3246 if (ifp->if_flags & IFF_UP) { 3247 bge_init(sc); 3248 3249 if (!ifq_is_empty(&ifp->if_snd)) 3250 ifp->if_start(ifp); 3251 } 3252 3253 lwkt_serialize_exit(ifp->if_serializer); 3254 3255 return 0; 3256 } 3257 3258 static void 3259 bge_setpromisc(struct bge_softc *sc) 3260 { 3261 struct ifnet *ifp = &sc->arpcom.ac_if; 3262 3263 if (ifp->if_flags & IFF_PROMISC) 3264 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 3265 else 3266 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC); 3267 } 3268 3269 static void 3270 bge_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 3271 { 3272 struct bge_dmamap_arg *ctx = arg; 3273 3274 if (error) 3275 return; 3276 3277 KASSERT(nsegs == 1 && ctx->bge_maxsegs == 1, 3278 ("only one segment is allowed\n")); 3279 3280 ctx->bge_segs[0] = *segs; 3281 } 3282 3283 static void 3284 bge_dma_map_mbuf(void *arg, bus_dma_segment_t *segs, int nsegs, 3285 bus_size_t mapsz __unused, int error) 3286 { 3287 struct bge_dmamap_arg *ctx = arg; 3288 int i; 3289 3290 if (error) 3291 return; 3292 3293 if (nsegs > ctx->bge_maxsegs) { 3294 ctx->bge_maxsegs = 0; 3295 return; 3296 } 3297 3298 ctx->bge_maxsegs = nsegs; 3299 for (i = 0; i < nsegs; ++i) 3300 ctx->bge_segs[i] = segs[i]; 3301 } 3302 3303 static void 3304 bge_dma_free(struct bge_softc *sc) 3305 { 3306 int i; 3307 3308 /* Destroy RX/TX mbuf DMA stuffs. */ 3309 if (sc->bge_cdata.bge_mtag != NULL) { 3310 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 3311 if (sc->bge_cdata.bge_rx_std_dmamap[i]) { 3312 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 3313 sc->bge_cdata.bge_rx_std_dmamap[i]); 3314 } 3315 } 3316 3317 for (i = 0; i < BGE_TX_RING_CNT; i++) { 3318 if (sc->bge_cdata.bge_tx_dmamap[i]) { 3319 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 3320 sc->bge_cdata.bge_tx_dmamap[i]); 3321 } 3322 } 3323 bus_dma_tag_destroy(sc->bge_cdata.bge_mtag); 3324 } 3325 3326 /* Destroy standard RX ring */ 3327 bge_dma_block_free(sc->bge_cdata.bge_rx_std_ring_tag, 3328 sc->bge_cdata.bge_rx_std_ring_map, 3329 sc->bge_ldata.bge_rx_std_ring); 3330 3331 if (BGE_IS_JUMBO_CAPABLE(sc)) 3332 bge_free_jumbo_mem(sc); 3333 3334 /* Destroy RX return ring */ 3335 bge_dma_block_free(sc->bge_cdata.bge_rx_return_ring_tag, 3336 sc->bge_cdata.bge_rx_return_ring_map, 3337 sc->bge_ldata.bge_rx_return_ring); 3338 3339 /* Destroy TX ring */ 3340 bge_dma_block_free(sc->bge_cdata.bge_tx_ring_tag, 3341 sc->bge_cdata.bge_tx_ring_map, 3342 sc->bge_ldata.bge_tx_ring); 3343 3344 /* Destroy status block */ 3345 bge_dma_block_free(sc->bge_cdata.bge_status_tag, 3346 sc->bge_cdata.bge_status_map, 3347 sc->bge_ldata.bge_status_block); 3348 3349 /* Destroy statistics block */ 3350 bge_dma_block_free(sc->bge_cdata.bge_stats_tag, 3351 sc->bge_cdata.bge_stats_map, 3352 sc->bge_ldata.bge_stats); 3353 3354 /* Destroy the parent tag */ 3355 if (sc->bge_cdata.bge_parent_tag != NULL) 3356 bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag); 3357 } 3358 3359 static int 3360 bge_dma_alloc(struct bge_softc *sc) 3361 { 3362 struct ifnet *ifp = &sc->arpcom.ac_if; 3363 int nseg, i, error; 3364 3365 /* 3366 * Allocate the parent bus DMA tag appropriate for PCI. 3367 */ 3368 error = bus_dma_tag_create(NULL, 1, 0, 3369 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3370 NULL, NULL, 3371 MAXBSIZE, BGE_NSEG_NEW, 3372 BUS_SPACE_MAXSIZE_32BIT, 3373 0, &sc->bge_cdata.bge_parent_tag); 3374 if (error) { 3375 if_printf(ifp, "could not allocate parent dma tag\n"); 3376 return error; 3377 } 3378 3379 /* 3380 * Create DMA tag for mbufs. 3381 */ 3382 nseg = BGE_NSEG_NEW; 3383 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 0, 3384 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3385 NULL, NULL, 3386 MCLBYTES * nseg, nseg, MCLBYTES, 3387 BUS_DMA_ALLOCNOW, &sc->bge_cdata.bge_mtag); 3388 if (error) { 3389 if_printf(ifp, "could not allocate mbuf dma tag\n"); 3390 return error; 3391 } 3392 3393 /* 3394 * Create DMA maps for TX/RX mbufs. 3395 */ 3396 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) { 3397 error = bus_dmamap_create(sc->bge_cdata.bge_mtag, 0, 3398 &sc->bge_cdata.bge_rx_std_dmamap[i]); 3399 if (error) { 3400 int j; 3401 3402 for (j = 0; j < i; ++j) { 3403 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 3404 sc->bge_cdata.bge_rx_std_dmamap[j]); 3405 } 3406 bus_dma_tag_destroy(sc->bge_cdata.bge_mtag); 3407 sc->bge_cdata.bge_mtag = NULL; 3408 3409 if_printf(ifp, "could not create DMA map for RX\n"); 3410 return error; 3411 } 3412 } 3413 3414 for (i = 0; i < BGE_TX_RING_CNT; i++) { 3415 error = bus_dmamap_create(sc->bge_cdata.bge_mtag, 0, 3416 &sc->bge_cdata.bge_tx_dmamap[i]); 3417 if (error) { 3418 int j; 3419 3420 for (j = 0; j < BGE_STD_RX_RING_CNT; ++j) { 3421 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 3422 sc->bge_cdata.bge_rx_std_dmamap[j]); 3423 } 3424 for (j = 0; j < i; ++j) { 3425 bus_dmamap_destroy(sc->bge_cdata.bge_mtag, 3426 sc->bge_cdata.bge_tx_dmamap[j]); 3427 } 3428 bus_dma_tag_destroy(sc->bge_cdata.bge_mtag); 3429 sc->bge_cdata.bge_mtag = NULL; 3430 3431 if_printf(ifp, "could not create DMA map for TX\n"); 3432 return error; 3433 } 3434 } 3435 3436 /* 3437 * Create DMA stuffs for standard RX ring. 3438 */ 3439 error = bge_dma_block_alloc(sc, BGE_STD_RX_RING_SZ, 3440 &sc->bge_cdata.bge_rx_std_ring_tag, 3441 &sc->bge_cdata.bge_rx_std_ring_map, 3442 (void **)&sc->bge_ldata.bge_rx_std_ring, 3443 &sc->bge_ldata.bge_rx_std_ring_paddr); 3444 if (error) { 3445 if_printf(ifp, "could not create std RX ring\n"); 3446 return error; 3447 } 3448 3449 /* 3450 * Create jumbo buffer pool. 3451 */ 3452 if (BGE_IS_JUMBO_CAPABLE(sc)) { 3453 error = bge_alloc_jumbo_mem(sc); 3454 if (error) { 3455 if_printf(ifp, "could not create jumbo buffer pool\n"); 3456 return error; 3457 } 3458 } 3459 3460 /* 3461 * Create DMA stuffs for RX return ring. 3462 */ 3463 error = bge_dma_block_alloc(sc, BGE_RX_RTN_RING_SZ(sc), 3464 &sc->bge_cdata.bge_rx_return_ring_tag, 3465 &sc->bge_cdata.bge_rx_return_ring_map, 3466 (void **)&sc->bge_ldata.bge_rx_return_ring, 3467 &sc->bge_ldata.bge_rx_return_ring_paddr); 3468 if (error) { 3469 if_printf(ifp, "could not create RX ret ring\n"); 3470 return error; 3471 } 3472 3473 /* 3474 * Create DMA stuffs for TX ring. 3475 */ 3476 error = bge_dma_block_alloc(sc, BGE_TX_RING_SZ, 3477 &sc->bge_cdata.bge_tx_ring_tag, 3478 &sc->bge_cdata.bge_tx_ring_map, 3479 (void **)&sc->bge_ldata.bge_tx_ring, 3480 &sc->bge_ldata.bge_tx_ring_paddr); 3481 if (error) { 3482 if_printf(ifp, "could not create TX ring\n"); 3483 return error; 3484 } 3485 3486 /* 3487 * Create DMA stuffs for status block. 3488 */ 3489 error = bge_dma_block_alloc(sc, BGE_STATUS_BLK_SZ, 3490 &sc->bge_cdata.bge_status_tag, 3491 &sc->bge_cdata.bge_status_map, 3492 (void **)&sc->bge_ldata.bge_status_block, 3493 &sc->bge_ldata.bge_status_block_paddr); 3494 if (error) { 3495 if_printf(ifp, "could not create status block\n"); 3496 return error; 3497 } 3498 3499 /* 3500 * Create DMA stuffs for statistics block. 3501 */ 3502 error = bge_dma_block_alloc(sc, BGE_STATS_SZ, 3503 &sc->bge_cdata.bge_stats_tag, 3504 &sc->bge_cdata.bge_stats_map, 3505 (void **)&sc->bge_ldata.bge_stats, 3506 &sc->bge_ldata.bge_stats_paddr); 3507 if (error) { 3508 if_printf(ifp, "could not create stats block\n"); 3509 return error; 3510 } 3511 return 0; 3512 } 3513 3514 static int 3515 bge_dma_block_alloc(struct bge_softc *sc, bus_size_t size, bus_dma_tag_t *tag, 3516 bus_dmamap_t *map, void **addr, bus_addr_t *paddr) 3517 { 3518 struct ifnet *ifp = &sc->arpcom.ac_if; 3519 struct bge_dmamap_arg ctx; 3520 bus_dma_segment_t seg; 3521 int error; 3522 3523 /* 3524 * Create DMA tag 3525 */ 3526 error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, PAGE_SIZE, 0, 3527 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3528 NULL, NULL, size, 1, size, 0, tag); 3529 if (error) { 3530 if_printf(ifp, "could not allocate dma tag\n"); 3531 return error; 3532 } 3533 3534 /* 3535 * Allocate DMA'able memory 3536 */ 3537 error = bus_dmamem_alloc(*tag, addr, BUS_DMA_WAITOK | BUS_DMA_ZERO, 3538 map); 3539 if (error) { 3540 if_printf(ifp, "could not allocate dma memory\n"); 3541 bus_dma_tag_destroy(*tag); 3542 *tag = NULL; 3543 return error; 3544 } 3545 3546 /* 3547 * Load the DMA'able memory 3548 */ 3549 ctx.bge_maxsegs = 1; 3550 ctx.bge_segs = &seg; 3551 error = bus_dmamap_load(*tag, *map, *addr, size, bge_dma_map_addr, &ctx, 3552 BUS_DMA_WAITOK); 3553 if (error) { 3554 if_printf(ifp, "could not load dma memory\n"); 3555 bus_dmamem_free(*tag, *addr, *map); 3556 bus_dma_tag_destroy(*tag); 3557 *tag = NULL; 3558 return error; 3559 } 3560 *paddr = ctx.bge_segs[0].ds_addr; 3561 3562 return 0; 3563 } 3564 3565 static void 3566 bge_dma_block_free(bus_dma_tag_t tag, bus_dmamap_t map, void *addr) 3567 { 3568 if (tag != NULL) { 3569 bus_dmamap_unload(tag, map); 3570 bus_dmamem_free(tag, addr, map); 3571 bus_dma_tag_destroy(tag); 3572 } 3573 } 3574 3575 /* 3576 * Grrr. The link status word in the status block does 3577 * not work correctly on the BCM5700 rev AX and BX chips, 3578 * according to all available information. Hence, we have 3579 * to enable MII interrupts in order to properly obtain 3580 * async link changes. Unfortunately, this also means that 3581 * we have to read the MAC status register to detect link 3582 * changes, thereby adding an additional register access to 3583 * the interrupt handler. 3584 * 3585 * XXX: perhaps link state detection procedure used for 3586 * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions. 3587 */ 3588 static void 3589 bge_bcm5700_link_upd(struct bge_softc *sc, uint32_t status __unused) 3590 { 3591 struct ifnet *ifp = &sc->arpcom.ac_if; 3592 struct mii_data *mii = device_get_softc(sc->bge_miibus); 3593 3594 mii_pollstat(mii); 3595 3596 if (!sc->bge_link && 3597 (mii->mii_media_status & IFM_ACTIVE) && 3598 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 3599 sc->bge_link++; 3600 if (bootverbose) 3601 if_printf(ifp, "link UP\n"); 3602 } else if (sc->bge_link && 3603 (!(mii->mii_media_status & IFM_ACTIVE) || 3604 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 3605 sc->bge_link = 0; 3606 if (bootverbose) 3607 if_printf(ifp, "link DOWN\n"); 3608 } 3609 3610 /* Clear the interrupt. */ 3611 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_MI_INTERRUPT); 3612 bge_miibus_readreg(sc->bge_dev, 1, BRGPHY_MII_ISR); 3613 bge_miibus_writereg(sc->bge_dev, 1, BRGPHY_MII_IMR, BRGPHY_INTRS); 3614 } 3615 3616 static void 3617 bge_tbi_link_upd(struct bge_softc *sc, uint32_t status) 3618 { 3619 struct ifnet *ifp = &sc->arpcom.ac_if; 3620 3621 #define PCS_ENCODE_ERR (BGE_MACSTAT_PORT_DECODE_ERROR|BGE_MACSTAT_MI_COMPLETE) 3622 3623 /* 3624 * Sometimes PCS encoding errors are detected in 3625 * TBI mode (on fiber NICs), and for some reason 3626 * the chip will signal them as link changes. 3627 * If we get a link change event, but the 'PCS 3628 * encoding error' bit in the MAC status register 3629 * is set, don't bother doing a link check. 3630 * This avoids spurious "gigabit link up" messages 3631 * that sometimes appear on fiber NICs during 3632 * periods of heavy traffic. 3633 */ 3634 if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) { 3635 if (!sc->bge_link) { 3636 sc->bge_link++; 3637 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) { 3638 BGE_CLRBIT(sc, BGE_MAC_MODE, 3639 BGE_MACMODE_TBI_SEND_CFGS); 3640 } 3641 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF); 3642 3643 if (bootverbose) 3644 if_printf(ifp, "link UP\n"); 3645 3646 ifp->if_link_state = LINK_STATE_UP; 3647 if_link_state_change(ifp); 3648 } 3649 } else if ((status & PCS_ENCODE_ERR) != PCS_ENCODE_ERR) { 3650 if (sc->bge_link) { 3651 sc->bge_link = 0; 3652 3653 if (bootverbose) 3654 if_printf(ifp, "link DOWN\n"); 3655 3656 ifp->if_link_state = LINK_STATE_DOWN; 3657 if_link_state_change(ifp); 3658 } 3659 } 3660 3661 #undef PCS_ENCODE_ERR 3662 3663 /* Clear the attention. */ 3664 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 3665 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 3666 BGE_MACSTAT_LINK_CHANGED); 3667 } 3668 3669 static void 3670 bge_copper_link_upd(struct bge_softc *sc, uint32_t status __unused) 3671 { 3672 /* 3673 * Check that the AUTOPOLL bit is set before 3674 * processing the event as a real link change. 3675 * Turning AUTOPOLL on and off in the MII read/write 3676 * functions will often trigger a link status 3677 * interrupt for no reason. 3678 */ 3679 if (CSR_READ_4(sc, BGE_MI_MODE) & BGE_MIMODE_AUTOPOLL) { 3680 struct ifnet *ifp = &sc->arpcom.ac_if; 3681 struct mii_data *mii = device_get_softc(sc->bge_miibus); 3682 3683 mii_pollstat(mii); 3684 3685 if (!sc->bge_link && 3686 (mii->mii_media_status & IFM_ACTIVE) && 3687 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 3688 sc->bge_link++; 3689 if (bootverbose) 3690 if_printf(ifp, "link UP\n"); 3691 } else if (sc->bge_link && 3692 (!(mii->mii_media_status & IFM_ACTIVE) || 3693 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) { 3694 sc->bge_link = 0; 3695 if (bootverbose) 3696 if_printf(ifp, "link DOWN\n"); 3697 } 3698 } 3699 3700 /* Clear the attention. */ 3701 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED | 3702 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE | 3703 BGE_MACSTAT_LINK_CHANGED); 3704 } 3705 3706 static int 3707 bge_sysctl_rx_coal_ticks(SYSCTL_HANDLER_ARGS) 3708 { 3709 struct bge_softc *sc = arg1; 3710 3711 return bge_sysctl_coal_chg(oidp, arg1, arg2, req, 3712 &sc->bge_rx_coal_ticks, 3713 BGE_RX_COAL_TICKS_CHG); 3714 } 3715 3716 static int 3717 bge_sysctl_tx_coal_ticks(SYSCTL_HANDLER_ARGS) 3718 { 3719 struct bge_softc *sc = arg1; 3720 3721 return bge_sysctl_coal_chg(oidp, arg1, arg2, req, 3722 &sc->bge_tx_coal_ticks, 3723 BGE_TX_COAL_TICKS_CHG); 3724 } 3725 3726 static int 3727 bge_sysctl_rx_max_coal_bds(SYSCTL_HANDLER_ARGS) 3728 { 3729 struct bge_softc *sc = arg1; 3730 3731 return bge_sysctl_coal_chg(oidp, arg1, arg2, req, 3732 &sc->bge_rx_max_coal_bds, 3733 BGE_RX_MAX_COAL_BDS_CHG); 3734 } 3735 3736 static int 3737 bge_sysctl_tx_max_coal_bds(SYSCTL_HANDLER_ARGS) 3738 { 3739 struct bge_softc *sc = arg1; 3740 3741 return bge_sysctl_coal_chg(oidp, arg1, arg2, req, 3742 &sc->bge_tx_max_coal_bds, 3743 BGE_TX_MAX_COAL_BDS_CHG); 3744 } 3745 3746 static int 3747 bge_sysctl_coal_chg(SYSCTL_HANDLER_ARGS, uint32_t *coal, 3748 uint32_t coal_chg_mask) 3749 { 3750 struct bge_softc *sc = arg1; 3751 struct ifnet *ifp = &sc->arpcom.ac_if; 3752 int error = 0, v; 3753 3754 lwkt_serialize_enter(ifp->if_serializer); 3755 3756 v = *coal; 3757 error = sysctl_handle_int(oidp, &v, 0, req); 3758 if (!error && req->newptr != NULL) { 3759 if (v < 0) { 3760 error = EINVAL; 3761 } else { 3762 *coal = v; 3763 sc->bge_coal_chg |= coal_chg_mask; 3764 } 3765 } 3766 3767 lwkt_serialize_exit(ifp->if_serializer); 3768 return error; 3769 } 3770 3771 static void 3772 bge_coal_change(struct bge_softc *sc) 3773 { 3774 struct ifnet *ifp = &sc->arpcom.ac_if; 3775 uint32_t val; 3776 3777 ASSERT_SERIALIZED(ifp->if_serializer); 3778 3779 if (sc->bge_coal_chg & BGE_RX_COAL_TICKS_CHG) { 3780 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, 3781 sc->bge_rx_coal_ticks); 3782 DELAY(10); 3783 val = CSR_READ_4(sc, BGE_HCC_RX_COAL_TICKS); 3784 3785 if (bootverbose) { 3786 if_printf(ifp, "rx_coal_ticks -> %u\n", 3787 sc->bge_rx_coal_ticks); 3788 } 3789 } 3790 3791 if (sc->bge_coal_chg & BGE_TX_COAL_TICKS_CHG) { 3792 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, 3793 sc->bge_tx_coal_ticks); 3794 DELAY(10); 3795 val = CSR_READ_4(sc, BGE_HCC_TX_COAL_TICKS); 3796 3797 if (bootverbose) { 3798 if_printf(ifp, "tx_coal_ticks -> %u\n", 3799 sc->bge_tx_coal_ticks); 3800 } 3801 } 3802 3803 if (sc->bge_coal_chg & BGE_RX_MAX_COAL_BDS_CHG) { 3804 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, 3805 sc->bge_rx_max_coal_bds); 3806 DELAY(10); 3807 val = CSR_READ_4(sc, BGE_HCC_RX_MAX_COAL_BDS); 3808 3809 if (bootverbose) { 3810 if_printf(ifp, "rx_max_coal_bds -> %u\n", 3811 sc->bge_rx_max_coal_bds); 3812 } 3813 } 3814 3815 if (sc->bge_coal_chg & BGE_TX_MAX_COAL_BDS_CHG) { 3816 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, 3817 sc->bge_tx_max_coal_bds); 3818 DELAY(10); 3819 val = CSR_READ_4(sc, BGE_HCC_TX_MAX_COAL_BDS); 3820 3821 if (bootverbose) { 3822 if_printf(ifp, "tx_max_coal_bds -> %u\n", 3823 sc->bge_tx_max_coal_bds); 3824 } 3825 } 3826 3827 sc->bge_coal_chg = 0; 3828 } 3829 3830 static void 3831 bge_enable_intr(struct bge_softc *sc) 3832 { 3833 struct ifnet *ifp = &sc->arpcom.ac_if; 3834 3835 lwkt_serialize_handler_enable(ifp->if_serializer); 3836 3837 /* 3838 * Enable interrupt. 3839 */ 3840 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 0); 3841 3842 /* 3843 * Unmask the interrupt when we stop polling. 3844 */ 3845 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 3846 3847 /* 3848 * Trigger another interrupt, since above writing 3849 * to interrupt mailbox0 may acknowledge pending 3850 * interrupt. 3851 */ 3852 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET); 3853 } 3854 3855 static void 3856 bge_disable_intr(struct bge_softc *sc) 3857 { 3858 struct ifnet *ifp = &sc->arpcom.ac_if; 3859 3860 /* 3861 * Mask the interrupt when we start polling. 3862 */ 3863 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR); 3864 3865 /* 3866 * Acknowledge possible asserted interrupt. 3867 */ 3868 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 1); 3869 3870 lwkt_serialize_handler_disable(ifp->if_serializer); 3871 } 3872