1 /*- 2 * Copyright (c) 1995, David Greenman 3 * Copyright (c) 2001 Jonathan Lemon <jlemon@freebsd.org> 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice unmodified, this list of conditions, and the following 11 * disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD: src/sys/dev/fxp/if_fxp.c,v 1.110.2.30 2003/06/12 16:47:05 mux Exp $ 29 * $DragonFly: src/sys/dev/netif/fxp/if_fxp.c,v 1.61 2008/09/17 08:51:29 sephe Exp $ 30 */ 31 32 /* 33 * Intel EtherExpress Pro/100B PCI Fast Ethernet driver 34 */ 35 36 #include "opt_polling.h" 37 38 #include <sys/param.h> 39 #include <sys/systm.h> 40 #include <sys/mbuf.h> 41 #include <sys/malloc.h> 42 #include <sys/kernel.h> 43 #include <sys/interrupt.h> 44 #include <sys/socket.h> 45 #include <sys/sysctl.h> 46 #include <sys/thread2.h> 47 48 #include <net/if.h> 49 #include <net/ifq_var.h> 50 #include <net/if_dl.h> 51 #include <net/if_media.h> 52 53 #ifdef NS 54 #include <netns/ns.h> 55 #include <netns/ns_if.h> 56 #endif 57 58 #include <net/bpf.h> 59 #include <sys/sockio.h> 60 #include <sys/bus.h> 61 #include <sys/rman.h> 62 63 #include <net/ethernet.h> 64 #include <net/if_arp.h> 65 66 #include <vm/vm.h> /* for vtophys */ 67 #include <vm/pmap.h> /* for vtophys */ 68 69 #include <net/if_types.h> 70 #include <net/vlan/if_vlan_var.h> 71 72 #include <bus/pci/pcivar.h> 73 #include <bus/pci/pcireg.h> /* for PCIM_CMD_xxx */ 74 75 #include "../mii_layer/mii.h" 76 #include "../mii_layer/miivar.h" 77 78 #include "if_fxpreg.h" 79 #include "if_fxpvar.h" 80 #include "rcvbundl.h" 81 82 #include "miibus_if.h" 83 84 /* 85 * NOTE! On the Alpha, we have an alignment constraint. The 86 * card DMAs the packet immediately following the RFA. However, 87 * the first thing in the packet is a 14-byte Ethernet header. 88 * This means that the packet is misaligned. To compensate, 89 * we actually offset the RFA 2 bytes into the cluster. This 90 * alignes the packet after the Ethernet header at a 32-bit 91 * boundary. HOWEVER! This means that the RFA is misaligned! 92 */ 93 #define RFA_ALIGNMENT_FUDGE 2 94 95 /* 96 * Set initial transmit threshold at 64 (512 bytes). This is 97 * increased by 64 (512 bytes) at a time, to maximum of 192 98 * (1536 bytes), if an underrun occurs. 99 */ 100 static int tx_threshold = 64; 101 102 /* 103 * The configuration byte map has several undefined fields which 104 * must be one or must be zero. Set up a template for these bits 105 * only, (assuming a 82557 chip) leaving the actual configuration 106 * to fxp_init. 107 * 108 * See struct fxp_cb_config for the bit definitions. 109 */ 110 static u_char fxp_cb_config_template[] = { 111 0x0, 0x0, /* cb_status */ 112 0x0, 0x0, /* cb_command */ 113 0x0, 0x0, 0x0, 0x0, /* link_addr */ 114 0x0, /* 0 */ 115 0x0, /* 1 */ 116 0x0, /* 2 */ 117 0x0, /* 3 */ 118 0x0, /* 4 */ 119 0x0, /* 5 */ 120 0x32, /* 6 */ 121 0x0, /* 7 */ 122 0x0, /* 8 */ 123 0x0, /* 9 */ 124 0x6, /* 10 */ 125 0x0, /* 11 */ 126 0x0, /* 12 */ 127 0x0, /* 13 */ 128 0xf2, /* 14 */ 129 0x48, /* 15 */ 130 0x0, /* 16 */ 131 0x40, /* 17 */ 132 0xf0, /* 18 */ 133 0x0, /* 19 */ 134 0x3f, /* 20 */ 135 0x5 /* 21 */ 136 }; 137 138 struct fxp_ident { 139 u_int16_t devid; 140 int16_t revid; /* -1 matches anything */ 141 char *name; 142 }; 143 144 /* 145 * Claim various Intel PCI device identifiers for this driver. The 146 * sub-vendor and sub-device field are extensively used to identify 147 * particular variants, but we don't currently differentiate between 148 * them. 149 */ 150 static struct fxp_ident fxp_ident_table[] = { 151 { 0x1029, -1, "Intel 82559 PCI/CardBus Pro/100" }, 152 { 0x1030, -1, "Intel 82559 Pro/100 Ethernet" }, 153 { 0x1031, -1, "Intel 82801CAM (ICH3) Pro/100 VE Ethernet" }, 154 { 0x1032, -1, "Intel 82801CAM (ICH3) Pro/100 VE Ethernet" }, 155 { 0x1033, -1, "Intel 82801CAM (ICH3) Pro/100 VM Ethernet" }, 156 { 0x1034, -1, "Intel 82801CAM (ICH3) Pro/100 VM Ethernet" }, 157 { 0x1035, -1, "Intel 82801CAM (ICH3) Pro/100 Ethernet" }, 158 { 0x1036, -1, "Intel 82801CAM (ICH3) Pro/100 Ethernet" }, 159 { 0x1037, -1, "Intel 82801CAM (ICH3) Pro/100 Ethernet" }, 160 { 0x1038, -1, "Intel 82801CAM (ICH3) Pro/100 VM Ethernet" }, 161 { 0x1039, -1, "Intel 82801DB (ICH4) Pro/100 VE Ethernet" }, 162 { 0x103A, -1, "Intel 82801DB (ICH4) Pro/100 Ethernet" }, 163 { 0x103B, -1, "Intel 82801DB (ICH4) Pro/100 VM Ethernet" }, 164 { 0x103C, -1, "Intel 82801DB (ICH4) Pro/100 Ethernet" }, 165 { 0x103D, -1, "Intel 82801DB (ICH4) Pro/100 VE Ethernet" }, 166 { 0x103E, -1, "Intel 82801DB (ICH4) Pro/100 VM Ethernet" }, 167 { 0x1050, -1, "Intel 82801BA (D865) Pro/100 VE Ethernet" }, 168 { 0x1051, -1, "Intel 82562ET (ICH5/ICH5R) Pro/100 VE Ethernet" }, 169 { 0x1059, -1, "Intel 82551QM Pro/100 M Mobile Connection" }, 170 { 0x1064, -1, "Intel 82562ET/EZ/GT/GZ (ICH6/ICH6R) Pro/100 VE Ethernet" }, 171 { 0x1065, -1, "Intel 82562ET/EZ/GT/GZ PRO/100 VE Ethernet" }, 172 { 0x1068, -1, "Intel 82801FBM (ICH6-M) Pro/100 VE Ethernet" }, 173 { 0x1069, -1, "Intel 82562EM/EX/GX Pro/100 Ethernet" }, 174 { 0x1091, -1, "Intel 82562GX Pro/100 Ethernet" }, 175 { 0x1092, -1, "Intel Pro/100 VE Network Connection" }, 176 { 0x1093, -1, "Intel Pro/100 VM Network Connection" }, 177 { 0x1094, -1, "Intel Pro/100 946GZ (ICH7) Network Connection" }, 178 { 0x1209, -1, "Intel 82559ER Embedded 10/100 Ethernet" }, 179 { 0x1229, 0x01, "Intel 82557 Pro/100 Ethernet" }, 180 { 0x1229, 0x02, "Intel 82557 Pro/100 Ethernet" }, 181 { 0x1229, 0x03, "Intel 82557 Pro/100 Ethernet" }, 182 { 0x1229, 0x04, "Intel 82558 Pro/100 Ethernet" }, 183 { 0x1229, 0x05, "Intel 82558 Pro/100 Ethernet" }, 184 { 0x1229, 0x06, "Intel 82559 Pro/100 Ethernet" }, 185 { 0x1229, 0x07, "Intel 82559 Pro/100 Ethernet" }, 186 { 0x1229, 0x08, "Intel 82559 Pro/100 Ethernet" }, 187 { 0x1229, 0x09, "Intel 82559ER Pro/100 Ethernet" }, 188 { 0x1229, 0x0c, "Intel 82550 Pro/100 Ethernet" }, 189 { 0x1229, 0x0d, "Intel 82550 Pro/100 Ethernet" }, 190 { 0x1229, 0x0e, "Intel 82550 Pro/100 Ethernet" }, 191 { 0x1229, 0x0f, "Intel 82551 Pro/100 Ethernet" }, 192 { 0x1229, 0x10, "Intel 82551 Pro/100 Ethernet" }, 193 { 0x1229, -1, "Intel 82557/8/9 Pro/100 Ethernet" }, 194 { 0x2449, -1, "Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet" }, 195 { 0x27dc, -1, "Intel 82801GB (ICH7) 10/100 Ethernet" }, 196 { 0, -1, NULL }, 197 }; 198 199 static int fxp_probe(device_t dev); 200 static int fxp_attach(device_t dev); 201 static int fxp_detach(device_t dev); 202 static int fxp_shutdown(device_t dev); 203 static int fxp_suspend(device_t dev); 204 static int fxp_resume(device_t dev); 205 206 static void fxp_intr(void *xsc); 207 static void fxp_intr_body(struct fxp_softc *sc, 208 u_int8_t statack, int count); 209 210 static void fxp_init(void *xsc); 211 static void fxp_tick(void *xsc); 212 static void fxp_powerstate_d0(device_t dev); 213 static void fxp_start(struct ifnet *ifp); 214 static void fxp_stop(struct fxp_softc *sc); 215 static void fxp_release(device_t dev); 216 static int fxp_ioctl(struct ifnet *ifp, u_long command, 217 caddr_t data, struct ucred *); 218 static void fxp_watchdog(struct ifnet *ifp); 219 static int fxp_add_rfabuf(struct fxp_softc *sc, struct mbuf *oldm); 220 static int fxp_mc_addrs(struct fxp_softc *sc); 221 static void fxp_mc_setup(struct fxp_softc *sc); 222 static u_int16_t fxp_eeprom_getword(struct fxp_softc *sc, int offset, 223 int autosize); 224 static void fxp_eeprom_putword(struct fxp_softc *sc, int offset, 225 u_int16_t data); 226 static void fxp_autosize_eeprom(struct fxp_softc *sc); 227 static void fxp_read_eeprom(struct fxp_softc *sc, u_short *data, 228 int offset, int words); 229 static void fxp_write_eeprom(struct fxp_softc *sc, u_short *data, 230 int offset, int words); 231 static int fxp_ifmedia_upd(struct ifnet *ifp); 232 static void fxp_ifmedia_sts(struct ifnet *ifp, 233 struct ifmediareq *ifmr); 234 static int fxp_serial_ifmedia_upd(struct ifnet *ifp); 235 static void fxp_serial_ifmedia_sts(struct ifnet *ifp, 236 struct ifmediareq *ifmr); 237 static int fxp_miibus_readreg(device_t dev, int phy, int reg); 238 static void fxp_miibus_writereg(device_t dev, int phy, int reg, 239 int value); 240 static void fxp_load_ucode(struct fxp_softc *sc); 241 static int sysctl_hw_fxp_bundle_max(SYSCTL_HANDLER_ARGS); 242 static int sysctl_hw_fxp_int_delay(SYSCTL_HANDLER_ARGS); 243 #ifdef DEVICE_POLLING 244 static poll_handler_t fxp_poll; 245 #endif 246 247 static void fxp_lwcopy(volatile u_int32_t *src, 248 volatile u_int32_t *dst); 249 static void fxp_scb_wait(struct fxp_softc *sc); 250 static void fxp_scb_cmd(struct fxp_softc *sc, int cmd); 251 static void fxp_dma_wait(volatile u_int16_t *status, 252 struct fxp_softc *sc); 253 254 static device_method_t fxp_methods[] = { 255 /* Device interface */ 256 DEVMETHOD(device_probe, fxp_probe), 257 DEVMETHOD(device_attach, fxp_attach), 258 DEVMETHOD(device_detach, fxp_detach), 259 DEVMETHOD(device_shutdown, fxp_shutdown), 260 DEVMETHOD(device_suspend, fxp_suspend), 261 DEVMETHOD(device_resume, fxp_resume), 262 263 /* MII interface */ 264 DEVMETHOD(miibus_readreg, fxp_miibus_readreg), 265 DEVMETHOD(miibus_writereg, fxp_miibus_writereg), 266 267 { 0, 0 } 268 }; 269 270 static driver_t fxp_driver = { 271 "fxp", 272 fxp_methods, 273 sizeof(struct fxp_softc), 274 }; 275 276 static devclass_t fxp_devclass; 277 278 DECLARE_DUMMY_MODULE(if_fxp); 279 MODULE_DEPEND(if_fxp, miibus, 1, 1, 1); 280 DRIVER_MODULE(if_fxp, pci, fxp_driver, fxp_devclass, 0, 0); 281 DRIVER_MODULE(if_fxp, cardbus, fxp_driver, fxp_devclass, 0, 0); 282 DRIVER_MODULE(miibus, fxp, miibus_driver, miibus_devclass, 0, 0); 283 284 static int fxp_rnr; 285 SYSCTL_INT(_hw, OID_AUTO, fxp_rnr, CTLFLAG_RW, &fxp_rnr, 0, "fxp rnr events"); 286 287 /* 288 * Copy a 16-bit aligned 32-bit quantity. 289 */ 290 static void 291 fxp_lwcopy(volatile u_int32_t *src, volatile u_int32_t *dst) 292 { 293 #ifdef __i386__ 294 *dst = *src; 295 #else 296 volatile u_int16_t *a = (volatile u_int16_t *)src; 297 volatile u_int16_t *b = (volatile u_int16_t *)dst; 298 299 b[0] = a[0]; 300 b[1] = a[1]; 301 #endif 302 } 303 304 /* 305 * Wait for the previous command to be accepted (but not necessarily 306 * completed). 307 */ 308 static void 309 fxp_scb_wait(struct fxp_softc *sc) 310 { 311 int i = 10000; 312 313 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i) 314 DELAY(2); 315 if (i == 0) { 316 if_printf(&sc->arpcom.ac_if, 317 "SCB timeout: 0x%x 0x%x 0x%x 0x%x\n", 318 CSR_READ_1(sc, FXP_CSR_SCB_COMMAND), 319 CSR_READ_1(sc, FXP_CSR_SCB_STATACK), 320 CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS), 321 CSR_READ_2(sc, FXP_CSR_FLOWCONTROL)); 322 } 323 } 324 325 static void 326 fxp_scb_cmd(struct fxp_softc *sc, int cmd) 327 { 328 329 if (cmd == FXP_SCB_COMMAND_CU_RESUME && sc->cu_resume_bug) { 330 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_CB_COMMAND_NOP); 331 fxp_scb_wait(sc); 332 } 333 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd); 334 } 335 336 static void 337 fxp_dma_wait(volatile u_int16_t *status, struct fxp_softc *sc) 338 { 339 int i = 10000; 340 341 while (!(*status & FXP_CB_STATUS_C) && --i) 342 DELAY(2); 343 if (i == 0) 344 if_printf(&sc->arpcom.ac_if, "DMA timeout\n"); 345 } 346 347 /* 348 * Return identification string if this is device is ours. 349 */ 350 static int 351 fxp_probe(device_t dev) 352 { 353 u_int16_t devid; 354 u_int8_t revid; 355 struct fxp_ident *ident; 356 357 if (pci_get_vendor(dev) == FXP_VENDORID_INTEL) { 358 devid = pci_get_device(dev); 359 revid = pci_get_revid(dev); 360 for (ident = fxp_ident_table; ident->name != NULL; ident++) { 361 if (ident->devid == devid && 362 (ident->revid == revid || ident->revid == -1)) { 363 device_set_desc(dev, ident->name); 364 return (0); 365 } 366 } 367 } 368 return (ENXIO); 369 } 370 371 static void 372 fxp_powerstate_d0(device_t dev) 373 { 374 u_int32_t iobase, membase, irq; 375 376 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { 377 /* Save important PCI config data. */ 378 iobase = pci_read_config(dev, FXP_PCI_IOBA, 4); 379 membase = pci_read_config(dev, FXP_PCI_MMBA, 4); 380 irq = pci_read_config(dev, PCIR_INTLINE, 4); 381 382 /* Reset the power state. */ 383 device_printf(dev, "chip is in D%d power mode " 384 "-- setting to D0\n", pci_get_powerstate(dev)); 385 386 pci_set_powerstate(dev, PCI_POWERSTATE_D0); 387 388 /* Restore PCI config data. */ 389 pci_write_config(dev, FXP_PCI_IOBA, iobase, 4); 390 pci_write_config(dev, FXP_PCI_MMBA, membase, 4); 391 pci_write_config(dev, PCIR_INTLINE, irq, 4); 392 } 393 } 394 395 static int 396 fxp_attach(device_t dev) 397 { 398 int error = 0; 399 struct fxp_softc *sc = device_get_softc(dev); 400 struct ifnet *ifp; 401 u_int32_t val; 402 u_int16_t data; 403 int i, rid, m1, m2, prefer_iomap; 404 405 callout_init(&sc->fxp_stat_timer); 406 sysctl_ctx_init(&sc->sysctl_ctx); 407 408 /* 409 * Enable bus mastering. Enable memory space too, in case 410 * BIOS/Prom forgot about it. 411 */ 412 pci_enable_busmaster(dev); 413 pci_enable_io(dev, SYS_RES_MEMORY); 414 val = pci_read_config(dev, PCIR_COMMAND, 2); 415 416 fxp_powerstate_d0(dev); 417 418 /* 419 * Figure out which we should try first - memory mapping or i/o mapping? 420 * We default to memory mapping. Then we accept an override from the 421 * command line. Then we check to see which one is enabled. 422 */ 423 m1 = PCIM_CMD_MEMEN; 424 m2 = PCIM_CMD_PORTEN; 425 prefer_iomap = 0; 426 if (resource_int_value(device_get_name(dev), device_get_unit(dev), 427 "prefer_iomap", &prefer_iomap) == 0 && prefer_iomap != 0) { 428 m1 = PCIM_CMD_PORTEN; 429 m2 = PCIM_CMD_MEMEN; 430 } 431 432 if (val & m1) { 433 sc->rtp = 434 (m1 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT; 435 sc->rgd = (m1 == PCIM_CMD_MEMEN)? FXP_PCI_MMBA : FXP_PCI_IOBA; 436 sc->mem = bus_alloc_resource_any(dev, sc->rtp, &sc->rgd, 437 RF_ACTIVE); 438 } 439 if (sc->mem == NULL && (val & m2)) { 440 sc->rtp = 441 (m2 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT; 442 sc->rgd = (m2 == PCIM_CMD_MEMEN)? FXP_PCI_MMBA : FXP_PCI_IOBA; 443 sc->mem = bus_alloc_resource_any(dev, sc->rtp, &sc->rgd, 444 RF_ACTIVE); 445 } 446 447 if (!sc->mem) { 448 device_printf(dev, "could not map device registers\n"); 449 error = ENXIO; 450 goto fail; 451 } 452 if (bootverbose) { 453 device_printf(dev, "using %s space register mapping\n", 454 sc->rtp == SYS_RES_MEMORY? "memory" : "I/O"); 455 } 456 457 sc->sc_st = rman_get_bustag(sc->mem); 458 sc->sc_sh = rman_get_bushandle(sc->mem); 459 460 /* 461 * Allocate our interrupt. 462 */ 463 rid = 0; 464 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 465 RF_SHAREABLE | RF_ACTIVE); 466 if (sc->irq == NULL) { 467 device_printf(dev, "could not map interrupt\n"); 468 error = ENXIO; 469 goto fail; 470 } 471 472 /* 473 * Reset to a stable state. 474 */ 475 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 476 DELAY(10); 477 478 sc->cbl_base = kmalloc(sizeof(struct fxp_cb_tx) * FXP_NTXCB, 479 M_DEVBUF, M_WAITOK | M_ZERO); 480 481 sc->fxp_stats = kmalloc(sizeof(struct fxp_stats), M_DEVBUF, 482 M_WAITOK | M_ZERO); 483 484 sc->mcsp = kmalloc(sizeof(struct fxp_cb_mcs), M_DEVBUF, M_WAITOK); 485 486 /* 487 * Pre-allocate our receive buffers. 488 */ 489 for (i = 0; i < FXP_NRFABUFS; i++) { 490 if (fxp_add_rfabuf(sc, NULL) != 0) { 491 goto failmem; 492 } 493 } 494 495 /* 496 * Find out how large of an SEEPROM we have. 497 */ 498 fxp_autosize_eeprom(sc); 499 500 /* 501 * Determine whether we must use the 503 serial interface. 502 */ 503 fxp_read_eeprom(sc, &data, 6, 1); 504 if ((data & FXP_PHY_DEVICE_MASK) != 0 && 505 (data & FXP_PHY_SERIAL_ONLY)) 506 sc->flags |= FXP_FLAG_SERIAL_MEDIA; 507 508 /* 509 * Create the sysctl tree 510 */ 511 sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, 512 SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, 513 device_get_nameunit(dev), CTLFLAG_RD, 0, ""); 514 if (sc->sysctl_tree == NULL) 515 goto fail; 516 SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree), 517 OID_AUTO, "int_delay", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_PRISON, 518 &sc->tunable_int_delay, 0, &sysctl_hw_fxp_int_delay, "I", 519 "FXP driver receive interrupt microcode bundling delay"); 520 SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree), 521 OID_AUTO, "bundle_max", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_PRISON, 522 &sc->tunable_bundle_max, 0, &sysctl_hw_fxp_bundle_max, "I", 523 "FXP driver receive interrupt microcode bundle size limit"); 524 525 /* 526 * Pull in device tunables. 527 */ 528 sc->tunable_int_delay = TUNABLE_INT_DELAY; 529 sc->tunable_bundle_max = TUNABLE_BUNDLE_MAX; 530 resource_int_value(device_get_name(dev), device_get_unit(dev), 531 "int_delay", &sc->tunable_int_delay); 532 resource_int_value(device_get_name(dev), device_get_unit(dev), 533 "bundle_max", &sc->tunable_bundle_max); 534 535 /* 536 * Find out the chip revision; lump all 82557 revs together. 537 */ 538 fxp_read_eeprom(sc, &data, 5, 1); 539 if ((data >> 8) == 1) 540 sc->revision = FXP_REV_82557; 541 else 542 sc->revision = pci_get_revid(dev); 543 544 /* 545 * Enable workarounds for certain chip revision deficiencies. 546 * 547 * Systems based on the ICH2/ICH2-M chip from Intel, and possibly 548 * some systems based a normal 82559 design, have a defect where 549 * the chip can cause a PCI protocol violation if it receives 550 * a CU_RESUME command when it is entering the IDLE state. The 551 * workaround is to disable Dynamic Standby Mode, so the chip never 552 * deasserts CLKRUN#, and always remains in an active state. 553 * 554 * See Intel 82801BA/82801BAM Specification Update, Errata #30. 555 */ 556 i = pci_get_device(dev); 557 if (i == 0x2449 || (i > 0x1030 && i < 0x1039) || 558 sc->revision >= FXP_REV_82559_A0) { 559 fxp_read_eeprom(sc, &data, 10, 1); 560 if (data & 0x02) { /* STB enable */ 561 u_int16_t cksum; 562 int i; 563 564 device_printf(dev, 565 "Disabling dynamic standby mode in EEPROM\n"); 566 data &= ~0x02; 567 fxp_write_eeprom(sc, &data, 10, 1); 568 device_printf(dev, "New EEPROM ID: 0x%x\n", data); 569 cksum = 0; 570 for (i = 0; i < (1 << sc->eeprom_size) - 1; i++) { 571 fxp_read_eeprom(sc, &data, i, 1); 572 cksum += data; 573 } 574 i = (1 << sc->eeprom_size) - 1; 575 cksum = 0xBABA - cksum; 576 fxp_read_eeprom(sc, &data, i, 1); 577 fxp_write_eeprom(sc, &cksum, i, 1); 578 device_printf(dev, 579 "EEPROM checksum @ 0x%x: 0x%x -> 0x%x\n", 580 i, data, cksum); 581 #if 1 582 /* 583 * If the user elects to continue, try the software 584 * workaround, as it is better than nothing. 585 */ 586 sc->flags |= FXP_FLAG_CU_RESUME_BUG; 587 #endif 588 } 589 } 590 591 /* 592 * If we are not a 82557 chip, we can enable extended features. 593 */ 594 if (sc->revision != FXP_REV_82557) { 595 /* 596 * If MWI is enabled in the PCI configuration, and there 597 * is a valid cacheline size (8 or 16 dwords), then tell 598 * the board to turn on MWI. 599 */ 600 if (val & PCIM_CMD_MWRICEN && 601 pci_read_config(dev, PCIR_CACHELNSZ, 1) != 0) 602 sc->flags |= FXP_FLAG_MWI_ENABLE; 603 604 /* turn on the extended TxCB feature */ 605 sc->flags |= FXP_FLAG_EXT_TXCB; 606 607 /* enable reception of long frames for VLAN */ 608 sc->flags |= FXP_FLAG_LONG_PKT_EN; 609 } 610 611 /* 612 * Read MAC address. 613 */ 614 fxp_read_eeprom(sc, (u_int16_t *)sc->arpcom.ac_enaddr, 0, 3); 615 if (sc->flags & FXP_FLAG_SERIAL_MEDIA) 616 device_printf(dev, "10Mbps\n"); 617 if (bootverbose) { 618 device_printf(dev, "PCI IDs: %04x %04x %04x %04x %04x\n", 619 pci_get_vendor(dev), pci_get_device(dev), 620 pci_get_subvendor(dev), pci_get_subdevice(dev), 621 pci_get_revid(dev)); 622 fxp_read_eeprom(sc, &data, 10, 1); 623 device_printf(dev, "Dynamic Standby mode is %s\n", 624 data & 0x02 ? "enabled" : "disabled"); 625 } 626 627 /* 628 * If this is only a 10Mbps device, then there is no MII, and 629 * the PHY will use a serial interface instead. 630 * 631 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter 632 * doesn't have a programming interface of any sort. The 633 * media is sensed automatically based on how the link partner 634 * is configured. This is, in essence, manual configuration. 635 */ 636 if (sc->flags & FXP_FLAG_SERIAL_MEDIA) { 637 ifmedia_init(&sc->sc_media, 0, fxp_serial_ifmedia_upd, 638 fxp_serial_ifmedia_sts); 639 ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 640 ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL); 641 } else { 642 if (mii_phy_probe(dev, &sc->miibus, fxp_ifmedia_upd, 643 fxp_ifmedia_sts)) { 644 device_printf(dev, "MII without any PHY!\n"); 645 error = ENXIO; 646 goto fail; 647 } 648 } 649 650 ifp = &sc->arpcom.ac_if; 651 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 652 ifp->if_baudrate = 100000000; 653 ifp->if_init = fxp_init; 654 ifp->if_softc = sc; 655 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 656 ifp->if_ioctl = fxp_ioctl; 657 ifp->if_start = fxp_start; 658 #ifdef DEVICE_POLLING 659 ifp->if_poll = fxp_poll; 660 #endif 661 ifp->if_watchdog = fxp_watchdog; 662 663 /* 664 * Attach the interface. 665 */ 666 ether_ifattach(ifp, sc->arpcom.ac_enaddr, NULL); 667 668 /* 669 * Tell the upper layer(s) we support long frames. 670 */ 671 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); 672 673 /* 674 * Let the system queue as many packets as we have available 675 * TX descriptors. 676 */ 677 ifq_set_maxlen(&ifp->if_snd, FXP_USABLE_TXCB); 678 ifq_set_ready(&ifp->if_snd); 679 680 error = bus_setup_intr(dev, sc->irq, INTR_MPSAFE, 681 fxp_intr, sc, &sc->ih, 682 ifp->if_serializer); 683 if (error) { 684 ether_ifdetach(ifp); 685 if (sc->flags & FXP_FLAG_SERIAL_MEDIA) 686 ifmedia_removeall(&sc->sc_media); 687 device_printf(dev, "could not setup irq\n"); 688 goto fail; 689 } 690 691 ifp->if_cpuid = ithread_cpuid(rman_get_start(sc->irq)); 692 KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus); 693 694 return (0); 695 696 failmem: 697 device_printf(dev, "Failed to malloc memory\n"); 698 error = ENOMEM; 699 fail: 700 fxp_release(dev); 701 return (error); 702 } 703 704 /* 705 * release all resources 706 */ 707 static void 708 fxp_release(device_t dev) 709 { 710 struct fxp_softc *sc = device_get_softc(dev); 711 712 if (sc->miibus) 713 device_delete_child(dev, sc->miibus); 714 bus_generic_detach(dev); 715 716 if (sc->cbl_base) 717 kfree(sc->cbl_base, M_DEVBUF); 718 if (sc->fxp_stats) 719 kfree(sc->fxp_stats, M_DEVBUF); 720 if (sc->mcsp) 721 kfree(sc->mcsp, M_DEVBUF); 722 if (sc->rfa_headm) 723 m_freem(sc->rfa_headm); 724 725 if (sc->irq) 726 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq); 727 if (sc->mem) 728 bus_release_resource(dev, sc->rtp, sc->rgd, sc->mem); 729 730 sysctl_ctx_free(&sc->sysctl_ctx); 731 } 732 733 /* 734 * Detach interface. 735 */ 736 static int 737 fxp_detach(device_t dev) 738 { 739 struct fxp_softc *sc = device_get_softc(dev); 740 741 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 742 743 /* 744 * Stop DMA and drop transmit queue. 745 */ 746 fxp_stop(sc); 747 748 /* 749 * Disable interrupts. 750 * 751 * NOTE: This should be done after fxp_stop(), because software 752 * resetting in fxp_stop() may leave interrupts turned on. 753 */ 754 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE); 755 756 /* 757 * Free all media structures. 758 */ 759 if (sc->flags & FXP_FLAG_SERIAL_MEDIA) 760 ifmedia_removeall(&sc->sc_media); 761 762 if (sc->ih) 763 bus_teardown_intr(dev, sc->irq, sc->ih); 764 765 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 766 767 /* 768 * Close down routes etc. 769 */ 770 ether_ifdetach(&sc->arpcom.ac_if); 771 772 /* Release our allocated resources. */ 773 fxp_release(dev); 774 775 return (0); 776 } 777 778 /* 779 * Device shutdown routine. Called at system shutdown after sync. The 780 * main purpose of this routine is to shut off receiver DMA so that 781 * kernel memory doesn't get clobbered during warmboot. 782 */ 783 static int 784 fxp_shutdown(device_t dev) 785 { 786 struct fxp_softc *sc = device_get_softc(dev); 787 struct ifnet *ifp = &sc->arpcom.ac_if; 788 789 lwkt_serialize_enter(ifp->if_serializer); 790 /* 791 * Make sure that DMA is disabled prior to reboot. Not doing 792 * do could allow DMA to corrupt kernel memory during the 793 * reboot before the driver initializes. 794 */ 795 fxp_stop(sc); 796 lwkt_serialize_exit(ifp->if_serializer); 797 return (0); 798 } 799 800 /* 801 * Device suspend routine. Stop the interface and save some PCI 802 * settings in case the BIOS doesn't restore them properly on 803 * resume. 804 */ 805 static int 806 fxp_suspend(device_t dev) 807 { 808 struct fxp_softc *sc = device_get_softc(dev); 809 int i; 810 811 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 812 813 fxp_stop(sc); 814 815 for (i = 0; i < 5; i++) 816 sc->saved_maps[i] = pci_read_config(dev, PCIR_BAR(i), 4); 817 sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4); 818 sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1); 819 sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 820 sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1); 821 822 sc->suspended = 1; 823 824 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 825 return (0); 826 } 827 828 /* 829 * Device resume routine. Restore some PCI settings in case the BIOS 830 * doesn't, re-enable busmastering, and restart the interface if 831 * appropriate. 832 */ 833 static int 834 fxp_resume(device_t dev) 835 { 836 struct fxp_softc *sc = device_get_softc(dev); 837 struct ifnet *ifp = &sc->arpcom.ac_if; 838 int i; 839 840 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 841 842 fxp_powerstate_d0(dev); 843 844 /* better way to do this? */ 845 for (i = 0; i < 5; i++) 846 pci_write_config(dev, PCIR_BAR(i), sc->saved_maps[i], 4); 847 pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4); 848 pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1); 849 pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1); 850 pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1); 851 852 /* reenable busmastering and memory space */ 853 pci_enable_busmaster(dev); 854 pci_enable_io(dev, SYS_RES_MEMORY); 855 856 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 857 DELAY(10); 858 859 /* reinitialize interface if necessary */ 860 if (ifp->if_flags & IFF_UP) 861 fxp_init(sc); 862 863 sc->suspended = 0; 864 865 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 866 return (0); 867 } 868 869 static void 870 fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int length) 871 { 872 u_int16_t reg; 873 int x; 874 875 /* 876 * Shift in data. 877 */ 878 for (x = 1 << (length - 1); x; x >>= 1) { 879 if (data & x) 880 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 881 else 882 reg = FXP_EEPROM_EECS; 883 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 884 DELAY(1); 885 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK); 886 DELAY(1); 887 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 888 DELAY(1); 889 } 890 } 891 892 /* 893 * Read from the serial EEPROM. Basically, you manually shift in 894 * the read opcode (one bit at a time) and then shift in the address, 895 * and then you shift out the data (all of this one bit at a time). 896 * The word size is 16 bits, so you have to provide the address for 897 * every 16 bits of data. 898 */ 899 static u_int16_t 900 fxp_eeprom_getword(struct fxp_softc *sc, int offset, int autosize) 901 { 902 u_int16_t reg, data; 903 int x; 904 905 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 906 /* 907 * Shift in read opcode. 908 */ 909 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 910 /* 911 * Shift in address. 912 */ 913 data = 0; 914 for (x = 1 << (sc->eeprom_size - 1); x; x >>= 1) { 915 if (offset & x) 916 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 917 else 918 reg = FXP_EEPROM_EECS; 919 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 920 DELAY(1); 921 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK); 922 DELAY(1); 923 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 924 DELAY(1); 925 reg = CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO; 926 data++; 927 if (autosize && reg == 0) { 928 sc->eeprom_size = data; 929 break; 930 } 931 } 932 /* 933 * Shift out data. 934 */ 935 data = 0; 936 reg = FXP_EEPROM_EECS; 937 for (x = 1 << 15; x; x >>= 1) { 938 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK); 939 DELAY(1); 940 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO) 941 data |= x; 942 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 943 DELAY(1); 944 } 945 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 946 DELAY(1); 947 948 return (data); 949 } 950 951 static void 952 fxp_eeprom_putword(struct fxp_softc *sc, int offset, u_int16_t data) 953 { 954 int i; 955 956 /* 957 * Erase/write enable. 958 */ 959 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 960 fxp_eeprom_shiftin(sc, 0x4, 3); 961 fxp_eeprom_shiftin(sc, 0x03 << (sc->eeprom_size - 2), sc->eeprom_size); 962 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 963 DELAY(1); 964 /* 965 * Shift in write opcode, address, data. 966 */ 967 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 968 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3); 969 fxp_eeprom_shiftin(sc, offset, sc->eeprom_size); 970 fxp_eeprom_shiftin(sc, data, 16); 971 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 972 DELAY(1); 973 /* 974 * Wait for EEPROM to finish up. 975 */ 976 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 977 DELAY(1); 978 for (i = 0; i < 1000; i++) { 979 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO) 980 break; 981 DELAY(50); 982 } 983 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 984 DELAY(1); 985 /* 986 * Erase/write disable. 987 */ 988 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 989 fxp_eeprom_shiftin(sc, 0x4, 3); 990 fxp_eeprom_shiftin(sc, 0, sc->eeprom_size); 991 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 992 DELAY(1); 993 } 994 995 /* 996 * From NetBSD: 997 * 998 * Figure out EEPROM size. 999 * 1000 * 559's can have either 64-word or 256-word EEPROMs, the 558 1001 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet 1002 * talks about the existance of 16 to 256 word EEPROMs. 1003 * 1004 * The only known sizes are 64 and 256, where the 256 version is used 1005 * by CardBus cards to store CIS information. 1006 * 1007 * The address is shifted in msb-to-lsb, and after the last 1008 * address-bit the EEPROM is supposed to output a `dummy zero' bit, 1009 * after which follows the actual data. We try to detect this zero, by 1010 * probing the data-out bit in the EEPROM control register just after 1011 * having shifted in a bit. If the bit is zero, we assume we've 1012 * shifted enough address bits. The data-out should be tri-state, 1013 * before this, which should translate to a logical one. 1014 */ 1015 static void 1016 fxp_autosize_eeprom(struct fxp_softc *sc) 1017 { 1018 1019 /* guess maximum size of 256 words */ 1020 sc->eeprom_size = 8; 1021 1022 /* autosize */ 1023 fxp_eeprom_getword(sc, 0, 1); 1024 } 1025 1026 static void 1027 fxp_read_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words) 1028 { 1029 int i; 1030 1031 for (i = 0; i < words; i++) 1032 data[i] = fxp_eeprom_getword(sc, offset + i, 0); 1033 } 1034 1035 static void 1036 fxp_write_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words) 1037 { 1038 int i; 1039 1040 for (i = 0; i < words; i++) 1041 fxp_eeprom_putword(sc, offset + i, data[i]); 1042 } 1043 1044 /* 1045 * Start packet transmission on the interface. 1046 */ 1047 static void 1048 fxp_start(struct ifnet *ifp) 1049 { 1050 struct fxp_softc *sc = ifp->if_softc; 1051 struct fxp_cb_tx *txp; 1052 1053 ASSERT_SERIALIZED(ifp->if_serializer); 1054 1055 /* 1056 * See if we need to suspend xmit until the multicast filter 1057 * has been reprogrammed (which can only be done at the head 1058 * of the command chain). 1059 */ 1060 if (sc->need_mcsetup) { 1061 ifq_purge(&ifp->if_snd); 1062 return; 1063 } 1064 1065 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 1066 return; 1067 1068 txp = NULL; 1069 1070 /* 1071 * We're finished if there is nothing more to add to the list or if 1072 * we're all filled up with buffers to transmit. 1073 * NOTE: One TxCB is reserved to guarantee that fxp_mc_setup() can add 1074 * a NOP command when needed. 1075 */ 1076 while (!ifq_is_empty(&ifp->if_snd) && sc->tx_queued < FXP_USABLE_TXCB) { 1077 struct mbuf *m, *mb_head; 1078 int segment, ntries = 0; 1079 1080 /* 1081 * Grab a packet to transmit. 1082 */ 1083 mb_head = ifq_dequeue(&ifp->if_snd, NULL); 1084 if (mb_head == NULL) 1085 break; 1086 tbdinit: 1087 /* 1088 * Make sure that the packet fits into one TX desc 1089 */ 1090 segment = 0; 1091 for (m = mb_head; m != NULL; m = m->m_next) { 1092 if (m->m_len != 0) { 1093 ++segment; 1094 if (segment >= FXP_NTXSEG) 1095 break; 1096 } 1097 } 1098 if (segment >= FXP_NTXSEG) { 1099 struct mbuf *mn; 1100 1101 if (ntries) { 1102 /* 1103 * Packet is excessively fragmented, 1104 * and will never fit into one TX 1105 * desc. Give it up. 1106 */ 1107 m_freem(mb_head); 1108 ifp->if_oerrors++; 1109 continue; 1110 } 1111 1112 mn = m_dup(mb_head, MB_DONTWAIT); 1113 if (mn == NULL) { 1114 m_freem(mb_head); 1115 ifp->if_oerrors++; 1116 continue; 1117 } 1118 1119 m_freem(mb_head); 1120 mb_head = mn; 1121 ntries = 1; 1122 goto tbdinit; 1123 } 1124 1125 /* 1126 * Get pointer to next available tx desc. 1127 */ 1128 txp = sc->cbl_last->next; 1129 1130 /* 1131 * Go through each of the mbufs in the chain and initialize 1132 * the transmit buffer descriptors with the physical address 1133 * and size of the mbuf. 1134 */ 1135 for (m = mb_head, segment = 0; m != NULL; m = m->m_next) { 1136 if (m->m_len != 0) { 1137 KKASSERT(segment < FXP_NTXSEG); 1138 1139 txp->tbd[segment].tb_addr = 1140 vtophys(mtod(m, vm_offset_t)); 1141 txp->tbd[segment].tb_size = m->m_len; 1142 segment++; 1143 } 1144 } 1145 KKASSERT(m == NULL); 1146 1147 txp->tbd_number = segment; 1148 txp->mb_head = mb_head; 1149 txp->cb_status = 0; 1150 if (sc->tx_queued != FXP_CXINT_THRESH - 1) { 1151 txp->cb_command = 1152 FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF | 1153 FXP_CB_COMMAND_S; 1154 } else { 1155 txp->cb_command = 1156 FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF | 1157 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I; 1158 } 1159 txp->tx_threshold = tx_threshold; 1160 1161 /* 1162 * Advance the end of list forward. 1163 */ 1164 sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S; 1165 sc->cbl_last = txp; 1166 1167 /* 1168 * Advance the beginning of the list forward if there are 1169 * no other packets queued (when nothing is queued, cbl_first 1170 * sits on the last TxCB that was sent out). 1171 */ 1172 if (sc->tx_queued == 0) 1173 sc->cbl_first = txp; 1174 1175 sc->tx_queued++; 1176 /* 1177 * Set a 5 second timer just in case we don't hear 1178 * from the card again. 1179 */ 1180 ifp->if_timer = 5; 1181 1182 BPF_MTAP(ifp, mb_head); 1183 } 1184 1185 if (sc->tx_queued >= FXP_USABLE_TXCB) 1186 ifp->if_flags |= IFF_OACTIVE; 1187 1188 /* 1189 * We're finished. If we added to the list, issue a RESUME to get DMA 1190 * going again if suspended. 1191 */ 1192 if (txp != NULL) { 1193 fxp_scb_wait(sc); 1194 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); 1195 } 1196 } 1197 1198 #ifdef DEVICE_POLLING 1199 1200 static void 1201 fxp_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 1202 { 1203 struct fxp_softc *sc = ifp->if_softc; 1204 u_int8_t statack; 1205 1206 ASSERT_SERIALIZED(ifp->if_serializer); 1207 1208 switch(cmd) { 1209 case POLL_REGISTER: 1210 /* disable interrupts */ 1211 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE); 1212 break; 1213 case POLL_DEREGISTER: 1214 /* enable interrupts */ 1215 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0); 1216 break; 1217 default: 1218 statack = FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA | 1219 FXP_SCB_STATACK_FR; 1220 if (cmd == POLL_AND_CHECK_STATUS) { 1221 u_int8_t tmp; 1222 1223 tmp = CSR_READ_1(sc, FXP_CSR_SCB_STATACK); 1224 if (tmp == 0xff || tmp == 0) 1225 return; /* nothing to do */ 1226 tmp &= ~statack; 1227 /* ack what we can */ 1228 if (tmp != 0) 1229 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, tmp); 1230 statack |= tmp; 1231 } 1232 fxp_intr_body(sc, statack, count); 1233 break; 1234 } 1235 } 1236 1237 #endif /* DEVICE_POLLING */ 1238 1239 /* 1240 * Process interface interrupts. 1241 */ 1242 static void 1243 fxp_intr(void *xsc) 1244 { 1245 struct fxp_softc *sc = xsc; 1246 u_int8_t statack; 1247 1248 ASSERT_SERIALIZED(sc->arpcom.ac_if.if_serializer); 1249 1250 if (sc->suspended) { 1251 return; 1252 } 1253 1254 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) { 1255 /* 1256 * It should not be possible to have all bits set; the 1257 * FXP_SCB_INTR_SWI bit always returns 0 on a read. If 1258 * all bits are set, this may indicate that the card has 1259 * been physically ejected, so ignore it. 1260 */ 1261 if (statack == 0xff) 1262 return; 1263 1264 /* 1265 * First ACK all the interrupts in this pass. 1266 */ 1267 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1268 fxp_intr_body(sc, statack, -1); 1269 } 1270 } 1271 1272 static void 1273 fxp_intr_body(struct fxp_softc *sc, u_int8_t statack, int count) 1274 { 1275 struct ifnet *ifp = &sc->arpcom.ac_if; 1276 struct mbuf *m; 1277 struct fxp_rfa *rfa; 1278 int rnr = (statack & FXP_SCB_STATACK_RNR) ? 1 : 0; 1279 struct mbuf_chain chain[MAXCPU]; 1280 1281 if (rnr) 1282 fxp_rnr++; 1283 #ifdef DEVICE_POLLING 1284 /* Pick up a deferred RNR condition if `count' ran out last time. */ 1285 if (sc->flags & FXP_FLAG_DEFERRED_RNR) { 1286 sc->flags &= ~FXP_FLAG_DEFERRED_RNR; 1287 rnr = 1; 1288 } 1289 #endif 1290 1291 /* 1292 * Free any finished transmit mbuf chains. 1293 * 1294 * Handle the CNA event likt a CXTNO event. It used to 1295 * be that this event (control unit not ready) was not 1296 * encountered, but it is now with the SMPng modifications. 1297 * The exact sequence of events that occur when the interface 1298 * is brought up are different now, and if this event 1299 * goes unhandled, the configuration/rxfilter setup sequence 1300 * can stall for several seconds. The result is that no 1301 * packets go out onto the wire for about 5 to 10 seconds 1302 * after the interface is ifconfig'ed for the first time. 1303 */ 1304 if (statack & (FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA)) { 1305 struct fxp_cb_tx *txp; 1306 1307 for (txp = sc->cbl_first; sc->tx_queued && 1308 (txp->cb_status & FXP_CB_STATUS_C) != 0; 1309 txp = txp->next) { 1310 if ((m = txp->mb_head) != NULL) { 1311 txp->mb_head = NULL; 1312 sc->tx_queued--; 1313 m_freem(m); 1314 } else { 1315 sc->tx_queued--; 1316 } 1317 } 1318 sc->cbl_first = txp; 1319 1320 if (sc->tx_queued < FXP_USABLE_TXCB) 1321 ifp->if_flags &= ~IFF_OACTIVE; 1322 1323 if (sc->tx_queued == 0) { 1324 ifp->if_timer = 0; 1325 if (sc->need_mcsetup) 1326 fxp_mc_setup(sc); 1327 } 1328 1329 /* 1330 * Try to start more packets transmitting. 1331 */ 1332 if (!ifq_is_empty(&ifp->if_snd)) 1333 if_devstart(ifp); 1334 } 1335 1336 /* 1337 * Just return if nothing happened on the receive side. 1338 */ 1339 if (!rnr && (statack & FXP_SCB_STATACK_FR) == 0) 1340 return; 1341 1342 ether_input_chain_init(chain); 1343 1344 /* 1345 * Process receiver interrupts. If a no-resource (RNR) 1346 * condition exists, get whatever packets we can and 1347 * re-start the receiver. 1348 * 1349 * When using polling, we do not process the list to completion, 1350 * so when we get an RNR interrupt we must defer the restart 1351 * until we hit the last buffer with the C bit set. 1352 * If we run out of cycles and rfa_headm has the C bit set, 1353 * record the pending RNR in the FXP_FLAG_DEFERRED_RNR flag so 1354 * that the info will be used in the subsequent polling cycle. 1355 */ 1356 for (;;) { 1357 m = sc->rfa_headm; 1358 rfa = (struct fxp_rfa *)(m->m_ext.ext_buf + 1359 RFA_ALIGNMENT_FUDGE); 1360 1361 #ifdef DEVICE_POLLING /* loop at most count times if count >=0 */ 1362 if (count >= 0 && count-- == 0) { 1363 if (rnr) { 1364 /* Defer RNR processing until the next time. */ 1365 sc->flags |= FXP_FLAG_DEFERRED_RNR; 1366 rnr = 0; 1367 } 1368 break; 1369 } 1370 #endif /* DEVICE_POLLING */ 1371 1372 if ( (rfa->rfa_status & FXP_RFA_STATUS_C) == 0) 1373 break; 1374 1375 /* 1376 * Remove first packet from the chain. 1377 */ 1378 sc->rfa_headm = m->m_next; 1379 if (sc->rfa_headm == NULL) 1380 sc->rfa_tailm = NULL; 1381 m->m_next = NULL; 1382 1383 /* 1384 * Add a new buffer to the receive chain. 1385 * If this fails, the old buffer is recycled 1386 * instead. 1387 */ 1388 if (fxp_add_rfabuf(sc, m) == 0) { 1389 int total_len; 1390 1391 /* 1392 * Fetch packet length (the top 2 bits of 1393 * actual_size are flags set by the controller 1394 * upon completion), and drop the packet in case 1395 * of bogus length or CRC errors. 1396 */ 1397 total_len = rfa->actual_size & 0x3fff; 1398 if (total_len < sizeof(struct ether_header) || 1399 total_len > MCLBYTES - RFA_ALIGNMENT_FUDGE - 1400 sizeof(struct fxp_rfa) || 1401 (rfa->rfa_status & FXP_RFA_STATUS_CRC)) { 1402 m_freem(m); 1403 continue; 1404 } 1405 m->m_pkthdr.len = m->m_len = total_len; 1406 ether_input_chain(ifp, m, NULL, chain); 1407 } 1408 } 1409 1410 ether_input_dispatch(chain); 1411 1412 if (rnr) { 1413 fxp_scb_wait(sc); 1414 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1415 vtophys(sc->rfa_headm->m_ext.ext_buf) + 1416 RFA_ALIGNMENT_FUDGE); 1417 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1418 } 1419 } 1420 1421 /* 1422 * Update packet in/out/collision statistics. The i82557 doesn't 1423 * allow you to access these counters without doing a fairly 1424 * expensive DMA to get _all_ of the statistics it maintains, so 1425 * we do this operation here only once per second. The statistics 1426 * counters in the kernel are updated from the previous dump-stats 1427 * DMA and then a new dump-stats DMA is started. The on-chip 1428 * counters are zeroed when the DMA completes. If we can't start 1429 * the DMA immediately, we don't wait - we just prepare to read 1430 * them again next time. 1431 */ 1432 static void 1433 fxp_tick(void *xsc) 1434 { 1435 struct fxp_softc *sc = xsc; 1436 struct ifnet *ifp = &sc->arpcom.ac_if; 1437 struct fxp_stats *sp = sc->fxp_stats; 1438 struct fxp_cb_tx *txp; 1439 struct mbuf *m; 1440 1441 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1442 1443 ifp->if_opackets += sp->tx_good; 1444 ifp->if_collisions += sp->tx_total_collisions; 1445 if (sp->rx_good) { 1446 ifp->if_ipackets += sp->rx_good; 1447 sc->rx_idle_secs = 0; 1448 } else { 1449 /* 1450 * Receiver's been idle for another second. 1451 */ 1452 sc->rx_idle_secs++; 1453 } 1454 ifp->if_ierrors += 1455 sp->rx_crc_errors + 1456 sp->rx_alignment_errors + 1457 sp->rx_rnr_errors + 1458 sp->rx_overrun_errors; 1459 /* 1460 * If any transmit underruns occured, bump up the transmit 1461 * threshold by another 512 bytes (64 * 8). 1462 */ 1463 if (sp->tx_underruns) { 1464 ifp->if_oerrors += sp->tx_underruns; 1465 if (tx_threshold < 192) 1466 tx_threshold += 64; 1467 } 1468 1469 /* 1470 * Release any xmit buffers that have completed DMA. This isn't 1471 * strictly necessary to do here, but it's advantagous for mbufs 1472 * with external storage to be released in a timely manner rather 1473 * than being defered for a potentially long time. This limits 1474 * the delay to a maximum of one second. 1475 */ 1476 for (txp = sc->cbl_first; sc->tx_queued && 1477 (txp->cb_status & FXP_CB_STATUS_C) != 0; 1478 txp = txp->next) { 1479 if ((m = txp->mb_head) != NULL) { 1480 txp->mb_head = NULL; 1481 sc->tx_queued--; 1482 m_freem(m); 1483 } else { 1484 sc->tx_queued--; 1485 } 1486 } 1487 sc->cbl_first = txp; 1488 1489 if (sc->tx_queued < FXP_USABLE_TXCB) 1490 ifp->if_flags &= ~IFF_OACTIVE; 1491 if (sc->tx_queued == 0) 1492 ifp->if_timer = 0; 1493 1494 /* 1495 * Try to start more packets transmitting. 1496 */ 1497 if (!ifq_is_empty(&ifp->if_snd)) 1498 if_devstart(ifp); 1499 1500 /* 1501 * If we haven't received any packets in FXP_MAC_RX_IDLE seconds, 1502 * then assume the receiver has locked up and attempt to clear 1503 * the condition by reprogramming the multicast filter. This is 1504 * a work-around for a bug in the 82557 where the receiver locks 1505 * up if it gets certain types of garbage in the syncronization 1506 * bits prior to the packet header. This bug is supposed to only 1507 * occur in 10Mbps mode, but has been seen to occur in 100Mbps 1508 * mode as well (perhaps due to a 10/100 speed transition). 1509 */ 1510 if (sc->rx_idle_secs > FXP_MAX_RX_IDLE) { 1511 sc->rx_idle_secs = 0; 1512 fxp_mc_setup(sc); 1513 } 1514 /* 1515 * If there is no pending command, start another stats 1516 * dump. Otherwise punt for now. 1517 */ 1518 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) { 1519 /* 1520 * Start another stats dump. 1521 */ 1522 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET); 1523 } else { 1524 /* 1525 * A previous command is still waiting to be accepted. 1526 * Just zero our copy of the stats and wait for the 1527 * next timer event to update them. 1528 */ 1529 sp->tx_good = 0; 1530 sp->tx_underruns = 0; 1531 sp->tx_total_collisions = 0; 1532 1533 sp->rx_good = 0; 1534 sp->rx_crc_errors = 0; 1535 sp->rx_alignment_errors = 0; 1536 sp->rx_rnr_errors = 0; 1537 sp->rx_overrun_errors = 0; 1538 } 1539 if (sc->miibus != NULL) 1540 mii_tick(device_get_softc(sc->miibus)); 1541 /* 1542 * Schedule another timeout one second from now. 1543 */ 1544 callout_reset(&sc->fxp_stat_timer, hz, fxp_tick, sc); 1545 1546 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1547 } 1548 1549 /* 1550 * Stop the interface. Cancels the statistics updater and resets 1551 * the interface. 1552 */ 1553 static void 1554 fxp_stop(struct fxp_softc *sc) 1555 { 1556 struct ifnet *ifp = &sc->arpcom.ac_if; 1557 struct fxp_cb_tx *txp; 1558 int i; 1559 1560 ASSERT_SERIALIZED(ifp->if_serializer); 1561 1562 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1563 ifp->if_timer = 0; 1564 1565 /* 1566 * Cancel stats updater. 1567 */ 1568 callout_stop(&sc->fxp_stat_timer); 1569 1570 /* 1571 * Issue software reset, which also unloads the microcode. 1572 */ 1573 sc->flags &= ~FXP_FLAG_UCODE; 1574 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET); 1575 DELAY(50); 1576 1577 /* 1578 * Release any xmit buffers. 1579 */ 1580 txp = sc->cbl_base; 1581 if (txp != NULL) { 1582 for (i = 0; i < FXP_NTXCB; i++) { 1583 if (txp[i].mb_head != NULL) { 1584 m_freem(txp[i].mb_head); 1585 txp[i].mb_head = NULL; 1586 } 1587 } 1588 } 1589 sc->tx_queued = 0; 1590 1591 /* 1592 * Free all the receive buffers then reallocate/reinitialize 1593 */ 1594 if (sc->rfa_headm != NULL) 1595 m_freem(sc->rfa_headm); 1596 sc->rfa_headm = NULL; 1597 sc->rfa_tailm = NULL; 1598 for (i = 0; i < FXP_NRFABUFS; i++) { 1599 if (fxp_add_rfabuf(sc, NULL) != 0) { 1600 /* 1601 * This "can't happen" - we're at splimp() 1602 * and we just freed all the buffers we need 1603 * above. 1604 */ 1605 panic("fxp_stop: no buffers!"); 1606 } 1607 } 1608 } 1609 1610 /* 1611 * Watchdog/transmission transmit timeout handler. Called when a 1612 * transmission is started on the interface, but no interrupt is 1613 * received before the timeout. This usually indicates that the 1614 * card has wedged for some reason. 1615 */ 1616 static void 1617 fxp_watchdog(struct ifnet *ifp) 1618 { 1619 ASSERT_SERIALIZED(ifp->if_serializer); 1620 1621 if_printf(ifp, "device timeout\n"); 1622 ifp->if_oerrors++; 1623 fxp_init(ifp->if_softc); 1624 } 1625 1626 static void 1627 fxp_init(void *xsc) 1628 { 1629 struct fxp_softc *sc = xsc; 1630 struct ifnet *ifp = &sc->arpcom.ac_if; 1631 struct fxp_cb_config *cbp; 1632 struct fxp_cb_ias *cb_ias; 1633 struct fxp_cb_tx *txp; 1634 struct fxp_cb_mcs *mcsp; 1635 int i, prm; 1636 1637 ASSERT_SERIALIZED(ifp->if_serializer); 1638 1639 /* 1640 * Cancel any pending I/O 1641 */ 1642 fxp_stop(sc); 1643 1644 prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; 1645 1646 /* 1647 * Initialize base of CBL and RFA memory. Loading with zero 1648 * sets it up for regular linear addressing. 1649 */ 1650 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0); 1651 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE); 1652 1653 fxp_scb_wait(sc); 1654 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE); 1655 1656 /* 1657 * Initialize base of dump-stats buffer. 1658 */ 1659 fxp_scb_wait(sc); 1660 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(sc->fxp_stats)); 1661 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR); 1662 1663 /* 1664 * Attempt to load microcode if requested. 1665 */ 1666 if (ifp->if_flags & IFF_LINK0 && (sc->flags & FXP_FLAG_UCODE) == 0) 1667 fxp_load_ucode(sc); 1668 1669 /* 1670 * Initialize the multicast address list. 1671 */ 1672 if (fxp_mc_addrs(sc)) { 1673 mcsp = sc->mcsp; 1674 mcsp->cb_status = 0; 1675 mcsp->cb_command = FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL; 1676 mcsp->link_addr = -1; 1677 /* 1678 * Start the multicast setup command. 1679 */ 1680 fxp_scb_wait(sc); 1681 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&mcsp->cb_status)); 1682 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1683 /* ...and wait for it to complete. */ 1684 fxp_dma_wait(&mcsp->cb_status, sc); 1685 } 1686 1687 /* 1688 * We temporarily use memory that contains the TxCB list to 1689 * construct the config CB. The TxCB list memory is rebuilt 1690 * later. 1691 */ 1692 cbp = (struct fxp_cb_config *) sc->cbl_base; 1693 1694 /* 1695 * This bcopy is kind of disgusting, but there are a bunch of must be 1696 * zero and must be one bits in this structure and this is the easiest 1697 * way to initialize them all to proper values. 1698 */ 1699 bcopy(fxp_cb_config_template, 1700 (void *)(uintptr_t)(volatile void *)&cbp->cb_status, 1701 sizeof(fxp_cb_config_template)); 1702 1703 cbp->cb_status = 0; 1704 cbp->cb_command = FXP_CB_COMMAND_CONFIG | FXP_CB_COMMAND_EL; 1705 cbp->link_addr = -1; /* (no) next command */ 1706 cbp->byte_count = 22; /* (22) bytes to config */ 1707 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */ 1708 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */ 1709 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ 1710 cbp->mwi_enable = sc->flags & FXP_FLAG_MWI_ENABLE ? 1 : 0; 1711 cbp->type_enable = 0; /* actually reserved */ 1712 cbp->read_align_en = sc->flags & FXP_FLAG_READ_ALIGN ? 1 : 0; 1713 cbp->end_wr_on_cl = sc->flags & FXP_FLAG_WRITE_ALIGN ? 1 : 0; 1714 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */ 1715 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */ 1716 cbp->dma_mbce = 0; /* (disable) dma max counters */ 1717 cbp->late_scb = 0; /* (don't) defer SCB update */ 1718 cbp->direct_dma_dis = 1; /* disable direct rcv dma mode */ 1719 cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */ 1720 cbp->ci_int = 1; /* interrupt on CU idle */ 1721 cbp->ext_txcb_dis = sc->flags & FXP_FLAG_EXT_TXCB ? 0 : 1; 1722 cbp->ext_stats_dis = 1; /* disable extended counters */ 1723 cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */ 1724 cbp->save_bf = sc->revision == FXP_REV_82557 ? 1 : prm; 1725 cbp->disc_short_rx = !prm; /* discard short packets */ 1726 cbp->underrun_retry = 1; /* retry mode (once) on DMA underrun */ 1727 cbp->two_frames = 0; /* do not limit FIFO to 2 frames */ 1728 cbp->dyn_tbd = 0; /* (no) dynamic TBD mode */ 1729 cbp->mediatype = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 0 : 1; 1730 cbp->csma_dis = 0; /* (don't) disable link */ 1731 cbp->tcp_udp_cksum = 0; /* (don't) enable checksum */ 1732 cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */ 1733 cbp->link_wake_en = 0; /* (don't) assert PME# on link change */ 1734 cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */ 1735 cbp->mc_wake_en = 0; /* (don't) enable PME# on mcmatch */ 1736 cbp->nsai = 1; /* (don't) disable source addr insert */ 1737 cbp->preamble_length = 2; /* (7 byte) preamble */ 1738 cbp->loopback = 0; /* (don't) loopback */ 1739 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ 1740 cbp->linear_pri_mode = 0; /* (wait after xmit only) */ 1741 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ 1742 cbp->promiscuous = prm; /* promiscuous mode */ 1743 cbp->bcast_disable = 0; /* (don't) disable broadcasts */ 1744 cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/ 1745 cbp->ignore_ul = 0; /* consider U/L bit in IA matching */ 1746 cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */ 1747 cbp->crscdt = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 1 : 0; 1748 1749 cbp->stripping = !prm; /* truncate rx packet to byte count */ 1750 cbp->padding = 1; /* (do) pad short tx packets */ 1751 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ 1752 cbp->long_rx_en = sc->flags & FXP_FLAG_LONG_PKT_EN ? 1 : 0; 1753 cbp->ia_wake_en = 0; /* (don't) wake up on address match */ 1754 cbp->magic_pkt_dis = 0; /* (don't) disable magic packet */ 1755 /* must set wake_en in PMCSR also */ 1756 cbp->force_fdx = 0; /* (don't) force full duplex */ 1757 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ 1758 cbp->multi_ia = 0; /* (don't) accept multiple IAs */ 1759 cbp->mc_all = sc->flags & FXP_FLAG_ALL_MCAST ? 1 : 0; 1760 1761 if (sc->revision == FXP_REV_82557) { 1762 /* 1763 * The 82557 has no hardware flow control, the values 1764 * below are the defaults for the chip. 1765 */ 1766 cbp->fc_delay_lsb = 0; 1767 cbp->fc_delay_msb = 0x40; 1768 cbp->pri_fc_thresh = 3; 1769 cbp->tx_fc_dis = 0; 1770 cbp->rx_fc_restop = 0; 1771 cbp->rx_fc_restart = 0; 1772 cbp->fc_filter = 0; 1773 cbp->pri_fc_loc = 1; 1774 } else { 1775 cbp->fc_delay_lsb = 0x1f; 1776 cbp->fc_delay_msb = 0x01; 1777 cbp->pri_fc_thresh = 3; 1778 cbp->tx_fc_dis = 0; /* enable transmit FC */ 1779 cbp->rx_fc_restop = 1; /* enable FC restop frames */ 1780 cbp->rx_fc_restart = 1; /* enable FC restart frames */ 1781 cbp->fc_filter = !prm; /* drop FC frames to host */ 1782 cbp->pri_fc_loc = 1; /* FC pri location (byte31) */ 1783 } 1784 1785 /* 1786 * Start the config command/DMA. 1787 */ 1788 fxp_scb_wait(sc); 1789 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&cbp->cb_status)); 1790 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1791 /* ...and wait for it to complete. */ 1792 fxp_dma_wait(&cbp->cb_status, sc); 1793 1794 /* 1795 * Now initialize the station address. Temporarily use the TxCB 1796 * memory area like we did above for the config CB. 1797 */ 1798 cb_ias = (struct fxp_cb_ias *) sc->cbl_base; 1799 cb_ias->cb_status = 0; 1800 cb_ias->cb_command = FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL; 1801 cb_ias->link_addr = -1; 1802 bcopy(sc->arpcom.ac_enaddr, 1803 (void *)(uintptr_t)(volatile void *)cb_ias->macaddr, 1804 sizeof(sc->arpcom.ac_enaddr)); 1805 1806 /* 1807 * Start the IAS (Individual Address Setup) command/DMA. 1808 */ 1809 fxp_scb_wait(sc); 1810 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1811 /* ...and wait for it to complete. */ 1812 fxp_dma_wait(&cb_ias->cb_status, sc); 1813 1814 /* 1815 * Initialize transmit control block (TxCB) list. 1816 */ 1817 1818 txp = sc->cbl_base; 1819 bzero(txp, sizeof(struct fxp_cb_tx) * FXP_NTXCB); 1820 for (i = 0; i < FXP_NTXCB; i++) { 1821 txp[i].cb_status = FXP_CB_STATUS_C | FXP_CB_STATUS_OK; 1822 txp[i].cb_command = FXP_CB_COMMAND_NOP; 1823 txp[i].link_addr = 1824 vtophys(&txp[(i + 1) & FXP_TXCB_MASK].cb_status); 1825 if (sc->flags & FXP_FLAG_EXT_TXCB) 1826 txp[i].tbd_array_addr = vtophys(&txp[i].tbd[2]); 1827 else 1828 txp[i].tbd_array_addr = vtophys(&txp[i].tbd[0]); 1829 txp[i].next = &txp[(i + 1) & FXP_TXCB_MASK]; 1830 } 1831 /* 1832 * Set the suspend flag on the first TxCB and start the control 1833 * unit. It will execute the NOP and then suspend. 1834 */ 1835 txp->cb_command = FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S; 1836 sc->cbl_first = sc->cbl_last = txp; 1837 sc->tx_queued = 1; 1838 1839 fxp_scb_wait(sc); 1840 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1841 1842 /* 1843 * Initialize receiver buffer area - RFA. 1844 */ 1845 fxp_scb_wait(sc); 1846 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1847 vtophys(sc->rfa_headm->m_ext.ext_buf) + RFA_ALIGNMENT_FUDGE); 1848 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1849 1850 /* 1851 * Set current media. 1852 */ 1853 if (sc->miibus != NULL) 1854 mii_mediachg(device_get_softc(sc->miibus)); 1855 1856 ifp->if_flags |= IFF_RUNNING; 1857 ifp->if_flags &= ~IFF_OACTIVE; 1858 1859 /* 1860 * Enable interrupts. 1861 */ 1862 #ifdef DEVICE_POLLING 1863 /* 1864 * ... but only do that if we are not polling. And because (presumably) 1865 * the default is interrupts on, we need to disable them explicitly! 1866 */ 1867 if ( ifp->if_flags & IFF_POLLING ) 1868 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE); 1869 else 1870 #endif /* DEVICE_POLLING */ 1871 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0); 1872 1873 /* 1874 * Start stats updater. 1875 */ 1876 callout_reset(&sc->fxp_stat_timer, hz, fxp_tick, sc); 1877 } 1878 1879 static int 1880 fxp_serial_ifmedia_upd(struct ifnet *ifp) 1881 { 1882 ASSERT_SERIALIZED(ifp->if_serializer); 1883 return (0); 1884 } 1885 1886 static void 1887 fxp_serial_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1888 { 1889 ASSERT_SERIALIZED(ifp->if_serializer); 1890 ifmr->ifm_active = IFM_ETHER|IFM_MANUAL; 1891 } 1892 1893 /* 1894 * Change media according to request. 1895 */ 1896 static int 1897 fxp_ifmedia_upd(struct ifnet *ifp) 1898 { 1899 struct fxp_softc *sc = ifp->if_softc; 1900 struct mii_data *mii; 1901 1902 ASSERT_SERIALIZED(ifp->if_serializer); 1903 1904 mii = device_get_softc(sc->miibus); 1905 mii_mediachg(mii); 1906 return (0); 1907 } 1908 1909 /* 1910 * Notify the world which media we're using. 1911 */ 1912 static void 1913 fxp_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1914 { 1915 struct fxp_softc *sc = ifp->if_softc; 1916 struct mii_data *mii; 1917 1918 ASSERT_SERIALIZED(ifp->if_serializer); 1919 1920 mii = device_get_softc(sc->miibus); 1921 mii_pollstat(mii); 1922 ifmr->ifm_active = mii->mii_media_active; 1923 ifmr->ifm_status = mii->mii_media_status; 1924 1925 if (ifmr->ifm_status & IFM_10_T && sc->flags & FXP_FLAG_CU_RESUME_BUG) 1926 sc->cu_resume_bug = 1; 1927 else 1928 sc->cu_resume_bug = 0; 1929 } 1930 1931 /* 1932 * Add a buffer to the end of the RFA buffer list. 1933 * Return 0 if successful, 1 for failure. A failure results in 1934 * adding the 'oldm' (if non-NULL) on to the end of the list - 1935 * tossing out its old contents and recycling it. 1936 * The RFA struct is stuck at the beginning of mbuf cluster and the 1937 * data pointer is fixed up to point just past it. 1938 */ 1939 static int 1940 fxp_add_rfabuf(struct fxp_softc *sc, struct mbuf *oldm) 1941 { 1942 u_int32_t v; 1943 struct mbuf *m; 1944 struct fxp_rfa *rfa, *p_rfa; 1945 1946 m = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR); 1947 if (m == NULL) { /* try to recycle the old mbuf instead */ 1948 if (oldm == NULL) 1949 return 1; 1950 m = oldm; 1951 m->m_data = m->m_ext.ext_buf; 1952 } 1953 1954 /* 1955 * Move the data pointer up so that the incoming data packet 1956 * will be 32-bit aligned. 1957 */ 1958 m->m_data += RFA_ALIGNMENT_FUDGE; 1959 1960 /* 1961 * Get a pointer to the base of the mbuf cluster and move 1962 * data start past it. 1963 */ 1964 rfa = mtod(m, struct fxp_rfa *); 1965 m->m_data += sizeof(struct fxp_rfa); 1966 rfa->size = (u_int16_t)(MCLBYTES - sizeof(struct fxp_rfa) - 1967 RFA_ALIGNMENT_FUDGE); 1968 1969 /* 1970 * Initialize the rest of the RFA. Note that since the RFA 1971 * is misaligned, we cannot store values directly. Instead, 1972 * we use an optimized, inline copy. 1973 */ 1974 1975 rfa->rfa_status = 0; 1976 rfa->rfa_control = FXP_RFA_CONTROL_EL; 1977 rfa->actual_size = 0; 1978 1979 v = -1; 1980 fxp_lwcopy(&v, (volatile u_int32_t *) rfa->link_addr); 1981 fxp_lwcopy(&v, (volatile u_int32_t *) rfa->rbd_addr); 1982 1983 /* 1984 * If there are other buffers already on the list, attach this 1985 * one to the end by fixing up the tail to point to this one. 1986 */ 1987 if (sc->rfa_headm != NULL) { 1988 p_rfa = (struct fxp_rfa *)(sc->rfa_tailm->m_ext.ext_buf + 1989 RFA_ALIGNMENT_FUDGE); 1990 sc->rfa_tailm->m_next = m; 1991 v = vtophys(rfa); 1992 fxp_lwcopy(&v, (volatile u_int32_t *) p_rfa->link_addr); 1993 p_rfa->rfa_control = 0; 1994 } else { 1995 sc->rfa_headm = m; 1996 } 1997 sc->rfa_tailm = m; 1998 1999 return (m == oldm); 2000 } 2001 2002 static int 2003 fxp_miibus_readreg(device_t dev, int phy, int reg) 2004 { 2005 struct fxp_softc *sc = device_get_softc(dev); 2006 int count = 10000; 2007 int value; 2008 2009 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2010 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21)); 2011 2012 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 0x10000000) == 0 2013 && count--) 2014 DELAY(10); 2015 2016 if (count <= 0) 2017 device_printf(dev, "fxp_miibus_readreg: timed out\n"); 2018 2019 return (value & 0xffff); 2020 } 2021 2022 static void 2023 fxp_miibus_writereg(device_t dev, int phy, int reg, int value) 2024 { 2025 struct fxp_softc *sc = device_get_softc(dev); 2026 int count = 10000; 2027 2028 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2029 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) | 2030 (value & 0xffff)); 2031 2032 while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 && 2033 count--) 2034 DELAY(10); 2035 2036 if (count <= 0) 2037 device_printf(dev, "fxp_miibus_writereg: timed out\n"); 2038 } 2039 2040 static int 2041 fxp_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 2042 { 2043 struct fxp_softc *sc = ifp->if_softc; 2044 struct ifreq *ifr = (struct ifreq *)data; 2045 struct mii_data *mii; 2046 int error = 0; 2047 2048 ASSERT_SERIALIZED(ifp->if_serializer); 2049 2050 switch (command) { 2051 2052 case SIOCSIFFLAGS: 2053 if (ifp->if_flags & IFF_ALLMULTI) 2054 sc->flags |= FXP_FLAG_ALL_MCAST; 2055 else 2056 sc->flags &= ~FXP_FLAG_ALL_MCAST; 2057 2058 /* 2059 * If interface is marked up and not running, then start it. 2060 * If it is marked down and running, stop it. 2061 * XXX If it's up then re-initialize it. This is so flags 2062 * such as IFF_PROMISC are handled. 2063 */ 2064 if (ifp->if_flags & IFF_UP) { 2065 fxp_init(sc); 2066 } else { 2067 if (ifp->if_flags & IFF_RUNNING) 2068 fxp_stop(sc); 2069 } 2070 break; 2071 2072 case SIOCADDMULTI: 2073 case SIOCDELMULTI: 2074 if (ifp->if_flags & IFF_ALLMULTI) 2075 sc->flags |= FXP_FLAG_ALL_MCAST; 2076 else 2077 sc->flags &= ~FXP_FLAG_ALL_MCAST; 2078 /* 2079 * Multicast list has changed; set the hardware filter 2080 * accordingly. 2081 */ 2082 if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0) 2083 fxp_mc_setup(sc); 2084 /* 2085 * fxp_mc_setup() can set FXP_FLAG_ALL_MCAST, so check it 2086 * again rather than else {}. 2087 */ 2088 if (sc->flags & FXP_FLAG_ALL_MCAST) 2089 fxp_init(sc); 2090 error = 0; 2091 break; 2092 2093 case SIOCSIFMEDIA: 2094 case SIOCGIFMEDIA: 2095 if (sc->miibus != NULL) { 2096 mii = device_get_softc(sc->miibus); 2097 error = ifmedia_ioctl(ifp, ifr, 2098 &mii->mii_media, command); 2099 } else { 2100 error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, command); 2101 } 2102 break; 2103 2104 default: 2105 error = ether_ioctl(ifp, command, data); 2106 break; 2107 } 2108 return (error); 2109 } 2110 2111 /* 2112 * Fill in the multicast address list and return number of entries. 2113 */ 2114 static int 2115 fxp_mc_addrs(struct fxp_softc *sc) 2116 { 2117 struct fxp_cb_mcs *mcsp = sc->mcsp; 2118 struct ifnet *ifp = &sc->arpcom.ac_if; 2119 struct ifmultiaddr *ifma; 2120 int nmcasts; 2121 2122 nmcasts = 0; 2123 if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0) { 2124 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 2125 if (ifma->ifma_addr->sa_family != AF_LINK) 2126 continue; 2127 if (nmcasts >= MAXMCADDR) { 2128 sc->flags |= FXP_FLAG_ALL_MCAST; 2129 nmcasts = 0; 2130 break; 2131 } 2132 bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 2133 (void *)(uintptr_t)(volatile void *) 2134 &sc->mcsp->mc_addr[nmcasts][0], 6); 2135 nmcasts++; 2136 } 2137 } 2138 mcsp->mc_cnt = nmcasts * 6; 2139 return (nmcasts); 2140 } 2141 2142 /* 2143 * Program the multicast filter. 2144 * 2145 * We have an artificial restriction that the multicast setup command 2146 * must be the first command in the chain, so we take steps to ensure 2147 * this. By requiring this, it allows us to keep up the performance of 2148 * the pre-initialized command ring (esp. link pointers) by not actually 2149 * inserting the mcsetup command in the ring - i.e. its link pointer 2150 * points to the TxCB ring, but the mcsetup descriptor itself is not part 2151 * of it. We then can do 'CU_START' on the mcsetup descriptor and have it 2152 * lead into the regular TxCB ring when it completes. 2153 * 2154 * This function must be called at splimp. 2155 */ 2156 static void 2157 fxp_mc_setup(struct fxp_softc *sc) 2158 { 2159 struct fxp_cb_mcs *mcsp = sc->mcsp; 2160 struct ifnet *ifp = &sc->arpcom.ac_if; 2161 int count; 2162 2163 /* 2164 * If there are queued commands, we must wait until they are all 2165 * completed. If we are already waiting, then add a NOP command 2166 * with interrupt option so that we're notified when all commands 2167 * have been completed - fxp_start() ensures that no additional 2168 * TX commands will be added when need_mcsetup is true. 2169 */ 2170 if (sc->tx_queued) { 2171 struct fxp_cb_tx *txp; 2172 2173 /* 2174 * need_mcsetup will be true if we are already waiting for the 2175 * NOP command to be completed (see below). In this case, bail. 2176 */ 2177 if (sc->need_mcsetup) 2178 return; 2179 sc->need_mcsetup = 1; 2180 2181 /* 2182 * Add a NOP command with interrupt so that we are notified 2183 * when all TX commands have been processed. 2184 */ 2185 txp = sc->cbl_last->next; 2186 txp->mb_head = NULL; 2187 txp->cb_status = 0; 2188 txp->cb_command = FXP_CB_COMMAND_NOP | 2189 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I; 2190 /* 2191 * Advance the end of list forward. 2192 */ 2193 sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S; 2194 sc->cbl_last = txp; 2195 sc->tx_queued++; 2196 /* 2197 * Issue a resume in case the CU has just suspended. 2198 */ 2199 fxp_scb_wait(sc); 2200 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); 2201 /* 2202 * Set a 5 second timer just in case we don't hear from the 2203 * card again. 2204 */ 2205 ifp->if_timer = 5; 2206 2207 return; 2208 } 2209 sc->need_mcsetup = 0; 2210 2211 /* 2212 * Initialize multicast setup descriptor. 2213 */ 2214 mcsp->next = sc->cbl_base; 2215 mcsp->mb_head = NULL; 2216 mcsp->cb_status = 0; 2217 mcsp->cb_command = FXP_CB_COMMAND_MCAS | 2218 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I; 2219 mcsp->link_addr = vtophys(&sc->cbl_base->cb_status); 2220 fxp_mc_addrs(sc); 2221 sc->cbl_first = sc->cbl_last = (struct fxp_cb_tx *) mcsp; 2222 sc->tx_queued = 1; 2223 2224 /* 2225 * Wait until command unit is not active. This should never 2226 * be the case when nothing is queued, but make sure anyway. 2227 */ 2228 count = 100; 2229 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) == 2230 FXP_SCB_CUS_ACTIVE && --count) 2231 DELAY(10); 2232 if (count == 0) { 2233 if_printf(&sc->arpcom.ac_if, "command queue timeout\n"); 2234 return; 2235 } 2236 2237 /* 2238 * Start the multicast setup command. 2239 */ 2240 fxp_scb_wait(sc); 2241 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&mcsp->cb_status)); 2242 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2243 2244 ifp->if_timer = 2; 2245 return; 2246 } 2247 2248 static u_int32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE; 2249 static u_int32_t fxp_ucode_d101b0[] = D101_B0_RCVBUNDLE_UCODE; 2250 static u_int32_t fxp_ucode_d101ma[] = D101M_B_RCVBUNDLE_UCODE; 2251 static u_int32_t fxp_ucode_d101s[] = D101S_RCVBUNDLE_UCODE; 2252 static u_int32_t fxp_ucode_d102[] = D102_B_RCVBUNDLE_UCODE; 2253 static u_int32_t fxp_ucode_d102c[] = D102_C_RCVBUNDLE_UCODE; 2254 2255 #define UCODE(x) x, sizeof(x) 2256 2257 struct ucode { 2258 u_int32_t revision; 2259 u_int32_t *ucode; 2260 int length; 2261 u_short int_delay_offset; 2262 u_short bundle_max_offset; 2263 } ucode_table[] = { 2264 { FXP_REV_82558_A4, UCODE(fxp_ucode_d101a), D101_CPUSAVER_DWORD, 0 }, 2265 { FXP_REV_82558_B0, UCODE(fxp_ucode_d101b0), D101_CPUSAVER_DWORD, 0 }, 2266 { FXP_REV_82559_A0, UCODE(fxp_ucode_d101ma), 2267 D101M_CPUSAVER_DWORD, D101M_CPUSAVER_BUNDLE_MAX_DWORD }, 2268 { FXP_REV_82559S_A, UCODE(fxp_ucode_d101s), 2269 D101S_CPUSAVER_DWORD, D101S_CPUSAVER_BUNDLE_MAX_DWORD }, 2270 { FXP_REV_82550, UCODE(fxp_ucode_d102), 2271 D102_B_CPUSAVER_DWORD, D102_B_CPUSAVER_BUNDLE_MAX_DWORD }, 2272 { FXP_REV_82550_C, UCODE(fxp_ucode_d102c), 2273 D102_C_CPUSAVER_DWORD, D102_C_CPUSAVER_BUNDLE_MAX_DWORD }, 2274 { 0, NULL, 0, 0, 0 } 2275 }; 2276 2277 static void 2278 fxp_load_ucode(struct fxp_softc *sc) 2279 { 2280 struct ucode *uc; 2281 struct fxp_cb_ucode *cbp; 2282 2283 for (uc = ucode_table; uc->ucode != NULL; uc++) 2284 if (sc->revision == uc->revision) 2285 break; 2286 if (uc->ucode == NULL) 2287 return; 2288 cbp = (struct fxp_cb_ucode *)sc->cbl_base; 2289 cbp->cb_status = 0; 2290 cbp->cb_command = FXP_CB_COMMAND_UCODE | FXP_CB_COMMAND_EL; 2291 cbp->link_addr = -1; /* (no) next command */ 2292 memcpy(cbp->ucode, uc->ucode, uc->length); 2293 if (uc->int_delay_offset) 2294 *(u_short *)&cbp->ucode[uc->int_delay_offset] = 2295 sc->tunable_int_delay + sc->tunable_int_delay / 2; 2296 if (uc->bundle_max_offset) 2297 *(u_short *)&cbp->ucode[uc->bundle_max_offset] = 2298 sc->tunable_bundle_max; 2299 /* 2300 * Download the ucode to the chip. 2301 */ 2302 fxp_scb_wait(sc); 2303 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&cbp->cb_status)); 2304 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2305 /* ...and wait for it to complete. */ 2306 fxp_dma_wait(&cbp->cb_status, sc); 2307 if_printf(&sc->arpcom.ac_if, 2308 "Microcode loaded, int_delay: %d usec bundle_max: %d\n", 2309 sc->tunable_int_delay, 2310 uc->bundle_max_offset == 0 ? 0 : sc->tunable_bundle_max); 2311 sc->flags |= FXP_FLAG_UCODE; 2312 } 2313 2314 /* 2315 * Interrupt delay is expressed in microseconds, a multiplier is used 2316 * to convert this to the appropriate clock ticks before using. 2317 */ 2318 static int 2319 sysctl_hw_fxp_int_delay(SYSCTL_HANDLER_ARGS) 2320 { 2321 return (sysctl_int_range(oidp, arg1, arg2, req, 300, 3000)); 2322 } 2323 2324 static int 2325 sysctl_hw_fxp_bundle_max(SYSCTL_HANDLER_ARGS) 2326 { 2327 return (sysctl_int_range(oidp, arg1, arg2, req, 1, 0xffff)); 2328 } 2329