1 /****************************************************************************** 2 3 Copyright (c) 2001-2012, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD:$*/ 34 35 #include "e1000_api.h" 36 37 /** 38 * e1000_calculate_checksum - Calculate checksum for buffer 39 * @buffer: pointer to EEPROM 40 * @length: size of EEPROM to calculate a checksum for 41 * 42 * Calculates the checksum for some buffer on a specified length. The 43 * checksum calculated is returned. 44 **/ 45 u8 e1000_calculate_checksum(u8 *buffer, u32 length) 46 { 47 u32 i; 48 u8 sum = 0; 49 50 DEBUGFUNC("e1000_calculate_checksum"); 51 52 if (!buffer) 53 return 0; 54 55 for (i = 0; i < length; i++) 56 sum += buffer[i]; 57 58 return (u8) (0 - sum); 59 } 60 61 /** 62 * e1000_mng_enable_host_if_generic - Checks host interface is enabled 63 * @hw: pointer to the HW structure 64 * 65 * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND 66 * 67 * This function checks whether the HOST IF is enabled for command operation 68 * and also checks whether the previous command is completed. It busy waits 69 * in case of previous command is not completed. 70 **/ 71 s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw) 72 { 73 u32 hicr; 74 u8 i; 75 76 DEBUGFUNC("e1000_mng_enable_host_if_generic"); 77 78 if (!hw->mac.arc_subsystem_valid) { 79 DEBUGOUT("ARC subsystem not valid.\n"); 80 return -E1000_ERR_HOST_INTERFACE_COMMAND; 81 } 82 83 /* Check that the host interface is enabled. */ 84 hicr = E1000_READ_REG(hw, E1000_HICR); 85 if (!(hicr & E1000_HICR_EN)) { 86 DEBUGOUT("E1000_HOST_EN bit disabled.\n"); 87 return -E1000_ERR_HOST_INTERFACE_COMMAND; 88 } 89 /* check the previous command is completed */ 90 for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { 91 hicr = E1000_READ_REG(hw, E1000_HICR); 92 if (!(hicr & E1000_HICR_C)) 93 break; 94 msec_delay_irq(1); 95 } 96 97 if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { 98 DEBUGOUT("Previous command timeout failed .\n"); 99 return -E1000_ERR_HOST_INTERFACE_COMMAND; 100 } 101 102 return E1000_SUCCESS; 103 } 104 105 /** 106 * e1000_check_mng_mode_generic - Generic check management mode 107 * @hw: pointer to the HW structure 108 * 109 * Reads the firmware semaphore register and returns TRUE (>0) if 110 * manageability is enabled, else FALSE (0). 111 **/ 112 bool e1000_check_mng_mode_generic(struct e1000_hw *hw) 113 { 114 u32 fwsm = E1000_READ_REG(hw, E1000_FWSM); 115 116 DEBUGFUNC("e1000_check_mng_mode_generic"); 117 118 119 return (fwsm & E1000_FWSM_MODE_MASK) == 120 (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); 121 } 122 123 /** 124 * e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx 125 * @hw: pointer to the HW structure 126 * 127 * Enables packet filtering on transmit packets if manageability is enabled 128 * and host interface is enabled. 129 **/ 130 bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) 131 { 132 struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; 133 u32 *buffer = (u32 *)&hw->mng_cookie; 134 u32 offset; 135 s32 ret_val, hdr_csum, csum; 136 u8 i, len; 137 138 DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic"); 139 140 hw->mac.tx_pkt_filtering = TRUE; 141 142 /* No manageability, no filtering */ 143 if (!hw->mac.ops.check_mng_mode(hw)) { 144 hw->mac.tx_pkt_filtering = FALSE; 145 return hw->mac.tx_pkt_filtering; 146 } 147 148 /* If we can't read from the host interface for whatever 149 * reason, disable filtering. 150 */ 151 ret_val = e1000_mng_enable_host_if_generic(hw); 152 if (ret_val != E1000_SUCCESS) { 153 hw->mac.tx_pkt_filtering = FALSE; 154 return hw->mac.tx_pkt_filtering; 155 } 156 157 /* Read in the header. Length and offset are in dwords. */ 158 len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; 159 offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; 160 for (i = 0; i < len; i++) 161 *(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, 162 offset + i); 163 hdr_csum = hdr->checksum; 164 hdr->checksum = 0; 165 csum = e1000_calculate_checksum((u8 *)hdr, 166 E1000_MNG_DHCP_COOKIE_LENGTH); 167 /* If either the checksums or signature don't match, then 168 * the cookie area isn't considered valid, in which case we 169 * take the safe route of assuming Tx filtering is enabled. 170 */ 171 if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { 172 hw->mac.tx_pkt_filtering = TRUE; 173 return hw->mac.tx_pkt_filtering; 174 } 175 176 /* Cookie area is valid, make the final check for filtering. */ 177 if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) 178 hw->mac.tx_pkt_filtering = FALSE; 179 180 return hw->mac.tx_pkt_filtering; 181 } 182 183 /** 184 * e1000_mng_write_cmd_header_generic - Writes manageability command header 185 * @hw: pointer to the HW structure 186 * @hdr: pointer to the host interface command header 187 * 188 * Writes the command header after does the checksum calculation. 189 **/ 190 s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, 191 struct e1000_host_mng_command_header *hdr) 192 { 193 u16 i, length = sizeof(struct e1000_host_mng_command_header); 194 195 DEBUGFUNC("e1000_mng_write_cmd_header_generic"); 196 197 /* Write the whole command header structure with new checksum. */ 198 199 hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); 200 201 length >>= 2; 202 /* Write the relevant command block into the ram area. */ 203 for (i = 0; i < length; i++) { 204 E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, 205 *((u32 *) hdr + i)); 206 E1000_WRITE_FLUSH(hw); 207 } 208 209 return E1000_SUCCESS; 210 } 211 212 /** 213 * e1000_mng_host_if_write_generic - Write to the manageability host interface 214 * @hw: pointer to the HW structure 215 * @buffer: pointer to the host interface buffer 216 * @length: size of the buffer 217 * @offset: location in the buffer to write to 218 * @sum: sum of the data (not checksum) 219 * 220 * This function writes the buffer content at the offset given on the host if. 221 * It also does alignment considerations to do the writes in most efficient 222 * way. Also fills up the sum of the buffer in *buffer parameter. 223 **/ 224 s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, 225 u16 length, u16 offset, u8 *sum) 226 { 227 u8 *tmp; 228 u8 *bufptr = buffer; 229 u32 data = 0; 230 u16 remaining, i, j, prev_bytes; 231 232 DEBUGFUNC("e1000_mng_host_if_write_generic"); 233 234 /* sum = only sum of the data and it is not checksum */ 235 236 if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) 237 return -E1000_ERR_PARAM; 238 239 tmp = (u8 *)&data; 240 prev_bytes = offset & 0x3; 241 offset >>= 2; 242 243 if (prev_bytes) { 244 data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset); 245 for (j = prev_bytes; j < sizeof(u32); j++) { 246 *(tmp + j) = *bufptr++; 247 *sum += *(tmp + j); 248 } 249 E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data); 250 length -= j - prev_bytes; 251 offset++; 252 } 253 254 remaining = length & 0x3; 255 length -= remaining; 256 257 /* Calculate length in DWORDs */ 258 length >>= 2; 259 260 /* The device driver writes the relevant command block into the 261 * ram area. 262 */ 263 for (i = 0; i < length; i++) { 264 for (j = 0; j < sizeof(u32); j++) { 265 *(tmp + j) = *bufptr++; 266 *sum += *(tmp + j); 267 } 268 269 E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, 270 data); 271 } 272 if (remaining) { 273 for (j = 0; j < sizeof(u32); j++) { 274 if (j < remaining) 275 *(tmp + j) = *bufptr++; 276 else 277 *(tmp + j) = 0; 278 279 *sum += *(tmp + j); 280 } 281 E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, 282 data); 283 } 284 285 return E1000_SUCCESS; 286 } 287 288 /** 289 * e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface 290 * @hw: pointer to the HW structure 291 * @buffer: pointer to the host interface 292 * @length: size of the buffer 293 * 294 * Writes the DHCP information to the host interface. 295 **/ 296 s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer, 297 u16 length) 298 { 299 struct e1000_host_mng_command_header hdr; 300 s32 ret_val; 301 u32 hicr; 302 303 DEBUGFUNC("e1000_mng_write_dhcp_info_generic"); 304 305 hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; 306 hdr.command_length = length; 307 hdr.reserved1 = 0; 308 hdr.reserved2 = 0; 309 hdr.checksum = 0; 310 311 /* Enable the host interface */ 312 ret_val = e1000_mng_enable_host_if_generic(hw); 313 if (ret_val) 314 return ret_val; 315 316 /* Populate the host interface with the contents of "buffer". */ 317 ret_val = e1000_mng_host_if_write_generic(hw, buffer, length, 318 sizeof(hdr), &(hdr.checksum)); 319 if (ret_val) 320 return ret_val; 321 322 /* Write the manageability command header */ 323 ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr); 324 if (ret_val) 325 return ret_val; 326 327 /* Tell the ARC a new command is pending. */ 328 hicr = E1000_READ_REG(hw, E1000_HICR); 329 E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); 330 331 return E1000_SUCCESS; 332 } 333 334 /** 335 * e1000_enable_mng_pass_thru - Check if management passthrough is needed 336 * @hw: pointer to the HW structure 337 * 338 * Verifies the hardware needs to leave interface enabled so that frames can 339 * be directed to and from the management interface. 340 **/ 341 bool e1000_enable_mng_pass_thru(struct e1000_hw *hw) 342 { 343 u32 manc; 344 u32 fwsm, factps; 345 346 DEBUGFUNC("e1000_enable_mng_pass_thru"); 347 348 if (!hw->mac.asf_firmware_present) 349 return FALSE; 350 351 manc = E1000_READ_REG(hw, E1000_MANC); 352 353 if (!(manc & E1000_MANC_RCV_TCO_EN)) 354 return FALSE; 355 356 if (hw->mac.has_fwsm) { 357 fwsm = E1000_READ_REG(hw, E1000_FWSM); 358 factps = E1000_READ_REG(hw, E1000_FACTPS); 359 360 if (!(factps & E1000_FACTPS_MNGCG) && 361 ((fwsm & E1000_FWSM_MODE_MASK) == 362 (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) 363 return TRUE; 364 } else if ((hw->mac.type == e1000_82574) || 365 (hw->mac.type == e1000_82583)) { 366 u16 data; 367 368 factps = E1000_READ_REG(hw, E1000_FACTPS); 369 e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); 370 371 if (!(factps & E1000_FACTPS_MNGCG) && 372 ((data & E1000_NVM_INIT_CTRL2_MNGM) == 373 (e1000_mng_mode_pt << 13))) 374 return TRUE; 375 } else if ((manc & E1000_MANC_SMBUS_EN) && 376 !(manc & E1000_MANC_ASF_EN)) { 377 return TRUE; 378 } 379 380 return FALSE; 381 } 382 383 /** 384 * e1000_host_interface_command - Writes buffer to host interface 385 * @hw: pointer to the HW structure 386 * @buffer: contains a command to write 387 * @length: the byte length of the buffer, must be multiple of 4 bytes 388 * 389 * Writes a buffer to the Host Interface. Upon success, returns E1000_SUCCESS 390 * else returns E1000_ERR_HOST_INTERFACE_COMMAND. 391 **/ 392 s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) 393 { 394 u32 hicr, i; 395 396 DEBUGFUNC("e1000_host_interface_command"); 397 398 if (!(hw->mac.arc_subsystem_valid)) { 399 DEBUGOUT("Hardware doesn't support host interface command.\n"); 400 return E1000_SUCCESS; 401 } 402 403 if (!hw->mac.asf_firmware_present) { 404 DEBUGOUT("Firmware is not present.\n"); 405 return E1000_SUCCESS; 406 } 407 408 if (length == 0 || length & 0x3 || 409 length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) { 410 DEBUGOUT("Buffer length failure.\n"); 411 return -E1000_ERR_HOST_INTERFACE_COMMAND; 412 } 413 414 /* Check that the host interface is enabled. */ 415 hicr = E1000_READ_REG(hw, E1000_HICR); 416 if (!(hicr & E1000_HICR_EN)) { 417 DEBUGOUT("E1000_HOST_EN bit disabled.\n"); 418 return -E1000_ERR_HOST_INTERFACE_COMMAND; 419 } 420 421 /* Calculate length in DWORDs */ 422 length >>= 2; 423 424 /* The device driver writes the relevant command block 425 * into the ram area. 426 */ 427 for (i = 0; i < length; i++) 428 E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, 429 *((u32 *)buffer + i)); 430 431 /* Setting this bit tells the ARC that a new command is pending. */ 432 E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); 433 434 for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { 435 hicr = E1000_READ_REG(hw, E1000_HICR); 436 if (!(hicr & E1000_HICR_C)) 437 break; 438 msec_delay(1); 439 } 440 441 /* Check command successful completion. */ 442 if (i == E1000_HI_COMMAND_TIMEOUT || 443 (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) { 444 DEBUGOUT("Command has failed with no status valid.\n"); 445 return -E1000_ERR_HOST_INTERFACE_COMMAND; 446 } 447 448 for (i = 0; i < length; i++) 449 *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, 450 E1000_HOST_IF, 451 i); 452 453 return E1000_SUCCESS; 454 } 455 /** 456 * e1000_load_firmware - Writes proxy FW code buffer to host interface 457 * and execute. 458 * @hw: pointer to the HW structure 459 * @buffer: contains a firmware to write 460 * @length: the byte length of the buffer, must be multiple of 4 bytes 461 * 462 * Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled 463 * in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND. 464 **/ 465 s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length) 466 { 467 u32 hicr, hibba, fwsm, icr, i; 468 469 DEBUGFUNC("e1000_load_firmware"); 470 471 if (hw->mac.type < e1000_i210) { 472 DEBUGOUT("Hardware doesn't support loading FW by the driver\n"); 473 return -E1000_ERR_CONFIG; 474 } 475 476 /* Check that the host interface is enabled. */ 477 hicr = E1000_READ_REG(hw, E1000_HICR); 478 if (!(hicr & E1000_HICR_EN)) { 479 DEBUGOUT("E1000_HOST_EN bit disabled.\n"); 480 return -E1000_ERR_CONFIG; 481 } 482 if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) { 483 DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n"); 484 return -E1000_ERR_CONFIG; 485 } 486 487 if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) { 488 DEBUGOUT("Buffer length failure.\n"); 489 return -E1000_ERR_INVALID_ARGUMENT; 490 } 491 492 /* Clear notification from ROM-FW by reading ICR register */ 493 icr = E1000_READ_REG(hw, E1000_ICR_V2); 494 495 /* Reset ROM-FW */ 496 hicr = E1000_READ_REG(hw, E1000_HICR); 497 hicr |= E1000_HICR_FW_RESET_ENABLE; 498 E1000_WRITE_REG(hw, E1000_HICR, hicr); 499 hicr |= E1000_HICR_FW_RESET; 500 E1000_WRITE_REG(hw, E1000_HICR, hicr); 501 E1000_WRITE_FLUSH(hw); 502 503 /* Wait till MAC notifies about its readiness after ROM-FW reset */ 504 for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) { 505 icr = E1000_READ_REG(hw, E1000_ICR_V2); 506 if (icr & E1000_ICR_MNG) 507 break; 508 msec_delay(1); 509 } 510 511 /* Check for timeout */ 512 if (i == E1000_HI_COMMAND_TIMEOUT) { 513 DEBUGOUT("FW reset failed.\n"); 514 return -E1000_ERR_HOST_INTERFACE_COMMAND; 515 } 516 517 /* Wait till MAC is ready to accept new FW code */ 518 for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { 519 fwsm = E1000_READ_REG(hw, E1000_FWSM); 520 if ((fwsm & E1000_FWSM_FW_VALID) && 521 ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT == 522 E1000_FWSM_HI_EN_ONLY_MODE)) 523 break; 524 msec_delay(1); 525 } 526 527 /* Check for timeout */ 528 if (i == E1000_HI_COMMAND_TIMEOUT) { 529 DEBUGOUT("FW reset failed.\n"); 530 return -E1000_ERR_HOST_INTERFACE_COMMAND; 531 } 532 533 /* Calculate length in DWORDs */ 534 length >>= 2; 535 536 /* The device driver writes the relevant FW code block 537 * into the ram area in DWORDs via 1kB ram addressing window. 538 */ 539 for (i = 0; i < length; i++) { 540 if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) { 541 /* Point to correct 1kB ram window */ 542 hibba = E1000_HI_FW_BASE_ADDRESS + 543 ((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) * 544 (i / E1000_HI_FW_BLOCK_DWORD_LENGTH)); 545 546 E1000_WRITE_REG(hw, E1000_HIBBA, hibba); 547 } 548 549 E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, 550 i % E1000_HI_FW_BLOCK_DWORD_LENGTH, 551 *((u32 *)buffer + i)); 552 } 553 554 /* Setting this bit tells the ARC that a new FW is ready to execute. */ 555 hicr = E1000_READ_REG(hw, E1000_HICR); 556 E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); 557 558 for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { 559 hicr = E1000_READ_REG(hw, E1000_HICR); 560 if (!(hicr & E1000_HICR_C)) 561 break; 562 msec_delay(1); 563 } 564 565 /* Check for successful FW start. */ 566 if (i == E1000_HI_COMMAND_TIMEOUT) { 567 DEBUGOUT("New FW did not start within timeout period.\n"); 568 return -E1000_ERR_HOST_INTERFACE_COMMAND; 569 } 570 571 return E1000_SUCCESS; 572 } 573 574 575