1 /*- 2 * Copyright (c) 2007-2009 Damien Bergamini <damien.bergamini@free.fr> 3 * Copyright (c) 2008 Benjamin Close <benjsc@FreeBSD.org> 4 * Copyright (c) 2008 Sam Leffler, Errno Consulting 5 * Copyright (c) 2011 Intel Corporation 6 * Copyright (c) 2013 Cedric GROSS <c.gross@kreiz-it.fr> 7 * Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org> 8 * 9 * Permission to use, copy, modify, and distribute this software for any 10 * purpose with or without fee is hereby granted, provided that the above 11 * copyright notice and this permission notice appear in all copies. 12 * 13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 20 */ 21 22 /* 23 * Driver for Intel WiFi Link 4965 and 1000/5000/6000 Series 802.11 network 24 * adapters. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include "opt_wlan.h" 31 #include "opt_iwn.h" 32 33 #include <sys/param.h> 34 #include <sys/sockio.h> 35 #include <sys/sysctl.h> 36 #include <sys/mbuf.h> 37 #include <sys/kernel.h> 38 #include <sys/socket.h> 39 #include <sys/systm.h> 40 #include <sys/malloc.h> 41 #include <sys/bus.h> 42 #include <sys/rman.h> 43 #include <sys/endian.h> 44 #include <sys/firmware.h> 45 #include <sys/limits.h> 46 #include <sys/module.h> 47 #include <sys/queue.h> 48 #include <sys/taskqueue.h> 49 #include <sys/stdbool.h> 50 51 #include <machine/clock.h> 52 53 #include <bus/pci/pcireg.h> 54 #include <bus/pci/pcivar.h> 55 56 #include <net/bpf.h> 57 #include <net/if.h> 58 #include <net/if_var.h> 59 #include <net/if_arp.h> 60 #include <net/ethernet.h> 61 #include <net/if_dl.h> 62 #include <net/if_media.h> 63 #include <net/if_types.h> 64 #include <net/ifq_var.h> 65 66 #include <netinet/in.h> 67 #include <netinet/in_systm.h> 68 #include <netinet/in_var.h> 69 #include <netinet/if_ether.h> 70 #include <netinet/ip.h> 71 72 #include <netproto/802_11/ieee80211_var.h> 73 #include <netproto/802_11/ieee80211_radiotap.h> 74 #include <netproto/802_11/ieee80211_regdomain.h> 75 #include <netproto/802_11/ieee80211_ratectl.h> 76 77 #include <dev/netif/iwn/if_iwnreg.h> 78 #include <dev/netif/iwn/if_iwnvar.h> 79 #include <dev/netif/iwn/if_iwn_devid.h> 80 #include <dev/netif/iwn/if_iwn_chip_cfg.h> 81 #include <dev/netif/iwn/if_iwn_debug.h> 82 #include <dev/netif/iwn/if_iwn_ioctl.h> 83 84 struct iwn_ident { 85 uint16_t vendor; 86 uint16_t device; 87 const char *name; 88 }; 89 90 static const struct iwn_ident iwn_ident_table[] = { 91 { 0x8086, IWN_DID_6x05_1, "Intel Centrino Advanced-N 6205" }, 92 { 0x8086, IWN_DID_1000_1, "Intel Centrino Wireless-N 1000" }, 93 { 0x8086, IWN_DID_1000_2, "Intel Centrino Wireless-N 1000" }, 94 { 0x8086, IWN_DID_6x05_2, "Intel Centrino Advanced-N 6205" }, 95 { 0x8086, IWN_DID_6050_1, "Intel Centrino Advanced-N + WiMAX 6250" }, 96 { 0x8086, IWN_DID_6050_2, "Intel Centrino Advanced-N + WiMAX 6250" }, 97 { 0x8086, IWN_DID_x030_1, "Intel Centrino Wireless-N 1030" }, 98 { 0x8086, IWN_DID_x030_2, "Intel Centrino Wireless-N 1030" }, 99 { 0x8086, IWN_DID_x030_3, "Intel Centrino Advanced-N 6230" }, 100 { 0x8086, IWN_DID_x030_4, "Intel Centrino Advanced-N 6230" }, 101 { 0x8086, IWN_DID_6150_1, "Intel Centrino Wireless-N + WiMAX 6150" }, 102 { 0x8086, IWN_DID_6150_2, "Intel Centrino Wireless-N + WiMAX 6150" }, 103 { 0x8086, IWN_DID_2x00_1, "Intel(R) Centrino(R) Wireless-N 2200 BGN" }, 104 { 0x8086, IWN_DID_2x00_2, "Intel(R) Centrino(R) Wireless-N 2200 BGN" }, 105 /* XXX 2200D is IWN_SDID_2x00_4; there's no way to express this here! */ 106 { 0x8086, IWN_DID_2x30_1, "Intel Centrino Wireless-N 2230" }, 107 { 0x8086, IWN_DID_2x30_2, "Intel Centrino Wireless-N 2230" }, 108 { 0x8086, IWN_DID_130_1, "Intel Centrino Wireless-N 130" }, 109 { 0x8086, IWN_DID_130_2, "Intel Centrino Wireless-N 130" }, 110 { 0x8086, IWN_DID_100_1, "Intel Centrino Wireless-N 100" }, 111 { 0x8086, IWN_DID_100_2, "Intel Centrino Wireless-N 100" }, 112 { 0x8086, IWN_DID_105_1, "Intel Centrino Wireless-N 105" }, 113 { 0x8086, IWN_DID_105_2, "Intel Centrino Wireless-N 105" }, 114 { 0x8086, IWN_DID_135_1, "Intel Centrino Wireless-N 135" }, 115 { 0x8086, IWN_DID_135_2, "Intel Centrino Wireless-N 135" }, 116 { 0x8086, IWN_DID_4965_1, "Intel Wireless WiFi Link 4965" }, 117 { 0x8086, IWN_DID_6x00_1, "Intel Centrino Ultimate-N 6300" }, 118 { 0x8086, IWN_DID_6x00_2, "Intel Centrino Advanced-N 6200" }, 119 { 0x8086, IWN_DID_4965_2, "Intel Wireless WiFi Link 4965" }, 120 { 0x8086, IWN_DID_4965_3, "Intel Wireless WiFi Link 4965" }, 121 { 0x8086, IWN_DID_5x00_1, "Intel WiFi Link 5100" }, 122 { 0x8086, IWN_DID_4965_4, "Intel Wireless WiFi Link 4965" }, 123 { 0x8086, IWN_DID_5x00_3, "Intel Ultimate N WiFi Link 5300" }, 124 { 0x8086, IWN_DID_5x00_4, "Intel Ultimate N WiFi Link 5300" }, 125 { 0x8086, IWN_DID_5x00_2, "Intel WiFi Link 5100" }, 126 { 0x8086, IWN_DID_6x00_3, "Intel Centrino Ultimate-N 6300" }, 127 { 0x8086, IWN_DID_6x00_4, "Intel Centrino Advanced-N 6200" }, 128 { 0x8086, IWN_DID_5x50_1, "Intel WiMAX/WiFi Link 5350" }, 129 { 0x8086, IWN_DID_5x50_2, "Intel WiMAX/WiFi Link 5350" }, 130 { 0x8086, IWN_DID_5x50_3, "Intel WiMAX/WiFi Link 5150" }, 131 { 0x8086, IWN_DID_5x50_4, "Intel WiMAX/WiFi Link 5150" }, 132 { 0x8086, IWN_DID_6035_1, "Intel Centrino Advanced 6235" }, 133 { 0x8086, IWN_DID_6035_2, "Intel Centrino Advanced 6235" }, 134 { 0, 0, NULL } 135 }; 136 137 static int iwn_probe(device_t); 138 static int iwn_attach(device_t); 139 static int iwn4965_attach(struct iwn_softc *, uint16_t); 140 static int iwn5000_attach(struct iwn_softc *, uint16_t); 141 static int iwn_config_specific(struct iwn_softc *, uint16_t); 142 static void iwn_radiotap_attach(struct iwn_softc *); 143 static void iwn_sysctlattach(struct iwn_softc *); 144 static struct ieee80211vap *iwn_vap_create(struct ieee80211com *, 145 const char [IFNAMSIZ], int, enum ieee80211_opmode, int, 146 const uint8_t [IEEE80211_ADDR_LEN], 147 const uint8_t [IEEE80211_ADDR_LEN]); 148 static void iwn_vap_delete(struct ieee80211vap *); 149 static int iwn_detach(device_t); 150 static int iwn_shutdown(device_t); 151 static int iwn_suspend(device_t); 152 static int iwn_resume(device_t); 153 static int iwn_nic_lock(struct iwn_softc *); 154 static int iwn_eeprom_lock(struct iwn_softc *); 155 static int iwn_init_otprom(struct iwn_softc *); 156 static int iwn_read_prom_data(struct iwn_softc *, uint32_t, void *, int); 157 static void iwn_dma_map_addr(void *, bus_dma_segment_t *, int, int); 158 static int iwn_dma_contig_alloc(struct iwn_softc *, struct iwn_dma_info *, 159 void **, bus_size_t, bus_size_t); 160 static void iwn_dma_contig_free(struct iwn_dma_info *); 161 static int iwn_alloc_sched(struct iwn_softc *); 162 static void iwn_free_sched(struct iwn_softc *); 163 static int iwn_alloc_kw(struct iwn_softc *); 164 static void iwn_free_kw(struct iwn_softc *); 165 static int iwn_alloc_ict(struct iwn_softc *); 166 static void iwn_free_ict(struct iwn_softc *); 167 static int iwn_alloc_fwmem(struct iwn_softc *); 168 static void iwn_free_fwmem(struct iwn_softc *); 169 static int iwn_alloc_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 170 static void iwn_reset_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 171 static void iwn_free_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 172 static int iwn_alloc_tx_ring(struct iwn_softc *, struct iwn_tx_ring *, 173 int); 174 static void iwn_reset_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 175 static void iwn_free_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 176 static void iwn5000_ict_reset(struct iwn_softc *); 177 static int iwn_read_eeprom(struct iwn_softc *, 178 uint8_t macaddr[IEEE80211_ADDR_LEN]); 179 static void iwn4965_read_eeprom(struct iwn_softc *); 180 #ifdef IWN_DEBUG 181 static void iwn4965_print_power_group(struct iwn_softc *, int); 182 #endif 183 static void iwn5000_read_eeprom(struct iwn_softc *); 184 static uint32_t iwn_eeprom_channel_flags(struct iwn_eeprom_chan *); 185 static void iwn_read_eeprom_band(struct iwn_softc *, int); 186 static void iwn_read_eeprom_ht40(struct iwn_softc *, int); 187 static void iwn_read_eeprom_channels(struct iwn_softc *, int, uint32_t); 188 static struct iwn_eeprom_chan *iwn_find_eeprom_channel(struct iwn_softc *, 189 struct ieee80211_channel *); 190 static int iwn_setregdomain(struct ieee80211com *, 191 struct ieee80211_regdomain *, int, 192 struct ieee80211_channel[]); 193 static void iwn_read_eeprom_enhinfo(struct iwn_softc *); 194 static struct ieee80211_node *iwn_node_alloc(struct ieee80211vap *, 195 const uint8_t mac[IEEE80211_ADDR_LEN]); 196 static void iwn_newassoc(struct ieee80211_node *, int); 197 static int iwn_media_change(struct ifnet *); 198 static int iwn_newstate(struct ieee80211vap *, enum ieee80211_state, int); 199 static void iwn_calib_timeout(void *); 200 static void iwn_rx_phy(struct iwn_softc *, struct iwn_rx_desc *, 201 struct iwn_rx_data *); 202 static void iwn_rx_done(struct iwn_softc *, struct iwn_rx_desc *, 203 struct iwn_rx_data *); 204 static void iwn_rx_compressed_ba(struct iwn_softc *, struct iwn_rx_desc *, 205 struct iwn_rx_data *); 206 static void iwn5000_rx_calib_results(struct iwn_softc *, 207 struct iwn_rx_desc *, struct iwn_rx_data *); 208 static void iwn_rx_statistics(struct iwn_softc *, struct iwn_rx_desc *, 209 struct iwn_rx_data *); 210 static void iwn4965_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 211 struct iwn_rx_data *); 212 static void iwn5000_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 213 struct iwn_rx_data *); 214 static void iwn_tx_done(struct iwn_softc *, struct iwn_rx_desc *, int, 215 uint8_t); 216 static void iwn_ampdu_tx_done(struct iwn_softc *, int, int, int, int, void *); 217 static void iwn_cmd_done(struct iwn_softc *, struct iwn_rx_desc *); 218 static void iwn_notif_intr(struct iwn_softc *); 219 static void iwn_wakeup_intr(struct iwn_softc *); 220 static void iwn_rftoggle_intr(struct iwn_softc *); 221 static void iwn_fatal_intr(struct iwn_softc *); 222 static void iwn_intr(void *); 223 static void iwn4965_update_sched(struct iwn_softc *, int, int, uint8_t, 224 uint16_t); 225 static void iwn5000_update_sched(struct iwn_softc *, int, int, uint8_t, 226 uint16_t); 227 #ifdef notyet 228 static void iwn5000_reset_sched(struct iwn_softc *, int, int); 229 #endif 230 static int iwn_tx_data(struct iwn_softc *, struct mbuf *, 231 struct ieee80211_node *); 232 static int iwn_tx_data_raw(struct iwn_softc *, struct mbuf *, 233 struct ieee80211_node *, 234 const struct ieee80211_bpf_params *params); 235 static int iwn_raw_xmit(struct ieee80211_node *, struct mbuf *, 236 const struct ieee80211_bpf_params *); 237 #if defined(__DragonFly__) 238 static void iwn_start(struct ifnet *, struct ifaltq_subque *); 239 #else 240 static void iwn_start(struct ifnet *); 241 #endif 242 static void iwn_start_locked(struct ifnet *); 243 static void iwn_watchdog(void *); 244 #if defined(__DragonFly__) 245 static int iwn_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 246 #else 247 static int iwn_ioctl(struct ifnet *, u_long, caddr_t); 248 #endif 249 static int iwn_cmd(struct iwn_softc *, int, const void *, int, int); 250 static int iwn4965_add_node(struct iwn_softc *, struct iwn_node_info *, 251 int); 252 static int iwn5000_add_node(struct iwn_softc *, struct iwn_node_info *, 253 int); 254 static int iwn_set_link_quality(struct iwn_softc *, 255 struct ieee80211_node *); 256 static int iwn_add_broadcast_node(struct iwn_softc *, int); 257 static int iwn_updateedca(struct ieee80211com *); 258 static void iwn_update_mcast(struct ifnet *); 259 static void iwn_set_led(struct iwn_softc *, uint8_t, uint8_t, uint8_t); 260 static int iwn_set_critical_temp(struct iwn_softc *); 261 static int iwn_set_timing(struct iwn_softc *, struct ieee80211_node *); 262 static void iwn4965_power_calibration(struct iwn_softc *, int); 263 static int iwn4965_set_txpower(struct iwn_softc *, 264 struct ieee80211_channel *, int); 265 static int iwn5000_set_txpower(struct iwn_softc *, 266 struct ieee80211_channel *, int); 267 static int iwn4965_get_rssi(struct iwn_softc *, struct iwn_rx_stat *); 268 static int iwn5000_get_rssi(struct iwn_softc *, struct iwn_rx_stat *); 269 static int iwn_get_noise(const struct iwn_rx_general_stats *); 270 static int iwn4965_get_temperature(struct iwn_softc *); 271 static int iwn5000_get_temperature(struct iwn_softc *); 272 static int iwn_init_sensitivity(struct iwn_softc *); 273 static void iwn_collect_noise(struct iwn_softc *, 274 const struct iwn_rx_general_stats *); 275 static int iwn4965_init_gains(struct iwn_softc *); 276 static int iwn5000_init_gains(struct iwn_softc *); 277 static int iwn4965_set_gains(struct iwn_softc *); 278 static int iwn5000_set_gains(struct iwn_softc *); 279 static void iwn_tune_sensitivity(struct iwn_softc *, 280 const struct iwn_rx_stats *); 281 static void iwn_save_stats_counters(struct iwn_softc *, 282 const struct iwn_stats *); 283 static int iwn_send_sensitivity(struct iwn_softc *); 284 static void iwn_check_rx_recovery(struct iwn_softc *, struct iwn_stats *); 285 static int iwn_set_pslevel(struct iwn_softc *, int, int, int); 286 static int iwn_send_btcoex(struct iwn_softc *); 287 static int iwn_send_advanced_btcoex(struct iwn_softc *); 288 static int iwn5000_runtime_calib(struct iwn_softc *); 289 static int iwn_config(struct iwn_softc *); 290 static int iwn_scan(struct iwn_softc *, struct ieee80211vap *, 291 struct ieee80211_scan_state *, struct ieee80211_channel *); 292 static int iwn_auth(struct iwn_softc *, struct ieee80211vap *vap); 293 static int iwn_run(struct iwn_softc *, struct ieee80211vap *vap); 294 static int iwn_ampdu_rx_start(struct ieee80211_node *, 295 struct ieee80211_rx_ampdu *, int, int, int); 296 static void iwn_ampdu_rx_stop(struct ieee80211_node *, 297 struct ieee80211_rx_ampdu *); 298 static int iwn_addba_request(struct ieee80211_node *, 299 struct ieee80211_tx_ampdu *, int, int, int); 300 static int iwn_addba_response(struct ieee80211_node *, 301 struct ieee80211_tx_ampdu *, int, int, int); 302 static int iwn_ampdu_tx_start(struct ieee80211com *, 303 struct ieee80211_node *, uint8_t); 304 static void iwn_ampdu_tx_stop(struct ieee80211_node *, 305 struct ieee80211_tx_ampdu *); 306 static void iwn4965_ampdu_tx_start(struct iwn_softc *, 307 struct ieee80211_node *, int, uint8_t, uint16_t); 308 static void iwn4965_ampdu_tx_stop(struct iwn_softc *, int, 309 uint8_t, uint16_t); 310 static void iwn5000_ampdu_tx_start(struct iwn_softc *, 311 struct ieee80211_node *, int, uint8_t, uint16_t); 312 static void iwn5000_ampdu_tx_stop(struct iwn_softc *, int, 313 uint8_t, uint16_t); 314 static int iwn5000_query_calibration(struct iwn_softc *); 315 static int iwn5000_send_calibration(struct iwn_softc *); 316 static int iwn5000_send_wimax_coex(struct iwn_softc *); 317 static int iwn5000_crystal_calib(struct iwn_softc *); 318 static int iwn5000_temp_offset_calib(struct iwn_softc *); 319 static int iwn5000_temp_offset_calibv2(struct iwn_softc *); 320 static int iwn4965_post_alive(struct iwn_softc *); 321 static int iwn5000_post_alive(struct iwn_softc *); 322 static int iwn4965_load_bootcode(struct iwn_softc *, const uint8_t *, 323 int); 324 static int iwn4965_load_firmware(struct iwn_softc *); 325 static int iwn5000_load_firmware_section(struct iwn_softc *, uint32_t, 326 const uint8_t *, int); 327 static int iwn5000_load_firmware(struct iwn_softc *); 328 static int iwn_read_firmware_leg(struct iwn_softc *, 329 struct iwn_fw_info *); 330 static int iwn_read_firmware_tlv(struct iwn_softc *, 331 struct iwn_fw_info *, uint16_t); 332 static int iwn_read_firmware(struct iwn_softc *); 333 static int iwn_clock_wait(struct iwn_softc *); 334 static int iwn_apm_init(struct iwn_softc *); 335 static void iwn_apm_stop_master(struct iwn_softc *); 336 static void iwn_apm_stop(struct iwn_softc *); 337 static int iwn4965_nic_config(struct iwn_softc *); 338 static int iwn5000_nic_config(struct iwn_softc *); 339 static int iwn_hw_prepare(struct iwn_softc *); 340 static int iwn_hw_init(struct iwn_softc *); 341 static void iwn_hw_stop(struct iwn_softc *); 342 static void iwn_radio_on(void *, int); 343 static void iwn_radio_off(void *, int); 344 static void iwn_panicked(void *, int); 345 static void iwn_init_locked(struct iwn_softc *); 346 static void iwn_init(void *); 347 static void iwn_stop_locked(struct iwn_softc *); 348 static void iwn_stop(struct iwn_softc *); 349 static void iwn_scan_start(struct ieee80211com *); 350 static void iwn_scan_end(struct ieee80211com *); 351 static void iwn_set_channel(struct ieee80211com *); 352 static void iwn_scan_curchan(struct ieee80211_scan_state *, unsigned long); 353 static void iwn_scan_mindwell(struct ieee80211_scan_state *); 354 static void iwn_hw_reset(void *, int); 355 #ifdef IWN_DEBUG 356 static char *iwn_get_csr_string(int); 357 static void iwn_debug_register(struct iwn_softc *); 358 #endif 359 static int iwn_sleep(struct iwn_softc *sc, void *wchan, 360 int flags, const char *wmsg, int timo); 361 362 static device_method_t iwn_methods[] = { 363 /* Device interface */ 364 DEVMETHOD(device_probe, iwn_probe), 365 DEVMETHOD(device_attach, iwn_attach), 366 DEVMETHOD(device_detach, iwn_detach), 367 DEVMETHOD(device_shutdown, iwn_shutdown), 368 DEVMETHOD(device_suspend, iwn_suspend), 369 DEVMETHOD(device_resume, iwn_resume), 370 371 DEVMETHOD_END 372 }; 373 374 static driver_t iwn_driver = { 375 "iwn", 376 iwn_methods, 377 sizeof(struct iwn_softc) 378 }; 379 static devclass_t iwn_devclass; 380 381 DRIVER_MODULE(iwn, pci, iwn_driver, iwn_devclass, NULL, NULL); 382 383 MODULE_VERSION(iwn, 1); 384 385 MODULE_DEPEND(iwn, firmware, 1, 1, 1); 386 MODULE_DEPEND(iwn, pci, 1, 1, 1); 387 MODULE_DEPEND(iwn, wlan, 1, 1, 1); 388 389 static int 390 iwn_probe(device_t dev) 391 { 392 const struct iwn_ident *ident; 393 394 for (ident = iwn_ident_table; ident->name != NULL; ident++) { 395 if (pci_get_vendor(dev) == ident->vendor && 396 pci_get_device(dev) == ident->device) { 397 device_set_desc(dev, ident->name); 398 return (BUS_PROBE_DEFAULT); 399 } 400 } 401 return ENXIO; 402 } 403 404 static int 405 iwn_is_3stream_device(struct iwn_softc *sc) 406 { 407 /* XXX for now only 5300, until the 5350 can be tested */ 408 if (sc->hw_type == IWN_HW_REV_TYPE_5300) 409 return (1); 410 return (0); 411 } 412 413 static int 414 iwn_attach(device_t dev) 415 { 416 struct iwn_softc *sc = (struct iwn_softc *)device_get_softc(dev); 417 struct ieee80211com *ic; 418 struct ifnet *ifp; 419 int i, error, rid; 420 uint8_t macaddr[IEEE80211_ADDR_LEN]; 421 char ethstr[ETHER_ADDRSTRLEN + 1]; 422 423 wlan_serialize_enter(); 424 425 sc->sc_dev = dev; 426 427 #ifdef IWN_DEBUG 428 error = resource_int_value(device_get_name(sc->sc_dev), 429 device_get_unit(sc->sc_dev), "debug", &(sc->sc_debug)); 430 if (error != 0) 431 sc->sc_debug = 0; 432 #else 433 sc->sc_debug = 0; 434 #endif 435 436 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: begin\n",__func__); 437 438 /* 439 * Get the offset of the PCI Express Capability Structure in PCI 440 * Configuration Space. 441 */ 442 #if defined(__DragonFly__) 443 error = pci_find_extcap(dev, PCIY_EXPRESS, &sc->sc_cap_off); 444 #else 445 error = pci_find_cap(dev, PCIY_EXPRESS, &sc->sc_cap_off); 446 #endif 447 if (error != 0) { 448 device_printf(dev, "PCIe capability structure not found!\n"); 449 wlan_serialize_exit(); 450 return error; 451 } 452 453 /* Clear device-specific "PCI retry timeout" register (41h). */ 454 pci_write_config(dev, 0x41, 0, 1); 455 456 /* Enable bus-mastering. */ 457 pci_enable_busmaster(dev); 458 459 rid = PCIR_BAR(0); 460 sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 461 RF_ACTIVE); 462 if (sc->mem == NULL) { 463 device_printf(dev, "can't map mem space\n"); 464 error = ENOMEM; 465 wlan_serialize_exit(); 466 return error; 467 } 468 sc->sc_st = rman_get_bustag(sc->mem); 469 sc->sc_sh = rman_get_bushandle(sc->mem); 470 471 rid = 0; 472 #ifdef OLD_MSI 473 i = 1; 474 if (pci_alloc_msi(dev, &i) == 0) 475 rid = 1; 476 #endif 477 /* Install interrupt handler. */ 478 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE | 479 (rid != 0 ? 0 : RF_SHAREABLE)); 480 if (sc->irq == NULL) { 481 device_printf(dev, "can't map interrupt\n"); 482 error = ENOMEM; 483 goto fail; 484 } 485 486 IWN_LOCK_INIT(sc); 487 488 /* Read hardware revision and attach. */ 489 sc->hw_type = (IWN_READ(sc, IWN_HW_REV) >> IWN_HW_REV_TYPE_SHIFT) 490 & IWN_HW_REV_TYPE_MASK; 491 sc->subdevice_id = pci_get_subdevice(dev); 492 493 /* 494 * 4965 versus 5000 and later have different methods. 495 * Let's set those up first. 496 */ 497 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 498 error = iwn4965_attach(sc, pci_get_device(dev)); 499 else 500 error = iwn5000_attach(sc, pci_get_device(dev)); 501 if (error != 0) { 502 device_printf(dev, "could not attach device, error %d\n", 503 error); 504 goto fail; 505 } 506 507 /* 508 * Next, let's setup the various parameters of each NIC. 509 */ 510 error = iwn_config_specific(sc, pci_get_device(dev)); 511 if (error != 0) { 512 device_printf(dev, "could not attach device, error %d\n", 513 error); 514 goto fail; 515 } 516 517 if ((error = iwn_hw_prepare(sc)) != 0) { 518 device_printf(dev, "hardware not ready, error %d\n", error); 519 goto fail; 520 } 521 522 /* Allocate DMA memory for firmware transfers. */ 523 if ((error = iwn_alloc_fwmem(sc)) != 0) { 524 device_printf(dev, 525 "could not allocate memory for firmware, error %d\n", 526 error); 527 goto fail; 528 } 529 530 /* Allocate "Keep Warm" page. */ 531 if ((error = iwn_alloc_kw(sc)) != 0) { 532 device_printf(dev, 533 "could not allocate keep warm page, error %d\n", error); 534 goto fail; 535 } 536 537 /* Allocate ICT table for 5000 Series. */ 538 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 539 (error = iwn_alloc_ict(sc)) != 0) { 540 device_printf(dev, "could not allocate ICT table, error %d\n", 541 error); 542 goto fail; 543 } 544 545 /* Allocate TX scheduler "rings". */ 546 if ((error = iwn_alloc_sched(sc)) != 0) { 547 device_printf(dev, 548 "could not allocate TX scheduler rings, error %d\n", error); 549 goto fail; 550 } 551 552 /* Allocate TX rings (16 on 4965AGN, 20 on >=5000). */ 553 for (i = 0; i < sc->ntxqs; i++) { 554 if ((error = iwn_alloc_tx_ring(sc, &sc->txq[i], i)) != 0) { 555 device_printf(dev, 556 "could not allocate TX ring %d, error %d\n", i, 557 error); 558 goto fail; 559 } 560 } 561 562 /* Allocate RX ring. */ 563 if ((error = iwn_alloc_rx_ring(sc, &sc->rxq)) != 0) { 564 device_printf(dev, "could not allocate RX ring, error %d\n", 565 error); 566 goto fail; 567 } 568 569 /* Clear pending interrupts. */ 570 IWN_WRITE(sc, IWN_INT, 0xffffffff); 571 572 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); 573 if (ifp == NULL) { 574 device_printf(dev, "can not allocate ifnet structure\n"); 575 goto fail; 576 } 577 578 ic = ifp->if_l2com; 579 ic->ic_ifp = ifp; 580 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 581 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 582 583 /* Set device capabilities. */ 584 ic->ic_caps = 585 IEEE80211_C_STA /* station mode supported */ 586 | IEEE80211_C_MONITOR /* monitor mode supported */ 587 | IEEE80211_C_BGSCAN /* background scanning */ 588 | IEEE80211_C_TXPMGT /* tx power management */ 589 | IEEE80211_C_SHSLOT /* short slot time supported */ 590 | IEEE80211_C_WPA 591 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 592 #if 0 593 | IEEE80211_C_IBSS /* ibss/adhoc mode */ 594 #endif 595 | IEEE80211_C_WME /* WME */ 596 | IEEE80211_C_PMGT /* Station-side power mgmt */ 597 ; 598 599 /* Read MAC address, channels, etc from EEPROM. */ 600 if ((error = iwn_read_eeprom(sc, macaddr)) != 0) { 601 device_printf(dev, "could not read EEPROM, error %d\n", 602 error); 603 goto fail; 604 } 605 606 /* Count the number of available chains. */ 607 sc->ntxchains = 608 ((sc->txchainmask >> 2) & 1) + 609 ((sc->txchainmask >> 1) & 1) + 610 ((sc->txchainmask >> 0) & 1); 611 sc->nrxchains = 612 ((sc->rxchainmask >> 2) & 1) + 613 ((sc->rxchainmask >> 1) & 1) + 614 ((sc->rxchainmask >> 0) & 1); 615 if (bootverbose) { 616 device_printf(dev, "MIMO %dT%dR, %.4s, address %s\n", 617 sc->ntxchains, sc->nrxchains, sc->eeprom_domain, 618 kether_ntoa(macaddr, ethstr)); 619 } 620 621 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 622 ic->ic_rxstream = sc->nrxchains; 623 ic->ic_txstream = sc->ntxchains; 624 625 /* 626 * Some of the 3 antenna devices (ie, the 4965) only supports 627 * 2x2 operation. So correct the number of streams if 628 * it's not a 3-stream device. 629 */ 630 if (! iwn_is_3stream_device(sc)) { 631 if (ic->ic_rxstream > 2) 632 ic->ic_rxstream = 2; 633 if (ic->ic_txstream > 2) 634 ic->ic_txstream = 2; 635 } 636 637 ic->ic_htcaps = 638 IEEE80211_HTCAP_SMPS_OFF /* SMPS mode disabled */ 639 | IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */ 640 | IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width*/ 641 | IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */ 642 #ifdef notyet 643 | IEEE80211_HTCAP_GREENFIELD 644 #if IWN_RBUF_SIZE == 8192 645 | IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */ 646 #else 647 | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */ 648 #endif 649 #endif 650 /* s/w capabilities */ 651 | IEEE80211_HTC_HT /* HT operation */ 652 | IEEE80211_HTC_AMPDU /* tx A-MPDU */ 653 #ifdef notyet 654 | IEEE80211_HTC_AMSDU /* tx A-MSDU */ 655 #endif 656 ; 657 } 658 659 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 660 ifp->if_softc = sc; 661 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 662 ifp->if_init = iwn_init; 663 ifp->if_ioctl = iwn_ioctl; 664 ifp->if_start = iwn_start; 665 #if defined(__DragonFly__) 666 ifq_set_maxlen(&ifp->if_snd, ifqmaxlen); 667 #else 668 IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); 669 ifp->if_snd.ifq_drv_maxlen = ifqmaxlen; 670 IFQ_SET_READY(&ifp->if_snd); 671 #endif 672 673 ieee80211_ifattach(ic, macaddr); 674 ic->ic_vap_create = iwn_vap_create; 675 ic->ic_vap_delete = iwn_vap_delete; 676 ic->ic_raw_xmit = iwn_raw_xmit; 677 ic->ic_node_alloc = iwn_node_alloc; 678 sc->sc_ampdu_rx_start = ic->ic_ampdu_rx_start; 679 ic->ic_ampdu_rx_start = iwn_ampdu_rx_start; 680 sc->sc_ampdu_rx_stop = ic->ic_ampdu_rx_stop; 681 ic->ic_ampdu_rx_stop = iwn_ampdu_rx_stop; 682 sc->sc_addba_request = ic->ic_addba_request; 683 ic->ic_addba_request = iwn_addba_request; 684 sc->sc_addba_response = ic->ic_addba_response; 685 ic->ic_addba_response = iwn_addba_response; 686 sc->sc_addba_stop = ic->ic_addba_stop; 687 ic->ic_addba_stop = iwn_ampdu_tx_stop; 688 ic->ic_newassoc = iwn_newassoc; 689 ic->ic_wme.wme_update = iwn_updateedca; 690 ic->ic_update_mcast = iwn_update_mcast; 691 ic->ic_scan_start = iwn_scan_start; 692 ic->ic_scan_end = iwn_scan_end; 693 ic->ic_set_channel = iwn_set_channel; 694 ic->ic_scan_curchan = iwn_scan_curchan; 695 ic->ic_scan_mindwell = iwn_scan_mindwell; 696 ic->ic_setregdomain = iwn_setregdomain; 697 698 iwn_radiotap_attach(sc); 699 700 callout_init_mtx(&sc->calib_to, &sc->sc_mtx, 0); 701 callout_init_mtx(&sc->watchdog_to, &sc->sc_mtx, 0); 702 TASK_INIT(&sc->sc_reinit_task, 0, iwn_hw_reset, sc); 703 TASK_INIT(&sc->sc_radioon_task, 0, iwn_radio_on, sc); 704 TASK_INIT(&sc->sc_radiooff_task, 0, iwn_radio_off, sc); 705 TASK_INIT(&sc->sc_panic_task, 0, iwn_panicked, sc); 706 707 sc->sc_tq = taskqueue_create("iwn_taskq", M_WAITOK, 708 taskqueue_thread_enqueue, &sc->sc_tq); 709 #if defined(__DragonFly__) 710 error = taskqueue_start_threads(&sc->sc_tq, 1, TDPRI_KERN_DAEMON, 711 -1, "iwn_taskq"); 712 #else 713 error = taskqueue_start_threads(&sc->sc_tq, 1, 0, "iwn_taskq"); 714 #endif 715 if (error != 0) { 716 device_printf(dev, "can't start threads, error %d\n", error); 717 goto fail; 718 } 719 720 iwn_sysctlattach(sc); 721 722 /* 723 * Hook our interrupt after all initialization is complete. 724 */ 725 #if defined(__DragonFly__) 726 error = bus_setup_intr(dev, sc->irq, INTR_MPSAFE, 727 iwn_intr, sc, &sc->sc_ih, 728 &wlan_global_serializer); 729 #else 730 error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE, 731 NULL, iwn_intr, sc, &sc->sc_ih); 732 #endif 733 if (error != 0) { 734 device_printf(dev, "can't establish interrupt, error %d\n", 735 error); 736 goto fail; 737 } 738 739 #if 0 740 device_printf(sc->sc_dev, "%s: rx_stats=%d, rx_stats_bt=%d\n", 741 __func__, 742 sizeof(struct iwn_stats), 743 sizeof(struct iwn_stats_bt)); 744 #endif 745 746 if (bootverbose) 747 ieee80211_announce(ic); 748 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 749 wlan_serialize_exit(); 750 return 0; 751 fail: 752 wlan_serialize_exit(); 753 iwn_detach(dev); 754 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 755 return error; 756 } 757 758 /* 759 * Define specific configuration based on device id and subdevice id 760 * pid : PCI device id 761 */ 762 static int 763 iwn_config_specific(struct iwn_softc *sc, uint16_t pid) 764 { 765 766 switch (pid) { 767 /* 4965 series */ 768 case IWN_DID_4965_1: 769 case IWN_DID_4965_2: 770 case IWN_DID_4965_3: 771 case IWN_DID_4965_4: 772 sc->base_params = &iwn4965_base_params; 773 sc->limits = &iwn4965_sensitivity_limits; 774 sc->fwname = "iwn4965fw"; 775 /* Override chains masks, ROM is known to be broken. */ 776 sc->txchainmask = IWN_ANT_AB; 777 sc->rxchainmask = IWN_ANT_ABC; 778 /* Enable normal btcoex */ 779 sc->sc_flags |= IWN_FLAG_BTCOEX; 780 break; 781 /* 1000 Series */ 782 case IWN_DID_1000_1: 783 case IWN_DID_1000_2: 784 switch(sc->subdevice_id) { 785 case IWN_SDID_1000_1: 786 case IWN_SDID_1000_2: 787 case IWN_SDID_1000_3: 788 case IWN_SDID_1000_4: 789 case IWN_SDID_1000_5: 790 case IWN_SDID_1000_6: 791 case IWN_SDID_1000_7: 792 case IWN_SDID_1000_8: 793 case IWN_SDID_1000_9: 794 case IWN_SDID_1000_10: 795 case IWN_SDID_1000_11: 796 case IWN_SDID_1000_12: 797 sc->limits = &iwn1000_sensitivity_limits; 798 sc->base_params = &iwn1000_base_params; 799 sc->fwname = "iwn1000fw"; 800 break; 801 default: 802 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 803 "0x%04x rev %d not supported (subdevice)\n", pid, 804 sc->subdevice_id,sc->hw_type); 805 return ENOTSUP; 806 } 807 break; 808 /* 6x00 Series */ 809 case IWN_DID_6x00_2: 810 case IWN_DID_6x00_4: 811 case IWN_DID_6x00_1: 812 case IWN_DID_6x00_3: 813 sc->fwname = "iwn6000fw"; 814 sc->limits = &iwn6000_sensitivity_limits; 815 switch(sc->subdevice_id) { 816 case IWN_SDID_6x00_1: 817 case IWN_SDID_6x00_2: 818 case IWN_SDID_6x00_8: 819 //iwl6000_3agn_cfg 820 sc->base_params = &iwn_6000_base_params; 821 break; 822 case IWN_SDID_6x00_3: 823 case IWN_SDID_6x00_6: 824 case IWN_SDID_6x00_9: 825 ////iwl6000i_2agn 826 case IWN_SDID_6x00_4: 827 case IWN_SDID_6x00_7: 828 case IWN_SDID_6x00_10: 829 //iwl6000i_2abg_cfg 830 case IWN_SDID_6x00_5: 831 //iwl6000i_2bg_cfg 832 sc->base_params = &iwn_6000i_base_params; 833 sc->sc_flags |= IWN_FLAG_INTERNAL_PA; 834 sc->txchainmask = IWN_ANT_BC; 835 sc->rxchainmask = IWN_ANT_BC; 836 break; 837 default: 838 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 839 "0x%04x rev %d not supported (subdevice)\n", pid, 840 sc->subdevice_id,sc->hw_type); 841 return ENOTSUP; 842 } 843 break; 844 /* 6x05 Series */ 845 case IWN_DID_6x05_1: 846 case IWN_DID_6x05_2: 847 switch(sc->subdevice_id) { 848 case IWN_SDID_6x05_1: 849 case IWN_SDID_6x05_4: 850 case IWN_SDID_6x05_6: 851 //iwl6005_2agn_cfg 852 case IWN_SDID_6x05_2: 853 case IWN_SDID_6x05_5: 854 case IWN_SDID_6x05_7: 855 //iwl6005_2abg_cfg 856 case IWN_SDID_6x05_3: 857 //iwl6005_2bg_cfg 858 case IWN_SDID_6x05_8: 859 case IWN_SDID_6x05_9: 860 //iwl6005_2agn_sff_cfg 861 case IWN_SDID_6x05_10: 862 //iwl6005_2agn_d_cfg 863 case IWN_SDID_6x05_11: 864 //iwl6005_2agn_mow1_cfg 865 case IWN_SDID_6x05_12: 866 //iwl6005_2agn_mow2_cfg 867 sc->fwname = "iwn6000g2afw"; 868 sc->limits = &iwn6000_sensitivity_limits; 869 sc->base_params = &iwn_6000g2_base_params; 870 break; 871 default: 872 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 873 "0x%04x rev %d not supported (subdevice)\n", pid, 874 sc->subdevice_id,sc->hw_type); 875 return ENOTSUP; 876 } 877 break; 878 /* 6x35 Series */ 879 case IWN_DID_6035_1: 880 case IWN_DID_6035_2: 881 switch(sc->subdevice_id) { 882 case IWN_SDID_6035_1: 883 case IWN_SDID_6035_2: 884 case IWN_SDID_6035_3: 885 case IWN_SDID_6035_4: 886 sc->fwname = "iwn6000g2bfw"; 887 sc->limits = &iwn6235_sensitivity_limits; 888 sc->base_params = &iwn_6235_base_params; 889 break; 890 default: 891 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 892 "0x%04x rev %d not supported (subdevice)\n", pid, 893 sc->subdevice_id,sc->hw_type); 894 return ENOTSUP; 895 } 896 break; 897 /* 6x50 WiFi/WiMax Series */ 898 case IWN_DID_6050_1: 899 case IWN_DID_6050_2: 900 switch(sc->subdevice_id) { 901 case IWN_SDID_6050_1: 902 case IWN_SDID_6050_3: 903 case IWN_SDID_6050_5: 904 //iwl6050_2agn_cfg 905 case IWN_SDID_6050_2: 906 case IWN_SDID_6050_4: 907 case IWN_SDID_6050_6: 908 //iwl6050_2abg_cfg 909 sc->fwname = "iwn6050fw"; 910 sc->txchainmask = IWN_ANT_AB; 911 sc->rxchainmask = IWN_ANT_AB; 912 sc->limits = &iwn6000_sensitivity_limits; 913 sc->base_params = &iwn_6050_base_params; 914 break; 915 default: 916 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 917 "0x%04x rev %d not supported (subdevice)\n", pid, 918 sc->subdevice_id,sc->hw_type); 919 return ENOTSUP; 920 } 921 break; 922 /* 6150 WiFi/WiMax Series */ 923 case IWN_DID_6150_1: 924 case IWN_DID_6150_2: 925 switch(sc->subdevice_id) { 926 case IWN_SDID_6150_1: 927 case IWN_SDID_6150_3: 928 case IWN_SDID_6150_5: 929 // iwl6150_bgn_cfg 930 case IWN_SDID_6150_2: 931 case IWN_SDID_6150_4: 932 case IWN_SDID_6150_6: 933 //iwl6150_bg_cfg 934 sc->fwname = "iwn6050fw"; 935 sc->limits = &iwn6000_sensitivity_limits; 936 sc->base_params = &iwn_6150_base_params; 937 break; 938 default: 939 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 940 "0x%04x rev %d not supported (subdevice)\n", pid, 941 sc->subdevice_id,sc->hw_type); 942 return ENOTSUP; 943 } 944 break; 945 /* 6030 Series and 1030 Series */ 946 case IWN_DID_x030_1: 947 case IWN_DID_x030_2: 948 case IWN_DID_x030_3: 949 case IWN_DID_x030_4: 950 switch(sc->subdevice_id) { 951 case IWN_SDID_x030_1: 952 case IWN_SDID_x030_3: 953 case IWN_SDID_x030_5: 954 // iwl1030_bgn_cfg 955 case IWN_SDID_x030_2: 956 case IWN_SDID_x030_4: 957 case IWN_SDID_x030_6: 958 //iwl1030_bg_cfg 959 case IWN_SDID_x030_7: 960 case IWN_SDID_x030_10: 961 case IWN_SDID_x030_14: 962 //iwl6030_2agn_cfg 963 case IWN_SDID_x030_8: 964 case IWN_SDID_x030_11: 965 case IWN_SDID_x030_15: 966 // iwl6030_2bgn_cfg 967 case IWN_SDID_x030_9: 968 case IWN_SDID_x030_12: 969 case IWN_SDID_x030_16: 970 // iwl6030_2abg_cfg 971 case IWN_SDID_x030_13: 972 //iwl6030_2bg_cfg 973 sc->fwname = "iwn6000g2bfw"; 974 sc->limits = &iwn6000_sensitivity_limits; 975 sc->base_params = &iwn_6000g2b_base_params; 976 break; 977 default: 978 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 979 "0x%04x rev %d not supported (subdevice)\n", pid, 980 sc->subdevice_id,sc->hw_type); 981 return ENOTSUP; 982 } 983 break; 984 /* 130 Series WiFi */ 985 /* XXX: This series will need adjustment for rate. 986 * see rx_with_siso_diversity in linux kernel 987 */ 988 case IWN_DID_130_1: 989 case IWN_DID_130_2: 990 switch(sc->subdevice_id) { 991 case IWN_SDID_130_1: 992 case IWN_SDID_130_3: 993 case IWN_SDID_130_5: 994 //iwl130_bgn_cfg 995 case IWN_SDID_130_2: 996 case IWN_SDID_130_4: 997 case IWN_SDID_130_6: 998 //iwl130_bg_cfg 999 sc->fwname = "iwn6000g2bfw"; 1000 sc->limits = &iwn6000_sensitivity_limits; 1001 sc->base_params = &iwn_6000g2b_base_params; 1002 break; 1003 default: 1004 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1005 "0x%04x rev %d not supported (subdevice)\n", pid, 1006 sc->subdevice_id,sc->hw_type); 1007 return ENOTSUP; 1008 } 1009 break; 1010 /* 100 Series WiFi */ 1011 case IWN_DID_100_1: 1012 case IWN_DID_100_2: 1013 switch(sc->subdevice_id) { 1014 case IWN_SDID_100_1: 1015 case IWN_SDID_100_2: 1016 case IWN_SDID_100_3: 1017 case IWN_SDID_100_4: 1018 case IWN_SDID_100_5: 1019 case IWN_SDID_100_6: 1020 sc->limits = &iwn1000_sensitivity_limits; 1021 sc->base_params = &iwn1000_base_params; 1022 sc->fwname = "iwn100fw"; 1023 break; 1024 default: 1025 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1026 "0x%04x rev %d not supported (subdevice)\n", pid, 1027 sc->subdevice_id,sc->hw_type); 1028 return ENOTSUP; 1029 } 1030 break; 1031 1032 /* 105 Series */ 1033 /* XXX: This series will need adjustment for rate. 1034 * see rx_with_siso_diversity in linux kernel 1035 */ 1036 case IWN_DID_105_1: 1037 case IWN_DID_105_2: 1038 switch(sc->subdevice_id) { 1039 case IWN_SDID_105_1: 1040 case IWN_SDID_105_2: 1041 case IWN_SDID_105_3: 1042 //iwl105_bgn_cfg 1043 case IWN_SDID_105_4: 1044 //iwl105_bgn_d_cfg 1045 sc->limits = &iwn2030_sensitivity_limits; 1046 sc->base_params = &iwn2000_base_params; 1047 sc->fwname = "iwn105fw"; 1048 break; 1049 default: 1050 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1051 "0x%04x rev %d not supported (subdevice)\n", pid, 1052 sc->subdevice_id,sc->hw_type); 1053 return ENOTSUP; 1054 } 1055 break; 1056 1057 /* 135 Series */ 1058 /* XXX: This series will need adjustment for rate. 1059 * see rx_with_siso_diversity in linux kernel 1060 */ 1061 case IWN_DID_135_1: 1062 case IWN_DID_135_2: 1063 switch(sc->subdevice_id) { 1064 case IWN_SDID_135_1: 1065 case IWN_SDID_135_2: 1066 case IWN_SDID_135_3: 1067 sc->limits = &iwn2030_sensitivity_limits; 1068 sc->base_params = &iwn2030_base_params; 1069 sc->fwname = "iwn135fw"; 1070 break; 1071 default: 1072 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1073 "0x%04x rev %d not supported (subdevice)\n", pid, 1074 sc->subdevice_id,sc->hw_type); 1075 return ENOTSUP; 1076 } 1077 break; 1078 1079 /* 2x00 Series */ 1080 case IWN_DID_2x00_1: 1081 case IWN_DID_2x00_2: 1082 switch(sc->subdevice_id) { 1083 case IWN_SDID_2x00_1: 1084 case IWN_SDID_2x00_2: 1085 case IWN_SDID_2x00_3: 1086 //iwl2000_2bgn_cfg 1087 case IWN_SDID_2x00_4: 1088 //iwl2000_2bgn_d_cfg 1089 sc->limits = &iwn2030_sensitivity_limits; 1090 sc->base_params = &iwn2000_base_params; 1091 sc->fwname = "iwn2000fw"; 1092 break; 1093 default: 1094 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1095 "0x%04x rev %d not supported (subdevice) \n", 1096 pid, sc->subdevice_id, sc->hw_type); 1097 return ENOTSUP; 1098 } 1099 break; 1100 /* 2x30 Series */ 1101 case IWN_DID_2x30_1: 1102 case IWN_DID_2x30_2: 1103 switch(sc->subdevice_id) { 1104 case IWN_SDID_2x30_1: 1105 case IWN_SDID_2x30_3: 1106 case IWN_SDID_2x30_5: 1107 //iwl100_bgn_cfg 1108 case IWN_SDID_2x30_2: 1109 case IWN_SDID_2x30_4: 1110 case IWN_SDID_2x30_6: 1111 //iwl100_bg_cfg 1112 sc->limits = &iwn2030_sensitivity_limits; 1113 sc->base_params = &iwn2030_base_params; 1114 sc->fwname = "iwn2030fw"; 1115 break; 1116 default: 1117 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1118 "0x%04x rev %d not supported (subdevice)\n", pid, 1119 sc->subdevice_id,sc->hw_type); 1120 return ENOTSUP; 1121 } 1122 break; 1123 /* 5x00 Series */ 1124 case IWN_DID_5x00_1: 1125 case IWN_DID_5x00_2: 1126 case IWN_DID_5x00_3: 1127 case IWN_DID_5x00_4: 1128 sc->limits = &iwn5000_sensitivity_limits; 1129 sc->base_params = &iwn5000_base_params; 1130 sc->fwname = "iwn5000fw"; 1131 switch(sc->subdevice_id) { 1132 case IWN_SDID_5x00_1: 1133 case IWN_SDID_5x00_2: 1134 case IWN_SDID_5x00_3: 1135 case IWN_SDID_5x00_4: 1136 case IWN_SDID_5x00_9: 1137 case IWN_SDID_5x00_10: 1138 case IWN_SDID_5x00_11: 1139 case IWN_SDID_5x00_12: 1140 case IWN_SDID_5x00_17: 1141 case IWN_SDID_5x00_18: 1142 case IWN_SDID_5x00_19: 1143 case IWN_SDID_5x00_20: 1144 //iwl5100_agn_cfg 1145 sc->txchainmask = IWN_ANT_B; 1146 sc->rxchainmask = IWN_ANT_AB; 1147 break; 1148 case IWN_SDID_5x00_5: 1149 case IWN_SDID_5x00_6: 1150 case IWN_SDID_5x00_13: 1151 case IWN_SDID_5x00_14: 1152 case IWN_SDID_5x00_21: 1153 case IWN_SDID_5x00_22: 1154 //iwl5100_bgn_cfg 1155 sc->txchainmask = IWN_ANT_B; 1156 sc->rxchainmask = IWN_ANT_AB; 1157 break; 1158 case IWN_SDID_5x00_7: 1159 case IWN_SDID_5x00_8: 1160 case IWN_SDID_5x00_15: 1161 case IWN_SDID_5x00_16: 1162 case IWN_SDID_5x00_23: 1163 case IWN_SDID_5x00_24: 1164 //iwl5100_abg_cfg 1165 sc->txchainmask = IWN_ANT_B; 1166 sc->rxchainmask = IWN_ANT_AB; 1167 break; 1168 case IWN_SDID_5x00_25: 1169 case IWN_SDID_5x00_26: 1170 case IWN_SDID_5x00_27: 1171 case IWN_SDID_5x00_28: 1172 case IWN_SDID_5x00_29: 1173 case IWN_SDID_5x00_30: 1174 case IWN_SDID_5x00_31: 1175 case IWN_SDID_5x00_32: 1176 case IWN_SDID_5x00_33: 1177 case IWN_SDID_5x00_34: 1178 case IWN_SDID_5x00_35: 1179 case IWN_SDID_5x00_36: 1180 //iwl5300_agn_cfg 1181 sc->txchainmask = IWN_ANT_ABC; 1182 sc->rxchainmask = IWN_ANT_ABC; 1183 break; 1184 default: 1185 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1186 "0x%04x rev %d not supported (subdevice)\n", pid, 1187 sc->subdevice_id,sc->hw_type); 1188 return ENOTSUP; 1189 } 1190 break; 1191 /* 5x50 Series */ 1192 case IWN_DID_5x50_1: 1193 case IWN_DID_5x50_2: 1194 case IWN_DID_5x50_3: 1195 case IWN_DID_5x50_4: 1196 sc->limits = &iwn5000_sensitivity_limits; 1197 sc->base_params = &iwn5000_base_params; 1198 sc->fwname = "iwn5000fw"; 1199 switch(sc->subdevice_id) { 1200 case IWN_SDID_5x50_1: 1201 case IWN_SDID_5x50_2: 1202 case IWN_SDID_5x50_3: 1203 //iwl5350_agn_cfg 1204 sc->limits = &iwn5000_sensitivity_limits; 1205 sc->base_params = &iwn5000_base_params; 1206 sc->fwname = "iwn5000fw"; 1207 break; 1208 case IWN_SDID_5x50_4: 1209 case IWN_SDID_5x50_5: 1210 case IWN_SDID_5x50_8: 1211 case IWN_SDID_5x50_9: 1212 case IWN_SDID_5x50_10: 1213 case IWN_SDID_5x50_11: 1214 //iwl5150_agn_cfg 1215 case IWN_SDID_5x50_6: 1216 case IWN_SDID_5x50_7: 1217 case IWN_SDID_5x50_12: 1218 case IWN_SDID_5x50_13: 1219 //iwl5150_abg_cfg 1220 sc->limits = &iwn5000_sensitivity_limits; 1221 sc->fwname = "iwn5150fw"; 1222 sc->base_params = &iwn_5x50_base_params; 1223 break; 1224 default: 1225 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1226 "0x%04x rev %d not supported (subdevice)\n", pid, 1227 sc->subdevice_id,sc->hw_type); 1228 return ENOTSUP; 1229 } 1230 break; 1231 default: 1232 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id : 0x%04x" 1233 "rev 0x%08x not supported (device)\n", pid, sc->subdevice_id, 1234 sc->hw_type); 1235 return ENOTSUP; 1236 } 1237 return 0; 1238 } 1239 1240 static int 1241 iwn4965_attach(struct iwn_softc *sc, uint16_t pid) 1242 { 1243 struct iwn_ops *ops = &sc->ops; 1244 1245 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1246 ops->load_firmware = iwn4965_load_firmware; 1247 ops->read_eeprom = iwn4965_read_eeprom; 1248 ops->post_alive = iwn4965_post_alive; 1249 ops->nic_config = iwn4965_nic_config; 1250 ops->update_sched = iwn4965_update_sched; 1251 ops->get_temperature = iwn4965_get_temperature; 1252 ops->get_rssi = iwn4965_get_rssi; 1253 ops->set_txpower = iwn4965_set_txpower; 1254 ops->init_gains = iwn4965_init_gains; 1255 ops->set_gains = iwn4965_set_gains; 1256 ops->add_node = iwn4965_add_node; 1257 ops->tx_done = iwn4965_tx_done; 1258 ops->ampdu_tx_start = iwn4965_ampdu_tx_start; 1259 ops->ampdu_tx_stop = iwn4965_ampdu_tx_stop; 1260 sc->ntxqs = IWN4965_NTXQUEUES; 1261 sc->firstaggqueue = IWN4965_FIRSTAGGQUEUE; 1262 sc->ndmachnls = IWN4965_NDMACHNLS; 1263 sc->broadcast_id = IWN4965_ID_BROADCAST; 1264 sc->rxonsz = IWN4965_RXONSZ; 1265 sc->schedsz = IWN4965_SCHEDSZ; 1266 sc->fw_text_maxsz = IWN4965_FW_TEXT_MAXSZ; 1267 sc->fw_data_maxsz = IWN4965_FW_DATA_MAXSZ; 1268 sc->fwsz = IWN4965_FWSZ; 1269 sc->sched_txfact_addr = IWN4965_SCHED_TXFACT; 1270 sc->limits = &iwn4965_sensitivity_limits; 1271 sc->fwname = "iwn4965fw"; 1272 /* Override chains masks, ROM is known to be broken. */ 1273 sc->txchainmask = IWN_ANT_AB; 1274 sc->rxchainmask = IWN_ANT_ABC; 1275 /* Enable normal btcoex */ 1276 sc->sc_flags |= IWN_FLAG_BTCOEX; 1277 1278 DPRINTF(sc, IWN_DEBUG_TRACE, "%s: end\n",__func__); 1279 1280 return 0; 1281 } 1282 1283 static int 1284 iwn5000_attach(struct iwn_softc *sc, uint16_t pid) 1285 { 1286 struct iwn_ops *ops = &sc->ops; 1287 1288 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1289 1290 ops->load_firmware = iwn5000_load_firmware; 1291 ops->read_eeprom = iwn5000_read_eeprom; 1292 ops->post_alive = iwn5000_post_alive; 1293 ops->nic_config = iwn5000_nic_config; 1294 ops->update_sched = iwn5000_update_sched; 1295 ops->get_temperature = iwn5000_get_temperature; 1296 ops->get_rssi = iwn5000_get_rssi; 1297 ops->set_txpower = iwn5000_set_txpower; 1298 ops->init_gains = iwn5000_init_gains; 1299 ops->set_gains = iwn5000_set_gains; 1300 ops->add_node = iwn5000_add_node; 1301 ops->tx_done = iwn5000_tx_done; 1302 ops->ampdu_tx_start = iwn5000_ampdu_tx_start; 1303 ops->ampdu_tx_stop = iwn5000_ampdu_tx_stop; 1304 sc->ntxqs = IWN5000_NTXQUEUES; 1305 sc->firstaggqueue = IWN5000_FIRSTAGGQUEUE; 1306 sc->ndmachnls = IWN5000_NDMACHNLS; 1307 sc->broadcast_id = IWN5000_ID_BROADCAST; 1308 sc->rxonsz = IWN5000_RXONSZ; 1309 sc->schedsz = IWN5000_SCHEDSZ; 1310 sc->fw_text_maxsz = IWN5000_FW_TEXT_MAXSZ; 1311 sc->fw_data_maxsz = IWN5000_FW_DATA_MAXSZ; 1312 sc->fwsz = IWN5000_FWSZ; 1313 sc->sched_txfact_addr = IWN5000_SCHED_TXFACT; 1314 sc->reset_noise_gain = IWN5000_PHY_CALIB_RESET_NOISE_GAIN; 1315 sc->noise_gain = IWN5000_PHY_CALIB_NOISE_GAIN; 1316 1317 return 0; 1318 } 1319 1320 /* 1321 * Attach the interface to 802.11 radiotap. 1322 */ 1323 static void 1324 iwn_radiotap_attach(struct iwn_softc *sc) 1325 { 1326 struct ifnet *ifp = sc->sc_ifp; 1327 struct ieee80211com *ic = ifp->if_l2com; 1328 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1329 ieee80211_radiotap_attach(ic, 1330 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 1331 IWN_TX_RADIOTAP_PRESENT, 1332 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 1333 IWN_RX_RADIOTAP_PRESENT); 1334 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1335 } 1336 1337 static void 1338 iwn_sysctlattach(struct iwn_softc *sc) 1339 { 1340 #ifdef IWN_DEBUG 1341 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 1342 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 1343 1344 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1345 "debug", CTLFLAG_RW, &sc->sc_debug, sc->sc_debug, 1346 "control debugging printfs"); 1347 #endif 1348 } 1349 1350 static struct ieee80211vap * 1351 iwn_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 1352 enum ieee80211_opmode opmode, int flags, 1353 const uint8_t bssid[IEEE80211_ADDR_LEN], 1354 const uint8_t mac[IEEE80211_ADDR_LEN]) 1355 { 1356 struct iwn_vap *ivp; 1357 struct ieee80211vap *vap; 1358 uint8_t mac1[IEEE80211_ADDR_LEN]; 1359 struct iwn_softc *sc = ic->ic_ifp->if_softc; 1360 1361 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ 1362 return NULL; 1363 1364 IEEE80211_ADDR_COPY(mac1, mac); 1365 1366 ivp = kmalloc(sizeof(struct iwn_vap), M_80211_VAP, M_INTWAIT | M_ZERO); 1367 if (ivp == NULL) 1368 return NULL; 1369 vap = &ivp->iv_vap; 1370 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac1); 1371 ivp->ctx = IWN_RXON_BSS_CTX; 1372 IEEE80211_ADDR_COPY(ivp->macaddr, mac1); 1373 vap->iv_bmissthreshold = 10; /* override default */ 1374 /* Override with driver methods. */ 1375 ivp->iv_newstate = vap->iv_newstate; 1376 vap->iv_newstate = iwn_newstate; 1377 sc->ivap[IWN_RXON_BSS_CTX] = vap; 1378 1379 ieee80211_ratectl_init(vap); 1380 /* Complete setup. */ 1381 ieee80211_vap_attach(vap, iwn_media_change, ieee80211_media_status); 1382 ic->ic_opmode = opmode; 1383 return vap; 1384 } 1385 1386 static void 1387 iwn_vap_delete(struct ieee80211vap *vap) 1388 { 1389 struct iwn_vap *ivp = IWN_VAP(vap); 1390 1391 ieee80211_ratectl_deinit(vap); 1392 ieee80211_vap_detach(vap); 1393 kfree(ivp, M_80211_VAP); 1394 } 1395 1396 static int 1397 iwn_detach(device_t dev) 1398 { 1399 struct iwn_softc *sc = device_get_softc(dev); 1400 struct ifnet *ifp = sc->sc_ifp; 1401 struct ieee80211com *ic; 1402 int qid; 1403 1404 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1405 1406 if (ifp != NULL) { 1407 ic = ifp->if_l2com; 1408 1409 ieee80211_draintask(ic, &sc->sc_reinit_task); 1410 ieee80211_draintask(ic, &sc->sc_radioon_task); 1411 ieee80211_draintask(ic, &sc->sc_radiooff_task); 1412 1413 iwn_stop(sc); 1414 1415 #if defined(__DragonFly__) 1416 /* doesn't exist for DFly, DFly drains tasks on free */ 1417 #else 1418 taskqueue_drain_all(sc->sc_tq); 1419 #endif 1420 taskqueue_free(sc->sc_tq); 1421 1422 callout_drain(&sc->watchdog_to); 1423 callout_drain(&sc->calib_to); 1424 ieee80211_ifdetach(ic); 1425 } 1426 1427 /* Uninstall interrupt handler. */ 1428 if (sc->irq != NULL) { 1429 bus_teardown_intr(dev, sc->irq, sc->sc_ih); 1430 bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq), 1431 sc->irq); 1432 pci_release_msi(dev); 1433 } 1434 1435 /* Free DMA resources. */ 1436 iwn_free_rx_ring(sc, &sc->rxq); 1437 for (qid = 0; qid < sc->ntxqs; qid++) 1438 iwn_free_tx_ring(sc, &sc->txq[qid]); 1439 iwn_free_sched(sc); 1440 iwn_free_kw(sc); 1441 if (sc->ict != NULL) 1442 iwn_free_ict(sc); 1443 iwn_free_fwmem(sc); 1444 1445 if (sc->mem != NULL) 1446 bus_release_resource(dev, SYS_RES_MEMORY, 1447 rman_get_rid(sc->mem), sc->mem); 1448 1449 if (ifp != NULL) 1450 if_free(ifp); 1451 1452 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n", __func__); 1453 IWN_LOCK_DESTROY(sc); 1454 return 0; 1455 } 1456 1457 static int 1458 iwn_shutdown(device_t dev) 1459 { 1460 struct iwn_softc *sc = device_get_softc(dev); 1461 1462 iwn_stop(sc); 1463 return 0; 1464 } 1465 1466 static int 1467 iwn_suspend(device_t dev) 1468 { 1469 struct iwn_softc *sc = device_get_softc(dev); 1470 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 1471 1472 ieee80211_suspend_all(ic); 1473 return 0; 1474 } 1475 1476 static int 1477 iwn_resume(device_t dev) 1478 { 1479 struct iwn_softc *sc = device_get_softc(dev); 1480 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 1481 1482 /* Clear device-specific "PCI retry timeout" register (41h). */ 1483 pci_write_config(dev, 0x41, 0, 1); 1484 1485 ieee80211_resume_all(ic); 1486 return 0; 1487 } 1488 1489 static int 1490 iwn_nic_lock(struct iwn_softc *sc) 1491 { 1492 int ntries; 1493 1494 /* Request exclusive access to NIC. */ 1495 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 1496 1497 /* Spin until we actually get the lock. */ 1498 for (ntries = 0; ntries < 1000; ntries++) { 1499 if ((IWN_READ(sc, IWN_GP_CNTRL) & 1500 (IWN_GP_CNTRL_MAC_ACCESS_ENA | IWN_GP_CNTRL_SLEEP)) == 1501 IWN_GP_CNTRL_MAC_ACCESS_ENA) 1502 return 0; 1503 DELAY(10); 1504 } 1505 return ETIMEDOUT; 1506 } 1507 1508 static __inline void 1509 iwn_nic_unlock(struct iwn_softc *sc) 1510 { 1511 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 1512 } 1513 1514 static __inline uint32_t 1515 iwn_prph_read(struct iwn_softc *sc, uint32_t addr) 1516 { 1517 IWN_WRITE(sc, IWN_PRPH_RADDR, IWN_PRPH_DWORD | addr); 1518 IWN_BARRIER_READ_WRITE(sc); 1519 return IWN_READ(sc, IWN_PRPH_RDATA); 1520 } 1521 1522 static __inline void 1523 iwn_prph_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 1524 { 1525 IWN_WRITE(sc, IWN_PRPH_WADDR, IWN_PRPH_DWORD | addr); 1526 IWN_BARRIER_WRITE(sc); 1527 IWN_WRITE(sc, IWN_PRPH_WDATA, data); 1528 } 1529 1530 static __inline void 1531 iwn_prph_setbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 1532 { 1533 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) | mask); 1534 } 1535 1536 static __inline void 1537 iwn_prph_clrbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 1538 { 1539 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) & ~mask); 1540 } 1541 1542 static __inline void 1543 iwn_prph_write_region_4(struct iwn_softc *sc, uint32_t addr, 1544 const uint32_t *data, int count) 1545 { 1546 for (; count > 0; count--, data++, addr += 4) 1547 iwn_prph_write(sc, addr, *data); 1548 } 1549 1550 static __inline uint32_t 1551 iwn_mem_read(struct iwn_softc *sc, uint32_t addr) 1552 { 1553 IWN_WRITE(sc, IWN_MEM_RADDR, addr); 1554 IWN_BARRIER_READ_WRITE(sc); 1555 return IWN_READ(sc, IWN_MEM_RDATA); 1556 } 1557 1558 static __inline void 1559 iwn_mem_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 1560 { 1561 IWN_WRITE(sc, IWN_MEM_WADDR, addr); 1562 IWN_BARRIER_WRITE(sc); 1563 IWN_WRITE(sc, IWN_MEM_WDATA, data); 1564 } 1565 1566 static __inline void 1567 iwn_mem_write_2(struct iwn_softc *sc, uint32_t addr, uint16_t data) 1568 { 1569 uint32_t tmp; 1570 1571 tmp = iwn_mem_read(sc, addr & ~3); 1572 if (addr & 3) 1573 tmp = (tmp & 0x0000ffff) | data << 16; 1574 else 1575 tmp = (tmp & 0xffff0000) | data; 1576 iwn_mem_write(sc, addr & ~3, tmp); 1577 } 1578 1579 static __inline void 1580 iwn_mem_read_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t *data, 1581 int count) 1582 { 1583 for (; count > 0; count--, addr += 4) 1584 *data++ = iwn_mem_read(sc, addr); 1585 } 1586 1587 static __inline void 1588 iwn_mem_set_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t val, 1589 int count) 1590 { 1591 for (; count > 0; count--, addr += 4) 1592 iwn_mem_write(sc, addr, val); 1593 } 1594 1595 static int 1596 iwn_eeprom_lock(struct iwn_softc *sc) 1597 { 1598 int i, ntries; 1599 1600 for (i = 0; i < 100; i++) { 1601 /* Request exclusive access to EEPROM. */ 1602 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 1603 IWN_HW_IF_CONFIG_EEPROM_LOCKED); 1604 1605 /* Spin until we actually get the lock. */ 1606 for (ntries = 0; ntries < 100; ntries++) { 1607 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 1608 IWN_HW_IF_CONFIG_EEPROM_LOCKED) 1609 return 0; 1610 DELAY(10); 1611 } 1612 } 1613 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end timeout\n", __func__); 1614 return ETIMEDOUT; 1615 } 1616 1617 static __inline void 1618 iwn_eeprom_unlock(struct iwn_softc *sc) 1619 { 1620 IWN_CLRBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_EEPROM_LOCKED); 1621 } 1622 1623 /* 1624 * Initialize access by host to One Time Programmable ROM. 1625 * NB: This kind of ROM can be found on 1000 or 6000 Series only. 1626 */ 1627 static int 1628 iwn_init_otprom(struct iwn_softc *sc) 1629 { 1630 uint16_t prev, base, next; 1631 int count, error; 1632 1633 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1634 1635 /* Wait for clock stabilization before accessing prph. */ 1636 if ((error = iwn_clock_wait(sc)) != 0) 1637 return error; 1638 1639 if ((error = iwn_nic_lock(sc)) != 0) 1640 return error; 1641 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 1642 DELAY(5); 1643 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 1644 iwn_nic_unlock(sc); 1645 1646 /* Set auto clock gate disable bit for HW with OTP shadow RAM. */ 1647 if (sc->base_params->shadow_ram_support) { 1648 IWN_SETBITS(sc, IWN_DBG_LINK_PWR_MGMT, 1649 IWN_RESET_LINK_PWR_MGMT_DIS); 1650 } 1651 IWN_CLRBITS(sc, IWN_EEPROM_GP, IWN_EEPROM_GP_IF_OWNER); 1652 /* Clear ECC status. */ 1653 IWN_SETBITS(sc, IWN_OTP_GP, 1654 IWN_OTP_GP_ECC_CORR_STTS | IWN_OTP_GP_ECC_UNCORR_STTS); 1655 1656 /* 1657 * Find the block before last block (contains the EEPROM image) 1658 * for HW without OTP shadow RAM. 1659 */ 1660 if (! sc->base_params->shadow_ram_support) { 1661 /* Switch to absolute addressing mode. */ 1662 IWN_CLRBITS(sc, IWN_OTP_GP, IWN_OTP_GP_RELATIVE_ACCESS); 1663 base = prev = 0; 1664 for (count = 0; count < sc->base_params->max_ll_items; 1665 count++) { 1666 error = iwn_read_prom_data(sc, base, &next, 2); 1667 if (error != 0) 1668 return error; 1669 if (next == 0) /* End of linked-list. */ 1670 break; 1671 prev = base; 1672 base = le16toh(next); 1673 } 1674 if (count == 0 || count == sc->base_params->max_ll_items) 1675 return EIO; 1676 /* Skip "next" word. */ 1677 sc->prom_base = prev + 1; 1678 } 1679 1680 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1681 1682 return 0; 1683 } 1684 1685 static int 1686 iwn_read_prom_data(struct iwn_softc *sc, uint32_t addr, void *data, int count) 1687 { 1688 uint8_t *out = data; 1689 uint32_t val, tmp; 1690 int ntries; 1691 1692 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1693 1694 addr += sc->prom_base; 1695 for (; count > 0; count -= 2, addr++) { 1696 IWN_WRITE(sc, IWN_EEPROM, addr << 2); 1697 for (ntries = 0; ntries < 10; ntries++) { 1698 val = IWN_READ(sc, IWN_EEPROM); 1699 if (val & IWN_EEPROM_READ_VALID) 1700 break; 1701 DELAY(5); 1702 } 1703 if (ntries == 10) { 1704 device_printf(sc->sc_dev, 1705 "timeout reading ROM at 0x%x\n", addr); 1706 return ETIMEDOUT; 1707 } 1708 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 1709 /* OTPROM, check for ECC errors. */ 1710 tmp = IWN_READ(sc, IWN_OTP_GP); 1711 if (tmp & IWN_OTP_GP_ECC_UNCORR_STTS) { 1712 device_printf(sc->sc_dev, 1713 "OTPROM ECC error at 0x%x\n", addr); 1714 return EIO; 1715 } 1716 if (tmp & IWN_OTP_GP_ECC_CORR_STTS) { 1717 /* Correctable ECC error, clear bit. */ 1718 IWN_SETBITS(sc, IWN_OTP_GP, 1719 IWN_OTP_GP_ECC_CORR_STTS); 1720 } 1721 } 1722 *out++ = val >> 16; 1723 if (count > 1) 1724 *out++ = val >> 24; 1725 } 1726 1727 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1728 1729 return 0; 1730 } 1731 1732 static void 1733 iwn_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1734 { 1735 if (error != 0) 1736 return; 1737 KASSERT(nsegs == 1, ("too many DMA segments, %d should be 1", nsegs)); 1738 *(bus_addr_t *)arg = segs[0].ds_addr; 1739 } 1740 1741 static int 1742 iwn_dma_contig_alloc(struct iwn_softc *sc, struct iwn_dma_info *dma, 1743 void **kvap, bus_size_t size, bus_size_t alignment) 1744 { 1745 int error; 1746 1747 dma->tag = NULL; 1748 dma->size = size; 1749 1750 #if defined(__DragonFly__) 1751 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment, 1752 0, 1753 BUS_SPACE_MAXADDR_32BIT, 1754 BUS_SPACE_MAXADDR, 1755 NULL, NULL, 1756 size, 1, size, 1757 BUS_DMA_NOWAIT, &dma->tag); 1758 #else 1759 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment, 1760 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size, 1761 1, size, BUS_DMA_NOWAIT, NULL, NULL, &dma->tag); 1762 #endif 1763 if (error != 0) 1764 goto fail; 1765 1766 error = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr, 1767 BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, &dma->map); 1768 if (error != 0) 1769 goto fail; 1770 1771 error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr, size, 1772 iwn_dma_map_addr, &dma->paddr, BUS_DMA_NOWAIT); 1773 if (error != 0) 1774 goto fail; 1775 1776 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 1777 1778 if (kvap != NULL) 1779 *kvap = dma->vaddr; 1780 1781 return 0; 1782 1783 fail: iwn_dma_contig_free(dma); 1784 return error; 1785 } 1786 1787 static void 1788 iwn_dma_contig_free(struct iwn_dma_info *dma) 1789 { 1790 if (dma->vaddr != NULL) { 1791 bus_dmamap_sync(dma->tag, dma->map, 1792 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1793 bus_dmamap_unload(dma->tag, dma->map); 1794 bus_dmamem_free(dma->tag, dma->vaddr, dma->map); 1795 dma->vaddr = NULL; 1796 } 1797 if (dma->tag != NULL) { 1798 bus_dma_tag_destroy(dma->tag); 1799 dma->tag = NULL; 1800 } 1801 } 1802 1803 static int 1804 iwn_alloc_sched(struct iwn_softc *sc) 1805 { 1806 /* TX scheduler rings must be aligned on a 1KB boundary. */ 1807 return iwn_dma_contig_alloc(sc, &sc->sched_dma, (void **)&sc->sched, 1808 sc->schedsz, 1024); 1809 } 1810 1811 static void 1812 iwn_free_sched(struct iwn_softc *sc) 1813 { 1814 iwn_dma_contig_free(&sc->sched_dma); 1815 } 1816 1817 static int 1818 iwn_alloc_kw(struct iwn_softc *sc) 1819 { 1820 /* "Keep Warm" page must be aligned on a 4KB boundary. */ 1821 return iwn_dma_contig_alloc(sc, &sc->kw_dma, NULL, 4096, 4096); 1822 } 1823 1824 static void 1825 iwn_free_kw(struct iwn_softc *sc) 1826 { 1827 iwn_dma_contig_free(&sc->kw_dma); 1828 } 1829 1830 static int 1831 iwn_alloc_ict(struct iwn_softc *sc) 1832 { 1833 /* ICT table must be aligned on a 4KB boundary. */ 1834 return iwn_dma_contig_alloc(sc, &sc->ict_dma, (void **)&sc->ict, 1835 IWN_ICT_SIZE, 4096); 1836 } 1837 1838 static void 1839 iwn_free_ict(struct iwn_softc *sc) 1840 { 1841 iwn_dma_contig_free(&sc->ict_dma); 1842 } 1843 1844 static int 1845 iwn_alloc_fwmem(struct iwn_softc *sc) 1846 { 1847 /* Must be aligned on a 16-byte boundary. */ 1848 return iwn_dma_contig_alloc(sc, &sc->fw_dma, NULL, sc->fwsz, 16); 1849 } 1850 1851 static void 1852 iwn_free_fwmem(struct iwn_softc *sc) 1853 { 1854 iwn_dma_contig_free(&sc->fw_dma); 1855 } 1856 1857 static int 1858 iwn_alloc_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1859 { 1860 bus_size_t size; 1861 int i, error; 1862 1863 ring->cur = 0; 1864 1865 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1866 1867 /* Allocate RX descriptors (256-byte aligned). */ 1868 size = IWN_RX_RING_COUNT * sizeof (uint32_t); 1869 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, 1870 size, 256); 1871 if (error != 0) { 1872 device_printf(sc->sc_dev, 1873 "%s: could not allocate RX ring DMA memory, error %d\n", 1874 __func__, error); 1875 goto fail; 1876 } 1877 1878 /* Allocate RX status area (16-byte aligned). */ 1879 error = iwn_dma_contig_alloc(sc, &ring->stat_dma, (void **)&ring->stat, 1880 sizeof (struct iwn_rx_status), 16); 1881 if (error != 0) { 1882 device_printf(sc->sc_dev, 1883 "%s: could not allocate RX status DMA memory, error %d\n", 1884 __func__, error); 1885 goto fail; 1886 } 1887 1888 /* Create RX buffer DMA tag. */ 1889 #if defined(__DragonFly__) 1890 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 1891 0, 1892 BUS_SPACE_MAXADDR_32BIT, 1893 BUS_SPACE_MAXADDR, 1894 NULL, NULL, 1895 IWN_RBUF_SIZE, 1, IWN_RBUF_SIZE, 1896 BUS_DMA_NOWAIT, &ring->data_dmat); 1897 #else 1898 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 1899 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1900 IWN_RBUF_SIZE, 1, IWN_RBUF_SIZE, BUS_DMA_NOWAIT, NULL, NULL, 1901 &ring->data_dmat); 1902 #endif 1903 if (error != 0) { 1904 device_printf(sc->sc_dev, 1905 "%s: could not create RX buf DMA tag, error %d\n", 1906 __func__, error); 1907 goto fail; 1908 } 1909 1910 /* 1911 * Allocate and map RX buffers. 1912 */ 1913 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1914 struct iwn_rx_data *data = &ring->data[i]; 1915 bus_addr_t paddr; 1916 1917 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 1918 if (error != 0) { 1919 device_printf(sc->sc_dev, 1920 "%s: could not create RX buf DMA map, error %d\n", 1921 __func__, error); 1922 goto fail; 1923 } 1924 1925 data->m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, 1926 IWN_RBUF_SIZE); 1927 if (data->m == NULL) { 1928 device_printf(sc->sc_dev, 1929 "%s: could not allocate RX mbuf\n", __func__); 1930 error = ENOBUFS; 1931 goto fail; 1932 } 1933 1934 error = bus_dmamap_load(ring->data_dmat, data->map, 1935 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr, 1936 &paddr, BUS_DMA_NOWAIT); 1937 if (error != 0 && error != EFBIG) { 1938 device_printf(sc->sc_dev, 1939 "%s: can't not map mbuf, error %d\n", __func__, 1940 error); 1941 goto fail; 1942 } 1943 1944 /* Set physical address of RX buffer (256-byte aligned). */ 1945 ring->desc[i] = htole32(paddr >> 8); 1946 } 1947 1948 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 1949 BUS_DMASYNC_PREWRITE); 1950 1951 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 1952 1953 return 0; 1954 1955 fail: iwn_free_rx_ring(sc, ring); 1956 1957 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 1958 1959 return error; 1960 } 1961 1962 static void 1963 iwn_reset_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1964 { 1965 int ntries; 1966 1967 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 1968 1969 if (iwn_nic_lock(sc) == 0) { 1970 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 1971 for (ntries = 0; ntries < 1000; ntries++) { 1972 if (IWN_READ(sc, IWN_FH_RX_STATUS) & 1973 IWN_FH_RX_STATUS_IDLE) 1974 break; 1975 DELAY(10); 1976 } 1977 iwn_nic_unlock(sc); 1978 } 1979 ring->cur = 0; 1980 sc->last_rx_valid = 0; 1981 } 1982 1983 static void 1984 iwn_free_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1985 { 1986 int i; 1987 1988 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__); 1989 1990 iwn_dma_contig_free(&ring->desc_dma); 1991 iwn_dma_contig_free(&ring->stat_dma); 1992 1993 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1994 struct iwn_rx_data *data = &ring->data[i]; 1995 1996 if (data->m != NULL) { 1997 bus_dmamap_sync(ring->data_dmat, data->map, 1998 BUS_DMASYNC_POSTREAD); 1999 bus_dmamap_unload(ring->data_dmat, data->map); 2000 m_freem(data->m); 2001 data->m = NULL; 2002 } 2003 if (data->map != NULL) 2004 bus_dmamap_destroy(ring->data_dmat, data->map); 2005 } 2006 if (ring->data_dmat != NULL) { 2007 bus_dma_tag_destroy(ring->data_dmat); 2008 ring->data_dmat = NULL; 2009 } 2010 } 2011 2012 static int 2013 iwn_alloc_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring, int qid) 2014 { 2015 bus_addr_t paddr; 2016 bus_size_t size; 2017 int i, error; 2018 2019 ring->qid = qid; 2020 ring->queued = 0; 2021 ring->cur = 0; 2022 2023 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2024 2025 /* Allocate TX descriptors (256-byte aligned). */ 2026 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_desc); 2027 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, 2028 size, 256); 2029 if (error != 0) { 2030 device_printf(sc->sc_dev, 2031 "%s: could not allocate TX ring DMA memory, error %d\n", 2032 __func__, error); 2033 goto fail; 2034 } 2035 2036 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_cmd); 2037 error = iwn_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd, 2038 size, 4); 2039 if (error != 0) { 2040 device_printf(sc->sc_dev, 2041 "%s: could not allocate TX cmd DMA memory, error %d\n", 2042 __func__, error); 2043 goto fail; 2044 } 2045 2046 #if defined(__DragonFly__) 2047 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 2048 0, 2049 BUS_SPACE_MAXADDR_32BIT, 2050 BUS_SPACE_MAXADDR, 2051 NULL, NULL, 2052 MCLBYTES, IWN_MAX_SCATTER - 1, MCLBYTES, 2053 BUS_DMA_NOWAIT, &ring->data_dmat); 2054 #else 2055 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 2056 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 2057 IWN_MAX_SCATTER - 1, MCLBYTES, BUS_DMA_NOWAIT, NULL, NULL, 2058 &ring->data_dmat); 2059 #endif 2060 if (error != 0) { 2061 device_printf(sc->sc_dev, 2062 "%s: could not create TX buf DMA tag, error %d\n", 2063 __func__, error); 2064 goto fail; 2065 } 2066 2067 paddr = ring->cmd_dma.paddr; 2068 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2069 struct iwn_tx_data *data = &ring->data[i]; 2070 2071 data->cmd_paddr = paddr; 2072 data->scratch_paddr = paddr + 12; 2073 paddr += sizeof (struct iwn_tx_cmd); 2074 2075 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 2076 if (error != 0) { 2077 device_printf(sc->sc_dev, 2078 "%s: could not create TX buf DMA map, error %d\n", 2079 __func__, error); 2080 goto fail; 2081 } 2082 } 2083 2084 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2085 2086 return 0; 2087 2088 fail: iwn_free_tx_ring(sc, ring); 2089 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 2090 return error; 2091 } 2092 2093 static void 2094 iwn_reset_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 2095 { 2096 int i; 2097 2098 DPRINTF(sc, IWN_DEBUG_TRACE, "->doing %s \n", __func__); 2099 2100 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2101 struct iwn_tx_data *data = &ring->data[i]; 2102 2103 if (data->m != NULL) { 2104 bus_dmamap_sync(ring->data_dmat, data->map, 2105 BUS_DMASYNC_POSTWRITE); 2106 bus_dmamap_unload(ring->data_dmat, data->map); 2107 m_freem(data->m); 2108 data->m = NULL; 2109 } 2110 } 2111 /* Clear TX descriptors. */ 2112 memset(ring->desc, 0, ring->desc_dma.size); 2113 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 2114 BUS_DMASYNC_PREWRITE); 2115 sc->qfullmsk &= ~(1 << ring->qid); 2116 ring->queued = 0; 2117 ring->cur = 0; 2118 } 2119 2120 static void 2121 iwn_free_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 2122 { 2123 int i; 2124 2125 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__); 2126 2127 iwn_dma_contig_free(&ring->desc_dma); 2128 iwn_dma_contig_free(&ring->cmd_dma); 2129 2130 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2131 struct iwn_tx_data *data = &ring->data[i]; 2132 2133 if (data->m != NULL) { 2134 bus_dmamap_sync(ring->data_dmat, data->map, 2135 BUS_DMASYNC_POSTWRITE); 2136 bus_dmamap_unload(ring->data_dmat, data->map); 2137 m_freem(data->m); 2138 } 2139 if (data->map != NULL) 2140 bus_dmamap_destroy(ring->data_dmat, data->map); 2141 } 2142 if (ring->data_dmat != NULL) { 2143 bus_dma_tag_destroy(ring->data_dmat); 2144 ring->data_dmat = NULL; 2145 } 2146 } 2147 2148 static void 2149 iwn5000_ict_reset(struct iwn_softc *sc) 2150 { 2151 /* Disable interrupts. */ 2152 IWN_WRITE(sc, IWN_INT_MASK, 0); 2153 2154 /* Reset ICT table. */ 2155 memset(sc->ict, 0, IWN_ICT_SIZE); 2156 sc->ict_cur = 0; 2157 2158 /* Set physical address of ICT table (4KB aligned). */ 2159 DPRINTF(sc, IWN_DEBUG_RESET, "%s: enabling ICT\n", __func__); 2160 IWN_WRITE(sc, IWN_DRAM_INT_TBL, IWN_DRAM_INT_TBL_ENABLE | 2161 IWN_DRAM_INT_TBL_WRAP_CHECK | sc->ict_dma.paddr >> 12); 2162 2163 /* Enable periodic RX interrupt. */ 2164 sc->int_mask |= IWN_INT_RX_PERIODIC; 2165 /* Switch to ICT interrupt mode in driver. */ 2166 sc->sc_flags |= IWN_FLAG_USE_ICT; 2167 2168 /* Re-enable interrupts. */ 2169 IWN_WRITE(sc, IWN_INT, 0xffffffff); 2170 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 2171 } 2172 2173 static int 2174 iwn_read_eeprom(struct iwn_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2175 { 2176 struct iwn_ops *ops = &sc->ops; 2177 uint16_t val; 2178 int error; 2179 2180 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2181 2182 /* Check whether adapter has an EEPROM or an OTPROM. */ 2183 if (sc->hw_type >= IWN_HW_REV_TYPE_1000 && 2184 (IWN_READ(sc, IWN_OTP_GP) & IWN_OTP_GP_DEV_SEL_OTP)) 2185 sc->sc_flags |= IWN_FLAG_HAS_OTPROM; 2186 DPRINTF(sc, IWN_DEBUG_RESET, "%s found\n", 2187 (sc->sc_flags & IWN_FLAG_HAS_OTPROM) ? "OTPROM" : "EEPROM"); 2188 2189 /* Adapter has to be powered on for EEPROM access to work. */ 2190 if ((error = iwn_apm_init(sc)) != 0) { 2191 device_printf(sc->sc_dev, 2192 "%s: could not power ON adapter, error %d\n", __func__, 2193 error); 2194 return error; 2195 } 2196 2197 if ((IWN_READ(sc, IWN_EEPROM_GP) & 0x7) == 0) { 2198 device_printf(sc->sc_dev, "%s: bad ROM signature\n", __func__); 2199 return EIO; 2200 } 2201 if ((error = iwn_eeprom_lock(sc)) != 0) { 2202 device_printf(sc->sc_dev, "%s: could not lock ROM, error %d\n", 2203 __func__, error); 2204 return error; 2205 } 2206 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 2207 if ((error = iwn_init_otprom(sc)) != 0) { 2208 device_printf(sc->sc_dev, 2209 "%s: could not initialize OTPROM, error %d\n", 2210 __func__, error); 2211 return error; 2212 } 2213 } 2214 2215 iwn_read_prom_data(sc, IWN_EEPROM_SKU_CAP, &val, 2); 2216 DPRINTF(sc, IWN_DEBUG_RESET, "SKU capabilities=0x%04x\n", le16toh(val)); 2217 /* Check if HT support is bonded out. */ 2218 if (val & htole16(IWN_EEPROM_SKU_CAP_11N)) 2219 sc->sc_flags |= IWN_FLAG_HAS_11N; 2220 2221 iwn_read_prom_data(sc, IWN_EEPROM_RFCFG, &val, 2); 2222 sc->rfcfg = le16toh(val); 2223 DPRINTF(sc, IWN_DEBUG_RESET, "radio config=0x%04x\n", sc->rfcfg); 2224 /* Read Tx/Rx chains from ROM unless it's known to be broken. */ 2225 if (sc->txchainmask == 0) 2226 sc->txchainmask = IWN_RFCFG_TXANTMSK(sc->rfcfg); 2227 if (sc->rxchainmask == 0) 2228 sc->rxchainmask = IWN_RFCFG_RXANTMSK(sc->rfcfg); 2229 2230 /* Read MAC address. */ 2231 iwn_read_prom_data(sc, IWN_EEPROM_MAC, macaddr, 6); 2232 2233 /* Read adapter-specific information from EEPROM. */ 2234 ops->read_eeprom(sc); 2235 2236 iwn_apm_stop(sc); /* Power OFF adapter. */ 2237 2238 iwn_eeprom_unlock(sc); 2239 2240 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2241 2242 return 0; 2243 } 2244 2245 static void 2246 iwn4965_read_eeprom(struct iwn_softc *sc) 2247 { 2248 uint32_t addr; 2249 uint16_t val; 2250 int i; 2251 2252 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2253 2254 /* Read regulatory domain (4 ASCII characters). */ 2255 iwn_read_prom_data(sc, IWN4965_EEPROM_DOMAIN, sc->eeprom_domain, 4); 2256 2257 /* Read the list of authorized channels (20MHz ones only). */ 2258 for (i = 0; i < IWN_NBANDS - 1; i++) { 2259 addr = iwn4965_regulatory_bands[i]; 2260 iwn_read_eeprom_channels(sc, i, addr); 2261 } 2262 2263 /* Read maximum allowed TX power for 2GHz and 5GHz bands. */ 2264 iwn_read_prom_data(sc, IWN4965_EEPROM_MAXPOW, &val, 2); 2265 sc->maxpwr2GHz = val & 0xff; 2266 sc->maxpwr5GHz = val >> 8; 2267 /* Check that EEPROM values are within valid range. */ 2268 if (sc->maxpwr5GHz < 20 || sc->maxpwr5GHz > 50) 2269 sc->maxpwr5GHz = 38; 2270 if (sc->maxpwr2GHz < 20 || sc->maxpwr2GHz > 50) 2271 sc->maxpwr2GHz = 38; 2272 DPRINTF(sc, IWN_DEBUG_RESET, "maxpwr 2GHz=%d 5GHz=%d\n", 2273 sc->maxpwr2GHz, sc->maxpwr5GHz); 2274 2275 /* Read samples for each TX power group. */ 2276 iwn_read_prom_data(sc, IWN4965_EEPROM_BANDS, sc->bands, 2277 sizeof sc->bands); 2278 2279 /* Read voltage at which samples were taken. */ 2280 iwn_read_prom_data(sc, IWN4965_EEPROM_VOLTAGE, &val, 2); 2281 sc->eeprom_voltage = (int16_t)le16toh(val); 2282 DPRINTF(sc, IWN_DEBUG_RESET, "voltage=%d (in 0.3V)\n", 2283 sc->eeprom_voltage); 2284 2285 #ifdef IWN_DEBUG 2286 /* Print samples. */ 2287 if (sc->sc_debug & IWN_DEBUG_ANY) { 2288 for (i = 0; i < IWN_NBANDS - 1; i++) 2289 iwn4965_print_power_group(sc, i); 2290 } 2291 #endif 2292 2293 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2294 } 2295 2296 #ifdef IWN_DEBUG 2297 static void 2298 iwn4965_print_power_group(struct iwn_softc *sc, int i) 2299 { 2300 struct iwn4965_eeprom_band *band = &sc->bands[i]; 2301 struct iwn4965_eeprom_chan_samples *chans = band->chans; 2302 int j, c; 2303 2304 kprintf("===band %d===\n", i); 2305 kprintf("chan lo=%d, chan hi=%d\n", band->lo, band->hi); 2306 kprintf("chan1 num=%d\n", chans[0].num); 2307 for (c = 0; c < 2; c++) { 2308 for (j = 0; j < IWN_NSAMPLES; j++) { 2309 kprintf("chain %d, sample %d: temp=%d gain=%d " 2310 "power=%d pa_det=%d\n", c, j, 2311 chans[0].samples[c][j].temp, 2312 chans[0].samples[c][j].gain, 2313 chans[0].samples[c][j].power, 2314 chans[0].samples[c][j].pa_det); 2315 } 2316 } 2317 kprintf("chan2 num=%d\n", chans[1].num); 2318 for (c = 0; c < 2; c++) { 2319 for (j = 0; j < IWN_NSAMPLES; j++) { 2320 kprintf("chain %d, sample %d: temp=%d gain=%d " 2321 "power=%d pa_det=%d\n", c, j, 2322 chans[1].samples[c][j].temp, 2323 chans[1].samples[c][j].gain, 2324 chans[1].samples[c][j].power, 2325 chans[1].samples[c][j].pa_det); 2326 } 2327 } 2328 } 2329 #endif 2330 2331 static void 2332 iwn5000_read_eeprom(struct iwn_softc *sc) 2333 { 2334 struct iwn5000_eeprom_calib_hdr hdr; 2335 int32_t volt; 2336 uint32_t base, addr; 2337 uint16_t val; 2338 int i; 2339 2340 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2341 2342 /* Read regulatory domain (4 ASCII characters). */ 2343 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 2344 base = le16toh(val); 2345 iwn_read_prom_data(sc, base + IWN5000_EEPROM_DOMAIN, 2346 sc->eeprom_domain, 4); 2347 2348 /* Read the list of authorized channels (20MHz ones only). */ 2349 for (i = 0; i < IWN_NBANDS - 1; i++) { 2350 addr = base + sc->base_params->regulatory_bands[i]; 2351 iwn_read_eeprom_channels(sc, i, addr); 2352 } 2353 2354 /* Read enhanced TX power information for 6000 Series. */ 2355 if (sc->base_params->enhanced_TX_power) 2356 iwn_read_eeprom_enhinfo(sc); 2357 2358 iwn_read_prom_data(sc, IWN5000_EEPROM_CAL, &val, 2); 2359 base = le16toh(val); 2360 iwn_read_prom_data(sc, base, &hdr, sizeof hdr); 2361 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 2362 "%s: calib version=%u pa type=%u voltage=%u\n", __func__, 2363 hdr.version, hdr.pa_type, le16toh(hdr.volt)); 2364 sc->calib_ver = hdr.version; 2365 2366 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) { 2367 sc->eeprom_voltage = le16toh(hdr.volt); 2368 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 2369 sc->eeprom_temp_high=le16toh(val); 2370 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 2371 sc->eeprom_temp = le16toh(val); 2372 } 2373 2374 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 2375 /* Compute temperature offset. */ 2376 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 2377 sc->eeprom_temp = le16toh(val); 2378 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 2379 volt = le16toh(val); 2380 sc->temp_off = sc->eeprom_temp - (volt / -5); 2381 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "temp=%d volt=%d offset=%dK\n", 2382 sc->eeprom_temp, volt, sc->temp_off); 2383 } else { 2384 /* Read crystal calibration. */ 2385 iwn_read_prom_data(sc, base + IWN5000_EEPROM_CRYSTAL, 2386 &sc->eeprom_crystal, sizeof (uint32_t)); 2387 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "crystal calibration 0x%08x\n", 2388 le32toh(sc->eeprom_crystal)); 2389 } 2390 2391 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2392 2393 } 2394 2395 /* 2396 * Translate EEPROM flags to net80211. 2397 */ 2398 static uint32_t 2399 iwn_eeprom_channel_flags(struct iwn_eeprom_chan *channel) 2400 { 2401 uint32_t nflags; 2402 2403 nflags = 0; 2404 if ((channel->flags & IWN_EEPROM_CHAN_ACTIVE) == 0) 2405 nflags |= IEEE80211_CHAN_PASSIVE; 2406 if ((channel->flags & IWN_EEPROM_CHAN_IBSS) == 0) 2407 nflags |= IEEE80211_CHAN_NOADHOC; 2408 if (channel->flags & IWN_EEPROM_CHAN_RADAR) { 2409 nflags |= IEEE80211_CHAN_DFS; 2410 /* XXX apparently IBSS may still be marked */ 2411 nflags |= IEEE80211_CHAN_NOADHOC; 2412 } 2413 2414 return nflags; 2415 } 2416 2417 static void 2418 iwn_read_eeprom_band(struct iwn_softc *sc, int n) 2419 { 2420 struct ifnet *ifp = sc->sc_ifp; 2421 struct ieee80211com *ic = ifp->if_l2com; 2422 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n]; 2423 const struct iwn_chan_band *band = &iwn_bands[n]; 2424 struct ieee80211_channel *c; 2425 uint8_t chan; 2426 int i, nflags; 2427 2428 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2429 2430 for (i = 0; i < band->nchan; i++) { 2431 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) { 2432 DPRINTF(sc, IWN_DEBUG_RESET, 2433 "skip chan %d flags 0x%x maxpwr %d\n", 2434 band->chan[i], channels[i].flags, 2435 channels[i].maxpwr); 2436 continue; 2437 } 2438 chan = band->chan[i]; 2439 nflags = iwn_eeprom_channel_flags(&channels[i]); 2440 2441 c = &ic->ic_channels[ic->ic_nchans++]; 2442 c->ic_ieee = chan; 2443 c->ic_maxregpower = channels[i].maxpwr; 2444 c->ic_maxpower = 2*c->ic_maxregpower; 2445 2446 if (n == 0) { /* 2GHz band */ 2447 c->ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_G); 2448 /* G =>'s B is supported */ 2449 c->ic_flags = IEEE80211_CHAN_B | nflags; 2450 c = &ic->ic_channels[ic->ic_nchans++]; 2451 c[0] = c[-1]; 2452 c->ic_flags = IEEE80211_CHAN_G | nflags; 2453 } else { /* 5GHz band */ 2454 c->ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_A); 2455 c->ic_flags = IEEE80211_CHAN_A | nflags; 2456 } 2457 2458 /* Save maximum allowed TX power for this channel. */ 2459 sc->maxpwr[chan] = channels[i].maxpwr; 2460 2461 DPRINTF(sc, IWN_DEBUG_RESET, 2462 "add chan %d flags 0x%x maxpwr %d\n", chan, 2463 channels[i].flags, channels[i].maxpwr); 2464 2465 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 2466 /* add HT20, HT40 added separately */ 2467 c = &ic->ic_channels[ic->ic_nchans++]; 2468 c[0] = c[-1]; 2469 c->ic_flags |= IEEE80211_CHAN_HT20; 2470 } 2471 } 2472 2473 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2474 2475 } 2476 2477 static void 2478 iwn_read_eeprom_ht40(struct iwn_softc *sc, int n) 2479 { 2480 struct ifnet *ifp = sc->sc_ifp; 2481 struct ieee80211com *ic = ifp->if_l2com; 2482 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n]; 2483 const struct iwn_chan_band *band = &iwn_bands[n]; 2484 struct ieee80211_channel *c, *cent, *extc; 2485 uint8_t chan; 2486 int i, nflags; 2487 2488 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s start\n", __func__); 2489 2490 if (!(sc->sc_flags & IWN_FLAG_HAS_11N)) { 2491 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end no 11n\n", __func__); 2492 return; 2493 } 2494 2495 for (i = 0; i < band->nchan; i++) { 2496 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) { 2497 DPRINTF(sc, IWN_DEBUG_RESET, 2498 "skip chan %d flags 0x%x maxpwr %d\n", 2499 band->chan[i], channels[i].flags, 2500 channels[i].maxpwr); 2501 continue; 2502 } 2503 chan = band->chan[i]; 2504 nflags = iwn_eeprom_channel_flags(&channels[i]); 2505 2506 /* 2507 * Each entry defines an HT40 channel pair; find the 2508 * center channel, then the extension channel above. 2509 */ 2510 cent = ieee80211_find_channel_byieee(ic, chan, 2511 (n == 5 ? IEEE80211_CHAN_G : IEEE80211_CHAN_A)); 2512 if (cent == NULL) { /* XXX shouldn't happen */ 2513 device_printf(sc->sc_dev, 2514 "%s: no entry for channel %d\n", __func__, chan); 2515 continue; 2516 } 2517 extc = ieee80211_find_channel(ic, cent->ic_freq+20, 2518 (n == 5 ? IEEE80211_CHAN_G : IEEE80211_CHAN_A)); 2519 if (extc == NULL) { 2520 DPRINTF(sc, IWN_DEBUG_RESET, 2521 "%s: skip chan %d, extension channel not found\n", 2522 __func__, chan); 2523 continue; 2524 } 2525 2526 DPRINTF(sc, IWN_DEBUG_RESET, 2527 "add ht40 chan %d flags 0x%x maxpwr %d\n", 2528 chan, channels[i].flags, channels[i].maxpwr); 2529 2530 c = &ic->ic_channels[ic->ic_nchans++]; 2531 c[0] = cent[0]; 2532 c->ic_extieee = extc->ic_ieee; 2533 c->ic_flags &= ~IEEE80211_CHAN_HT; 2534 c->ic_flags |= IEEE80211_CHAN_HT40U | nflags; 2535 c = &ic->ic_channels[ic->ic_nchans++]; 2536 c[0] = extc[0]; 2537 c->ic_extieee = cent->ic_ieee; 2538 c->ic_flags &= ~IEEE80211_CHAN_HT; 2539 c->ic_flags |= IEEE80211_CHAN_HT40D | nflags; 2540 } 2541 2542 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2543 2544 } 2545 2546 static void 2547 iwn_read_eeprom_channels(struct iwn_softc *sc, int n, uint32_t addr) 2548 { 2549 struct ifnet *ifp = sc->sc_ifp; 2550 struct ieee80211com *ic = ifp->if_l2com; 2551 2552 iwn_read_prom_data(sc, addr, &sc->eeprom_channels[n], 2553 iwn_bands[n].nchan * sizeof (struct iwn_eeprom_chan)); 2554 2555 if (n < 5) 2556 iwn_read_eeprom_band(sc, n); 2557 else 2558 iwn_read_eeprom_ht40(sc, n); 2559 ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans); 2560 } 2561 2562 static struct iwn_eeprom_chan * 2563 iwn_find_eeprom_channel(struct iwn_softc *sc, struct ieee80211_channel *c) 2564 { 2565 int band, chan, i, j; 2566 2567 if (IEEE80211_IS_CHAN_HT40(c)) { 2568 band = IEEE80211_IS_CHAN_5GHZ(c) ? 6 : 5; 2569 if (IEEE80211_IS_CHAN_HT40D(c)) 2570 chan = c->ic_extieee; 2571 else 2572 chan = c->ic_ieee; 2573 for (i = 0; i < iwn_bands[band].nchan; i++) { 2574 if (iwn_bands[band].chan[i] == chan) 2575 return &sc->eeprom_channels[band][i]; 2576 } 2577 } else { 2578 for (j = 0; j < 5; j++) { 2579 for (i = 0; i < iwn_bands[j].nchan; i++) { 2580 if (iwn_bands[j].chan[i] == c->ic_ieee) 2581 return &sc->eeprom_channels[j][i]; 2582 } 2583 } 2584 } 2585 return NULL; 2586 } 2587 2588 /* 2589 * Enforce flags read from EEPROM. 2590 */ 2591 static int 2592 iwn_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd, 2593 int nchan, struct ieee80211_channel chans[]) 2594 { 2595 struct iwn_softc *sc = ic->ic_ifp->if_softc; 2596 int i; 2597 2598 for (i = 0; i < nchan; i++) { 2599 struct ieee80211_channel *c = &chans[i]; 2600 struct iwn_eeprom_chan *channel; 2601 2602 channel = iwn_find_eeprom_channel(sc, c); 2603 if (channel == NULL) { 2604 if_printf(ic->ic_ifp, 2605 "%s: invalid channel %u freq %u/0x%x\n", 2606 __func__, c->ic_ieee, c->ic_freq, c->ic_flags); 2607 return EINVAL; 2608 } 2609 c->ic_flags |= iwn_eeprom_channel_flags(channel); 2610 } 2611 2612 return 0; 2613 } 2614 2615 static void 2616 iwn_read_eeprom_enhinfo(struct iwn_softc *sc) 2617 { 2618 struct iwn_eeprom_enhinfo enhinfo[35]; 2619 struct ifnet *ifp = sc->sc_ifp; 2620 struct ieee80211com *ic = ifp->if_l2com; 2621 struct ieee80211_channel *c; 2622 uint16_t val, base; 2623 int8_t maxpwr; 2624 uint8_t flags; 2625 int i, j; 2626 2627 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2628 2629 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 2630 base = le16toh(val); 2631 iwn_read_prom_data(sc, base + IWN6000_EEPROM_ENHINFO, 2632 enhinfo, sizeof enhinfo); 2633 2634 for (i = 0; i < nitems(enhinfo); i++) { 2635 flags = enhinfo[i].flags; 2636 if (!(flags & IWN_ENHINFO_VALID)) 2637 continue; /* Skip invalid entries. */ 2638 2639 maxpwr = 0; 2640 if (sc->txchainmask & IWN_ANT_A) 2641 maxpwr = MAX(maxpwr, enhinfo[i].chain[0]); 2642 if (sc->txchainmask & IWN_ANT_B) 2643 maxpwr = MAX(maxpwr, enhinfo[i].chain[1]); 2644 if (sc->txchainmask & IWN_ANT_C) 2645 maxpwr = MAX(maxpwr, enhinfo[i].chain[2]); 2646 if (sc->ntxchains == 2) 2647 maxpwr = MAX(maxpwr, enhinfo[i].mimo2); 2648 else if (sc->ntxchains == 3) 2649 maxpwr = MAX(maxpwr, enhinfo[i].mimo3); 2650 2651 for (j = 0; j < ic->ic_nchans; j++) { 2652 c = &ic->ic_channels[j]; 2653 if ((flags & IWN_ENHINFO_5GHZ)) { 2654 if (!IEEE80211_IS_CHAN_A(c)) 2655 continue; 2656 } else if ((flags & IWN_ENHINFO_OFDM)) { 2657 if (!IEEE80211_IS_CHAN_G(c)) 2658 continue; 2659 } else if (!IEEE80211_IS_CHAN_B(c)) 2660 continue; 2661 if ((flags & IWN_ENHINFO_HT40)) { 2662 if (!IEEE80211_IS_CHAN_HT40(c)) 2663 continue; 2664 } else { 2665 if (IEEE80211_IS_CHAN_HT40(c)) 2666 continue; 2667 } 2668 if (enhinfo[i].chan != 0 && 2669 enhinfo[i].chan != c->ic_ieee) 2670 continue; 2671 2672 DPRINTF(sc, IWN_DEBUG_RESET, 2673 "channel %d(%x), maxpwr %d\n", c->ic_ieee, 2674 c->ic_flags, maxpwr / 2); 2675 c->ic_maxregpower = maxpwr / 2; 2676 c->ic_maxpower = maxpwr; 2677 } 2678 } 2679 2680 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2681 2682 } 2683 2684 static struct ieee80211_node * 2685 iwn_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) 2686 { 2687 return (kmalloc(sizeof (struct iwn_node), 2688 M_80211_NODE, M_INTWAIT | M_ZERO)); 2689 } 2690 2691 static __inline int 2692 rate2plcp(int rate) 2693 { 2694 switch (rate & 0xff) { 2695 case 12: return 0xd; 2696 case 18: return 0xf; 2697 case 24: return 0x5; 2698 case 36: return 0x7; 2699 case 48: return 0x9; 2700 case 72: return 0xb; 2701 case 96: return 0x1; 2702 case 108: return 0x3; 2703 case 2: return 10; 2704 case 4: return 20; 2705 case 11: return 55; 2706 case 22: return 110; 2707 } 2708 return 0; 2709 } 2710 2711 static int 2712 iwn_get_1stream_tx_antmask(struct iwn_softc *sc) 2713 { 2714 2715 return IWN_LSB(sc->txchainmask); 2716 } 2717 2718 static int 2719 iwn_get_2stream_tx_antmask(struct iwn_softc *sc) 2720 { 2721 int tx; 2722 2723 /* 2724 * The '2 stream' setup is a bit .. odd. 2725 * 2726 * For NICs that support only 1 antenna, default to IWN_ANT_AB or 2727 * the firmware panics (eg Intel 5100.) 2728 * 2729 * For NICs that support two antennas, we use ANT_AB. 2730 * 2731 * For NICs that support three antennas, we use the two that 2732 * wasn't the default one. 2733 * 2734 * XXX TODO: if bluetooth (full concurrent) is enabled, restrict 2735 * this to only one antenna. 2736 */ 2737 2738 /* Default - transmit on the other antennas */ 2739 tx = (sc->txchainmask & ~IWN_LSB(sc->txchainmask)); 2740 2741 /* Now, if it's zero, set it to IWN_ANT_AB, so to not panic firmware */ 2742 if (tx == 0) 2743 tx = IWN_ANT_AB; 2744 2745 /* 2746 * If the NIC is a two-stream TX NIC, configure the TX mask to 2747 * the default chainmask 2748 */ 2749 else if (sc->ntxchains == 2) 2750 tx = sc->txchainmask; 2751 2752 return (tx); 2753 } 2754 2755 2756 2757 /* 2758 * Calculate the required PLCP value from the given rate, 2759 * to the given node. 2760 * 2761 * This will take the node configuration (eg 11n, rate table 2762 * setup, etc) into consideration. 2763 */ 2764 static uint32_t 2765 iwn_rate_to_plcp(struct iwn_softc *sc, struct ieee80211_node *ni, 2766 uint8_t rate) 2767 { 2768 #define RV(v) ((v) & IEEE80211_RATE_VAL) 2769 struct ieee80211com *ic = ni->ni_ic; 2770 uint32_t plcp = 0; 2771 int ridx; 2772 2773 /* 2774 * If it's an MCS rate, let's set the plcp correctly 2775 * and set the relevant flags based on the node config. 2776 */ 2777 if (rate & IEEE80211_RATE_MCS) { 2778 /* 2779 * Set the initial PLCP value to be between 0->31 for 2780 * MCS 0 -> MCS 31, then set the "I'm an MCS rate!" 2781 * flag. 2782 */ 2783 plcp = RV(rate) | IWN_RFLAG_MCS; 2784 2785 /* 2786 * XXX the following should only occur if both 2787 * the local configuration _and_ the remote node 2788 * advertise these capabilities. Thus this code 2789 * may need fixing! 2790 */ 2791 2792 /* 2793 * Set the channel width and guard interval. 2794 */ 2795 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { 2796 plcp |= IWN_RFLAG_HT40; 2797 if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) 2798 plcp |= IWN_RFLAG_SGI; 2799 } else if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) { 2800 plcp |= IWN_RFLAG_SGI; 2801 } 2802 2803 /* 2804 * Ensure the selected rate matches the link quality 2805 * table entries being used. 2806 */ 2807 if (rate > 0x8f) 2808 plcp |= IWN_RFLAG_ANT(sc->txchainmask); 2809 else if (rate > 0x87) 2810 plcp |= IWN_RFLAG_ANT(iwn_get_2stream_tx_antmask(sc)); 2811 else 2812 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc)); 2813 } else { 2814 /* 2815 * Set the initial PLCP - fine for both 2816 * OFDM and CCK rates. 2817 */ 2818 plcp = rate2plcp(rate); 2819 2820 /* Set CCK flag if it's CCK */ 2821 2822 /* XXX It would be nice to have a method 2823 * to map the ridx -> phy table entry 2824 * so we could just query that, rather than 2825 * this hack to check against IWN_RIDX_OFDM6. 2826 */ 2827 ridx = ieee80211_legacy_rate_lookup(ic->ic_rt, 2828 rate & IEEE80211_RATE_VAL); 2829 if (ridx < IWN_RIDX_OFDM6 && 2830 IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 2831 plcp |= IWN_RFLAG_CCK; 2832 2833 /* Set antenna configuration */ 2834 /* XXX TODO: is this the right antenna to use for legacy? */ 2835 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc)); 2836 } 2837 2838 DPRINTF(sc, IWN_DEBUG_TXRATE, "%s: rate=0x%02x, plcp=0x%08x\n", 2839 __func__, 2840 rate, 2841 plcp); 2842 2843 return (htole32(plcp)); 2844 #undef RV 2845 } 2846 2847 static void 2848 iwn_newassoc(struct ieee80211_node *ni, int isnew) 2849 { 2850 /* Doesn't do anything at the moment */ 2851 } 2852 2853 static int 2854 iwn_media_change(struct ifnet *ifp) 2855 { 2856 int error; 2857 2858 error = ieee80211_media_change(ifp); 2859 /* NB: only the fixed rate can change and that doesn't need a reset */ 2860 return (error == ENETRESET ? 0 : error); 2861 } 2862 2863 static int 2864 iwn_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 2865 { 2866 struct iwn_vap *ivp = IWN_VAP(vap); 2867 struct ieee80211com *ic = vap->iv_ic; 2868 struct iwn_softc *sc = ic->ic_ifp->if_softc; 2869 int error = 0; 2870 2871 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2872 2873 DPRINTF(sc, IWN_DEBUG_STATE, "%s: %s -> %s\n", __func__, 2874 ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); 2875 2876 IEEE80211_UNLOCK(ic); 2877 IWN_LOCK(sc); 2878 #if defined(__DragonFly__) 2879 callout_stop_sync(&sc->calib_to); 2880 #else 2881 callout_stop(&sc->calib_to); 2882 #endif 2883 2884 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 2885 2886 switch (nstate) { 2887 case IEEE80211_S_ASSOC: 2888 if (vap->iv_state != IEEE80211_S_RUN) 2889 break; 2890 /* FALLTHROUGH */ 2891 case IEEE80211_S_AUTH: 2892 if (vap->iv_state == IEEE80211_S_AUTH) 2893 break; 2894 2895 /* 2896 * !AUTH -> AUTH transition requires state reset to handle 2897 * reassociations correctly. 2898 */ 2899 sc->rxon->associd = 0; 2900 sc->rxon->filter &= ~htole32(IWN_FILTER_BSS); 2901 sc->calib.state = IWN_CALIB_STATE_INIT; 2902 2903 if ((error = iwn_auth(sc, vap)) != 0) { 2904 device_printf(sc->sc_dev, 2905 "%s: could not move to auth state\n", __func__); 2906 } 2907 break; 2908 2909 case IEEE80211_S_RUN: 2910 /* 2911 * RUN -> RUN transition; Just restart the timers. 2912 */ 2913 if (vap->iv_state == IEEE80211_S_RUN) { 2914 sc->calib_cnt = 0; 2915 break; 2916 } 2917 2918 /* 2919 * !RUN -> RUN requires setting the association id 2920 * which is done with a firmware cmd. We also defer 2921 * starting the timers until that work is done. 2922 */ 2923 if ((error = iwn_run(sc, vap)) != 0) { 2924 device_printf(sc->sc_dev, 2925 "%s: could not move to run state\n", __func__); 2926 } 2927 break; 2928 2929 case IEEE80211_S_INIT: 2930 sc->calib.state = IWN_CALIB_STATE_INIT; 2931 break; 2932 2933 default: 2934 break; 2935 } 2936 IWN_UNLOCK(sc); 2937 IEEE80211_LOCK(ic); 2938 if (error != 0){ 2939 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 2940 return error; 2941 } 2942 2943 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 2944 2945 return ivp->iv_newstate(vap, nstate, arg); 2946 } 2947 2948 static void 2949 iwn_calib_timeout(void *arg) 2950 { 2951 struct iwn_softc *sc = arg; 2952 2953 IWN_LOCK_ASSERT(sc); 2954 2955 /* Force automatic TX power calibration every 60 secs. */ 2956 if (++sc->calib_cnt >= 120) { 2957 uint32_t flags = 0; 2958 2959 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s\n", 2960 "sending request for statistics"); 2961 (void)iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, 2962 sizeof flags, 1); 2963 sc->calib_cnt = 0; 2964 } 2965 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout, 2966 sc); 2967 } 2968 2969 /* 2970 * Process an RX_PHY firmware notification. This is usually immediately 2971 * followed by an MPDU_RX_DONE notification. 2972 */ 2973 static void 2974 iwn_rx_phy(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2975 struct iwn_rx_data *data) 2976 { 2977 struct iwn_rx_stat *stat = (struct iwn_rx_stat *)(desc + 1); 2978 2979 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: received PHY stats\n", __func__); 2980 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 2981 2982 /* Save RX statistics, they will be used on MPDU_RX_DONE. */ 2983 memcpy(&sc->last_rx_stat, stat, sizeof (*stat)); 2984 sc->last_rx_valid = 1; 2985 } 2986 2987 /* 2988 * Process an RX_DONE (4965AGN only) or MPDU_RX_DONE firmware notification. 2989 * Each MPDU_RX_DONE notification must be preceded by an RX_PHY one. 2990 */ 2991 static void 2992 iwn_rx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2993 struct iwn_rx_data *data) 2994 { 2995 struct iwn_ops *ops = &sc->ops; 2996 struct ifnet *ifp = sc->sc_ifp; 2997 struct ieee80211com *ic = ifp->if_l2com; 2998 struct iwn_rx_ring *ring = &sc->rxq; 2999 struct ieee80211_frame *wh; 3000 struct ieee80211_node *ni; 3001 struct mbuf *m, *m1; 3002 struct iwn_rx_stat *stat; 3003 caddr_t head; 3004 bus_addr_t paddr; 3005 uint32_t flags; 3006 int error, len, rssi, nf; 3007 3008 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3009 3010 if (desc->type == IWN_MPDU_RX_DONE) { 3011 /* Check for prior RX_PHY notification. */ 3012 if (!sc->last_rx_valid) { 3013 DPRINTF(sc, IWN_DEBUG_ANY, 3014 "%s: missing RX_PHY\n", __func__); 3015 return; 3016 } 3017 stat = &sc->last_rx_stat; 3018 } else 3019 stat = (struct iwn_rx_stat *)(desc + 1); 3020 3021 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3022 3023 if (stat->cfg_phy_len > IWN_STAT_MAXLEN) { 3024 device_printf(sc->sc_dev, 3025 "%s: invalid RX statistic header, len %d\n", __func__, 3026 stat->cfg_phy_len); 3027 return; 3028 } 3029 if (desc->type == IWN_MPDU_RX_DONE) { 3030 struct iwn_rx_mpdu *mpdu = (struct iwn_rx_mpdu *)(desc + 1); 3031 head = (caddr_t)(mpdu + 1); 3032 len = le16toh(mpdu->len); 3033 } else { 3034 head = (caddr_t)(stat + 1) + stat->cfg_phy_len; 3035 len = le16toh(stat->len); 3036 } 3037 3038 flags = le32toh(*(uint32_t *)(head + len)); 3039 3040 /* Discard frames with a bad FCS early. */ 3041 if ((flags & IWN_RX_NOERROR) != IWN_RX_NOERROR) { 3042 DPRINTF(sc, IWN_DEBUG_RECV, "%s: RX flags error %x\n", 3043 __func__, flags); 3044 #if defined(__DragonFly__) 3045 ++ifp->if_ierrors; 3046 #else 3047 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 3048 #endif 3049 return; 3050 } 3051 /* Discard frames that are too short. */ 3052 if (len < sizeof (*wh)) { 3053 DPRINTF(sc, IWN_DEBUG_RECV, "%s: frame too short: %d\n", 3054 __func__, len); 3055 #if defined(__DragonFly__) 3056 ++ifp->if_ierrors; 3057 #else 3058 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 3059 #endif 3060 return; 3061 } 3062 3063 m1 = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, IWN_RBUF_SIZE); 3064 if (m1 == NULL) { 3065 DPRINTF(sc, IWN_DEBUG_ANY, "%s: no mbuf to restock ring\n", 3066 __func__); 3067 #if defined(__DragonFly__) 3068 ++ifp->if_ierrors; 3069 #else 3070 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 3071 #endif 3072 return; 3073 } 3074 bus_dmamap_unload(ring->data_dmat, data->map); 3075 3076 error = bus_dmamap_load(ring->data_dmat, data->map, mtod(m1, void *), 3077 IWN_RBUF_SIZE, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT); 3078 if (error != 0 && error != EFBIG) { 3079 device_printf(sc->sc_dev, 3080 "%s: bus_dmamap_load failed, error %d\n", __func__, error); 3081 m_freem(m1); 3082 3083 /* Try to reload the old mbuf. */ 3084 error = bus_dmamap_load(ring->data_dmat, data->map, 3085 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr, 3086 &paddr, BUS_DMA_NOWAIT); 3087 if (error != 0 && error != EFBIG) { 3088 panic("%s: could not load old RX mbuf", __func__); 3089 } 3090 /* Physical address may have changed. */ 3091 ring->desc[ring->cur] = htole32(paddr >> 8); 3092 bus_dmamap_sync(ring->data_dmat, ring->desc_dma.map, 3093 BUS_DMASYNC_PREWRITE); 3094 #if defined(__DragonFly__) 3095 ++ifp->if_ierrors; 3096 #else 3097 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 3098 #endif 3099 return; 3100 } 3101 3102 m = data->m; 3103 data->m = m1; 3104 /* Update RX descriptor. */ 3105 ring->desc[ring->cur] = htole32(paddr >> 8); 3106 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 3107 BUS_DMASYNC_PREWRITE); 3108 3109 /* Finalize mbuf. */ 3110 m->m_pkthdr.rcvif = ifp; 3111 m->m_data = head; 3112 m->m_pkthdr.len = m->m_len = len; 3113 3114 /* Grab a reference to the source node. */ 3115 wh = mtod(m, struct ieee80211_frame *); 3116 ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh); 3117 nf = (ni != NULL && ni->ni_vap->iv_state == IEEE80211_S_RUN && 3118 (ic->ic_flags & IEEE80211_F_SCAN) == 0) ? sc->noise : -95; 3119 3120 rssi = ops->get_rssi(sc, stat); 3121 3122 if (ieee80211_radiotap_active(ic)) { 3123 struct iwn_rx_radiotap_header *tap = &sc->sc_rxtap; 3124 3125 tap->wr_flags = 0; 3126 if (stat->flags & htole16(IWN_STAT_FLAG_SHPREAMBLE)) 3127 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 3128 tap->wr_dbm_antsignal = (int8_t)rssi; 3129 tap->wr_dbm_antnoise = (int8_t)nf; 3130 tap->wr_tsft = stat->tstamp; 3131 switch (stat->rate) { 3132 /* CCK rates. */ 3133 case 10: tap->wr_rate = 2; break; 3134 case 20: tap->wr_rate = 4; break; 3135 case 55: tap->wr_rate = 11; break; 3136 case 110: tap->wr_rate = 22; break; 3137 /* OFDM rates. */ 3138 case 0xd: tap->wr_rate = 12; break; 3139 case 0xf: tap->wr_rate = 18; break; 3140 case 0x5: tap->wr_rate = 24; break; 3141 case 0x7: tap->wr_rate = 36; break; 3142 case 0x9: tap->wr_rate = 48; break; 3143 case 0xb: tap->wr_rate = 72; break; 3144 case 0x1: tap->wr_rate = 96; break; 3145 case 0x3: tap->wr_rate = 108; break; 3146 /* Unknown rate: should not happen. */ 3147 default: tap->wr_rate = 0; 3148 } 3149 } 3150 3151 IWN_UNLOCK(sc); 3152 3153 /* Send the frame to the 802.11 layer. */ 3154 if (ni != NULL) { 3155 if (ni->ni_flags & IEEE80211_NODE_HT) 3156 m->m_flags |= M_AMPDU; 3157 (void)ieee80211_input(ni, m, rssi - nf, nf); 3158 /* Node is no longer needed. */ 3159 ieee80211_free_node(ni); 3160 } else 3161 (void)ieee80211_input_all(ic, m, rssi - nf, nf); 3162 3163 IWN_LOCK(sc); 3164 3165 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3166 3167 } 3168 3169 /* Process an incoming Compressed BlockAck. */ 3170 static void 3171 iwn_rx_compressed_ba(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3172 struct iwn_rx_data *data) 3173 { 3174 struct iwn_ops *ops = &sc->ops; 3175 struct ifnet *ifp = sc->sc_ifp; 3176 struct iwn_node *wn; 3177 struct ieee80211_node *ni; 3178 struct iwn_compressed_ba *ba = (struct iwn_compressed_ba *)(desc + 1); 3179 struct iwn_tx_ring *txq; 3180 struct iwn_tx_data *txdata; 3181 struct ieee80211_tx_ampdu *tap; 3182 struct mbuf *m; 3183 uint64_t bitmap; 3184 uint16_t ssn; 3185 uint8_t tid; 3186 int ackfailcnt = 0, i, lastidx, qid, *res, shift; 3187 int tx_ok = 0, tx_err = 0; 3188 3189 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s begin\n", __func__); 3190 3191 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3192 3193 qid = le16toh(ba->qid); 3194 txq = &sc->txq[ba->qid]; 3195 tap = sc->qid2tap[ba->qid]; 3196 tid = tap->txa_tid; 3197 wn = (void *)tap->txa_ni; 3198 3199 res = NULL; 3200 ssn = 0; 3201 if (!IEEE80211_AMPDU_RUNNING(tap)) { 3202 res = tap->txa_private; 3203 ssn = tap->txa_start & 0xfff; 3204 } 3205 3206 for (lastidx = le16toh(ba->ssn) & 0xff; txq->read != lastidx;) { 3207 txdata = &txq->data[txq->read]; 3208 3209 /* Unmap and free mbuf. */ 3210 bus_dmamap_sync(txq->data_dmat, txdata->map, 3211 BUS_DMASYNC_POSTWRITE); 3212 bus_dmamap_unload(txq->data_dmat, txdata->map); 3213 m = txdata->m, txdata->m = NULL; 3214 ni = txdata->ni, txdata->ni = NULL; 3215 3216 KASSERT(ni != NULL, ("no node")); 3217 KASSERT(m != NULL, ("no mbuf")); 3218 3219 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: freeing m=%p\n", __func__, m); 3220 ieee80211_tx_complete(ni, m, 1); 3221 3222 txq->queued--; 3223 txq->read = (txq->read + 1) % IWN_TX_RING_COUNT; 3224 } 3225 3226 if (txq->queued == 0 && res != NULL) { 3227 iwn_nic_lock(sc); 3228 ops->ampdu_tx_stop(sc, qid, tid, ssn); 3229 iwn_nic_unlock(sc); 3230 sc->qid2tap[qid] = NULL; 3231 kfree(res, M_DEVBUF); 3232 return; 3233 } 3234 3235 if (wn->agg[tid].bitmap == 0) 3236 return; 3237 3238 shift = wn->agg[tid].startidx - ((le16toh(ba->seq) >> 4) & 0xff); 3239 if (shift < 0) 3240 shift += 0x100; 3241 3242 if (wn->agg[tid].nframes > (64 - shift)) 3243 return; 3244 3245 /* 3246 * Walk the bitmap and calculate how many successful and failed 3247 * attempts are made. 3248 * 3249 * Yes, the rate control code doesn't know these are A-MPDU 3250 * subframes and that it's okay to fail some of these. 3251 */ 3252 ni = tap->txa_ni; 3253 bitmap = (le64toh(ba->bitmap) >> shift) & wn->agg[tid].bitmap; 3254 for (i = 0; bitmap; i++) { 3255 if ((bitmap & 1) == 0) { 3256 #if defined(__DragonFly__) 3257 ++ifp->if_oerrors; 3258 #else 3259 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 3260 #endif 3261 tx_err ++; 3262 ieee80211_ratectl_tx_complete(ni->ni_vap, ni, 3263 IEEE80211_RATECTL_TX_FAILURE, &ackfailcnt, NULL); 3264 } else { 3265 #if defined(__DragonFly__) 3266 ++ifp->if_opackets; 3267 #else 3268 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 3269 #endif 3270 tx_ok ++; 3271 ieee80211_ratectl_tx_complete(ni->ni_vap, ni, 3272 IEEE80211_RATECTL_TX_SUCCESS, &ackfailcnt, NULL); 3273 } 3274 bitmap >>= 1; 3275 } 3276 3277 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, 3278 "->%s: end; %d ok; %d err\n",__func__, tx_ok, tx_err); 3279 3280 } 3281 3282 /* 3283 * Process a CALIBRATION_RESULT notification sent by the initialization 3284 * firmware on response to a CMD_CALIB_CONFIG command (5000 only). 3285 */ 3286 static void 3287 iwn5000_rx_calib_results(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3288 struct iwn_rx_data *data) 3289 { 3290 struct iwn_phy_calib *calib = (struct iwn_phy_calib *)(desc + 1); 3291 int len, idx = -1; 3292 3293 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3294 3295 /* Runtime firmware should not send such a notification. */ 3296 if (sc->sc_flags & IWN_FLAG_CALIB_DONE){ 3297 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received after clib done\n", 3298 __func__); 3299 return; 3300 } 3301 len = (le32toh(desc->len) & 0x3fff) - 4; 3302 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3303 3304 switch (calib->code) { 3305 case IWN5000_PHY_CALIB_DC: 3306 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_DC) 3307 idx = 0; 3308 break; 3309 case IWN5000_PHY_CALIB_LO: 3310 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_LO) 3311 idx = 1; 3312 break; 3313 case IWN5000_PHY_CALIB_TX_IQ: 3314 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ) 3315 idx = 2; 3316 break; 3317 case IWN5000_PHY_CALIB_TX_IQ_PERIODIC: 3318 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC) 3319 idx = 3; 3320 break; 3321 case IWN5000_PHY_CALIB_BASE_BAND: 3322 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_BASE_BAND) 3323 idx = 4; 3324 break; 3325 } 3326 if (idx == -1) /* Ignore other results. */ 3327 return; 3328 3329 /* Save calibration result. */ 3330 if (sc->calibcmd[idx].buf != NULL) 3331 kfree(sc->calibcmd[idx].buf, M_DEVBUF); 3332 sc->calibcmd[idx].buf = kmalloc(len, M_DEVBUF, M_INTWAIT); 3333 if (sc->calibcmd[idx].buf == NULL) { 3334 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 3335 "not enough memory for calibration result %d\n", 3336 calib->code); 3337 return; 3338 } 3339 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 3340 "saving calibration result idx=%d, code=%d len=%d\n", idx, calib->code, len); 3341 sc->calibcmd[idx].len = len; 3342 memcpy(sc->calibcmd[idx].buf, calib, len); 3343 } 3344 3345 static void 3346 iwn_stats_update(struct iwn_softc *sc, struct iwn_calib_state *calib, 3347 struct iwn_stats *stats, int len) 3348 { 3349 struct iwn_stats_bt *stats_bt; 3350 struct iwn_stats *lstats; 3351 3352 /* 3353 * First - check whether the length is the bluetooth or normal. 3354 * 3355 * If it's normal - just copy it and bump out. 3356 * Otherwise we have to convert things. 3357 */ 3358 3359 if (len == sizeof(struct iwn_stats) + 4) { 3360 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats)); 3361 sc->last_stat_valid = 1; 3362 return; 3363 } 3364 3365 /* 3366 * If it's not the bluetooth size - log, then just copy. 3367 */ 3368 if (len != sizeof(struct iwn_stats_bt) + 4) { 3369 DPRINTF(sc, IWN_DEBUG_STATS, 3370 "%s: size of rx statistics (%d) not an expected size!\n", 3371 __func__, 3372 len); 3373 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats)); 3374 sc->last_stat_valid = 1; 3375 return; 3376 } 3377 3378 /* 3379 * Ok. Time to copy. 3380 */ 3381 stats_bt = (struct iwn_stats_bt *) stats; 3382 lstats = &sc->last_stat; 3383 3384 /* flags */ 3385 lstats->flags = stats_bt->flags; 3386 /* rx_bt */ 3387 memcpy(&lstats->rx.ofdm, &stats_bt->rx_bt.ofdm, 3388 sizeof(struct iwn_rx_phy_stats)); 3389 memcpy(&lstats->rx.cck, &stats_bt->rx_bt.cck, 3390 sizeof(struct iwn_rx_phy_stats)); 3391 memcpy(&lstats->rx.general, &stats_bt->rx_bt.general_bt.common, 3392 sizeof(struct iwn_rx_general_stats)); 3393 memcpy(&lstats->rx.ht, &stats_bt->rx_bt.ht, 3394 sizeof(struct iwn_rx_ht_phy_stats)); 3395 /* tx */ 3396 memcpy(&lstats->tx, &stats_bt->tx, 3397 sizeof(struct iwn_tx_stats)); 3398 /* general */ 3399 memcpy(&lstats->general, &stats_bt->general, 3400 sizeof(struct iwn_general_stats)); 3401 3402 /* XXX TODO: Squirrel away the extra bluetooth stats somewhere */ 3403 sc->last_stat_valid = 1; 3404 } 3405 3406 /* 3407 * Process an RX_STATISTICS or BEACON_STATISTICS firmware notification. 3408 * The latter is sent by the firmware after each received beacon. 3409 */ 3410 static void 3411 iwn_rx_statistics(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3412 struct iwn_rx_data *data) 3413 { 3414 struct iwn_ops *ops = &sc->ops; 3415 struct ifnet *ifp = sc->sc_ifp; 3416 struct ieee80211com *ic = ifp->if_l2com; 3417 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3418 struct iwn_calib_state *calib = &sc->calib; 3419 struct iwn_stats *stats = (struct iwn_stats *)(desc + 1); 3420 struct iwn_stats *lstats; 3421 int temp; 3422 3423 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3424 3425 /* Ignore statistics received during a scan. */ 3426 if (vap->iv_state != IEEE80211_S_RUN || 3427 (ic->ic_flags & IEEE80211_F_SCAN)){ 3428 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received during calib\n", 3429 __func__); 3430 return; 3431 } 3432 3433 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3434 3435 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_STATS, 3436 "%s: received statistics, cmd %d, len %d\n", 3437 __func__, desc->type, le16toh(desc->len)); 3438 sc->calib_cnt = 0; /* Reset TX power calibration timeout. */ 3439 3440 /* 3441 * Collect/track general statistics for reporting. 3442 * 3443 * This takes care of ensuring that the bluetooth sized message 3444 * will be correctly converted to the legacy sized message. 3445 */ 3446 iwn_stats_update(sc, calib, stats, le16toh(desc->len)); 3447 3448 /* 3449 * And now, let's take a reference of it to use! 3450 */ 3451 lstats = &sc->last_stat; 3452 3453 /* Test if temperature has changed. */ 3454 if (lstats->general.temp != sc->rawtemp) { 3455 /* Convert "raw" temperature to degC. */ 3456 sc->rawtemp = stats->general.temp; 3457 temp = ops->get_temperature(sc); 3458 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d\n", 3459 __func__, temp); 3460 3461 /* Update TX power if need be (4965AGN only). */ 3462 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 3463 iwn4965_power_calibration(sc, temp); 3464 } 3465 3466 if (desc->type != IWN_BEACON_STATISTICS) 3467 return; /* Reply to a statistics request. */ 3468 3469 sc->noise = iwn_get_noise(&lstats->rx.general); 3470 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: noise %d\n", __func__, sc->noise); 3471 3472 /* Test that RSSI and noise are present in stats report. */ 3473 if (le32toh(lstats->rx.general.flags) != 1) { 3474 DPRINTF(sc, IWN_DEBUG_ANY, "%s\n", 3475 "received statistics without RSSI"); 3476 return; 3477 } 3478 3479 if (calib->state == IWN_CALIB_STATE_ASSOC) 3480 iwn_collect_noise(sc, &lstats->rx.general); 3481 else if (calib->state == IWN_CALIB_STATE_RUN) { 3482 iwn_tune_sensitivity(sc, &lstats->rx); 3483 /* 3484 * XXX TODO: Only run the RX recovery if we're associated! 3485 */ 3486 iwn_check_rx_recovery(sc, lstats); 3487 iwn_save_stats_counters(sc, lstats); 3488 } 3489 3490 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3491 } 3492 3493 /* 3494 * Save the relevant statistic counters for the next calibration 3495 * pass. 3496 */ 3497 static void 3498 iwn_save_stats_counters(struct iwn_softc *sc, const struct iwn_stats *rs) 3499 { 3500 struct iwn_calib_state *calib = &sc->calib; 3501 3502 /* Save counters values for next call. */ 3503 calib->bad_plcp_cck = le32toh(rs->rx.cck.bad_plcp); 3504 calib->fa_cck = le32toh(rs->rx.cck.fa); 3505 calib->bad_plcp_ht = le32toh(rs->rx.ht.bad_plcp); 3506 calib->bad_plcp_ofdm = le32toh(rs->rx.ofdm.bad_plcp); 3507 calib->fa_ofdm = le32toh(rs->rx.ofdm.fa); 3508 3509 /* Last time we received these tick values */ 3510 sc->last_calib_ticks = ticks; 3511 } 3512 3513 /* 3514 * Process a TX_DONE firmware notification. Unfortunately, the 4965AGN 3515 * and 5000 adapters have different incompatible TX status formats. 3516 */ 3517 static void 3518 iwn4965_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3519 struct iwn_rx_data *data) 3520 { 3521 struct iwn4965_tx_stat *stat = (struct iwn4965_tx_stat *)(desc + 1); 3522 struct iwn_tx_ring *ring; 3523 int qid; 3524 3525 qid = desc->qid & 0xf; 3526 ring = &sc->txq[qid]; 3527 3528 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: " 3529 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n", 3530 __func__, desc->qid, desc->idx, 3531 stat->rtsfailcnt, 3532 stat->ackfailcnt, 3533 stat->btkillcnt, 3534 stat->rate, le16toh(stat->duration), 3535 le32toh(stat->status)); 3536 3537 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3538 if (qid >= sc->firstaggqueue) { 3539 iwn_ampdu_tx_done(sc, qid, desc->idx, stat->nframes, 3540 stat->ackfailcnt, &stat->status); 3541 } else { 3542 iwn_tx_done(sc, desc, stat->ackfailcnt, 3543 le32toh(stat->status) & 0xff); 3544 } 3545 } 3546 3547 static void 3548 iwn5000_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3549 struct iwn_rx_data *data) 3550 { 3551 struct iwn5000_tx_stat *stat = (struct iwn5000_tx_stat *)(desc + 1); 3552 struct iwn_tx_ring *ring; 3553 int qid; 3554 3555 qid = desc->qid & 0xf; 3556 ring = &sc->txq[qid]; 3557 3558 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: " 3559 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n", 3560 __func__, desc->qid, desc->idx, 3561 stat->rtsfailcnt, 3562 stat->ackfailcnt, 3563 stat->btkillcnt, 3564 stat->rate, le16toh(stat->duration), 3565 le32toh(stat->status)); 3566 3567 #ifdef notyet 3568 /* Reset TX scheduler slot. */ 3569 iwn5000_reset_sched(sc, desc->qid & 0xf, desc->idx); 3570 #endif 3571 3572 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3573 if (qid >= sc->firstaggqueue) { 3574 iwn_ampdu_tx_done(sc, qid, desc->idx, stat->nframes, 3575 stat->ackfailcnt, &stat->status); 3576 } else { 3577 iwn_tx_done(sc, desc, stat->ackfailcnt, 3578 le16toh(stat->status) & 0xff); 3579 } 3580 } 3581 3582 /* 3583 * Adapter-independent backend for TX_DONE firmware notifications. 3584 */ 3585 static void 3586 iwn_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, int ackfailcnt, 3587 uint8_t status) 3588 { 3589 struct ifnet *ifp = sc->sc_ifp; 3590 struct iwn_tx_ring *ring = &sc->txq[desc->qid & 0xf]; 3591 struct iwn_tx_data *data = &ring->data[desc->idx]; 3592 struct mbuf *m; 3593 struct ieee80211_node *ni; 3594 struct ieee80211vap *vap; 3595 3596 KASSERT(data->ni != NULL, ("no node")); 3597 3598 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3599 3600 /* Unmap and free mbuf. */ 3601 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); 3602 bus_dmamap_unload(ring->data_dmat, data->map); 3603 m = data->m, data->m = NULL; 3604 ni = data->ni, data->ni = NULL; 3605 vap = ni->ni_vap; 3606 3607 /* 3608 * Update rate control statistics for the node. 3609 */ 3610 if (status & IWN_TX_FAIL) { 3611 #if defined(__DragonFly__) 3612 ++ifp->if_oerrors; 3613 #else 3614 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 3615 #endif 3616 ieee80211_ratectl_tx_complete(vap, ni, 3617 IEEE80211_RATECTL_TX_FAILURE, &ackfailcnt, NULL); 3618 } else { 3619 #if defined(__DragonFly__) 3620 ++ifp->if_opackets; 3621 #else 3622 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 3623 #endif 3624 ieee80211_ratectl_tx_complete(vap, ni, 3625 IEEE80211_RATECTL_TX_SUCCESS, &ackfailcnt, NULL); 3626 } 3627 3628 /* 3629 * Channels marked for "radar" require traffic to be received 3630 * to unlock before we can transmit. Until traffic is seen 3631 * any attempt to transmit is returned immediately with status 3632 * set to IWN_TX_FAIL_TX_LOCKED. Unfortunately this can easily 3633 * happen on first authenticate after scanning. To workaround 3634 * this we ignore a failure of this sort in AUTH state so the 3635 * 802.11 layer will fall back to using a timeout to wait for 3636 * the AUTH reply. This allows the firmware time to see 3637 * traffic so a subsequent retry of AUTH succeeds. It's 3638 * unclear why the firmware does not maintain state for 3639 * channels recently visited as this would allow immediate 3640 * use of the channel after a scan (where we see traffic). 3641 */ 3642 if (status == IWN_TX_FAIL_TX_LOCKED && 3643 ni->ni_vap->iv_state == IEEE80211_S_AUTH) 3644 ieee80211_tx_complete(ni, m, 0); 3645 else 3646 ieee80211_tx_complete(ni, m, 3647 (status & IWN_TX_FAIL) != 0); 3648 3649 sc->sc_tx_timer = 0; 3650 if (--ring->queued < IWN_TX_RING_LOMARK) { 3651 sc->qfullmsk &= ~(1 << ring->qid); 3652 #if defined(__DragonFly__) 3653 if (sc->qfullmsk == 0 && ifq_is_oactive(&ifp->if_snd)) { 3654 ifq_clr_oactive(&ifp->if_snd); 3655 iwn_start_locked(ifp); 3656 } 3657 #else 3658 if (sc->qfullmsk == 0 && 3659 (ifp->if_drv_flags & IFF_DRV_OACTIVE)) { 3660 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3661 iwn_start_locked(ifp); 3662 } 3663 #endif 3664 } 3665 3666 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3667 3668 } 3669 3670 /* 3671 * Process a "command done" firmware notification. This is where we wakeup 3672 * processes waiting for a synchronous command completion. 3673 */ 3674 static void 3675 iwn_cmd_done(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3676 { 3677 struct iwn_tx_ring *ring; 3678 struct iwn_tx_data *data; 3679 int cmd_queue_num; 3680 3681 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 3682 cmd_queue_num = IWN_PAN_CMD_QUEUE; 3683 else 3684 cmd_queue_num = IWN_CMD_QUEUE_NUM; 3685 3686 if ((desc->qid & IWN_RX_DESC_QID_MSK) != cmd_queue_num) 3687 return; /* Not a command ack. */ 3688 3689 ring = &sc->txq[cmd_queue_num]; 3690 data = &ring->data[desc->idx]; 3691 3692 /* If the command was mapped in an mbuf, free it. */ 3693 if (data->m != NULL) { 3694 bus_dmamap_sync(ring->data_dmat, data->map, 3695 BUS_DMASYNC_POSTWRITE); 3696 bus_dmamap_unload(ring->data_dmat, data->map); 3697 m_freem(data->m); 3698 data->m = NULL; 3699 } 3700 wakeup(&ring->desc[desc->idx]); 3701 } 3702 3703 static void 3704 iwn_ampdu_tx_done(struct iwn_softc *sc, int qid, int idx, int nframes, 3705 int ackfailcnt, void *stat) 3706 { 3707 struct iwn_ops *ops = &sc->ops; 3708 struct ifnet *ifp = sc->sc_ifp; 3709 struct iwn_tx_ring *ring = &sc->txq[qid]; 3710 struct iwn_tx_data *data; 3711 struct mbuf *m; 3712 struct iwn_node *wn; 3713 struct ieee80211_node *ni; 3714 struct ieee80211_tx_ampdu *tap; 3715 uint64_t bitmap; 3716 uint32_t *status = stat; 3717 uint16_t *aggstatus = stat; 3718 uint16_t ssn; 3719 uint8_t tid; 3720 int bit, i, lastidx, *res, seqno, shift, start; 3721 3722 /* XXX TODO: status is le16 field! Grr */ 3723 3724 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3725 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: nframes=%d, status=0x%08x\n", 3726 __func__, 3727 nframes, 3728 *status); 3729 3730 tap = sc->qid2tap[qid]; 3731 tid = tap->txa_tid; 3732 wn = (void *)tap->txa_ni; 3733 ni = tap->txa_ni; 3734 3735 /* 3736 * XXX TODO: ACK and RTS failures would be nice here! 3737 */ 3738 3739 /* 3740 * A-MPDU single frame status - if we failed to transmit it 3741 * in A-MPDU, then it may be a permanent failure. 3742 * 3743 * XXX TODO: check what the Linux iwlwifi driver does here; 3744 * there's some permanent and temporary failures that may be 3745 * handled differently. 3746 */ 3747 if (nframes == 1) { 3748 if ((*status & 0xff) != 1 && (*status & 0xff) != 2) { 3749 #ifdef NOT_YET 3750 kprintf("ieee80211_send_bar()\n"); 3751 #endif 3752 /* 3753 * If we completely fail a transmit, make sure a 3754 * notification is pushed up to the rate control 3755 * layer. 3756 */ 3757 ieee80211_ratectl_tx_complete(ni->ni_vap, 3758 ni, 3759 IEEE80211_RATECTL_TX_FAILURE, 3760 &ackfailcnt, 3761 NULL); 3762 } else { 3763 /* 3764 * If nframes=1, then we won't be getting a BA for 3765 * this frame. Ensure that we correctly update the 3766 * rate control code with how many retries were 3767 * needed to send it. 3768 */ 3769 ieee80211_ratectl_tx_complete(ni->ni_vap, 3770 ni, 3771 IEEE80211_RATECTL_TX_SUCCESS, 3772 &ackfailcnt, 3773 NULL); 3774 } 3775 } 3776 3777 bitmap = 0; 3778 start = idx; 3779 for (i = 0; i < nframes; i++) { 3780 if (le16toh(aggstatus[i * 2]) & 0xc) 3781 continue; 3782 3783 idx = le16toh(aggstatus[2*i + 1]) & 0xff; 3784 bit = idx - start; 3785 shift = 0; 3786 if (bit >= 64) { 3787 shift = 0x100 - idx + start; 3788 bit = 0; 3789 start = idx; 3790 } else if (bit <= -64) 3791 bit = 0x100 - start + idx; 3792 else if (bit < 0) { 3793 shift = start - idx; 3794 start = idx; 3795 bit = 0; 3796 } 3797 bitmap = bitmap << shift; 3798 bitmap |= 1ULL << bit; 3799 } 3800 tap = sc->qid2tap[qid]; 3801 tid = tap->txa_tid; 3802 wn = (void *)tap->txa_ni; 3803 wn->agg[tid].bitmap = bitmap; 3804 wn->agg[tid].startidx = start; 3805 wn->agg[tid].nframes = nframes; 3806 3807 res = NULL; 3808 ssn = 0; 3809 if (!IEEE80211_AMPDU_RUNNING(tap)) { 3810 res = tap->txa_private; 3811 ssn = tap->txa_start & 0xfff; 3812 } 3813 3814 /* This is going nframes DWORDS into the descriptor? */ 3815 seqno = le32toh(*(status + nframes)) & 0xfff; 3816 for (lastidx = (seqno & 0xff); ring->read != lastidx;) { 3817 data = &ring->data[ring->read]; 3818 3819 /* Unmap and free mbuf. */ 3820 bus_dmamap_sync(ring->data_dmat, data->map, 3821 BUS_DMASYNC_POSTWRITE); 3822 bus_dmamap_unload(ring->data_dmat, data->map); 3823 m = data->m, data->m = NULL; 3824 ni = data->ni, data->ni = NULL; 3825 3826 KASSERT(ni != NULL, ("no node")); 3827 KASSERT(m != NULL, ("no mbuf")); 3828 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: freeing m=%p\n", __func__, m); 3829 ieee80211_tx_complete(ni, m, 1); 3830 3831 ring->queued--; 3832 ring->read = (ring->read + 1) % IWN_TX_RING_COUNT; 3833 } 3834 3835 if (ring->queued == 0 && res != NULL) { 3836 iwn_nic_lock(sc); 3837 ops->ampdu_tx_stop(sc, qid, tid, ssn); 3838 iwn_nic_unlock(sc); 3839 sc->qid2tap[qid] = NULL; 3840 kfree(res, M_DEVBUF); 3841 return; 3842 } 3843 3844 sc->sc_tx_timer = 0; 3845 if (ring->queued < IWN_TX_RING_LOMARK) { 3846 sc->qfullmsk &= ~(1 << ring->qid); 3847 #if defined(__DragonFly__) 3848 if (sc->qfullmsk == 0 && ifq_is_oactive(&ifp->if_snd)) { 3849 ifq_clr_oactive(&ifp->if_snd); 3850 iwn_start_locked(ifp); 3851 } 3852 #else 3853 if (sc->qfullmsk == 0 && 3854 (ifp->if_drv_flags & IFF_DRV_OACTIVE)) { 3855 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3856 iwn_start_locked(ifp); 3857 } 3858 #endif 3859 } 3860 3861 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3862 3863 } 3864 3865 /* 3866 * Process an INT_FH_RX or INT_SW_RX interrupt. 3867 */ 3868 static void 3869 iwn_notif_intr(struct iwn_softc *sc) 3870 { 3871 struct iwn_ops *ops = &sc->ops; 3872 struct ifnet *ifp = sc->sc_ifp; 3873 struct ieee80211com *ic = ifp->if_l2com; 3874 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3875 uint16_t hw; 3876 3877 bus_dmamap_sync(sc->rxq.stat_dma.tag, sc->rxq.stat_dma.map, 3878 BUS_DMASYNC_POSTREAD); 3879 3880 hw = le16toh(sc->rxq.stat->closed_count) & 0xfff; 3881 while (sc->rxq.cur != hw) { 3882 struct iwn_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 3883 struct iwn_rx_desc *desc; 3884 3885 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3886 BUS_DMASYNC_POSTREAD); 3887 desc = mtod(data->m, struct iwn_rx_desc *); 3888 3889 DPRINTF(sc, IWN_DEBUG_RECV, 3890 "%s: cur=%d; qid %x idx %d flags %x type %d(%s) len %d\n", 3891 __func__, sc->rxq.cur, desc->qid & 0xf, desc->idx, desc->flags, 3892 desc->type, iwn_intr_str(desc->type), 3893 le16toh(desc->len)); 3894 3895 if (!(desc->qid & IWN_UNSOLICITED_RX_NOTIF)) /* Reply to a command. */ 3896 iwn_cmd_done(sc, desc); 3897 3898 switch (desc->type) { 3899 case IWN_RX_PHY: 3900 iwn_rx_phy(sc, desc, data); 3901 break; 3902 3903 case IWN_RX_DONE: /* 4965AGN only. */ 3904 case IWN_MPDU_RX_DONE: 3905 /* An 802.11 frame has been received. */ 3906 iwn_rx_done(sc, desc, data); 3907 break; 3908 3909 case IWN_RX_COMPRESSED_BA: 3910 /* A Compressed BlockAck has been received. */ 3911 iwn_rx_compressed_ba(sc, desc, data); 3912 break; 3913 3914 case IWN_TX_DONE: 3915 /* An 802.11 frame has been transmitted. */ 3916 ops->tx_done(sc, desc, data); 3917 break; 3918 3919 case IWN_RX_STATISTICS: 3920 case IWN_BEACON_STATISTICS: 3921 iwn_rx_statistics(sc, desc, data); 3922 break; 3923 3924 case IWN_BEACON_MISSED: 3925 { 3926 struct iwn_beacon_missed *miss = 3927 (struct iwn_beacon_missed *)(desc + 1); 3928 int misses; 3929 3930 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3931 BUS_DMASYNC_POSTREAD); 3932 misses = le32toh(miss->consecutive); 3933 3934 DPRINTF(sc, IWN_DEBUG_STATE, 3935 "%s: beacons missed %d/%d\n", __func__, 3936 misses, le32toh(miss->total)); 3937 /* 3938 * If more than 5 consecutive beacons are missed, 3939 * reinitialize the sensitivity state machine. 3940 */ 3941 if (vap->iv_state == IEEE80211_S_RUN && 3942 (ic->ic_flags & IEEE80211_F_SCAN) == 0) { 3943 if (misses > 5) 3944 (void)iwn_init_sensitivity(sc); 3945 if (misses >= vap->iv_bmissthreshold) { 3946 IWN_UNLOCK(sc); 3947 ieee80211_beacon_miss(ic); 3948 IWN_LOCK(sc); 3949 } 3950 } 3951 break; 3952 } 3953 case IWN_UC_READY: 3954 { 3955 struct iwn_ucode_info *uc = 3956 (struct iwn_ucode_info *)(desc + 1); 3957 3958 /* The microcontroller is ready. */ 3959 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3960 BUS_DMASYNC_POSTREAD); 3961 DPRINTF(sc, IWN_DEBUG_RESET, 3962 "microcode alive notification version=%d.%d " 3963 "subtype=%x alive=%x\n", uc->major, uc->minor, 3964 uc->subtype, le32toh(uc->valid)); 3965 3966 if (le32toh(uc->valid) != 1) { 3967 device_printf(sc->sc_dev, 3968 "microcontroller initialization failed"); 3969 break; 3970 } 3971 if (uc->subtype == IWN_UCODE_INIT) { 3972 /* Save microcontroller report. */ 3973 memcpy(&sc->ucode_info, uc, sizeof (*uc)); 3974 } 3975 /* Save the address of the error log in SRAM. */ 3976 sc->errptr = le32toh(uc->errptr); 3977 break; 3978 } 3979 case IWN_STATE_CHANGED: 3980 { 3981 /* 3982 * State change allows hardware switch change to be 3983 * noted. However, we handle this in iwn_intr as we 3984 * get both the enable/disble intr. 3985 */ 3986 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3987 BUS_DMASYNC_POSTREAD); 3988 #ifdef IWN_DEBUG 3989 uint32_t *status = (uint32_t *)(desc + 1); 3990 DPRINTF(sc, IWN_DEBUG_INTR | IWN_DEBUG_STATE, 3991 "state changed to %x\n", 3992 le32toh(*status)); 3993 #endif 3994 break; 3995 } 3996 case IWN_START_SCAN: 3997 { 3998 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3999 BUS_DMASYNC_POSTREAD); 4000 #ifdef IWN_DEBUG 4001 struct iwn_start_scan *scan = 4002 (struct iwn_start_scan *)(desc + 1); 4003 DPRINTF(sc, IWN_DEBUG_ANY, 4004 "%s: scanning channel %d status %x\n", 4005 __func__, scan->chan, le32toh(scan->status)); 4006 #endif 4007 break; 4008 } 4009 case IWN_STOP_SCAN: 4010 { 4011 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 4012 BUS_DMASYNC_POSTREAD); 4013 #ifdef IWN_DEBUG 4014 struct iwn_stop_scan *scan = 4015 (struct iwn_stop_scan *)(desc + 1); 4016 DPRINTF(sc, IWN_DEBUG_STATE | IWN_DEBUG_SCAN, 4017 "scan finished nchan=%d status=%d chan=%d\n", 4018 scan->nchan, scan->status, scan->chan); 4019 #endif 4020 sc->sc_is_scanning = 0; 4021 IWN_UNLOCK(sc); 4022 ieee80211_scan_next(vap); 4023 IWN_LOCK(sc); 4024 break; 4025 } 4026 case IWN5000_CALIBRATION_RESULT: 4027 iwn5000_rx_calib_results(sc, desc, data); 4028 break; 4029 4030 case IWN5000_CALIBRATION_DONE: 4031 sc->sc_flags |= IWN_FLAG_CALIB_DONE; 4032 wakeup(sc); 4033 break; 4034 } 4035 4036 sc->rxq.cur = (sc->rxq.cur + 1) % IWN_RX_RING_COUNT; 4037 } 4038 4039 /* Tell the firmware what we have processed. */ 4040 hw = (hw == 0) ? IWN_RX_RING_COUNT - 1 : hw - 1; 4041 IWN_WRITE(sc, IWN_FH_RX_WPTR, hw & ~7); 4042 } 4043 4044 /* 4045 * Process an INT_WAKEUP interrupt raised when the microcontroller wakes up 4046 * from power-down sleep mode. 4047 */ 4048 static void 4049 iwn_wakeup_intr(struct iwn_softc *sc) 4050 { 4051 int qid; 4052 4053 DPRINTF(sc, IWN_DEBUG_RESET, "%s: ucode wakeup from power-down sleep\n", 4054 __func__); 4055 4056 /* Wakeup RX and TX rings. */ 4057 IWN_WRITE(sc, IWN_FH_RX_WPTR, sc->rxq.cur & ~7); 4058 for (qid = 0; qid < sc->ntxqs; qid++) { 4059 struct iwn_tx_ring *ring = &sc->txq[qid]; 4060 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | ring->cur); 4061 } 4062 } 4063 4064 static void 4065 iwn_rftoggle_intr(struct iwn_softc *sc) 4066 { 4067 struct ifnet *ifp = sc->sc_ifp; 4068 struct ieee80211com *ic = ifp->if_l2com; 4069 uint32_t tmp = IWN_READ(sc, IWN_GP_CNTRL); 4070 4071 IWN_LOCK_ASSERT(sc); 4072 4073 device_printf(sc->sc_dev, "RF switch: radio %s\n", 4074 (tmp & IWN_GP_CNTRL_RFKILL) ? "enabled" : "disabled"); 4075 if (tmp & IWN_GP_CNTRL_RFKILL) 4076 ieee80211_runtask(ic, &sc->sc_radioon_task); 4077 else 4078 ieee80211_runtask(ic, &sc->sc_radiooff_task); 4079 } 4080 4081 /* 4082 * Dump the error log of the firmware when a firmware panic occurs. Although 4083 * we can't debug the firmware because it is neither open source nor free, it 4084 * can help us to identify certain classes of problems. 4085 */ 4086 static void 4087 iwn_fatal_intr(struct iwn_softc *sc) 4088 { 4089 struct iwn_fw_dump dump; 4090 int i; 4091 4092 IWN_LOCK_ASSERT(sc); 4093 4094 /* Force a complete recalibration on next init. */ 4095 sc->sc_flags &= ~IWN_FLAG_CALIB_DONE; 4096 4097 /* Check that the error log address is valid. */ 4098 if (sc->errptr < IWN_FW_DATA_BASE || 4099 sc->errptr + sizeof (dump) > 4100 IWN_FW_DATA_BASE + sc->fw_data_maxsz) { 4101 kprintf("%s: bad firmware error log address 0x%08x\n", __func__, 4102 sc->errptr); 4103 return; 4104 } 4105 if (iwn_nic_lock(sc) != 0) { 4106 kprintf("%s: could not read firmware error log\n", __func__); 4107 return; 4108 } 4109 /* Read firmware error log from SRAM. */ 4110 iwn_mem_read_region_4(sc, sc->errptr, (uint32_t *)&dump, 4111 sizeof (dump) / sizeof (uint32_t)); 4112 iwn_nic_unlock(sc); 4113 4114 if (dump.valid == 0) { 4115 kprintf("%s: firmware error log is empty\n", __func__); 4116 return; 4117 } 4118 kprintf("firmware error log:\n"); 4119 kprintf(" error type = \"%s\" (0x%08X)\n", 4120 (dump.id < nitems(iwn_fw_errmsg)) ? 4121 iwn_fw_errmsg[dump.id] : "UNKNOWN", 4122 dump.id); 4123 kprintf(" program counter = 0x%08X\n", dump.pc); 4124 kprintf(" source line = 0x%08X\n", dump.src_line); 4125 kprintf(" error data = 0x%08X%08X\n", 4126 dump.error_data[0], dump.error_data[1]); 4127 kprintf(" branch link = 0x%08X%08X\n", 4128 dump.branch_link[0], dump.branch_link[1]); 4129 kprintf(" interrupt link = 0x%08X%08X\n", 4130 dump.interrupt_link[0], dump.interrupt_link[1]); 4131 kprintf(" time = %u\n", dump.time[0]); 4132 4133 /* Dump driver status (TX and RX rings) while we're here. */ 4134 kprintf("driver status:\n"); 4135 for (i = 0; i < sc->ntxqs; i++) { 4136 struct iwn_tx_ring *ring = &sc->txq[i]; 4137 kprintf(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n", 4138 i, ring->qid, ring->cur, ring->queued); 4139 } 4140 kprintf(" rx ring: cur=%d\n", sc->rxq.cur); 4141 } 4142 4143 static void 4144 iwn_intr(void *arg) 4145 { 4146 struct iwn_softc *sc = arg; 4147 struct ifnet *ifp = sc->sc_ifp; 4148 uint32_t r1, r2, tmp; 4149 4150 IWN_LOCK(sc); 4151 4152 /* Disable interrupts. */ 4153 IWN_WRITE(sc, IWN_INT_MASK, 0); 4154 4155 /* Read interrupts from ICT (fast) or from registers (slow). */ 4156 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 4157 tmp = 0; 4158 while (sc->ict[sc->ict_cur] != 0) { 4159 tmp |= sc->ict[sc->ict_cur]; 4160 sc->ict[sc->ict_cur] = 0; /* Acknowledge. */ 4161 sc->ict_cur = (sc->ict_cur + 1) % IWN_ICT_COUNT; 4162 } 4163 tmp = le32toh(tmp); 4164 if (tmp == 0xffffffff) /* Shouldn't happen. */ 4165 tmp = 0; 4166 else if (tmp & 0xc0000) /* Workaround a HW bug. */ 4167 tmp |= 0x8000; 4168 r1 = (tmp & 0xff00) << 16 | (tmp & 0xff); 4169 r2 = 0; /* Unused. */ 4170 } else { 4171 r1 = IWN_READ(sc, IWN_INT); 4172 if (r1 == 0xffffffff || (r1 & 0xfffffff0) == 0xa5a5a5a0) 4173 return; /* Hardware gone! */ 4174 r2 = IWN_READ(sc, IWN_FH_INT); 4175 } 4176 4177 DPRINTF(sc, IWN_DEBUG_INTR, "interrupt reg1=0x%08x reg2=0x%08x\n" 4178 , r1, r2); 4179 4180 if (r1 == 0 && r2 == 0) 4181 goto done; /* Interrupt not for us. */ 4182 4183 /* Acknowledge interrupts. */ 4184 IWN_WRITE(sc, IWN_INT, r1); 4185 if (!(sc->sc_flags & IWN_FLAG_USE_ICT)) 4186 IWN_WRITE(sc, IWN_FH_INT, r2); 4187 4188 if (r1 & IWN_INT_RF_TOGGLED) { 4189 iwn_rftoggle_intr(sc); 4190 goto done; 4191 } 4192 if (r1 & IWN_INT_CT_REACHED) { 4193 device_printf(sc->sc_dev, "%s: critical temperature reached!\n", 4194 __func__); 4195 } 4196 if (r1 & (IWN_INT_SW_ERR | IWN_INT_HW_ERR)) { 4197 device_printf(sc->sc_dev, "%s: fatal firmware error\n", 4198 __func__); 4199 #ifdef IWN_DEBUG 4200 iwn_debug_register(sc); 4201 #endif 4202 /* Dump firmware error log and stop. */ 4203 iwn_fatal_intr(sc); 4204 4205 taskqueue_enqueue(sc->sc_tq, &sc->sc_panic_task); 4206 goto done; 4207 } 4208 if ((r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX | IWN_INT_RX_PERIODIC)) || 4209 (r2 & IWN_FH_INT_RX)) { 4210 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 4211 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) 4212 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_RX); 4213 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 4214 IWN_INT_PERIODIC_DIS); 4215 iwn_notif_intr(sc); 4216 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) { 4217 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 4218 IWN_INT_PERIODIC_ENA); 4219 } 4220 } else 4221 iwn_notif_intr(sc); 4222 } 4223 4224 if ((r1 & IWN_INT_FH_TX) || (r2 & IWN_FH_INT_TX)) { 4225 if (sc->sc_flags & IWN_FLAG_USE_ICT) 4226 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_TX); 4227 wakeup(sc); /* FH DMA transfer completed. */ 4228 } 4229 4230 if (r1 & IWN_INT_ALIVE) 4231 wakeup(sc); /* Firmware is alive. */ 4232 4233 if (r1 & IWN_INT_WAKEUP) 4234 iwn_wakeup_intr(sc); 4235 4236 done: 4237 /* Re-enable interrupts. */ 4238 if (ifp->if_flags & IFF_UP) 4239 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 4240 4241 IWN_UNLOCK(sc); 4242 } 4243 4244 /* 4245 * Update TX scheduler ring when transmitting an 802.11 frame (4965AGN and 4246 * 5000 adapters use a slightly different format). 4247 */ 4248 static void 4249 iwn4965_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 4250 uint16_t len) 4251 { 4252 uint16_t *w = &sc->sched[qid * IWN4965_SCHED_COUNT + idx]; 4253 4254 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4255 4256 *w = htole16(len + 8); 4257 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4258 BUS_DMASYNC_PREWRITE); 4259 if (idx < IWN_SCHED_WINSZ) { 4260 *(w + IWN_TX_RING_COUNT) = *w; 4261 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4262 BUS_DMASYNC_PREWRITE); 4263 } 4264 } 4265 4266 static void 4267 iwn5000_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 4268 uint16_t len) 4269 { 4270 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 4271 4272 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4273 4274 *w = htole16(id << 12 | (len + 8)); 4275 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4276 BUS_DMASYNC_PREWRITE); 4277 if (idx < IWN_SCHED_WINSZ) { 4278 *(w + IWN_TX_RING_COUNT) = *w; 4279 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4280 BUS_DMASYNC_PREWRITE); 4281 } 4282 } 4283 4284 #ifdef notyet 4285 static void 4286 iwn5000_reset_sched(struct iwn_softc *sc, int qid, int idx) 4287 { 4288 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 4289 4290 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4291 4292 *w = (*w & htole16(0xf000)) | htole16(1); 4293 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4294 BUS_DMASYNC_PREWRITE); 4295 if (idx < IWN_SCHED_WINSZ) { 4296 *(w + IWN_TX_RING_COUNT) = *w; 4297 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4298 BUS_DMASYNC_PREWRITE); 4299 } 4300 } 4301 #endif 4302 4303 /* 4304 * Check whether OFDM 11g protection will be enabled for the given rate. 4305 * 4306 * The original driver code only enabled protection for OFDM rates. 4307 * It didn't check to see whether it was operating in 11a or 11bg mode. 4308 */ 4309 static int 4310 iwn_check_rate_needs_protection(struct iwn_softc *sc, 4311 struct ieee80211vap *vap, uint8_t rate) 4312 { 4313 struct ieee80211com *ic = vap->iv_ic; 4314 4315 /* 4316 * Not in 2GHz mode? Then there's no need to enable OFDM 4317 * 11bg protection. 4318 */ 4319 if (! IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) { 4320 return (0); 4321 } 4322 4323 /* 4324 * 11bg protection not enabled? Then don't use it. 4325 */ 4326 if ((ic->ic_flags & IEEE80211_F_USEPROT) == 0) 4327 return (0); 4328 4329 /* 4330 * If it's an 11n rate - no protection. 4331 * We'll do it via a specific 11n check. 4332 */ 4333 if (rate & IEEE80211_RATE_MCS) { 4334 return (0); 4335 } 4336 4337 /* 4338 * Do a rate table lookup. If the PHY is CCK, 4339 * don't do protection. 4340 */ 4341 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_CCK) 4342 return (0); 4343 4344 /* 4345 * Yup, enable protection. 4346 */ 4347 return (1); 4348 } 4349 4350 /* 4351 * return a value between 0 and IWN_MAX_TX_RETRIES-1 as an index into 4352 * the link quality table that reflects this particular entry. 4353 */ 4354 static int 4355 iwn_tx_rate_to_linkq_offset(struct iwn_softc *sc, struct ieee80211_node *ni, 4356 uint8_t rate) 4357 { 4358 struct ieee80211_rateset *rs; 4359 int is_11n; 4360 int nr; 4361 int i; 4362 uint8_t cmp_rate; 4363 4364 /* 4365 * Figure out if we're using 11n or not here. 4366 */ 4367 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) 4368 is_11n = 1; 4369 else 4370 is_11n = 0; 4371 4372 /* 4373 * Use the correct rate table. 4374 */ 4375 if (is_11n) { 4376 rs = (struct ieee80211_rateset *) &ni->ni_htrates; 4377 nr = ni->ni_htrates.rs_nrates; 4378 } else { 4379 rs = &ni->ni_rates; 4380 nr = rs->rs_nrates; 4381 } 4382 4383 /* 4384 * Find the relevant link quality entry in the table. 4385 */ 4386 for (i = 0; i < nr && i < IWN_MAX_TX_RETRIES - 1 ; i++) { 4387 /* 4388 * The link quality table index starts at 0 == highest 4389 * rate, so we walk the rate table backwards. 4390 */ 4391 cmp_rate = rs->rs_rates[(nr - 1) - i]; 4392 if (rate & IEEE80211_RATE_MCS) 4393 cmp_rate |= IEEE80211_RATE_MCS; 4394 4395 #if 0 4396 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: idx %d: nr=%d, rate=0x%02x, rateentry=0x%02x\n", 4397 __func__, 4398 i, 4399 nr, 4400 rate, 4401 cmp_rate); 4402 #endif 4403 4404 if (cmp_rate == rate) 4405 return (i); 4406 } 4407 4408 /* Failed? Start at the end */ 4409 return (IWN_MAX_TX_RETRIES - 1); 4410 } 4411 4412 static int 4413 iwn_tx_data(struct iwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 4414 { 4415 struct iwn_ops *ops = &sc->ops; 4416 const struct ieee80211_txparam *tp; 4417 struct ieee80211vap *vap = ni->ni_vap; 4418 struct ieee80211com *ic = ni->ni_ic; 4419 struct iwn_node *wn = (void *)ni; 4420 struct iwn_tx_ring *ring; 4421 struct iwn_tx_desc *desc; 4422 struct iwn_tx_data *data; 4423 struct iwn_tx_cmd *cmd; 4424 struct iwn_cmd_data *tx; 4425 struct ieee80211_frame *wh; 4426 struct ieee80211_key *k = NULL; 4427 struct mbuf *m1; 4428 uint32_t flags; 4429 uint16_t qos; 4430 u_int hdrlen; 4431 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER]; 4432 uint8_t tid, type; 4433 int ac, i, totlen, error, pad, nsegs = 0, rate; 4434 4435 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4436 4437 IWN_LOCK_ASSERT(sc); 4438 4439 wh = mtod(m, struct ieee80211_frame *); 4440 hdrlen = ieee80211_anyhdrsize(wh); 4441 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 4442 4443 /* Select EDCA Access Category and TX ring for this frame. */ 4444 if (IEEE80211_QOS_HAS_SEQ(wh)) { 4445 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0]; 4446 tid = qos & IEEE80211_QOS_TID; 4447 } else { 4448 qos = 0; 4449 tid = 0; 4450 } 4451 ac = M_WME_GETAC(m); 4452 if (m->m_flags & M_AMPDU_MPDU) { 4453 uint16_t seqno; 4454 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[ac]; 4455 4456 if (!IEEE80211_AMPDU_RUNNING(tap)) { 4457 m_freem(m); 4458 return EINVAL; 4459 } 4460 4461 /* 4462 * Queue this frame to the hardware ring that we've 4463 * negotiated AMPDU TX on. 4464 * 4465 * Note that the sequence number must match the TX slot 4466 * being used! 4467 */ 4468 ac = *(int *)tap->txa_private; 4469 seqno = ni->ni_txseqs[tid]; 4470 *(uint16_t *)wh->i_seq = 4471 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 4472 ring = &sc->txq[ac]; 4473 if ((seqno % 256) != ring->cur) { 4474 device_printf(sc->sc_dev, 4475 "%s: m=%p: seqno (%d) (%d) != ring index (%d) !\n", 4476 __func__, 4477 m, 4478 seqno, 4479 seqno % 256, 4480 ring->cur); 4481 } 4482 ni->ni_txseqs[tid]++; 4483 } 4484 ring = &sc->txq[ac]; 4485 desc = &ring->desc[ring->cur]; 4486 data = &ring->data[ring->cur]; 4487 4488 /* Choose a TX rate index. */ 4489 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 4490 if (type == IEEE80211_FC0_TYPE_MGT) 4491 rate = tp->mgmtrate; 4492 else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 4493 rate = tp->mcastrate; 4494 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 4495 rate = tp->ucastrate; 4496 else if (m->m_flags & M_EAPOL) 4497 rate = tp->mgmtrate; 4498 else { 4499 /* XXX pass pktlen */ 4500 (void) ieee80211_ratectl_rate(ni, NULL, 0); 4501 rate = ni->ni_txrate; 4502 } 4503 4504 /* Encrypt the frame if need be. */ 4505 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 4506 /* Retrieve key for TX. */ 4507 k = ieee80211_crypto_encap(ni, m); 4508 if (k == NULL) { 4509 m_freem(m); 4510 return ENOBUFS; 4511 } 4512 /* 802.11 header may have moved. */ 4513 wh = mtod(m, struct ieee80211_frame *); 4514 } 4515 totlen = m->m_pkthdr.len; 4516 4517 if (ieee80211_radiotap_active_vap(vap)) { 4518 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 4519 4520 tap->wt_flags = 0; 4521 tap->wt_rate = rate; 4522 if (k != NULL) 4523 tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; 4524 4525 ieee80211_radiotap_tx(vap, m); 4526 } 4527 4528 /* Prepare TX firmware command. */ 4529 cmd = &ring->cmd[ring->cur]; 4530 cmd->code = IWN_CMD_TX_DATA; 4531 cmd->flags = 0; 4532 cmd->qid = ring->qid; 4533 cmd->idx = ring->cur; 4534 4535 tx = (struct iwn_cmd_data *)cmd->data; 4536 /* NB: No need to clear tx, all fields are reinitialized here. */ 4537 tx->scratch = 0; /* clear "scratch" area */ 4538 4539 flags = 0; 4540 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 4541 /* Unicast frame, check if an ACK is expected. */ 4542 if (!qos || (qos & IEEE80211_QOS_ACKPOLICY) != 4543 IEEE80211_QOS_ACKPOLICY_NOACK) 4544 flags |= IWN_TX_NEED_ACK; 4545 } 4546 if ((wh->i_fc[0] & 4547 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 4548 (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR)) 4549 flags |= IWN_TX_IMM_BA; /* Cannot happen yet. */ 4550 4551 if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG) 4552 flags |= IWN_TX_MORE_FRAG; /* Cannot happen yet. */ 4553 4554 /* Check if frame must be protected using RTS/CTS or CTS-to-self. */ 4555 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 4556 /* NB: Group frames are sent using CCK in 802.11b/g. */ 4557 if (totlen + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) { 4558 flags |= IWN_TX_NEED_RTS; 4559 } else if (iwn_check_rate_needs_protection(sc, vap, rate)) { 4560 if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 4561 flags |= IWN_TX_NEED_CTS; 4562 else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 4563 flags |= IWN_TX_NEED_RTS; 4564 } else if ((rate & IEEE80211_RATE_MCS) && 4565 (ic->ic_htprotmode == IEEE80211_PROT_RTSCTS)) { 4566 flags |= IWN_TX_NEED_RTS; 4567 } 4568 4569 /* XXX HT protection? */ 4570 4571 if (flags & (IWN_TX_NEED_RTS | IWN_TX_NEED_CTS)) { 4572 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4573 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4574 flags &= ~(IWN_TX_NEED_RTS | IWN_TX_NEED_CTS); 4575 flags |= IWN_TX_NEED_PROTECTION; 4576 } else 4577 flags |= IWN_TX_FULL_TXOP; 4578 } 4579 } 4580 4581 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 4582 type != IEEE80211_FC0_TYPE_DATA) 4583 tx->id = sc->broadcast_id; 4584 else 4585 tx->id = wn->id; 4586 4587 if (type == IEEE80211_FC0_TYPE_MGT) { 4588 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 4589 4590 /* Tell HW to set timestamp in probe responses. */ 4591 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 4592 flags |= IWN_TX_INSERT_TSTAMP; 4593 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 4594 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 4595 tx->timeout = htole16(3); 4596 else 4597 tx->timeout = htole16(2); 4598 } else 4599 tx->timeout = htole16(0); 4600 4601 if (hdrlen & 3) { 4602 /* First segment length must be a multiple of 4. */ 4603 flags |= IWN_TX_NEED_PADDING; 4604 pad = 4 - (hdrlen & 3); 4605 } else 4606 pad = 0; 4607 4608 tx->len = htole16(totlen); 4609 tx->tid = tid; 4610 tx->rts_ntries = 60; 4611 tx->data_ntries = 15; 4612 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4613 tx->rate = iwn_rate_to_plcp(sc, ni, rate); 4614 if (tx->id == sc->broadcast_id) { 4615 /* Group or management frame. */ 4616 tx->linkq = 0; 4617 } else { 4618 tx->linkq = iwn_tx_rate_to_linkq_offset(sc, ni, rate); 4619 flags |= IWN_TX_LINKQ; /* enable MRR */ 4620 } 4621 4622 /* Set physical address of "scratch area". */ 4623 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr)); 4624 tx->hiaddr = IWN_HIADDR(data->scratch_paddr); 4625 4626 /* Copy 802.11 header in TX command. */ 4627 memcpy((uint8_t *)(tx + 1), wh, hdrlen); 4628 4629 /* Trim 802.11 header. */ 4630 m_adj(m, hdrlen); 4631 tx->security = 0; 4632 tx->flags = htole32(flags); 4633 4634 #if defined(__DragonFly__) 4635 error = bus_dmamap_load_mbuf_segment(ring->data_dmat, 4636 data->map, m, 4637 segs, IWN_MAX_SCATTER - 1, 4638 &nsegs, BUS_DMA_NOWAIT); 4639 #else 4640 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs, 4641 &nsegs, BUS_DMA_NOWAIT); 4642 #endif 4643 if (error != 0) { 4644 if (error != EFBIG) { 4645 device_printf(sc->sc_dev, 4646 "%s: can't map mbuf (error %d)\n", __func__, error); 4647 m_freem(m); 4648 return error; 4649 } 4650 /* Too many DMA segments, linearize mbuf. */ 4651 #if defined(__DragonFly__) 4652 m1 = m_defrag(m, M_NOWAIT); 4653 #else 4654 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER); 4655 #endif 4656 if (m1 == NULL) { 4657 device_printf(sc->sc_dev, 4658 "%s: could not defrag mbuf\n", __func__); 4659 m_freem(m); 4660 return ENOBUFS; 4661 } 4662 m = m1; 4663 4664 #if defined(__DragonFly__) 4665 error = bus_dmamap_load_mbuf_segment(ring->data_dmat, 4666 data->map, m, 4667 segs, IWN_MAX_SCATTER - 1, 4668 &nsegs, BUS_DMA_NOWAIT); 4669 #else 4670 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, 4671 segs, &nsegs, BUS_DMA_NOWAIT); 4672 #endif 4673 if (error != 0) { 4674 device_printf(sc->sc_dev, 4675 "%s: can't map mbuf (error %d)\n", __func__, error); 4676 m_freem(m); 4677 return error; 4678 } 4679 } 4680 4681 data->m = m; 4682 data->ni = ni; 4683 4684 DPRINTF(sc, IWN_DEBUG_XMIT, 4685 "%s: qid %d idx %d len %d nsegs %d flags 0x%08x rate 0x%04x plcp 0x%08x\n", 4686 __func__, 4687 ring->qid, 4688 ring->cur, 4689 m->m_pkthdr.len, 4690 nsegs, 4691 flags, 4692 rate, 4693 tx->rate); 4694 4695 /* Fill TX descriptor. */ 4696 desc->nsegs = 1; 4697 if (m->m_len != 0) 4698 desc->nsegs += nsegs; 4699 /* First DMA segment is used by the TX command. */ 4700 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr)); 4701 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) | 4702 (4 + sizeof (*tx) + hdrlen + pad) << 4); 4703 /* Other DMA segments are for data payload. */ 4704 seg = &segs[0]; 4705 for (i = 1; i <= nsegs; i++) { 4706 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr)); 4707 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) | 4708 seg->ds_len << 4); 4709 seg++; 4710 } 4711 4712 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 4713 bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, 4714 BUS_DMASYNC_PREWRITE); 4715 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 4716 BUS_DMASYNC_PREWRITE); 4717 4718 /* Update TX scheduler. */ 4719 if (ring->qid >= sc->firstaggqueue) 4720 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen); 4721 4722 /* Kick TX ring. */ 4723 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 4724 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 4725 4726 /* Mark TX ring as full if we reach a certain threshold. */ 4727 if (++ring->queued > IWN_TX_RING_HIMARK) 4728 sc->qfullmsk |= 1 << ring->qid; 4729 4730 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 4731 4732 return 0; 4733 } 4734 4735 static int 4736 iwn_tx_data_raw(struct iwn_softc *sc, struct mbuf *m, 4737 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) 4738 { 4739 struct iwn_ops *ops = &sc->ops; 4740 // struct ifnet *ifp = sc->sc_ifp; 4741 struct ieee80211vap *vap = ni->ni_vap; 4742 // struct ieee80211com *ic = ifp->if_l2com; 4743 struct iwn_tx_cmd *cmd; 4744 struct iwn_cmd_data *tx; 4745 struct ieee80211_frame *wh; 4746 struct iwn_tx_ring *ring; 4747 struct iwn_tx_desc *desc; 4748 struct iwn_tx_data *data; 4749 struct mbuf *m1; 4750 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER]; 4751 uint32_t flags; 4752 u_int hdrlen; 4753 int ac, totlen, error, pad, nsegs = 0, i, rate; 4754 uint8_t type; 4755 4756 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4757 4758 IWN_LOCK_ASSERT(sc); 4759 4760 wh = mtod(m, struct ieee80211_frame *); 4761 hdrlen = ieee80211_anyhdrsize(wh); 4762 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 4763 4764 ac = params->ibp_pri & 3; 4765 4766 ring = &sc->txq[ac]; 4767 desc = &ring->desc[ring->cur]; 4768 data = &ring->data[ring->cur]; 4769 4770 /* Choose a TX rate. */ 4771 rate = params->ibp_rate0; 4772 totlen = m->m_pkthdr.len; 4773 4774 /* Prepare TX firmware command. */ 4775 cmd = &ring->cmd[ring->cur]; 4776 cmd->code = IWN_CMD_TX_DATA; 4777 cmd->flags = 0; 4778 cmd->qid = ring->qid; 4779 cmd->idx = ring->cur; 4780 4781 tx = (struct iwn_cmd_data *)cmd->data; 4782 /* NB: No need to clear tx, all fields are reinitialized here. */ 4783 tx->scratch = 0; /* clear "scratch" area */ 4784 4785 flags = 0; 4786 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 4787 flags |= IWN_TX_NEED_ACK; 4788 if (params->ibp_flags & IEEE80211_BPF_RTS) { 4789 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4790 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4791 flags &= ~IWN_TX_NEED_RTS; 4792 flags |= IWN_TX_NEED_PROTECTION; 4793 } else 4794 flags |= IWN_TX_NEED_RTS | IWN_TX_FULL_TXOP; 4795 } 4796 if (params->ibp_flags & IEEE80211_BPF_CTS) { 4797 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4798 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4799 flags &= ~IWN_TX_NEED_CTS; 4800 flags |= IWN_TX_NEED_PROTECTION; 4801 } else 4802 flags |= IWN_TX_NEED_CTS | IWN_TX_FULL_TXOP; 4803 } 4804 if (type == IEEE80211_FC0_TYPE_MGT) { 4805 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 4806 4807 /* Tell HW to set timestamp in probe responses. */ 4808 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 4809 flags |= IWN_TX_INSERT_TSTAMP; 4810 4811 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 4812 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 4813 tx->timeout = htole16(3); 4814 else 4815 tx->timeout = htole16(2); 4816 } else 4817 tx->timeout = htole16(0); 4818 4819 if (hdrlen & 3) { 4820 /* First segment length must be a multiple of 4. */ 4821 flags |= IWN_TX_NEED_PADDING; 4822 pad = 4 - (hdrlen & 3); 4823 } else 4824 pad = 0; 4825 4826 if (ieee80211_radiotap_active_vap(vap)) { 4827 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 4828 4829 tap->wt_flags = 0; 4830 tap->wt_rate = rate; 4831 4832 ieee80211_radiotap_tx(vap, m); 4833 } 4834 4835 tx->len = htole16(totlen); 4836 tx->tid = 0; 4837 tx->id = sc->broadcast_id; 4838 tx->rts_ntries = params->ibp_try1; 4839 tx->data_ntries = params->ibp_try0; 4840 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4841 tx->rate = iwn_rate_to_plcp(sc, ni, rate); 4842 4843 /* Group or management frame. */ 4844 tx->linkq = 0; 4845 4846 /* Set physical address of "scratch area". */ 4847 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr)); 4848 tx->hiaddr = IWN_HIADDR(data->scratch_paddr); 4849 4850 /* Copy 802.11 header in TX command. */ 4851 memcpy((uint8_t *)(tx + 1), wh, hdrlen); 4852 4853 /* Trim 802.11 header. */ 4854 m_adj(m, hdrlen); 4855 tx->security = 0; 4856 tx->flags = htole32(flags); 4857 4858 #if defined(__DragonFly__) 4859 error = bus_dmamap_load_mbuf_segment(ring->data_dmat, data->map, 4860 m, segs, IWN_MAX_SCATTER - 1, 4861 &nsegs, BUS_DMA_NOWAIT); 4862 #else 4863 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs, 4864 &nsegs, BUS_DMA_NOWAIT); 4865 #endif 4866 if (error != 0) { 4867 if (error != EFBIG) { 4868 device_printf(sc->sc_dev, 4869 "%s: can't map mbuf (error %d)\n", __func__, error); 4870 m_freem(m); 4871 return error; 4872 } 4873 /* Too many DMA segments, linearize mbuf. */ 4874 #if defined(__DragonFly__) 4875 m1 = m_defrag(m, M_NOWAIT); 4876 #else 4877 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER); 4878 #endif 4879 if (m1 == NULL) { 4880 device_printf(sc->sc_dev, 4881 "%s: could not defrag mbuf\n", __func__); 4882 m_freem(m); 4883 return ENOBUFS; 4884 } 4885 m = m1; 4886 4887 #if defined(__DragonFly__) 4888 error = bus_dmamap_load_mbuf_segment(ring->data_dmat, 4889 data->map, m, 4890 segs, IWN_MAX_SCATTER - 1, 4891 &nsegs, BUS_DMA_NOWAIT); 4892 #else 4893 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, 4894 segs, &nsegs, BUS_DMA_NOWAIT); 4895 #endif 4896 if (error != 0) { 4897 device_printf(sc->sc_dev, 4898 "%s: can't map mbuf (error %d)\n", __func__, error); 4899 m_freem(m); 4900 return error; 4901 } 4902 } 4903 4904 data->m = m; 4905 data->ni = ni; 4906 4907 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: qid %d idx %d len %d nsegs %d\n", 4908 __func__, ring->qid, ring->cur, m->m_pkthdr.len, nsegs); 4909 4910 /* Fill TX descriptor. */ 4911 desc->nsegs = 1; 4912 if (m->m_len != 0) 4913 desc->nsegs += nsegs; 4914 /* First DMA segment is used by the TX command. */ 4915 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr)); 4916 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) | 4917 (4 + sizeof (*tx) + hdrlen + pad) << 4); 4918 /* Other DMA segments are for data payload. */ 4919 seg = &segs[0]; 4920 for (i = 1; i <= nsegs; i++) { 4921 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr)); 4922 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) | 4923 seg->ds_len << 4); 4924 seg++; 4925 } 4926 4927 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 4928 bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, 4929 BUS_DMASYNC_PREWRITE); 4930 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 4931 BUS_DMASYNC_PREWRITE); 4932 4933 /* Update TX scheduler. */ 4934 if (ring->qid >= sc->firstaggqueue) 4935 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen); 4936 4937 /* Kick TX ring. */ 4938 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 4939 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 4940 4941 /* Mark TX ring as full if we reach a certain threshold. */ 4942 if (++ring->queued > IWN_TX_RING_HIMARK) 4943 sc->qfullmsk |= 1 << ring->qid; 4944 4945 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 4946 4947 return 0; 4948 } 4949 4950 static int 4951 iwn_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 4952 const struct ieee80211_bpf_params *params) 4953 { 4954 struct ieee80211com *ic = ni->ni_ic; 4955 struct ifnet *ifp = ic->ic_ifp; 4956 struct iwn_softc *sc = ifp->if_softc; 4957 int error = 0; 4958 4959 DPRINTF(sc, IWN_DEBUG_XMIT | IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4960 4961 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 4962 ieee80211_free_node(ni); 4963 m_freem(m); 4964 return ENETDOWN; 4965 } 4966 4967 IWN_LOCK(sc); 4968 if (params == NULL) { 4969 /* 4970 * Legacy path; interpret frame contents to decide 4971 * precisely how to send the frame. 4972 */ 4973 error = iwn_tx_data(sc, m, ni); 4974 } else { 4975 /* 4976 * Caller supplied explicit parameters to use in 4977 * sending the frame. 4978 */ 4979 error = iwn_tx_data_raw(sc, m, ni, params); 4980 } 4981 if (error != 0) { 4982 /* NB: m is reclaimed on tx failure */ 4983 ieee80211_free_node(ni); 4984 #if defined(__DragonFly__) 4985 ++ifp->if_oerrors; 4986 #else 4987 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 4988 #endif 4989 } 4990 sc->sc_tx_timer = 5; 4991 4992 IWN_UNLOCK(sc); 4993 4994 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s: end\n",__func__); 4995 4996 return error; 4997 } 4998 4999 #if defined(__DragonFly__) 5000 static void 5001 iwn_start(struct ifnet *ifp, struct ifaltq_subque *ifsq) 5002 #else 5003 static void 5004 iwn_start(struct ifnet *ifp) 5005 #endif 5006 { 5007 struct iwn_softc *sc = ifp->if_softc; 5008 5009 IWN_LOCK(sc); 5010 iwn_start_locked(ifp); 5011 IWN_UNLOCK(sc); 5012 } 5013 5014 #if defined(__DragonFly__) 5015 5016 static void 5017 iwn_start_locked(struct ifnet *ifp) 5018 { 5019 struct iwn_softc *sc = ifp->if_softc; 5020 struct ieee80211_node *ni; 5021 struct mbuf *m; 5022 5023 IWN_LOCK_ASSERT(sc); 5024 5025 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: called\n", __func__); 5026 5027 if ((ifp->if_flags & IFF_RUNNING) == 0 || 5028 ifq_is_oactive(&ifp->if_snd)) 5029 return; 5030 5031 for (;;) { 5032 if (sc->qfullmsk != 0) { 5033 ifq_set_oactive(&ifp->if_snd); 5034 break; 5035 } 5036 m = ifq_dequeue(&ifp->if_snd); 5037 if (m == NULL) 5038 break; 5039 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 5040 if (iwn_tx_data(sc, m, ni) != 0) { 5041 ieee80211_free_node(ni); 5042 ++ifp->if_oerrors; 5043 continue; 5044 } 5045 sc->sc_tx_timer = 5; 5046 } 5047 5048 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: done\n", __func__); 5049 } 5050 5051 #else 5052 5053 static void 5054 iwn_start_locked(struct ifnet *ifp) 5055 { 5056 struct iwn_softc *sc = ifp->if_softc; 5057 struct ieee80211_node *ni; 5058 struct mbuf *m; 5059 5060 IWN_LOCK_ASSERT(sc); 5061 5062 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: called\n", __func__); 5063 5064 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || 5065 (ifp->if_drv_flags & IFF_DRV_OACTIVE)) 5066 return; 5067 5068 for (;;) { 5069 if (sc->qfullmsk != 0) { 5070 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 5071 break; 5072 } 5073 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); 5074 if (m == NULL) 5075 break; 5076 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 5077 if (iwn_tx_data(sc, m, ni) != 0) { 5078 ieee80211_free_node(ni); 5079 #if defined(__DragonFly__) 5080 ++ifp->if_oerrors; 5081 #else 5082 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 5083 #endif 5084 continue; 5085 } 5086 sc->sc_tx_timer = 5; 5087 } 5088 5089 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: done\n", __func__); 5090 } 5091 5092 #endif 5093 5094 static void 5095 iwn_watchdog(void *arg) 5096 { 5097 struct iwn_softc *sc = arg; 5098 struct ifnet *ifp = sc->sc_ifp; 5099 struct ieee80211com *ic = ifp->if_l2com; 5100 5101 IWN_LOCK_ASSERT(sc); 5102 5103 KASSERT(ifp->if_drv_flags & IFF_DRV_RUNNING, ("not running")); 5104 5105 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5106 5107 if (sc->sc_tx_timer > 0) { 5108 if (--sc->sc_tx_timer == 0) { 5109 if_printf(ifp, "device timeout\n"); 5110 ieee80211_runtask(ic, &sc->sc_reinit_task); 5111 return; 5112 } 5113 } 5114 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc); 5115 } 5116 5117 #if defined(__DragonFly__) 5118 static int 5119 iwn_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data, 5120 struct ucred *cred __unused) 5121 #else 5122 static int 5123 iwn_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 5124 #endif 5125 { 5126 struct iwn_softc *sc = ifp->if_softc; 5127 struct ieee80211com *ic = ifp->if_l2com; 5128 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 5129 struct ifreq *ifr = (struct ifreq *) data; 5130 int error = 0, startall = 0, stop = 0; 5131 5132 switch (cmd) { 5133 case SIOCGIFADDR: 5134 error = ether_ioctl(ifp, cmd, data); 5135 break; 5136 case SIOCSIFFLAGS: 5137 IWN_LOCK(sc); 5138 if (ifp->if_flags & IFF_UP) { 5139 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 5140 iwn_init_locked(sc); 5141 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL) 5142 startall = 1; 5143 else 5144 stop = 1; 5145 } 5146 } else { 5147 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 5148 iwn_stop_locked(sc); 5149 } 5150 IWN_UNLOCK(sc); 5151 if (startall) 5152 ieee80211_start_all(ic); 5153 else if (vap != NULL && stop) 5154 ieee80211_stop(vap); 5155 break; 5156 case SIOCGIFMEDIA: 5157 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); 5158 break; 5159 case SIOCGIWNSTATS: 5160 IWN_LOCK(sc); 5161 /* XXX validate permissions/memory/etc? */ 5162 error = copyout(&sc->last_stat, ifr->ifr_data, 5163 sizeof(struct iwn_stats)); 5164 IWN_UNLOCK(sc); 5165 break; 5166 case SIOCZIWNSTATS: 5167 IWN_LOCK(sc); 5168 memset(&sc->last_stat, 0, sizeof(struct iwn_stats)); 5169 IWN_UNLOCK(sc); 5170 error = 0; 5171 break; 5172 default: 5173 error = EINVAL; 5174 break; 5175 } 5176 return error; 5177 } 5178 5179 /* 5180 * Send a command to the firmware. 5181 */ 5182 static int 5183 iwn_cmd(struct iwn_softc *sc, int code, const void *buf, int size, int async) 5184 { 5185 struct iwn_tx_ring *ring; 5186 struct iwn_tx_desc *desc; 5187 struct iwn_tx_data *data; 5188 struct iwn_tx_cmd *cmd; 5189 struct mbuf *m; 5190 bus_addr_t paddr; 5191 int totlen, error; 5192 int cmd_queue_num; 5193 5194 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5195 5196 if (async == 0) 5197 IWN_LOCK_ASSERT(sc); 5198 5199 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 5200 cmd_queue_num = IWN_PAN_CMD_QUEUE; 5201 else 5202 cmd_queue_num = IWN_CMD_QUEUE_NUM; 5203 5204 ring = &sc->txq[cmd_queue_num]; 5205 desc = &ring->desc[ring->cur]; 5206 data = &ring->data[ring->cur]; 5207 totlen = 4 + size; 5208 5209 if (size > sizeof cmd->data) { 5210 /* Command is too large to fit in a descriptor. */ 5211 if (totlen > MCLBYTES) 5212 return EINVAL; 5213 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE); 5214 if (m == NULL) 5215 return ENOMEM; 5216 cmd = mtod(m, struct iwn_tx_cmd *); 5217 error = bus_dmamap_load(ring->data_dmat, data->map, cmd, 5218 totlen, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT); 5219 if (error != 0) { 5220 m_freem(m); 5221 return error; 5222 } 5223 data->m = m; 5224 } else { 5225 cmd = &ring->cmd[ring->cur]; 5226 paddr = data->cmd_paddr; 5227 } 5228 5229 cmd->code = code; 5230 cmd->flags = 0; 5231 cmd->qid = ring->qid; 5232 cmd->idx = ring->cur; 5233 memcpy(cmd->data, buf, size); 5234 5235 desc->nsegs = 1; 5236 desc->segs[0].addr = htole32(IWN_LOADDR(paddr)); 5237 desc->segs[0].len = htole16(IWN_HIADDR(paddr) | totlen << 4); 5238 5239 DPRINTF(sc, IWN_DEBUG_CMD, "%s: %s (0x%x) flags %d qid %d idx %d\n", 5240 __func__, iwn_intr_str(cmd->code), cmd->code, 5241 cmd->flags, cmd->qid, cmd->idx); 5242 5243 if (size > sizeof cmd->data) { 5244 bus_dmamap_sync(ring->data_dmat, data->map, 5245 BUS_DMASYNC_PREWRITE); 5246 } else { 5247 bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, 5248 BUS_DMASYNC_PREWRITE); 5249 } 5250 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 5251 BUS_DMASYNC_PREWRITE); 5252 5253 /* Kick command ring. */ 5254 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 5255 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 5256 5257 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5258 5259 return async ? 0 : iwn_sleep(sc, desc, PCATCH, "iwncmd", hz); 5260 } 5261 5262 static int 5263 iwn4965_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 5264 { 5265 struct iwn4965_node_info hnode; 5266 caddr_t src, dst; 5267 5268 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5269 5270 /* 5271 * We use the node structure for 5000 Series internally (it is 5272 * a superset of the one for 4965AGN). We thus copy the common 5273 * fields before sending the command. 5274 */ 5275 src = (caddr_t)node; 5276 dst = (caddr_t)&hnode; 5277 memcpy(dst, src, 48); 5278 /* Skip TSC, RX MIC and TX MIC fields from ``src''. */ 5279 memcpy(dst + 48, src + 72, 20); 5280 return iwn_cmd(sc, IWN_CMD_ADD_NODE, &hnode, sizeof hnode, async); 5281 } 5282 5283 static int 5284 iwn5000_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 5285 { 5286 5287 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5288 5289 /* Direct mapping. */ 5290 return iwn_cmd(sc, IWN_CMD_ADD_NODE, node, sizeof (*node), async); 5291 } 5292 5293 static int 5294 iwn_set_link_quality(struct iwn_softc *sc, struct ieee80211_node *ni) 5295 { 5296 #define RV(v) ((v) & IEEE80211_RATE_VAL) 5297 struct iwn_node *wn = (void *)ni; 5298 struct ieee80211_rateset *rs; 5299 struct iwn_cmd_link_quality linkq; 5300 int i, rate, txrate; 5301 int is_11n; 5302 5303 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5304 5305 memset(&linkq, 0, sizeof linkq); 5306 linkq.id = wn->id; 5307 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc); 5308 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc); 5309 5310 linkq.ampdu_max = 32; /* XXX negotiated? */ 5311 linkq.ampdu_threshold = 3; 5312 linkq.ampdu_limit = htole16(4000); /* 4ms */ 5313 5314 DPRINTF(sc, IWN_DEBUG_XMIT, 5315 "%s: 1stream antenna=0x%02x, 2stream antenna=0x%02x, ntxstreams=%d\n", 5316 __func__, 5317 linkq.antmsk_1stream, 5318 linkq.antmsk_2stream, 5319 sc->ntxchains); 5320 5321 /* 5322 * Are we using 11n rates? Ensure the channel is 5323 * 11n _and_ we have some 11n rates, or don't 5324 * try. 5325 */ 5326 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) { 5327 rs = (struct ieee80211_rateset *) &ni->ni_htrates; 5328 is_11n = 1; 5329 } else { 5330 rs = &ni->ni_rates; 5331 is_11n = 0; 5332 } 5333 5334 /* Start at highest available bit-rate. */ 5335 /* 5336 * XXX this is all very dirty! 5337 */ 5338 if (is_11n) 5339 txrate = ni->ni_htrates.rs_nrates - 1; 5340 else 5341 txrate = rs->rs_nrates - 1; 5342 for (i = 0; i < IWN_MAX_TX_RETRIES; i++) { 5343 uint32_t plcp; 5344 5345 /* 5346 * XXX TODO: ensure the last two slots are the two lowest 5347 * rate entries, just for now. 5348 */ 5349 if (i == 14 || i == 15) 5350 txrate = 0; 5351 5352 if (is_11n) 5353 rate = IEEE80211_RATE_MCS | rs->rs_rates[txrate]; 5354 else 5355 rate = RV(rs->rs_rates[txrate]); 5356 5357 /* Do rate -> PLCP config mapping */ 5358 plcp = iwn_rate_to_plcp(sc, ni, rate); 5359 linkq.retry[i] = plcp; 5360 DPRINTF(sc, IWN_DEBUG_XMIT, 5361 "%s: i=%d, txrate=%d, rate=0x%02x, plcp=0x%08x\n", 5362 __func__, 5363 i, 5364 txrate, 5365 rate, 5366 le32toh(plcp)); 5367 5368 /* 5369 * The mimo field is an index into the table which 5370 * indicates the first index where it and subsequent entries 5371 * will not be using MIMO. 5372 * 5373 * Since we're filling linkq from 0..15 and we're filling 5374 * from the higest MCS rates to the lowest rates, if we 5375 * _are_ doing a dual-stream rate, set mimo to idx+1 (ie, 5376 * the next entry.) That way if the next entry is a non-MIMO 5377 * entry, we're already pointing at it. 5378 */ 5379 if ((le32toh(plcp) & IWN_RFLAG_MCS) && 5380 RV(le32toh(plcp)) > 7) 5381 linkq.mimo = i + 1; 5382 5383 /* Next retry at immediate lower bit-rate. */ 5384 if (txrate > 0) 5385 txrate--; 5386 } 5387 /* 5388 * If we reached the end of the list and indeed we hit 5389 * all MIMO rates (eg 5300 doing MCS23-15) then yes, 5390 * set mimo to 15. Setting it to 16 panics the firmware. 5391 */ 5392 if (linkq.mimo > 15) 5393 linkq.mimo = 15; 5394 5395 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: mimo = %d\n", __func__, linkq.mimo); 5396 5397 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5398 5399 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, 1); 5400 #undef RV 5401 } 5402 5403 /* 5404 * Broadcast node is used to send group-addressed and management frames. 5405 */ 5406 static int 5407 iwn_add_broadcast_node(struct iwn_softc *sc, int async) 5408 { 5409 struct iwn_ops *ops = &sc->ops; 5410 struct ifnet *ifp = sc->sc_ifp; 5411 struct ieee80211com *ic = ifp->if_l2com; 5412 struct iwn_node_info node; 5413 struct iwn_cmd_link_quality linkq; 5414 uint8_t txant; 5415 int i, error; 5416 5417 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5418 5419 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 5420 5421 memset(&node, 0, sizeof node); 5422 IEEE80211_ADDR_COPY(node.macaddr, ifp->if_broadcastaddr); 5423 node.id = sc->broadcast_id; 5424 DPRINTF(sc, IWN_DEBUG_RESET, "%s: adding broadcast node\n", __func__); 5425 if ((error = ops->add_node(sc, &node, async)) != 0) 5426 return error; 5427 5428 /* Use the first valid TX antenna. */ 5429 txant = IWN_LSB(sc->txchainmask); 5430 5431 memset(&linkq, 0, sizeof linkq); 5432 linkq.id = sc->broadcast_id; 5433 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc); 5434 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc); 5435 linkq.ampdu_max = 64; 5436 linkq.ampdu_threshold = 3; 5437 linkq.ampdu_limit = htole16(4000); /* 4ms */ 5438 5439 /* Use lowest mandatory bit-rate. */ 5440 /* XXX rate table lookup? */ 5441 if (IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan)) 5442 linkq.retry[0] = htole32(0xd); 5443 else 5444 linkq.retry[0] = htole32(10 | IWN_RFLAG_CCK); 5445 linkq.retry[0] |= htole32(IWN_RFLAG_ANT(txant)); 5446 /* Use same bit-rate for all TX retries. */ 5447 for (i = 1; i < IWN_MAX_TX_RETRIES; i++) { 5448 linkq.retry[i] = linkq.retry[0]; 5449 } 5450 5451 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5452 5453 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, async); 5454 } 5455 5456 static int 5457 iwn_updateedca(struct ieee80211com *ic) 5458 { 5459 #define IWN_EXP2(x) ((1 << (x)) - 1) /* CWmin = 2^ECWmin - 1 */ 5460 struct iwn_softc *sc = ic->ic_ifp->if_softc; 5461 struct iwn_edca_params cmd; 5462 int aci; 5463 5464 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5465 5466 memset(&cmd, 0, sizeof cmd); 5467 cmd.flags = htole32(IWN_EDCA_UPDATE); 5468 for (aci = 0; aci < WME_NUM_AC; aci++) { 5469 const struct wmeParams *ac = 5470 &ic->ic_wme.wme_chanParams.cap_wmeParams[aci]; 5471 cmd.ac[aci].aifsn = ac->wmep_aifsn; 5472 cmd.ac[aci].cwmin = htole16(IWN_EXP2(ac->wmep_logcwmin)); 5473 cmd.ac[aci].cwmax = htole16(IWN_EXP2(ac->wmep_logcwmax)); 5474 cmd.ac[aci].txoplimit = 5475 htole16(IEEE80211_TXOP_TO_US(ac->wmep_txopLimit)); 5476 } 5477 IEEE80211_UNLOCK(ic); 5478 IWN_LOCK(sc); 5479 (void)iwn_cmd(sc, IWN_CMD_EDCA_PARAMS, &cmd, sizeof cmd, 1); 5480 IWN_UNLOCK(sc); 5481 IEEE80211_LOCK(ic); 5482 5483 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5484 5485 return 0; 5486 #undef IWN_EXP2 5487 } 5488 5489 static void 5490 iwn_update_mcast(struct ifnet *ifp) 5491 { 5492 /* Ignore */ 5493 } 5494 5495 static void 5496 iwn_set_led(struct iwn_softc *sc, uint8_t which, uint8_t off, uint8_t on) 5497 { 5498 struct iwn_cmd_led led; 5499 5500 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5501 5502 #if 0 5503 /* XXX don't set LEDs during scan? */ 5504 if (sc->sc_is_scanning) 5505 return; 5506 #endif 5507 5508 /* Clear microcode LED ownership. */ 5509 IWN_CLRBITS(sc, IWN_LED, IWN_LED_BSM_CTRL); 5510 5511 led.which = which; 5512 led.unit = htole32(10000); /* on/off in unit of 100ms */ 5513 led.off = off; 5514 led.on = on; 5515 (void)iwn_cmd(sc, IWN_CMD_SET_LED, &led, sizeof led, 1); 5516 } 5517 5518 /* 5519 * Set the critical temperature at which the firmware will stop the radio 5520 * and notify us. 5521 */ 5522 static int 5523 iwn_set_critical_temp(struct iwn_softc *sc) 5524 { 5525 struct iwn_critical_temp crit; 5526 int32_t temp; 5527 5528 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5529 5530 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CTEMP_STOP_RF); 5531 5532 if (sc->hw_type == IWN_HW_REV_TYPE_5150) 5533 temp = (IWN_CTOK(110) - sc->temp_off) * -5; 5534 else if (sc->hw_type == IWN_HW_REV_TYPE_4965) 5535 temp = IWN_CTOK(110); 5536 else 5537 temp = 110; 5538 memset(&crit, 0, sizeof crit); 5539 crit.tempR = htole32(temp); 5540 DPRINTF(sc, IWN_DEBUG_RESET, "setting critical temp to %d\n", temp); 5541 return iwn_cmd(sc, IWN_CMD_SET_CRITICAL_TEMP, &crit, sizeof crit, 0); 5542 } 5543 5544 static int 5545 iwn_set_timing(struct iwn_softc *sc, struct ieee80211_node *ni) 5546 { 5547 struct iwn_cmd_timing cmd; 5548 uint64_t val, mod; 5549 5550 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5551 5552 memset(&cmd, 0, sizeof cmd); 5553 memcpy(&cmd.tstamp, ni->ni_tstamp.data, sizeof (uint64_t)); 5554 cmd.bintval = htole16(ni->ni_intval); 5555 cmd.lintval = htole16(10); 5556 5557 /* Compute remaining time until next beacon. */ 5558 val = (uint64_t)ni->ni_intval * IEEE80211_DUR_TU; 5559 mod = le64toh(cmd.tstamp) % val; 5560 cmd.binitval = htole32((uint32_t)(val - mod)); 5561 5562 DPRINTF(sc, IWN_DEBUG_RESET, "timing bintval=%u tstamp=%ju, init=%u\n", 5563 ni->ni_intval, le64toh(cmd.tstamp), (uint32_t)(val - mod)); 5564 5565 return iwn_cmd(sc, IWN_CMD_TIMING, &cmd, sizeof cmd, 1); 5566 } 5567 5568 static void 5569 iwn4965_power_calibration(struct iwn_softc *sc, int temp) 5570 { 5571 struct ifnet *ifp = sc->sc_ifp; 5572 struct ieee80211com *ic = ifp->if_l2com; 5573 5574 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5575 5576 /* Adjust TX power if need be (delta >= 3 degC). */ 5577 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d->%d\n", 5578 __func__, sc->temp, temp); 5579 if (abs(temp - sc->temp) >= 3) { 5580 /* Record temperature of last calibration. */ 5581 sc->temp = temp; 5582 (void)iwn4965_set_txpower(sc, ic->ic_bsschan, 1); 5583 } 5584 } 5585 5586 /* 5587 * Set TX power for current channel (each rate has its own power settings). 5588 * This function takes into account the regulatory information from EEPROM, 5589 * the current temperature and the current voltage. 5590 */ 5591 static int 5592 iwn4965_set_txpower(struct iwn_softc *sc, struct ieee80211_channel *ch, 5593 int async) 5594 { 5595 /* Fixed-point arithmetic division using a n-bit fractional part. */ 5596 #define fdivround(a, b, n) \ 5597 ((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n)) 5598 /* Linear interpolation. */ 5599 #define interpolate(x, x1, y1, x2, y2, n) \ 5600 ((y1) + fdivround(((int)(x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n)) 5601 5602 static const int tdiv[IWN_NATTEN_GROUPS] = { 9, 8, 8, 8, 6 }; 5603 struct iwn_ucode_info *uc = &sc->ucode_info; 5604 struct iwn4965_cmd_txpower cmd; 5605 struct iwn4965_eeprom_chan_samples *chans; 5606 const uint8_t *rf_gain, *dsp_gain; 5607 int32_t vdiff, tdiff; 5608 int i, c, grp, maxpwr; 5609 uint8_t chan; 5610 5611 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 5612 /* Retrieve current channel from last RXON. */ 5613 chan = sc->rxon->chan; 5614 DPRINTF(sc, IWN_DEBUG_RESET, "setting TX power for channel %d\n", 5615 chan); 5616 5617 memset(&cmd, 0, sizeof cmd); 5618 cmd.band = IEEE80211_IS_CHAN_5GHZ(ch) ? 0 : 1; 5619 cmd.chan = chan; 5620 5621 if (IEEE80211_IS_CHAN_5GHZ(ch)) { 5622 maxpwr = sc->maxpwr5GHz; 5623 rf_gain = iwn4965_rf_gain_5ghz; 5624 dsp_gain = iwn4965_dsp_gain_5ghz; 5625 } else { 5626 maxpwr = sc->maxpwr2GHz; 5627 rf_gain = iwn4965_rf_gain_2ghz; 5628 dsp_gain = iwn4965_dsp_gain_2ghz; 5629 } 5630 5631 /* Compute voltage compensation. */ 5632 vdiff = ((int32_t)le32toh(uc->volt) - sc->eeprom_voltage) / 7; 5633 if (vdiff > 0) 5634 vdiff *= 2; 5635 if (abs(vdiff) > 2) 5636 vdiff = 0; 5637 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5638 "%s: voltage compensation=%d (UCODE=%d, EEPROM=%d)\n", 5639 __func__, vdiff, le32toh(uc->volt), sc->eeprom_voltage); 5640 5641 /* Get channel attenuation group. */ 5642 if (chan <= 20) /* 1-20 */ 5643 grp = 4; 5644 else if (chan <= 43) /* 34-43 */ 5645 grp = 0; 5646 else if (chan <= 70) /* 44-70 */ 5647 grp = 1; 5648 else if (chan <= 124) /* 71-124 */ 5649 grp = 2; 5650 else /* 125-200 */ 5651 grp = 3; 5652 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5653 "%s: chan %d, attenuation group=%d\n", __func__, chan, grp); 5654 5655 /* Get channel sub-band. */ 5656 for (i = 0; i < IWN_NBANDS; i++) 5657 if (sc->bands[i].lo != 0 && 5658 sc->bands[i].lo <= chan && chan <= sc->bands[i].hi) 5659 break; 5660 if (i == IWN_NBANDS) /* Can't happen in real-life. */ 5661 return EINVAL; 5662 chans = sc->bands[i].chans; 5663 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5664 "%s: chan %d sub-band=%d\n", __func__, chan, i); 5665 5666 for (c = 0; c < 2; c++) { 5667 uint8_t power, gain, temp; 5668 int maxchpwr, pwr, ridx, idx; 5669 5670 power = interpolate(chan, 5671 chans[0].num, chans[0].samples[c][1].power, 5672 chans[1].num, chans[1].samples[c][1].power, 1); 5673 gain = interpolate(chan, 5674 chans[0].num, chans[0].samples[c][1].gain, 5675 chans[1].num, chans[1].samples[c][1].gain, 1); 5676 temp = interpolate(chan, 5677 chans[0].num, chans[0].samples[c][1].temp, 5678 chans[1].num, chans[1].samples[c][1].temp, 1); 5679 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5680 "%s: Tx chain %d: power=%d gain=%d temp=%d\n", 5681 __func__, c, power, gain, temp); 5682 5683 /* Compute temperature compensation. */ 5684 tdiff = ((sc->temp - temp) * 2) / tdiv[grp]; 5685 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5686 "%s: temperature compensation=%d (current=%d, EEPROM=%d)\n", 5687 __func__, tdiff, sc->temp, temp); 5688 5689 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) { 5690 /* Convert dBm to half-dBm. */ 5691 maxchpwr = sc->maxpwr[chan] * 2; 5692 if ((ridx / 8) & 1) 5693 maxchpwr -= 6; /* MIMO 2T: -3dB */ 5694 5695 pwr = maxpwr; 5696 5697 /* Adjust TX power based on rate. */ 5698 if ((ridx % 8) == 5) 5699 pwr -= 15; /* OFDM48: -7.5dB */ 5700 else if ((ridx % 8) == 6) 5701 pwr -= 17; /* OFDM54: -8.5dB */ 5702 else if ((ridx % 8) == 7) 5703 pwr -= 20; /* OFDM60: -10dB */ 5704 else 5705 pwr -= 10; /* Others: -5dB */ 5706 5707 /* Do not exceed channel max TX power. */ 5708 if (pwr > maxchpwr) 5709 pwr = maxchpwr; 5710 5711 idx = gain - (pwr - power) - tdiff - vdiff; 5712 if ((ridx / 8) & 1) /* MIMO */ 5713 idx += (int32_t)le32toh(uc->atten[grp][c]); 5714 5715 if (cmd.band == 0) 5716 idx += 9; /* 5GHz */ 5717 if (ridx == IWN_RIDX_MAX) 5718 idx += 5; /* CCK */ 5719 5720 /* Make sure idx stays in a valid range. */ 5721 if (idx < 0) 5722 idx = 0; 5723 else if (idx > IWN4965_MAX_PWR_INDEX) 5724 idx = IWN4965_MAX_PWR_INDEX; 5725 5726 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5727 "%s: Tx chain %d, rate idx %d: power=%d\n", 5728 __func__, c, ridx, idx); 5729 cmd.power[ridx].rf_gain[c] = rf_gain[idx]; 5730 cmd.power[ridx].dsp_gain[c] = dsp_gain[idx]; 5731 } 5732 } 5733 5734 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5735 "%s: set tx power for chan %d\n", __func__, chan); 5736 return iwn_cmd(sc, IWN_CMD_TXPOWER, &cmd, sizeof cmd, async); 5737 5738 #undef interpolate 5739 #undef fdivround 5740 } 5741 5742 static int 5743 iwn5000_set_txpower(struct iwn_softc *sc, struct ieee80211_channel *ch, 5744 int async) 5745 { 5746 struct iwn5000_cmd_txpower cmd; 5747 int cmdid; 5748 5749 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5750 5751 /* 5752 * TX power calibration is handled automatically by the firmware 5753 * for 5000 Series. 5754 */ 5755 memset(&cmd, 0, sizeof cmd); 5756 cmd.global_limit = 2 * IWN5000_TXPOWER_MAX_DBM; /* 16 dBm */ 5757 cmd.flags = IWN5000_TXPOWER_NO_CLOSED; 5758 cmd.srv_limit = IWN5000_TXPOWER_AUTO; 5759 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 5760 "%s: setting TX power; rev=%d\n", 5761 __func__, 5762 IWN_UCODE_API(sc->ucode_rev)); 5763 if (IWN_UCODE_API(sc->ucode_rev) == 1) 5764 cmdid = IWN_CMD_TXPOWER_DBM_V1; 5765 else 5766 cmdid = IWN_CMD_TXPOWER_DBM; 5767 return iwn_cmd(sc, cmdid, &cmd, sizeof cmd, async); 5768 } 5769 5770 /* 5771 * Retrieve the maximum RSSI (in dBm) among receivers. 5772 */ 5773 static int 5774 iwn4965_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat) 5775 { 5776 struct iwn4965_rx_phystat *phy = (void *)stat->phybuf; 5777 uint8_t mask, agc; 5778 int rssi; 5779 5780 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5781 5782 mask = (le16toh(phy->antenna) >> 4) & IWN_ANT_ABC; 5783 agc = (le16toh(phy->agc) >> 7) & 0x7f; 5784 5785 rssi = 0; 5786 if (mask & IWN_ANT_A) 5787 rssi = MAX(rssi, phy->rssi[0]); 5788 if (mask & IWN_ANT_B) 5789 rssi = MAX(rssi, phy->rssi[2]); 5790 if (mask & IWN_ANT_C) 5791 rssi = MAX(rssi, phy->rssi[4]); 5792 5793 DPRINTF(sc, IWN_DEBUG_RECV, 5794 "%s: agc %d mask 0x%x rssi %d %d %d result %d\n", __func__, agc, 5795 mask, phy->rssi[0], phy->rssi[2], phy->rssi[4], 5796 rssi - agc - IWN_RSSI_TO_DBM); 5797 return rssi - agc - IWN_RSSI_TO_DBM; 5798 } 5799 5800 static int 5801 iwn5000_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat) 5802 { 5803 struct iwn5000_rx_phystat *phy = (void *)stat->phybuf; 5804 uint8_t agc; 5805 int rssi; 5806 5807 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5808 5809 agc = (le32toh(phy->agc) >> 9) & 0x7f; 5810 5811 rssi = MAX(le16toh(phy->rssi[0]) & 0xff, 5812 le16toh(phy->rssi[1]) & 0xff); 5813 rssi = MAX(le16toh(phy->rssi[2]) & 0xff, rssi); 5814 5815 DPRINTF(sc, IWN_DEBUG_RECV, 5816 "%s: agc %d rssi %d %d %d result %d\n", __func__, agc, 5817 phy->rssi[0], phy->rssi[1], phy->rssi[2], 5818 rssi - agc - IWN_RSSI_TO_DBM); 5819 return rssi - agc - IWN_RSSI_TO_DBM; 5820 } 5821 5822 /* 5823 * Retrieve the average noise (in dBm) among receivers. 5824 */ 5825 static int 5826 iwn_get_noise(const struct iwn_rx_general_stats *stats) 5827 { 5828 int i, total, nbant, noise; 5829 5830 total = nbant = 0; 5831 for (i = 0; i < 3; i++) { 5832 if ((noise = le32toh(stats->noise[i]) & 0xff) == 0) 5833 continue; 5834 total += noise; 5835 nbant++; 5836 } 5837 /* There should be at least one antenna but check anyway. */ 5838 return (nbant == 0) ? -127 : (total / nbant) - 107; 5839 } 5840 5841 /* 5842 * Compute temperature (in degC) from last received statistics. 5843 */ 5844 static int 5845 iwn4965_get_temperature(struct iwn_softc *sc) 5846 { 5847 struct iwn_ucode_info *uc = &sc->ucode_info; 5848 int32_t r1, r2, r3, r4, temp; 5849 5850 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5851 5852 r1 = le32toh(uc->temp[0].chan20MHz); 5853 r2 = le32toh(uc->temp[1].chan20MHz); 5854 r3 = le32toh(uc->temp[2].chan20MHz); 5855 r4 = le32toh(sc->rawtemp); 5856 5857 if (r1 == r3) /* Prevents division by 0 (should not happen). */ 5858 return 0; 5859 5860 /* Sign-extend 23-bit R4 value to 32-bit. */ 5861 r4 = ((r4 & 0xffffff) ^ 0x800000) - 0x800000; 5862 /* Compute temperature in Kelvin. */ 5863 temp = (259 * (r4 - r2)) / (r3 - r1); 5864 temp = (temp * 97) / 100 + 8; 5865 5866 DPRINTF(sc, IWN_DEBUG_ANY, "temperature %dK/%dC\n", temp, 5867 IWN_KTOC(temp)); 5868 return IWN_KTOC(temp); 5869 } 5870 5871 static int 5872 iwn5000_get_temperature(struct iwn_softc *sc) 5873 { 5874 int32_t temp; 5875 5876 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5877 5878 /* 5879 * Temperature is not used by the driver for 5000 Series because 5880 * TX power calibration is handled by firmware. 5881 */ 5882 temp = le32toh(sc->rawtemp); 5883 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 5884 temp = (temp / -5) + sc->temp_off; 5885 temp = IWN_KTOC(temp); 5886 } 5887 return temp; 5888 } 5889 5890 /* 5891 * Initialize sensitivity calibration state machine. 5892 */ 5893 static int 5894 iwn_init_sensitivity(struct iwn_softc *sc) 5895 { 5896 struct iwn_ops *ops = &sc->ops; 5897 struct iwn_calib_state *calib = &sc->calib; 5898 uint32_t flags; 5899 int error; 5900 5901 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5902 5903 /* Reset calibration state machine. */ 5904 memset(calib, 0, sizeof (*calib)); 5905 calib->state = IWN_CALIB_STATE_INIT; 5906 calib->cck_state = IWN_CCK_STATE_HIFA; 5907 /* Set initial correlation values. */ 5908 calib->ofdm_x1 = sc->limits->min_ofdm_x1; 5909 calib->ofdm_mrc_x1 = sc->limits->min_ofdm_mrc_x1; 5910 calib->ofdm_x4 = sc->limits->min_ofdm_x4; 5911 calib->ofdm_mrc_x4 = sc->limits->min_ofdm_mrc_x4; 5912 calib->cck_x4 = 125; 5913 calib->cck_mrc_x4 = sc->limits->min_cck_mrc_x4; 5914 calib->energy_cck = sc->limits->energy_cck; 5915 5916 /* Write initial sensitivity. */ 5917 if ((error = iwn_send_sensitivity(sc)) != 0) 5918 return error; 5919 5920 /* Write initial gains. */ 5921 if ((error = ops->init_gains(sc)) != 0) 5922 return error; 5923 5924 /* Request statistics at each beacon interval. */ 5925 flags = 0; 5926 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending request for statistics\n", 5927 __func__); 5928 return iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, sizeof flags, 1); 5929 } 5930 5931 /* 5932 * Collect noise and RSSI statistics for the first 20 beacons received 5933 * after association and use them to determine connected antennas and 5934 * to set differential gains. 5935 */ 5936 static void 5937 iwn_collect_noise(struct iwn_softc *sc, 5938 const struct iwn_rx_general_stats *stats) 5939 { 5940 struct iwn_ops *ops = &sc->ops; 5941 struct iwn_calib_state *calib = &sc->calib; 5942 struct ifnet *ifp = sc->sc_ifp; 5943 struct ieee80211com *ic = ifp->if_l2com; 5944 uint32_t val; 5945 int i; 5946 5947 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5948 5949 /* Accumulate RSSI and noise for all 3 antennas. */ 5950 for (i = 0; i < 3; i++) { 5951 calib->rssi[i] += le32toh(stats->rssi[i]) & 0xff; 5952 calib->noise[i] += le32toh(stats->noise[i]) & 0xff; 5953 } 5954 /* NB: We update differential gains only once after 20 beacons. */ 5955 if (++calib->nbeacons < 20) 5956 return; 5957 5958 /* Determine highest average RSSI. */ 5959 val = MAX(calib->rssi[0], calib->rssi[1]); 5960 val = MAX(calib->rssi[2], val); 5961 5962 /* Determine which antennas are connected. */ 5963 sc->chainmask = sc->rxchainmask; 5964 for (i = 0; i < 3; i++) 5965 if (val - calib->rssi[i] > 15 * 20) 5966 sc->chainmask &= ~(1 << i); 5967 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 5968 "%s: RX chains mask: theoretical=0x%x, actual=0x%x\n", 5969 __func__, sc->rxchainmask, sc->chainmask); 5970 5971 /* If none of the TX antennas are connected, keep at least one. */ 5972 if ((sc->chainmask & sc->txchainmask) == 0) 5973 sc->chainmask |= IWN_LSB(sc->txchainmask); 5974 5975 (void)ops->set_gains(sc); 5976 calib->state = IWN_CALIB_STATE_RUN; 5977 5978 #ifdef notyet 5979 /* XXX Disable RX chains with no antennas connected. */ 5980 sc->rxon->rxchain = htole16(IWN_RXCHAIN_SEL(sc->chainmask)); 5981 if (sc->sc_is_scanning) 5982 device_printf(sc->sc_dev, 5983 "%s: is_scanning set, before RXON\n", 5984 __func__); 5985 (void)iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 5986 #endif 5987 5988 /* Enable power-saving mode if requested by user. */ 5989 if (ic->ic_flags & IEEE80211_F_PMGTON) 5990 (void)iwn_set_pslevel(sc, 0, 3, 1); 5991 5992 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5993 5994 } 5995 5996 static int 5997 iwn4965_init_gains(struct iwn_softc *sc) 5998 { 5999 struct iwn_phy_calib_gain cmd; 6000 6001 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6002 6003 memset(&cmd, 0, sizeof cmd); 6004 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 6005 /* Differential gains initially set to 0 for all 3 antennas. */ 6006 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6007 "%s: setting initial differential gains\n", __func__); 6008 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6009 } 6010 6011 static int 6012 iwn5000_init_gains(struct iwn_softc *sc) 6013 { 6014 struct iwn_phy_calib cmd; 6015 6016 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6017 6018 memset(&cmd, 0, sizeof cmd); 6019 cmd.code = sc->reset_noise_gain; 6020 cmd.ngroups = 1; 6021 cmd.isvalid = 1; 6022 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6023 "%s: setting initial differential gains\n", __func__); 6024 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6025 } 6026 6027 static int 6028 iwn4965_set_gains(struct iwn_softc *sc) 6029 { 6030 struct iwn_calib_state *calib = &sc->calib; 6031 struct iwn_phy_calib_gain cmd; 6032 int i, delta, noise; 6033 6034 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6035 6036 /* Get minimal noise among connected antennas. */ 6037 noise = INT_MAX; /* NB: There's at least one antenna. */ 6038 for (i = 0; i < 3; i++) 6039 if (sc->chainmask & (1 << i)) 6040 noise = MIN(calib->noise[i], noise); 6041 6042 memset(&cmd, 0, sizeof cmd); 6043 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 6044 /* Set differential gains for connected antennas. */ 6045 for (i = 0; i < 3; i++) { 6046 if (sc->chainmask & (1 << i)) { 6047 /* Compute attenuation (in unit of 1.5dB). */ 6048 delta = (noise - (int32_t)calib->noise[i]) / 30; 6049 /* NB: delta <= 0 */ 6050 /* Limit to [-4.5dB,0]. */ 6051 cmd.gain[i] = MIN(abs(delta), 3); 6052 if (delta < 0) 6053 cmd.gain[i] |= 1 << 2; /* sign bit */ 6054 } 6055 } 6056 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6057 "setting differential gains Ant A/B/C: %x/%x/%x (%x)\n", 6058 cmd.gain[0], cmd.gain[1], cmd.gain[2], sc->chainmask); 6059 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6060 } 6061 6062 static int 6063 iwn5000_set_gains(struct iwn_softc *sc) 6064 { 6065 struct iwn_calib_state *calib = &sc->calib; 6066 struct iwn_phy_calib_gain cmd; 6067 int i, ant, div, delta; 6068 6069 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6070 6071 /* We collected 20 beacons and !=6050 need a 1.5 factor. */ 6072 div = (sc->hw_type == IWN_HW_REV_TYPE_6050) ? 20 : 30; 6073 6074 memset(&cmd, 0, sizeof cmd); 6075 cmd.code = sc->noise_gain; 6076 cmd.ngroups = 1; 6077 cmd.isvalid = 1; 6078 /* Get first available RX antenna as referential. */ 6079 ant = IWN_LSB(sc->rxchainmask); 6080 /* Set differential gains for other antennas. */ 6081 for (i = ant + 1; i < 3; i++) { 6082 if (sc->chainmask & (1 << i)) { 6083 /* The delta is relative to antenna "ant". */ 6084 delta = ((int32_t)calib->noise[ant] - 6085 (int32_t)calib->noise[i]) / div; 6086 /* Limit to [-4.5dB,+4.5dB]. */ 6087 cmd.gain[i - 1] = MIN(abs(delta), 3); 6088 if (delta < 0) 6089 cmd.gain[i - 1] |= 1 << 2; /* sign bit */ 6090 } 6091 } 6092 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 6093 "setting differential gains Ant B/C: %x/%x (%x)\n", 6094 cmd.gain[0], cmd.gain[1], sc->chainmask); 6095 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6096 } 6097 6098 /* 6099 * Tune RF RX sensitivity based on the number of false alarms detected 6100 * during the last beacon period. 6101 */ 6102 static void 6103 iwn_tune_sensitivity(struct iwn_softc *sc, const struct iwn_rx_stats *stats) 6104 { 6105 #define inc(val, inc, max) \ 6106 if ((val) < (max)) { \ 6107 if ((val) < (max) - (inc)) \ 6108 (val) += (inc); \ 6109 else \ 6110 (val) = (max); \ 6111 needs_update = 1; \ 6112 } 6113 #define dec(val, dec, min) \ 6114 if ((val) > (min)) { \ 6115 if ((val) > (min) + (dec)) \ 6116 (val) -= (dec); \ 6117 else \ 6118 (val) = (min); \ 6119 needs_update = 1; \ 6120 } 6121 6122 const struct iwn_sensitivity_limits *limits = sc->limits; 6123 struct iwn_calib_state *calib = &sc->calib; 6124 uint32_t val, rxena, fa; 6125 uint32_t energy[3], energy_min; 6126 uint8_t noise[3], noise_ref; 6127 int i, needs_update = 0; 6128 6129 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6130 6131 /* Check that we've been enabled long enough. */ 6132 if ((rxena = le32toh(stats->general.load)) == 0){ 6133 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end not so long\n", __func__); 6134 return; 6135 } 6136 6137 /* Compute number of false alarms since last call for OFDM. */ 6138 fa = le32toh(stats->ofdm.bad_plcp) - calib->bad_plcp_ofdm; 6139 fa += le32toh(stats->ofdm.fa) - calib->fa_ofdm; 6140 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */ 6141 6142 if (fa > 50 * rxena) { 6143 /* High false alarm count, decrease sensitivity. */ 6144 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6145 "%s: OFDM high false alarm count: %u\n", __func__, fa); 6146 inc(calib->ofdm_x1, 1, limits->max_ofdm_x1); 6147 inc(calib->ofdm_mrc_x1, 1, limits->max_ofdm_mrc_x1); 6148 inc(calib->ofdm_x4, 1, limits->max_ofdm_x4); 6149 inc(calib->ofdm_mrc_x4, 1, limits->max_ofdm_mrc_x4); 6150 6151 } else if (fa < 5 * rxena) { 6152 /* Low false alarm count, increase sensitivity. */ 6153 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6154 "%s: OFDM low false alarm count: %u\n", __func__, fa); 6155 dec(calib->ofdm_x1, 1, limits->min_ofdm_x1); 6156 dec(calib->ofdm_mrc_x1, 1, limits->min_ofdm_mrc_x1); 6157 dec(calib->ofdm_x4, 1, limits->min_ofdm_x4); 6158 dec(calib->ofdm_mrc_x4, 1, limits->min_ofdm_mrc_x4); 6159 } 6160 6161 /* Compute maximum noise among 3 receivers. */ 6162 for (i = 0; i < 3; i++) 6163 noise[i] = (le32toh(stats->general.noise[i]) >> 8) & 0xff; 6164 val = MAX(noise[0], noise[1]); 6165 val = MAX(noise[2], val); 6166 /* Insert it into our samples table. */ 6167 calib->noise_samples[calib->cur_noise_sample] = val; 6168 calib->cur_noise_sample = (calib->cur_noise_sample + 1) % 20; 6169 6170 /* Compute maximum noise among last 20 samples. */ 6171 noise_ref = calib->noise_samples[0]; 6172 for (i = 1; i < 20; i++) 6173 noise_ref = MAX(noise_ref, calib->noise_samples[i]); 6174 6175 /* Compute maximum energy among 3 receivers. */ 6176 for (i = 0; i < 3; i++) 6177 energy[i] = le32toh(stats->general.energy[i]); 6178 val = MIN(energy[0], energy[1]); 6179 val = MIN(energy[2], val); 6180 /* Insert it into our samples table. */ 6181 calib->energy_samples[calib->cur_energy_sample] = val; 6182 calib->cur_energy_sample = (calib->cur_energy_sample + 1) % 10; 6183 6184 /* Compute minimum energy among last 10 samples. */ 6185 energy_min = calib->energy_samples[0]; 6186 for (i = 1; i < 10; i++) 6187 energy_min = MAX(energy_min, calib->energy_samples[i]); 6188 energy_min += 6; 6189 6190 /* Compute number of false alarms since last call for CCK. */ 6191 fa = le32toh(stats->cck.bad_plcp) - calib->bad_plcp_cck; 6192 fa += le32toh(stats->cck.fa) - calib->fa_cck; 6193 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */ 6194 6195 if (fa > 50 * rxena) { 6196 /* High false alarm count, decrease sensitivity. */ 6197 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6198 "%s: CCK high false alarm count: %u\n", __func__, fa); 6199 calib->cck_state = IWN_CCK_STATE_HIFA; 6200 calib->low_fa = 0; 6201 6202 if (calib->cck_x4 > 160) { 6203 calib->noise_ref = noise_ref; 6204 if (calib->energy_cck > 2) 6205 dec(calib->energy_cck, 2, energy_min); 6206 } 6207 if (calib->cck_x4 < 160) { 6208 calib->cck_x4 = 161; 6209 needs_update = 1; 6210 } else 6211 inc(calib->cck_x4, 3, limits->max_cck_x4); 6212 6213 inc(calib->cck_mrc_x4, 3, limits->max_cck_mrc_x4); 6214 6215 } else if (fa < 5 * rxena) { 6216 /* Low false alarm count, increase sensitivity. */ 6217 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6218 "%s: CCK low false alarm count: %u\n", __func__, fa); 6219 calib->cck_state = IWN_CCK_STATE_LOFA; 6220 calib->low_fa++; 6221 6222 if (calib->cck_state != IWN_CCK_STATE_INIT && 6223 (((int32_t)calib->noise_ref - (int32_t)noise_ref) > 2 || 6224 calib->low_fa > 100)) { 6225 inc(calib->energy_cck, 2, limits->min_energy_cck); 6226 dec(calib->cck_x4, 3, limits->min_cck_x4); 6227 dec(calib->cck_mrc_x4, 3, limits->min_cck_mrc_x4); 6228 } 6229 } else { 6230 /* Not worth to increase or decrease sensitivity. */ 6231 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6232 "%s: CCK normal false alarm count: %u\n", __func__, fa); 6233 calib->low_fa = 0; 6234 calib->noise_ref = noise_ref; 6235 6236 if (calib->cck_state == IWN_CCK_STATE_HIFA) { 6237 /* Previous interval had many false alarms. */ 6238 dec(calib->energy_cck, 8, energy_min); 6239 } 6240 calib->cck_state = IWN_CCK_STATE_INIT; 6241 } 6242 6243 if (needs_update) 6244 (void)iwn_send_sensitivity(sc); 6245 6246 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6247 6248 #undef dec 6249 #undef inc 6250 } 6251 6252 static int 6253 iwn_send_sensitivity(struct iwn_softc *sc) 6254 { 6255 struct iwn_calib_state *calib = &sc->calib; 6256 struct iwn_enhanced_sensitivity_cmd cmd; 6257 int len; 6258 6259 memset(&cmd, 0, sizeof cmd); 6260 len = sizeof (struct iwn_sensitivity_cmd); 6261 cmd.which = IWN_SENSITIVITY_WORKTBL; 6262 /* OFDM modulation. */ 6263 cmd.corr_ofdm_x1 = htole16(calib->ofdm_x1); 6264 cmd.corr_ofdm_mrc_x1 = htole16(calib->ofdm_mrc_x1); 6265 cmd.corr_ofdm_x4 = htole16(calib->ofdm_x4); 6266 cmd.corr_ofdm_mrc_x4 = htole16(calib->ofdm_mrc_x4); 6267 cmd.energy_ofdm = htole16(sc->limits->energy_ofdm); 6268 cmd.energy_ofdm_th = htole16(62); 6269 /* CCK modulation. */ 6270 cmd.corr_cck_x4 = htole16(calib->cck_x4); 6271 cmd.corr_cck_mrc_x4 = htole16(calib->cck_mrc_x4); 6272 cmd.energy_cck = htole16(calib->energy_cck); 6273 /* Barker modulation: use default values. */ 6274 cmd.corr_barker = htole16(190); 6275 cmd.corr_barker_mrc = htole16(sc->limits->barker_mrc); 6276 6277 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6278 "%s: set sensitivity %d/%d/%d/%d/%d/%d/%d\n", __func__, 6279 calib->ofdm_x1, calib->ofdm_mrc_x1, calib->ofdm_x4, 6280 calib->ofdm_mrc_x4, calib->cck_x4, 6281 calib->cck_mrc_x4, calib->energy_cck); 6282 6283 if (!(sc->sc_flags & IWN_FLAG_ENH_SENS)) 6284 goto send; 6285 /* Enhanced sensitivity settings. */ 6286 len = sizeof (struct iwn_enhanced_sensitivity_cmd); 6287 cmd.ofdm_det_slope_mrc = htole16(668); 6288 cmd.ofdm_det_icept_mrc = htole16(4); 6289 cmd.ofdm_det_slope = htole16(486); 6290 cmd.ofdm_det_icept = htole16(37); 6291 cmd.cck_det_slope_mrc = htole16(853); 6292 cmd.cck_det_icept_mrc = htole16(4); 6293 cmd.cck_det_slope = htole16(476); 6294 cmd.cck_det_icept = htole16(99); 6295 send: 6296 return iwn_cmd(sc, IWN_CMD_SET_SENSITIVITY, &cmd, len, 1); 6297 } 6298 6299 /* 6300 * Look at the increase of PLCP errors over time; if it exceeds 6301 * a programmed threshold then trigger an RF retune. 6302 */ 6303 static void 6304 iwn_check_rx_recovery(struct iwn_softc *sc, struct iwn_stats *rs) 6305 { 6306 int32_t delta_ofdm, delta_ht, delta_cck; 6307 struct iwn_calib_state *calib = &sc->calib; 6308 int delta_ticks, cur_ticks; 6309 int delta_msec; 6310 int thresh; 6311 6312 /* 6313 * Calculate the difference between the current and 6314 * previous statistics. 6315 */ 6316 delta_cck = le32toh(rs->rx.cck.bad_plcp) - calib->bad_plcp_cck; 6317 delta_ofdm = le32toh(rs->rx.ofdm.bad_plcp) - calib->bad_plcp_ofdm; 6318 delta_ht = le32toh(rs->rx.ht.bad_plcp) - calib->bad_plcp_ht; 6319 6320 /* 6321 * Calculate the delta in time between successive statistics 6322 * messages. Yes, it can roll over; so we make sure that 6323 * this doesn't happen. 6324 * 6325 * XXX go figure out what to do about rollover 6326 * XXX go figure out what to do if ticks rolls over to -ve instead! 6327 * XXX go stab signed integer overflow undefined-ness in the face. 6328 */ 6329 cur_ticks = ticks; 6330 delta_ticks = cur_ticks - sc->last_calib_ticks; 6331 6332 /* 6333 * If any are negative, then the firmware likely reset; so just 6334 * bail. We'll pick this up next time. 6335 */ 6336 if (delta_cck < 0 || delta_ofdm < 0 || delta_ht < 0 || delta_ticks < 0) 6337 return; 6338 6339 /* 6340 * delta_ticks is in ticks; we need to convert it up to milliseconds 6341 * so we can do some useful math with it. 6342 */ 6343 delta_msec = ticks_to_msecs(delta_ticks); 6344 6345 /* 6346 * Calculate what our threshold is given the current delta_msec. 6347 */ 6348 thresh = sc->base_params->plcp_err_threshold * delta_msec; 6349 6350 DPRINTF(sc, IWN_DEBUG_STATE, 6351 "%s: time delta: %d; cck=%d, ofdm=%d, ht=%d, total=%d, thresh=%d\n", 6352 __func__, 6353 delta_msec, 6354 delta_cck, 6355 delta_ofdm, 6356 delta_ht, 6357 (delta_msec + delta_cck + delta_ofdm + delta_ht), 6358 thresh); 6359 6360 /* 6361 * If we need a retune, then schedule a single channel scan 6362 * to a channel that isn't the currently active one! 6363 * 6364 * The math from linux iwlwifi: 6365 * 6366 * if ((delta * 100 / msecs) > threshold) 6367 */ 6368 if (thresh > 0 && (delta_cck + delta_ofdm + delta_ht) * 100 > thresh) { 6369 DPRINTF(sc, IWN_DEBUG_ANY, 6370 "%s: PLCP error threshold raw (%d) comparison (%d) " 6371 "over limit (%d); retune!\n", 6372 __func__, 6373 (delta_cck + delta_ofdm + delta_ht), 6374 (delta_cck + delta_ofdm + delta_ht) * 100, 6375 thresh); 6376 } 6377 } 6378 6379 /* 6380 * Set STA mode power saving level (between 0 and 5). 6381 * Level 0 is CAM (Continuously Aware Mode), 5 is for maximum power saving. 6382 */ 6383 static int 6384 iwn_set_pslevel(struct iwn_softc *sc, int dtim, int level, int async) 6385 { 6386 struct iwn_pmgt_cmd cmd; 6387 const struct iwn_pmgt *pmgt; 6388 uint32_t max, skip_dtim; 6389 uint32_t reg; 6390 int i; 6391 6392 DPRINTF(sc, IWN_DEBUG_PWRSAVE, 6393 "%s: dtim=%d, level=%d, async=%d\n", 6394 __func__, 6395 dtim, 6396 level, 6397 async); 6398 6399 /* Select which PS parameters to use. */ 6400 if (dtim <= 2) 6401 pmgt = &iwn_pmgt[0][level]; 6402 else if (dtim <= 10) 6403 pmgt = &iwn_pmgt[1][level]; 6404 else 6405 pmgt = &iwn_pmgt[2][level]; 6406 6407 memset(&cmd, 0, sizeof cmd); 6408 if (level != 0) /* not CAM */ 6409 cmd.flags |= htole16(IWN_PS_ALLOW_SLEEP); 6410 if (level == 5) 6411 cmd.flags |= htole16(IWN_PS_FAST_PD); 6412 /* Retrieve PCIe Active State Power Management (ASPM). */ 6413 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + 0x10, 1); 6414 if (!(reg & 0x1)) /* L0s Entry disabled. */ 6415 cmd.flags |= htole16(IWN_PS_PCI_PMGT); 6416 cmd.rxtimeout = htole32(pmgt->rxtimeout * 1024); 6417 cmd.txtimeout = htole32(pmgt->txtimeout * 1024); 6418 6419 if (dtim == 0) { 6420 dtim = 1; 6421 skip_dtim = 0; 6422 } else 6423 skip_dtim = pmgt->skip_dtim; 6424 if (skip_dtim != 0) { 6425 cmd.flags |= htole16(IWN_PS_SLEEP_OVER_DTIM); 6426 max = pmgt->intval[4]; 6427 if (max == (uint32_t)-1) 6428 max = dtim * (skip_dtim + 1); 6429 else if (max > dtim) 6430 max = (max / dtim) * dtim; 6431 } else 6432 max = dtim; 6433 for (i = 0; i < 5; i++) 6434 cmd.intval[i] = htole32(MIN(max, pmgt->intval[i])); 6435 6436 DPRINTF(sc, IWN_DEBUG_RESET, "setting power saving level to %d\n", 6437 level); 6438 return iwn_cmd(sc, IWN_CMD_SET_POWER_MODE, &cmd, sizeof cmd, async); 6439 } 6440 6441 static int 6442 iwn_send_btcoex(struct iwn_softc *sc) 6443 { 6444 struct iwn_bluetooth cmd; 6445 6446 memset(&cmd, 0, sizeof cmd); 6447 cmd.flags = IWN_BT_COEX_CHAN_ANN | IWN_BT_COEX_BT_PRIO; 6448 cmd.lead_time = IWN_BT_LEAD_TIME_DEF; 6449 cmd.max_kill = IWN_BT_MAX_KILL_DEF; 6450 DPRINTF(sc, IWN_DEBUG_RESET, "%s: configuring bluetooth coexistence\n", 6451 __func__); 6452 return iwn_cmd(sc, IWN_CMD_BT_COEX, &cmd, sizeof(cmd), 0); 6453 } 6454 6455 static int 6456 iwn_send_advanced_btcoex(struct iwn_softc *sc) 6457 { 6458 static const uint32_t btcoex_3wire[12] = { 6459 0xaaaaaaaa, 0xaaaaaaaa, 0xaeaaaaaa, 0xaaaaaaaa, 6460 0xcc00ff28, 0x0000aaaa, 0xcc00aaaa, 0x0000aaaa, 6461 0xc0004000, 0x00004000, 0xf0005000, 0xf0005000, 6462 }; 6463 struct iwn6000_btcoex_config btconfig; 6464 struct iwn2000_btcoex_config btconfig2k; 6465 struct iwn_btcoex_priotable btprio; 6466 struct iwn_btcoex_prot btprot; 6467 int error, i; 6468 uint8_t flags; 6469 6470 memset(&btconfig, 0, sizeof btconfig); 6471 memset(&btconfig2k, 0, sizeof btconfig2k); 6472 6473 flags = IWN_BT_FLAG_COEX6000_MODE_3W << 6474 IWN_BT_FLAG_COEX6000_MODE_SHIFT; // Done as is in linux kernel 3.2 6475 6476 if (sc->base_params->bt_sco_disable) 6477 flags &= ~IWN_BT_FLAG_SYNC_2_BT_DISABLE; 6478 else 6479 flags |= IWN_BT_FLAG_SYNC_2_BT_DISABLE; 6480 6481 flags |= IWN_BT_FLAG_COEX6000_CHAN_INHIBITION; 6482 6483 /* Default flags result is 145 as old value */ 6484 6485 /* 6486 * Flags value has to be review. Values must change if we 6487 * which to disable it 6488 */ 6489 if (sc->base_params->bt_session_2) { 6490 btconfig2k.flags = flags; 6491 btconfig2k.max_kill = 5; 6492 btconfig2k.bt3_t7_timer = 1; 6493 btconfig2k.kill_ack = htole32(0xffff0000); 6494 btconfig2k.kill_cts = htole32(0xffff0000); 6495 btconfig2k.sample_time = 2; 6496 btconfig2k.bt3_t2_timer = 0xc; 6497 6498 for (i = 0; i < 12; i++) 6499 btconfig2k.lookup_table[i] = htole32(btcoex_3wire[i]); 6500 btconfig2k.valid = htole16(0xff); 6501 btconfig2k.prio_boost = htole32(0xf0); 6502 DPRINTF(sc, IWN_DEBUG_RESET, 6503 "%s: configuring advanced bluetooth coexistence" 6504 " session 2, flags : 0x%x\n", 6505 __func__, 6506 flags); 6507 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig2k, 6508 sizeof(btconfig2k), 1); 6509 } else { 6510 btconfig.flags = flags; 6511 btconfig.max_kill = 5; 6512 btconfig.bt3_t7_timer = 1; 6513 btconfig.kill_ack = htole32(0xffff0000); 6514 btconfig.kill_cts = htole32(0xffff0000); 6515 btconfig.sample_time = 2; 6516 btconfig.bt3_t2_timer = 0xc; 6517 6518 for (i = 0; i < 12; i++) 6519 btconfig.lookup_table[i] = htole32(btcoex_3wire[i]); 6520 btconfig.valid = htole16(0xff); 6521 btconfig.prio_boost = 0xf0; 6522 DPRINTF(sc, IWN_DEBUG_RESET, 6523 "%s: configuring advanced bluetooth coexistence," 6524 " flags : 0x%x\n", 6525 __func__, 6526 flags); 6527 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig, 6528 sizeof(btconfig), 1); 6529 } 6530 6531 if (error != 0) 6532 return error; 6533 6534 memset(&btprio, 0, sizeof btprio); 6535 btprio.calib_init1 = 0x6; 6536 btprio.calib_init2 = 0x7; 6537 btprio.calib_periodic_low1 = 0x2; 6538 btprio.calib_periodic_low2 = 0x3; 6539 btprio.calib_periodic_high1 = 0x4; 6540 btprio.calib_periodic_high2 = 0x5; 6541 btprio.dtim = 0x6; 6542 btprio.scan52 = 0x8; 6543 btprio.scan24 = 0xa; 6544 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PRIOTABLE, &btprio, sizeof(btprio), 6545 1); 6546 if (error != 0) 6547 return error; 6548 6549 /* Force BT state machine change. */ 6550 memset(&btprot, 0, sizeof btprot); 6551 btprot.open = 1; 6552 btprot.type = 1; 6553 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1); 6554 if (error != 0) 6555 return error; 6556 btprot.open = 0; 6557 return iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1); 6558 } 6559 6560 static int 6561 iwn5000_runtime_calib(struct iwn_softc *sc) 6562 { 6563 struct iwn5000_calib_config cmd; 6564 6565 memset(&cmd, 0, sizeof cmd); 6566 cmd.ucode.once.enable = 0xffffffff; 6567 cmd.ucode.once.start = IWN5000_CALIB_DC; 6568 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6569 "%s: configuring runtime calibration\n", __func__); 6570 return iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof(cmd), 0); 6571 } 6572 6573 static int 6574 iwn_config(struct iwn_softc *sc) 6575 { 6576 struct iwn_ops *ops = &sc->ops; 6577 struct ifnet *ifp = sc->sc_ifp; 6578 struct ieee80211com *ic = ifp->if_l2com; 6579 uint32_t txmask; 6580 uint16_t rxchain; 6581 int error; 6582 6583 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6584 6585 if ((sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) 6586 && (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)) { 6587 device_printf(sc->sc_dev,"%s: temp_offset and temp_offsetv2 are" 6588 " exclusive each together. Review NIC config file. Conf" 6589 " : 0x%08x Flags : 0x%08x \n", __func__, 6590 sc->base_params->calib_need, 6591 (IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET | 6592 IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)); 6593 return (EINVAL); 6594 } 6595 6596 /* Compute temperature calib if needed. Will be send by send calib */ 6597 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) { 6598 error = iwn5000_temp_offset_calib(sc); 6599 if (error != 0) { 6600 device_printf(sc->sc_dev, 6601 "%s: could not set temperature offset\n", __func__); 6602 return (error); 6603 } 6604 } else if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) { 6605 error = iwn5000_temp_offset_calibv2(sc); 6606 if (error != 0) { 6607 device_printf(sc->sc_dev, 6608 "%s: could not compute temperature offset v2\n", 6609 __func__); 6610 return (error); 6611 } 6612 } 6613 6614 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 6615 /* Configure runtime DC calibration. */ 6616 error = iwn5000_runtime_calib(sc); 6617 if (error != 0) { 6618 device_printf(sc->sc_dev, 6619 "%s: could not configure runtime calibration\n", 6620 __func__); 6621 return error; 6622 } 6623 } 6624 6625 /* Configure valid TX chains for >=5000 Series. */ 6626 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 6627 IWN_UCODE_API(sc->ucode_rev) > 1) { 6628 txmask = htole32(sc->txchainmask); 6629 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT, 6630 "%s: configuring valid TX chains 0x%x\n", __func__, txmask); 6631 error = iwn_cmd(sc, IWN5000_CMD_TX_ANT_CONFIG, &txmask, 6632 sizeof txmask, 0); 6633 if (error != 0) { 6634 device_printf(sc->sc_dev, 6635 "%s: could not configure valid TX chains, " 6636 "error %d\n", __func__, error); 6637 return error; 6638 } 6639 } 6640 6641 /* Configure bluetooth coexistence. */ 6642 error = 0; 6643 6644 /* Configure bluetooth coexistence if needed. */ 6645 if (sc->base_params->bt_mode == IWN_BT_ADVANCED) 6646 error = iwn_send_advanced_btcoex(sc); 6647 if (sc->base_params->bt_mode == IWN_BT_SIMPLE) 6648 error = iwn_send_btcoex(sc); 6649 6650 if (error != 0) { 6651 device_printf(sc->sc_dev, 6652 "%s: could not configure bluetooth coexistence, error %d\n", 6653 __func__, error); 6654 return error; 6655 } 6656 6657 /* Set mode, channel, RX filter and enable RX. */ 6658 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 6659 memset(sc->rxon, 0, sizeof (struct iwn_rxon)); 6660 IEEE80211_ADDR_COPY(sc->rxon->myaddr, IF_LLADDR(ifp)); 6661 IEEE80211_ADDR_COPY(sc->rxon->wlap, IF_LLADDR(ifp)); 6662 sc->rxon->chan = ieee80211_chan2ieee(ic, ic->ic_curchan); 6663 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 6664 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 6665 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 6666 switch (ic->ic_opmode) { 6667 case IEEE80211_M_STA: 6668 sc->rxon->mode = IWN_MODE_STA; 6669 sc->rxon->filter = htole32(IWN_FILTER_MULTICAST); 6670 break; 6671 case IEEE80211_M_MONITOR: 6672 sc->rxon->mode = IWN_MODE_MONITOR; 6673 sc->rxon->filter = htole32(IWN_FILTER_MULTICAST | 6674 IWN_FILTER_CTL | IWN_FILTER_PROMISC); 6675 break; 6676 default: 6677 /* Should not get there. */ 6678 break; 6679 } 6680 sc->rxon->cck_mask = 0x0f; /* not yet negotiated */ 6681 sc->rxon->ofdm_mask = 0xff; /* not yet negotiated */ 6682 sc->rxon->ht_single_mask = 0xff; 6683 sc->rxon->ht_dual_mask = 0xff; 6684 sc->rxon->ht_triple_mask = 0xff; 6685 /* 6686 * In active association mode, ensure that 6687 * all the receive chains are enabled. 6688 * 6689 * Since we're not yet doing SMPS, don't allow the 6690 * number of idle RX chains to be less than the active 6691 * number. 6692 */ 6693 rxchain = 6694 IWN_RXCHAIN_VALID(sc->rxchainmask) | 6695 IWN_RXCHAIN_MIMO_COUNT(sc->nrxchains) | 6696 IWN_RXCHAIN_IDLE_COUNT(sc->nrxchains); 6697 sc->rxon->rxchain = htole16(rxchain); 6698 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT, 6699 "%s: rxchainmask=0x%x, nrxchains=%d\n", 6700 __func__, 6701 sc->rxchainmask, 6702 sc->nrxchains); 6703 DPRINTF(sc, IWN_DEBUG_RESET, "%s: setting configuration\n", __func__); 6704 if (sc->sc_is_scanning) 6705 device_printf(sc->sc_dev, 6706 "%s: is_scanning set, before RXON\n", 6707 __func__); 6708 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 0); 6709 if (error != 0) { 6710 device_printf(sc->sc_dev, "%s: RXON command failed\n", 6711 __func__); 6712 return error; 6713 } 6714 6715 if ((error = iwn_add_broadcast_node(sc, 0)) != 0) { 6716 device_printf(sc->sc_dev, "%s: could not add broadcast node\n", 6717 __func__); 6718 return error; 6719 } 6720 6721 /* Configuration has changed, set TX power accordingly. */ 6722 if ((error = ops->set_txpower(sc, ic->ic_curchan, 0)) != 0) { 6723 device_printf(sc->sc_dev, "%s: could not set TX power\n", 6724 __func__); 6725 return error; 6726 } 6727 6728 if ((error = iwn_set_critical_temp(sc)) != 0) { 6729 device_printf(sc->sc_dev, 6730 "%s: could not set critical temperature\n", __func__); 6731 return error; 6732 } 6733 6734 /* Set power saving level to CAM during initialization. */ 6735 if ((error = iwn_set_pslevel(sc, 0, 0, 0)) != 0) { 6736 device_printf(sc->sc_dev, 6737 "%s: could not set power saving level\n", __func__); 6738 return error; 6739 } 6740 6741 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6742 6743 return 0; 6744 } 6745 6746 static uint16_t 6747 iwn_get_active_dwell_time(struct iwn_softc *sc, 6748 struct ieee80211_channel *c, uint8_t n_probes) 6749 { 6750 /* No channel? Default to 2GHz settings */ 6751 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { 6752 return (IWN_ACTIVE_DWELL_TIME_2GHZ + 6753 IWN_ACTIVE_DWELL_FACTOR_2GHZ * (n_probes + 1)); 6754 } 6755 6756 /* 5GHz dwell time */ 6757 return (IWN_ACTIVE_DWELL_TIME_5GHZ + 6758 IWN_ACTIVE_DWELL_FACTOR_5GHZ * (n_probes + 1)); 6759 } 6760 6761 /* 6762 * Limit the total dwell time to 85% of the beacon interval. 6763 * 6764 * Returns the dwell time in milliseconds. 6765 */ 6766 static uint16_t 6767 iwn_limit_dwell(struct iwn_softc *sc, uint16_t dwell_time) 6768 { 6769 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 6770 struct ieee80211vap *vap = NULL; 6771 int bintval = 0; 6772 6773 /* bintval is in TU (1.024mS) */ 6774 if (! TAILQ_EMPTY(&ic->ic_vaps)) { 6775 vap = TAILQ_FIRST(&ic->ic_vaps); 6776 bintval = vap->iv_bss->ni_intval; 6777 } 6778 6779 /* 6780 * If it's non-zero, we should calculate the minimum of 6781 * it and the DWELL_BASE. 6782 * 6783 * XXX Yes, the math should take into account that bintval 6784 * is 1.024mS, not 1mS.. 6785 */ 6786 if (bintval > 0) { 6787 DPRINTF(sc, IWN_DEBUG_SCAN, 6788 "%s: bintval=%d\n", 6789 __func__, 6790 bintval); 6791 return (MIN(IWN_PASSIVE_DWELL_BASE, ((bintval * 85) / 100))); 6792 } 6793 6794 /* No association context? Default */ 6795 return (IWN_PASSIVE_DWELL_BASE); 6796 } 6797 6798 static uint16_t 6799 iwn_get_passive_dwell_time(struct iwn_softc *sc, struct ieee80211_channel *c) 6800 { 6801 uint16_t passive; 6802 6803 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { 6804 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_2GHZ; 6805 } else { 6806 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_5GHZ; 6807 } 6808 6809 /* Clamp to the beacon interval if we're associated */ 6810 return (iwn_limit_dwell(sc, passive)); 6811 } 6812 6813 static int 6814 iwn_scan(struct iwn_softc *sc, struct ieee80211vap *vap, 6815 struct ieee80211_scan_state *ss, struct ieee80211_channel *c) 6816 { 6817 struct ifnet *ifp = sc->sc_ifp; 6818 struct ieee80211com *ic = ifp->if_l2com; 6819 struct ieee80211_node *ni = vap->iv_bss; 6820 struct iwn_scan_hdr *hdr; 6821 struct iwn_cmd_data *tx; 6822 struct iwn_scan_essid *essid; 6823 struct iwn_scan_chan *chan; 6824 struct ieee80211_frame *wh; 6825 struct ieee80211_rateset *rs; 6826 uint8_t *buf, *frm; 6827 uint16_t rxchain; 6828 uint8_t txant; 6829 int buflen, error; 6830 int is_active; 6831 uint16_t dwell_active, dwell_passive; 6832 uint32_t extra, scan_service_time; 6833 6834 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6835 6836 /* 6837 * We are absolutely not allowed to send a scan command when another 6838 * scan command is pending. 6839 */ 6840 if (sc->sc_is_scanning) { 6841 device_printf(sc->sc_dev, "%s: called whilst scanning!\n", 6842 __func__); 6843 return (EAGAIN); 6844 } 6845 6846 /* Assign the scan channel */ 6847 c = ic->ic_curchan; 6848 6849 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 6850 buf = kmalloc(IWN_SCAN_MAXSZ, M_DEVBUF, M_INTWAIT | M_ZERO); 6851 if (buf == NULL) { 6852 device_printf(sc->sc_dev, 6853 "%s: could not allocate buffer for scan command\n", 6854 __func__); 6855 return ENOMEM; 6856 } 6857 hdr = (struct iwn_scan_hdr *)buf; 6858 /* 6859 * Move to the next channel if no frames are received within 10ms 6860 * after sending the probe request. 6861 */ 6862 hdr->quiet_time = htole16(10); /* timeout in milliseconds */ 6863 hdr->quiet_threshold = htole16(1); /* min # of packets */ 6864 /* 6865 * Max needs to be greater than active and passive and quiet! 6866 * It's also in microseconds! 6867 */ 6868 hdr->max_svc = htole32(250 * 1024); 6869 6870 /* 6871 * Reset scan: interval=100 6872 * Normal scan: interval=becaon interval 6873 * suspend_time: 100 (TU) 6874 * 6875 */ 6876 extra = (100 /* suspend_time */ / 100 /* beacon interval */) << 22; 6877 //scan_service_time = extra | ((100 /* susp */ % 100 /* int */) * 1024); 6878 scan_service_time = (4 << 22) | (100 * 1024); /* Hardcode for now! */ 6879 hdr->pause_svc = htole32(scan_service_time); 6880 6881 /* Select antennas for scanning. */ 6882 rxchain = 6883 IWN_RXCHAIN_VALID(sc->rxchainmask) | 6884 IWN_RXCHAIN_FORCE_MIMO_SEL(sc->rxchainmask) | 6885 IWN_RXCHAIN_DRIVER_FORCE; 6886 if (IEEE80211_IS_CHAN_A(c) && 6887 sc->hw_type == IWN_HW_REV_TYPE_4965) { 6888 /* Ant A must be avoided in 5GHz because of an HW bug. */ 6889 rxchain |= IWN_RXCHAIN_FORCE_SEL(IWN_ANT_B); 6890 } else /* Use all available RX antennas. */ 6891 rxchain |= IWN_RXCHAIN_FORCE_SEL(sc->rxchainmask); 6892 hdr->rxchain = htole16(rxchain); 6893 hdr->filter = htole32(IWN_FILTER_MULTICAST | IWN_FILTER_BEACON); 6894 6895 tx = (struct iwn_cmd_data *)(hdr + 1); 6896 tx->flags = htole32(IWN_TX_AUTO_SEQ); 6897 tx->id = sc->broadcast_id; 6898 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 6899 6900 if (IEEE80211_IS_CHAN_5GHZ(c)) { 6901 /* Send probe requests at 6Mbps. */ 6902 tx->rate = htole32(0xd); 6903 rs = &ic->ic_sup_rates[IEEE80211_MODE_11A]; 6904 } else { 6905 hdr->flags = htole32(IWN_RXON_24GHZ | IWN_RXON_AUTO); 6906 if (sc->hw_type == IWN_HW_REV_TYPE_4965 && 6907 sc->rxon->associd && sc->rxon->chan > 14) 6908 tx->rate = htole32(0xd); 6909 else { 6910 /* Send probe requests at 1Mbps. */ 6911 tx->rate = htole32(10 | IWN_RFLAG_CCK); 6912 } 6913 rs = &ic->ic_sup_rates[IEEE80211_MODE_11G]; 6914 } 6915 /* Use the first valid TX antenna. */ 6916 txant = IWN_LSB(sc->txchainmask); 6917 tx->rate |= htole32(IWN_RFLAG_ANT(txant)); 6918 6919 /* 6920 * Only do active scanning if we're announcing a probe request 6921 * for a given SSID (or more, if we ever add it to the driver.) 6922 */ 6923 is_active = 0; 6924 6925 /* 6926 * If we're scanning for a specific SSID, add it to the command. 6927 * 6928 * XXX maybe look at adding support for scanning multiple SSIDs? 6929 */ 6930 essid = (struct iwn_scan_essid *)(tx + 1); 6931 if (ss != NULL) { 6932 if (ss->ss_ssid[0].len != 0) { 6933 essid[0].id = IEEE80211_ELEMID_SSID; 6934 essid[0].len = ss->ss_ssid[0].len; 6935 memcpy(essid[0].data, ss->ss_ssid[0].ssid, ss->ss_ssid[0].len); 6936 } 6937 6938 DPRINTF(sc, IWN_DEBUG_SCAN, "%s: ssid_len=%d, ssid=%*s\n", 6939 __func__, 6940 ss->ss_ssid[0].len, 6941 ss->ss_ssid[0].len, 6942 ss->ss_ssid[0].ssid); 6943 6944 if (ss->ss_nssid > 0) 6945 is_active = 1; 6946 } 6947 6948 /* 6949 * Build a probe request frame. Most of the following code is a 6950 * copy & paste of what is done in net80211. 6951 */ 6952 wh = (struct ieee80211_frame *)(essid + 20); 6953 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 6954 IEEE80211_FC0_SUBTYPE_PROBE_REQ; 6955 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 6956 IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); 6957 IEEE80211_ADDR_COPY(wh->i_addr2, IF_LLADDR(ifp)); 6958 IEEE80211_ADDR_COPY(wh->i_addr3, ifp->if_broadcastaddr); 6959 *(uint16_t *)&wh->i_dur[0] = 0; /* filled by HW */ 6960 *(uint16_t *)&wh->i_seq[0] = 0; /* filled by HW */ 6961 6962 frm = (uint8_t *)(wh + 1); 6963 frm = ieee80211_add_ssid(frm, NULL, 0); 6964 frm = ieee80211_add_rates(frm, rs); 6965 if (rs->rs_nrates > IEEE80211_RATE_SIZE) 6966 frm = ieee80211_add_xrates(frm, rs); 6967 if (ic->ic_htcaps & IEEE80211_HTC_HT) 6968 frm = ieee80211_add_htcap(frm, ni); 6969 6970 /* Set length of probe request. */ 6971 tx->len = htole16(frm - (uint8_t *)wh); 6972 6973 /* 6974 * If active scanning is requested but a certain channel is 6975 * marked passive, we can do active scanning if we detect 6976 * transmissions. 6977 * 6978 * There is an issue with some firmware versions that triggers 6979 * a sysassert on a "good CRC threshold" of zero (== disabled), 6980 * on a radar channel even though this means that we should NOT 6981 * send probes. 6982 * 6983 * The "good CRC threshold" is the number of frames that we 6984 * need to receive during our dwell time on a channel before 6985 * sending out probes -- setting this to a huge value will 6986 * mean we never reach it, but at the same time work around 6987 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER 6988 * here instead of IWL_GOOD_CRC_TH_DISABLED. 6989 * 6990 * This was fixed in later versions along with some other 6991 * scan changes, and the threshold behaves as a flag in those 6992 * versions. 6993 */ 6994 6995 /* 6996 * If we're doing active scanning, set the crc_threshold 6997 * to a suitable value. This is different to active veruss 6998 * passive scanning depending upon the channel flags; the 6999 * firmware will obey that particular check for us. 7000 */ 7001 if (sc->tlv_feature_flags & IWN_UCODE_TLV_FLAGS_NEWSCAN) 7002 hdr->crc_threshold = is_active ? 7003 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_DISABLED; 7004 else 7005 hdr->crc_threshold = is_active ? 7006 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_NEVER; 7007 7008 chan = (struct iwn_scan_chan *)frm; 7009 chan->chan = htole16(ieee80211_chan2ieee(ic, c)); 7010 chan->flags = 0; 7011 if (ss->ss_nssid > 0) 7012 chan->flags |= htole32(IWN_CHAN_NPBREQS(1)); 7013 chan->dsp_gain = 0x6e; 7014 7015 /* 7016 * Set the passive/active flag depending upon the channel mode. 7017 * XXX TODO: take the is_active flag into account as well? 7018 */ 7019 if (c->ic_flags & IEEE80211_CHAN_PASSIVE) 7020 chan->flags |= htole32(IWN_CHAN_PASSIVE); 7021 else 7022 chan->flags |= htole32(IWN_CHAN_ACTIVE); 7023 7024 /* 7025 * Calculate the active/passive dwell times. 7026 */ 7027 7028 dwell_active = iwn_get_active_dwell_time(sc, c, ss->ss_nssid); 7029 dwell_passive = iwn_get_passive_dwell_time(sc, c); 7030 7031 /* Make sure they're valid */ 7032 if (dwell_passive <= dwell_active) 7033 dwell_passive = dwell_active + 1; 7034 7035 chan->active = htole16(dwell_active); 7036 chan->passive = htole16(dwell_passive); 7037 7038 if (IEEE80211_IS_CHAN_5GHZ(c) && 7039 !(c->ic_flags & IEEE80211_CHAN_PASSIVE)) { 7040 chan->rf_gain = 0x3b; 7041 } else if (IEEE80211_IS_CHAN_5GHZ(c)) { 7042 chan->rf_gain = 0x3b; 7043 } else if (!(c->ic_flags & IEEE80211_CHAN_PASSIVE)) { 7044 chan->rf_gain = 0x28; 7045 } else { 7046 chan->rf_gain = 0x28; 7047 } 7048 7049 DPRINTF(sc, IWN_DEBUG_STATE, 7050 "%s: chan %u flags 0x%x rf_gain 0x%x " 7051 "dsp_gain 0x%x active %d passive %d scan_svc_time %d crc 0x%x " 7052 "isactive=%d numssid=%d\n", __func__, 7053 chan->chan, chan->flags, chan->rf_gain, chan->dsp_gain, 7054 dwell_active, dwell_passive, scan_service_time, 7055 hdr->crc_threshold, is_active, ss->ss_nssid); 7056 7057 hdr->nchan++; 7058 chan++; 7059 buflen = (uint8_t *)chan - buf; 7060 hdr->len = htole16(buflen); 7061 7062 if (sc->sc_is_scanning) { 7063 device_printf(sc->sc_dev, 7064 "%s: called with is_scanning set!\n", 7065 __func__); 7066 } 7067 sc->sc_is_scanning = 1; 7068 7069 DPRINTF(sc, IWN_DEBUG_STATE, "sending scan command nchan=%d\n", 7070 hdr->nchan); 7071 error = iwn_cmd(sc, IWN_CMD_SCAN, buf, buflen, 1); 7072 kfree(buf, M_DEVBUF); 7073 7074 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7075 7076 return error; 7077 } 7078 7079 static int 7080 iwn_auth(struct iwn_softc *sc, struct ieee80211vap *vap) 7081 { 7082 struct iwn_ops *ops = &sc->ops; 7083 struct ifnet *ifp = sc->sc_ifp; 7084 struct ieee80211com *ic = ifp->if_l2com; 7085 struct ieee80211_node *ni = vap->iv_bss; 7086 int error; 7087 7088 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7089 7090 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 7091 /* Update adapter configuration. */ 7092 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid); 7093 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan); 7094 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 7095 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 7096 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 7097 if (ic->ic_flags & IEEE80211_F_SHSLOT) 7098 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT); 7099 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 7100 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE); 7101 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) { 7102 sc->rxon->cck_mask = 0; 7103 sc->rxon->ofdm_mask = 0x15; 7104 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) { 7105 sc->rxon->cck_mask = 0x03; 7106 sc->rxon->ofdm_mask = 0; 7107 } else { 7108 /* Assume 802.11b/g. */ 7109 sc->rxon->cck_mask = 0x03; 7110 sc->rxon->ofdm_mask = 0x15; 7111 } 7112 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x cck %x ofdm %x\n", 7113 sc->rxon->chan, sc->rxon->flags, sc->rxon->cck_mask, 7114 sc->rxon->ofdm_mask); 7115 if (sc->sc_is_scanning) 7116 device_printf(sc->sc_dev, 7117 "%s: is_scanning set, before RXON\n", 7118 __func__); 7119 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 7120 if (error != 0) { 7121 device_printf(sc->sc_dev, "%s: RXON command failed, error %d\n", 7122 __func__, error); 7123 return error; 7124 } 7125 7126 /* Configuration has changed, set TX power accordingly. */ 7127 if ((error = ops->set_txpower(sc, ni->ni_chan, 1)) != 0) { 7128 device_printf(sc->sc_dev, 7129 "%s: could not set TX power, error %d\n", __func__, error); 7130 return error; 7131 } 7132 /* 7133 * Reconfiguring RXON clears the firmware nodes table so we must 7134 * add the broadcast node again. 7135 */ 7136 if ((error = iwn_add_broadcast_node(sc, 1)) != 0) { 7137 device_printf(sc->sc_dev, 7138 "%s: could not add broadcast node, error %d\n", __func__, 7139 error); 7140 return error; 7141 } 7142 7143 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7144 7145 return 0; 7146 } 7147 7148 static int 7149 iwn_run(struct iwn_softc *sc, struct ieee80211vap *vap) 7150 { 7151 struct iwn_ops *ops = &sc->ops; 7152 struct ifnet *ifp = sc->sc_ifp; 7153 struct ieee80211com *ic = ifp->if_l2com; 7154 struct ieee80211_node *ni = vap->iv_bss; 7155 struct iwn_node_info node; 7156 uint32_t htflags = 0; 7157 int error; 7158 7159 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7160 7161 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 7162 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 7163 /* Link LED blinks while monitoring. */ 7164 iwn_set_led(sc, IWN_LED_LINK, 5, 5); 7165 return 0; 7166 } 7167 if ((error = iwn_set_timing(sc, ni)) != 0) { 7168 device_printf(sc->sc_dev, 7169 "%s: could not set timing, error %d\n", __func__, error); 7170 return error; 7171 } 7172 7173 /* Update adapter configuration. */ 7174 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid); 7175 sc->rxon->associd = htole16(IEEE80211_AID(ni->ni_associd)); 7176 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan); 7177 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 7178 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 7179 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 7180 if (ic->ic_flags & IEEE80211_F_SHSLOT) 7181 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT); 7182 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 7183 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE); 7184 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) { 7185 sc->rxon->cck_mask = 0; 7186 sc->rxon->ofdm_mask = 0x15; 7187 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) { 7188 sc->rxon->cck_mask = 0x03; 7189 sc->rxon->ofdm_mask = 0; 7190 } else { 7191 /* Assume 802.11b/g. */ 7192 sc->rxon->cck_mask = 0x0f; 7193 sc->rxon->ofdm_mask = 0x15; 7194 } 7195 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 7196 htflags |= IWN_RXON_HT_PROTMODE(ic->ic_curhtprotmode); 7197 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { 7198 switch (ic->ic_curhtprotmode) { 7199 case IEEE80211_HTINFO_OPMODE_HT20PR: 7200 htflags |= IWN_RXON_HT_MODEPURE40; 7201 break; 7202 default: 7203 htflags |= IWN_RXON_HT_MODEMIXED; 7204 break; 7205 } 7206 } 7207 if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan)) 7208 htflags |= IWN_RXON_HT_HT40MINUS; 7209 } 7210 sc->rxon->flags |= htole32(htflags); 7211 sc->rxon->filter |= htole32(IWN_FILTER_BSS); 7212 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x\n", 7213 sc->rxon->chan, sc->rxon->flags); 7214 if (sc->sc_is_scanning) 7215 device_printf(sc->sc_dev, 7216 "%s: is_scanning set, before RXON\n", 7217 __func__); 7218 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 7219 if (error != 0) { 7220 device_printf(sc->sc_dev, 7221 "%s: could not update configuration, error %d\n", __func__, 7222 error); 7223 return error; 7224 } 7225 7226 /* Configuration has changed, set TX power accordingly. */ 7227 if ((error = ops->set_txpower(sc, ni->ni_chan, 1)) != 0) { 7228 device_printf(sc->sc_dev, 7229 "%s: could not set TX power, error %d\n", __func__, error); 7230 return error; 7231 } 7232 7233 /* Fake a join to initialize the TX rate. */ 7234 ((struct iwn_node *)ni)->id = IWN_ID_BSS; 7235 iwn_newassoc(ni, 1); 7236 7237 /* Add BSS node. */ 7238 memset(&node, 0, sizeof node); 7239 IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr); 7240 node.id = IWN_ID_BSS; 7241 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 7242 switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) { 7243 case IEEE80211_HTCAP_SMPS_ENA: 7244 node.htflags |= htole32(IWN_SMPS_MIMO_DIS); 7245 break; 7246 case IEEE80211_HTCAP_SMPS_DYNAMIC: 7247 node.htflags |= htole32(IWN_SMPS_MIMO_PROT); 7248 break; 7249 } 7250 node.htflags |= htole32(IWN_AMDPU_SIZE_FACTOR(3) | 7251 IWN_AMDPU_DENSITY(5)); /* 4us */ 7252 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) 7253 node.htflags |= htole32(IWN_NODE_HT40); 7254 } 7255 DPRINTF(sc, IWN_DEBUG_STATE, "%s: adding BSS node\n", __func__); 7256 error = ops->add_node(sc, &node, 1); 7257 if (error != 0) { 7258 device_printf(sc->sc_dev, 7259 "%s: could not add BSS node, error %d\n", __func__, error); 7260 return error; 7261 } 7262 DPRINTF(sc, IWN_DEBUG_STATE, "%s: setting link quality for node %d\n", 7263 __func__, node.id); 7264 if ((error = iwn_set_link_quality(sc, ni)) != 0) { 7265 device_printf(sc->sc_dev, 7266 "%s: could not setup link quality for node %d, error %d\n", 7267 __func__, node.id, error); 7268 return error; 7269 } 7270 7271 if ((error = iwn_init_sensitivity(sc)) != 0) { 7272 device_printf(sc->sc_dev, 7273 "%s: could not set sensitivity, error %d\n", __func__, 7274 error); 7275 return error; 7276 } 7277 /* Start periodic calibration timer. */ 7278 sc->calib.state = IWN_CALIB_STATE_ASSOC; 7279 sc->calib_cnt = 0; 7280 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout, 7281 sc); 7282 7283 /* Link LED always on while associated. */ 7284 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 7285 7286 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7287 7288 return 0; 7289 } 7290 7291 /* 7292 * This function is called by upper layer when an ADDBA request is received 7293 * from another STA and before the ADDBA response is sent. 7294 */ 7295 static int 7296 iwn_ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, 7297 int baparamset, int batimeout, int baseqctl) 7298 { 7299 #define MS(_v, _f) (((_v) & _f) >> _f##_S) 7300 struct iwn_softc *sc = ni->ni_ic->ic_ifp->if_softc; 7301 struct iwn_ops *ops = &sc->ops; 7302 struct iwn_node *wn = (void *)ni; 7303 struct iwn_node_info node; 7304 uint16_t ssn; 7305 uint8_t tid; 7306 int error; 7307 7308 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7309 7310 tid = MS(le16toh(baparamset), IEEE80211_BAPS_TID); 7311 ssn = MS(le16toh(baseqctl), IEEE80211_BASEQ_START); 7312 7313 memset(&node, 0, sizeof node); 7314 node.id = wn->id; 7315 node.control = IWN_NODE_UPDATE; 7316 node.flags = IWN_FLAG_SET_ADDBA; 7317 node.addba_tid = tid; 7318 node.addba_ssn = htole16(ssn); 7319 DPRINTF(sc, IWN_DEBUG_RECV, "ADDBA RA=%d TID=%d SSN=%d\n", 7320 wn->id, tid, ssn); 7321 error = ops->add_node(sc, &node, 1); 7322 if (error != 0) 7323 return error; 7324 return sc->sc_ampdu_rx_start(ni, rap, baparamset, batimeout, baseqctl); 7325 #undef MS 7326 } 7327 7328 /* 7329 * This function is called by upper layer on teardown of an HT-immediate 7330 * Block Ack agreement (eg. uppon receipt of a DELBA frame). 7331 */ 7332 static void 7333 iwn_ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) 7334 { 7335 struct ieee80211com *ic = ni->ni_ic; 7336 struct iwn_softc *sc = ic->ic_ifp->if_softc; 7337 struct iwn_ops *ops = &sc->ops; 7338 struct iwn_node *wn = (void *)ni; 7339 struct iwn_node_info node; 7340 uint8_t tid; 7341 7342 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7343 7344 /* XXX: tid as an argument */ 7345 for (tid = 0; tid < WME_NUM_TID; tid++) { 7346 if (&ni->ni_rx_ampdu[tid] == rap) 7347 break; 7348 } 7349 7350 memset(&node, 0, sizeof node); 7351 node.id = wn->id; 7352 node.control = IWN_NODE_UPDATE; 7353 node.flags = IWN_FLAG_SET_DELBA; 7354 node.delba_tid = tid; 7355 DPRINTF(sc, IWN_DEBUG_RECV, "DELBA RA=%d TID=%d\n", wn->id, tid); 7356 (void)ops->add_node(sc, &node, 1); 7357 sc->sc_ampdu_rx_stop(ni, rap); 7358 } 7359 7360 static int 7361 iwn_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, 7362 int dialogtoken, int baparamset, int batimeout) 7363 { 7364 struct iwn_softc *sc = ni->ni_ic->ic_ifp->if_softc; 7365 int qid; 7366 7367 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7368 7369 for (qid = sc->firstaggqueue; qid < sc->ntxqs; qid++) { 7370 if (sc->qid2tap[qid] == NULL) 7371 break; 7372 } 7373 if (qid == sc->ntxqs) { 7374 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: not free aggregation queue\n", 7375 __func__); 7376 return 0; 7377 } 7378 tap->txa_private = kmalloc(sizeof(int), M_DEVBUF, M_INTWAIT); 7379 if (tap->txa_private == NULL) { 7380 device_printf(sc->sc_dev, 7381 "%s: failed to alloc TX aggregation structure\n", __func__); 7382 return 0; 7383 } 7384 sc->qid2tap[qid] = tap; 7385 *(int *)tap->txa_private = qid; 7386 return sc->sc_addba_request(ni, tap, dialogtoken, baparamset, 7387 batimeout); 7388 } 7389 7390 static int 7391 iwn_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, 7392 int code, int baparamset, int batimeout) 7393 { 7394 struct iwn_softc *sc = ni->ni_ic->ic_ifp->if_softc; 7395 int qid = *(int *)tap->txa_private; 7396 uint8_t tid = tap->txa_tid; 7397 int ret; 7398 7399 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7400 7401 if (code == IEEE80211_STATUS_SUCCESS) { 7402 ni->ni_txseqs[tid] = tap->txa_start & 0xfff; 7403 ret = iwn_ampdu_tx_start(ni->ni_ic, ni, tid); 7404 if (ret != 1) 7405 return ret; 7406 } else { 7407 sc->qid2tap[qid] = NULL; 7408 kfree(tap->txa_private, M_DEVBUF); 7409 tap->txa_private = NULL; 7410 } 7411 return sc->sc_addba_response(ni, tap, code, baparamset, batimeout); 7412 } 7413 7414 /* 7415 * This function is called by upper layer when an ADDBA response is received 7416 * from another STA. 7417 */ 7418 static int 7419 iwn_ampdu_tx_start(struct ieee80211com *ic, struct ieee80211_node *ni, 7420 uint8_t tid) 7421 { 7422 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid]; 7423 struct iwn_softc *sc = ni->ni_ic->ic_ifp->if_softc; 7424 struct iwn_ops *ops = &sc->ops; 7425 struct iwn_node *wn = (void *)ni; 7426 struct iwn_node_info node; 7427 int error, qid; 7428 7429 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7430 7431 /* Enable TX for the specified RA/TID. */ 7432 wn->disable_tid &= ~(1 << tid); 7433 memset(&node, 0, sizeof node); 7434 node.id = wn->id; 7435 node.control = IWN_NODE_UPDATE; 7436 node.flags = IWN_FLAG_SET_DISABLE_TID; 7437 node.disable_tid = htole16(wn->disable_tid); 7438 error = ops->add_node(sc, &node, 1); 7439 if (error != 0) 7440 return 0; 7441 7442 if ((error = iwn_nic_lock(sc)) != 0) 7443 return 0; 7444 qid = *(int *)tap->txa_private; 7445 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: ra=%d tid=%d ssn=%d qid=%d\n", 7446 __func__, wn->id, tid, tap->txa_start, qid); 7447 ops->ampdu_tx_start(sc, ni, qid, tid, tap->txa_start & 0xfff); 7448 iwn_nic_unlock(sc); 7449 7450 iwn_set_link_quality(sc, ni); 7451 return 1; 7452 } 7453 7454 static void 7455 iwn_ampdu_tx_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) 7456 { 7457 struct iwn_softc *sc = ni->ni_ic->ic_ifp->if_softc; 7458 struct iwn_ops *ops = &sc->ops; 7459 uint8_t tid = tap->txa_tid; 7460 int qid; 7461 7462 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7463 7464 sc->sc_addba_stop(ni, tap); 7465 7466 if (tap->txa_private == NULL) 7467 return; 7468 7469 qid = *(int *)tap->txa_private; 7470 if (sc->txq[qid].queued != 0) 7471 return; 7472 if (iwn_nic_lock(sc) != 0) 7473 return; 7474 ops->ampdu_tx_stop(sc, qid, tid, tap->txa_start & 0xfff); 7475 iwn_nic_unlock(sc); 7476 sc->qid2tap[qid] = NULL; 7477 kfree(tap->txa_private, M_DEVBUF); 7478 tap->txa_private = NULL; 7479 } 7480 7481 static void 7482 iwn4965_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 7483 int qid, uint8_t tid, uint16_t ssn) 7484 { 7485 struct iwn_node *wn = (void *)ni; 7486 7487 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7488 7489 /* Stop TX scheduler while we're changing its configuration. */ 7490 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7491 IWN4965_TXQ_STATUS_CHGACT); 7492 7493 /* Assign RA/TID translation to the queue. */ 7494 iwn_mem_write_2(sc, sc->sched_base + IWN4965_SCHED_TRANS_TBL(qid), 7495 wn->id << 4 | tid); 7496 7497 /* Enable chain-building mode for the queue. */ 7498 iwn_prph_setbits(sc, IWN4965_SCHED_QCHAIN_SEL, 1 << qid); 7499 7500 /* Set starting sequence number from the ADDBA request. */ 7501 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff); 7502 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7503 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 7504 7505 /* Set scheduler window size. */ 7506 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid), 7507 IWN_SCHED_WINSZ); 7508 /* Set scheduler frame limit. */ 7509 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 7510 IWN_SCHED_LIMIT << 16); 7511 7512 /* Enable interrupts for the queue. */ 7513 iwn_prph_setbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 7514 7515 /* Mark the queue as active. */ 7516 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7517 IWN4965_TXQ_STATUS_ACTIVE | IWN4965_TXQ_STATUS_AGGR_ENA | 7518 iwn_tid2fifo[tid] << 1); 7519 } 7520 7521 static void 7522 iwn4965_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn) 7523 { 7524 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7525 7526 /* Stop TX scheduler while we're changing its configuration. */ 7527 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7528 IWN4965_TXQ_STATUS_CHGACT); 7529 7530 /* Set starting sequence number from the ADDBA request. */ 7531 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7532 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 7533 7534 /* Disable interrupts for the queue. */ 7535 iwn_prph_clrbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 7536 7537 /* Mark the queue as inactive. */ 7538 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7539 IWN4965_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid] << 1); 7540 } 7541 7542 static void 7543 iwn5000_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 7544 int qid, uint8_t tid, uint16_t ssn) 7545 { 7546 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7547 7548 struct iwn_node *wn = (void *)ni; 7549 7550 /* Stop TX scheduler while we're changing its configuration. */ 7551 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7552 IWN5000_TXQ_STATUS_CHGACT); 7553 7554 /* Assign RA/TID translation to the queue. */ 7555 iwn_mem_write_2(sc, sc->sched_base + IWN5000_SCHED_TRANS_TBL(qid), 7556 wn->id << 4 | tid); 7557 7558 /* Enable chain-building mode for the queue. */ 7559 iwn_prph_setbits(sc, IWN5000_SCHED_QCHAIN_SEL, 1 << qid); 7560 7561 /* Enable aggregation for the queue. */ 7562 iwn_prph_setbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 7563 7564 /* Set starting sequence number from the ADDBA request. */ 7565 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff); 7566 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7567 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 7568 7569 /* Set scheduler window size and frame limit. */ 7570 iwn_mem_write(sc, sc->sched_base + IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 7571 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 7572 7573 /* Enable interrupts for the queue. */ 7574 iwn_prph_setbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 7575 7576 /* Mark the queue as active. */ 7577 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7578 IWN5000_TXQ_STATUS_ACTIVE | iwn_tid2fifo[tid]); 7579 } 7580 7581 static void 7582 iwn5000_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn) 7583 { 7584 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7585 7586 /* Stop TX scheduler while we're changing its configuration. */ 7587 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7588 IWN5000_TXQ_STATUS_CHGACT); 7589 7590 /* Disable aggregation for the queue. */ 7591 iwn_prph_clrbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 7592 7593 /* Set starting sequence number from the ADDBA request. */ 7594 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7595 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 7596 7597 /* Disable interrupts for the queue. */ 7598 iwn_prph_clrbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 7599 7600 /* Mark the queue as inactive. */ 7601 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7602 IWN5000_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid]); 7603 } 7604 7605 /* 7606 * Query calibration tables from the initialization firmware. We do this 7607 * only once at first boot. Called from a process context. 7608 */ 7609 static int 7610 iwn5000_query_calibration(struct iwn_softc *sc) 7611 { 7612 struct iwn5000_calib_config cmd; 7613 int error; 7614 7615 memset(&cmd, 0, sizeof cmd); 7616 cmd.ucode.once.enable = htole32(0xffffffff); 7617 cmd.ucode.once.start = htole32(0xffffffff); 7618 cmd.ucode.once.send = htole32(0xffffffff); 7619 cmd.ucode.flags = htole32(0xffffffff); 7620 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending calibration query\n", 7621 __func__); 7622 error = iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof cmd, 0); 7623 if (error != 0) 7624 return error; 7625 7626 /* Wait at most two seconds for calibration to complete. */ 7627 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) 7628 error = iwn_sleep(sc, sc, PCATCH, "iwncal", 2 * hz); 7629 return error; 7630 } 7631 7632 /* 7633 * Send calibration results to the runtime firmware. These results were 7634 * obtained on first boot from the initialization firmware. 7635 */ 7636 static int 7637 iwn5000_send_calibration(struct iwn_softc *sc) 7638 { 7639 int idx, error; 7640 7641 for (idx = 0; idx < IWN5000_PHY_CALIB_MAX_RESULT; idx++) { 7642 if (!(sc->base_params->calib_need & (1<<idx))) { 7643 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7644 "No need of calib %d\n", 7645 idx); 7646 continue; /* no need for this calib */ 7647 } 7648 if (sc->calibcmd[idx].buf == NULL) { 7649 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7650 "Need calib idx : %d but no available data\n", 7651 idx); 7652 continue; 7653 } 7654 7655 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7656 "send calibration result idx=%d len=%d\n", idx, 7657 sc->calibcmd[idx].len); 7658 error = iwn_cmd(sc, IWN_CMD_PHY_CALIB, sc->calibcmd[idx].buf, 7659 sc->calibcmd[idx].len, 0); 7660 if (error != 0) { 7661 device_printf(sc->sc_dev, 7662 "%s: could not send calibration result, error %d\n", 7663 __func__, error); 7664 return error; 7665 } 7666 } 7667 return 0; 7668 } 7669 7670 static int 7671 iwn5000_send_wimax_coex(struct iwn_softc *sc) 7672 { 7673 struct iwn5000_wimax_coex wimax; 7674 7675 #if 0 7676 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 7677 /* Enable WiMAX coexistence for combo adapters. */ 7678 wimax.flags = 7679 IWN_WIMAX_COEX_ASSOC_WA_UNMASK | 7680 IWN_WIMAX_COEX_UNASSOC_WA_UNMASK | 7681 IWN_WIMAX_COEX_STA_TABLE_VALID | 7682 IWN_WIMAX_COEX_ENABLE; 7683 memcpy(wimax.events, iwn6050_wimax_events, 7684 sizeof iwn6050_wimax_events); 7685 } else 7686 #endif 7687 { 7688 /* Disable WiMAX coexistence. */ 7689 wimax.flags = 0; 7690 memset(wimax.events, 0, sizeof wimax.events); 7691 } 7692 DPRINTF(sc, IWN_DEBUG_RESET, "%s: Configuring WiMAX coexistence\n", 7693 __func__); 7694 return iwn_cmd(sc, IWN5000_CMD_WIMAX_COEX, &wimax, sizeof wimax, 0); 7695 } 7696 7697 static int 7698 iwn5000_crystal_calib(struct iwn_softc *sc) 7699 { 7700 struct iwn5000_phy_calib_crystal cmd; 7701 7702 memset(&cmd, 0, sizeof cmd); 7703 cmd.code = IWN5000_PHY_CALIB_CRYSTAL; 7704 cmd.ngroups = 1; 7705 cmd.isvalid = 1; 7706 cmd.cap_pin[0] = le32toh(sc->eeprom_crystal) & 0xff; 7707 cmd.cap_pin[1] = (le32toh(sc->eeprom_crystal) >> 16) & 0xff; 7708 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "sending crystal calibration %d, %d\n", 7709 cmd.cap_pin[0], cmd.cap_pin[1]); 7710 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7711 } 7712 7713 static int 7714 iwn5000_temp_offset_calib(struct iwn_softc *sc) 7715 { 7716 struct iwn5000_phy_calib_temp_offset cmd; 7717 7718 memset(&cmd, 0, sizeof cmd); 7719 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET; 7720 cmd.ngroups = 1; 7721 cmd.isvalid = 1; 7722 if (sc->eeprom_temp != 0) 7723 cmd.offset = htole16(sc->eeprom_temp); 7724 else 7725 cmd.offset = htole16(IWN_DEFAULT_TEMP_OFFSET); 7726 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "setting radio sensor offset to %d\n", 7727 le16toh(cmd.offset)); 7728 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7729 } 7730 7731 static int 7732 iwn5000_temp_offset_calibv2(struct iwn_softc *sc) 7733 { 7734 struct iwn5000_phy_calib_temp_offsetv2 cmd; 7735 7736 memset(&cmd, 0, sizeof cmd); 7737 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET; 7738 cmd.ngroups = 1; 7739 cmd.isvalid = 1; 7740 if (sc->eeprom_temp != 0) { 7741 cmd.offset_low = htole16(sc->eeprom_temp); 7742 cmd.offset_high = htole16(sc->eeprom_temp_high); 7743 } else { 7744 cmd.offset_low = htole16(IWN_DEFAULT_TEMP_OFFSET); 7745 cmd.offset_high = htole16(IWN_DEFAULT_TEMP_OFFSET); 7746 } 7747 cmd.burnt_voltage_ref = htole16(sc->eeprom_voltage); 7748 7749 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7750 "setting radio sensor low offset to %d, high offset to %d, voltage to %d\n", 7751 le16toh(cmd.offset_low), 7752 le16toh(cmd.offset_high), 7753 le16toh(cmd.burnt_voltage_ref)); 7754 7755 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7756 } 7757 7758 /* 7759 * This function is called after the runtime firmware notifies us of its 7760 * readiness (called in a process context). 7761 */ 7762 static int 7763 iwn4965_post_alive(struct iwn_softc *sc) 7764 { 7765 int error, qid; 7766 7767 if ((error = iwn_nic_lock(sc)) != 0) 7768 return error; 7769 7770 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7771 7772 /* Clear TX scheduler state in SRAM. */ 7773 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 7774 iwn_mem_set_region_4(sc, sc->sched_base + IWN4965_SCHED_CTX_OFF, 0, 7775 IWN4965_SCHED_CTX_LEN / sizeof (uint32_t)); 7776 7777 /* Set physical address of TX scheduler rings (1KB aligned). */ 7778 iwn_prph_write(sc, IWN4965_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 7779 7780 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 7781 7782 /* Disable chain mode for all our 16 queues. */ 7783 iwn_prph_write(sc, IWN4965_SCHED_QCHAIN_SEL, 0); 7784 7785 for (qid = 0; qid < IWN4965_NTXQUEUES; qid++) { 7786 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), 0); 7787 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 7788 7789 /* Set scheduler window size. */ 7790 iwn_mem_write(sc, sc->sched_base + 7791 IWN4965_SCHED_QUEUE_OFFSET(qid), IWN_SCHED_WINSZ); 7792 /* Set scheduler frame limit. */ 7793 iwn_mem_write(sc, sc->sched_base + 7794 IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 7795 IWN_SCHED_LIMIT << 16); 7796 } 7797 7798 /* Enable interrupts for all our 16 queues. */ 7799 iwn_prph_write(sc, IWN4965_SCHED_INTR_MASK, 0xffff); 7800 /* Identify TX FIFO rings (0-7). */ 7801 iwn_prph_write(sc, IWN4965_SCHED_TXFACT, 0xff); 7802 7803 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7804 for (qid = 0; qid < 7; qid++) { 7805 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 4, 5, 6 }; 7806 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7807 IWN4965_TXQ_STATUS_ACTIVE | qid2fifo[qid] << 1); 7808 } 7809 iwn_nic_unlock(sc); 7810 return 0; 7811 } 7812 7813 /* 7814 * This function is called after the initialization or runtime firmware 7815 * notifies us of its readiness (called in a process context). 7816 */ 7817 static int 7818 iwn5000_post_alive(struct iwn_softc *sc) 7819 { 7820 int error, qid; 7821 7822 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7823 7824 /* Switch to using ICT interrupt mode. */ 7825 iwn5000_ict_reset(sc); 7826 7827 if ((error = iwn_nic_lock(sc)) != 0){ 7828 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 7829 return error; 7830 } 7831 7832 /* Clear TX scheduler state in SRAM. */ 7833 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 7834 iwn_mem_set_region_4(sc, sc->sched_base + IWN5000_SCHED_CTX_OFF, 0, 7835 IWN5000_SCHED_CTX_LEN / sizeof (uint32_t)); 7836 7837 /* Set physical address of TX scheduler rings (1KB aligned). */ 7838 iwn_prph_write(sc, IWN5000_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 7839 7840 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 7841 7842 /* Enable chain mode for all queues, except command queue. */ 7843 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 7844 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffdf); 7845 else 7846 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffef); 7847 iwn_prph_write(sc, IWN5000_SCHED_AGGR_SEL, 0); 7848 7849 for (qid = 0; qid < IWN5000_NTXQUEUES; qid++) { 7850 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), 0); 7851 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 7852 7853 iwn_mem_write(sc, sc->sched_base + 7854 IWN5000_SCHED_QUEUE_OFFSET(qid), 0); 7855 /* Set scheduler window size and frame limit. */ 7856 iwn_mem_write(sc, sc->sched_base + 7857 IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 7858 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 7859 } 7860 7861 /* Enable interrupts for all our 20 queues. */ 7862 iwn_prph_write(sc, IWN5000_SCHED_INTR_MASK, 0xfffff); 7863 /* Identify TX FIFO rings (0-7). */ 7864 iwn_prph_write(sc, IWN5000_SCHED_TXFACT, 0xff); 7865 7866 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7867 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) { 7868 /* Mark TX rings as active. */ 7869 for (qid = 0; qid < 11; qid++) { 7870 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 0, 4, 2, 5, 4, 7, 5 }; 7871 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7872 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 7873 } 7874 } else { 7875 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7876 for (qid = 0; qid < 7; qid++) { 7877 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 7, 5, 6 }; 7878 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7879 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 7880 } 7881 } 7882 iwn_nic_unlock(sc); 7883 7884 /* Configure WiMAX coexistence for combo adapters. */ 7885 error = iwn5000_send_wimax_coex(sc); 7886 if (error != 0) { 7887 device_printf(sc->sc_dev, 7888 "%s: could not configure WiMAX coexistence, error %d\n", 7889 __func__, error); 7890 return error; 7891 } 7892 if (sc->hw_type != IWN_HW_REV_TYPE_5150) { 7893 /* Perform crystal calibration. */ 7894 error = iwn5000_crystal_calib(sc); 7895 if (error != 0) { 7896 device_printf(sc->sc_dev, 7897 "%s: crystal calibration failed, error %d\n", 7898 __func__, error); 7899 return error; 7900 } 7901 } 7902 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) { 7903 /* Query calibration from the initialization firmware. */ 7904 if ((error = iwn5000_query_calibration(sc)) != 0) { 7905 device_printf(sc->sc_dev, 7906 "%s: could not query calibration, error %d\n", 7907 __func__, error); 7908 return error; 7909 } 7910 /* 7911 * We have the calibration results now, reboot with the 7912 * runtime firmware (call ourselves recursively!) 7913 */ 7914 iwn_hw_stop(sc); 7915 error = iwn_hw_init(sc); 7916 } else { 7917 /* Send calibration results to runtime firmware. */ 7918 error = iwn5000_send_calibration(sc); 7919 } 7920 7921 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7922 7923 return error; 7924 } 7925 7926 /* 7927 * The firmware boot code is small and is intended to be copied directly into 7928 * the NIC internal memory (no DMA transfer). 7929 */ 7930 static int 7931 iwn4965_load_bootcode(struct iwn_softc *sc, const uint8_t *ucode, int size) 7932 { 7933 int error, ntries; 7934 7935 size /= sizeof (uint32_t); 7936 7937 if ((error = iwn_nic_lock(sc)) != 0) 7938 return error; 7939 7940 /* Copy microcode image into NIC memory. */ 7941 iwn_prph_write_region_4(sc, IWN_BSM_SRAM_BASE, 7942 (const uint32_t *)ucode, size); 7943 7944 iwn_prph_write(sc, IWN_BSM_WR_MEM_SRC, 0); 7945 iwn_prph_write(sc, IWN_BSM_WR_MEM_DST, IWN_FW_TEXT_BASE); 7946 iwn_prph_write(sc, IWN_BSM_WR_DWCOUNT, size); 7947 7948 /* Start boot load now. */ 7949 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START); 7950 7951 /* Wait for transfer to complete. */ 7952 for (ntries = 0; ntries < 1000; ntries++) { 7953 if (!(iwn_prph_read(sc, IWN_BSM_WR_CTRL) & 7954 IWN_BSM_WR_CTRL_START)) 7955 break; 7956 DELAY(10); 7957 } 7958 if (ntries == 1000) { 7959 device_printf(sc->sc_dev, "%s: could not load boot firmware\n", 7960 __func__); 7961 iwn_nic_unlock(sc); 7962 return ETIMEDOUT; 7963 } 7964 7965 /* Enable boot after power up. */ 7966 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START_EN); 7967 7968 iwn_nic_unlock(sc); 7969 return 0; 7970 } 7971 7972 static int 7973 iwn4965_load_firmware(struct iwn_softc *sc) 7974 { 7975 struct iwn_fw_info *fw = &sc->fw; 7976 struct iwn_dma_info *dma = &sc->fw_dma; 7977 int error; 7978 7979 /* Copy initialization sections into pre-allocated DMA-safe memory. */ 7980 memcpy(dma->vaddr, fw->init.data, fw->init.datasz); 7981 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7982 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ, 7983 fw->init.text, fw->init.textsz); 7984 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7985 7986 /* Tell adapter where to find initialization sections. */ 7987 if ((error = iwn_nic_lock(sc)) != 0) 7988 return error; 7989 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 7990 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->init.datasz); 7991 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 7992 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 7993 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, fw->init.textsz); 7994 iwn_nic_unlock(sc); 7995 7996 /* Load firmware boot code. */ 7997 error = iwn4965_load_bootcode(sc, fw->boot.text, fw->boot.textsz); 7998 if (error != 0) { 7999 device_printf(sc->sc_dev, "%s: could not load boot firmware\n", 8000 __func__); 8001 return error; 8002 } 8003 /* Now press "execute". */ 8004 IWN_WRITE(sc, IWN_RESET, 0); 8005 8006 /* Wait at most one second for first alive notification. */ 8007 if ((error = iwn_sleep(sc, sc, PCATCH, "iwninit", hz)) != 0) { 8008 device_printf(sc->sc_dev, 8009 "%s: timeout waiting for adapter to initialize, error %d\n", 8010 __func__, error); 8011 return error; 8012 } 8013 8014 /* Retrieve current temperature for initial TX power calibration. */ 8015 sc->rawtemp = sc->ucode_info.temp[3].chan20MHz; 8016 sc->temp = iwn4965_get_temperature(sc); 8017 8018 /* Copy runtime sections into pre-allocated DMA-safe memory. */ 8019 memcpy(dma->vaddr, fw->main.data, fw->main.datasz); 8020 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8021 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ, 8022 fw->main.text, fw->main.textsz); 8023 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8024 8025 /* Tell adapter where to find runtime sections. */ 8026 if ((error = iwn_nic_lock(sc)) != 0) 8027 return error; 8028 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 8029 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->main.datasz); 8030 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 8031 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 8032 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, 8033 IWN_FW_UPDATED | fw->main.textsz); 8034 iwn_nic_unlock(sc); 8035 8036 return 0; 8037 } 8038 8039 static int 8040 iwn5000_load_firmware_section(struct iwn_softc *sc, uint32_t dst, 8041 const uint8_t *section, int size) 8042 { 8043 struct iwn_dma_info *dma = &sc->fw_dma; 8044 int error; 8045 8046 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8047 8048 /* Copy firmware section into pre-allocated DMA-safe memory. */ 8049 memcpy(dma->vaddr, section, size); 8050 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8051 8052 if ((error = iwn_nic_lock(sc)) != 0) 8053 return error; 8054 8055 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 8056 IWN_FH_TX_CONFIG_DMA_PAUSE); 8057 8058 IWN_WRITE(sc, IWN_FH_SRAM_ADDR(IWN_SRVC_DMACHNL), dst); 8059 IWN_WRITE(sc, IWN_FH_TFBD_CTRL0(IWN_SRVC_DMACHNL), 8060 IWN_LOADDR(dma->paddr)); 8061 IWN_WRITE(sc, IWN_FH_TFBD_CTRL1(IWN_SRVC_DMACHNL), 8062 IWN_HIADDR(dma->paddr) << 28 | size); 8063 IWN_WRITE(sc, IWN_FH_TXBUF_STATUS(IWN_SRVC_DMACHNL), 8064 IWN_FH_TXBUF_STATUS_TBNUM(1) | 8065 IWN_FH_TXBUF_STATUS_TBIDX(1) | 8066 IWN_FH_TXBUF_STATUS_TFBD_VALID); 8067 8068 /* Kick Flow Handler to start DMA transfer. */ 8069 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 8070 IWN_FH_TX_CONFIG_DMA_ENA | IWN_FH_TX_CONFIG_CIRQ_HOST_ENDTFD); 8071 8072 iwn_nic_unlock(sc); 8073 8074 /* Wait at most five seconds for FH DMA transfer to complete. */ 8075 return iwn_sleep(sc, sc, PCATCH, "iwninit", 5 * hz); 8076 } 8077 8078 static int 8079 iwn5000_load_firmware(struct iwn_softc *sc) 8080 { 8081 struct iwn_fw_part *fw; 8082 int error; 8083 8084 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8085 8086 /* Load the initialization firmware on first boot only. */ 8087 fw = (sc->sc_flags & IWN_FLAG_CALIB_DONE) ? 8088 &sc->fw.main : &sc->fw.init; 8089 8090 error = iwn5000_load_firmware_section(sc, IWN_FW_TEXT_BASE, 8091 fw->text, fw->textsz); 8092 if (error != 0) { 8093 device_printf(sc->sc_dev, 8094 "%s: could not load firmware %s section, error %d\n", 8095 __func__, ".text", error); 8096 return error; 8097 } 8098 error = iwn5000_load_firmware_section(sc, IWN_FW_DATA_BASE, 8099 fw->data, fw->datasz); 8100 if (error != 0) { 8101 device_printf(sc->sc_dev, 8102 "%s: could not load firmware %s section, error %d\n", 8103 __func__, ".data", error); 8104 return error; 8105 } 8106 8107 /* Now press "execute". */ 8108 IWN_WRITE(sc, IWN_RESET, 0); 8109 return 0; 8110 } 8111 8112 /* 8113 * Extract text and data sections from a legacy firmware image. 8114 */ 8115 static int 8116 iwn_read_firmware_leg(struct iwn_softc *sc, struct iwn_fw_info *fw) 8117 { 8118 const uint32_t *ptr; 8119 size_t hdrlen = 24; 8120 uint32_t rev; 8121 8122 ptr = (const uint32_t *)fw->data; 8123 rev = le32toh(*ptr++); 8124 8125 sc->ucode_rev = rev; 8126 8127 /* Check firmware API version. */ 8128 if (IWN_FW_API(rev) <= 1) { 8129 device_printf(sc->sc_dev, 8130 "%s: bad firmware, need API version >=2\n", __func__); 8131 return EINVAL; 8132 } 8133 if (IWN_FW_API(rev) >= 3) { 8134 /* Skip build number (version 2 header). */ 8135 hdrlen += 4; 8136 ptr++; 8137 } 8138 if (fw->size < hdrlen) { 8139 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8140 __func__, fw->size); 8141 return EINVAL; 8142 } 8143 fw->main.textsz = le32toh(*ptr++); 8144 fw->main.datasz = le32toh(*ptr++); 8145 fw->init.textsz = le32toh(*ptr++); 8146 fw->init.datasz = le32toh(*ptr++); 8147 fw->boot.textsz = le32toh(*ptr++); 8148 8149 /* Check that all firmware sections fit. */ 8150 if (fw->size < hdrlen + fw->main.textsz + fw->main.datasz + 8151 fw->init.textsz + fw->init.datasz + fw->boot.textsz) { 8152 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8153 __func__, fw->size); 8154 return EINVAL; 8155 } 8156 8157 /* Get pointers to firmware sections. */ 8158 fw->main.text = (const uint8_t *)ptr; 8159 fw->main.data = fw->main.text + fw->main.textsz; 8160 fw->init.text = fw->main.data + fw->main.datasz; 8161 fw->init.data = fw->init.text + fw->init.textsz; 8162 fw->boot.text = fw->init.data + fw->init.datasz; 8163 return 0; 8164 } 8165 8166 /* 8167 * Extract text and data sections from a TLV firmware image. 8168 */ 8169 static int 8170 iwn_read_firmware_tlv(struct iwn_softc *sc, struct iwn_fw_info *fw, 8171 uint16_t alt) 8172 { 8173 const struct iwn_fw_tlv_hdr *hdr; 8174 const struct iwn_fw_tlv *tlv; 8175 const uint8_t *ptr, *end; 8176 uint64_t altmask; 8177 uint32_t len, tmp; 8178 8179 if (fw->size < sizeof (*hdr)) { 8180 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8181 __func__, fw->size); 8182 return EINVAL; 8183 } 8184 hdr = (const struct iwn_fw_tlv_hdr *)fw->data; 8185 if (hdr->signature != htole32(IWN_FW_SIGNATURE)) { 8186 device_printf(sc->sc_dev, "%s: bad firmware signature 0x%08x\n", 8187 __func__, le32toh(hdr->signature)); 8188 return EINVAL; 8189 } 8190 DPRINTF(sc, IWN_DEBUG_RESET, "FW: \"%.64s\", build 0x%x\n", hdr->descr, 8191 le32toh(hdr->build)); 8192 sc->ucode_rev = le32toh(hdr->rev); 8193 8194 /* 8195 * Select the closest supported alternative that is less than 8196 * or equal to the specified one. 8197 */ 8198 altmask = le64toh(hdr->altmask); 8199 while (alt > 0 && !(altmask & (1ULL << alt))) 8200 alt--; /* Downgrade. */ 8201 DPRINTF(sc, IWN_DEBUG_RESET, "using alternative %d\n", alt); 8202 8203 ptr = (const uint8_t *)(hdr + 1); 8204 end = (const uint8_t *)(fw->data + fw->size); 8205 8206 /* Parse type-length-value fields. */ 8207 while (ptr + sizeof (*tlv) <= end) { 8208 tlv = (const struct iwn_fw_tlv *)ptr; 8209 len = le32toh(tlv->len); 8210 8211 ptr += sizeof (*tlv); 8212 if (ptr + len > end) { 8213 device_printf(sc->sc_dev, 8214 "%s: firmware too short: %zu bytes\n", __func__, 8215 fw->size); 8216 return EINVAL; 8217 } 8218 /* Skip other alternatives. */ 8219 if (tlv->alt != 0 && tlv->alt != htole16(alt)) 8220 goto next; 8221 8222 switch (le16toh(tlv->type)) { 8223 case IWN_FW_TLV_MAIN_TEXT: 8224 fw->main.text = ptr; 8225 fw->main.textsz = len; 8226 break; 8227 case IWN_FW_TLV_MAIN_DATA: 8228 fw->main.data = ptr; 8229 fw->main.datasz = len; 8230 break; 8231 case IWN_FW_TLV_INIT_TEXT: 8232 fw->init.text = ptr; 8233 fw->init.textsz = len; 8234 break; 8235 case IWN_FW_TLV_INIT_DATA: 8236 fw->init.data = ptr; 8237 fw->init.datasz = len; 8238 break; 8239 case IWN_FW_TLV_BOOT_TEXT: 8240 fw->boot.text = ptr; 8241 fw->boot.textsz = len; 8242 break; 8243 case IWN_FW_TLV_ENH_SENS: 8244 if (!len) 8245 sc->sc_flags |= IWN_FLAG_ENH_SENS; 8246 break; 8247 case IWN_FW_TLV_PHY_CALIB: 8248 tmp = le32toh(*ptr); 8249 if (tmp < 253) { 8250 sc->reset_noise_gain = tmp; 8251 sc->noise_gain = tmp + 1; 8252 } 8253 break; 8254 case IWN_FW_TLV_PAN: 8255 sc->sc_flags |= IWN_FLAG_PAN_SUPPORT; 8256 DPRINTF(sc, IWN_DEBUG_RESET, 8257 "PAN Support found: %d\n", 1); 8258 break; 8259 case IWN_FW_TLV_FLAGS: 8260 if (len < sizeof(uint32_t)) 8261 break; 8262 if (len % sizeof(uint32_t)) 8263 break; 8264 sc->tlv_feature_flags = le32toh(*ptr); 8265 DPRINTF(sc, IWN_DEBUG_RESET, 8266 "%s: feature: 0x%08x\n", 8267 __func__, 8268 sc->tlv_feature_flags); 8269 break; 8270 case IWN_FW_TLV_PBREQ_MAXLEN: 8271 case IWN_FW_TLV_RUNT_EVTLOG_PTR: 8272 case IWN_FW_TLV_RUNT_EVTLOG_SIZE: 8273 case IWN_FW_TLV_RUNT_ERRLOG_PTR: 8274 case IWN_FW_TLV_INIT_EVTLOG_PTR: 8275 case IWN_FW_TLV_INIT_EVTLOG_SIZE: 8276 case IWN_FW_TLV_INIT_ERRLOG_PTR: 8277 case IWN_FW_TLV_WOWLAN_INST: 8278 case IWN_FW_TLV_WOWLAN_DATA: 8279 DPRINTF(sc, IWN_DEBUG_RESET, 8280 "TLV type %d reconized but not handled\n", 8281 le16toh(tlv->type)); 8282 break; 8283 default: 8284 DPRINTF(sc, IWN_DEBUG_RESET, 8285 "TLV type %d not handled\n", le16toh(tlv->type)); 8286 break; 8287 } 8288 next: /* TLV fields are 32-bit aligned. */ 8289 ptr += (len + 3) & ~3; 8290 } 8291 return 0; 8292 } 8293 8294 static int 8295 iwn_read_firmware(struct iwn_softc *sc) 8296 { 8297 struct iwn_fw_info *fw = &sc->fw; 8298 int error; 8299 8300 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8301 8302 IWN_UNLOCK(sc); 8303 8304 memset(fw, 0, sizeof (*fw)); 8305 8306 /* Read firmware image from filesystem. */ 8307 sc->fw_fp = firmware_get(sc->fwname); 8308 if (sc->fw_fp == NULL) { 8309 device_printf(sc->sc_dev, "%s: could not read firmware %s\n", 8310 __func__, sc->fwname); 8311 IWN_LOCK(sc); 8312 error = EINVAL; 8313 goto done; 8314 } 8315 IWN_LOCK(sc); 8316 8317 fw->size = sc->fw_fp->datasize; 8318 fw->data = (const uint8_t *)sc->fw_fp->data; 8319 if (fw->size < sizeof (uint32_t)) { 8320 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8321 __func__, fw->size); 8322 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8323 sc->fw_fp = NULL; 8324 error = EINVAL; 8325 goto done; 8326 } 8327 8328 /* Retrieve text and data sections. */ 8329 if (*(const uint32_t *)fw->data != 0) /* Legacy image. */ 8330 error = iwn_read_firmware_leg(sc, fw); 8331 else 8332 error = iwn_read_firmware_tlv(sc, fw, 1); 8333 if (error != 0) { 8334 device_printf(sc->sc_dev, 8335 "%s: could not read firmware sections, error %d\n", 8336 __func__, error); 8337 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8338 sc->fw_fp = NULL; 8339 goto done; 8340 } 8341 8342 device_printf(sc->sc_dev, "%s: ucode rev=0x%08x\n", __func__, sc->ucode_rev); 8343 8344 /* Make sure text and data sections fit in hardware memory. */ 8345 if (fw->main.textsz > sc->fw_text_maxsz || 8346 fw->main.datasz > sc->fw_data_maxsz || 8347 fw->init.textsz > sc->fw_text_maxsz || 8348 fw->init.datasz > sc->fw_data_maxsz || 8349 fw->boot.textsz > IWN_FW_BOOT_TEXT_MAXSZ || 8350 (fw->boot.textsz & 3) != 0) { 8351 device_printf(sc->sc_dev, "%s: firmware sections too large\n", 8352 __func__); 8353 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8354 sc->fw_fp = NULL; 8355 error = EINVAL; 8356 } 8357 error = 0; 8358 done: 8359 /* We can proceed with loading the firmware. */ 8360 return error; 8361 } 8362 8363 static int 8364 iwn_clock_wait(struct iwn_softc *sc) 8365 { 8366 int ntries; 8367 8368 /* Set "initialization complete" bit. */ 8369 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 8370 8371 /* Wait for clock stabilization. */ 8372 for (ntries = 0; ntries < 2500; ntries++) { 8373 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_MAC_CLOCK_READY) 8374 return 0; 8375 DELAY(10); 8376 } 8377 device_printf(sc->sc_dev, 8378 "%s: timeout waiting for clock stabilization\n", __func__); 8379 return ETIMEDOUT; 8380 } 8381 8382 static int 8383 iwn_apm_init(struct iwn_softc *sc) 8384 { 8385 uint32_t reg; 8386 int error; 8387 8388 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8389 8390 /* Disable L0s exit timer (NMI bug workaround). */ 8391 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_DIS_L0S_TIMER); 8392 /* Don't wait for ICH L0s (ICH bug workaround). */ 8393 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_L1A_NO_L0S_RX); 8394 8395 /* Set FH wait threshold to max (HW bug under stress workaround). */ 8396 IWN_SETBITS(sc, IWN_DBG_HPET_MEM, 0xffff0000); 8397 8398 /* Enable HAP INTA to move adapter from L1a to L0s. */ 8399 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_HAP_WAKE_L1A); 8400 8401 /* Retrieve PCIe Active State Power Management (ASPM). */ 8402 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + 0x10, 1); 8403 /* Workaround for HW instability in PCIe L0->L0s->L1 transition. */ 8404 if (reg & 0x02) /* L1 Entry enabled. */ 8405 IWN_SETBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 8406 else 8407 IWN_CLRBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 8408 8409 if (sc->base_params->pll_cfg_val) 8410 IWN_SETBITS(sc, IWN_ANA_PLL, sc->base_params->pll_cfg_val); 8411 8412 /* Wait for clock stabilization before accessing prph. */ 8413 if ((error = iwn_clock_wait(sc)) != 0) 8414 return error; 8415 8416 if ((error = iwn_nic_lock(sc)) != 0) 8417 return error; 8418 if (sc->hw_type == IWN_HW_REV_TYPE_4965) { 8419 /* Enable DMA and BSM (Bootstrap State Machine). */ 8420 iwn_prph_write(sc, IWN_APMG_CLK_EN, 8421 IWN_APMG_CLK_CTRL_DMA_CLK_RQT | 8422 IWN_APMG_CLK_CTRL_BSM_CLK_RQT); 8423 } else { 8424 /* Enable DMA. */ 8425 iwn_prph_write(sc, IWN_APMG_CLK_EN, 8426 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 8427 } 8428 DELAY(20); 8429 /* Disable L1-Active. */ 8430 iwn_prph_setbits(sc, IWN_APMG_PCI_STT, IWN_APMG_PCI_STT_L1A_DIS); 8431 iwn_nic_unlock(sc); 8432 8433 return 0; 8434 } 8435 8436 static void 8437 iwn_apm_stop_master(struct iwn_softc *sc) 8438 { 8439 int ntries; 8440 8441 /* Stop busmaster DMA activity. */ 8442 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_STOP_MASTER); 8443 for (ntries = 0; ntries < 100; ntries++) { 8444 if (IWN_READ(sc, IWN_RESET) & IWN_RESET_MASTER_DISABLED) 8445 return; 8446 DELAY(10); 8447 } 8448 device_printf(sc->sc_dev, "%s: timeout waiting for master\n", __func__); 8449 } 8450 8451 static void 8452 iwn_apm_stop(struct iwn_softc *sc) 8453 { 8454 iwn_apm_stop_master(sc); 8455 8456 /* Reset the entire device. */ 8457 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_SW); 8458 DELAY(10); 8459 /* Clear "initialization complete" bit. */ 8460 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 8461 } 8462 8463 static int 8464 iwn4965_nic_config(struct iwn_softc *sc) 8465 { 8466 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8467 8468 if (IWN_RFCFG_TYPE(sc->rfcfg) == 1) { 8469 /* 8470 * I don't believe this to be correct but this is what the 8471 * vendor driver is doing. Probably the bits should not be 8472 * shifted in IWN_RFCFG_*. 8473 */ 8474 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8475 IWN_RFCFG_TYPE(sc->rfcfg) | 8476 IWN_RFCFG_STEP(sc->rfcfg) | 8477 IWN_RFCFG_DASH(sc->rfcfg)); 8478 } 8479 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8480 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 8481 return 0; 8482 } 8483 8484 static int 8485 iwn5000_nic_config(struct iwn_softc *sc) 8486 { 8487 uint32_t tmp; 8488 int error; 8489 8490 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8491 8492 if (IWN_RFCFG_TYPE(sc->rfcfg) < 3) { 8493 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8494 IWN_RFCFG_TYPE(sc->rfcfg) | 8495 IWN_RFCFG_STEP(sc->rfcfg) | 8496 IWN_RFCFG_DASH(sc->rfcfg)); 8497 } 8498 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8499 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 8500 8501 if ((error = iwn_nic_lock(sc)) != 0) 8502 return error; 8503 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_EARLY_PWROFF_DIS); 8504 8505 if (sc->hw_type == IWN_HW_REV_TYPE_1000) { 8506 /* 8507 * Select first Switching Voltage Regulator (1.32V) to 8508 * solve a stability issue related to noisy DC2DC line 8509 * in the silicon of 1000 Series. 8510 */ 8511 tmp = iwn_prph_read(sc, IWN_APMG_DIGITAL_SVR); 8512 tmp &= ~IWN_APMG_DIGITAL_SVR_VOLTAGE_MASK; 8513 tmp |= IWN_APMG_DIGITAL_SVR_VOLTAGE_1_32; 8514 iwn_prph_write(sc, IWN_APMG_DIGITAL_SVR, tmp); 8515 } 8516 iwn_nic_unlock(sc); 8517 8518 if (sc->sc_flags & IWN_FLAG_INTERNAL_PA) { 8519 /* Use internal power amplifier only. */ 8520 IWN_WRITE(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_RADIO_2X2_IPA); 8521 } 8522 if (sc->base_params->additional_nic_config && sc->calib_ver >= 6) { 8523 /* Indicate that ROM calibration version is >=6. */ 8524 IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_CALIB_VER6); 8525 } 8526 if (sc->base_params->additional_gp_drv_bit) 8527 IWN_SETBITS(sc, IWN_GP_DRIVER, 8528 sc->base_params->additional_gp_drv_bit); 8529 return 0; 8530 } 8531 8532 /* 8533 * Take NIC ownership over Intel Active Management Technology (AMT). 8534 */ 8535 static int 8536 iwn_hw_prepare(struct iwn_softc *sc) 8537 { 8538 int ntries; 8539 8540 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8541 8542 /* Check if hardware is ready. */ 8543 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 8544 for (ntries = 0; ntries < 5; ntries++) { 8545 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 8546 IWN_HW_IF_CONFIG_NIC_READY) 8547 return 0; 8548 DELAY(10); 8549 } 8550 8551 /* Hardware not ready, force into ready state. */ 8552 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_PREPARE); 8553 for (ntries = 0; ntries < 15000; ntries++) { 8554 if (!(IWN_READ(sc, IWN_HW_IF_CONFIG) & 8555 IWN_HW_IF_CONFIG_PREPARE_DONE)) 8556 break; 8557 DELAY(10); 8558 } 8559 if (ntries == 15000) 8560 return ETIMEDOUT; 8561 8562 /* Hardware should be ready now. */ 8563 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 8564 for (ntries = 0; ntries < 5; ntries++) { 8565 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 8566 IWN_HW_IF_CONFIG_NIC_READY) 8567 return 0; 8568 DELAY(10); 8569 } 8570 return ETIMEDOUT; 8571 } 8572 8573 static int 8574 iwn_hw_init(struct iwn_softc *sc) 8575 { 8576 struct iwn_ops *ops = &sc->ops; 8577 int error, chnl, qid; 8578 8579 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 8580 8581 /* Clear pending interrupts. */ 8582 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8583 8584 if ((error = iwn_apm_init(sc)) != 0) { 8585 device_printf(sc->sc_dev, 8586 "%s: could not power ON adapter, error %d\n", __func__, 8587 error); 8588 return error; 8589 } 8590 8591 /* Select VMAIN power source. */ 8592 if ((error = iwn_nic_lock(sc)) != 0) 8593 return error; 8594 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_PWR_SRC_MASK); 8595 iwn_nic_unlock(sc); 8596 8597 /* Perform adapter-specific initialization. */ 8598 if ((error = ops->nic_config(sc)) != 0) 8599 return error; 8600 8601 /* Initialize RX ring. */ 8602 if ((error = iwn_nic_lock(sc)) != 0) 8603 return error; 8604 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 8605 IWN_WRITE(sc, IWN_FH_RX_WPTR, 0); 8606 /* Set physical address of RX ring (256-byte aligned). */ 8607 IWN_WRITE(sc, IWN_FH_RX_BASE, sc->rxq.desc_dma.paddr >> 8); 8608 /* Set physical address of RX status (16-byte aligned). */ 8609 IWN_WRITE(sc, IWN_FH_STATUS_WPTR, sc->rxq.stat_dma.paddr >> 4); 8610 /* Enable RX. */ 8611 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 8612 IWN_FH_RX_CONFIG_ENA | 8613 IWN_FH_RX_CONFIG_IGN_RXF_EMPTY | /* HW bug workaround */ 8614 IWN_FH_RX_CONFIG_IRQ_DST_HOST | 8615 IWN_FH_RX_CONFIG_SINGLE_FRAME | 8616 IWN_FH_RX_CONFIG_RB_TIMEOUT(0) | 8617 IWN_FH_RX_CONFIG_NRBD(IWN_RX_RING_COUNT_LOG)); 8618 iwn_nic_unlock(sc); 8619 IWN_WRITE(sc, IWN_FH_RX_WPTR, (IWN_RX_RING_COUNT - 1) & ~7); 8620 8621 if ((error = iwn_nic_lock(sc)) != 0) 8622 return error; 8623 8624 /* Initialize TX scheduler. */ 8625 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 8626 8627 /* Set physical address of "keep warm" page (16-byte aligned). */ 8628 IWN_WRITE(sc, IWN_FH_KW_ADDR, sc->kw_dma.paddr >> 4); 8629 8630 /* Initialize TX rings. */ 8631 for (qid = 0; qid < sc->ntxqs; qid++) { 8632 struct iwn_tx_ring *txq = &sc->txq[qid]; 8633 8634 /* Set physical address of TX ring (256-byte aligned). */ 8635 IWN_WRITE(sc, IWN_FH_CBBC_QUEUE(qid), 8636 txq->desc_dma.paddr >> 8); 8637 } 8638 iwn_nic_unlock(sc); 8639 8640 /* Enable DMA channels. */ 8641 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 8642 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 8643 IWN_FH_TX_CONFIG_DMA_ENA | 8644 IWN_FH_TX_CONFIG_DMA_CREDIT_ENA); 8645 } 8646 8647 /* Clear "radio off" and "commands blocked" bits. */ 8648 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8649 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CMD_BLOCKED); 8650 8651 /* Clear pending interrupts. */ 8652 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8653 /* Enable interrupt coalescing. */ 8654 IWN_WRITE(sc, IWN_INT_COALESCING, 512 / 8); 8655 /* Enable interrupts. */ 8656 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8657 8658 /* _Really_ make sure "radio off" bit is cleared! */ 8659 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8660 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8661 8662 /* Enable shadow registers. */ 8663 if (sc->base_params->shadow_reg_enable) 8664 IWN_SETBITS(sc, IWN_SHADOW_REG_CTRL, 0x800fffff); 8665 8666 if ((error = ops->load_firmware(sc)) != 0) { 8667 device_printf(sc->sc_dev, 8668 "%s: could not load firmware, error %d\n", __func__, 8669 error); 8670 return error; 8671 } 8672 /* Wait at most one second for firmware alive notification. */ 8673 if ((error = iwn_sleep(sc, sc, PCATCH, "iwninit", hz)) != 0) { 8674 device_printf(sc->sc_dev, 8675 "%s: timeout waiting for adapter to initialize, error %d\n", 8676 __func__, error); 8677 return error; 8678 } 8679 /* Do post-firmware initialization. */ 8680 8681 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8682 8683 return ops->post_alive(sc); 8684 } 8685 8686 static void 8687 iwn_hw_stop(struct iwn_softc *sc) 8688 { 8689 int chnl, qid, ntries; 8690 8691 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8692 8693 IWN_WRITE(sc, IWN_RESET, IWN_RESET_NEVO); 8694 8695 /* Disable interrupts. */ 8696 IWN_WRITE(sc, IWN_INT_MASK, 0); 8697 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8698 IWN_WRITE(sc, IWN_FH_INT, 0xffffffff); 8699 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 8700 8701 /* Make sure we no longer hold the NIC lock. */ 8702 iwn_nic_unlock(sc); 8703 8704 /* Stop TX scheduler. */ 8705 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 8706 8707 /* Stop all DMA channels. */ 8708 if (iwn_nic_lock(sc) == 0) { 8709 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 8710 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 0); 8711 for (ntries = 0; ntries < 200; ntries++) { 8712 if (IWN_READ(sc, IWN_FH_TX_STATUS) & 8713 IWN_FH_TX_STATUS_IDLE(chnl)) 8714 break; 8715 DELAY(10); 8716 } 8717 } 8718 iwn_nic_unlock(sc); 8719 } 8720 8721 /* Stop RX ring. */ 8722 iwn_reset_rx_ring(sc, &sc->rxq); 8723 8724 /* Reset all TX rings. */ 8725 for (qid = 0; qid < sc->ntxqs; qid++) 8726 iwn_reset_tx_ring(sc, &sc->txq[qid]); 8727 8728 if (iwn_nic_lock(sc) == 0) { 8729 iwn_prph_write(sc, IWN_APMG_CLK_DIS, 8730 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 8731 iwn_nic_unlock(sc); 8732 } 8733 DELAY(5); 8734 /* Power OFF adapter. */ 8735 iwn_apm_stop(sc); 8736 } 8737 8738 static void 8739 iwn_radio_on(void *arg0, int pending) 8740 { 8741 struct iwn_softc *sc = arg0; 8742 struct ifnet *ifp = sc->sc_ifp; 8743 struct ieee80211com *ic = ifp->if_l2com; 8744 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8745 8746 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8747 8748 if (vap != NULL) { 8749 iwn_init(sc); 8750 ieee80211_init(vap); 8751 } 8752 } 8753 8754 static void 8755 iwn_radio_off(void *arg0, int pending) 8756 { 8757 struct iwn_softc *sc = arg0; 8758 struct ifnet *ifp = sc->sc_ifp; 8759 struct ieee80211com *ic = ifp->if_l2com; 8760 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8761 8762 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8763 8764 iwn_stop(sc); 8765 if (vap != NULL) 8766 ieee80211_stop(vap); 8767 8768 /* Enable interrupts to get RF toggle notification. */ 8769 IWN_LOCK(sc); 8770 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8771 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8772 IWN_UNLOCK(sc); 8773 } 8774 8775 static void 8776 iwn_panicked(void *arg0, int pending) 8777 { 8778 struct iwn_softc *sc = arg0; 8779 struct ifnet *ifp = sc->sc_ifp; 8780 struct ieee80211com *ic = ifp->if_l2com; 8781 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8782 int error; 8783 8784 if (vap == NULL) { 8785 kprintf("%s: null vap\n", __func__); 8786 return; 8787 } 8788 8789 device_printf(sc->sc_dev, "%s: controller panicked, iv_state = %d; " 8790 "resetting...\n", __func__, vap->iv_state); 8791 8792 IWN_LOCK(sc); 8793 8794 iwn_stop_locked(sc); 8795 iwn_init_locked(sc); 8796 if (vap->iv_state >= IEEE80211_S_AUTH && 8797 (error = iwn_auth(sc, vap)) != 0) { 8798 device_printf(sc->sc_dev, 8799 "%s: could not move to auth state\n", __func__); 8800 } 8801 if (vap->iv_state >= IEEE80211_S_RUN && 8802 (error = iwn_run(sc, vap)) != 0) { 8803 device_printf(sc->sc_dev, 8804 "%s: could not move to run state\n", __func__); 8805 } 8806 8807 /* Only run start once the NIC is in a useful state, like associated */ 8808 iwn_start_locked(sc->sc_ifp); 8809 8810 IWN_UNLOCK(sc); 8811 } 8812 8813 static void 8814 iwn_init_locked(struct iwn_softc *sc) 8815 { 8816 struct ifnet *ifp = sc->sc_ifp; 8817 int error; 8818 8819 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 8820 8821 IWN_LOCK_ASSERT(sc); 8822 8823 if ((error = iwn_hw_prepare(sc)) != 0) { 8824 device_printf(sc->sc_dev, "%s: hardware not ready, error %d\n", 8825 __func__, error); 8826 goto fail; 8827 } 8828 8829 /* Initialize interrupt mask to default value. */ 8830 sc->int_mask = IWN_INT_MASK_DEF; 8831 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 8832 8833 /* Check that the radio is not disabled by hardware switch. */ 8834 if (!(IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL)) { 8835 device_printf(sc->sc_dev, 8836 "radio is disabled by hardware switch\n"); 8837 /* Enable interrupts to get RF toggle notifications. */ 8838 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8839 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8840 return; 8841 } 8842 8843 /* Read firmware images from the filesystem. */ 8844 if ((error = iwn_read_firmware(sc)) != 0) { 8845 device_printf(sc->sc_dev, 8846 "%s: could not read firmware, error %d\n", __func__, 8847 error); 8848 goto fail; 8849 } 8850 8851 /* Initialize hardware and upload firmware. */ 8852 error = iwn_hw_init(sc); 8853 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8854 sc->fw_fp = NULL; 8855 if (error != 0) { 8856 device_printf(sc->sc_dev, 8857 "%s: could not initialize hardware, error %d\n", __func__, 8858 error); 8859 goto fail; 8860 } 8861 8862 /* Configure adapter now that it is ready. */ 8863 if ((error = iwn_config(sc)) != 0) { 8864 device_printf(sc->sc_dev, 8865 "%s: could not configure device, error %d\n", __func__, 8866 error); 8867 goto fail; 8868 } 8869 8870 #if defined(__DragonFly__) 8871 ifq_clr_oactive(&ifp->if_snd); 8872 ifp->if_flags |= IFF_RUNNING; 8873 #else 8874 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 8875 ifp->if_drv_flags |= IFF_DRV_RUNNING; 8876 #endif 8877 8878 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc); 8879 8880 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8881 8882 return; 8883 8884 fail: iwn_stop_locked(sc); 8885 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 8886 } 8887 8888 static void 8889 iwn_init(void *arg) 8890 { 8891 struct iwn_softc *sc = arg; 8892 struct ifnet *ifp = sc->sc_ifp; 8893 struct ieee80211com *ic = ifp->if_l2com; 8894 8895 IWN_LOCK(sc); 8896 iwn_init_locked(sc); 8897 IWN_UNLOCK(sc); 8898 8899 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 8900 ieee80211_start_all(ic); 8901 } 8902 8903 static void 8904 iwn_stop_locked(struct iwn_softc *sc) 8905 { 8906 struct ifnet *ifp = sc->sc_ifp; 8907 8908 IWN_LOCK_ASSERT(sc); 8909 8910 sc->sc_is_scanning = 0; 8911 sc->sc_tx_timer = 0; 8912 #if defined(__DragonFly__) 8913 callout_stop_sync(&sc->watchdog_to); 8914 callout_stop_sync(&sc->calib_to); 8915 ifq_clr_oactive(&ifp->if_snd); 8916 ifp->if_flags &= ~IFF_RUNNING; 8917 #else 8918 callout_stop(&sc->watchdog_to); 8919 callout_stop(&sc->calib_to); 8920 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 8921 #endif 8922 8923 /* Power OFF hardware. */ 8924 iwn_hw_stop(sc); 8925 } 8926 8927 static void 8928 iwn_stop(struct iwn_softc *sc) 8929 { 8930 IWN_LOCK(sc); 8931 iwn_stop_locked(sc); 8932 IWN_UNLOCK(sc); 8933 } 8934 8935 /* 8936 * Callback from net80211 to start a scan. 8937 */ 8938 static void 8939 iwn_scan_start(struct ieee80211com *ic) 8940 { 8941 struct ifnet *ifp = ic->ic_ifp; 8942 struct iwn_softc *sc = ifp->if_softc; 8943 8944 IWN_LOCK(sc); 8945 /* make the link LED blink while we're scanning */ 8946 iwn_set_led(sc, IWN_LED_LINK, 20, 2); 8947 IWN_UNLOCK(sc); 8948 } 8949 8950 /* 8951 * Callback from net80211 to terminate a scan. 8952 */ 8953 static void 8954 iwn_scan_end(struct ieee80211com *ic) 8955 { 8956 struct ifnet *ifp = ic->ic_ifp; 8957 struct iwn_softc *sc = ifp->if_softc; 8958 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8959 8960 IWN_LOCK(sc); 8961 if (vap->iv_state == IEEE80211_S_RUN) { 8962 /* Set link LED to ON status if we are associated */ 8963 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 8964 } 8965 IWN_UNLOCK(sc); 8966 } 8967 8968 /* 8969 * Callback from net80211 to force a channel change. 8970 */ 8971 static void 8972 iwn_set_channel(struct ieee80211com *ic) 8973 { 8974 const struct ieee80211_channel *c = ic->ic_curchan; 8975 struct ifnet *ifp = ic->ic_ifp; 8976 struct iwn_softc *sc = ifp->if_softc; 8977 int error; 8978 8979 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8980 8981 IWN_LOCK(sc); 8982 sc->sc_rxtap.wr_chan_freq = htole16(c->ic_freq); 8983 sc->sc_rxtap.wr_chan_flags = htole16(c->ic_flags); 8984 sc->sc_txtap.wt_chan_freq = htole16(c->ic_freq); 8985 sc->sc_txtap.wt_chan_flags = htole16(c->ic_flags); 8986 8987 /* 8988 * Only need to set the channel in Monitor mode. AP scanning and auth 8989 * are already taken care of by their respective firmware commands. 8990 */ 8991 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 8992 error = iwn_config(sc); 8993 if (error != 0) 8994 device_printf(sc->sc_dev, 8995 "%s: error %d settting channel\n", __func__, error); 8996 } 8997 IWN_UNLOCK(sc); 8998 } 8999 9000 /* 9001 * Callback from net80211 to start scanning of the current channel. 9002 */ 9003 static void 9004 iwn_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) 9005 { 9006 struct ieee80211vap *vap = ss->ss_vap; 9007 struct iwn_softc *sc = vap->iv_ic->ic_ifp->if_softc; 9008 struct ieee80211com *ic = vap->iv_ic; 9009 int error; 9010 9011 IWN_LOCK(sc); 9012 error = iwn_scan(sc, vap, ss, ic->ic_curchan); 9013 IWN_UNLOCK(sc); 9014 if (error != 0) 9015 ieee80211_cancel_scan(vap); 9016 } 9017 9018 /* 9019 * Callback from net80211 to handle the minimum dwell time being met. 9020 * The intent is to terminate the scan but we just let the firmware 9021 * notify us when it's finished as we have no safe way to abort it. 9022 */ 9023 static void 9024 iwn_scan_mindwell(struct ieee80211_scan_state *ss) 9025 { 9026 /* NB: don't try to abort scan; wait for firmware to finish */ 9027 } 9028 9029 static void 9030 iwn_hw_reset(void *arg0, int pending) 9031 { 9032 struct iwn_softc *sc = arg0; 9033 struct ifnet *ifp = sc->sc_ifp; 9034 struct ieee80211com *ic = ifp->if_l2com; 9035 9036 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 9037 9038 iwn_stop(sc); 9039 iwn_init(sc); 9040 ieee80211_notify_radio(ic, 1); 9041 } 9042 #ifdef IWN_DEBUG 9043 #define IWN_DESC(x) case x: return #x 9044 #define COUNTOF(array) (sizeof(array) / sizeof(array[0])) 9045 9046 /* 9047 * Translate CSR code to string 9048 */ 9049 static char *iwn_get_csr_string(int csr) 9050 { 9051 switch (csr) { 9052 IWN_DESC(IWN_HW_IF_CONFIG); 9053 IWN_DESC(IWN_INT_COALESCING); 9054 IWN_DESC(IWN_INT); 9055 IWN_DESC(IWN_INT_MASK); 9056 IWN_DESC(IWN_FH_INT); 9057 IWN_DESC(IWN_GPIO_IN); 9058 IWN_DESC(IWN_RESET); 9059 IWN_DESC(IWN_GP_CNTRL); 9060 IWN_DESC(IWN_HW_REV); 9061 IWN_DESC(IWN_EEPROM); 9062 IWN_DESC(IWN_EEPROM_GP); 9063 IWN_DESC(IWN_OTP_GP); 9064 IWN_DESC(IWN_GIO); 9065 IWN_DESC(IWN_GP_UCODE); 9066 IWN_DESC(IWN_GP_DRIVER); 9067 IWN_DESC(IWN_UCODE_GP1); 9068 IWN_DESC(IWN_UCODE_GP2); 9069 IWN_DESC(IWN_LED); 9070 IWN_DESC(IWN_DRAM_INT_TBL); 9071 IWN_DESC(IWN_GIO_CHICKEN); 9072 IWN_DESC(IWN_ANA_PLL); 9073 IWN_DESC(IWN_HW_REV_WA); 9074 IWN_DESC(IWN_DBG_HPET_MEM); 9075 default: 9076 return "UNKNOWN CSR"; 9077 } 9078 } 9079 9080 /* 9081 * This function print firmware register 9082 */ 9083 static void 9084 iwn_debug_register(struct iwn_softc *sc) 9085 { 9086 int i; 9087 static const uint32_t csr_tbl[] = { 9088 IWN_HW_IF_CONFIG, 9089 IWN_INT_COALESCING, 9090 IWN_INT, 9091 IWN_INT_MASK, 9092 IWN_FH_INT, 9093 IWN_GPIO_IN, 9094 IWN_RESET, 9095 IWN_GP_CNTRL, 9096 IWN_HW_REV, 9097 IWN_EEPROM, 9098 IWN_EEPROM_GP, 9099 IWN_OTP_GP, 9100 IWN_GIO, 9101 IWN_GP_UCODE, 9102 IWN_GP_DRIVER, 9103 IWN_UCODE_GP1, 9104 IWN_UCODE_GP2, 9105 IWN_LED, 9106 IWN_DRAM_INT_TBL, 9107 IWN_GIO_CHICKEN, 9108 IWN_ANA_PLL, 9109 IWN_HW_REV_WA, 9110 IWN_DBG_HPET_MEM, 9111 }; 9112 DPRINTF(sc, IWN_DEBUG_REGISTER, 9113 "CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)%s", 9114 "\n"); 9115 for (i = 0; i < COUNTOF(csr_tbl); i++){ 9116 DPRINTF(sc, IWN_DEBUG_REGISTER," %10s: 0x%08x ", 9117 iwn_get_csr_string(csr_tbl[i]), IWN_READ(sc, csr_tbl[i])); 9118 if ((i+1) % 3 == 0) 9119 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n"); 9120 } 9121 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n"); 9122 } 9123 #endif 9124 9125 #if defined(__DragonFly__) 9126 9127 static int 9128 iwn_sleep(struct iwn_softc *sc, void *wchan, 9129 int flags, const char *wmsg, int timo) 9130 { 9131 int iws; 9132 int error; 9133 9134 iws = wlan_is_serialized(); 9135 if (iws) 9136 wlan_serialize_exit(); 9137 error = lksleep(wchan, &sc->sc_mtx, flags, wmsg, timo); 9138 if (iws) 9139 wlan_serialize_enter(); 9140 9141 return error; 9142 } 9143 9144 #else 9145 9146 static int 9147 iwn_sleep(struct iwn_softc *sc, void *wchan, 9148 int flags, const char *wmsg, int timo) 9149 { 9150 int error; 9151 9152 error = lksleep(wchan, &sc->sc_mtx, flags, wmsg, timo); 9153 9154 return error; 9155 } 9156 9157 #endif 9158