1 /****************************************************************************** 2 3 Copyright (c) 2001-2017, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD$*/ 34 35 #include "ixgbe_type.h" 36 #include "ixgbe_82598.h" 37 #include "ixgbe_api.h" 38 #include "ixgbe_common.h" 39 #include "ixgbe_phy.h" 40 41 #define IXGBE_82598_MAX_TX_QUEUES 32 42 #define IXGBE_82598_MAX_RX_QUEUES 64 43 #define IXGBE_82598_RAR_ENTRIES 16 44 #define IXGBE_82598_MC_TBL_SIZE 128 45 #define IXGBE_82598_VFT_TBL_SIZE 128 46 #define IXGBE_82598_RX_PB_SIZE 512 47 48 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 49 ixgbe_link_speed *speed, 50 bool *autoneg); 51 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); 52 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 53 bool autoneg_wait_to_complete); 54 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 55 ixgbe_link_speed *speed, bool *link_up, 56 bool link_up_wait_to_complete); 57 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 58 ixgbe_link_speed speed, 59 bool autoneg_wait_to_complete); 60 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 61 ixgbe_link_speed speed, 62 bool autoneg_wait_to_complete); 63 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); 64 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); 65 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw); 66 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 67 u32 headroom, int strategy); 68 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, 69 u8 *sff8472_data); 70 /** 71 * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout 72 * @hw: pointer to the HW structure 73 * 74 * The defaults for 82598 should be in the range of 50us to 50ms, 75 * however the hardware default for these parts is 500us to 1ms which is less 76 * than the 10ms recommended by the pci-e spec. To address this we need to 77 * increase the value to either 10ms to 250ms for capability version 1 config, 78 * or 16ms to 55ms for version 2. 79 **/ 80 void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) 81 { 82 u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); 83 u16 pcie_devctl2; 84 85 /* only take action if timeout value is defaulted to 0 */ 86 if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) 87 goto out; 88 89 /* 90 * if capababilities version is type 1 we can write the 91 * timeout of 10ms to 250ms through the GCR register 92 */ 93 if (!(gcr & IXGBE_GCR_CAP_VER2)) { 94 gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; 95 goto out; 96 } 97 98 /* 99 * for version 2 capabilities we need to write the config space 100 * directly in order to set the completion timeout value for 101 * 16ms to 55ms 102 */ 103 pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2); 104 pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; 105 IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); 106 out: 107 /* disable completion timeout resend */ 108 gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; 109 IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); 110 } 111 112 /** 113 * ixgbe_init_ops_82598 - Inits func ptrs and MAC type 114 * @hw: pointer to hardware structure 115 * 116 * Initialize the function pointers and assign the MAC type for 82598. 117 * Does not touch the hardware. 118 **/ 119 s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) 120 { 121 struct ixgbe_mac_info *mac = &hw->mac; 122 struct ixgbe_phy_info *phy = &hw->phy; 123 s32 ret_val; 124 125 DEBUGFUNC("ixgbe_init_ops_82598"); 126 127 ret_val = ixgbe_init_phy_ops_generic(hw); 128 ret_val = ixgbe_init_ops_generic(hw); 129 130 /* PHY */ 131 phy->ops.init = ixgbe_init_phy_ops_82598; 132 133 /* MAC */ 134 mac->ops.start_hw = ixgbe_start_hw_82598; 135 mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_82598; 136 mac->ops.reset_hw = ixgbe_reset_hw_82598; 137 mac->ops.get_media_type = ixgbe_get_media_type_82598; 138 mac->ops.get_supported_physical_layer = 139 ixgbe_get_supported_physical_layer_82598; 140 mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82598; 141 mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82598; 142 mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie_82598; 143 mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82598; 144 145 /* RAR, Multicast, VLAN */ 146 mac->ops.set_vmdq = ixgbe_set_vmdq_82598; 147 mac->ops.clear_vmdq = ixgbe_clear_vmdq_82598; 148 mac->ops.set_vfta = ixgbe_set_vfta_82598; 149 mac->ops.set_vlvf = NULL; 150 mac->ops.clear_vfta = ixgbe_clear_vfta_82598; 151 152 /* Flow Control */ 153 mac->ops.fc_enable = ixgbe_fc_enable_82598; 154 155 mac->mcft_size = IXGBE_82598_MC_TBL_SIZE; 156 mac->vft_size = IXGBE_82598_VFT_TBL_SIZE; 157 mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; 158 mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE; 159 mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; 160 mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; 161 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 162 163 /* SFP+ Module */ 164 phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_82598; 165 phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_82598; 166 167 /* Link */ 168 mac->ops.check_link = ixgbe_check_mac_link_82598; 169 mac->ops.setup_link = ixgbe_setup_mac_link_82598; 170 mac->ops.flap_tx_laser = NULL; 171 mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82598; 172 mac->ops.setup_rxpba = ixgbe_set_rxpba_82598; 173 174 /* Manageability interface */ 175 mac->ops.set_fw_drv_ver = NULL; 176 177 mac->ops.get_rtrup2tc = NULL; 178 179 return ret_val; 180 } 181 182 /** 183 * ixgbe_init_phy_ops_82598 - PHY/SFP specific init 184 * @hw: pointer to hardware structure 185 * 186 * Initialize any function pointers that were not able to be 187 * set during init_shared_code because the PHY/SFP type was 188 * not known. Perform the SFP init if necessary. 189 * 190 **/ 191 s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) 192 { 193 struct ixgbe_mac_info *mac = &hw->mac; 194 struct ixgbe_phy_info *phy = &hw->phy; 195 s32 ret_val = IXGBE_SUCCESS; 196 u16 list_offset, data_offset; 197 198 DEBUGFUNC("ixgbe_init_phy_ops_82598"); 199 200 /* Identify the PHY */ 201 phy->ops.identify(hw); 202 203 /* Overwrite the link function pointers if copper PHY */ 204 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { 205 mac->ops.setup_link = ixgbe_setup_copper_link_82598; 206 mac->ops.get_link_capabilities = 207 ixgbe_get_copper_link_capabilities_generic; 208 } 209 210 switch (hw->phy.type) { 211 case ixgbe_phy_tn: 212 phy->ops.setup_link = ixgbe_setup_phy_link_tnx; 213 phy->ops.check_link = ixgbe_check_phy_link_tnx; 214 phy->ops.get_firmware_version = 215 ixgbe_get_phy_firmware_version_tnx; 216 break; 217 case ixgbe_phy_nl: 218 phy->ops.reset = ixgbe_reset_phy_nl; 219 220 /* Call SFP+ identify routine to get the SFP+ module type */ 221 ret_val = phy->ops.identify_sfp(hw); 222 if (ret_val != IXGBE_SUCCESS) 223 goto out; 224 else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { 225 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; 226 goto out; 227 } 228 229 /* Check to see if SFP+ module is supported */ 230 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, 231 &list_offset, 232 &data_offset); 233 if (ret_val != IXGBE_SUCCESS) { 234 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; 235 goto out; 236 } 237 break; 238 default: 239 break; 240 } 241 242 out: 243 return ret_val; 244 } 245 246 /** 247 * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx 248 * @hw: pointer to hardware structure 249 * 250 * Starts the hardware using the generic start_hw function. 251 * Disables relaxed ordering Then set pcie completion timeout 252 * 253 **/ 254 s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) 255 { 256 u32 regval; 257 u32 i; 258 s32 ret_val = IXGBE_SUCCESS; 259 260 DEBUGFUNC("ixgbe_start_hw_82598"); 261 262 ret_val = ixgbe_start_hw_generic(hw); 263 if (ret_val) 264 return ret_val; 265 266 /* Disable relaxed ordering */ 267 for (i = 0; ((i < hw->mac.max_tx_queues) && 268 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 269 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 270 regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; 271 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 272 } 273 274 for (i = 0; ((i < hw->mac.max_rx_queues) && 275 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 276 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 277 regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | 278 IXGBE_DCA_RXCTRL_HEAD_WRO_EN); 279 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 280 } 281 282 /* set the completion timeout for interface */ 283 ixgbe_set_pcie_completion_timeout(hw); 284 285 return ret_val; 286 } 287 288 /** 289 * ixgbe_get_link_capabilities_82598 - Determines link capabilities 290 * @hw: pointer to hardware structure 291 * @speed: pointer to link speed 292 * @autoneg: boolean auto-negotiation value 293 * 294 * Determines the link capabilities by reading the AUTOC register. 295 **/ 296 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 297 ixgbe_link_speed *speed, 298 bool *autoneg) 299 { 300 s32 status = IXGBE_SUCCESS; 301 u32 autoc = 0; 302 303 DEBUGFUNC("ixgbe_get_link_capabilities_82598"); 304 305 /* 306 * Determine link capabilities based on the stored value of AUTOC, 307 * which represents EEPROM defaults. If AUTOC value has not been 308 * stored, use the current register value. 309 */ 310 if (hw->mac.orig_link_settings_stored) 311 autoc = hw->mac.orig_autoc; 312 else 313 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 314 315 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 316 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 317 *speed = IXGBE_LINK_SPEED_1GB_FULL; 318 *autoneg = FALSE; 319 break; 320 321 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 322 *speed = IXGBE_LINK_SPEED_10GB_FULL; 323 *autoneg = FALSE; 324 break; 325 326 case IXGBE_AUTOC_LMS_1G_AN: 327 *speed = IXGBE_LINK_SPEED_1GB_FULL; 328 *autoneg = TRUE; 329 break; 330 331 case IXGBE_AUTOC_LMS_KX4_AN: 332 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 333 *speed = IXGBE_LINK_SPEED_UNKNOWN; 334 if (autoc & IXGBE_AUTOC_KX4_SUPP) 335 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 336 if (autoc & IXGBE_AUTOC_KX_SUPP) 337 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 338 *autoneg = TRUE; 339 break; 340 341 default: 342 status = IXGBE_ERR_LINK_SETUP; 343 break; 344 } 345 346 return status; 347 } 348 349 /** 350 * ixgbe_get_media_type_82598 - Determines media type 351 * @hw: pointer to hardware structure 352 * 353 * Returns the media type (fiber, copper, backplane) 354 **/ 355 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) 356 { 357 enum ixgbe_media_type media_type; 358 359 DEBUGFUNC("ixgbe_get_media_type_82598"); 360 361 /* Detect if there is a copper PHY attached. */ 362 switch (hw->phy.type) { 363 case ixgbe_phy_cu_unknown: 364 case ixgbe_phy_tn: 365 media_type = ixgbe_media_type_copper; 366 goto out; 367 default: 368 break; 369 } 370 371 /* Media type for I82598 is based on device ID */ 372 switch (hw->device_id) { 373 case IXGBE_DEV_ID_82598: 374 case IXGBE_DEV_ID_82598_BX: 375 /* Default device ID is mezzanine card KX/KX4 */ 376 media_type = ixgbe_media_type_backplane; 377 break; 378 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 379 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 380 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 381 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 382 case IXGBE_DEV_ID_82598EB_XF_LR: 383 case IXGBE_DEV_ID_82598EB_SFP_LOM: 384 media_type = ixgbe_media_type_fiber; 385 break; 386 case IXGBE_DEV_ID_82598EB_CX4: 387 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: 388 media_type = ixgbe_media_type_cx4; 389 break; 390 case IXGBE_DEV_ID_82598AT: 391 case IXGBE_DEV_ID_82598AT2: 392 media_type = ixgbe_media_type_copper; 393 break; 394 default: 395 media_type = ixgbe_media_type_unknown; 396 break; 397 } 398 out: 399 return media_type; 400 } 401 402 /** 403 * ixgbe_fc_enable_82598 - Enable flow control 404 * @hw: pointer to hardware structure 405 * 406 * Enable flow control according to the current settings. 407 **/ 408 s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) 409 { 410 s32 ret_val = IXGBE_SUCCESS; 411 u32 fctrl_reg; 412 u32 rmcs_reg; 413 u32 reg; 414 u32 fcrtl, fcrth; 415 u32 link_speed = 0; 416 int i; 417 bool link_up; 418 419 DEBUGFUNC("ixgbe_fc_enable_82598"); 420 421 /* Validate the water mark configuration */ 422 if (!hw->fc.pause_time) { 423 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 424 goto out; 425 } 426 427 /* Low water mark of zero causes XOFF floods */ 428 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { 429 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 430 hw->fc.high_water[i]) { 431 if (!hw->fc.low_water[i] || 432 hw->fc.low_water[i] >= hw->fc.high_water[i]) { 433 DEBUGOUT("Invalid water mark configuration\n"); 434 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 435 goto out; 436 } 437 } 438 } 439 440 /* 441 * On 82598 having Rx FC on causes resets while doing 1G 442 * so if it's on turn it off once we know link_speed. For 443 * more details see 82598 Specification update. 444 */ 445 hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE); 446 if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { 447 switch (hw->fc.requested_mode) { 448 case ixgbe_fc_full: 449 hw->fc.requested_mode = ixgbe_fc_tx_pause; 450 break; 451 case ixgbe_fc_rx_pause: 452 hw->fc.requested_mode = ixgbe_fc_none; 453 break; 454 default: 455 /* no change */ 456 break; 457 } 458 } 459 460 /* Negotiate the fc mode to use */ 461 ixgbe_fc_autoneg(hw); 462 463 /* Disable any previous flow control settings */ 464 fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); 465 fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); 466 467 rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); 468 rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); 469 470 /* 471 * The possible values of fc.current_mode are: 472 * 0: Flow control is completely disabled 473 * 1: Rx flow control is enabled (we can receive pause frames, 474 * but not send pause frames). 475 * 2: Tx flow control is enabled (we can send pause frames but 476 * we do not support receiving pause frames). 477 * 3: Both Rx and Tx flow control (symmetric) are enabled. 478 * other: Invalid. 479 */ 480 switch (hw->fc.current_mode) { 481 case ixgbe_fc_none: 482 /* 483 * Flow control is disabled by software override or autoneg. 484 * The code below will actually disable it in the HW. 485 */ 486 break; 487 case ixgbe_fc_rx_pause: 488 /* 489 * Rx Flow control is enabled and Tx Flow control is 490 * disabled by software override. Since there really 491 * isn't a way to advertise that we are capable of RX 492 * Pause ONLY, we will advertise that we support both 493 * symmetric and asymmetric Rx PAUSE. Later, we will 494 * disable the adapter's ability to send PAUSE frames. 495 */ 496 fctrl_reg |= IXGBE_FCTRL_RFCE; 497 break; 498 case ixgbe_fc_tx_pause: 499 /* 500 * Tx Flow control is enabled, and Rx Flow control is 501 * disabled by software override. 502 */ 503 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 504 break; 505 case ixgbe_fc_full: 506 /* Flow control (both Rx and Tx) is enabled by SW override. */ 507 fctrl_reg |= IXGBE_FCTRL_RFCE; 508 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 509 break; 510 default: 511 DEBUGOUT("Flow control param set incorrectly\n"); 512 ret_val = IXGBE_ERR_CONFIG; 513 goto out; 514 break; 515 } 516 517 /* Set 802.3x based flow control settings. */ 518 fctrl_reg |= IXGBE_FCTRL_DPF; 519 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); 520 IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); 521 522 /* Set up and enable Rx high/low water mark thresholds, enable XON. */ 523 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { 524 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 525 hw->fc.high_water[i]) { 526 fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; 527 fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; 528 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); 529 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); 530 } else { 531 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); 532 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); 533 } 534 535 } 536 537 /* Configure pause time (2 TCs per register) */ 538 reg = hw->fc.pause_time * 0x00010001; 539 for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) 540 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); 541 542 /* Configure flow control refresh threshold value */ 543 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); 544 545 out: 546 return ret_val; 547 } 548 549 /** 550 * ixgbe_start_mac_link_82598 - Configures MAC link settings 551 * @hw: pointer to hardware structure 552 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 553 * 554 * Configures link settings based on values in the ixgbe_hw struct. 555 * Restarts the link. Performs autonegotiation if needed. 556 **/ 557 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 558 bool autoneg_wait_to_complete) 559 { 560 u32 autoc_reg; 561 u32 links_reg; 562 u32 i; 563 s32 status = IXGBE_SUCCESS; 564 565 DEBUGFUNC("ixgbe_start_mac_link_82598"); 566 567 /* Restart link */ 568 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 569 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 570 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); 571 572 /* Only poll for autoneg to complete if specified to do so */ 573 if (autoneg_wait_to_complete) { 574 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == 575 IXGBE_AUTOC_LMS_KX4_AN || 576 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 577 IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 578 links_reg = 0; /* Just in case Autoneg time = 0 */ 579 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 580 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 581 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 582 break; 583 msec_delay(100); 584 } 585 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 586 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; 587 DEBUGOUT("Autonegotiation did not complete.\n"); 588 } 589 } 590 } 591 592 /* Add delay to filter out noises during initial link setup */ 593 msec_delay(50); 594 595 return status; 596 } 597 598 /** 599 * ixgbe_validate_link_ready - Function looks for phy link 600 * @hw: pointer to hardware structure 601 * 602 * Function indicates success when phy link is available. If phy is not ready 603 * within 5 seconds of MAC indicating link, the function returns error. 604 **/ 605 static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) 606 { 607 u32 timeout; 608 u16 an_reg; 609 610 if (hw->device_id != IXGBE_DEV_ID_82598AT2) 611 return IXGBE_SUCCESS; 612 613 for (timeout = 0; 614 timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { 615 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, 616 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg); 617 618 if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) && 619 (an_reg & IXGBE_MII_AUTONEG_LINK_UP)) 620 break; 621 622 msec_delay(100); 623 } 624 625 if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { 626 DEBUGOUT("Link was indicated but link is down\n"); 627 return IXGBE_ERR_LINK_SETUP; 628 } 629 630 return IXGBE_SUCCESS; 631 } 632 633 /** 634 * ixgbe_check_mac_link_82598 - Get link/speed status 635 * @hw: pointer to hardware structure 636 * @speed: pointer to link speed 637 * @link_up: TRUE is link is up, FALSE otherwise 638 * @link_up_wait_to_complete: bool used to wait for link up or not 639 * 640 * Reads the links register to determine if link is up and the current speed 641 **/ 642 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 643 ixgbe_link_speed *speed, bool *link_up, 644 bool link_up_wait_to_complete) 645 { 646 u32 links_reg; 647 u32 i; 648 u16 link_reg, adapt_comp_reg; 649 650 DEBUGFUNC("ixgbe_check_mac_link_82598"); 651 652 /* 653 * SERDES PHY requires us to read link status from undocumented 654 * register 0xC79F. Bit 0 set indicates link is up/ready; clear 655 * indicates link down. OxC00C is read to check that the XAUI lanes 656 * are active. Bit 0 clear indicates active; set indicates inactive. 657 */ 658 if (hw->phy.type == ixgbe_phy_nl) { 659 hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); 660 hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); 661 hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, 662 &adapt_comp_reg); 663 if (link_up_wait_to_complete) { 664 for (i = 0; i < hw->mac.max_link_up_time; i++) { 665 if ((link_reg & 1) && 666 ((adapt_comp_reg & 1) == 0)) { 667 *link_up = TRUE; 668 break; 669 } else { 670 *link_up = FALSE; 671 } 672 msec_delay(100); 673 hw->phy.ops.read_reg(hw, 0xC79F, 674 IXGBE_TWINAX_DEV, 675 &link_reg); 676 hw->phy.ops.read_reg(hw, 0xC00C, 677 IXGBE_TWINAX_DEV, 678 &adapt_comp_reg); 679 } 680 } else { 681 if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) 682 *link_up = TRUE; 683 else 684 *link_up = FALSE; 685 } 686 687 if (*link_up == FALSE) 688 goto out; 689 } 690 691 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 692 if (link_up_wait_to_complete) { 693 for (i = 0; i < hw->mac.max_link_up_time; i++) { 694 if (links_reg & IXGBE_LINKS_UP) { 695 *link_up = TRUE; 696 break; 697 } else { 698 *link_up = FALSE; 699 } 700 msec_delay(100); 701 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 702 } 703 } else { 704 if (links_reg & IXGBE_LINKS_UP) 705 *link_up = TRUE; 706 else 707 *link_up = FALSE; 708 } 709 710 if (links_reg & IXGBE_LINKS_SPEED) 711 *speed = IXGBE_LINK_SPEED_10GB_FULL; 712 else 713 *speed = IXGBE_LINK_SPEED_1GB_FULL; 714 715 if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == TRUE) && 716 (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS)) 717 *link_up = FALSE; 718 719 out: 720 return IXGBE_SUCCESS; 721 } 722 723 /** 724 * ixgbe_setup_mac_link_82598 - Set MAC link speed 725 * @hw: pointer to hardware structure 726 * @speed: new link speed 727 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 728 * 729 * Set the link speed in the AUTOC register and restarts link. 730 **/ 731 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 732 ixgbe_link_speed speed, 733 bool autoneg_wait_to_complete) 734 { 735 bool autoneg = FALSE; 736 s32 status = IXGBE_SUCCESS; 737 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; 738 u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 739 u32 autoc = curr_autoc; 740 u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; 741 742 DEBUGFUNC("ixgbe_setup_mac_link_82598"); 743 744 /* Check to see if speed passed in is supported. */ 745 ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); 746 speed &= link_capabilities; 747 748 if (speed == IXGBE_LINK_SPEED_UNKNOWN) 749 status = IXGBE_ERR_LINK_SETUP; 750 751 /* Set KX4/KX support according to speed requested */ 752 else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || 753 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 754 autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; 755 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 756 autoc |= IXGBE_AUTOC_KX4_SUPP; 757 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 758 autoc |= IXGBE_AUTOC_KX_SUPP; 759 if (autoc != curr_autoc) 760 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); 761 } 762 763 if (status == IXGBE_SUCCESS) { 764 /* 765 * Setup and restart the link based on the new values in 766 * ixgbe_hw This will write the AUTOC register based on the new 767 * stored values 768 */ 769 status = ixgbe_start_mac_link_82598(hw, 770 autoneg_wait_to_complete); 771 } 772 773 return status; 774 } 775 776 777 /** 778 * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field 779 * @hw: pointer to hardware structure 780 * @speed: new link speed 781 * @autoneg_wait_to_complete: TRUE if waiting is needed to complete 782 * 783 * Sets the link speed in the AUTOC register in the MAC and restarts link. 784 **/ 785 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 786 ixgbe_link_speed speed, 787 bool autoneg_wait_to_complete) 788 { 789 s32 status; 790 791 DEBUGFUNC("ixgbe_setup_copper_link_82598"); 792 793 /* Setup the PHY according to input speed */ 794 status = hw->phy.ops.setup_link_speed(hw, speed, 795 autoneg_wait_to_complete); 796 /* Set up MAC */ 797 ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); 798 799 return status; 800 } 801 802 /** 803 * ixgbe_reset_hw_82598 - Performs hardware reset 804 * @hw: pointer to hardware structure 805 * 806 * Resets the hardware by resetting the transmit and receive units, masks and 807 * clears all interrupts, performing a PHY reset, and performing a link (MAC) 808 * reset. 809 **/ 810 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) 811 { 812 s32 status = IXGBE_SUCCESS; 813 s32 phy_status = IXGBE_SUCCESS; 814 u32 ctrl; 815 u32 gheccr; 816 u32 i; 817 u32 autoc; 818 u8 analog_val; 819 820 DEBUGFUNC("ixgbe_reset_hw_82598"); 821 822 /* Call adapter stop to disable tx/rx and clear interrupts */ 823 status = hw->mac.ops.stop_adapter(hw); 824 if (status != IXGBE_SUCCESS) 825 goto reset_hw_out; 826 827 /* 828 * Power up the Atlas Tx lanes if they are currently powered down. 829 * Atlas Tx lanes are powered down for MAC loopback tests, but 830 * they are not automatically restored on reset. 831 */ 832 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); 833 if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { 834 /* Enable Tx Atlas so packets can be transmitted again */ 835 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 836 &analog_val); 837 analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; 838 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 839 analog_val); 840 841 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 842 &analog_val); 843 analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; 844 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 845 analog_val); 846 847 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 848 &analog_val); 849 analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; 850 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 851 analog_val); 852 853 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 854 &analog_val); 855 analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; 856 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 857 analog_val); 858 } 859 860 /* Reset PHY */ 861 if (hw->phy.reset_disable == FALSE) { 862 /* PHY ops must be identified and initialized prior to reset */ 863 864 /* Init PHY and function pointers, perform SFP setup */ 865 phy_status = hw->phy.ops.init(hw); 866 if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) 867 goto reset_hw_out; 868 if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) 869 goto mac_reset_top; 870 871 hw->phy.ops.reset(hw); 872 } 873 874 mac_reset_top: 875 /* 876 * Issue global reset to the MAC. This needs to be a SW reset. 877 * If link reset is used, it might reset the MAC when mng is using it 878 */ 879 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; 880 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 881 IXGBE_WRITE_FLUSH(hw); 882 883 /* Poll for reset bit to self-clear indicating reset is complete */ 884 for (i = 0; i < 10; i++) { 885 usec_delay(1); 886 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 887 if (!(ctrl & IXGBE_CTRL_RST)) 888 break; 889 } 890 if (ctrl & IXGBE_CTRL_RST) { 891 status = IXGBE_ERR_RESET_FAILED; 892 DEBUGOUT("Reset polling failed to complete.\n"); 893 } 894 895 msec_delay(50); 896 897 /* 898 * Double resets are required for recovery from certain error 899 * conditions. Between resets, it is necessary to stall to allow time 900 * for any pending HW events to complete. 901 */ 902 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 903 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 904 goto mac_reset_top; 905 } 906 907 gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); 908 gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); 909 IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); 910 911 /* 912 * Store the original AUTOC value if it has not been 913 * stored off yet. Otherwise restore the stored original 914 * AUTOC value since the reset operation sets back to deaults. 915 */ 916 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 917 if (hw->mac.orig_link_settings_stored == FALSE) { 918 hw->mac.orig_autoc = autoc; 919 hw->mac.orig_link_settings_stored = TRUE; 920 } else if (autoc != hw->mac.orig_autoc) { 921 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); 922 } 923 924 /* Store the permanent mac address */ 925 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 926 927 /* 928 * Store MAC address from RAR0, clear receive address registers, and 929 * clear the multicast table 930 */ 931 hw->mac.ops.init_rx_addrs(hw); 932 933 reset_hw_out: 934 if (phy_status != IXGBE_SUCCESS) 935 status = phy_status; 936 937 return status; 938 } 939 940 /** 941 * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address 942 * @hw: pointer to hardware struct 943 * @rar: receive address register index to associate with a VMDq index 944 * @vmdq: VMDq set index 945 **/ 946 s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 947 { 948 u32 rar_high; 949 u32 rar_entries = hw->mac.num_rar_entries; 950 951 DEBUGFUNC("ixgbe_set_vmdq_82598"); 952 953 /* Make sure we are using a valid rar index range */ 954 if (rar >= rar_entries) { 955 DEBUGOUT1("RAR index %d is out of range.\n", rar); 956 return IXGBE_ERR_INVALID_ARGUMENT; 957 } 958 959 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 960 rar_high &= ~IXGBE_RAH_VIND_MASK; 961 rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); 962 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 963 return IXGBE_SUCCESS; 964 } 965 966 /** 967 * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address 968 * @hw: pointer to hardware struct 969 * @rar: receive address register index to associate with a VMDq index 970 * @vmdq: VMDq clear index (not used in 82598, but elsewhere) 971 **/ 972 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 973 { 974 u32 rar_high; 975 u32 rar_entries = hw->mac.num_rar_entries; 976 977 UNREFERENCED_1PARAMETER(vmdq); 978 979 /* Make sure we are using a valid rar index range */ 980 if (rar >= rar_entries) { 981 DEBUGOUT1("RAR index %d is out of range.\n", rar); 982 return IXGBE_ERR_INVALID_ARGUMENT; 983 } 984 985 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 986 if (rar_high & IXGBE_RAH_VIND_MASK) { 987 rar_high &= ~IXGBE_RAH_VIND_MASK; 988 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 989 } 990 991 return IXGBE_SUCCESS; 992 } 993 994 /** 995 * ixgbe_set_vfta_82598 - Set VLAN filter table 996 * @hw: pointer to hardware structure 997 * @vlan: VLAN id to write to VLAN filter 998 * @vind: VMDq output index that maps queue to VLAN id in VFTA 999 * @vlan_on: boolean flag to turn on/off VLAN in VFTA 1000 * @vlvf_bypass: boolean flag - unused 1001 * 1002 * Turn on/off specified VLAN in the VLAN filter table. 1003 **/ 1004 s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, 1005 bool vlan_on, bool vlvf_bypass) 1006 { 1007 u32 regindex; 1008 u32 bitindex; 1009 u32 bits; 1010 u32 vftabyte; 1011 1012 UNREFERENCED_1PARAMETER(vlvf_bypass); 1013 1014 DEBUGFUNC("ixgbe_set_vfta_82598"); 1015 1016 if (vlan > 4095) 1017 return IXGBE_ERR_PARAM; 1018 1019 /* Determine 32-bit word position in array */ 1020 regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ 1021 1022 /* Determine the location of the (VMD) queue index */ 1023 vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ 1024 bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ 1025 1026 /* Set the nibble for VMD queue index */ 1027 bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); 1028 bits &= (~(0x0F << bitindex)); 1029 bits |= (vind << bitindex); 1030 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); 1031 1032 /* Determine the location of the bit for this VLAN id */ 1033 bitindex = vlan & 0x1F; /* lower five bits */ 1034 1035 bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); 1036 if (vlan_on) 1037 /* Turn on this VLAN id */ 1038 bits |= (1 << bitindex); 1039 else 1040 /* Turn off this VLAN id */ 1041 bits &= ~(1 << bitindex); 1042 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); 1043 1044 return IXGBE_SUCCESS; 1045 } 1046 1047 /** 1048 * ixgbe_clear_vfta_82598 - Clear VLAN filter table 1049 * @hw: pointer to hardware structure 1050 * 1051 * Clears the VLAN filer table, and the VMDq index associated with the filter 1052 **/ 1053 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) 1054 { 1055 u32 offset; 1056 u32 vlanbyte; 1057 1058 DEBUGFUNC("ixgbe_clear_vfta_82598"); 1059 1060 for (offset = 0; offset < hw->mac.vft_size; offset++) 1061 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); 1062 1063 for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) 1064 for (offset = 0; offset < hw->mac.vft_size; offset++) 1065 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 1066 0); 1067 1068 return IXGBE_SUCCESS; 1069 } 1070 1071 /** 1072 * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register 1073 * @hw: pointer to hardware structure 1074 * @reg: analog register to read 1075 * @val: read value 1076 * 1077 * Performs read operation to Atlas analog register specified. 1078 **/ 1079 s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) 1080 { 1081 u32 atlas_ctl; 1082 1083 DEBUGFUNC("ixgbe_read_analog_reg8_82598"); 1084 1085 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, 1086 IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); 1087 IXGBE_WRITE_FLUSH(hw); 1088 usec_delay(10); 1089 atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); 1090 *val = (u8)atlas_ctl; 1091 1092 return IXGBE_SUCCESS; 1093 } 1094 1095 /** 1096 * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register 1097 * @hw: pointer to hardware structure 1098 * @reg: atlas register to write 1099 * @val: value to write 1100 * 1101 * Performs write operation to Atlas analog register specified. 1102 **/ 1103 s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) 1104 { 1105 u32 atlas_ctl; 1106 1107 DEBUGFUNC("ixgbe_write_analog_reg8_82598"); 1108 1109 atlas_ctl = (reg << 8) | val; 1110 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); 1111 IXGBE_WRITE_FLUSH(hw); 1112 usec_delay(10); 1113 1114 return IXGBE_SUCCESS; 1115 } 1116 1117 /** 1118 * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. 1119 * @hw: pointer to hardware structure 1120 * @dev_addr: address to read from 1121 * @byte_offset: byte offset to read from dev_addr 1122 * @eeprom_data: value read 1123 * 1124 * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. 1125 **/ 1126 static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, 1127 u8 byte_offset, u8 *eeprom_data) 1128 { 1129 s32 status = IXGBE_SUCCESS; 1130 u16 sfp_addr = 0; 1131 u16 sfp_data = 0; 1132 u16 sfp_stat = 0; 1133 u16 gssr; 1134 u32 i; 1135 1136 DEBUGFUNC("ixgbe_read_i2c_phy_82598"); 1137 1138 if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) 1139 gssr = IXGBE_GSSR_PHY1_SM; 1140 else 1141 gssr = IXGBE_GSSR_PHY0_SM; 1142 1143 if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) 1144 return IXGBE_ERR_SWFW_SYNC; 1145 1146 if (hw->phy.type == ixgbe_phy_nl) { 1147 /* 1148 * NetLogic phy SDA/SCL registers are at addresses 0xC30A to 1149 * 0xC30D. These registers are used to talk to the SFP+ 1150 * module's EEPROM through the SDA/SCL (I2C) interface. 1151 */ 1152 sfp_addr = (dev_addr << 8) + byte_offset; 1153 sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); 1154 hw->phy.ops.write_reg_mdi(hw, 1155 IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, 1156 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 1157 sfp_addr); 1158 1159 /* Poll status */ 1160 for (i = 0; i < 100; i++) { 1161 hw->phy.ops.read_reg_mdi(hw, 1162 IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, 1163 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 1164 &sfp_stat); 1165 sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; 1166 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) 1167 break; 1168 msec_delay(10); 1169 } 1170 1171 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { 1172 DEBUGOUT("EEPROM read did not pass.\n"); 1173 status = IXGBE_ERR_SFP_NOT_PRESENT; 1174 goto out; 1175 } 1176 1177 /* Read data */ 1178 hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, 1179 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); 1180 1181 *eeprom_data = (u8)(sfp_data >> 8); 1182 } else { 1183 status = IXGBE_ERR_PHY; 1184 } 1185 1186 out: 1187 hw->mac.ops.release_swfw_sync(hw, gssr); 1188 return status; 1189 } 1190 1191 /** 1192 * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. 1193 * @hw: pointer to hardware structure 1194 * @byte_offset: EEPROM byte offset to read 1195 * @eeprom_data: value read 1196 * 1197 * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. 1198 **/ 1199 s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, 1200 u8 *eeprom_data) 1201 { 1202 return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, 1203 byte_offset, eeprom_data); 1204 } 1205 1206 /** 1207 * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. 1208 * @hw: pointer to hardware structure 1209 * @byte_offset: byte offset at address 0xA2 1210 * @sff8472_data: value read 1211 * 1212 * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C 1213 **/ 1214 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, 1215 u8 *sff8472_data) 1216 { 1217 return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, 1218 byte_offset, sff8472_data); 1219 } 1220 1221 /** 1222 * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type 1223 * @hw: pointer to hardware structure 1224 * 1225 * Determines physical layer capabilities of the current configuration. 1226 **/ 1227 u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) 1228 { 1229 u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1230 u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 1231 u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; 1232 u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; 1233 u16 ext_ability = 0; 1234 1235 DEBUGFUNC("ixgbe_get_supported_physical_layer_82598"); 1236 1237 hw->phy.ops.identify(hw); 1238 1239 /* Copper PHY must be checked before AUTOC LMS to determine correct 1240 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ 1241 switch (hw->phy.type) { 1242 case ixgbe_phy_tn: 1243 case ixgbe_phy_cu_unknown: 1244 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, 1245 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); 1246 if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) 1247 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; 1248 if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) 1249 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; 1250 if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) 1251 physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; 1252 goto out; 1253 default: 1254 break; 1255 } 1256 1257 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 1258 case IXGBE_AUTOC_LMS_1G_AN: 1259 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 1260 if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) 1261 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; 1262 else 1263 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; 1264 break; 1265 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 1266 if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) 1267 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; 1268 else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) 1269 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 1270 else /* XAUI */ 1271 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1272 break; 1273 case IXGBE_AUTOC_LMS_KX4_AN: 1274 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 1275 if (autoc & IXGBE_AUTOC_KX_SUPP) 1276 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; 1277 if (autoc & IXGBE_AUTOC_KX4_SUPP) 1278 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 1279 break; 1280 default: 1281 break; 1282 } 1283 1284 if (hw->phy.type == ixgbe_phy_nl) { 1285 hw->phy.ops.identify_sfp(hw); 1286 1287 switch (hw->phy.sfp_type) { 1288 case ixgbe_sfp_type_da_cu: 1289 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1290 break; 1291 case ixgbe_sfp_type_sr: 1292 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1293 break; 1294 case ixgbe_sfp_type_lr: 1295 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1296 break; 1297 default: 1298 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1299 break; 1300 } 1301 } 1302 1303 switch (hw->device_id) { 1304 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 1305 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1306 break; 1307 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 1308 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 1309 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 1310 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1311 break; 1312 case IXGBE_DEV_ID_82598EB_XF_LR: 1313 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1314 break; 1315 default: 1316 break; 1317 } 1318 1319 out: 1320 return physical_layer; 1321 } 1322 1323 /** 1324 * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple 1325 * port devices. 1326 * @hw: pointer to the HW structure 1327 * 1328 * Calls common function and corrects issue with some single port devices 1329 * that enable LAN1 but not LAN0. 1330 **/ 1331 void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) 1332 { 1333 struct ixgbe_bus_info *bus = &hw->bus; 1334 u16 pci_gen = 0; 1335 u16 pci_ctrl2 = 0; 1336 1337 DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598"); 1338 1339 ixgbe_set_lan_id_multi_port_pcie(hw); 1340 1341 /* check if LAN0 is disabled */ 1342 hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); 1343 if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { 1344 1345 hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); 1346 1347 /* if LAN0 is completely disabled force function to 0 */ 1348 if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && 1349 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && 1350 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { 1351 1352 bus->func = 0; 1353 } 1354 } 1355 } 1356 1357 /** 1358 * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering 1359 * @hw: pointer to hardware structure 1360 * 1361 **/ 1362 void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw) 1363 { 1364 u32 regval; 1365 u32 i; 1366 1367 DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598"); 1368 1369 /* Enable relaxed ordering */ 1370 for (i = 0; ((i < hw->mac.max_tx_queues) && 1371 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 1372 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 1373 regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN; 1374 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 1375 } 1376 1377 for (i = 0; ((i < hw->mac.max_rx_queues) && 1378 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 1379 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 1380 regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN | 1381 IXGBE_DCA_RXCTRL_HEAD_WRO_EN; 1382 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 1383 } 1384 1385 } 1386 1387 /** 1388 * ixgbe_set_rxpba_82598 - Initialize RX packet buffer 1389 * @hw: pointer to hardware structure 1390 * @num_pb: number of packet buffers to allocate 1391 * @headroom: reserve n KB of headroom 1392 * @strategy: packet buffer allocation strategy 1393 **/ 1394 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 1395 u32 headroom, int strategy) 1396 { 1397 u32 rxpktsize = IXGBE_RXPBSIZE_64KB; 1398 u8 i = 0; 1399 UNREFERENCED_1PARAMETER(headroom); 1400 1401 if (!num_pb) 1402 return; 1403 1404 /* Setup Rx packet buffer sizes */ 1405 switch (strategy) { 1406 case PBA_STRATEGY_WEIGHTED: 1407 /* Setup the first four at 80KB */ 1408 rxpktsize = IXGBE_RXPBSIZE_80KB; 1409 for (; i < 4; i++) 1410 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1411 /* Setup the last four at 48KB...don't re-init i */ 1412 rxpktsize = IXGBE_RXPBSIZE_48KB; 1413 /* Fall Through */ 1414 case PBA_STRATEGY_EQUAL: 1415 default: 1416 /* Divide the remaining Rx packet buffer evenly among the TCs */ 1417 for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1418 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1419 break; 1420 } 1421 1422 /* Setup Tx packet buffer sizes */ 1423 for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1424 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); 1425 } 1426 1427 /** 1428 * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit 1429 * @hw: pointer to hardware structure 1430 * @regval: register value to write to RXCTRL 1431 * 1432 * Enables the Rx DMA unit 1433 **/ 1434 s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval) 1435 { 1436 DEBUGFUNC("ixgbe_enable_rx_dma_82598"); 1437 1438 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); 1439 1440 return IXGBE_SUCCESS; 1441 } 1442