1 /* 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/dev/mii/mlphy.c,v 1.2.2.3 2001/02/09 09:50:15 asmodai Exp $ 33 * $DragonFly: src/sys/dev/netif/mii_layer/mlphy.c,v 1.9 2006/08/06 10:32:23 sephe Exp $ 34 */ 35 36 /* 37 * driver for Micro Linear 6692 PHYs 38 * 39 * The Micro Linear 6692 is a strange beast, and dealing with it using 40 * this code framework is tricky. The 6692 is actually a 100Mbps-only 41 * device, which means that a second PHY is required to support 10Mbps 42 * modes. However, even though the 6692 does not support 10Mbps modes, 43 * it can still advertise them when performing autonegotiation. If a 44 * 10Mbps mode is negotiated, we must program the registers of the 45 * companion PHY accordingly in addition to programming the registers 46 * of the 6692. 47 * 48 * This device also does not have vendor/device ID registers. 49 */ 50 51 #include <sys/param.h> 52 #include <sys/systm.h> 53 #include <sys/kernel.h> 54 #include <sys/malloc.h> 55 #include <sys/socket.h> 56 #include <sys/module.h> 57 #include <sys/bus.h> 58 59 #include <machine/clock.h> 60 61 #include <net/if.h> 62 #include <net/if_media.h> 63 64 #include "mii.h" 65 #include "miivar.h" 66 67 #include "miibus_if.h" 68 69 #define ML_STATE_AUTO_SELF 1 70 #define ML_STATE_AUTO_OTHER 2 71 72 struct mlphy_softc { 73 struct mii_softc ml_mii; 74 int ml_state; 75 int ml_linked; 76 }; 77 78 static int mlphy_probe (device_t); 79 static int mlphy_attach (device_t); 80 static int mlphy_detach (device_t); 81 82 static device_method_t mlphy_methods[] = { 83 /* device interface */ 84 DEVMETHOD(device_probe, mlphy_probe), 85 DEVMETHOD(device_attach, mlphy_attach), 86 DEVMETHOD(device_detach, mlphy_detach), 87 DEVMETHOD(device_shutdown, bus_generic_shutdown), 88 { 0, 0 } 89 }; 90 91 static devclass_t mlphy_devclass; 92 93 static driver_t mlphy_driver = { 94 "mlphy", 95 mlphy_methods, 96 sizeof(struct mlphy_softc) 97 }; 98 99 DRIVER_MODULE(mlphy, miibus, mlphy_driver, mlphy_devclass, 0, 0); 100 101 static int mlphy_service (struct mii_softc *, struct mii_data *, int); 102 static void mlphy_reset (struct mii_softc *); 103 static void mlphy_status (struct mii_softc *); 104 105 static int 106 mlphy_probe(device_t dev) 107 { 108 struct mii_attach_args *ma; 109 device_t parent; 110 111 ma = device_get_ivars(dev); 112 parent = device_get_parent(device_get_parent(dev)); 113 114 /* 115 * Micro Linear PHY reports oui == 0 model == 0 116 */ 117 if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 || 118 MII_MODEL(ma->mii_id2) != 0) 119 return (ENXIO); 120 121 /* 122 * Make sure the parent is a `tl'. So far, I have only 123 * encountered the 6692 on an Olicom card with a ThunderLAN 124 * controller chip. 125 */ 126 if (strcmp(device_get_name(parent), "tl") != 0) 127 return (ENXIO); 128 129 device_set_desc(dev, "Micro Linear 6692 media interface"); 130 131 return (0); 132 } 133 134 static int 135 mlphy_attach(device_t dev) 136 { 137 struct mlphy_softc *msc; 138 struct mii_softc *sc; 139 struct mii_attach_args *ma; 140 struct mii_data *mii; 141 142 msc = device_get_softc(dev); 143 sc = &msc->ml_mii; 144 ma = device_get_ivars(dev); 145 mii_softc_init(sc, ma); 146 sc->mii_dev = device_get_parent(dev); 147 mii = device_get_softc(sc->mii_dev); 148 LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list); 149 150 sc->mii_inst = mii->mii_instance; 151 sc->mii_service = mlphy_service; 152 sc->mii_reset = mlphy_reset; 153 sc->mii_pdata = mii; 154 155 mii->mii_instance++; 156 157 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL) 158 159 #if 0 /* See above. */ 160 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), 161 MII_MEDIA_NONE); 162 #endif 163 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst), 164 MII_MEDIA_100_TX); 165 166 sc->mii_flags &= ~MIIF_NOISOLATE; 167 mii_phy_reset(sc); 168 sc->mii_flags |= MIIF_NOISOLATE; 169 170 sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 171 172 device_printf(dev, " "); 173 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 174 printf("no media present"); 175 else 176 mii_phy_add_media(sc); 177 printf("\n"); 178 #undef ADD 179 MIIBUS_MEDIAINIT(sc->mii_dev); 180 return(0); 181 } 182 183 static int 184 mlphy_detach(device_t dev) 185 { 186 struct mlphy_softc *sc; 187 188 sc = device_get_softc(dev); 189 mii_phy_auto_stop(&sc->ml_mii); 190 sc->ml_mii.mii_dev = NULL; 191 LIST_REMOVE(&sc->ml_mii, mii_list); 192 193 return(0); 194 } 195 196 static int 197 mlphy_service(struct mii_softc *xsc, struct mii_data *mii, int cmd) 198 { 199 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 200 int reg; 201 struct mii_softc *other = NULL; 202 struct mlphy_softc *msc = (struct mlphy_softc *)xsc; 203 struct mii_softc *sc = (struct mii_softc *)&msc->ml_mii; 204 device_t *devlist; 205 int devs, i; 206 const struct mii_media *mm; 207 208 /* 209 * See if there's another PHY on this bus with us. 210 * If so, we may need it for 10Mbps modes. 211 */ 212 device_get_children(msc->ml_mii.mii_dev, &devlist, &devs); 213 for (i = 0; i < devs; i++) { 214 if (strcmp(device_get_name(devlist[i]), "mlphy")) { 215 other = device_get_softc(devlist[i]); 216 break; 217 } 218 } 219 free(devlist, M_TEMP); 220 221 KKASSERT(ife->ifm_data >= 0 && ife->ifm_data < MII_NMEDIA); 222 mm = &mii_media_table[ife->ifm_data]; 223 224 switch (cmd) { 225 case MII_POLLSTAT: 226 /* 227 * If we're not polling our PHY instance, just return. 228 */ 229 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 230 return (0); 231 break; 232 233 case MII_MEDIACHG: 234 /* 235 * If the media indicates a different PHY instance, 236 * isolate ourselves. 237 */ 238 if (IFM_INST(ife->ifm_media) != sc->mii_inst) { 239 reg = PHY_READ(sc, MII_BMCR); 240 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 241 return (0); 242 } 243 244 /* 245 * If the interface is not up, don't do anything. 246 */ 247 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 248 break; 249 250 switch (IFM_SUBTYPE(ife->ifm_media)) { 251 case IFM_AUTO: 252 /* 253 * For autonegotiation, reset and isolate the 254 * companion PHY (if any) and then do NWAY 255 * autonegotiation ourselves. 256 */ 257 msc->ml_state = ML_STATE_AUTO_SELF; 258 if (other != NULL) { 259 mii_phy_reset(other); 260 PHY_WRITE(other, MII_BMCR, BMCR_ISO); 261 } 262 mii_phy_auto(sc, 1); 263 msc->ml_linked = 0; 264 return(0); 265 266 case IFM_10_T: 267 /* 268 * For 10baseT modes, reset and program the 269 * companion PHY (of any), then program ourselves 270 * to match. This will put us in pass-through 271 * mode and let the companion PHY do all the 272 * work. 273 */ 274 if (other != NULL) { 275 mii_phy_reset(other); 276 PHY_WRITE(other, MII_BMCR, mm->mm_bmcr); 277 } 278 PHY_WRITE(sc, MII_ANAR, mm->mm_anar); 279 PHY_WRITE(sc, MII_BMCR, mm->mm_bmcr); 280 msc->ml_state = 0; 281 break; 282 283 case IFM_100_TX: 284 /* 285 * For 100baseTX modes, reset and isolate the 286 * companion PHY (if any), then program ourselves 287 * accordingly. 288 */ 289 if (other != NULL) { 290 mii_phy_reset(other); 291 PHY_WRITE(other, MII_BMCR, BMCR_ISO); 292 } 293 PHY_WRITE(sc, MII_ANAR, mm->mm_anar); 294 PHY_WRITE(sc, MII_BMCR, mm->mm_bmcr); 295 msc->ml_state = 0; 296 break; 297 298 case IFM_100_T4: 299 /* 300 * XXX Not supported as a manual setting right now. 301 */ 302 return (EINVAL); 303 default: 304 break; 305 } 306 break; 307 308 case MII_TICK: 309 /* 310 * If we're not currently selected, just return. 311 */ 312 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 313 return (0); 314 315 /* 316 * Is the interface even up? 317 */ 318 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 319 return (0); 320 321 /* 322 * Only used for autonegotiation. 323 */ 324 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) 325 break; 326 327 /* 328 * Only retry autonegotiation every 5 seconds. 329 */ 330 if (++sc->mii_ticks <= sc->mii_anegticks) 331 return (0); 332 333 sc->mii_ticks = 0; 334 335 /* 336 * Check to see if we have link. If we do, we don't 337 * need to restart the autonegotiation process. Read 338 * the BMSR twice in case it's latched. 339 * If we're in a 10Mbps mode, check the link of the 340 * 10Mbps PHY. Sometimes the Micro Linear PHY's 341 * linkstat bit will clear while the linkstat bit of 342 * the companion PHY will remain set. 343 */ 344 if (msc->ml_state == ML_STATE_AUTO_OTHER) { 345 reg = PHY_READ(other, MII_BMSR) | 346 PHY_READ(other, MII_BMSR); 347 } else { 348 reg = PHY_READ(sc, MII_BMSR) | 349 PHY_READ(sc, MII_BMSR); 350 } 351 352 if (reg & BMSR_LINK) { 353 if (!msc->ml_linked) { 354 msc->ml_linked = 1; 355 mlphy_status(sc); 356 break; 357 } 358 return(0); 359 } 360 361 msc->ml_linked = 0; 362 mii->mii_media_active = IFM_NONE; 363 mii_phy_reset(sc); 364 msc->ml_state = ML_STATE_AUTO_SELF; 365 if (other != NULL) { 366 mii_phy_reset(other); 367 PHY_WRITE(other, MII_BMCR, BMCR_ISO); 368 } 369 if (mii_phy_auto(sc, 0) == EJUSTRETURN) 370 return(0); 371 break; 372 } 373 374 /* Update the media status. */ 375 if (msc->ml_state == ML_STATE_AUTO_OTHER) { 376 int other_inst; 377 378 other_inst = other->mii_inst; 379 other->mii_inst = sc->mii_inst; 380 other->mii_service(other, mii, MII_POLLSTAT); 381 other->mii_inst = other_inst; 382 sc->mii_media_active = other->mii_media_active; 383 sc->mii_media_status = other->mii_media_status; 384 } else { 385 ukphy_status(sc); 386 } 387 388 /* Callback if something changed. */ 389 mii_phy_update(sc, cmd); 390 return (0); 391 } 392 393 /* 394 * The Micro Linear PHY comes out of reset with the 'autoneg 395 * enable' bit set, which we don't want. 396 */ 397 static void 398 mlphy_reset(struct mii_softc *sc) 399 { 400 int reg; 401 402 mii_phy_reset(sc); 403 reg = PHY_READ(sc, MII_BMCR); 404 reg &= ~BMCR_AUTOEN; 405 PHY_WRITE(sc, MII_BMCR, reg); 406 } 407 408 /* 409 * If we negotiate a 10Mbps mode, we need to check for an alternate 410 * PHY and make sure it's enabled and set correctly. 411 */ 412 static void 413 mlphy_status(struct mii_softc *sc) 414 { 415 struct mlphy_softc *msc = (struct mlphy_softc *)sc; 416 struct mii_data *mii = msc->ml_mii.mii_pdata; 417 struct mii_softc *other = NULL; 418 device_t *devlist; 419 int devs, i; 420 421 /* See if there's another PHY on the bus with us. */ 422 device_get_children(msc->ml_mii.mii_dev, &devlist, &devs); 423 for (i = 0; i < devs; i++) { 424 if (strcmp(device_get_name(devlist[i]), "mlphy")) { 425 other = device_get_softc(devlist[i]); 426 break; 427 } 428 } 429 free(devlist, M_TEMP); 430 431 if (other == NULL) 432 return; 433 434 ukphy_status(sc); 435 436 if (IFM_SUBTYPE(mii->mii_media_active) != IFM_10_T) { 437 msc->ml_state = ML_STATE_AUTO_SELF; 438 mii_phy_reset(other); 439 PHY_WRITE(other, MII_BMCR, BMCR_ISO); 440 } 441 442 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) { 443 msc->ml_state = ML_STATE_AUTO_OTHER; 444 mlphy_reset(&msc->ml_mii); 445 PHY_WRITE(&msc->ml_mii, MII_BMCR, BMCR_ISO); 446 mii_phy_reset(other); 447 mii_phy_auto(other, 1); 448 } 449 } 450