1 /* 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/dev/mii/rlphy.c,v 1.2.2.4 2002/11/08 21:53:49 semenu Exp $ 33 * $DragonFly: src/sys/dev/netif/mii_layer/rlphy.c,v 1.5 2004/09/18 19:32:59 dillon Exp $ 34 * 35 * $FreeBSD: src/sys/dev/mii/rlphy.c,v 1.2.2.4 2002/11/08 21:53:49 semenu Exp $ 36 */ 37 38 /* 39 * driver for RealTek 8139 internal PHYs 40 */ 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/kernel.h> 45 #include <sys/socket.h> 46 #include <sys/bus.h> 47 48 #include <net/if.h> 49 #include <net/if_arp.h> 50 #include <net/if_media.h> 51 52 #include "mii.h" 53 #include "miivar.h" 54 #include "miidevs.h" 55 56 #include <machine/bus.h> 57 #include "../rl/if_rlreg.h" 58 59 #include "miibus_if.h" 60 61 static int rlphy_probe (device_t); 62 static int rlphy_attach (device_t); 63 static int rlphy_detach (device_t); 64 65 static device_method_t rlphy_methods[] = { 66 /* device interface */ 67 DEVMETHOD(device_probe, rlphy_probe), 68 DEVMETHOD(device_attach, rlphy_attach), 69 DEVMETHOD(device_detach, rlphy_detach), 70 DEVMETHOD(device_shutdown, bus_generic_shutdown), 71 { 0, 0 } 72 }; 73 74 static devclass_t rlphy_devclass; 75 76 static driver_t rlphy_driver = { 77 "rlphy", 78 rlphy_methods, 79 sizeof(struct mii_softc) 80 }; 81 82 DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0); 83 84 int rlphy_service (struct mii_softc *, struct mii_data *, int); 85 void rlphy_status (struct mii_softc *); 86 87 static int rlphy_probe(dev) 88 device_t dev; 89 { 90 struct mii_attach_args *ma; 91 device_t parent; 92 93 ma = device_get_ivars(dev); 94 parent = device_get_parent(device_get_parent(dev)); 95 96 /* Test for RealTek 8201L PHY */ 97 if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_REALTEK && 98 MII_MODEL(ma->mii_id2) == MII_MODEL_REALTEK_RTL8201L) { 99 device_set_desc(dev, MII_STR_REALTEK_RTL8201L); 100 return(0); 101 } 102 103 /* 104 * RealTek PHY doesn't have vendor/device ID registers: 105 * the rl driver fakes up a return value of all zeros. 106 */ 107 if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 || 108 MII_MODEL(ma->mii_id2) != 0) 109 return (ENXIO); 110 111 /* 112 * Make sure the parent is an `rl'. 113 */ 114 if (strcmp(device_get_name(parent), "rl") != 0) 115 return (ENXIO); 116 117 device_set_desc(dev, "RealTek internal media interface"); 118 119 return (0); 120 } 121 122 static int rlphy_attach(dev) 123 device_t dev; 124 { 125 struct mii_softc *sc; 126 struct mii_attach_args *ma; 127 struct mii_data *mii; 128 129 sc = device_get_softc(dev); 130 ma = device_get_ivars(dev); 131 mii_softc_init(sc); 132 sc->mii_dev = device_get_parent(dev); 133 mii = device_get_softc(sc->mii_dev); 134 135 /* 136 * The RealTek PHY can never be isolated, so never allow non-zero 137 * instances! 138 */ 139 if (mii->mii_instance != 0) { 140 device_printf(dev, "ignoring this PHY, non-zero instance\n"); 141 return(ENXIO); 142 } 143 144 LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list); 145 146 sc->mii_inst = mii->mii_instance; 147 sc->mii_phy = ma->mii_phyno; 148 sc->mii_service = rlphy_service; 149 sc->mii_pdata = mii; 150 mii->mii_instance++; 151 152 sc->mii_flags |= MIIF_NOISOLATE; 153 154 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL) 155 156 #if 0 /* See above. */ 157 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), 158 BMCR_ISO); 159 #endif 160 161 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst), 162 BMCR_LOOP|BMCR_S100); 163 164 mii_phy_reset(sc); 165 166 sc->mii_capabilities = 167 PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 168 device_printf(dev, " "); 169 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 170 printf("no media present"); 171 else 172 mii_add_media(mii, sc->mii_capabilities, 173 sc->mii_inst); 174 printf("\n"); 175 #undef ADD 176 MIIBUS_MEDIAINIT(sc->mii_dev); 177 return(0); 178 } 179 180 static int rlphy_detach(dev) 181 device_t dev; 182 { 183 struct mii_softc *sc; 184 struct mii_data *mii; 185 186 sc = device_get_softc(dev); 187 mii = device_get_softc(device_get_softc(dev)); 188 mii_phy_auto_stop(sc); 189 sc->mii_dev = NULL; 190 LIST_REMOVE(sc, mii_list); 191 192 return(0); 193 } 194 195 int 196 rlphy_service(sc, mii, cmd) 197 struct mii_softc *sc; 198 struct mii_data *mii; 199 int cmd; 200 { 201 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 202 203 /* 204 * We can't isolate the RealTek PHY, so it has to be the only one! 205 */ 206 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 207 panic("rlphy_service: can't isolate RealTek PHY"); 208 209 switch (cmd) { 210 case MII_POLLSTAT: 211 break; 212 213 case MII_MEDIACHG: 214 /* 215 * If the interface is not up, don't do anything. 216 */ 217 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 218 break; 219 220 switch (IFM_SUBTYPE(ife->ifm_media)) { 221 case IFM_AUTO: 222 /* 223 * If we're already in auto mode, just return. 224 */ 225 if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN) 226 return (0); 227 (void) mii_phy_auto(sc, 0); 228 break; 229 case IFM_100_T4: 230 /* 231 * XXX Not supported as a manual setting right now. 232 */ 233 return (EINVAL); 234 default: 235 /* 236 * BMCR data is stored in the ifmedia entry. 237 */ 238 PHY_WRITE(sc, MII_ANAR, 239 mii_anar(ife->ifm_media)); 240 PHY_WRITE(sc, MII_BMCR, ife->ifm_data); 241 } 242 break; 243 244 case MII_TICK: 245 /* 246 * Only used for autonegotiation. 247 */ 248 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) 249 return (0); 250 251 /* 252 * Is the interface even up? 253 */ 254 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 255 return (0); 256 257 /* 258 * Only retry autonegotiation every 5 seconds. 259 */ 260 if (++sc->mii_ticks != 5) 261 return (0); 262 263 sc->mii_ticks = 0; 264 265 /* 266 * The RealTek PHY's autonegotiation doesn't need to be 267 * kicked; it continues in the background. 268 */ 269 break; 270 } 271 272 /* Update the media status. */ 273 rlphy_status(sc); 274 275 /* Callback if something changed. */ 276 if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) { 277 MIIBUS_STATCHG(sc->mii_dev); 278 sc->mii_active = mii->mii_media_active; 279 } 280 return (0); 281 } 282 283 void 284 rlphy_status(phy) 285 struct mii_softc *phy; 286 { 287 struct mii_data *mii = phy->mii_pdata; 288 int bmsr, bmcr, anlpar; 289 device_t parent; 290 291 mii->mii_media_status = IFM_AVALID; 292 mii->mii_media_active = IFM_ETHER; 293 294 bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR); 295 if (bmsr & BMSR_LINK) 296 mii->mii_media_status |= IFM_ACTIVE; 297 298 bmcr = PHY_READ(phy, MII_BMCR); 299 if (bmcr & BMCR_ISO) { 300 mii->mii_media_active |= IFM_NONE; 301 mii->mii_media_status = 0; 302 return; 303 } 304 305 if (bmcr & BMCR_LOOP) 306 mii->mii_media_active |= IFM_LOOP; 307 308 if (bmcr & BMCR_AUTOEN) { 309 /* 310 * NWay autonegotiation takes the highest-order common 311 * bit of the ANAR and ANLPAR (i.e. best media advertised 312 * both by us and our link partner). 313 */ 314 if ((bmsr & BMSR_ACOMP) == 0) { 315 /* Erg, still trying, I guess... */ 316 mii->mii_media_active |= IFM_NONE; 317 return; 318 } 319 320 if ((anlpar = PHY_READ(phy, MII_ANAR) & 321 PHY_READ(phy, MII_ANLPAR))) { 322 if (anlpar & ANLPAR_T4) 323 mii->mii_media_active |= IFM_100_T4; 324 else if (anlpar & ANLPAR_TX_FD) 325 mii->mii_media_active |= IFM_100_TX|IFM_FDX; 326 else if (anlpar & ANLPAR_TX) 327 mii->mii_media_active |= IFM_100_TX; 328 else if (anlpar & ANLPAR_10_FD) 329 mii->mii_media_active |= IFM_10_T|IFM_FDX; 330 else if (anlpar & ANLPAR_10) 331 mii->mii_media_active |= IFM_10_T; 332 else 333 mii->mii_media_active |= IFM_NONE; 334 return; 335 } 336 /* 337 * If the other side doesn't support NWAY, then the 338 * best we can do is determine if we have a 10Mbps or 339 * 100Mbps link. There's no way to know if the link 340 * is full or half duplex, so we default to half duplex 341 * and hope that the user is clever enough to manually 342 * change the media settings if we're wrong. 343 */ 344 345 346 /* 347 * The RealTek PHY supports non-NWAY link speed 348 * detection, however it does not report the link 349 * detection results via the ANLPAR or BMSR registers. 350 * (What? RealTek doesn't do things the way everyone 351 * else does? I'm just shocked, shocked I tell you.) 352 * To determine the link speed, we have to do one 353 * of two things: 354 * 355 * - If this is a standalone RealTek RTL8201(L) PHY, 356 * we can determine the link speed by testing bit 0 357 * in the magic, vendor-specific register at offset 358 * 0x19. 359 * 360 * - If this is a RealTek MAC with integrated PHY, we 361 * can test the 'SPEED10' bit of the MAC's media status 362 * register. 363 */ 364 parent = device_get_parent(phy->mii_dev); 365 if (strcmp(device_get_name(parent), "rl") != 0) { 366 if (PHY_READ(phy, 0x0019) & 0x01) 367 mii->mii_media_active |= IFM_100_TX; 368 else 369 mii->mii_media_active |= IFM_10_T; 370 } else { 371 if (PHY_READ(phy, RL_MEDIASTAT) & 372 RL_MEDIASTAT_SPEED10) 373 mii->mii_media_active |= IFM_10_T; 374 else 375 mii->mii_media_active |= IFM_100_TX; 376 } 377 378 } else 379 mii->mii_media_active = mii_media_from_bmcr(bmcr); 380 } 381