1 /* 2 * Copyright (c) 2004 3 * Joerg Sonnenberger <joerg@bec.de>. All rights reserved. 4 * 5 * Copyright (c) 1997, 1998-2003 6 * Bill Paul <wpaul@windriver.com>. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by Bill Paul. 19 * 4. Neither the name of the author nor the names of any co-contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 27 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 33 * THE POSSIBILITY OF SUCH DAMAGE. 34 * 35 * $FreeBSD: src/sys/dev/re/if_re.c,v 1.25 2004/06/09 14:34:01 naddy Exp $ 36 */ 37 38 /* 39 * RealTek 8169S/8110S/8168/8111/8101E/8125 PCI NIC driver 40 * 41 * Written by Bill Paul <wpaul@windriver.com> 42 * Senior Networking Software Engineer 43 * Wind River Systems 44 */ 45 46 /* 47 * This driver is designed to support RealTek's next generation of 48 * 10/100 and 10/100/1000 PCI ethernet controllers. There are currently 49 * seven devices in this family: the the RTL8169, the RTL8169S, RTL8110S, 50 * the RTL8168, the RTL8111 and the RTL8101E. 51 * 52 * The 8169 is a 64-bit 10/100/1000 gigabit ethernet MAC: 53 * 54 * o Descriptor based DMA mechanism. Each descriptor represents 55 * a single packet fragment. Data buffers may be aligned on 56 * any byte boundary. 57 * 58 * o 64-bit DMA. 59 * 60 * o TCP/IP checksum offload for both RX and TX. 61 * 62 * o High and normal priority transmit DMA rings. 63 * 64 * o VLAN tag insertion and extraction. 65 * 66 * o TCP large send (segmentation offload). 67 * 68 * o 1000Mbps mode. 69 * 70 * o Jumbo frames. 71 * 72 * o GMII and TBI ports/registers for interfacing with copper 73 * or fiber PHYs. 74 * 75 * o RX and TX DMA rings can have up to 1024 descriptors. 76 * 77 * The 8169 does not have a built-in PHY. Most reference boards use a 78 * Marvell 88E1000 'Alaska' copper gigE PHY. 8169/8110 is _no longer_ 79 * supported. 80 * 81 * The 8169S/8110S 10/100/1000 devices have built-in copper gigE PHYs 82 * (the 'S' stands for 'single-chip'). These devices have the same 83 * programming API as the older 8169, but also have some vendor-specific 84 * registers for the on-board PHY. The 8110S is a LAN-on-motherboard 85 * part designed to be pin-compatible with the RealTek 8100 10/100 chip. 86 * 8125 supports 10/100/1000/2500. 87 * 88 * This driver takes advantage of the RX and TX checksum offload and 89 * VLAN tag insertion/extraction features. It also implements 90 * interrupt moderation using the timer interrupt registers, which 91 * significantly reduces interrupt load. 92 */ 93 94 #define _IP_VHL 95 96 #include "opt_ifpoll.h" 97 98 #include <sys/param.h> 99 #include <sys/bus.h> 100 #include <sys/endian.h> 101 #include <sys/kernel.h> 102 #include <sys/in_cksum.h> 103 #include <sys/interrupt.h> 104 #include <sys/malloc.h> 105 #include <sys/mbuf.h> 106 #include <sys/rman.h> 107 #include <sys/serialize.h> 108 #include <sys/socket.h> 109 #include <sys/sockio.h> 110 #include <sys/sysctl.h> 111 112 #include <net/bpf.h> 113 #include <net/ethernet.h> 114 #include <net/if.h> 115 #include <net/ifq_var.h> 116 #include <net/if_arp.h> 117 #include <net/if_dl.h> 118 #include <net/if_media.h> 119 #include <net/if_poll.h> 120 #include <net/if_types.h> 121 #include <net/vlan/if_vlan_var.h> 122 #include <net/vlan/if_vlan_ether.h> 123 124 #include <netinet/ip.h> 125 126 #include "pcidevs.h" 127 #include <bus/pci/pcireg.h> 128 #include <bus/pci/pcivar.h> 129 130 #include <dev/netif/re/if_rereg.h> 131 #include <dev/netif/re/if_revar.h> 132 #include <dev/netif/re/re.h> 133 #include <dev/netif/re/re_dragonfly.h> 134 135 /* 136 * Various supported device vendors/types and their names. 137 */ 138 static const struct re_type { 139 uint16_t re_vid; 140 uint16_t re_did; 141 const char *re_name; 142 } re_devs[] = { 143 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE528T, 144 "D-Link DGE-528(T) Gigabit Ethernet Adapter" }, 145 146 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8101E, 147 "RealTek 810x PCIe 10/100baseTX" }, 148 149 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8168, 150 "RealTek 8111/8168 PCIe Gigabit Ethernet" }, 151 152 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8168_1, 153 "RealTek 8168 PCIe Gigabit Ethernet" }, 154 155 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8125, 156 "RealTek 8125 PCIe Gigabit Ethernet" }, 157 158 #ifdef notyet 159 /* 160 * This driver now only supports built-in PHYs. 161 */ 162 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169, 163 "RealTek 8110/8169 Gigabit Ethernet" }, 164 #endif 165 166 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169SC, 167 "RealTek 8169SC/8110SC Single-chip Gigabit Ethernet" }, 168 169 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CG_LAPCIGT, 170 "Corega CG-LAPCIGT Gigabit Ethernet" }, 171 172 { PCI_VENDOR_LINKSYS, PCI_PRODUCT_LINKSYS_EG1032, 173 "Linksys EG1032 Gigabit Ethernet" }, 174 175 { PCI_VENDOR_USR2, PCI_PRODUCT_USR2_997902, 176 "US Robotics 997902 Gigabit Ethernet" }, 177 178 { PCI_VENDOR_TTTECH, PCI_PRODUCT_TTTECH_MC322, 179 "TTTech MC322 Gigabit Ethernet" }, 180 181 { 0, 0, NULL } 182 }; 183 184 static int re_probe(device_t); 185 static int re_attach(device_t); 186 static int re_detach(device_t); 187 static int re_suspend(device_t); 188 static int re_resume(device_t); 189 static void re_shutdown(device_t); 190 191 static int re_allocmem(device_t); 192 static void re_freemem(device_t); 193 static void re_freebufmem(struct re_softc *, int, int); 194 static int re_encap(struct re_softc *, struct mbuf **, int *); 195 static int re_newbuf_std(struct re_softc *, int, int); 196 #ifdef RE_JUMBO 197 static int re_newbuf_jumbo(struct re_softc *, int, int); 198 #endif 199 static void re_setup_rxdesc(struct re_softc *, int); 200 static int re_rx_list_init(struct re_softc *); 201 static int re_tx_list_init(struct re_softc *); 202 static int re_rxeof(struct re_softc *); 203 static int re_txeof(struct re_softc *); 204 static int re_tx_collect(struct re_softc *); 205 static void re_intr(void *); 206 static void re_tick(void *); 207 static void re_tick_serialized(void *); 208 static void re_disable_aspm(device_t); 209 static void re_link_up(struct re_softc *); 210 static void re_link_down(struct re_softc *); 211 212 static void re_start_xmit(struct re_softc *); 213 static void re_write_imr(struct re_softc *, uint32_t); 214 static void re_write_isr(struct re_softc *, uint32_t); 215 static uint32_t re_read_isr(struct re_softc *); 216 static void re_start_xmit_8125(struct re_softc *); 217 static void re_write_imr_8125(struct re_softc *, uint32_t); 218 static void re_write_isr_8125(struct re_softc *, uint32_t); 219 static uint32_t re_read_isr_8125(struct re_softc *); 220 221 static void re_start(struct ifnet *, struct ifaltq_subque *); 222 static int re_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 223 static void re_init(void *); 224 static void re_stop(struct re_softc *, boolean_t); 225 static void re_watchdog(struct ifnet *); 226 227 static void re_setup_hw_im(struct re_softc *); 228 static void re_setup_sim_im(struct re_softc *); 229 static void re_disable_hw_im(struct re_softc *); 230 static void re_disable_sim_im(struct re_softc *); 231 static void re_config_imtype(struct re_softc *, int); 232 static void re_setup_intr(struct re_softc *, int, int); 233 234 static int re_sysctl_hwtime(SYSCTL_HANDLER_ARGS, int *); 235 static int re_sysctl_rxtime(SYSCTL_HANDLER_ARGS); 236 static int re_sysctl_txtime(SYSCTL_HANDLER_ARGS); 237 static int re_sysctl_simtime(SYSCTL_HANDLER_ARGS); 238 static int re_sysctl_imtype(SYSCTL_HANDLER_ARGS); 239 240 static int re_jpool_alloc(struct re_softc *); 241 static void re_jpool_free(struct re_softc *); 242 #ifdef RE_JUMBO 243 static struct re_jbuf *re_jbuf_alloc(struct re_softc *); 244 static void re_jbuf_free(void *); 245 static void re_jbuf_ref(void *); 246 #endif 247 248 #ifdef IFPOLL_ENABLE 249 static void re_npoll(struct ifnet *, struct ifpoll_info *); 250 static void re_npoll_compat(struct ifnet *, void *, int); 251 #endif 252 253 static device_method_t re_methods[] = { 254 /* Device interface */ 255 DEVMETHOD(device_probe, re_probe), 256 DEVMETHOD(device_attach, re_attach), 257 DEVMETHOD(device_detach, re_detach), 258 DEVMETHOD(device_suspend, re_suspend), 259 DEVMETHOD(device_resume, re_resume), 260 DEVMETHOD(device_shutdown, re_shutdown), 261 DEVMETHOD_END 262 }; 263 264 static driver_t re_driver = { 265 "re", 266 re_methods, 267 sizeof(struct re_softc) 268 }; 269 270 static devclass_t re_devclass; 271 272 DECLARE_DUMMY_MODULE(if_re); 273 DRIVER_MODULE(if_re, pci, re_driver, re_devclass, NULL, NULL); 274 DRIVER_MODULE(if_re, cardbus, re_driver, re_devclass, NULL, NULL); 275 276 static int re_rx_desc_count = RE_RX_DESC_CNT_DEF; 277 static int re_tx_desc_count = RE_TX_DESC_CNT_DEF; 278 static int re_msi_enable = 1; 279 280 TUNABLE_INT("hw.re.rx_desc_count", &re_rx_desc_count); 281 TUNABLE_INT("hw.re.tx_desc_count", &re_tx_desc_count); 282 TUNABLE_INT("hw.re.msi.enable", &re_msi_enable); 283 284 static __inline void 285 re_free_rxchain(struct re_softc *sc) 286 { 287 if (sc->re_head != NULL) { 288 m_freem(sc->re_head); 289 sc->re_head = sc->re_tail = NULL; 290 } 291 } 292 293 static int 294 re_probe(device_t dev) 295 { 296 const struct re_type *t; 297 uint16_t vendor, product; 298 299 vendor = pci_get_vendor(dev); 300 product = pci_get_device(dev); 301 302 /* 303 * Only attach to rev.3 of the Linksys EG1032 adapter. 304 * Rev.2 is supported by sk(4). 305 */ 306 if (vendor == PCI_VENDOR_LINKSYS && 307 product == PCI_PRODUCT_LINKSYS_EG1032 && 308 pci_get_subdevice(dev) != PCI_SUBDEVICE_LINKSYS_EG1032_REV3) 309 return ENXIO; 310 311 for (t = re_devs; t->re_name != NULL; t++) { 312 if (product == t->re_did && vendor == t->re_vid) 313 break; 314 } 315 if (t->re_name == NULL) 316 return ENXIO; 317 318 device_set_desc(dev, t->re_name); 319 return 0; 320 } 321 322 static int 323 re_allocmem(device_t dev) 324 { 325 struct re_softc *sc = device_get_softc(dev); 326 bus_dmamem_t dmem; 327 int error, i; 328 329 /* 330 * Allocate list data 331 */ 332 sc->re_ldata.re_tx_mbuf = 333 kmalloc(sc->re_tx_desc_cnt * sizeof(struct mbuf *), 334 M_DEVBUF, M_ZERO | M_WAITOK); 335 336 sc->re_ldata.re_rx_mbuf = 337 kmalloc(sc->re_rx_desc_cnt * sizeof(struct mbuf *), 338 M_DEVBUF, M_ZERO | M_WAITOK); 339 340 sc->re_ldata.re_rx_paddr = 341 kmalloc(sc->re_rx_desc_cnt * sizeof(bus_addr_t), 342 M_DEVBUF, M_ZERO | M_WAITOK); 343 344 sc->re_ldata.re_tx_dmamap = 345 kmalloc(sc->re_tx_desc_cnt * sizeof(bus_dmamap_t), 346 M_DEVBUF, M_ZERO | M_WAITOK); 347 348 sc->re_ldata.re_rx_dmamap = 349 kmalloc(sc->re_rx_desc_cnt * sizeof(bus_dmamap_t), 350 M_DEVBUF, M_ZERO | M_WAITOK); 351 352 /* 353 * Allocate the parent bus DMA tag appropriate for PCI. 354 */ 355 error = bus_dma_tag_create(NULL, /* parent */ 356 1, 0, /* alignment, boundary */ 357 BUS_SPACE_MAXADDR, /* lowaddr */ 358 BUS_SPACE_MAXADDR, /* highaddr */ 359 NULL, NULL, /* filter, filterarg */ 360 BUS_SPACE_MAXSIZE_32BIT,/* maxsize */ 361 0, /* nsegments */ 362 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 363 0, /* flags */ 364 &sc->re_parent_tag); 365 if (error) { 366 device_printf(dev, "could not allocate parent dma tag\n"); 367 return error; 368 } 369 370 /* Allocate TX descriptor list. */ 371 error = bus_dmamem_coherent(sc->re_parent_tag, 372 RE_RING_ALIGN, 0, 373 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 374 RE_TX_LIST_SZ(sc), BUS_DMA_WAITOK | BUS_DMA_ZERO, 375 &dmem); 376 if (error) { 377 device_printf(dev, "could not allocate TX ring\n"); 378 return error; 379 } 380 sc->re_ldata.re_tx_list_tag = dmem.dmem_tag; 381 sc->re_ldata.re_tx_list_map = dmem.dmem_map; 382 sc->re_ldata.re_tx_list = dmem.dmem_addr; 383 sc->re_ldata.re_tx_list_addr = dmem.dmem_busaddr; 384 385 /* Allocate RX descriptor list. */ 386 error = bus_dmamem_coherent(sc->re_parent_tag, 387 RE_RING_ALIGN, 0, 388 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 389 RE_RX_LIST_SZ(sc), BUS_DMA_WAITOK | BUS_DMA_ZERO, 390 &dmem); 391 if (error) { 392 device_printf(dev, "could not allocate RX ring\n"); 393 return error; 394 } 395 sc->re_ldata.re_rx_list_tag = dmem.dmem_tag; 396 sc->re_ldata.re_rx_list_map = dmem.dmem_map; 397 sc->re_ldata.re_rx_list = dmem.dmem_addr; 398 sc->re_ldata.re_rx_list_addr = dmem.dmem_busaddr; 399 400 /* Allocate maps for TX mbufs. */ 401 error = bus_dma_tag_create(sc->re_parent_tag, 402 1, 0, 403 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 404 NULL, NULL, 405 RE_FRAMELEN_MAX, RE_MAXSEGS, MCLBYTES, 406 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK | BUS_DMA_ONEBPAGE, 407 &sc->re_ldata.re_tx_mtag); 408 if (error) { 409 device_printf(dev, "could not allocate TX buf dma tag\n"); 410 return(error); 411 } 412 413 /* Create DMA maps for TX buffers */ 414 for (i = 0; i < sc->re_tx_desc_cnt; i++) { 415 error = bus_dmamap_create(sc->re_ldata.re_tx_mtag, 416 BUS_DMA_WAITOK | BUS_DMA_ONEBPAGE, 417 &sc->re_ldata.re_tx_dmamap[i]); 418 if (error) { 419 device_printf(dev, "can't create DMA map for TX buf\n"); 420 re_freebufmem(sc, i, 0); 421 return(error); 422 } 423 } 424 425 /* Allocate maps for RX mbufs. */ 426 error = bus_dma_tag_create(sc->re_parent_tag, 427 RE_RXBUF_ALIGN, 0, 428 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 429 NULL, NULL, 430 MCLBYTES, 1, MCLBYTES, 431 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK | BUS_DMA_ALIGNED, 432 &sc->re_ldata.re_rx_mtag); 433 if (error) { 434 device_printf(dev, "could not allocate RX buf dma tag\n"); 435 return(error); 436 } 437 438 /* Create spare DMA map for RX */ 439 error = bus_dmamap_create(sc->re_ldata.re_rx_mtag, BUS_DMA_WAITOK, 440 &sc->re_ldata.re_rx_spare); 441 if (error) { 442 device_printf(dev, "can't create spare DMA map for RX\n"); 443 bus_dma_tag_destroy(sc->re_ldata.re_rx_mtag); 444 sc->re_ldata.re_rx_mtag = NULL; 445 return error; 446 } 447 448 /* Create DMA maps for RX buffers */ 449 for (i = 0; i < sc->re_rx_desc_cnt; i++) { 450 error = bus_dmamap_create(sc->re_ldata.re_rx_mtag, 451 BUS_DMA_WAITOK, &sc->re_ldata.re_rx_dmamap[i]); 452 if (error) { 453 device_printf(dev, "can't create DMA map for RX buf\n"); 454 re_freebufmem(sc, sc->re_tx_desc_cnt, i); 455 return(error); 456 } 457 } 458 459 /* Create jumbo buffer pool for RX if required */ 460 if (sc->re_caps & RE_C_CONTIGRX) { 461 error = re_jpool_alloc(sc); 462 if (error) { 463 re_jpool_free(sc); 464 #ifdef RE_JUMBO 465 /* Disable jumbo frame support */ 466 sc->re_maxmtu = ETHERMTU; 467 #endif 468 } 469 } 470 return(0); 471 } 472 473 static void 474 re_freebufmem(struct re_softc *sc, int tx_cnt, int rx_cnt) 475 { 476 int i; 477 478 /* Destroy all the RX and TX buffer maps */ 479 if (sc->re_ldata.re_tx_mtag) { 480 for (i = 0; i < tx_cnt; i++) { 481 bus_dmamap_destroy(sc->re_ldata.re_tx_mtag, 482 sc->re_ldata.re_tx_dmamap[i]); 483 } 484 bus_dma_tag_destroy(sc->re_ldata.re_tx_mtag); 485 sc->re_ldata.re_tx_mtag = NULL; 486 } 487 488 if (sc->re_ldata.re_rx_mtag) { 489 for (i = 0; i < rx_cnt; i++) { 490 bus_dmamap_destroy(sc->re_ldata.re_rx_mtag, 491 sc->re_ldata.re_rx_dmamap[i]); 492 } 493 bus_dmamap_destroy(sc->re_ldata.re_rx_mtag, 494 sc->re_ldata.re_rx_spare); 495 bus_dma_tag_destroy(sc->re_ldata.re_rx_mtag); 496 sc->re_ldata.re_rx_mtag = NULL; 497 } 498 } 499 500 static void 501 re_freemem(device_t dev) 502 { 503 struct re_softc *sc = device_get_softc(dev); 504 505 /* Unload and free the RX DMA ring memory and map */ 506 if (sc->re_ldata.re_rx_list_tag) { 507 bus_dmamap_unload(sc->re_ldata.re_rx_list_tag, 508 sc->re_ldata.re_rx_list_map); 509 bus_dmamem_free(sc->re_ldata.re_rx_list_tag, 510 sc->re_ldata.re_rx_list, 511 sc->re_ldata.re_rx_list_map); 512 bus_dma_tag_destroy(sc->re_ldata.re_rx_list_tag); 513 } 514 515 /* Unload and free the TX DMA ring memory and map */ 516 if (sc->re_ldata.re_tx_list_tag) { 517 bus_dmamap_unload(sc->re_ldata.re_tx_list_tag, 518 sc->re_ldata.re_tx_list_map); 519 bus_dmamem_free(sc->re_ldata.re_tx_list_tag, 520 sc->re_ldata.re_tx_list, 521 sc->re_ldata.re_tx_list_map); 522 bus_dma_tag_destroy(sc->re_ldata.re_tx_list_tag); 523 } 524 525 /* Free RX/TX buf DMA stuffs */ 526 re_freebufmem(sc, sc->re_tx_desc_cnt, sc->re_rx_desc_cnt); 527 528 /* Unload and free the stats buffer and map */ 529 if (sc->re_ldata.re_stag) { 530 bus_dmamap_unload(sc->re_ldata.re_stag, sc->re_ldata.re_smap); 531 bus_dmamem_free(sc->re_ldata.re_stag, 532 sc->re_ldata.re_stats, 533 sc->re_ldata.re_smap); 534 bus_dma_tag_destroy(sc->re_ldata.re_stag); 535 } 536 537 if (sc->re_caps & RE_C_CONTIGRX) 538 re_jpool_free(sc); 539 540 if (sc->re_parent_tag) 541 bus_dma_tag_destroy(sc->re_parent_tag); 542 543 if (sc->re_ldata.re_tx_mbuf != NULL) 544 kfree(sc->re_ldata.re_tx_mbuf, M_DEVBUF); 545 if (sc->re_ldata.re_rx_mbuf != NULL) 546 kfree(sc->re_ldata.re_rx_mbuf, M_DEVBUF); 547 if (sc->re_ldata.re_rx_paddr != NULL) 548 kfree(sc->re_ldata.re_rx_paddr, M_DEVBUF); 549 if (sc->re_ldata.re_tx_dmamap != NULL) 550 kfree(sc->re_ldata.re_tx_dmamap, M_DEVBUF); 551 if (sc->re_ldata.re_rx_dmamap != NULL) 552 kfree(sc->re_ldata.re_rx_dmamap, M_DEVBUF); 553 } 554 555 static boolean_t 556 re_is_faste(struct re_softc *sc) 557 { 558 if (pci_get_vendor(sc->dev) == PCI_VENDOR_REALTEK) { 559 switch (sc->re_device_id) { 560 case PCI_PRODUCT_REALTEK_RT8169: 561 case PCI_PRODUCT_REALTEK_RT8169SC: 562 case PCI_PRODUCT_REALTEK_RT8168: 563 case PCI_PRODUCT_REALTEK_RT8168_1: 564 case PCI_PRODUCT_REALTEK_RT8125: 565 return FALSE; 566 default: 567 return TRUE; 568 } 569 } else { 570 return FALSE; 571 } 572 } 573 574 static bool 575 re_is_2500e(const struct re_softc *sc) 576 { 577 if (pci_get_vendor(sc->dev) == PCI_VENDOR_REALTEK) { 578 switch (sc->re_device_id) { 579 case PCI_PRODUCT_REALTEK_RT8125: 580 return true; 581 582 default: 583 return false; 584 } 585 } 586 return false; 587 } 588 589 /* 590 * Attach the interface. Allocate softc structures, do ifmedia 591 * setup and ethernet/BPF attach. 592 */ 593 static int 594 re_attach(device_t dev) 595 { 596 struct re_softc *sc = device_get_softc(dev); 597 struct ifnet *ifp; 598 struct sysctl_ctx_list *ctx; 599 struct sysctl_oid *tree; 600 uint8_t eaddr[ETHER_ADDR_LEN]; 601 int error = 0, qlen, msi_enable; 602 u_int irq_flags; 603 604 callout_init_mp(&sc->re_timer); 605 sc->dev = dev; 606 sc->re_device_id = pci_get_device(dev); 607 sc->re_unit = device_get_unit(dev); 608 ifmedia_init(&sc->media, IFM_IMASK, rtl_ifmedia_upd, rtl_ifmedia_sts); 609 610 if (pci_get_vendor(dev) == PCI_VENDOR_REALTEK && 611 sc->re_device_id == PCI_PRODUCT_REALTEK_RT8125) { 612 sc->re_start_xmit = re_start_xmit_8125; 613 sc->re_write_imr = re_write_imr_8125; 614 sc->re_write_isr = re_write_isr_8125; 615 sc->re_read_isr = re_read_isr_8125; 616 } else { 617 sc->re_start_xmit = re_start_xmit; 618 sc->re_write_imr = re_write_imr; 619 sc->re_write_isr = re_write_isr; 620 sc->re_read_isr = re_read_isr; 621 } 622 623 sc->re_caps = RE_C_HWIM; 624 625 sc->re_rx_desc_cnt = re_rx_desc_count; 626 if (sc->re_rx_desc_cnt > RE_RX_DESC_CNT_MAX) 627 sc->re_rx_desc_cnt = RE_RX_DESC_CNT_MAX; 628 629 sc->re_tx_desc_cnt = re_tx_desc_count; 630 if (sc->re_tx_desc_cnt > RE_TX_DESC_CNT_MAX) 631 sc->re_tx_desc_cnt = RE_TX_DESC_CNT_MAX; 632 633 qlen = RE_IFQ_MAXLEN; 634 if (sc->re_tx_desc_cnt > qlen) 635 qlen = sc->re_tx_desc_cnt; 636 637 sc->re_rxbuf_size = MCLBYTES; 638 sc->re_newbuf = re_newbuf_std; 639 640 /* 641 * Hardware interrupt moderation settings. 642 * XXX does not seem correct, undocumented. 643 */ 644 sc->re_tx_time = 5; /* 125us */ 645 sc->re_rx_time = 2; /* 50us */ 646 647 /* Simulated interrupt moderation setting. */ 648 sc->re_sim_time = 150; /* 150us */ 649 650 /* Use simulated interrupt moderation by default. */ 651 sc->re_imtype = RE_IMTYPE_SIM; 652 re_config_imtype(sc, sc->re_imtype); 653 654 ctx = device_get_sysctl_ctx(dev); 655 tree = device_get_sysctl_tree(dev); 656 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 657 "rx_desc_count", CTLFLAG_RD, &sc->re_rx_desc_cnt, 658 0, "RX desc count"); 659 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 660 "tx_desc_count", CTLFLAG_RD, &sc->re_tx_desc_cnt, 661 0, "TX desc count"); 662 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "sim_time", 663 CTLTYPE_INT | CTLFLAG_RW, 664 sc, 0, re_sysctl_simtime, "I", 665 "Simulated interrupt moderation time (usec)."); 666 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "imtype", 667 CTLTYPE_INT | CTLFLAG_RW, 668 sc, 0, re_sysctl_imtype, "I", 669 "Interrupt moderation type -- " 670 "0:disable, 1:simulated, " 671 "2:hardware(if supported)"); 672 if (sc->re_caps & RE_C_HWIM) { 673 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), 674 OID_AUTO, "hw_rxtime", 675 CTLTYPE_INT | CTLFLAG_RW, 676 sc, 0, re_sysctl_rxtime, "I", 677 "Hardware interrupt moderation time " 678 "(unit: 25usec)."); 679 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), 680 OID_AUTO, "hw_txtime", 681 CTLTYPE_INT | CTLFLAG_RW, 682 sc, 0, re_sysctl_txtime, "I", 683 "Hardware interrupt moderation time " 684 "(unit: 25usec)."); 685 } 686 687 #ifndef BURN_BRIDGES 688 /* 689 * Handle power management nonsense. 690 */ 691 692 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { 693 uint32_t membase, irq; 694 695 /* Save important PCI config data. */ 696 membase = pci_read_config(dev, RE_PCI_LOMEM, 4); 697 irq = pci_read_config(dev, PCIR_INTLINE, 4); 698 699 /* Reset the power state. */ 700 device_printf(dev, "chip is in D%d power mode " 701 "-- setting to D0\n", pci_get_powerstate(dev)); 702 703 pci_set_powerstate(dev, PCI_POWERSTATE_D0); 704 705 /* Restore PCI config data. */ 706 pci_write_config(dev, RE_PCI_LOMEM, membase, 4); 707 pci_write_config(dev, PCIR_INTLINE, irq, 4); 708 } 709 #endif 710 /* 711 * Map control/status registers. 712 */ 713 pci_enable_busmaster(dev); 714 715 if (pci_is_pcie(dev)) { 716 sc->re_res_rid = PCIR_BAR(2); 717 sc->re_res_type = SYS_RES_MEMORY; 718 } else { 719 sc->re_res_rid = PCIR_BAR(0); 720 sc->re_res_type = SYS_RES_IOPORT; 721 } 722 sc->re_res = bus_alloc_resource_any(dev, sc->re_res_type, 723 &sc->re_res_rid, RF_ACTIVE); 724 if (sc->re_res == NULL) { 725 device_printf(dev, "couldn't map IO\n"); 726 error = ENXIO; 727 goto fail; 728 } 729 730 sc->re_btag = rman_get_bustag(sc->re_res); 731 sc->re_bhandle = rman_get_bushandle(sc->re_res); 732 733 error = rtl_check_mac_version(sc); 734 if (error) { 735 device_printf(dev, "check mac version failed\n"); 736 goto fail; 737 } 738 739 rtl_init_software_variable(sc); 740 if (pci_is_pcie(dev)) 741 sc->re_if_flags |= RL_FLAG_PCIE; 742 else 743 sc->re_if_flags &= ~RL_FLAG_PCIE; 744 device_printf(dev, "MAC version 0x%08x, MACFG %u%s%s%s\n", 745 (CSR_READ_4(sc, RE_TXCFG) & 0xFCF00000), sc->re_type, 746 sc->re_coalesce_tx_pkt ? ", software TX defrag" : "", 747 sc->re_pad_runt ? ", pad runt" : "", 748 sc->re_hw_enable_msi_msix ? ", support MSI" : ""); 749 750 /* 751 * Allocate interrupt 752 */ 753 if (pci_is_pcie(dev) && sc->re_hw_enable_msi_msix) 754 msi_enable = re_msi_enable; 755 else 756 msi_enable = 0; 757 sc->re_irq_type = pci_alloc_1intr(dev, msi_enable, 758 &sc->re_irq_rid, &irq_flags); 759 760 sc->re_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->re_irq_rid, 761 irq_flags); 762 if (sc->re_irq == NULL) { 763 device_printf(dev, "couldn't map interrupt\n"); 764 error = ENXIO; 765 goto fail; 766 } 767 768 /* Disable ASPM */ 769 re_disable_aspm(dev); 770 771 rtl_exit_oob(sc); 772 rtl_hw_init(sc); 773 774 /* Reset the adapter. */ 775 rtl_reset(sc); 776 777 rtl_get_hw_mac_address(sc, eaddr); 778 if (sc->re_type == MACFG_3) /* Change PCI Latency time*/ 779 pci_write_config(dev, PCIR_LATTIMER, 0x40, 1); 780 781 /* Allocate DMA stuffs */ 782 error = re_allocmem(dev); 783 if (error) 784 goto fail; 785 786 if (pci_is_pcie(dev)) { 787 sc->re_bus_speed = 125; 788 } else { 789 uint8_t cfg2; 790 791 cfg2 = CSR_READ_1(sc, RE_CFG2); 792 switch (cfg2 & RE_CFG2_PCICLK_MASK) { 793 case RE_CFG2_PCICLK_33MHZ: 794 sc->re_bus_speed = 33; 795 break; 796 case RE_CFG2_PCICLK_66MHZ: 797 sc->re_bus_speed = 66; 798 break; 799 default: 800 device_printf(dev, "unknown bus speed, assume 33MHz\n"); 801 sc->re_bus_speed = 33; 802 break; 803 } 804 } 805 device_printf(dev, "bus speed %dMHz\n", sc->re_bus_speed); 806 807 /* Enable hardware checksum if available. */ 808 sc->re_tx_cstag = 1; 809 sc->re_rx_cstag = 1; 810 811 ifp = &sc->arpcom.ac_if; 812 ifp->if_softc = sc; 813 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 814 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 815 ifp->if_ioctl = re_ioctl; 816 ifp->if_start = re_start; 817 #ifdef IFPOLL_ENABLE 818 ifp->if_npoll = re_npoll; 819 #endif 820 ifp->if_watchdog = re_watchdog; 821 ifp->if_init = re_init; 822 if (re_is_faste(sc)) 823 ifp->if_baudrate = IF_Mbps(100ULL); 824 else if (re_is_2500e(sc)) 825 ifp->if_baudrate = IF_Mbps(2500ULL); 826 else 827 ifp->if_baudrate = IF_Mbps(1000ULL); 828 ifp->if_nmbclusters = sc->re_rx_desc_cnt; 829 ifq_set_maxlen(&ifp->if_snd, qlen); 830 ifq_set_ready(&ifp->if_snd); 831 832 ifp->if_capabilities = IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING | 833 IFCAP_RXCSUM | IFCAP_TXCSUM; 834 ifp->if_capenable = ifp->if_capabilities; 835 /* NOTE: if_hwassist will be setup after the interface is up. */ 836 837 /* 838 * Call MI attach routine. 839 */ 840 ether_ifattach(ifp, eaddr, NULL); 841 842 ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->re_irq)); 843 844 rtl_phy_power_up(sc); 845 rtl_hw_phy_config(sc); 846 rtl_clrwol(sc); 847 848 /* TODO: jumbo frame */ 849 CSR_WRITE_2(sc, RE_RxMaxSize, sc->re_rxbuf_size); 850 851 #ifdef IFPOLL_ENABLE 852 ifpoll_compat_setup(&sc->re_npoll, ctx, (struct sysctl_oid *)tree, 853 device_get_unit(dev), ifp->if_serializer); 854 #endif 855 856 /* Hook interrupt last to avoid having to lock softc */ 857 error = bus_setup_intr(dev, sc->re_irq, INTR_MPSAFE | INTR_HIFREQ, 858 re_intr, sc, &sc->re_intrhand, ifp->if_serializer); 859 if (error) { 860 device_printf(dev, "couldn't set up irq\n"); 861 ether_ifdetach(ifp); 862 goto fail; 863 } 864 865 ifmedia_add(&sc->media, IFM_ETHER | IFM_10_T, 0, NULL); 866 ifmedia_add(&sc->media, IFM_ETHER | IFM_10_T | IFM_FDX, 0, NULL); 867 ifmedia_add(&sc->media, IFM_ETHER | IFM_100_TX, 0, NULL); 868 ifmedia_add(&sc->media, IFM_ETHER | IFM_100_TX | IFM_FDX, 0, NULL); 869 if (!re_is_faste(sc)) { 870 ifmedia_add(&sc->media, IFM_ETHER | IFM_1000_T | IFM_FDX, 871 0, NULL); 872 } 873 if (re_is_2500e(sc)) { 874 #ifndef IFM_2500_T 875 ifmedia_add(&sc->media, IFM_ETHER | IFM_2500_SX | IFM_FDX, 876 0, NULL); 877 #else 878 ifmedia_add(&sc->media, IFM_ETHER | IFM_2500_T | IFM_FDX, 879 0, NULL); 880 #endif 881 } 882 ifmedia_add(&sc->media, IFM_ETHER | IFM_AUTO, 0, NULL); 883 ifmedia_set(&sc->media, IFM_ETHER | IFM_AUTO); 884 rtl_ifmedia_upd(ifp); 885 886 fail: 887 if (error) 888 re_detach(dev); 889 890 return (error); 891 } 892 893 /* 894 * Shutdown hardware and free up resources. This can be called any 895 * time after the mutex has been initialized. It is called in both 896 * the error case in attach and the normal detach case so it needs 897 * to be careful about only freeing resources that have actually been 898 * allocated. 899 */ 900 static int 901 re_detach(device_t dev) 902 { 903 struct re_softc *sc = device_get_softc(dev); 904 struct ifnet *ifp = &sc->arpcom.ac_if; 905 906 /* These should only be active if attach succeeded */ 907 if (device_is_attached(dev)) { 908 lwkt_serialize_enter(ifp->if_serializer); 909 re_stop(sc, TRUE); 910 bus_teardown_intr(dev, sc->re_irq, sc->re_intrhand); 911 lwkt_serialize_exit(ifp->if_serializer); 912 913 ether_ifdetach(ifp); 914 } 915 ifmedia_removeall(&sc->media); 916 917 if (sc->re_irq) 918 bus_release_resource(dev, SYS_RES_IRQ, sc->re_irq_rid, 919 sc->re_irq); 920 921 if (sc->re_irq_type == PCI_INTR_TYPE_MSI) 922 pci_release_msi(dev); 923 924 if (sc->re_res) { 925 bus_release_resource(dev, sc->re_res_type, sc->re_res_rid, 926 sc->re_res); 927 } 928 rtl_cmac_unmap(sc); 929 930 /* Free DMA stuffs */ 931 re_freemem(dev); 932 933 return(0); 934 } 935 936 static void 937 re_setup_rxdesc(struct re_softc *sc, int idx) 938 { 939 bus_addr_t paddr; 940 uint32_t cmdstat; 941 struct re_desc *d; 942 943 paddr = sc->re_ldata.re_rx_paddr[idx]; 944 d = &sc->re_ldata.re_rx_list[idx]; 945 946 d->re_bufaddr_lo = htole32(RE_ADDR_LO(paddr)); 947 d->re_bufaddr_hi = htole32(RE_ADDR_HI(paddr)); 948 949 cmdstat = sc->re_rxbuf_size | RE_RDESC_CMD_OWN; 950 if (idx == (sc->re_rx_desc_cnt - 1)) 951 cmdstat |= RE_RDESC_CMD_EOR; 952 d->re_cmdstat = htole32(cmdstat); 953 } 954 955 static int 956 re_newbuf_std(struct re_softc *sc, int idx, int init) 957 { 958 bus_dma_segment_t seg; 959 bus_dmamap_t map; 960 struct mbuf *m; 961 int error, nsegs; 962 963 m = m_getcl(init ? M_WAITOK : M_NOWAIT, MT_DATA, M_PKTHDR); 964 if (m == NULL) { 965 error = ENOBUFS; 966 967 if (init) { 968 if_printf(&sc->arpcom.ac_if, "m_getcl failed\n"); 969 return error; 970 } else { 971 goto back; 972 } 973 } 974 m->m_len = m->m_pkthdr.len = MCLBYTES; 975 976 /* 977 * NOTE: 978 * re(4) chips need address of the receive buffer to be 8-byte 979 * aligned, so don't call m_adj(m, ETHER_ALIGN) here. 980 */ 981 982 error = bus_dmamap_load_mbuf_segment(sc->re_ldata.re_rx_mtag, 983 sc->re_ldata.re_rx_spare, m, 984 &seg, 1, &nsegs, BUS_DMA_NOWAIT); 985 if (error) { 986 m_freem(m); 987 if (init) { 988 if_printf(&sc->arpcom.ac_if, "can't load RX mbuf\n"); 989 return error; 990 } else { 991 goto back; 992 } 993 } 994 995 if (!init) { 996 bus_dmamap_sync(sc->re_ldata.re_rx_mtag, 997 sc->re_ldata.re_rx_dmamap[idx], 998 BUS_DMASYNC_POSTREAD); 999 bus_dmamap_unload(sc->re_ldata.re_rx_mtag, 1000 sc->re_ldata.re_rx_dmamap[idx]); 1001 } 1002 sc->re_ldata.re_rx_mbuf[idx] = m; 1003 sc->re_ldata.re_rx_paddr[idx] = seg.ds_addr; 1004 1005 map = sc->re_ldata.re_rx_dmamap[idx]; 1006 sc->re_ldata.re_rx_dmamap[idx] = sc->re_ldata.re_rx_spare; 1007 sc->re_ldata.re_rx_spare = map; 1008 back: 1009 re_setup_rxdesc(sc, idx); 1010 return error; 1011 } 1012 1013 #ifdef RE_JUMBO 1014 static int 1015 re_newbuf_jumbo(struct re_softc *sc, int idx, int init) 1016 { 1017 struct mbuf *m; 1018 struct re_jbuf *jbuf; 1019 int error = 0; 1020 1021 MGETHDR(m, init ? M_WAITOK : M_NOWAIT, MT_DATA); 1022 if (m == NULL) { 1023 error = ENOBUFS; 1024 if (init) { 1025 if_printf(&sc->arpcom.ac_if, "MGETHDR failed\n"); 1026 return error; 1027 } else { 1028 goto back; 1029 } 1030 } 1031 1032 jbuf = re_jbuf_alloc(sc); 1033 if (jbuf == NULL) { 1034 m_freem(m); 1035 1036 error = ENOBUFS; 1037 if (init) { 1038 if_printf(&sc->arpcom.ac_if, "jpool is empty\n"); 1039 return error; 1040 } else { 1041 goto back; 1042 } 1043 } 1044 1045 m->m_ext.ext_arg = jbuf; 1046 m->m_ext.ext_buf = jbuf->re_buf; 1047 m->m_ext.ext_free = re_jbuf_free; 1048 m->m_ext.ext_ref = re_jbuf_ref; 1049 m->m_ext.ext_size = sc->re_rxbuf_size; 1050 1051 m->m_data = m->m_ext.ext_buf; 1052 m->m_flags |= M_EXT; 1053 m->m_len = m->m_pkthdr.len = m->m_ext.ext_size; 1054 1055 /* 1056 * NOTE: 1057 * Some re(4) chips(e.g. RTL8101E) need address of the receive buffer 1058 * to be 8-byte aligned, so don't call m_adj(m, ETHER_ALIGN) here. 1059 */ 1060 1061 sc->re_ldata.re_rx_mbuf[idx] = m; 1062 sc->re_ldata.re_rx_paddr[idx] = jbuf->re_paddr; 1063 back: 1064 re_setup_rxdesc(sc, idx); 1065 return error; 1066 } 1067 #endif /* RE_JUMBO */ 1068 1069 static int 1070 re_tx_list_init(struct re_softc *sc) 1071 { 1072 bzero(sc->re_ldata.re_tx_list, RE_TX_LIST_SZ(sc)); 1073 1074 sc->re_ldata.re_tx_prodidx = 0; 1075 sc->re_ldata.re_tx_considx = 0; 1076 sc->re_ldata.re_tx_free = sc->re_tx_desc_cnt; 1077 1078 return(0); 1079 } 1080 1081 static int 1082 re_rx_list_init(struct re_softc *sc) 1083 { 1084 int i, error; 1085 1086 bzero(sc->re_ldata.re_rx_list, RE_RX_LIST_SZ(sc)); 1087 1088 for (i = 0; i < sc->re_rx_desc_cnt; i++) { 1089 error = sc->re_newbuf(sc, i, 1); 1090 if (error) 1091 return(error); 1092 } 1093 1094 sc->re_ldata.re_rx_prodidx = 0; 1095 sc->re_head = sc->re_tail = NULL; 1096 1097 return(0); 1098 } 1099 1100 #define RE_IP4_PACKET 0x1 1101 #define RE_TCP_PACKET 0x2 1102 #define RE_UDP_PACKET 0x4 1103 1104 static __inline uint8_t 1105 re_packet_type(struct re_softc *sc, uint32_t rxstat, uint32_t rxctrl) 1106 { 1107 uint8_t packet_type = 0; 1108 1109 if (sc->re_if_flags & RL_FLAG_DESCV2) { 1110 if (rxctrl & RE_RDESC_CTL_PROTOIP4) 1111 packet_type |= RE_IP4_PACKET; 1112 } else { 1113 if (rxstat & RE_RDESC_STAT_PROTOID) 1114 packet_type |= RE_IP4_PACKET; 1115 } 1116 if (RE_TCPPKT(rxstat)) 1117 packet_type |= RE_TCP_PACKET; 1118 else if (RE_UDPPKT(rxstat)) 1119 packet_type |= RE_UDP_PACKET; 1120 return packet_type; 1121 } 1122 1123 /* 1124 * RX handler for C+ and 8169. For the gigE chips, we support 1125 * the reception of jumbo frames that have been fragmented 1126 * across multiple 2K mbuf cluster buffers. 1127 */ 1128 static int 1129 re_rxeof(struct re_softc *sc) 1130 { 1131 struct ifnet *ifp = &sc->arpcom.ac_if; 1132 struct mbuf *m; 1133 struct re_desc *cur_rx; 1134 uint32_t rxstat, rxctrl; 1135 int i, total_len, rx = 0; 1136 1137 for (i = sc->re_ldata.re_rx_prodidx; 1138 RE_OWN(&sc->re_ldata.re_rx_list[i]) == 0; RE_RXDESC_INC(sc, i)) { 1139 cur_rx = &sc->re_ldata.re_rx_list[i]; 1140 m = sc->re_ldata.re_rx_mbuf[i]; 1141 total_len = RE_RXBYTES(cur_rx); 1142 rxstat = le32toh(cur_rx->re_cmdstat); 1143 rxctrl = le32toh(cur_rx->re_control); 1144 1145 rx = 1; 1146 1147 #ifdef INVARIANTS 1148 if (sc->re_flags & RE_F_USE_JPOOL) 1149 KKASSERT(rxstat & RE_RDESC_STAT_EOF); 1150 #endif 1151 1152 if ((rxstat & RE_RDESC_STAT_EOF) == 0) { 1153 if (sc->re_flags & RE_F_DROP_RXFRAG) { 1154 re_setup_rxdesc(sc, i); 1155 continue; 1156 } 1157 1158 if (sc->re_newbuf(sc, i, 0)) { 1159 /* Drop upcoming fragments */ 1160 sc->re_flags |= RE_F_DROP_RXFRAG; 1161 continue; 1162 } 1163 1164 m->m_len = MCLBYTES; 1165 if (sc->re_head == NULL) { 1166 sc->re_head = sc->re_tail = m; 1167 } else { 1168 sc->re_tail->m_next = m; 1169 sc->re_tail = m; 1170 } 1171 continue; 1172 } else if (sc->re_flags & RE_F_DROP_RXFRAG) { 1173 /* 1174 * Last fragment of a multi-fragment packet. 1175 * 1176 * Since error already happened, this fragment 1177 * must be dropped as well as the fragment chain. 1178 */ 1179 re_setup_rxdesc(sc, i); 1180 re_free_rxchain(sc); 1181 sc->re_flags &= ~RE_F_DROP_RXFRAG; 1182 continue; 1183 } 1184 1185 rxstat >>= 1; 1186 if (rxstat & RE_RDESC_STAT_RXERRSUM) { 1187 IFNET_STAT_INC(ifp, ierrors, 1); 1188 /* 1189 * If this is part of a multi-fragment packet, 1190 * discard all the pieces. 1191 */ 1192 re_free_rxchain(sc); 1193 re_setup_rxdesc(sc, i); 1194 continue; 1195 } 1196 1197 /* 1198 * If allocating a replacement mbuf fails, 1199 * reload the current one. 1200 */ 1201 1202 if (sc->re_newbuf(sc, i, 0)) { 1203 IFNET_STAT_INC(ifp, ierrors, 1); 1204 continue; 1205 } 1206 1207 if (sc->re_head != NULL) { 1208 m->m_len = total_len % MCLBYTES; 1209 /* 1210 * Special case: if there's 4 bytes or less 1211 * in this buffer, the mbuf can be discarded: 1212 * the last 4 bytes is the CRC, which we don't 1213 * care about anyway. 1214 */ 1215 if (m->m_len <= ETHER_CRC_LEN) { 1216 sc->re_tail->m_len -= 1217 (ETHER_CRC_LEN - m->m_len); 1218 m_freem(m); 1219 } else { 1220 m->m_len -= ETHER_CRC_LEN; 1221 sc->re_tail->m_next = m; 1222 } 1223 m = sc->re_head; 1224 sc->re_head = sc->re_tail = NULL; 1225 m->m_pkthdr.len = total_len - ETHER_CRC_LEN; 1226 } else { 1227 m->m_pkthdr.len = m->m_len = 1228 (total_len - ETHER_CRC_LEN); 1229 } 1230 1231 IFNET_STAT_INC(ifp, ipackets, 1); 1232 m->m_pkthdr.rcvif = ifp; 1233 1234 /* Do RX checksumming if enabled */ 1235 1236 if (ifp->if_capenable & IFCAP_RXCSUM) { 1237 uint8_t packet_type; 1238 1239 packet_type = re_packet_type(sc, rxstat, rxctrl); 1240 1241 /* Check IP header checksum */ 1242 if (packet_type & RE_IP4_PACKET) { 1243 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 1244 if ((rxstat & RE_RDESC_STAT_IPSUMBAD) == 0) 1245 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 1246 } 1247 1248 /* Check TCP/UDP checksum */ 1249 if (((packet_type & RE_TCP_PACKET) && 1250 (rxstat & RE_RDESC_STAT_TCPSUMBAD) == 0) || 1251 ((packet_type & RE_UDP_PACKET) && 1252 (rxstat & RE_RDESC_STAT_UDPSUMBAD) == 0)) { 1253 m->m_pkthdr.csum_flags |= 1254 CSUM_DATA_VALID|CSUM_PSEUDO_HDR| 1255 CSUM_FRAG_NOT_CHECKED; 1256 m->m_pkthdr.csum_data = 0xffff; 1257 } 1258 } 1259 1260 if (rxctrl & RE_RDESC_CTL_HASTAG) { 1261 m->m_flags |= M_VLANTAG; 1262 m->m_pkthdr.ether_vlantag = 1263 be16toh((rxctrl & RE_RDESC_CTL_TAGDATA)); 1264 } 1265 ifp->if_input(ifp, m, NULL, -1); 1266 } 1267 1268 sc->re_ldata.re_rx_prodidx = i; 1269 1270 return rx; 1271 } 1272 1273 #undef RE_IP4_PACKET 1274 #undef RE_TCP_PACKET 1275 #undef RE_UDP_PACKET 1276 1277 static int 1278 re_tx_collect(struct re_softc *sc) 1279 { 1280 struct ifnet *ifp = &sc->arpcom.ac_if; 1281 uint32_t txstat; 1282 int idx, tx = 0; 1283 1284 for (idx = sc->re_ldata.re_tx_considx; 1285 sc->re_ldata.re_tx_free < sc->re_tx_desc_cnt; 1286 RE_TXDESC_INC(sc, idx)) { 1287 txstat = le32toh(sc->re_ldata.re_tx_list[idx].re_cmdstat); 1288 if (txstat & RE_TDESC_CMD_OWN) 1289 break; 1290 1291 tx = 1; 1292 1293 sc->re_ldata.re_tx_list[idx].re_bufaddr_lo = 0; 1294 1295 /* 1296 * We only stash mbufs in the last descriptor 1297 * in a fragment chain, which also happens to 1298 * be the only place where the TX status bits 1299 * are valid. 1300 * 1301 * NOTE: 1302 * On 8125, RE_TDESC_CMD_EOF is no longer left 1303 * uncleared. 1304 */ 1305 if (sc->re_ldata.re_tx_mbuf[idx] != NULL) { 1306 bus_dmamap_unload(sc->re_ldata.re_tx_mtag, 1307 sc->re_ldata.re_tx_dmamap[idx]); 1308 m_freem(sc->re_ldata.re_tx_mbuf[idx]); 1309 sc->re_ldata.re_tx_mbuf[idx] = NULL; 1310 if (txstat & (RE_TDESC_STAT_EXCESSCOL| 1311 RE_TDESC_STAT_COLCNT)) 1312 IFNET_STAT_INC(ifp, collisions, 1); 1313 if (txstat & RE_TDESC_STAT_TXERRSUM) 1314 IFNET_STAT_INC(ifp, oerrors, 1); 1315 else 1316 IFNET_STAT_INC(ifp, opackets, 1); 1317 } 1318 sc->re_ldata.re_tx_free++; 1319 } 1320 sc->re_ldata.re_tx_considx = idx; 1321 1322 return tx; 1323 } 1324 1325 static int 1326 re_txeof(struct re_softc *sc) 1327 { 1328 struct ifnet *ifp = &sc->arpcom.ac_if; 1329 int tx; 1330 1331 tx = re_tx_collect(sc); 1332 1333 /* There is enough free TX descs */ 1334 if (sc->re_ldata.re_tx_free > RE_TXDESC_SPARE) 1335 ifq_clr_oactive(&ifp->if_snd); 1336 1337 /* 1338 * Some chips will ignore a second TX request issued while an 1339 * existing transmission is in progress. If the transmitter goes 1340 * idle but there are still packets waiting to be sent, we need 1341 * to restart the channel here to flush them out. This only seems 1342 * to be required with the PCIe devices. 1343 */ 1344 if (sc->re_ldata.re_tx_free < sc->re_tx_desc_cnt) 1345 sc->re_start_xmit(sc); 1346 else 1347 ifp->if_timer = 0; 1348 1349 return tx; 1350 } 1351 1352 static void 1353 re_tick(void *xsc) 1354 { 1355 struct re_softc *sc = xsc; 1356 1357 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1358 re_tick_serialized(xsc); 1359 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1360 } 1361 1362 static void 1363 re_tick_serialized(void *xsc) 1364 { 1365 struct re_softc *sc = xsc; 1366 struct ifnet *ifp = &sc->arpcom.ac_if; 1367 1368 ASSERT_SERIALIZED(ifp->if_serializer); 1369 1370 if ((ifp->if_flags & IFF_RUNNING) == 0) 1371 return; 1372 1373 if (rtl_link_ok(sc)) { 1374 if ((sc->re_flags & RE_F_LINKED) == 0) 1375 re_link_up(sc); 1376 } else if (sc->re_flags & RE_F_LINKED) { 1377 re_link_down(sc); 1378 } 1379 callout_reset(&sc->re_timer, hz, re_tick, sc); 1380 } 1381 1382 #ifdef IFPOLL_ENABLE 1383 1384 static void 1385 re_npoll_compat(struct ifnet *ifp, void *arg __unused, int count) 1386 { 1387 struct re_softc *sc = ifp->if_softc; 1388 1389 ASSERT_SERIALIZED(ifp->if_serializer); 1390 1391 if (sc->re_npoll.ifpc_stcount-- == 0) { 1392 uint32_t status; 1393 1394 sc->re_npoll.ifpc_stcount = sc->re_npoll.ifpc_stfrac; 1395 1396 status = sc->re_read_isr(sc); 1397 if (status) 1398 sc->re_write_isr(sc, status); 1399 1400 /* 1401 * XXX check behaviour on receiver stalls. 1402 */ 1403 1404 if (status & RE_ISR_SYSTEM_ERR) { 1405 rtl_reset(sc); 1406 re_init(sc); 1407 /* Done! */ 1408 return; 1409 } 1410 } 1411 1412 sc->rxcycles = count; 1413 re_rxeof(sc); 1414 re_txeof(sc); 1415 1416 if (!ifq_is_empty(&ifp->if_snd)) 1417 if_devstart(ifp); 1418 } 1419 1420 static void 1421 re_npoll(struct ifnet *ifp, struct ifpoll_info *info) 1422 { 1423 struct re_softc *sc = ifp->if_softc; 1424 1425 ASSERT_SERIALIZED(ifp->if_serializer); 1426 1427 if (info != NULL) { 1428 int cpuid = sc->re_npoll.ifpc_cpuid; 1429 1430 info->ifpi_rx[cpuid].poll_func = re_npoll_compat; 1431 info->ifpi_rx[cpuid].arg = NULL; 1432 info->ifpi_rx[cpuid].serializer = ifp->if_serializer; 1433 1434 if (ifp->if_flags & IFF_RUNNING) 1435 re_setup_intr(sc, 0, RE_IMTYPE_NONE); 1436 ifq_set_cpuid(&ifp->if_snd, cpuid); 1437 } else { 1438 if (ifp->if_flags & IFF_RUNNING) 1439 re_setup_intr(sc, 1, sc->re_imtype); 1440 ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->re_irq)); 1441 } 1442 } 1443 #endif /* IFPOLL_ENABLE */ 1444 1445 static void 1446 re_intr(void *arg) 1447 { 1448 struct re_softc *sc = arg; 1449 struct ifnet *ifp = &sc->arpcom.ac_if; 1450 uint32_t status; 1451 int proc; 1452 1453 ASSERT_SERIALIZED(ifp->if_serializer); 1454 1455 if ((sc->re_flags & RE_F_SUSPENDED) || 1456 (ifp->if_flags & IFF_RUNNING) == 0) 1457 return; 1458 1459 /* Disable interrupts. */ 1460 sc->re_write_imr(sc, 0); 1461 1462 status = sc->re_read_isr(sc); 1463 again: 1464 proc = 0; 1465 if (status) 1466 sc->re_write_isr(sc, status); 1467 if (status & sc->re_intrs) { 1468 if (status & RE_ISR_SYSTEM_ERR) { 1469 rtl_reset(sc); 1470 re_init(sc); 1471 /* Done! */ 1472 return; 1473 } 1474 proc |= re_rxeof(sc); 1475 proc |= re_txeof(sc); 1476 } 1477 1478 if (sc->re_imtype == RE_IMTYPE_SIM) { 1479 if ((sc->re_flags & RE_F_TIMER_INTR)) { 1480 if (!proc) { 1481 /* 1482 * Nothing needs to be processed, fallback 1483 * to use TX/RX interrupts. 1484 * 1485 * NOTE: This will re-enable interrupts. 1486 */ 1487 re_setup_intr(sc, 1, RE_IMTYPE_NONE); 1488 1489 /* 1490 * Recollect, mainly to avoid the possible 1491 * race introduced by changing interrupt 1492 * masks. 1493 */ 1494 re_rxeof(sc); 1495 re_txeof(sc); 1496 } else { 1497 /* Re-enable interrupts. */ 1498 sc->re_write_imr(sc, sc->re_intrs); 1499 CSR_WRITE_4(sc, RE_TIMERCNT, 1); /* reload */ 1500 } 1501 } else if (proc) { 1502 /* 1503 * Assume that using simulated interrupt moderation 1504 * (hardware timer based) could reduce the interript 1505 * rate. 1506 * 1507 * NOTE: This will re-enable interrupts. 1508 */ 1509 re_setup_intr(sc, 1, RE_IMTYPE_SIM); 1510 } else { 1511 /* Re-enable interrupts. */ 1512 sc->re_write_imr(sc, sc->re_intrs); 1513 } 1514 } else { 1515 status = sc->re_read_isr(sc); 1516 if (status & sc->re_intrs) { 1517 if (!ifq_is_empty(&ifp->if_snd)) 1518 if_devstart(ifp); 1519 /* NOTE: Interrupts are still disabled. */ 1520 goto again; 1521 } 1522 /* Re-enable interrupts. */ 1523 sc->re_write_imr(sc, sc->re_intrs); 1524 } 1525 1526 if (!ifq_is_empty(&ifp->if_snd)) 1527 if_devstart(ifp); 1528 } 1529 1530 static int 1531 re_encap(struct re_softc *sc, struct mbuf **m_head, int *idx0) 1532 { 1533 struct mbuf *m = *m_head; 1534 bus_dma_segment_t segs[RE_MAXSEGS]; 1535 bus_dmamap_t map; 1536 int error, maxsegs, idx, i, nsegs; 1537 struct re_desc *d, *tx_ring; 1538 uint32_t cmd_csum, ctl_csum, vlantag; 1539 1540 KASSERT(sc->re_ldata.re_tx_free > RE_TXDESC_SPARE, 1541 ("not enough free TX desc")); 1542 1543 if (sc->re_coalesce_tx_pkt && m->m_pkthdr.len != m->m_len) { 1544 struct mbuf *m_new; 1545 1546 m_new = m_defrag(m, M_NOWAIT); 1547 if (m_new == NULL) { 1548 error = ENOBUFS; 1549 goto back; 1550 } else { 1551 *m_head = m = m_new; 1552 if (m->m_pkthdr.len != m->m_len) { 1553 /* Still not configuous; give up. */ 1554 error = ENOBUFS; 1555 goto back; 1556 } 1557 } 1558 } 1559 1560 map = sc->re_ldata.re_tx_dmamap[*idx0]; 1561 1562 /* 1563 * Set up checksum offload. Note: checksum offload bits must 1564 * appear in all descriptors of a multi-descriptor transmit 1565 * attempt. (This is according to testing done with an 8169 1566 * chip. I'm not sure if this is a requirement or a bug.) 1567 */ 1568 cmd_csum = ctl_csum = 0; 1569 if (m->m_pkthdr.csum_flags & CSUM_IP) { 1570 cmd_csum |= RE_TDESC_CMD_IPCSUM; 1571 ctl_csum |= RE_TDESC_CTL_IPCSUM; 1572 } 1573 if (m->m_pkthdr.csum_flags & CSUM_TCP) { 1574 cmd_csum |= RE_TDESC_CMD_TCPCSUM; 1575 ctl_csum |= RE_TDESC_CTL_TCPCSUM; 1576 } 1577 if (m->m_pkthdr.csum_flags & CSUM_UDP) { 1578 cmd_csum |= RE_TDESC_CMD_UDPCSUM; 1579 ctl_csum |= RE_TDESC_CTL_UDPCSUM; 1580 } 1581 1582 /* For version2 descriptor, csum flags are set on re_control */ 1583 if (sc->re_if_flags & RL_FLAG_DESCV2) 1584 cmd_csum = 0; 1585 else 1586 ctl_csum = 0; 1587 1588 if (sc->re_pad_runt) { 1589 /* 1590 * With some of the RealTek chips, using the checksum offload 1591 * support in conjunction with the autopadding feature results 1592 * in the transmission of corrupt frames. For example, if we 1593 * need to send a really small IP fragment that's less than 60 1594 * bytes in size, and IP header checksumming is enabled, the 1595 * resulting ethernet frame that appears on the wire will 1596 * have garbled payload. To work around this, if TX checksum 1597 * offload is enabled, we always manually pad short frames out 1598 * to the minimum ethernet frame size. 1599 * 1600 * Note: this appears unnecessary for TCP, and doing it for TCP 1601 * with PCIe adapters seems to result in bad checksums. 1602 */ 1603 if ((m->m_pkthdr.csum_flags & 1604 (CSUM_DELAY_IP | CSUM_DELAY_DATA)) && 1605 (m->m_pkthdr.csum_flags & CSUM_TCP) == 0 && 1606 m->m_pkthdr.len < RE_MIN_FRAMELEN) { 1607 error = m_devpad(m, RE_MIN_FRAMELEN); 1608 if (error) 1609 goto back; 1610 } 1611 } 1612 1613 vlantag = 0; 1614 if (m->m_flags & M_VLANTAG) { 1615 vlantag = htobe16(m->m_pkthdr.ether_vlantag) | 1616 RE_TDESC_CTL_INSTAG; 1617 } 1618 1619 maxsegs = sc->re_ldata.re_tx_free; 1620 if (maxsegs > RE_MAXSEGS) 1621 maxsegs = RE_MAXSEGS; 1622 1623 error = bus_dmamap_load_mbuf_defrag(sc->re_ldata.re_tx_mtag, map, 1624 m_head, segs, maxsegs, &nsegs, BUS_DMA_NOWAIT); 1625 if (error) 1626 goto back; 1627 1628 m = *m_head; 1629 bus_dmamap_sync(sc->re_ldata.re_tx_mtag, map, BUS_DMASYNC_PREWRITE); 1630 1631 /* 1632 * Map the segment array into descriptors. We also keep track 1633 * of the end of the ring and set the end-of-ring bits as needed, 1634 * and we set the ownership bits in all except the very first 1635 * descriptor, whose ownership bits will be turned on later. 1636 */ 1637 tx_ring = sc->re_ldata.re_tx_list; 1638 idx = *idx0; 1639 i = 0; 1640 for (;;) { 1641 uint32_t cmdstat; 1642 1643 d = &tx_ring[idx]; 1644 1645 KKASSERT(sc->re_ldata.re_tx_mbuf[idx] == NULL); 1646 1647 d->re_bufaddr_lo = htole32(RE_ADDR_LO(segs[i].ds_addr)); 1648 d->re_bufaddr_hi = htole32(RE_ADDR_HI(segs[i].ds_addr)); 1649 1650 cmdstat = segs[i].ds_len; 1651 if (i == 0) { 1652 cmdstat |= RE_TDESC_CMD_SOF; 1653 } else if (i != nsegs - 1) { 1654 /* 1655 * Last descriptor's ownership will be transfered 1656 * later. 1657 */ 1658 cmdstat |= RE_TDESC_CMD_OWN; 1659 } 1660 if (idx == (sc->re_tx_desc_cnt - 1)) 1661 cmdstat |= RE_TDESC_CMD_EOR; 1662 1663 d->re_control = htole32(ctl_csum | vlantag); 1664 d->re_cmdstat = htole32(cmdstat | cmd_csum); 1665 1666 i++; 1667 if (i == nsegs) 1668 break; 1669 RE_TXDESC_INC(sc, idx); 1670 } 1671 d->re_cmdstat |= htole32(RE_TDESC_CMD_EOF); 1672 1673 /* Transfer ownership of packet to the chip. */ 1674 d->re_cmdstat |= htole32(RE_TDESC_CMD_OWN); 1675 if (*idx0 != idx) 1676 tx_ring[*idx0].re_cmdstat |= htole32(RE_TDESC_CMD_OWN); 1677 1678 /* 1679 * Insure that the map for this transmission 1680 * is placed at the array index of the last descriptor 1681 * in this chain. 1682 */ 1683 sc->re_ldata.re_tx_dmamap[*idx0] = sc->re_ldata.re_tx_dmamap[idx]; 1684 sc->re_ldata.re_tx_dmamap[idx] = map; 1685 1686 sc->re_ldata.re_tx_mbuf[idx] = m; 1687 sc->re_ldata.re_tx_free -= nsegs; 1688 1689 RE_TXDESC_INC(sc, idx); 1690 *idx0 = idx; 1691 back: 1692 if (error) { 1693 m_freem(*m_head); 1694 *m_head = NULL; 1695 } 1696 return error; 1697 } 1698 1699 /* 1700 * Main transmit routine for C+ and gigE NICs. 1701 */ 1702 1703 static void 1704 re_start(struct ifnet *ifp, struct ifaltq_subque *ifsq) 1705 { 1706 struct re_softc *sc = ifp->if_softc; 1707 struct mbuf *m_head; 1708 int idx, need_trans, oactive, error; 1709 1710 ASSERT_ALTQ_SQ_DEFAULT(ifp, ifsq); 1711 ASSERT_SERIALIZED(ifp->if_serializer); 1712 1713 if ((sc->re_flags & RE_F_LINKED) == 0) { 1714 ifq_purge(&ifp->if_snd); 1715 return; 1716 } 1717 1718 if ((ifp->if_flags & IFF_RUNNING) == 0 || ifq_is_oactive(&ifp->if_snd)) 1719 return; 1720 1721 idx = sc->re_ldata.re_tx_prodidx; 1722 1723 need_trans = 0; 1724 oactive = 0; 1725 for (;;) { 1726 if (sc->re_ldata.re_tx_free <= RE_TXDESC_SPARE) { 1727 if (!oactive) { 1728 if (re_tx_collect(sc)) { 1729 oactive = 1; 1730 continue; 1731 } 1732 } 1733 ifq_set_oactive(&ifp->if_snd); 1734 break; 1735 } 1736 1737 m_head = ifq_dequeue(&ifp->if_snd); 1738 if (m_head == NULL) 1739 break; 1740 1741 error = re_encap(sc, &m_head, &idx); 1742 if (error) { 1743 /* m_head is freed by re_encap(), if we reach here */ 1744 IFNET_STAT_INC(ifp, oerrors, 1); 1745 1746 if (error == EFBIG && !oactive) { 1747 if (re_tx_collect(sc)) { 1748 oactive = 1; 1749 continue; 1750 } 1751 } 1752 ifq_set_oactive(&ifp->if_snd); 1753 break; 1754 } 1755 1756 oactive = 0; 1757 need_trans = 1; 1758 1759 /* 1760 * If there's a BPF listener, bounce a copy of this frame 1761 * to him. 1762 */ 1763 ETHER_BPF_MTAP(ifp, m_head); 1764 } 1765 1766 if (!need_trans) 1767 return; 1768 1769 sc->re_ldata.re_tx_prodidx = idx; 1770 1771 /* 1772 * RealTek put the TX poll request register in a different 1773 * location on the 8169 gigE chip. I don't know why. 1774 */ 1775 sc->re_start_xmit(sc); 1776 1777 /* 1778 * Set a timeout in case the chip goes out to lunch. 1779 */ 1780 ifp->if_timer = 5; 1781 } 1782 1783 static void 1784 re_link_up(struct re_softc *sc) 1785 { 1786 struct ifnet *ifp = &sc->arpcom.ac_if; 1787 int error; 1788 1789 ASSERT_SERIALIZED(ifp->if_serializer); 1790 1791 rtl_link_on_patch(sc); 1792 re_stop(sc, FALSE); 1793 rtl_set_eaddr(sc); 1794 1795 error = re_rx_list_init(sc); 1796 if (error) { 1797 re_stop(sc, TRUE); 1798 return; 1799 } 1800 error = re_tx_list_init(sc); 1801 if (error) { 1802 re_stop(sc, TRUE); 1803 return; 1804 } 1805 1806 /* 1807 * Load the addresses of the RX and TX lists into the chip. 1808 */ 1809 CSR_WRITE_4(sc, RE_RXLIST_ADDR_HI, 1810 RE_ADDR_HI(sc->re_ldata.re_rx_list_addr)); 1811 CSR_WRITE_4(sc, RE_RXLIST_ADDR_LO, 1812 RE_ADDR_LO(sc->re_ldata.re_rx_list_addr)); 1813 1814 CSR_WRITE_4(sc, RE_TXLIST_ADDR_HI, 1815 RE_ADDR_HI(sc->re_ldata.re_tx_list_addr)); 1816 CSR_WRITE_4(sc, RE_TXLIST_ADDR_LO, 1817 RE_ADDR_LO(sc->re_ldata.re_tx_list_addr)); 1818 1819 rtl_hw_start(sc); 1820 1821 #ifdef IFPOLL_ENABLE 1822 /* 1823 * Disable interrupts if we are polling. 1824 */ 1825 if (ifp->if_flags & IFF_NPOLLING) 1826 re_setup_intr(sc, 0, RE_IMTYPE_NONE); 1827 else /* otherwise ... */ 1828 #endif /* IFPOLL_ENABLE */ 1829 /* 1830 * Enable interrupts. 1831 */ 1832 re_setup_intr(sc, 1, sc->re_imtype); 1833 sc->re_write_isr(sc, sc->re_intrs); 1834 1835 sc->re_flags |= RE_F_LINKED; 1836 ifp->if_link_state = LINK_STATE_UP; 1837 if_link_state_change(ifp); 1838 1839 if (bootverbose) 1840 if_printf(ifp, "link UP\n"); 1841 1842 if (!ifq_is_empty(&ifp->if_snd)) 1843 if_devstart(ifp); 1844 } 1845 1846 static void 1847 re_link_down(struct re_softc *sc) 1848 { 1849 struct ifnet *ifp = &sc->arpcom.ac_if; 1850 1851 /* NOTE: re_stop() will reset RE_F_LINKED. */ 1852 ifp->if_link_state = LINK_STATE_DOWN; 1853 if_link_state_change(ifp); 1854 1855 re_stop(sc, FALSE); 1856 rtl_ifmedia_upd(ifp); 1857 1858 if (bootverbose) 1859 if_printf(ifp, "link DOWN\n"); 1860 } 1861 1862 static void 1863 re_init(void *xsc) 1864 { 1865 struct re_softc *sc = xsc; 1866 struct ifnet *ifp = &sc->arpcom.ac_if; 1867 1868 ASSERT_SERIALIZED(ifp->if_serializer); 1869 1870 re_stop(sc, TRUE); 1871 if (rtl_link_ok(sc)) { 1872 if (bootverbose) 1873 if_printf(ifp, "link is UP in if_init\n"); 1874 re_link_up(sc); 1875 } 1876 1877 ifp->if_flags |= IFF_RUNNING; 1878 ifq_clr_oactive(&ifp->if_snd); 1879 1880 callout_reset(&sc->re_timer, hz, re_tick, sc); 1881 } 1882 1883 static int 1884 re_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 1885 { 1886 struct re_softc *sc = ifp->if_softc; 1887 struct ifreq *ifr = (struct ifreq *)data; 1888 int error = 0, mask; 1889 1890 ASSERT_SERIALIZED(ifp->if_serializer); 1891 1892 switch(command) { 1893 case SIOCSIFMTU: 1894 #ifdef RE_JUMBO 1895 if (ifr->ifr_mtu > sc->re_maxmtu) { 1896 error = EINVAL; 1897 } else if (ifp->if_mtu != ifr->ifr_mtu) { 1898 ifp->if_mtu = ifr->ifr_mtu; 1899 if (ifp->if_flags & IFF_RUNNING) 1900 ifp->if_init(sc); 1901 } 1902 #else 1903 error = EOPNOTSUPP; 1904 #endif 1905 break; 1906 1907 case SIOCSIFFLAGS: 1908 if (ifp->if_flags & IFF_UP) { 1909 if (ifp->if_flags & IFF_RUNNING) { 1910 if ((ifp->if_flags ^ sc->re_saved_ifflags) & 1911 (IFF_PROMISC | IFF_ALLMULTI)) 1912 rtl_set_rx_packet_filter(sc); 1913 } else { 1914 re_init(sc); 1915 } 1916 } else if (ifp->if_flags & IFF_RUNNING) { 1917 re_stop(sc, TRUE); 1918 } 1919 sc->re_saved_ifflags = ifp->if_flags; 1920 break; 1921 1922 case SIOCADDMULTI: 1923 case SIOCDELMULTI: 1924 rtl_set_rx_packet_filter(sc); 1925 break; 1926 1927 case SIOCGIFMEDIA: 1928 case SIOCGIFXMEDIA: 1929 case SIOCSIFMEDIA: 1930 error = ifmedia_ioctl(ifp, ifr, &sc->media, command); 1931 break; 1932 1933 case SIOCSIFCAP: 1934 mask = (ifr->ifr_reqcap ^ ifp->if_capenable) & 1935 ifp->if_capabilities; 1936 ifp->if_capenable ^= mask; 1937 1938 /* NOTE: re_init will setup if_hwassist. */ 1939 ifp->if_hwassist = 0; 1940 1941 /* Setup flags for the backend. */ 1942 if (ifp->if_capenable & IFCAP_RXCSUM) 1943 sc->re_rx_cstag = 1; 1944 else 1945 sc->re_rx_cstag = 0; 1946 if (ifp->if_capenable & IFCAP_TXCSUM) 1947 sc->re_tx_cstag = 1; 1948 else 1949 sc->re_tx_cstag = 0; 1950 1951 if (mask && (ifp->if_flags & IFF_RUNNING)) 1952 re_init(sc); 1953 break; 1954 1955 default: 1956 error = ether_ioctl(ifp, command, data); 1957 break; 1958 } 1959 return(error); 1960 } 1961 1962 static void 1963 re_watchdog(struct ifnet *ifp) 1964 { 1965 struct re_softc *sc = ifp->if_softc; 1966 1967 ASSERT_SERIALIZED(ifp->if_serializer); 1968 1969 IFNET_STAT_INC(ifp, oerrors, 1); 1970 1971 re_txeof(sc); 1972 re_rxeof(sc); 1973 1974 if (sc->re_ldata.re_tx_free != sc->re_tx_desc_cnt) { 1975 if_printf(ifp, "watchdog timeout, txd free %d\n", 1976 sc->re_ldata.re_tx_free); 1977 rtl_reset(sc); 1978 re_init(sc); 1979 } 1980 } 1981 1982 /* 1983 * Stop the adapter and free any mbufs allocated to the 1984 * RX and TX lists. 1985 */ 1986 static void 1987 re_stop(struct re_softc *sc, boolean_t full_stop) 1988 { 1989 struct ifnet *ifp = &sc->arpcom.ac_if; 1990 int i; 1991 1992 ASSERT_SERIALIZED(ifp->if_serializer); 1993 1994 /* Stop the adapter. */ 1995 rtl_stop(sc); 1996 1997 ifp->if_timer = 0; 1998 if (full_stop) { 1999 callout_stop(&sc->re_timer); 2000 ifp->if_flags &= ~IFF_RUNNING; 2001 } 2002 ifq_clr_oactive(&ifp->if_snd); 2003 sc->re_flags &= ~(RE_F_TIMER_INTR | RE_F_DROP_RXFRAG | RE_F_LINKED); 2004 2005 re_free_rxchain(sc); 2006 2007 /* Free the TX list buffers. */ 2008 for (i = 0; i < sc->re_tx_desc_cnt; i++) { 2009 if (sc->re_ldata.re_tx_mbuf[i] != NULL) { 2010 bus_dmamap_unload(sc->re_ldata.re_tx_mtag, 2011 sc->re_ldata.re_tx_dmamap[i]); 2012 m_freem(sc->re_ldata.re_tx_mbuf[i]); 2013 sc->re_ldata.re_tx_mbuf[i] = NULL; 2014 } 2015 } 2016 2017 /* Free the RX list buffers. */ 2018 for (i = 0; i < sc->re_rx_desc_cnt; i++) { 2019 if (sc->re_ldata.re_rx_mbuf[i] != NULL) { 2020 if ((sc->re_flags & RE_F_USE_JPOOL) == 0) { 2021 bus_dmamap_unload(sc->re_ldata.re_rx_mtag, 2022 sc->re_ldata.re_rx_dmamap[i]); 2023 } 2024 m_freem(sc->re_ldata.re_rx_mbuf[i]); 2025 sc->re_ldata.re_rx_mbuf[i] = NULL; 2026 } 2027 } 2028 } 2029 2030 /* 2031 * Device suspend routine. Stop the interface and save some PCI 2032 * settings in case the BIOS doesn't restore them properly on 2033 * resume. 2034 */ 2035 static int 2036 re_suspend(device_t dev) 2037 { 2038 #ifndef BURN_BRIDGES 2039 int i; 2040 #endif 2041 struct re_softc *sc = device_get_softc(dev); 2042 struct ifnet *ifp = &sc->arpcom.ac_if; 2043 2044 lwkt_serialize_enter(ifp->if_serializer); 2045 2046 re_stop(sc, TRUE); 2047 2048 #ifndef BURN_BRIDGES 2049 for (i = 0; i < 5; i++) 2050 sc->saved_maps[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4); 2051 sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4); 2052 sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1); 2053 sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 2054 sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1); 2055 #endif 2056 2057 sc->re_flags |= RE_F_SUSPENDED; 2058 2059 lwkt_serialize_exit(ifp->if_serializer); 2060 2061 return (0); 2062 } 2063 2064 /* 2065 * Device resume routine. Restore some PCI settings in case the BIOS 2066 * doesn't, re-enable busmastering, and restart the interface if 2067 * appropriate. 2068 */ 2069 static int 2070 re_resume(device_t dev) 2071 { 2072 struct re_softc *sc = device_get_softc(dev); 2073 struct ifnet *ifp = &sc->arpcom.ac_if; 2074 #ifndef BURN_BRIDGES 2075 int i; 2076 #endif 2077 2078 lwkt_serialize_enter(ifp->if_serializer); 2079 2080 #ifndef BURN_BRIDGES 2081 /* better way to do this? */ 2082 for (i = 0; i < 5; i++) 2083 pci_write_config(dev, PCIR_MAPS + i * 4, sc->saved_maps[i], 4); 2084 pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4); 2085 pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1); 2086 pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1); 2087 pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1); 2088 2089 /* reenable busmastering */ 2090 pci_enable_busmaster(dev); 2091 pci_enable_io(dev, SYS_RES_IOPORT); 2092 #endif 2093 2094 /* reinitialize interface if necessary */ 2095 if (ifp->if_flags & IFF_UP) 2096 re_init(sc); 2097 2098 sc->re_flags &= ~RE_F_SUSPENDED; 2099 2100 lwkt_serialize_exit(ifp->if_serializer); 2101 2102 return (0); 2103 } 2104 2105 /* 2106 * Stop all chip I/O so that the kernel's probe routines don't 2107 * get confused by errant DMAs when rebooting. 2108 */ 2109 static void 2110 re_shutdown(device_t dev) 2111 { 2112 struct re_softc *sc = device_get_softc(dev); 2113 struct ifnet *ifp = &sc->arpcom.ac_if; 2114 2115 lwkt_serialize_enter(ifp->if_serializer); 2116 re_stop(sc, TRUE); 2117 rtl_hw_d3_para(sc); 2118 rtl_phy_power_down(sc); 2119 lwkt_serialize_exit(ifp->if_serializer); 2120 } 2121 2122 static int 2123 re_sysctl_rxtime(SYSCTL_HANDLER_ARGS) 2124 { 2125 struct re_softc *sc = arg1; 2126 2127 return re_sysctl_hwtime(oidp, arg1, arg2, req, &sc->re_rx_time); 2128 } 2129 2130 static int 2131 re_sysctl_txtime(SYSCTL_HANDLER_ARGS) 2132 { 2133 struct re_softc *sc = arg1; 2134 2135 return re_sysctl_hwtime(oidp, arg1, arg2, req, &sc->re_tx_time); 2136 } 2137 2138 static int 2139 re_sysctl_hwtime(SYSCTL_HANDLER_ARGS, int *hwtime) 2140 { 2141 struct re_softc *sc = arg1; 2142 struct ifnet *ifp = &sc->arpcom.ac_if; 2143 int error, v; 2144 2145 lwkt_serialize_enter(ifp->if_serializer); 2146 2147 v = *hwtime; 2148 error = sysctl_handle_int(oidp, &v, 0, req); 2149 if (error || req->newptr == NULL) 2150 goto back; 2151 2152 if (v <= 0) { 2153 error = EINVAL; 2154 goto back; 2155 } 2156 2157 if (v != *hwtime) { 2158 *hwtime = v; 2159 2160 if ((ifp->if_flags & (IFF_RUNNING | IFF_NPOLLING)) == 2161 IFF_RUNNING && sc->re_imtype == RE_IMTYPE_HW) 2162 re_setup_hw_im(sc); 2163 } 2164 back: 2165 lwkt_serialize_exit(ifp->if_serializer); 2166 return error; 2167 } 2168 2169 static int 2170 re_sysctl_simtime(SYSCTL_HANDLER_ARGS) 2171 { 2172 struct re_softc *sc = arg1; 2173 struct ifnet *ifp = &sc->arpcom.ac_if; 2174 int error, v; 2175 2176 lwkt_serialize_enter(ifp->if_serializer); 2177 2178 v = sc->re_sim_time; 2179 error = sysctl_handle_int(oidp, &v, 0, req); 2180 if (error || req->newptr == NULL) 2181 goto back; 2182 2183 if (v <= 0) { 2184 error = EINVAL; 2185 goto back; 2186 } 2187 2188 if (v != sc->re_sim_time) { 2189 sc->re_sim_time = v; 2190 2191 if ((ifp->if_flags & (IFF_RUNNING | IFF_NPOLLING)) == 2192 IFF_RUNNING && sc->re_imtype == RE_IMTYPE_SIM) { 2193 #ifdef foo 2194 /* 2195 * Following code causes various strange 2196 * performance problems. Hmm ... 2197 */ 2198 sc->re_write_imr(sc, 0); 2199 CSR_WRITE_4(sc, RE_TIMERINT, 0); 2200 CSR_READ_4(sc, RE_TIMERINT); /* flush */ 2201 2202 sc->re_write_imr(sc, sc->re_intrs); 2203 re_setup_sim_im(sc); 2204 #else 2205 re_setup_intr(sc, 0, RE_IMTYPE_NONE); 2206 DELAY(10); 2207 re_setup_intr(sc, 1, RE_IMTYPE_SIM); 2208 #endif 2209 } 2210 } 2211 back: 2212 lwkt_serialize_exit(ifp->if_serializer); 2213 return error; 2214 } 2215 2216 static int 2217 re_sysctl_imtype(SYSCTL_HANDLER_ARGS) 2218 { 2219 struct re_softc *sc = arg1; 2220 struct ifnet *ifp = &sc->arpcom.ac_if; 2221 int error, v; 2222 2223 lwkt_serialize_enter(ifp->if_serializer); 2224 2225 v = sc->re_imtype; 2226 error = sysctl_handle_int(oidp, &v, 0, req); 2227 if (error || req->newptr == NULL) 2228 goto back; 2229 2230 if (v != RE_IMTYPE_HW && v != RE_IMTYPE_SIM && v != RE_IMTYPE_NONE) { 2231 error = EINVAL; 2232 goto back; 2233 } 2234 if (v == RE_IMTYPE_HW && (sc->re_caps & RE_C_HWIM) == 0) { 2235 /* Can't do hardware interrupt moderation */ 2236 error = EOPNOTSUPP; 2237 goto back; 2238 } 2239 2240 if (v != sc->re_imtype) { 2241 sc->re_imtype = v; 2242 if ((ifp->if_flags & (IFF_RUNNING | IFF_NPOLLING)) == 2243 IFF_RUNNING) 2244 re_setup_intr(sc, 1, sc->re_imtype); 2245 } 2246 back: 2247 lwkt_serialize_exit(ifp->if_serializer); 2248 return error; 2249 } 2250 2251 static void 2252 re_setup_hw_im(struct re_softc *sc) 2253 { 2254 KKASSERT(sc->re_caps & RE_C_HWIM); 2255 2256 /* 2257 * Interrupt moderation 2258 * 2259 * 0xABCD 2260 * A - unknown (maybe TX related) 2261 * B - TX timer (unit: 25us) 2262 * C - unknown (maybe RX related) 2263 * D - RX timer (unit: 25us) 2264 * 2265 * 2266 * re(4)'s interrupt moderation is actually controlled by 2267 * two variables, like most other NICs (bge, bce etc.) 2268 * o timer 2269 * o number of packets [P] 2270 * 2271 * The logic relationship between these two variables is 2272 * similar to other NICs too: 2273 * if (timer expire || packets > [P]) 2274 * Interrupt is delivered 2275 * 2276 * Currently we only know how to set 'timer', but not 2277 * 'number of packets', which should be ~30, as far as I 2278 * tested (sink ~900Kpps, interrupt rate is 30KHz) 2279 */ 2280 CSR_WRITE_2(sc, RE_IM, 2281 RE_IM_RXTIME(sc->re_rx_time) | 2282 RE_IM_TXTIME(sc->re_tx_time) | 2283 RE_IM_MAGIC); 2284 } 2285 2286 static void 2287 re_disable_hw_im(struct re_softc *sc) 2288 { 2289 if (sc->re_caps & RE_C_HWIM) 2290 CSR_WRITE_2(sc, RE_IM, 0); 2291 } 2292 2293 static void 2294 re_setup_sim_im(struct re_softc *sc) 2295 { 2296 uint32_t ticks; 2297 2298 if (sc->re_if_flags & RL_FLAG_PCIE) { 2299 ticks = sc->re_sim_time * sc->re_bus_speed; 2300 } else { 2301 /* 2302 * Datasheet says tick decreases at bus speed, 2303 * but it seems the clock runs a little bit 2304 * faster, so we do some compensation here. 2305 */ 2306 ticks = (sc->re_sim_time * sc->re_bus_speed * 8) / 5; 2307 } 2308 CSR_WRITE_4(sc, RE_TIMERINT, ticks); 2309 2310 CSR_WRITE_4(sc, RE_TIMERCNT, 1); /* reload */ 2311 sc->re_flags |= RE_F_TIMER_INTR; 2312 } 2313 2314 static void 2315 re_disable_sim_im(struct re_softc *sc) 2316 { 2317 CSR_WRITE_4(sc, RE_TIMERINT, 0); 2318 sc->re_flags &= ~RE_F_TIMER_INTR; 2319 } 2320 2321 static void 2322 re_config_imtype(struct re_softc *sc, int imtype) 2323 { 2324 switch (imtype) { 2325 case RE_IMTYPE_HW: 2326 KKASSERT(sc->re_caps & RE_C_HWIM); 2327 /* FALL THROUGH */ 2328 case RE_IMTYPE_NONE: 2329 sc->re_intrs = RE_INTRS; 2330 sc->re_rx_ack = RE_ISR_RX_OK | RE_ISR_FIFO_OFLOW | 2331 RE_ISR_RX_OVERRUN; 2332 sc->re_tx_ack = RE_ISR_TX_OK; 2333 break; 2334 2335 case RE_IMTYPE_SIM: 2336 sc->re_intrs = RE_INTRS_TIMER; 2337 sc->re_rx_ack = RE_ISR_PCS_TIMEOUT; 2338 sc->re_tx_ack = RE_ISR_PCS_TIMEOUT; 2339 break; 2340 2341 default: 2342 panic("%s: unknown imtype %d", 2343 sc->arpcom.ac_if.if_xname, imtype); 2344 } 2345 } 2346 2347 static void 2348 re_setup_intr(struct re_softc *sc, int enable_intrs, int imtype) 2349 { 2350 re_config_imtype(sc, imtype); 2351 2352 if (enable_intrs) 2353 sc->re_write_imr(sc, sc->re_intrs); 2354 else 2355 sc->re_write_imr(sc, 0); 2356 2357 sc->re_npoll.ifpc_stcount = 0; 2358 2359 switch (imtype) { 2360 case RE_IMTYPE_NONE: 2361 re_disable_sim_im(sc); 2362 re_disable_hw_im(sc); 2363 break; 2364 2365 case RE_IMTYPE_HW: 2366 KKASSERT(sc->re_caps & RE_C_HWIM); 2367 re_disable_sim_im(sc); 2368 re_setup_hw_im(sc); 2369 break; 2370 2371 case RE_IMTYPE_SIM: 2372 re_disable_hw_im(sc); 2373 re_setup_sim_im(sc); 2374 break; 2375 2376 default: 2377 panic("%s: unknown imtype %d", 2378 sc->arpcom.ac_if.if_xname, imtype); 2379 } 2380 } 2381 2382 static int 2383 re_jpool_alloc(struct re_softc *sc) 2384 { 2385 struct re_list_data *ldata = &sc->re_ldata; 2386 struct re_jbuf *jbuf; 2387 bus_addr_t paddr; 2388 bus_size_t jpool_size; 2389 bus_dmamem_t dmem; 2390 caddr_t buf; 2391 int i, error; 2392 2393 lwkt_serialize_init(&ldata->re_jbuf_serializer); 2394 2395 ldata->re_jbuf = kmalloc(sizeof(struct re_jbuf) * RE_JBUF_COUNT(sc), 2396 M_DEVBUF, M_WAITOK | M_ZERO); 2397 2398 jpool_size = RE_JBUF_COUNT(sc) * RE_JBUF_SIZE; 2399 2400 error = bus_dmamem_coherent(sc->re_parent_tag, 2401 RE_RXBUF_ALIGN, 0, 2402 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 2403 jpool_size, BUS_DMA_WAITOK, &dmem); 2404 if (error) { 2405 device_printf(sc->dev, "could not allocate jumbo memory\n"); 2406 return error; 2407 } 2408 ldata->re_jpool_tag = dmem.dmem_tag; 2409 ldata->re_jpool_map = dmem.dmem_map; 2410 ldata->re_jpool = dmem.dmem_addr; 2411 paddr = dmem.dmem_busaddr; 2412 2413 /* ..and split it into 9KB chunks */ 2414 SLIST_INIT(&ldata->re_jbuf_free); 2415 2416 buf = ldata->re_jpool; 2417 for (i = 0; i < RE_JBUF_COUNT(sc); i++) { 2418 jbuf = &ldata->re_jbuf[i]; 2419 2420 jbuf->re_sc = sc; 2421 jbuf->re_inuse = 0; 2422 jbuf->re_slot = i; 2423 jbuf->re_buf = buf; 2424 jbuf->re_paddr = paddr; 2425 2426 SLIST_INSERT_HEAD(&ldata->re_jbuf_free, jbuf, re_link); 2427 2428 buf += RE_JBUF_SIZE; 2429 paddr += RE_JBUF_SIZE; 2430 } 2431 return 0; 2432 } 2433 2434 static void 2435 re_jpool_free(struct re_softc *sc) 2436 { 2437 struct re_list_data *ldata = &sc->re_ldata; 2438 2439 if (ldata->re_jpool_tag != NULL) { 2440 bus_dmamap_unload(ldata->re_jpool_tag, ldata->re_jpool_map); 2441 bus_dmamem_free(ldata->re_jpool_tag, ldata->re_jpool, 2442 ldata->re_jpool_map); 2443 bus_dma_tag_destroy(ldata->re_jpool_tag); 2444 ldata->re_jpool_tag = NULL; 2445 } 2446 2447 if (ldata->re_jbuf != NULL) { 2448 kfree(ldata->re_jbuf, M_DEVBUF); 2449 ldata->re_jbuf = NULL; 2450 } 2451 } 2452 2453 #ifdef RE_JUMBO 2454 static struct re_jbuf * 2455 re_jbuf_alloc(struct re_softc *sc) 2456 { 2457 struct re_list_data *ldata = &sc->re_ldata; 2458 struct re_jbuf *jbuf; 2459 2460 lwkt_serialize_enter(&ldata->re_jbuf_serializer); 2461 2462 jbuf = SLIST_FIRST(&ldata->re_jbuf_free); 2463 if (jbuf != NULL) { 2464 SLIST_REMOVE_HEAD(&ldata->re_jbuf_free, re_link); 2465 jbuf->re_inuse = 1; 2466 } 2467 2468 lwkt_serialize_exit(&ldata->re_jbuf_serializer); 2469 2470 return jbuf; 2471 } 2472 2473 static void 2474 re_jbuf_free(void *arg) 2475 { 2476 struct re_jbuf *jbuf = arg; 2477 struct re_softc *sc = jbuf->re_sc; 2478 struct re_list_data *ldata = &sc->re_ldata; 2479 2480 if (&ldata->re_jbuf[jbuf->re_slot] != jbuf) { 2481 panic("%s: free wrong jumbo buffer", 2482 sc->arpcom.ac_if.if_xname); 2483 } else if (jbuf->re_inuse == 0) { 2484 panic("%s: jumbo buffer already freed", 2485 sc->arpcom.ac_if.if_xname); 2486 } 2487 2488 lwkt_serialize_enter(&ldata->re_jbuf_serializer); 2489 atomic_subtract_int(&jbuf->re_inuse, 1); 2490 if (jbuf->re_inuse == 0) 2491 SLIST_INSERT_HEAD(&ldata->re_jbuf_free, jbuf, re_link); 2492 lwkt_serialize_exit(&ldata->re_jbuf_serializer); 2493 } 2494 2495 static void 2496 re_jbuf_ref(void *arg) 2497 { 2498 struct re_jbuf *jbuf = arg; 2499 struct re_softc *sc = jbuf->re_sc; 2500 struct re_list_data *ldata = &sc->re_ldata; 2501 2502 if (&ldata->re_jbuf[jbuf->re_slot] != jbuf) { 2503 panic("%s: ref wrong jumbo buffer", 2504 sc->arpcom.ac_if.if_xname); 2505 } else if (jbuf->re_inuse == 0) { 2506 panic("%s: jumbo buffer already freed", 2507 sc->arpcom.ac_if.if_xname); 2508 } 2509 atomic_add_int(&jbuf->re_inuse, 1); 2510 } 2511 #endif /* RE_JUMBO */ 2512 2513 static void 2514 re_disable_aspm(device_t dev) 2515 { 2516 uint16_t link_cap, link_ctrl; 2517 uint8_t pcie_ptr, reg; 2518 2519 pcie_ptr = pci_get_pciecap_ptr(dev); 2520 if (pcie_ptr == 0) 2521 return; 2522 2523 link_cap = pci_read_config(dev, pcie_ptr + PCIER_LINKCAP, 2); 2524 if ((link_cap & PCIEM_LNKCAP_ASPM_MASK) == 0) 2525 return; 2526 2527 if (bootverbose) 2528 device_printf(dev, "disable ASPM\n"); 2529 2530 reg = pcie_ptr + PCIER_LINKCTRL; 2531 link_ctrl = pci_read_config(dev, reg, 2); 2532 link_ctrl &= ~(PCIEM_LNKCTL_ASPM_L0S | PCIEM_LNKCTL_ASPM_L1); 2533 pci_write_config(dev, reg, link_ctrl, 2); 2534 } 2535 2536 static void 2537 re_start_xmit(struct re_softc *sc) 2538 { 2539 CSR_WRITE_1(sc, RE_TPPOLL, RE_NPQ); 2540 } 2541 2542 static void 2543 re_write_imr(struct re_softc *sc, uint32_t val) 2544 { 2545 CSR_WRITE_2(sc, RE_IMR, val); 2546 } 2547 2548 static void 2549 re_write_isr(struct re_softc *sc, uint32_t val) 2550 { 2551 CSR_WRITE_2(sc, RE_ISR, val); 2552 } 2553 2554 static uint32_t 2555 re_read_isr(struct re_softc *sc) 2556 { 2557 return CSR_READ_2(sc, RE_ISR); 2558 } 2559 2560 static void 2561 re_start_xmit_8125(struct re_softc *sc) 2562 { 2563 CSR_WRITE_2(sc, RE_TPPOLL_8125, RE_NPQ_8125); 2564 } 2565 2566 static void 2567 re_write_imr_8125(struct re_softc *sc, uint32_t val) 2568 { 2569 CSR_WRITE_4(sc, RE_IMR0_8125, val); 2570 } 2571 2572 static void 2573 re_write_isr_8125(struct re_softc *sc, uint32_t val) 2574 { 2575 CSR_WRITE_4(sc, RE_ISR0_8125, val); 2576 } 2577 2578 static uint32_t 2579 re_read_isr_8125(struct re_softc *sc) 2580 { 2581 return CSR_READ_4(sc, RE_ISR0_8125); 2582 } 2583