1 /* 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/pci/if_rl.c,v 1.38.2.16 2003/03/05 18:42:33 njl Exp $ 33 */ 34 35 /* 36 * RealTek 8129/8139 PCI NIC driver 37 * 38 * Supports several extremely cheap PCI 10/100 adapters based on 39 * the RealTek chipset. Datasheets can be obtained from 40 * www.realtek.com.tw. 41 * 42 * Written by Bill Paul <wpaul@ctr.columbia.edu> 43 * Electrical Engineering Department 44 * Columbia University, New York City 45 */ 46 47 /* 48 * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is 49 * probably the worst PCI ethernet controller ever made, with the possible 50 * exception of the FEAST chip made by SMC. The 8139 supports bus-master 51 * DMA, but it has a terrible interface that nullifies any performance 52 * gains that bus-master DMA usually offers. 53 * 54 * For transmission, the chip offers a series of four TX descriptor 55 * registers. Each transmit frame must be in a contiguous buffer, aligned 56 * on a longword (32-bit) boundary. This means we almost always have to 57 * do mbuf copies in order to transmit a frame, except in the unlikely 58 * case where a) the packet fits into a single mbuf, and b) the packet 59 * is 32-bit aligned within the mbuf's data area. The presence of only 60 * four descriptor registers means that we can never have more than four 61 * packets queued for transmission at any one time. 62 * 63 * Reception is not much better. The driver has to allocate a single large 64 * buffer area (up to 64K in size) into which the chip will DMA received 65 * frames. Because we don't know where within this region received packets 66 * will begin or end, we have no choice but to copy data from the buffer 67 * area into mbufs in order to pass the packets up to the higher protocol 68 * levels. 69 * 70 * It's impossible given this rotten design to really achieve decent 71 * performance at 100Mbps, unless you happen to have a 400Mhz PII or 72 * some equally overmuscled CPU to drive it. 73 * 74 * On the bright side, the 8139 does have a built-in PHY, although 75 * rather than using an MDIO serial interface like most other NICs, the 76 * PHY registers are directly accessible through the 8139's register 77 * space. The 8139 supports autonegotiation, as well as a 64-bit multicast 78 * filter. 79 * 80 * The 8129 chip is an older version of the 8139 that uses an external PHY 81 * chip. The 8129 has a serial MDIO interface for accessing the MII where 82 * the 8139 lets you directly access the on-board PHY registers. We need 83 * to select which interface to use depending on the chip type. 84 */ 85 86 #include "opt_ifpoll.h" 87 88 #include <sys/param.h> 89 #include <sys/endian.h> 90 #include <sys/systm.h> 91 #include <sys/sockio.h> 92 #include <sys/mbuf.h> 93 #include <sys/malloc.h> 94 #include <sys/kernel.h> 95 #include <sys/module.h> 96 #include <sys/socket.h> 97 #include <sys/serialize.h> 98 #include <sys/bus.h> 99 #include <sys/rman.h> 100 #include <sys/interrupt.h> 101 102 #include <net/if.h> 103 #include <net/ifq_var.h> 104 #include <net/if_arp.h> 105 #include <net/ethernet.h> 106 #include <net/if_dl.h> 107 #include <net/if_media.h> 108 #include <net/if_poll.h> 109 110 #include <net/bpf.h> 111 112 #include <dev/netif/mii_layer/mii.h> 113 #include <dev/netif/mii_layer/miivar.h> 114 115 #include "pcidevs.h" 116 #include <bus/pci/pcireg.h> 117 #include <bus/pci/pcivar.h> 118 119 /* "controller miibus0" required. See GENERIC if you get errors here. */ 120 #include "miibus_if.h" 121 122 /* 123 * Default to using PIO access for this driver. On SMP systems, 124 * there appear to be problems with memory mapped mode: it looks like 125 * doing too many memory mapped access back to back in rapid succession 126 * can hang the bus. I'm inclined to blame this on crummy design/construction 127 * on the part of RealTek. Memory mapped mode does appear to work on 128 * uniprocessor systems though. 129 */ 130 #define RL_USEIOSPACE 131 132 #include <dev/netif/rl/if_rlreg.h> 133 134 /* 135 * Various supported device vendors/types and their names. 136 */ 137 static struct rl_type { 138 uint16_t rl_vid; 139 uint16_t rl_did; 140 const char *rl_name; 141 } rl_devs[] = { 142 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8129, 143 "RealTek 8129 10/100BaseTX" }, 144 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139, 145 "RealTek 8139 10/100BaseTX" }, 146 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139B, 147 "RealTek 8139 10/100BaseTX CardBus" }, 148 { PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_MPX5030, 149 "Accton MPX 5030/5038 10/100BaseTX" }, 150 { PCI_VENDOR_DELTA, PCI_PRODUCT_DELTA_8139, 151 "Delta Electronics 8139 10/100BaseTX" }, 152 { PCI_VENDOR_ADDTRON, PCI_PRODUCT_ADDTRON_8139, 153 "Addtron Technology 8139 10/100BaseTX" }, 154 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE520TX_C1, 155 "D-Link DFE-520TX C1 10/100BaseTX" }, 156 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE530TXPLUS, 157 "D-Link DFE-530TX+ 10/100BaseTX" }, 158 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE690TXD, 159 "D-Link DFE-690TX 10/100BaseTX" }, 160 { PCI_VENDOR_NORTEL, PCI_PRODUCT_NORTEL_BAYSTACK_21, 161 "Nortel Networks 10/100BaseTX" }, 162 { PCI_VENDOR_PEPPERCON, PCI_PRODUCT_PEPPERCON_ROLF, 163 "Peppercon AG ROL/F" }, 164 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CB_TXD, 165 "Corega FEther CB-TXD" }, 166 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_2CB_TXD, 167 "Corega FEtherII CB-TXD" }, 168 { PCI_VENDOR_PLANEX, PCI_PRODUCT_PLANEX_FNW_3800_TX, 169 "Planex FNW-3800-TX" }, 170 { 0, 0, NULL } 171 }; 172 173 static int rl_probe(device_t); 174 static int rl_attach(device_t); 175 static int rl_detach(device_t); 176 177 static int rl_encap(struct rl_softc *, struct mbuf * ); 178 179 static void rl_rxeof(struct rl_softc *); 180 static void rl_txeof(struct rl_softc *); 181 static void rl_intr(void *); 182 static void rl_tick(void *); 183 static void rl_start(struct ifnet *, struct ifaltq_subque *); 184 static int rl_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 185 static void rl_init(void *); 186 static void rl_stop (struct rl_softc *); 187 static void rl_watchdog(struct ifnet *); 188 static int rl_suspend(device_t); 189 static int rl_resume(device_t); 190 static void rl_shutdown(device_t); 191 static int rl_ifmedia_upd(struct ifnet *); 192 static void rl_ifmedia_sts(struct ifnet *, struct ifmediareq *); 193 194 static void rl_eeprom_putbyte(struct rl_softc *, int); 195 static void rl_eeprom_getword(struct rl_softc *, int, uint16_t *); 196 static void rl_read_eeprom(struct rl_softc *, caddr_t, int, int, int); 197 static void rl_mii_sync(struct rl_softc *); 198 static void rl_mii_send(struct rl_softc *, uint32_t, int); 199 static int rl_mii_readreg(struct rl_softc *, struct rl_mii_frame *); 200 static int rl_mii_writereg(struct rl_softc *, struct rl_mii_frame *); 201 202 static int rl_miibus_readreg(device_t, int, int); 203 static int rl_miibus_writereg(device_t, int, int, int); 204 static void rl_miibus_statchg(device_t); 205 206 static void rl_setmulti(struct rl_softc *); 207 static void rl_reset(struct rl_softc *); 208 static void rl_list_tx_init(struct rl_softc *); 209 210 #ifdef IFPOLL_ENABLE 211 static void rl_npoll(struct ifnet *, struct ifpoll_info *); 212 static void rl_npoll_compat(struct ifnet *, void *, int); 213 #endif 214 215 static int rl_dma_alloc(struct rl_softc *); 216 static void rl_dma_free(struct rl_softc *); 217 218 #ifdef RL_USEIOSPACE 219 #define RL_RES SYS_RES_IOPORT 220 #define RL_RID RL_PCI_LOIO 221 #else 222 #define RL_RES SYS_RES_MEMORY 223 #define RL_RID RL_PCI_LOMEM 224 #endif 225 226 static device_method_t rl_methods[] = { 227 /* Device interface */ 228 DEVMETHOD(device_probe, rl_probe), 229 DEVMETHOD(device_attach, rl_attach), 230 DEVMETHOD(device_detach, rl_detach), 231 DEVMETHOD(device_suspend, rl_suspend), 232 DEVMETHOD(device_resume, rl_resume), 233 DEVMETHOD(device_shutdown, rl_shutdown), 234 235 /* bus interface */ 236 DEVMETHOD(bus_print_child, bus_generic_print_child), 237 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 238 239 /* MII interface */ 240 DEVMETHOD(miibus_readreg, rl_miibus_readreg), 241 DEVMETHOD(miibus_writereg, rl_miibus_writereg), 242 DEVMETHOD(miibus_statchg, rl_miibus_statchg), 243 244 DEVMETHOD_END 245 }; 246 247 static DEFINE_CLASS_0(rl, rl_driver, rl_methods, sizeof(struct rl_softc)); 248 static devclass_t rl_devclass; 249 250 DECLARE_DUMMY_MODULE(if_rl); 251 DRIVER_MODULE(if_rl, pci, rl_driver, rl_devclass, NULL, NULL); 252 DRIVER_MODULE(if_rl, cardbus, rl_driver, rl_devclass, NULL, NULL); 253 DRIVER_MODULE(miibus, rl, miibus_driver, miibus_devclass, NULL, NULL); 254 MODULE_DEPEND(if_rl, miibus, 1, 1, 1); 255 256 #define EE_SET(x) \ 257 CSR_WRITE_1(sc, RL_EECMD, CSR_READ_1(sc, RL_EECMD) | (x)) 258 259 #define EE_CLR(x) \ 260 CSR_WRITE_1(sc, RL_EECMD, CSR_READ_1(sc, RL_EECMD) & ~(x)) 261 262 /* 263 * Send a read command and address to the EEPROM, check for ACK. 264 */ 265 static void 266 rl_eeprom_putbyte(struct rl_softc *sc, int addr) 267 { 268 int d, i; 269 270 d = addr | sc->rl_eecmd_read; 271 272 /* 273 * Feed in each bit and strobe the clock. 274 */ 275 for (i = 0x400; i; i >>= 1) { 276 if (d & i) 277 EE_SET(RL_EE_DATAIN); 278 else 279 EE_CLR(RL_EE_DATAIN); 280 DELAY(100); 281 EE_SET(RL_EE_CLK); 282 DELAY(150); 283 EE_CLR(RL_EE_CLK); 284 DELAY(100); 285 } 286 } 287 288 /* 289 * Read a word of data stored in the EEPROM at address 'addr.' 290 */ 291 static void 292 rl_eeprom_getword(struct rl_softc *sc, int addr, uint16_t *dest) 293 { 294 int i; 295 uint16_t word = 0; 296 297 /* Enter EEPROM access mode. */ 298 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 299 300 /* 301 * Send address of word we want to read. 302 */ 303 rl_eeprom_putbyte(sc, addr); 304 305 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 306 307 /* 308 * Start reading bits from EEPROM. 309 */ 310 for (i = 0x8000; i; i >>= 1) { 311 EE_SET(RL_EE_CLK); 312 DELAY(100); 313 if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) 314 word |= i; 315 EE_CLR(RL_EE_CLK); 316 DELAY(100); 317 } 318 319 /* Turn off EEPROM access mode. */ 320 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 321 322 *dest = word; 323 } 324 325 /* 326 * Read a sequence of words from the EEPROM. 327 */ 328 static void 329 rl_read_eeprom(struct rl_softc *sc, caddr_t dest, int off, int cnt, int swap) 330 { 331 int i; 332 u_int16_t word = 0, *ptr; 333 334 for (i = 0; i < cnt; i++) { 335 rl_eeprom_getword(sc, off + i, &word); 336 ptr = (u_int16_t *)(dest + (i * 2)); 337 if (swap) 338 *ptr = ntohs(word); 339 else 340 *ptr = word; 341 } 342 } 343 344 345 /* 346 * MII access routines are provided for the 8129, which 347 * doesn't have a built-in PHY. For the 8139, we fake things 348 * up by diverting rl_phy_readreg()/rl_phy_writereg() to the 349 * direct access PHY registers. 350 */ 351 #define MII_SET(x) \ 352 CSR_WRITE_1(sc, RL_MII, CSR_READ_1(sc, RL_MII) | x) 353 354 #define MII_CLR(x) \ 355 CSR_WRITE_1(sc, RL_MII, CSR_READ_1(sc, RL_MII) & ~x) 356 357 /* 358 * Sync the PHYs by setting data bit and strobing the clock 32 times. 359 */ 360 static void 361 rl_mii_sync(struct rl_softc *sc) 362 { 363 int i; 364 365 MII_SET(RL_MII_DIR|RL_MII_DATAOUT); 366 367 for (i = 0; i < 32; i++) { 368 MII_SET(RL_MII_CLK); 369 DELAY(1); 370 MII_CLR(RL_MII_CLK); 371 DELAY(1); 372 } 373 } 374 375 /* 376 * Clock a series of bits through the MII. 377 */ 378 static void 379 rl_mii_send(struct rl_softc *sc, uint32_t bits, int cnt) 380 { 381 int i; 382 383 MII_CLR(RL_MII_CLK); 384 385 for (i = (0x1 << (cnt - 1)); i; i >>= 1) { 386 if (bits & i) 387 MII_SET(RL_MII_DATAOUT); 388 else 389 MII_CLR(RL_MII_DATAOUT); 390 DELAY(1); 391 MII_CLR(RL_MII_CLK); 392 DELAY(1); 393 MII_SET(RL_MII_CLK); 394 } 395 } 396 397 /* 398 * Read an PHY register through the MII. 399 */ 400 static int 401 rl_mii_readreg(struct rl_softc *sc, struct rl_mii_frame *frame) 402 { 403 int ack, i; 404 405 /* 406 * Set up frame for RX. 407 */ 408 frame->mii_stdelim = RL_MII_STARTDELIM; 409 frame->mii_opcode = RL_MII_READOP; 410 frame->mii_turnaround = 0; 411 frame->mii_data = 0; 412 413 CSR_WRITE_2(sc, RL_MII, 0); 414 415 /* 416 * Turn on data xmit. 417 */ 418 MII_SET(RL_MII_DIR); 419 420 rl_mii_sync(sc); 421 422 /* 423 * Send command/address info. 424 */ 425 rl_mii_send(sc, frame->mii_stdelim, 2); 426 rl_mii_send(sc, frame->mii_opcode, 2); 427 rl_mii_send(sc, frame->mii_phyaddr, 5); 428 rl_mii_send(sc, frame->mii_regaddr, 5); 429 430 /* Idle bit */ 431 MII_CLR((RL_MII_CLK|RL_MII_DATAOUT)); 432 DELAY(1); 433 MII_SET(RL_MII_CLK); 434 DELAY(1); 435 436 /* Turn off xmit. */ 437 MII_CLR(RL_MII_DIR); 438 439 /* Check for ack */ 440 MII_CLR(RL_MII_CLK); 441 DELAY(1); 442 ack = CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN; 443 MII_SET(RL_MII_CLK); 444 DELAY(1); 445 446 /* 447 * Now try reading data bits. If the ack failed, we still 448 * need to clock through 16 cycles to keep the PHY(s) in sync. 449 */ 450 if (ack) { 451 for(i = 0; i < 16; i++) { 452 MII_CLR(RL_MII_CLK); 453 DELAY(1); 454 MII_SET(RL_MII_CLK); 455 DELAY(1); 456 } 457 } else { 458 for (i = 0x8000; i; i >>= 1) { 459 MII_CLR(RL_MII_CLK); 460 DELAY(1); 461 if (!ack) { 462 if (CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN) 463 frame->mii_data |= i; 464 DELAY(1); 465 } 466 MII_SET(RL_MII_CLK); 467 DELAY(1); 468 } 469 } 470 471 MII_CLR(RL_MII_CLK); 472 DELAY(1); 473 MII_SET(RL_MII_CLK); 474 DELAY(1); 475 476 return(ack ? 1 : 0); 477 } 478 479 /* 480 * Write to a PHY register through the MII. 481 */ 482 static int 483 rl_mii_writereg(struct rl_softc *sc, struct rl_mii_frame *frame) 484 { 485 /* 486 * Set up frame for TX. 487 */ 488 frame->mii_stdelim = RL_MII_STARTDELIM; 489 frame->mii_opcode = RL_MII_WRITEOP; 490 frame->mii_turnaround = RL_MII_TURNAROUND; 491 492 /* 493 * Turn on data output. 494 */ 495 MII_SET(RL_MII_DIR); 496 497 rl_mii_sync(sc); 498 499 rl_mii_send(sc, frame->mii_stdelim, 2); 500 rl_mii_send(sc, frame->mii_opcode, 2); 501 rl_mii_send(sc, frame->mii_phyaddr, 5); 502 rl_mii_send(sc, frame->mii_regaddr, 5); 503 rl_mii_send(sc, frame->mii_turnaround, 2); 504 rl_mii_send(sc, frame->mii_data, 16); 505 506 /* Idle bit. */ 507 MII_SET(RL_MII_CLK); 508 DELAY(1); 509 MII_CLR(RL_MII_CLK); 510 DELAY(1); 511 512 /* 513 * Turn off xmit. 514 */ 515 MII_CLR(RL_MII_DIR); 516 517 return(0); 518 } 519 520 static int 521 rl_miibus_readreg(device_t dev, int phy, int reg) 522 { 523 struct rl_softc *sc; 524 struct rl_mii_frame frame; 525 uint16_t rval = 0; 526 uint16_t rl8139_reg = 0; 527 528 sc = device_get_softc(dev); 529 530 if (sc->rl_type == RL_8139) { 531 /* Pretend the internal PHY is only at address 0 */ 532 if (phy) 533 return(0); 534 switch (reg) { 535 case MII_BMCR: 536 rl8139_reg = RL_BMCR; 537 break; 538 case MII_BMSR: 539 rl8139_reg = RL_BMSR; 540 break; 541 case MII_ANAR: 542 rl8139_reg = RL_ANAR; 543 break; 544 case MII_ANER: 545 rl8139_reg = RL_ANER; 546 break; 547 case MII_ANLPAR: 548 rl8139_reg = RL_LPAR; 549 break; 550 case MII_PHYIDR1: 551 case MII_PHYIDR2: 552 return(0); 553 break; 554 /* 555 * Allow the rlphy driver to read the media status 556 * register. If we have a link partner which does not 557 * support NWAY, this is the register which will tell 558 * us the results of parallel detection. 559 */ 560 case RL_MEDIASTAT: 561 rval = CSR_READ_1(sc, RL_MEDIASTAT); 562 return(rval); 563 default: 564 device_printf(dev, "bad phy register\n"); 565 return(0); 566 } 567 rval = CSR_READ_2(sc, rl8139_reg); 568 return(rval); 569 } 570 571 bzero(&frame, sizeof(frame)); 572 573 frame.mii_phyaddr = phy; 574 frame.mii_regaddr = reg; 575 rl_mii_readreg(sc, &frame); 576 577 return(frame.mii_data); 578 } 579 580 static int 581 rl_miibus_writereg(device_t dev, int phy, int reg, int data) 582 { 583 struct rl_softc *sc; 584 struct rl_mii_frame frame; 585 u_int16_t rl8139_reg = 0; 586 587 sc = device_get_softc(dev); 588 589 if (sc->rl_type == RL_8139) { 590 /* Pretend the internal PHY is only at address 0 */ 591 if (phy) 592 return(0); 593 switch (reg) { 594 case MII_BMCR: 595 rl8139_reg = RL_BMCR; 596 break; 597 case MII_BMSR: 598 rl8139_reg = RL_BMSR; 599 break; 600 case MII_ANAR: 601 rl8139_reg = RL_ANAR; 602 break; 603 case MII_ANER: 604 rl8139_reg = RL_ANER; 605 break; 606 case MII_ANLPAR: 607 rl8139_reg = RL_LPAR; 608 break; 609 case MII_PHYIDR1: 610 case MII_PHYIDR2: 611 return(0); 612 default: 613 device_printf(dev, "bad phy register\n"); 614 return(0); 615 } 616 CSR_WRITE_2(sc, rl8139_reg, data); 617 return(0); 618 } 619 620 bzero(&frame, sizeof(frame)); 621 622 frame.mii_phyaddr = phy; 623 frame.mii_regaddr = reg; 624 frame.mii_data = data; 625 626 rl_mii_writereg(sc, &frame); 627 628 return(0); 629 } 630 631 static void 632 rl_miibus_statchg(device_t dev) 633 { 634 } 635 636 /* 637 * Program the 64-bit multicast hash filter. 638 */ 639 static void 640 rl_setmulti(struct rl_softc *sc) 641 { 642 struct ifnet *ifp; 643 int h = 0; 644 uint32_t hashes[2] = { 0, 0 }; 645 struct ifmultiaddr *ifma; 646 uint32_t rxfilt; 647 int mcnt = 0; 648 649 ifp = &sc->arpcom.ac_if; 650 651 rxfilt = CSR_READ_4(sc, RL_RXCFG); 652 653 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 654 rxfilt |= RL_RXCFG_RX_MULTI; 655 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 656 CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF); 657 CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF); 658 return; 659 } 660 661 /* first, zot all the existing hash bits */ 662 CSR_WRITE_4(sc, RL_MAR0, 0); 663 CSR_WRITE_4(sc, RL_MAR4, 0); 664 665 /* now program new ones */ 666 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 667 if (ifma->ifma_addr->sa_family != AF_LINK) 668 continue; 669 h = ether_crc32_be( 670 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 671 ETHER_ADDR_LEN) >> 26; 672 if (h < 32) 673 hashes[0] |= (1 << h); 674 else 675 hashes[1] |= (1 << (h - 32)); 676 mcnt++; 677 } 678 679 if (mcnt) 680 rxfilt |= RL_RXCFG_RX_MULTI; 681 else 682 rxfilt &= ~RL_RXCFG_RX_MULTI; 683 684 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 685 CSR_WRITE_4(sc, RL_MAR0, hashes[0]); 686 CSR_WRITE_4(sc, RL_MAR4, hashes[1]); 687 } 688 689 static void 690 rl_reset(struct rl_softc *sc) 691 { 692 int i; 693 694 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); 695 696 for (i = 0; i < RL_TIMEOUT; i++) { 697 DELAY(10); 698 if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) 699 break; 700 } 701 if (i == RL_TIMEOUT) 702 device_printf(sc->rl_dev, "reset never completed!\n"); 703 } 704 705 /* 706 * Probe for a RealTek 8129/8139 chip. Check the PCI vendor and device 707 * IDs against our list and return a device name if we find a match. 708 * 709 * Return with a value < 0 to give re(4) a change to attach. 710 */ 711 static int 712 rl_probe(device_t dev) 713 { 714 struct rl_type *t; 715 uint16_t product = pci_get_device(dev); 716 uint16_t vendor = pci_get_vendor(dev); 717 718 for (t = rl_devs; t->rl_name != NULL; t++) { 719 if (vendor == t->rl_vid && product == t->rl_did) { 720 device_set_desc(dev, t->rl_name); 721 return(-100); 722 } 723 } 724 725 return(ENXIO); 726 } 727 728 /* 729 * Attach the interface. Allocate softc structures, do ifmedia 730 * setup and ethernet/BPF attach. 731 */ 732 static int 733 rl_attach(device_t dev) 734 { 735 uint8_t eaddr[ETHER_ADDR_LEN]; 736 uint16_t as[3]; 737 struct rl_softc *sc; 738 struct ifnet *ifp; 739 uint16_t rl_did = 0; 740 int error = 0, rid, i; 741 742 sc = device_get_softc(dev); 743 sc->rl_dev = dev; 744 745 /* 746 * Handle power management nonsense. 747 */ 748 749 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { 750 uint32_t iobase, membase, irq; 751 752 /* Save important PCI config data. */ 753 iobase = pci_read_config(dev, RL_PCI_LOIO, 4); 754 membase = pci_read_config(dev, RL_PCI_LOMEM, 4); 755 irq = pci_read_config(dev, RL_PCI_INTLINE, 4); 756 757 /* Reset the power state. */ 758 device_printf(dev, "chip is in D%d power mode " 759 "-- setting to D0\n", pci_get_powerstate(dev)); 760 pci_set_powerstate(dev, PCI_POWERSTATE_D0); 761 762 /* Restore PCI config data. */ 763 pci_write_config(dev, RL_PCI_LOIO, iobase, 4); 764 pci_write_config(dev, RL_PCI_LOMEM, membase, 4); 765 pci_write_config(dev, RL_PCI_INTLINE, irq, 4); 766 } 767 768 pci_enable_busmaster(dev); 769 770 rid = RL_RID; 771 sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE); 772 773 if (sc->rl_res == NULL) { 774 device_printf(dev, "couldn't map ports/memory\n"); 775 error = ENXIO; 776 goto fail; 777 } 778 779 sc->rl_btag = rman_get_bustag(sc->rl_res); 780 sc->rl_bhandle = rman_get_bushandle(sc->rl_res); 781 782 rid = 0; 783 sc->rl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 784 RF_SHAREABLE | RF_ACTIVE); 785 786 if (sc->rl_irq == NULL) { 787 device_printf(dev, "couldn't map interrupt\n"); 788 error = ENXIO; 789 goto fail; 790 } 791 792 callout_init(&sc->rl_stat_timer); 793 794 /* Reset the adapter. */ 795 rl_reset(sc); 796 797 sc->rl_eecmd_read = RL_EECMD_READ_6BIT; 798 rl_read_eeprom(sc, (uint8_t *)&rl_did, 0, 1, 0); 799 if (rl_did != 0x8129) 800 sc->rl_eecmd_read = RL_EECMD_READ_8BIT; 801 802 /* 803 * Get station address from the EEPROM. 804 */ 805 rl_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3, 0); 806 for (i = 0; i < 3; i++) { 807 eaddr[(i * 2) + 0] = as[i] & 0xff; 808 eaddr[(i * 2) + 1] = as[i] >> 8; 809 } 810 811 /* 812 * Now read the exact device type from the EEPROM to find 813 * out if it's an 8129 or 8139. 814 */ 815 rl_read_eeprom(sc, (caddr_t)&rl_did, RL_EE_PCI_DID, 1, 0); 816 817 if (rl_did == PCI_PRODUCT_REALTEK_RT8139 || 818 rl_did == PCI_PRODUCT_ACCTON_MPX5030 || 819 rl_did == PCI_PRODUCT_DELTA_8139 || 820 rl_did == PCI_PRODUCT_ADDTRON_8139 || 821 rl_did == PCI_PRODUCT_DLINK_DFE530TXPLUS || 822 rl_did == PCI_PRODUCT_REALTEK_RT8139B || 823 rl_did == PCI_PRODUCT_DLINK_DFE690TXD || 824 rl_did == PCI_PRODUCT_COREGA_CB_TXD || 825 rl_did == PCI_PRODUCT_COREGA_2CB_TXD || 826 rl_did == PCI_PRODUCT_PLANEX_FNW_3800_TX) { 827 sc->rl_type = RL_8139; 828 } else if (rl_did == PCI_PRODUCT_REALTEK_RT8129) { 829 sc->rl_type = RL_8129; 830 } else { 831 device_printf(dev, "unknown device ID: %x\n", rl_did); 832 sc->rl_type = RL_8139; 833 /* 834 * Read RL_IDR register to get ethernet address as accessing 835 * EEPROM may not extract correct address. 836 */ 837 for (i = 0; i < ETHER_ADDR_LEN; i++) 838 eaddr[i] = CSR_READ_1(sc, RL_IDR0 + i); 839 } 840 841 error = rl_dma_alloc(sc); 842 if (error) 843 goto fail; 844 845 /* Do MII setup */ 846 if (mii_phy_probe(dev, &sc->rl_miibus, rl_ifmedia_upd, 847 rl_ifmedia_sts)) { 848 device_printf(dev, "MII without any phy!\n"); 849 error = ENXIO; 850 goto fail; 851 } 852 853 ifp = &sc->arpcom.ac_if; 854 ifp->if_softc = sc; 855 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 856 ifp->if_mtu = ETHERMTU; 857 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 858 ifp->if_ioctl = rl_ioctl; 859 ifp->if_start = rl_start; 860 ifp->if_watchdog = rl_watchdog; 861 ifp->if_init = rl_init; 862 ifp->if_baudrate = 10000000; 863 ifp->if_capabilities = IFCAP_VLAN_MTU; 864 #ifdef IFPOLL_ENABLE 865 ifp->if_npoll = rl_npoll; 866 #endif 867 ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN); 868 ifq_set_ready(&ifp->if_snd); 869 870 /* 871 * Call MI attach routine. 872 */ 873 ether_ifattach(ifp, eaddr, NULL); 874 875 ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->rl_irq)); 876 877 #ifdef IFPOLL_ENABLE 878 ifpoll_compat_setup(&sc->rl_npoll, NULL, NULL, device_get_unit(dev), 879 ifp->if_serializer); 880 #endif 881 882 error = bus_setup_intr(dev, sc->rl_irq, INTR_MPSAFE, rl_intr, 883 sc, &sc->rl_intrhand, ifp->if_serializer); 884 885 if (error) { 886 device_printf(dev, "couldn't set up irq\n"); 887 ether_ifdetach(ifp); 888 goto fail; 889 } 890 891 return(0); 892 893 fail: 894 rl_detach(dev); 895 return(error); 896 } 897 898 static int 899 rl_detach(device_t dev) 900 { 901 struct rl_softc *sc; 902 struct ifnet *ifp; 903 904 sc = device_get_softc(dev); 905 ifp = &sc->arpcom.ac_if; 906 907 if (device_is_attached(dev)) { 908 lwkt_serialize_enter(ifp->if_serializer); 909 rl_stop(sc); 910 bus_teardown_intr(dev, sc->rl_irq, sc->rl_intrhand); 911 lwkt_serialize_exit(ifp->if_serializer); 912 913 ether_ifdetach(ifp); 914 } 915 916 if (sc->rl_miibus) 917 device_delete_child(dev, sc->rl_miibus); 918 bus_generic_detach(dev); 919 920 if (sc->rl_irq) 921 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq); 922 if (sc->rl_res) 923 bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); 924 925 rl_dma_free(sc); 926 927 return(0); 928 } 929 930 /* 931 * Initialize the transmit descriptors. 932 */ 933 static void 934 rl_list_tx_init(struct rl_softc *sc) 935 { 936 struct rl_chain_data *cd; 937 int i; 938 939 cd = &sc->rl_cdata; 940 for (i = 0; i < RL_TX_LIST_CNT; i++) { 941 cd->rl_tx_chain[i] = NULL; 942 CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 943 0x0000000); 944 } 945 946 sc->rl_cdata.cur_tx = 0; 947 sc->rl_cdata.last_tx = 0; 948 } 949 950 /* 951 * A frame has been uploaded: pass the resulting mbuf chain up to 952 * the higher level protocols. 953 * 954 * You know there's something wrong with a PCI bus-master chip design 955 * when you have to use m_devget(). 956 * 957 * The receive operation is badly documented in the datasheet, so I'll 958 * attempt to document it here. The driver provides a buffer area and 959 * places its base address in the RX buffer start address register. 960 * The chip then begins copying frames into the RX buffer. Each frame 961 * is preceded by a 32-bit RX status word which specifies the length 962 * of the frame and certain other status bits. Each frame (starting with 963 * the status word) is also 32-bit aligned. The frame length is in the 964 * first 16 bits of the status word; the lower 15 bits correspond with 965 * the 'rx status register' mentioned in the datasheet. 966 * 967 * Note: to make the Alpha happy, the frame payload needs to be aligned 968 * on a 32-bit boundary. To achieve this, we cheat a bit by copying from 969 * the ring buffer starting at an address two bytes before the actual 970 * data location. We can then shave off the first two bytes using m_adj(). 971 * The reason we do this is because m_devget() doesn't let us specify an 972 * offset into the mbuf storage space, so we have to artificially create 973 * one. The ring is allocated in such a way that there are a few unused 974 * bytes of space preceecing it so that it will be safe for us to do the 975 * 2-byte backstep even if reading from the ring at offset 0. 976 */ 977 static void 978 rl_rxeof(struct rl_softc *sc) 979 { 980 struct mbuf *m; 981 struct ifnet *ifp; 982 int total_len = 0; 983 uint32_t rxstat; 984 caddr_t rxbufpos; 985 int wrap = 0, done = 0; 986 uint16_t cur_rx = 0, max_bytes = 0, rx_bytes = 0; 987 988 ifp = &sc->arpcom.ac_if; 989 990 while((CSR_READ_1(sc, RL_COMMAND) & RL_CMD_EMPTY_RXBUF) == 0) { 991 if (!done) { 992 uint16_t limit; 993 994 done = 1; 995 996 cur_rx = (CSR_READ_2(sc, RL_CURRXADDR) + 16) % 997 RL_RXBUFLEN; 998 999 /* Do not try to read past this point. */ 1000 limit = CSR_READ_2(sc, RL_CURRXBUF) % RL_RXBUFLEN; 1001 if (limit < cur_rx) 1002 max_bytes = (RL_RXBUFLEN - cur_rx) + limit; 1003 else 1004 max_bytes = limit - cur_rx; 1005 } 1006 #ifdef IFPOLL_ENABLE 1007 if (ifp->if_flags & IFF_NPOLLING) { 1008 if (sc->rxcycles <= 0) 1009 break; 1010 sc->rxcycles--; 1011 } 1012 #endif /* IFPOLL_ENABLE */ 1013 rxbufpos = sc->rl_cdata.rl_rx_buf + cur_rx; 1014 rxstat = le32toh(*(uint32_t *)rxbufpos); 1015 1016 /* 1017 * Here's a totally undocumented fact for you. When the 1018 * RealTek chip is in the process of copying a packet into 1019 * RAM for you, the length will be 0xfff0. If you spot a 1020 * packet header with this value, you need to stop. The 1021 * datasheet makes absolutely no mention of this and 1022 * RealTek should be shot for this. 1023 */ 1024 if ((uint16_t)(rxstat >> 16) == RL_RXSTAT_UNFINISHED) 1025 break; 1026 1027 if ((rxstat & RL_RXSTAT_RXOK) == 0) { 1028 IFNET_STAT_INC(ifp, ierrors, 1); 1029 rl_init(sc); 1030 return; 1031 } 1032 1033 /* No errors; receive the packet. */ 1034 total_len = rxstat >> 16; 1035 rx_bytes += total_len + 4; 1036 1037 /* 1038 * XXX The RealTek chip includes the CRC with every 1039 * received frame, and there's no way to turn this 1040 * behavior off (at least, I can't find anything in 1041 * the manual that explains how to do it) so we have 1042 * to trim off the CRC manually. 1043 */ 1044 total_len -= ETHER_CRC_LEN; 1045 1046 /* 1047 * Avoid trying to read more bytes than we know 1048 * the chip has prepared for us. 1049 */ 1050 if (rx_bytes > max_bytes) 1051 break; 1052 1053 rxbufpos = sc->rl_cdata.rl_rx_buf + 1054 ((cur_rx + sizeof(uint32_t)) % RL_RXBUFLEN); 1055 1056 if (rxbufpos == (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN)) 1057 rxbufpos = sc->rl_cdata.rl_rx_buf; 1058 1059 wrap = (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN) - rxbufpos; 1060 1061 if (total_len > wrap) { 1062 /* 1063 * Fool m_devget() into thinking we want to copy 1064 * the whole buffer so we don't end up fragmenting 1065 * the data. 1066 */ 1067 m = m_devget(rxbufpos - RL_ETHER_ALIGN, 1068 wrap + RL_ETHER_ALIGN, 0, ifp); 1069 if (m == NULL) { 1070 IFNET_STAT_INC(ifp, ierrors, 1); 1071 } else { 1072 m_adj(m, RL_ETHER_ALIGN); 1073 m_copyback(m, wrap, total_len - wrap, 1074 sc->rl_cdata.rl_rx_buf); 1075 } 1076 cur_rx = (total_len - wrap + ETHER_CRC_LEN); 1077 } else { 1078 m = m_devget(rxbufpos - RL_ETHER_ALIGN, 1079 total_len + RL_ETHER_ALIGN, 0, ifp); 1080 if (m == NULL) { 1081 IFNET_STAT_INC(ifp, ierrors, 1); 1082 } else 1083 m_adj(m, RL_ETHER_ALIGN); 1084 cur_rx += total_len + 4 + ETHER_CRC_LEN; 1085 } 1086 1087 /* 1088 * Round up to 32-bit boundary. 1089 */ 1090 cur_rx = (cur_rx + 3) & ~3; 1091 CSR_WRITE_2(sc, RL_CURRXADDR, cur_rx - 16); 1092 1093 if (m == NULL) 1094 continue; 1095 1096 IFNET_STAT_INC(ifp, ipackets, 1); 1097 1098 ifp->if_input(ifp, m, NULL, -1); 1099 } 1100 } 1101 1102 /* 1103 * A frame was downloaded to the chip. It's safe for us to clean up 1104 * the list buffers. 1105 */ 1106 static void 1107 rl_txeof(struct rl_softc *sc) 1108 { 1109 struct ifnet *ifp; 1110 uint32_t txstat; 1111 1112 ifp = &sc->arpcom.ac_if; 1113 1114 /* 1115 * Go through our tx list and free mbufs for those 1116 * frames that have been uploaded. 1117 */ 1118 do { 1119 if (RL_LAST_TXMBUF(sc) == NULL) 1120 break; 1121 txstat = CSR_READ_4(sc, RL_LAST_TXSTAT(sc)); 1122 if ((txstat & (RL_TXSTAT_TX_OK | RL_TXSTAT_TX_UNDERRUN | 1123 RL_TXSTAT_TXABRT)) == 0) 1124 break; 1125 1126 IFNET_STAT_INC(ifp, collisions, 1127 (txstat & RL_TXSTAT_COLLCNT) >> 24); 1128 1129 bus_dmamap_unload(sc->rl_cdata.rl_tx_tag, RL_LAST_DMAMAP(sc)); 1130 m_freem(RL_LAST_TXMBUF(sc)); 1131 RL_LAST_TXMBUF(sc) = NULL; 1132 RL_INC(sc->rl_cdata.last_tx); 1133 1134 if (txstat & RL_TXSTAT_TX_UNDERRUN) { 1135 sc->rl_txthresh += 32; 1136 if (sc->rl_txthresh > RL_TX_THRESH_MAX) 1137 sc->rl_txthresh = RL_TX_THRESH_MAX; 1138 } 1139 1140 if (txstat & RL_TXSTAT_TX_OK) { 1141 IFNET_STAT_INC(ifp, opackets, 1); 1142 } else { 1143 IFNET_STAT_INC(ifp, oerrors, 1); 1144 if (txstat & (RL_TXSTAT_TXABRT | RL_TXSTAT_OUTOFWIN)) 1145 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1146 } 1147 ifq_clr_oactive(&ifp->if_snd); 1148 } while (sc->rl_cdata.last_tx != sc->rl_cdata.cur_tx); 1149 1150 if (RL_LAST_TXMBUF(sc) == NULL) 1151 ifp->if_timer = 0; 1152 else if (ifp->if_timer == 0) 1153 ifp->if_timer = 5; 1154 } 1155 1156 static void 1157 rl_tick(void *xsc) 1158 { 1159 struct rl_softc *sc = xsc; 1160 struct mii_data *mii; 1161 1162 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1163 1164 mii = device_get_softc(sc->rl_miibus); 1165 mii_tick(mii); 1166 1167 callout_reset(&sc->rl_stat_timer, hz, rl_tick, sc); 1168 1169 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1170 } 1171 1172 #ifdef IFPOLL_ENABLE 1173 1174 static void 1175 rl_npoll_compat(struct ifnet *ifp, void *arg __unused, int count) 1176 { 1177 struct rl_softc *sc = ifp->if_softc; 1178 1179 ASSERT_SERIALIZED(ifp->if_serializer); 1180 1181 sc->rxcycles = count; 1182 rl_rxeof(sc); 1183 rl_txeof(sc); 1184 if (!ifq_is_empty(&ifp->if_snd)) 1185 if_devstart(ifp); 1186 1187 if (sc->rl_npoll.ifpc_stcount-- == 0) { 1188 uint16_t status; 1189 1190 sc->rl_npoll.ifpc_stcount = sc->rl_npoll.ifpc_stfrac; 1191 1192 status = CSR_READ_2(sc, RL_ISR); 1193 if (status == 0xffff) 1194 return; 1195 if (status) 1196 CSR_WRITE_2(sc, RL_ISR, status); 1197 1198 /* 1199 * XXX check behaviour on receiver stalls. 1200 */ 1201 1202 if (status & RL_ISR_SYSTEM_ERR) { 1203 rl_reset(sc); 1204 rl_init(sc); 1205 } 1206 } 1207 } 1208 1209 static void 1210 rl_npoll(struct ifnet *ifp, struct ifpoll_info *info) 1211 { 1212 struct rl_softc *sc = ifp->if_softc; 1213 1214 ASSERT_SERIALIZED(ifp->if_serializer); 1215 1216 if (info != NULL) { 1217 int cpuid = sc->rl_npoll.ifpc_cpuid; 1218 1219 info->ifpi_rx[cpuid].poll_func = rl_npoll_compat; 1220 info->ifpi_rx[cpuid].arg = NULL; 1221 info->ifpi_rx[cpuid].serializer = ifp->if_serializer; 1222 1223 if (ifp->if_flags & IFF_RUNNING) { 1224 /* disable interrupts */ 1225 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1226 sc->rl_npoll.ifpc_stcount = 0; 1227 } 1228 ifq_set_cpuid(&ifp->if_snd, cpuid); 1229 } else { 1230 if (ifp->if_flags & IFF_RUNNING) { 1231 /* enable interrupts */ 1232 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1233 } 1234 ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->rl_irq)); 1235 } 1236 } 1237 1238 #endif /* IFPOLL_ENABLE */ 1239 1240 static void 1241 rl_intr(void *arg) 1242 { 1243 struct rl_softc *sc; 1244 struct ifnet *ifp; 1245 uint16_t status; 1246 1247 sc = arg; 1248 1249 if (sc->suspended) 1250 return; 1251 1252 ifp = &sc->arpcom.ac_if; 1253 1254 for (;;) { 1255 status = CSR_READ_2(sc, RL_ISR); 1256 /* If the card has gone away, the read returns 0xffff. */ 1257 if (status == 0xffff) 1258 break; 1259 1260 if (status != 0) 1261 CSR_WRITE_2(sc, RL_ISR, status); 1262 1263 if ((status & RL_INTRS) == 0) 1264 break; 1265 1266 if (status & RL_ISR_RX_OK) 1267 rl_rxeof(sc); 1268 1269 if (status & RL_ISR_RX_ERR) 1270 rl_rxeof(sc); 1271 1272 if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR)) 1273 rl_txeof(sc); 1274 1275 if (status & RL_ISR_SYSTEM_ERR) { 1276 rl_reset(sc); 1277 rl_init(sc); 1278 } 1279 1280 } 1281 1282 if (!ifq_is_empty(&ifp->if_snd)) 1283 if_devstart(ifp); 1284 } 1285 1286 /* 1287 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 1288 * pointers to the fragment pointers. 1289 */ 1290 static int 1291 rl_encap(struct rl_softc *sc, struct mbuf *m_head) 1292 { 1293 struct mbuf *m_new = NULL; 1294 bus_dma_segment_t seg; 1295 int nseg, error; 1296 1297 /* 1298 * The RealTek is brain damaged and wants longword-aligned 1299 * TX buffers, plus we can only have one fragment buffer 1300 * per packet. We have to copy pretty much all the time. 1301 */ 1302 m_new = m_defrag(m_head, M_NOWAIT); 1303 if (m_new == NULL) { 1304 m_freem(m_head); 1305 return ENOBUFS; 1306 } 1307 m_head = m_new; 1308 1309 /* Pad frames to at least 60 bytes. */ 1310 if (m_head->m_pkthdr.len < RL_MIN_FRAMELEN) { 1311 error = m_devpad(m_head, RL_MIN_FRAMELEN); 1312 if (error) { 1313 m_freem(m_head); 1314 return error; 1315 } 1316 } 1317 1318 /* Extract physical address. */ 1319 error = bus_dmamap_load_mbuf_segment(sc->rl_cdata.rl_tx_tag, 1320 RL_CUR_DMAMAP(sc), m_head, 1321 &seg, 1, &nseg, BUS_DMA_NOWAIT); 1322 if (error) { 1323 m_freem(m_head); 1324 return error; 1325 } 1326 1327 /* Sync the loaded TX buffer. */ 1328 bus_dmamap_sync(sc->rl_cdata.rl_tx_tag, RL_CUR_DMAMAP(sc), 1329 BUS_DMASYNC_PREWRITE); 1330 1331 /* Transmit */ 1332 CSR_WRITE_4(sc, RL_CUR_TXADDR(sc), seg.ds_addr); 1333 CSR_WRITE_4(sc, RL_CUR_TXSTAT(sc), 1334 RL_TXTHRESH(sc->rl_txthresh) | seg.ds_len); 1335 1336 RL_CUR_TXMBUF(sc) = m_head; 1337 return 0; 1338 } 1339 1340 /* 1341 * Main transmit routine. 1342 */ 1343 1344 static void 1345 rl_start(struct ifnet *ifp, struct ifaltq_subque *ifsq) 1346 { 1347 struct rl_softc *sc = ifp->if_softc; 1348 struct mbuf *m_head = NULL; 1349 1350 ASSERT_ALTQ_SQ_DEFAULT(ifp, ifsq); 1351 1352 if ((ifp->if_flags & IFF_RUNNING) == 0 || ifq_is_oactive(&ifp->if_snd)) 1353 return; 1354 1355 while (RL_CUR_TXMBUF(sc) == NULL) { 1356 m_head = ifq_dequeue(&ifp->if_snd); 1357 if (m_head == NULL) 1358 break; 1359 1360 if (rl_encap(sc, m_head)) 1361 continue; 1362 1363 /* 1364 * If there's a BPF listener, bounce a copy of this frame 1365 * to him. 1366 */ 1367 BPF_MTAP(ifp, RL_CUR_TXMBUF(sc)); 1368 1369 RL_INC(sc->rl_cdata.cur_tx); 1370 1371 /* 1372 * Set a timeout in case the chip goes out to lunch. 1373 */ 1374 ifp->if_timer = 5; 1375 } 1376 1377 /* 1378 * We broke out of the loop because all our TX slots are 1379 * full. Mark the NIC as busy until it drains some of the 1380 * packets from the queue. 1381 */ 1382 if (RL_CUR_TXMBUF(sc) != NULL) 1383 ifq_set_oactive(&ifp->if_snd); 1384 } 1385 1386 static void 1387 rl_init(void *xsc) 1388 { 1389 struct rl_softc *sc = xsc; 1390 struct ifnet *ifp = &sc->arpcom.ac_if; 1391 struct mii_data *mii; 1392 uint32_t rxcfg = 0; 1393 1394 mii = device_get_softc(sc->rl_miibus); 1395 1396 /* 1397 * Cancel pending I/O and free all RX/TX buffers. 1398 */ 1399 rl_stop(sc); 1400 1401 /* 1402 * Init our MAC address. Even though the chipset documentation 1403 * doesn't mention it, we need to enter "Config register write enable" 1404 * mode to modify the ID registers. 1405 */ 1406 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); 1407 CSR_WRITE_STREAM_4(sc, RL_IDR0, 1408 *(uint32_t *)(&sc->arpcom.ac_enaddr[0])); 1409 CSR_WRITE_STREAM_4(sc, RL_IDR4, 1410 *(uint32_t *)(&sc->arpcom.ac_enaddr[4])); 1411 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1412 1413 /* Init the RX buffer pointer register. */ 1414 CSR_WRITE_4(sc, RL_RXADDR, sc->rl_cdata.rl_rx_buf_paddr); 1415 1416 /* Init TX descriptors. */ 1417 rl_list_tx_init(sc); 1418 1419 /* 1420 * Enable transmit and receive. 1421 */ 1422 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1423 1424 /* 1425 * Set the initial TX and RX configuration. 1426 */ 1427 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1428 CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG); 1429 1430 /* Set the individual bit to receive frames for this host only. */ 1431 rxcfg = CSR_READ_4(sc, RL_RXCFG); 1432 rxcfg |= RL_RXCFG_RX_INDIV; 1433 1434 /* If we want promiscuous mode, set the allframes bit. */ 1435 if (ifp->if_flags & IFF_PROMISC) { 1436 rxcfg |= RL_RXCFG_RX_ALLPHYS; 1437 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1438 } else { 1439 rxcfg &= ~RL_RXCFG_RX_ALLPHYS; 1440 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1441 } 1442 1443 /* 1444 * Set capture broadcast bit to capture broadcast frames. 1445 */ 1446 if (ifp->if_flags & IFF_BROADCAST) { 1447 rxcfg |= RL_RXCFG_RX_BROAD; 1448 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1449 } else { 1450 rxcfg &= ~RL_RXCFG_RX_BROAD; 1451 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1452 } 1453 1454 /* 1455 * Program the multicast filter, if necessary. 1456 */ 1457 rl_setmulti(sc); 1458 1459 #ifdef IFPOLL_ENABLE 1460 /* 1461 * Only enable interrupts if we are polling, keep them off otherwise. 1462 */ 1463 if (ifp->if_flags & IFF_NPOLLING) { 1464 CSR_WRITE_2(sc, RL_IMR, 0); 1465 sc->rl_npoll.ifpc_stcount = 0; 1466 } else 1467 #endif /* IFPOLL_ENABLE */ 1468 /* 1469 * Enable interrupts. 1470 */ 1471 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1472 1473 /* Set initial TX threshold */ 1474 sc->rl_txthresh = RL_TX_THRESH_INIT; 1475 1476 /* Start RX/TX process. */ 1477 CSR_WRITE_4(sc, RL_MISSEDPKT, 0); 1478 1479 /* Enable receiver and transmitter. */ 1480 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1481 1482 mii_mediachg(mii); 1483 1484 CSR_WRITE_1(sc, RL_CFG1, RL_CFG1_DRVLOAD|RL_CFG1_FULLDUPLEX); 1485 1486 ifp->if_flags |= IFF_RUNNING; 1487 ifq_clr_oactive(&ifp->if_snd); 1488 1489 callout_reset(&sc->rl_stat_timer, hz, rl_tick, sc); 1490 } 1491 1492 /* 1493 * Set media options. 1494 */ 1495 static int 1496 rl_ifmedia_upd(struct ifnet *ifp) 1497 { 1498 struct rl_softc *sc; 1499 struct mii_data *mii; 1500 1501 sc = ifp->if_softc; 1502 mii = device_get_softc(sc->rl_miibus); 1503 mii_mediachg(mii); 1504 1505 return(0); 1506 } 1507 1508 /* 1509 * Report current media status. 1510 */ 1511 static void 1512 rl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1513 { 1514 struct rl_softc *sc = ifp->if_softc; 1515 struct mii_data *mii = device_get_softc(sc->rl_miibus); 1516 1517 mii_pollstat(mii); 1518 ifmr->ifm_active = mii->mii_media_active; 1519 ifmr->ifm_status = mii->mii_media_status; 1520 } 1521 1522 static int 1523 rl_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 1524 { 1525 struct rl_softc *sc = ifp->if_softc; 1526 struct ifreq *ifr = (struct ifreq *) data; 1527 struct mii_data *mii; 1528 int error = 0; 1529 1530 switch (command) { 1531 case SIOCSIFFLAGS: 1532 if (ifp->if_flags & IFF_UP) { 1533 rl_init(sc); 1534 } else { 1535 if (ifp->if_flags & IFF_RUNNING) 1536 rl_stop(sc); 1537 } 1538 error = 0; 1539 break; 1540 case SIOCADDMULTI: 1541 case SIOCDELMULTI: 1542 rl_setmulti(sc); 1543 error = 0; 1544 break; 1545 case SIOCGIFMEDIA: 1546 case SIOCSIFMEDIA: 1547 mii = device_get_softc(sc->rl_miibus); 1548 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1549 break; 1550 case SIOCSIFCAP: 1551 break; 1552 default: 1553 error = ether_ioctl(ifp, command, data); 1554 break; 1555 } 1556 1557 return(error); 1558 } 1559 1560 static void 1561 rl_watchdog(struct ifnet *ifp) 1562 { 1563 struct rl_softc *sc = ifp->if_softc; 1564 1565 device_printf(sc->rl_dev, "watchdog timeout\n"); 1566 1567 IFNET_STAT_INC(ifp, oerrors, 1); 1568 1569 rl_txeof(sc); 1570 rl_rxeof(sc); 1571 rl_init(sc); 1572 } 1573 1574 /* 1575 * Stop the adapter and free any mbufs allocated to the 1576 * RX and TX lists. 1577 */ 1578 static void 1579 rl_stop(struct rl_softc *sc) 1580 { 1581 struct ifnet *ifp = &sc->arpcom.ac_if; 1582 int i; 1583 1584 ifp->if_timer = 0; 1585 1586 callout_stop(&sc->rl_stat_timer); 1587 ifp->if_flags &= ~IFF_RUNNING; 1588 ifq_clr_oactive(&ifp->if_snd); 1589 1590 CSR_WRITE_1(sc, RL_COMMAND, 0x00); 1591 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1592 1593 /* 1594 * Free the TX list buffers. 1595 */ 1596 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1597 if (sc->rl_cdata.rl_tx_chain[i] != NULL) { 1598 bus_dmamap_unload(sc->rl_cdata.rl_tx_tag, 1599 sc->rl_cdata.rl_tx_dmamap[i]); 1600 m_freem(sc->rl_cdata.rl_tx_chain[i]); 1601 sc->rl_cdata.rl_tx_chain[i] = NULL; 1602 CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 1603 0x0000000); 1604 } 1605 } 1606 } 1607 1608 /* 1609 * Stop all chip I/O so that the kernel's probe routines don't 1610 * get confused by errant DMAs when rebooting. 1611 */ 1612 static void 1613 rl_shutdown(device_t dev) 1614 { 1615 struct rl_softc *sc; 1616 1617 sc = device_get_softc(dev); 1618 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1619 rl_stop(sc); 1620 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1621 } 1622 1623 /* 1624 * Device suspend routine. Stop the interface and save some PCI 1625 * settings in case the BIOS doesn't restore them properly on 1626 * resume. 1627 */ 1628 static int 1629 rl_suspend(device_t dev) 1630 { 1631 struct rl_softc *sc = device_get_softc(dev); 1632 int i; 1633 1634 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1635 rl_stop(sc); 1636 1637 for (i = 0; i < 5; i++) 1638 sc->saved_maps[i] = pci_read_config(dev, PCIR_BAR(i), 4); 1639 sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4); 1640 sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1); 1641 sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 1642 sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1); 1643 1644 sc->suspended = 1; 1645 1646 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1647 return (0); 1648 } 1649 1650 /* 1651 * Device resume routine. Restore some PCI settings in case the BIOS 1652 * doesn't, re-enable busmastering, and restart the interface if 1653 * appropriate. 1654 */ 1655 static int 1656 rl_resume(device_t dev) 1657 { 1658 struct rl_softc *sc = device_get_softc(dev); 1659 struct ifnet *ifp = &sc->arpcom.ac_if; 1660 int i; 1661 1662 lwkt_serialize_enter(ifp->if_serializer); 1663 1664 /* better way to do this? */ 1665 for (i = 0; i < 5; i++) 1666 pci_write_config(dev, PCIR_BAR(i), sc->saved_maps[i], 4); 1667 pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4); 1668 pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1); 1669 pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1); 1670 pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1); 1671 1672 /* reenable busmastering */ 1673 pci_enable_busmaster(dev); 1674 pci_enable_io(dev, RL_RES); 1675 1676 /* reinitialize interface if necessary */ 1677 if (ifp->if_flags & IFF_UP) 1678 rl_init(sc); 1679 1680 sc->suspended = 0; 1681 lwkt_serialize_exit(ifp->if_serializer); 1682 return (0); 1683 } 1684 1685 static int 1686 rl_dma_alloc(struct rl_softc *sc) 1687 { 1688 bus_dmamem_t dmem; 1689 int error, i; 1690 1691 error = bus_dma_tag_create(NULL, /* parent */ 1692 1, 0, /* alignment, boundary */ 1693 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1694 BUS_SPACE_MAXADDR, /* highaddr */ 1695 NULL, NULL, /* filter, filterarg */ 1696 BUS_SPACE_MAXSIZE_32BIT,/* maxsize */ 1697 0, /* nsegments */ 1698 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 1699 0, /* flags */ 1700 &sc->rl_parent_tag); 1701 if (error) { 1702 device_printf(sc->rl_dev, "can't create parent tag\n"); 1703 return error; 1704 } 1705 1706 /* Allocate a chunk of coherent memory for RX */ 1707 error = bus_dmamem_coherent(sc->rl_parent_tag, 1, 0, 1708 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1709 RL_RXBUFLEN + 1518, BUS_DMA_WAITOK, &dmem); 1710 if (error) 1711 return error; 1712 1713 sc->rl_cdata.rl_rx_tag = dmem.dmem_tag; 1714 sc->rl_cdata.rl_rx_dmamap = dmem.dmem_map; 1715 sc->rl_cdata.rl_rx_buf_ptr = dmem.dmem_addr; 1716 1717 /* NOTE: Apply same adjustment to vaddr and paddr */ 1718 sc->rl_cdata.rl_rx_buf = sc->rl_cdata.rl_rx_buf_ptr + sizeof(uint64_t); 1719 sc->rl_cdata.rl_rx_buf_paddr = dmem.dmem_busaddr + sizeof(uint64_t); 1720 1721 /* 1722 * Allocate TX mbuf's DMA tag and maps 1723 */ 1724 error = bus_dma_tag_create(sc->rl_parent_tag,/* parent */ 1725 RL_TXBUF_ALIGN, 0, /* alignment, boundary */ 1726 BUS_SPACE_MAXADDR, /* lowaddr */ 1727 BUS_SPACE_MAXADDR, /* highaddr */ 1728 NULL, NULL, /* filter, filterarg */ 1729 MCLBYTES, /* maxsize */ 1730 1, /* nsegments */ 1731 MCLBYTES, /* maxsegsize */ 1732 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK | 1733 BUS_DMA_ALIGNED, /* flags */ 1734 &sc->rl_cdata.rl_tx_tag); 1735 if (error) { 1736 device_printf(sc->rl_dev, "can't create TX mbuf tag\n"); 1737 return error; 1738 } 1739 1740 for (i = 0; i < RL_TX_LIST_CNT; ++i) { 1741 error = bus_dmamap_create(sc->rl_cdata.rl_tx_tag, 1742 BUS_DMA_WAITOK, &sc->rl_cdata.rl_tx_dmamap[i]); 1743 if (error) { 1744 int j; 1745 1746 for (j = 0; j < i; ++j) { 1747 bus_dmamap_destroy(sc->rl_cdata.rl_tx_tag, 1748 sc->rl_cdata.rl_tx_dmamap[j]); 1749 } 1750 bus_dma_tag_destroy(sc->rl_cdata.rl_tx_tag); 1751 sc->rl_cdata.rl_tx_tag = NULL; 1752 1753 device_printf(sc->rl_dev, "can't create TX mbuf map\n"); 1754 return error; 1755 } 1756 } 1757 return 0; 1758 } 1759 1760 static void 1761 rl_dma_free(struct rl_softc *sc) 1762 { 1763 if (sc->rl_cdata.rl_tx_tag != NULL) { 1764 int i; 1765 1766 for (i = 0; i < RL_TX_LIST_CNT; ++i) { 1767 bus_dmamap_destroy(sc->rl_cdata.rl_tx_tag, 1768 sc->rl_cdata.rl_tx_dmamap[i]); 1769 } 1770 bus_dma_tag_destroy(sc->rl_cdata.rl_tx_tag); 1771 } 1772 1773 if (sc->rl_cdata.rl_rx_tag != NULL) { 1774 bus_dmamap_unload(sc->rl_cdata.rl_rx_tag, 1775 sc->rl_cdata.rl_rx_dmamap); 1776 /* NOTE: Use rl_rx_buf_ptr here */ 1777 bus_dmamem_free(sc->rl_cdata.rl_rx_tag, 1778 sc->rl_cdata.rl_rx_buf_ptr, 1779 sc->rl_cdata.rl_rx_dmamap); 1780 bus_dma_tag_destroy(sc->rl_cdata.rl_rx_tag); 1781 } 1782 1783 if (sc->rl_parent_tag) 1784 bus_dma_tag_destroy(sc->rl_parent_tag); 1785 } 1786