1 /* 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/pci/if_rl.c,v 1.38.2.16 2003/03/05 18:42:33 njl Exp $ 33 * $DragonFly: src/sys/dev/netif/rl/if_rl.c,v 1.38 2008/08/17 04:32:34 sephe Exp $ 34 */ 35 36 /* 37 * RealTek 8129/8139 PCI NIC driver 38 * 39 * Supports several extremely cheap PCI 10/100 adapters based on 40 * the RealTek chipset. Datasheets can be obtained from 41 * www.realtek.com.tw. 42 * 43 * Written by Bill Paul <wpaul@ctr.columbia.edu> 44 * Electrical Engineering Department 45 * Columbia University, New York City 46 */ 47 48 /* 49 * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is 50 * probably the worst PCI ethernet controller ever made, with the possible 51 * exception of the FEAST chip made by SMC. The 8139 supports bus-master 52 * DMA, but it has a terrible interface that nullifies any performance 53 * gains that bus-master DMA usually offers. 54 * 55 * For transmission, the chip offers a series of four TX descriptor 56 * registers. Each transmit frame must be in a contiguous buffer, aligned 57 * on a longword (32-bit) boundary. This means we almost always have to 58 * do mbuf copies in order to transmit a frame, except in the unlikely 59 * case where a) the packet fits into a single mbuf, and b) the packet 60 * is 32-bit aligned within the mbuf's data area. The presence of only 61 * four descriptor registers means that we can never have more than four 62 * packets queued for transmission at any one time. 63 * 64 * Reception is not much better. The driver has to allocate a single large 65 * buffer area (up to 64K in size) into which the chip will DMA received 66 * frames. Because we don't know where within this region received packets 67 * will begin or end, we have no choice but to copy data from the buffer 68 * area into mbufs in order to pass the packets up to the higher protocol 69 * levels. 70 * 71 * It's impossible given this rotten design to really achieve decent 72 * performance at 100Mbps, unless you happen to have a 400Mhz PII or 73 * some equally overmuscled CPU to drive it. 74 * 75 * On the bright side, the 8139 does have a built-in PHY, although 76 * rather than using an MDIO serial interface like most other NICs, the 77 * PHY registers are directly accessible through the 8139's register 78 * space. The 8139 supports autonegotiation, as well as a 64-bit multicast 79 * filter. 80 * 81 * The 8129 chip is an older version of the 8139 that uses an external PHY 82 * chip. The 8129 has a serial MDIO interface for accessing the MII where 83 * the 8139 lets you directly access the on-board PHY registers. We need 84 * to select which interface to use depending on the chip type. 85 */ 86 87 #include "opt_polling.h" 88 89 #include <sys/param.h> 90 #include <sys/endian.h> 91 #include <sys/systm.h> 92 #include <sys/sockio.h> 93 #include <sys/mbuf.h> 94 #include <sys/malloc.h> 95 #include <sys/kernel.h> 96 #include <sys/module.h> 97 #include <sys/socket.h> 98 #include <sys/serialize.h> 99 #include <sys/bus.h> 100 #include <sys/rman.h> 101 #include <sys/thread2.h> 102 #include <sys/interrupt.h> 103 104 #include <net/if.h> 105 #include <net/ifq_var.h> 106 #include <net/if_arp.h> 107 #include <net/ethernet.h> 108 #include <net/if_dl.h> 109 #include <net/if_media.h> 110 111 #include <net/bpf.h> 112 113 #include <dev/netif/mii_layer/mii.h> 114 #include <dev/netif/mii_layer/miivar.h> 115 116 #include <bus/pci/pcidevs.h> 117 #include <bus/pci/pcireg.h> 118 #include <bus/pci/pcivar.h> 119 120 /* "controller miibus0" required. See GENERIC if you get errors here. */ 121 #include "miibus_if.h" 122 123 /* 124 * Default to using PIO access for this driver. On SMP systems, 125 * there appear to be problems with memory mapped mode: it looks like 126 * doing too many memory mapped access back to back in rapid succession 127 * can hang the bus. I'm inclined to blame this on crummy design/construction 128 * on the part of RealTek. Memory mapped mode does appear to work on 129 * uniprocessor systems though. 130 */ 131 #define RL_USEIOSPACE 132 133 #include <dev/netif/rl/if_rlreg.h> 134 135 /* 136 * Various supported device vendors/types and their names. 137 */ 138 static struct rl_type { 139 uint16_t rl_vid; 140 uint16_t rl_did; 141 const char *rl_name; 142 } rl_devs[] = { 143 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8129, 144 "RealTek 8129 10/100BaseTX" }, 145 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139, 146 "RealTek 8139 10/100BaseTX" }, 147 { PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139B, 148 "RealTek 8139 10/100BaseTX CardBus" }, 149 { PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_MPX5030, 150 "Accton MPX 5030/5038 10/100BaseTX" }, 151 { PCI_VENDOR_DELTA, PCI_PRODUCT_DELTA_8139, 152 "Delta Electronics 8139 10/100BaseTX" }, 153 { PCI_VENDOR_ADDTRON, PCI_PRODUCT_ADDTRON_8139, 154 "Addtron Technology 8139 10/100BaseTX" }, 155 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE530TXPLUS, 156 "D-Link DFE-530TX+ 10/100BaseTX" }, 157 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DFE690TXD, 158 "D-Link DFE-690TX 10/100BaseTX" }, 159 { PCI_VENDOR_NORTEL, PCI_PRODUCT_NORTEL_BAYSTACK_21, 160 "Nortel Networks 10/100BaseTX" }, 161 { PCI_VENDOR_PEPPERCON, PCI_PRODUCT_PEPPERCON_ROLF, 162 "Peppercon AG ROL/F" }, 163 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CB_TXD, 164 "Corega FEther CB-TXD" }, 165 { PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_2CB_TXD, 166 "Corega FEtherII CB-TXD" }, 167 { PCI_VENDOR_PLANEX, PCI_PRODUCT_PLANEX_FNW_3800_TX, 168 "Planex FNW-3800-TX" }, 169 { 0, 0, NULL } 170 }; 171 172 static int rl_probe(device_t); 173 static int rl_attach(device_t); 174 static int rl_detach(device_t); 175 176 static int rl_encap(struct rl_softc *, struct mbuf * ); 177 178 static void rl_rxeof(struct rl_softc *); 179 static void rl_txeof(struct rl_softc *); 180 static void rl_intr(void *); 181 static void rl_tick(void *); 182 static void rl_start(struct ifnet *); 183 static int rl_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 184 static void rl_init(void *); 185 static void rl_stop (struct rl_softc *); 186 static void rl_watchdog(struct ifnet *); 187 static int rl_suspend(device_t); 188 static int rl_resume(device_t); 189 static void rl_shutdown(device_t); 190 static int rl_ifmedia_upd(struct ifnet *); 191 static void rl_ifmedia_sts(struct ifnet *, struct ifmediareq *); 192 193 static void rl_eeprom_putbyte(struct rl_softc *, int); 194 static void rl_eeprom_getword(struct rl_softc *, int, uint16_t *); 195 static void rl_read_eeprom(struct rl_softc *, caddr_t, int, int, int); 196 static void rl_mii_sync(struct rl_softc *); 197 static void rl_mii_send(struct rl_softc *, uint32_t, int); 198 static int rl_mii_readreg(struct rl_softc *, struct rl_mii_frame *); 199 static int rl_mii_writereg(struct rl_softc *, struct rl_mii_frame *); 200 201 static int rl_miibus_readreg(device_t, int, int); 202 static int rl_miibus_writereg(device_t, int, int, int); 203 static void rl_miibus_statchg(device_t); 204 205 static void rl_setmulti(struct rl_softc *); 206 static void rl_reset(struct rl_softc *); 207 static void rl_list_tx_init(struct rl_softc *); 208 209 static void rl_dma_map_rxbuf(void *, bus_dma_segment_t *, int, int); 210 static void rl_dma_map_txbuf(void *, bus_dma_segment_t *, int, int); 211 #ifdef DEVICE_POLLING 212 static poll_handler_t rl_poll; 213 #endif 214 215 #ifdef RL_USEIOSPACE 216 #define RL_RES SYS_RES_IOPORT 217 #define RL_RID RL_PCI_LOIO 218 #else 219 #define RL_RES SYS_RES_MEMORY 220 #define RL_RID RL_PCI_LOMEM 221 #endif 222 223 static device_method_t rl_methods[] = { 224 /* Device interface */ 225 DEVMETHOD(device_probe, rl_probe), 226 DEVMETHOD(device_attach, rl_attach), 227 DEVMETHOD(device_detach, rl_detach), 228 DEVMETHOD(device_suspend, rl_suspend), 229 DEVMETHOD(device_resume, rl_resume), 230 DEVMETHOD(device_shutdown, rl_shutdown), 231 232 /* bus interface */ 233 DEVMETHOD(bus_print_child, bus_generic_print_child), 234 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 235 236 /* MII interface */ 237 DEVMETHOD(miibus_readreg, rl_miibus_readreg), 238 DEVMETHOD(miibus_writereg, rl_miibus_writereg), 239 DEVMETHOD(miibus_statchg, rl_miibus_statchg), 240 241 { 0, 0 } 242 }; 243 244 static DEFINE_CLASS_0(rl, rl_driver, rl_methods, sizeof(struct rl_softc)); 245 static devclass_t rl_devclass; 246 247 DECLARE_DUMMY_MODULE(if_rl); 248 DRIVER_MODULE(if_rl, pci, rl_driver, rl_devclass, 0, 0); 249 DRIVER_MODULE(if_rl, cardbus, rl_driver, rl_devclass, 0, 0); 250 DRIVER_MODULE(miibus, rl, miibus_driver, miibus_devclass, 0, 0); 251 MODULE_DEPEND(if_rl, miibus, 1, 1, 1); 252 253 #define EE_SET(x) \ 254 CSR_WRITE_1(sc, RL_EECMD, CSR_READ_1(sc, RL_EECMD) | (x)) 255 256 #define EE_CLR(x) \ 257 CSR_WRITE_1(sc, RL_EECMD, CSR_READ_1(sc, RL_EECMD) & ~(x)) 258 259 static void 260 rl_dma_map_rxbuf(void *arg, bus_dma_segment_t *segs, int nseg, int error) 261 { 262 struct rl_softc *sc = arg; 263 264 CSR_WRITE_4(sc, RL_RXADDR, segs->ds_addr & 0xFFFFFFFF); 265 } 266 267 static void 268 rl_dma_map_txbuf(void *arg, bus_dma_segment_t *segs, int nseg, int error) 269 { 270 struct rl_softc *sc = arg; 271 272 CSR_WRITE_4(sc, RL_CUR_TXADDR(sc), segs->ds_addr & 0xFFFFFFFF); 273 } 274 275 /* 276 * Send a read command and address to the EEPROM, check for ACK. 277 */ 278 static void 279 rl_eeprom_putbyte(struct rl_softc *sc, int addr) 280 { 281 int d, i; 282 283 d = addr | sc->rl_eecmd_read; 284 285 /* 286 * Feed in each bit and strobe the clock. 287 */ 288 for (i = 0x400; i; i >>= 1) { 289 if (d & i) 290 EE_SET(RL_EE_DATAIN); 291 else 292 EE_CLR(RL_EE_DATAIN); 293 DELAY(100); 294 EE_SET(RL_EE_CLK); 295 DELAY(150); 296 EE_CLR(RL_EE_CLK); 297 DELAY(100); 298 } 299 } 300 301 /* 302 * Read a word of data stored in the EEPROM at address 'addr.' 303 */ 304 static void 305 rl_eeprom_getword(struct rl_softc *sc, int addr, uint16_t *dest) 306 { 307 int i; 308 uint16_t word = 0; 309 310 /* Enter EEPROM access mode. */ 311 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 312 313 /* 314 * Send address of word we want to read. 315 */ 316 rl_eeprom_putbyte(sc, addr); 317 318 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL); 319 320 /* 321 * Start reading bits from EEPROM. 322 */ 323 for (i = 0x8000; i; i >>= 1) { 324 EE_SET(RL_EE_CLK); 325 DELAY(100); 326 if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) 327 word |= i; 328 EE_CLR(RL_EE_CLK); 329 DELAY(100); 330 } 331 332 /* Turn off EEPROM access mode. */ 333 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 334 335 *dest = word; 336 } 337 338 /* 339 * Read a sequence of words from the EEPROM. 340 */ 341 static void 342 rl_read_eeprom(struct rl_softc *sc, caddr_t dest, int off, int cnt, int swap) 343 { 344 int i; 345 u_int16_t word = 0, *ptr; 346 347 for (i = 0; i < cnt; i++) { 348 rl_eeprom_getword(sc, off + i, &word); 349 ptr = (u_int16_t *)(dest + (i * 2)); 350 if (swap) 351 *ptr = ntohs(word); 352 else 353 *ptr = word; 354 } 355 } 356 357 358 /* 359 * MII access routines are provided for the 8129, which 360 * doesn't have a built-in PHY. For the 8139, we fake things 361 * up by diverting rl_phy_readreg()/rl_phy_writereg() to the 362 * direct access PHY registers. 363 */ 364 #define MII_SET(x) \ 365 CSR_WRITE_1(sc, RL_MII, CSR_READ_1(sc, RL_MII) | x) 366 367 #define MII_CLR(x) \ 368 CSR_WRITE_1(sc, RL_MII, CSR_READ_1(sc, RL_MII) & ~x) 369 370 /* 371 * Sync the PHYs by setting data bit and strobing the clock 32 times. 372 */ 373 static void 374 rl_mii_sync(struct rl_softc *sc) 375 { 376 int i; 377 378 MII_SET(RL_MII_DIR|RL_MII_DATAOUT); 379 380 for (i = 0; i < 32; i++) { 381 MII_SET(RL_MII_CLK); 382 DELAY(1); 383 MII_CLR(RL_MII_CLK); 384 DELAY(1); 385 } 386 } 387 388 /* 389 * Clock a series of bits through the MII. 390 */ 391 static void 392 rl_mii_send(struct rl_softc *sc, uint32_t bits, int cnt) 393 { 394 int i; 395 396 MII_CLR(RL_MII_CLK); 397 398 for (i = (0x1 << (cnt - 1)); i; i >>= 1) { 399 if (bits & i) 400 MII_SET(RL_MII_DATAOUT); 401 else 402 MII_CLR(RL_MII_DATAOUT); 403 DELAY(1); 404 MII_CLR(RL_MII_CLK); 405 DELAY(1); 406 MII_SET(RL_MII_CLK); 407 } 408 } 409 410 /* 411 * Read an PHY register through the MII. 412 */ 413 static int 414 rl_mii_readreg(struct rl_softc *sc, struct rl_mii_frame *frame) 415 { 416 int ack, i; 417 418 /* 419 * Set up frame for RX. 420 */ 421 frame->mii_stdelim = RL_MII_STARTDELIM; 422 frame->mii_opcode = RL_MII_READOP; 423 frame->mii_turnaround = 0; 424 frame->mii_data = 0; 425 426 CSR_WRITE_2(sc, RL_MII, 0); 427 428 /* 429 * Turn on data xmit. 430 */ 431 MII_SET(RL_MII_DIR); 432 433 rl_mii_sync(sc); 434 435 /* 436 * Send command/address info. 437 */ 438 rl_mii_send(sc, frame->mii_stdelim, 2); 439 rl_mii_send(sc, frame->mii_opcode, 2); 440 rl_mii_send(sc, frame->mii_phyaddr, 5); 441 rl_mii_send(sc, frame->mii_regaddr, 5); 442 443 /* Idle bit */ 444 MII_CLR((RL_MII_CLK|RL_MII_DATAOUT)); 445 DELAY(1); 446 MII_SET(RL_MII_CLK); 447 DELAY(1); 448 449 /* Turn off xmit. */ 450 MII_CLR(RL_MII_DIR); 451 452 /* Check for ack */ 453 MII_CLR(RL_MII_CLK); 454 DELAY(1); 455 ack = CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN; 456 MII_SET(RL_MII_CLK); 457 DELAY(1); 458 459 /* 460 * Now try reading data bits. If the ack failed, we still 461 * need to clock through 16 cycles to keep the PHY(s) in sync. 462 */ 463 if (ack) { 464 for(i = 0; i < 16; i++) { 465 MII_CLR(RL_MII_CLK); 466 DELAY(1); 467 MII_SET(RL_MII_CLK); 468 DELAY(1); 469 } 470 } else { 471 for (i = 0x8000; i; i >>= 1) { 472 MII_CLR(RL_MII_CLK); 473 DELAY(1); 474 if (!ack) { 475 if (CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN) 476 frame->mii_data |= i; 477 DELAY(1); 478 } 479 MII_SET(RL_MII_CLK); 480 DELAY(1); 481 } 482 } 483 484 MII_CLR(RL_MII_CLK); 485 DELAY(1); 486 MII_SET(RL_MII_CLK); 487 DELAY(1); 488 489 return(ack ? 1 : 0); 490 } 491 492 /* 493 * Write to a PHY register through the MII. 494 */ 495 static int 496 rl_mii_writereg(struct rl_softc *sc, struct rl_mii_frame *frame) 497 { 498 /* 499 * Set up frame for TX. 500 */ 501 frame->mii_stdelim = RL_MII_STARTDELIM; 502 frame->mii_opcode = RL_MII_WRITEOP; 503 frame->mii_turnaround = RL_MII_TURNAROUND; 504 505 /* 506 * Turn on data output. 507 */ 508 MII_SET(RL_MII_DIR); 509 510 rl_mii_sync(sc); 511 512 rl_mii_send(sc, frame->mii_stdelim, 2); 513 rl_mii_send(sc, frame->mii_opcode, 2); 514 rl_mii_send(sc, frame->mii_phyaddr, 5); 515 rl_mii_send(sc, frame->mii_regaddr, 5); 516 rl_mii_send(sc, frame->mii_turnaround, 2); 517 rl_mii_send(sc, frame->mii_data, 16); 518 519 /* Idle bit. */ 520 MII_SET(RL_MII_CLK); 521 DELAY(1); 522 MII_CLR(RL_MII_CLK); 523 DELAY(1); 524 525 /* 526 * Turn off xmit. 527 */ 528 MII_CLR(RL_MII_DIR); 529 530 return(0); 531 } 532 533 static int 534 rl_miibus_readreg(device_t dev, int phy, int reg) 535 { 536 struct rl_softc *sc; 537 struct rl_mii_frame frame; 538 uint16_t rval = 0; 539 uint16_t rl8139_reg = 0; 540 541 sc = device_get_softc(dev); 542 543 if (sc->rl_type == RL_8139) { 544 /* Pretend the internal PHY is only at address 0 */ 545 if (phy) 546 return(0); 547 switch (reg) { 548 case MII_BMCR: 549 rl8139_reg = RL_BMCR; 550 break; 551 case MII_BMSR: 552 rl8139_reg = RL_BMSR; 553 break; 554 case MII_ANAR: 555 rl8139_reg = RL_ANAR; 556 break; 557 case MII_ANER: 558 rl8139_reg = RL_ANER; 559 break; 560 case MII_ANLPAR: 561 rl8139_reg = RL_LPAR; 562 break; 563 case MII_PHYIDR1: 564 case MII_PHYIDR2: 565 return(0); 566 break; 567 /* 568 * Allow the rlphy driver to read the media status 569 * register. If we have a link partner which does not 570 * support NWAY, this is the register which will tell 571 * us the results of parallel detection. 572 */ 573 case RL_MEDIASTAT: 574 rval = CSR_READ_1(sc, RL_MEDIASTAT); 575 return(rval); 576 default: 577 device_printf(dev, "bad phy register\n"); 578 return(0); 579 } 580 rval = CSR_READ_2(sc, rl8139_reg); 581 return(rval); 582 } 583 584 bzero(&frame, sizeof(frame)); 585 586 frame.mii_phyaddr = phy; 587 frame.mii_regaddr = reg; 588 rl_mii_readreg(sc, &frame); 589 590 return(frame.mii_data); 591 } 592 593 static int 594 rl_miibus_writereg(device_t dev, int phy, int reg, int data) 595 { 596 struct rl_softc *sc; 597 struct rl_mii_frame frame; 598 u_int16_t rl8139_reg = 0; 599 600 sc = device_get_softc(dev); 601 602 if (sc->rl_type == RL_8139) { 603 /* Pretend the internal PHY is only at address 0 */ 604 if (phy) 605 return(0); 606 switch (reg) { 607 case MII_BMCR: 608 rl8139_reg = RL_BMCR; 609 break; 610 case MII_BMSR: 611 rl8139_reg = RL_BMSR; 612 break; 613 case MII_ANAR: 614 rl8139_reg = RL_ANAR; 615 break; 616 case MII_ANER: 617 rl8139_reg = RL_ANER; 618 break; 619 case MII_ANLPAR: 620 rl8139_reg = RL_LPAR; 621 break; 622 case MII_PHYIDR1: 623 case MII_PHYIDR2: 624 return(0); 625 default: 626 device_printf(dev, "bad phy register\n"); 627 return(0); 628 } 629 CSR_WRITE_2(sc, rl8139_reg, data); 630 return(0); 631 } 632 633 bzero(&frame, sizeof(frame)); 634 635 frame.mii_phyaddr = phy; 636 frame.mii_regaddr = reg; 637 frame.mii_data = data; 638 639 rl_mii_writereg(sc, &frame); 640 641 return(0); 642 } 643 644 static void 645 rl_miibus_statchg(device_t dev) 646 { 647 } 648 649 /* 650 * Program the 64-bit multicast hash filter. 651 */ 652 static void 653 rl_setmulti(struct rl_softc *sc) 654 { 655 struct ifnet *ifp; 656 int h = 0; 657 uint32_t hashes[2] = { 0, 0 }; 658 struct ifmultiaddr *ifma; 659 uint32_t rxfilt; 660 int mcnt = 0; 661 662 ifp = &sc->arpcom.ac_if; 663 664 rxfilt = CSR_READ_4(sc, RL_RXCFG); 665 666 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 667 rxfilt |= RL_RXCFG_RX_MULTI; 668 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 669 CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF); 670 CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF); 671 return; 672 } 673 674 /* first, zot all the existing hash bits */ 675 CSR_WRITE_4(sc, RL_MAR0, 0); 676 CSR_WRITE_4(sc, RL_MAR4, 0); 677 678 /* now program new ones */ 679 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 680 if (ifma->ifma_addr->sa_family != AF_LINK) 681 continue; 682 h = ether_crc32_be( 683 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 684 ETHER_ADDR_LEN) >> 26; 685 if (h < 32) 686 hashes[0] |= (1 << h); 687 else 688 hashes[1] |= (1 << (h - 32)); 689 mcnt++; 690 } 691 692 if (mcnt) 693 rxfilt |= RL_RXCFG_RX_MULTI; 694 else 695 rxfilt &= ~RL_RXCFG_RX_MULTI; 696 697 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 698 CSR_WRITE_4(sc, RL_MAR0, hashes[0]); 699 CSR_WRITE_4(sc, RL_MAR4, hashes[1]); 700 } 701 702 static void 703 rl_reset(struct rl_softc *sc) 704 { 705 int i; 706 707 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); 708 709 for (i = 0; i < RL_TIMEOUT; i++) { 710 DELAY(10); 711 if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) 712 break; 713 } 714 if (i == RL_TIMEOUT) 715 device_printf(sc->rl_dev, "reset never completed!\n"); 716 } 717 718 /* 719 * Probe for a RealTek 8129/8139 chip. Check the PCI vendor and device 720 * IDs against our list and return a device name if we find a match. 721 * 722 * Return with a value < 0 to give re(4) a change to attach. 723 */ 724 static int 725 rl_probe(device_t dev) 726 { 727 struct rl_type *t; 728 uint16_t product = pci_get_device(dev); 729 uint16_t vendor = pci_get_vendor(dev); 730 731 for (t = rl_devs; t->rl_name != NULL; t++) { 732 if (vendor == t->rl_vid && product == t->rl_did) { 733 device_set_desc(dev, t->rl_name); 734 return(-100); 735 } 736 } 737 738 return(ENXIO); 739 } 740 741 /* 742 * Attach the interface. Allocate softc structures, do ifmedia 743 * setup and ethernet/BPF attach. 744 */ 745 static int 746 rl_attach(device_t dev) 747 { 748 uint8_t eaddr[ETHER_ADDR_LEN]; 749 uint16_t as[3]; 750 struct rl_softc *sc; 751 struct ifnet *ifp; 752 uint16_t rl_did = 0; 753 int error = 0, rid, i; 754 755 sc = device_get_softc(dev); 756 sc->rl_dev = dev; 757 758 /* 759 * Handle power management nonsense. 760 */ 761 762 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { 763 uint32_t iobase, membase, irq; 764 765 /* Save important PCI config data. */ 766 iobase = pci_read_config(dev, RL_PCI_LOIO, 4); 767 membase = pci_read_config(dev, RL_PCI_LOMEM, 4); 768 irq = pci_read_config(dev, RL_PCI_INTLINE, 4); 769 770 /* Reset the power state. */ 771 device_printf(dev, "chip is in D%d power mode " 772 "-- setting to D0\n", pci_get_powerstate(dev)); 773 pci_set_powerstate(dev, PCI_POWERSTATE_D0); 774 775 /* Restore PCI config data. */ 776 pci_write_config(dev, RL_PCI_LOIO, iobase, 4); 777 pci_write_config(dev, RL_PCI_LOMEM, membase, 4); 778 pci_write_config(dev, RL_PCI_INTLINE, irq, 4); 779 } 780 781 pci_enable_busmaster(dev); 782 783 rid = RL_RID; 784 sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE); 785 786 if (sc->rl_res == NULL) { 787 device_printf(dev, "couldn't map ports/memory\n"); 788 error = ENXIO; 789 goto fail; 790 } 791 792 sc->rl_btag = rman_get_bustag(sc->rl_res); 793 sc->rl_bhandle = rman_get_bushandle(sc->rl_res); 794 795 rid = 0; 796 sc->rl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 797 RF_SHAREABLE | RF_ACTIVE); 798 799 if (sc->rl_irq == NULL) { 800 device_printf(dev, "couldn't map interrupt\n"); 801 error = ENXIO; 802 goto fail; 803 } 804 805 callout_init(&sc->rl_stat_timer); 806 807 /* Reset the adapter. */ 808 rl_reset(sc); 809 810 sc->rl_eecmd_read = RL_EECMD_READ_6BIT; 811 rl_read_eeprom(sc, (uint8_t *)&rl_did, 0, 1, 0); 812 if (rl_did != 0x8129) 813 sc->rl_eecmd_read = RL_EECMD_READ_8BIT; 814 815 /* 816 * Get station address from the EEPROM. 817 */ 818 rl_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3, 0); 819 for (i = 0; i < 3; i++) { 820 eaddr[(i * 2) + 0] = as[i] & 0xff; 821 eaddr[(i * 2) + 1] = as[i] >> 8; 822 } 823 824 /* 825 * Now read the exact device type from the EEPROM to find 826 * out if it's an 8129 or 8139. 827 */ 828 rl_read_eeprom(sc, (caddr_t)&rl_did, RL_EE_PCI_DID, 1, 0); 829 830 if (rl_did == PCI_PRODUCT_REALTEK_RT8139 || 831 rl_did == PCI_PRODUCT_ACCTON_MPX5030 || 832 rl_did == PCI_PRODUCT_DELTA_8139 || 833 rl_did == PCI_PRODUCT_ADDTRON_8139 || 834 rl_did == PCI_PRODUCT_DLINK_DFE530TXPLUS || 835 rl_did == PCI_PRODUCT_REALTEK_RT8139B || 836 rl_did == PCI_PRODUCT_DLINK_DFE690TXD || 837 rl_did == PCI_PRODUCT_COREGA_CB_TXD || 838 rl_did == PCI_PRODUCT_COREGA_2CB_TXD || 839 rl_did == PCI_PRODUCT_PLANEX_FNW_3800_TX) 840 sc->rl_type = RL_8139; 841 else if (rl_did == PCI_PRODUCT_REALTEK_RT8129) 842 sc->rl_type = RL_8129; 843 else { 844 device_printf(dev, "unknown device ID: %x\n", rl_did); 845 error = ENXIO; 846 goto fail; 847 } 848 849 #define RL_NSEG_NEW 32 850 error = bus_dma_tag_create(NULL, /* parent */ 851 1, 0, /* alignment, boundary */ 852 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 853 BUS_SPACE_MAXADDR, /* highaddr */ 854 NULL, NULL, /* filter, filterarg */ 855 MAXBSIZE, RL_NSEG_NEW, /* maxsize, nsegments */ 856 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 857 BUS_DMA_ALLOCNOW, /* flags */ 858 &sc->rl_parent_tag); 859 860 if (error) { 861 device_printf(dev, "can't create parent tag\n"); 862 goto fail; 863 } 864 865 /* 866 * Now allocate a tag for the DMA descriptor lists. 867 * All of our lists are allocated as a contiguous block 868 * of memory. 869 */ 870 error = bus_dma_tag_create(sc->rl_parent_tag, /* parent */ 871 1, 0, /* alignment, boundary */ 872 BUS_SPACE_MAXADDR, /* lowaddr */ 873 BUS_SPACE_MAXADDR, /* highaddr */ 874 NULL, NULL, /* filter, filterarg */ 875 RL_RXBUFLEN + 1518, 1, /* maxsize, nsegments */ 876 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 877 0, /* flags */ 878 &sc->rl_tag); 879 880 if (error) { 881 device_printf(dev, "can't create RX tag\n"); 882 goto fail; 883 } 884 885 /* 886 * Now allocate a chunk of DMA-able memory based on the tag 887 * we just created. 888 */ 889 error = bus_dmamem_alloc(sc->rl_tag, (void **)&sc->rl_cdata.rl_rx_buf, 890 BUS_DMA_WAITOK, &sc->rl_cdata.rl_rx_dmamap); 891 892 if (error) { 893 device_printf(dev, "can't allocate RX memory!\n"); 894 error = ENXIO; 895 goto fail; 896 } 897 898 /* Leave a few bytes before the start of the RX ring buffer. */ 899 sc->rl_cdata.rl_rx_buf_ptr = sc->rl_cdata.rl_rx_buf; 900 sc->rl_cdata.rl_rx_buf += sizeof(u_int64_t); 901 902 /* Do MII setup */ 903 if (mii_phy_probe(dev, &sc->rl_miibus, rl_ifmedia_upd, 904 rl_ifmedia_sts)) { 905 device_printf(dev, "MII without any phy!\n"); 906 error = ENXIO; 907 goto fail; 908 } 909 910 ifp = &sc->arpcom.ac_if; 911 ifp->if_softc = sc; 912 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 913 ifp->if_mtu = ETHERMTU; 914 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 915 ifp->if_ioctl = rl_ioctl; 916 ifp->if_start = rl_start; 917 ifp->if_watchdog = rl_watchdog; 918 ifp->if_init = rl_init; 919 ifp->if_baudrate = 10000000; 920 ifp->if_capabilities = IFCAP_VLAN_MTU; 921 #ifdef DEVICE_POLLING 922 ifp->if_poll = rl_poll; 923 #endif 924 ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN); 925 ifq_set_ready(&ifp->if_snd); 926 927 /* 928 * Call MI attach routine. 929 */ 930 ether_ifattach(ifp, eaddr, NULL); 931 932 error = bus_setup_intr(dev, sc->rl_irq, INTR_MPSAFE, rl_intr, 933 sc, &sc->rl_intrhand, ifp->if_serializer); 934 935 if (error) { 936 device_printf(dev, "couldn't set up irq\n"); 937 ether_ifdetach(ifp); 938 goto fail; 939 } 940 941 ifp->if_cpuid = ithread_cpuid(rman_get_start(sc->rl_irq)); 942 KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus); 943 944 return(0); 945 946 fail: 947 rl_detach(dev); 948 return(error); 949 } 950 951 static int 952 rl_detach(device_t dev) 953 { 954 struct rl_softc *sc; 955 struct ifnet *ifp; 956 957 sc = device_get_softc(dev); 958 ifp = &sc->arpcom.ac_if; 959 960 if (device_is_attached(dev)) { 961 lwkt_serialize_enter(ifp->if_serializer); 962 rl_stop(sc); 963 bus_teardown_intr(dev, sc->rl_irq, sc->rl_intrhand); 964 lwkt_serialize_exit(ifp->if_serializer); 965 966 ether_ifdetach(ifp); 967 } 968 969 if (sc->rl_miibus) 970 device_delete_child(dev, sc->rl_miibus); 971 bus_generic_detach(dev); 972 973 if (sc->rl_irq) 974 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq); 975 if (sc->rl_res) 976 bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res); 977 978 if (sc->rl_cdata.rl_rx_buf) { 979 bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap); 980 bus_dmamem_free(sc->rl_tag, sc->rl_cdata.rl_rx_buf, 981 sc->rl_cdata.rl_rx_dmamap); 982 } 983 if (sc->rl_tag) 984 bus_dma_tag_destroy(sc->rl_tag); 985 if (sc->rl_parent_tag) 986 bus_dma_tag_destroy(sc->rl_parent_tag); 987 988 return(0); 989 } 990 991 /* 992 * Initialize the transmit descriptors. 993 */ 994 static void 995 rl_list_tx_init(struct rl_softc *sc) 996 { 997 struct rl_chain_data *cd; 998 int i; 999 1000 cd = &sc->rl_cdata; 1001 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1002 cd->rl_tx_chain[i] = NULL; 1003 CSR_WRITE_4(sc, 1004 RL_TXADDR0 + (i * sizeof(uint32_t)), 0x0000000); 1005 } 1006 1007 sc->rl_cdata.cur_tx = 0; 1008 sc->rl_cdata.last_tx = 0; 1009 } 1010 1011 /* 1012 * A frame has been uploaded: pass the resulting mbuf chain up to 1013 * the higher level protocols. 1014 * 1015 * You know there's something wrong with a PCI bus-master chip design 1016 * when you have to use m_devget(). 1017 * 1018 * The receive operation is badly documented in the datasheet, so I'll 1019 * attempt to document it here. The driver provides a buffer area and 1020 * places its base address in the RX buffer start address register. 1021 * The chip then begins copying frames into the RX buffer. Each frame 1022 * is preceded by a 32-bit RX status word which specifies the length 1023 * of the frame and certain other status bits. Each frame (starting with 1024 * the status word) is also 32-bit aligned. The frame length is in the 1025 * first 16 bits of the status word; the lower 15 bits correspond with 1026 * the 'rx status register' mentioned in the datasheet. 1027 * 1028 * Note: to make the Alpha happy, the frame payload needs to be aligned 1029 * on a 32-bit boundary. To achieve this, we cheat a bit by copying from 1030 * the ring buffer starting at an address two bytes before the actual 1031 * data location. We can then shave off the first two bytes using m_adj(). 1032 * The reason we do this is because m_devget() doesn't let us specify an 1033 * offset into the mbuf storage space, so we have to artificially create 1034 * one. The ring is allocated in such a way that there are a few unused 1035 * bytes of space preceecing it so that it will be safe for us to do the 1036 * 2-byte backstep even if reading from the ring at offset 0. 1037 */ 1038 static void 1039 rl_rxeof(struct rl_softc *sc) 1040 { 1041 struct mbuf *m; 1042 struct ifnet *ifp; 1043 int total_len = 0; 1044 uint32_t rxstat; 1045 caddr_t rxbufpos; 1046 int wrap = 0; 1047 uint16_t cur_rx, limit, max_bytes, rx_bytes = 0; 1048 1049 ifp = &sc->arpcom.ac_if; 1050 1051 bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, 1052 BUS_DMASYNC_POSTREAD); 1053 1054 cur_rx = (CSR_READ_2(sc, RL_CURRXADDR) + 16) % RL_RXBUFLEN; 1055 1056 /* Do not try to read past this point. */ 1057 limit = CSR_READ_2(sc, RL_CURRXBUF) % RL_RXBUFLEN; 1058 1059 if (limit < cur_rx) 1060 max_bytes = (RL_RXBUFLEN - cur_rx) + limit; 1061 else 1062 max_bytes = limit - cur_rx; 1063 1064 while((CSR_READ_1(sc, RL_COMMAND) & RL_CMD_EMPTY_RXBUF) == 0) { 1065 #ifdef DEVICE_POLLING 1066 if (ifp->if_flags & IFF_POLLING) { 1067 if (sc->rxcycles <= 0) 1068 break; 1069 sc->rxcycles--; 1070 } 1071 #endif /* DEVICE_POLLING */ 1072 rxbufpos = sc->rl_cdata.rl_rx_buf + cur_rx; 1073 rxstat = le32toh(*(uint32_t *)rxbufpos); 1074 1075 /* 1076 * Here's a totally undocumented fact for you. When the 1077 * RealTek chip is in the process of copying a packet into 1078 * RAM for you, the length will be 0xfff0. If you spot a 1079 * packet header with this value, you need to stop. The 1080 * datasheet makes absolutely no mention of this and 1081 * RealTek should be shot for this. 1082 */ 1083 if ((uint16_t)(rxstat >> 16) == RL_RXSTAT_UNFINISHED) 1084 break; 1085 1086 if ((rxstat & RL_RXSTAT_RXOK) == 0) { 1087 ifp->if_ierrors++; 1088 rl_init(sc); 1089 return; 1090 } 1091 1092 /* No errors; receive the packet. */ 1093 total_len = rxstat >> 16; 1094 rx_bytes += total_len + 4; 1095 1096 /* 1097 * XXX The RealTek chip includes the CRC with every 1098 * received frame, and there's no way to turn this 1099 * behavior off (at least, I can't find anything in 1100 * the manual that explains how to do it) so we have 1101 * to trim off the CRC manually. 1102 */ 1103 total_len -= ETHER_CRC_LEN; 1104 1105 /* 1106 * Avoid trying to read more bytes than we know 1107 * the chip has prepared for us. 1108 */ 1109 if (rx_bytes > max_bytes) 1110 break; 1111 1112 rxbufpos = sc->rl_cdata.rl_rx_buf + 1113 ((cur_rx + sizeof(uint32_t)) % RL_RXBUFLEN); 1114 1115 if (rxbufpos == (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN)) 1116 rxbufpos = sc->rl_cdata.rl_rx_buf; 1117 1118 wrap = (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN) - rxbufpos; 1119 1120 if (total_len > wrap) { 1121 /* 1122 * Fool m_devget() into thinking we want to copy 1123 * the whole buffer so we don't end up fragmenting 1124 * the data. 1125 */ 1126 m = m_devget(rxbufpos - RL_ETHER_ALIGN, 1127 total_len + RL_ETHER_ALIGN, 0, ifp, NULL); 1128 if (m == NULL) { 1129 ifp->if_ierrors++; 1130 } else { 1131 m_adj(m, RL_ETHER_ALIGN); 1132 m_copyback(m, wrap, total_len - wrap, 1133 sc->rl_cdata.rl_rx_buf); 1134 } 1135 cur_rx = (total_len - wrap + ETHER_CRC_LEN); 1136 } else { 1137 m = m_devget(rxbufpos - RL_ETHER_ALIGN, 1138 total_len + RL_ETHER_ALIGN, 0, ifp, NULL); 1139 if (m == NULL) { 1140 ifp->if_ierrors++; 1141 } else 1142 m_adj(m, RL_ETHER_ALIGN); 1143 cur_rx += total_len + 4 + ETHER_CRC_LEN; 1144 } 1145 1146 /* 1147 * Round up to 32-bit boundary. 1148 */ 1149 cur_rx = (cur_rx + 3) & ~3; 1150 CSR_WRITE_2(sc, RL_CURRXADDR, cur_rx - 16); 1151 1152 if (m == NULL) 1153 continue; 1154 1155 ifp->if_ipackets++; 1156 1157 ifp->if_input(ifp, m); 1158 } 1159 } 1160 1161 /* 1162 * A frame was downloaded to the chip. It's safe for us to clean up 1163 * the list buffers. 1164 */ 1165 static void 1166 rl_txeof(struct rl_softc *sc) 1167 { 1168 struct ifnet *ifp; 1169 uint32_t txstat; 1170 1171 ifp = &sc->arpcom.ac_if; 1172 1173 /* 1174 * Go through our tx list and free mbufs for those 1175 * frames that have been uploaded. 1176 */ 1177 do { 1178 if (RL_LAST_TXMBUF(sc) == NULL) 1179 break; 1180 txstat = CSR_READ_4(sc, RL_LAST_TXSTAT(sc)); 1181 if ((txstat & (RL_TXSTAT_TX_OK | RL_TXSTAT_TX_UNDERRUN | 1182 RL_TXSTAT_TXABRT)) == 0) 1183 break; 1184 1185 ifp->if_collisions += (txstat & RL_TXSTAT_COLLCNT) >> 24; 1186 1187 bus_dmamap_unload(sc->rl_tag, RL_LAST_DMAMAP(sc)); 1188 bus_dmamap_destroy(sc->rl_tag, RL_LAST_DMAMAP(sc)); 1189 m_freem(RL_LAST_TXMBUF(sc)); 1190 RL_LAST_TXMBUF(sc) = NULL; 1191 RL_INC(sc->rl_cdata.last_tx); 1192 1193 if (txstat & RL_TXSTAT_TX_UNDERRUN) { 1194 sc->rl_txthresh += 32; 1195 if (sc->rl_txthresh > RL_TX_THRESH_MAX) 1196 sc->rl_txthresh = RL_TX_THRESH_MAX; 1197 } 1198 1199 if (txstat & RL_TXSTAT_TX_OK) { 1200 ifp->if_opackets++; 1201 } else { 1202 ifp->if_oerrors++; 1203 if (txstat & (RL_TXSTAT_TXABRT | RL_TXSTAT_OUTOFWIN)) 1204 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1205 } 1206 ifp->if_flags &= ~IFF_OACTIVE; 1207 } while (sc->rl_cdata.last_tx != sc->rl_cdata.cur_tx); 1208 1209 if (RL_LAST_TXMBUF(sc) == NULL) 1210 ifp->if_timer = 0; 1211 else if (ifp->if_timer == 0) 1212 ifp->if_timer = 5; 1213 } 1214 1215 static void 1216 rl_tick(void *xsc) 1217 { 1218 struct rl_softc *sc = xsc; 1219 struct mii_data *mii; 1220 1221 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1222 1223 mii = device_get_softc(sc->rl_miibus); 1224 mii_tick(mii); 1225 1226 callout_reset(&sc->rl_stat_timer, hz, rl_tick, sc); 1227 1228 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1229 } 1230 1231 #ifdef DEVICE_POLLING 1232 1233 static void 1234 rl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 1235 { 1236 struct rl_softc *sc = ifp->if_softc; 1237 1238 switch(cmd) { 1239 case POLL_REGISTER: 1240 /* disable interrupts */ 1241 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1242 break; 1243 case POLL_DEREGISTER: 1244 /* enable interrupts */ 1245 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1246 break; 1247 default: 1248 sc->rxcycles = count; 1249 rl_rxeof(sc); 1250 rl_txeof(sc); 1251 if (!ifq_is_empty(&ifp->if_snd)) 1252 if_devstart(ifp); 1253 1254 if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */ 1255 uint16_t status; 1256 1257 status = CSR_READ_2(sc, RL_ISR); 1258 if (status == 0xffff) 1259 return; 1260 if (status) 1261 CSR_WRITE_2(sc, RL_ISR, status); 1262 1263 /* 1264 * XXX check behaviour on receiver stalls. 1265 */ 1266 1267 if (status & RL_ISR_SYSTEM_ERR) { 1268 rl_reset(sc); 1269 rl_init(sc); 1270 } 1271 } 1272 break; 1273 } 1274 } 1275 #endif /* DEVICE_POLLING */ 1276 1277 static void 1278 rl_intr(void *arg) 1279 { 1280 struct rl_softc *sc; 1281 struct ifnet *ifp; 1282 uint16_t status; 1283 1284 sc = arg; 1285 1286 if (sc->suspended) 1287 return; 1288 1289 ifp = &sc->arpcom.ac_if; 1290 1291 for (;;) { 1292 status = CSR_READ_2(sc, RL_ISR); 1293 /* If the card has gone away, the read returns 0xffff. */ 1294 if (status == 0xffff) 1295 break; 1296 1297 if (status != 0) 1298 CSR_WRITE_2(sc, RL_ISR, status); 1299 1300 if ((status & RL_INTRS) == 0) 1301 break; 1302 1303 if (status & RL_ISR_RX_OK) 1304 rl_rxeof(sc); 1305 1306 if (status & RL_ISR_RX_ERR) 1307 rl_rxeof(sc); 1308 1309 if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR)) 1310 rl_txeof(sc); 1311 1312 if (status & RL_ISR_SYSTEM_ERR) { 1313 rl_reset(sc); 1314 rl_init(sc); 1315 } 1316 1317 } 1318 1319 if (!ifq_is_empty(&ifp->if_snd)) 1320 if_devstart(ifp); 1321 } 1322 1323 /* 1324 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 1325 * pointers to the fragment pointers. 1326 */ 1327 static int 1328 rl_encap(struct rl_softc *sc, struct mbuf *m_head) 1329 { 1330 struct mbuf *m_new = NULL; 1331 1332 /* 1333 * The RealTek is brain damaged and wants longword-aligned 1334 * TX buffers, plus we can only have one fragment buffer 1335 * per packet. We have to copy pretty much all the time. 1336 */ 1337 m_new = m_defrag(m_head, MB_DONTWAIT); 1338 1339 if (m_new == NULL) { 1340 m_freem(m_head); 1341 return(1); 1342 } 1343 m_head = m_new; 1344 1345 /* Pad frames to at least 60 bytes. */ 1346 if (m_head->m_pkthdr.len < RL_MIN_FRAMELEN) { 1347 /* 1348 * Make security concious people happy: zero out the 1349 * bytes in the pad area, since we don't know what 1350 * this mbuf cluster buffer's previous user might 1351 * have left in it. 1352 */ 1353 bzero(mtod(m_head, char *) + m_head->m_pkthdr.len, 1354 RL_MIN_FRAMELEN - m_head->m_pkthdr.len); 1355 m_head->m_pkthdr.len += 1356 (RL_MIN_FRAMELEN - m_head->m_pkthdr.len); 1357 m_head->m_len = m_head->m_pkthdr.len; 1358 } 1359 1360 RL_CUR_TXMBUF(sc) = m_head; 1361 1362 return(0); 1363 } 1364 1365 /* 1366 * Main transmit routine. 1367 */ 1368 1369 static void 1370 rl_start(struct ifnet *ifp) 1371 { 1372 struct rl_softc *sc = ifp->if_softc; 1373 struct mbuf *m_head = NULL; 1374 1375 if ((ifp->if_flags & (IFF_OACTIVE | IFF_RUNNING)) != IFF_RUNNING) 1376 return; 1377 1378 while (RL_CUR_TXMBUF(sc) == NULL) { 1379 m_head = ifq_dequeue(&ifp->if_snd, NULL); 1380 if (m_head == NULL) 1381 break; 1382 1383 if (rl_encap(sc, m_head)) 1384 break; 1385 1386 /* 1387 * If there's a BPF listener, bounce a copy of this frame 1388 * to him. 1389 */ 1390 BPF_MTAP(ifp, RL_CUR_TXMBUF(sc)); 1391 1392 /* 1393 * Transmit the frame. 1394 */ 1395 bus_dmamap_create(sc->rl_tag, 0, &RL_CUR_DMAMAP(sc)); 1396 bus_dmamap_load(sc->rl_tag, RL_CUR_DMAMAP(sc), 1397 mtod(RL_CUR_TXMBUF(sc), void *), 1398 RL_CUR_TXMBUF(sc)->m_pkthdr.len, 1399 rl_dma_map_txbuf, sc, 0); 1400 bus_dmamap_sync(sc->rl_tag, RL_CUR_DMAMAP(sc), 1401 BUS_DMASYNC_PREREAD); 1402 CSR_WRITE_4(sc, RL_CUR_TXSTAT(sc), 1403 RL_TXTHRESH(sc->rl_txthresh) | 1404 RL_CUR_TXMBUF(sc)->m_pkthdr.len); 1405 1406 RL_INC(sc->rl_cdata.cur_tx); 1407 1408 /* 1409 * Set a timeout in case the chip goes out to lunch. 1410 */ 1411 ifp->if_timer = 5; 1412 } 1413 1414 /* 1415 * We broke out of the loop because all our TX slots are 1416 * full. Mark the NIC as busy until it drains some of the 1417 * packets from the queue. 1418 */ 1419 if (RL_CUR_TXMBUF(sc) != NULL) 1420 ifp->if_flags |= IFF_OACTIVE; 1421 } 1422 1423 static void 1424 rl_init(void *xsc) 1425 { 1426 struct rl_softc *sc = xsc; 1427 struct ifnet *ifp = &sc->arpcom.ac_if; 1428 struct mii_data *mii; 1429 uint32_t rxcfg = 0; 1430 1431 mii = device_get_softc(sc->rl_miibus); 1432 1433 /* 1434 * Cancel pending I/O and free all RX/TX buffers. 1435 */ 1436 rl_stop(sc); 1437 1438 /* 1439 * Init our MAC address. Even though the chipset documentation 1440 * doesn't mention it, we need to enter "Config register write enable" 1441 * mode to modify the ID registers. 1442 */ 1443 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); 1444 CSR_WRITE_STREAM_4(sc, RL_IDR0, 1445 *(uint32_t *)(&sc->arpcom.ac_enaddr[0])); 1446 CSR_WRITE_STREAM_4(sc, RL_IDR4, 1447 *(uint32_t *)(&sc->arpcom.ac_enaddr[4])); 1448 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1449 1450 /* Init the RX buffer pointer register. */ 1451 bus_dmamap_load(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, 1452 sc->rl_cdata.rl_rx_buf, RL_RXBUFLEN, rl_dma_map_rxbuf, 1453 sc, 0); 1454 bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap, 1455 BUS_DMASYNC_PREWRITE); 1456 1457 /* Init TX descriptors. */ 1458 rl_list_tx_init(sc); 1459 1460 /* 1461 * Enable transmit and receive. 1462 */ 1463 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1464 1465 /* 1466 * Set the initial TX and RX configuration. 1467 */ 1468 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 1469 CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG); 1470 1471 /* Set the individual bit to receive frames for this host only. */ 1472 rxcfg = CSR_READ_4(sc, RL_RXCFG); 1473 rxcfg |= RL_RXCFG_RX_INDIV; 1474 1475 /* If we want promiscuous mode, set the allframes bit. */ 1476 if (ifp->if_flags & IFF_PROMISC) { 1477 rxcfg |= RL_RXCFG_RX_ALLPHYS; 1478 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1479 } else { 1480 rxcfg &= ~RL_RXCFG_RX_ALLPHYS; 1481 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1482 } 1483 1484 /* 1485 * Set capture broadcast bit to capture broadcast frames. 1486 */ 1487 if (ifp->if_flags & IFF_BROADCAST) { 1488 rxcfg |= RL_RXCFG_RX_BROAD; 1489 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1490 } else { 1491 rxcfg &= ~RL_RXCFG_RX_BROAD; 1492 CSR_WRITE_4(sc, RL_RXCFG, rxcfg); 1493 } 1494 1495 /* 1496 * Program the multicast filter, if necessary. 1497 */ 1498 rl_setmulti(sc); 1499 1500 #ifdef DEVICE_POLLING 1501 /* 1502 * Only enable interrupts if we are polling, keep them off otherwise. 1503 */ 1504 if (ifp->if_flags & IFF_POLLING) 1505 CSR_WRITE_2(sc, RL_IMR, 0); 1506 else 1507 #endif /* DEVICE_POLLING */ 1508 /* 1509 * Enable interrupts. 1510 */ 1511 CSR_WRITE_2(sc, RL_IMR, RL_INTRS); 1512 1513 /* Set initial TX threshold */ 1514 sc->rl_txthresh = RL_TX_THRESH_INIT; 1515 1516 /* Start RX/TX process. */ 1517 CSR_WRITE_4(sc, RL_MISSEDPKT, 0); 1518 1519 /* Enable receiver and transmitter. */ 1520 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 1521 1522 mii_mediachg(mii); 1523 1524 CSR_WRITE_1(sc, RL_CFG1, RL_CFG1_DRVLOAD|RL_CFG1_FULLDUPLEX); 1525 1526 ifp->if_flags |= IFF_RUNNING; 1527 ifp->if_flags &= ~IFF_OACTIVE; 1528 1529 callout_reset(&sc->rl_stat_timer, hz, rl_tick, sc); 1530 } 1531 1532 /* 1533 * Set media options. 1534 */ 1535 static int 1536 rl_ifmedia_upd(struct ifnet *ifp) 1537 { 1538 struct rl_softc *sc; 1539 struct mii_data *mii; 1540 1541 sc = ifp->if_softc; 1542 mii = device_get_softc(sc->rl_miibus); 1543 mii_mediachg(mii); 1544 1545 return(0); 1546 } 1547 1548 /* 1549 * Report current media status. 1550 */ 1551 static void 1552 rl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 1553 { 1554 struct rl_softc *sc = ifp->if_softc; 1555 struct mii_data *mii = device_get_softc(sc->rl_miibus); 1556 1557 mii_pollstat(mii); 1558 ifmr->ifm_active = mii->mii_media_active; 1559 ifmr->ifm_status = mii->mii_media_status; 1560 } 1561 1562 static int 1563 rl_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 1564 { 1565 struct rl_softc *sc = ifp->if_softc; 1566 struct ifreq *ifr = (struct ifreq *) data; 1567 struct mii_data *mii; 1568 int error = 0; 1569 1570 switch (command) { 1571 case SIOCSIFFLAGS: 1572 if (ifp->if_flags & IFF_UP) { 1573 rl_init(sc); 1574 } else { 1575 if (ifp->if_flags & IFF_RUNNING) 1576 rl_stop(sc); 1577 } 1578 error = 0; 1579 break; 1580 case SIOCADDMULTI: 1581 case SIOCDELMULTI: 1582 rl_setmulti(sc); 1583 error = 0; 1584 break; 1585 case SIOCGIFMEDIA: 1586 case SIOCSIFMEDIA: 1587 mii = device_get_softc(sc->rl_miibus); 1588 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1589 break; 1590 case SIOCSIFCAP: 1591 break; 1592 default: 1593 error = ether_ioctl(ifp, command, data); 1594 break; 1595 } 1596 1597 return(error); 1598 } 1599 1600 static void 1601 rl_watchdog(struct ifnet *ifp) 1602 { 1603 struct rl_softc *sc = ifp->if_softc; 1604 1605 device_printf(sc->rl_dev, "watchdog timeout\n"); 1606 1607 ifp->if_oerrors++; 1608 1609 rl_txeof(sc); 1610 rl_rxeof(sc); 1611 rl_init(sc); 1612 } 1613 1614 /* 1615 * Stop the adapter and free any mbufs allocated to the 1616 * RX and TX lists. 1617 */ 1618 static void 1619 rl_stop(struct rl_softc *sc) 1620 { 1621 struct ifnet *ifp = &sc->arpcom.ac_if; 1622 int i; 1623 1624 ifp->if_timer = 0; 1625 1626 callout_stop(&sc->rl_stat_timer); 1627 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1628 1629 CSR_WRITE_1(sc, RL_COMMAND, 0x00); 1630 CSR_WRITE_2(sc, RL_IMR, 0x0000); 1631 bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap); 1632 1633 /* 1634 * Free the TX list buffers. 1635 */ 1636 for (i = 0; i < RL_TX_LIST_CNT; i++) { 1637 if (sc->rl_cdata.rl_tx_chain[i] != NULL) { 1638 bus_dmamap_unload(sc->rl_tag, 1639 sc->rl_cdata.rl_tx_dmamap[i]); 1640 bus_dmamap_destroy(sc->rl_tag, 1641 sc->rl_cdata.rl_tx_dmamap[i]); 1642 m_freem(sc->rl_cdata.rl_tx_chain[i]); 1643 sc->rl_cdata.rl_tx_chain[i] = NULL; 1644 CSR_WRITE_4(sc, RL_TXADDR0 + (i * sizeof(uint32_t)), 1645 0x0000000); 1646 } 1647 } 1648 } 1649 1650 /* 1651 * Stop all chip I/O so that the kernel's probe routines don't 1652 * get confused by errant DMAs when rebooting. 1653 */ 1654 static void 1655 rl_shutdown(device_t dev) 1656 { 1657 struct rl_softc *sc; 1658 1659 sc = device_get_softc(dev); 1660 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1661 rl_stop(sc); 1662 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1663 } 1664 1665 /* 1666 * Device suspend routine. Stop the interface and save some PCI 1667 * settings in case the BIOS doesn't restore them properly on 1668 * resume. 1669 */ 1670 static int 1671 rl_suspend(device_t dev) 1672 { 1673 struct rl_softc *sc = device_get_softc(dev); 1674 int i; 1675 1676 lwkt_serialize_enter(sc->arpcom.ac_if.if_serializer); 1677 rl_stop(sc); 1678 1679 for (i = 0; i < 5; i++) 1680 sc->saved_maps[i] = pci_read_config(dev, PCIR_BAR(i), 4); 1681 sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4); 1682 sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1); 1683 sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1); 1684 sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1); 1685 1686 sc->suspended = 1; 1687 1688 lwkt_serialize_exit(sc->arpcom.ac_if.if_serializer); 1689 return (0); 1690 } 1691 1692 /* 1693 * Device resume routine. Restore some PCI settings in case the BIOS 1694 * doesn't, re-enable busmastering, and restart the interface if 1695 * appropriate. 1696 */ 1697 static int 1698 rl_resume(device_t dev) 1699 { 1700 struct rl_softc *sc = device_get_softc(dev); 1701 struct ifnet *ifp = &sc->arpcom.ac_if; 1702 int i; 1703 1704 lwkt_serialize_enter(ifp->if_serializer); 1705 1706 /* better way to do this? */ 1707 for (i = 0; i < 5; i++) 1708 pci_write_config(dev, PCIR_BAR(i), sc->saved_maps[i], 4); 1709 pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4); 1710 pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1); 1711 pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1); 1712 pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1); 1713 1714 /* reenable busmastering */ 1715 pci_enable_busmaster(dev); 1716 pci_enable_io(dev, RL_RES); 1717 1718 /* reinitialize interface if necessary */ 1719 if (ifp->if_flags & IFF_UP) 1720 rl_init(sc); 1721 1722 sc->suspended = 0; 1723 lwkt_serialize_exit(ifp->if_serializer); 1724 return (0); 1725 } 1726