1 /* 2 * Copyright (c) 1997, 1998 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/pci/if_rlreg.h,v 1.14.2.5 2003/03/02 20:58:54 dan Exp $ 33 * $DragonFly: src/sys/dev/netif/rl/if_rlreg.h,v 1.4 2004/11/10 18:30:13 joerg Exp $ 34 */ 35 36 /* 37 * RealTek 8129/8139 register offsets 38 */ 39 #define RL_IDR0 0x0000 /* ID register 0 (station addr) */ 40 #define RL_IDR1 0x0001 /* Must use 32-bit accesses (?) */ 41 #define RL_IDR2 0x0002 42 #define RL_IDR3 0x0003 43 #define RL_IDR4 0x0004 44 #define RL_IDR5 0x0005 45 /* 0006-0007 reserved */ 46 #define RL_MAR0 0x0008 /* Multicast hash table */ 47 #define RL_MAR1 0x0009 48 #define RL_MAR2 0x000A 49 #define RL_MAR3 0x000B 50 #define RL_MAR4 0x000C 51 #define RL_MAR5 0x000D 52 #define RL_MAR6 0x000E 53 #define RL_MAR7 0x000F 54 55 #define RL_TXSTAT0 0x0010 /* status of TX descriptor 0 */ 56 #define RL_TXSTAT1 0x0014 /* status of TX descriptor 1 */ 57 #define RL_TXSTAT2 0x0018 /* status of TX descriptor 2 */ 58 #define RL_TXSTAT3 0x001C /* status of TX descriptor 3 */ 59 60 #define RL_TXADDR0 0x0020 /* address of TX descriptor 0 */ 61 #define RL_TXADDR1 0x0024 /* address of TX descriptor 1 */ 62 #define RL_TXADDR2 0x0028 /* address of TX descriptor 2 */ 63 #define RL_TXADDR3 0x002C /* address of TX descriptor 3 */ 64 65 #define RL_RXADDR 0x0030 /* RX ring start address */ 66 #define RL_RX_EARLY_BYTES 0x0034 /* RX early byte count */ 67 #define RL_RX_EARLY_STAT 0x0036 /* RX early status */ 68 #define RL_COMMAND 0x0037 /* command register */ 69 #define RL_CURRXADDR 0x0038 /* current address of packet read */ 70 #define RL_CURRXBUF 0x003A /* current RX buffer address */ 71 #define RL_IMR 0x003C /* interrupt mask register */ 72 #define RL_ISR 0x003E /* interrupt status register */ 73 #define RL_TXCFG 0x0040 /* transmit config */ 74 #define RL_RXCFG 0x0044 /* receive config */ 75 #define RL_TIMERCNT 0x0048 /* timer count register */ 76 #define RL_MISSEDPKT 0x004C /* missed packet counter */ 77 #define RL_EECMD 0x0050 /* EEPROM command register */ 78 #define RL_CFG0 0x0051 /* config register #0 */ 79 #define RL_CFG1 0x0052 /* config register #1 */ 80 /* 0053-0057 reserved */ 81 #define RL_MEDIASTAT 0x0058 /* media status register (8139) */ 82 /* 0059-005A reserved */ 83 #define RL_MII 0x005A /* 8129 chip only */ 84 #define RL_HALTCLK 0x005B 85 #define RL_MULTIINTR 0x005C /* multiple interrupt */ 86 #define RL_PCIREV 0x005E /* PCI revision value */ 87 /* 005F reserved */ 88 #define RL_TXSTAT_ALL 0x0060 /* TX status of all descriptors */ 89 90 /* Direct PHY access registers only available on 8139 */ 91 #define RL_BMCR 0x0062 /* PHY basic mode control */ 92 #define RL_BMSR 0x0064 /* PHY basic mode status */ 93 #define RL_ANAR 0x0066 /* PHY autoneg advert */ 94 #define RL_LPAR 0x0068 /* PHY link partner ability */ 95 #define RL_ANER 0x006A /* PHY autoneg expansion */ 96 97 #define RL_DISCCNT 0x006C /* disconnect counter */ 98 #define RL_FALSECAR 0x006E /* false carrier counter */ 99 #define RL_NWAYTST 0x0070 /* NWAY test register */ 100 #define RL_RX_ER 0x0072 /* RX_ER counter */ 101 #define RL_CSCFG 0x0074 /* CS configuration register */ 102 103 104 /* 105 * TX config register bits 106 */ 107 #define RL_TXCFG_CLRABRT 0x00000001 /* retransmit aborted pkt */ 108 #define RL_TXCFG_MAXDMA 0x00000700 /* max DMA burst size */ 109 #define RL_TXCFG_CRCAPPEND 0x00010000 /* CRC append (0 = yes) */ 110 #define RL_TXCFG_LOOPBKTST 0x00060000 /* loopback test */ 111 #define RL_TXCFG_IFG 0x03000000 /* interframe gap */ 112 113 #define RL_TXDMA_16BYTES 0x00000000 114 #define RL_TXDMA_32BYTES 0x00000100 115 #define RL_TXDMA_64BYTES 0x00000200 116 #define RL_TXDMA_128BYTES 0x00000300 117 #define RL_TXDMA_256BYTES 0x00000400 118 #define RL_TXDMA_512BYTES 0x00000500 119 #define RL_TXDMA_1024BYTES 0x00000600 120 #define RL_TXDMA_2048BYTES 0x00000700 121 122 /* 123 * Transmit descriptor status register bits. 124 */ 125 #define RL_TXSTAT_LENMASK 0x00001FFF 126 #define RL_TXSTAT_OWN 0x00002000 127 #define RL_TXSTAT_TX_UNDERRUN 0x00004000 128 #define RL_TXSTAT_TX_OK 0x00008000 129 #define RL_TXSTAT_EARLY_THRESH 0x003F0000 130 #define RL_TXSTAT_COLLCNT 0x0F000000 131 #define RL_TXSTAT_CARR_HBEAT 0x10000000 132 #define RL_TXSTAT_OUTOFWIN 0x20000000 133 #define RL_TXSTAT_TXABRT 0x40000000 134 #define RL_TXSTAT_CARRLOSS 0x80000000 135 136 /* 137 * Interrupt status register bits. 138 */ 139 #define RL_ISR_RX_OK 0x0001 140 #define RL_ISR_RX_ERR 0x0002 141 #define RL_ISR_TX_OK 0x0004 142 #define RL_ISR_TX_ERR 0x0008 143 #define RL_ISR_RX_OVERRUN 0x0010 144 #define RL_ISR_PKT_UNDERRUN 0x0020 145 #define RL_ISR_FIFO_OFLOW 0x0040 /* 8139 only */ 146 #define RL_ISR_PCS_TIMEOUT 0x4000 /* 8129 only */ 147 #define RL_ISR_SYSTEM_ERR 0x8000 148 149 #define RL_INTRS \ 150 (RL_ISR_TX_OK|RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_TX_ERR| \ 151 RL_ISR_RX_OVERRUN|RL_ISR_PKT_UNDERRUN|RL_ISR_FIFO_OFLOW| \ 152 RL_ISR_PCS_TIMEOUT|RL_ISR_SYSTEM_ERR) 153 154 /* 155 * Media status register. (8139 only) 156 */ 157 #define RL_MEDIASTAT_RXPAUSE 0x01 158 #define RL_MEDIASTAT_TXPAUSE 0x02 159 #define RL_MEDIASTAT_LINK 0x04 160 #define RL_MEDIASTAT_SPEED10 0x08 161 #define RL_MEDIASTAT_RXFLOWCTL 0x40 /* duplex mode */ 162 #define RL_MEDIASTAT_TXFLOWCTL 0x80 /* duplex mode */ 163 164 /* 165 * Receive config register. 166 */ 167 #define RL_RXCFG_RX_ALLPHYS 0x00000001 /* accept all nodes */ 168 #define RL_RXCFG_RX_INDIV 0x00000002 /* match filter */ 169 #define RL_RXCFG_RX_MULTI 0x00000004 /* accept all multicast */ 170 #define RL_RXCFG_RX_BROAD 0x00000008 /* accept all broadcast */ 171 #define RL_RXCFG_RX_RUNT 0x00000010 172 #define RL_RXCFG_RX_ERRPKT 0x00000020 173 #define RL_RXCFG_WRAP 0x00000080 174 #define RL_RXCFG_MAXDMA 0x00000700 175 #define RL_RXCFG_BUFSZ 0x00001800 176 #define RL_RXCFG_FIFOTHRESH 0x0000E000 177 #define RL_RXCFG_EARLYTHRESH 0x07000000 178 179 #define RL_RXDMA_16BYTES 0x00000000 180 #define RL_RXDMA_32BYTES 0x00000100 181 #define RL_RXDMA_64BYTES 0x00000200 182 #define RL_RXDMA_128BYTES 0x00000300 183 #define RL_RXDMA_256BYTES 0x00000400 184 #define RL_RXDMA_512BYTES 0x00000500 185 #define RL_RXDMA_1024BYTES 0x00000600 186 #define RL_RXDMA_UNLIMITED 0x00000700 187 188 #define RL_RXBUF_8 0x00000000 189 #define RL_RXBUF_16 0x00000800 190 #define RL_RXBUF_32 0x00001000 191 #define RL_RXBUF_64 0x00001800 192 193 #define RL_RXFIFO_16BYTES 0x00000000 194 #define RL_RXFIFO_32BYTES 0x00002000 195 #define RL_RXFIFO_64BYTES 0x00004000 196 #define RL_RXFIFO_128BYTES 0x00006000 197 #define RL_RXFIFO_256BYTES 0x00008000 198 #define RL_RXFIFO_512BYTES 0x0000A000 199 #define RL_RXFIFO_1024BYTES 0x0000C000 200 #define RL_RXFIFO_NOTHRESH 0x0000E000 201 202 /* 203 * Bits in RX status header (included with RX'ed packet 204 * in ring buffer). 205 */ 206 #define RL_RXSTAT_RXOK 0x00000001 207 #define RL_RXSTAT_ALIGNERR 0x00000002 208 #define RL_RXSTAT_CRCERR 0x00000004 209 #define RL_RXSTAT_GIANT 0x00000008 210 #define RL_RXSTAT_RUNT 0x00000010 211 #define RL_RXSTAT_BADSYM 0x00000020 212 #define RL_RXSTAT_BROAD 0x00002000 213 #define RL_RXSTAT_INDIV 0x00004000 214 #define RL_RXSTAT_MULTI 0x00008000 215 #define RL_RXSTAT_LENMASK 0xFFFF0000 216 217 #define RL_RXSTAT_UNFINISHED 0xFFF0 /* DMA still in progress */ 218 /* 219 * Command register. 220 */ 221 #define RL_CMD_EMPTY_RXBUF 0x0001 222 #define RL_CMD_TX_ENB 0x0004 223 #define RL_CMD_RX_ENB 0x0008 224 #define RL_CMD_RESET 0x0010 225 226 /* 227 * EEPROM control register 228 */ 229 #define RL_EE_DATAOUT 0x01 /* Data out */ 230 #define RL_EE_DATAIN 0x02 /* Data in */ 231 #define RL_EE_CLK 0x04 /* clock */ 232 #define RL_EE_SEL 0x08 /* chip select */ 233 #define RL_EE_MODE (0x40|0x80) 234 235 #define RL_EEMODE_OFF 0x00 236 #define RL_EEMODE_AUTOLOAD 0x40 237 #define RL_EEMODE_PROGRAM 0x80 238 #define RL_EEMODE_WRITECFG (0x80|0x40) 239 240 /* 9346 EEPROM commands */ 241 #define RL_EECMD_WRITE 0x140 242 #define RL_EECMD_READ_6BIT 0x180 243 #define RL_EECMD_READ_8BIT 0x600 244 #define RL_EECMD_ERASE 0x1c0 245 246 #define RL_EE_ID 0x00 247 #define RL_EE_PCI_VID 0x01 248 #define RL_EE_PCI_DID 0x02 249 /* Location of station address inside EEPROM */ 250 #define RL_EE_EADDR 0x07 251 252 /* 253 * MII register (8129 only) 254 */ 255 #define RL_MII_CLK 0x01 256 #define RL_MII_DATAIN 0x02 257 #define RL_MII_DATAOUT 0x04 258 #define RL_MII_DIR 0x80 /* 0 == input, 1 == output */ 259 260 /* 261 * Config 0 register 262 */ 263 #define RL_CFG0_ROM0 0x01 264 #define RL_CFG0_ROM1 0x02 265 #define RL_CFG0_ROM2 0x04 266 #define RL_CFG0_PL0 0x08 267 #define RL_CFG0_PL1 0x10 268 #define RL_CFG0_10MBPS 0x20 /* 10 Mbps internal mode */ 269 #define RL_CFG0_PCS 0x40 270 #define RL_CFG0_SCR 0x80 271 272 /* 273 * Config 1 register 274 */ 275 #define RL_CFG1_PWRDWN 0x01 276 #define RL_CFG1_SLEEP 0x02 277 #define RL_CFG1_IOMAP 0x04 278 #define RL_CFG1_MEMMAP 0x08 279 #define RL_CFG1_RSVD 0x10 280 #define RL_CFG1_DRVLOAD 0x20 281 #define RL_CFG1_LED0 0x40 282 #define RL_CFG1_FULLDUPLEX 0x40 /* 8129 only */ 283 #define RL_CFG1_LED1 0x80 284 285 /* 286 * The RealTek doesn't use a fragment-based descriptor mechanism. 287 * Instead, there are only four register sets, each or which represents 288 * one 'descriptor.' Basically, each TX descriptor is just a contiguous 289 * packet buffer (32-bit aligned!) and we place the buffer addresses in 290 * the registers so the chip knows where they are. 291 * 292 * We can sort of kludge together the same kind of buffer management 293 * used in previous drivers, but we have to do buffer copies almost all 294 * the time, so it doesn't really buy us much. 295 * 296 * For reception, there's just one large buffer where the chip stores 297 * all received packets. 298 */ 299 300 #define RL_RX_BUF_SZ RL_RXBUF_64 301 #define RL_RXBUFLEN (1 << ((RL_RX_BUF_SZ >> 11) + 13)) 302 #define RL_TX_LIST_CNT 4 303 #define RL_MIN_FRAMELEN 60 304 #define RL_TXTHRESH(x) ((x) << 11) 305 #define RL_TX_THRESH_INIT 96 306 #define RL_RX_FIFOTHRESH RL_RXFIFO_256BYTES 307 #define RL_RX_MAXDMA RL_RXDMA_1024BYTES 308 #define RL_TX_MAXDMA RL_TXDMA_2048BYTES 309 310 #define RL_RXCFG_CONFIG (RL_RX_FIFOTHRESH|RL_RX_MAXDMA|RL_RX_BUF_SZ) 311 #define RL_TXCFG_CONFIG (RL_TXCFG_IFG|RL_TX_MAXDMA) 312 313 #define RL_ETHER_ALIGN 2 314 315 struct rl_chain_data { 316 uint16_t cur_rx; 317 caddr_t rl_rx_buf; 318 caddr_t rl_rx_buf_ptr; 319 bus_dmamap_t rl_rx_dmamap; 320 321 struct mbuf *rl_tx_chain[RL_TX_LIST_CNT]; 322 bus_dmamap_t rl_tx_dmamap[RL_TX_LIST_CNT]; 323 uint8_t last_tx; 324 uint8_t cur_tx; 325 }; 326 327 #define RL_INC(x) (x = (x + 1) % RL_TX_LIST_CNT) 328 #define RL_CUR_TXADDR(x) ((x->rl_cdata.cur_tx * 4) + RL_TXADDR0) 329 #define RL_CUR_TXSTAT(x) ((x->rl_cdata.cur_tx * 4) + RL_TXSTAT0) 330 #define RL_CUR_TXMBUF(x) (x->rl_cdata.rl_tx_chain[x->rl_cdata.cur_tx]) 331 #define RL_CUR_DMAMAP(x) (x->rl_cdata.rl_tx_dmamap[x->rl_cdata.cur_tx]) 332 #define RL_LAST_TXADDR(x) ((x->rl_cdata.last_tx * 4) + RL_TXADDR0) 333 #define RL_LAST_TXSTAT(x) ((x->rl_cdata.last_tx * 4) + RL_TXSTAT0) 334 #define RL_LAST_TXMBUF(x) (x->rl_cdata.rl_tx_chain[x->rl_cdata.last_tx]) 335 #define RL_LAST_DMAMAP(x) (x->rl_cdata.rl_tx_dmamap[x->rl_cdata.last_tx]) 336 337 struct rl_mii_frame { 338 uint8_t mii_stdelim; 339 uint8_t mii_opcode; 340 uint8_t mii_phyaddr; 341 uint8_t mii_regaddr; 342 uint8_t mii_turnaround; 343 uint16_t mii_data; 344 }; 345 346 /* 347 * MII constants 348 */ 349 #define RL_MII_STARTDELIM 0x01 350 #define RL_MII_READOP 0x02 351 #define RL_MII_WRITEOP 0x01 352 #define RL_MII_TURNAROUND 0x02 353 354 #define RL_8129 1 355 #define RL_8139 2 356 357 struct rl_softc { 358 struct arpcom arpcom; /* interface info */ 359 device_t rl_dev; 360 bus_space_handle_t rl_bhandle; /* bus space handle */ 361 bus_space_tag_t rl_btag; /* bus space tag */ 362 struct resource *rl_res; 363 struct resource *rl_irq; 364 void *rl_intrhand; 365 device_t rl_miibus; 366 bus_dma_tag_t rl_parent_tag; 367 bus_dma_tag_t rl_tag; 368 uint8_t rl_type; 369 int rl_eecmd_read; 370 uint8_t rl_stats_no_timeout; 371 int rl_txthresh; 372 struct rl_chain_data rl_cdata; 373 struct callout rl_stat_timer; 374 int suspended; /* 0 = normal 1 = suspended */ 375 #ifdef DEVICE_POLLING 376 int rxcycles; 377 #endif /* DEVICE_POLLING */ 378 379 uint32_t saved_maps[5]; /* pci data */ 380 uint32_t saved_biosaddr; 381 uint8_t saved_intline; 382 uint8_t saved_cachelnsz; 383 uint8_t saved_lattimer; 384 }; 385 386 /* 387 * register space access macros 388 */ 389 #define CSR_WRITE_STREAM_4(sc, reg, val) \ 390 bus_space_write_stream_4(sc->rl_btag, sc->rl_bhandle, reg, val) 391 #define CSR_WRITE_4(sc, reg, val) \ 392 bus_space_write_4(sc->rl_btag, sc->rl_bhandle, reg, val) 393 #define CSR_WRITE_2(sc, reg, val) \ 394 bus_space_write_2(sc->rl_btag, sc->rl_bhandle, reg, val) 395 #define CSR_WRITE_1(sc, reg, val) \ 396 bus_space_write_1(sc->rl_btag, sc->rl_bhandle, reg, val) 397 398 #define CSR_READ_4(sc, reg) \ 399 bus_space_read_4(sc->rl_btag, sc->rl_bhandle, reg) 400 #define CSR_READ_2(sc, reg) \ 401 bus_space_read_2(sc->rl_btag, sc->rl_bhandle, reg) 402 #define CSR_READ_1(sc, reg) \ 403 bus_space_read_1(sc->rl_btag, sc->rl_bhandle, reg) 404 405 #define RL_TIMEOUT 1000 406 407 /* 408 * General constants that are fun to know. 409 * 410 * RealTek PCI vendor ID 411 */ 412 #define RT_VENDORID 0x10EC 413 414 /* 415 * RealTek chip device IDs. 416 */ 417 #define RT_DEVICEID_8129 0x8129 418 #define RT_DEVICEID_8138 0x8138 419 #define RT_DEVICEID_8139 0x8139 420 421 /* 422 * Accton PCI vendor ID 423 */ 424 #define ACCTON_VENDORID 0x1113 425 426 /* 427 * Accton MPX 5030/5038 device ID. 428 */ 429 #define ACCTON_DEVICEID_5030 0x1211 430 431 /* 432 * Nortel PCI vendor ID 433 */ 434 #define NORTEL_VENDORID 0x126C 435 436 /* 437 * Delta Electronics Vendor ID. 438 */ 439 #define DELTA_VENDORID 0x1500 440 441 /* 442 * Delta device IDs. 443 */ 444 #define DELTA_DEVICEID_8139 0x1360 445 446 /* 447 * Addtron vendor ID. 448 */ 449 #define ADDTRON_VENDORID 0x4033 450 451 /* 452 * Addtron device IDs. 453 */ 454 #define ADDTRON_DEVICEID_8139 0x1360 455 456 /* 457 * D-Link vendor ID. 458 */ 459 #define DLINK_VENDORID 0x1186 460 461 /* 462 * D-Link DFE-530TX+ device ID 463 */ 464 #define DLINK_DEVICEID_530TXPLUS 0x1300 465 466 /* 467 * D-Link DFE-690TXD device ID 468 */ 469 #define DLINK_DEVICEID_690TXD 0x1340 470 471 /* 472 * Corega K.K vendor ID 473 */ 474 #define COREGA_VENDORID 0x1259 475 476 /* 477 * Corega FEther CB-TXD device ID 478 */ 479 #define COREGA_DEVICEID_FETHERCBTXD 0xa117 480 481 /* 482 * Corega FEtherII CB-TXD device ID 483 */ 484 #define COREGA_DEVICEID_FETHERIICBTXD 0xa11e 485 486 /* 487 * Corega CG-LAPCIGT device ID 488 */ 489 #define COREGA_DEVICEID_CGLAPCIGT 0xc107 490 491 /* 492 * Peppercon vendor ID. 493 */ 494 #define PEPPERCON_VENDORID 0x1743 495 496 /* 497 * Peppercon AG ROL/F device ID. 498 */ 499 #define PEPPERCON_DEVICEID_ROLF 0x8139 500 501 /* 502 * Planex Communications, Inc. vendor ID 503 */ 504 #define PLANEX_VENDORID 0x14ea 505 506 /* 507 * Planex FNW-3800-TX device ID 508 */ 509 #define PLANEX_DEVICEID_FNW3800TX 0xab07 510 511 /* 512 * PCI low memory base and low I/O base register, and 513 * other PCI registers. 514 */ 515 516 #define RL_PCI_VENDOR_ID 0x00 517 #define RL_PCI_DEVICE_ID 0x02 518 #define RL_PCI_COMMAND 0x04 519 #define RL_PCI_STATUS 0x06 520 #define RL_PCI_CLASSCODE 0x09 521 #define RL_PCI_LATENCY_TIMER 0x0D 522 #define RL_PCI_HEADER_TYPE 0x0E 523 #define RL_PCI_LOIO 0x10 524 #define RL_PCI_LOMEM 0x14 525 #define RL_PCI_BIOSROM 0x30 526 #define RL_PCI_INTLINE 0x3C 527 #define RL_PCI_INTPIN 0x3D 528 #define RL_PCI_MINGNT 0x3E 529 #define RL_PCI_MINLAT 0x0F 530 #define RL_PCI_RESETOPT 0x48 531 #define RL_PCI_EEPROM_DATA 0x4C 532 533 #define RL_PCI_CAPID 0x50 /* 8 bits */ 534 #define RL_PCI_NEXTPTR 0x51 /* 8 bits */ 535 #define RL_PCI_PWRMGMTCAP 0x52 /* 16 bits */ 536 #define RL_PCI_PWRMGMTCTRL 0x54 /* 16 bits */ 537 538 #define RL_PSTATE_MASK 0x0003 539 #define RL_PSTATE_D0 0x0000 540 #define RL_PSTATE_D1 0x0002 541 #define RL_PSTATE_D2 0x0002 542 #define RL_PSTATE_D3 0x0003 543 #define RL_PME_EN 0x0010 544 #define RL_PME_STATUS 0x8000 545