1 /* 2 * Copyright (c) 1997, 1998, 1999, 2000 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $ 33 * $DragonFly: src/sys/dev/netif/sk/if_sk.c,v 1.3 2003/07/26 21:56:10 rob Exp $ 34 * 35 * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $ 36 */ 37 38 /* 39 * SysKonnect SK-NET gigabit ethernet driver for FreeBSD. Supports 40 * the SK-984x series adapters, both single port and dual port. 41 * References: 42 * The XaQti XMAC II datasheet, 43 * http://www.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf 44 * The SysKonnect GEnesis manual, http://www.syskonnect.com 45 * 46 * Note: XaQti has been aquired by Vitesse, and Vitesse does not have the 47 * XMAC II datasheet online. I have put my copy at people.freebsd.org as a 48 * convenience to others until Vitesse corrects this problem: 49 * 50 * http://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf 51 * 52 * Written by Bill Paul <wpaul@ee.columbia.edu> 53 * Department of Electrical Engineering 54 * Columbia University, New York City 55 */ 56 57 /* 58 * The SysKonnect gigabit ethernet adapters consist of two main 59 * components: the SysKonnect GEnesis controller chip and the XaQti Corp. 60 * XMAC II gigabit ethernet MAC. The XMAC provides all of the MAC 61 * components and a PHY while the GEnesis controller provides a PCI 62 * interface with DMA support. Each card may have between 512K and 63 * 2MB of SRAM on board depending on the configuration. 64 * 65 * The SysKonnect GEnesis controller can have either one or two XMAC 66 * chips connected to it, allowing single or dual port NIC configurations. 67 * SysKonnect has the distinction of being the only vendor on the market 68 * with a dual port gigabit ethernet NIC. The GEnesis provides dual FIFOs, 69 * dual DMA queues, packet/MAC/transmit arbiters and direct access to the 70 * XMAC registers. This driver takes advantage of these features to allow 71 * both XMACs to operate as independent interfaces. 72 */ 73 74 #include <sys/param.h> 75 #include <sys/systm.h> 76 #include <sys/sockio.h> 77 #include <sys/mbuf.h> 78 #include <sys/malloc.h> 79 #include <sys/kernel.h> 80 #include <sys/socket.h> 81 #include <sys/queue.h> 82 83 #include <net/if.h> 84 #include <net/if_arp.h> 85 #include <net/ethernet.h> 86 #include <net/if_dl.h> 87 #include <net/if_media.h> 88 89 #include <net/bpf.h> 90 91 #include <vm/vm.h> /* for vtophys */ 92 #include <vm/pmap.h> /* for vtophys */ 93 #include <machine/clock.h> /* for DELAY */ 94 #include <machine/bus_pio.h> 95 #include <machine/bus_memio.h> 96 #include <machine/bus.h> 97 #include <machine/resource.h> 98 #include <sys/bus.h> 99 #include <sys/rman.h> 100 101 #include <dev/mii/mii.h> 102 #include <dev/mii/miivar.h> 103 #include <dev/mii/brgphyreg.h> 104 105 #include <pci/pcireg.h> 106 #include <pci/pcivar.h> 107 108 #define SK_USEIOSPACE 109 110 #include <pci/if_skreg.h> 111 #include <pci/xmaciireg.h> 112 113 /* "controller miibus0" required. See GENERIC if you get errors here. */ 114 #include "miibus_if.h" 115 116 static struct sk_type sk_devs[] = { 117 { SK_VENDORID, SK_DEVICEID_GE, "SysKonnect Gigabit Ethernet" }, 118 { 0, 0, NULL } 119 }; 120 121 static int sk_probe __P((device_t)); 122 static int sk_attach __P((device_t)); 123 static int sk_detach __P((device_t)); 124 static int sk_detach_xmac __P((device_t)); 125 static int sk_probe_xmac __P((device_t)); 126 static int sk_attach_xmac __P((device_t)); 127 static void sk_tick __P((void *)); 128 static void sk_intr __P((void *)); 129 static void sk_intr_xmac __P((struct sk_if_softc *)); 130 static void sk_intr_bcom __P((struct sk_if_softc *)); 131 static void sk_rxeof __P((struct sk_if_softc *)); 132 static void sk_txeof __P((struct sk_if_softc *)); 133 static int sk_encap __P((struct sk_if_softc *, struct mbuf *, 134 u_int32_t *)); 135 static void sk_start __P((struct ifnet *)); 136 static int sk_ioctl __P((struct ifnet *, u_long, caddr_t)); 137 static void sk_init __P((void *)); 138 static void sk_init_xmac __P((struct sk_if_softc *)); 139 static void sk_stop __P((struct sk_if_softc *)); 140 static void sk_watchdog __P((struct ifnet *)); 141 static void sk_shutdown __P((device_t)); 142 static int sk_ifmedia_upd __P((struct ifnet *)); 143 static void sk_ifmedia_sts __P((struct ifnet *, struct ifmediareq *)); 144 static void sk_reset __P((struct sk_softc *)); 145 static int sk_newbuf __P((struct sk_if_softc *, 146 struct sk_chain *, struct mbuf *)); 147 static int sk_alloc_jumbo_mem __P((struct sk_if_softc *)); 148 static void *sk_jalloc __P((struct sk_if_softc *)); 149 static void sk_jfree __P((caddr_t, u_int)); 150 static void sk_jref __P((caddr_t, u_int)); 151 static int sk_init_rx_ring __P((struct sk_if_softc *)); 152 static void sk_init_tx_ring __P((struct sk_if_softc *)); 153 static u_int32_t sk_win_read_4 __P((struct sk_softc *, int)); 154 static u_int16_t sk_win_read_2 __P((struct sk_softc *, int)); 155 static u_int8_t sk_win_read_1 __P((struct sk_softc *, int)); 156 static void sk_win_write_4 __P((struct sk_softc *, int, u_int32_t)); 157 static void sk_win_write_2 __P((struct sk_softc *, int, u_int32_t)); 158 static void sk_win_write_1 __P((struct sk_softc *, int, u_int32_t)); 159 static u_int8_t sk_vpd_readbyte __P((struct sk_softc *, int)); 160 static void sk_vpd_read_res __P((struct sk_softc *, 161 struct vpd_res *, int)); 162 static void sk_vpd_read __P((struct sk_softc *)); 163 164 static int sk_miibus_readreg __P((device_t, int, int)); 165 static int sk_miibus_writereg __P((device_t, int, int, int)); 166 static void sk_miibus_statchg __P((device_t)); 167 168 static u_int32_t sk_calchash __P((caddr_t)); 169 static void sk_setfilt __P((struct sk_if_softc *, caddr_t, int)); 170 static void sk_setmulti __P((struct sk_if_softc *)); 171 172 #ifdef SK_USEIOSPACE 173 #define SK_RES SYS_RES_IOPORT 174 #define SK_RID SK_PCI_LOIO 175 #else 176 #define SK_RES SYS_RES_MEMORY 177 #define SK_RID SK_PCI_LOMEM 178 #endif 179 180 /* 181 * Note that we have newbus methods for both the GEnesis controller 182 * itself and the XMAC(s). The XMACs are children of the GEnesis, and 183 * the miibus code is a child of the XMACs. We need to do it this way 184 * so that the miibus drivers can access the PHY registers on the 185 * right PHY. It's not quite what I had in mind, but it's the only 186 * design that achieves the desired effect. 187 */ 188 static device_method_t skc_methods[] = { 189 /* Device interface */ 190 DEVMETHOD(device_probe, sk_probe), 191 DEVMETHOD(device_attach, sk_attach), 192 DEVMETHOD(device_detach, sk_detach), 193 DEVMETHOD(device_shutdown, sk_shutdown), 194 195 /* bus interface */ 196 DEVMETHOD(bus_print_child, bus_generic_print_child), 197 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 198 199 { 0, 0 } 200 }; 201 202 static driver_t skc_driver = { 203 "skc", 204 skc_methods, 205 sizeof(struct sk_softc) 206 }; 207 208 static devclass_t skc_devclass; 209 210 static device_method_t sk_methods[] = { 211 /* Device interface */ 212 DEVMETHOD(device_probe, sk_probe_xmac), 213 DEVMETHOD(device_attach, sk_attach_xmac), 214 DEVMETHOD(device_detach, sk_detach_xmac), 215 DEVMETHOD(device_shutdown, bus_generic_shutdown), 216 217 /* bus interface */ 218 DEVMETHOD(bus_print_child, bus_generic_print_child), 219 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 220 221 /* MII interface */ 222 DEVMETHOD(miibus_readreg, sk_miibus_readreg), 223 DEVMETHOD(miibus_writereg, sk_miibus_writereg), 224 DEVMETHOD(miibus_statchg, sk_miibus_statchg), 225 226 { 0, 0 } 227 }; 228 229 static driver_t sk_driver = { 230 "sk", 231 sk_methods, 232 sizeof(struct sk_if_softc) 233 }; 234 235 static devclass_t sk_devclass; 236 237 DRIVER_MODULE(if_sk, pci, skc_driver, skc_devclass, 0, 0); 238 DRIVER_MODULE(sk, skc, sk_driver, sk_devclass, 0, 0); 239 DRIVER_MODULE(miibus, sk, miibus_driver, miibus_devclass, 0, 0); 240 241 #define SK_SETBIT(sc, reg, x) \ 242 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | x) 243 244 #define SK_CLRBIT(sc, reg, x) \ 245 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~x) 246 247 #define SK_WIN_SETBIT_4(sc, reg, x) \ 248 sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) | x) 249 250 #define SK_WIN_CLRBIT_4(sc, reg, x) \ 251 sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) & ~x) 252 253 #define SK_WIN_SETBIT_2(sc, reg, x) \ 254 sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) | x) 255 256 #define SK_WIN_CLRBIT_2(sc, reg, x) \ 257 sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) & ~x) 258 259 static u_int32_t sk_win_read_4(sc, reg) 260 struct sk_softc *sc; 261 int reg; 262 { 263 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 264 return(CSR_READ_4(sc, SK_WIN_BASE + SK_REG(reg))); 265 } 266 267 static u_int16_t sk_win_read_2(sc, reg) 268 struct sk_softc *sc; 269 int reg; 270 { 271 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 272 return(CSR_READ_2(sc, SK_WIN_BASE + SK_REG(reg))); 273 } 274 275 static u_int8_t sk_win_read_1(sc, reg) 276 struct sk_softc *sc; 277 int reg; 278 { 279 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 280 return(CSR_READ_1(sc, SK_WIN_BASE + SK_REG(reg))); 281 } 282 283 static void sk_win_write_4(sc, reg, val) 284 struct sk_softc *sc; 285 int reg; 286 u_int32_t val; 287 { 288 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 289 CSR_WRITE_4(sc, SK_WIN_BASE + SK_REG(reg), val); 290 return; 291 } 292 293 static void sk_win_write_2(sc, reg, val) 294 struct sk_softc *sc; 295 int reg; 296 u_int32_t val; 297 { 298 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 299 CSR_WRITE_2(sc, SK_WIN_BASE + SK_REG(reg), (u_int32_t)val); 300 return; 301 } 302 303 static void sk_win_write_1(sc, reg, val) 304 struct sk_softc *sc; 305 int reg; 306 u_int32_t val; 307 { 308 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 309 CSR_WRITE_1(sc, SK_WIN_BASE + SK_REG(reg), val); 310 return; 311 } 312 313 /* 314 * The VPD EEPROM contains Vital Product Data, as suggested in 315 * the PCI 2.1 specification. The VPD data is separared into areas 316 * denoted by resource IDs. The SysKonnect VPD contains an ID string 317 * resource (the name of the adapter), a read-only area resource 318 * containing various key/data fields and a read/write area which 319 * can be used to store asset management information or log messages. 320 * We read the ID string and read-only into buffers attached to 321 * the controller softc structure for later use. At the moment, 322 * we only use the ID string during sk_attach(). 323 */ 324 static u_int8_t sk_vpd_readbyte(sc, addr) 325 struct sk_softc *sc; 326 int addr; 327 { 328 int i; 329 330 sk_win_write_2(sc, SK_PCI_REG(SK_PCI_VPD_ADDR), addr); 331 for (i = 0; i < SK_TIMEOUT; i++) { 332 DELAY(1); 333 if (sk_win_read_2(sc, 334 SK_PCI_REG(SK_PCI_VPD_ADDR)) & SK_VPD_FLAG) 335 break; 336 } 337 338 if (i == SK_TIMEOUT) 339 return(0); 340 341 return(sk_win_read_1(sc, SK_PCI_REG(SK_PCI_VPD_DATA))); 342 } 343 344 static void sk_vpd_read_res(sc, res, addr) 345 struct sk_softc *sc; 346 struct vpd_res *res; 347 int addr; 348 { 349 int i; 350 u_int8_t *ptr; 351 352 ptr = (u_int8_t *)res; 353 for (i = 0; i < sizeof(struct vpd_res); i++) 354 ptr[i] = sk_vpd_readbyte(sc, i + addr); 355 356 return; 357 } 358 359 static void sk_vpd_read(sc) 360 struct sk_softc *sc; 361 { 362 int pos = 0, i; 363 struct vpd_res res; 364 365 if (sc->sk_vpd_prodname != NULL) 366 free(sc->sk_vpd_prodname, M_DEVBUF); 367 if (sc->sk_vpd_readonly != NULL) 368 free(sc->sk_vpd_readonly, M_DEVBUF); 369 sc->sk_vpd_prodname = NULL; 370 sc->sk_vpd_readonly = NULL; 371 372 sk_vpd_read_res(sc, &res, pos); 373 374 if (res.vr_id != VPD_RES_ID) { 375 printf("skc%d: bad VPD resource id: expected %x got %x\n", 376 sc->sk_unit, VPD_RES_ID, res.vr_id); 377 return; 378 } 379 380 pos += sizeof(res); 381 sc->sk_vpd_prodname = malloc(res.vr_len + 1, M_DEVBUF, M_NOWAIT); 382 for (i = 0; i < res.vr_len; i++) 383 sc->sk_vpd_prodname[i] = sk_vpd_readbyte(sc, i + pos); 384 sc->sk_vpd_prodname[i] = '\0'; 385 pos += i; 386 387 sk_vpd_read_res(sc, &res, pos); 388 389 if (res.vr_id != VPD_RES_READ) { 390 printf("skc%d: bad VPD resource id: expected %x got %x\n", 391 sc->sk_unit, VPD_RES_READ, res.vr_id); 392 return; 393 } 394 395 pos += sizeof(res); 396 sc->sk_vpd_readonly = malloc(res.vr_len, M_DEVBUF, M_NOWAIT); 397 for (i = 0; i < res.vr_len + 1; i++) 398 sc->sk_vpd_readonly[i] = sk_vpd_readbyte(sc, i + pos); 399 400 return; 401 } 402 403 static int sk_miibus_readreg(dev, phy, reg) 404 device_t dev; 405 int phy, reg; 406 { 407 struct sk_if_softc *sc_if; 408 int i; 409 410 sc_if = device_get_softc(dev); 411 412 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0) 413 return(0); 414 415 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); 416 SK_XM_READ_2(sc_if, XM_PHY_DATA); 417 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) { 418 for (i = 0; i < SK_TIMEOUT; i++) { 419 DELAY(1); 420 if (SK_XM_READ_2(sc_if, XM_MMUCMD) & 421 XM_MMUCMD_PHYDATARDY) 422 break; 423 } 424 425 if (i == SK_TIMEOUT) { 426 printf("sk%d: phy failed to come ready\n", 427 sc_if->sk_unit); 428 return(0); 429 } 430 } 431 DELAY(1); 432 return(SK_XM_READ_2(sc_if, XM_PHY_DATA)); 433 } 434 435 static int sk_miibus_writereg(dev, phy, reg, val) 436 device_t dev; 437 int phy, reg, val; 438 { 439 struct sk_if_softc *sc_if; 440 int i; 441 442 sc_if = device_get_softc(dev); 443 444 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); 445 for (i = 0; i < SK_TIMEOUT; i++) { 446 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY)) 447 break; 448 } 449 450 if (i == SK_TIMEOUT) { 451 printf("sk%d: phy failed to come ready\n", sc_if->sk_unit); 452 return(ETIMEDOUT); 453 } 454 455 SK_XM_WRITE_2(sc_if, XM_PHY_DATA, val); 456 for (i = 0; i < SK_TIMEOUT; i++) { 457 DELAY(1); 458 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY)) 459 break; 460 } 461 462 if (i == SK_TIMEOUT) 463 printf("sk%d: phy write timed out\n", sc_if->sk_unit); 464 465 return(0); 466 } 467 468 static void sk_miibus_statchg(dev) 469 device_t dev; 470 { 471 struct sk_if_softc *sc_if; 472 struct mii_data *mii; 473 474 sc_if = device_get_softc(dev); 475 mii = device_get_softc(sc_if->sk_miibus); 476 477 /* 478 * If this is a GMII PHY, manually set the XMAC's 479 * duplex mode accordingly. 480 */ 481 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) { 482 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { 483 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX); 484 } else { 485 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX); 486 } 487 } 488 489 return; 490 } 491 492 #define SK_POLY 0xEDB88320 493 #define SK_BITS 6 494 495 static u_int32_t sk_calchash(addr) 496 caddr_t addr; 497 { 498 u_int32_t idx, bit, data, crc; 499 500 /* Compute CRC for the address value. */ 501 crc = 0xFFFFFFFF; /* initial value */ 502 503 for (idx = 0; idx < 6; idx++) { 504 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1) 505 crc = (crc >> 1) ^ (((crc ^ data) & 1) ? SK_POLY : 0); 506 } 507 508 return (~crc & ((1 << SK_BITS) - 1)); 509 } 510 511 static void sk_setfilt(sc_if, addr, slot) 512 struct sk_if_softc *sc_if; 513 caddr_t addr; 514 int slot; 515 { 516 int base; 517 518 base = XM_RXFILT_ENTRY(slot); 519 520 SK_XM_WRITE_2(sc_if, base, *(u_int16_t *)(&addr[0])); 521 SK_XM_WRITE_2(sc_if, base + 2, *(u_int16_t *)(&addr[2])); 522 SK_XM_WRITE_2(sc_if, base + 4, *(u_int16_t *)(&addr[4])); 523 524 return; 525 } 526 527 static void sk_setmulti(sc_if) 528 struct sk_if_softc *sc_if; 529 { 530 struct ifnet *ifp; 531 u_int32_t hashes[2] = { 0, 0 }; 532 int h, i; 533 struct ifmultiaddr *ifma; 534 u_int8_t dummy[] = { 0, 0, 0, 0, 0 ,0 }; 535 536 ifp = &sc_if->arpcom.ac_if; 537 538 /* First, zot all the existing filters. */ 539 for (i = 1; i < XM_RXFILT_MAX; i++) 540 sk_setfilt(sc_if, (caddr_t)&dummy, i); 541 SK_XM_WRITE_4(sc_if, XM_MAR0, 0); 542 SK_XM_WRITE_4(sc_if, XM_MAR2, 0); 543 544 /* Now program new ones. */ 545 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 546 hashes[0] = 0xFFFFFFFF; 547 hashes[1] = 0xFFFFFFFF; 548 } else { 549 i = 1; 550 /* First find the tail of the list. */ 551 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; 552 ifma = ifma->ifma_link.le_next) { 553 if (ifma->ifma_link.le_next == NULL) 554 break; 555 } 556 /* Now traverse the list backwards. */ 557 for (; ifma != NULL && ifma != (void *)&ifp->if_multiaddrs; 558 ifma = (struct ifmultiaddr *)ifma->ifma_link.le_prev) { 559 if (ifma->ifma_addr->sa_family != AF_LINK) 560 continue; 561 /* 562 * Program the first XM_RXFILT_MAX multicast groups 563 * into the perfect filter. For all others, 564 * use the hash table. 565 */ 566 if (i < XM_RXFILT_MAX) { 567 sk_setfilt(sc_if, 568 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i); 569 i++; 570 continue; 571 } 572 573 h = sk_calchash( 574 LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); 575 if (h < 32) 576 hashes[0] |= (1 << h); 577 else 578 hashes[1] |= (1 << (h - 32)); 579 } 580 } 581 582 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH| 583 XM_MODE_RX_USE_PERFECT); 584 SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]); 585 SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]); 586 587 return; 588 } 589 590 static int sk_init_rx_ring(sc_if) 591 struct sk_if_softc *sc_if; 592 { 593 struct sk_chain_data *cd; 594 struct sk_ring_data *rd; 595 int i; 596 597 cd = &sc_if->sk_cdata; 598 rd = sc_if->sk_rdata; 599 600 bzero((char *)rd->sk_rx_ring, 601 sizeof(struct sk_rx_desc) * SK_RX_RING_CNT); 602 603 for (i = 0; i < SK_RX_RING_CNT; i++) { 604 cd->sk_rx_chain[i].sk_desc = &rd->sk_rx_ring[i]; 605 if (sk_newbuf(sc_if, &cd->sk_rx_chain[i], NULL) == ENOBUFS) 606 return(ENOBUFS); 607 if (i == (SK_RX_RING_CNT - 1)) { 608 cd->sk_rx_chain[i].sk_next = 609 &cd->sk_rx_chain[0]; 610 rd->sk_rx_ring[i].sk_next = 611 vtophys(&rd->sk_rx_ring[0]); 612 } else { 613 cd->sk_rx_chain[i].sk_next = 614 &cd->sk_rx_chain[i + 1]; 615 rd->sk_rx_ring[i].sk_next = 616 vtophys(&rd->sk_rx_ring[i + 1]); 617 } 618 } 619 620 sc_if->sk_cdata.sk_rx_prod = 0; 621 sc_if->sk_cdata.sk_rx_cons = 0; 622 623 return(0); 624 } 625 626 static void sk_init_tx_ring(sc_if) 627 struct sk_if_softc *sc_if; 628 { 629 struct sk_chain_data *cd; 630 struct sk_ring_data *rd; 631 int i; 632 633 cd = &sc_if->sk_cdata; 634 rd = sc_if->sk_rdata; 635 636 bzero((char *)sc_if->sk_rdata->sk_tx_ring, 637 sizeof(struct sk_tx_desc) * SK_TX_RING_CNT); 638 639 for (i = 0; i < SK_TX_RING_CNT; i++) { 640 cd->sk_tx_chain[i].sk_desc = &rd->sk_tx_ring[i]; 641 if (i == (SK_TX_RING_CNT - 1)) { 642 cd->sk_tx_chain[i].sk_next = 643 &cd->sk_tx_chain[0]; 644 rd->sk_tx_ring[i].sk_next = 645 vtophys(&rd->sk_tx_ring[0]); 646 } else { 647 cd->sk_tx_chain[i].sk_next = 648 &cd->sk_tx_chain[i + 1]; 649 rd->sk_tx_ring[i].sk_next = 650 vtophys(&rd->sk_tx_ring[i + 1]); 651 } 652 } 653 654 sc_if->sk_cdata.sk_tx_prod = 0; 655 sc_if->sk_cdata.sk_tx_cons = 0; 656 sc_if->sk_cdata.sk_tx_cnt = 0; 657 658 return; 659 } 660 661 static int sk_newbuf(sc_if, c, m) 662 struct sk_if_softc *sc_if; 663 struct sk_chain *c; 664 struct mbuf *m; 665 { 666 struct mbuf *m_new = NULL; 667 struct sk_rx_desc *r; 668 669 if (m == NULL) { 670 caddr_t *buf = NULL; 671 672 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 673 if (m_new == NULL) 674 return(ENOBUFS); 675 676 /* Allocate the jumbo buffer */ 677 buf = sk_jalloc(sc_if); 678 if (buf == NULL) { 679 m_freem(m_new); 680 #ifdef SK_VERBOSE 681 printf("sk%d: jumbo allocation failed " 682 "-- packet dropped!\n", sc_if->sk_unit); 683 #endif 684 return(ENOBUFS); 685 } 686 687 /* Attach the buffer to the mbuf */ 688 m_new->m_data = m_new->m_ext.ext_buf = (void *)buf; 689 m_new->m_flags |= M_EXT; 690 m_new->m_ext.ext_size = m_new->m_pkthdr.len = 691 m_new->m_len = SK_MCLBYTES; 692 m_new->m_ext.ext_free = sk_jfree; 693 m_new->m_ext.ext_ref = sk_jref; 694 } else { 695 /* 696 * We're re-using a previously allocated mbuf; 697 * be sure to re-init pointers and lengths to 698 * default values. 699 */ 700 m_new = m; 701 m_new->m_len = m_new->m_pkthdr.len = SK_MCLBYTES; 702 m_new->m_data = m_new->m_ext.ext_buf; 703 } 704 705 /* 706 * Adjust alignment so packet payload begins on a 707 * longword boundary. Mandatory for Alpha, useful on 708 * x86 too. 709 */ 710 m_adj(m_new, ETHER_ALIGN); 711 712 r = c->sk_desc; 713 c->sk_mbuf = m_new; 714 r->sk_data_lo = vtophys(mtod(m_new, caddr_t)); 715 r->sk_ctl = m_new->m_len | SK_RXSTAT; 716 717 return(0); 718 } 719 720 /* 721 * Allocate jumbo buffer storage. The SysKonnect adapters support 722 * "jumbograms" (9K frames), although SysKonnect doesn't currently 723 * use them in their drivers. In order for us to use them, we need 724 * large 9K receive buffers, however standard mbuf clusters are only 725 * 2048 bytes in size. Consequently, we need to allocate and manage 726 * our own jumbo buffer pool. Fortunately, this does not require an 727 * excessive amount of additional code. 728 */ 729 static int sk_alloc_jumbo_mem(sc_if) 730 struct sk_if_softc *sc_if; 731 { 732 caddr_t ptr; 733 int i; 734 struct sk_jpool_entry *entry; 735 736 /* Grab a big chunk o' storage. */ 737 sc_if->sk_cdata.sk_jumbo_buf = contigmalloc(SK_JMEM, M_DEVBUF, 738 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); 739 740 if (sc_if->sk_cdata.sk_jumbo_buf == NULL) { 741 printf("sk%d: no memory for jumbo buffers!\n", sc_if->sk_unit); 742 return(ENOBUFS); 743 } 744 745 SLIST_INIT(&sc_if->sk_jfree_listhead); 746 SLIST_INIT(&sc_if->sk_jinuse_listhead); 747 748 /* 749 * Now divide it up into 9K pieces and save the addresses 750 * in an array. Note that we play an evil trick here by using 751 * the first few bytes in the buffer to hold the the address 752 * of the softc structure for this interface. This is because 753 * sk_jfree() needs it, but it is called by the mbuf management 754 * code which will not pass it to us explicitly. 755 */ 756 ptr = sc_if->sk_cdata.sk_jumbo_buf; 757 for (i = 0; i < SK_JSLOTS; i++) { 758 u_int64_t **aptr; 759 aptr = (u_int64_t **)ptr; 760 aptr[0] = (u_int64_t *)sc_if; 761 ptr += sizeof(u_int64_t); 762 sc_if->sk_cdata.sk_jslots[i].sk_buf = ptr; 763 sc_if->sk_cdata.sk_jslots[i].sk_inuse = 0; 764 ptr += SK_MCLBYTES; 765 entry = malloc(sizeof(struct sk_jpool_entry), 766 M_DEVBUF, M_NOWAIT); 767 if (entry == NULL) { 768 free(sc_if->sk_cdata.sk_jumbo_buf, M_DEVBUF); 769 sc_if->sk_cdata.sk_jumbo_buf = NULL; 770 printf("sk%d: no memory for jumbo " 771 "buffer queue!\n", sc_if->sk_unit); 772 return(ENOBUFS); 773 } 774 entry->slot = i; 775 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead, 776 entry, jpool_entries); 777 } 778 779 return(0); 780 } 781 782 /* 783 * Allocate a jumbo buffer. 784 */ 785 static void *sk_jalloc(sc_if) 786 struct sk_if_softc *sc_if; 787 { 788 struct sk_jpool_entry *entry; 789 790 entry = SLIST_FIRST(&sc_if->sk_jfree_listhead); 791 792 if (entry == NULL) { 793 #ifdef SK_VERBOSE 794 printf("sk%d: no free jumbo buffers\n", sc_if->sk_unit); 795 #endif 796 return(NULL); 797 } 798 799 SLIST_REMOVE_HEAD(&sc_if->sk_jfree_listhead, jpool_entries); 800 SLIST_INSERT_HEAD(&sc_if->sk_jinuse_listhead, entry, jpool_entries); 801 sc_if->sk_cdata.sk_jslots[entry->slot].sk_inuse = 1; 802 return(sc_if->sk_cdata.sk_jslots[entry->slot].sk_buf); 803 } 804 805 /* 806 * Adjust usage count on a jumbo buffer. In general this doesn't 807 * get used much because our jumbo buffers don't get passed around 808 * a lot, but it's implemented for correctness. 809 */ 810 static void sk_jref(buf, size) 811 caddr_t buf; 812 u_int size; 813 { 814 struct sk_if_softc *sc_if; 815 u_int64_t **aptr; 816 int i; 817 818 /* Extract the softc struct pointer. */ 819 aptr = (u_int64_t **)(buf - sizeof(u_int64_t)); 820 sc_if = (struct sk_if_softc *)(aptr[0]); 821 822 if (sc_if == NULL) 823 panic("sk_jref: can't find softc pointer!"); 824 825 if (size != SK_MCLBYTES) 826 panic("sk_jref: adjusting refcount of buf of wrong size!"); 827 828 /* calculate the slot this buffer belongs to */ 829 830 i = ((vm_offset_t)aptr 831 - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN; 832 833 if ((i < 0) || (i >= SK_JSLOTS)) 834 panic("sk_jref: asked to reference buffer " 835 "that we don't manage!"); 836 else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0) 837 panic("sk_jref: buffer already free!"); 838 else 839 sc_if->sk_cdata.sk_jslots[i].sk_inuse++; 840 841 return; 842 } 843 844 /* 845 * Release a jumbo buffer. 846 */ 847 static void sk_jfree(buf, size) 848 caddr_t buf; 849 u_int size; 850 { 851 struct sk_if_softc *sc_if; 852 u_int64_t **aptr; 853 int i; 854 struct sk_jpool_entry *entry; 855 856 /* Extract the softc struct pointer. */ 857 aptr = (u_int64_t **)(buf - sizeof(u_int64_t)); 858 sc_if = (struct sk_if_softc *)(aptr[0]); 859 860 if (sc_if == NULL) 861 panic("sk_jfree: can't find softc pointer!"); 862 863 if (size != SK_MCLBYTES) 864 panic("sk_jfree: freeing buffer of wrong size!"); 865 866 /* calculate the slot this buffer belongs to */ 867 868 i = ((vm_offset_t)aptr 869 - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN; 870 871 if ((i < 0) || (i >= SK_JSLOTS)) 872 panic("sk_jfree: asked to free buffer that we don't manage!"); 873 else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0) 874 panic("sk_jfree: buffer already free!"); 875 else { 876 sc_if->sk_cdata.sk_jslots[i].sk_inuse--; 877 if(sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0) { 878 entry = SLIST_FIRST(&sc_if->sk_jinuse_listhead); 879 if (entry == NULL) 880 panic("sk_jfree: buffer not in use!"); 881 entry->slot = i; 882 SLIST_REMOVE_HEAD(&sc_if->sk_jinuse_listhead, 883 jpool_entries); 884 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead, 885 entry, jpool_entries); 886 } 887 } 888 889 return; 890 } 891 892 /* 893 * Set media options. 894 */ 895 static int sk_ifmedia_upd(ifp) 896 struct ifnet *ifp; 897 { 898 struct sk_if_softc *sc_if; 899 struct mii_data *mii; 900 901 sc_if = ifp->if_softc; 902 mii = device_get_softc(sc_if->sk_miibus); 903 sk_init(sc_if); 904 mii_mediachg(mii); 905 906 return(0); 907 } 908 909 /* 910 * Report current media status. 911 */ 912 static void sk_ifmedia_sts(ifp, ifmr) 913 struct ifnet *ifp; 914 struct ifmediareq *ifmr; 915 { 916 struct sk_if_softc *sc_if; 917 struct mii_data *mii; 918 919 sc_if = ifp->if_softc; 920 mii = device_get_softc(sc_if->sk_miibus); 921 922 mii_pollstat(mii); 923 ifmr->ifm_active = mii->mii_media_active; 924 ifmr->ifm_status = mii->mii_media_status; 925 926 return; 927 } 928 929 static int sk_ioctl(ifp, command, data) 930 struct ifnet *ifp; 931 u_long command; 932 caddr_t data; 933 { 934 struct sk_if_softc *sc_if = ifp->if_softc; 935 struct ifreq *ifr = (struct ifreq *) data; 936 int s, error = 0; 937 struct mii_data *mii; 938 939 s = splimp(); 940 941 switch(command) { 942 case SIOCSIFADDR: 943 case SIOCGIFADDR: 944 error = ether_ioctl(ifp, command, data); 945 break; 946 case SIOCSIFMTU: 947 if (ifr->ifr_mtu > SK_JUMBO_MTU) 948 error = EINVAL; 949 else { 950 ifp->if_mtu = ifr->ifr_mtu; 951 sk_init(sc_if); 952 } 953 break; 954 case SIOCSIFFLAGS: 955 if (ifp->if_flags & IFF_UP) { 956 if (ifp->if_flags & IFF_RUNNING && 957 ifp->if_flags & IFF_PROMISC && 958 !(sc_if->sk_if_flags & IFF_PROMISC)) { 959 SK_XM_SETBIT_4(sc_if, XM_MODE, 960 XM_MODE_RX_PROMISC); 961 sk_setmulti(sc_if); 962 } else if (ifp->if_flags & IFF_RUNNING && 963 !(ifp->if_flags & IFF_PROMISC) && 964 sc_if->sk_if_flags & IFF_PROMISC) { 965 SK_XM_CLRBIT_4(sc_if, XM_MODE, 966 XM_MODE_RX_PROMISC); 967 sk_setmulti(sc_if); 968 } else 969 sk_init(sc_if); 970 } else { 971 if (ifp->if_flags & IFF_RUNNING) 972 sk_stop(sc_if); 973 } 974 sc_if->sk_if_flags = ifp->if_flags; 975 error = 0; 976 break; 977 case SIOCADDMULTI: 978 case SIOCDELMULTI: 979 sk_setmulti(sc_if); 980 error = 0; 981 break; 982 case SIOCGIFMEDIA: 983 case SIOCSIFMEDIA: 984 mii = device_get_softc(sc_if->sk_miibus); 985 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 986 break; 987 default: 988 error = EINVAL; 989 break; 990 } 991 992 (void)splx(s); 993 994 return(error); 995 } 996 997 /* 998 * Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device 999 * IDs against our list and return a device name if we find a match. 1000 */ 1001 static int sk_probe(dev) 1002 device_t dev; 1003 { 1004 struct sk_type *t; 1005 1006 t = sk_devs; 1007 1008 while(t->sk_name != NULL) { 1009 if ((pci_get_vendor(dev) == t->sk_vid) && 1010 (pci_get_device(dev) == t->sk_did)) { 1011 device_set_desc(dev, t->sk_name); 1012 return(0); 1013 } 1014 t++; 1015 } 1016 1017 return(ENXIO); 1018 } 1019 1020 /* 1021 * Force the GEnesis into reset, then bring it out of reset. 1022 */ 1023 static void sk_reset(sc) 1024 struct sk_softc *sc; 1025 { 1026 CSR_WRITE_4(sc, SK_CSR, SK_CSR_SW_RESET); 1027 CSR_WRITE_4(sc, SK_CSR, SK_CSR_MASTER_RESET); 1028 DELAY(1000); 1029 CSR_WRITE_4(sc, SK_CSR, SK_CSR_SW_UNRESET); 1030 CSR_WRITE_4(sc, SK_CSR, SK_CSR_MASTER_UNRESET); 1031 1032 /* Configure packet arbiter */ 1033 sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET); 1034 sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT); 1035 sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT); 1036 sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT); 1037 sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT); 1038 1039 /* Enable RAM interface */ 1040 sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET); 1041 1042 /* 1043 * Configure interrupt moderation. The moderation timer 1044 * defers interrupts specified in the interrupt moderation 1045 * timer mask based on the timeout specified in the interrupt 1046 * moderation timer init register. Each bit in the timer 1047 * register represents 18.825ns, so to specify a timeout in 1048 * microseconds, we have to multiply by 54. 1049 */ 1050 sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(200)); 1051 sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF| 1052 SK_ISR_RX1_EOF|SK_ISR_RX2_EOF); 1053 sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START); 1054 1055 return; 1056 } 1057 1058 static int sk_probe_xmac(dev) 1059 device_t dev; 1060 { 1061 /* 1062 * Not much to do here. We always know there will be 1063 * at least one XMAC present, and if there are two, 1064 * sk_attach() will create a second device instance 1065 * for us. 1066 */ 1067 device_set_desc(dev, "XaQti Corp. XMAC II"); 1068 1069 return(0); 1070 } 1071 1072 /* 1073 * Each XMAC chip is attached as a separate logical IP interface. 1074 * Single port cards will have only one logical interface of course. 1075 */ 1076 static int sk_attach_xmac(dev) 1077 device_t dev; 1078 { 1079 struct sk_softc *sc; 1080 struct sk_if_softc *sc_if; 1081 struct ifnet *ifp; 1082 int i, port; 1083 1084 if (dev == NULL) 1085 return(EINVAL); 1086 1087 sc_if = device_get_softc(dev); 1088 sc = device_get_softc(device_get_parent(dev)); 1089 port = *(int *)device_get_ivars(dev); 1090 free(device_get_ivars(dev), M_DEVBUF); 1091 device_set_ivars(dev, NULL); 1092 sc_if->sk_dev = dev; 1093 1094 bzero((char *)sc_if, sizeof(struct sk_if_softc)); 1095 1096 sc_if->sk_dev = dev; 1097 sc_if->sk_unit = device_get_unit(dev); 1098 sc_if->sk_port = port; 1099 sc_if->sk_softc = sc; 1100 sc->sk_if[port] = sc_if; 1101 if (port == SK_PORT_A) 1102 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR0; 1103 if (port == SK_PORT_B) 1104 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR1; 1105 1106 /* 1107 * Get station address for this interface. Note that 1108 * dual port cards actually come with three station 1109 * addresses: one for each port, plus an extra. The 1110 * extra one is used by the SysKonnect driver software 1111 * as a 'virtual' station address for when both ports 1112 * are operating in failover mode. Currently we don't 1113 * use this extra address. 1114 */ 1115 for (i = 0; i < ETHER_ADDR_LEN; i++) 1116 sc_if->arpcom.ac_enaddr[i] = 1117 sk_win_read_1(sc, SK_MAC0_0 + (port * 8) + i); 1118 1119 printf("sk%d: Ethernet address: %6D\n", 1120 sc_if->sk_unit, sc_if->arpcom.ac_enaddr, ":"); 1121 1122 /* 1123 * Set up RAM buffer addresses. The NIC will have a certain 1124 * amount of SRAM on it, somewhere between 512K and 2MB. We 1125 * need to divide this up a) between the transmitter and 1126 * receiver and b) between the two XMACs, if this is a 1127 * dual port NIC. Our algotithm is to divide up the memory 1128 * evenly so that everyone gets a fair share. 1129 */ 1130 if (sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC) { 1131 u_int32_t chunk, val; 1132 1133 chunk = sc->sk_ramsize / 2; 1134 val = sc->sk_rboff / sizeof(u_int64_t); 1135 sc_if->sk_rx_ramstart = val; 1136 val += (chunk / sizeof(u_int64_t)); 1137 sc_if->sk_rx_ramend = val - 1; 1138 sc_if->sk_tx_ramstart = val; 1139 val += (chunk / sizeof(u_int64_t)); 1140 sc_if->sk_tx_ramend = val - 1; 1141 } else { 1142 u_int32_t chunk, val; 1143 1144 chunk = sc->sk_ramsize / 4; 1145 val = (sc->sk_rboff + (chunk * 2 * sc_if->sk_port)) / 1146 sizeof(u_int64_t); 1147 sc_if->sk_rx_ramstart = val; 1148 val += (chunk / sizeof(u_int64_t)); 1149 sc_if->sk_rx_ramend = val - 1; 1150 sc_if->sk_tx_ramstart = val; 1151 val += (chunk / sizeof(u_int64_t)); 1152 sc_if->sk_tx_ramend = val - 1; 1153 } 1154 1155 /* Read and save PHY type and set PHY address */ 1156 sc_if->sk_phytype = sk_win_read_1(sc, SK_EPROM1) & 0xF; 1157 switch(sc_if->sk_phytype) { 1158 case SK_PHYTYPE_XMAC: 1159 sc_if->sk_phyaddr = SK_PHYADDR_XMAC; 1160 break; 1161 case SK_PHYTYPE_BCOM: 1162 sc_if->sk_phyaddr = SK_PHYADDR_BCOM; 1163 break; 1164 default: 1165 printf("skc%d: unsupported PHY type: %d\n", 1166 sc->sk_unit, sc_if->sk_phytype); 1167 return(ENODEV); 1168 } 1169 1170 /* Allocate the descriptor queues. */ 1171 sc_if->sk_rdata = contigmalloc(sizeof(struct sk_ring_data), M_DEVBUF, 1172 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); 1173 1174 if (sc_if->sk_rdata == NULL) { 1175 printf("sk%d: no memory for list buffers!\n", sc_if->sk_unit); 1176 sc->sk_if[port] = NULL; 1177 return(ENOMEM); 1178 } 1179 1180 bzero(sc_if->sk_rdata, sizeof(struct sk_ring_data)); 1181 1182 /* Try to allocate memory for jumbo buffers. */ 1183 if (sk_alloc_jumbo_mem(sc_if)) { 1184 printf("sk%d: jumbo buffer allocation failed\n", 1185 sc_if->sk_unit); 1186 contigfree(sc_if->sk_rdata, 1187 sizeof(struct sk_ring_data), M_DEVBUF); 1188 sc->sk_if[port] = NULL; 1189 return(ENOMEM); 1190 } 1191 1192 ifp = &sc_if->arpcom.ac_if; 1193 ifp->if_softc = sc_if; 1194 ifp->if_unit = sc_if->sk_unit; 1195 ifp->if_name = "sk"; 1196 ifp->if_mtu = ETHERMTU; 1197 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1198 ifp->if_ioctl = sk_ioctl; 1199 ifp->if_output = ether_output; 1200 ifp->if_start = sk_start; 1201 ifp->if_watchdog = sk_watchdog; 1202 ifp->if_init = sk_init; 1203 ifp->if_baudrate = 1000000000; 1204 ifp->if_snd.ifq_maxlen = SK_TX_RING_CNT - 1; 1205 1206 /* 1207 * Do miibus setup. 1208 */ 1209 sk_init_xmac(sc_if); 1210 if (mii_phy_probe(dev, &sc_if->sk_miibus, 1211 sk_ifmedia_upd, sk_ifmedia_sts)) { 1212 printf("skc%d: no PHY found!\n", sc_if->sk_unit); 1213 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM, 1214 M_DEVBUF); 1215 contigfree(sc_if->sk_rdata, 1216 sizeof(struct sk_ring_data), M_DEVBUF); 1217 return(ENXIO); 1218 } 1219 1220 /* 1221 * Call MI attach routine. 1222 */ 1223 ether_ifattach(ifp, ETHER_BPF_SUPPORTED); 1224 callout_handle_init(&sc_if->sk_tick_ch); 1225 1226 return(0); 1227 } 1228 1229 /* 1230 * Attach the interface. Allocate softc structures, do ifmedia 1231 * setup and ethernet/BPF attach. 1232 */ 1233 static int sk_attach(dev) 1234 device_t dev; 1235 { 1236 int s; 1237 u_int32_t command; 1238 struct sk_softc *sc; 1239 int unit, error = 0, rid, *port; 1240 1241 s = splimp(); 1242 1243 sc = device_get_softc(dev); 1244 unit = device_get_unit(dev); 1245 bzero(sc, sizeof(struct sk_softc)); 1246 1247 /* 1248 * Handle power management nonsense. 1249 */ 1250 command = pci_read_config(dev, SK_PCI_CAPID, 4) & 0x000000FF; 1251 if (command == 0x01) { 1252 1253 command = pci_read_config(dev, SK_PCI_PWRMGMTCTRL, 4); 1254 if (command & SK_PSTATE_MASK) { 1255 u_int32_t iobase, membase, irq; 1256 1257 /* Save important PCI config data. */ 1258 iobase = pci_read_config(dev, SK_PCI_LOIO, 4); 1259 membase = pci_read_config(dev, SK_PCI_LOMEM, 4); 1260 irq = pci_read_config(dev, SK_PCI_INTLINE, 4); 1261 1262 /* Reset the power state. */ 1263 printf("skc%d: chip is in D%d power mode " 1264 "-- setting to D0\n", unit, command & SK_PSTATE_MASK); 1265 command &= 0xFFFFFFFC; 1266 pci_write_config(dev, SK_PCI_PWRMGMTCTRL, command, 4); 1267 1268 /* Restore PCI config data. */ 1269 pci_write_config(dev, SK_PCI_LOIO, iobase, 4); 1270 pci_write_config(dev, SK_PCI_LOMEM, membase, 4); 1271 pci_write_config(dev, SK_PCI_INTLINE, irq, 4); 1272 } 1273 } 1274 1275 /* 1276 * Map control/status registers. 1277 */ 1278 command = pci_read_config(dev, PCIR_COMMAND, 4); 1279 command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN); 1280 pci_write_config(dev, PCIR_COMMAND, command, 4); 1281 command = pci_read_config(dev, PCIR_COMMAND, 4); 1282 1283 #ifdef SK_USEIOSPACE 1284 if (!(command & PCIM_CMD_PORTEN)) { 1285 printf("skc%d: failed to enable I/O ports!\n", unit); 1286 error = ENXIO; 1287 goto fail; 1288 } 1289 #else 1290 if (!(command & PCIM_CMD_MEMEN)) { 1291 printf("skc%d: failed to enable memory mapping!\n", unit); 1292 error = ENXIO; 1293 goto fail; 1294 } 1295 #endif 1296 1297 rid = SK_RID; 1298 sc->sk_res = bus_alloc_resource(dev, SK_RES, &rid, 1299 0, ~0, 1, RF_ACTIVE); 1300 1301 if (sc->sk_res == NULL) { 1302 printf("sk%d: couldn't map ports/memory\n", unit); 1303 error = ENXIO; 1304 goto fail; 1305 } 1306 1307 sc->sk_btag = rman_get_bustag(sc->sk_res); 1308 sc->sk_bhandle = rman_get_bushandle(sc->sk_res); 1309 1310 /* Allocate interrupt */ 1311 rid = 0; 1312 sc->sk_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, 1313 RF_SHAREABLE | RF_ACTIVE); 1314 1315 if (sc->sk_irq == NULL) { 1316 printf("skc%d: couldn't map interrupt\n", unit); 1317 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1318 error = ENXIO; 1319 goto fail; 1320 } 1321 1322 error = bus_setup_intr(dev, sc->sk_irq, INTR_TYPE_NET, 1323 sk_intr, sc, &sc->sk_intrhand); 1324 1325 if (error) { 1326 printf("skc%d: couldn't set up irq\n", unit); 1327 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1328 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1329 goto fail; 1330 } 1331 1332 /* Reset the adapter. */ 1333 sk_reset(sc); 1334 1335 sc->sk_unit = unit; 1336 1337 /* Read and save vital product data from EEPROM. */ 1338 sk_vpd_read(sc); 1339 1340 /* Read and save RAM size and RAMbuffer offset */ 1341 switch(sk_win_read_1(sc, SK_EPROM0)) { 1342 case SK_RAMSIZE_512K_64: 1343 sc->sk_ramsize = 0x80000; 1344 sc->sk_rboff = SK_RBOFF_0; 1345 break; 1346 case SK_RAMSIZE_1024K_64: 1347 sc->sk_ramsize = 0x100000; 1348 sc->sk_rboff = SK_RBOFF_80000; 1349 break; 1350 case SK_RAMSIZE_1024K_128: 1351 sc->sk_ramsize = 0x100000; 1352 sc->sk_rboff = SK_RBOFF_0; 1353 break; 1354 case SK_RAMSIZE_2048K_128: 1355 sc->sk_ramsize = 0x200000; 1356 sc->sk_rboff = SK_RBOFF_0; 1357 break; 1358 default: 1359 printf("skc%d: unknown ram size: %d\n", 1360 sc->sk_unit, sk_win_read_1(sc, SK_EPROM0)); 1361 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand); 1362 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1363 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1364 error = ENXIO; 1365 goto fail; 1366 break; 1367 } 1368 1369 /* Read and save physical media type */ 1370 switch(sk_win_read_1(sc, SK_PMDTYPE)) { 1371 case SK_PMD_1000BASESX: 1372 sc->sk_pmd = IFM_1000_SX; 1373 break; 1374 case SK_PMD_1000BASELX: 1375 sc->sk_pmd = IFM_1000_LX; 1376 break; 1377 case SK_PMD_1000BASECX: 1378 sc->sk_pmd = IFM_1000_CX; 1379 break; 1380 case SK_PMD_1000BASETX: 1381 sc->sk_pmd = IFM_1000_TX; 1382 break; 1383 default: 1384 printf("skc%d: unknown media type: 0x%x\n", 1385 sc->sk_unit, sk_win_read_1(sc, SK_PMDTYPE)); 1386 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand); 1387 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1388 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1389 error = ENXIO; 1390 goto fail; 1391 } 1392 1393 /* Announce the product name. */ 1394 printf("skc%d: %s\n", sc->sk_unit, sc->sk_vpd_prodname); 1395 sc->sk_devs[SK_PORT_A] = device_add_child(dev, "sk", -1); 1396 port = malloc(sizeof(int), M_DEVBUF, M_NOWAIT); 1397 *port = SK_PORT_A; 1398 device_set_ivars(sc->sk_devs[SK_PORT_A], port); 1399 1400 if (!(sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC)) { 1401 sc->sk_devs[SK_PORT_B] = device_add_child(dev, "sk", -1); 1402 port = malloc(sizeof(int), M_DEVBUF, M_NOWAIT); 1403 *port = SK_PORT_B; 1404 device_set_ivars(sc->sk_devs[SK_PORT_B], port); 1405 } 1406 1407 /* Turn on the 'driver is loaded' LED. */ 1408 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON); 1409 1410 bus_generic_attach(dev); 1411 1412 fail: 1413 splx(s); 1414 return(error); 1415 } 1416 1417 static int sk_detach_xmac(dev) 1418 device_t dev; 1419 { 1420 struct sk_softc *sc; 1421 struct sk_if_softc *sc_if; 1422 struct ifnet *ifp; 1423 int s; 1424 1425 s = splimp(); 1426 1427 sc = device_get_softc(device_get_parent(dev)); 1428 sc_if = device_get_softc(dev); 1429 ifp = &sc_if->arpcom.ac_if; 1430 sk_stop(sc_if); 1431 ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); 1432 bus_generic_detach(dev); 1433 if (sc_if->sk_miibus != NULL) 1434 device_delete_child(dev, sc_if->sk_miibus); 1435 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM, M_DEVBUF); 1436 contigfree(sc_if->sk_rdata, sizeof(struct sk_ring_data), M_DEVBUF); 1437 1438 return(0); 1439 } 1440 1441 static int sk_detach(dev) 1442 device_t dev; 1443 { 1444 struct sk_softc *sc; 1445 int s; 1446 1447 s = splimp(); 1448 1449 sc = device_get_softc(dev); 1450 1451 bus_generic_detach(dev); 1452 if (sc->sk_devs[SK_PORT_A] != NULL) 1453 device_delete_child(dev, sc->sk_devs[SK_PORT_A]); 1454 if (sc->sk_devs[SK_PORT_B] != NULL) 1455 device_delete_child(dev, sc->sk_devs[SK_PORT_B]); 1456 1457 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand); 1458 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1459 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1460 1461 splx(s); 1462 1463 return(0); 1464 } 1465 1466 static int sk_encap(sc_if, m_head, txidx) 1467 struct sk_if_softc *sc_if; 1468 struct mbuf *m_head; 1469 u_int32_t *txidx; 1470 { 1471 struct sk_tx_desc *f = NULL; 1472 struct mbuf *m; 1473 u_int32_t frag, cur, cnt = 0; 1474 1475 m = m_head; 1476 cur = frag = *txidx; 1477 1478 /* 1479 * Start packing the mbufs in this chain into 1480 * the fragment pointers. Stop when we run out 1481 * of fragments or hit the end of the mbuf chain. 1482 */ 1483 for (m = m_head; m != NULL; m = m->m_next) { 1484 if (m->m_len != 0) { 1485 if ((SK_TX_RING_CNT - 1486 (sc_if->sk_cdata.sk_tx_cnt + cnt)) < 2) 1487 return(ENOBUFS); 1488 f = &sc_if->sk_rdata->sk_tx_ring[frag]; 1489 f->sk_data_lo = vtophys(mtod(m, vm_offset_t)); 1490 f->sk_ctl = m->m_len | SK_OPCODE_DEFAULT; 1491 if (cnt == 0) 1492 f->sk_ctl |= SK_TXCTL_FIRSTFRAG; 1493 else 1494 f->sk_ctl |= SK_TXCTL_OWN; 1495 cur = frag; 1496 SK_INC(frag, SK_TX_RING_CNT); 1497 cnt++; 1498 } 1499 } 1500 1501 if (m != NULL) 1502 return(ENOBUFS); 1503 1504 sc_if->sk_rdata->sk_tx_ring[cur].sk_ctl |= 1505 SK_TXCTL_LASTFRAG|SK_TXCTL_EOF_INTR; 1506 sc_if->sk_cdata.sk_tx_chain[cur].sk_mbuf = m_head; 1507 sc_if->sk_rdata->sk_tx_ring[*txidx].sk_ctl |= SK_TXCTL_OWN; 1508 sc_if->sk_cdata.sk_tx_cnt += cnt; 1509 1510 *txidx = frag; 1511 1512 return(0); 1513 } 1514 1515 static void sk_start(ifp) 1516 struct ifnet *ifp; 1517 { 1518 struct sk_softc *sc; 1519 struct sk_if_softc *sc_if; 1520 struct mbuf *m_head = NULL; 1521 u_int32_t idx; 1522 1523 sc_if = ifp->if_softc; 1524 sc = sc_if->sk_softc; 1525 1526 idx = sc_if->sk_cdata.sk_tx_prod; 1527 1528 while(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf == NULL) { 1529 IF_DEQUEUE(&ifp->if_snd, m_head); 1530 if (m_head == NULL) 1531 break; 1532 1533 /* 1534 * Pack the data into the transmit ring. If we 1535 * don't have room, set the OACTIVE flag and wait 1536 * for the NIC to drain the ring. 1537 */ 1538 if (sk_encap(sc_if, m_head, &idx)) { 1539 IF_PREPEND(&ifp->if_snd, m_head); 1540 ifp->if_flags |= IFF_OACTIVE; 1541 break; 1542 } 1543 1544 /* 1545 * If there's a BPF listener, bounce a copy of this frame 1546 * to him. 1547 */ 1548 if (ifp->if_bpf) 1549 bpf_mtap(ifp, m_head); 1550 } 1551 1552 /* Transmit */ 1553 sc_if->sk_cdata.sk_tx_prod = idx; 1554 CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START); 1555 1556 /* Set a timeout in case the chip goes out to lunch. */ 1557 ifp->if_timer = 5; 1558 1559 return; 1560 } 1561 1562 1563 static void sk_watchdog(ifp) 1564 struct ifnet *ifp; 1565 { 1566 struct sk_if_softc *sc_if; 1567 1568 sc_if = ifp->if_softc; 1569 1570 printf("sk%d: watchdog timeout\n", sc_if->sk_unit); 1571 sk_init(sc_if); 1572 1573 return; 1574 } 1575 1576 static void sk_shutdown(dev) 1577 device_t dev; 1578 { 1579 struct sk_softc *sc; 1580 1581 sc = device_get_softc(dev); 1582 1583 /* Turn off the 'driver is loaded' LED. */ 1584 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF); 1585 1586 /* 1587 * Reset the GEnesis controller. Doing this should also 1588 * assert the resets on the attached XMAC(s). 1589 */ 1590 sk_reset(sc); 1591 1592 return; 1593 } 1594 1595 static void sk_rxeof(sc_if) 1596 struct sk_if_softc *sc_if; 1597 { 1598 struct ether_header *eh; 1599 struct mbuf *m; 1600 struct ifnet *ifp; 1601 struct sk_chain *cur_rx; 1602 int total_len = 0; 1603 int i; 1604 u_int32_t rxstat; 1605 1606 ifp = &sc_if->arpcom.ac_if; 1607 i = sc_if->sk_cdata.sk_rx_prod; 1608 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i]; 1609 1610 while(!(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl & SK_RXCTL_OWN)) { 1611 1612 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i]; 1613 rxstat = sc_if->sk_rdata->sk_rx_ring[i].sk_xmac_rxstat; 1614 m = cur_rx->sk_mbuf; 1615 cur_rx->sk_mbuf = NULL; 1616 total_len = SK_RXBYTES(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl); 1617 SK_INC(i, SK_RX_RING_CNT); 1618 1619 if (rxstat & XM_RXSTAT_ERRFRAME) { 1620 ifp->if_ierrors++; 1621 sk_newbuf(sc_if, cur_rx, m); 1622 continue; 1623 } 1624 1625 /* 1626 * Try to allocate a new jumbo buffer. If that 1627 * fails, copy the packet to mbufs and put the 1628 * jumbo buffer back in the ring so it can be 1629 * re-used. If allocating mbufs fails, then we 1630 * have to drop the packet. 1631 */ 1632 if (sk_newbuf(sc_if, cur_rx, NULL) == ENOBUFS) { 1633 struct mbuf *m0; 1634 m0 = m_devget(mtod(m, char *) - ETHER_ALIGN, 1635 total_len + ETHER_ALIGN, 0, ifp, NULL); 1636 sk_newbuf(sc_if, cur_rx, m); 1637 if (m0 == NULL) { 1638 printf("sk%d: no receive buffers " 1639 "available -- packet dropped!\n", 1640 sc_if->sk_unit); 1641 ifp->if_ierrors++; 1642 continue; 1643 } 1644 m_adj(m0, ETHER_ALIGN); 1645 m = m0; 1646 } else { 1647 m->m_pkthdr.rcvif = ifp; 1648 m->m_pkthdr.len = m->m_len = total_len; 1649 } 1650 1651 ifp->if_ipackets++; 1652 eh = mtod(m, struct ether_header *); 1653 1654 /* Remove header from mbuf and pass it on. */ 1655 m_adj(m, sizeof(struct ether_header)); 1656 ether_input(ifp, eh, m); 1657 } 1658 1659 sc_if->sk_cdata.sk_rx_prod = i; 1660 1661 return; 1662 } 1663 1664 static void sk_txeof(sc_if) 1665 struct sk_if_softc *sc_if; 1666 { 1667 struct sk_tx_desc *cur_tx = NULL; 1668 struct ifnet *ifp; 1669 u_int32_t idx; 1670 1671 ifp = &sc_if->arpcom.ac_if; 1672 1673 /* 1674 * Go through our tx ring and free mbufs for those 1675 * frames that have been sent. 1676 */ 1677 idx = sc_if->sk_cdata.sk_tx_cons; 1678 while(idx != sc_if->sk_cdata.sk_tx_prod) { 1679 cur_tx = &sc_if->sk_rdata->sk_tx_ring[idx]; 1680 if (cur_tx->sk_ctl & SK_TXCTL_OWN) 1681 break; 1682 if (cur_tx->sk_ctl & SK_TXCTL_LASTFRAG) 1683 ifp->if_opackets++; 1684 if (sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf != NULL) { 1685 m_freem(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf); 1686 sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf = NULL; 1687 } 1688 sc_if->sk_cdata.sk_tx_cnt--; 1689 SK_INC(idx, SK_TX_RING_CNT); 1690 ifp->if_timer = 0; 1691 } 1692 1693 sc_if->sk_cdata.sk_tx_cons = idx; 1694 1695 if (cur_tx != NULL) 1696 ifp->if_flags &= ~IFF_OACTIVE; 1697 1698 return; 1699 } 1700 1701 static void sk_tick(xsc_if) 1702 void *xsc_if; 1703 { 1704 struct sk_if_softc *sc_if; 1705 struct mii_data *mii; 1706 struct ifnet *ifp; 1707 int i; 1708 1709 sc_if = xsc_if; 1710 ifp = &sc_if->arpcom.ac_if; 1711 mii = device_get_softc(sc_if->sk_miibus); 1712 1713 if (!(ifp->if_flags & IFF_UP)) 1714 return; 1715 1716 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 1717 sk_intr_bcom(sc_if); 1718 return; 1719 } 1720 1721 /* 1722 * According to SysKonnect, the correct way to verify that 1723 * the link has come back up is to poll bit 0 of the GPIO 1724 * register three times. This pin has the signal from the 1725 * link_sync pin connected to it; if we read the same link 1726 * state 3 times in a row, we know the link is up. 1727 */ 1728 for (i = 0; i < 3; i++) { 1729 if (SK_XM_READ_2(sc_if, XM_GPIO) & XM_GPIO_GP0_SET) 1730 break; 1731 } 1732 1733 if (i != 3) { 1734 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1735 return; 1736 } 1737 1738 /* Turn the GP0 interrupt back on. */ 1739 SK_XM_CLRBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET); 1740 SK_XM_READ_2(sc_if, XM_ISR); 1741 mii_tick(mii); 1742 mii_pollstat(mii); 1743 untimeout(sk_tick, sc_if, sc_if->sk_tick_ch); 1744 1745 return; 1746 } 1747 1748 static void sk_intr_bcom(sc_if) 1749 struct sk_if_softc *sc_if; 1750 { 1751 struct sk_softc *sc; 1752 struct mii_data *mii; 1753 struct ifnet *ifp; 1754 int status; 1755 1756 sc = sc_if->sk_softc; 1757 mii = device_get_softc(sc_if->sk_miibus); 1758 ifp = &sc_if->arpcom.ac_if; 1759 1760 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 1761 1762 /* 1763 * Read the PHY interrupt register to make sure 1764 * we clear any pending interrupts. 1765 */ 1766 status = sk_miibus_readreg(sc_if->sk_dev, 1767 SK_PHYADDR_BCOM, BRGPHY_MII_ISR); 1768 1769 if (!(ifp->if_flags & IFF_RUNNING)) { 1770 sk_init_xmac(sc_if); 1771 return; 1772 } 1773 1774 if (status & (BRGPHY_ISR_LNK_CHG|BRGPHY_ISR_AN_PR)) { 1775 int lstat; 1776 lstat = sk_miibus_readreg(sc_if->sk_dev, 1777 SK_PHYADDR_BCOM, BRGPHY_MII_AUXSTS); 1778 1779 if (!(lstat & BRGPHY_AUXSTS_LINK) && sc_if->sk_link) { 1780 mii_mediachg(mii); 1781 /* Turn off the link LED. */ 1782 SK_IF_WRITE_1(sc_if, 0, 1783 SK_LINKLED1_CTL, SK_LINKLED_OFF); 1784 sc_if->sk_link = 0; 1785 } else if (status & BRGPHY_ISR_LNK_CHG) { 1786 sk_miibus_writereg(sc_if->sk_dev, SK_PHYADDR_BCOM, 1787 BRGPHY_MII_IMR, 0xFF00); 1788 mii_tick(mii); 1789 sc_if->sk_link = 1; 1790 /* Turn on the link LED. */ 1791 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, 1792 SK_LINKLED_ON|SK_LINKLED_LINKSYNC_OFF| 1793 SK_LINKLED_BLINK_OFF); 1794 mii_pollstat(mii); 1795 } else { 1796 mii_tick(mii); 1797 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1798 } 1799 } 1800 1801 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 1802 1803 return; 1804 } 1805 1806 static void sk_intr_xmac(sc_if) 1807 struct sk_if_softc *sc_if; 1808 { 1809 struct sk_softc *sc; 1810 u_int16_t status; 1811 struct mii_data *mii; 1812 1813 sc = sc_if->sk_softc; 1814 mii = device_get_softc(sc_if->sk_miibus); 1815 status = SK_XM_READ_2(sc_if, XM_ISR); 1816 1817 /* 1818 * Link has gone down. Start MII tick timeout to 1819 * watch for link resync. 1820 */ 1821 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) { 1822 if (status & XM_ISR_GP0_SET) { 1823 SK_XM_SETBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET); 1824 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1825 } 1826 1827 if (status & XM_ISR_AUTONEG_DONE) { 1828 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1829 } 1830 } 1831 1832 if (status & XM_IMR_TX_UNDERRUN) 1833 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_TXFIFO); 1834 1835 if (status & XM_IMR_RX_OVERRUN) 1836 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_RXFIFO); 1837 1838 status = SK_XM_READ_2(sc_if, XM_ISR); 1839 1840 return; 1841 } 1842 1843 static void sk_intr(xsc) 1844 void *xsc; 1845 { 1846 struct sk_softc *sc = xsc; 1847 struct sk_if_softc *sc_if0 = NULL, *sc_if1 = NULL; 1848 struct ifnet *ifp0 = NULL, *ifp1 = NULL; 1849 u_int32_t status; 1850 1851 sc_if0 = sc->sk_if[SK_PORT_A]; 1852 sc_if1 = sc->sk_if[SK_PORT_B]; 1853 1854 if (sc_if0 != NULL) 1855 ifp0 = &sc_if0->arpcom.ac_if; 1856 if (sc_if1 != NULL) 1857 ifp1 = &sc_if1->arpcom.ac_if; 1858 1859 for (;;) { 1860 status = CSR_READ_4(sc, SK_ISSR); 1861 if (!(status & sc->sk_intrmask)) 1862 break; 1863 1864 /* Handle receive interrupts first. */ 1865 if (status & SK_ISR_RX1_EOF) { 1866 sk_rxeof(sc_if0); 1867 CSR_WRITE_4(sc, SK_BMU_RX_CSR0, 1868 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START); 1869 } 1870 if (status & SK_ISR_RX2_EOF) { 1871 sk_rxeof(sc_if1); 1872 CSR_WRITE_4(sc, SK_BMU_RX_CSR1, 1873 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START); 1874 } 1875 1876 /* Then transmit interrupts. */ 1877 if (status & SK_ISR_TX1_S_EOF) { 1878 sk_txeof(sc_if0); 1879 CSR_WRITE_4(sc, SK_BMU_TXS_CSR0, 1880 SK_TXBMU_CLR_IRQ_EOF); 1881 } 1882 if (status & SK_ISR_TX2_S_EOF) { 1883 sk_txeof(sc_if1); 1884 CSR_WRITE_4(sc, SK_BMU_TXS_CSR1, 1885 SK_TXBMU_CLR_IRQ_EOF); 1886 } 1887 1888 /* Then MAC interrupts. */ 1889 if (status & SK_ISR_MAC1 && 1890 ifp0->if_flags & IFF_RUNNING) 1891 sk_intr_xmac(sc_if0); 1892 1893 if (status & SK_ISR_MAC2 && 1894 ifp1->if_flags & IFF_RUNNING) 1895 sk_intr_xmac(sc_if1); 1896 1897 if (status & SK_ISR_EXTERNAL_REG) { 1898 if (ifp0 != NULL) 1899 sk_intr_bcom(sc_if0); 1900 if (ifp1 != NULL) 1901 sk_intr_bcom(sc_if1); 1902 } 1903 } 1904 1905 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 1906 1907 if (ifp0 != NULL && ifp0->if_snd.ifq_head != NULL) 1908 sk_start(ifp0); 1909 if (ifp1 != NULL && ifp1->if_snd.ifq_head != NULL) 1910 sk_start(ifp1); 1911 1912 return; 1913 } 1914 1915 static void sk_init_xmac(sc_if) 1916 struct sk_if_softc *sc_if; 1917 { 1918 struct sk_softc *sc; 1919 struct ifnet *ifp; 1920 struct sk_bcom_hack bhack[] = { 1921 { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 }, 1922 { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 }, 1923 { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, 1924 { 0, 0 } }; 1925 1926 sc = sc_if->sk_softc; 1927 ifp = &sc_if->arpcom.ac_if; 1928 1929 /* Unreset the XMAC. */ 1930 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_UNRESET); 1931 DELAY(1000); 1932 1933 /* Reset the XMAC's internal state. */ 1934 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); 1935 1936 /* Save the XMAC II revision */ 1937 sc_if->sk_xmac_rev = XM_XMAC_REV(SK_XM_READ_4(sc_if, XM_DEVID)); 1938 1939 /* 1940 * Perform additional initialization for external PHYs, 1941 * namely for the 1000baseTX cards that use the XMAC's 1942 * GMII mode. 1943 */ 1944 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 1945 int i = 0; 1946 u_int32_t val; 1947 1948 /* Take PHY out of reset. */ 1949 val = sk_win_read_4(sc, SK_GPIO); 1950 if (sc_if->sk_port == SK_PORT_A) 1951 val |= SK_GPIO_DIR0|SK_GPIO_DAT0; 1952 else 1953 val |= SK_GPIO_DIR2|SK_GPIO_DAT2; 1954 sk_win_write_4(sc, SK_GPIO, val); 1955 1956 /* Enable GMII mode on the XMAC. */ 1957 SK_XM_SETBIT_2(sc_if, XM_HWCFG, XM_HWCFG_GMIIMODE); 1958 1959 sk_miibus_writereg(sc_if->sk_dev, SK_PHYADDR_BCOM, 1960 BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET); 1961 DELAY(10000); 1962 sk_miibus_writereg(sc_if->sk_dev, SK_PHYADDR_BCOM, 1963 BRGPHY_MII_IMR, 0xFFF0); 1964 1965 /* 1966 * Early versions of the BCM5400 apparently have 1967 * a bug that requires them to have their reserved 1968 * registers initialized to some magic values. I don't 1969 * know what the numbers do, I'm just the messenger. 1970 */ 1971 if (sk_miibus_readreg(sc_if->sk_dev, 1972 SK_PHYADDR_BCOM, 0x03) == 0x6041) { 1973 while(bhack[i].reg) { 1974 sk_miibus_writereg(sc_if->sk_dev, 1975 SK_PHYADDR_BCOM, bhack[i].reg, 1976 bhack[i].val); 1977 i++; 1978 } 1979 } 1980 } 1981 1982 /* Set station address */ 1983 SK_XM_WRITE_2(sc_if, XM_PAR0, 1984 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[0])); 1985 SK_XM_WRITE_2(sc_if, XM_PAR1, 1986 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[2])); 1987 SK_XM_WRITE_2(sc_if, XM_PAR2, 1988 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[4])); 1989 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_STATION); 1990 1991 if (ifp->if_flags & IFF_PROMISC) { 1992 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); 1993 } else { 1994 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); 1995 } 1996 1997 if (ifp->if_flags & IFF_BROADCAST) { 1998 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD); 1999 } else { 2000 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD); 2001 } 2002 2003 /* We don't need the FCS appended to the packet. */ 2004 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_STRIPFCS); 2005 2006 /* We want short frames padded to 60 bytes. */ 2007 SK_XM_SETBIT_2(sc_if, XM_TXCMD, XM_TXCMD_AUTOPAD); 2008 2009 /* 2010 * Enable the reception of all error frames. This is is 2011 * a necessary evil due to the design of the XMAC. The 2012 * XMAC's receive FIFO is only 8K in size, however jumbo 2013 * frames can be up to 9000 bytes in length. When bad 2014 * frame filtering is enabled, the XMAC's RX FIFO operates 2015 * in 'store and forward' mode. For this to work, the 2016 * entire frame has to fit into the FIFO, but that means 2017 * that jumbo frames larger than 8192 bytes will be 2018 * truncated. Disabling all bad frame filtering causes 2019 * the RX FIFO to operate in streaming mode, in which 2020 * case the XMAC will start transfering frames out of the 2021 * RX FIFO as soon as the FIFO threshold is reached. 2022 */ 2023 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES| 2024 XM_MODE_RX_GIANTS|XM_MODE_RX_RUNTS|XM_MODE_RX_CRCERRS| 2025 XM_MODE_RX_INRANGELEN); 2026 2027 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN)) 2028 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK); 2029 else 2030 SK_XM_CLRBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK); 2031 2032 /* 2033 * Bump up the transmit threshold. This helps hold off transmit 2034 * underruns when we're blasting traffic from both ports at once. 2035 */ 2036 SK_XM_WRITE_2(sc_if, XM_TX_REQTHRESH, SK_XM_TX_FIFOTHRESH); 2037 2038 /* Set multicast filter */ 2039 sk_setmulti(sc_if); 2040 2041 /* Clear and enable interrupts */ 2042 SK_XM_READ_2(sc_if, XM_ISR); 2043 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) 2044 SK_XM_WRITE_2(sc_if, XM_IMR, XM_INTRS); 2045 else 2046 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF); 2047 2048 /* Configure MAC arbiter */ 2049 switch(sc_if->sk_xmac_rev) { 2050 case XM_XMAC_REV_B2: 2051 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_B2); 2052 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_B2); 2053 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_B2); 2054 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_B2); 2055 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_B2); 2056 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_B2); 2057 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_B2); 2058 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_B2); 2059 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2); 2060 break; 2061 case XM_XMAC_REV_C1: 2062 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_C1); 2063 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_C1); 2064 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_C1); 2065 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_C1); 2066 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_C1); 2067 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_C1); 2068 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_C1); 2069 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_C1); 2070 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2); 2071 break; 2072 default: 2073 break; 2074 } 2075 sk_win_write_2(sc, SK_MACARB_CTL, 2076 SK_MACARBCTL_UNRESET|SK_MACARBCTL_FASTOE_OFF); 2077 2078 sc_if->sk_link = 1; 2079 2080 return; 2081 } 2082 2083 /* 2084 * Note that to properly initialize any part of the GEnesis chip, 2085 * you first have to take it out of reset mode. 2086 */ 2087 static void sk_init(xsc) 2088 void *xsc; 2089 { 2090 struct sk_if_softc *sc_if = xsc; 2091 struct sk_softc *sc; 2092 struct ifnet *ifp; 2093 struct mii_data *mii; 2094 int s; 2095 2096 s = splimp(); 2097 2098 ifp = &sc_if->arpcom.ac_if; 2099 sc = sc_if->sk_softc; 2100 mii = device_get_softc(sc_if->sk_miibus); 2101 2102 /* Cancel pending I/O and free all RX/TX buffers. */ 2103 sk_stop(sc_if); 2104 2105 /* Configure LINK_SYNC LED */ 2106 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON); 2107 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_ON); 2108 2109 /* Configure RX LED */ 2110 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_START); 2111 2112 /* Configure TX LED */ 2113 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_TXLEDCTL_COUNTER_START); 2114 2115 /* Configure I2C registers */ 2116 2117 /* Configure XMAC(s) */ 2118 sk_init_xmac(sc_if); 2119 mii_mediachg(mii); 2120 2121 /* Configure MAC FIFOs */ 2122 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET); 2123 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END); 2124 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON); 2125 2126 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET); 2127 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END); 2128 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON); 2129 2130 /* Configure transmit arbiter(s) */ 2131 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, 2132 SK_TXARCTL_ON|SK_TXARCTL_FSYNC_ON); 2133 2134 /* Configure RAMbuffers */ 2135 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET); 2136 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart); 2137 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart); 2138 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart); 2139 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend); 2140 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON); 2141 2142 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_UNRESET); 2143 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_STORENFWD_ON); 2144 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_START, sc_if->sk_tx_ramstart); 2145 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_WR_PTR, sc_if->sk_tx_ramstart); 2146 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_RD_PTR, sc_if->sk_tx_ramstart); 2147 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_END, sc_if->sk_tx_ramend); 2148 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_ON); 2149 2150 /* Configure BMUs */ 2151 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_ONLINE); 2152 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_LO, 2153 vtophys(&sc_if->sk_rdata->sk_rx_ring[0])); 2154 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_HI, 0); 2155 2156 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_ONLINE); 2157 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_LO, 2158 vtophys(&sc_if->sk_rdata->sk_tx_ring[0])); 2159 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_HI, 0); 2160 2161 /* Init descriptors */ 2162 if (sk_init_rx_ring(sc_if) == ENOBUFS) { 2163 printf("sk%d: initialization failed: no " 2164 "memory for rx buffers\n", sc_if->sk_unit); 2165 sk_stop(sc_if); 2166 (void)splx(s); 2167 return; 2168 } 2169 sk_init_tx_ring(sc_if); 2170 2171 /* Configure interrupt handling */ 2172 CSR_READ_4(sc, SK_ISSR); 2173 if (sc_if->sk_port == SK_PORT_A) 2174 sc->sk_intrmask |= SK_INTRS1; 2175 else 2176 sc->sk_intrmask |= SK_INTRS2; 2177 2178 sc->sk_intrmask |= SK_ISR_EXTERNAL_REG; 2179 2180 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2181 2182 /* Start BMUs. */ 2183 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START); 2184 2185 /* Enable XMACs TX and RX state machines */ 2186 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE); 2187 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 2188 2189 ifp->if_flags |= IFF_RUNNING; 2190 ifp->if_flags &= ~IFF_OACTIVE; 2191 2192 splx(s); 2193 2194 return; 2195 } 2196 2197 static void sk_stop(sc_if) 2198 struct sk_if_softc *sc_if; 2199 { 2200 int i; 2201 struct sk_softc *sc; 2202 struct ifnet *ifp; 2203 2204 sc = sc_if->sk_softc; 2205 ifp = &sc_if->arpcom.ac_if; 2206 2207 untimeout(sk_tick, sc_if, sc_if->sk_tick_ch); 2208 2209 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 2210 u_int32_t val; 2211 2212 /* Put PHY back into reset. */ 2213 val = sk_win_read_4(sc, SK_GPIO); 2214 if (sc_if->sk_port == SK_PORT_A) { 2215 val |= SK_GPIO_DIR0; 2216 val &= ~SK_GPIO_DAT0; 2217 } else { 2218 val |= SK_GPIO_DIR2; 2219 val &= ~SK_GPIO_DAT2; 2220 } 2221 sk_win_write_4(sc, SK_GPIO, val); 2222 } 2223 2224 /* Turn off various components of this interface. */ 2225 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); 2226 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET); 2227 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET); 2228 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE); 2229 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF); 2230 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE); 2231 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF); 2232 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF); 2233 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP); 2234 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP); 2235 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF); 2236 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF); 2237 2238 /* Disable interrupts */ 2239 if (sc_if->sk_port == SK_PORT_A) 2240 sc->sk_intrmask &= ~SK_INTRS1; 2241 else 2242 sc->sk_intrmask &= ~SK_INTRS2; 2243 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2244 2245 SK_XM_READ_2(sc_if, XM_ISR); 2246 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF); 2247 2248 /* Free RX and TX mbufs still in the queues. */ 2249 for (i = 0; i < SK_RX_RING_CNT; i++) { 2250 if (sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf != NULL) { 2251 m_freem(sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf); 2252 sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf = NULL; 2253 } 2254 } 2255 2256 for (i = 0; i < SK_TX_RING_CNT; i++) { 2257 if (sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf != NULL) { 2258 m_freem(sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf); 2259 sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf = NULL; 2260 } 2261 } 2262 2263 ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE); 2264 2265 return; 2266 } 2267