1 /* 2 * Copyright (c) 1997, 1998, 1999, 2000 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $OpenBSD: if_sk.c,v 1.129 2006/10/16 12:30:08 tom Exp $ 33 * $FreeBSD: /c/ncvs/src/sys/pci/if_sk.c,v 1.20 2000/04/22 02:16:37 wpaul Exp $ 34 */ 35 36 /* 37 * Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu> 38 * 39 * Permission to use, copy, modify, and distribute this software for any 40 * purpose with or without fee is hereby granted, provided that the above 41 * copyright notice and this permission notice appear in all copies. 42 * 43 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 44 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 45 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 46 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 47 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 48 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 49 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 50 */ 51 52 /* 53 * SysKonnect SK-NET gigabit ethernet driver for FreeBSD. Supports 54 * the SK-984x series adapters, both single port and dual port. 55 * References: 56 * The XaQti XMAC II datasheet, 57 * http://www.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf 58 * The SysKonnect GEnesis manual, http://www.syskonnect.com 59 * 60 * Note: XaQti has been acquired by Vitesse, and Vitesse does not have the 61 * XMAC II datasheet online. I have put my copy at people.freebsd.org as a 62 * convenience to others until Vitesse corrects this problem: 63 * 64 * http://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf 65 * 66 * Written by Bill Paul <wpaul@ee.columbia.edu> 67 * Department of Electrical Engineering 68 * Columbia University, New York City 69 */ 70 71 /* 72 * The SysKonnect gigabit ethernet adapters consist of two main 73 * components: the SysKonnect GEnesis controller chip and the XaQti Corp. 74 * XMAC II gigabit ethernet MAC. The XMAC provides all of the MAC 75 * components and a PHY while the GEnesis controller provides a PCI 76 * interface with DMA support. Each card may have between 512K and 77 * 2MB of SRAM on board depending on the configuration. 78 * 79 * The SysKonnect GEnesis controller can have either one or two XMAC 80 * chips connected to it, allowing single or dual port NIC configurations. 81 * SysKonnect has the distinction of being the only vendor on the market 82 * with a dual port gigabit ethernet NIC. The GEnesis provides dual FIFOs, 83 * dual DMA queues, packet/MAC/transmit arbiters and direct access to the 84 * XMAC registers. This driver takes advantage of these features to allow 85 * both XMACs to operate as independent interfaces. 86 */ 87 88 #include <sys/param.h> 89 #include <sys/bus.h> 90 #include <sys/endian.h> 91 #include <sys/in_cksum.h> 92 #include <sys/kernel.h> 93 #include <sys/interrupt.h> 94 #include <sys/mbuf.h> 95 #include <sys/malloc.h> 96 #include <sys/queue.h> 97 #include <sys/rman.h> 98 #include <sys/serialize.h> 99 #include <sys/socket.h> 100 #include <sys/sockio.h> 101 #include <sys/sysctl.h> 102 103 #include <net/bpf.h> 104 #include <net/ethernet.h> 105 #include <net/if.h> 106 #include <net/if_arp.h> 107 #include <net/if_dl.h> 108 #include <net/if_media.h> 109 #include <net/ifq_var.h> 110 #include <net/vlan/if_vlan_var.h> 111 112 #include <netinet/ip.h> 113 #include <netinet/udp.h> 114 115 #include <dev/netif/mii_layer/mii.h> 116 #include <dev/netif/mii_layer/miivar.h> 117 #include <dev/netif/mii_layer/brgphyreg.h> 118 119 #include <bus/pci/pcireg.h> 120 #include <bus/pci/pcivar.h> 121 #include <bus/pci/pcidevs.h> 122 123 #include <dev/netif/sk/if_skreg.h> 124 #include <dev/netif/sk/yukonreg.h> 125 #include <dev/netif/sk/xmaciireg.h> 126 #include <dev/netif/sk/if_skvar.h> 127 128 #include "miibus_if.h" 129 130 #if 0 131 #define SK_DEBUG 132 #endif 133 134 #if 0 135 #define SK_RXCSUM 136 #endif 137 138 /* supported device vendors */ 139 static const struct skc_type { 140 uint16_t skc_vid; 141 uint16_t skc_did; 142 const char *skc_name; 143 } skc_devs[] = { 144 { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3C940, 145 "3Com 3C940" }, 146 { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3C940B, 147 "3Com 3C940B" }, 148 149 { PCI_VENDOR_CNET, PCI_PRODUCT_CNET_GIGACARD, 150 "CNet GigaCard" }, 151 152 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE530T_A1, 153 "D-Link DGE-530T A1" }, 154 { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE530T_B1, 155 "D-Link DGE-530T B1" }, 156 157 { PCI_VENDOR_LINKSYS, PCI_PRODUCT_LINKSYS_EG1032, 158 "Linksys EG1032 v2" }, 159 { PCI_VENDOR_LINKSYS, PCI_PRODUCT_LINKSYS_EG1064, 160 "Linksys EG1064" }, 161 162 { PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON, 163 "Marvell Yukon 88E8001/8003/8010" }, 164 { PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_BELKIN, 165 "Belkin F5D5005" }, 166 167 { PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SKNET_GE, 168 "SysKonnect SK-NET" }, 169 { PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SK9821v2, 170 "SysKonnect SK9821 v2" }, 171 172 { 0, 0, NULL } 173 }; 174 175 static int skc_probe(device_t); 176 static int skc_attach(device_t); 177 static int skc_detach(device_t); 178 static void skc_shutdown(device_t); 179 static int skc_sysctl_imtime(SYSCTL_HANDLER_ARGS); 180 181 static int sk_probe(device_t); 182 static int sk_attach(device_t); 183 static int sk_detach(device_t); 184 static void sk_tick(void *); 185 static void sk_yukon_tick(void *); 186 static void sk_intr(void *); 187 static void sk_intr_bcom(struct sk_if_softc *); 188 static void sk_intr_xmac(struct sk_if_softc *); 189 static void sk_intr_yukon(struct sk_if_softc *); 190 static void sk_rxeof(struct sk_if_softc *); 191 static void sk_txeof(struct sk_if_softc *); 192 static int sk_encap(struct sk_if_softc *, struct mbuf **, uint32_t *); 193 static void sk_start(struct ifnet *); 194 static int sk_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 195 static void sk_init(void *); 196 static void sk_init_xmac(struct sk_if_softc *); 197 static void sk_init_yukon(struct sk_if_softc *); 198 static void sk_stop(struct sk_if_softc *); 199 static void sk_watchdog(struct ifnet *); 200 static int sk_ifmedia_upd(struct ifnet *); 201 static void sk_ifmedia_sts(struct ifnet *, struct ifmediareq *); 202 static void sk_reset(struct sk_softc *); 203 static int sk_newbuf_jumbo(struct sk_if_softc *, int, int); 204 static int sk_newbuf_std(struct sk_if_softc *, int, int); 205 static int sk_jpool_alloc(device_t); 206 static void sk_jpool_free(struct sk_if_softc *); 207 static struct sk_jpool_entry 208 *sk_jalloc(struct sk_if_softc *); 209 static void sk_jfree(void *); 210 static void sk_jref(void *); 211 static int sk_init_rx_ring(struct sk_if_softc *); 212 static int sk_init_tx_ring(struct sk_if_softc *); 213 214 static int sk_miibus_readreg(device_t, int, int); 215 static int sk_miibus_writereg(device_t, int, int, int); 216 static void sk_miibus_statchg(device_t); 217 218 static int sk_xmac_miibus_readreg(struct sk_if_softc *, int, int); 219 static int sk_xmac_miibus_writereg(struct sk_if_softc *, int, int, int); 220 static void sk_xmac_miibus_statchg(struct sk_if_softc *); 221 222 static int sk_marv_miibus_readreg(struct sk_if_softc *, int, int); 223 static int sk_marv_miibus_writereg(struct sk_if_softc *, int, int, int); 224 static void sk_marv_miibus_statchg(struct sk_if_softc *); 225 226 static void sk_setfilt(struct sk_if_softc *, caddr_t, int); 227 static void sk_setmulti(struct sk_if_softc *); 228 static void sk_setpromisc(struct sk_if_softc *); 229 230 #ifdef SK_RXCSUM 231 static void sk_rxcsum(struct ifnet *, struct mbuf *, const uint16_t, 232 const uint16_t); 233 #endif 234 static int sk_dma_alloc(device_t); 235 static void sk_dma_free(device_t); 236 237 #ifdef SK_DEBUG 238 #define DPRINTF(x) if (skdebug) kprintf x 239 #define DPRINTFN(n,x) if (skdebug >= (n)) kprintf x 240 static int skdebug = 2; 241 242 static void sk_dump_txdesc(struct sk_tx_desc *, int); 243 static void sk_dump_mbuf(struct mbuf *); 244 static void sk_dump_bytes(const char *, int); 245 #else 246 #define DPRINTF(x) 247 #define DPRINTFN(n,x) 248 #endif 249 250 /* Interrupt moderation time. */ 251 static int skc_imtime = SK_IMTIME_DEFAULT; 252 TUNABLE_INT("hw.skc.imtime", &skc_imtime); 253 254 /* 255 * Note that we have newbus methods for both the GEnesis controller 256 * itself and the XMAC(s). The XMACs are children of the GEnesis, and 257 * the miibus code is a child of the XMACs. We need to do it this way 258 * so that the miibus drivers can access the PHY registers on the 259 * right PHY. It's not quite what I had in mind, but it's the only 260 * design that achieves the desired effect. 261 */ 262 static device_method_t skc_methods[] = { 263 /* Device interface */ 264 DEVMETHOD(device_probe, skc_probe), 265 DEVMETHOD(device_attach, skc_attach), 266 DEVMETHOD(device_detach, skc_detach), 267 DEVMETHOD(device_shutdown, skc_shutdown), 268 269 /* bus interface */ 270 DEVMETHOD(bus_print_child, bus_generic_print_child), 271 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 272 273 { 0, 0 } 274 }; 275 276 static DEFINE_CLASS_0(skc, skc_driver, skc_methods, sizeof(struct sk_softc)); 277 static devclass_t skc_devclass; 278 279 static device_method_t sk_methods[] = { 280 /* Device interface */ 281 DEVMETHOD(device_probe, sk_probe), 282 DEVMETHOD(device_attach, sk_attach), 283 DEVMETHOD(device_detach, sk_detach), 284 DEVMETHOD(device_shutdown, bus_generic_shutdown), 285 286 /* bus interface */ 287 DEVMETHOD(bus_print_child, bus_generic_print_child), 288 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 289 290 /* MII interface */ 291 DEVMETHOD(miibus_readreg, sk_miibus_readreg), 292 DEVMETHOD(miibus_writereg, sk_miibus_writereg), 293 DEVMETHOD(miibus_statchg, sk_miibus_statchg), 294 295 { 0, 0 } 296 }; 297 298 static DEFINE_CLASS_0(sk, sk_driver, sk_methods, sizeof(struct sk_if_softc)); 299 static devclass_t sk_devclass; 300 301 DECLARE_DUMMY_MODULE(if_sk); 302 DRIVER_MODULE(if_sk, pci, skc_driver, skc_devclass, NULL, NULL); 303 DRIVER_MODULE(if_sk, skc, sk_driver, sk_devclass, NULL, NULL); 304 DRIVER_MODULE(miibus, sk, miibus_driver, miibus_devclass, NULL, NULL); 305 306 static __inline uint32_t 307 sk_win_read_4(struct sk_softc *sc, uint32_t reg) 308 { 309 return CSR_READ_4(sc, reg); 310 } 311 312 static __inline uint16_t 313 sk_win_read_2(struct sk_softc *sc, uint32_t reg) 314 { 315 return CSR_READ_2(sc, reg); 316 } 317 318 static __inline uint8_t 319 sk_win_read_1(struct sk_softc *sc, uint32_t reg) 320 { 321 return CSR_READ_1(sc, reg); 322 } 323 324 static __inline void 325 sk_win_write_4(struct sk_softc *sc, uint32_t reg, uint32_t x) 326 { 327 CSR_WRITE_4(sc, reg, x); 328 } 329 330 static __inline void 331 sk_win_write_2(struct sk_softc *sc, uint32_t reg, uint16_t x) 332 { 333 CSR_WRITE_2(sc, reg, x); 334 } 335 336 static __inline void 337 sk_win_write_1(struct sk_softc *sc, uint32_t reg, uint8_t x) 338 { 339 CSR_WRITE_1(sc, reg, x); 340 } 341 342 static __inline int 343 sk_newbuf(struct sk_if_softc *sc_if, int idx, int wait) 344 { 345 int ret; 346 347 if (sc_if->sk_use_jumbo) 348 ret = sk_newbuf_jumbo(sc_if, idx, wait); 349 else 350 ret = sk_newbuf_std(sc_if, idx, wait); 351 return ret; 352 } 353 354 static int 355 sk_miibus_readreg(device_t dev, int phy, int reg) 356 { 357 struct sk_if_softc *sc_if = device_get_softc(dev); 358 359 if (SK_IS_GENESIS(sc_if->sk_softc)) 360 return sk_xmac_miibus_readreg(sc_if, phy, reg); 361 else 362 return sk_marv_miibus_readreg(sc_if, phy, reg); 363 } 364 365 static int 366 sk_miibus_writereg(device_t dev, int phy, int reg, int val) 367 { 368 struct sk_if_softc *sc_if = device_get_softc(dev); 369 370 if (SK_IS_GENESIS(sc_if->sk_softc)) 371 return sk_xmac_miibus_writereg(sc_if, phy, reg, val); 372 else 373 return sk_marv_miibus_writereg(sc_if, phy, reg, val); 374 } 375 376 static void 377 sk_miibus_statchg(device_t dev) 378 { 379 struct sk_if_softc *sc_if = device_get_softc(dev); 380 381 if (SK_IS_GENESIS(sc_if->sk_softc)) 382 sk_xmac_miibus_statchg(sc_if); 383 else 384 sk_marv_miibus_statchg(sc_if); 385 } 386 387 static int 388 sk_xmac_miibus_readreg(struct sk_if_softc *sc_if, int phy, int reg) 389 { 390 int i; 391 392 DPRINTFN(9, ("sk_xmac_miibus_readreg\n")); 393 394 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0) 395 return(0); 396 397 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); 398 SK_XM_READ_2(sc_if, XM_PHY_DATA); 399 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) { 400 for (i = 0; i < SK_TIMEOUT; i++) { 401 DELAY(1); 402 if (SK_XM_READ_2(sc_if, XM_MMUCMD) & 403 XM_MMUCMD_PHYDATARDY) 404 break; 405 } 406 407 if (i == SK_TIMEOUT) { 408 if_printf(&sc_if->arpcom.ac_if, 409 "phy failed to come ready\n"); 410 return(0); 411 } 412 } 413 DELAY(1); 414 return(SK_XM_READ_2(sc_if, XM_PHY_DATA)); 415 } 416 417 static int 418 sk_xmac_miibus_writereg(struct sk_if_softc *sc_if, int phy, int reg, int val) 419 { 420 int i; 421 422 DPRINTFN(9, ("sk_xmac_miibus_writereg\n")); 423 424 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); 425 for (i = 0; i < SK_TIMEOUT; i++) { 426 if ((SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY) == 0) 427 break; 428 } 429 430 if (i == SK_TIMEOUT) { 431 if_printf(&sc_if->arpcom.ac_if, "phy failed to come ready\n"); 432 return(ETIMEDOUT); 433 } 434 435 SK_XM_WRITE_2(sc_if, XM_PHY_DATA, val); 436 for (i = 0; i < SK_TIMEOUT; i++) { 437 DELAY(1); 438 if ((SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY) == 0) 439 break; 440 } 441 442 if (i == SK_TIMEOUT) 443 if_printf(&sc_if->arpcom.ac_if, "phy write timed out\n"); 444 return(0); 445 } 446 447 static void 448 sk_xmac_miibus_statchg(struct sk_if_softc *sc_if) 449 { 450 struct mii_data *mii; 451 452 mii = device_get_softc(sc_if->sk_miibus); 453 DPRINTFN(9, ("sk_xmac_miibus_statchg\n")); 454 455 /* 456 * If this is a GMII PHY, manually set the XMAC's 457 * duplex mode accordingly. 458 */ 459 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) { 460 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) 461 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX); 462 else 463 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX); 464 } 465 } 466 467 static int 468 sk_marv_miibus_readreg(struct sk_if_softc *sc_if, int phy, int reg) 469 { 470 uint16_t val; 471 int i; 472 473 if (phy != 0 || 474 (sc_if->sk_phytype != SK_PHYTYPE_MARV_COPPER && 475 sc_if->sk_phytype != SK_PHYTYPE_MARV_FIBER)) { 476 DPRINTFN(9, ("sk_marv_miibus_readreg (skip) phy=%d, reg=%#x\n", 477 phy, reg)); 478 return(0); 479 } 480 481 SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) | 482 YU_SMICR_REGAD(reg) | YU_SMICR_OP_READ); 483 484 for (i = 0; i < SK_TIMEOUT; i++) { 485 DELAY(1); 486 val = SK_YU_READ_2(sc_if, YUKON_SMICR); 487 if (val & YU_SMICR_READ_VALID) 488 break; 489 } 490 491 if (i == SK_TIMEOUT) { 492 if_printf(&sc_if->arpcom.ac_if, "phy failed to come ready\n"); 493 return(0); 494 } 495 496 DPRINTFN(9, ("sk_marv_miibus_readreg: i=%d, timeout=%d\n", i, 497 SK_TIMEOUT)); 498 499 val = SK_YU_READ_2(sc_if, YUKON_SMIDR); 500 501 DPRINTFN(9, ("sk_marv_miibus_readreg phy=%d, reg=%#x, val=%#x\n", 502 phy, reg, val)); 503 504 return(val); 505 } 506 507 static int 508 sk_marv_miibus_writereg(struct sk_if_softc *sc_if, int phy, int reg, int val) 509 { 510 int i; 511 512 DPRINTFN(9, ("sk_marv_miibus_writereg phy=%d reg=%#x val=%#x\n", 513 phy, reg, val)); 514 515 SK_YU_WRITE_2(sc_if, YUKON_SMIDR, val); 516 SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) | 517 YU_SMICR_REGAD(reg) | YU_SMICR_OP_WRITE); 518 519 for (i = 0; i < SK_TIMEOUT; i++) { 520 DELAY(1); 521 if (SK_YU_READ_2(sc_if, YUKON_SMICR) & YU_SMICR_BUSY) 522 break; 523 } 524 525 if (i == SK_TIMEOUT) 526 if_printf(&sc_if->arpcom.ac_if, "phy write timed out\n"); 527 528 return(0); 529 } 530 531 static void 532 sk_marv_miibus_statchg(struct sk_if_softc *sc_if) 533 { 534 DPRINTFN(9, ("sk_marv_miibus_statchg: gpcr=%x\n", 535 SK_YU_READ_2(sc_if, YUKON_GPCR))); 536 } 537 538 #define HASH_BITS 6 539 540 static uint32_t 541 sk_xmac_hash(caddr_t addr) 542 { 543 uint32_t crc; 544 545 crc = ether_crc32_le(addr, ETHER_ADDR_LEN); 546 return (~crc & ((1 << HASH_BITS) - 1)); 547 } 548 549 static uint32_t 550 sk_yukon_hash(caddr_t addr) 551 { 552 uint32_t crc; 553 554 crc = ether_crc32_be(addr, ETHER_ADDR_LEN); 555 return (crc & ((1 << HASH_BITS) - 1)); 556 } 557 558 static void 559 sk_setfilt(struct sk_if_softc *sc_if, caddr_t addr, int slot) 560 { 561 int base; 562 563 base = XM_RXFILT_ENTRY(slot); 564 565 SK_XM_WRITE_2(sc_if, base, *(uint16_t *)(&addr[0])); 566 SK_XM_WRITE_2(sc_if, base + 2, *(uint16_t *)(&addr[2])); 567 SK_XM_WRITE_2(sc_if, base + 4, *(uint16_t *)(&addr[4])); 568 } 569 570 static void 571 sk_setmulti(struct sk_if_softc *sc_if) 572 { 573 struct sk_softc *sc = sc_if->sk_softc; 574 struct ifnet *ifp = &sc_if->arpcom.ac_if; 575 uint32_t hashes[2] = { 0, 0 }; 576 int h = 0, i; 577 struct ifmultiaddr *ifma; 578 uint8_t dummy[] = { 0, 0, 0, 0, 0 ,0 }; 579 580 /* First, zot all the existing filters. */ 581 switch(sc->sk_type) { 582 case SK_GENESIS: 583 for (i = 1; i < XM_RXFILT_MAX; i++) 584 sk_setfilt(sc_if, (caddr_t)&dummy, i); 585 586 SK_XM_WRITE_4(sc_if, XM_MAR0, 0); 587 SK_XM_WRITE_4(sc_if, XM_MAR2, 0); 588 break; 589 case SK_YUKON: 590 case SK_YUKON_LITE: 591 case SK_YUKON_LP: 592 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0); 593 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0); 594 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0); 595 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0); 596 break; 597 } 598 599 /* Now program new ones. */ 600 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 601 hashes[0] = 0xFFFFFFFF; 602 hashes[1] = 0xFFFFFFFF; 603 } else { 604 i = 1; 605 /* First find the tail of the list. */ 606 TAILQ_FOREACH_REVERSE(ifma, &ifp->if_multiaddrs, ifmultihead, 607 ifma_link) { 608 caddr_t maddr; 609 610 if (ifma->ifma_addr->sa_family != AF_LINK) 611 continue; 612 613 maddr = LLADDR((struct sockaddr_dl *)ifma->ifma_addr); 614 615 /* 616 * Program the first XM_RXFILT_MAX multicast groups 617 * into the perfect filter. For all others, 618 * use the hash table. 619 */ 620 if (SK_IS_GENESIS(sc) && i < XM_RXFILT_MAX) { 621 sk_setfilt(sc_if, maddr, i); 622 i++; 623 continue; 624 } 625 626 switch(sc->sk_type) { 627 case SK_GENESIS: 628 h = sk_xmac_hash(maddr); 629 break; 630 631 case SK_YUKON: 632 case SK_YUKON_LITE: 633 case SK_YUKON_LP: 634 h = sk_yukon_hash(maddr); 635 break; 636 } 637 if (h < 32) 638 hashes[0] |= (1 << h); 639 else 640 hashes[1] |= (1 << (h - 32)); 641 } 642 } 643 644 switch(sc->sk_type) { 645 case SK_GENESIS: 646 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH| 647 XM_MODE_RX_USE_PERFECT); 648 SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]); 649 SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]); 650 break; 651 case SK_YUKON: 652 case SK_YUKON_LITE: 653 case SK_YUKON_LP: 654 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, hashes[0] & 0xffff); 655 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, (hashes[0] >> 16) & 0xffff); 656 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, hashes[1] & 0xffff); 657 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, (hashes[1] >> 16) & 0xffff); 658 break; 659 } 660 } 661 662 static void 663 sk_setpromisc(struct sk_if_softc *sc_if) 664 { 665 struct sk_softc *sc = sc_if->sk_softc; 666 struct ifnet *ifp = &sc_if->arpcom.ac_if; 667 668 switch(sc->sk_type) { 669 case SK_GENESIS: 670 if (ifp->if_flags & IFF_PROMISC) 671 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); 672 else 673 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); 674 break; 675 case SK_YUKON: 676 case SK_YUKON_LITE: 677 case SK_YUKON_LP: 678 if (ifp->if_flags & IFF_PROMISC) { 679 SK_YU_CLRBIT_2(sc_if, YUKON_RCR, 680 YU_RCR_UFLEN | YU_RCR_MUFLEN); 681 } else { 682 SK_YU_SETBIT_2(sc_if, YUKON_RCR, 683 YU_RCR_UFLEN | YU_RCR_MUFLEN); 684 } 685 break; 686 } 687 } 688 689 static int 690 sk_init_rx_ring(struct sk_if_softc *sc_if) 691 { 692 struct sk_chain_data *cd = &sc_if->sk_cdata; 693 struct sk_ring_data *rd = &sc_if->sk_rdata; 694 int i, nexti, error; 695 696 bzero(rd->sk_rx_ring, SK_RX_RING_SIZE); 697 698 for (i = 0; i < SK_RX_RING_CNT; i++) { 699 bus_addr_t paddr; 700 701 if (i == (SK_RX_RING_CNT - 1)) 702 nexti = 0; 703 else 704 nexti = i + 1; 705 paddr = rd->sk_rx_ring_paddr + 706 (nexti * sizeof(struct sk_rx_desc)); 707 708 rd->sk_rx_ring[i].sk_next = htole32(SK_ADDR_LO(paddr)); 709 rd->sk_rx_ring[i].sk_csum1_start = htole16(ETHER_HDR_LEN); 710 rd->sk_rx_ring[i].sk_csum2_start = 711 htole16(ETHER_HDR_LEN + sizeof(struct ip)); 712 713 error = sk_newbuf(sc_if, i, 1); 714 if (error) { 715 if_printf(&sc_if->arpcom.ac_if, 716 "failed alloc of %dth mbuf\n", i); 717 return error; 718 } 719 } 720 721 cd->sk_rx_prod = 0; 722 cd->sk_rx_cons = 0; 723 724 return (0); 725 } 726 727 static int 728 sk_init_tx_ring(struct sk_if_softc *sc_if) 729 { 730 struct sk_ring_data *rd = &sc_if->sk_rdata; 731 int i, nexti; 732 733 bzero(rd->sk_tx_ring, SK_TX_RING_SIZE); 734 735 for (i = 0; i < SK_TX_RING_CNT; i++) { 736 bus_addr_t paddr; 737 738 if (i == (SK_TX_RING_CNT - 1)) 739 nexti = 0; 740 else 741 nexti = i + 1; 742 paddr = rd->sk_tx_ring_paddr + 743 (nexti * sizeof(struct sk_tx_desc)); 744 745 rd->sk_tx_ring[i].sk_next = htole32(SK_ADDR_LO(paddr)); 746 } 747 748 sc_if->sk_cdata.sk_tx_prod = 0; 749 sc_if->sk_cdata.sk_tx_cons = 0; 750 sc_if->sk_cdata.sk_tx_cnt = 0; 751 752 return (0); 753 } 754 755 static int 756 sk_newbuf_jumbo(struct sk_if_softc *sc_if, int idx, int wait) 757 { 758 struct sk_jpool_entry *entry; 759 struct mbuf *m_new = NULL; 760 struct sk_rx_desc *r; 761 bus_addr_t paddr; 762 763 KKASSERT(idx < SK_RX_RING_CNT && idx >= 0); 764 765 MGETHDR(m_new, wait ? MB_WAIT : MB_DONTWAIT, MT_DATA); 766 if (m_new == NULL) 767 return ENOBUFS; 768 769 /* Allocate the jumbo buffer */ 770 entry = sk_jalloc(sc_if); 771 if (entry == NULL) { 772 m_freem(m_new); 773 DPRINTFN(1, ("%s jumbo allocation failed -- packet " 774 "dropped!\n", sc_if->arpcom.ac_if.if_xname)); 775 return ENOBUFS; 776 } 777 778 m_new->m_ext.ext_arg = entry; 779 m_new->m_ext.ext_buf = entry->buf; 780 m_new->m_ext.ext_free = sk_jfree; 781 m_new->m_ext.ext_ref = sk_jref; 782 m_new->m_ext.ext_size = SK_JLEN; 783 784 m_new->m_flags |= M_EXT; 785 786 m_new->m_data = m_new->m_ext.ext_buf; 787 m_new->m_len = m_new->m_pkthdr.len = m_new->m_ext.ext_size; 788 789 paddr = entry->paddr; 790 791 /* 792 * Adjust alignment so packet payload begins on a 793 * longword boundary. Mandatory for Alpha, useful on 794 * x86 too. 795 */ 796 m_adj(m_new, ETHER_ALIGN); 797 paddr += ETHER_ALIGN; 798 799 sc_if->sk_cdata.sk_rx_mbuf[idx] = m_new; 800 801 r = &sc_if->sk_rdata.sk_rx_ring[idx]; 802 r->sk_data_lo = htole32(SK_ADDR_LO(paddr)); 803 r->sk_data_hi = htole32(SK_ADDR_HI(paddr)); 804 r->sk_ctl = htole32(m_new->m_pkthdr.len | SK_RXSTAT); 805 806 return 0; 807 } 808 809 static int 810 sk_newbuf_std(struct sk_if_softc *sc_if, int idx, int wait) 811 { 812 struct mbuf *m_new = NULL; 813 struct sk_chain_data *cd = &sc_if->sk_cdata; 814 struct sk_rx_desc *r; 815 bus_dma_segment_t seg; 816 bus_dmamap_t map; 817 int error, nseg; 818 819 KKASSERT(idx < SK_RX_RING_CNT && idx >= 0); 820 821 m_new = m_getcl(wait ? MB_WAIT : MB_DONTWAIT, MT_DATA, M_PKTHDR); 822 if (m_new == NULL) 823 return ENOBUFS; 824 825 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 826 827 /* 828 * Adjust alignment so packet payload begins on a 829 * longword boundary. Mandatory for Alpha, useful on 830 * x86 too. 831 */ 832 m_adj(m_new, ETHER_ALIGN); 833 834 error = bus_dmamap_load_mbuf_segment(cd->sk_rx_dtag, cd->sk_rx_dmap_tmp, 835 m_new, &seg, 1, &nseg, BUS_DMA_NOWAIT); 836 if (error) { 837 m_freem(m_new); 838 if (wait) { 839 if_printf(&sc_if->arpcom.ac_if, 840 "could not map RX mbuf\n"); 841 } 842 return error; 843 } 844 845 /* Unload originally mapped mbuf */ 846 if (cd->sk_rx_mbuf[idx] != NULL) { 847 bus_dmamap_sync(cd->sk_rx_dtag, cd->sk_rx_dmap[idx], 848 BUS_DMASYNC_POSTREAD); 849 bus_dmamap_unload(cd->sk_rx_dtag, cd->sk_rx_dmap[idx]); 850 } 851 852 /* Switch DMA map with tmp DMA map */ 853 map = cd->sk_rx_dmap_tmp; 854 cd->sk_rx_dmap_tmp = cd->sk_rx_dmap[idx]; 855 cd->sk_rx_dmap[idx] = map; 856 857 cd->sk_rx_mbuf[idx] = m_new; 858 859 r = &sc_if->sk_rdata.sk_rx_ring[idx]; 860 r->sk_data_lo = htole32(SK_ADDR_LO(seg.ds_addr)); 861 r->sk_data_hi = htole32(SK_ADDR_HI(seg.ds_addr)); 862 r->sk_ctl = htole32(m_new->m_pkthdr.len | SK_RXSTAT); 863 864 return 0; 865 } 866 867 /* 868 * Allocate a jumbo buffer. 869 */ 870 struct sk_jpool_entry * 871 sk_jalloc(struct sk_if_softc *sc_if) 872 { 873 struct sk_chain_data *cd = &sc_if->sk_cdata; 874 struct sk_jpool_entry *entry; 875 876 lwkt_serialize_enter(&cd->sk_jpool_serializer); 877 878 entry = SLIST_FIRST(&cd->sk_jpool_free_ent); 879 if (entry != NULL) { 880 SLIST_REMOVE_HEAD(&cd->sk_jpool_free_ent, entry_next); 881 entry->inuse = 1; 882 } else { 883 DPRINTF(("no free jumbo buffer\n")); 884 } 885 886 lwkt_serialize_exit(&cd->sk_jpool_serializer); 887 return entry; 888 } 889 890 /* 891 * Release a jumbo buffer. 892 */ 893 void 894 sk_jfree(void *arg) 895 { 896 struct sk_jpool_entry *entry = arg; 897 struct sk_chain_data *cd = &entry->sc_if->sk_cdata; 898 899 if (&cd->sk_jpool_ent[entry->slot] != entry) 900 panic("%s: free wrong jumbo buffer\n", __func__); 901 else if (entry->inuse == 0) 902 panic("%s: jumbo buffer already freed\n", __func__); 903 904 lwkt_serialize_enter(&cd->sk_jpool_serializer); 905 906 atomic_subtract_int(&entry->inuse, 1); 907 if (entry->inuse == 0) 908 SLIST_INSERT_HEAD(&cd->sk_jpool_free_ent, entry, entry_next); 909 910 lwkt_serialize_exit(&cd->sk_jpool_serializer); 911 } 912 913 static void 914 sk_jref(void *arg) 915 { 916 struct sk_jpool_entry *entry = arg; 917 struct sk_chain_data *cd = &entry->sc_if->sk_cdata; 918 919 if (&cd->sk_jpool_ent[entry->slot] != entry) 920 panic("%s: free wrong jumbo buffer\n", __func__); 921 else if (entry->inuse == 0) 922 panic("%s: jumbo buffer already freed\n", __func__); 923 924 atomic_add_int(&entry->inuse, 1); 925 } 926 927 /* 928 * Set media options. 929 */ 930 static int 931 sk_ifmedia_upd(struct ifnet *ifp) 932 { 933 struct sk_if_softc *sc_if = ifp->if_softc; 934 struct mii_data *mii; 935 936 mii = device_get_softc(sc_if->sk_miibus); 937 sk_init(sc_if); 938 mii_mediachg(mii); 939 940 return(0); 941 } 942 943 /* 944 * Report current media status. 945 */ 946 static void 947 sk_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 948 { 949 struct sk_if_softc *sc_if; 950 struct mii_data *mii; 951 952 sc_if = ifp->if_softc; 953 mii = device_get_softc(sc_if->sk_miibus); 954 955 mii_pollstat(mii); 956 ifmr->ifm_active = mii->mii_media_active; 957 ifmr->ifm_status = mii->mii_media_status; 958 } 959 960 static int 961 sk_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 962 { 963 struct sk_if_softc *sc_if = ifp->if_softc; 964 struct ifreq *ifr = (struct ifreq *)data; 965 struct mii_data *mii; 966 int error = 0; 967 968 ASSERT_SERIALIZED(ifp->if_serializer); 969 970 switch(command) { 971 case SIOCSIFMTU: 972 if (ifr->ifr_mtu > SK_JUMBO_MTU) 973 error = EINVAL; 974 else { 975 ifp->if_mtu = ifr->ifr_mtu; 976 ifp->if_flags &= ~IFF_RUNNING; 977 sk_init(sc_if); 978 } 979 break; 980 case SIOCSIFFLAGS: 981 if (ifp->if_flags & IFF_UP) { 982 if (ifp->if_flags & IFF_RUNNING) { 983 if ((ifp->if_flags ^ sc_if->sk_if_flags) 984 & IFF_PROMISC) { 985 sk_setpromisc(sc_if); 986 sk_setmulti(sc_if); 987 } 988 } else 989 sk_init(sc_if); 990 } else { 991 if (ifp->if_flags & IFF_RUNNING) 992 sk_stop(sc_if); 993 } 994 sc_if->sk_if_flags = ifp->if_flags; 995 break; 996 case SIOCADDMULTI: 997 case SIOCDELMULTI: 998 sk_setmulti(sc_if); 999 break; 1000 case SIOCGIFMEDIA: 1001 case SIOCSIFMEDIA: 1002 mii = device_get_softc(sc_if->sk_miibus); 1003 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 1004 break; 1005 default: 1006 error = ether_ioctl(ifp, command, data); 1007 break; 1008 } 1009 1010 return(error); 1011 } 1012 1013 /* 1014 * Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device 1015 * IDs against our list and return a device name if we find a match. 1016 */ 1017 static int 1018 skc_probe(device_t dev) 1019 { 1020 const struct skc_type *t; 1021 uint16_t vid, did; 1022 1023 vid = pci_get_vendor(dev); 1024 did = pci_get_device(dev); 1025 1026 /* 1027 * Only attach to rev.2 of the Linksys EG1032 adapter. 1028 * Rev.3 is supported by re(4). 1029 */ 1030 if (vid == PCI_VENDOR_LINKSYS && 1031 did == PCI_PRODUCT_LINKSYS_EG1032 && 1032 pci_get_subdevice(dev) != SUBDEVICEID_LINKSYS_EG1032_REV2) 1033 return ENXIO; 1034 1035 for (t = skc_devs; t->skc_name != NULL; t++) { 1036 if (vid == t->skc_vid && did == t->skc_did) { 1037 device_set_desc(dev, t->skc_name); 1038 return 0; 1039 } 1040 } 1041 return ENXIO; 1042 } 1043 1044 /* 1045 * Force the GEnesis into reset, then bring it out of reset. 1046 */ 1047 static void 1048 sk_reset(struct sk_softc *sc) 1049 { 1050 DPRINTFN(2, ("sk_reset\n")); 1051 1052 CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_RESET); 1053 CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_RESET); 1054 if (SK_IS_YUKON(sc)) 1055 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_SET); 1056 1057 DELAY(1000); 1058 CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_UNRESET); 1059 DELAY(2); 1060 CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_UNRESET); 1061 if (SK_IS_YUKON(sc)) 1062 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_CLEAR); 1063 1064 DPRINTFN(2, ("sk_reset: sk_csr=%x\n", CSR_READ_2(sc, SK_CSR))); 1065 DPRINTFN(2, ("sk_reset: sk_link_ctrl=%x\n", 1066 CSR_READ_2(sc, SK_LINK_CTRL))); 1067 1068 if (SK_IS_GENESIS(sc)) { 1069 /* Configure packet arbiter */ 1070 sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET); 1071 sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT); 1072 sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT); 1073 sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT); 1074 sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT); 1075 } 1076 1077 /* Enable RAM interface */ 1078 sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET); 1079 1080 /* 1081 * Configure interrupt moderation. The moderation timer 1082 * defers interrupts specified in the interrupt moderation 1083 * timer mask based on the timeout specified in the interrupt 1084 * moderation timer init register. Each bit in the timer 1085 * register represents one tick, so to specify a timeout in 1086 * microseconds, we have to multiply by the correct number of 1087 * ticks-per-microsecond. 1088 */ 1089 KKASSERT(sc->sk_imtimer_ticks != 0 && sc->sk_imtime != 0); 1090 sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(sc, sc->sk_imtime)); 1091 sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF| 1092 SK_ISR_RX1_EOF|SK_ISR_RX2_EOF); 1093 sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START); 1094 } 1095 1096 static int 1097 sk_probe(device_t dev) 1098 { 1099 struct sk_softc *sc = device_get_softc(device_get_parent(dev)); 1100 const char *revstr = "", *name = NULL; 1101 char devname[80]; 1102 1103 switch (sc->sk_type) { 1104 case SK_GENESIS: 1105 name = "SysKonnect GEnesis"; 1106 break; 1107 case SK_YUKON: 1108 name = "Marvell Yukon"; 1109 break; 1110 case SK_YUKON_LITE: 1111 name = "Marvell Yukon Lite"; 1112 switch (sc->sk_rev) { 1113 case SK_YUKON_LITE_REV_A0: 1114 revstr = " rev.A0"; 1115 break; 1116 case SK_YUKON_LITE_REV_A1: 1117 revstr = " rev.A1"; 1118 break; 1119 case SK_YUKON_LITE_REV_A3: 1120 revstr = " rev.A3"; 1121 break; 1122 } 1123 break; 1124 case SK_YUKON_LP: 1125 name = "Marvell Yukon LP"; 1126 break; 1127 default: 1128 return ENXIO; 1129 } 1130 1131 ksnprintf(devname, sizeof(devname), "%s%s (0x%x)", 1132 name, revstr, sc->sk_rev); 1133 device_set_desc_copy(dev, devname); 1134 return 0; 1135 } 1136 1137 /* 1138 * Each XMAC chip is attached as a separate logical IP interface. 1139 * Single port cards will have only one logical interface of course. 1140 */ 1141 static int 1142 sk_attach(device_t dev) 1143 { 1144 struct sk_softc *sc = device_get_softc(device_get_parent(dev)); 1145 struct sk_if_softc *sc_if = device_get_softc(dev); 1146 struct ifnet *ifp = &sc_if->arpcom.ac_if; 1147 int i, error, if_attached = 0; 1148 1149 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 1150 1151 sc_if->sk_port = *(int *)device_get_ivars(dev); 1152 KKASSERT(sc_if->sk_port == SK_PORT_A || sc_if->sk_port == SK_PORT_B); 1153 1154 sc_if->sk_softc = sc; 1155 sc->sk_if[sc_if->sk_port] = sc_if; 1156 1157 kfree(device_get_ivars(dev), M_DEVBUF); 1158 device_set_ivars(dev, NULL); 1159 1160 if (sc_if->sk_port == SK_PORT_A) 1161 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR0; 1162 if (sc_if->sk_port == SK_PORT_B) 1163 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR1; 1164 1165 DPRINTFN(2, ("begin sk_attach: port=%d\n", sc_if->sk_port)); 1166 1167 /* 1168 * Get station address for this interface. Note that 1169 * dual port cards actually come with three station 1170 * addresses: one for each port, plus an extra. The 1171 * extra one is used by the SysKonnect driver software 1172 * as a 'virtual' station address for when both ports 1173 * are operating in failover mode. Currently we don't 1174 * use this extra address. 1175 */ 1176 for (i = 0; i < ETHER_ADDR_LEN; i++) { 1177 /* XXX */ 1178 sc_if->arpcom.ac_enaddr[i] = 1179 sk_win_read_1(sc, SK_MAC0_0 + (sc_if->sk_port * 8) + i); 1180 } 1181 1182 /* 1183 * Set up RAM buffer addresses. The NIC will have a certain 1184 * amount of SRAM on it, somewhere between 512K and 2MB. We 1185 * need to divide this up a) between the transmitter and 1186 * receiver and b) between the two XMACs, if this is a 1187 * dual port NIC. Our algorithm is to divide up the memory 1188 * evenly so that everyone gets a fair share. 1189 */ 1190 if (sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC) { 1191 uint32_t chunk, val; 1192 1193 chunk = sc->sk_ramsize / 2; 1194 val = sc->sk_rboff / sizeof(uint64_t); 1195 sc_if->sk_rx_ramstart = val; 1196 val += (chunk / sizeof(uint64_t)); 1197 sc_if->sk_rx_ramend = val - 1; 1198 sc_if->sk_tx_ramstart = val; 1199 val += (chunk / sizeof(uint64_t)); 1200 sc_if->sk_tx_ramend = val - 1; 1201 } else { 1202 uint32_t chunk, val; 1203 1204 chunk = sc->sk_ramsize / 4; 1205 val = (sc->sk_rboff + (chunk * 2 * sc_if->sk_port)) / 1206 sizeof(uint64_t); 1207 sc_if->sk_rx_ramstart = val; 1208 val += (chunk / sizeof(uint64_t)); 1209 sc_if->sk_rx_ramend = val - 1; 1210 sc_if->sk_tx_ramstart = val; 1211 val += (chunk / sizeof(uint64_t)); 1212 sc_if->sk_tx_ramend = val - 1; 1213 } 1214 1215 DPRINTFN(2, ("sk_attach: rx_ramstart=%#x rx_ramend=%#x\n" 1216 " tx_ramstart=%#x tx_ramend=%#x\n", 1217 sc_if->sk_rx_ramstart, sc_if->sk_rx_ramend, 1218 sc_if->sk_tx_ramstart, sc_if->sk_tx_ramend)); 1219 1220 /* Read and save PHY type */ 1221 sc_if->sk_phytype = sk_win_read_1(sc, SK_EPROM1) & 0xF; 1222 1223 /* Set PHY address */ 1224 if (SK_IS_GENESIS(sc)) { 1225 switch (sc_if->sk_phytype) { 1226 case SK_PHYTYPE_XMAC: 1227 sc_if->sk_phyaddr = SK_PHYADDR_XMAC; 1228 break; 1229 case SK_PHYTYPE_BCOM: 1230 sc_if->sk_phyaddr = SK_PHYADDR_BCOM; 1231 break; 1232 default: 1233 device_printf(dev, "unsupported PHY type: %d\n", 1234 sc_if->sk_phytype); 1235 error = ENXIO; 1236 goto fail; 1237 } 1238 } 1239 1240 if (SK_IS_YUKON(sc)) { 1241 if ((sc_if->sk_phytype < SK_PHYTYPE_MARV_COPPER && 1242 sc->sk_pmd != 'L' && sc->sk_pmd != 'S')) { 1243 /* not initialized, punt */ 1244 sc_if->sk_phytype = SK_PHYTYPE_MARV_COPPER; 1245 sc->sk_coppertype = 1; 1246 } 1247 1248 sc_if->sk_phyaddr = SK_PHYADDR_MARV; 1249 1250 if (!(sc->sk_coppertype)) 1251 sc_if->sk_phytype = SK_PHYTYPE_MARV_FIBER; 1252 } 1253 1254 error = sk_dma_alloc(dev); 1255 if (error) 1256 goto fail; 1257 1258 ifp->if_softc = sc_if; 1259 ifp->if_mtu = ETHERMTU; 1260 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1261 ifp->if_ioctl = sk_ioctl; 1262 ifp->if_start = sk_start; 1263 ifp->if_watchdog = sk_watchdog; 1264 ifp->if_init = sk_init; 1265 ifp->if_baudrate = 1000000000; 1266 ifq_set_maxlen(&ifp->if_snd, SK_TX_RING_CNT - 1); 1267 ifq_set_ready(&ifp->if_snd); 1268 1269 ifp->if_capabilities = IFCAP_VLAN_MTU; 1270 1271 /* Don't use jumbo buffers by default */ 1272 sc_if->sk_use_jumbo = 0; 1273 1274 /* 1275 * Call MI attach routines. 1276 * 1277 * NOTE: 1278 * This must be done before following sk_init_xxx(), in which 1279 * if_multiaddrs will be used. 1280 */ 1281 ether_ifattach(ifp, sc_if->arpcom.ac_enaddr, &sc->sk_serializer); 1282 if_attached = 1; 1283 1284 /* 1285 * Do miibus setup. 1286 */ 1287 switch (sc->sk_type) { 1288 case SK_GENESIS: 1289 sk_init_xmac(sc_if); 1290 break; 1291 case SK_YUKON: 1292 case SK_YUKON_LITE: 1293 case SK_YUKON_LP: 1294 sk_init_yukon(sc_if); 1295 break; 1296 default: 1297 device_printf(dev, "unknown device type %d\n", sc->sk_type); 1298 error = ENXIO; 1299 goto fail; 1300 } 1301 1302 DPRINTFN(2, ("sk_attach: 1\n")); 1303 1304 error = mii_phy_probe(dev, &sc_if->sk_miibus, 1305 sk_ifmedia_upd, sk_ifmedia_sts); 1306 if (error) { 1307 device_printf(dev, "no PHY found!\n"); 1308 goto fail; 1309 } 1310 1311 callout_init(&sc_if->sk_tick_timer); 1312 1313 DPRINTFN(2, ("sk_attach: end\n")); 1314 return 0; 1315 fail: 1316 if (if_attached) 1317 ether_ifdetach(ifp); 1318 sk_detach(dev); 1319 sc->sk_if[sc_if->sk_port] = NULL; 1320 return error; 1321 } 1322 1323 /* 1324 * Attach the interface. Allocate softc structures, do ifmedia 1325 * setup and ethernet/BPF attach. 1326 */ 1327 static int 1328 skc_attach(device_t dev) 1329 { 1330 struct sk_softc *sc = device_get_softc(dev); 1331 uint8_t skrs; 1332 int *port; 1333 int error, cpuid; 1334 1335 DPRINTFN(2, ("begin skc_attach\n")); 1336 1337 sc->sk_dev = dev; 1338 lwkt_serialize_init(&sc->sk_serializer); 1339 1340 #ifndef BURN_BRIDGES 1341 /* 1342 * Handle power management nonsense. 1343 */ 1344 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { 1345 uint32_t iobase, membase, irq; 1346 1347 /* Save important PCI config data. */ 1348 iobase = pci_read_config(dev, SK_PCI_LOIO, 4); 1349 membase = pci_read_config(dev, SK_PCI_LOMEM, 4); 1350 irq = pci_read_config(dev, SK_PCI_INTLINE, 4); 1351 1352 /* Reset the power state. */ 1353 device_printf(dev, "chip is in D%d power mode " 1354 "-- setting to D0\n", pci_get_powerstate(dev)); 1355 1356 pci_set_powerstate(dev, PCI_POWERSTATE_D0); 1357 1358 /* Restore PCI config data. */ 1359 pci_write_config(dev, SK_PCI_LOIO, iobase, 4); 1360 pci_write_config(dev, SK_PCI_LOMEM, membase, 4); 1361 pci_write_config(dev, SK_PCI_INTLINE, irq, 4); 1362 } 1363 #endif /* BURN_BRIDGES */ 1364 1365 /* 1366 * Map control/status registers. 1367 */ 1368 pci_enable_busmaster(dev); 1369 1370 sc->sk_res_rid = SK_PCI_LOMEM; 1371 sc->sk_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 1372 &sc->sk_res_rid, RF_ACTIVE); 1373 if (sc->sk_res == NULL) { 1374 device_printf(dev, "couldn't map memory\n"); 1375 error = ENXIO; 1376 goto fail; 1377 } 1378 sc->sk_btag = rman_get_bustag(sc->sk_res); 1379 sc->sk_bhandle = rman_get_bushandle(sc->sk_res); 1380 1381 sc->sk_type = sk_win_read_1(sc, SK_CHIPVER); 1382 sc->sk_rev = (sk_win_read_1(sc, SK_CONFIG) >> 4); 1383 1384 /* Bail out here if chip is not recognized */ 1385 if (!SK_IS_GENESIS(sc) && !SK_IS_YUKON(sc)) { 1386 device_printf(dev, "unknown chip type: %d\n", sc->sk_type); 1387 error = ENXIO; 1388 goto fail; 1389 } 1390 1391 DPRINTFN(2, ("skc_attach: allocate interrupt\n")); 1392 1393 /* Allocate interrupt */ 1394 sc->sk_irq_rid = 0; 1395 sc->sk_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->sk_irq_rid, 1396 RF_SHAREABLE | RF_ACTIVE); 1397 if (sc->sk_irq == NULL) { 1398 device_printf(dev, "couldn't map interrupt\n"); 1399 error = ENXIO; 1400 goto fail; 1401 } 1402 1403 switch (sc->sk_type) { 1404 case SK_GENESIS: 1405 sc->sk_imtimer_ticks = SK_IMTIMER_TICKS_GENESIS; 1406 break; 1407 default: 1408 sc->sk_imtimer_ticks = SK_IMTIMER_TICKS_YUKON; 1409 break; 1410 } 1411 sc->sk_imtime = skc_imtime; 1412 1413 /* Reset the adapter. */ 1414 sk_reset(sc); 1415 1416 skrs = sk_win_read_1(sc, SK_EPROM0); 1417 if (SK_IS_GENESIS(sc)) { 1418 /* Read and save RAM size and RAMbuffer offset */ 1419 switch(skrs) { 1420 case SK_RAMSIZE_512K_64: 1421 sc->sk_ramsize = 0x80000; 1422 sc->sk_rboff = SK_RBOFF_0; 1423 break; 1424 case SK_RAMSIZE_1024K_64: 1425 sc->sk_ramsize = 0x100000; 1426 sc->sk_rboff = SK_RBOFF_80000; 1427 break; 1428 case SK_RAMSIZE_1024K_128: 1429 sc->sk_ramsize = 0x100000; 1430 sc->sk_rboff = SK_RBOFF_0; 1431 break; 1432 case SK_RAMSIZE_2048K_128: 1433 sc->sk_ramsize = 0x200000; 1434 sc->sk_rboff = SK_RBOFF_0; 1435 break; 1436 default: 1437 device_printf(dev, "unknown ram size: %d\n", skrs); 1438 error = ENXIO; 1439 goto fail; 1440 } 1441 } else { 1442 if (skrs == 0x00) 1443 sc->sk_ramsize = 0x20000; 1444 else 1445 sc->sk_ramsize = skrs * (1<<12); 1446 sc->sk_rboff = SK_RBOFF_0; 1447 } 1448 1449 DPRINTFN(2, ("skc_attach: ramsize=%d (%dk), rboff=%d\n", 1450 sc->sk_ramsize, sc->sk_ramsize / 1024, 1451 sc->sk_rboff)); 1452 1453 /* Read and save physical media type */ 1454 sc->sk_pmd = sk_win_read_1(sc, SK_PMDTYPE); 1455 1456 if (sc->sk_pmd == 'T' || sc->sk_pmd == '1') 1457 sc->sk_coppertype = 1; 1458 else 1459 sc->sk_coppertype = 0; 1460 1461 /* Yukon Lite Rev A0 needs special test, from sk98lin driver */ 1462 if (sc->sk_type == SK_YUKON || sc->sk_type == SK_YUKON_LP) { 1463 uint32_t flashaddr; 1464 uint8_t testbyte; 1465 1466 flashaddr = sk_win_read_4(sc, SK_EP_ADDR); 1467 1468 /* Test Flash-Address Register */ 1469 sk_win_write_1(sc, SK_EP_ADDR+3, 0xff); 1470 testbyte = sk_win_read_1(sc, SK_EP_ADDR+3); 1471 1472 if (testbyte != 0) { 1473 /* This is a Yukon Lite Rev A0 */ 1474 sc->sk_type = SK_YUKON_LITE; 1475 sc->sk_rev = SK_YUKON_LITE_REV_A0; 1476 /* Restore Flash-Address Register */ 1477 sk_win_write_4(sc, SK_EP_ADDR, flashaddr); 1478 } 1479 } 1480 1481 /* 1482 * Create sysctl nodes. 1483 */ 1484 sysctl_ctx_init(&sc->sk_sysctl_ctx); 1485 sc->sk_sysctl_tree = SYSCTL_ADD_NODE(&sc->sk_sysctl_ctx, 1486 SYSCTL_STATIC_CHILDREN(_hw), 1487 OID_AUTO, 1488 device_get_nameunit(dev), 1489 CTLFLAG_RD, 0, ""); 1490 if (sc->sk_sysctl_tree == NULL) { 1491 device_printf(dev, "can't add sysctl node\n"); 1492 error = ENXIO; 1493 goto fail; 1494 } 1495 SYSCTL_ADD_PROC(&sc->sk_sysctl_ctx, 1496 SYSCTL_CHILDREN(sc->sk_sysctl_tree), 1497 OID_AUTO, "imtime", CTLTYPE_INT | CTLFLAG_RW, 1498 sc, 0, skc_sysctl_imtime, "I", 1499 "Interrupt moderation time (usec)."); 1500 1501 sc->sk_devs[SK_PORT_A] = device_add_child(dev, "sk", -1); 1502 port = kmalloc(sizeof(*port), M_DEVBUF, M_WAITOK); 1503 *port = SK_PORT_A; 1504 device_set_ivars(sc->sk_devs[SK_PORT_A], port); 1505 1506 if (!(sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC)) { 1507 sc->sk_devs[SK_PORT_B] = device_add_child(dev, "sk", -1); 1508 port = kmalloc(sizeof(*port), M_DEVBUF, M_WAITOK); 1509 *port = SK_PORT_B; 1510 device_set_ivars(sc->sk_devs[SK_PORT_B], port); 1511 } 1512 1513 /* Turn on the 'driver is loaded' LED. */ 1514 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON); 1515 1516 bus_generic_attach(dev); 1517 1518 error = bus_setup_intr(dev, sc->sk_irq, INTR_MPSAFE, sk_intr, sc, 1519 &sc->sk_intrhand, &sc->sk_serializer); 1520 if (error) { 1521 device_printf(dev, "couldn't set up irq\n"); 1522 goto fail; 1523 } 1524 1525 cpuid = ithread_cpuid(rman_get_start(sc->sk_irq)); 1526 KKASSERT(cpuid >= 0 && cpuid < ncpus); 1527 1528 if (sc->sk_if[0] != NULL) 1529 sc->sk_if[0]->arpcom.ac_if.if_cpuid = cpuid; 1530 if (sc->sk_if[1] != NULL) 1531 sc->sk_if[1]->arpcom.ac_if.if_cpuid = cpuid; 1532 1533 return 0; 1534 fail: 1535 skc_detach(dev); 1536 return error; 1537 } 1538 1539 static int 1540 sk_detach(device_t dev) 1541 { 1542 struct sk_if_softc *sc_if = device_get_softc(dev); 1543 1544 if (device_is_attached(dev)) { 1545 struct sk_softc *sc = sc_if->sk_softc; 1546 struct ifnet *ifp = &sc_if->arpcom.ac_if; 1547 1548 lwkt_serialize_enter(ifp->if_serializer); 1549 1550 if (sc->sk_intrhand != NULL) { 1551 if (sc->sk_if[SK_PORT_A] != NULL) 1552 sk_stop(sc->sk_if[SK_PORT_A]); 1553 if (sc->sk_if[SK_PORT_B] != NULL) 1554 sk_stop(sc->sk_if[SK_PORT_B]); 1555 1556 bus_teardown_intr(sc->sk_dev, sc->sk_irq, 1557 sc->sk_intrhand); 1558 sc->sk_intrhand = NULL; 1559 } 1560 1561 lwkt_serialize_exit(ifp->if_serializer); 1562 1563 ether_ifdetach(ifp); 1564 } 1565 1566 if (sc_if->sk_miibus != NULL) 1567 device_delete_child(dev, sc_if->sk_miibus); 1568 1569 sk_dma_free(dev); 1570 return 0; 1571 } 1572 1573 static int 1574 skc_detach(device_t dev) 1575 { 1576 struct sk_softc *sc = device_get_softc(dev); 1577 int *port; 1578 1579 #ifdef INVARIANTS 1580 if (device_is_attached(dev)) { 1581 KASSERT(sc->sk_intrhand == NULL, 1582 ("intr has not been torn down yet")); 1583 } 1584 #endif 1585 1586 if (sc->sk_devs[SK_PORT_A] != NULL) { 1587 port = device_get_ivars(sc->sk_devs[SK_PORT_A]); 1588 if (port != NULL) { 1589 kfree(port, M_DEVBUF); 1590 device_set_ivars(sc->sk_devs[SK_PORT_A], NULL); 1591 } 1592 device_delete_child(dev, sc->sk_devs[SK_PORT_A]); 1593 } 1594 if (sc->sk_devs[SK_PORT_B] != NULL) { 1595 port = device_get_ivars(sc->sk_devs[SK_PORT_B]); 1596 if (port != NULL) { 1597 kfree(port, M_DEVBUF); 1598 device_set_ivars(sc->sk_devs[SK_PORT_B], NULL); 1599 } 1600 device_delete_child(dev, sc->sk_devs[SK_PORT_B]); 1601 } 1602 1603 if (sc->sk_irq != NULL) { 1604 bus_release_resource(dev, SYS_RES_IRQ, sc->sk_irq_rid, 1605 sc->sk_irq); 1606 } 1607 if (sc->sk_res != NULL) { 1608 bus_release_resource(dev, SYS_RES_MEMORY, sc->sk_res_rid, 1609 sc->sk_res); 1610 } 1611 1612 if (sc->sk_sysctl_tree != NULL) 1613 sysctl_ctx_free(&sc->sk_sysctl_ctx); 1614 1615 return 0; 1616 } 1617 1618 static int 1619 sk_encap(struct sk_if_softc *sc_if, struct mbuf **m_head0, uint32_t *txidx) 1620 { 1621 struct sk_chain_data *cd = &sc_if->sk_cdata; 1622 struct sk_ring_data *rd = &sc_if->sk_rdata; 1623 struct sk_tx_desc *f = NULL; 1624 uint32_t frag, cur, sk_ctl; 1625 bus_dma_segment_t segs[SK_NTXSEG]; 1626 bus_dmamap_t map; 1627 int i, error, maxsegs, nsegs; 1628 1629 DPRINTFN(2, ("sk_encap\n")); 1630 1631 maxsegs = SK_TX_RING_CNT - sc_if->sk_cdata.sk_tx_cnt - SK_NDESC_RESERVE; 1632 KASSERT(maxsegs >= SK_NDESC_SPARE, ("not enough spare TX desc\n")); 1633 if (maxsegs > SK_NTXSEG) 1634 maxsegs = SK_NTXSEG; 1635 1636 cur = frag = *txidx; 1637 1638 #ifdef SK_DEBUG 1639 if (skdebug >= 2) 1640 sk_dump_mbuf(*m_head0); 1641 #endif 1642 1643 map = cd->sk_tx_dmap[*txidx]; 1644 1645 error = bus_dmamap_load_mbuf_defrag(cd->sk_tx_dtag, map, m_head0, 1646 segs, maxsegs, &nsegs, BUS_DMA_NOWAIT); 1647 if (error) { 1648 m_freem(*m_head0); 1649 *m_head0 = NULL; 1650 return error; 1651 } 1652 1653 DPRINTFN(2, ("sk_encap: nsegs=%d\n", nsegs)); 1654 1655 /* Sync the DMA map. */ 1656 bus_dmamap_sync(cd->sk_tx_dtag, map, BUS_DMASYNC_PREWRITE); 1657 1658 for (i = 0; i < nsegs; i++) { 1659 f = &rd->sk_tx_ring[frag]; 1660 f->sk_data_lo = htole32(SK_ADDR_LO(segs[i].ds_addr)); 1661 f->sk_data_hi = htole32(SK_ADDR_HI(segs[i].ds_addr)); 1662 sk_ctl = segs[i].ds_len | SK_OPCODE_DEFAULT; 1663 if (i == 0) 1664 sk_ctl |= SK_TXCTL_FIRSTFRAG; 1665 else 1666 sk_ctl |= SK_TXCTL_OWN; 1667 f->sk_ctl = htole32(sk_ctl); 1668 cur = frag; 1669 SK_INC(frag, SK_TX_RING_CNT); 1670 } 1671 1672 cd->sk_tx_mbuf[cur] = *m_head0; 1673 /* Switch DMA map */ 1674 cd->sk_tx_dmap[*txidx] = cd->sk_tx_dmap[cur]; 1675 cd->sk_tx_dmap[cur] = map; 1676 1677 rd->sk_tx_ring[cur].sk_ctl |= 1678 htole32(SK_TXCTL_LASTFRAG|SK_TXCTL_EOF_INTR); 1679 rd->sk_tx_ring[*txidx].sk_ctl |= htole32(SK_TXCTL_OWN); 1680 1681 sc_if->sk_cdata.sk_tx_cnt += nsegs; 1682 1683 #ifdef SK_DEBUG 1684 if (skdebug >= 2) { 1685 struct sk_tx_desc *desc; 1686 uint32_t idx; 1687 1688 for (idx = *txidx; idx != frag; SK_INC(idx, SK_TX_RING_CNT)) { 1689 desc = &sc_if->sk_rdata->sk_tx_ring[idx]; 1690 sk_dump_txdesc(desc, idx); 1691 } 1692 } 1693 #endif 1694 1695 *txidx = frag; 1696 1697 DPRINTFN(2, ("sk_encap: completed successfully\n")); 1698 1699 return (0); 1700 } 1701 1702 static void 1703 sk_start(struct ifnet *ifp) 1704 { 1705 struct sk_if_softc *sc_if = ifp->if_softc; 1706 struct sk_softc *sc = sc_if->sk_softc; 1707 uint32_t idx = sc_if->sk_cdata.sk_tx_prod; 1708 int trans = 0; 1709 1710 DPRINTFN(2, ("sk_start\n")); 1711 1712 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 1713 return; 1714 1715 while (sc_if->sk_cdata.sk_tx_mbuf[idx] == NULL) { 1716 struct mbuf *m_head; 1717 1718 if (SK_IS_OACTIVE(sc_if)) { 1719 ifp->if_flags |= IFF_OACTIVE; 1720 break; 1721 } 1722 1723 m_head = ifq_dequeue(&ifp->if_snd, NULL); 1724 if (m_head == NULL) 1725 break; 1726 1727 /* 1728 * Pack the data into the transmit ring. If we 1729 * don't have room, set the OACTIVE flag and wait 1730 * for the NIC to drain the ring. 1731 */ 1732 if (sk_encap(sc_if, &m_head, &idx)) { 1733 if (sc_if->sk_cdata.sk_tx_cnt == 0) { 1734 continue; 1735 } else { 1736 ifp->if_flags |= IFF_OACTIVE; 1737 break; 1738 } 1739 } 1740 1741 trans = 1; 1742 BPF_MTAP(ifp, m_head); 1743 } 1744 if (!trans) 1745 return; 1746 1747 /* Transmit */ 1748 if (idx != sc_if->sk_cdata.sk_tx_prod) { 1749 sc_if->sk_cdata.sk_tx_prod = idx; 1750 CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START); 1751 1752 /* Set a timeout in case the chip goes out to lunch. */ 1753 ifp->if_timer = 5; 1754 } 1755 } 1756 1757 static void 1758 sk_watchdog(struct ifnet *ifp) 1759 { 1760 struct sk_if_softc *sc_if = ifp->if_softc; 1761 1762 ASSERT_SERIALIZED(ifp->if_serializer); 1763 /* 1764 * Reclaim first as there is a possibility of losing Tx completion 1765 * interrupts. 1766 */ 1767 sk_txeof(sc_if); 1768 if (sc_if->sk_cdata.sk_tx_cnt != 0) { 1769 if_printf(&sc_if->arpcom.ac_if, "watchdog timeout\n"); 1770 ifp->if_oerrors++; 1771 ifp->if_flags &= ~IFF_RUNNING; 1772 sk_init(sc_if); 1773 } 1774 } 1775 1776 static void 1777 skc_shutdown(device_t dev) 1778 { 1779 struct sk_softc *sc = device_get_softc(dev); 1780 1781 DPRINTFN(2, ("sk_shutdown\n")); 1782 1783 lwkt_serialize_enter(&sc->sk_serializer); 1784 1785 /* Turn off the 'driver is loaded' LED. */ 1786 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF); 1787 1788 /* 1789 * Reset the GEnesis controller. Doing this should also 1790 * assert the resets on the attached XMAC(s). 1791 */ 1792 sk_reset(sc); 1793 1794 lwkt_serialize_exit(&sc->sk_serializer); 1795 } 1796 1797 static __inline int 1798 sk_rxvalid(struct sk_softc *sc, uint32_t stat, uint32_t len) 1799 { 1800 if (sc->sk_type == SK_GENESIS) { 1801 if ((stat & XM_RXSTAT_ERRFRAME) == XM_RXSTAT_ERRFRAME || 1802 XM_RXSTAT_BYTES(stat) != len) 1803 return (0); 1804 } else { 1805 if ((stat & (YU_RXSTAT_CRCERR | YU_RXSTAT_LONGERR | 1806 YU_RXSTAT_MIIERR | YU_RXSTAT_BADFC | YU_RXSTAT_GOODFC | 1807 YU_RXSTAT_JABBER)) != 0 || 1808 (stat & YU_RXSTAT_RXOK) != YU_RXSTAT_RXOK || 1809 YU_RXSTAT_BYTES(stat) != len) 1810 return (0); 1811 } 1812 1813 return (1); 1814 } 1815 1816 static void 1817 sk_rxeof(struct sk_if_softc *sc_if) 1818 { 1819 struct sk_softc *sc = sc_if->sk_softc; 1820 struct ifnet *ifp = &sc_if->arpcom.ac_if; 1821 struct sk_chain_data *cd = &sc_if->sk_cdata; 1822 struct sk_ring_data *rd = &sc_if->sk_rdata; 1823 int i, reap, max_frmlen; 1824 1825 DPRINTFN(2, ("sk_rxeof\n")); 1826 1827 i = cd->sk_rx_prod; 1828 1829 if (sc_if->sk_use_jumbo) 1830 max_frmlen = SK_JUMBO_FRAMELEN; 1831 else 1832 max_frmlen = ETHER_MAX_LEN; 1833 1834 reap = 0; 1835 for (;;) { 1836 struct sk_rx_desc *cur_desc; 1837 uint32_t rxstat, sk_ctl; 1838 #ifdef SK_RXCSUM 1839 uint16_t csum1, csum2; 1840 #endif 1841 int cur, total_len; 1842 struct mbuf *m; 1843 1844 cur = i; 1845 cur_desc = &rd->sk_rx_ring[cur]; 1846 1847 sk_ctl = le32toh(cur_desc->sk_ctl); 1848 if (sk_ctl & SK_RXCTL_OWN) { 1849 /* Invalidate the descriptor -- it's not ready yet */ 1850 cd->sk_rx_prod = cur; 1851 break; 1852 } 1853 1854 rxstat = le32toh(cur_desc->sk_xmac_rxstat); 1855 total_len = SK_RXBYTES(le32toh(cur_desc->sk_ctl)); 1856 1857 #ifdef SK_RXCSUM 1858 csum1 = le16toh(cur_desc->sk_csum1); 1859 csum2 = le16toh(cur_desc->sk_csum2); 1860 #endif 1861 1862 m = cd->sk_rx_mbuf[cur]; 1863 1864 /* 1865 * Bump 'i' here, so we can keep going, even if the current 1866 * RX descriptor reaping fails later. 'i' shoult NOT be used 1867 * in the following processing any more. 1868 */ 1869 SK_INC(i, SK_RX_RING_CNT); 1870 reap = 1; 1871 1872 if ((sk_ctl & (SK_RXCTL_STATUS_VALID | SK_RXCTL_FIRSTFRAG | 1873 SK_RXCTL_LASTFRAG)) != (SK_RXCTL_STATUS_VALID | 1874 SK_RXCTL_FIRSTFRAG | SK_RXCTL_LASTFRAG) || 1875 total_len < SK_MIN_FRAMELEN || total_len > max_frmlen || 1876 sk_rxvalid(sc, rxstat, total_len) == 0) { 1877 ifp->if_ierrors++; 1878 cur_desc->sk_ctl = htole32(m->m_pkthdr.len | SK_RXSTAT); 1879 continue; 1880 } 1881 1882 /* 1883 * Try to allocate a new RX buffer. If that fails, 1884 * copy the packet to mbufs and put the RX buffer 1885 * back in the ring so it can be re-used. If 1886 * allocating mbufs fails, then we have to drop 1887 * the packet. 1888 */ 1889 if (sk_newbuf(sc_if, cur, 0)) { 1890 ifp->if_ierrors++; 1891 cur_desc->sk_ctl = htole32(m->m_pkthdr.len | SK_RXSTAT); 1892 continue; 1893 } else { 1894 m->m_pkthdr.rcvif = ifp; 1895 m->m_pkthdr.len = m->m_len = total_len; 1896 } 1897 1898 #ifdef SK_RXCSUM 1899 sk_rxcsum(ifp, m, csum1, csum2); 1900 #endif 1901 1902 ifp->if_ipackets++; 1903 ifp->if_input(ifp, m); 1904 } 1905 } 1906 1907 #ifdef SK_RXCSUM 1908 static void 1909 sk_rxcsum(struct ifnet *ifp, struct mbuf *m, 1910 const uint16_t csum1, const uint16_t csum2) 1911 { 1912 struct ether_header *eh; 1913 struct ip *ip; 1914 uint8_t *pp; 1915 int hlen, len, plen; 1916 uint16_t iph_csum, ipo_csum, ipd_csum, csum; 1917 1918 pp = mtod(m, uint8_t *); 1919 plen = m->m_pkthdr.len; 1920 if (plen < sizeof(*eh)) 1921 return; 1922 eh = (struct ether_header *)pp; 1923 iph_csum = in_addword(csum1, (~csum2 & 0xffff)); 1924 1925 if (eh->ether_type == htons(ETHERTYPE_VLAN)) { 1926 uint16_t *xp = (uint16_t *)pp; 1927 1928 xp = (uint16_t *)pp; 1929 if (xp[1] != htons(ETHERTYPE_IP)) 1930 return; 1931 iph_csum = in_addword(iph_csum, (~xp[0] & 0xffff)); 1932 iph_csum = in_addword(iph_csum, (~xp[1] & 0xffff)); 1933 xp = (uint16_t *)(pp + sizeof(struct ip)); 1934 iph_csum = in_addword(iph_csum, xp[0]); 1935 iph_csum = in_addword(iph_csum, xp[1]); 1936 pp += EVL_ENCAPLEN; 1937 } else if (eh->ether_type != htons(ETHERTYPE_IP)) { 1938 return; 1939 } 1940 1941 pp += sizeof(*eh); 1942 plen -= sizeof(*eh); 1943 1944 ip = (struct ip *)pp; 1945 1946 if (ip->ip_v != IPVERSION) 1947 return; 1948 1949 hlen = ip->ip_hl << 2; 1950 if (hlen < sizeof(struct ip)) 1951 return; 1952 if (hlen > ntohs(ip->ip_len)) 1953 return; 1954 1955 /* Don't deal with truncated or padded packets. */ 1956 if (plen != ntohs(ip->ip_len)) 1957 return; 1958 1959 len = hlen - sizeof(struct ip); 1960 if (len > 0) { 1961 uint16_t *p; 1962 1963 p = (uint16_t *)(ip + 1); 1964 ipo_csum = 0; 1965 for (ipo_csum = 0; len > 0; len -= sizeof(*p), p++) 1966 ipo_csum = in_addword(ipo_csum, *p); 1967 iph_csum = in_addword(iph_csum, ipo_csum); 1968 ipd_csum = in_addword(csum2, (~ipo_csum & 0xffff)); 1969 } else { 1970 ipd_csum = csum2; 1971 } 1972 1973 if (iph_csum != 0xffff) 1974 return; 1975 m->m_pkthdr.csum_flags = CSUM_IP_CHECKED | CSUM_IP_VALID; 1976 1977 if (ip->ip_off & htons(IP_MF | IP_OFFMASK)) 1978 return; /* ip frag, we're done for now */ 1979 1980 pp += hlen; 1981 1982 /* Only know checksum protocol for udp/tcp */ 1983 if (ip->ip_p == IPPROTO_UDP) { 1984 struct udphdr *uh = (struct udphdr *)pp; 1985 1986 if (uh->uh_sum == 0) /* udp with no checksum */ 1987 return; 1988 } else if (ip->ip_p != IPPROTO_TCP) { 1989 return; 1990 } 1991 1992 csum = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr, 1993 htonl(ntohs(ip->ip_len) - hlen + ip->ip_p) + ipd_csum); 1994 if (csum == 0xffff) { 1995 m->m_pkthdr.csum_data = csum; 1996 m->m_pkthdr.csum_flags |= (CSUM_DATA_VALID | CSUM_PSEUDO_HDR); 1997 } 1998 } 1999 #endif 2000 2001 static void 2002 sk_txeof(struct sk_if_softc *sc_if) 2003 { 2004 struct sk_chain_data *cd = &sc_if->sk_cdata; 2005 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2006 uint32_t idx; 2007 int reap = 0; 2008 2009 DPRINTFN(2, ("sk_txeof\n")); 2010 2011 /* 2012 * Go through our tx ring and free mbufs for those 2013 * frames that have been sent. 2014 */ 2015 idx = cd->sk_tx_cons; 2016 while (idx != cd->sk_tx_prod) { 2017 struct sk_tx_desc *cur_tx; 2018 uint32_t sk_ctl; 2019 2020 cur_tx = &sc_if->sk_rdata.sk_tx_ring[idx]; 2021 sk_ctl = le32toh(cur_tx->sk_ctl); 2022 #ifdef SK_DEBUG 2023 if (skdebug >= 2) 2024 sk_dump_txdesc(cur_tx, idx); 2025 #endif 2026 if (sk_ctl & SK_TXCTL_OWN) 2027 break; 2028 if (sk_ctl & SK_TXCTL_LASTFRAG) 2029 ifp->if_opackets++; 2030 if (cd->sk_tx_mbuf[idx] != NULL) { 2031 bus_dmamap_unload(cd->sk_tx_dtag, cd->sk_tx_dmap[idx]); 2032 m_freem(cd->sk_tx_mbuf[idx]); 2033 cd->sk_tx_mbuf[idx] = NULL; 2034 } 2035 sc_if->sk_cdata.sk_tx_cnt--; 2036 reap = 1; 2037 SK_INC(idx, SK_TX_RING_CNT); 2038 } 2039 2040 if (!SK_IS_OACTIVE(sc_if)) 2041 ifp->if_flags &= ~IFF_OACTIVE; 2042 2043 if (sc_if->sk_cdata.sk_tx_cnt == 0) 2044 ifp->if_timer = 0; 2045 2046 sc_if->sk_cdata.sk_tx_cons = idx; 2047 } 2048 2049 static void 2050 sk_tick(void *xsc_if) 2051 { 2052 struct sk_if_softc *sc_if = xsc_if; 2053 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2054 struct mii_data *mii = device_get_softc(sc_if->sk_miibus); 2055 int i; 2056 2057 DPRINTFN(2, ("sk_tick\n")); 2058 2059 lwkt_serialize_enter(ifp->if_serializer); 2060 2061 if ((ifp->if_flags & IFF_UP) == 0) { 2062 lwkt_serialize_exit(ifp->if_serializer); 2063 return; 2064 } 2065 2066 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 2067 sk_intr_bcom(sc_if); 2068 lwkt_serialize_exit(ifp->if_serializer); 2069 return; 2070 } 2071 2072 /* 2073 * According to SysKonnect, the correct way to verify that 2074 * the link has come back up is to poll bit 0 of the GPIO 2075 * register three times. This pin has the signal from the 2076 * link sync pin connected to it; if we read the same link 2077 * state 3 times in a row, we know the link is up. 2078 */ 2079 for (i = 0; i < 3; i++) { 2080 if (SK_XM_READ_2(sc_if, XM_GPIO) & XM_GPIO_GP0_SET) 2081 break; 2082 } 2083 2084 if (i != 3) { 2085 callout_reset(&sc_if->sk_tick_timer, hz, sk_tick, sc_if); 2086 lwkt_serialize_exit(ifp->if_serializer); 2087 return; 2088 } 2089 2090 /* Turn the GP0 interrupt back on. */ 2091 SK_XM_CLRBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET); 2092 SK_XM_READ_2(sc_if, XM_ISR); 2093 mii_tick(mii); 2094 callout_stop(&sc_if->sk_tick_timer); 2095 lwkt_serialize_exit(ifp->if_serializer); 2096 } 2097 2098 static void 2099 sk_yukon_tick(void *xsc_if) 2100 { 2101 struct sk_if_softc *sc_if = xsc_if; 2102 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2103 struct mii_data *mii = device_get_softc(sc_if->sk_miibus); 2104 2105 lwkt_serialize_enter(ifp->if_serializer); 2106 mii_tick(mii); 2107 callout_reset(&sc_if->sk_tick_timer, hz, sk_yukon_tick, sc_if); 2108 lwkt_serialize_exit(ifp->if_serializer); 2109 } 2110 2111 static void 2112 sk_intr_bcom(struct sk_if_softc *sc_if) 2113 { 2114 struct mii_data *mii = device_get_softc(sc_if->sk_miibus); 2115 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2116 int status; 2117 2118 DPRINTFN(2, ("sk_intr_bcom\n")); 2119 2120 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 2121 2122 /* 2123 * Read the PHY interrupt register to make sure 2124 * we clear any pending interrupts. 2125 */ 2126 status = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, BRGPHY_MII_ISR); 2127 2128 if ((ifp->if_flags & IFF_RUNNING) == 0) { 2129 sk_init_xmac(sc_if); 2130 return; 2131 } 2132 2133 if (status & (BRGPHY_ISR_LNK_CHG|BRGPHY_ISR_AN_PR)) { 2134 int lstat; 2135 2136 lstat = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, 2137 BRGPHY_MII_AUXSTS); 2138 2139 if (!(lstat & BRGPHY_AUXSTS_LINK) && sc_if->sk_link) { 2140 mii_mediachg(mii); 2141 /* Turn off the link LED. */ 2142 SK_IF_WRITE_1(sc_if, 0, 2143 SK_LINKLED1_CTL, SK_LINKLED_OFF); 2144 sc_if->sk_link = 0; 2145 } else if (status & BRGPHY_ISR_LNK_CHG) { 2146 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM, 2147 BRGPHY_MII_IMR, 0xFF00); 2148 mii_tick(mii); 2149 sc_if->sk_link = 1; 2150 /* Turn on the link LED. */ 2151 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, 2152 SK_LINKLED_ON|SK_LINKLED_LINKSYNC_OFF| 2153 SK_LINKLED_BLINK_OFF); 2154 } else { 2155 mii_tick(mii); 2156 callout_reset(&sc_if->sk_tick_timer, hz, 2157 sk_tick, sc_if); 2158 } 2159 } 2160 2161 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 2162 } 2163 2164 static void 2165 sk_intr_xmac(struct sk_if_softc *sc_if) 2166 { 2167 uint16_t status; 2168 2169 status = SK_XM_READ_2(sc_if, XM_ISR); 2170 DPRINTFN(2, ("sk_intr_xmac\n")); 2171 2172 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && 2173 (status & (XM_ISR_GP0_SET | XM_ISR_AUTONEG_DONE))) { 2174 if (status & XM_ISR_GP0_SET) 2175 SK_XM_SETBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET); 2176 2177 callout_reset(&sc_if->sk_tick_timer, hz, 2178 sk_tick, sc_if); 2179 } 2180 2181 if (status & XM_IMR_TX_UNDERRUN) 2182 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_TXFIFO); 2183 2184 if (status & XM_IMR_RX_OVERRUN) 2185 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_RXFIFO); 2186 } 2187 2188 static void 2189 sk_intr_yukon(struct sk_if_softc *sc_if) 2190 { 2191 uint8_t status; 2192 2193 status = SK_IF_READ_1(sc_if, 0, SK_GMAC_ISR); 2194 /* RX overrun */ 2195 if ((status & SK_GMAC_INT_RX_OVER) != 0) { 2196 SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, 2197 SK_RFCTL_RX_FIFO_OVER); 2198 } 2199 /* TX underrun */ 2200 if ((status & SK_GMAC_INT_TX_UNDER) != 0) { 2201 SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, 2202 SK_TFCTL_TX_FIFO_UNDER); 2203 } 2204 2205 DPRINTFN(2, ("sk_intr_yukon status=%#x\n", status)); 2206 } 2207 2208 static void 2209 sk_intr(void *xsc) 2210 { 2211 struct sk_softc *sc = xsc; 2212 struct sk_if_softc *sc_if0 = sc->sk_if[SK_PORT_A]; 2213 struct sk_if_softc *sc_if1 = sc->sk_if[SK_PORT_B]; 2214 struct ifnet *ifp0 = NULL, *ifp1 = NULL; 2215 uint32_t status; 2216 2217 ASSERT_SERIALIZED(&sc->sk_serializer); 2218 2219 status = CSR_READ_4(sc, SK_ISSR); 2220 if (status == 0 || status == 0xffffffff) 2221 return; 2222 2223 if (sc_if0 != NULL) 2224 ifp0 = &sc_if0->arpcom.ac_if; 2225 if (sc_if1 != NULL) 2226 ifp1 = &sc_if1->arpcom.ac_if; 2227 2228 for (; (status &= sc->sk_intrmask) != 0;) { 2229 /* Handle receive interrupts first. */ 2230 if (sc_if0 && (status & SK_ISR_RX1_EOF)) { 2231 sk_rxeof(sc_if0); 2232 CSR_WRITE_4(sc, SK_BMU_RX_CSR0, 2233 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START); 2234 } 2235 if (sc_if1 && (status & SK_ISR_RX2_EOF)) { 2236 sk_rxeof(sc_if1); 2237 CSR_WRITE_4(sc, SK_BMU_RX_CSR1, 2238 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START); 2239 } 2240 2241 /* Then transmit interrupts. */ 2242 if (sc_if0 && (status & SK_ISR_TX1_S_EOF)) { 2243 sk_txeof(sc_if0); 2244 CSR_WRITE_4(sc, SK_BMU_TXS_CSR0, 2245 SK_TXBMU_CLR_IRQ_EOF); 2246 } 2247 if (sc_if1 && (status & SK_ISR_TX2_S_EOF)) { 2248 sk_txeof(sc_if1); 2249 CSR_WRITE_4(sc, SK_BMU_TXS_CSR1, 2250 SK_TXBMU_CLR_IRQ_EOF); 2251 } 2252 2253 /* Then MAC interrupts. */ 2254 if (sc_if0 && (status & SK_ISR_MAC1) && 2255 (ifp0->if_flags & IFF_RUNNING)) { 2256 if (SK_IS_GENESIS(sc)) 2257 sk_intr_xmac(sc_if0); 2258 else 2259 sk_intr_yukon(sc_if0); 2260 } 2261 2262 if (sc_if1 && (status & SK_ISR_MAC2) && 2263 (ifp1->if_flags & IFF_RUNNING)) { 2264 if (SK_IS_GENESIS(sc)) 2265 sk_intr_xmac(sc_if1); 2266 else 2267 sk_intr_yukon(sc_if1); 2268 } 2269 2270 if (status & SK_ISR_EXTERNAL_REG) { 2271 if (sc_if0 != NULL && 2272 sc_if0->sk_phytype == SK_PHYTYPE_BCOM) 2273 sk_intr_bcom(sc_if0); 2274 2275 if (sc_if1 != NULL && 2276 sc_if1->sk_phytype == SK_PHYTYPE_BCOM) 2277 sk_intr_bcom(sc_if1); 2278 } 2279 status = CSR_READ_4(sc, SK_ISSR); 2280 } 2281 2282 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2283 2284 if (ifp0 != NULL && !ifq_is_empty(&ifp0->if_snd)) 2285 if_devstart(ifp0); 2286 if (ifp1 != NULL && !ifq_is_empty(&ifp1->if_snd)) 2287 if_devstart(ifp1); 2288 } 2289 2290 static void 2291 sk_init_xmac(struct sk_if_softc *sc_if) 2292 { 2293 struct sk_softc *sc = sc_if->sk_softc; 2294 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2295 static const struct sk_bcom_hack bhack[] = { 2296 { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 }, 2297 { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 }, 2298 { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, 2299 { 0, 0 } }; 2300 2301 DPRINTFN(2, ("sk_init_xmac\n")); 2302 2303 /* Unreset the XMAC. */ 2304 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_UNRESET); 2305 DELAY(1000); 2306 2307 /* Reset the XMAC's internal state. */ 2308 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); 2309 2310 /* Save the XMAC II revision */ 2311 sc_if->sk_xmac_rev = XM_XMAC_REV(SK_XM_READ_4(sc_if, XM_DEVID)); 2312 2313 /* 2314 * Perform additional initialization for external PHYs, 2315 * namely for the 1000baseT cards that use the XMAC's 2316 * GMII mode. 2317 */ 2318 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 2319 int i = 0; 2320 uint32_t val; 2321 2322 /* Take PHY out of reset. */ 2323 val = sk_win_read_4(sc, SK_GPIO); 2324 if (sc_if->sk_port == SK_PORT_A) 2325 val |= SK_GPIO_DIR0|SK_GPIO_DAT0; 2326 else 2327 val |= SK_GPIO_DIR2|SK_GPIO_DAT2; 2328 sk_win_write_4(sc, SK_GPIO, val); 2329 2330 /* Enable GMII mode on the XMAC. */ 2331 SK_XM_SETBIT_2(sc_if, XM_HWCFG, XM_HWCFG_GMIIMODE); 2332 2333 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM, 2334 BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET); 2335 DELAY(10000); 2336 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM, 2337 BRGPHY_MII_IMR, 0xFFF0); 2338 2339 /* 2340 * Early versions of the BCM5400 apparently have 2341 * a bug that requires them to have their reserved 2342 * registers initialized to some magic values. I don't 2343 * know what the numbers do, I'm just the messenger. 2344 */ 2345 if (sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, 0x03) 2346 == 0x6041) { 2347 while(bhack[i].reg) { 2348 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM, 2349 bhack[i].reg, bhack[i].val); 2350 i++; 2351 } 2352 } 2353 } 2354 2355 /* Set station address */ 2356 SK_XM_WRITE_2(sc_if, XM_PAR0, 2357 *(uint16_t *)(&sc_if->arpcom.ac_enaddr[0])); 2358 SK_XM_WRITE_2(sc_if, XM_PAR1, 2359 *(uint16_t *)(&sc_if->arpcom.ac_enaddr[2])); 2360 SK_XM_WRITE_2(sc_if, XM_PAR2, 2361 *(uint16_t *)(&sc_if->arpcom.ac_enaddr[4])); 2362 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_STATION); 2363 2364 if (ifp->if_flags & IFF_BROADCAST) 2365 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD); 2366 else 2367 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD); 2368 2369 /* We don't need the FCS appended to the packet. */ 2370 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_STRIPFCS); 2371 2372 /* We want short frames padded to 60 bytes. */ 2373 SK_XM_SETBIT_2(sc_if, XM_TXCMD, XM_TXCMD_AUTOPAD); 2374 2375 /* 2376 * Enable the reception of all error frames. This is 2377 * a necessary evil due to the design of the XMAC. The 2378 * XMAC's receive FIFO is only 8K in size, however jumbo 2379 * frames can be up to 9000 bytes in length. When bad 2380 * frame filtering is enabled, the XMAC's RX FIFO operates 2381 * in 'store and forward' mode. For this to work, the 2382 * entire frame has to fit into the FIFO, but that means 2383 * that jumbo frames larger than 8192 bytes will be 2384 * truncated. Disabling all bad frame filtering causes 2385 * the RX FIFO to operate in streaming mode, in which 2386 * case the XMAC will start transfering frames out of the 2387 * RX FIFO as soon as the FIFO threshold is reached. 2388 */ 2389 if (sc_if->sk_use_jumbo) { 2390 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES| 2391 XM_MODE_RX_GIANTS|XM_MODE_RX_RUNTS|XM_MODE_RX_CRCERRS| 2392 XM_MODE_RX_INRANGELEN); 2393 } 2394 2395 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK); 2396 2397 /* 2398 * Bump up the transmit threshold. This helps hold off transmit 2399 * underruns when we're blasting traffic from both ports at once. 2400 */ 2401 SK_XM_WRITE_2(sc_if, XM_TX_REQTHRESH, SK_XM_TX_FIFOTHRESH); 2402 2403 /* Set promiscuous mode */ 2404 sk_setpromisc(sc_if); 2405 2406 /* Set multicast filter */ 2407 sk_setmulti(sc_if); 2408 2409 /* Clear and enable interrupts */ 2410 SK_XM_READ_2(sc_if, XM_ISR); 2411 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) 2412 SK_XM_WRITE_2(sc_if, XM_IMR, XM_INTRS); 2413 else 2414 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF); 2415 2416 /* Configure MAC arbiter */ 2417 switch(sc_if->sk_xmac_rev) { 2418 case XM_XMAC_REV_B2: 2419 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_B2); 2420 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_B2); 2421 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_B2); 2422 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_B2); 2423 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_B2); 2424 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_B2); 2425 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_B2); 2426 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_B2); 2427 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2); 2428 break; 2429 case XM_XMAC_REV_C1: 2430 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_C1); 2431 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_C1); 2432 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_C1); 2433 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_C1); 2434 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_C1); 2435 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_C1); 2436 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_C1); 2437 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_C1); 2438 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2); 2439 break; 2440 default: 2441 break; 2442 } 2443 sk_win_write_2(sc, SK_MACARB_CTL, 2444 SK_MACARBCTL_UNRESET|SK_MACARBCTL_FASTOE_OFF); 2445 2446 sc_if->sk_link = 1; 2447 } 2448 2449 static void 2450 sk_init_yukon(struct sk_if_softc *sc_if) 2451 { 2452 uint32_t phy, v; 2453 uint16_t reg; 2454 struct sk_softc *sc; 2455 int i; 2456 2457 sc = sc_if->sk_softc; 2458 2459 DPRINTFN(2, ("sk_init_yukon: start: sk_csr=%#x\n", 2460 CSR_READ_4(sc_if->sk_softc, SK_CSR))); 2461 2462 if (sc->sk_type == SK_YUKON_LITE && 2463 sc->sk_rev >= SK_YUKON_LITE_REV_A3) { 2464 /* 2465 * Workaround code for COMA mode, set PHY reset. 2466 * Otherwise it will not correctly take chip out of 2467 * powerdown (coma) 2468 */ 2469 v = sk_win_read_4(sc, SK_GPIO); 2470 v |= SK_GPIO_DIR9 | SK_GPIO_DAT9; 2471 sk_win_write_4(sc, SK_GPIO, v); 2472 } 2473 2474 DPRINTFN(6, ("sk_init_yukon: 1\n")); 2475 2476 /* GMAC and GPHY Reset */ 2477 SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET); 2478 SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET); 2479 DELAY(1000); 2480 2481 DPRINTFN(6, ("sk_init_yukon: 2\n")); 2482 2483 if (sc->sk_type == SK_YUKON_LITE && 2484 sc->sk_rev >= SK_YUKON_LITE_REV_A3) { 2485 /* 2486 * Workaround code for COMA mode, clear PHY reset 2487 */ 2488 v = sk_win_read_4(sc, SK_GPIO); 2489 v |= SK_GPIO_DIR9; 2490 v &= ~SK_GPIO_DAT9; 2491 sk_win_write_4(sc, SK_GPIO, v); 2492 } 2493 2494 phy = SK_GPHY_INT_POL_HI | SK_GPHY_DIS_FC | SK_GPHY_DIS_SLEEP | 2495 SK_GPHY_ENA_XC | SK_GPHY_ANEG_ALL | SK_GPHY_ENA_PAUSE; 2496 2497 if (sc->sk_coppertype) 2498 phy |= SK_GPHY_COPPER; 2499 else 2500 phy |= SK_GPHY_FIBER; 2501 2502 DPRINTFN(3, ("sk_init_yukon: phy=%#x\n", phy)); 2503 2504 SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_SET); 2505 DELAY(1000); 2506 SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_CLEAR); 2507 SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF | 2508 SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR); 2509 2510 DPRINTFN(3, ("sk_init_yukon: gmac_ctrl=%#x\n", 2511 SK_IF_READ_4(sc_if, 0, SK_GMAC_CTRL))); 2512 2513 DPRINTFN(6, ("sk_init_yukon: 3\n")); 2514 2515 /* unused read of the interrupt source register */ 2516 DPRINTFN(6, ("sk_init_yukon: 4\n")); 2517 SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR); 2518 2519 DPRINTFN(6, ("sk_init_yukon: 4a\n")); 2520 reg = SK_YU_READ_2(sc_if, YUKON_PAR); 2521 DPRINTFN(6, ("sk_init_yukon: YUKON_PAR=%#x\n", reg)); 2522 2523 /* MIB Counter Clear Mode set */ 2524 reg |= YU_PAR_MIB_CLR; 2525 DPRINTFN(6, ("sk_init_yukon: YUKON_PAR=%#x\n", reg)); 2526 DPRINTFN(6, ("sk_init_yukon: 4b\n")); 2527 SK_YU_WRITE_2(sc_if, YUKON_PAR, reg); 2528 2529 /* MIB Counter Clear Mode clear */ 2530 DPRINTFN(6, ("sk_init_yukon: 5\n")); 2531 reg &= ~YU_PAR_MIB_CLR; 2532 SK_YU_WRITE_2(sc_if, YUKON_PAR, reg); 2533 2534 /* receive control reg */ 2535 DPRINTFN(6, ("sk_init_yukon: 7\n")); 2536 SK_YU_WRITE_2(sc_if, YUKON_RCR, YU_RCR_CRCR); 2537 2538 /* transmit parameter register */ 2539 DPRINTFN(6, ("sk_init_yukon: 8\n")); 2540 SK_YU_WRITE_2(sc_if, YUKON_TPR, YU_TPR_JAM_LEN(0x3) | 2541 YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) ); 2542 2543 /* serial mode register */ 2544 DPRINTFN(6, ("sk_init_yukon: 9\n")); 2545 reg = YU_SMR_DATA_BLIND(0x1c) | YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e); 2546 if (sc_if->sk_use_jumbo) 2547 reg |= YU_SMR_MFL_JUMBO; 2548 SK_YU_WRITE_2(sc_if, YUKON_SMR, reg); 2549 2550 DPRINTFN(6, ("sk_init_yukon: 10\n")); 2551 /* Setup Yukon's address */ 2552 for (i = 0; i < 3; i++) { 2553 /* Write Source Address 1 (unicast filter) */ 2554 SK_YU_WRITE_2(sc_if, YUKON_SAL1 + i * 4, 2555 sc_if->arpcom.ac_enaddr[i * 2] | 2556 sc_if->arpcom.ac_enaddr[i * 2 + 1] << 8); 2557 } 2558 2559 for (i = 0; i < 3; i++) { 2560 reg = sk_win_read_2(sc_if->sk_softc, 2561 SK_MAC1_0 + i * 2 + sc_if->sk_port * 8); 2562 SK_YU_WRITE_2(sc_if, YUKON_SAL2 + i * 4, reg); 2563 } 2564 2565 /* Set promiscuous mode */ 2566 sk_setpromisc(sc_if); 2567 2568 /* Set multicast filter */ 2569 DPRINTFN(6, ("sk_init_yukon: 11\n")); 2570 sk_setmulti(sc_if); 2571 2572 /* enable interrupt mask for counter overflows */ 2573 DPRINTFN(6, ("sk_init_yukon: 12\n")); 2574 SK_YU_WRITE_2(sc_if, YUKON_TIMR, 0); 2575 SK_YU_WRITE_2(sc_if, YUKON_RIMR, 0); 2576 SK_YU_WRITE_2(sc_if, YUKON_TRIMR, 0); 2577 2578 /* Configure RX MAC FIFO Flush Mask */ 2579 v = YU_RXSTAT_FOFL | YU_RXSTAT_CRCERR | YU_RXSTAT_MIIERR | 2580 YU_RXSTAT_BADFC | YU_RXSTAT_GOODFC | YU_RXSTAT_RUNT | 2581 YU_RXSTAT_JABBER; 2582 SK_IF_WRITE_2(sc_if, 0, SK_RXMF1_FLUSH_MASK, v); 2583 2584 /* Disable RX MAC FIFO Flush for YUKON-Lite Rev. A0 only */ 2585 if (sc->sk_type == SK_YUKON_LITE && sc->sk_rev == SK_YUKON_LITE_REV_A0) 2586 v = SK_TFCTL_OPERATION_ON; 2587 else 2588 v = SK_TFCTL_OPERATION_ON | SK_RFCTL_FIFO_FLUSH_ON; 2589 /* Configure RX MAC FIFO */ 2590 SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_CLEAR); 2591 SK_IF_WRITE_2(sc_if, 0, SK_RXMF1_CTRL_TEST, v); 2592 2593 /* Increase flush threshould to 64 bytes */ 2594 SK_IF_WRITE_2(sc_if, 0, SK_RXMF1_FLUSH_THRESHOLD, 2595 SK_RFCTL_FIFO_THRESHOLD + 1); 2596 2597 /* Configure TX MAC FIFO */ 2598 SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_CLEAR); 2599 SK_IF_WRITE_2(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_OPERATION_ON); 2600 2601 DPRINTFN(6, ("sk_init_yukon: end\n")); 2602 } 2603 2604 /* 2605 * Note that to properly initialize any part of the GEnesis chip, 2606 * you first have to take it out of reset mode. 2607 */ 2608 static void 2609 sk_init(void *xsc_if) 2610 { 2611 struct sk_if_softc *sc_if = xsc_if; 2612 struct sk_softc *sc = sc_if->sk_softc; 2613 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2614 struct mii_data *mii = device_get_softc(sc_if->sk_miibus); 2615 2616 DPRINTFN(2, ("sk_init\n")); 2617 2618 ASSERT_SERIALIZED(ifp->if_serializer); 2619 2620 if (ifp->if_flags & IFF_RUNNING) 2621 return; 2622 2623 /* Cancel pending I/O and free all RX/TX buffers. */ 2624 sk_stop(sc_if); 2625 2626 /* 2627 * NOTE: Change sk_use_jumbo after sk_stop(), 2628 * but before real initialization. 2629 */ 2630 if (ifp->if_mtu > ETHER_MAX_LEN) 2631 sc_if->sk_use_jumbo = 1; 2632 else 2633 sc_if->sk_use_jumbo = 0; 2634 DPRINTF(("use jumbo buffer: %s\n", sc_if->sk_use_jumbo ? "YES" : "NO")); 2635 2636 if (SK_IS_GENESIS(sc)) { 2637 /* Configure LINK_SYNC LED */ 2638 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON); 2639 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, 2640 SK_LINKLED_LINKSYNC_ON); 2641 2642 /* Configure RX LED */ 2643 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, 2644 SK_RXLEDCTL_COUNTER_START); 2645 2646 /* Configure TX LED */ 2647 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, 2648 SK_TXLEDCTL_COUNTER_START); 2649 } 2650 2651 /* 2652 * Configure descriptor poll timer 2653 * 2654 * SK-NET GENESIS data sheet says that possibility of losing Start 2655 * transmit command due to CPU/cache related interim storage problems 2656 * under certain conditions. The document recommends a polling 2657 * mechanism to send a Start transmit command to initiate transfer 2658 * of ready descriptors regulary. To cope with this issue sk(4) now 2659 * enables descriptor poll timer to initiate descriptor processing 2660 * periodically as defined by SK_DPT_TIMER_MAX. However sk(4) still 2661 * issue SK_TXBMU_TX_START to Tx BMU to get fast execution of Tx 2662 * command instead of waiting for next descriptor polling time. 2663 * The same rule may apply to Rx side too but it seems that is not 2664 * needed at the moment. 2665 * Since sk(4) uses descriptor polling as a last resort there is no 2666 * need to set smaller polling time than maximum allowable one. 2667 */ 2668 SK_IF_WRITE_4(sc_if, 0, SK_DPT_INIT, SK_DPT_TIMER_MAX); 2669 2670 /* Configure I2C registers */ 2671 2672 /* Configure XMAC(s) */ 2673 switch (sc->sk_type) { 2674 case SK_GENESIS: 2675 sk_init_xmac(sc_if); 2676 break; 2677 case SK_YUKON: 2678 case SK_YUKON_LITE: 2679 case SK_YUKON_LP: 2680 sk_init_yukon(sc_if); 2681 break; 2682 } 2683 mii_mediachg(mii); 2684 2685 if (SK_IS_GENESIS(sc)) { 2686 /* Configure MAC FIFOs */ 2687 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET); 2688 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END); 2689 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON); 2690 2691 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET); 2692 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END); 2693 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON); 2694 } 2695 2696 /* Configure transmit arbiter(s) */ 2697 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, 2698 SK_TXARCTL_ON | SK_TXARCTL_FSYNC_ON); 2699 2700 /* Configure RAMbuffers */ 2701 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET); 2702 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart); 2703 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart); 2704 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart); 2705 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend); 2706 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON); 2707 2708 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_UNRESET); 2709 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_STORENFWD_ON); 2710 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_START, sc_if->sk_tx_ramstart); 2711 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_WR_PTR, sc_if->sk_tx_ramstart); 2712 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_RD_PTR, sc_if->sk_tx_ramstart); 2713 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_END, sc_if->sk_tx_ramend); 2714 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_ON); 2715 2716 /* Configure BMUs */ 2717 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_ONLINE); 2718 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_LO, 2719 SK_ADDR_LO(sc_if->sk_rdata.sk_rx_ring_paddr)); 2720 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_HI, 2721 SK_ADDR_HI(sc_if->sk_rdata.sk_rx_ring_paddr)); 2722 2723 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_ONLINE); 2724 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_LO, 2725 SK_ADDR_LO(sc_if->sk_rdata.sk_tx_ring_paddr)); 2726 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_HI, 2727 SK_ADDR_HI(sc_if->sk_rdata.sk_tx_ring_paddr)); 2728 2729 /* Init descriptors */ 2730 if (sk_init_rx_ring(sc_if) == ENOBUFS) { 2731 if_printf(ifp, "initialization failed: " 2732 "no memory for rx buffers\n"); 2733 sk_stop(sc_if); 2734 return; 2735 } 2736 2737 if (sk_init_tx_ring(sc_if) == ENOBUFS) { 2738 if_printf(ifp, "initialization failed: " 2739 "no memory for tx buffers\n"); 2740 sk_stop(sc_if); 2741 return; 2742 } 2743 2744 /* Configure interrupt handling */ 2745 CSR_READ_4(sc, SK_ISSR); 2746 if (sc_if->sk_port == SK_PORT_A) 2747 sc->sk_intrmask |= SK_INTRS1; 2748 else 2749 sc->sk_intrmask |= SK_INTRS2; 2750 2751 sc->sk_intrmask |= SK_ISR_EXTERNAL_REG; 2752 2753 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2754 2755 /* Start BMUs. */ 2756 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START); 2757 2758 if (SK_IS_GENESIS(sc)) { 2759 /* Enable XMACs TX and RX state machines */ 2760 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE); 2761 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, 2762 XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 2763 } 2764 2765 if (SK_IS_YUKON(sc)) { 2766 uint16_t reg = SK_YU_READ_2(sc_if, YUKON_GPCR); 2767 reg |= YU_GPCR_TXEN | YU_GPCR_RXEN; 2768 #if 0 2769 /* XXX disable 100Mbps and full duplex mode? */ 2770 reg &= ~(YU_GPCR_SPEED | YU_GPCR_DPLX_DIS); 2771 #endif 2772 SK_YU_WRITE_2(sc_if, YUKON_GPCR, reg); 2773 } 2774 2775 /* Activate descriptor polling timer */ 2776 SK_IF_WRITE_4(sc_if, 0, SK_DPT_TIMER_CTRL, SK_DPT_TCTL_START); 2777 /* Start transfer of Tx descriptors */ 2778 CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START); 2779 2780 ifp->if_flags |= IFF_RUNNING; 2781 ifp->if_flags &= ~IFF_OACTIVE; 2782 2783 if (SK_IS_YUKON(sc)) 2784 callout_reset(&sc_if->sk_tick_timer, hz, sk_yukon_tick, sc_if); 2785 } 2786 2787 static void 2788 sk_stop(struct sk_if_softc *sc_if) 2789 { 2790 struct sk_softc *sc = sc_if->sk_softc; 2791 struct ifnet *ifp = &sc_if->arpcom.ac_if; 2792 struct sk_chain_data *cd = &sc_if->sk_cdata; 2793 uint32_t val; 2794 int i; 2795 2796 ASSERT_SERIALIZED(ifp->if_serializer); 2797 2798 DPRINTFN(2, ("sk_stop\n")); 2799 2800 callout_stop(&sc_if->sk_tick_timer); 2801 2802 ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE); 2803 2804 /* Stop Tx descriptor polling timer */ 2805 SK_IF_WRITE_4(sc_if, 0, SK_DPT_TIMER_CTRL, SK_DPT_TCTL_STOP); 2806 2807 /* Stop transfer of Tx descriptors */ 2808 CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_STOP); 2809 for (i = 0; i < SK_TIMEOUT; i++) { 2810 val = CSR_READ_4(sc, sc_if->sk_tx_bmu); 2811 if (!(val & SK_TXBMU_TX_STOP)) 2812 break; 2813 DELAY(1); 2814 } 2815 if (i == SK_TIMEOUT) 2816 if_printf(ifp, "cannot stop transfer of Tx descriptors\n"); 2817 2818 /* Stop transfer of Rx descriptors */ 2819 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_STOP); 2820 for (i = 0; i < SK_TIMEOUT; i++) { 2821 val = SK_IF_READ_4(sc_if, 0, SK_RXQ1_BMU_CSR); 2822 if (!(val & SK_RXBMU_RX_STOP)) 2823 break; 2824 DELAY(1); 2825 } 2826 if (i == SK_TIMEOUT) 2827 if_printf(ifp, "cannot stop transfer of Rx descriptors\n"); 2828 2829 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 2830 /* Put PHY back into reset. */ 2831 val = sk_win_read_4(sc, SK_GPIO); 2832 if (sc_if->sk_port == SK_PORT_A) { 2833 val |= SK_GPIO_DIR0; 2834 val &= ~SK_GPIO_DAT0; 2835 } else { 2836 val |= SK_GPIO_DIR2; 2837 val &= ~SK_GPIO_DAT2; 2838 } 2839 sk_win_write_4(sc, SK_GPIO, val); 2840 } 2841 2842 /* Turn off various components of this interface. */ 2843 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); 2844 switch (sc->sk_type) { 2845 case SK_GENESIS: 2846 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET); 2847 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET); 2848 break; 2849 case SK_YUKON: 2850 case SK_YUKON_LITE: 2851 case SK_YUKON_LP: 2852 SK_IF_WRITE_1(sc_if,0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_SET); 2853 SK_IF_WRITE_1(sc_if,0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_SET); 2854 break; 2855 } 2856 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE); 2857 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET | SK_RBCTL_OFF); 2858 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE); 2859 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, 2860 SK_RBCTL_RESET | SK_RBCTL_OFF); 2861 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF); 2862 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP); 2863 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP); 2864 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF); 2865 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF); 2866 2867 /* Disable interrupts */ 2868 if (sc_if->sk_port == SK_PORT_A) 2869 sc->sk_intrmask &= ~SK_INTRS1; 2870 else 2871 sc->sk_intrmask &= ~SK_INTRS2; 2872 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2873 2874 SK_XM_READ_2(sc_if, XM_ISR); 2875 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF); 2876 2877 /* Free RX and TX mbufs still in the queues. */ 2878 for (i = 0; i < SK_RX_RING_CNT; i++) { 2879 if (cd->sk_rx_mbuf[i] != NULL) { 2880 if (!sc_if->sk_use_jumbo) { 2881 bus_dmamap_unload(cd->sk_rx_dtag, 2882 cd->sk_rx_dmap[i]); 2883 } 2884 m_freem(cd->sk_rx_mbuf[i]); 2885 cd->sk_rx_mbuf[i] = NULL; 2886 } 2887 } 2888 for (i = 0; i < SK_TX_RING_CNT; i++) { 2889 if (cd->sk_tx_mbuf[i] != NULL) { 2890 bus_dmamap_unload(cd->sk_tx_dtag, cd->sk_tx_dmap[i]); 2891 m_freem(cd->sk_tx_mbuf[i]); 2892 cd->sk_tx_mbuf[i] = NULL; 2893 } 2894 } 2895 } 2896 2897 #ifdef SK_DEBUG 2898 static void 2899 sk_dump_txdesc(struct sk_tx_desc *desc, int idx) 2900 { 2901 #define DESC_PRINT(X) \ 2902 if (X) \ 2903 kprintf("txdesc[%d]." #X "=%#x\n", \ 2904 idx, X); 2905 2906 DESC_PRINT(le32toh(desc->sk_ctl)); 2907 DESC_PRINT(le32toh(desc->sk_next)); 2908 DESC_PRINT(le32toh(desc->sk_data_lo)); 2909 DESC_PRINT(le32toh(desc->sk_data_hi)); 2910 DESC_PRINT(le32toh(desc->sk_xmac_txstat)); 2911 DESC_PRINT(le16toh(desc->sk_rsvd0)); 2912 DESC_PRINT(le16toh(desc->sk_csum_startval)); 2913 DESC_PRINT(le16toh(desc->sk_csum_startpos)); 2914 DESC_PRINT(le16toh(desc->sk_csum_writepos)); 2915 DESC_PRINT(le16toh(desc->sk_rsvd1)); 2916 #undef PRINT 2917 } 2918 2919 static void 2920 sk_dump_bytes(const char *data, int len) 2921 { 2922 int c, i, j; 2923 2924 for (i = 0; i < len; i += 16) { 2925 kprintf("%08x ", i); 2926 c = len - i; 2927 if (c > 16) c = 16; 2928 2929 for (j = 0; j < c; j++) { 2930 kprintf("%02x ", data[i + j] & 0xff); 2931 if ((j & 0xf) == 7 && j > 0) 2932 kprintf(" "); 2933 } 2934 2935 for (; j < 16; j++) 2936 kprintf(" "); 2937 kprintf(" "); 2938 2939 for (j = 0; j < c; j++) { 2940 int ch = data[i + j] & 0xff; 2941 kprintf("%c", ' ' <= ch && ch <= '~' ? ch : ' '); 2942 } 2943 2944 kprintf("\n"); 2945 2946 if (c < 16) 2947 break; 2948 } 2949 } 2950 2951 static void 2952 sk_dump_mbuf(struct mbuf *m) 2953 { 2954 int count = m->m_pkthdr.len; 2955 2956 kprintf("m=%p, m->m_pkthdr.len=%d\n", m, m->m_pkthdr.len); 2957 2958 while (count > 0 && m) { 2959 kprintf("m=%p, m->m_data=%p, m->m_len=%d\n", 2960 m, m->m_data, m->m_len); 2961 sk_dump_bytes(mtod(m, char *), m->m_len); 2962 2963 count -= m->m_len; 2964 m = m->m_next; 2965 } 2966 } 2967 #endif 2968 2969 /* 2970 * Allocate jumbo buffer storage. The SysKonnect adapters support 2971 * "jumbograms" (9K frames), although SysKonnect doesn't currently 2972 * use them in their drivers. In order for us to use them, we need 2973 * large 9K receive buffers, however standard mbuf clusters are only 2974 * 2048 bytes in size. Consequently, we need to allocate and manage 2975 * our own jumbo buffer pool. Fortunately, this does not require an 2976 * excessive amount of additional code. 2977 */ 2978 static int 2979 sk_jpool_alloc(device_t dev) 2980 { 2981 struct sk_if_softc *sc_if = device_get_softc(dev); 2982 struct sk_chain_data *cd = &sc_if->sk_cdata; 2983 bus_dmamem_t dmem; 2984 bus_addr_t paddr; 2985 caddr_t buf; 2986 int error, i; 2987 2988 lwkt_serialize_init(&cd->sk_jpool_serializer); 2989 2990 error = bus_dmamem_coherent(cd->sk_buf_dtag, PAGE_SIZE /* XXX */, 0, 2991 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 2992 SK_JMEM, BUS_DMA_WAITOK, &dmem); 2993 if (error) { 2994 device_printf(dev, "can't allocate jumbo frame pool\n"); 2995 return error; 2996 } 2997 cd->sk_jpool_dtag = dmem.dmem_tag; 2998 cd->sk_jpool_dmap = dmem.dmem_map; 2999 cd->sk_jpool = dmem.dmem_addr; 3000 paddr = dmem.dmem_busaddr; 3001 3002 SLIST_INIT(&cd->sk_jpool_free_ent); 3003 buf = cd->sk_jpool; 3004 3005 /* 3006 * Now divide it up into SK_JLEN pieces. 3007 */ 3008 for (i = 0; i < SK_JSLOTS; i++) { 3009 struct sk_jpool_entry *entry = &cd->sk_jpool_ent[i]; 3010 3011 entry->sc_if = sc_if; 3012 entry->inuse = 0; 3013 entry->slot = i; 3014 entry->buf = buf; 3015 entry->paddr = paddr; 3016 3017 SLIST_INSERT_HEAD(&cd->sk_jpool_free_ent, entry, entry_next); 3018 3019 buf += SK_JLEN; 3020 paddr += SK_JLEN; 3021 } 3022 return 0; 3023 } 3024 3025 static void 3026 sk_jpool_free(struct sk_if_softc *sc_if) 3027 { 3028 struct sk_chain_data *cd = &sc_if->sk_cdata; 3029 3030 if (cd->sk_jpool_dtag != NULL) { 3031 bus_dmamap_unload(cd->sk_jpool_dtag, cd->sk_jpool_dmap); 3032 bus_dmamem_free(cd->sk_jpool_dtag, cd->sk_jpool, 3033 cd->sk_jpool_dmap); 3034 bus_dma_tag_destroy(cd->sk_jpool_dtag); 3035 cd->sk_jpool_dtag = NULL; 3036 } 3037 } 3038 3039 static int 3040 sk_dma_alloc(device_t dev) 3041 { 3042 struct sk_if_softc *sc_if = device_get_softc(dev); 3043 struct sk_chain_data *cd = &sc_if->sk_cdata; 3044 struct sk_ring_data *rd = &sc_if->sk_rdata; 3045 bus_dmamem_t dmem; 3046 int i, j, error; 3047 3048 /* Create parent DMA tag */ 3049 error = bus_dma_tag_create(NULL, 1, 0, 3050 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3051 NULL, NULL, 3052 BUS_SPACE_MAXSIZE_32BIT, 0, 3053 BUS_SPACE_MAXSIZE_32BIT, 3054 0, &sc_if->sk_parent_dtag); 3055 if (error) { 3056 device_printf(dev, "can't create parent DMA tag\n"); 3057 return error; 3058 } 3059 3060 /* Create top level ring DMA tag */ 3061 error = bus_dma_tag_create(sc_if->sk_parent_dtag, 3062 1, SK_RING_BOUNDARY, 3063 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3064 NULL, NULL, 3065 BUS_SPACE_MAXSIZE_32BIT, 0, 3066 BUS_SPACE_MAXSIZE_32BIT, 3067 0, &rd->sk_ring_dtag); 3068 if (error) { 3069 device_printf(dev, "can't create ring DMA tag\n"); 3070 return error; 3071 } 3072 3073 /* Create top level buffer DMA tag */ 3074 error = bus_dma_tag_create(sc_if->sk_parent_dtag, 1, 0, 3075 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3076 NULL, NULL, 3077 BUS_SPACE_MAXSIZE_32BIT, 0, 3078 BUS_SPACE_MAXSIZE_32BIT, 3079 0, &cd->sk_buf_dtag); 3080 if (error) { 3081 device_printf(dev, "can't create buf DMA tag\n"); 3082 return error; 3083 } 3084 3085 /* Allocate the TX descriptor queue. */ 3086 error = bus_dmamem_coherent(rd->sk_ring_dtag, SK_RING_ALIGN, 0, 3087 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3088 SK_TX_RING_SIZE, 3089 BUS_DMA_WAITOK | BUS_DMA_ZERO, &dmem); 3090 if (error) { 3091 device_printf(dev, "can't allocate TX ring\n"); 3092 return error; 3093 } 3094 rd->sk_tx_ring_dtag = dmem.dmem_tag; 3095 rd->sk_tx_ring_dmap = dmem.dmem_map; 3096 rd->sk_tx_ring = dmem.dmem_addr; 3097 rd->sk_tx_ring_paddr = dmem.dmem_busaddr; 3098 3099 /* Allocate the RX descriptor queue. */ 3100 error = bus_dmamem_coherent(rd->sk_ring_dtag, SK_RING_ALIGN, 0, 3101 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3102 SK_RX_RING_SIZE, 3103 BUS_DMA_WAITOK | BUS_DMA_ZERO, &dmem); 3104 if (error) { 3105 device_printf(dev, "can't allocate TX ring\n"); 3106 return error; 3107 } 3108 rd->sk_rx_ring_dtag = dmem.dmem_tag; 3109 rd->sk_rx_ring_dmap = dmem.dmem_map; 3110 rd->sk_rx_ring = dmem.dmem_addr; 3111 rd->sk_rx_ring_paddr = dmem.dmem_busaddr; 3112 3113 /* Try to allocate memory for jumbo buffers. */ 3114 error = sk_jpool_alloc(dev); 3115 if (error) { 3116 device_printf(dev, "jumbo buffer allocation failed\n"); 3117 return error; 3118 } 3119 3120 /* Create DMA tag for TX. */ 3121 error = bus_dma_tag_create(cd->sk_buf_dtag, 1, 0, 3122 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3123 NULL, NULL, 3124 SK_JLEN, SK_NTXSEG, SK_JLEN, 3125 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK | 3126 BUS_DMA_ONEBPAGE, 3127 &cd->sk_tx_dtag); 3128 if (error) { 3129 device_printf(dev, "can't create TX DMA tag\n"); 3130 return error; 3131 } 3132 3133 /* Create DMA maps for TX. */ 3134 for (i = 0; i < SK_TX_RING_CNT; i++) { 3135 error = bus_dmamap_create(cd->sk_tx_dtag, 3136 BUS_DMA_WAITOK | BUS_DMA_ONEBPAGE, 3137 &cd->sk_tx_dmap[i]); 3138 if (error) { 3139 device_printf(dev, "can't create %dth TX DMA map\n", i); 3140 3141 for (j = 0; j < i; ++j) { 3142 bus_dmamap_destroy(cd->sk_tx_dtag, 3143 cd->sk_tx_dmap[i]); 3144 } 3145 bus_dma_tag_destroy(cd->sk_tx_dtag); 3146 cd->sk_tx_dtag = NULL; 3147 return error; 3148 } 3149 } 3150 3151 /* Create DMA tag for RX. */ 3152 error = bus_dma_tag_create(cd->sk_buf_dtag, 1, 0, 3153 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 3154 NULL, NULL, 3155 MCLBYTES, 1, MCLBYTES, 3156 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK, 3157 &cd->sk_rx_dtag); 3158 if (error) { 3159 device_printf(dev, "can't create RX DMA tag\n"); 3160 return error; 3161 } 3162 3163 /* Create a spare RX DMA map. */ 3164 error = bus_dmamap_create(cd->sk_rx_dtag, BUS_DMA_WAITOK, 3165 &cd->sk_rx_dmap_tmp); 3166 if (error) { 3167 device_printf(dev, "can't create spare RX DMA map\n"); 3168 bus_dma_tag_destroy(cd->sk_rx_dtag); 3169 cd->sk_rx_dtag = NULL; 3170 return error; 3171 } 3172 3173 /* Create DMA maps for RX. */ 3174 for (i = 0; i < SK_RX_RING_CNT; ++i) { 3175 error = bus_dmamap_create(cd->sk_rx_dtag, BUS_DMA_WAITOK, 3176 &cd->sk_rx_dmap[i]); 3177 if (error) { 3178 device_printf(dev, "can't create %dth RX DMA map\n", i); 3179 3180 for (j = 0; j < i; ++j) { 3181 bus_dmamap_destroy(cd->sk_rx_dtag, 3182 cd->sk_rx_dmap[i]); 3183 } 3184 bus_dmamap_destroy(cd->sk_rx_dtag, cd->sk_rx_dmap_tmp); 3185 bus_dma_tag_destroy(cd->sk_rx_dtag); 3186 cd->sk_rx_dtag = NULL; 3187 return error; 3188 } 3189 } 3190 return 0; 3191 } 3192 3193 static void 3194 sk_dma_free(device_t dev) 3195 { 3196 struct sk_if_softc *sc_if = device_get_softc(dev); 3197 struct sk_chain_data *cd = &sc_if->sk_cdata; 3198 struct sk_ring_data *rd = &sc_if->sk_rdata; 3199 int i; 3200 3201 if (cd->sk_tx_dtag != NULL) { 3202 for (i = 0; i < SK_TX_RING_CNT; ++i) { 3203 KASSERT(cd->sk_tx_mbuf[i] == NULL, 3204 ("sk_stop() is not called before %s()", 3205 __func__)); 3206 bus_dmamap_destroy(cd->sk_tx_dtag, cd->sk_tx_dmap[i]); 3207 } 3208 bus_dma_tag_destroy(cd->sk_tx_dtag); 3209 } 3210 3211 if (cd->sk_rx_dtag != NULL) { 3212 for (i = 0; i < SK_RX_RING_CNT; ++i) { 3213 KASSERT(cd->sk_rx_mbuf[i] == NULL, 3214 ("sk_stop() is not called before %s()", 3215 __func__)); 3216 bus_dmamap_destroy(cd->sk_rx_dtag, cd->sk_rx_dmap[i]); 3217 } 3218 bus_dmamap_destroy(cd->sk_rx_dtag, cd->sk_rx_dmap_tmp); 3219 bus_dma_tag_destroy(cd->sk_rx_dtag); 3220 } 3221 3222 sk_jpool_free(sc_if); 3223 3224 if (rd->sk_rx_ring_dtag != NULL) { 3225 bus_dmamap_unload(rd->sk_rx_ring_dtag, rd->sk_rx_ring_dmap); 3226 bus_dmamem_free(rd->sk_rx_ring_dtag, rd->sk_rx_ring, 3227 rd->sk_rx_ring_dmap); 3228 bus_dma_tag_destroy(rd->sk_rx_ring_dtag); 3229 } 3230 3231 if (rd->sk_tx_ring_dtag != NULL) { 3232 bus_dmamap_unload(rd->sk_tx_ring_dtag, rd->sk_tx_ring_dmap); 3233 bus_dmamem_free(rd->sk_tx_ring_dtag, rd->sk_tx_ring, 3234 rd->sk_tx_ring_dmap); 3235 bus_dma_tag_destroy(rd->sk_tx_ring_dtag); 3236 } 3237 3238 if (rd->sk_ring_dtag != NULL) 3239 bus_dma_tag_destroy(rd->sk_ring_dtag); 3240 if (cd->sk_buf_dtag != NULL) 3241 bus_dma_tag_destroy(cd->sk_buf_dtag); 3242 if (sc_if->sk_parent_dtag != NULL) 3243 bus_dma_tag_destroy(sc_if->sk_parent_dtag); 3244 } 3245 3246 static int 3247 skc_sysctl_imtime(SYSCTL_HANDLER_ARGS) 3248 { 3249 struct sk_softc *sc = arg1; 3250 struct lwkt_serialize *slize = &sc->sk_serializer; 3251 int error = 0, v; 3252 3253 lwkt_serialize_enter(slize); 3254 3255 v = sc->sk_imtime; 3256 error = sysctl_handle_int(oidp, &v, 0, req); 3257 if (error || req->newptr == NULL) 3258 goto back; 3259 if (v <= 0) { 3260 error = EINVAL; 3261 goto back; 3262 } 3263 3264 if (sc->sk_imtime != v) { 3265 sc->sk_imtime = v; 3266 sk_win_write_4(sc, SK_IMTIMERINIT, 3267 SK_IM_USECS(sc, sc->sk_imtime)); 3268 3269 /* 3270 * Force interrupt moderation timer to 3271 * reload new value. 3272 */ 3273 sk_win_write_4(sc, SK_IMTIMER, 0); 3274 } 3275 back: 3276 lwkt_serialize_exit(slize); 3277 return error; 3278 } 3279