1 /*- 2 * Copyright (c) 1997 Semen Ustimenko (semenu@FreeBSD.org) 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: src/sys/dev/tx/if_tx.c,v 1.61.2.1 2002/10/29 01:43:49 semenu Exp $ 27 * $DragonFly: src/sys/dev/netif/tx/if_tx.c,v 1.34 2005/12/31 14:08:00 sephe Exp $ 28 */ 29 30 /* 31 * EtherPower II 10/100 Fast Ethernet (SMC 9432 serie) 32 * 33 * These cards are based on SMC83c17x (EPIC) chip and one of the various 34 * PHYs (QS6612, AC101 and LXT970 were seen). The media support depends on 35 * card model. All cards support 10baseT/UTP and 100baseTX half- and full- 36 * duplex (SMB9432TX). SMC9432BTX also supports 10baseT/BNC. SMC9432FTX also 37 * supports fibre optics. 38 * 39 * Thanks are going to Steve Bauer and Jason Wright. 40 */ 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/sockio.h> 45 #include <sys/mbuf.h> 46 #include <sys/malloc.h> 47 #include <sys/kernel.h> 48 #include <sys/socket.h> 49 #include <sys/queue.h> 50 #include <sys/serialize.h> 51 #include <sys/thread2.h> 52 53 #include <net/if.h> 54 #include <net/ifq_var.h> 55 #include <net/if_arp.h> 56 #include <net/ethernet.h> 57 #include <net/if_dl.h> 58 #include <net/if_media.h> 59 60 #include <net/bpf.h> 61 62 #include <net/vlan/if_vlan_var.h> 63 64 #include <vm/vm.h> /* for vtophys */ 65 #include <vm/pmap.h> /* for vtophys */ 66 #include <machine/bus_memio.h> 67 #include <machine/bus_pio.h> 68 #include <machine/bus.h> 69 #include <machine/resource.h> 70 #include <sys/bus.h> 71 #include <sys/rman.h> 72 73 #include <bus/pci/pcireg.h> 74 #include <bus/pci/pcivar.h> 75 #include <bus/pci/pcidevs.h> 76 77 #include <dev/netif/mii_layer/mii.h> 78 #include <dev/netif/mii_layer/miivar.h> 79 #include <dev/netif/mii_layer/miidevs.h> 80 #include <dev/netif/mii_layer/lxtphyreg.h> 81 82 #include "miibus_if.h" 83 84 #include <dev/netif/tx/if_txreg.h> 85 #include <dev/netif/tx/if_txvar.h> 86 87 static int epic_ifioctl(struct ifnet *, u_long, caddr_t, struct ucred *); 88 static void epic_intr(void *); 89 static void epic_tx_underrun(epic_softc_t *); 90 static int epic_common_attach(epic_softc_t *); 91 static void epic_ifstart(struct ifnet *); 92 static void epic_ifwatchdog(struct ifnet *); 93 static void epic_stats_update(void *); 94 static int epic_init(epic_softc_t *); 95 static void epic_stop(epic_softc_t *); 96 static void epic_rx_done(epic_softc_t *); 97 static void epic_tx_done(epic_softc_t *); 98 static int epic_init_rings(epic_softc_t *); 99 static void epic_free_rings(epic_softc_t *); 100 static void epic_stop_activity(epic_softc_t *); 101 static int epic_queue_last_packet(epic_softc_t *); 102 static void epic_start_activity(epic_softc_t *); 103 static void epic_set_rx_mode(epic_softc_t *); 104 static void epic_set_tx_mode(epic_softc_t *); 105 static void epic_set_mc_table(epic_softc_t *); 106 static int epic_read_eeprom(epic_softc_t *,u_int16_t); 107 static void epic_output_eepromw(epic_softc_t *, u_int16_t); 108 static u_int16_t epic_input_eepromw(epic_softc_t *); 109 static u_int8_t epic_eeprom_clock(epic_softc_t *,u_int8_t); 110 static void epic_write_eepromreg(epic_softc_t *,u_int8_t); 111 static u_int8_t epic_read_eepromreg(epic_softc_t *); 112 113 static int epic_read_phy_reg(epic_softc_t *, int, int); 114 static void epic_write_phy_reg(epic_softc_t *, int, int, int); 115 116 static int epic_miibus_readreg(device_t, int, int); 117 static int epic_miibus_writereg(device_t, int, int, int); 118 static void epic_miibus_statchg(device_t); 119 static void epic_miibus_mediainit(device_t); 120 121 static int epic_ifmedia_upd(struct ifnet *); 122 static void epic_ifmedia_sts(struct ifnet *, struct ifmediareq *); 123 124 static int epic_probe(device_t); 125 static int epic_attach(device_t); 126 static void epic_shutdown(device_t); 127 static int epic_detach(device_t); 128 129 static device_method_t epic_methods[] = { 130 /* Device interface */ 131 DEVMETHOD(device_probe, epic_probe), 132 DEVMETHOD(device_attach, epic_attach), 133 DEVMETHOD(device_detach, epic_detach), 134 DEVMETHOD(device_shutdown, epic_shutdown), 135 136 /* MII interface */ 137 DEVMETHOD(miibus_readreg, epic_miibus_readreg), 138 DEVMETHOD(miibus_writereg, epic_miibus_writereg), 139 DEVMETHOD(miibus_statchg, epic_miibus_statchg), 140 DEVMETHOD(miibus_mediainit, epic_miibus_mediainit), 141 142 { 0, 0 } 143 }; 144 145 static driver_t epic_driver = { 146 "tx", 147 epic_methods, 148 sizeof(epic_softc_t) 149 }; 150 151 static devclass_t epic_devclass; 152 153 DECLARE_DUMMY_MODULE(if_tx); 154 MODULE_DEPEND(if_tx, miibus, 1, 1, 1); 155 DRIVER_MODULE(if_tx, pci, epic_driver, epic_devclass, 0, 0); 156 DRIVER_MODULE(miibus, tx, miibus_driver, miibus_devclass, 0, 0); 157 158 static struct epic_type epic_devs[] = { 159 { PCI_VENDOR_SMC, PCI_PRODUCT_SMC_83C170, 160 "SMC EtherPower II 10/100" }, 161 { 0, 0, NULL } 162 }; 163 164 static int 165 epic_probe(device_t dev) 166 { 167 struct epic_type *t; 168 uint16_t vid, did; 169 170 vid = pci_get_vendor(dev); 171 did = pci_get_device(dev); 172 for (t = epic_devs; t->name != NULL; ++t) { 173 if (vid == t->ven_id && did == t->dev_id) { 174 device_set_desc(dev, t->name); 175 return 0; 176 } 177 } 178 return ENXIO; 179 } 180 181 #if defined(EPIC_USEIOSPACE) 182 #define EPIC_RES SYS_RES_IOPORT 183 #define EPIC_RID PCIR_BAR(0) 184 #else 185 #define EPIC_RES SYS_RES_MEMORY 186 #define EPIC_RID PCIR_BAR(1) 187 #endif 188 189 /* 190 * Attach routine: map registers, allocate softc, rings and descriptors. 191 * Reset to known state. 192 */ 193 static int 194 epic_attach(device_t dev) 195 { 196 struct ifnet *ifp; 197 epic_softc_t *sc; 198 int error; 199 int i, rid, tmp; 200 201 sc = device_get_softc(dev); 202 203 /* Preinitialize softc structure */ 204 sc->dev = dev; 205 callout_init(&sc->tx_stat_timer); 206 207 /* Fill ifnet structure */ 208 ifp = &sc->sc_if; 209 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 210 ifp->if_softc = sc; 211 ifp->if_flags = IFF_BROADCAST|IFF_SIMPLEX|IFF_MULTICAST; 212 ifp->if_ioctl = epic_ifioctl; 213 ifp->if_start = epic_ifstart; 214 ifp->if_watchdog = epic_ifwatchdog; 215 ifp->if_init = (if_init_f_t*)epic_init; 216 ifp->if_timer = 0; 217 ifp->if_baudrate = 10000000; 218 ifq_set_maxlen(&ifp->if_snd, TX_RING_SIZE - 1); 219 ifq_set_ready(&ifp->if_snd); 220 221 pci_enable_busmaster(dev); 222 223 rid = EPIC_RID; 224 sc->res = bus_alloc_resource_any(dev, EPIC_RES, &rid, RF_ACTIVE); 225 226 if (sc->res == NULL) { 227 device_printf(dev, "couldn't map ports/memory\n"); 228 error = ENXIO; 229 goto fail; 230 } 231 232 sc->sc_st = rman_get_bustag(sc->res); 233 sc->sc_sh = rman_get_bushandle(sc->res); 234 235 /* Allocate interrupt */ 236 rid = 0; 237 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 238 RF_SHAREABLE | RF_ACTIVE); 239 240 if (sc->irq == NULL) { 241 device_printf(dev, "couldn't map interrupt\n"); 242 error = ENXIO; 243 goto fail; 244 } 245 246 /* Do OS independent part, including chip wakeup and reset */ 247 error = epic_common_attach(sc); 248 if (error) { 249 error = ENXIO; 250 goto fail; 251 } 252 253 /* Do ifmedia setup */ 254 if (mii_phy_probe(dev, &sc->miibus, 255 epic_ifmedia_upd, epic_ifmedia_sts)) { 256 device_printf(dev, "ERROR! MII without any PHY!?\n"); 257 error = ENXIO; 258 goto fail; 259 } 260 261 /* board type and ... */ 262 printf(" type "); 263 for(i=0x2c;i<0x32;i++) { 264 tmp = epic_read_eeprom(sc, i); 265 if (' ' == (u_int8_t)tmp) break; 266 printf("%c", (u_int8_t)tmp); 267 tmp >>= 8; 268 if (' ' == (u_int8_t)tmp) break; 269 printf("%c", (u_int8_t)tmp); 270 } 271 printf("\n"); 272 273 /* Attach to OS's managers */ 274 ether_ifattach(ifp, sc->sc_macaddr, NULL); 275 ifp->if_hdrlen = sizeof(struct ether_vlan_header); 276 277 error = bus_setup_intr(dev, sc->irq, INTR_NETSAFE, 278 epic_intr, sc, &sc->sc_ih, 279 ifp->if_serializer); 280 281 if (error) { 282 device_printf(dev, "couldn't set up irq\n"); 283 ether_ifdetach(ifp); 284 goto fail; 285 } 286 287 return(0); 288 289 fail: 290 epic_detach(dev); 291 return(error); 292 } 293 294 /* 295 * Detach driver and free resources 296 */ 297 static int 298 epic_detach(device_t dev) 299 { 300 epic_softc_t *sc = device_get_softc(dev); 301 struct ifnet *ifp = &sc->arpcom.ac_if; 302 303 if (device_is_attached(dev)) { 304 lwkt_serialize_enter(ifp->if_serializer); 305 epic_stop(sc); 306 bus_teardown_intr(dev, sc->irq, sc->sc_ih); 307 lwkt_serialize_exit(ifp->if_serializer); 308 309 ether_ifdetach(ifp); 310 } 311 312 if (sc->miibus) 313 device_delete_child(dev, sc->miibus); 314 bus_generic_detach(dev); 315 316 if (sc->irq) 317 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq); 318 if (sc->res) 319 bus_release_resource(dev, EPIC_RES, EPIC_RID, sc->res); 320 321 if (sc->tx_flist) 322 free(sc->tx_flist, M_DEVBUF); 323 if (sc->tx_desc) 324 free(sc->tx_desc, M_DEVBUF); 325 if (sc->rx_desc) 326 free(sc->rx_desc, M_DEVBUF); 327 328 return(0); 329 } 330 331 #undef EPIC_RES 332 #undef EPIC_RID 333 334 /* 335 * Stop all chip I/O so that the kernel's probe routines don't 336 * get confused by errant DMAs when rebooting. 337 */ 338 static void 339 epic_shutdown(device_t dev) 340 { 341 epic_softc_t *sc; 342 struct ifnet *ifp; 343 344 sc = device_get_softc(dev); 345 ifp = &sc->arpcom.ac_if; 346 lwkt_serialize_enter(ifp->if_serializer); 347 epic_stop(sc); 348 lwkt_serialize_exit(ifp->if_serializer); 349 } 350 351 /* 352 * This is if_ioctl handler. 353 */ 354 static int 355 epic_ifioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr) 356 { 357 epic_softc_t *sc = ifp->if_softc; 358 struct mii_data *mii; 359 struct ifreq *ifr = (struct ifreq *) data; 360 int error = 0; 361 362 switch (command) { 363 case SIOCSIFMTU: 364 if (ifp->if_mtu == ifr->ifr_mtu) 365 break; 366 367 /* XXX Though the datasheet doesn't imply any 368 * limitations on RX and TX sizes beside max 64Kb 369 * DMA transfer, seems we can't send more then 1600 370 * data bytes per ethernet packet. (Transmitter hangs 371 * up if more data is sent) 372 */ 373 if (ifr->ifr_mtu + ifp->if_hdrlen <= EPIC_MAX_MTU) { 374 ifp->if_mtu = ifr->ifr_mtu; 375 epic_stop(sc); 376 epic_init(sc); 377 } else 378 error = EINVAL; 379 break; 380 381 case SIOCSIFFLAGS: 382 /* 383 * If the interface is marked up and stopped, then start it. 384 * If it is marked down and running, then stop it. 385 */ 386 if (ifp->if_flags & IFF_UP) { 387 if ((ifp->if_flags & IFF_RUNNING) == 0) { 388 epic_init(sc); 389 break; 390 } 391 } else { 392 if (ifp->if_flags & IFF_RUNNING) { 393 epic_stop(sc); 394 break; 395 } 396 } 397 398 /* Handle IFF_PROMISC and IFF_ALLMULTI flags */ 399 epic_stop_activity(sc); 400 epic_set_mc_table(sc); 401 epic_set_rx_mode(sc); 402 epic_start_activity(sc); 403 break; 404 405 case SIOCADDMULTI: 406 case SIOCDELMULTI: 407 epic_set_mc_table(sc); 408 error = 0; 409 break; 410 411 case SIOCSIFMEDIA: 412 case SIOCGIFMEDIA: 413 mii = device_get_softc(sc->miibus); 414 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 415 break; 416 417 default: 418 error = ether_ioctl(ifp, command, data); 419 break; 420 } 421 return error; 422 } 423 424 /* 425 * OS-independed part of attach process. allocate memory for descriptors 426 * and frag lists, wake up chip, read MAC address and PHY identyfier. 427 * Return -1 on failure. 428 */ 429 static int 430 epic_common_attach(epic_softc_t *sc) 431 { 432 uint16_t sub_vid; 433 int i; 434 435 sc->tx_flist = malloc(sizeof(struct epic_frag_list)*TX_RING_SIZE, 436 M_DEVBUF, M_WAITOK | M_ZERO); 437 sc->tx_desc = malloc(sizeof(struct epic_tx_desc)*TX_RING_SIZE, 438 M_DEVBUF, M_WAITOK | M_ZERO); 439 sc->rx_desc = malloc(sizeof(struct epic_rx_desc)*RX_RING_SIZE, 440 M_DEVBUF, M_WAITOK | M_ZERO); 441 442 /* Bring the chip out of low-power mode. */ 443 CSR_WRITE_4(sc, GENCTL, GENCTL_SOFT_RESET); 444 DELAY(500); 445 446 /* Workaround for Application Note 7-15 */ 447 for (i=0; i<16; i++) CSR_WRITE_4(sc, TEST1, TEST1_CLOCK_TEST); 448 449 /* Read mac address from EEPROM */ 450 for (i = 0; i < ETHER_ADDR_LEN / sizeof(u_int16_t); i++) 451 ((u_int16_t *)sc->sc_macaddr)[i] = epic_read_eeprom(sc,i); 452 453 /* Set Non-Volatile Control Register from EEPROM */ 454 CSR_WRITE_4(sc, NVCTL, epic_read_eeprom(sc, EEPROM_NVCTL) & 0x1F); 455 456 /* Set defaults */ 457 sc->tx_threshold = TRANSMIT_THRESHOLD; 458 sc->txcon = TXCON_DEFAULT; 459 sc->miicfg = MIICFG_SMI_ENABLE; 460 sc->phyid = EPIC_UNKN_PHY; 461 sc->serinst = -1; 462 463 /* Fetch card id */ 464 sub_vid = pci_get_subvendor(sc->dev); 465 sc->cardid = pci_get_subdevice(sc->dev); 466 467 if (sub_vid != PCI_VENDOR_SMC) 468 device_printf(sc->dev, "unknown card vendor %04xh\n", sub_vid); 469 470 return 0; 471 } 472 473 /* 474 * This is if_start handler. It takes mbufs from if_snd queue 475 * and queue them for transmit, one by one, until TX ring become full 476 * or queue become empty. 477 */ 478 static void 479 epic_ifstart(struct ifnet *ifp) 480 { 481 epic_softc_t *sc = ifp->if_softc; 482 struct epic_tx_buffer *buf; 483 struct epic_tx_desc *desc; 484 struct epic_frag_list *flist; 485 struct mbuf *m0; 486 struct mbuf *m; 487 int i; 488 489 while (sc->pending_txs < TX_RING_SIZE) { 490 buf = sc->tx_buffer + sc->cur_tx; 491 desc = sc->tx_desc + sc->cur_tx; 492 flist = sc->tx_flist + sc->cur_tx; 493 494 /* Get next packet to send */ 495 m0 = ifq_dequeue(&ifp->if_snd, NULL); 496 497 /* If nothing to send, return */ 498 if (m0 == NULL) 499 return; 500 501 /* Fill fragments list */ 502 for (m = m0, i = 0; 503 (NULL != m) && (i < EPIC_MAX_FRAGS); 504 m = m->m_next, i++) { 505 flist->frag[i].fraglen = m->m_len; 506 flist->frag[i].fragaddr = vtophys(mtod(m, caddr_t)); 507 } 508 flist->numfrags = i; 509 510 /* If packet was more than EPIC_MAX_FRAGS parts, */ 511 /* recopy packet to new allocated mbuf cluster */ 512 if (NULL != m) { 513 m = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR); 514 if (NULL == m) { 515 m_freem(m0); 516 ifp->if_oerrors++; 517 continue; 518 } 519 520 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t)); 521 flist->frag[0].fraglen = 522 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 523 m->m_pkthdr.rcvif = ifp; 524 525 flist->numfrags = 1; 526 flist->frag[0].fragaddr = vtophys(mtod(m, caddr_t)); 527 m_freem(m0); 528 m0 = m; 529 } 530 531 buf->mbuf = m0; 532 sc->pending_txs++; 533 sc->cur_tx = (sc->cur_tx + 1) & TX_RING_MASK; 534 desc->control = 0x01; 535 desc->txlength = 536 max(m0->m_pkthdr.len,ETHER_MIN_LEN-ETHER_CRC_LEN); 537 desc->status = 0x8000; 538 CSR_WRITE_4(sc, COMMAND, COMMAND_TXQUEUED); 539 540 /* Set watchdog timer */ 541 ifp->if_timer = 8; 542 543 BPF_MTAP(ifp, m0); 544 } 545 546 ifp->if_flags |= IFF_OACTIVE; 547 548 return; 549 550 } 551 552 /* 553 * Synopsis: Finish all received frames. 554 */ 555 static void 556 epic_rx_done(epic_softc_t *sc) 557 { 558 u_int16_t len; 559 struct ifnet *ifp = &sc->sc_if; 560 struct epic_rx_buffer *buf; 561 struct epic_rx_desc *desc; 562 struct mbuf *m; 563 564 while ((sc->rx_desc[sc->cur_rx].status & 0x8000) == 0) { 565 buf = sc->rx_buffer + sc->cur_rx; 566 desc = sc->rx_desc + sc->cur_rx; 567 568 /* Switch to next descriptor */ 569 sc->cur_rx = (sc->cur_rx+1) & RX_RING_MASK; 570 571 /* 572 * Check for RX errors. This should only happen if 573 * SAVE_ERRORED_PACKETS is set. RX errors generate 574 * RXE interrupt usually. 575 */ 576 if ((desc->status & 1) == 0) { 577 sc->sc_if.if_ierrors++; 578 desc->status = 0x8000; 579 continue; 580 } 581 582 /* Save packet length and mbuf contained packet */ 583 len = desc->rxlength - ETHER_CRC_LEN; 584 m = buf->mbuf; 585 586 /* Try to get mbuf cluster */ 587 buf->mbuf = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR); 588 if (NULL == buf->mbuf) { 589 buf->mbuf = m; 590 desc->status = 0x8000; 591 ifp->if_ierrors++; 592 continue; 593 } 594 595 /* Point to new mbuf, and give descriptor to chip */ 596 desc->bufaddr = vtophys(mtod(buf->mbuf, caddr_t)); 597 desc->status = 0x8000; 598 599 /* First mbuf in packet holds the ethernet and packet headers */ 600 m->m_pkthdr.rcvif = ifp; 601 m->m_pkthdr.len = m->m_len = len; 602 603 /* Give mbuf to OS */ 604 ifp->if_input(ifp, m); 605 606 /* Successfuly received frame */ 607 ifp->if_ipackets++; 608 } 609 610 return; 611 } 612 613 /* 614 * Synopsis: Do last phase of transmission. I.e. if desc is 615 * transmitted, decrease pending_txs counter, free mbuf contained 616 * packet, switch to next descriptor and repeat until no packets 617 * are pending or descriptor is not transmitted yet. 618 */ 619 static void 620 epic_tx_done(epic_softc_t *sc) 621 { 622 struct epic_tx_buffer *buf; 623 struct epic_tx_desc *desc; 624 u_int16_t status; 625 626 while (sc->pending_txs > 0) { 627 buf = sc->tx_buffer + sc->dirty_tx; 628 desc = sc->tx_desc + sc->dirty_tx; 629 status = desc->status; 630 631 /* If packet is not transmitted, thou followed */ 632 /* packets are not transmitted too */ 633 if (status & 0x8000) break; 634 635 /* Packet is transmitted. Switch to next and */ 636 /* free mbuf */ 637 sc->pending_txs--; 638 sc->dirty_tx = (sc->dirty_tx + 1) & TX_RING_MASK; 639 m_freem(buf->mbuf); 640 buf->mbuf = NULL; 641 642 /* Check for errors and collisions */ 643 if (status & 0x0001) sc->sc_if.if_opackets++; 644 else sc->sc_if.if_oerrors++; 645 sc->sc_if.if_collisions += (status >> 8) & 0x1F; 646 #if defined(EPIC_DIAG) 647 if ((status & 0x1001) == 0x1001) { 648 if_printf(&sc->sc_if, 649 "Tx ERROR: excessive coll. number\n"); 650 } 651 #endif 652 } 653 654 if (sc->pending_txs < TX_RING_SIZE) 655 sc->sc_if.if_flags &= ~IFF_OACTIVE; 656 } 657 658 /* 659 * Interrupt function 660 */ 661 static void 662 epic_intr(void *arg) 663 { 664 epic_softc_t * sc = (epic_softc_t *) arg; 665 int status, i = 4; 666 667 while (i-- && ((status = CSR_READ_4(sc, INTSTAT)) & INTSTAT_INT_ACTV)) { 668 CSR_WRITE_4(sc, INTSTAT, status); 669 670 if (status & (INTSTAT_RQE|INTSTAT_RCC|INTSTAT_OVW)) { 671 epic_rx_done(sc); 672 if (status & (INTSTAT_RQE|INTSTAT_OVW)) { 673 #if defined(EPIC_DIAG) 674 if (status & INTSTAT_OVW) 675 if_printf(&sc->sc_if, "RX buffer overflow\n"); 676 if (status & INTSTAT_RQE) 677 if_printf(&sc->sc_if, "RX FIFO overflow\n"); 678 #endif 679 if ((CSR_READ_4(sc, COMMAND) & COMMAND_RXQUEUED) == 0) 680 CSR_WRITE_4(sc, COMMAND, COMMAND_RXQUEUED); 681 sc->sc_if.if_ierrors++; 682 } 683 } 684 685 if (status & (INTSTAT_TXC|INTSTAT_TCC|INTSTAT_TQE)) { 686 epic_tx_done(sc); 687 if (!ifq_is_empty(&sc->sc_if.if_snd)) 688 epic_ifstart(&sc->sc_if); 689 } 690 691 /* Check for rare errors */ 692 if (status & (INTSTAT_FATAL|INTSTAT_PMA|INTSTAT_PTA| 693 INTSTAT_APE|INTSTAT_DPE|INTSTAT_TXU|INTSTAT_RXE)) { 694 if (status & (INTSTAT_FATAL|INTSTAT_PMA|INTSTAT_PTA| 695 INTSTAT_APE|INTSTAT_DPE)) { 696 if_printf(&sc->sc_if, "PCI fatal errors occured: %s%s%s%s\n", 697 (status&INTSTAT_PMA)?"PMA ":"", 698 (status&INTSTAT_PTA)?"PTA ":"", 699 (status&INTSTAT_APE)?"APE ":"", 700 (status&INTSTAT_DPE)?"DPE":"" 701 ); 702 703 epic_stop(sc); 704 epic_init(sc); 705 706 break; 707 } 708 709 if (status & INTSTAT_RXE) { 710 #if defined(EPIC_DIAG) 711 if_printf(sc->sc_if, "CRC/Alignment error\n"); 712 #endif 713 sc->sc_if.if_ierrors++; 714 } 715 716 if (status & INTSTAT_TXU) { 717 epic_tx_underrun(sc); 718 sc->sc_if.if_oerrors++; 719 } 720 } 721 } 722 723 /* If no packets are pending, then no timeouts */ 724 if (sc->pending_txs == 0) sc->sc_if.if_timer = 0; 725 726 return; 727 } 728 729 /* 730 * Handle the TX underrun error: increase the TX threshold 731 * and restart the transmitter. 732 */ 733 static void 734 epic_tx_underrun(epic_softc_t *sc) 735 { 736 if (sc->tx_threshold > TRANSMIT_THRESHOLD_MAX) { 737 sc->txcon &= ~TXCON_EARLY_TRANSMIT_ENABLE; 738 #if defined(EPIC_DIAG) 739 if_printf(&sc->sc_if, "Tx UNDERRUN: early TX disabled\n"); 740 #endif 741 } else { 742 sc->tx_threshold += 0x40; 743 #if defined(EPIC_DIAG) 744 if_printf(&sc->sc_if, "Tx UNDERRUN: " 745 "TX threshold increased to %d\n", sc->tx_threshold); 746 #endif 747 } 748 749 /* We must set TXUGO to reset the stuck transmitter */ 750 CSR_WRITE_4(sc, COMMAND, COMMAND_TXUGO); 751 752 /* Update the TX threshold */ 753 epic_stop_activity(sc); 754 epic_set_tx_mode(sc); 755 epic_start_activity(sc); 756 757 return; 758 } 759 760 /* 761 * Synopsis: This one is called if packets wasn't transmitted 762 * during timeout. Try to deallocate transmitted packets, and 763 * if success continue to work. 764 */ 765 static void 766 epic_ifwatchdog(struct ifnet *ifp) 767 { 768 epic_softc_t *sc = ifp->if_softc; 769 770 if_printf(ifp, "device timeout %d packets\n", sc->pending_txs); 771 772 /* Try to finish queued packets */ 773 epic_tx_done(sc); 774 775 /* If not successful */ 776 if (sc->pending_txs > 0) { 777 778 ifp->if_oerrors+=sc->pending_txs; 779 780 /* Reinitialize board */ 781 if_printf(ifp, "reinitialization\n"); 782 epic_stop(sc); 783 epic_init(sc); 784 785 } else 786 if_printf(ifp, "seems we can continue normaly\n"); 787 788 /* Start output */ 789 if (!ifq_is_empty(&ifp->if_snd)) 790 epic_ifstart(ifp); 791 } 792 793 /* 794 * Despite the name of this function, it doesn't update statistics, it only 795 * helps in autonegotiation process. 796 */ 797 static void 798 epic_stats_update(void *xsc) 799 { 800 epic_softc_t *sc = xsc; 801 struct ifnet *ifp = &sc->sc_if; 802 struct mii_data * mii; 803 804 lwkt_serialize_enter(ifp->if_serializer); 805 806 mii = device_get_softc(sc->miibus); 807 mii_tick(mii); 808 809 callout_reset(&sc->tx_stat_timer, hz, epic_stats_update, sc); 810 811 lwkt_serialize_exit(ifp->if_serializer); 812 } 813 814 /* 815 * Set media options. 816 */ 817 static int 818 epic_ifmedia_upd(struct ifnet *ifp) 819 { 820 epic_softc_t *sc; 821 struct mii_data *mii; 822 struct ifmedia *ifm; 823 struct mii_softc *miisc; 824 int cfg, media; 825 826 sc = ifp->if_softc; 827 mii = device_get_softc(sc->miibus); 828 ifm = &mii->mii_media; 829 media = ifm->ifm_cur->ifm_media; 830 831 /* Do not do anything if interface is not up */ 832 if ((ifp->if_flags & IFF_UP) == 0) 833 return (0); 834 835 /* 836 * Lookup current selected PHY 837 */ 838 if (IFM_INST(media) == sc->serinst) { 839 sc->phyid = EPIC_SERIAL; 840 sc->physc = NULL; 841 } else { 842 /* If we're not selecting serial interface, select MII mode */ 843 sc->miicfg &= ~MIICFG_SERIAL_ENABLE; 844 CSR_WRITE_4(sc, MIICFG, sc->miicfg); 845 846 /* Default to unknown PHY */ 847 sc->phyid = EPIC_UNKN_PHY; 848 849 /* Lookup selected PHY */ 850 for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL; 851 miisc = LIST_NEXT(miisc, mii_list)) { 852 if (IFM_INST(media) == miisc->mii_inst) { 853 sc->physc = miisc; 854 break; 855 } 856 } 857 858 /* Identify selected PHY */ 859 if (sc->physc) { 860 int id1, id2, model, oui; 861 862 id1 = PHY_READ(sc->physc, MII_PHYIDR1); 863 id2 = PHY_READ(sc->physc, MII_PHYIDR2); 864 865 oui = MII_OUI(id1, id2); 866 model = MII_MODEL(id2); 867 switch (oui) { 868 case MII_OUI_QUALSEMI: 869 if (model == MII_MODEL_QUALSEMI_QS6612) 870 sc->phyid = EPIC_QS6612_PHY; 871 break; 872 case MII_OUI_xxALTIMA: 873 if (model == MII_MODEL_xxALTIMA_AC101) 874 sc->phyid = EPIC_AC101_PHY; 875 break; 876 case MII_OUI_xxLEVEL1: 877 if (model == MII_MODEL_xxLEVEL1_LXT970) 878 sc->phyid = EPIC_LXT970_PHY; 879 break; 880 } 881 } 882 } 883 884 /* 885 * Do PHY specific card setup 886 */ 887 888 /* Call this, to isolate all not selected PHYs and 889 * set up selected 890 */ 891 mii_mediachg(mii); 892 893 /* Do our own setup */ 894 switch (sc->phyid) { 895 case EPIC_QS6612_PHY: 896 break; 897 case EPIC_AC101_PHY: 898 /* We have to powerup fiber tranceivers */ 899 if (IFM_SUBTYPE(media) == IFM_100_FX) 900 sc->miicfg |= MIICFG_694_ENABLE; 901 else 902 sc->miicfg &= ~MIICFG_694_ENABLE; 903 CSR_WRITE_4(sc, MIICFG, sc->miicfg); 904 905 break; 906 case EPIC_LXT970_PHY: 907 /* We have to powerup fiber tranceivers */ 908 cfg = PHY_READ(sc->physc, MII_LXTPHY_CONFIG); 909 if (IFM_SUBTYPE(media) == IFM_100_FX) 910 cfg |= CONFIG_LEDC1 | CONFIG_LEDC0; 911 else 912 cfg &= ~(CONFIG_LEDC1 | CONFIG_LEDC0); 913 PHY_WRITE(sc->physc, MII_LXTPHY_CONFIG, cfg); 914 915 break; 916 case EPIC_SERIAL: 917 /* Select serial PHY, (10base2/BNC usually) */ 918 sc->miicfg |= MIICFG_694_ENABLE | MIICFG_SERIAL_ENABLE; 919 CSR_WRITE_4(sc, MIICFG, sc->miicfg); 920 921 /* There is no driver to fill this */ 922 mii->mii_media_active = media; 923 mii->mii_media_status = 0; 924 925 /* We need to call this manualy as i wasn't called 926 * in mii_mediachg() 927 */ 928 epic_miibus_statchg(sc->dev); 929 930 break; 931 default: 932 if_printf(ifp, "ERROR! Unknown PHY selected\n"); 933 return (EINVAL); 934 } 935 936 return(0); 937 } 938 939 /* 940 * Report current media status. 941 */ 942 static void 943 epic_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 944 { 945 epic_softc_t *sc; 946 struct mii_data *mii; 947 struct ifmedia *ifm; 948 949 sc = ifp->if_softc; 950 mii = device_get_softc(sc->miibus); 951 ifm = &mii->mii_media; 952 953 /* Nothing should be selected if interface is down */ 954 if ((ifp->if_flags & IFF_UP) == 0) { 955 ifmr->ifm_active = IFM_NONE; 956 ifmr->ifm_status = 0; 957 958 return; 959 } 960 961 /* Call underlying pollstat, if not serial PHY */ 962 if (sc->phyid != EPIC_SERIAL) 963 mii_pollstat(mii); 964 965 /* Simply copy media info */ 966 ifmr->ifm_active = mii->mii_media_active; 967 ifmr->ifm_status = mii->mii_media_status; 968 969 return; 970 } 971 972 /* 973 * Callback routine, called on media change. 974 */ 975 static void 976 epic_miibus_statchg(device_t dev) 977 { 978 epic_softc_t *sc; 979 struct mii_data *mii; 980 int media; 981 982 sc = device_get_softc(dev); 983 mii = device_get_softc(sc->miibus); 984 media = mii->mii_media_active; 985 986 sc->txcon &= ~(TXCON_LOOPBACK_MODE | TXCON_FULL_DUPLEX); 987 988 /* If we are in full-duplex mode or loopback operation, 989 * we need to decouple receiver and transmitter. 990 */ 991 if (IFM_OPTIONS(media) & (IFM_FDX | IFM_LOOP)) 992 sc->txcon |= TXCON_FULL_DUPLEX; 993 994 /* On some cards we need manualy set fullduplex led */ 995 if (sc->cardid == SMC9432FTX || 996 sc->cardid == SMC9432FTX_SC) { 997 if (IFM_OPTIONS(media) & IFM_FDX) 998 sc->miicfg |= MIICFG_694_ENABLE; 999 else 1000 sc->miicfg &= ~MIICFG_694_ENABLE; 1001 1002 CSR_WRITE_4(sc, MIICFG, sc->miicfg); 1003 } 1004 1005 /* Update baudrate */ 1006 if (IFM_SUBTYPE(media) == IFM_100_TX || 1007 IFM_SUBTYPE(media) == IFM_100_FX) 1008 sc->sc_if.if_baudrate = 100000000; 1009 else 1010 sc->sc_if.if_baudrate = 10000000; 1011 1012 epic_stop_activity(sc); 1013 epic_set_tx_mode(sc); 1014 epic_start_activity(sc); 1015 1016 return; 1017 } 1018 1019 static void 1020 epic_miibus_mediainit(device_t dev) 1021 { 1022 epic_softc_t *sc; 1023 struct mii_data *mii; 1024 struct ifmedia *ifm; 1025 int media; 1026 1027 sc = device_get_softc(dev); 1028 mii = device_get_softc(sc->miibus); 1029 ifm = &mii->mii_media; 1030 1031 /* Add Serial Media Interface if present, this applies to 1032 * SMC9432BTX serie 1033 */ 1034 if (CSR_READ_4(sc, MIICFG) & MIICFG_PHY_PRESENT) { 1035 /* Store its instance */ 1036 sc->serinst = mii->mii_instance++; 1037 1038 /* Add as 10base2/BNC media */ 1039 media = IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc->serinst); 1040 ifmedia_add(ifm, media, 0, NULL); 1041 1042 /* Report to user */ 1043 if_printf(&sc->sc_if, "serial PHY detected (10Base2/BNC)\n"); 1044 } 1045 1046 return; 1047 } 1048 1049 /* 1050 * Reset chip, allocate rings, and update media. 1051 */ 1052 static int 1053 epic_init(epic_softc_t *sc) 1054 { 1055 struct ifnet *ifp = &sc->sc_if; 1056 int i; 1057 1058 /* If interface is already running, then we need not do anything */ 1059 if (ifp->if_flags & IFF_RUNNING) { 1060 return 0; 1061 } 1062 1063 /* Soft reset the chip (we have to power up card before) */ 1064 CSR_WRITE_4(sc, GENCTL, 0); 1065 CSR_WRITE_4(sc, GENCTL, GENCTL_SOFT_RESET); 1066 1067 /* 1068 * Reset takes 15 pci ticks which depends on PCI bus speed. 1069 * Assuming it >= 33000000 hz, we have wait at least 495e-6 sec. 1070 */ 1071 DELAY(500); 1072 1073 /* Wake up */ 1074 CSR_WRITE_4(sc, GENCTL, 0); 1075 1076 /* Workaround for Application Note 7-15 */ 1077 for (i=0; i<16; i++) CSR_WRITE_4(sc, TEST1, TEST1_CLOCK_TEST); 1078 1079 /* Initialize rings */ 1080 if (epic_init_rings(sc)) { 1081 if_printf(ifp, "failed to init rings\n"); 1082 return -1; 1083 } 1084 1085 /* Give rings to EPIC */ 1086 CSR_WRITE_4(sc, PRCDAR, vtophys(sc->rx_desc)); 1087 CSR_WRITE_4(sc, PTCDAR, vtophys(sc->tx_desc)); 1088 1089 /* Put node address to EPIC */ 1090 CSR_WRITE_4(sc, LAN0, ((u_int16_t *)sc->sc_macaddr)[0]); 1091 CSR_WRITE_4(sc, LAN1, ((u_int16_t *)sc->sc_macaddr)[1]); 1092 CSR_WRITE_4(sc, LAN2, ((u_int16_t *)sc->sc_macaddr)[2]); 1093 1094 /* Set tx mode, includeing transmit threshold */ 1095 epic_set_tx_mode(sc); 1096 1097 /* Compute and set RXCON. */ 1098 epic_set_rx_mode(sc); 1099 1100 /* Set multicast table */ 1101 epic_set_mc_table(sc); 1102 1103 /* Enable interrupts by setting the interrupt mask. */ 1104 CSR_WRITE_4(sc, INTMASK, 1105 INTSTAT_RCC | /* INTSTAT_RQE | INTSTAT_OVW | INTSTAT_RXE | */ 1106 /* INTSTAT_TXC | */ INTSTAT_TCC | INTSTAT_TQE | INTSTAT_TXU | 1107 INTSTAT_FATAL); 1108 1109 /* Acknowledge all pending interrupts */ 1110 CSR_WRITE_4(sc, INTSTAT, CSR_READ_4(sc, INTSTAT)); 1111 1112 /* Enable interrupts, set for PCI read multiple and etc */ 1113 CSR_WRITE_4(sc, GENCTL, 1114 GENCTL_ENABLE_INTERRUPT | GENCTL_MEMORY_READ_MULTIPLE | 1115 GENCTL_ONECOPY | GENCTL_RECEIVE_FIFO_THRESHOLD64); 1116 1117 /* Mark interface running ... */ 1118 if (ifp->if_flags & IFF_UP) ifp->if_flags |= IFF_RUNNING; 1119 else ifp->if_flags &= ~IFF_RUNNING; 1120 1121 /* ... and free */ 1122 ifp->if_flags &= ~IFF_OACTIVE; 1123 1124 /* Start Rx process */ 1125 epic_start_activity(sc); 1126 1127 /* Set appropriate media */ 1128 epic_ifmedia_upd(ifp); 1129 1130 callout_reset(&sc->tx_stat_timer, hz, epic_stats_update, sc); 1131 1132 return 0; 1133 } 1134 1135 /* 1136 * Synopsis: calculate and set Rx mode. Chip must be in idle state to 1137 * access RXCON. 1138 */ 1139 static void 1140 epic_set_rx_mode(epic_softc_t *sc) 1141 { 1142 u_int32_t flags = sc->sc_if.if_flags; 1143 u_int32_t rxcon = RXCON_DEFAULT; 1144 1145 #if defined(EPIC_EARLY_RX) 1146 rxcon |= RXCON_EARLY_RX; 1147 #endif 1148 1149 rxcon |= (flags & IFF_PROMISC) ? RXCON_PROMISCUOUS_MODE : 0; 1150 1151 CSR_WRITE_4(sc, RXCON, rxcon); 1152 1153 return; 1154 } 1155 1156 /* 1157 * Synopsis: Set transmit control register. Chip must be in idle state to 1158 * access TXCON. 1159 */ 1160 static void 1161 epic_set_tx_mode(epic_softc_t *sc) 1162 { 1163 if (sc->txcon & TXCON_EARLY_TRANSMIT_ENABLE) 1164 CSR_WRITE_4(sc, ETXTHR, sc->tx_threshold); 1165 1166 CSR_WRITE_4(sc, TXCON, sc->txcon); 1167 } 1168 1169 /* 1170 * Synopsis: Program multicast filter honoring IFF_ALLMULTI and IFF_PROMISC 1171 * flags. (Note, that setting PROMISC bit in EPIC's RXCON will only touch 1172 * individual frames, multicast filter must be manually programmed) 1173 * 1174 * Note: EPIC must be in idle state. 1175 */ 1176 static void 1177 epic_set_mc_table(epic_softc_t *sc) 1178 { 1179 struct ifnet *ifp = &sc->sc_if; 1180 struct ifmultiaddr *ifma; 1181 u_int16_t filter[4]; 1182 u_int8_t h; 1183 1184 if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) { 1185 CSR_WRITE_4(sc, MC0, 0xFFFF); 1186 CSR_WRITE_4(sc, MC1, 0xFFFF); 1187 CSR_WRITE_4(sc, MC2, 0xFFFF); 1188 CSR_WRITE_4(sc, MC3, 0xFFFF); 1189 1190 return; 1191 } 1192 1193 filter[0] = 0; 1194 filter[1] = 0; 1195 filter[2] = 0; 1196 filter[3] = 0; 1197 1198 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 1199 if (ifma->ifma_addr->sa_family != AF_LINK) 1200 continue; 1201 h = (ether_crc32_be( 1202 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 1203 ETHER_ADDR_LEN) >> 26) & 0x3f; 1204 filter[h >> 4] |= 1 << (h & 0xF); 1205 } 1206 1207 CSR_WRITE_4(sc, MC0, filter[0]); 1208 CSR_WRITE_4(sc, MC1, filter[1]); 1209 CSR_WRITE_4(sc, MC2, filter[2]); 1210 CSR_WRITE_4(sc, MC3, filter[3]); 1211 1212 return; 1213 } 1214 1215 /* 1216 * Synopsis: Start receive process and transmit one, if they need. 1217 */ 1218 static void 1219 epic_start_activity(epic_softc_t *sc) 1220 { 1221 /* Start rx process */ 1222 CSR_WRITE_4(sc, COMMAND, 1223 COMMAND_RXQUEUED | COMMAND_START_RX | 1224 (sc->pending_txs?COMMAND_TXQUEUED:0)); 1225 } 1226 1227 /* 1228 * Synopsis: Completely stop Rx and Tx processes. If TQE is set additional 1229 * packet needs to be queued to stop Tx DMA. 1230 */ 1231 static void 1232 epic_stop_activity(epic_softc_t *sc) 1233 { 1234 int status, i; 1235 1236 /* Stop Tx and Rx DMA */ 1237 CSR_WRITE_4(sc, COMMAND, 1238 COMMAND_STOP_RX | COMMAND_STOP_RDMA | COMMAND_STOP_TDMA); 1239 1240 /* Wait Rx and Tx DMA to stop (why 1 ms ??? XXX) */ 1241 for (i=0; i<0x1000; i++) { 1242 status = CSR_READ_4(sc, INTSTAT) & (INTSTAT_TXIDLE | INTSTAT_RXIDLE); 1243 if (status == (INTSTAT_TXIDLE | INTSTAT_RXIDLE)) 1244 break; 1245 DELAY(1); 1246 } 1247 1248 /* Catch all finished packets */ 1249 epic_rx_done(sc); 1250 epic_tx_done(sc); 1251 1252 status = CSR_READ_4(sc, INTSTAT); 1253 1254 if ((status & INTSTAT_RXIDLE) == 0) 1255 if_printf(&sc->sc_if, "ERROR! Can't stop Rx DMA\n"); 1256 1257 if ((status & INTSTAT_TXIDLE) == 0) 1258 if_printf(&sc->sc_if, "ERROR! Can't stop Tx DMA\n"); 1259 1260 /* 1261 * May need to queue one more packet if TQE, this is rare 1262 * but existing case. 1263 */ 1264 if ((status & INTSTAT_TQE) && !(status & INTSTAT_TXIDLE)) 1265 (void) epic_queue_last_packet(sc); 1266 1267 } 1268 1269 /* 1270 * The EPIC transmitter may stuck in TQE state. It will not go IDLE until 1271 * a packet from current descriptor will be copied to internal RAM. We 1272 * compose a dummy packet here and queue it for transmission. 1273 * 1274 * XXX the packet will then be actually sent over network... 1275 */ 1276 static int 1277 epic_queue_last_packet(epic_softc_t *sc) 1278 { 1279 struct epic_tx_desc *desc; 1280 struct epic_frag_list *flist; 1281 struct epic_tx_buffer *buf; 1282 struct mbuf *m0; 1283 int i; 1284 1285 if_printf(&sc->sc_if, "queue last packet\n"); 1286 1287 desc = sc->tx_desc + sc->cur_tx; 1288 flist = sc->tx_flist + sc->cur_tx; 1289 buf = sc->tx_buffer + sc->cur_tx; 1290 1291 if ((desc->status & 0x8000) || (buf->mbuf != NULL)) 1292 return (EBUSY); 1293 1294 MGETHDR(m0, MB_DONTWAIT, MT_DATA); 1295 if (NULL == m0) 1296 return (ENOBUFS); 1297 1298 /* Prepare mbuf */ 1299 m0->m_len = min(MHLEN, ETHER_MIN_LEN-ETHER_CRC_LEN); 1300 flist->frag[0].fraglen = m0->m_len; 1301 m0->m_pkthdr.len = m0->m_len; 1302 m0->m_pkthdr.rcvif = &sc->sc_if; 1303 bzero(mtod(m0,caddr_t), m0->m_len); 1304 1305 /* Fill fragments list */ 1306 flist->frag[0].fraglen = m0->m_len; 1307 flist->frag[0].fragaddr = vtophys(mtod(m0, caddr_t)); 1308 flist->numfrags = 1; 1309 1310 /* Fill in descriptor */ 1311 buf->mbuf = m0; 1312 sc->pending_txs++; 1313 sc->cur_tx = (sc->cur_tx + 1) & TX_RING_MASK; 1314 desc->control = 0x01; 1315 desc->txlength = max(m0->m_pkthdr.len,ETHER_MIN_LEN-ETHER_CRC_LEN); 1316 desc->status = 0x8000; 1317 1318 /* Launch transmition */ 1319 CSR_WRITE_4(sc, COMMAND, COMMAND_STOP_TDMA | COMMAND_TXQUEUED); 1320 1321 /* Wait Tx DMA to stop (for how long??? XXX) */ 1322 for (i=0; i<1000; i++) { 1323 if (CSR_READ_4(sc, INTSTAT) & INTSTAT_TXIDLE) 1324 break; 1325 DELAY(1); 1326 } 1327 1328 if ((CSR_READ_4(sc, INTSTAT) & INTSTAT_TXIDLE) == 0) 1329 if_printf(&sc->sc_if, "ERROR! can't stop Tx DMA (2)\n"); 1330 else 1331 epic_tx_done(sc); 1332 1333 return 0; 1334 } 1335 1336 /* 1337 * Synopsis: Shut down board and deallocates rings. 1338 */ 1339 static void 1340 epic_stop(epic_softc_t *sc) 1341 { 1342 sc->sc_if.if_timer = 0; 1343 1344 callout_stop(&sc->tx_stat_timer); 1345 1346 /* Disable interrupts */ 1347 CSR_WRITE_4(sc, INTMASK, 0); 1348 CSR_WRITE_4(sc, GENCTL, 0); 1349 1350 /* Try to stop Rx and TX processes */ 1351 epic_stop_activity(sc); 1352 1353 /* Reset chip */ 1354 CSR_WRITE_4(sc, GENCTL, GENCTL_SOFT_RESET); 1355 DELAY(1000); 1356 1357 /* Make chip go to bed */ 1358 CSR_WRITE_4(sc, GENCTL, GENCTL_POWER_DOWN); 1359 1360 /* Free memory allocated for rings */ 1361 epic_free_rings(sc); 1362 1363 /* Mark as stoped */ 1364 sc->sc_if.if_flags &= ~IFF_RUNNING; 1365 } 1366 1367 /* 1368 * Synopsis: This function should free all memory allocated for rings. 1369 */ 1370 static void 1371 epic_free_rings(epic_softc_t *sc) 1372 { 1373 int i; 1374 1375 for (i=0; i<RX_RING_SIZE; i++) { 1376 struct epic_rx_buffer *buf = sc->rx_buffer + i; 1377 struct epic_rx_desc *desc = sc->rx_desc + i; 1378 1379 desc->status = 0; 1380 desc->buflength = 0; 1381 desc->bufaddr = 0; 1382 1383 if (buf->mbuf) m_freem(buf->mbuf); 1384 buf->mbuf = NULL; 1385 } 1386 1387 for (i=0; i<TX_RING_SIZE; i++) { 1388 struct epic_tx_buffer *buf = sc->tx_buffer + i; 1389 struct epic_tx_desc *desc = sc->tx_desc + i; 1390 1391 desc->status = 0; 1392 desc->buflength = 0; 1393 desc->bufaddr = 0; 1394 1395 if (buf->mbuf) m_freem(buf->mbuf); 1396 buf->mbuf = NULL; 1397 } 1398 } 1399 1400 /* 1401 * Synopsis: Allocates mbufs for Rx ring and point Rx descs to them. 1402 * Point Tx descs to fragment lists. Check that all descs and fraglists 1403 * are bounded and aligned properly. 1404 */ 1405 static int 1406 epic_init_rings(epic_softc_t *sc) 1407 { 1408 int i; 1409 1410 sc->cur_rx = sc->cur_tx = sc->dirty_tx = sc->pending_txs = 0; 1411 1412 for (i = 0; i < RX_RING_SIZE; i++) { 1413 struct epic_rx_buffer *buf = sc->rx_buffer + i; 1414 struct epic_rx_desc *desc = sc->rx_desc + i; 1415 1416 desc->status = 0; /* Owned by driver */ 1417 desc->next = vtophys(sc->rx_desc + ((i+1) & RX_RING_MASK)); 1418 1419 if ((desc->next & 3) || 1420 ((desc->next & PAGE_MASK) + sizeof *desc) > PAGE_SIZE) { 1421 epic_free_rings(sc); 1422 return EFAULT; 1423 } 1424 1425 buf->mbuf = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR); 1426 if (NULL == buf->mbuf) { 1427 epic_free_rings(sc); 1428 return ENOBUFS; 1429 } 1430 desc->bufaddr = vtophys(mtod(buf->mbuf, caddr_t)); 1431 1432 desc->buflength = MCLBYTES; /* Max RX buffer length */ 1433 desc->status = 0x8000; /* Set owner bit to NIC */ 1434 } 1435 1436 for (i = 0; i < TX_RING_SIZE; i++) { 1437 struct epic_tx_buffer *buf = sc->tx_buffer + i; 1438 struct epic_tx_desc *desc = sc->tx_desc + i; 1439 1440 desc->status = 0; 1441 desc->next = vtophys(sc->tx_desc + ((i+1) & TX_RING_MASK)); 1442 1443 if ((desc->next & 3) || 1444 ((desc->next & PAGE_MASK) + sizeof *desc) > PAGE_SIZE) { 1445 epic_free_rings(sc); 1446 return EFAULT; 1447 } 1448 1449 buf->mbuf = NULL; 1450 desc->bufaddr = vtophys(sc->tx_flist + i); 1451 1452 if ((desc->bufaddr & 3) || 1453 ((desc->bufaddr & PAGE_MASK) + sizeof(struct epic_frag_list)) > PAGE_SIZE) { 1454 epic_free_rings(sc); 1455 return EFAULT; 1456 } 1457 } 1458 1459 return 0; 1460 } 1461 1462 /* 1463 * EEPROM operation functions 1464 */ 1465 static void 1466 epic_write_eepromreg(epic_softc_t *sc, u_int8_t val) 1467 { 1468 u_int16_t i; 1469 1470 CSR_WRITE_1(sc, EECTL, val); 1471 1472 for (i=0; i<0xFF; i++) 1473 if ((CSR_READ_1(sc, EECTL) & 0x20) == 0) break; 1474 1475 return; 1476 } 1477 1478 static u_int8_t 1479 epic_read_eepromreg(epic_softc_t *sc) 1480 { 1481 return CSR_READ_1(sc, EECTL); 1482 } 1483 1484 static u_int8_t 1485 epic_eeprom_clock(epic_softc_t *sc, u_int8_t val) 1486 { 1487 epic_write_eepromreg(sc, val); 1488 epic_write_eepromreg(sc, (val | 0x4)); 1489 epic_write_eepromreg(sc, val); 1490 1491 return epic_read_eepromreg(sc); 1492 } 1493 1494 static void 1495 epic_output_eepromw(epic_softc_t *sc, u_int16_t val) 1496 { 1497 int i; 1498 1499 for (i = 0xF; i >= 0; i--) { 1500 if (val & (1 << i)) 1501 epic_eeprom_clock(sc, 0x0B); 1502 else 1503 epic_eeprom_clock(sc, 0x03); 1504 } 1505 } 1506 1507 static u_int16_t 1508 epic_input_eepromw(epic_softc_t *sc) 1509 { 1510 u_int16_t retval = 0; 1511 int i; 1512 1513 for (i = 0xF; i >= 0; i--) { 1514 if (epic_eeprom_clock(sc, 0x3) & 0x10) 1515 retval |= (1 << i); 1516 } 1517 1518 return retval; 1519 } 1520 1521 static int 1522 epic_read_eeprom(epic_softc_t *sc, u_int16_t loc) 1523 { 1524 u_int16_t dataval; 1525 u_int16_t read_cmd; 1526 1527 epic_write_eepromreg(sc, 3); 1528 1529 if (epic_read_eepromreg(sc) & 0x40) 1530 read_cmd = (loc & 0x3F) | 0x180; 1531 else 1532 read_cmd = (loc & 0xFF) | 0x600; 1533 1534 epic_output_eepromw(sc, read_cmd); 1535 1536 dataval = epic_input_eepromw(sc); 1537 1538 epic_write_eepromreg(sc, 1); 1539 1540 return dataval; 1541 } 1542 1543 /* 1544 * Here goes MII read/write routines 1545 */ 1546 static int 1547 epic_read_phy_reg(epic_softc_t *sc, int phy, int reg) 1548 { 1549 int i; 1550 1551 CSR_WRITE_4(sc, MIICTL, ((reg << 4) | (phy << 9) | 0x01)); 1552 1553 for (i = 0; i < 0x100; i++) { 1554 if ((CSR_READ_4(sc, MIICTL) & 0x01) == 0) break; 1555 DELAY(1); 1556 } 1557 1558 return (CSR_READ_4(sc, MIIDATA)); 1559 } 1560 1561 static void 1562 epic_write_phy_reg(epic_softc_t *sc, int phy, int reg, int val) 1563 { 1564 int i; 1565 1566 CSR_WRITE_4(sc, MIIDATA, val); 1567 CSR_WRITE_4(sc, MIICTL, ((reg << 4) | (phy << 9) | 0x02)); 1568 1569 for(i=0;i<0x100;i++) { 1570 if ((CSR_READ_4(sc, MIICTL) & 0x02) == 0) break; 1571 DELAY(1); 1572 } 1573 1574 return; 1575 } 1576 1577 static int 1578 epic_miibus_readreg(device_t dev, int phy, int reg) 1579 { 1580 epic_softc_t *sc; 1581 1582 sc = device_get_softc(dev); 1583 1584 return (PHY_READ_2(sc, phy, reg)); 1585 } 1586 1587 static int 1588 epic_miibus_writereg(device_t dev, int phy, int reg, int data) 1589 { 1590 epic_softc_t *sc; 1591 1592 sc = device_get_softc(dev); 1593 1594 PHY_WRITE_2(sc, phy, reg, data); 1595 1596 return (0); 1597 } 1598