xref: /dragonfly/sys/dev/powermng/viapm/viapm.c (revision cfd1aba3)
1 /*-
2  * Copyright (c) 2001 Alcove - Nicolas Souchu
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  * $FreeBSD: src/sys/pci/viapm.c,v 1.10.2.3 2006/09/22 19:19:16 jhb Exp $
27  *
28  */
29 #include <sys/param.h>
30 #include <sys/kernel.h>
31 #include <sys/systm.h>
32 #include <sys/module.h>
33 #include <sys/bus.h>
34 #include <sys/uio.h>
35 #include <sys/rman.h>
36 
37 #include <machine/clock.h>		/* for DELAY */
38 
39 #include <bus/pci/pcivar.h>
40 #include <bus/pci/pcireg.h>
41 
42 #include <bus/iicbus/iiconf.h>
43 
44 #include <bus/smbus/smbconf.h>
45 
46 #include "iicbb_if.h"
47 #include "smbus_if.h"
48 
49 #define VIAPM_DEBUG(x)	if (viapm_debug) (x)
50 
51 #ifdef DEBUG
52 static int viapm_debug = 1;
53 #else
54 static int viapm_debug = 0;
55 #endif
56 
57 #define VIA_586B_PMU_ID		0x30401106
58 #define VIA_596A_PMU_ID		0x30501106
59 #define VIA_596B_PMU_ID		0x30511106
60 #define VIA_686A_PMU_ID		0x30571106
61 #define VIA_8233_PMU_ID		0x30741106
62 #define	VIA_8233A_PMU_ID	0x31471106
63 #define	VIA_8235_PMU_ID		0x31771106
64 
65 #define VIAPM_INB(port) \
66 	((u_char)bus_space_read_1(viapm->st, viapm->sh, port))
67 #define VIAPM_OUTB(port,val) \
68 	(bus_space_write_1(viapm->st, viapm->sh, port, (u_char)(val)))
69 
70 #define VIAPM_TYP_UNKNOWN	0
71 #define VIAPM_TYP_586B_3040E	1
72 #define VIAPM_TYP_586B_3040F	2
73 #define VIAPM_TYP_596B		3
74 #define VIAPM_TYP_686A		4
75 #define VIAPM_TYP_8233		5
76 
77 struct viapm_softc {
78 	int type;
79 	u_int32_t base;
80         bus_space_tag_t st;
81         bus_space_handle_t sh;
82 	int iorid;
83 	int irqrid;
84 	struct resource *iores;
85 	struct resource *irqres;
86 	void *irqih;
87 
88 	device_t iicbb;
89 	device_t smbus;
90 };
91 
92 static devclass_t viapm_devclass;
93 static devclass_t viapropm_devclass;
94 
95 /*
96  * VT82C586B definitions
97  */
98 
99 #define VIAPM_586B_REVID	0x08
100 
101 #define VIAPM_586B_3040E_BASE	0x20
102 #define VIAPM_586B_3040E_ACTIV	0x4		/* 16 bits */
103 
104 #define VIAPM_586B_3040F_BASE	0x48
105 #define VIAPM_586B_3040F_ACTIV	0x41		/* 8 bits */
106 
107 #define VIAPM_586B_OEM_REV_E	0x00
108 #define VIAPM_586B_OEM_REV_F	0x01
109 #define VIAPM_586B_PROD_REV_A	0x10
110 
111 #define VIAPM_586B_BA_MASK	0x0000ff00
112 
113 #define GPIO_DIR	0x40
114 #define GPIO_VAL	0x42
115 #define EXTSMI_VAL	0x44
116 
117 #define VIAPM_SCL	0x02			/* GPIO1_VAL */
118 #define VIAPM_SDA	0x04			/* GPIO2_VAL */
119 
120 /*
121  * VIAPRO common definitions
122  */
123 
124 #define VIAPM_PRO_BA_MASK	0x0000fff0
125 #define VIAPM_PRO_SMBCTRL	0xd2
126 #define VIAPM_PRO_REVID		0xd6
127 
128 /*
129  * VT82C686A definitions
130  */
131 
132 #define VIAPM_PRO_BASE		0x90
133 
134 #define SMBHST			0x0
135 #define SMBHSL			0x1
136 #define SMBHCTRL		0x2
137 #define SMBHCMD			0x3
138 #define SMBHADDR		0x4
139 #define SMBHDATA0		0x5
140 #define SMBHDATA1		0x6
141 #define SMBHBLOCK		0x7
142 
143 #define SMBSST			0x1
144 #define SMBSCTRL		0x8
145 #define SMBSSDWCMD		0x9
146 #define SMBSEVENT		0xa
147 #define SMBSDATA		0xc
148 
149 #define SMBHST_RESERVED		0xef	/* reserved bits */
150 #define SMBHST_FAILED		0x10	/* failed bus transaction */
151 #define SMBHST_COLLID		0x08	/* bus collision */
152 #define SMBHST_ERROR		0x04	/* device error */
153 #define SMBHST_INTR		0x02	/* command completed */
154 #define SMBHST_BUSY		0x01	/* host busy */
155 
156 #define SMBHCTRL_START		0x40	/* start command */
157 #define SMBHCTRL_PROTO		0x1c	/* command protocol mask */
158 #define SMBHCTRL_QUICK		0x00
159 #define SMBHCTRL_SENDRECV	0x04
160 #define SMBHCTRL_BYTE		0x08
161 #define SMBHCTRL_WORD		0x0c
162 #define SMBHCTRL_BLOCK		0x14
163 #define SMBHCTRL_KILL		0x02	/* stop the current transaction */
164 #define SMBHCTRL_ENABLE		0x01	/* enable interrupts */
165 
166 #define SMBSCTRL_ENABLE		0x01	/* enable slave */
167 
168 
169 /*
170  * VIA8233 definitions
171  */
172 
173 #define VIAPM_8233_BASE		0xD0
174 
175 static int
176 viapm_586b_probe(device_t dev)
177 {
178 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
179 	u_int32_t l;
180 	u_int16_t s;
181 	u_int8_t c;
182 
183 	switch (pci_get_devid(dev)) {
184 	case VIA_586B_PMU_ID:
185 
186 		bzero(viapm, sizeof(struct viapm_softc));
187 
188 		l = pci_read_config(dev, VIAPM_586B_REVID, 1);
189 		switch (l) {
190 		case VIAPM_586B_OEM_REV_E:
191 			viapm->type = VIAPM_TYP_586B_3040E;
192 			viapm->iorid = VIAPM_586B_3040E_BASE;
193 
194 			/* Activate IO block access */
195 			s = pci_read_config(dev, VIAPM_586B_3040E_ACTIV, 2);
196 			pci_write_config(dev, VIAPM_586B_3040E_ACTIV, s | 0x1, 2);
197 			break;
198 
199 		case VIAPM_586B_OEM_REV_F:
200 		case VIAPM_586B_PROD_REV_A:
201 		default:
202 			viapm->type = VIAPM_TYP_586B_3040F;
203 			viapm->iorid = VIAPM_586B_3040F_BASE;
204 
205 			/* Activate IO block access */
206 			c = pci_read_config(dev, VIAPM_586B_3040F_ACTIV, 1);
207 			pci_write_config(dev, VIAPM_586B_3040F_ACTIV, c | 0x80, 1);
208 			break;
209 		}
210 
211 		viapm->base = pci_read_config(dev, viapm->iorid, 4) &
212 				VIAPM_586B_BA_MASK;
213 
214 		/*
215 		 * We have to set the I/O resources by hand because it is
216 		 * described outside the viapmope of the traditional maps
217 		 */
218 		if (bus_set_resource(dev, SYS_RES_IOPORT, viapm->iorid,
219 		    viapm->base, 256, -1)) {
220 			device_printf(dev, "could not set bus resource\n");
221 			return ENXIO;
222 		}
223 		device_set_desc(dev, "VIA VT82C586B Power Management Unit");
224 		return (BUS_PROBE_DEFAULT);
225 
226 	default:
227 		break;
228 	}
229 
230 	return ENXIO;
231 }
232 
233 
234 static int
235 viapm_pro_probe(device_t dev)
236 {
237 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
238 #ifdef VIAPM_BASE_ADDR
239 	u_int32_t l;
240 #endif
241 	u_int32_t base_cfgreg;
242 	char *desc;
243 
244 	switch (pci_get_devid(dev)) {
245 	case VIA_596A_PMU_ID:
246 		desc = "VIA VT82C596A Power Management Unit";
247 		viapm->type = VIAPM_TYP_596B;
248 		base_cfgreg = VIAPM_PRO_BASE;
249 		goto viapro;
250 
251 	case VIA_596B_PMU_ID:
252 		desc = "VIA VT82C596B Power Management Unit";
253 		viapm->type = VIAPM_TYP_596B;
254 		base_cfgreg = VIAPM_PRO_BASE;
255 		goto viapro;
256 
257 	case VIA_686A_PMU_ID:
258 		desc = "VIA VT82C686A Power Management Unit";
259 		viapm->type = VIAPM_TYP_686A;
260 		base_cfgreg = VIAPM_PRO_BASE;
261 		goto viapro;
262 
263 	case VIA_8233_PMU_ID:
264 	case VIA_8233A_PMU_ID:
265 		desc = "VIA VT8233 Power Management Unit";
266 		viapm->type = VIAPM_TYP_UNKNOWN;
267 		base_cfgreg = VIAPM_8233_BASE;
268 		goto viapro;
269 
270 	case VIA_8235_PMU_ID:
271 		desc = "VIA VT8235 Power Management Unit";
272 		viapm->type = VIAPM_TYP_UNKNOWN;
273 		base_cfgreg = VIAPM_8233_BASE;
274 		goto viapro;
275 
276 	viapro:
277 
278 #ifdef VIAPM_BASE_ADDR
279 		/* force VIAPM I/O base address */
280 
281 		/* enable the SMBus controller function */
282 		l = pci_read_config(dev, VIAPM_PRO_SMBCTRL, 1);
283 		pci_write_config(dev, VIAPM_PRO_SMBCTRL, l | 1, 1);
284 
285 		/* write the base address */
286 		pci_write_config(dev, base_cfgreg,
287 				 VIAPM_BASE_ADDR & VIAPM_PRO_BA_MASK, 4);
288 #endif
289 
290 		viapm->base = pci_read_config(dev, base_cfgreg, 4) & VIAPM_PRO_BA_MASK;
291 
292 		/*
293 		 * We have to set the I/O resources by hand because it is
294 		 * described outside the viapmope of the traditional maps
295 		 */
296 		viapm->iorid = base_cfgreg;
297 		if (bus_set_resource(dev, SYS_RES_IOPORT, viapm->iorid,
298 				     viapm->base, 16, -1)) {
299 			device_printf(dev, "could not set bus resource 0x%x\n",
300 					viapm->base);
301 			return ENXIO;
302 		}
303 
304 		if (1 || bootverbose) {
305 			device_printf(dev, "SMBus I/O base at 0x%x\n", viapm->base);
306 		}
307 
308 		device_set_desc(dev, desc);
309 		return (BUS_PROBE_DEFAULT);
310 
311 	default:
312 		break;
313 	}
314 
315 	return ENXIO;
316 }
317 
318 static int
319 viapm_pro_attach(device_t dev)
320 {
321 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
322 	u_int32_t l;
323 #ifdef	notyet
324 	int error;
325 #endif
326 
327 	if (!(viapm->iores = bus_alloc_resource(dev, SYS_RES_IOPORT,
328 		&viapm->iorid, 0l, ~0l, 1, RF_ACTIVE))) {
329 		device_printf(dev, "could not allocate bus space\n");
330 		goto fail;
331 	}
332 	viapm->st = rman_get_bustag(viapm->iores);
333 	viapm->sh = rman_get_bushandle(viapm->iores);
334 
335 #ifdef notyet
336 	/* force irq 9 */
337 	l = pci_read_config(dev, VIAPM_PRO_SMBCTRL, 1);
338 	pci_write_config(dev, VIAPM_PRO_SMBCTRL, l | 0x80, 1);
339 
340 	viapm->irqrid = 0;
341 	if (!(viapm->irqres = bus_alloc_resource(dev, SYS_RES_IRQ,
342 				&viapm->irqrid, 9, 9, 1,
343 				RF_SHAREABLE | RF_ACTIVE))) {
344 		device_printf(dev, "could not allocate irq\n");
345 		goto fail;
346 	}
347 
348 	error = bus_setup_intr(dev, viapm->irqres, 0,
349 			       (driver_intr_t *) viasmb_intr, viapm,
350 			       &viapm->irqih, NULL);
351 	if (error) {
352 		device_printf(dev, "could not setup irq\n");
353 		goto fail;
354 	}
355 #endif
356 
357 	if (1 | bootverbose) {
358 		l = pci_read_config(dev, VIAPM_PRO_REVID, 1);
359 		device_printf(dev, "SMBus revision code 0x%x\n", l);
360 	}
361 
362 	viapm->smbus = device_add_child(dev, "smbus", -1);
363 
364 	/* probe and attach the smbus */
365 	bus_generic_attach(dev);
366 
367 	/* disable slave function */
368 	VIAPM_OUTB(SMBSCTRL, VIAPM_INB(SMBSCTRL) & ~SMBSCTRL_ENABLE);
369 
370 	/* enable the SMBus controller function */
371 	l = pci_read_config(dev, VIAPM_PRO_SMBCTRL, 1);
372 	pci_write_config(dev, VIAPM_PRO_SMBCTRL, l | 1, 1);
373 
374 #ifdef notyet
375 	/* enable interrupts */
376 	VIAPM_OUTB(SMBHCTRL, VIAPM_INB(SMBHCTRL) | SMBHCTRL_ENABLE);
377 #endif
378 
379 	return 0;
380 
381 fail:
382 	if (viapm->iores)
383 		bus_release_resource(dev, SYS_RES_IOPORT, viapm->iorid, viapm->iores);
384 #ifdef notyet
385 	if (viapm->irqres)
386 		bus_release_resource(dev, SYS_RES_IRQ, viapm->irqrid, viapm->irqres);
387 #endif
388 
389 	return ENXIO;
390 }
391 
392 static int
393 viapm_586b_attach(device_t dev)
394 {
395 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
396 
397 	if (!(viapm->iores = bus_alloc_resource(dev, SYS_RES_IOPORT,
398 		&viapm->iorid, 0ul, ~0ul, 1, RF_ACTIVE | RF_SHAREABLE))) {
399 		device_printf(dev, "could not allocate bus resource\n");
400 		return ENXIO;
401 	}
402 	viapm->st = rman_get_bustag(viapm->iores);
403 	viapm->sh = rman_get_bushandle(viapm->iores);
404 
405 	VIAPM_OUTB(GPIO_DIR, VIAPM_INB(GPIO_DIR) | VIAPM_SCL | VIAPM_SDA);
406 
407 	/* add generic bit-banging code */
408 	if (!(viapm->iicbb = device_add_child(dev, "iicbb", -1)))
409 		goto error;
410 
411 	bus_generic_attach(dev);
412 
413 	return 0;
414 
415 error:
416 	if (viapm->iores)
417 		bus_release_resource(dev, SYS_RES_IOPORT,
418 					viapm->iorid, viapm->iores);
419 	return ENXIO;
420 }
421 
422 static int
423 viapm_586b_detach(device_t dev)
424 {
425 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
426 	int error;
427 
428 	bus_generic_detach(dev);
429 	if (viapm->iicbb) {
430 		device_delete_child(dev, viapm->iicbb);
431 	}
432 
433 	if (viapm->iores && (error = bus_release_resource(dev, SYS_RES_IOPORT,
434 						viapm->iorid, viapm->iores)))
435 		return (error);
436 
437 	return 0;
438 }
439 
440 static int
441 viapm_pro_detach(device_t dev)
442 {
443 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
444 	int error;
445 
446 	bus_generic_detach(dev);
447 	if (viapm->smbus) {
448 		device_delete_child(dev, viapm->smbus);
449 	}
450 
451 	if ((error = bus_release_resource(dev, SYS_RES_IOPORT,
452 				viapm->iorid, viapm->iores)))
453 		return (error);
454 
455 #ifdef notyet
456 	if ((error = bus_release_resource(dev, SYS_RES_IRQ,
457 					viapm->irqrid, viapm->irqres)))
458 		return (error);
459 #endif
460 
461 	return 0;
462 }
463 
464 static int
465 viabb_callback(device_t dev, int index, caddr_t *data)
466 {
467 	return 0;
468 }
469 
470 static void
471 viabb_setscl(device_t dev, int ctrl)
472 {
473 	struct viapm_softc *viapm = device_get_softc(dev);
474 	u_char val;
475 
476 	val = VIAPM_INB(GPIO_VAL);
477 
478 	if (ctrl)
479 		val |= VIAPM_SCL;
480 	else
481 		val &= ~VIAPM_SCL;
482 
483 	VIAPM_OUTB(GPIO_VAL, val);
484 
485 	return;
486 }
487 
488 static void
489 viabb_setsda(device_t dev, int data)
490 {
491 	struct viapm_softc *viapm = device_get_softc(dev);
492 	u_char val;
493 
494 	val = VIAPM_INB(GPIO_VAL);
495 
496 	if (data)
497 		val |= VIAPM_SDA;
498 	else
499 		val &= ~VIAPM_SDA;
500 
501 	VIAPM_OUTB(GPIO_VAL, val);
502 
503 	return;
504 }
505 
506 static int
507 viabb_reset(device_t dev, u_char speed, u_char addr, u_char *oldaddr)
508 {
509 	/* reset bus */
510 	viabb_setsda(dev, 1);
511 	viabb_setscl(dev, 1);
512 
513 	return (IIC_ENOADDR);
514 }
515 
516 static int
517 viabb_getscl(device_t dev)
518 {
519 	struct viapm_softc *viapm = device_get_softc(dev);
520 
521 	return ((VIAPM_INB(EXTSMI_VAL) & VIAPM_SCL) != 0);
522 }
523 
524 static int
525 viabb_getsda(device_t dev)
526 {
527 	struct viapm_softc *viapm = device_get_softc(dev);
528 
529 	return ((VIAPM_INB(EXTSMI_VAL) & VIAPM_SDA) != 0);
530 }
531 
532 static int
533 viapm_abort(struct viapm_softc *viapm)
534 {
535 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_KILL);
536 	DELAY(10);
537 
538 	return (0);
539 }
540 
541 static int
542 viapm_clear(struct viapm_softc *viapm)
543 {
544 	VIAPM_OUTB(SMBHST, SMBHST_FAILED | SMBHST_COLLID |
545 		SMBHST_ERROR | SMBHST_INTR);
546 	DELAY(10);
547 
548 	return (0);
549 }
550 
551 static int
552 viapm_busy(struct viapm_softc *viapm)
553 {
554 	u_char sts;
555 
556 	sts = VIAPM_INB(SMBHST);
557 
558 	VIAPM_DEBUG(kprintf("viapm: idle? STS=0x%x\n", sts));
559 
560 	return (sts & SMBHST_BUSY);
561 }
562 
563 /*
564  * Poll the SMBus controller
565  */
566 static int
567 viapm_wait(struct viapm_softc *viapm)
568 {
569 	int count = 10000;
570 	u_char sts = 0;
571 	int error;
572 
573 	/* wait for command to complete and SMBus controller is idle */
574 	while(count--) {
575 		DELAY(10);
576 		sts = VIAPM_INB(SMBHST);
577 
578 		/* check if the controller is processing a command */
579 		if (!(sts & SMBHST_BUSY) && (sts & SMBHST_INTR))
580 			break;
581 	}
582 
583 	VIAPM_DEBUG(kprintf("viapm: SMBHST=0x%x\n", sts));
584 
585 	error = SMB_ENOERR;
586 
587 	if (!count)
588 		error |= SMB_ETIMEOUT;
589 
590 	if (sts & SMBHST_FAILED)
591 		error |= SMB_EABORT;
592 
593 	if (sts & SMBHST_COLLID)
594 		error |= SMB_ENOACK;
595 
596 	if (sts & SMBHST_ERROR)
597 		error |= SMB_EBUSERR;
598 
599 	if (error != SMB_ENOERR)
600 		viapm_abort(viapm);
601 
602 	viapm_clear(viapm);
603 
604 	return (error);
605 }
606 
607 static int
608 viasmb_callback(device_t dev, int index, caddr_t *data)
609 {
610 	int error = 0;
611 
612 	switch (index) {
613 	case SMB_REQUEST_BUS:
614 	case SMB_RELEASE_BUS:
615 		/* ok, bus allocation accepted */
616 		break;
617 	default:
618 		error = EINVAL;
619 	}
620 
621 	return (error);
622 }
623 
624 static int
625 viasmb_quick(device_t dev, u_char slave, int how)
626 {
627 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
628 	int error;
629 
630 	viapm_clear(viapm);
631 	if (viapm_busy(viapm))
632 		return (SMB_EBUSY);
633 
634 	switch (how) {
635 	case SMB_QWRITE:
636 		VIAPM_DEBUG(kprintf("viapm: QWRITE to 0x%x", slave));
637 		VIAPM_OUTB(SMBHADDR, slave & ~LSB);
638 		break;
639 	case SMB_QREAD:
640 		VIAPM_DEBUG(kprintf("viapm: QREAD to 0x%x", slave));
641 		VIAPM_OUTB(SMBHADDR, slave | LSB);
642 		break;
643 	default:
644 		panic("%s: unknown QUICK command (%x)!", __func__, how);
645 	}
646 
647 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_QUICK);
648 
649 	error = viapm_wait(viapm);
650 
651 	return (error);
652 }
653 
654 static int
655 viasmb_sendb(device_t dev, u_char slave, char byte)
656 {
657 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
658 	int error;
659 
660 	viapm_clear(viapm);
661 	if (viapm_busy(viapm))
662 		return (SMB_EBUSY);
663 
664 	VIAPM_OUTB(SMBHADDR, slave & ~ LSB);
665 	VIAPM_OUTB(SMBHCMD, byte);
666 
667 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_SENDRECV);
668 
669 	error = viapm_wait(viapm);
670 
671 	VIAPM_DEBUG(kprintf("viapm: SENDB to 0x%x, byte=0x%x, error=0x%x\n", slave, byte, error));
672 
673 	return (error);
674 }
675 
676 static int
677 viasmb_recvb(device_t dev, u_char slave, char *byte)
678 {
679 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
680 	int error;
681 
682 	viapm_clear(viapm);
683 	if (viapm_busy(viapm))
684 		return (SMB_EBUSY);
685 
686 	VIAPM_OUTB(SMBHADDR, slave | LSB);
687 
688 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_SENDRECV);
689 
690 	if ((error = viapm_wait(viapm)) == SMB_ENOERR)
691 		*byte = VIAPM_INB(SMBHDATA0);
692 
693 	VIAPM_DEBUG(kprintf("viapm: RECVB from 0x%x, byte=0x%x, error=0x%x\n", slave, *byte, error));
694 
695 	return (error);
696 }
697 
698 static int
699 viasmb_writeb(device_t dev, u_char slave, char cmd, char byte)
700 {
701 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
702 	int error;
703 
704 	viapm_clear(viapm);
705 	if (viapm_busy(viapm))
706 		return (SMB_EBUSY);
707 
708 	VIAPM_OUTB(SMBHADDR, slave & ~ LSB);
709 	VIAPM_OUTB(SMBHCMD, cmd);
710 	VIAPM_OUTB(SMBHDATA0, byte);
711 
712 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_BYTE);
713 
714 	error = viapm_wait(viapm);
715 
716 	VIAPM_DEBUG(kprintf("viapm: WRITEB to 0x%x, cmd=0x%x, byte=0x%x, error=0x%x\n", slave, cmd, byte, error));
717 
718 	return (error);
719 }
720 
721 static int
722 viasmb_readb(device_t dev, u_char slave, char cmd, char *byte)
723 {
724 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
725 	int error;
726 
727 	viapm_clear(viapm);
728 	if (viapm_busy(viapm))
729 		return (SMB_EBUSY);
730 
731 	VIAPM_OUTB(SMBHADDR, slave | LSB);
732 	VIAPM_OUTB(SMBHCMD, cmd);
733 
734 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_BYTE);
735 
736 	if ((error = viapm_wait(viapm)) == SMB_ENOERR)
737 		*byte = VIAPM_INB(SMBHDATA0);
738 
739 	VIAPM_DEBUG(kprintf("viapm: READB from 0x%x, cmd=0x%x, byte=0x%x, error=0x%x\n", slave, cmd, *byte, error));
740 
741 	return (error);
742 }
743 
744 static int
745 viasmb_writew(device_t dev, u_char slave, char cmd, short word)
746 {
747 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
748 	int error;
749 
750 	viapm_clear(viapm);
751 	if (viapm_busy(viapm))
752 		return (SMB_EBUSY);
753 
754 	VIAPM_OUTB(SMBHADDR, slave & ~ LSB);
755 	VIAPM_OUTB(SMBHCMD, cmd);
756 	VIAPM_OUTB(SMBHDATA0, word & 0x00ff);
757 	VIAPM_OUTB(SMBHDATA1, (word & 0xff00) >> 8);
758 
759 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_WORD);
760 
761 	error = viapm_wait(viapm);
762 
763 	VIAPM_DEBUG(kprintf("viapm: WRITEW to 0x%x, cmd=0x%x, word=0x%x, error=0x%x\n", slave, cmd, word, error));
764 
765 	return (error);
766 }
767 
768 static int
769 viasmb_readw(device_t dev, u_char slave, char cmd, short *word)
770 {
771 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
772 	int error;
773 	u_char high, low;
774 
775 	viapm_clear(viapm);
776 	if (viapm_busy(viapm))
777 		return (SMB_EBUSY);
778 
779 	VIAPM_OUTB(SMBHADDR, slave | LSB);
780 	VIAPM_OUTB(SMBHCMD, cmd);
781 
782 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_WORD);
783 
784 	if ((error = viapm_wait(viapm)) == SMB_ENOERR) {
785 		low = VIAPM_INB(SMBHDATA0);
786 		high = VIAPM_INB(SMBHDATA1);
787 
788 		*word = ((high & 0xff) << 8) | (low & 0xff);
789 	}
790 
791 	VIAPM_DEBUG(kprintf("viapm: READW from 0x%x, cmd=0x%x, word=0x%x, error=0x%x\n", slave, cmd, *word, error));
792 
793 	return (error);
794 }
795 
796 static int
797 viasmb_bwrite(device_t dev, u_char slave, char cmd, u_char count, char *buf)
798 {
799 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
800 	u_char i;
801 	int error;
802 
803 	if (count < 1 || count > 32)
804 		return (SMB_EINVAL);
805 
806 	viapm_clear(viapm);
807 	if (viapm_busy(viapm))
808 		return (SMB_EBUSY);
809 
810 	VIAPM_OUTB(SMBHADDR, slave & ~LSB);
811 	VIAPM_OUTB(SMBHCMD, cmd);
812 	VIAPM_OUTB(SMBHDATA0, count);
813 	i = VIAPM_INB(SMBHCTRL);
814 
815 	/* fill the 32-byte internal buffer */
816 	for (i = 0; i < count; i++) {
817 		VIAPM_OUTB(SMBHBLOCK, buf[i]);
818 		DELAY(2);
819 	}
820 	VIAPM_OUTB(SMBHCMD, cmd);
821 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_BLOCK);
822 
823 	error = viapm_wait(viapm);
824 
825 	VIAPM_DEBUG(kprintf("viapm: WRITEBLK to 0x%x, count=0x%x, cmd=0x%x, error=0x%x", slave, count, cmd, error));
826 
827 	return (error);
828 
829 }
830 
831 static int
832 viasmb_bread(device_t dev, u_char slave, char cmd, u_char *count, char *buf)
833 {
834 	struct viapm_softc *viapm = (struct viapm_softc *)device_get_softc(dev);
835 	u_char data, len, i;
836 	int error;
837 
838 	if (*count < 1 || *count > 32)
839 		return (SMB_EINVAL);
840 
841 	viapm_clear(viapm);
842 	if (viapm_busy(viapm))
843 		return (SMB_EBUSY);
844 
845 	VIAPM_OUTB(SMBHADDR, slave | LSB);
846 	VIAPM_OUTB(SMBHCMD, cmd);
847 	VIAPM_OUTB(SMBHCTRL, SMBHCTRL_START | SMBHCTRL_BLOCK);
848 
849 	if ((error = viapm_wait(viapm)) != SMB_ENOERR)
850 		goto error;
851 
852 	len = VIAPM_INB(SMBHDATA0);
853 	i = VIAPM_INB(SMBHCTRL); 		/* reset counter */
854 
855 	/* read the 32-byte internal buffer */
856 	for (i = 0; i < len; i++) {
857 		data = VIAPM_INB(SMBHBLOCK);
858 		if (i < *count)
859 			buf[i] = data;
860 		DELAY(2);
861 	}
862 	*count = len;
863 
864 error:
865 	VIAPM_DEBUG(kprintf("viapm: READBLK to 0x%x, count=0x%x, cmd=0x%x, error=0x%x", slave, *count, cmd, error));
866 
867 	return (error);
868 }
869 
870 static device_method_t viapm_methods[] = {
871 	/* device interface */
872 	DEVMETHOD(device_probe,		viapm_586b_probe),
873 	DEVMETHOD(device_attach,	viapm_586b_attach),
874 	DEVMETHOD(device_detach,	viapm_586b_detach),
875 
876 	/* iicbb interface */
877 	DEVMETHOD(iicbb_callback,	viabb_callback),
878 	DEVMETHOD(iicbb_setscl,		viabb_setscl),
879 	DEVMETHOD(iicbb_setsda,		viabb_setsda),
880 	DEVMETHOD(iicbb_getscl,		viabb_getscl),
881 	DEVMETHOD(iicbb_getsda,		viabb_getsda),
882 	DEVMETHOD(iicbb_reset,		viabb_reset),
883 
884 	/* Bus interface */
885 	DEVMETHOD(bus_print_child,	bus_generic_print_child),
886 	DEVMETHOD(bus_alloc_resource,	bus_generic_alloc_resource),
887 	DEVMETHOD(bus_release_resource,	bus_generic_release_resource),
888 	DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
889 	DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
890 	DEVMETHOD(bus_setup_intr,	bus_generic_setup_intr),
891 	DEVMETHOD(bus_teardown_intr,	bus_generic_teardown_intr),
892 
893 	DEVMETHOD_END
894 };
895 
896 static driver_t viapm_driver = {
897 	"viapm",
898 	viapm_methods,
899 	sizeof(struct viapm_softc),
900 };
901 
902 static device_method_t viapropm_methods[] = {
903 	/* device interface */
904 	DEVMETHOD(device_probe,		viapm_pro_probe),
905 	DEVMETHOD(device_attach,	viapm_pro_attach),
906 	DEVMETHOD(device_detach,	viapm_pro_detach),
907 
908 	/* smbus interface */
909 	DEVMETHOD(smbus_callback,	viasmb_callback),
910 	DEVMETHOD(smbus_quick,		viasmb_quick),
911 	DEVMETHOD(smbus_sendb,		viasmb_sendb),
912 	DEVMETHOD(smbus_recvb,		viasmb_recvb),
913 	DEVMETHOD(smbus_writeb,		viasmb_writeb),
914 	DEVMETHOD(smbus_readb,		viasmb_readb),
915 	DEVMETHOD(smbus_writew,		viasmb_writew),
916 	DEVMETHOD(smbus_readw,		viasmb_readw),
917 	DEVMETHOD(smbus_bwrite,		viasmb_bwrite),
918 	DEVMETHOD(smbus_bread,		viasmb_bread),
919 
920 	/* Bus interface */
921 	DEVMETHOD(bus_print_child,	bus_generic_print_child),
922 	DEVMETHOD(bus_alloc_resource,	bus_generic_alloc_resource),
923 	DEVMETHOD(bus_release_resource,	bus_generic_release_resource),
924 	DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
925 	DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
926 	DEVMETHOD(bus_setup_intr,	bus_generic_setup_intr),
927 	DEVMETHOD(bus_teardown_intr,	bus_generic_teardown_intr),
928 
929 	DEVMETHOD_END
930 };
931 
932 static driver_t viapropm_driver = {
933 	"viapropm",
934 	viapropm_methods,
935 	sizeof(struct viapm_softc),
936 };
937 
938 DECLARE_DUMMY_MODULE(viapm);
939 DRIVER_MODULE(viapm, pci, viapm_driver, viapm_devclass, NULL, NULL);
940 DRIVER_MODULE(viapropm, pci, viapropm_driver, viapropm_devclass, NULL, NULL);
941 DRIVER_MODULE(smbus, viapropm, smbus_driver, smbus_devclass, NULL, NULL);
942 
943 MODULE_DEPEND(viapm, pci, 1, 1, 1);
944 MODULE_DEPEND(viapropm, pci, 1, 1, 1);
945 MODULE_DEPEND(viapm, iicbb, IICBB_MINVER, IICBB_PREFVER, IICBB_MAXVER);
946 MODULE_DEPEND(viapropm, smbus, SMBUS_MINVER, SMBUS_PREFVER, SMBUS_MAXVER);
947 MODULE_VERSION(viapm, 1);
948