1 /*- 2 * Copyright (c) 1999,2000 Michael Smith 3 * Copyright (c) 2000 BSDi 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * Copyright (c) 2002 Eric Moore 28 * Copyright (c) 2002 LSI Logic Corporation 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 1. Redistributions of source code must retain the above copyright 35 * notice, this list of conditions and the following disclaimer. 36 * 2. Redistributions in binary form must reproduce the above copyright 37 * notice, this list of conditions and the following disclaimer in the 38 * documentation and/or other materials provided with the distribution. 39 * 3. The party using or redistributing the source code and binary forms 40 * agrees to the disclaimer below and the terms and conditions set forth 41 * herein. 42 * 43 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 44 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 45 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 46 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 47 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 48 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 49 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 50 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 51 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 52 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 53 * SUCH DAMAGE. 54 * 55 * $FreeBSD: src/sys/dev/amr/amrreg.h,v 1.1.2.4 2002/11/11 13:19:10 emoore Exp $ 56 * $DragonFly: src/sys/dev/raid/amr/amrreg.h,v 1.2 2003/06/17 04:28:22 dillon Exp $ 57 */ 58 59 /******************************************************************************** 60 ******************************************************************************** 61 Driver parameters 62 ******************************************************************************** 63 ********************************************************************************/ 64 65 /* 66 * We could actually use all 17 segments, but using only 16 means that 67 * each scatter/gather map is 128 bytes in size, and thus we don't have to worry about 68 * maps crossing page boundaries. 69 * 70 * The AMI documentation says that the limit is 26. Unfortunately, there's no way to 71 * cleanly fit more than 16 entries in without a page boundary. But is this a concern, 72 * since we allocate the s/g maps contiguously anyway? 73 */ 74 /* 75 * emoore - Oct 21, 2002 76 * firmware doesn't have sglist boundary restrictions. 77 * The sgelem can be set to 26 78 */ 79 #define AMR_NSEG 26 80 81 #define AMR_MAXCMD 255 /* ident = 0 not allowed */ 82 #define AMR_LIMITCMD 120 /* maximum count of outstanding commands */ 83 #define AMR_MAXLD 40 84 85 #define AMR_MAX_CHANNELS 4 86 #define AMR_MAX_TARGETS 15 87 #define AMR_MAX_LUNS 7 88 #define AMR_MAX_SCSI_CMDS (15 * AMR_MAX_CHANNELS) /* one for every target? */ 89 90 #define AMR_MAX_CDB_LEN 0x0a 91 #define AMR_MAX_EXTCDB_LEN 0x10 92 #define AMR_MAX_REQ_SENSE_LEN 0x20 93 94 #define AMR_BLKSIZE 512 /* constant for all controllers */ 95 96 /* 97 * Perform at-startup board initialisation. 98 * At this point in time, this code doesn't work correctly, so leave it disabled. 99 */ 100 /*#define AMR_BOARD_INIT*/ 101 102 /******************************************************************************** 103 ******************************************************************************** 104 Interface Magic Numbers 105 ******************************************************************************** 106 ********************************************************************************/ 107 108 /* 109 * Mailbox commands 110 */ 111 #define AMR_CMD_LREAD 0x01 112 #define AMR_CMD_LWRITE 0x02 113 #define AMR_CMD_PASS 0x03 114 #define AMR_CMD_EXT_ENQUIRY 0x04 115 #define AMR_CMD_ENQUIRY 0x05 116 #define AMR_CMD_FLUSH 0x0a 117 #define AMR_CMD_EXT_ENQUIRY2 0x0c 118 #define AMR_CONFIG_PRODINFO 0x0e 119 #define AMR_CMD_GET_MACHINEID 0x36 120 #define AMR_CMD_GET_INITIATOR 0x7d /* returns one byte */ 121 #define AMR_CMD_CONFIG 0xa1 122 #define AMR_CONFIG_PRODUCT_INFO 0x0e 123 #define AMR_CONFIG_ENQ3 0x0f 124 #define AMR_CONFIG_ENQ3_SOLICITED_NOTIFY 0x01 125 #define AMR_CONFIG_ENQ3_SOLICITED_FULL 0x02 126 #define AMR_CONFIG_ENQ3_UNSOLICITED 0x03 127 #define AMR_CMD_EXTPASS 0xe3 128 129 /* 130 * Command results 131 */ 132 #define AMR_STATUS_SUCCESS 0x00 133 #define AMR_STATUS_ABORTED 0x02 134 #define AMR_STATUS_FAILED 0x80 135 136 /* 137 * Physical/logical drive states 138 */ 139 #define AMR_DRV_CURSTATE(x) ((x) & 0x0f) 140 #define AMR_DRV_PREVSTATE(x) (((x) >> 4) & 0x0f) 141 #define AMR_DRV_OFFLINE 0x00 142 #define AMR_DRV_DEGRADED 0x01 143 #define AMR_DRV_OPTIMAL 0x02 144 #define AMR_DRV_ONLINE 0x03 145 #define AMR_DRV_FAILED 0x04 146 #define AMR_DRV_REBUILD 0x05 147 #define AMR_DRV_HOTSPARE 0x06 148 149 /* 150 * Logical drive properties 151 */ 152 #define AMR_DRV_RAID_MASK 0x0f /* RAID level 0, 1, 3, 5, etc. */ 153 #define AMR_DRV_WRITEBACK 0x10 /* write-back enabled */ 154 #define AMR_DRV_READHEAD 0x20 /* readhead policy enabled */ 155 #define AMR_DRV_ADAPTIVE 0x40 /* adaptive I/O policy enabled */ 156 157 /* 158 * Battery status 159 */ 160 #define AMR_BATT_MODULE_MISSING 0x01 161 #define AMR_BATT_LOW_VOLTAGE 0x02 162 #define AMR_BATT_TEMP_HIGH 0x04 163 #define AMR_BATT_PACK_MISSING 0x08 164 #define AMR_BATT_CHARGE_MASK 0x30 165 #define AMR_BATT_CHARGE_DONE 0x00 166 #define AMR_BATT_CHARGE_INPROG 0x10 167 #define AMR_BATT_CHARGE_FAIL 0x20 168 #define AMR_BATT_CYCLES_EXCEEDED 0x40 169 170 171 /******************************************************************************** 172 ******************************************************************************** 173 8LD Firmware Interface 174 ******************************************************************************** 175 ********************************************************************************/ 176 177 /* 178 * Array constraints 179 */ 180 #define AMR_8LD_MAXDRIVES 8 181 #define AMR_8LD_MAXCHAN 5 182 #define AMR_8LD_MAXTARG 15 183 #define AMR_8LD_MAXPHYSDRIVES (AMR_8LD_MAXCHAN * AMR_8LD_MAXTARG) 184 185 /* 186 * Adapter Info structure 187 */ 188 struct amr_adapter_info 189 { 190 u_int8_t aa_maxio; 191 u_int8_t aa_rebuild_rate; 192 u_int8_t aa_maxtargchan; 193 u_int8_t aa_channels; 194 u_int8_t aa_firmware[4]; 195 u_int16_t aa_flashage; 196 u_int8_t aa_chipsetvalue; 197 u_int8_t aa_memorysize; 198 u_int8_t aa_cacheflush; 199 u_int8_t aa_bios[4]; 200 u_int8_t aa_boardtype; 201 u_int8_t aa_scsisensealert; 202 u_int8_t aa_writeconfigcount; 203 u_int8_t aa_driveinsertioncount; 204 u_int8_t aa_inserteddrive; 205 u_int8_t aa_batterystatus; 206 u_int8_t res1; 207 } __packed; 208 209 /* 210 * Logical Drive info structure 211 */ 212 struct amr_logdrive_info 213 { 214 u_int8_t al_numdrives; 215 u_int8_t res1[3]; 216 u_int32_t al_size[AMR_8LD_MAXDRIVES]; 217 u_int8_t al_properties[AMR_8LD_MAXDRIVES]; 218 u_int8_t al_state[AMR_8LD_MAXDRIVES]; 219 } __packed; 220 221 /* 222 * Physical Drive info structure 223 */ 224 struct amr_physdrive_info 225 { 226 u_int8_t ap_state[AMR_8LD_MAXPHYSDRIVES]; /* low nibble current state, high nibble previous state */ 227 u_int8_t ap_predictivefailure; 228 } __packed; 229 230 /* 231 * Enquiry response structure for AMR_CMD_ENQUIRY, AMR_CMD_EXT_ENQUIRY and 232 * AMR_CMD_EXT_ENQUIRY2. 233 * ENQUIRY EXT_ENQUIRY EXT_ENQUIRY2 234 */ 235 struct amr_enquiry 236 { 237 struct amr_adapter_info ae_adapter; /* X X X */ 238 struct amr_logdrive_info ae_ldrv; /* X X X */ 239 struct amr_physdrive_info ae_pdrv; /* X X X */ 240 u_int8_t ae_formatting[AMR_8LD_MAXDRIVES];/* X X */ 241 u_int8_t res1[AMR_8LD_MAXDRIVES]; /* X X */ 242 u_int32_t ae_extlen; /* X */ 243 u_int16_t ae_subsystem; /* X */ 244 u_int16_t ae_subvendor; /* X */ 245 u_int32_t ae_signature; /* X */ 246 #define AMR_SIG_431 0xfffe0001 247 #define AMR_SIG_438 0xfffd0002 248 #define AMR_SIG_762 0xfffc0003 249 #define AMR_SIG_T5 0xfffb0004 250 #define AMR_SIG_466 0xfffa0005 251 #define AMR_SIG_467 0xfff90006 252 #define AMR_SIG_T7 0xfff80007 253 #define AMR_SIG_490 0xfff70008 254 u_int8_t res2[844]; /* X */ 255 } __packed; 256 257 258 /******************************************************************************** 259 ******************************************************************************** 260 40LD Firmware Interface 261 ******************************************************************************** 262 ********************************************************************************/ 263 264 /* 265 * Array constraints 266 */ 267 #define AMR_40LD_MAXDRIVES 40 268 #define AMR_40LD_MAXCHAN 16 269 #define AMR_40LD_MAXTARG 16 270 #define AMR_40LD_MAXPHYSDRIVES 256 271 272 /* 273 * Product Info structure 274 */ 275 struct amr_prodinfo 276 { 277 u_int32_t ap_size; /* current size in bytes (not including resvd) */ 278 u_int32_t ap_configsig; /* default is 0x00282008, indicating 0x28 maximum 279 * logical drives, 0x20 maximum stripes and 0x08 280 * maximum spans */ 281 u_int8_t ap_firmware[16]; /* printable identifiers */ 282 u_int8_t ap_bios[16]; 283 u_int8_t ap_product[80]; 284 u_int8_t ap_maxio; /* maximum number of concurrent commands supported */ 285 u_int8_t ap_nschan; /* number of SCSI channels present */ 286 u_int8_t ap_fcloops; /* number of fibre loops present */ 287 u_int8_t ap_memtype; /* memory type */ 288 u_int32_t ap_signature; 289 u_int16_t ap_memsize; /* onboard memory in MB */ 290 u_int16_t ap_subsystem; /* subsystem identifier */ 291 u_int16_t ap_subvendor; /* subsystem vendor ID */ 292 u_int8_t ap_numnotifyctr; /* number of notify counters */ 293 } __packed; 294 295 /* 296 * Notify structure 297 */ 298 struct amr_notify 299 { 300 u_int32_t an_globalcounter; /* change counter */ 301 302 u_int8_t an_paramcounter; /* parameter change counter */ 303 u_int8_t an_paramid; 304 #define AMR_PARAM_REBUILD_RATE 0x01 /* value = new rebuild rate */ 305 #define AMR_PARAM_FLUSH_INTERVAL 0x02 /* value = new flush interval */ 306 #define AMR_PARAM_SENSE_ALERT 0x03 /* value = last physical drive with check condition set */ 307 #define AMR_PARAM_DRIVE_INSERTED 0x04 /* value = last physical drive inserted */ 308 #define AMR_PARAM_BATTERY_STATUS 0x05 /* value = battery status */ 309 u_int16_t an_paramval; 310 311 u_int8_t an_writeconfigcounter; /* write config occurred */ 312 u_int8_t res1[3]; 313 314 u_int8_t an_ldrvopcounter; /* logical drive operation started/completed */ 315 u_int8_t an_ldrvopid; 316 u_int8_t an_ldrvopcmd; 317 #define AMR_LDRVOP_CHECK 0x01 318 #define AMR_LDRVOP_INIT 0x02 319 #define AMR_LDRVOP_REBUILD 0x03 320 u_int8_t an_ldrvopstatus; 321 #define AMR_LDRVOP_SUCCESS 0x00 322 #define AMR_LDRVOP_FAILED 0x01 323 #define AMR_LDRVOP_ABORTED 0x02 324 #define AMR_LDRVOP_CORRECTED 0x03 325 #define AMR_LDRVOP_STARTED 0x04 326 327 u_int8_t an_ldrvstatecounter; /* logical drive state change occurred */ 328 u_int8_t an_ldrvstateid; 329 u_int8_t an_ldrvstatenew; 330 u_int8_t an_ldrvstateold; 331 332 u_int8_t an_pdrvstatecounter; /* physical drive state change occurred */ 333 u_int8_t an_pdrvstateid; 334 u_int8_t an_pdrvstatenew; 335 u_int8_t an_pdrvstateold; 336 337 u_int8_t an_pdrvfmtcounter; 338 u_int8_t an_pdrvfmtid; 339 u_int8_t an_pdrvfmtval; 340 #define AMR_FORMAT_START 0x01 341 #define AMR_FORMAT_COMPLETE 0x02 342 u_int8_t res2; 343 344 u_int8_t an_targxfercounter; /* scsi xfer rate change */ 345 u_int8_t an_targxferid; 346 u_int8_t an_targxferval; 347 u_int8_t res3; 348 349 u_int8_t an_fcloopidcounter; /* FC/AL loop ID changed */ 350 u_int8_t an_fcloopidpdrvid; 351 u_int8_t an_fcloopid0; 352 u_int8_t an_fcloopid1; 353 354 u_int8_t an_fcloopstatecounter; /* FC/AL loop status changed */ 355 u_int8_t an_fcloopstate0; 356 u_int8_t an_fcloopstate1; 357 u_int8_t res4; 358 } __packed; 359 360 /* 361 * Enquiry3 structure 362 */ 363 struct amr_enquiry3 364 { 365 u_int32_t ae_datasize; /* valid data size in this structure */ 366 union { /* event notify structure */ 367 struct amr_notify n; 368 u_int8_t pad[0x80]; 369 } ae_notify; 370 u_int8_t ae_rebuildrate; /* current rebuild rate in % */ 371 u_int8_t ae_cacheflush; /* flush interval in seconds */ 372 u_int8_t ae_sensealert; 373 u_int8_t ae_driveinsertcount; /* count of inserted drives */ 374 u_int8_t ae_batterystatus; 375 u_int8_t ae_numldrives; 376 u_int8_t ae_reconstate[AMR_40LD_MAXDRIVES / 8]; /* reconstruction state */ 377 u_int16_t ae_opstatus[AMR_40LD_MAXDRIVES / 8]; /* operation status per drive */ 378 u_int32_t ae_drivesize[AMR_40LD_MAXDRIVES]; /* logical drive size */ 379 u_int8_t ae_driveprop[AMR_40LD_MAXDRIVES]; /* logical drive properties */ 380 u_int8_t ae_drivestate[AMR_40LD_MAXDRIVES]; /* physical drive state */ 381 u_int16_t ae_driveformat[AMR_40LD_MAXPHYSDRIVES]; 382 u_int8_t ae_targxfer[80]; /* physical drive transfer rates */ 383 384 u_int8_t res1[263]; /* pad to 1024 bytes */ 385 } __packed; 386 387 388 /******************************************************************************** 389 ******************************************************************************** 390 Mailbox and Command Structures 391 ******************************************************************************** 392 ********************************************************************************/ 393 394 #define AMR_MBOX_CMDSIZE 0x10 /* portion worth copying for controller */ 395 396 struct amr_mailbox 397 { 398 u_int8_t mb_command; 399 u_int8_t mb_ident; 400 u_int16_t mb_blkcount; 401 u_int32_t mb_lba; 402 u_int32_t mb_physaddr; 403 u_int8_t mb_drive; 404 u_int8_t mb_nsgelem; 405 u_int8_t res1; 406 u_int8_t mb_busy; 407 u_int8_t mb_nstatus; 408 u_int8_t mb_status; 409 u_int8_t mb_completed[46]; 410 u_int8_t mb_poll; 411 u_int8_t mb_ack; 412 u_int8_t res2[16]; 413 } __packed; 414 415 struct amr_mailbox64 416 { 417 u_int32_t mb64_segment; /* for 64-bit controllers */ 418 struct amr_mailbox mb; 419 } __packed; 420 421 struct amr_mailbox_ioctl 422 { 423 u_int8_t mb_command; 424 u_int8_t mb_ident; 425 u_int8_t mb_channel; 426 u_int8_t mb_param; 427 u_int8_t mb_pad[4]; 428 u_int32_t mb_physaddr; 429 u_int8_t mb_drive; 430 u_int8_t mb_nsgelem; 431 u_int8_t res1; 432 u_int8_t mb_busy; 433 u_int8_t mb_nstatus; 434 u_int8_t mb_completed[46]; 435 u_int8_t mb_poll; 436 u_int8_t mb_ack; 437 u_int8_t res4[16]; 438 } __packed; 439 440 struct amr_sgentry 441 { 442 u_int32_t sg_addr; 443 u_int32_t sg_count; 444 } __packed; 445 446 struct amr_passthrough 447 { 448 u_int8_t ap_timeout:3; 449 u_int8_t ap_ars:1; 450 u_int8_t ap_dummy:3; 451 u_int8_t ap_islogical:1; 452 u_int8_t ap_logical_drive_no; 453 u_int8_t ap_channel; 454 u_int8_t ap_scsi_id; 455 u_int8_t ap_queue_tag; 456 u_int8_t ap_queue_action; 457 u_int8_t ap_cdb[AMR_MAX_CDB_LEN]; 458 u_int8_t ap_cdb_length; 459 u_int8_t ap_request_sense_length; 460 u_int8_t ap_request_sense_area[AMR_MAX_REQ_SENSE_LEN]; 461 u_int8_t ap_no_sg_elements; 462 u_int8_t ap_scsi_status; 463 u_int32_t ap_data_transfer_address; 464 u_int32_t ap_data_transfer_length; 465 } __packed; 466 467 struct amr_ext_passthrough 468 { 469 u_int8_t ap_timeout:3; 470 u_int8_t ap_ars:1; 471 u_int8_t ap_rsvd1:1; 472 u_int8_t ap_cd_rom:1; 473 u_int8_t ap_rsvd2:1; 474 u_int8_t ap_islogical:1; 475 u_int8_t ap_logical_drive_no; 476 u_int8_t ap_channel; 477 u_int8_t ap_scsi_id; 478 u_int8_t ap_queue_tag; 479 u_int8_t ap_queue_action; 480 u_int8_t ap_cdb_length; 481 u_int8_t ap_rsvd3; 482 u_int8_t ap_cdb[AMR_MAX_EXTCDB_LEN]; 483 u_int8_t ap_no_sg_elements; 484 u_int8_t ap_scsi_status; 485 u_int8_t ap_request_sense_length; 486 u_int8_t ap_request_sense_area[AMR_MAX_REQ_SENSE_LEN]; 487 u_int8_t ap_rsvd4; 488 u_int32_t ap_data_transfer_address; 489 u_int32_t ap_data_transfer_length; 490 } __packed; 491 492 #ifdef _KERNEL 493 /******************************************************************************** 494 ******************************************************************************** 495 "Quartz" i960 PCI bridge interface 496 ******************************************************************************** 497 ********************************************************************************/ 498 499 #define AMR_CFG_SIG 0xa0 /* PCI config register for signature */ 500 #define AMR_SIGNATURE_1 0xCCCC /* i960 signature (older adapters) */ 501 #define AMR_SIGNATURE_2 0x3344 /* i960 signature (newer adapters) */ 502 503 /* 504 * Doorbell registers 505 */ 506 #define AMR_QIDB 0x20 507 #define AMR_QODB 0x2c 508 #define AMR_QIDB_SUBMIT 0x00000001 /* mailbox ready for work */ 509 #define AMR_QIDB_ACK 0x00000002 /* mailbox done */ 510 #define AMR_QODB_READY 0x10001234 /* work ready to be processed */ 511 512 /* 513 * Initialisation status 514 */ 515 #define AMR_QINIT_SCAN 0x01 /* init scanning drives */ 516 #define AMR_QINIT_SCANINIT 0x02 /* init scanning initialising */ 517 #define AMR_QINIT_FIRMWARE 0x03 /* init firmware initing */ 518 #define AMR_QINIT_INPROG 0xdc /* init in progress */ 519 #define AMR_QINIT_SPINUP 0x2c /* init spinning drives */ 520 #define AMR_QINIT_NOMEM 0xac /* insufficient memory */ 521 #define AMR_QINIT_CACHEFLUSH 0xbc /* init flushing cache */ 522 #define AMR_QINIT_DONE 0x9c /* init successfully done */ 523 524 /* 525 * I/O primitives 526 */ 527 #define AMR_QPUT_IDB(sc, val) bus_space_write_4(sc->amr_btag, sc->amr_bhandle, AMR_QIDB, val) 528 #define AMR_QGET_IDB(sc) bus_space_read_4 (sc->amr_btag, sc->amr_bhandle, AMR_QIDB) 529 #define AMR_QPUT_ODB(sc, val) bus_space_write_4(sc->amr_btag, sc->amr_bhandle, AMR_QODB, val) 530 #define AMR_QGET_ODB(sc) bus_space_read_4 (sc->amr_btag, sc->amr_bhandle, AMR_QODB) 531 532 #ifdef AMR_BOARD_INIT 533 #define AMR_QRESET(sc) \ 534 do { \ 535 pci_write_config((sc)->amr_dev, 0x40, pci_read_config((sc)->amr_dev, 0x40, 1) | 0x20, 1); \ 536 pci_write_config((sc)->amr_dev, 0x64, 0x1122, 1); \ 537 } while (0) 538 #define AMR_QGET_INITSTATUS(sc) pci_read_config((sc)->amr_dev, 0x9c, 1) 539 #define AMR_QGET_INITCHAN(sc) pci_read_config((sc)->amr_dev, 0x9f, 1) 540 #define AMR_QGET_INITTARG(sc) pci_read_config((sc)->amr_dev, 0x9e, 1) 541 #endif 542 543 /******************************************************************************** 544 ******************************************************************************** 545 "Standard" old-style ASIC bridge interface 546 ******************************************************************************** 547 ********************************************************************************/ 548 549 /* 550 * I/O registers 551 */ 552 #define AMR_SCMD 0x10 /* command/ack register (write) */ 553 #define AMR_SMBOX_BUSY 0x10 /* mailbox status (read) */ 554 #define AMR_STOGGLE 0x11 /* interrupt enable bit here */ 555 #define AMR_SMBOX_0 0x14 /* mailbox physical address low byte */ 556 #define AMR_SMBOX_1 0x15 557 #define AMR_SMBOX_2 0x16 558 #define AMR_SMBOX_3 0x17 /* high byte */ 559 #define AMR_SMBOX_ENABLE 0x18 /* atomic mailbox address enable */ 560 #define AMR_SINTR 0x1a /* interrupt status */ 561 562 /* 563 * I/O magic numbers 564 */ 565 #define AMR_SCMD_POST 0x10 /* -> SCMD to initiate action on mailbox */ 566 #define AMR_SCMD_ACKINTR 0x08 /* -> SCMD to ack mailbox retrieved */ 567 #define AMR_STOGL_IENABLE 0xc0 /* in STOGGLE */ 568 #define AMR_SINTR_VALID 0x40 /* in SINTR */ 569 #define AMR_SMBOX_BUSYFLAG 0x10 /* in SMBOX_BUSY */ 570 #define AMR_SMBOX_ADDR 0x00 /* -> SMBOX_ENABLE */ 571 572 /* 573 * Initialisation status 574 */ 575 #define AMR_SINIT_ABEND 0xee /* init abnormal terminated */ 576 #define AMR_SINIT_NOMEM 0xca /* insufficient memory */ 577 #define AMR_SINIT_CACHEFLUSH 0xbb /* firmware flushing cache */ 578 #define AMR_SINIT_INPROG 0x11 /* init in progress */ 579 #define AMR_SINIT_SPINUP 0x22 /* firmware spinning drives */ 580 #define AMR_SINIT_DONE 0x99 /* init successfully done */ 581 582 /* 583 * I/O primitives 584 */ 585 #define AMR_SPUT_ISTAT(sc, val) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SINTR, val) 586 #define AMR_SGET_ISTAT(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SINTR) 587 #define AMR_SACK_INTERRUPT(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SCMD, AMR_SCMD_ACKINTR) 588 #define AMR_SPOST_COMMAND(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SCMD, AMR_SCMD_POST) 589 #define AMR_SGET_MBSTAT(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_BUSY) 590 #define AMR_SENABLE_INTR(sc) \ 591 bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE, \ 592 bus_space_read_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE) | AMR_STOGL_IENABLE) 593 #define AMR_SDISABLE_INTR(sc) \ 594 bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE, \ 595 bus_space_read_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE) & ~AMR_STOGL_IENABLE) 596 #define AMR_SBYTE_SET(sc, reg, val) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, reg, val) 597 598 #ifdef AMR_BOARD_INIT 599 #define AMR_SRESET(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, 0, 0x80) 600 #define AMR_SGET_INITSTATUS(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE) 601 #define AMR_SGET_FAILDRIVE(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 1) 602 #define AMR_SGET_INITCHAN(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 2) 603 #define AMR_SGET_INITTARG(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 3) 604 #endif 605 606 #endif /* _KERNEL */ 607