1 /* 2 * Copyright (c) 1997 by Simon Shapiro 3 * All Rights Reserved 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 */ 30 31 /* 32 * 33 * dpt.h: Definitions and constants used by the SCSI side of the DPT 34 * 35 * credits: Mike Neuffer; DPT low level code and in other areas as well. 36 * Mark Salyzyn; Many vital bits of info and diagnostics. 37 * Justin Gibbs; FreeBSD API, debugging and style 38 * Ron McDaniels; SCSI Software Interrupts 39 * FreeBSD.ORG; Great O/S to work on and for. 40 */ 41 42 43 #ident "$FreeBSD: src/sys/dev/dpt/dpt.h,v 1.8.2.1 2000/08/07 18:48:14 peter Exp $" 44 #ident "$DragonFly: src/sys/dev/raid/dpt/dpt.h,v 1.4 2004/02/16 20:13:26 dillon Exp $" 45 46 #ifndef _DPT_H 47 #define _DPT_H 48 49 #include <sys/ioccom.h> 50 51 #define DPT_CDEV_MAJOR 88 52 53 #undef DPT_USE_DLM_SWI 54 55 extern u_long dpt_unit; 56 57 #define DPT_RELEASE 1 58 #define DPT_VERSION 4 59 #define DPT_PATCH 5 60 #define DPT_MONTH 8 61 #define DPT_DAY 3 62 #define DPT_YEAR 18 /* 1998 - 1980 */ 63 64 #define DPT_CTL_RELEASE 1 65 #define DPT_CTL_VERSION 0 66 #define DPT_CTL_PATCH 6 67 68 #ifndef PAGESIZ 69 #define PAGESIZ 4096 70 #endif 71 72 #ifndef physaddr 73 typedef void *physaddr; 74 #endif 75 76 #undef DPT_INQUIRE_DEVICES /* We have no buyers for this function */ 77 #define DPT_SUPPORT_POLLING /* Use polled mode at boot (must be ON!) */ 78 #define DPT_OPENNINGS 8 /* Commands-in-progress per device */ 79 80 #define DPT_RETRIES 5 /* Times to retry failed commands */ 81 #undef DPT_DISABLE_SG 82 #define DPT_HAS_OPEN 83 84 /* Arguments to dpt_run_queue() can be: */ 85 86 #define DPT_MAX_TARGET_MODE_BUFFER_SIZE 8192 87 #define DPT_FREE_LIST_INCREMENT 64 88 #define DPT_CMD_LEN 12 89 90 /* 91 * How many segments do we want in a Scatter/Gather list? 92 * Some HBA's can do 16, Some 8192. Since we pre-allocate 93 * them in fixed increments, we need to put a practical limit on 94 * these. A passed parameter (from kernel boot or lkm) would help 95 */ 96 #define DPT_MAX_SEGS 32 97 98 /* Debug levels */ 99 100 #undef DPT_DEBUG_PCI 101 #undef DPT_DEBUG_INIT 102 #undef DPT_DEBUG_SETUP 103 #undef DPT_DEBUG_STATES 104 #undef DPT_DEBUG_CONFIG 105 #undef DPT_DEBUG_QUEUES 106 #undef DPT_DEBUG_SCSI_CMD 107 #undef DPT_DEBUG_SOFTINTR 108 #undef DPT_DEBUG_HARDINTR 109 #undef DPT_DEBUG_HEX_DUMPS 110 #undef DPT_DEBUG_POLLING 111 #undef DPT_DEBUG_INQUIRE 112 #undef DPT_DEBUG_COMPLETION 113 #undef DPT_DEBUG_COMPLETION_ERRORS 114 #define DPT_DEBUG_MINPHYS 115 #undef DPT_DEBUG_SG 116 #undef DPT_DEBUG_SG_SHOW_DATA 117 #undef DPT_DEBUG_SCSI_CMD_NAME 118 #undef DPT_DEBUG_CONTROL 119 #undef DPT_DEBUG_TIMEOUTS 120 #undef DPT_DEBUG_SHUTDOWN 121 #define DPT_DEBUG_USER_CMD 122 123 /* 124 * Misc. definitions 125 */ 126 #undef TRUE 127 #undef FALSE 128 #define TRUE 1 129 #define FALSE 0 130 131 #define MAX_CHANNELS 3 132 #define MAX_TARGETS 16 133 #define MAX_LUNS 8 134 135 /* Map minor numbers to device identity */ 136 #define TARGET_MASK 0x000f 137 #define BUS_MASK 0x0030 138 #define HBA_MASK 0x01c0 139 #define LUN_MASK 0x0e00 140 141 #define minor2target(minor) ( minor & TARGET_MASK ) 142 #define minor2bus(minor) ( (minor & BUS_MASK) >> 4 ) 143 #define minor2hba(minor) ( (minor & HBA_MASK) >> 6 ) 144 #define minor2lun(minor) ( (minor & LUN_MASK) >> 9 ) 145 146 /* 147 * Valid values for cache_type 148 */ 149 #define DPT_NO_CACHE 0 150 #define DPT_CACHE_WRITETHROUGH 1 151 #define DPT_CACHE_WRITEBACK -2 152 153 #define min(a,b) ((a<b)?(a):(b)) 154 155 #define MAXISA 4 156 #define MAXEISA 16 157 #define MAXPCI 16 158 #define MAXIRQ 16 159 #define MAXTARGET 16 160 161 #define IS_ISA 'I' 162 #define IS_EISA 'E' 163 #define IS_PCI 'P' 164 165 #define BROKEN_INQUIRY 1 166 167 #define BUSMASTER 0xff 168 #define PIO 0xfe 169 170 #define EATA_SIGNATURE 0x41544145 /* little ENDIAN "EATA" */ 171 #define DPT_BLINK_INDICATOR 0x42445054 172 173 #define DPT_ID1 0x12 174 #define DPT_ID2 0x1 175 #define ATT_ID1 0x06 176 #define ATT_ID2 0x94 177 #define ATT_ID3 0x0 178 179 #define NEC_ID1 0x38 180 #define NEC_ID2 0xa3 181 #define NEC_ID3 0x82 182 183 #define MAX_PCI_DEVICES 32 /* Maximum # Of Devices Per Bus */ 184 #define MAX_METHOD_2 16 /* Max Devices For Method 2 */ 185 #define MAX_PCI_BUS 16 /* Maximum # Of Busses Allowed */ 186 187 #define DPT_MAX_RETRIES 2 188 189 #define READ 0 190 #define WRITE 1 191 #define OTHER 2 192 193 #define HD(cmd) ((hostdata *)&(cmd->host->hostdata)) 194 #define CD(cmd) ((struct eata_ccb *)(cmd->host_scribble)) 195 #define SD(host) ((hostdata *)&(host->hostdata)) 196 197 /* 198 * EATA Command & Register definitions 199 */ 200 201 #define PCI_REG_DPTconfig 0x40 202 #define PCI_REG_PumpModeAddress 0x44 203 #define PCI_REG_PumpModeData 0x48 204 #define PCI_REG_ConfigParam1 0x50 205 #define PCI_REG_ConfigParam2 0x54 206 207 #define EATA_CMD_PIO_SETUPTEST 0xc6 208 #define EATA_CMD_PIO_READ_CONFIG 0xf0 209 #define EATA_CMD_PIO_SET_CONFIG 0xf1 210 #define EATA_CMD_PIO_SEND_CP 0xf2 211 #define EATA_CMD_PIO_RECEIVE_SP 0xf3 212 #define EATA_CMD_PIO_TRUNC 0xf4 213 214 #define EATA_CMD_RESET 0xf9 215 #define EATA_COLD_BOOT 0x06 /* Last resort only! */ 216 217 #define EATA_CMD_IMMEDIATE 0xfa 218 219 #define EATA_CMD_DMA_READ_CONFIG 0xfd 220 #define EATA_CMD_DMA_SET_CONFIG 0xfe 221 #define EATA_CMD_DMA_SEND_CP 0xff 222 223 #define ECS_EMULATE_SENSE 0xd4 224 225 /* 226 * Immediate Commands 227 * Beware of this enumeration. Not all commands are in sequence! 228 */ 229 230 enum dpt_immediate_cmd { 231 EATA_GENERIC_ABORT, 232 EATA_SPECIFIC_RESET, 233 EATA_BUS_RESET, 234 EATA_SPECIFIC_ABORT, 235 EATA_QUIET_INTR, 236 EATA_SMART_ROM_DL_EN, 237 EATA_COLD_BOOT_HBA, /* Only as a last resort */ 238 EATA_FORCE_IO, 239 EATA_SCSI_BUS_OFFLINE, 240 EATA_RESET_MASKED_BUS, 241 EATA_POWER_OFF_WARN 242 }; 243 244 extern enum dpt_immediate_cmd dpt_immediate_cmd; 245 246 #define HA_CTRLREG 0x206 /* control register for HBA */ 247 #define HA_CTRL_DISINT 0x02 /* CTRLREG: disable interrupts */ 248 #define HA_CTRL_RESCPU 0x04 /* CTRLREG: reset processo */ 249 #define HA_CTRL_8HEADS 0x08 /* 250 * CTRLREG: set for drives with 251 * >=8 heads 252 * (WD1003 rudimentary :-) 253 */ 254 255 #define HA_WCOMMAND 0x07 /* command register offset */ 256 #define HA_WIFC 0x06 /* immediate command offset */ 257 #define HA_WCODE 0x05 258 #define HA_WCODE2 0x04 259 #define HA_WDMAADDR 0x02 /* DMA address LSB offset */ 260 #define HA_RERROR 0x01 /* Error Register, offset 1 from base */ 261 #define HA_RAUXSTAT 0x08 /* aux status register offset */ 262 #define HA_RSTATUS 0x07 /* status register offset */ 263 #define HA_RDATA 0x00 /* data register (16bit) */ 264 #define HA_WDATA 0x00 /* data register (16bit) */ 265 266 #define HA_ABUSY 0x01 /* aux busy bit */ 267 #define HA_AIRQ 0x02 /* aux IRQ pending bit */ 268 #define HA_SERROR 0x01 /* pr. command ended in error */ 269 #define HA_SMORE 0x02 /* more data soon to come */ 270 #define HA_SCORR 0x04 /* datio_addra corrected */ 271 #define HA_SDRQ 0x08 /* data request active */ 272 #define HA_SSC 0x10 /* seek complete */ 273 #define HA_SFAULT 0x20 /* write fault */ 274 #define HA_SREADY 0x40 /* drive ready */ 275 #define HA_SBUSY 0x80 /* drive busy */ 276 #define HA_SDRDY (HA_SSC|HA_SREADY|HA_SDRQ) 277 278 /* 279 * Message definitions 280 */ 281 282 enum dpt_message { 283 HA_NO_ERROR, /* No Error */ 284 HA_ERR_SEL_TO, /* Selection Timeout */ 285 HA_ERR_CMD_TO, /* Command Timeout */ 286 HA_SCSIBUS_RESET, 287 HA_HBA_POWER_UP, /* Initial Controller Power-up */ 288 HA_UNX_BUSPHASE, /* Unexpected Bus Phase */ 289 HA_UNX_BUS_FREE, /* Unexpected Bus Free */ 290 HA_BUS_PARITY, /* Bus Parity Error */ 291 HA_SCSI_HUNG, /* SCSI Hung */ 292 HA_UNX_MSGRJCT, /* Unexpected Message Rejected */ 293 HA_RESET_STUCK, /* SCSI Bus Reset Stuck */ 294 HA_RSENSE_FAIL, /* Auto Request-Sense Failed */ 295 HA_PARITY_ERR, /* Controller Ram Parity Error */ 296 HA_CP_ABORT_NA, /* Abort Message sent to non-active cmd */ 297 HA_CP_ABORTED, /* Abort Message sent to active cmd */ 298 HA_CP_RESET_NA, /* Reset Message sent to non-active cmd */ 299 HA_CP_RESET, /* Reset Message sent to active cmd */ 300 HA_ECC_ERR, /* Controller Ram ECC Error */ 301 HA_PCI_PARITY, /* PCI Parity Error */ 302 HA_PCI_MABORT, /* PCI Master Abort */ 303 HA_PCI_TABORT, /* PCI Target Abort */ 304 HA_PCI_STABORT /* PCI Signaled Target Abort */ 305 }; 306 307 extern enum dpt_message dpt_message; 308 309 #define HA_STATUS_MASK 0x7F 310 #define HA_IDENTIFY_MSG 0x80 311 #define HA_DISCO_RECO 0x40 /* Disconnect/Reconnect */ 312 313 #define DPT_RW_BUFF_HEART 0X00 314 #define DPT_RW_BUFF_DLM 0x02 315 #define DPT_RW_BUFF_ACCESS 0x03 316 317 #define HA_INTR_OFF 1 318 #define HA_INTR_ON 0 319 320 /* This is really a one-time shot through some black magic */ 321 #define DPT_EATA_REVA 0x1c 322 #define DPT_EATA_REVB 0x1e 323 #define DPT_EATA_REVC 0x22 324 #define DPT_EATA_REVZ 0x24 325 326 327 /* IOCTL List */ 328 329 #define DPT_RW_CMD_LEN 32 330 #define DPT_RW_CMD_DUMP_SOFTC "dump softc" 331 #define DPT_RW_CMD_DUMP_SYSINFO "dump sysinfo" 332 #define DPT_RW_CMD_DUMP_METRICS "dump metrics" 333 #define DPT_RW_CMD_CLEAR_METRICS "clear metrics" 334 #define DPT_RW_CMD_SHOW_LED "show LED" 335 336 #define DPT_IOCTL_INTERNAL_METRICS _IOR('D', 1, dpt_perf_t) 337 #define DPT_IOCTL_SOFTC _IOR('D', 2, dpt_user_softc_t) 338 #define DPT_IOCTL_SEND _IOWR('D', 3, eata_pt_t) 339 #define SDI_SEND 0x40044444 /* Observed from dptmgr */ 340 341 /* 342 * Other definitions 343 */ 344 345 #define DPT_HCP_LENGTH(page) (ntohs(*(int16_t *)(void *)(&page[2]))+4) 346 #define DPT_HCP_FIRST(page) (&page[4]) 347 #define DPT_HCP_NEXT(param) (¶m[3 + param[3] + 1]) 348 #define DPT_HCP_CODE(param) (ntohs(*(int16_t *)(void *)param)) 349 350 351 /* Possible return values from dpt_register_buffer() */ 352 353 #define SCSI_TM_READ_BUFFER 0x3c 354 #define SCSI_TM_WRITE_BUFFER 0x3b 355 356 #define SCSI_TM_MODE_MASK 0x07 /* Strip off reserved and LUN */ 357 #define SCSI_TM_LUN_MASK 0xe0 /* Strip off reserved and LUN */ 358 359 typedef enum { 360 SUCCESSFULLY_REGISTERED, 361 DRIVER_DOWN, 362 ALREADY_REGISTERED, 363 REGISTERED_TO_ANOTHER, 364 NOT_REGISTERED, 365 INVALID_UNIT, 366 INVALID_SENDER, 367 INVALID_CALLBACK, 368 NO_RESOURCES 369 } dpt_rb_t; 370 371 typedef enum { 372 REGISTER_BUFFER, 373 RELEASE_BUFFER 374 } dpt_rb_op_t; 375 376 /* 377 * New way for completion routines to reliably copmplete processing. 378 * Should take properly typed dpt_softc_t and dpt_ccb_t, 379 * but interdependencies preclude that. 380 */ 381 typedef void (*ccb_callback)(void *dpt, int bus, void *ccb); 382 383 typedef void (*buff_wr_done)(int unit, u_int8_t channel, u_int8_t target, 384 u_int8_t lun, u_int16_t offset, u_int16_t length, 385 int result); 386 387 typedef void (*dpt_rec_buff)(int unit, u_int8_t channel, u_int8_t target, 388 u_int8_t lun, void *buffer, u_int16_t offset, 389 u_int16_t length); 390 391 /* HBA's Status port (register) bitmap */ 392 typedef struct reg_bit { /* reading this one will clear the interrupt */ 393 u_int8_t error :1, /* previous command ended in an error */ 394 more :1, /* More DATA coming soon Poll BSY & DRQ (PIO) */ 395 corr :1, /* data read was successfully corrected with ECC */ 396 drq :1, /* data request active */ 397 sc :1, /* seek complete */ 398 fault :1, /* write fault */ 399 ready :1, /* drive ready */ 400 busy :1; /* controller busy */ 401 } dpt_status_reg_t; 402 403 /* HBA's Auxiliary status port (register) bitmap */ 404 typedef struct reg_abit { /* reading this won't clear the interrupt */ 405 u_int8_t abusy :1, /* auxiliary busy */ 406 irq :1, /* set when drive interrupt is asserted */ 407 :6; 408 } dpt_aux_status_t; 409 410 /* The EATA Register Set as a structure */ 411 typedef struct eata_register { 412 u_int8_t data_reg[2]; /* R, couldn't figure this one out */ 413 u_int8_t cp_addr[4]; /* W, CP address register */ 414 union { 415 u_int8_t command; /* 416 * W, command code: 417 * [read|set] conf, send CP 418 */ 419 struct reg_bit status; /* R, see register_bit1 */ 420 u_int8_t statusbyte; 421 } ovr; 422 struct reg_abit aux_stat; /* R, see register_bit2 */ 423 } eata_reg_t; 424 425 /* 426 * Holds the results of a READ_CONFIGURATION command 427 * Beware of data items which are larger than 1 byte. 428 * these come from the DPT in network order. 429 * On an Intel ``CPU'' they will be upside down and backwards! 430 * The dpt_get_conf function is normally responsible for flipping 431 * Everything back. 432 */ 433 typedef struct get_conf { /* Read Configuration Array */ 434 union { 435 struct { 436 u_int8_t foo_DevType; 437 u_int8_t foo_PageCode; 438 u_int8_t foo_Reserved0; 439 u_int8_t foo_len; 440 } foo; 441 u_int32_t foo_length; /* Should return 0x22, 0x24, etc */ 442 } bar; 443 #define gcs_length bar.foo_length 444 #define gcs_PageCode bar.foo.foo_DevType 445 #define gcs_reserved0 bar.foo.foo_Reserved0 446 #define gcs_len bar.foo.foo_len 447 448 u_int32_t signature; /* Signature MUST be "EATA". ntohl()`ed */ 449 450 u_int8_t version2 :4, 451 version :4; /* EATA Version level */ 452 453 u_int8_t OCS_enabled :1, /* Overlap Command Support enabled */ 454 TAR_support :1, /* SCSI Target Mode supported */ 455 TRNXFR :1, /* Truncate Transfer Cmd Used in PIO Mode */ 456 MORE_support:1, /* MORE supported (PIO Mode Only) */ 457 DMA_support :1, /* DMA supported */ 458 DMA_valid :1, /* DRQ value in Byte 30 is valid */ 459 ATA :1, /* ATA device connected (not supported) */ 460 HAA_valid :1; /* Hostadapter Address is valid */ 461 462 u_int16_t cppadlen; /* 463 * Number of pad bytes send after CD data set 464 * to zero for DMA commands. Ntohl()`ed 465 */ 466 u_int8_t scsi_idS; /* SCSI ID of controller 2-0 Byte 0 res. */ 467 u_int8_t scsi_id2; /* If not, zero is returned */ 468 u_int8_t scsi_id1; 469 u_int8_t scsi_id0; 470 u_int32_t cplen; /* CP length: number of valid cp bytes */ 471 472 u_int32_t splen; /* Returned bytes for a received SP command */ 473 u_int16_t queuesiz; /* max number of queueable CPs */ 474 475 u_int16_t dummy; 476 u_int16_t SGsiz; /* max number of SG table entrie */ 477 478 u_int8_t IRQ :4,/* IRQ used this HBA */ 479 IRQ_TR :1,/* IRQ Trigger: 0=edge, 1=level */ 480 SECOND :1,/* This is a secondary controller */ 481 DMA_channel:2;/* DRQ index, DRQ is 2comp of DRQX */ 482 483 u_int8_t sync; /* 0-7 sync active bitmask (deprecated) */ 484 u_int8_t DSBLE :1, /* ISA i/o addressing is disabled */ 485 FORCADR :1, /* i/o address has been forced */ 486 SG_64K :1, 487 SG_UAE :1, 488 :4; 489 490 u_int8_t MAX_ID :5, /* Max number of SCSI target IDs */ 491 MAX_CHAN :3; /* Number of SCSI busses on HBA */ 492 493 u_int8_t MAX_LUN; /* Max number of LUNs */ 494 u_int8_t :3, 495 AUTOTRM :1, 496 M1_inst :1, 497 ID_qest :1, /* Raidnum ID is questionable */ 498 is_PCI :1, /* HBA is PCI */ 499 is_EISA :1; /* HBA is EISA */ 500 501 u_int8_t RAIDNUM; /* unique HBA identifier */ 502 u_int8_t unused[4]; /* When doing PIO, you GET 512 bytes */ 503 504 /* >>------>> End of The DPT structure <<------<< */ 505 506 u_int32_t length; /* True length, after ntohl conversion */ 507 } dpt_conf_t; 508 509 /* Scatter-Gather list entry */ 510 typedef struct dpt_sg_segment { 511 u_int32_t seg_addr; /* All fields in network byte order */ 512 u_int32_t seg_len; 513 } dpt_sg_t; 514 515 516 /* Status Packet */ 517 typedef struct eata_sp { 518 u_int8_t hba_stat :7, /* HBA status */ 519 EOC :1; /* True if command finished */ 520 521 u_int8_t scsi_stat; /* Target SCSI status */ 522 523 u_int8_t reserved[2]; 524 525 u_int32_t residue_len; /* Number of bytes not transferred */ 526 527 u_int32_t ccb_busaddr; 528 529 u_int8_t sp_ID_Message; 530 u_int8_t sp_Que_Message; 531 u_int8_t sp_Tag_Message; 532 u_int8_t msg[9]; 533 } dpt_sp_t; 534 535 /* 536 * A strange collection of O/S-Hardware releated bits and pieces. 537 * Used by the dpt_ioctl() entry point to return DPT_SYSINFO command. 538 */ 539 typedef struct dpt_drive_parameters { 540 u_int16_t cylinders; /* Up to 1024 */ 541 u_int8_t heads; /* Up to 255 */ 542 u_int8_t sectors; /* Up to 63 */ 543 } dpt_drive_t; 544 545 typedef struct driveParam_S driveParam_T; 546 547 #define SI_CMOS_Valid 0x0001 548 #define SI_NumDrivesValid 0x0002 549 #define SI_ProcessorValid 0x0004 550 #define SI_MemorySizeValid 0x0008 551 #define SI_DriveParamsValid 0x0010 552 #define SI_SmartROMverValid 0x0020 553 #define SI_OSversionValid 0x0040 554 #define SI_OSspecificValid 0x0080 555 #define SI_BusTypeValid 0x0100 556 557 #define SI_ALL_VALID 0x0FFF 558 #define SI_NO_SmartROM 0x8000 559 560 #define SI_ISA_BUS 0x00 561 #define SI_MCA_BUS 0x01 562 #define SI_EISA_BUS 0x02 563 #define SI_PCI_BUS 0x04 564 565 #define HBA_BUS_ISA 0x00 566 #define HBA_BUS_EISA 0x01 567 #define HBA_BUS_PCI 0x02 568 569 typedef struct dpt_sysinfo { 570 u_int8_t drive0CMOS; /* CMOS Drive 0 Type */ 571 u_int8_t drive1CMOS; /* CMOS Drive 1 Type */ 572 u_int8_t numDrives; /* 0040:0075 contents */ 573 u_int8_t processorFamily; /* Same as DPTSIG definition */ 574 u_int8_t processorType; /* Same as DPTSIG definition */ 575 u_int8_t smartROMMajorVersion; 576 u_int8_t smartROMMinorVersion; /* SmartROM version */ 577 u_int8_t smartROMRevision; 578 u_int16_t flags; /* See bit definitions above */ 579 u_int16_t conventionalMemSize; /* in KB */ 580 u_int32_t extendedMemSize; /* in KB */ 581 u_int32_t osType; /* Same as DPTSIG definition */ 582 u_int8_t osMajorVersion; 583 u_int8_t osMinorVersion; /* The OS version */ 584 u_int8_t osRevision; 585 u_int8_t osSubRevision; 586 u_int8_t busType; /* See defininitions above */ 587 u_int8_t pad[3]; /* For alignment */ 588 dpt_drive_t drives[16]; /* SmartROM Logical Drives */ 589 } dpt_sysinfo_t; 590 591 /* SEND_COMMAND packet structure */ 592 typedef struct eata_ccb { 593 u_int8_t SCSI_Reset :1, /* Cause a SCSI Bus reset on the cmd */ 594 HBA_Init :1, /* Cause Controller to reinitialize */ 595 Auto_Req_Sen :1, /* Do Auto Request Sense on errors */ 596 scatter :1, /* Data Ptr points to a SG Packet */ 597 Quick :1, /* Set this one for NO Status PAcket */ 598 Interpret :1, /* Interpret the SCSI cdb for own use */ 599 DataOut :1, /* Data Out phase with command */ 600 DataIn :1; /* Data In phase with command */ 601 602 u_int8_t reqlen; /* Request Sense Length, if Auto_Req_Sen=1 */ 603 u_int8_t unused[3]; 604 u_int8_t FWNEST :1, /* send cmd to phys RAID component */ 605 unused2 :7; 606 607 u_int8_t Phsunit :1, /* physical unit on mirrored pair */ 608 I_AT :1, /* inhibit address translation */ 609 Disable_Cache :1, /* HBA inhibit caching */ 610 :5; 611 612 u_int8_t cp_id :5, /* SCSI Device ID of target */ 613 cp_channel :3; /* SCSI Channel # of HBA */ 614 615 u_int8_t cp_LUN :5, 616 cp_luntar :1, /* CP is for target ROUTINE */ 617 cp_dispri :1, /* Grant disconnect privilege */ 618 cp_identify :1; /* Always TRUE */ 619 620 u_int8_t cp_msg[3]; /* Message bytes 0-3 */ 621 622 union { 623 struct { 624 u_int8_t x_scsi_cmd; /* Partial SCSI CDB def */ 625 626 u_int8_t x_extent :1, 627 x_bytchk :1, 628 x_reladr :1, 629 x_cmplst :1, 630 x_fmtdata :1, 631 x_lun :3; 632 633 u_int8_t x_page; 634 u_int8_t reserved4; 635 u_int8_t x_len; 636 u_int8_t x_link :1; 637 u_int8_t x_flag :1; 638 u_int8_t reserved5 :4; 639 u_int8_t x_vendor :2; 640 } x; 641 u_int8_t z[12]; /* Command Descriptor Block (= 12) */ 642 } cp_w; 643 644 #define cp_cdb cp_w.z 645 #define cp_scsi_cmd cp_w.x.x_scsi_cmd 646 #define cp_extent cp_w.x.x_extent 647 #define cp_lun cp_w.x.x_lun 648 #define cp_page cp_w.x.x_page 649 #define cp_len cp_w.x.x_len 650 651 #define MULTIFUNCTION_CMD 0x0e /* SCSI Multi Function Cmd */ 652 #define BUS_QUIET 0x04 /* Quite Scsi Bus Code */ 653 #define BUS_UNQUIET 0x05 /* Un Quiet Scsi Bus Code */ 654 655 u_int32_t cp_datalen; /* 656 * Data Transfer Length. If scatter=1 len (IN 657 * BYTES!) of the S/G array 658 */ 659 660 u_int32_t cp_busaddr; /* Unique identifier. Busaddr works well */ 661 u_int32_t cp_dataDMA; /* 662 * Data Address, if scatter=1 then it is the 663 * address of scatter packet 664 */ 665 u_int32_t cp_statDMA; /* address for Status Packet */ 666 u_int32_t cp_reqDMA; /* 667 * Request Sense Address, used if CP command 668 * ends with error 669 */ 670 u_int8_t CP_OpCode; 671 672 } eata_ccb_t; 673 674 /* 675 * DPT Signature Structure. 676 * Used by /dev/dpt to directly pass commands to the HBA 677 * We have more information here than we care for... 678 */ 679 680 /* Current Signature Version - sigBYTE dsSigVersion; */ 681 #define SIG_VERSION 1 682 683 /* 684 * Processor Family - sigBYTE dsProcessorFamily; DISTINCT VALUE 685 * 686 * What type of processor the file is meant to run on. 687 * This will let us know whether to read sigWORDs as high/low or low/high. 688 */ 689 #define PROC_INTEL 0x00 /* Intel 80x86 */ 690 #define PROC_MOTOROLA 0x01 /* Motorola 68K */ 691 #define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */ 692 #define PROC_ALPHA 0x03 /* DEC Alpha */ 693 694 /* 695 * Specific Minimim Processor - sigBYTE dsProcessor; FLAG BITS 696 * 697 * Different bit definitions dependent on processor_family 698 */ 699 700 /* PROC_INTEL: */ 701 #define PROC_8086 0x01 /* Intel 8086 */ 702 #define PROC_286 0x02 /* Intel 80286 */ 703 #define PROC_386 0x04 /* Intel 80386 */ 704 #define PROC_486 0x08 /* Intel 80486 */ 705 #define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */ 706 #define PROC_P6 0x20 /* Intel 686 aka P6 */ 707 708 /* PROC_MOTOROLA: */ 709 #define PROC_68000 0x01 /* Motorola 68000 */ 710 #define PROC_68020 0x02 /* Motorola 68020 */ 711 #define PROC_68030 0x04 /* Motorola 68030 */ 712 #define PROC_68040 0x08 /* Motorola 68040 */ 713 714 /* Filetype - sigBYTE dsFiletype; DISTINCT VALUES */ 715 #define FT_EXECUTABLE 0 /* Executable Program */ 716 #define FT_SCRIPT 1 /* Script/Batch File??? */ 717 #define FT_HBADRVR 2 /* HBA Driver */ 718 #define FT_OTHERDRVR 3 /* Other Driver */ 719 #define FT_IFS 4 /* Installable Filesystem Driver */ 720 #define FT_ENGINE 5 /* DPT Engine */ 721 #define FT_COMPDRVR 6 /* Compressed Driver Disk */ 722 #define FT_LANGUAGE 7 /* Foreign Language file */ 723 #define FT_FIRMWARE 8 /* Downloadable or actual Firmware */ 724 #define FT_COMMMODL 9 /* Communications Module */ 725 #define FT_INT13 10 /* INT 13 style HBA Driver */ 726 #define FT_HELPFILE 11 /* Help file */ 727 #define FT_LOGGER 12 /* Event Logger */ 728 #define FT_INSTALL 13 /* An Install Program */ 729 #define FT_LIBRARY 14 /* Storage Manager Real-Mode Calls */ 730 #define FT_RESOURCE 15 /* Storage Manager Resource File */ 731 #define FT_MODEM_DB 16 /* Storage Manager Modem Database */ 732 733 /* Filetype flags - sigBYTE dsFiletypeFlags; FLAG BITS */ 734 #define FTF_DLL 0x01 /* Dynamic Link Library */ 735 #define FTF_NLM 0x02 /* Netware Loadable Module */ 736 #define FTF_OVERLAYS 0x04 /* Uses overlays */ 737 #define FTF_DEBUG 0x08 /* Debug version */ 738 #define FTF_TSR 0x10 /* TSR */ 739 #define FTF_SYS 0x20 /* DOS Lodable driver */ 740 #define FTF_PROTECTED 0x40 /* Runs in protected mode */ 741 #define FTF_APP_SPEC 0x80 /* Application Specific */ 742 743 /* OEM - sigBYTE dsOEM; DISTINCT VALUES */ 744 #define OEM_DPT 0 /* DPT */ 745 #define OEM_ATT 1 /* ATT */ 746 #define OEM_NEC 2 /* NEC */ 747 #define OEM_ALPHA 3 /* Alphatronix */ 748 #define OEM_AST 4 /* AST */ 749 #define OEM_OLIVETTI 5 /* Olivetti */ 750 #define OEM_SNI 6 /* Siemens/Nixdorf */ 751 752 /* Operating System - sigLONG dsOS; FLAG BITS */ 753 #define OS_DOS 0x00000001 /* PC/MS-DOS */ 754 #define OS_WINDOWS 0x00000002 /* Microsoft Windows 3.x */ 755 #define OS_WINDOWS_NT 0x00000004 /* Microsoft Windows NT */ 756 #define OS_OS2M 0x00000008 /* OS/2 1.2.x,MS 1.3.0,IBM 1.3.x */ 757 #define OS_OS2L 0x00000010 /* Microsoft OS/2 1.301 - LADDR */ 758 #define OS_OS22x 0x00000020 /* IBM OS/2 2.x */ 759 #define OS_NW286 0x00000040 /* Novell NetWare 286 */ 760 #define OS_NW386 0x00000080 /* Novell NetWare 386 */ 761 #define OS_GEN_UNIX 0x00000100 /* Generic Unix */ 762 #define OS_SCO_UNIX 0x00000200 /* SCO Unix */ 763 #define OS_ATT_UNIX 0x00000400 /* ATT Unix */ 764 #define OS_UNIXWARE 0x00000800 /* UnixWare Unix */ 765 #define OS_INT_UNIX 0x00001000 /* Interactive Unix */ 766 #define OS_SOLARIS 0x00002000 /* SunSoft Solaris */ 767 #define OS_QN 0x00004000 /* QNX for Tom Moch */ 768 #define OS_NEXTSTEP 0x00008000 /* NeXTSTEP */ 769 #define OS_BANYAN 0x00010000 /* Banyan Vines */ 770 #define OS_OLIVETTI_UNIX 0x00020000 /* Olivetti Unix */ 771 #define OS_FREEBSD 0x00040000 /* FreeBSD 2.2 and later */ 772 #define OS_OTHER 0x80000000 /* Other */ 773 774 /* Capabilities - sigWORD dsCapabilities; FLAG BITS */ 775 #define CAP_RAID0 0x0001 /* RAID-0 */ 776 #define CAP_RAID1 0x0002 /* RAID-1 */ 777 #define CAP_RAID3 0x0004 /* RAID-3 */ 778 #define CAP_RAID5 0x0008 /* RAID-5 */ 779 #define CAP_SPAN 0x0010 /* Spanning */ 780 #define CAP_PASS 0x0020 /* Provides passthrough */ 781 #define CAP_OVERLAP 0x0040 /* Passthrough supports overlapped commands */ 782 #define CAP_ASPI 0x0080 /* Supports ASPI Command Requests */ 783 #define CAP_ABOVE16MB 0x0100 /* ISA Driver supports greater than 16MB */ 784 #define CAP_EXTEND 0x8000 /* Extended info appears after description */ 785 786 /* Devices Supported - sigWORD dsDeviceSupp; FLAG BITS */ 787 #define DEV_DASD 0x0001 /* DASD (hard drives) */ 788 #define DEV_TAPE 0x0002 /* Tape drives */ 789 #define DEV_PRINTER 0x0004 /* Printers */ 790 #define DEV_PROC 0x0008 /* Processors */ 791 #define DEV_WORM 0x0010 /* WORM drives */ 792 #define DEV_CDROM 0x0020 /* CD-ROM drives */ 793 #define DEV_SCANNER 0x0040 /* Scanners */ 794 #define DEV_OPTICAL 0x0080 /* Optical Drives */ 795 #define DEV_JUKEBOX 0x0100 /* Jukebox */ 796 #define DEV_COMM 0x0200 /* Communications Devices */ 797 #define DEV_OTHER 0x0400 /* Other Devices */ 798 #define DEV_ALL 0xFFFF /* All SCSI Devices */ 799 800 /* Adapters Families Supported - sigWORD dsAdapterSupp; FLAG BITS */ 801 #define ADF_2001 0x0001 /* PM2001 */ 802 #define ADF_2012A 0x0002 /* PM2012A */ 803 #define ADF_PLUS_ISA 0x0004 /* PM2011,PM2021 */ 804 #define ADF_PLUS_EISA 0x0008 /* PM2012B,PM2022 */ 805 #define ADF_SC3_ISA 0x0010 /* PM2021 */ 806 #define ADF_SC3_EISA 0x0020 /* PM2022,PM2122, etc */ 807 #define ADF_SC3_PCI 0x0040 /* SmartCache III PCI */ 808 #define ADF_SC4_ISA 0x0080 /* SmartCache IV ISA */ 809 #define ADF_SC4_EISA 0x0100 /* SmartCache IV EISA */ 810 #define ADF_SC4_PCI 0x0200 /* SmartCache IV PCI */ 811 #define ADF_ALL_MASTER 0xFFFE /* All bus mastering */ 812 #define ADF_ALL_CACHE 0xFFFC /* All caching */ 813 #define ADF_ALL 0xFFFF /* ALL DPT adapters */ 814 815 /* Application - sigWORD dsApplication; FLAG BITS */ 816 #define APP_DPTMGR 0x0001 /* DPT Storage Manager */ 817 #define APP_ENGINE 0x0002 /* DPT Engine */ 818 #define APP_SYTOS 0x0004 /* Sytron Sytos Plus */ 819 #define APP_CHEYENNE 0x0008 /* Cheyenne ARCServe + ARCSolo */ 820 #define APP_MSCDEX 0x0010 /* Microsoft CD-ROM extensions */ 821 #define APP_NOVABACK 0x0020 /* NovaStor Novaback */ 822 #define APP_AIM 0x0040 /* Archive Information Manager */ 823 824 /* Requirements - sigBYTE dsRequirements; FLAG BITS */ 825 #define REQ_SMARTROM 0x01 /* Requires SmartROM to be present */ 826 #define REQ_DPTDDL 0x02 /* Requires DPTDDL.SYS to be loaded */ 827 #define REQ_HBA_DRIVER 0x04 /* Requires an HBA driver to be loaded */ 828 #define REQ_ASPI_TRAN 0x08 /* Requires an ASPI Transport Modules */ 829 #define REQ_ENGINE 0x10 /* Requires a DPT Engine to be loaded */ 830 #define REQ_COMM_ENG 0x20 /* Requires a DPT Communications Engine */ 831 832 typedef struct dpt_sig { 833 char dsSignature[6]; /* ALWAYS "dPtSiG" */ 834 u_int8_t SigVersion; /* signature version (currently 1) */ 835 u_int8_t ProcessorFamily; /* what type of processor */ 836 u_int8_t Processor; /* precise processor */ 837 u_int8_t Filetype; /* type of file */ 838 u_int8_t FiletypeFlags; /* flags to specify load type, etc. */ 839 u_int8_t OEM; /* OEM file was created for */ 840 u_int32_t OS; /* which Operating systems */ 841 u_int16_t Capabilities; /* RAID levels, etc. */ 842 u_int16_t DeviceSupp; /* Types of SCSI devices supported */ 843 u_int16_t AdapterSupp; /* DPT adapter families supported */ 844 u_int16_t Application; /* applications file is for */ 845 u_int8_t Requirements; /* Other driver dependencies */ 846 u_int8_t Version; /* 1 */ 847 u_int8_t Revision; /* 'J' */ 848 u_int8_t SubRevision; /* '9', ' ' if N/A */ 849 u_int8_t Month; /* creation month */ 850 u_int8_t Day; /* creation day */ 851 u_int8_t Year; /* creation year since 1980 */ 852 char *Description; /* description (NULL terminated) */ 853 } dpt_sig_t; 854 855 /* 32 bytes minimum - with no description. Put NULL at description[0] */ 856 /* 81 bytes maximum - with 49 character description plus NULL. */ 857 858 /* This line added at Roycroft's request */ 859 /* Microsoft's NT compiler gets confused if you do a pack and don't */ 860 /* restore it. */ 861 typedef struct eata_pass_through { 862 u_int8_t eataID[4]; 863 u_int32_t command; 864 865 #define EATAUSRCMD (('D'<<8)|65) /* EATA PassThrough Command */ 866 #define DPT_SIGNATURE (('D'<<8)|67) /* Get Signature Structure */ 867 #define DPT_NUMCTRLS (('D'<<8)|68) /* Get Number Of DPT Adapters */ 868 #define DPT_CTRLINFO (('D'<<8)|69) /* Get Adapter Info Structure */ 869 #define DPT_SYSINFO (('D'<<8)|72) /* Get System Info Structure */ 870 #define DPT_BLINKLED (('D'<<8)|75) /* Get The BlinkLED Status */ 871 872 u_int8_t *command_buffer; 873 eata_ccb_t command_packet; 874 u_int32_t timeout; 875 u_int8_t host_status; 876 u_int8_t target_status; 877 u_int8_t retries; 878 } eata_pt_t; 879 880 typedef enum { 881 DCCB_FREE = 0x00, 882 DCCB_ACTIVE = 0x01, 883 DCCB_RELEASE_SIMQ = 0x02 884 } dccb_state; 885 886 typedef struct dpt_ccb { 887 eata_ccb_t eata_ccb; 888 bus_dmamap_t dmamap; 889 dpt_sg_t *sg_list; 890 u_int32_t sg_busaddr; 891 dccb_state state; 892 union ccb *ccb; 893 struct scsi_sense_data sense_data; 894 u_int8_t tag; 895 u_int8_t retries; 896 u_int8_t status; /* status of this queueslot */ 897 u_int8_t *cmd; /* address of cmd */ 898 899 u_int32_t transaction_id; 900 u_int32_t result; 901 caddr_t data; 902 SLIST_ENTRY(dpt_ccb) links; 903 904 #ifdef DPT_MEASURE_PERFORMANCE 905 u_int32_t submitted_time; 906 struct timeval command_started; 907 struct timeval command_ended; 908 #endif 909 } dpt_ccb_t; 910 911 /* 912 * This is provided for compatibility with UnixWare only. 913 * Some of the fields may be bogus. 914 * Others may have a totally different meaning. 915 */ 916 typedef struct dpt_scsi_ha { 917 u_int32_t ha_state; /* Operational state */ 918 u_int8_t ha_id[MAX_CHANNELS]; /* Host adapter SCSI ids */ 919 int32_t ha_base; /* Base I/O address */ 920 int ha_max_jobs; /* Max number of Active Jobs */ 921 int ha_cache:2; /* Cache parameters */ 922 int ha_cachesize:30; /* In meg, only if cache present*/ 923 int ha_nbus; /* Number Of Busses on HBA */ 924 int ha_ntargets; /* Number Of Targets Supported */ 925 int ha_nluns; /* Number Of LUNs Supported */ 926 int ha_tshift; /* Shift value for target */ 927 int ha_bshift; /* Shift value for bus */ 928 int ha_npend; /* # of jobs sent to HBA */ 929 int ha_active_jobs; /* Number Of Active Jobs */ 930 char ha_fw_version[4]; /* Firmware Revision Level */ 931 void *ha_ccb; /* Controller command blocks */ 932 void *ha_cblist; /* Command block free list */ 933 void *ha_dev; /* Logical unit queues */ 934 void *ha_StPkt_lock; /* Status Packet Lock */ 935 void *ha_ccb_lock; /* CCB Lock */ 936 void *ha_LuQWaiting; /* Lu Queue Waiting List */ 937 void *ha_QWait_lock; /* Device Que Waiting Lock */ 938 int ha_QWait_opri; /* Saved Priority Level */ 939 #ifdef DPT_TARGET_MODE 940 dpt_ccb_t *target_ccb[MAX_CHANNELS]; /* Command block waiting writebuf */ 941 #endif 942 } dpt_compat_ha_t; 943 944 /* 945 * Describe the Inquiry Data returned on Page 0 from the Adapter. The 946 * Page C1 Inquiry Data is described in the DptConfig_t structure above. 947 */ 948 typedef struct { 949 u_int8_t deviceType; 950 u_int8_t rm_dtq; 951 u_int8_t otherData[6]; 952 u_int8_t vendor[8]; 953 u_int8_t modelNum[16]; 954 u_int8_t firmware[4]; 955 u_int8_t protocol[4]; 956 } dpt_inq_t; 957 958 /* 959 * sp_EOC is not `safe', so I will check sp_Messages[0] instead! 960 */ 961 #define DptStat_BUSY(x) ((x)->sp_ID_Message) 962 #define DptStat_Reset_BUSY(x) \ 963 ((x)->msg[0] = 0xA5, (x)->EOC = 0, \ 964 (x)->ccb_busaddr = ~0) 965 966 #ifdef DPT_MEASURE_PERFORMANCE 967 #define BIG_ENOUGH 0x8fffffff 968 typedef struct dpt_metrics { 969 u_int32_t command_count[256]; /* We assume MAX 256 SCSI commands */ 970 u_int32_t max_command_time[256]; 971 u_int32_t min_command_time[256]; 972 973 u_int32_t min_intr_time; 974 u_int32_t max_intr_time; 975 u_int32_t aborted_interrupts; 976 u_int32_t spurious_interrupts; 977 978 u_int32_t max_waiting_count; 979 u_int32_t max_submit_count; 980 u_int32_t max_complete_count; 981 982 u_int32_t min_waiting_time; 983 u_int32_t min_submit_time; 984 u_int32_t min_complete_time; 985 986 u_int32_t max_waiting_time; 987 u_int32_t max_submit_time; 988 u_int32_t max_complete_time; 989 990 u_int32_t command_collisions; 991 u_int32_t command_too_busy; 992 u_int32_t max_eata_tries; 993 u_int32_t min_eata_tries; 994 995 u_int32_t read_by_size_count[10]; 996 u_int32_t write_by_size_count[10]; 997 u_int32_t read_by_size_min_time[10]; 998 u_int32_t read_by_size_max_time[10]; 999 u_int32_t write_by_size_min_time[10]; 1000 u_int32_t write_by_size_max_time[10]; 1001 1002 #define SIZE_512 0 1003 #define SIZE_1K 1 1004 #define SIZE_2K 2 1005 #define SIZE_4K 3 1006 #define SIZE_8K 4 1007 #define SIZE_16K 5 1008 #define SIZE_32K 6 1009 #define SIZE_64K 7 1010 #define SIZE_BIGGER 8 1011 #define SIZE_OTHER 9 1012 1013 struct timeval intr_started; 1014 1015 u_int32_t warm_starts; 1016 u_int32_t cold_boots; 1017 } dpt_perf_t; 1018 #endif 1019 1020 struct sg_map_node { 1021 bus_dmamap_t sg_dmamap; 1022 bus_addr_t sg_physaddr; 1023 dpt_sg_t* sg_vaddr; 1024 SLIST_ENTRY(sg_map_node) links; 1025 }; 1026 1027 /* Main state machine and interface structure */ 1028 typedef struct dpt_softc { 1029 bus_space_tag_t tag; 1030 bus_space_handle_t bsh; 1031 bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */ 1032 dpt_ccb_t *dpt_dccbs; /* Array of dpt ccbs */ 1033 bus_addr_t dpt_ccb_busbase; /* phys base address of array */ 1034 bus_addr_t dpt_ccb_busend; /* phys end address of array */ 1035 1036 u_int32_t handle_interrupts :1, /* Are we ready for real work? */ 1037 target_mode_enabled :1, 1038 resource_shortage :1, 1039 cache_type :2, 1040 spare :28; 1041 1042 int total_dccbs; 1043 int free_dccbs; 1044 int pending_ccbs; 1045 int completed_ccbs; 1046 1047 SLIST_HEAD(, dpt_ccb) free_dccb_list; 1048 LIST_HEAD(, ccb_hdr) pending_ccb_list; 1049 1050 bus_dma_tag_t parent_dmat; 1051 bus_dma_tag_t dccb_dmat; /* dmat for our ccb array */ 1052 bus_dmamap_t dccb_dmamap; 1053 bus_dma_tag_t sg_dmat; /* dmat for our sg maps */ 1054 SLIST_HEAD(, sg_map_node) sg_maps; 1055 1056 struct cam_sim *sims[MAX_CHANNELS]; 1057 struct cam_path *paths[MAX_CHANNELS]; 1058 u_int32_t commands_processed; 1059 u_int32_t lost_interrupts; 1060 1061 /* 1062 * These three parameters can be used to allow for wide scsi, and 1063 * for host adapters that support multiple busses. The first two 1064 * should be set to 1 more than the actual max id or lun (i.e. 8 for 1065 * normal systems). 1066 * 1067 * There is a FAT assumption here; We assume that these will never 1068 * exceed MAX_CHANNELS, MAX_TARGETS, MAX_LUNS 1069 */ 1070 u_int channels; /* # of avail scsi chan. */ 1071 u_int32_t max_id; 1072 u_int32_t max_lun; 1073 1074 u_int8_t irq; 1075 u_int8_t dma_channel; 1076 1077 TAILQ_ENTRY(dpt_softc) links; 1078 int unit; 1079 int init_level; 1080 1081 /* 1082 * Every object on a unit can have a receiver, if it treats 1083 * us as a target. We do that so that separate and independant 1084 * clients can consume received buffers. 1085 */ 1086 1087 #define DPT_RW_BUFFER_SIZE (8 * 1024) 1088 dpt_ccb_t *target_ccb[MAX_CHANNELS][MAX_TARGETS][MAX_LUNS]; 1089 u_int8_t *rw_buffer[MAX_CHANNELS][MAX_TARGETS][MAX_LUNS]; 1090 dpt_rec_buff buffer_receiver[MAX_CHANNELS][MAX_TARGETS][MAX_LUNS]; 1091 1092 dpt_inq_t board_data; 1093 u_int8_t EATA_revision; 1094 u_int8_t bustype; /* bustype of HBA */ 1095 u_int32_t state; /* state of HBA */ 1096 1097 #define DPT_HA_FREE 0x00000000 1098 #define DPT_HA_OK 0x00000000 1099 #define DPT_HA_NO_TIMEOUT 0x00000000 1100 #define DPT_HA_BUSY 0x00000001 1101 #define DPT_HA_TIMEOUT 0x00000002 1102 #define DPT_HA_RESET 0x00000004 1103 #define DPT_HA_LOCKED 0x00000008 1104 #define DPT_HA_ABORTED 0x00000010 1105 #define DPT_HA_CONTROL_ACTIVE 0x00000020 1106 #define DPT_HA_SHUTDOWN_ACTIVE 0x00000040 1107 #define DPT_HA_COMMAND_ACTIVE 0x00000080 1108 #define DPT_HA_QUIET 0x00000100 1109 1110 #ifdef DPT_LOST_IRQ 1111 #define DPT_LOST_IRQ_SET 0x10000000 1112 #define DPT_LOST_IRQ_ACTIVE 0x20000000 1113 #endif 1114 1115 #ifdef DPT_HANDLE_TIMEOUTS 1116 #define DPT_HA_TIMEOUTS_SET 0x40000000 1117 #define DPT_HA_TIMEOUTS_ACTIVE 0x80000000 1118 #endif 1119 1120 u_int8_t primary; /* true if primary */ 1121 1122 u_int8_t more_support :1, /* HBA supports MORE flag */ 1123 immediate_support :1, /* HBA supports IMMEDIATE */ 1124 broken_INQUIRY :1, /* EISA HBA w/broken INQUIRY */ 1125 spare2 :5; 1126 1127 u_int8_t resetlevel[MAX_CHANNELS]; 1128 u_int32_t last_ccb; /* Last used ccb */ 1129 u_int32_t cplen; /* size of CP in words */ 1130 u_int16_t cppadlen; /* pad length of cp */ 1131 u_int16_t max_dccbs; 1132 u_int16_t sgsize; /* Entries in the SG list */ 1133 u_int8_t hostid[MAX_CHANNELS]; /* SCSI ID of HBA */ 1134 u_int32_t cache_size; 1135 1136 volatile dpt_sp_t *sp; /* status packet */ 1137 /* Copied from the status packet during interrupt handler */ 1138 u_int8_t hba_stat; 1139 u_int8_t scsi_stat; /* Target SCSI status */ 1140 u_int32_t residue_len; /* Number of bytes not transferred */ 1141 bus_addr_t sp_physaddr; /* phys address of status packet */ 1142 1143 /* 1144 * We put ALL conditional elements at the tail for the structure. 1145 * If we do not, then userland code will crash or trash based on which 1146 * kernel it is running with. 1147 * This isi most visible with usr/sbin/dpt_softc(8) 1148 */ 1149 1150 #ifdef DPT_MEASURE_PERFORMANCE 1151 dpt_perf_t performance; 1152 #endif 1153 1154 #ifdef DPT_RESET_HBA 1155 struct timeval last_contact; 1156 #endif 1157 } dpt_softc_t; 1158 1159 /* 1160 * This structure is used to pass dpt_softc contents to userland via the 1161 * ioctl DPT_IOCTL_SOFTC. The reason for this maddness, is that FreeBSD 1162 * (all BSDs ?) chose to actually assign a nasty meaning to the IOCTL word, 1163 * encoding 13 bits of it as size. As dpt_softc_t is somewhere between 1164 * 8,594 and 8,600 (depends on options), we have to copy the data to 1165 * something less than 4KB long. This siliness also solves the problem of 1166 * varying definition of dpt_softc_t, As the variants are exluded from 1167 * dpt_user_softc. 1168 * 1169 * See dpt_softc_t above for enumerations, comments and such. 1170 */ 1171 typedef struct dpt_user_softc { 1172 int unit; 1173 u_int32_t handle_interrupts :1, /* Are we ready for real work? */ 1174 target_mode_enabled :1, 1175 spare :30; 1176 1177 int total_ccbs_count; 1178 int free_ccbs_count; 1179 int waiting_ccbs_count; 1180 int submitted_ccbs_count; 1181 int completed_ccbs_count; 1182 1183 u_int32_t queue_status; 1184 u_int32_t free_lock; 1185 u_int32_t waiting_lock; 1186 u_int32_t submitted_lock; 1187 u_int32_t completed_lock; 1188 1189 u_int32_t commands_processed; 1190 u_int32_t lost_interrupts; 1191 1192 u_int8_t channels; 1193 u_int32_t max_id; 1194 u_int32_t max_lun; 1195 1196 u_int16_t io_base; 1197 u_int8_t *v_membase; 1198 u_int8_t *p_membase; 1199 1200 u_int8_t irq; 1201 u_int8_t dma_channel; 1202 1203 dpt_inq_t board_data; 1204 u_int8_t EATA_revision; 1205 u_int8_t bustype; 1206 u_int32_t state; 1207 1208 u_int8_t primary; 1209 u_int8_t more_support :1, 1210 immediate_support :1, 1211 broken_INQUIRY :1, 1212 spare2 :5; 1213 1214 u_int8_t resetlevel[MAX_CHANNELS]; 1215 u_int32_t last_ccb; 1216 u_int32_t cplen; 1217 u_int16_t cppadlen; 1218 u_int16_t queuesize; 1219 u_int16_t sgsize; 1220 u_int8_t hostid[MAX_CHANNELS]; 1221 u_int32_t cache_type :2, 1222 cache_size :30; 1223 } dpt_user_softc_t; 1224 1225 /* 1226 * Externals: 1227 * These all come from dpt_scsi.c 1228 * 1229 */ 1230 #ifdef _KERNEL 1231 /* This function gets the current hi-res time and returns it to the caller */ 1232 static __inline struct timeval 1233 dpt_time_now(void) 1234 { 1235 struct timeval now; 1236 1237 microtime(&now); 1238 return(now); 1239 } 1240 1241 /* 1242 * Given a minor device number, get its SCSI Unit. 1243 */ 1244 static __inline int 1245 dpt_minor2unit(int minor) 1246 { 1247 return(minor2hba(minor)); 1248 } 1249 1250 dpt_softc_t *dpt_minor2softc(int minor_no); 1251 1252 #endif /* _KERNEL */ 1253 1254 /* 1255 * This function substracts one timval structure from another, 1256 * Returning the result in usec. 1257 * It assumes that less than 4 billion usecs passed form start to end. 1258 * If times are sensless, ~0 is returned. 1259 */ 1260 static __inline u_int32_t 1261 dpt_time_delta(struct timeval start, 1262 struct timeval end) 1263 { 1264 if (start.tv_sec > end.tv_sec) 1265 return(~0); 1266 1267 if ( (start.tv_sec == end.tv_sec) && (start.tv_usec > end.tv_usec) ) 1268 return(~0); 1269 1270 return ( (end.tv_sec - start.tv_sec) * 1000000 + 1271 (end.tv_usec - start.tv_usec) ); 1272 } 1273 1274 extern TAILQ_HEAD(dpt_softc_list, dpt_softc) dpt_softcs; 1275 1276 extern int dpt_controllers_present; 1277 1278 #ifdef _KERNEL 1279 dpt_softc_t * dpt_alloc(device_t, bus_space_tag_t, bus_space_handle_t); 1280 #endif 1281 void dpt_free(struct dpt_softc *dpt); 1282 int dpt_init(struct dpt_softc *dpt); 1283 int dpt_attach(dpt_softc_t * dpt); 1284 void dpt_intr(void *arg); 1285 1286 dpt_conf_t * dpt_pio_get_conf(u_int32_t); 1287 1288 #if 0 1289 extern void hex_dump(u_char * data, int length, 1290 char *name, int no); 1291 extern char *i2bin(unsigned int no, int length); 1292 extern char *scsi_cmd_name(u_int8_t cmd); 1293 1294 extern dpt_conf_t *dpt_get_conf(dpt_softc_t *dpt, u_int8_t page, 1295 u_int8_t target, u_int8_t size, 1296 int extent); 1297 1298 extern int dpt_setup(dpt_softc_t * dpt, dpt_conf_t * conf); 1299 extern int dpt_attach(dpt_softc_t * dpt); 1300 extern void dpt_shutdown(int howto, dpt_softc_t *dpt); 1301 extern void dpt_detect_cache(dpt_softc_t *dpt); 1302 1303 extern int dpt_user_cmd(dpt_softc_t *dpt, eata_pt_t *user_cmd, 1304 caddr_t cmdarg, int minor_no); 1305 1306 extern u_int8_t dpt_blinking_led(dpt_softc_t *dpt); 1307 1308 extern dpt_rb_t dpt_register_buffer(int unit, u_int8_t channel, u_int8_t target, 1309 u_int8_t lun, u_int8_t mode, 1310 u_int16_t length, u_int16_t offset, 1311 dpt_rec_buff callback, dpt_rb_op_t op); 1312 1313 extern int dpt_send_buffer(int unit, u_int8_t channel, u_int8_t target, 1314 u_int8_t lun, u_int8_t mode, u_int16_t length, 1315 u_int16_t offset, void *data, 1316 buff_wr_done callback); 1317 1318 1319 1320 void dpt_reset_performance(dpt_softc_t *dpt); 1321 #endif 1322 1323 #endif /* _DPT_H */ 1324