1 /*- 2 * Copyright (c) 2009 Yahoo! Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 */ 27 /*- 28 * Copyright (c) 2011 LSI Corp. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 1. Redistributions of source code must retain the above copyright 35 * notice, this list of conditions and the following disclaimer. 36 * 2. Redistributions in binary form must reproduce the above copyright 37 * notice, this list of conditions and the following disclaimer in the 38 * documentation and/or other materials provided with the distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 41 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 43 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 44 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 45 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 46 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 48 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 49 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 50 * SUCH DAMAGE. 51 * 52 * LSI MPT-Fusion Host Adapter FreeBSD 53 * 54 * $FreeBSD: src/sys/dev/mps/mps.c,v 1.14 2012/01/26 18:17:21 ken Exp $ 55 */ 56 57 /* Communications core for LSI MPT2 */ 58 59 /* TODO Move headers to mpsvar */ 60 #include <sys/types.h> 61 #include <sys/param.h> 62 #include <sys/systm.h> 63 #include <sys/kernel.h> 64 #include <sys/lock.h> 65 #include <sys/globaldata.h> 66 #include <sys/module.h> 67 #include <sys/bus.h> 68 #include <sys/conf.h> 69 #include <sys/bio.h> 70 #include <sys/malloc.h> 71 #include <sys/uio.h> 72 #include <sys/sysctl.h> 73 #include <sys/queue.h> 74 #include <sys/kthread.h> 75 #include <sys/endian.h> 76 #include <sys/eventhandler.h> 77 78 #include <sys/rman.h> 79 80 #include <bus/pci/pcivar.h> 81 82 #include <bus/cam/scsi/scsi_all.h> 83 84 #include <dev/raid/mps/mpi/mpi2_type.h> 85 #include <dev/raid/mps/mpi/mpi2.h> 86 #include <dev/raid/mps/mpi/mpi2_ioc.h> 87 #include <dev/raid/mps/mpi/mpi2_sas.h> 88 #include <dev/raid/mps/mpi/mpi2_cnfg.h> 89 #include <dev/raid/mps/mpi/mpi2_init.h> 90 #include <dev/raid/mps/mpi/mpi2_tool.h> 91 #include <dev/raid/mps/mps_ioctl.h> 92 #include <dev/raid/mps/mpsvar.h> 93 #include <dev/raid/mps/mps_table.h> 94 95 static int mps_diag_reset(struct mps_softc *sc); 96 static int mps_init_queues(struct mps_softc *sc); 97 static int mps_message_unit_reset(struct mps_softc *sc); 98 static int mps_transition_operational(struct mps_softc *sc); 99 static void mps_startup(void *arg); 100 static int mps_send_iocinit(struct mps_softc *sc); 101 static int mps_attach_log(struct mps_softc *sc); 102 static __inline void mps_complete_command(struct mps_command *cm); 103 static void mps_dispatch_event(struct mps_softc *sc, uintptr_t data, 104 MPI2_EVENT_NOTIFICATION_REPLY *reply); 105 static void mps_config_complete(struct mps_softc *sc, struct mps_command *cm); 106 static void mps_periodic(void *); 107 static int mps_reregister_events(struct mps_softc *sc); 108 static void mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm); 109 110 SYSCTL_NODE(_hw, OID_AUTO, mps, CTLFLAG_RD, 0, "MPS Driver Parameters"); 111 112 MALLOC_DEFINE(M_MPT2, "mps", "mpt2 driver memory"); 113 114 /* 115 * Do a "Diagnostic Reset" aka a hard reset. This should get the chip out of 116 * any state and back to its initialization state machine. 117 */ 118 static char mpt2_reset_magic[] = { 0x00, 0x0f, 0x04, 0x0b, 0x02, 0x07, 0x0d }; 119 120 static int 121 mps_diag_reset(struct mps_softc *sc) 122 { 123 uint32_t reg; 124 int i, error, tries = 0; 125 126 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 127 128 /* Clear any pending interrupts */ 129 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 130 131 /* Push the magic sequence */ 132 error = ETIMEDOUT; 133 while (tries++ < 20) { 134 for (i = 0; i < sizeof(mpt2_reset_magic); i++) 135 mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 136 mpt2_reset_magic[i]); 137 138 DELAY(100 * 1000); 139 140 reg = mps_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); 141 if (reg & MPI2_DIAG_DIAG_WRITE_ENABLE) { 142 error = 0; 143 break; 144 } 145 } 146 if (error) 147 return (error); 148 149 /* Send the actual reset. XXX need to refresh the reg? */ 150 mps_regwrite(sc, MPI2_HOST_DIAGNOSTIC_OFFSET, 151 reg | MPI2_DIAG_RESET_ADAPTER); 152 153 /* Wait up to 300 seconds in 50ms intervals */ 154 error = ETIMEDOUT; 155 for (i = 0; i < 60000; i++) { 156 DELAY(50000); 157 reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); 158 if ((reg & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_RESET) { 159 error = 0; 160 break; 161 } 162 } 163 if (error) 164 return (error); 165 166 mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 0x0); 167 168 return (0); 169 } 170 171 static int 172 mps_message_unit_reset(struct mps_softc *sc) 173 { 174 175 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 176 177 mps_regwrite(sc, MPI2_DOORBELL_OFFSET, 178 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET << 179 MPI2_DOORBELL_FUNCTION_SHIFT); 180 DELAY(50000); 181 182 return (0); 183 } 184 185 static int 186 mps_transition_ready(struct mps_softc *sc) 187 { 188 uint32_t reg, state; 189 int error, tries = 0; 190 191 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 192 193 error = 0; 194 while (tries++ < 5) { 195 reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); 196 mps_dprint(sc, MPS_INFO, "Doorbell= 0x%x\n", reg); 197 198 /* 199 * Ensure the IOC is ready to talk. If it's not, try 200 * resetting it. 201 */ 202 if (reg & MPI2_DOORBELL_USED) { 203 mps_diag_reset(sc); 204 DELAY(50000); 205 continue; 206 } 207 208 /* Is the adapter owned by another peer? */ 209 if ((reg & MPI2_DOORBELL_WHO_INIT_MASK) == 210 (MPI2_WHOINIT_PCI_PEER << MPI2_DOORBELL_WHO_INIT_SHIFT)) { 211 device_printf(sc->mps_dev, "IOC is under the control " 212 "of another peer host, aborting initialization.\n"); 213 return (ENXIO); 214 } 215 216 state = reg & MPI2_IOC_STATE_MASK; 217 if (state == MPI2_IOC_STATE_READY) { 218 /* Ready to go! */ 219 error = 0; 220 break; 221 } else if (state == MPI2_IOC_STATE_FAULT) { 222 mps_dprint(sc, MPS_INFO, "IOC in fault state 0x%x\n", 223 state & MPI2_DOORBELL_FAULT_CODE_MASK); 224 mps_diag_reset(sc); 225 } else if (state == MPI2_IOC_STATE_OPERATIONAL) { 226 /* Need to take ownership */ 227 mps_message_unit_reset(sc); 228 } else if (state == MPI2_IOC_STATE_RESET) { 229 /* Wait a bit, IOC might be in transition */ 230 mps_dprint(sc, MPS_FAULT, 231 "IOC in unexpected reset state\n"); 232 } else { 233 mps_dprint(sc, MPS_FAULT, 234 "IOC in unknown state 0x%x\n", state); 235 error = EINVAL; 236 break; 237 } 238 239 /* Wait 50ms for things to settle down. */ 240 DELAY(50000); 241 } 242 243 if (error) 244 device_printf(sc->mps_dev, "Cannot transition IOC to ready\n"); 245 246 return (error); 247 } 248 249 static int 250 mps_transition_operational(struct mps_softc *sc) 251 { 252 uint32_t reg, state; 253 int error; 254 255 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 256 257 error = 0; 258 reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); 259 mps_dprint(sc, MPS_INFO, "Doorbell= 0x%x\n", reg); 260 261 state = reg & MPI2_IOC_STATE_MASK; 262 if (state != MPI2_IOC_STATE_READY) { 263 if ((error = mps_transition_ready(sc)) != 0) { 264 mps_dprint(sc, MPS_FAULT, 265 "%s failed to transition ready\n", __func__); 266 return (error); 267 } 268 } 269 270 error = mps_send_iocinit(sc); 271 return (error); 272 } 273 274 /* 275 * XXX Some of this should probably move to mps.c 276 * 277 * The terms diag reset and hard reset are used interchangeably in the MPI 278 * docs to mean resetting the controller chip. In this code diag reset 279 * cleans everything up, and the hard reset function just sends the reset 280 * sequence to the chip. This should probably be refactored so that every 281 * subsystem gets a reset notification of some sort, and can clean up 282 * appropriately. 283 */ 284 int 285 mps_reinit(struct mps_softc *sc) 286 { 287 int error; 288 uint32_t db; 289 290 mps_printf(sc, "%s sc %p\n", __func__, sc); 291 292 KKASSERT(lockstatus(&sc->mps_lock, curthread) != 0); 293 294 if (sc->mps_flags & MPS_FLAGS_DIAGRESET) { 295 mps_printf(sc, "%s reset already in progress\n", __func__); 296 return 0; 297 } 298 299 /* make sure the completion callbacks can recognize they're getting 300 * a NULL cm_reply due to a reset. 301 */ 302 sc->mps_flags |= MPS_FLAGS_DIAGRESET; 303 304 mps_printf(sc, "%s mask interrupts\n", __func__); 305 mps_mask_intr(sc); 306 307 error = mps_diag_reset(sc); 308 if (error != 0) { 309 panic("%s hard reset failed with error %d", 310 __func__, error); 311 } 312 313 /* Restore the PCI state, including the MSI-X registers */ 314 mps_pci_restore(sc); 315 316 /* Give the I/O subsystem special priority to get itself prepared */ 317 mpssas_handle_reinit(sc); 318 319 /* reinitialize queues after the reset */ 320 bzero(sc->free_queue, sc->fqdepth * 4); 321 mps_init_queues(sc); 322 323 /* get the chip out of the reset state */ 324 error = mps_transition_operational(sc); 325 if (error != 0) 326 panic("%s transition operational failed with error %d", 327 __func__, error); 328 329 /* Reinitialize the reply queue. This is delicate because this 330 * function is typically invoked by task mgmt completion callbacks, 331 * which are called by the interrupt thread. We need to make sure 332 * the interrupt handler loop will exit when we return to it, and 333 * that it will recognize the indexes we've changed. 334 */ 335 sc->replypostindex = 0; 336 mps_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex); 337 mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, sc->replypostindex); 338 339 db = mps_regread(sc, MPI2_DOORBELL_OFFSET); 340 mps_printf(sc, "%s doorbell 0x%08x\n", __func__, db); 341 342 mps_printf(sc, "%s unmask interrupts post %u free %u\n", __func__, 343 sc->replypostindex, sc->replyfreeindex); 344 345 mps_unmask_intr(sc); 346 347 mps_printf(sc, "%s restarting post %u free %u\n", __func__, 348 sc->replypostindex, sc->replyfreeindex); 349 350 /* restart will reload the event masks clobbered by the reset, and 351 * then enable the port. 352 */ 353 mps_reregister_events(sc); 354 355 /* the end of discovery will release the simq, so we're done. */ 356 mps_printf(sc, "%s finished sc %p post %u free %u\n", 357 __func__, sc, 358 sc->replypostindex, sc->replyfreeindex); 359 360 sc->mps_flags &= ~MPS_FLAGS_DIAGRESET; 361 362 return 0; 363 } 364 365 /* Wait for the chip to ACK a word that we've put into its FIFO */ 366 static int 367 mps_wait_db_ack(struct mps_softc *sc) 368 { 369 int retry; 370 371 for (retry = 0; retry < MPS_DB_MAX_WAIT; retry++) { 372 if ((mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) & 373 MPI2_HIS_SYS2IOC_DB_STATUS) == 0) 374 return (0); 375 DELAY(2000); 376 } 377 return (ETIMEDOUT); 378 } 379 380 /* Wait for the chip to signal that the next word in its FIFO can be fetched */ 381 static int 382 mps_wait_db_int(struct mps_softc *sc) 383 { 384 int retry; 385 386 for (retry = 0; retry < MPS_DB_MAX_WAIT; retry++) { 387 if ((mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) & 388 MPI2_HIS_IOC2SYS_DB_STATUS) != 0) 389 return (0); 390 DELAY(2000); 391 } 392 return (ETIMEDOUT); 393 } 394 395 /* Step through the synchronous command state machine, i.e. "Doorbell mode" */ 396 static int 397 mps_request_sync(struct mps_softc *sc, void *req, MPI2_DEFAULT_REPLY *reply, 398 int req_sz, int reply_sz, int timeout) 399 { 400 uint32_t *data32; 401 uint16_t *data16; 402 int i, count, ioc_sz, residual; 403 404 /* Step 1 */ 405 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 406 407 /* Step 2 */ 408 if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) 409 return (EBUSY); 410 411 /* Step 3 412 * Announce that a message is coming through the doorbell. Messages 413 * are pushed at 32bit words, so round up if needed. 414 */ 415 count = (req_sz + 3) / 4; 416 mps_regwrite(sc, MPI2_DOORBELL_OFFSET, 417 (MPI2_FUNCTION_HANDSHAKE << MPI2_DOORBELL_FUNCTION_SHIFT) | 418 (count << MPI2_DOORBELL_ADD_DWORDS_SHIFT)); 419 420 /* Step 4 */ 421 if (mps_wait_db_int(sc) || 422 (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) == 0) { 423 mps_dprint(sc, MPS_FAULT, "Doorbell failed to activate\n"); 424 return (ENXIO); 425 } 426 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 427 if (mps_wait_db_ack(sc) != 0) { 428 mps_dprint(sc, MPS_FAULT, "Doorbell handshake failed\n"); 429 return (ENXIO); 430 } 431 432 /* Step 5 */ 433 /* Clock out the message data synchronously in 32-bit dwords*/ 434 data32 = (uint32_t *)req; 435 for (i = 0; i < count; i++) { 436 mps_regwrite(sc, MPI2_DOORBELL_OFFSET, data32[i]); 437 if (mps_wait_db_ack(sc) != 0) { 438 mps_dprint(sc, MPS_FAULT, 439 "Timeout while writing doorbell\n"); 440 return (ENXIO); 441 } 442 } 443 444 /* Step 6 */ 445 /* Clock in the reply in 16-bit words. The total length of the 446 * message is always in the 4th byte, so clock out the first 2 words 447 * manually, then loop the rest. 448 */ 449 data16 = (uint16_t *)reply; 450 if (mps_wait_db_int(sc) != 0) { 451 mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 0\n"); 452 return (ENXIO); 453 } 454 data16[0] = 455 mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; 456 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 457 if (mps_wait_db_int(sc) != 0) { 458 mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 1\n"); 459 return (ENXIO); 460 } 461 data16[1] = 462 mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; 463 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 464 465 /* Number of 32bit words in the message */ 466 ioc_sz = reply->MsgLength; 467 468 /* 469 * Figure out how many 16bit words to clock in without overrunning. 470 * The precision loss with dividing reply_sz can safely be 471 * ignored because the messages can only be multiples of 32bits. 472 */ 473 residual = 0; 474 count = MIN((reply_sz / 4), ioc_sz) * 2; 475 if (count < ioc_sz * 2) { 476 residual = ioc_sz * 2 - count; 477 mps_dprint(sc, MPS_FAULT, "Driver error, throwing away %d " 478 "residual message words\n", residual); 479 } 480 481 for (i = 2; i < count; i++) { 482 if (mps_wait_db_int(sc) != 0) { 483 mps_dprint(sc, MPS_FAULT, 484 "Timeout reading doorbell %d\n", i); 485 return (ENXIO); 486 } 487 data16[i] = mps_regread(sc, MPI2_DOORBELL_OFFSET) & 488 MPI2_DOORBELL_DATA_MASK; 489 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 490 } 491 492 /* 493 * Pull out residual words that won't fit into the provided buffer. 494 * This keeps the chip from hanging due to a driver programming 495 * error. 496 */ 497 while (residual--) { 498 if (mps_wait_db_int(sc) != 0) { 499 mps_dprint(sc, MPS_FAULT, 500 "Timeout reading doorbell\n"); 501 return (ENXIO); 502 } 503 (void)mps_regread(sc, MPI2_DOORBELL_OFFSET); 504 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 505 } 506 507 /* Step 7 */ 508 if (mps_wait_db_int(sc) != 0) { 509 mps_dprint(sc, MPS_FAULT, "Timeout waiting to exit doorbell\n"); 510 return (ENXIO); 511 } 512 if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) 513 mps_dprint(sc, MPS_FAULT, "Warning, doorbell still active\n"); 514 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 515 516 return (0); 517 } 518 519 static void 520 mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm) 521 { 522 523 mps_dprint(sc, MPS_TRACE, "%s SMID %u cm %p ccb %p\n", __func__, 524 cm->cm_desc.Default.SMID, cm, cm->cm_ccb); 525 526 if (sc->mps_flags & MPS_FLAGS_ATTACH_DONE) 527 KKASSERT(lockstatus(&sc->mps_lock, curthread) != 0); 528 529 if (++sc->io_cmds_active > sc->io_cmds_highwater) 530 sc->io_cmds_highwater++; 531 532 mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET, 533 cm->cm_desc.Words.Low); 534 mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET, 535 cm->cm_desc.Words.High); 536 } 537 538 /* 539 * Just the FACTS, ma'am. 540 */ 541 static int 542 mps_get_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts) 543 { 544 MPI2_DEFAULT_REPLY *reply; 545 MPI2_IOC_FACTS_REQUEST request; 546 int error, req_sz, reply_sz; 547 548 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 549 550 req_sz = sizeof(MPI2_IOC_FACTS_REQUEST); 551 reply_sz = sizeof(MPI2_IOC_FACTS_REPLY); 552 reply = (MPI2_DEFAULT_REPLY *)facts; 553 554 bzero(&request, req_sz); 555 request.Function = MPI2_FUNCTION_IOC_FACTS; 556 error = mps_request_sync(sc, &request, reply, req_sz, reply_sz, 5); 557 558 return (error); 559 } 560 561 static int 562 mps_get_portfacts(struct mps_softc *sc, MPI2_PORT_FACTS_REPLY *facts, int port) 563 { 564 MPI2_PORT_FACTS_REQUEST *request; 565 MPI2_PORT_FACTS_REPLY *reply; 566 struct mps_command *cm; 567 int error; 568 569 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 570 571 if ((cm = mps_alloc_command(sc)) == NULL) 572 return (EBUSY); 573 request = (MPI2_PORT_FACTS_REQUEST *)cm->cm_req; 574 request->Function = MPI2_FUNCTION_PORT_FACTS; 575 request->PortNumber = port; 576 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 577 cm->cm_data = NULL; 578 error = mps_request_polled(sc, cm); 579 reply = (MPI2_PORT_FACTS_REPLY *)cm->cm_reply; 580 if (reply == NULL) { 581 mps_printf(sc, "%s NULL reply\n", __func__); 582 goto done; 583 } 584 if ((reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) { 585 mps_printf(sc, 586 "%s error %d iocstatus 0x%x iocloginfo 0x%x type 0x%x\n", 587 __func__, error, reply->IOCStatus, reply->IOCLogInfo, 588 reply->PortType); 589 error = ENXIO; 590 } 591 bcopy(reply, facts, sizeof(MPI2_PORT_FACTS_REPLY)); 592 done: 593 mps_free_command(sc, cm); 594 595 return (error); 596 } 597 598 static int 599 mps_send_iocinit(struct mps_softc *sc) 600 { 601 MPI2_IOC_INIT_REQUEST init; 602 MPI2_DEFAULT_REPLY reply; 603 int req_sz, reply_sz, error; 604 605 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 606 607 req_sz = sizeof(MPI2_IOC_INIT_REQUEST); 608 reply_sz = sizeof(MPI2_IOC_INIT_REPLY); 609 bzero(&init, req_sz); 610 bzero(&reply, reply_sz); 611 612 /* 613 * Fill in the init block. Note that most addresses are 614 * deliberately in the lower 32bits of memory. This is a micro- 615 * optimzation for PCI/PCIX, though it's not clear if it helps PCIe. 616 */ 617 init.Function = MPI2_FUNCTION_IOC_INIT; 618 init.WhoInit = MPI2_WHOINIT_HOST_DRIVER; 619 init.MsgVersion = MPI2_VERSION; 620 init.HeaderVersion = MPI2_HEADER_VERSION; 621 init.SystemRequestFrameSize = sc->facts->IOCRequestFrameSize; 622 init.ReplyDescriptorPostQueueDepth = sc->pqdepth; 623 init.ReplyFreeQueueDepth = sc->fqdepth; 624 init.SenseBufferAddressHigh = 0; 625 init.SystemReplyAddressHigh = 0; 626 init.SystemRequestFrameBaseAddress.High = 0; 627 init.SystemRequestFrameBaseAddress.Low = (uint32_t)sc->req_busaddr; 628 init.ReplyDescriptorPostQueueAddress.High = 0; 629 init.ReplyDescriptorPostQueueAddress.Low = (uint32_t)sc->post_busaddr; 630 init.ReplyFreeQueueAddress.High = 0; 631 init.ReplyFreeQueueAddress.Low = (uint32_t)sc->free_busaddr; 632 init.TimeStamp.High = 0; 633 init.TimeStamp.Low = (uint32_t)time_second; 634 635 error = mps_request_sync(sc, &init, &reply, req_sz, reply_sz, 5); 636 if ((reply.IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) 637 error = ENXIO; 638 639 mps_dprint(sc, MPS_INFO, "IOCInit status= 0x%x\n", reply.IOCStatus); 640 return (error); 641 } 642 643 void 644 mps_memaddr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 645 { 646 bus_addr_t *addr; 647 648 addr = arg; 649 *addr = segs[0].ds_addr; 650 } 651 652 static int 653 mps_alloc_queues(struct mps_softc *sc) 654 { 655 bus_addr_t queues_busaddr; 656 uint8_t *queues; 657 int qsize, fqsize, pqsize; 658 659 /* 660 * The reply free queue contains 4 byte entries in multiples of 16 and 661 * aligned on a 16 byte boundary. There must always be an unused entry. 662 * This queue supplies fresh reply frames for the firmware to use. 663 * 664 * The reply descriptor post queue contains 8 byte entries in 665 * multiples of 16 and aligned on a 16 byte boundary. This queue 666 * contains filled-in reply frames sent from the firmware to the host. 667 * 668 * These two queues are allocated together for simplicity. 669 */ 670 sc->fqdepth = roundup2((sc->num_replies + 1), 16); 671 sc->pqdepth = roundup2((sc->num_replies + 1), 16); 672 fqsize= sc->fqdepth * 4; 673 pqsize = sc->pqdepth * 8; 674 qsize = fqsize + pqsize; 675 676 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 677 16, 0, /* algnmnt, boundary */ 678 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 679 BUS_SPACE_MAXADDR, /* highaddr */ 680 NULL, NULL, /* filter, filterarg */ 681 qsize, /* maxsize */ 682 1, /* nsegments */ 683 qsize, /* maxsegsize */ 684 0, /* flags */ 685 &sc->queues_dmat)) { 686 device_printf(sc->mps_dev, "Cannot allocate queues DMA tag\n"); 687 return (ENOMEM); 688 } 689 if (bus_dmamem_alloc(sc->queues_dmat, (void **)&queues, BUS_DMA_NOWAIT, 690 &sc->queues_map)) { 691 device_printf(sc->mps_dev, "Cannot allocate queues memory\n"); 692 return (ENOMEM); 693 } 694 bzero(queues, qsize); 695 bus_dmamap_load(sc->queues_dmat, sc->queues_map, queues, qsize, 696 mps_memaddr_cb, &queues_busaddr, 0); 697 698 sc->free_queue = (uint32_t *)queues; 699 sc->free_busaddr = queues_busaddr; 700 sc->post_queue = (MPI2_REPLY_DESCRIPTORS_UNION *)(queues + fqsize); 701 sc->post_busaddr = queues_busaddr + fqsize; 702 703 return (0); 704 } 705 706 static int 707 mps_alloc_replies(struct mps_softc *sc) 708 { 709 int rsize, num_replies; 710 711 /* 712 * sc->num_replies should be one less than sc->fqdepth. We need to 713 * allocate space for sc->fqdepth replies, but only sc->num_replies 714 * replies can be used at once. 715 */ 716 num_replies = max(sc->fqdepth, sc->num_replies); 717 718 rsize = sc->facts->ReplyFrameSize * num_replies * 4; 719 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 720 4, 0, /* algnmnt, boundary */ 721 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 722 BUS_SPACE_MAXADDR, /* highaddr */ 723 NULL, NULL, /* filter, filterarg */ 724 rsize, /* maxsize */ 725 1, /* nsegments */ 726 rsize, /* maxsegsize */ 727 0, /* flags */ 728 &sc->reply_dmat)) { 729 device_printf(sc->mps_dev, "Cannot allocate replies DMA tag\n"); 730 return (ENOMEM); 731 } 732 if (bus_dmamem_alloc(sc->reply_dmat, (void **)&sc->reply_frames, 733 BUS_DMA_NOWAIT, &sc->reply_map)) { 734 device_printf(sc->mps_dev, "Cannot allocate replies memory\n"); 735 return (ENOMEM); 736 } 737 bzero(sc->reply_frames, rsize); 738 bus_dmamap_load(sc->reply_dmat, sc->reply_map, sc->reply_frames, rsize, 739 mps_memaddr_cb, &sc->reply_busaddr, 0); 740 741 return (0); 742 } 743 744 static int 745 mps_alloc_requests(struct mps_softc *sc) 746 { 747 struct mps_command *cm; 748 struct mps_chain *chain; 749 int i, rsize, nsegs; 750 751 rsize = sc->facts->IOCRequestFrameSize * sc->num_reqs * 4; 752 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 753 16, 0, /* algnmnt, boundary */ 754 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 755 BUS_SPACE_MAXADDR, /* highaddr */ 756 NULL, NULL, /* filter, filterarg */ 757 rsize, /* maxsize */ 758 1, /* nsegments */ 759 rsize, /* maxsegsize */ 760 0, /* flags */ 761 &sc->req_dmat)) { 762 device_printf(sc->mps_dev, "Cannot allocate request DMA tag\n"); 763 return (ENOMEM); 764 } 765 if (bus_dmamem_alloc(sc->req_dmat, (void **)&sc->req_frames, 766 BUS_DMA_NOWAIT, &sc->req_map)) { 767 device_printf(sc->mps_dev, "Cannot allocate request memory\n"); 768 return (ENOMEM); 769 } 770 bzero(sc->req_frames, rsize); 771 bus_dmamap_load(sc->req_dmat, sc->req_map, sc->req_frames, rsize, 772 mps_memaddr_cb, &sc->req_busaddr, 0); 773 774 rsize = sc->facts->IOCRequestFrameSize * sc->max_chains * 4; 775 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 776 16, 0, /* algnmnt, boundary */ 777 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 778 BUS_SPACE_MAXADDR, /* highaddr */ 779 NULL, NULL, /* filter, filterarg */ 780 rsize, /* maxsize */ 781 1, /* nsegments */ 782 rsize, /* maxsegsize */ 783 0, /* flags */ 784 &sc->chain_dmat)) { 785 device_printf(sc->mps_dev, "Cannot allocate chain DMA tag\n"); 786 return (ENOMEM); 787 } 788 if (bus_dmamem_alloc(sc->chain_dmat, (void **)&sc->chain_frames, 789 BUS_DMA_NOWAIT, &sc->chain_map)) { 790 device_printf(sc->mps_dev, "Cannot allocate chain memory\n"); 791 return (ENOMEM); 792 } 793 bzero(sc->chain_frames, rsize); 794 bus_dmamap_load(sc->chain_dmat, sc->chain_map, sc->chain_frames, rsize, 795 mps_memaddr_cb, &sc->chain_busaddr, 0); 796 797 rsize = MPS_SENSE_LEN * sc->num_reqs; 798 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 799 1, 0, /* algnmnt, boundary */ 800 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 801 BUS_SPACE_MAXADDR, /* highaddr */ 802 NULL, NULL, /* filter, filterarg */ 803 rsize, /* maxsize */ 804 1, /* nsegments */ 805 rsize, /* maxsegsize */ 806 0, /* flags */ 807 &sc->sense_dmat)) { 808 device_printf(sc->mps_dev, "Cannot allocate sense DMA tag\n"); 809 return (ENOMEM); 810 } 811 if (bus_dmamem_alloc(sc->sense_dmat, (void **)&sc->sense_frames, 812 BUS_DMA_NOWAIT, &sc->sense_map)) { 813 device_printf(sc->mps_dev, "Cannot allocate sense memory\n"); 814 return (ENOMEM); 815 } 816 bzero(sc->sense_frames, rsize); 817 bus_dmamap_load(sc->sense_dmat, sc->sense_map, sc->sense_frames, rsize, 818 mps_memaddr_cb, &sc->sense_busaddr, 0); 819 820 sc->chains = kmalloc(sizeof(struct mps_chain) * sc->max_chains, M_MPT2, 821 M_WAITOK | M_ZERO); 822 for (i = 0; i < sc->max_chains; i++) { 823 chain = &sc->chains[i]; 824 chain->chain = (MPI2_SGE_IO_UNION *)(sc->chain_frames + 825 i * sc->facts->IOCRequestFrameSize * 4); 826 chain->chain_busaddr = sc->chain_busaddr + 827 i * sc->facts->IOCRequestFrameSize * 4; 828 mps_free_chain(sc, chain); 829 sc->chain_free_lowwater++; 830 } 831 832 /* XXX Need to pick a more precise value */ 833 nsegs = (MAXPHYS / PAGE_SIZE) + 1; 834 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 835 1, 0, /* algnmnt, boundary */ 836 BUS_SPACE_MAXADDR, /* lowaddr */ 837 BUS_SPACE_MAXADDR, /* highaddr */ 838 NULL, NULL, /* filter, filterarg */ 839 BUS_SPACE_MAXSIZE_32BIT,/* maxsize */ 840 nsegs, /* nsegments */ 841 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 842 BUS_DMA_ALLOCNOW, /* flags */ 843 &sc->buffer_dmat)) { 844 device_printf(sc->mps_dev, "Cannot allocate buffer DMA tag\n"); 845 return (ENOMEM); 846 } 847 848 /* 849 * SMID 0 cannot be used as a free command per the firmware spec. 850 * Just drop that command instead of risking accounting bugs. 851 */ 852 sc->commands = kmalloc(sizeof(struct mps_command) * sc->num_reqs, 853 M_MPT2, M_WAITOK | M_ZERO); 854 for (i = 1; i < sc->num_reqs; i++) { 855 cm = &sc->commands[i]; 856 cm->cm_req = sc->req_frames + 857 i * sc->facts->IOCRequestFrameSize * 4; 858 cm->cm_req_busaddr = sc->req_busaddr + 859 i * sc->facts->IOCRequestFrameSize * 4; 860 cm->cm_sense = &sc->sense_frames[i]; 861 cm->cm_sense_busaddr = sc->sense_busaddr + i * MPS_SENSE_LEN; 862 cm->cm_desc.Default.SMID = i; 863 cm->cm_sc = sc; 864 TAILQ_INIT(&cm->cm_chain_list); 865 callout_init(&cm->cm_callout); 866 867 /* XXX Is a failure here a critical problem? */ 868 if (bus_dmamap_create(sc->buffer_dmat, 0, &cm->cm_dmamap) == 0) 869 if (i <= sc->facts->HighPriorityCredit) 870 mps_free_high_priority_command(sc, cm); 871 else 872 mps_free_command(sc, cm); 873 else { 874 panic("failed to allocate command %d", i); 875 sc->num_reqs = i; 876 break; 877 } 878 } 879 880 return (0); 881 } 882 883 static int 884 mps_init_queues(struct mps_softc *sc) 885 { 886 int i; 887 888 memset((uint8_t *)sc->post_queue, 0xff, sc->pqdepth * 8); 889 890 /* 891 * According to the spec, we need to use one less reply than we 892 * have space for on the queue. So sc->num_replies (the number we 893 * use) should be less than sc->fqdepth (allocated size). 894 */ 895 if (sc->num_replies >= sc->fqdepth) 896 return (EINVAL); 897 898 /* 899 * Initialize all of the free queue entries. 900 */ 901 for (i = 0; i < sc->fqdepth; i++) 902 sc->free_queue[i] = sc->reply_busaddr + (i * sc->facts->ReplyFrameSize * 4); 903 sc->replyfreeindex = sc->num_replies; 904 905 return (0); 906 } 907 908 /* Get the driver parameter tunables. Lowest priority are the driver defaults. 909 * Next are the global settings, if they exist. Highest are the per-unit 910 * settings, if they exist. 911 */ 912 static void 913 mps_get_tunables(struct mps_softc *sc) 914 { 915 char tmpstr[80]; 916 917 /* XXX default to some debugging for now */ 918 sc->mps_debug = MPS_FAULT; 919 #if 0 /* XXX swildner */ 920 sc->disable_msix = 0; 921 #endif 922 sc->enable_msi = 1; 923 sc->max_chains = MPS_CHAIN_FRAMES; 924 925 /* 926 * Grab the global variables. 927 */ 928 TUNABLE_INT_FETCH("hw.mps.debug_level", &sc->mps_debug); 929 #if 0 /* XXX swildner */ 930 TUNABLE_INT_FETCH("hw.mps.disable_msix", &sc->disable_msix); 931 #endif 932 TUNABLE_INT_FETCH("hw.mps.msi.enable", &sc->enable_msi); 933 TUNABLE_INT_FETCH("hw.mps.max_chains", &sc->max_chains); 934 935 /* Grab the unit-instance variables */ 936 ksnprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.debug_level", 937 device_get_unit(sc->mps_dev)); 938 TUNABLE_INT_FETCH(tmpstr, &sc->mps_debug); 939 940 #if 0 /* XXX swildner */ 941 ksnprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.disable_msix", 942 device_get_unit(sc->mps_dev)); 943 TUNABLE_INT_FETCH(tmpstr, &sc->disable_msix); 944 #endif 945 946 ksnprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.enable_msi", 947 device_get_unit(sc->mps_dev)); 948 TUNABLE_INT_FETCH(tmpstr, &sc->enable_msi); 949 950 ksnprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.max_chains", 951 device_get_unit(sc->mps_dev)); 952 TUNABLE_INT_FETCH(tmpstr, &sc->max_chains); 953 } 954 955 static void 956 mps_setup_sysctl(struct mps_softc *sc) 957 { 958 struct sysctl_ctx_list *sysctl_ctx = NULL; 959 struct sysctl_oid *sysctl_tree = NULL; 960 char tmpstr[80], tmpstr2[80]; 961 962 /* 963 * Setup the sysctl variable so the user can change the debug level 964 * on the fly. 965 */ 966 ksnprintf(tmpstr, sizeof(tmpstr), "MPS controller %d", 967 device_get_unit(sc->mps_dev)); 968 ksnprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mps_dev)); 969 970 sysctl_ctx_init(&sc->sysctl_ctx); 971 sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, 972 SYSCTL_STATIC_CHILDREN(_hw_mps), OID_AUTO, tmpstr2, 973 CTLFLAG_RD, 0, tmpstr); 974 if (sc->sysctl_tree == NULL) 975 return; 976 sysctl_ctx = &sc->sysctl_ctx; 977 sysctl_tree = sc->sysctl_tree; 978 979 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 980 OID_AUTO, "debug_level", CTLFLAG_RW, &sc->mps_debug, 0, 981 "mps debug level"); 982 983 #if 0 /* XXX swildner */ 984 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 985 OID_AUTO, "disable_msix", CTLFLAG_RD, &sc->disable_msix, 0, 986 "Disable the use of MSI-X interrupts"); 987 #endif 988 989 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 990 OID_AUTO, "enable_msi", CTLFLAG_RD, &sc->enable_msi, 0, 991 "Enable the use of MSI interrupts"); 992 993 SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 994 OID_AUTO, "firmware_version", CTLFLAG_RW, &sc->fw_version, 995 strlen(sc->fw_version), "firmware version"); 996 997 SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 998 OID_AUTO, "driver_version", CTLFLAG_RW, MPS_DRIVER_VERSION, 999 strlen(MPS_DRIVER_VERSION), "driver version"); 1000 1001 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1002 OID_AUTO, "io_cmds_active", CTLFLAG_RD, 1003 &sc->io_cmds_active, 0, "number of currently active commands"); 1004 1005 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1006 OID_AUTO, "io_cmds_highwater", CTLFLAG_RD, 1007 &sc->io_cmds_highwater, 0, "maximum active commands seen"); 1008 1009 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1010 OID_AUTO, "chain_free", CTLFLAG_RD, 1011 &sc->chain_free, 0, "number of free chain elements"); 1012 1013 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1014 OID_AUTO, "chain_free_lowwater", CTLFLAG_RD, 1015 &sc->chain_free_lowwater, 0,"lowest number of free chain elements"); 1016 1017 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1018 OID_AUTO, "max_chains", CTLFLAG_RD, 1019 &sc->max_chains, 0,"maximum chain frames that will be allocated"); 1020 1021 #if __FreeBSD_version >= 900030 1022 SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1023 OID_AUTO, "chain_alloc_fail", CTLFLAG_RD, 1024 &sc->chain_alloc_fail, "chain allocation failures"); 1025 #endif //FreeBSD_version >= 900030 1026 } 1027 1028 int 1029 mps_attach(struct mps_softc *sc) 1030 { 1031 int i, error; 1032 1033 mps_get_tunables(sc); 1034 1035 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1036 1037 lockinit(&sc->mps_lock, "MPT2SAS lock", 0, LK_CANRECURSE); 1038 callout_init(&sc->periodic); 1039 TAILQ_INIT(&sc->event_list); 1040 1041 if ((error = mps_transition_ready(sc)) != 0) { 1042 mps_printf(sc, "%s failed to transition ready\n", __func__); 1043 return (error); 1044 } 1045 1046 sc->facts = kmalloc(sizeof(MPI2_IOC_FACTS_REPLY), M_MPT2, 1047 M_ZERO|M_WAITOK); 1048 if ((error = mps_get_iocfacts(sc, sc->facts)) != 0) 1049 return (error); 1050 1051 mps_print_iocfacts(sc, sc->facts); 1052 1053 ksnprintf(sc->fw_version, sizeof(sc->fw_version), 1054 "%02d.%02d.%02d.%02d", 1055 sc->facts->FWVersion.Struct.Major, 1056 sc->facts->FWVersion.Struct.Minor, 1057 sc->facts->FWVersion.Struct.Unit, 1058 sc->facts->FWVersion.Struct.Dev); 1059 1060 mps_printf(sc, "Firmware: %s, Driver: %s\n", sc->fw_version, 1061 MPS_DRIVER_VERSION); 1062 mps_printf(sc, "IOCCapabilities: %b\n", sc->facts->IOCCapabilities, 1063 "\20" "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf" 1064 "\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR" 1065 "\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc"); 1066 1067 /* 1068 * If the chip doesn't support event replay then a hard reset will be 1069 * required to trigger a full discovery. Do the reset here then 1070 * retransition to Ready. A hard reset might have already been done, 1071 * but it doesn't hurt to do it again. 1072 */ 1073 if ((sc->facts->IOCCapabilities & 1074 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY) == 0) { 1075 mps_diag_reset(sc); 1076 if ((error = mps_transition_ready(sc)) != 0) 1077 return (error); 1078 } 1079 1080 /* 1081 * Set flag if IR Firmware is loaded. 1082 */ 1083 if (sc->facts->IOCCapabilities & 1084 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) 1085 sc->ir_firmware = 1; 1086 1087 /* 1088 * Check if controller supports FW diag buffers and set flag to enable 1089 * each type. 1090 */ 1091 if (sc->facts->IOCCapabilities & 1092 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) 1093 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_TRACE].enabled = 1094 TRUE; 1095 if (sc->facts->IOCCapabilities & 1096 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) 1097 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_SNAPSHOT].enabled = 1098 TRUE; 1099 if (sc->facts->IOCCapabilities & 1100 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) 1101 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_EXTENDED].enabled = 1102 TRUE; 1103 1104 /* 1105 * Set flag if EEDP is supported and if TLR is supported. 1106 */ 1107 if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) 1108 sc->eedp_enabled = TRUE; 1109 if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) 1110 sc->control_TLR = TRUE; 1111 1112 /* 1113 * Size the queues. Since the reply queues always need one free entry, 1114 * we'll just deduct one reply message here. 1115 */ 1116 sc->num_reqs = MIN(MPS_REQ_FRAMES, sc->facts->RequestCredit); 1117 sc->num_replies = MIN(MPS_REPLY_FRAMES + MPS_EVT_REPLY_FRAMES, 1118 sc->facts->MaxReplyDescriptorPostQueueDepth) - 1; 1119 TAILQ_INIT(&sc->req_list); 1120 TAILQ_INIT(&sc->high_priority_req_list); 1121 TAILQ_INIT(&sc->chain_list); 1122 TAILQ_INIT(&sc->tm_list); 1123 1124 if (((error = mps_alloc_queues(sc)) != 0) || 1125 ((error = mps_alloc_replies(sc)) != 0) || 1126 ((error = mps_alloc_requests(sc)) != 0)) { 1127 mps_printf(sc, "%s failed to alloc\n", __func__); 1128 mps_free(sc); 1129 return (error); 1130 } 1131 1132 if (((error = mps_init_queues(sc)) != 0) || 1133 ((error = mps_transition_operational(sc)) != 0)) { 1134 mps_printf(sc, "%s failed to transition operational\n", __func__); 1135 mps_free(sc); 1136 return (error); 1137 } 1138 1139 /* 1140 * Finish the queue initialization. 1141 * These are set here instead of in mps_init_queues() because the 1142 * IOC resets these values during the state transition in 1143 * mps_transition_operational(). The free index is set to 1 1144 * because the corresponding index in the IOC is set to 0, and the 1145 * IOC treats the queues as full if both are set to the same value. 1146 * Hence the reason that the queue can't hold all of the possible 1147 * replies. 1148 */ 1149 sc->replypostindex = 0; 1150 mps_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex); 1151 mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 0); 1152 1153 sc->pfacts = kmalloc(sizeof(MPI2_PORT_FACTS_REPLY) * 1154 sc->facts->NumberOfPorts, M_MPT2, M_ZERO|M_WAITOK); 1155 for (i = 0; i < sc->facts->NumberOfPorts; i++) { 1156 if ((error = mps_get_portfacts(sc, &sc->pfacts[i], i)) != 0) { 1157 mps_printf(sc, "%s failed to get portfacts for port %d\n", 1158 __func__, i); 1159 mps_free(sc); 1160 return (error); 1161 } 1162 mps_print_portfacts(sc, &sc->pfacts[i]); 1163 } 1164 1165 /* Attach the subsystems so they can prepare their event masks. */ 1166 /* XXX Should be dynamic so that IM/IR and user modules can attach */ 1167 if (((error = mps_attach_log(sc)) != 0) || 1168 ((error = mps_attach_sas(sc)) != 0) || 1169 ((error = mps_attach_user(sc)) != 0)) { 1170 mps_printf(sc, "%s failed to attach all subsystems: error %d\n", 1171 __func__, error); 1172 mps_free(sc); 1173 return (error); 1174 } 1175 1176 if ((error = mps_pci_setup_interrupts(sc)) != 0) { 1177 mps_printf(sc, "%s failed to setup interrupts\n", __func__); 1178 mps_free(sc); 1179 return (error); 1180 } 1181 1182 /* 1183 * The static page function currently read is ioc page8. Others can be 1184 * added in future. 1185 */ 1186 mps_base_static_config_pages(sc); 1187 1188 /* Start the periodic watchdog check on the IOC Doorbell */ 1189 mps_periodic(sc); 1190 1191 /* 1192 * The portenable will kick off discovery events that will drive the 1193 * rest of the initialization process. The CAM/SAS module will 1194 * hold up the boot sequence until discovery is complete. 1195 */ 1196 sc->mps_ich.ich_func = mps_startup; 1197 sc->mps_ich.ich_arg = sc; 1198 if (config_intrhook_establish(&sc->mps_ich) != 0) { 1199 mps_dprint(sc, MPS_FAULT, "Cannot establish MPS config hook\n"); 1200 error = EINVAL; 1201 } 1202 1203 /* 1204 * Allow IR to shutdown gracefully when shutdown occurs. 1205 */ 1206 sc->shutdown_eh = EVENTHANDLER_REGISTER(shutdown_final, 1207 mpssas_ir_shutdown, sc, SHUTDOWN_PRI_DEFAULT); 1208 1209 if (sc->shutdown_eh == NULL) 1210 mps_dprint(sc, MPS_FAULT, "shutdown event registration " 1211 "failed\n"); 1212 1213 mps_setup_sysctl(sc); 1214 1215 sc->mps_flags |= MPS_FLAGS_ATTACH_DONE; 1216 1217 return (error); 1218 } 1219 1220 /* Run through any late-start handlers. */ 1221 static void 1222 mps_startup(void *arg) 1223 { 1224 struct mps_softc *sc; 1225 1226 sc = (struct mps_softc *)arg; 1227 1228 mps_lock(sc); 1229 mps_unmask_intr(sc); 1230 /* initialize device mapping tables */ 1231 mps_mapping_initialize(sc); 1232 mpssas_startup(sc); 1233 mps_unlock(sc); 1234 } 1235 1236 /* Periodic watchdog. Is called with the driver lock already held. */ 1237 static void 1238 mps_periodic(void *arg) 1239 { 1240 struct mps_softc *sc; 1241 uint32_t db; 1242 1243 sc = (struct mps_softc *)arg; 1244 mps_lock(sc); 1245 if (sc->mps_flags & MPS_FLAGS_SHUTDOWN) { 1246 mps_unlock(sc); 1247 return; 1248 } 1249 1250 db = mps_regread(sc, MPI2_DOORBELL_OFFSET); 1251 if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { 1252 device_printf(sc->mps_dev, "IOC Fault 0x%08x, Resetting\n", db); 1253 1254 mps_reinit(sc); 1255 } 1256 1257 callout_reset(&sc->periodic, MPS_PERIODIC_DELAY * hz, mps_periodic, sc); 1258 mps_unlock(sc); 1259 } 1260 1261 static void 1262 mps_log_evt_handler(struct mps_softc *sc, uintptr_t data, 1263 MPI2_EVENT_NOTIFICATION_REPLY *event) 1264 { 1265 MPI2_EVENT_DATA_LOG_ENTRY_ADDED *entry; 1266 1267 mps_print_event(sc, event); 1268 1269 switch (event->Event) { 1270 case MPI2_EVENT_LOG_DATA: 1271 device_printf(sc->mps_dev, "MPI2_EVENT_LOG_DATA:\n"); 1272 hexdump(event->EventData, event->EventDataLength, NULL, 0); 1273 break; 1274 case MPI2_EVENT_LOG_ENTRY_ADDED: 1275 entry = (MPI2_EVENT_DATA_LOG_ENTRY_ADDED *)event->EventData; 1276 mps_dprint(sc, MPS_INFO, "MPI2_EVENT_LOG_ENTRY_ADDED event " 1277 "0x%x Sequence %d:\n", entry->LogEntryQualifier, 1278 entry->LogSequence); 1279 break; 1280 default: 1281 break; 1282 } 1283 return; 1284 } 1285 1286 static int 1287 mps_attach_log(struct mps_softc *sc) 1288 { 1289 uint8_t events[16]; 1290 1291 bzero(events, 16); 1292 setbit(events, MPI2_EVENT_LOG_DATA); 1293 setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED); 1294 1295 mps_register_events(sc, events, mps_log_evt_handler, NULL, 1296 &sc->mps_log_eh); 1297 1298 return (0); 1299 } 1300 1301 static int 1302 mps_detach_log(struct mps_softc *sc) 1303 { 1304 1305 if (sc->mps_log_eh != NULL) 1306 mps_deregister_events(sc, sc->mps_log_eh); 1307 return (0); 1308 } 1309 1310 /* 1311 * Free all of the driver resources and detach submodules. Should be called 1312 * without the lock held. 1313 */ 1314 int 1315 mps_free(struct mps_softc *sc) 1316 { 1317 struct mps_command *cm; 1318 int i, error; 1319 1320 /* Turn off the watchdog */ 1321 mps_lock(sc); 1322 sc->mps_flags |= MPS_FLAGS_SHUTDOWN; 1323 mps_unlock(sc); 1324 #if 0 /* XXX swildner */ 1325 /* Lock must not be held for this */ 1326 callout_drain(&sc->periodic); 1327 #else 1328 callout_stop(&sc->periodic); 1329 #endif 1330 1331 if (((error = mps_detach_log(sc)) != 0) || 1332 ((error = mps_detach_sas(sc)) != 0)) 1333 return (error); 1334 1335 /* Put the IOC back in the READY state. */ 1336 mps_lock(sc); 1337 if ((error = mps_transition_ready(sc)) != 0) { 1338 mps_unlock(sc); 1339 return (error); 1340 } 1341 mps_unlock(sc); 1342 1343 if (sc->facts != NULL) 1344 kfree(sc->facts, M_MPT2); 1345 1346 if (sc->pfacts != NULL) 1347 kfree(sc->pfacts, M_MPT2); 1348 1349 if (sc->post_busaddr != 0) 1350 bus_dmamap_unload(sc->queues_dmat, sc->queues_map); 1351 if (sc->post_queue != NULL) 1352 bus_dmamem_free(sc->queues_dmat, sc->post_queue, 1353 sc->queues_map); 1354 if (sc->queues_dmat != NULL) 1355 bus_dma_tag_destroy(sc->queues_dmat); 1356 1357 if (sc->chain_busaddr != 0) 1358 bus_dmamap_unload(sc->chain_dmat, sc->chain_map); 1359 if (sc->chain_frames != NULL) 1360 bus_dmamem_free(sc->chain_dmat, sc->chain_frames,sc->chain_map); 1361 if (sc->chain_dmat != NULL) 1362 bus_dma_tag_destroy(sc->chain_dmat); 1363 1364 if (sc->sense_busaddr != 0) 1365 bus_dmamap_unload(sc->sense_dmat, sc->sense_map); 1366 if (sc->sense_frames != NULL) 1367 bus_dmamem_free(sc->sense_dmat, sc->sense_frames,sc->sense_map); 1368 if (sc->sense_dmat != NULL) 1369 bus_dma_tag_destroy(sc->sense_dmat); 1370 1371 if (sc->reply_busaddr != 0) 1372 bus_dmamap_unload(sc->reply_dmat, sc->reply_map); 1373 if (sc->reply_frames != NULL) 1374 bus_dmamem_free(sc->reply_dmat, sc->reply_frames,sc->reply_map); 1375 if (sc->reply_dmat != NULL) 1376 bus_dma_tag_destroy(sc->reply_dmat); 1377 1378 if (sc->req_busaddr != 0) 1379 bus_dmamap_unload(sc->req_dmat, sc->req_map); 1380 if (sc->req_frames != NULL) 1381 bus_dmamem_free(sc->req_dmat, sc->req_frames, sc->req_map); 1382 if (sc->req_dmat != NULL) 1383 bus_dma_tag_destroy(sc->req_dmat); 1384 1385 if (sc->chains != NULL) 1386 kfree(sc->chains, M_MPT2); 1387 if (sc->commands != NULL) { 1388 for (i = 1; i < sc->num_reqs; i++) { 1389 cm = &sc->commands[i]; 1390 bus_dmamap_destroy(sc->buffer_dmat, cm->cm_dmamap); 1391 } 1392 kfree(sc->commands, M_MPT2); 1393 } 1394 if (sc->buffer_dmat != NULL) 1395 bus_dma_tag_destroy(sc->buffer_dmat); 1396 1397 if (sc->sysctl_tree != NULL) 1398 sysctl_ctx_free(&sc->sysctl_ctx); 1399 1400 mps_mapping_free_memory(sc); 1401 1402 /* Deregister the shutdown function */ 1403 if (sc->shutdown_eh != NULL) 1404 EVENTHANDLER_DEREGISTER(shutdown_final, sc->shutdown_eh); 1405 1406 lockuninit(&sc->mps_lock); 1407 1408 return (0); 1409 } 1410 1411 static __inline void 1412 mps_complete_command(struct mps_command *cm) 1413 { 1414 if (cm->cm_flags & MPS_CM_FLAGS_POLLED) 1415 cm->cm_flags |= MPS_CM_FLAGS_COMPLETE; 1416 1417 if (cm->cm_complete != NULL) { 1418 mps_dprint(cm->cm_sc, MPS_TRACE, 1419 "%s cm %p calling cm_complete %p data %p reply %p\n", 1420 __func__, cm, cm->cm_complete, cm->cm_complete_data, 1421 cm->cm_reply); 1422 cm->cm_complete(cm->cm_sc, cm); 1423 } 1424 1425 if (cm->cm_flags & MPS_CM_FLAGS_WAKEUP) { 1426 mps_dprint(cm->cm_sc, MPS_TRACE, "%s: waking up %p\n", 1427 __func__, cm); 1428 wakeup(cm); 1429 } 1430 1431 if (cm->cm_sc->io_cmds_active != 0) { 1432 cm->cm_sc->io_cmds_active--; 1433 } else { 1434 mps_dprint(cm->cm_sc, MPS_INFO, "Warning: io_cmds_active is " 1435 "out of sync - resynching to 0\n"); 1436 } 1437 } 1438 1439 void 1440 mps_intr(void *data) 1441 { 1442 struct mps_softc *sc; 1443 uint32_t status; 1444 1445 sc = (struct mps_softc *)data; 1446 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1447 1448 /* 1449 * Check interrupt status register to flush the bus. This is 1450 * needed for both INTx interrupts and driver-driven polling 1451 */ 1452 status = mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); 1453 if ((status & MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT) == 0) 1454 return; 1455 1456 mps_lock(sc); 1457 mps_intr_locked(data); 1458 mps_unlock(sc); 1459 return; 1460 } 1461 1462 /* 1463 * In theory, MSI/MSIX interrupts shouldn't need to read any registers on the 1464 * chip. Hopefully this theory is correct. 1465 */ 1466 void 1467 mps_intr_msi(void *data) 1468 { 1469 struct mps_softc *sc; 1470 1471 sc = (struct mps_softc *)data; 1472 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1473 mps_lock(sc); 1474 mps_intr_locked(data); 1475 mps_unlock(sc); 1476 return; 1477 } 1478 1479 /* 1480 * The locking is overly broad and simplistic, but easy to deal with for now. 1481 */ 1482 void 1483 mps_intr_locked(void *data) 1484 { 1485 MPI2_REPLY_DESCRIPTORS_UNION *desc; 1486 struct mps_softc *sc; 1487 struct mps_command *cm = NULL; 1488 uint8_t flags; 1489 u_int pq; 1490 MPI2_DIAG_RELEASE_REPLY *rel_rep; 1491 mps_fw_diagnostic_buffer_t *pBuffer; 1492 1493 sc = (struct mps_softc *)data; 1494 1495 pq = sc->replypostindex; 1496 mps_dprint(sc, MPS_TRACE, 1497 "%s sc %p starting with replypostindex %u\n", 1498 __func__, sc, sc->replypostindex); 1499 1500 for ( ;; ) { 1501 cm = NULL; 1502 desc = &sc->post_queue[sc->replypostindex]; 1503 flags = desc->Default.ReplyFlags & 1504 MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; 1505 if ((flags == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) 1506 || (desc->Words.High == 0xffffffff)) 1507 break; 1508 1509 /* increment the replypostindex now, so that event handlers 1510 * and cm completion handlers which decide to do a diag 1511 * reset can zero it without it getting incremented again 1512 * afterwards, and we break out of this loop on the next 1513 * iteration since the reply post queue has been cleared to 1514 * 0xFF and all descriptors look unused (which they are). 1515 */ 1516 if (++sc->replypostindex >= sc->pqdepth) 1517 sc->replypostindex = 0; 1518 1519 switch (flags) { 1520 case MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS: 1521 cm = &sc->commands[desc->SCSIIOSuccess.SMID]; 1522 cm->cm_reply = NULL; 1523 break; 1524 case MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY: 1525 { 1526 uint32_t baddr; 1527 uint8_t *reply; 1528 1529 /* 1530 * Re-compose the reply address from the address 1531 * sent back from the chip. The ReplyFrameAddress 1532 * is the lower 32 bits of the physical address of 1533 * particular reply frame. Convert that address to 1534 * host format, and then use that to provide the 1535 * offset against the virtual address base 1536 * (sc->reply_frames). 1537 */ 1538 baddr = le32toh(desc->AddressReply.ReplyFrameAddress); 1539 reply = sc->reply_frames + 1540 (baddr - ((uint32_t)sc->reply_busaddr)); 1541 /* 1542 * Make sure the reply we got back is in a valid 1543 * range. If not, go ahead and panic here, since 1544 * we'll probably panic as soon as we deference the 1545 * reply pointer anyway. 1546 */ 1547 if ((reply < sc->reply_frames) 1548 || (reply > (sc->reply_frames + 1549 (sc->fqdepth * sc->facts->ReplyFrameSize * 4)))) { 1550 kprintf("%s: WARNING: reply %p out of range!\n", 1551 __func__, reply); 1552 kprintf("%s: reply_frames %p, fqdepth %d, " 1553 "frame size %d\n", __func__, 1554 sc->reply_frames, sc->fqdepth, 1555 sc->facts->ReplyFrameSize * 4); 1556 kprintf("%s: baddr %#x,\n", __func__, baddr); 1557 panic("Reply address out of range"); 1558 } 1559 if (desc->AddressReply.SMID == 0) { 1560 if (((MPI2_DEFAULT_REPLY *)reply)->Function == 1561 MPI2_FUNCTION_DIAG_BUFFER_POST) { 1562 /* 1563 * If SMID is 0 for Diag Buffer Post, 1564 * this implies that the reply is due to 1565 * a release function with a status that 1566 * the buffer has been released. Set 1567 * the buffer flags accordingly. 1568 */ 1569 rel_rep = 1570 (MPI2_DIAG_RELEASE_REPLY *)reply; 1571 if (rel_rep->IOCStatus == 1572 MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED) 1573 { 1574 pBuffer = 1575 &sc->fw_diag_buffer_list[ 1576 rel_rep->BufferType]; 1577 pBuffer->valid_data = TRUE; 1578 pBuffer->owned_by_firmware = 1579 FALSE; 1580 pBuffer->immediate = FALSE; 1581 } 1582 } else 1583 mps_dispatch_event(sc, baddr, 1584 (MPI2_EVENT_NOTIFICATION_REPLY *) 1585 reply); 1586 } else { 1587 cm = &sc->commands[desc->AddressReply.SMID]; 1588 cm->cm_reply = reply; 1589 cm->cm_reply_data = 1590 desc->AddressReply.ReplyFrameAddress; 1591 } 1592 break; 1593 } 1594 case MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS: 1595 case MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER: 1596 case MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS: 1597 default: 1598 /* Unhandled */ 1599 device_printf(sc->mps_dev, "Unhandled reply 0x%x\n", 1600 desc->Default.ReplyFlags); 1601 cm = NULL; 1602 break; 1603 } 1604 1605 if (cm != NULL) 1606 mps_complete_command(cm); 1607 1608 desc->Words.Low = 0xffffffff; 1609 desc->Words.High = 0xffffffff; 1610 } 1611 1612 if (pq != sc->replypostindex) { 1613 mps_dprint(sc, MPS_TRACE, 1614 "%s sc %p writing postindex %d\n", 1615 __func__, sc, sc->replypostindex); 1616 mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, sc->replypostindex); 1617 } 1618 1619 return; 1620 } 1621 1622 static void 1623 mps_dispatch_event(struct mps_softc *sc, uintptr_t data, 1624 MPI2_EVENT_NOTIFICATION_REPLY *reply) 1625 { 1626 struct mps_event_handle *eh; 1627 int event, handled = 0; 1628 1629 event = reply->Event; 1630 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 1631 if (isset(eh->mask, event)) { 1632 eh->callback(sc, data, reply); 1633 handled++; 1634 } 1635 } 1636 1637 if (handled == 0) 1638 device_printf(sc->mps_dev, "Unhandled event 0x%x\n", event); 1639 1640 /* 1641 * This is the only place that the event/reply should be freed. 1642 * Anything wanting to hold onto the event data should have 1643 * already copied it into their own storage. 1644 */ 1645 mps_free_reply(sc, data); 1646 } 1647 1648 static void 1649 mps_reregister_events_complete(struct mps_softc *sc, struct mps_command *cm) 1650 { 1651 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1652 1653 if (cm->cm_reply) 1654 mps_print_event(sc, 1655 (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply); 1656 1657 mps_free_command(sc, cm); 1658 1659 /* next, send a port enable */ 1660 mpssas_startup(sc); 1661 } 1662 1663 /* 1664 * For both register_events and update_events, the caller supplies a bitmap 1665 * of events that it _wants_. These functions then turn that into a bitmask 1666 * suitable for the controller. 1667 */ 1668 int 1669 mps_register_events(struct mps_softc *sc, uint8_t *mask, 1670 mps_evt_callback_t *cb, void *data, struct mps_event_handle **handle) 1671 { 1672 struct mps_event_handle *eh; 1673 int error = 0; 1674 1675 eh = kmalloc(sizeof(struct mps_event_handle), M_MPT2, M_WAITOK|M_ZERO); 1676 eh->callback = cb; 1677 eh->data = data; 1678 TAILQ_INSERT_TAIL(&sc->event_list, eh, eh_list); 1679 if (mask != NULL) 1680 error = mps_update_events(sc, eh, mask); 1681 *handle = eh; 1682 1683 return (error); 1684 } 1685 1686 int 1687 mps_update_events(struct mps_softc *sc, struct mps_event_handle *handle, 1688 uint8_t *mask) 1689 { 1690 MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; 1691 MPI2_EVENT_NOTIFICATION_REPLY *reply; 1692 struct mps_command *cm; 1693 struct mps_event_handle *eh; 1694 int error, i; 1695 1696 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1697 1698 if ((mask != NULL) && (handle != NULL)) 1699 bcopy(mask, &handle->mask[0], 16); 1700 memset(sc->event_mask, 0xff, 16); 1701 1702 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 1703 for (i = 0; i < 16; i++) 1704 sc->event_mask[i] &= ~eh->mask[i]; 1705 } 1706 1707 if ((cm = mps_alloc_command(sc)) == NULL) 1708 return (EBUSY); 1709 evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; 1710 evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; 1711 evtreq->MsgFlags = 0; 1712 evtreq->SASBroadcastPrimitiveMasks = 0; 1713 #ifdef MPS_DEBUG_ALL_EVENTS 1714 { 1715 u_char fullmask[16]; 1716 memset(fullmask, 0x00, 16); 1717 bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16); 1718 } 1719 #else 1720 bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16); 1721 #endif 1722 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 1723 cm->cm_data = NULL; 1724 1725 error = mps_request_polled(sc, cm); 1726 reply = (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply; 1727 if ((reply == NULL) || 1728 (reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) 1729 error = ENXIO; 1730 mps_print_event(sc, reply); 1731 mps_dprint(sc, MPS_TRACE, "%s finished error %d\n", __func__, error); 1732 1733 mps_free_command(sc, cm); 1734 return (error); 1735 } 1736 1737 static int 1738 mps_reregister_events(struct mps_softc *sc) 1739 { 1740 MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; 1741 struct mps_command *cm; 1742 struct mps_event_handle *eh; 1743 int error, i; 1744 1745 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1746 1747 /* first, reregister events */ 1748 1749 memset(sc->event_mask, 0xff, 16); 1750 1751 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 1752 for (i = 0; i < 16; i++) 1753 sc->event_mask[i] &= ~eh->mask[i]; 1754 } 1755 1756 if ((cm = mps_alloc_command(sc)) == NULL) 1757 return (EBUSY); 1758 evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; 1759 evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; 1760 evtreq->MsgFlags = 0; 1761 evtreq->SASBroadcastPrimitiveMasks = 0; 1762 #ifdef MPS_DEBUG_ALL_EVENTS 1763 { 1764 u_char fullmask[16]; 1765 memset(fullmask, 0x00, 16); 1766 bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16); 1767 } 1768 #else 1769 bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16); 1770 #endif 1771 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 1772 cm->cm_data = NULL; 1773 cm->cm_complete = mps_reregister_events_complete; 1774 1775 error = mps_map_command(sc, cm); 1776 1777 mps_dprint(sc, MPS_TRACE, "%s finished with error %d\n", __func__, error); 1778 return (error); 1779 } 1780 1781 int 1782 mps_deregister_events(struct mps_softc *sc, struct mps_event_handle *handle) 1783 { 1784 1785 TAILQ_REMOVE(&sc->event_list, handle, eh_list); 1786 kfree(handle, M_MPT2); 1787 return (mps_update_events(sc, NULL, NULL)); 1788 } 1789 1790 /* 1791 * Add a chain element as the next SGE for the specified command. 1792 * Reset cm_sge and cm_sgesize to indicate all the available space. 1793 */ 1794 static int 1795 mps_add_chain(struct mps_command *cm) 1796 { 1797 MPI2_SGE_CHAIN32 *sgc; 1798 struct mps_chain *chain; 1799 int space; 1800 1801 if (cm->cm_sglsize < MPS_SGC_SIZE) 1802 panic("MPS: Need SGE Error Code"); 1803 1804 chain = mps_alloc_chain(cm->cm_sc); 1805 if (chain == NULL) 1806 return (ENOBUFS); 1807 1808 space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4; 1809 1810 /* 1811 * Note: a double-linked list is used to make it easier to 1812 * walk for debugging. 1813 */ 1814 TAILQ_INSERT_TAIL(&cm->cm_chain_list, chain, chain_link); 1815 1816 sgc = (MPI2_SGE_CHAIN32 *)&cm->cm_sge->MpiChain; 1817 sgc->Length = space; 1818 sgc->NextChainOffset = 0; 1819 sgc->Flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT; 1820 sgc->Address = chain->chain_busaddr; 1821 1822 cm->cm_sge = (MPI2_SGE_IO_UNION *)&chain->chain->MpiSimple; 1823 cm->cm_sglsize = space; 1824 return (0); 1825 } 1826 1827 /* 1828 * Add one scatter-gather element (chain, simple, transaction context) 1829 * to the scatter-gather list for a command. Maintain cm_sglsize and 1830 * cm_sge as the remaining size and pointer to the next SGE to fill 1831 * in, respectively. 1832 */ 1833 int 1834 mps_push_sge(struct mps_command *cm, void *sgep, size_t len, int segsleft) 1835 { 1836 MPI2_SGE_TRANSACTION_UNION *tc = sgep; 1837 MPI2_SGE_SIMPLE64 *sge = sgep; 1838 int error, type; 1839 uint32_t saved_buf_len, saved_address_low, saved_address_high; 1840 1841 type = (tc->Flags & MPI2_SGE_FLAGS_ELEMENT_MASK); 1842 1843 #ifdef INVARIANTS 1844 switch (type) { 1845 case MPI2_SGE_FLAGS_TRANSACTION_ELEMENT: { 1846 if (len != tc->DetailsLength + 4) 1847 panic("TC %p length %u or %zu?", tc, 1848 tc->DetailsLength + 4, len); 1849 } 1850 break; 1851 case MPI2_SGE_FLAGS_CHAIN_ELEMENT: 1852 /* Driver only uses 32-bit chain elements */ 1853 if (len != MPS_SGC_SIZE) 1854 panic("CHAIN %p length %u or %zu?", sgep, 1855 MPS_SGC_SIZE, len); 1856 break; 1857 case MPI2_SGE_FLAGS_SIMPLE_ELEMENT: 1858 /* Driver only uses 64-bit SGE simple elements */ 1859 sge = sgep; 1860 if (len != MPS_SGE64_SIZE) 1861 panic("SGE simple %p length %u or %zu?", sge, 1862 MPS_SGE64_SIZE, len); 1863 if (((sge->FlagsLength >> MPI2_SGE_FLAGS_SHIFT) & 1864 MPI2_SGE_FLAGS_ADDRESS_SIZE) == 0) 1865 panic("SGE simple %p flags %02x not marked 64-bit?", 1866 sge, sge->FlagsLength >> MPI2_SGE_FLAGS_SHIFT); 1867 1868 break; 1869 default: 1870 panic("Unexpected SGE %p, flags %02x", tc, tc->Flags); 1871 } 1872 #endif 1873 1874 /* 1875 * case 1: 1 more segment, enough room for it 1876 * case 2: 2 more segments, enough room for both 1877 * case 3: >=2 more segments, only enough room for 1 and a chain 1878 * case 4: >=1 more segment, enough room for only a chain 1879 * case 5: >=1 more segment, no room for anything (error) 1880 */ 1881 1882 /* 1883 * There should be room for at least a chain element, or this 1884 * code is buggy. Case (5). 1885 */ 1886 if (cm->cm_sglsize < MPS_SGC_SIZE) 1887 panic("MPS: Need SGE Error Code"); 1888 1889 if (segsleft >= 2 && 1890 cm->cm_sglsize >= len + MPS_SGC_SIZE && 1891 cm->cm_sglsize < len + MPS_SGC_SIZE + MPS_SGE64_SIZE) { 1892 /* 1893 * There are 2 or more segments left to add, and only 1894 * enough room for 1 and a chain. Case (3). 1895 * 1896 * Mark as last element in this chain if necessary. 1897 */ 1898 if (type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) { 1899 sge->FlagsLength |= 1900 (MPI2_SGE_FLAGS_LAST_ELEMENT << MPI2_SGE_FLAGS_SHIFT); 1901 } 1902 1903 /* 1904 * Add the item then a chain. Do the chain now, 1905 * rather than on the next iteration, to simplify 1906 * understanding the code. 1907 */ 1908 cm->cm_sglsize -= len; 1909 bcopy(sgep, cm->cm_sge, len); 1910 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); 1911 return (mps_add_chain(cm)); 1912 } 1913 1914 if (segsleft >= 1 && cm->cm_sglsize < len + MPS_SGC_SIZE) { 1915 /* 1916 * 1 or more segment, enough room for only a chain. 1917 * Hope the previous element wasn't a Simple entry 1918 * that needed to be marked with 1919 * MPI2_SGE_FLAGS_LAST_ELEMENT. Case (4). 1920 */ 1921 if ((error = mps_add_chain(cm)) != 0) 1922 return (error); 1923 } 1924 1925 #ifdef INVARIANTS 1926 /* Case 1: 1 more segment, enough room for it. */ 1927 if (segsleft == 1 && cm->cm_sglsize < len) 1928 panic("1 seg left and no room? %u versus %zu", 1929 cm->cm_sglsize, len); 1930 1931 /* Case 2: 2 more segments, enough room for both */ 1932 if (segsleft == 2 && cm->cm_sglsize < len + MPS_SGE64_SIZE) 1933 panic("2 segs left and no room? %u versus %zu", 1934 cm->cm_sglsize, len); 1935 #endif 1936 1937 if (segsleft == 1 && type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) { 1938 /* 1939 * If this is a bi-directional request, need to account for that 1940 * here. Save the pre-filled sge values. These will be used 1941 * either for the 2nd SGL or for a single direction SGL. If 1942 * cm_out_len is non-zero, this is a bi-directional request, so 1943 * fill in the OUT SGL first, then the IN SGL, otherwise just 1944 * fill in the IN SGL. Note that at this time, when filling in 1945 * 2 SGL's for a bi-directional request, they both use the same 1946 * DMA buffer (same cm command). 1947 */ 1948 saved_buf_len = sge->FlagsLength & 0x00FFFFFF; 1949 saved_address_low = sge->Address.Low; 1950 saved_address_high = sge->Address.High; 1951 if (cm->cm_out_len) { 1952 sge->FlagsLength = cm->cm_out_len | 1953 ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 1954 MPI2_SGE_FLAGS_END_OF_BUFFER | 1955 MPI2_SGE_FLAGS_HOST_TO_IOC | 1956 MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << 1957 MPI2_SGE_FLAGS_SHIFT); 1958 cm->cm_sglsize -= len; 1959 bcopy(sgep, cm->cm_sge, len); 1960 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge 1961 + len); 1962 } 1963 sge->FlagsLength = saved_buf_len | 1964 ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 1965 MPI2_SGE_FLAGS_END_OF_BUFFER | 1966 MPI2_SGE_FLAGS_LAST_ELEMENT | 1967 MPI2_SGE_FLAGS_END_OF_LIST | 1968 MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << 1969 MPI2_SGE_FLAGS_SHIFT); 1970 if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) { 1971 sge->FlagsLength |= 1972 ((uint32_t)(MPI2_SGE_FLAGS_IOC_TO_HOST) << 1973 MPI2_SGE_FLAGS_SHIFT); 1974 } else { 1975 sge->FlagsLength |= 1976 ((uint32_t)(MPI2_SGE_FLAGS_HOST_TO_IOC) << 1977 MPI2_SGE_FLAGS_SHIFT); 1978 } 1979 sge->Address.Low = saved_address_low; 1980 sge->Address.High = saved_address_high; 1981 } 1982 1983 cm->cm_sglsize -= len; 1984 bcopy(sgep, cm->cm_sge, len); 1985 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); 1986 return (0); 1987 } 1988 1989 /* 1990 * Add one dma segment to the scatter-gather list for a command. 1991 */ 1992 int 1993 mps_add_dmaseg(struct mps_command *cm, vm_paddr_t pa, size_t len, u_int flags, 1994 int segsleft) 1995 { 1996 MPI2_SGE_SIMPLE64 sge; 1997 1998 /* 1999 * This driver always uses 64-bit address elements for simplicity. 2000 */ 2001 flags |= MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 2002 MPI2_SGE_FLAGS_64_BIT_ADDRESSING; 2003 sge.FlagsLength = len | (flags << MPI2_SGE_FLAGS_SHIFT); 2004 mps_from_u64(pa, &sge.Address); 2005 2006 return (mps_push_sge(cm, &sge, sizeof sge, segsleft)); 2007 } 2008 2009 static void 2010 mps_data_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 2011 { 2012 struct mps_softc *sc; 2013 struct mps_command *cm; 2014 u_int i, dir, sflags; 2015 2016 cm = (struct mps_command *)arg; 2017 sc = cm->cm_sc; 2018 2019 /* 2020 * In this case, just print out a warning and let the chip tell the 2021 * user they did the wrong thing. 2022 */ 2023 if ((cm->cm_max_segs != 0) && (nsegs > cm->cm_max_segs)) { 2024 mps_printf(sc, "%s: warning: busdma returned %d segments, " 2025 "more than the %d allowed\n", __func__, nsegs, 2026 cm->cm_max_segs); 2027 } 2028 2029 /* 2030 * Set up DMA direction flags. Bi-directional requests are also handled 2031 * here. In that case, both direction flags will be set. 2032 */ 2033 sflags = 0; 2034 if (cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) { 2035 /* 2036 * We have to add a special case for SMP passthrough, there 2037 * is no easy way to generically handle it. The first 2038 * S/G element is used for the command (therefore the 2039 * direction bit needs to be set). The second one is used 2040 * for the reply. We'll leave it to the caller to make 2041 * sure we only have two buffers. 2042 */ 2043 /* 2044 * Even though the busdma man page says it doesn't make 2045 * sense to have both direction flags, it does in this case. 2046 * We have one s/g element being accessed in each direction. 2047 */ 2048 dir = BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD; 2049 2050 /* 2051 * Set the direction flag on the first buffer in the SMP 2052 * passthrough request. We'll clear it for the second one. 2053 */ 2054 sflags |= MPI2_SGE_FLAGS_DIRECTION | 2055 MPI2_SGE_FLAGS_END_OF_BUFFER; 2056 } else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT) { 2057 sflags |= MPI2_SGE_FLAGS_HOST_TO_IOC; 2058 dir = BUS_DMASYNC_PREWRITE; 2059 } else 2060 dir = BUS_DMASYNC_PREREAD; 2061 2062 for (i = 0; i < nsegs; i++) { 2063 if ((cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) && (i != 0)) { 2064 sflags &= ~MPI2_SGE_FLAGS_DIRECTION; 2065 } 2066 error = mps_add_dmaseg(cm, segs[i].ds_addr, segs[i].ds_len, 2067 sflags, nsegs - i); 2068 if (error != 0) { 2069 /* Resource shortage, roll back! */ 2070 mps_dprint(sc, MPS_INFO, "out of chain frames\n"); 2071 cm->cm_flags |= MPS_CM_FLAGS_CHAIN_FAILED; 2072 mps_complete_command(cm); 2073 return; 2074 } 2075 } 2076 2077 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir); 2078 mps_enqueue_request(sc, cm); 2079 2080 return; 2081 } 2082 2083 static void 2084 mps_data_cb2(void *arg, bus_dma_segment_t *segs, int nsegs, bus_size_t mapsize, 2085 int error) 2086 { 2087 mps_data_cb(arg, segs, nsegs, error); 2088 } 2089 2090 /* 2091 * This is the routine to enqueue commands ansynchronously. 2092 * Note that the only error path here is from bus_dmamap_load(), which can 2093 * return EINPROGRESS if it is waiting for resources. Other than this, it's 2094 * assumed that if you have a command in-hand, then you have enough credits 2095 * to use it. 2096 */ 2097 int 2098 mps_map_command(struct mps_softc *sc, struct mps_command *cm) 2099 { 2100 MPI2_SGE_SIMPLE32 *sge; 2101 int error = 0; 2102 2103 if (cm->cm_flags & MPS_CM_FLAGS_USE_UIO) { 2104 error = bus_dmamap_load_uio(sc->buffer_dmat, cm->cm_dmamap, 2105 &cm->cm_uio, mps_data_cb2, cm, 0); 2106 } else if ((cm->cm_data != NULL) && (cm->cm_length != 0)) { 2107 error = bus_dmamap_load(sc->buffer_dmat, cm->cm_dmamap, 2108 cm->cm_data, cm->cm_length, mps_data_cb, cm, 0); 2109 } else { 2110 /* Add a zero-length element as needed */ 2111 if (cm->cm_sge != NULL) { 2112 sge = (MPI2_SGE_SIMPLE32 *)cm->cm_sge; 2113 sge->FlagsLength = (MPI2_SGE_FLAGS_LAST_ELEMENT | 2114 MPI2_SGE_FLAGS_END_OF_BUFFER | 2115 MPI2_SGE_FLAGS_END_OF_LIST | 2116 MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << 2117 MPI2_SGE_FLAGS_SHIFT; 2118 sge->Address = 0; 2119 } 2120 mps_enqueue_request(sc, cm); 2121 } 2122 2123 return (error); 2124 } 2125 2126 /* 2127 * This is the routine to enqueue commands synchronously. An error of 2128 * EINPROGRESS from mps_map_command() is ignored since the command will 2129 * be executed and enqueued automatically. Other errors come from msleep(). 2130 */ 2131 int 2132 mps_wait_command(struct mps_softc *sc, struct mps_command *cm, int timeout) 2133 { 2134 int error; 2135 2136 KKASSERT(lockstatus(&sc->mps_lock, curthread) != 0); 2137 2138 cm->cm_complete = NULL; 2139 cm->cm_flags |= MPS_CM_FLAGS_WAKEUP; 2140 error = mps_map_command(sc, cm); 2141 if ((error != 0) && (error != EINPROGRESS)) 2142 return (error); 2143 error = lksleep(cm, &sc->mps_lock, 0, "mpswait", timeout); 2144 if (error == EWOULDBLOCK) 2145 error = ETIMEDOUT; 2146 return (error); 2147 } 2148 2149 /* 2150 * This is the routine to enqueue a command synchonously and poll for 2151 * completion. Its use should be rare. 2152 */ 2153 int 2154 mps_request_polled(struct mps_softc *sc, struct mps_command *cm) 2155 { 2156 int error, timeout = 0; 2157 2158 error = 0; 2159 2160 cm->cm_flags |= MPS_CM_FLAGS_POLLED; 2161 cm->cm_complete = NULL; 2162 mps_map_command(sc, cm); 2163 2164 while ((cm->cm_flags & MPS_CM_FLAGS_COMPLETE) == 0) { 2165 mps_intr_locked(sc); 2166 DELAY(50 * 1000); 2167 if (timeout++ > 1000) { 2168 mps_dprint(sc, MPS_FAULT, "polling failed\n"); 2169 error = ETIMEDOUT; 2170 break; 2171 } 2172 } 2173 2174 return (error); 2175 } 2176 2177 /* 2178 * The MPT driver had a verbose interface for config pages. In this driver, 2179 * reduce it to much simplier terms, similar to the Linux driver. 2180 */ 2181 int 2182 mps_read_config_page(struct mps_softc *sc, struct mps_config_params *params) 2183 { 2184 MPI2_CONFIG_REQUEST *req; 2185 struct mps_command *cm; 2186 int error; 2187 2188 if (sc->mps_flags & MPS_FLAGS_BUSY) { 2189 return (EBUSY); 2190 } 2191 2192 cm = mps_alloc_command(sc); 2193 if (cm == NULL) { 2194 return (EBUSY); 2195 } 2196 2197 req = (MPI2_CONFIG_REQUEST *)cm->cm_req; 2198 req->Function = MPI2_FUNCTION_CONFIG; 2199 req->Action = params->action; 2200 req->SGLFlags = 0; 2201 req->ChainOffset = 0; 2202 req->PageAddress = params->page_address; 2203 if (params->hdr.Ext.ExtPageType != 0) { 2204 MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr; 2205 2206 hdr = ¶ms->hdr.Ext; 2207 req->ExtPageType = hdr->ExtPageType; 2208 req->ExtPageLength = hdr->ExtPageLength; 2209 req->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; 2210 req->Header.PageLength = 0; /* Must be set to zero */ 2211 req->Header.PageNumber = hdr->PageNumber; 2212 req->Header.PageVersion = hdr->PageVersion; 2213 } else { 2214 MPI2_CONFIG_PAGE_HEADER *hdr; 2215 2216 hdr = ¶ms->hdr.Struct; 2217 req->Header.PageType = hdr->PageType; 2218 req->Header.PageNumber = hdr->PageNumber; 2219 req->Header.PageLength = hdr->PageLength; 2220 req->Header.PageVersion = hdr->PageVersion; 2221 } 2222 2223 cm->cm_data = params->buffer; 2224 cm->cm_length = params->length; 2225 cm->cm_sge = &req->PageBufferSGE; 2226 cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); 2227 cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; 2228 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 2229 2230 cm->cm_complete_data = params; 2231 if (params->callback != NULL) { 2232 cm->cm_complete = mps_config_complete; 2233 return (mps_map_command(sc, cm)); 2234 } else { 2235 error = mps_wait_command(sc, cm, 0); 2236 if (error) { 2237 mps_dprint(sc, MPS_FAULT, 2238 "Error %d reading config page\n", error); 2239 mps_free_command(sc, cm); 2240 return (error); 2241 } 2242 mps_config_complete(sc, cm); 2243 } 2244 2245 return (0); 2246 } 2247 2248 int 2249 mps_write_config_page(struct mps_softc *sc, struct mps_config_params *params) 2250 { 2251 return (EINVAL); 2252 } 2253 2254 static void 2255 mps_config_complete(struct mps_softc *sc, struct mps_command *cm) 2256 { 2257 MPI2_CONFIG_REPLY *reply; 2258 struct mps_config_params *params; 2259 2260 params = cm->cm_complete_data; 2261 2262 if (cm->cm_data != NULL) { 2263 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, 2264 BUS_DMASYNC_POSTREAD); 2265 bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap); 2266 } 2267 2268 /* 2269 * XXX KDM need to do more error recovery? This results in the 2270 * device in question not getting probed. 2271 */ 2272 if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) { 2273 params->status = MPI2_IOCSTATUS_BUSY; 2274 goto done; 2275 } 2276 2277 reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; 2278 if (reply == NULL) { 2279 params->status = MPI2_IOCSTATUS_BUSY; 2280 goto done; 2281 } 2282 params->status = reply->IOCStatus; 2283 if (params->hdr.Ext.ExtPageType != 0) { 2284 params->hdr.Ext.ExtPageType = reply->ExtPageType; 2285 params->hdr.Ext.ExtPageLength = reply->ExtPageLength; 2286 } else { 2287 params->hdr.Struct.PageType = reply->Header.PageType; 2288 params->hdr.Struct.PageNumber = reply->Header.PageNumber; 2289 params->hdr.Struct.PageLength = reply->Header.PageLength; 2290 params->hdr.Struct.PageVersion = reply->Header.PageVersion; 2291 } 2292 2293 done: 2294 mps_free_command(sc, cm); 2295 if (params->callback != NULL) 2296 params->callback(sc, params); 2297 2298 return; 2299 } 2300