1 /* 2 * extensions to ioctl_meteor.h for the bt848 cards 3 * 4 * $FreeBSD: src/sys/dev/bktr/ioctl_bt848.h,v 1.30 2003/12/20 17:12:25 obrien Exp $ 5 * $DragonFly: src/sys/dev/video/bktr/ioctl_bt848.h,v 1.1 2004/05/15 17:54:13 joerg Exp $ 6 */ 7 8 #ifndef _DEV_BKTR_IOCTL_BT848_H_ 9 #define _DEV_BKTR_IOCTL_BT848_H_ 10 11 /* 12 * frequency sets 13 */ 14 #define CHNLSET_NABCST 1 15 #define CHNLSET_CABLEIRC 2 16 #define CHNLSET_CABLEHRC 3 17 #define CHNLSET_WEUROPE 4 18 #define CHNLSET_JPNBCST 5 19 #define CHNLSET_JPNCABLE 6 20 #define CHNLSET_XUSSR 7 21 #define CHNLSET_AUSTRALIA 8 22 #define CHNLSET_FRANCE 9 23 #define CHNLSET_MIN CHNLSET_NABCST 24 #define CHNLSET_MAX CHNLSET_FRANCE 25 26 27 /* 28 * constants for various tuner registers 29 */ 30 #define BT848_HUEMIN (-90) 31 #define BT848_HUEMAX 90 32 #define BT848_HUECENTER 0 33 #define BT848_HUERANGE 179.3 34 #define BT848_HUEREGMIN (-128) 35 #define BT848_HUEREGMAX 127 36 #define BT848_HUESTEPS 256 37 38 #define BT848_BRIGHTMIN (-50) 39 #define BT848_BRIGHTMAX 50 40 #define BT848_BRIGHTCENTER 0 41 #define BT848_BRIGHTRANGE 99.6 42 #define BT848_BRIGHTREGMIN (-128) 43 #define BT848_BRIGHTREGMAX 127 44 #define BT848_BRIGHTSTEPS 256 45 46 #define BT848_CONTRASTMIN 0 47 #define BT848_CONTRASTMAX 237 48 #define BT848_CONTRASTCENTER 100 49 #define BT848_CONTRASTRANGE 236.57 50 #define BT848_CONTRASTREGMIN 0 51 #define BT848_CONTRASTREGMAX 511 52 #define BT848_CONTRASTSTEPS 512 53 54 #define BT848_CHROMAMIN 0 55 #define BT848_CHROMAMAX 284 56 #define BT848_CHROMACENTER 100 57 #define BT848_CHROMARANGE 283.89 58 #define BT848_CHROMAREGMIN 0 59 #define BT848_CHROMAREGMAX 511 60 #define BT848_CHROMASTEPS 512 61 62 #define BT848_SATUMIN 0 63 #define BT848_SATUMAX 202 64 #define BT848_SATUCENTER 100 65 #define BT848_SATURANGE 201.18 66 #define BT848_SATUREGMIN 0 67 #define BT848_SATUREGMAX 511 68 #define BT848_SATUSTEPS 512 69 70 #define BT848_SATVMIN 0 71 #define BT848_SATVMAX 284 72 #define BT848_SATVCENTER 100 73 #define BT848_SATVRANGE 283.89 74 #define BT848_SATVREGMIN 0 75 #define BT848_SATVREGMAX 511 76 #define BT848_SATVSTEPS 512 77 78 79 /* 80 * audio stuff 81 */ 82 #define AUDIO_TUNER 0x00 /* command for the audio routine */ 83 #define AUDIO_EXTERN 0x01 /* don't confuse them with bit */ 84 #define AUDIO_INTERN 0x02 /* settings */ 85 #define AUDIO_MUTE 0x80 86 #define AUDIO_UNMUTE 0x81 87 88 89 /* 90 * EEProm stuff 91 */ 92 struct eeProm { 93 short offset; 94 short count; 95 u_char bytes[ 256 ]; 96 }; 97 98 99 /* 100 * XXX: this is a hack, should be in ioctl_meteor.h 101 * here to avoid touching that file for now... 102 */ 103 #define TVTUNER_SETCHNL _IOW('x', 32, unsigned int) /* set channel */ 104 #define TVTUNER_GETCHNL _IOR('x', 32, unsigned int) /* get channel */ 105 #define TVTUNER_SETTYPE _IOW('x', 33, unsigned int) /* set tuner type */ 106 #define TVTUNER_GETTYPE _IOR('x', 33, unsigned int) /* get tuner type */ 107 #define TVTUNER_GETSTATUS _IOR('x', 34, unsigned int) /* get tuner status */ 108 #define TVTUNER_SETFREQ _IOW('x', 35, unsigned int) /* set frequency */ 109 #define TVTUNER_GETFREQ _IOR('x', 36, unsigned int) /* get frequency */ 110 111 112 #define BT848_SHUE _IOW('x', 37, int) /* set hue */ 113 #define BT848_GHUE _IOR('x', 37, int) /* get hue */ 114 #define BT848_SBRIG _IOW('x', 38, int) /* set brightness */ 115 #define BT848_GBRIG _IOR('x', 38, int) /* get brightness */ 116 #define BT848_SCSAT _IOW('x', 39, int) /* set chroma sat */ 117 #define BT848_GCSAT _IOR('x', 39, int) /* get UV saturation */ 118 #define BT848_SCONT _IOW('x', 40, int) /* set contrast */ 119 #define BT848_GCONT _IOR('x', 40, int) /* get contrast */ 120 #define BT848_SVSAT _IOW('x', 41, int) /* set chroma V sat */ 121 #define BT848_GVSAT _IOR('x', 41, int) /* get V saturation */ 122 #define BT848_SUSAT _IOW('x', 42, int) /* set chroma U sat */ 123 #define BT848_GUSAT _IOR('x', 42, int) /* get U saturation */ 124 125 #define BT848_SCBARS _IOR('x', 43, int) /* set colorbar */ 126 #define BT848_CCBARS _IOR('x', 44, int) /* clear colorbar */ 127 128 129 #define BT848_SAUDIO _IOW('x', 46, int) /* set audio channel */ 130 #define BT848_GAUDIO _IOR('x', 47, int) /* get audio channel */ 131 #define BT848_SBTSC _IOW('x', 48, int) /* set audio channel */ 132 133 #define BT848_GSTATUS _IOR('x', 49, unsigned int) /* reap status */ 134 135 #define BT848_WEEPROM _IOWR('x', 50, struct eeProm) /* write to EEProm */ 136 #define BT848_REEPROM _IOWR('x', 51, struct eeProm) /* read from EEProm */ 137 138 #define BT848_SIGNATURE _IOWR('x', 52, struct eeProm) /* read card sig */ 139 140 #define TVTUNER_SETAFC _IOW('x', 53, int) /* turn AFC on/off */ 141 #define TVTUNER_GETAFC _IOR('x', 54, int) /* query AFC on/off */ 142 #define BT848_SLNOTCH _IOW('x', 55, int) /* set luma notch */ 143 #define BT848_GLNOTCH _IOR('x', 56, int) /* get luma notch */ 144 145 /* Read/Write the BT848's I2C bus directly 146 * b7-b0: data (read/write) 147 * b15-b8: internal peripheral register (write) 148 * b23-b16: i2c addr (write) 149 * b31-b24: 1 = write, 0 = read 150 */ 151 #define BT848_I2CWR _IOWR('x', 57, u_long) /* i2c read-write */ 152 153 struct bktr_msp_control { 154 unsigned char function; 155 unsigned int address; 156 unsigned int data; 157 }; 158 159 #define BT848_MSP_RESET _IO('x', 76) /* MSP chip reset */ 160 #define BT848_MSP_READ _IOWR('x', 77, struct bktr_msp_control) /* MSP chip read */ 161 #define BT848_MSP_WRITE _IOWR('x', 78, struct bktr_msp_control) /* MSP chip write */ 162 163 /* Support for radio tuner */ 164 #define RADIO_SETMODE _IOW('x', 58, unsigned int) /* set radio modes */ 165 #define RADIO_GETMODE _IOR('x', 58, unsigned char) /* get radio modes */ 166 #define RADIO_AFC 0x01 /* These modes will probably not */ 167 #define RADIO_MONO 0x02 /* work on the FRxxxx. It does */ 168 #define RADIO_MUTE 0x08 /* work on the FMxxxx. */ 169 #define RADIO_SETFREQ _IOW('x', 59, unsigned int) /* set frequency */ 170 #define RADIO_GETFREQ _IOR('x', 59, unsigned int) /* set frequency */ 171 /* Argument is frequency*100MHz */ 172 173 /* 174 * XXX: more bad magic, 175 * we need to fix the METEORGINPUT to return something public 176 * duplicate them here for now... 177 */ 178 #define METEOR_DEV0 0x00001000 179 #define METEOR_DEV1 0x00002000 180 #define METEOR_DEV2 0x00004000 181 #define METEOR_DEV3 0x00008000 182 #define METEOR_DEV_SVIDEO 0x00006000 183 /* 184 * right now I don't know were to put these, but as they are suppose to be 185 * a part of a common video capture interface, these should be relocated to 186 * another place. Probably most of the METEOR_xxx defines need to be 187 * renamed and moved to a common header 188 */ 189 190 typedef enum { METEOR_PIXTYPE_RGB, METEOR_PIXTYPE_YUV, 191 METEOR_PIXTYPE_YUV_PACKED, 192 METEOR_PIXTYPE_YUV_12 } METEOR_PIXTYPE; 193 194 195 struct meteor_pixfmt { 196 u_int index; /* Index in supported pixfmt list */ 197 METEOR_PIXTYPE type; /* What's the board gonna feed us */ 198 u_int Bpp; /* Bytes per pixel */ 199 u_long masks[3]; /* R,G,B or Y,U,V masks, respectively */ 200 unsigned swap_bytes :1; /* Bytes swapped within shorts */ 201 unsigned swap_shorts:1; /* Shorts swapped within longs */ 202 }; 203 204 205 struct bktr_clip { 206 int x_min; 207 int x_max; 208 int y_min; 209 int y_max; 210 }; 211 212 #define BT848_MAX_CLIP_NODE 100 213 struct _bktr_clip { 214 struct bktr_clip x[BT848_MAX_CLIP_NODE]; 215 }; 216 217 /* 218 * I'm using METEOR_xxx just because that will be common to other interface 219 * and less of a surprise 220 */ 221 #define METEORSACTPIXFMT _IOW('x', 64, int ) 222 #define METEORGACTPIXFMT _IOR('x', 64, int ) 223 #define METEORGSUPPIXFMT _IOWR('x', 65, struct meteor_pixfmt) 224 225 /* set clip list */ 226 #define BT848SCLIP _IOW('x', 66, struct _bktr_clip ) 227 #define BT848GCLIP _IOR('x', 66, struct _bktr_clip ) 228 229 230 /* set input format */ 231 #define BT848SFMT _IOW('x', 67, unsigned long ) 232 #define BT848GFMT _IOR('x', 67, unsigned long ) 233 234 /* set clear-buffer-on-start */ 235 #define BT848SCBUF _IOW('x', 68, int) 236 #define BT848GCBUF _IOR('x', 68, int) 237 238 /* set capture area */ 239 /* The capture area is the area of the video image which is grabbed */ 240 /* Usually the capture area is 640x480 (768x576 PAL) pixels */ 241 /* This area is then scaled to the dimensions the user requires */ 242 /* using the METEORGEO ioctl */ 243 /* However, the capture area could be 400x300 pixels from the top right */ 244 /* corner of the video image */ 245 struct bktr_capture_area { 246 int x_offset; 247 int y_offset; 248 int x_size; 249 int y_size; 250 }; 251 #define BT848_SCAPAREA _IOW('x', 69, struct bktr_capture_area) 252 #define BT848_GCAPAREA _IOR('x', 69, struct bktr_capture_area) 253 254 255 /* Get channel Set */ 256 #define BT848_MAX_CHNLSET_NAME_LEN 16 257 struct bktr_chnlset { 258 short index; 259 short max_channel; 260 char name[BT848_MAX_CHNLSET_NAME_LEN]; 261 }; 262 #define TVTUNER_GETCHNLSET _IOWR('x', 70, struct bktr_chnlset) 263 264 265 266 /* Infra Red Remote Control */ 267 struct bktr_remote { 268 unsigned char data[3]; 269 }; 270 #define REMOTE_GETKEY _IOR('x', 71, struct bktr_remote)/*read the remote */ 271 /*control receiver*/ 272 /*returns raw data*/ 273 274 275 /* 276 * Direct access to GPIO pins. You must add BKTR_GPIO_ACCESS to your kernel 277 * configuration file to use these 278 */ 279 #define BT848_GPIO_SET_EN _IOW('x', 72, int) /* set gpio_out_en */ 280 #define BT848_GPIO_GET_EN _IOR('x', 73, int) /* get gpio_out_en */ 281 #define BT848_GPIO_SET_DATA _IOW('x', 74, int) /* set gpio_data */ 282 #define BT848_GPIO_GET_DATA _IOR('x', 75, int) /* get gpio_data */ 283 284 285 286 /* XXX - Copied from /sys/pci/brktree_reg.h */ 287 #define BT848_IFORM_FORMAT (0x7<<0) 288 # define BT848_IFORM_F_RSVD (0x7) 289 # define BT848_IFORM_F_SECAM (0x6) 290 # define BT848_IFORM_F_PALN (0x5) 291 # define BT848_IFORM_F_PALM (0x4) 292 # define BT848_IFORM_F_PALBDGHI (0x3) 293 # define BT848_IFORM_F_NTSCJ (0x2) 294 # define BT848_IFORM_F_NTSCM (0x1) 295 # define BT848_IFORM_F_AUTO (0x0) 296 297 298 #endif /* _DEV_BKTR_IOCTL_BT848_H_ */ 299