xref: /dragonfly/sys/kern/kern_physio.c (revision cb633bb4)
1 /*
2  * Copyright (c) 1994 John S. Dyson
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice immediately at the beginning of the file, without modification,
10  *    this list of conditions, and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Absolutely no warranty of function or purpose is made by the author
15  *    John S. Dyson.
16  * 4. Modifications may be freely made to this file if the above conditions
17  *    are met.
18  *
19  * $FreeBSD: src/sys/kern/kern_physio.c,v 1.46.2.4 2003/11/14 09:51:47 simokawa Exp $
20  * $DragonFly: src/sys/kern/kern_physio.c,v 1.12 2005/08/04 21:08:35 hmp Exp $
21  */
22 
23 #include <sys/param.h>
24 #include <sys/systm.h>
25 #include <sys/buf.h>
26 #include <sys/conf.h>
27 #include <sys/proc.h>
28 #include <sys/uio.h>
29 #include <sys/device.h>
30 #include <sys/thread2.h>
31 
32 #include <vm/vm.h>
33 #include <vm/vm_extern.h>
34 
35 static void
36 physwakeup(struct buf *bp)
37 {
38 	wakeup((caddr_t) bp);
39 }
40 
41 int
42 physio(dev_t dev, struct uio *uio, int ioflag)
43 {
44 	int i;
45 	int error;
46 	int chk_blockno;
47 	caddr_t sa;
48 	off_t blockno;
49 	u_int iolen;
50 	struct buf *bp;
51 
52 	/*
53 	 * NOTE: we no longer have to PHOLD() the process, because the
54 	 * kernel stack / uarea cannot be swapped, and when it can be in
55 	 * the future it will only happen if the process is sleeping on
56 	 * a particular address.
57 	 */
58 	bp = getpbuf(NULL);
59 	sa = bp->b_data;
60 	error = 0;
61 
62 	/* XXX: sanity check */
63 	if(dev->si_iosize_max < PAGE_SIZE) {
64 		printf("WARNING: %s si_iosize_max=%d, using DFLTPHYS.\n",
65 		    devtoname(dev), dev->si_iosize_max);
66 		dev->si_iosize_max = DFLTPHYS;
67 	}
68 
69 	/* Don't check block number overflow for D_MEM */
70 	if ((dev_dflags(dev) & D_TYPEMASK) == D_MEM)
71 		chk_blockno = 0;
72 	else
73 		chk_blockno = 1;
74 
75 	for (i = 0; i < uio->uio_iovcnt; i++) {
76 		while (uio->uio_iov[i].iov_len) {
77 			if (uio->uio_rw == UIO_READ)
78 				bp->b_flags = B_PHYS | B_READ;
79 			else
80 				bp->b_flags = B_PHYS | B_WRITE;
81 			bp->b_dev = dev;
82 			bp->b_iodone = physwakeup;
83 			bp->b_data = uio->uio_iov[i].iov_base;
84 			bp->b_bcount = uio->uio_iov[i].iov_len;
85 			bp->b_offset = uio->uio_offset;
86 			bp->b_saveaddr = sa;
87 
88 			/* Don't exceed drivers iosize limit */
89 			if (bp->b_bcount > dev->si_iosize_max)
90 				bp->b_bcount = dev->si_iosize_max;
91 
92 			/*
93 			 * Make sure the pbuf can map the request
94 			 * XXX: The pbuf has kvasize = MAXPHYS so a request
95 			 * XXX: larger than MAXPHYS - PAGE_SIZE must be
96 			 * XXX: page aligned or it will be fragmented.
97 			 */
98 			iolen = ((vm_offset_t) bp->b_data) & PAGE_MASK;
99 			if ((bp->b_bcount + iolen) > bp->b_kvasize) {
100 				bp->b_bcount = bp->b_kvasize;
101 				if (iolen != 0)
102 					bp->b_bcount -= PAGE_SIZE;
103 			}
104 			bp->b_bufsize = bp->b_bcount;
105 
106 			blockno = bp->b_offset >> DEV_BSHIFT;
107 			if (chk_blockno && (daddr_t)blockno != blockno) {
108 				error = EINVAL; /* blockno overflow */
109 				goto doerror;
110 			}
111 			bp->b_blkno = blockno;
112 
113 			if (uio->uio_segflg == UIO_USERSPACE)
114 				if (vmapbuf(bp) < 0) {
115 					error = EFAULT;
116 					goto doerror;
117 				}
118 
119 			BUF_STRATEGY(bp, 0);
120 			crit_enter();
121 			while ((bp->b_flags & B_DONE) == 0)
122 				tsleep((caddr_t)bp, 0, "physstr", 0);
123 			crit_exit();
124 
125 			if (uio->uio_segflg == UIO_USERSPACE)
126 				vunmapbuf(bp);
127 			iolen = bp->b_bcount - bp->b_resid;
128 			if (iolen == 0 && !(bp->b_flags & B_ERROR))
129 				goto doerror;	/* EOF */
130 			uio->uio_iov[i].iov_len -= iolen;
131 			uio->uio_iov[i].iov_base += iolen;
132 			uio->uio_resid -= iolen;
133 			uio->uio_offset += iolen;
134 			if( bp->b_flags & B_ERROR) {
135 				error = bp->b_error;
136 				goto doerror;
137 			}
138 		}
139 	}
140 doerror:
141 	bp->b_data = sa;
142 	relpbuf(bp, NULL);
143 	return (error);
144 }
145