xref: /dragonfly/sys/kern/kern_physio.c (revision d600454b)
1 /*
2  * Copyright (c) 1994 John S. Dyson
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice immediately at the beginning of the file, without modification,
10  *    this list of conditions, and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Absolutely no warranty of function or purpose is made by the author
15  *    John S. Dyson.
16  * 4. Modifications may be freely made to this file if the above conditions
17  *    are met.
18  *
19  * $FreeBSD: src/sys/kern/kern_physio.c,v 1.46.2.4 2003/11/14 09:51:47 simokawa Exp $
20  * $DragonFly: src/sys/kern/kern_physio.c,v 1.14 2006/02/17 19:18:06 dillon Exp $
21  */
22 
23 #include <sys/param.h>
24 #include <sys/systm.h>
25 #include <sys/buf.h>
26 #include <sys/conf.h>
27 #include <sys/proc.h>
28 #include <sys/uio.h>
29 #include <sys/device.h>
30 #include <sys/thread2.h>
31 
32 #include <vm/vm.h>
33 #include <vm/vm_extern.h>
34 
35 static void
36 physwakeup(struct bio *bio)
37 {
38 	wakeup(bio);
39 }
40 
41 int
42 physio(dev_t dev, struct uio *uio, int ioflag)
43 {
44 	int i;
45 	int error;
46 	int chk_blockno;
47 	caddr_t sa;
48 	off_t blockno;
49 	u_int iolen;
50 	struct buf *bp;
51 
52 	bp = getpbuf(NULL);
53 	sa = bp->b_data;
54 	error = 0;
55 
56 	/* XXX: sanity check */
57 	if(dev->si_iosize_max < PAGE_SIZE) {
58 		printf("WARNING: %s si_iosize_max=%d, using DFLTPHYS.\n",
59 		    devtoname(dev), dev->si_iosize_max);
60 		dev->si_iosize_max = DFLTPHYS;
61 	}
62 
63 	/* Don't check block number overflow for D_MEM */
64 	if ((dev_dflags(dev) & D_TYPEMASK) == D_MEM)
65 		chk_blockno = 0;
66 	else
67 		chk_blockno = 1;
68 
69 	for (i = 0; i < uio->uio_iovcnt; i++) {
70 		while (uio->uio_iov[i].iov_len) {
71 			if (uio->uio_rw == UIO_READ)
72 				bp->b_flags = B_PHYS | B_READ;
73 			else
74 				bp->b_flags = B_PHYS | B_WRITE;
75 			bp->b_data = uio->uio_iov[i].iov_base;
76 			bp->b_bcount = uio->uio_iov[i].iov_len;
77 			bp->b_saveaddr = sa;
78 
79 			reinitbufbio(bp);	/* clear translation cache */
80 			bp->b_bio1.bio_offset = uio->uio_offset;
81 			bp->b_bio1.bio_done = physwakeup;
82 
83 			/* Don't exceed drivers iosize limit */
84 			if (bp->b_bcount > dev->si_iosize_max)
85 				bp->b_bcount = dev->si_iosize_max;
86 
87 			/*
88 			 * Make sure the pbuf can map the request
89 			 * XXX: The pbuf has kvasize = MAXPHYS so a request
90 			 * XXX: larger than MAXPHYS - PAGE_SIZE must be
91 			 * XXX: page aligned or it will be fragmented.
92 			 */
93 			iolen = ((vm_offset_t) bp->b_data) & PAGE_MASK;
94 			if ((bp->b_bcount + iolen) > bp->b_kvasize) {
95 				bp->b_bcount = bp->b_kvasize;
96 				if (iolen != 0)
97 					bp->b_bcount -= PAGE_SIZE;
98 			}
99 			bp->b_bufsize = bp->b_bcount;
100 
101 			/*
102 			 * XXX we shouldn't have to set the block
103 			 * number.
104 			 */
105 			blockno = bp->b_bio1.bio_offset >> DEV_BSHIFT;
106 			if (chk_blockno && (daddr_t)blockno != blockno) {
107 				error = EINVAL; /* blockno overflow */
108 				goto doerror;
109 			}
110 			bp->b_bio1.bio_blkno = blockno;
111 
112 			if (uio->uio_segflg == UIO_USERSPACE) {
113 				if (vmapbuf(bp) < 0) {
114 					error = EFAULT;
115 					goto doerror;
116 				}
117 			}
118 			dev_dstrategy(dev, &bp->b_bio1);
119 			crit_enter();
120 			while ((bp->b_flags & B_DONE) == 0)
121 				tsleep(&bp->b_bio1, 0, "physstr", 0);
122 			crit_exit();
123 
124 			if (uio->uio_segflg == UIO_USERSPACE)
125 				vunmapbuf(bp);
126 			iolen = bp->b_bcount - bp->b_resid;
127 			if (iolen == 0 && !(bp->b_flags & B_ERROR))
128 				goto doerror;	/* EOF */
129 			uio->uio_iov[i].iov_len -= iolen;
130 			uio->uio_iov[i].iov_base += iolen;
131 			uio->uio_resid -= iolen;
132 			uio->uio_offset += iolen;
133 			if( bp->b_flags & B_ERROR) {
134 				error = bp->b_error;
135 				goto doerror;
136 			}
137 		}
138 	}
139 doerror:
140 	bp->b_data = sa;
141 	relpbuf(bp, NULL);
142 	return (error);
143 }
144