1 /* 2 * Copyright (c) 2003,2004 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@backplane.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * 3. Neither the name of The DragonFly Project nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific, prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35 /* 36 * WARNING! THE SYSTIMER MODULE DOES NOT OPERATE OR DISPATCH WITH THE 37 * MP LOCK HELD. ALL CODE USING THIS MODULE MUST BE MP-SAFE. 38 * 39 * This code implements a fine-grained per-cpu system timer which is 40 * ultimately based on a hardware timer. The hardware timer abstraction 41 * is sufficiently disconnected from this code to support both per-cpu 42 * hardware timers or a single system-wide hardware timer. 43 * 44 * WARNING! During early boot if a new system timer is selected, existing 45 * timeouts will not be effected and will thus occur slower or faster. 46 * periodic timers will be adjusted at the next periodic load. 47 * 48 * Notes on machine-dependant code (in arch/arch/systimer.c) 49 * 50 * cputimer_intr_reload() Reload the one-shot (per-cpu basis) 51 */ 52 53 #include <sys/param.h> 54 #include <sys/kernel.h> 55 #include <sys/systm.h> 56 #include <sys/thread.h> 57 #include <sys/globaldata.h> 58 #include <sys/systimer.h> 59 #include <sys/thread2.h> 60 61 /* 62 * Execute ready systimers. Called directly from the platform-specific 63 * one-shot timer clock interrupt (e.g. clkintr()) or via an IPI. May 64 * be called simultaniously on multiple cpus and always operations on 65 * the current cpu's queue. Systimer functions are responsible for calling 66 * hardclock, statclock, and other finely-timed routines. 67 */ 68 void 69 systimer_intr(sysclock_t *timep, int in_ipi, struct intrframe *frame) 70 { 71 globaldata_t gd = mycpu; 72 sysclock_t time = *timep; 73 systimer_t info; 74 75 if (gd->gd_syst_nest) 76 return; 77 78 crit_enter(); 79 ++gd->gd_syst_nest; 80 while ((info = TAILQ_FIRST(&gd->gd_systimerq)) != NULL) { 81 /* 82 * If we haven't reached the requested time, tell the cputimer 83 * how much is left and break out. 84 */ 85 if ((int)(info->time - time) > 0) { 86 cputimer_intr_reload(info->time - time); 87 break; 88 } 89 90 /* 91 * Dequeue and execute, detect a loss of the systimer. Note 92 * that the in-progress systimer pointer can only be used to 93 * detect a loss of the systimer, it is only useful within 94 * this code sequence and becomes stale otherwise. 95 */ 96 info->flags &= ~SYSTF_ONQUEUE; 97 TAILQ_REMOVE(info->queue, info, node); 98 gd->gd_systimer_inprog = info; 99 crit_exit(); 100 info->func(info, in_ipi, frame); 101 crit_enter(); 102 103 /* 104 * The caller may deleted or even re-queue the systimer itself 105 * with a delete/add sequence. If the caller does not mess with 106 * the systimer we will requeue the periodic interval automatically. 107 * 108 * If this is a non-queued periodic interrupt, do not allow multiple 109 * events to build up (used for things like the callout timer to 110 * prevent premature timeouts due to long interrupt disablements, 111 * BIOS 8254 glitching, and so forth). However, we still want to 112 * keep things synchronized between cpus for efficient handling of 113 * the timer interrupt so jump in multiples of the periodic rate. 114 */ 115 if (gd->gd_systimer_inprog == info && info->periodic) { 116 if (info->which != sys_cputimer) { 117 info->periodic = sys_cputimer->fromhz(info->freq); 118 info->which = sys_cputimer; 119 } 120 info->time += info->periodic; 121 if ((info->flags & SYSTF_NONQUEUED) && 122 (int)(info->time - time) <= 0 123 ) { 124 info->time += ((time - info->time + info->periodic - 1) / 125 info->periodic) * info->periodic; 126 } 127 systimer_add(info); 128 } 129 gd->gd_systimer_inprog = NULL; 130 } 131 --gd->gd_syst_nest; 132 crit_exit(); 133 } 134 135 void 136 systimer_intr_enable(void) 137 { 138 cputimer_intr_enable(); 139 } 140 141 /* 142 * MPSAFE 143 */ 144 void 145 systimer_add(systimer_t info) 146 { 147 struct globaldata *gd = mycpu; 148 149 KKASSERT((info->flags & SYSTF_ONQUEUE) == 0); 150 crit_enter(); 151 if (info->gd == gd) { 152 systimer_t scan1; 153 systimer_t scan2; 154 scan1 = TAILQ_FIRST(&gd->gd_systimerq); 155 if (scan1 == NULL || (int)(scan1->time - info->time) > 0) { 156 cputimer_intr_reload(info->time - sys_cputimer->count()); 157 TAILQ_INSERT_HEAD(&gd->gd_systimerq, info, node); 158 } else { 159 scan2 = TAILQ_LAST(&gd->gd_systimerq, systimerq); 160 for (;;) { 161 if (scan1 == NULL) { 162 TAILQ_INSERT_TAIL(&gd->gd_systimerq, info, node); 163 break; 164 } 165 if ((int)(scan1->time - info->time) > 0) { 166 TAILQ_INSERT_BEFORE(scan1, info, node); 167 break; 168 } 169 if ((int)(scan2->time - info->time) <= 0) { 170 TAILQ_INSERT_AFTER(&gd->gd_systimerq, scan2, info, node); 171 break; 172 } 173 scan1 = TAILQ_NEXT(scan1, node); 174 scan2 = TAILQ_PREV(scan2, systimerq, node); 175 } 176 } 177 info->flags = (info->flags | SYSTF_ONQUEUE) & ~SYSTF_IPIRUNNING; 178 info->queue = &gd->gd_systimerq; 179 } else { 180 KKASSERT((info->flags & SYSTF_IPIRUNNING) == 0); 181 info->flags |= SYSTF_IPIRUNNING; 182 lwkt_send_ipiq(info->gd, (ipifunc1_t)systimer_add, info); 183 } 184 crit_exit(); 185 } 186 187 /* 188 * systimer_del() 189 * 190 * Delete a system timer. Only the owning cpu can delete a timer. 191 * 192 * MPSAFE 193 */ 194 void 195 systimer_del(systimer_t info) 196 { 197 struct globaldata *gd = info->gd; 198 199 KKASSERT(gd == mycpu && (info->flags & SYSTF_IPIRUNNING) == 0); 200 201 crit_enter(); 202 203 if (info->flags & SYSTF_ONQUEUE) { 204 TAILQ_REMOVE(info->queue, info, node); 205 info->flags &= ~SYSTF_ONQUEUE; 206 } 207 208 /* 209 * Deal with dispatch races by clearing the in-progress systimer 210 * pointer. Only a direct pointer comparison can be used, the 211 * actual contents of the structure gd_systimer_inprog points to, 212 * if not equal to info, may be stale. 213 */ 214 if (gd->gd_systimer_inprog == info) 215 gd->gd_systimer_inprog = NULL; 216 217 crit_exit(); 218 } 219 220 /* 221 * systimer_init_periodic() 222 * 223 * Initialize a periodic timer at the specified frequency and add 224 * it to the system. The frequency is uncompensated and approximate. 225 * 226 * Try to synchronize multi registrations of the same or similar 227 * frequencies so the hardware interrupt is able to dispatch several 228 * at together by adjusting the phase of the initial interrupt. This 229 * helps SMP. Note that we are not attempting to synchronize to 230 * the realtime clock. 231 */ 232 void 233 systimer_init_periodic(systimer_t info, systimer_func_t func, void *data, 234 int hz) 235 { 236 sysclock_t base_count; 237 238 bzero(info, sizeof(struct systimer)); 239 info->periodic = sys_cputimer->fromhz(hz); 240 base_count = sys_cputimer->count(); 241 base_count = base_count - (base_count % info->periodic); 242 info->time = base_count + info->periodic; 243 info->func = func; 244 info->data = data; 245 info->freq = hz; 246 info->which = sys_cputimer; 247 info->gd = mycpu; 248 systimer_add(info); 249 } 250 251 void 252 systimer_init_periodic_nq(systimer_t info, systimer_func_t func, void *data, 253 int hz) 254 { 255 sysclock_t base_count; 256 257 bzero(info, sizeof(struct systimer)); 258 info->periodic = sys_cputimer->fromhz(hz); 259 base_count = sys_cputimer->count(); 260 base_count = base_count - (base_count % info->periodic); 261 info->time = base_count + info->periodic; 262 info->func = func; 263 info->data = data; 264 info->freq = hz; 265 info->which = sys_cputimer; 266 info->gd = mycpu; 267 info->flags |= SYSTF_NONQUEUED; 268 systimer_add(info); 269 } 270 271 /* 272 * Adjust the periodic interval for a periodic timer which is already 273 * running. The current timeout is not effected. 274 */ 275 void 276 systimer_adjust_periodic(systimer_t info, int hz) 277 { 278 crit_enter(); 279 info->periodic = sys_cputimer->fromhz(hz); 280 info->freq = hz; 281 info->which = sys_cputimer; 282 crit_exit(); 283 } 284 285 /* 286 * systimer_init_oneshot() 287 * 288 * Initialize a periodic timer at the specified frequency and add 289 * it to the system. The frequency is uncompensated and approximate. 290 */ 291 void 292 systimer_init_oneshot(systimer_t info, systimer_func_t func, void *data, int us) 293 { 294 bzero(info, sizeof(struct systimer)); 295 info->time = sys_cputimer->count() + sys_cputimer->fromus(us); 296 info->func = func; 297 info->data = data; 298 info->which = sys_cputimer; 299 info->gd = mycpu; 300 systimer_add(info); 301 } 302