xref: /dragonfly/sys/kern/subr_param.c (revision 0dace59e)
1 /*
2  * Copyright (c) 1980, 1986, 1989, 1993
3  *	The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *	@(#)param.c	8.3 (Berkeley) 8/20/94
35  * $FreeBSD: src/sys/kern/subr_param.c,v 1.42.2.10 2002/03/09 21:05:47 silby Exp $
36  * $DragonFly: src/sys/kern/subr_param.c,v 1.7 2005/06/26 22:03:22 dillon Exp $
37  */
38 
39 #include "opt_param.h"
40 #include "opt_maxusers.h"
41 
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/kernel.h>
45 #include <sys/malloc.h>
46 #include <vm/pmap.h>
47 #include <machine/vmparam.h>
48 
49 /*
50  * System parameter formulae.
51  */
52 
53 #ifndef HZ
54 #define	HZ 100
55 #endif
56 #define	NPROC (20 + 16 * maxusers)
57 #ifndef NBUF
58 #define NBUF 0
59 #endif
60 #ifndef MAXFILES
61 #define	MAXFILES (maxproc * 16)
62 #endif
63 #ifndef MAXPOSIXLOCKSPERUID
64 #define MAXPOSIXLOCKSPERUID (maxusers * 64) /* Should be a safe value */
65 #endif
66 
67 int	hz;
68 int	stathz;
69 int	profhz;
70 int	ustick;				/* tick interval in microseconds */
71 int	nstick;				/* tick interval in nanoseconds */
72 int	maxusers;			/* base tunable */
73 int	maxproc;			/* maximum # of processes */
74 int	maxprocperuid;			/* max # of procs per user */
75 int	maxfiles;			/* system wide open files limit */
76 int	maxfilesrootres;		/* descriptors reserved for root use */
77 int	minfilesperproc;		/* per-proc min open files (safety) */
78 int	maxfilesperproc;		/* per-proc open files limit */
79 int	maxfilesperuser;		/* per-user open files limit */
80 int	maxposixlocksperuid;		/* max # POSIX locks per uid */
81 int	ncallout;			/* maximum # of timer events */
82 int	mbuf_wait = 32;			/* mbuf sleep time in ticks */
83 long	nbuf;
84 long	nswbuf;
85 long	maxswzone;			/* max swmeta KVA storage */
86 long	maxbcache;			/* max buffer cache KVA storage */
87 int	vmm_guest = 0; 			/* Running as virtual machine guest? */
88 u_quad_t	maxtsiz;			/* max text size */
89 u_quad_t	dfldsiz;			/* initial data size limit */
90 u_quad_t	maxdsiz;			/* max data size */
91 u_quad_t	dflssiz;			/* initial stack size limit */
92 u_quad_t	maxssiz;			/* max stack size */
93 u_quad_t	sgrowsiz;			/* amount to grow stack */
94 
95 /*
96  * These have to be allocated somewhere; allocating
97  * them here forces loader errors if this file is omitted
98  * (if they've been externed everywhere else; hah!).
99  */
100 struct	buf *swbuf;
101 
102 /*
103  * Boot time overrides that are not scaled against main memory
104  */
105 void
106 init_param1(void)
107 {
108 	hz = HZ;
109 	TUNABLE_INT_FETCH("kern.hz", &hz);
110 	stathz = hz * 128 / 100;
111 	profhz = stathz;
112 	ustick = 1000000 / hz;
113 	nstick = 1000000000 / hz;
114 	/* can adjust 30ms in 60s */
115 	ntp_default_tick_delta = howmany(30000000, 60 * hz);
116 
117 #ifdef VM_SWZONE_SIZE_MAX
118 	maxswzone = VM_SWZONE_SIZE_MAX;
119 #endif
120 	TUNABLE_LONG_FETCH("kern.maxswzone", &maxswzone);
121 #ifdef VM_BCACHE_SIZE_MAX
122 	maxbcache = VM_BCACHE_SIZE_MAX;
123 #endif
124 	TUNABLE_LONG_FETCH("kern.maxbcache", &maxbcache);
125 	maxtsiz = MAXTSIZ;
126 	TUNABLE_QUAD_FETCH("kern.maxtsiz", &maxtsiz);
127 	dfldsiz = DFLDSIZ;
128 	TUNABLE_QUAD_FETCH("kern.dfldsiz", &dfldsiz);
129 	maxdsiz = MAXDSIZ;
130 	TUNABLE_QUAD_FETCH("kern.maxdsiz", &maxdsiz);
131 	dflssiz = DFLSSIZ;
132 	TUNABLE_QUAD_FETCH("kern.dflssiz", &dflssiz);
133 	maxssiz = MAXSSIZ;
134 	TUNABLE_QUAD_FETCH("kern.maxssiz", &maxssiz);
135 	sgrowsiz = SGROWSIZ;
136 	TUNABLE_QUAD_FETCH("kern.sgrowsiz", &sgrowsiz);
137 }
138 
139 /*
140  * Boot time overrides that are scaled against main memory
141  */
142 void
143 init_param2(int physpages)
144 {
145 	size_t limsize;
146 
147 	/*
148 	 * Calculate manually becaus the VM page queues / system is not set up yet
149 	 */
150 	limsize = (size_t)physpages * PAGE_SIZE;
151 	if (limsize > KvaSize)
152 		limsize = KvaSize;
153 	limsize /= 1024 * 1024;		/* smaller of KVM or physmem in MB */
154 
155 	/* Base parameters */
156 	maxusers = MAXUSERS;
157 	TUNABLE_INT_FETCH("kern.maxusers", &maxusers);
158 	if (maxusers == 0) {
159 		maxusers = limsize / 8;		/* ~384 per 3G */
160 		if (maxusers < 32)
161 			maxusers = 32;
162 		/* no upper limit */
163 	}
164 
165 	/*
166 	 * The following can be overridden after boot via sysctl.  Note:
167 	 * unless overriden, these macros are ultimately based on maxusers.
168 	 *
169 	 * Limit maxproc so that kmap entries cannot be exhausted by
170 	 * processes.
171 	 */
172 	maxproc = NPROC;
173 	TUNABLE_INT_FETCH("kern.maxproc", &maxproc);
174 	if (maxproc < 32)
175 		maxproc = 32;
176 	if (maxproc > limsize * 21)
177 		maxproc = limsize * 21;
178 
179 	/*
180 	 * Maximum number of open files
181 	 */
182 	maxfiles = MAXFILES;
183 	TUNABLE_INT_FETCH("kern.maxfiles", &maxfiles);
184 	if (maxfiles < 128)
185 		maxfiles = 128;
186 
187 	/*
188 	 * Limit file descriptors so no single user can exhaust the
189 	 * system.
190 	 *
191 	 * WARNING: Do not set minfilesperproc too high or the user
192 	 *	    can exhaust the system with a combination of fork()
193 	 *	    and open().  Actual worst case is:
194 	 *
195 	 *	    (minfilesperproc * maxprocperuid) + maxfilesperuser
196 	 */
197 	maxprocperuid = maxproc / 4;
198 	if (maxprocperuid < 128)
199 		maxprocperuid = maxproc / 2;
200 	minfilesperproc = 8;
201 	maxfilesperproc = maxfiles / 4;
202 	maxfilesperuser = maxfilesperproc * 2;
203 	maxfilesrootres = maxfiles / 20;
204 
205 	/*
206 	 * Severe hack to try to prevent pipe() descriptors from
207 	 * blowing away kernel memory.
208 	 */
209 	if (KvaSize <= (vm_offset_t)(1536LL * 1024 * 1024) &&
210 	    maxfilesperuser > 20000) {
211 		maxfilesperuser = 20000;
212 	}
213 
214 	maxposixlocksperuid = MAXPOSIXLOCKSPERUID;
215 	TUNABLE_INT_FETCH("kern.maxposixlocksperuid", &maxposixlocksperuid);
216 
217 	/*
218 	 * Unless overriden, NBUF is typically 0 (auto-sized later).
219 	 */
220 	nbuf = NBUF;
221 	TUNABLE_LONG_FETCH("kern.nbuf", &nbuf);
222 
223 	ncallout = 16 + maxproc + maxfiles;
224 	TUNABLE_INT_FETCH("kern.ncallout", &ncallout);
225 }
226 
227