xref: /dragonfly/sys/kern/subr_prof.c (revision 4353aa4e)
1 /*-
2  * Copyright (c) 1982, 1986, 1993
3  *	The Regents of the University of California.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by the University of
16  *	California, Berkeley and its contributors.
17  * 4. Neither the name of the University nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  *	@(#)subr_prof.c	8.3 (Berkeley) 9/23/93
34  * $FreeBSD: src/sys/kern/subr_prof.c,v 1.32.2.2 2000/08/03 00:09:32 ps Exp $
35  */
36 
37 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/sysproto.h>
40 #include <sys/kernel.h>
41 #include <sys/proc.h>
42 #include <sys/resourcevar.h>
43 #include <sys/sysctl.h>
44 
45 #include <sys/thread2.h>
46 #include <sys/mplock2.h>
47 
48 #include <machine/cpu.h>
49 
50 #ifdef GPROF
51 #include <sys/malloc.h>
52 #include <sys/gmon.h>
53 #undef MCOUNT
54 
55 static MALLOC_DEFINE(M_GPROF, "gprof", "kernel profiling buffer");
56 
57 static void kmstartup (void *);
58 SYSINIT(kmem, SI_SUB_KPROF, SI_ORDER_FIRST, kmstartup, NULL)
59 
60 struct gmonparam _gmonparam = { GMON_PROF_OFF };
61 
62 #ifdef GUPROF
63 #include <machine/asmacros.h>
64 
65 void
66 nullfunc_loop_profiled(void)
67 {
68 	int i;
69 
70 	for (i = 0; i < CALIB_SCALE; i++)
71 		nullfunc_profiled();
72 }
73 
74 #define	nullfunc_loop_profiled_end	nullfunc_profiled	/* XXX */
75 
76 void
77 nullfunc_profiled(void)
78 {
79 }
80 #endif /* GUPROF */
81 
82 static void
83 kmstartup(void *dummy)
84 {
85 	char *cp;
86 	struct gmonparam *p = &_gmonparam;
87 #ifdef GUPROF
88 	int cputime_overhead;
89 	int empty_loop_time;
90 	int i;
91 	int mcount_overhead;
92 	int mexitcount_overhead;
93 	int nullfunc_loop_overhead;
94 	int nullfunc_loop_profiled_time;
95 	uintfptr_t tmp_addr;
96 #endif
97 
98 	/*
99 	 * Round lowpc and highpc to multiples of the density we're using
100 	 * so the rest of the scaling (here and in gprof) stays in ints.
101 	 */
102 	p->lowpc = ROUNDDOWN((u_long)btext, HISTFRACTION * sizeof(HISTCOUNTER));
103 	p->highpc = ROUNDUP((u_long)etext, HISTFRACTION * sizeof(HISTCOUNTER));
104 	p->textsize = p->highpc - p->lowpc;
105 	kprintf("Profiling kernel, textsize=%lu [%x..%x]\n",
106 	       p->textsize, p->lowpc, p->highpc);
107 	p->kcountsize = p->textsize / HISTFRACTION;
108 	p->hashfraction = HASHFRACTION;
109 	p->fromssize = p->textsize / HASHFRACTION;
110 	p->tolimit = p->textsize * ARCDENSITY / 100;
111 	if (p->tolimit < MINARCS)
112 		p->tolimit = MINARCS;
113 	else if (p->tolimit > MAXARCS)
114 		p->tolimit = MAXARCS;
115 	p->tossize = p->tolimit * sizeof(struct tostruct);
116 	cp = (char *)kmalloc(p->kcountsize + p->fromssize + p->tossize,
117 	    M_GPROF, M_NOWAIT | M_ZERO);
118 	if (cp == NULL) {
119 		kprintf("No memory for profiling.\n");
120 		return;
121 	}
122 	p->tos = (struct tostruct *)cp;
123 	cp += p->tossize;
124 	p->kcount = (HISTCOUNTER *)cp;
125 	cp += p->kcountsize;
126 	p->froms = (u_short *)cp;
127 
128 #ifdef GUPROF
129 	/* Initialize pointers to overhead counters. */
130 	p->cputime_count = &KCOUNT(p, PC_TO_I(p, cputime));
131 	p->mcount_count = &KCOUNT(p, PC_TO_I(p, mcount));
132 	p->mexitcount_count = &KCOUNT(p, PC_TO_I(p, mexitcount));
133 
134 	/*
135 	 * Disable interrupts to avoid interference while we calibrate
136 	 * things.
137 	 */
138 	cpu_disable_intr();
139 
140 	/*
141 	 * Determine overheads.
142 	 * XXX this needs to be repeated for each useful timer/counter.
143 	 */
144 	cputime_overhead = 0;
145 	startguprof(p);
146 	for (i = 0; i < CALIB_SCALE; i++)
147 		cputime_overhead += cputime();
148 
149 	empty_loop();
150 	startguprof(p);
151 	empty_loop();
152 	empty_loop_time = cputime();
153 
154 	nullfunc_loop_profiled();
155 
156 	/*
157 	 * Start profiling.  There won't be any normal function calls since
158 	 * interrupts are disabled, but we will call the profiling routines
159 	 * directly to determine their overheads.
160 	 */
161 	p->state = GMON_PROF_HIRES;
162 
163 	startguprof(p);
164 	nullfunc_loop_profiled();
165 
166 	startguprof(p);
167 	for (i = 0; i < CALIB_SCALE; i++)
168 #if defined(__i386__) && __GNUC__ >= 2
169 		__asm("pushl %0; call __mcount; popl %%ecx"
170 		      :
171 		      : "i" (profil)
172 		      : "ax", "bx", "cx", "dx", "memory");
173 #else
174 #error
175 #endif
176 	mcount_overhead = KCOUNT(p, PC_TO_I(p, profil));
177 
178 	startguprof(p);
179 	for (i = 0; i < CALIB_SCALE; i++)
180 #if defined(__i386__) && __GNUC__ >= 2
181 		    __asm("call " __XSTRING(HIDENAME(mexitcount)) "; 1:"
182 			  : : : "ax", "bx", "cx", "dx", "memory");
183 	__asm("movl $1b,%0" : "=rm" (tmp_addr));
184 #else
185 #error
186 #endif
187 	mexitcount_overhead = KCOUNT(p, PC_TO_I(p, tmp_addr));
188 
189 	p->state = GMON_PROF_OFF;
190 	stopguprof(p);
191 
192 	cpu_enable_intr();
193 
194 	nullfunc_loop_profiled_time = 0;
195 	for (tmp_addr = (uintfptr_t)nullfunc_loop_profiled;
196 	     tmp_addr < (uintfptr_t)nullfunc_loop_profiled_end;
197 	     tmp_addr += HISTFRACTION * sizeof(HISTCOUNTER))
198 		nullfunc_loop_profiled_time += KCOUNT(p, PC_TO_I(p, tmp_addr));
199 #define CALIB_DOSCALE(count)	(((count) + CALIB_SCALE / 3) / CALIB_SCALE)
200 #define	c2n(count, freq)	((int)((count) * 1000000000LL / freq))
201 	kprintf("cputime %d, empty_loop %d, nullfunc_loop_profiled %d, mcount %d, mexitcount %d\n",
202 	       CALIB_DOSCALE(c2n(cputime_overhead, p->profrate)),
203 	       CALIB_DOSCALE(c2n(empty_loop_time, p->profrate)),
204 	       CALIB_DOSCALE(c2n(nullfunc_loop_profiled_time, p->profrate)),
205 	       CALIB_DOSCALE(c2n(mcount_overhead, p->profrate)),
206 	       CALIB_DOSCALE(c2n(mexitcount_overhead, p->profrate)));
207 	cputime_overhead -= empty_loop_time;
208 	mcount_overhead -= empty_loop_time;
209 	mexitcount_overhead -= empty_loop_time;
210 
211 	/*-
212 	 * Profiling overheads are determined by the times between the
213 	 * following events:
214 	 *	MC1: mcount() is called
215 	 *	MC2: cputime() (called from mcount()) latches the timer
216 	 *	MC3: mcount() completes
217 	 *	ME1: mexitcount() is called
218 	 *	ME2: cputime() (called from mexitcount()) latches the timer
219 	 *	ME3: mexitcount() completes.
220 	 * The times between the events vary slightly depending on instruction
221 	 * combination and cache misses, etc.  Attempt to determine the
222 	 * minimum times.  These can be subtracted from the profiling times
223 	 * without much risk of reducing the profiling times below what they
224 	 * would be when profiling is not configured.  Abbreviate:
225 	 *	ab = minimum time between MC1 and MC3
226 	 *	a  = minumum time between MC1 and MC2
227 	 *	b  = minimum time between MC2 and MC3
228 	 *	cd = minimum time between ME1 and ME3
229 	 *	c  = minimum time between ME1 and ME2
230 	 *	d  = minimum time between ME2 and ME3.
231 	 * These satisfy the relations:
232 	 *	ab            <= mcount_overhead		(just measured)
233 	 *	a + b         <= ab
234 	 *	        cd    <= mexitcount_overhead		(just measured)
235 	 *	        c + d <= cd
236 	 *	a         + d <= nullfunc_loop_profiled_time	(just measured)
237 	 *	a >= 0, b >= 0, c >= 0, d >= 0.
238 	 * Assume that ab and cd are equal to the minimums.
239 	 */
240 	p->cputime_overhead = CALIB_DOSCALE(cputime_overhead);
241 	p->mcount_overhead = CALIB_DOSCALE(mcount_overhead - cputime_overhead);
242 	p->mexitcount_overhead = CALIB_DOSCALE(mexitcount_overhead
243 					       - cputime_overhead);
244 	nullfunc_loop_overhead = nullfunc_loop_profiled_time - empty_loop_time;
245 	p->mexitcount_post_overhead = CALIB_DOSCALE((mcount_overhead
246 						     - nullfunc_loop_overhead)
247 						    / 4);
248 	p->mexitcount_pre_overhead = p->mexitcount_overhead
249 				     + p->cputime_overhead
250 				     - p->mexitcount_post_overhead;
251 	p->mcount_pre_overhead = CALIB_DOSCALE(nullfunc_loop_overhead)
252 				 - p->mexitcount_post_overhead;
253 	p->mcount_post_overhead = p->mcount_overhead
254 				  + p->cputime_overhead
255 				  - p->mcount_pre_overhead;
256 	kprintf(
257 "Profiling overheads: mcount: %d+%d, %d+%d; mexitcount: %d+%d, %d+%d nsec\n",
258 	       c2n(p->cputime_overhead, p->profrate),
259 	       c2n(p->mcount_overhead, p->profrate),
260 	       c2n(p->mcount_pre_overhead, p->profrate),
261 	       c2n(p->mcount_post_overhead, p->profrate),
262 	       c2n(p->cputime_overhead, p->profrate),
263 	       c2n(p->mexitcount_overhead, p->profrate),
264 	       c2n(p->mexitcount_pre_overhead, p->profrate),
265 	       c2n(p->mexitcount_post_overhead, p->profrate));
266 	kprintf(
267 "Profiling overheads: mcount: %d+%d, %d+%d; mexitcount: %d+%d, %d+%d cycles\n",
268 	       p->cputime_overhead, p->mcount_overhead,
269 	       p->mcount_pre_overhead, p->mcount_post_overhead,
270 	       p->cputime_overhead, p->mexitcount_overhead,
271 	       p->mexitcount_pre_overhead, p->mexitcount_post_overhead);
272 #endif /* GUPROF */
273 }
274 
275 /*
276  * Return kernel profiling information.
277  */
278 static int
279 sysctl_kern_prof(SYSCTL_HANDLER_ARGS)
280 {
281 	int *name = (int *) arg1;
282 	u_int namelen = arg2;
283 	struct gmonparam *gp = &_gmonparam;
284 	int error;
285 	int state;
286 
287 	/* all sysctl names at this level are terminal */
288 	if (namelen != 1)
289 		return (ENOTDIR);		/* overloaded */
290 
291 	switch (name[0]) {
292 	case GPROF_STATE:
293 		state = gp->state;
294 		error = sysctl_handle_int(oidp, &state, 0, req);
295 		if (error)
296 			return (error);
297 		if (!req->newptr)
298 			return (0);
299 		lwkt_gettoken(&proc0.p_token);
300 		if (state == GMON_PROF_OFF) {
301 			gp->state = state;
302 			stopprofclock(&proc0);
303 			stopguprof(gp);
304 		} else if (state == GMON_PROF_ON) {
305 			gp->state = GMON_PROF_OFF;
306 			stopguprof(gp);
307 			gp->profrate = profhz;
308 			startprofclock(&proc0);
309 			gp->state = state;
310 #ifdef GUPROF
311 		} else if (state == GMON_PROF_HIRES) {
312 			gp->state = GMON_PROF_OFF;
313 			stopprofclock(&proc0);
314 			startguprof(gp);
315 			gp->state = state;
316 #endif
317 		} else if (state != gp->state) {
318 			error = EINVAL;
319 		}
320 		lwkt_reltoken(&proc0.p_token);
321 		return (error);
322 	case GPROF_COUNT:
323 		return (sysctl_handle_opaque(oidp,
324 			gp->kcount, gp->kcountsize, req));
325 	case GPROF_FROMS:
326 		return (sysctl_handle_opaque(oidp,
327 			gp->froms, gp->fromssize, req));
328 	case GPROF_TOS:
329 		return (sysctl_handle_opaque(oidp,
330 			gp->tos, gp->tossize, req));
331 	case GPROF_GMONPARAM:
332 		return (sysctl_handle_opaque(oidp, gp, sizeof *gp, req));
333 	default:
334 		return (EOPNOTSUPP);
335 	}
336 	/* NOTREACHED */
337 }
338 
339 SYSCTL_NODE(_kern, KERN_PROF, prof, CTLFLAG_RW, sysctl_kern_prof, "");
340 #endif /* GPROF */
341 
342 /*
343  * Profiling system call.
344  *
345  * The scale factor is a fixed point number with 16 bits of fraction, so that
346  * 1.0 is represented as 0x10000.  A scale factor of 0 turns off profiling.
347  *
348  * MPALMOSTSAFE
349  */
350 int
351 sys_profil(struct profil_args *uap)
352 {
353 	struct proc *p = curproc;
354 	struct uprof *upp;
355 
356 	if (uap->scale > (1 << 16))
357 		return (EINVAL);
358 	get_mplock();
359 	if (uap->scale == 0) {
360 		stopprofclock(p);
361 	} else {
362 		upp = &p->p_prof;
363 
364 		/* Block profile interrupts while changing state. */
365 		crit_enter();
366 		upp->pr_off = uap->offset;
367 		upp->pr_scale = uap->scale;
368 		upp->pr_base = uap->samples;
369 		upp->pr_size = uap->size;
370 		startprofclock(p);
371 		crit_exit();
372 	}
373 	rel_mplock();
374 	return (0);
375 }
376 
377 /*
378  * Scale is a fixed-point number with the binary point 16 bits
379  * into the value, and is <= 1.0.  pc is at most 32 bits, so the
380  * intermediate result is at most 48 bits.
381  */
382 #define	PC_TO_INDEX(pc, prof) \
383 	((int)(((u_quad_t)((pc) - (prof)->pr_off) * \
384 	    (u_quad_t)((prof)->pr_scale)) >> 16) & ~1)
385 
386 /*
387  * Collect user-level profiling statistics; called on a profiling tick,
388  * when a process is running in user-mode.  This routine may be called
389  * from an interrupt context.  We try to update the user profiling buffers
390  * cheaply with fuswintr() and suswintr().  If that fails, we revert to
391  * an AST that will vector us to trap() with a context in which copyin
392  * and copyout will work.  Trap will then call addupc_task().
393  *
394  * XXX fuswintr() and suswintr() never worked (always returnde -1), remove
395  * them.  It's just a bad idea to try to do this from a hard interrupt.
396  *
397  * Note that we may (rarely) not get around to the AST soon enough, and
398  * lose profile ticks when the next tick overwrites this one, but in this
399  * case the system is overloaded and the profile is probably already
400  * inaccurate.
401  */
402 void
403 addupc_intr(struct proc *p, u_long pc, u_int ticks)
404 {
405 	struct uprof *prof;
406 	caddr_t addr;
407 	u_int i;
408 
409 	if (ticks == 0)
410 		return;
411 	prof = &p->p_prof;
412 	if (pc < prof->pr_off ||
413 	    (i = PC_TO_INDEX(pc, prof)) >= prof->pr_size)
414 		return;			/* out of range; ignore */
415 
416 	addr = prof->pr_base + i;
417 	prof->pr_addr = pc;
418 	prof->pr_ticks = ticks;
419 	need_proftick();
420 }
421 
422 /*
423  * Much like before, but we can afford to take faults here.  If the
424  * update fails, we simply turn off profiling.
425  */
426 void
427 addupc_task(struct proc *p, u_long pc, u_int ticks)
428 {
429 	struct uprof *prof;
430 	caddr_t addr;
431 	u_int i;
432 	u_short v;
433 
434 	/* Testing P_PROFIL may be unnecessary, but is certainly safe. */
435 	if ((p->p_flags & P_PROFIL) == 0 || ticks == 0)
436 		return;
437 
438 	prof = &p->p_prof;
439 	if (pc < prof->pr_off ||
440 	    (i = PC_TO_INDEX(pc, prof)) >= prof->pr_size)
441 		return;
442 
443 	addr = prof->pr_base + i;
444 	if (copyin(addr, (caddr_t)&v, sizeof(v)) == 0) {
445 		v += ticks;
446 		if (copyout((caddr_t)&v, addr, sizeof(v)) == 0)
447 			return;
448 	}
449 	stopprofclock(p);
450 }
451