1 /* $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $ */ 2 /* $DragonFly: src/sys/netinet6/udp6_output.c,v 1.4 2003/06/25 03:56:04 dillon Exp $ */ 3 /* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */ 4 5 /* 6 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. Neither the name of the project nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34 /* 35 * Copyright (c) 1982, 1986, 1989, 1993 36 * The Regents of the University of California. All rights reserved. 37 * 38 * Redistribution and use in source and binary forms, with or without 39 * modification, are permitted provided that the following conditions 40 * are met: 41 * 1. Redistributions of source code must retain the above copyright 42 * notice, this list of conditions and the following disclaimer. 43 * 2. Redistributions in binary form must reproduce the above copyright 44 * notice, this list of conditions and the following disclaimer in the 45 * documentation and/or other materials provided with the distribution. 46 * 3. All advertising materials mentioning features or use of this software 47 * must display the following acknowledgement: 48 * This product includes software developed by the University of 49 * California, Berkeley and its contributors. 50 * 4. Neither the name of the University nor the names of its contributors 51 * may be used to endorse or promote products derived from this software 52 * without specific prior written permission. 53 * 54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 64 * SUCH DAMAGE. 65 * 66 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93 67 */ 68 69 #include "opt_ipsec.h" 70 #include "opt_inet.h" 71 #include "opt_inet6.h" 72 73 #include <sys/param.h> 74 #include <sys/malloc.h> 75 #include <sys/mbuf.h> 76 #include <sys/protosw.h> 77 #include <sys/socket.h> 78 #include <sys/socketvar.h> 79 #include <sys/sysctl.h> 80 #include <sys/errno.h> 81 #include <sys/stat.h> 82 #include <sys/systm.h> 83 #include <sys/proc.h> 84 #include <sys/syslog.h> 85 86 #include <net/if.h> 87 #include <net/route.h> 88 #include <net/if_types.h> 89 90 #include <netinet/in.h> 91 #include <netinet/in_var.h> 92 #include <netinet/in_systm.h> 93 #include <netinet/ip.h> 94 #include <netinet/ip_var.h> 95 #include <netinet/in_pcb.h> 96 #include <netinet/udp.h> 97 #include <netinet/udp_var.h> 98 #include <netinet/ip6.h> 99 #include <netinet6/ip6_var.h> 100 #include <netinet6/in6_pcb.h> 101 #include <netinet6/udp6_var.h> 102 #include <netinet/icmp6.h> 103 #include <netinet6/ip6protosw.h> 104 105 #ifdef IPSEC 106 #include <netinet6/ipsec.h> 107 #ifdef INET6 108 #include <netinet6/ipsec6.h> 109 #endif 110 #endif /* IPSEC */ 111 112 #include <net/net_osdep.h> 113 114 /* 115 * UDP protocol inplementation. 116 * Per RFC 768, August, 1980. 117 */ 118 119 #define in6pcb inpcb 120 #define udp6stat udpstat 121 #define udp6s_opackets udps_opackets 122 123 int 124 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6, 125 struct mbuf *control, struct thread *td) 126 { 127 u_int32_t ulen = m->m_pkthdr.len; 128 u_int32_t plen = sizeof(struct udphdr) + ulen; 129 struct ip6_hdr *ip6; 130 struct udphdr *udp6; 131 struct in6_addr *laddr, *faddr; 132 u_short fport; 133 int error = 0; 134 struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts; 135 int priv; 136 int af = AF_INET6, hlen = sizeof(struct ip6_hdr); 137 int flags; 138 struct sockaddr_in6 tmp; 139 140 priv = !suser(td); /* 1 if privilaged, 0 if not */ 141 if (control) { 142 if ((error = ip6_setpktoptions(control, &opt, priv, 0)) != 0) 143 goto release; 144 in6p->in6p_outputopts = &opt; 145 } 146 147 if (addr6) { 148 /* 149 * IPv4 version of udp_output calls in_pcbconnect in this case, 150 * which needs splnet and affects performance. 151 * Since we saw no essential reason for calling in_pcbconnect, 152 * we get rid of such kind of logic, and call in6_selectsrc 153 * and in6_pcbsetport in order to fill in the local address 154 * and the local port. 155 */ 156 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6; 157 if (sin6->sin6_port == 0) { 158 error = EADDRNOTAVAIL; 159 goto release; 160 } 161 162 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) { 163 /* how about ::ffff:0.0.0.0 case? */ 164 error = EISCONN; 165 goto release; 166 } 167 168 /* protect *sin6 from overwrites */ 169 tmp = *sin6; 170 sin6 = &tmp; 171 172 faddr = &sin6->sin6_addr; 173 fport = sin6->sin6_port; /* allow 0 port */ 174 175 if (IN6_IS_ADDR_V4MAPPED(faddr)) { 176 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) { 177 /* 178 * I believe we should explicitly discard the 179 * packet when mapped addresses are disabled, 180 * rather than send the packet as an IPv6 one. 181 * If we chose the latter approach, the packet 182 * might be sent out on the wire based on the 183 * default route, the situation which we'd 184 * probably want to avoid. 185 * (20010421 jinmei@kame.net) 186 */ 187 error = EINVAL; 188 goto release; 189 } else 190 af = AF_INET; 191 } 192 193 /* KAME hack: embed scopeid */ 194 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) { 195 error = EINVAL; 196 goto release; 197 } 198 199 if (!IN6_IS_ADDR_V4MAPPED(faddr)) { 200 laddr = in6_selectsrc(sin6, in6p->in6p_outputopts, 201 in6p->in6p_moptions, 202 &in6p->in6p_route, 203 &in6p->in6p_laddr, &error); 204 } else 205 laddr = &in6p->in6p_laddr; /* XXX */ 206 if (laddr == NULL) { 207 if (error == 0) 208 error = EADDRNOTAVAIL; 209 goto release; 210 } 211 if (in6p->in6p_lport == 0 && 212 (error = in6_pcbsetport(laddr, in6p, td)) != 0) 213 goto release; 214 } else { 215 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) { 216 error = ENOTCONN; 217 goto release; 218 } 219 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) { 220 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) { 221 /* 222 * XXX: this case would happen when the 223 * application sets the V6ONLY flag after 224 * connecting the foreign address. 225 * Such applications should be fixed, 226 * so we bark here. 227 */ 228 log(LOG_INFO, "udp6_output: IPV6_V6ONLY " 229 "option was set for a connected socket\n"); 230 error = EINVAL; 231 goto release; 232 } else 233 af = AF_INET; 234 } 235 laddr = &in6p->in6p_laddr; 236 faddr = &in6p->in6p_faddr; 237 fport = in6p->in6p_fport; 238 } 239 240 if (af == AF_INET) 241 hlen = sizeof(struct ip); 242 243 /* 244 * Calculate data length and get a mbuf 245 * for UDP and IP6 headers. 246 */ 247 M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT); 248 if (m == 0) { 249 error = ENOBUFS; 250 goto release; 251 } 252 253 /* 254 * Stuff checksum and output datagram. 255 */ 256 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen); 257 udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */ 258 udp6->uh_dport = fport; 259 if (plen <= 0xffff) 260 udp6->uh_ulen = htons((u_short)plen); 261 else 262 udp6->uh_ulen = 0; 263 udp6->uh_sum = 0; 264 265 switch (af) { 266 case AF_INET6: 267 ip6 = mtod(m, struct ip6_hdr *); 268 ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK; 269 ip6->ip6_vfc &= ~IPV6_VERSION_MASK; 270 ip6->ip6_vfc |= IPV6_VERSION; 271 #if 0 /* ip6_plen will be filled in ip6_output. */ 272 ip6->ip6_plen = htons((u_short)plen); 273 #endif 274 ip6->ip6_nxt = IPPROTO_UDP; 275 ip6->ip6_hlim = in6_selecthlim(in6p, 276 in6p->in6p_route.ro_rt ? 277 in6p->in6p_route.ro_rt->rt_ifp : NULL); 278 ip6->ip6_src = *laddr; 279 ip6->ip6_dst = *faddr; 280 281 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP, 282 sizeof(struct ip6_hdr), plen)) == 0) { 283 udp6->uh_sum = 0xffff; 284 } 285 286 flags = 0; 287 288 udp6stat.udp6s_opackets++; 289 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route, 290 flags, in6p->in6p_moptions, NULL, in6p); 291 break; 292 case AF_INET: 293 error = EAFNOSUPPORT; 294 goto release; 295 } 296 goto releaseopt; 297 298 release: 299 m_freem(m); 300 301 releaseopt: 302 if (control) { 303 ip6_clearpktopts(in6p->in6p_outputopts, 0, -1); 304 in6p->in6p_outputopts = stickyopt; 305 m_freem(control); 306 } 307 return(error); 308 } 309