xref: /dragonfly/sys/netinet6/udp6_output.c (revision b8c93cad)
1 /*	$FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $	*/
2 /*	$KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $	*/
3 
4 /*
5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the project nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32 
33 /*
34  * Copyright (c) 1982, 1986, 1989, 1993
35  *	The Regents of the University of California.  All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  * 1. Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  * 2. Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in the
44  *    documentation and/or other materials provided with the distribution.
45  * 3. Neither the name of the University nor the names of its contributors
46  *    may be used to endorse or promote products derived from this software
47  *    without specific prior written permission.
48  *
49  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59  * SUCH DAMAGE.
60  *
61  *	@(#)udp_var.h	8.1 (Berkeley) 6/10/93
62  */
63 
64 #include "opt_ipsec.h"
65 #include "opt_inet.h"
66 #include "opt_inet6.h"
67 
68 #include <sys/param.h>
69 #include <sys/malloc.h>
70 #include <sys/mbuf.h>
71 #include <sys/protosw.h>
72 #include <sys/socket.h>
73 #include <sys/socketvar.h>
74 #include <sys/sysctl.h>
75 #include <sys/errno.h>
76 #include <sys/stat.h>
77 #include <sys/systm.h>
78 #include <sys/proc.h>
79 #include <sys/priv.h>
80 #include <sys/syslog.h>
81 
82 #include <net/if.h>
83 #include <net/route.h>
84 #include <net/if_types.h>
85 
86 #include <netinet/in.h>
87 #include <netinet/in_var.h>
88 #include <netinet/in_systm.h>
89 #include <netinet/ip.h>
90 #include <netinet/ip_var.h>
91 #include <netinet/in_pcb.h>
92 #include <netinet/udp.h>
93 #include <netinet/udp_var.h>
94 #include <netinet/ip6.h>
95 #include <netinet6/ip6_var.h>
96 #include <netinet6/in6_pcb.h>
97 #include <netinet6/udp6_var.h>
98 #include <netinet/icmp6.h>
99 #include <netinet6/ip6protosw.h>
100 
101 #ifdef IPSEC
102 #include <netinet6/ipsec.h>
103 #ifdef INET6
104 #include <netinet6/ipsec6.h>
105 #endif
106 #endif /* IPSEC */
107 
108 #include <net/net_osdep.h>
109 
110 /*
111  * UDP protocol inplementation.
112  * Per RFC 768, August, 1980.
113  */
114 
115 #define in6pcb		inpcb
116 #define udp6stat	udp_stat
117 #define udp6s_opackets	udps_opackets
118 
119 int
120 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
121 	    struct mbuf *control, struct thread *td)
122 {
123 	u_int32_t ulen = m->m_pkthdr.len;
124 	u_int32_t plen = sizeof(struct udphdr) + ulen;
125 	struct ip6_hdr *ip6;
126 	struct udphdr *udp6;
127 	struct in6_addr *laddr, *faddr;
128 	u_short fport;
129 	int error = 0;
130 	struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
131 	int priv;
132 	int hlen = sizeof(struct ip6_hdr);
133 	struct sockaddr_in6 tmp;
134 
135 	priv = !priv_check(td, PRIV_ROOT);	/* 1 if privileged, 0 if not */
136 	if (control) {
137 		if ((error = ip6_setpktoptions(control, &opt,
138 		    in6p->in6p_outputopts,
139 		    IPPROTO_UDP, priv)) != 0)
140 			goto release;
141 		in6p->in6p_outputopts = &opt;
142 	}
143 
144 	if (addr6) {
145 		/*
146 		 * IPv4 version of udp_output calls in_pcbconnect in this case,
147 		 * which needs splnet and affects performance.
148 		 * Since we saw no essential reason for calling in_pcbconnect,
149 		 * we get rid of such kind of logic, and call in6_selectsrc
150 		 * and in6_pcbsetlport in order to fill in the local address
151 		 * and the local port.
152 		 */
153 		struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
154 
155 		/* Caller should have rejected the v4-mapped address */
156 		KASSERT(!IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr),
157 		    ("v4-mapped address"));
158 
159 		if (sin6->sin6_port == 0) {
160 			error = EADDRNOTAVAIL;
161 			goto release;
162 		}
163 
164 		if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
165 			/* how about ::ffff:0.0.0.0 case? */
166 			error = EISCONN;
167 			goto release;
168 		}
169 		if (!prison_remote_ip(td, addr6)) {
170 			error = EAFNOSUPPORT; /* IPv4 only jail */
171 			goto release;
172 		}
173 
174 		/* protect *sin6 from overwrites */
175 		tmp = *sin6;
176 		sin6 = &tmp;
177 
178 		faddr = &sin6->sin6_addr;
179 		fport = sin6->sin6_port; /* allow 0 port */
180 
181 		/* KAME hack: embed scopeid */
182 		if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
183 			error = EINVAL;
184 			goto release;
185 		}
186 
187 		laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
188 				      in6p->in6p_moptions,
189 				      &in6p->in6p_route,
190 				      &in6p->in6p_laddr, &error, NULL);
191 		if (laddr == NULL) {
192 			if (error == 0)
193 				error = EADDRNOTAVAIL;
194 			goto release;
195 		}
196 		if (in6p->in6p_lport == 0 &&
197 		    (error = in6_pcbsetlport(laddr, in6p, td)) != 0)
198 			goto release;
199 	} else {
200 		if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
201 			error = ENOTCONN;
202 			goto release;
203 		}
204 
205 		/* Connection to v4-mapped address should have been rejected */
206 		KASSERT(!IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr),
207 		    ("bound to v4-mapped address"));
208 
209 		laddr = &in6p->in6p_laddr;
210 		faddr = &in6p->in6p_faddr;
211 		fport = in6p->in6p_fport;
212 	}
213 
214 	/*
215 	 * Calculate data length and get a mbuf
216 	 * for UDP and IP6 headers.
217 	 */
218 	M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
219 	if (m == NULL) {
220 		error = ENOBUFS;
221 		goto release;
222 	}
223 
224 	/*
225 	 * Stuff checksum and output datagram.
226 	 */
227 	udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
228 	udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
229 	udp6->uh_dport = fport;
230 	if (plen <= 0xffff)
231 		udp6->uh_ulen = htons((u_short)plen);
232 	else
233 		udp6->uh_ulen = 0;
234 	udp6->uh_sum = 0;
235 
236 	ip6 = mtod(m, struct ip6_hdr *);
237 	ip6->ip6_flow	= in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
238 	ip6->ip6_vfc 	&= ~IPV6_VERSION_MASK;
239 	ip6->ip6_vfc 	|= IPV6_VERSION;
240 #if 0				/* ip6_plen will be filled in ip6_output. */
241 	ip6->ip6_plen	= htons((u_short)plen);
242 #endif
243 	ip6->ip6_nxt	= IPPROTO_UDP;
244 	ip6->ip6_hlim	= in6_selecthlim(in6p,
245 					 in6p->in6p_route.ro_rt ?
246 					 in6p->in6p_route.ro_rt->rt_ifp : NULL);
247 	ip6->ip6_src	= *laddr;
248 	ip6->ip6_dst	= *faddr;
249 
250 	if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
251 			sizeof(struct ip6_hdr), plen)) == 0) {
252 		udp6->uh_sum = 0xffff;
253 	}
254 
255 	udp6stat.udp6s_opackets++;
256 	error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route, 0,
257 	    in6p->in6p_moptions, NULL, in6p);
258 	goto releaseopt;
259 
260 release:
261 	m_freem(m);
262 
263 releaseopt:
264 	if (control) {
265 		ip6_clearpktopts(in6p->in6p_outputopts, -1);
266 		in6p->in6p_outputopts = stickyopt;
267 		m_freem(control);
268 	}
269 	return (error);
270 }
271