xref: /dragonfly/sys/netinet6/udp6_usrreq.c (revision bb8c85ff)
1 /*	$FreeBSD: src/sys/netinet6/udp6_usrreq.c,v 1.6.2.13 2003/01/24 05:11:35 sam Exp $	*/
2 /*	$KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $	*/
3 
4 /*
5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the project nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32 
33 /*
34  * Copyright (c) 1982, 1986, 1989, 1993
35  *	The Regents of the University of California.  All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  * 1. Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  * 2. Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in the
44  *    documentation and/or other materials provided with the distribution.
45  * 3. Neither the name of the University nor the names of its contributors
46  *    may be used to endorse or promote products derived from this software
47  *    without specific prior written permission.
48  *
49  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59  * SUCH DAMAGE.
60  *
61  *	@(#)udp_var.h	8.1 (Berkeley) 6/10/93
62  */
63 
64 #include "opt_inet.h"
65 #include "opt_inet6.h"
66 #include "opt_ipsec.h"
67 
68 #include <sys/param.h>
69 #include <sys/kernel.h>
70 #include <sys/mbuf.h>
71 #include <sys/protosw.h>
72 #include <sys/socket.h>
73 #include <sys/socketvar.h>
74 #include <sys/sysctl.h>
75 #include <sys/errno.h>
76 #include <sys/stat.h>
77 #include <sys/systm.h>
78 #include <sys/syslog.h>
79 #include <sys/proc.h>
80 #include <sys/priv.h>
81 
82 #include <sys/thread2.h>
83 #include <sys/socketvar2.h>
84 #include <sys/msgport2.h>
85 
86 #include <net/if.h>
87 #include <net/route.h>
88 #include <net/if_types.h>
89 #include <net/netisr2.h>
90 
91 #include <netinet/in.h>
92 #include <netinet/in_systm.h>
93 #include <netinet/ip.h>
94 #include <netinet/in_pcb.h>
95 #include <netinet/in_var.h>
96 #include <netinet/ip_var.h>
97 #include <netinet/udp.h>
98 #include <netinet/udp_var.h>
99 #include <netinet/ip6.h>
100 #include <netinet6/ip6_var.h>
101 #include <netinet6/in6_pcb.h>
102 #include <netinet/icmp6.h>
103 #include <netinet6/udp6_var.h>
104 #include <netinet6/ip6protosw.h>
105 
106 #ifdef IPSEC
107 #include <netinet6/ipsec.h>
108 #include <netinet6/ipsec6.h>
109 #endif /* IPSEC */
110 
111 #ifdef FAST_IPSEC
112 #include <netproto/ipsec/ipsec.h>
113 #include <netproto/ipsec/ipsec6.h>
114 #endif /* FAST_IPSEC */
115 
116 /*
117  * UDP protocol inplementation.
118  * Per RFC 768, August, 1980.
119  */
120 
121 extern	struct protosw inetsw[];
122 static	int in6_mcmatch (struct inpcb *, struct in6_addr *, struct ifnet *);
123 
124 static int
125 in6_mcmatch(struct inpcb *in6p, struct in6_addr *ia6, struct ifnet *ifp)
126 {
127 	struct ip6_moptions *im6o = in6p->in6p_moptions;
128 	struct in6_multi_mship *imm;
129 
130 	if (im6o == NULL)
131 		return 0;
132 
133 	for (imm = im6o->im6o_memberships.lh_first; imm != NULL;
134 	     imm = imm->i6mm_chain.le_next) {
135 		if ((ifp == NULL ||
136 		     imm->i6mm_maddr->in6m_ifp == ifp) &&
137 		    IN6_ARE_ADDR_EQUAL(&imm->i6mm_maddr->in6m_addr,
138 				       ia6))
139 			return 1;
140 	}
141 	return 0;
142 }
143 
144 int
145 udp6_input(struct mbuf **mp, int *offp, int proto)
146 {
147 	struct mbuf *m = *mp;
148 	struct ip6_hdr *ip6;
149 	struct udphdr *uh;
150 	struct inpcb *in6p;
151 	struct  mbuf *opts = NULL;
152 	int off = *offp;
153 	int plen, ulen;
154 	struct sockaddr_in6 udp_in6;
155 	struct socket *so;
156 	struct inpcbinfo *pcbinfo = &udbinfo[0];
157 
158 	IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
159 
160 	ip6 = mtod(m, struct ip6_hdr *);
161 
162 	udp_stat.udps_ipackets++;
163 
164 	plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
165 	uh = (struct udphdr *)((caddr_t)ip6 + off);
166 	ulen = ntohs((u_short)uh->uh_ulen);
167 
168 	if (plen != ulen) {
169 		udp_stat.udps_badlen++;
170 		goto bad;
171 	}
172 
173 	/*
174 	 * Checksum extended UDP header and data.
175 	 */
176 	if (uh->uh_sum == 0)
177 		udp_stat.udps_nosum++;
178 	else if (in6_cksum(m, IPPROTO_UDP, off, ulen) != 0) {
179 		udp_stat.udps_badsum++;
180 		goto bad;
181 	}
182 
183 	if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
184 		struct	inpcb *last, *marker;
185 
186 		/*
187 		 * Deliver a multicast datagram to all sockets
188 		 * for which the local and remote addresses and ports match
189 		 * those of the incoming datagram.  This allows more than
190 		 * one process to receive multicasts on the same port.
191 		 * (This really ought to be done for unicast datagrams as
192 		 * well, but that would cause problems with existing
193 		 * applications that open both address-specific sockets and
194 		 * a wildcard socket listening to the same port -- they would
195 		 * end up receiving duplicates of every unicast datagram.
196 		 * Those applications open the multiple sockets to overcome an
197 		 * inadequacy of the UDP socket interface, but for backwards
198 		 * compatibility we avoid the problem here rather than
199 		 * fixing the interface.  Maybe 4.5BSD will remedy this?)
200 		 */
201 
202 		/*
203 		 * In a case that laddr should be set to the link-local
204 		 * address (this happens in RIPng), the multicast address
205 		 * specified in the received packet does not match with
206 		 * laddr. To cure this situation, the matching is relaxed
207 		 * if the receiving interface is the same as one specified
208 		 * in the socket and if the destination multicast address
209 		 * matches one of the multicast groups specified in the socket.
210 		 */
211 
212 		/*
213 		 * Construct sockaddr format source address.
214 		 */
215 		init_sin6(&udp_in6, m); /* general init */
216 		udp_in6.sin6_port = uh->uh_sport;
217 		/*
218 		 * KAME note: traditionally we dropped udpiphdr from mbuf here.
219 		 * We need udphdr for IPsec processing so we do that later.
220 		 */
221 
222 		/*
223 		 * Locate pcb(s) for datagram.
224 		 * (Algorithm copied from raw_intr().)
225 		 */
226 		last = NULL;
227 
228 		marker = in_pcbmarker();
229 
230 		GET_PCBINFO_TOKEN(pcbinfo);
231 
232 		LIST_INSERT_HEAD(&pcbinfo->pcblisthead, marker, inp_list);
233 		while ((in6p = LIST_NEXT(marker, inp_list)) != NULL) {
234 			LIST_REMOVE(marker, inp_list);
235 			LIST_INSERT_AFTER(in6p, marker, inp_list);
236 
237 			if (in6p->inp_flags & INP_PLACEMARKER)
238 				continue;
239 			if (!INP_ISIPV6(in6p))
240 				continue;
241 			if (in6p->in6p_lport != uh->uh_dport)
242 				continue;
243 			if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) {
244 				if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr,
245 							&ip6->ip6_dst) &&
246 				    !in6_mcmatch(in6p, &ip6->ip6_dst,
247 						 m->m_pkthdr.rcvif))
248 					continue;
249 			}
250 			if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
251 				if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr,
252 							&ip6->ip6_src) ||
253 				   in6p->in6p_fport != uh->uh_sport)
254 					continue;
255 			}
256 
257 			if (last != NULL) {
258 				struct mbuf *n;
259 
260 #ifdef IPSEC
261 				/*
262 				 * Check AH/ESP integrity.
263 				 */
264 				if (ipsec6_in_reject_so(m, last->inp_socket))
265 					ipsec6stat.in_polvio++;
266 					/* do not inject data into pcb */
267 				else
268 #endif /* IPSEC */
269 #ifdef FAST_IPSEC
270 				/*
271 				 * Check AH/ESP integrity.
272 				 */
273 				if (ipsec6_in_reject(m, last))
274 					;
275 				else
276 #endif /* FAST_IPSEC */
277 				if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
278 					/*
279 					 * KAME NOTE: do not
280 					 * m_copy(m, offset, ...) above.
281 					 * ssb_appendaddr() expects M_PKTHDR,
282 					 * and m_copy() will copy M_PKTHDR
283 					 * only if offset is 0.
284 					 */
285 					so = last->in6p_socket;
286 					if ((last->in6p_flags & IN6P_CONTROLOPTS) ||
287 					    (so->so_options & SO_TIMESTAMP)) {
288 						ip6_savecontrol(last, &opts,
289 								ip6, n);
290 					}
291 					m_adj(n, off + sizeof(struct udphdr));
292 					lwkt_gettoken(&so->so_rcv.ssb_token);
293 					if (ssb_appendaddr(&so->so_rcv,
294 						    (struct sockaddr *)&udp_in6,
295 						    n, opts) == 0) {
296 						m_freem(n);
297 						if (opts)
298 							m_freem(opts);
299 						udp_stat.udps_fullsock++;
300 					} else {
301 						sorwakeup(so);
302 					}
303 					lwkt_reltoken(&so->so_rcv.ssb_token);
304 					opts = NULL;
305 				}
306 			}
307 			last = in6p;
308 			/*
309 			 * Don't look for additional matches if this one does
310 			 * not have either the SO_REUSEPORT or SO_REUSEADDR
311 			 * socket options set.  This heuristic avoids searching
312 			 * through all pcbs in the common case of a non-shared
313 			 * port.  It assumes that an application will never
314 			 * clear these options after setting them.
315 			 */
316 			if ((last->in6p_socket->so_options &
317 			     (SO_REUSEPORT | SO_REUSEADDR)) == 0)
318 				break;
319 		}
320 		LIST_REMOVE(marker, inp_list);
321 
322 		REL_PCBINFO_TOKEN(pcbinfo);
323 
324 		if (last == NULL) {
325 			/*
326 			 * No matching pcb found; discard datagram.
327 			 * (No need to send an ICMP Port Unreachable
328 			 * for a broadcast or multicast datgram.)
329 			 */
330 			udp_stat.udps_noport++;
331 			udp_stat.udps_noportmcast++;
332 			goto bad;
333 		}
334 #ifdef IPSEC
335 		/*
336 		 * Check AH/ESP integrity.
337 		 */
338 		if (ipsec6_in_reject_so(m, last->inp_socket)) {
339 			ipsec6stat.in_polvio++;
340 			goto bad;
341 		}
342 #endif /* IPSEC */
343 #ifdef FAST_IPSEC
344 		/*
345 		 * Check AH/ESP integrity.
346 		 */
347 		if (ipsec6_in_reject(m, last)) {
348 			goto bad;
349 		}
350 #endif /* FAST_IPSEC */
351 		if (last->in6p_flags & IN6P_CONTROLOPTS
352 		    || last->in6p_socket->so_options & SO_TIMESTAMP)
353 			ip6_savecontrol(last, &opts, ip6, m);
354 
355 		m_adj(m, off + sizeof(struct udphdr));
356 		so = last->in6p_socket;
357 		lwkt_gettoken(&so->so_rcv.ssb_token);
358 		if (ssb_appendaddr(&so->so_rcv, (struct sockaddr *)&udp_in6,
359 				   m, opts) == 0) {
360 			udp_stat.udps_fullsock++;
361 			lwkt_reltoken(&so->so_rcv.ssb_token);
362 			goto bad;
363 		}
364 		sorwakeup(so);
365 		lwkt_reltoken(&so->so_rcv.ssb_token);
366 		return IPPROTO_DONE;
367 	}
368 	/*
369 	 * Locate pcb for datagram.
370 	 */
371 	in6p = in6_pcblookup_hash(pcbinfo, &ip6->ip6_src, uh->uh_sport,
372 				  &ip6->ip6_dst, uh->uh_dport, 1,
373 				  m->m_pkthdr.rcvif);
374 	if (in6p == NULL) {
375 		if (log_in_vain) {
376 			char buf[INET6_ADDRSTRLEN];
377 
378 			strcpy(buf, ip6_sprintf(&ip6->ip6_dst));
379 			log(LOG_INFO,
380 			    "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
381 			    buf, ntohs(uh->uh_dport),
382 			    ip6_sprintf(&ip6->ip6_src), ntohs(uh->uh_sport));
383 		}
384 		udp_stat.udps_noport++;
385 		if (m->m_flags & M_MCAST) {
386 			kprintf("UDP6: M_MCAST is set in a unicast packet.\n");
387 			udp_stat.udps_noportmcast++;
388 			goto bad;
389 		}
390 		icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
391 		return IPPROTO_DONE;
392 	}
393 #ifdef IPSEC
394 	/*
395 	 * Check AH/ESP integrity.
396 	 */
397 	if (ipsec6_in_reject_so(m, in6p->in6p_socket)) {
398 		ipsec6stat.in_polvio++;
399 		goto bad;
400 	}
401 #endif /* IPSEC */
402 #ifdef FAST_IPSEC
403 	/*
404 	 * Check AH/ESP integrity.
405 	 */
406 	if (ipsec6_in_reject(m, in6p)) {
407 		goto bad;
408 	}
409 #endif /* FAST_IPSEC */
410 
411 	/*
412 	 * Construct sockaddr format source address.
413 	 * Stuff source address and datagram in user buffer.
414 	 */
415 	init_sin6(&udp_in6, m); /* general init */
416 	udp_in6.sin6_port = uh->uh_sport;
417 	if (in6p->in6p_flags & IN6P_CONTROLOPTS
418 	    || in6p->in6p_socket->so_options & SO_TIMESTAMP)
419 		ip6_savecontrol(in6p, &opts, ip6, m);
420 	m_adj(m, off + sizeof(struct udphdr));
421 	so = in6p->in6p_socket;
422 	lwkt_gettoken(&so->so_rcv.ssb_token);
423 	if (ssb_appendaddr(&so->so_rcv, (struct sockaddr *)&udp_in6,
424 			   m, opts) == 0) {
425 		udp_stat.udps_fullsock++;
426 		lwkt_reltoken(&so->so_rcv.ssb_token);
427 		goto bad;
428 	}
429 	sorwakeup(so);
430 	lwkt_reltoken(&so->so_rcv.ssb_token);
431 	return IPPROTO_DONE;
432 bad:
433 	if (m)
434 		m_freem(m);
435 	if (opts)
436 		m_freem(opts);
437 	return IPPROTO_DONE;
438 }
439 
440 void
441 udp6_ctlinput(netmsg_t msg)
442 {
443 	int cmd = msg->ctlinput.nm_cmd;
444 	struct sockaddr *sa = msg->ctlinput.nm_arg;
445 	void *d = msg->ctlinput.nm_extra;
446 	struct udphdr uh;
447 	struct ip6_hdr *ip6;
448 	struct mbuf *m;
449 	int off = 0;
450 	struct ip6ctlparam *ip6cp = NULL;
451 	const struct sockaddr_in6 *sa6_src = NULL;
452 	inp_notify_t notify = udp_notify;
453 	struct udp_portonly {
454 		u_int16_t uh_sport;
455 		u_int16_t uh_dport;
456 	} *uhp;
457 
458 	if (sa->sa_family != AF_INET6 ||
459 	    sa->sa_len != sizeof(struct sockaddr_in6))
460 		goto out;
461 
462 	if ((unsigned)cmd >= PRC_NCMDS)
463 		goto out;
464 	if (PRC_IS_REDIRECT(cmd))
465 		notify = in6_rtchange, d = NULL;
466 	else if (cmd == PRC_HOSTDEAD)
467 		d = NULL;
468 	else if (inet6ctlerrmap[cmd] == 0)
469 		goto out;
470 
471 	/* if the parameter is from icmp6, decode it. */
472 	if (d != NULL) {
473 		ip6cp = (struct ip6ctlparam *)d;
474 		m = ip6cp->ip6c_m;
475 		ip6 = ip6cp->ip6c_ip6;
476 		off = ip6cp->ip6c_off;
477 		sa6_src = ip6cp->ip6c_src;
478 	} else {
479 		m = NULL;
480 		ip6 = NULL;
481 		sa6_src = &sa6_any;
482 	}
483 
484 	if (ip6) {
485 		/*
486 		 * XXX: We assume that when IPV6 is non NULL,
487 		 * M and OFF are valid.
488 		 */
489 
490 		/* check if we can safely examine src and dst ports */
491 		if (m->m_pkthdr.len < off + sizeof(*uhp))
492 			return;
493 
494 		bzero(&uh, sizeof(uh));
495 		m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
496 
497 		in6_pcbnotify(&udbinfo[0], sa, uh.uh_dport,
498 			      (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport,
499 			      cmd, 0, notify);
500 	} else {
501 		in6_pcbnotify(&udbinfo[0], sa, 0,
502 			      (const struct sockaddr *)sa6_src, 0,
503 			      cmd, 0, notify);
504 	}
505 out:
506 	lwkt_replymsg(&msg->ctlinput.base.lmsg, 0);
507 }
508 
509 static int
510 udp6_getcred(SYSCTL_HANDLER_ARGS)
511 {
512 	struct sockaddr_in6 addrs[2];
513 	struct inpcb *inp;
514 	int error;
515 
516 	error = priv_check(req->td, PRIV_ROOT);
517 	if (error)
518 		return (error);
519 
520 	if (req->newlen != sizeof(addrs))
521 		return (EINVAL);
522 	if (req->oldlen != sizeof(struct ucred))
523 		return (EINVAL);
524 	error = SYSCTL_IN(req, addrs, sizeof(addrs));
525 	if (error)
526 		return (error);
527 	crit_enter();
528 	inp = in6_pcblookup_hash(&udbinfo[0], &addrs[1].sin6_addr,
529 				 addrs[1].sin6_port,
530 				 &addrs[0].sin6_addr, addrs[0].sin6_port,
531 				 1, NULL);
532 	if (!inp || !inp->inp_socket) {
533 		error = ENOENT;
534 		goto out;
535 	}
536 	error = SYSCTL_OUT(req, inp->inp_socket->so_cred,
537 			   sizeof(struct ucred));
538 
539 out:
540 	crit_exit();
541 	return (error);
542 }
543 
544 SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW,
545 	    0, 0,
546 	    udp6_getcred, "S,ucred", "Get the ucred of a UDP6 connection");
547 
548 /*
549  * NOTE: (so) is referenced from soabort*() and netmsg_pru_abort()
550  *	 will sofree() it when we return.
551  */
552 static void
553 udp6_abort(netmsg_t msg)
554 {
555 	struct socket *so = msg->abort.base.nm_so;
556 	struct inpcb *inp;
557 	int error;
558 
559 	inp = so->so_pcb;
560 	if (inp) {
561 		soisdisconnected(so);
562 
563 		in6_pcbdetach(inp);
564 		error = 0;
565 	} else {
566 		error = EINVAL;
567 	}
568 	lwkt_replymsg(&msg->abort.base.lmsg, error);
569 }
570 
571 static void
572 udp6_attach(netmsg_t msg)
573 {
574 	struct socket *so = msg->attach.base.nm_so;
575 	struct pru_attach_info *ai = msg->attach.nm_ai;
576 	struct inpcb *inp;
577 	int error;
578 
579 	inp = so->so_pcb;
580 	if (inp != NULL) {
581 		error = EINVAL;
582 		goto out;
583 	}
584 
585 	if (so->so_snd.ssb_hiwat == 0 || so->so_rcv.ssb_hiwat == 0) {
586 		error = soreserve(so, udp_sendspace, udp_recvspace,
587 		    ai->sb_rlimit);
588 		if (error)
589 			goto out;
590 	}
591 
592 	error = in_pcballoc(so, &udbinfo[0]);
593 	if (error)
594 		goto out;
595 
596 	inp = (struct inpcb *)so->so_pcb;
597 	inp->in6p_hops = -1;	/* use kernel default */
598 	inp->in6p_cksum = -1;	/* just to be sure */
599 	/*
600 	 * XXX: ugly!!
601 	 * IPv4 TTL initialization is necessary for an IPv6 socket as well,
602 	 * because the socket may be bound to an IPv6 wildcard address,
603 	 * which may match an IPv4-mapped IPv6 address.
604 	 */
605 	inp->inp_ip_ttl = ip_defttl;
606 	error = 0;
607 out:
608 	lwkt_replymsg(&msg->attach.base.lmsg, error);
609 }
610 
611 static void
612 udp6_bind(netmsg_t msg)
613 {
614 	struct socket *so =msg->bind.base.nm_so;
615 	struct sockaddr *nam = msg->bind.nm_nam;
616 	struct thread *td = msg->bind.nm_td;
617 	struct sockaddr_in6 *sin6_p = (struct sockaddr_in6 *)nam;
618 	struct inpcb *inp;
619 	int error;
620 
621 	inp = so->so_pcb;
622 	if (inp == NULL) {
623 		error = EINVAL;
624 		goto out;
625 	}
626 
627 	error = in6_pcbbind(inp, nam, td);
628 	if (error == 0) {
629 		if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
630 			inp->inp_flags |= INP_WASBOUND_NOTANY;
631 		in_pcbinswildcardhash(inp);
632 	}
633 out:
634 	lwkt_replymsg(&msg->bind.base.lmsg, error);
635 }
636 
637 static void
638 udp6_connect(netmsg_t msg)
639 {
640 	struct socket *so = msg->connect.base.nm_so;
641 	struct sockaddr *nam = msg->connect.nm_nam;
642 	struct thread *td = msg->connect.nm_td;
643 	struct sockaddr_in6 *sin6_p;
644 	struct inpcb *inp;
645 	int error;
646 
647 	inp = so->so_pcb;
648 	if (inp == NULL) {
649 		error = EINVAL;
650 		goto out;
651 	}
652 
653 	sin6_p = (struct sockaddr_in6 *)nam;
654 	if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
655 		error = EADDRNOTAVAIL;
656 		goto out;
657 	}
658 
659 	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
660 		error = EISCONN;
661 		goto out;
662 	}
663 	if (inp->inp_flags & INP_WILDCARD)
664 		in_pcbremwildcardhash(inp);
665 	if (!prison_remote_ip(td, nam)) {
666 		error = EAFNOSUPPORT; /* IPv4 only jail */
667 		goto out;
668 	}
669 	error = in6_pcbconnect(inp, nam, td);
670 	if (error == 0) {
671 		soisconnected(so);
672 	} else if (error == EAFNOSUPPORT) {	/* connection dissolved */
673 		/*
674 		 * Follow traditional BSD behavior and retain
675 		 * the local port binding.  But, fix the old misbehavior
676 		 * of overwriting any previously bound local address.
677 		 */
678 		if (!(inp->inp_flags & INP_WASBOUND_NOTANY))
679 			inp->in6p_laddr = kin6addr_any;
680 		in_pcbinswildcardhash(inp);
681 	}
682 out:
683 	lwkt_replymsg(&msg->connect.base.lmsg, error);
684 }
685 
686 static void
687 udp6_detach(netmsg_t msg)
688 {
689 	struct socket *so = msg->detach.base.nm_so;
690 	struct inpcb *inp;
691 	int error;
692 
693 	inp = so->so_pcb;
694 	if (inp) {
695 		in6_pcbdetach(inp);
696 		error = 0;
697 	} else {
698 		error = EINVAL;
699 	}
700 	lwkt_replymsg(&msg->detach.base.lmsg, error);
701 }
702 
703 static void
704 udp6_disconnect(netmsg_t msg)
705 {
706 	struct socket *so = msg->disconnect.base.nm_so;
707 	struct inpcb *inp;
708 	int error;
709 
710 	inp = so->so_pcb;
711 	if (inp == NULL) {
712 		error = EINVAL;
713 		goto out;
714 	}
715 
716 	if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
717 		error = ENOTCONN;
718 	} else {
719 		in6_pcbdisconnect(inp);
720 		soclrstate(so, SS_ISCONNECTED);		/* XXX */
721 		error = 0;
722 	}
723 out:
724 	lwkt_replymsg(&msg->disconnect.base.lmsg, error);
725 }
726 
727 static void
728 udp6_send(netmsg_t msg)
729 {
730 	struct socket *so = msg->send.base.nm_so;
731 	struct mbuf *m = msg->send.nm_m;
732 	struct sockaddr *addr = msg->send.nm_addr;
733 	struct mbuf *control = msg->send.nm_control;
734 	struct thread *td = msg->send.nm_td;
735 	struct inpcb *inp;
736 	int error = 0;
737 
738 	inp = so->so_pcb;
739 	if (inp == NULL) {
740 		error = EINVAL;
741 		goto bad;
742 	}
743 
744 	if (addr) {
745 		struct sockaddr_in6 *sin6;
746 
747 		if (addr->sa_len != sizeof(struct sockaddr_in6)) {
748 			error = EINVAL;
749 			goto bad;
750 		}
751 		if (addr->sa_family != AF_INET6) {
752 			error = EAFNOSUPPORT;
753 			goto bad;
754 		}
755 
756 		sin6 = (struct sockaddr_in6 *)addr;
757 		if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
758 			error = EADDRNOTAVAIL;
759 			goto bad;
760 		}
761 	}
762 
763 	error = udp6_output(inp, m, addr, control, td);
764 	lwkt_replymsg(&msg->send.base.lmsg, error);
765 	return;
766 bad:
767 	m_freem(m);
768 	lwkt_replymsg(&msg->send.base.lmsg, error);
769 }
770 
771 struct pr_usrreqs udp6_usrreqs = {
772 	.pru_abort = udp6_abort,
773 	.pru_accept = pr_generic_notsupp,
774 	.pru_attach = udp6_attach,
775 	.pru_bind = udp6_bind,
776 	.pru_connect = udp6_connect,
777 	.pru_connect2 = pr_generic_notsupp,
778 	.pru_control = in6_control_dispatch,
779 	.pru_detach = udp6_detach,
780 	.pru_disconnect = udp6_disconnect,
781 	.pru_listen = pr_generic_notsupp,
782 	.pru_peeraddr = in6_setpeeraddr_dispatch,
783 	.pru_rcvd = pr_generic_notsupp,
784 	.pru_rcvoob = pr_generic_notsupp,
785 	.pru_send = udp6_send,
786 	.pru_sense = pru_sense_null,
787 	.pru_shutdown = udp_shutdown,
788 	.pru_sockaddr = in6_setsockaddr_dispatch,
789 	.pru_sosend = sosend,
790 	.pru_soreceive = soreceive
791 };
792 
793