1 /*- 2 * Copyright (c) 1982, 1986, 1993 3 * The Regents of the University of California. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the University of 16 * California, Berkeley and its contributors. 17 * 4. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * @(#)protosw.h 8.1 (Berkeley) 6/2/93 34 * $FreeBSD: src/sys/sys/protosw.h,v 1.28.2.2 2001/07/03 11:02:01 ume Exp $ 35 */ 36 37 #ifndef _SYS_PROTOSW_H_ 38 #define _SYS_PROTOSW_H_ 39 40 #ifndef _SYS_TYPES_H_ 41 #include <sys/types.h> 42 #endif 43 44 /* Forward declare these structures referenced from prototypes below. */ 45 struct mbuf; 46 struct thread; 47 struct sockaddr; 48 struct socket; 49 struct sockopt; 50 51 struct pr_output_info { 52 pid_t p_pid; 53 }; 54 55 #if defined(_KERNEL) || defined(_KERNEL_STRUCTURES) 56 57 /* 58 * netmsg_t union of possible netmsgs typically sent to protocol threads. 59 */ 60 typedef union netmsg *netmsg_t; 61 62 /* 63 * Protocol switch table. 64 * 65 * Each protocol has a handle initializing one of these structures, 66 * which is used for protocol-protocol and system-protocol communication. 67 * 68 * A protocol is called through the pr_init entry before any other. 69 * Thereafter it is called every 200ms through the pr_fasttimo entry and 70 * every 500ms through the pr_slowtimo for timer based actions. 71 * The system will call the pr_drain entry if it is low on space and 72 * this should throw away any non-critical data. 73 * 74 * Protocols pass data between themselves as chains of mbufs using 75 * the pr_input and pr_output hooks. Pr_input passes data up (towards 76 * the users) and pr_output passes it down (towards the interfaces); control 77 * information passes up and down on pr_ctlinput and pr_ctloutput. 78 * The protocol is responsible for the space occupied by any the 79 * arguments to these entries and must dispose it. 80 * 81 * In retrospect, it would be a lot nicer to use an interface 82 * similar to the vnode VOP interface. 83 */ 84 struct protosw { 85 short pr_type; /* socket type used for */ 86 const struct domain *pr_domain; /* domain protocol a member of */ 87 short pr_protocol; /* protocol number */ 88 short pr_flags; /* see below */ 89 90 struct lwkt_port *(*pr_initport)(void); 91 /* initial msgport */ 92 93 /* 94 * Protocol hooks. These are typically called directly within the 95 * context of a protocol thread based on the toeplitz hash. 96 * 97 * pr_input() is called using the port supplied by the toeplitz 98 * hash via the netisr port function. 99 * 100 * pr_ctlinput() is called using the port supplied by pr_ctlport 101 * 102 * pr_ctloutput() and pr_output() are typically called 103 */ 104 int (*pr_input)(struct mbuf **, int *, int); 105 /* input to protocol (from below) */ 106 int (*pr_output)(struct mbuf *, struct socket *, ...); 107 /* output to protocol (from above) */ 108 void (*pr_ctlinput)(netmsg_t); 109 /* control input (from below) */ 110 void (*pr_ctloutput)(netmsg_t); 111 /* control output (from above) */ 112 struct lwkt_port *(*pr_ctlport)(int, struct sockaddr *, void *); 113 114 /* 115 * Utility hooks, not called with any particular context. 116 */ 117 void (*pr_init) (void); /* initialization hook */ 118 void (*pr_fasttimo) (void); /* fast timeout (200ms) */ 119 void (*pr_slowtimo) (void); /* slow timeout (500ms) */ 120 void (*pr_drain) (void); /* flush any excess space possible */ 121 122 struct pr_usrreqs *pr_usrreqs; /* messaged requests to proto thread */ 123 }; 124 125 #endif 126 127 #define PR_SLOWHZ 2 /* 2 slow timeouts per second */ 128 #define PR_FASTHZ 5 /* 5 fast timeouts per second */ 129 130 /* 131 * Values for pr_flags. 132 * PR_ADDR requires PR_ATOMIC; 133 * PR_ADDR and PR_CONNREQUIRED are mutually exclusive. 134 * PR_IMPLOPCL means that the protocol allows sendto without prior connect, 135 * and the protocol understands the MSG_EOF flag. The first property is 136 * is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed 137 * anyhow). 138 */ 139 #define PR_ATOMIC 0x01 /* exchange atomic messages only */ 140 #define PR_ADDR 0x02 /* addresses given with messages */ 141 #define PR_CONNREQUIRED 0x04 /* connection required by protocol */ 142 #define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */ 143 #define PR_RIGHTS 0x10 /* passes capabilities */ 144 #define PR_IMPLOPCL 0x20 /* implied open/close */ 145 #define PR_LASTHDR 0x40 /* enforce ipsec policy; last header */ 146 #define PR_ADDR_OPT 0x80 /* allow addresses during delivery */ 147 #define PR_MPSAFE 0x0100 /* protocal is MPSAFE */ 148 #define PR_SYNC_PORT 0x0200 /* synchronous port (no proto thrds) */ 149 #define PR_ASYNC_SEND 0x0400 /* async pru_send */ 150 #define PR_ASYNC_RCVD 0x0800 /* async pru_rcvd */ 151 #define PR_ASEND_HOLDTD 0x1000 /* async pru_send hold orig thread */ 152 #define PR_ACONN_HOLDTD 0x2000 /* async pru_connect hold orig thread */ 153 154 /* 155 * The arguments to usrreq are: 156 * (*protosw[].pr_usrreq)(up, req, m, nam, opt); 157 * where up is a (struct socket *), req is one of these requests, 158 * m is a optional mbuf chain containing a message, 159 * nam is an optional mbuf chain containing an address, 160 * and opt is a pointer to a socketopt structure or nil. 161 * The protocol is responsible for disposal of the mbuf chain m, 162 * the caller is responsible for any space held by nam and opt. 163 * A non-zero return from usrreq gives an 164 * UNIX error number which should be passed to higher level software. 165 */ 166 #define PRU_ATTACH 0 /* attach protocol to up */ 167 #define PRU_DETACH 1 /* detach protocol from up */ 168 #define PRU_BIND 2 /* bind socket to address */ 169 #define PRU_LISTEN 3 /* listen for connection */ 170 #define PRU_CONNECT 4 /* establish connection to peer */ 171 #define PRU_ACCEPT 5 /* accept connection from peer */ 172 #define PRU_DISCONNECT 6 /* disconnect from peer */ 173 #define PRU_SHUTDOWN 7 /* won't send any more data */ 174 #define PRU_RCVD 8 /* have taken data; more room now */ 175 #define PRU_SEND 9 /* send this data */ 176 #define PRU_ABORT 10 /* abort (fast DISCONNECT, DETATCH) */ 177 #define PRU_CONTROL 11 /* control operations on protocol */ 178 #define PRU_SENSE 12 /* return status into m */ 179 #define PRU_RCVOOB 13 /* retrieve out of band data */ 180 #define PRU_SENDOOB 14 /* send out of band data */ 181 #define PRU_SOCKADDR 15 /* fetch socket's address */ 182 #define PRU_PEERADDR 16 /* fetch peer's address */ 183 #define PRU_CONNECT2 17 /* connect two sockets */ 184 #define PRU_RESERVED1 18 /* formerly PRU_SOPOLL */ 185 /* begin for protocols internal use */ 186 #define PRU_FASTTIMO 19 /* 200ms timeout */ 187 #define PRU_SLOWTIMO 20 /* 500ms timeout */ 188 #define PRU_PROTORCV 21 /* receive from below */ 189 #define PRU_PROTOSEND 22 /* send to below */ 190 /* end for protocol's internal use */ 191 #define PRU_SEND_EOF 23 /* send and close */ 192 #define PRU_PRED 24 193 #define PRU_CTLOUTPUT 25 /* get/set opts */ 194 #define PRU_NREQ 26 195 196 #ifdef PRUREQUESTS 197 const char *prurequests[] = { 198 "ATTACH", "DETACH", "BIND", "LISTEN", 199 "CONNECT", "ACCEPT", "DISCONNECT", "SHUTDOWN", 200 "RCVD", "SEND", "ABORT", "CONTROL", 201 "SENSE", "RCVOOB", "SENDOOB", "SOCKADDR", 202 "PEERADDR", "CONNECT2", "", 203 "FASTTIMO", "SLOWTIMO", "PROTORCV", "PROTOSEND", 204 "SEND_EOF", "PREDICATE" 205 }; 206 #endif 207 208 #if defined(_KERNEL) || defined(_KERNEL_STRUCTURES) 209 210 struct ifnet; 211 struct stat; 212 struct ucred; 213 struct uio; 214 struct sockbuf; 215 216 struct pru_attach_info { 217 struct rlimit *sb_rlimit; 218 struct ucred *p_ucred; 219 struct vnode *fd_rdir; 220 }; 221 222 /* 223 * These are netmsg'd requests almost universally in the context of the 224 * appropriate protocol thread. Exceptions: 225 * 226 * pru_sosend() - called synchronously from user context, typically 227 * runs generic kernel code and then messages via 228 * pru_send(). 229 * 230 * pru_soreceive() - called synchronously from user context. Typically 231 * runs generic kernel code and remains synchronous. 232 * 233 * pru_preconnect() - called synchronously from user context. Typically 234 * prepares for later asynchronous pru_connect, e.g. 235 * sets ISCONNECTING. Non-NULL means asynchronous 236 * pru_connect is supported. 237 */ 238 struct pr_usrreqs { 239 void (*pru_abort) (netmsg_t msg); 240 void (*pru_accept) (netmsg_t msg); 241 void (*pru_attach) (netmsg_t msg); 242 void (*pru_bind) (netmsg_t msg); 243 void (*pru_connect) (netmsg_t msg); 244 void (*pru_connect2) (netmsg_t msg); 245 void (*pru_control) (netmsg_t msg); 246 /* 247 * If pru_detach() returns EJUSTRETURN, then protocol will 248 * call sodiscard() and sofree() for soclose(). 249 */ 250 void (*pru_detach) (netmsg_t msg); 251 void (*pru_disconnect) (netmsg_t msg); 252 void (*pru_listen) (netmsg_t msg); 253 void (*pru_peeraddr) (netmsg_t msg); 254 void (*pru_rcvd) (netmsg_t msg); 255 void (*pru_rcvoob) (netmsg_t msg); 256 void (*pru_send) (netmsg_t msg); 257 void (*pru_sense) (netmsg_t msg); 258 void (*pru_shutdown) (netmsg_t msg); 259 void (*pru_sockaddr) (netmsg_t msg); 260 261 /* 262 * These are direct calls. Note that sosend() will sometimes 263 * be converted into an implied connect (pru_connect) with the 264 * mbufs and flags forwarded in pru_connect's netmsg. It is 265 * otherwise typically converted to a send (pru_send). 266 * 267 * soreceive() typically remains synchronous in the user's context. 268 * 269 * Any converted calls are netmsg's to the socket's protocol thread. 270 */ 271 int (*pru_sosend) (struct socket *so, struct sockaddr *addr, 272 struct uio *uio, struct mbuf *top, 273 struct mbuf *control, int flags, 274 struct thread *td); 275 int (*pru_soreceive) (struct socket *so, 276 struct sockaddr **paddr, 277 struct uio *uio, 278 struct sockbuf *sio, 279 struct mbuf **controlp, int *flagsp); 280 281 /* 282 * Synchronously called by protocol thread. Typically save the 283 * foreign address into socket.so_faddr. 284 */ 285 void (*pru_savefaddr) (struct socket *so, 286 const struct sockaddr *addr); 287 288 /* synchronously called by user thread. */ 289 int (*pru_preconnect) (struct socket *so, 290 const struct sockaddr *addr, 291 struct thread *td); 292 }; 293 294 typedef int (*pru_sosend_fn_t) (struct socket *so, struct sockaddr *addr, 295 struct uio *uio, struct mbuf *top, 296 struct mbuf *control, int flags, 297 struct thread *td); 298 typedef int (*pru_soreceive_fn_t) (struct socket *so, struct sockaddr **paddr, 299 struct uio *uio, 300 struct sockbuf *sio, 301 struct mbuf **controlp, 302 int *flagsp); 303 304 void pr_generic_notsupp(netmsg_t msg); 305 void pru_sense_null(netmsg_t msg); 306 307 int pru_sosend_notsupp(struct socket *so, struct sockaddr *addr, 308 struct uio *uio, struct mbuf *top, 309 struct mbuf *control, int flags, 310 struct thread *td); 311 int pru_soreceive_notsupp(struct socket *so, 312 struct sockaddr **paddr, 313 struct uio *uio, 314 struct sockbuf *sio, 315 struct mbuf **controlp, int *flagsp); 316 317 struct lwkt_port *cpu0_soport(struct socket *, struct sockaddr *, 318 struct mbuf **); 319 struct lwkt_port *cpu0_ctlport(int, struct sockaddr *, void *); 320 321 #endif /* _KERNEL || _KERNEL_STRUCTURES */ 322 323 /* 324 * The arguments to the ctlinput routine are 325 * (*protosw[].pr_ctlinput)(cmd, sa, arg); 326 * where cmd is one of the commands below, sa is a pointer to a sockaddr, 327 * and arg is a `void *' argument used within a protocol family. 328 */ 329 #define PRC_IFDOWN 0 /* interface transition */ 330 #define PRC_ROUTEDEAD 1 /* select new route if possible ??? */ 331 #define PRC_IFUP 2 /* interface has come back up */ 332 #define PRC_QUENCH2 3 /* DEC congestion bit says slow down */ 333 #define PRC_QUENCH 4 /* some one said to slow down */ 334 #define PRC_MSGSIZE 5 /* message size forced drop */ 335 #define PRC_HOSTDEAD 6 /* host appears to be down */ 336 #define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */ 337 #define PRC_UNREACH_NET 8 /* no route to network */ 338 #define PRC_UNREACH_HOST 9 /* no route to host */ 339 #define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */ 340 #define PRC_UNREACH_PORT 11 /* bad port # */ 341 /* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */ 342 #define PRC_UNREACH_SRCFAIL 13 /* source route failed */ 343 #define PRC_REDIRECT_NET 14 /* net routing redirect */ 344 #define PRC_REDIRECT_HOST 15 /* host routing redirect */ 345 #define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */ 346 #define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */ 347 #define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */ 348 #define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */ 349 #define PRC_PARAMPROB 20 /* header incorrect */ 350 #define PRC_UNREACH_ADMIN_PROHIB 21 /* packet administrativly prohibited */ 351 352 #define PRC_NCMDS 22 353 354 #define PRC_IS_REDIRECT(cmd) \ 355 ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST) 356 357 #ifdef PRCREQUESTS 358 const char *prcrequests[] = { 359 "IFDOWN", "ROUTEDEAD", "IFUP", "DEC-BIT-QUENCH2", 360 "QUENCH", "MSGSIZE", "HOSTDEAD", "#7", 361 "NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH", 362 "#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT", 363 "TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS", 364 "PARAMPROB", "ADMIN-UNREACH" 365 }; 366 #endif 367 368 /* 369 * The arguments to ctloutput are: 370 * (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p); 371 * req is one of the actions listed below, so is a (struct socket *), 372 * level is an indication of which protocol layer the option is intended. 373 * optname is a protocol dependent socket option request, 374 * optval is a pointer to a mbuf-chain pointer, for value-return results. 375 * The protocol is responsible for disposal of the mbuf chain *optval 376 * if supplied, 377 * the caller is responsible for any space held by *optval, when returned. 378 * A non-zero return from usrreq gives an 379 * UNIX error number which should be passed to higher level software. 380 */ 381 #define PRCO_GETOPT 0 382 #define PRCO_SETOPT 1 383 384 #define PRCO_NCMDS 2 385 386 #ifdef PRCOREQUESTS 387 const char *prcorequests[] = { 388 "GETOPT", "SETOPT", 389 }; 390 #endif 391 392 /* 393 * Kernel prototypes 394 */ 395 #ifdef _KERNEL 396 397 void kpfctlinput (int, struct sockaddr *); 398 void kpfctlinput2 (int, struct sockaddr *, void *); 399 struct protosw *pffindproto (int family, int protocol, int type); 400 struct protosw *pffindtype (int family, int type); 401 402 #define PR_GET_MPLOCK(_pr) \ 403 do { \ 404 if (((_pr)->pr_flags & PR_MPSAFE) == 0) \ 405 get_mplock(); \ 406 } while (0) 407 408 #define PR_REL_MPLOCK(_pr) \ 409 do { \ 410 if (((_pr)->pr_flags & PR_MPSAFE) == 0) \ 411 rel_mplock(); \ 412 } while (0) 413 414 #endif /* _KERNEL */ 415 416 #endif /* _SYS_PROTOSW_H_ */ 417