1 /* 2 * Copyright (c) 2007 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@backplane.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * 3. Neither the name of The DragonFly Project nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific, prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * $DragonFly: src/sys/vfs/hammer/hammer_disk.h,v 1.55 2008/11/13 02:18:43 dillon Exp $ 35 */ 36 37 #ifndef VFS_HAMMER_DISK_H_ 38 #define VFS_HAMMER_DISK_H_ 39 40 #ifndef _SYS_UUID_H_ 41 #include <sys/uuid.h> 42 #endif 43 44 /* 45 * The structures below represent the on-disk format for a HAMMER 46 * filesystem. Note that all fields for on-disk structures are naturally 47 * aligned. The host endian format is used - compatibility is possible 48 * if the implementation detects reversed endian and adjusts data accordingly. 49 * 50 * Most of HAMMER revolves around the concept of an object identifier. An 51 * obj_id is a 64 bit quantity which uniquely identifies a filesystem object 52 * FOR THE ENTIRE LIFE OF THE FILESYSTEM. This uniqueness allows backups 53 * and mirrors to retain varying amounts of filesystem history by removing 54 * any possibility of conflict through identifier reuse. 55 * 56 * A HAMMER filesystem may span multiple volumes. 57 * 58 * A HAMMER filesystem uses a 16K filesystem buffer size. All filesystem 59 * I/O is done in multiples of 16K. 60 * 61 * 64K X-bufs are used for blocks >= a file's 1MB mark. 62 * 63 * Per-volume storage limit: 52 bits 4096 TB 64 * Per-Zone storage limit: 60 bits 1 MTB 65 * Per-filesystem storage limit: 60 bits 1 MTB 66 */ 67 #define HAMMER_BUFSIZE 16384 68 #define HAMMER_XBUFSIZE 65536 69 #define HAMMER_HBUFSIZE (HAMMER_BUFSIZE / 2) 70 #define HAMMER_XDEMARC (1024 * 1024) 71 #define HAMMER_BUFMASK (HAMMER_BUFSIZE - 1) 72 #define HAMMER_XBUFMASK (HAMMER_XBUFSIZE - 1) 73 74 #define HAMMER_BUFSIZE64 ((uint64_t)HAMMER_BUFSIZE) 75 #define HAMMER_BUFMASK64 ((uint64_t)HAMMER_BUFMASK) 76 77 #define HAMMER_XBUFSIZE64 ((uint64_t)HAMMER_XBUFSIZE) 78 #define HAMMER_XBUFMASK64 ((uint64_t)HAMMER_XBUFMASK) 79 80 #define HAMMER_OFF_ZONE_MASK 0xF000000000000000ULL /* zone portion */ 81 #define HAMMER_OFF_VOL_MASK 0x0FF0000000000000ULL /* volume portion */ 82 #define HAMMER_OFF_SHORT_MASK 0x000FFFFFFFFFFFFFULL /* offset portion */ 83 #define HAMMER_OFF_LONG_MASK 0x0FFFFFFFFFFFFFFFULL /* offset portion */ 84 85 #define HAMMER_OFF_BAD ((hammer_off_t)-1) 86 87 /* 88 * The current limit of volumes that can make up a HAMMER FS 89 */ 90 #define HAMMER_MAX_VOLUMES 256 91 92 /* 93 * Hammer transaction ids are 64 bit unsigned integers and are usually 94 * synchronized with the time of day in nanoseconds. 95 * 96 * Hammer offsets are used for FIFO indexing and embed a cycle counter 97 * and volume number in addition to the offset. Most offsets are required 98 * to be 16 KB aligned. 99 */ 100 typedef uint64_t hammer_tid_t; 101 typedef uint64_t hammer_off_t; 102 typedef uint32_t hammer_crc_t; 103 104 #define HAMMER_MIN_TID 0ULL /* unsigned */ 105 #define HAMMER_MAX_TID 0xFFFFFFFFFFFFFFFFULL /* unsigned */ 106 #define HAMMER_MIN_KEY -0x8000000000000000LL /* signed */ 107 #define HAMMER_MAX_KEY 0x7FFFFFFFFFFFFFFFLL /* signed */ 108 #define HAMMER_MIN_OBJID HAMMER_MIN_KEY /* signed */ 109 #define HAMMER_MAX_OBJID HAMMER_MAX_KEY /* signed */ 110 #define HAMMER_MIN_RECTYPE 0x0U /* unsigned */ 111 #define HAMMER_MAX_RECTYPE 0xFFFFU /* unsigned */ 112 #define HAMMER_MIN_OFFSET 0ULL /* unsigned */ 113 #define HAMMER_MAX_OFFSET 0xFFFFFFFFFFFFFFFFULL /* unsigned */ 114 115 /* 116 * hammer_off_t has several different encodings. Note that not all zones 117 * encode a vol_no. Zone bits are not a part of filesystem capacity. 118 * 119 * zone 0: available, a big-block that contains the offset is unused 120 * zone 1 (z,v,o): raw volume relative (offset 0 is the volume header) 121 * zone 2 (z,v,o): raw buffer relative (offset 0 is the first buffer) 122 * zone 3 (z,o): undo fifo - actually zone-2 address, fixed phys array in vol hdr 123 * zone 4 (z,v,o): freemap - only real blockmap 124 * zone 8 (z,v,o): B-Tree - actually zone-2 address 125 * zone 9 (z,v,o): meta - actually zone-2 address 126 * zone 10 (z,v,o): large-data - actually zone-2 address 127 * zone 11 (z,v,o): small-data - actually zone-2 address 128 * zone 15: unavailable, usually the offset is beyond volume size 129 * 130 * layer1/layer2 direct map: 131 * Maximum HAMMER filesystem capacity from volume aspect 132 * 2^8(max volumes) * 2^52(max volume size) = 2^60 = 1EB 133 * <-------------------------------------------------------------> 134 * 8bits 52bits 135 * <------><-----------------------------------------------------> 136 * zzzzvvvvvvvvoooo oooooooooooooooo oooooooooooooooo oooooooooooooooo 137 * ----111111111111 1111112222222222 222222222ooooooo oooooooooooooooo 138 * <-----------------><------------------><----------------------> 139 * 18bits 19bits 23bits 140 * <-------------------------------------------------------------> 141 * 2^18(layer1) * 2^19(layer2) * 2^23(big-block) = 2^60 = 1EB 142 * Maximum HAMMER filesystem capacity from blockmap aspect 143 */ 144 145 #define HAMMER_ZONE_RAW_VOLUME 0x1000000000000000ULL 146 #define HAMMER_ZONE_RAW_BUFFER 0x2000000000000000ULL 147 #define HAMMER_ZONE_UNDO 0x3000000000000000ULL 148 #define HAMMER_ZONE_FREEMAP 0x4000000000000000ULL 149 #define HAMMER_ZONE_RESERVED05 0x5000000000000000ULL /* not used */ 150 #define HAMMER_ZONE_RESERVED06 0x6000000000000000ULL /* not used */ 151 #define HAMMER_ZONE_RESERVED07 0x7000000000000000ULL /* not used */ 152 #define HAMMER_ZONE_BTREE 0x8000000000000000ULL 153 #define HAMMER_ZONE_META 0x9000000000000000ULL 154 #define HAMMER_ZONE_LARGE_DATA 0xA000000000000000ULL 155 #define HAMMER_ZONE_SMALL_DATA 0xB000000000000000ULL 156 #define HAMMER_ZONE_RESERVED0C 0xC000000000000000ULL /* not used */ 157 #define HAMMER_ZONE_RESERVED0D 0xD000000000000000ULL /* not used */ 158 #define HAMMER_ZONE_RESERVED0E 0xE000000000000000ULL /* not used */ 159 #define HAMMER_ZONE_UNAVAIL 0xF000000000000000ULL 160 161 #define HAMMER_ZONE_RAW_VOLUME_INDEX 1 162 #define HAMMER_ZONE_RAW_BUFFER_INDEX 2 163 #define HAMMER_ZONE_UNDO_INDEX 3 164 #define HAMMER_ZONE_FREEMAP_INDEX 4 165 #define HAMMER_ZONE_BTREE_INDEX 8 166 #define HAMMER_ZONE_META_INDEX 9 167 #define HAMMER_ZONE_LARGE_DATA_INDEX 10 168 #define HAMMER_ZONE_SMALL_DATA_INDEX 11 169 #define HAMMER_ZONE_UNAVAIL_INDEX 15 170 171 #define HAMMER_MAX_ZONES 16 172 173 #define HAMMER_ZONE(offset) ((offset) & HAMMER_OFF_ZONE_MASK) 174 175 #define hammer_is_zone_raw_volume(offset) \ 176 (HAMMER_ZONE(offset) == HAMMER_ZONE_RAW_VOLUME) 177 #define hammer_is_zone_raw_buffer(offset) \ 178 (HAMMER_ZONE(offset) == HAMMER_ZONE_RAW_BUFFER) 179 #define hammer_is_zone_undo(offset) \ 180 (HAMMER_ZONE(offset) == HAMMER_ZONE_UNDO) 181 #define hammer_is_zone_freemap(offset) \ 182 (HAMMER_ZONE(offset) == HAMMER_ZONE_FREEMAP) 183 #define hammer_is_zone_btree(offset) \ 184 (HAMMER_ZONE(offset) == HAMMER_ZONE_BTREE) 185 #define hammer_is_zone_meta(offset) \ 186 (HAMMER_ZONE(offset) == HAMMER_ZONE_META) 187 #define hammer_is_zone_large_data(offset) \ 188 (HAMMER_ZONE(offset) == HAMMER_ZONE_LARGE_DATA) 189 #define hammer_is_zone_small_data(offset) \ 190 (HAMMER_ZONE(offset) == HAMMER_ZONE_SMALL_DATA) 191 #define hammer_is_zone_unavail(offset) \ 192 (HAMMER_ZONE(offset) == HAMMER_ZONE_UNAVAIL) 193 194 /* 195 * Test if the zone is directly mapped to zone-2 offset via freemap. 196 */ 197 #define hammer_is_zone2_mapped_index(zone) \ 198 ((zone) >= HAMMER_ZONE_BTREE_INDEX && \ 199 (zone) < HAMMER_MAX_ZONES) 200 /* 201 * Test if the zone is directly mapped to zone-2 offset. The word 202 * directly here means the zone is neither RAW_VOLUME nor UNDO zone. 203 */ 204 #define hammer_is_direct_mapped_index(zone) \ 205 (((zone) == HAMMER_ZONE_RAW_BUFFER_INDEX) || \ 206 ((zone) == HAMMER_ZONE_FREEMAP_INDEX) || \ 207 hammer_is_zone2_mapped_index(zone)) 208 209 #define HAMMER_ZONE_ENCODE(zone, ham_off) \ 210 (((hammer_off_t)(zone) << 60) | (ham_off)) 211 #define HAMMER_ZONE_DECODE(ham_off) \ 212 ((int)(((hammer_off_t)(ham_off) >> 60))) 213 214 #define HAMMER_VOL_ENCODE(vol_no) \ 215 ((hammer_off_t)((vol_no) & 255) << 52) 216 #define HAMMER_VOL_DECODE(ham_off) \ 217 ((int)(((hammer_off_t)(ham_off) >> 52) & 255)) 218 219 #define HAMMER_OFF_SHORT_ENCODE(offset) \ 220 ((hammer_off_t)(offset) & HAMMER_OFF_SHORT_MASK) 221 #define HAMMER_OFF_LONG_ENCODE(offset) \ 222 ((hammer_off_t)(offset) & HAMMER_OFF_LONG_MASK) 223 224 #define HAMMER_ENCODE(zone, vol_no, offset) \ 225 (((hammer_off_t)(zone) << 60) | \ 226 HAMMER_VOL_ENCODE(vol_no) | \ 227 HAMMER_OFF_SHORT_ENCODE(offset)) 228 #define HAMMER_ENCODE_RAW_VOLUME(vol_no, offset) \ 229 HAMMER_ENCODE(HAMMER_ZONE_RAW_VOLUME_INDEX, vol_no, offset) 230 #define HAMMER_ENCODE_RAW_BUFFER(vol_no, offset) \ 231 HAMMER_ENCODE(HAMMER_ZONE_RAW_BUFFER_INDEX, vol_no, offset) 232 #define HAMMER_ENCODE_FREEMAP(vol_no, offset) \ 233 HAMMER_ENCODE(HAMMER_ZONE_FREEMAP_INDEX, vol_no, offset) 234 235 /* 236 * Translate a zone address to zone-X address. 237 */ 238 #define hammer_xlate_to_zoneX(zone, offset) \ 239 HAMMER_ZONE_ENCODE((zone), (offset) & ~HAMMER_OFF_ZONE_MASK) 240 #define hammer_xlate_to_zone2(offset) \ 241 hammer_xlate_to_zoneX(HAMMER_ZONE_RAW_BUFFER_INDEX, (offset)) 242 243 #define hammer_data_zone(data_len) \ 244 (((data_len) >= HAMMER_BUFSIZE) ? \ 245 HAMMER_ZONE_LARGE_DATA : \ 246 HAMMER_ZONE_SMALL_DATA) 247 #define hammer_data_zone_index(data_len) \ 248 (((data_len) >= HAMMER_BUFSIZE) ? \ 249 HAMMER_ZONE_LARGE_DATA_INDEX : \ 250 HAMMER_ZONE_SMALL_DATA_INDEX) 251 252 /* 253 * Big-Block backing store 254 * 255 * A blockmap is a two-level map which translates a blockmap-backed zone 256 * offset into a raw zone 2 offset. The layer 1 handles 18 bits and the 257 * layer 2 handles 19 bits. The 8M big-block size is 23 bits so two 258 * layers gives us 18+19+23 = 60 bits of address space. 259 * 260 * When using hinting for a blockmap lookup, the hint is lost when the 261 * scan leaves the HINTBLOCK, which is typically several BIGBLOCK's. 262 * HINTBLOCK is a heuristic. 263 */ 264 #define HAMMER_HINTBLOCK_SIZE (HAMMER_BIGBLOCK_SIZE * 4) 265 #define HAMMER_HINTBLOCK_MASK64 ((uint64_t)HAMMER_HINTBLOCK_SIZE - 1) 266 #define HAMMER_BIGBLOCK_SIZE (8192 * 1024) 267 #define HAMMER_BIGBLOCK_SIZE64 ((uint64_t)HAMMER_BIGBLOCK_SIZE) 268 #define HAMMER_BIGBLOCK_MASK (HAMMER_BIGBLOCK_SIZE - 1) 269 #define HAMMER_BIGBLOCK_MASK64 ((uint64_t)HAMMER_BIGBLOCK_SIZE - 1) 270 #define HAMMER_BIGBLOCK_BITS 23 271 #if 0 272 #define HAMMER_BIGBLOCK_OVERFILL (6144 * 1024) 273 #endif 274 #if (1 << HAMMER_BIGBLOCK_BITS) != HAMMER_BIGBLOCK_SIZE 275 #error "HAMMER_BIGBLOCK_BITS BROKEN" 276 #endif 277 278 #define HAMMER_BUFFERS_PER_BIGBLOCK \ 279 (HAMMER_BIGBLOCK_SIZE / HAMMER_BUFSIZE) 280 #define HAMMER_BUFFERS_PER_BIGBLOCK_MASK \ 281 (HAMMER_BUFFERS_PER_BIGBLOCK - 1) 282 #define HAMMER_BUFFERS_PER_BIGBLOCK_MASK64 \ 283 ((hammer_off_t)HAMMER_BUFFERS_PER_BIGBLOCK_MASK) 284 285 /* 286 * Maximum number of mirrors operating in master mode (multi-master 287 * clustering and mirroring). Note that HAMMER1 does not support 288 * multi-master clustering as of 2015. 289 */ 290 #define HAMMER_MAX_MASTERS 16 291 292 /* 293 * The blockmap is somewhat of a degenerate structure. HAMMER only actually 294 * uses it in its original incarnation to implement the freemap. 295 * 296 * zone:1 raw volume (no blockmap) 297 * zone:2 raw buffer (no blockmap) 298 * zone:3 undomap (direct layer2 array in volume header) 299 * zone:4 freemap (the only real blockmap) 300 * zone:8-15 zone id used to classify big-block only, address is actually 301 * a zone-2 address. 302 */ 303 struct hammer_blockmap { 304 hammer_off_t phys_offset; /* zone-2 physical offset */ 305 hammer_off_t first_offset; /* zone-X logical offset (zone 3) */ 306 hammer_off_t next_offset; /* zone-X logical offset */ 307 hammer_off_t alloc_offset; /* zone-X logical offset */ 308 uint32_t reserved01; 309 hammer_crc_t entry_crc; 310 }; 311 312 typedef struct hammer_blockmap *hammer_blockmap_t; 313 314 #define HAMMER_BLOCKMAP_CRCSIZE \ 315 offsetof(struct hammer_blockmap, entry_crc) 316 317 /* 318 * The blockmap is a 2-layer entity made up of big-blocks. The first layer 319 * contains 262144 32-byte entries (18 bits), the second layer contains 320 * 524288 16-byte entries (19 bits), representing 8MB (23 bit) blockmaps. 321 * 18+19+23 = 60 bits. The top four bits are the zone id. 322 * 323 * Currently only the freemap utilizes both layers in all their glory. 324 * All primary data/meta-data zones actually encode a zone-2 address 325 * requiring no real blockmap translation. 326 * 327 * The freemap uses the upper 8 bits of layer-1 to identify the volume, 328 * thus any space allocated via the freemap can be directly translated 329 * to a zone:2 (or zone:8-15) address. 330 * 331 * zone-X blockmap offset: [zone:4][layer1:18][layer2:19][big-block:23] 332 */ 333 334 /* 335 * 32 bytes layer1 entry for 8MB big-block. 336 * A big-block can hold 2^23 / 2^5 = 2^18 layer1 entries, 337 * which equals bits assigned for layer1 in zone-2 address. 338 */ 339 struct hammer_blockmap_layer1 { 340 hammer_off_t blocks_free; /* big-blocks free */ 341 hammer_off_t phys_offset; /* UNAVAIL or zone-2 */ 342 hammer_off_t reserved01; 343 hammer_crc_t layer2_crc; /* xor'd crc's of HAMMER_BLOCKSIZE */ 344 /* (not yet used) */ 345 hammer_crc_t layer1_crc; /* MUST BE LAST FIELD OF STRUCTURE*/ 346 }; 347 348 typedef struct hammer_blockmap_layer1 *hammer_blockmap_layer1_t; 349 350 #define HAMMER_LAYER1_CRCSIZE \ 351 offsetof(struct hammer_blockmap_layer1, layer1_crc) 352 353 /* 354 * 16 bytes layer2 entry for 8MB big-blocks. 355 * A big-block can hold 2^23 / 2^4 = 2^19 layer2 entries, 356 * which equals bits assigned for layer2 in zone-2 address. 357 * 358 * NOTE: bytes_free is signed and can legally go negative if/when data 359 * de-dup occurs. This field will never go higher than 360 * HAMMER_BIGBLOCK_SIZE. If exactly HAMMER_BIGBLOCK_SIZE 361 * the big-block is completely free. 362 */ 363 struct hammer_blockmap_layer2 { 364 uint8_t zone; /* typed allocation zone */ 365 uint8_t unused01; 366 uint16_t unused02; 367 uint32_t append_off; /* allocatable space index */ 368 int32_t bytes_free; /* bytes free within this big-block */ 369 hammer_crc_t entry_crc; 370 }; 371 372 typedef struct hammer_blockmap_layer2 *hammer_blockmap_layer2_t; 373 374 #define HAMMER_LAYER2_CRCSIZE \ 375 offsetof(struct hammer_blockmap_layer2, entry_crc) 376 377 #define HAMMER_BLOCKMAP_UNAVAIL ((hammer_off_t)-1LL) 378 379 #define HAMMER_BLOCKMAP_RADIX1 /* 2^18 = 262144 */ \ 380 ((int)(HAMMER_BIGBLOCK_SIZE / sizeof(struct hammer_blockmap_layer1))) 381 #define HAMMER_BLOCKMAP_RADIX2 /* 2^19 = 524288 */ \ 382 ((int)(HAMMER_BIGBLOCK_SIZE / sizeof(struct hammer_blockmap_layer2))) 383 384 #define HAMMER_BLOCKMAP_LAYER1 /* 2^(18+19+23) = 1EB */ \ 385 (HAMMER_BLOCKMAP_RADIX1 * HAMMER_BLOCKMAP_LAYER2) 386 #define HAMMER_BLOCKMAP_LAYER2 /* 2^(19+23) = 4TB */ \ 387 (HAMMER_BLOCKMAP_RADIX2 * HAMMER_BIGBLOCK_SIZE64) 388 389 #define HAMMER_BLOCKMAP_LAYER1_MASK (HAMMER_BLOCKMAP_LAYER1 - 1) 390 #define HAMMER_BLOCKMAP_LAYER2_MASK (HAMMER_BLOCKMAP_LAYER2 - 1) 391 392 /* 393 * Index within layer1 or layer2 big-block for the entry representing 394 * a zone-2 physical offset. 395 */ 396 #define HAMMER_BLOCKMAP_LAYER1_INDEX(zone2_offset) \ 397 ((int)(((zone2_offset) & HAMMER_BLOCKMAP_LAYER1_MASK) / \ 398 HAMMER_BLOCKMAP_LAYER2)) 399 400 #define HAMMER_BLOCKMAP_LAYER2_INDEX(zone2_offset) \ 401 ((int)(((zone2_offset) & HAMMER_BLOCKMAP_LAYER2_MASK) / \ 402 HAMMER_BIGBLOCK_SIZE64)) 403 404 /* 405 * Byte offset within layer1 or layer2 big-block for the entry representing 406 * a zone-2 physical offset. Multiply the index by sizeof(blockmap_layer). 407 */ 408 #define HAMMER_BLOCKMAP_LAYER1_OFFSET(zone2_offset) \ 409 (HAMMER_BLOCKMAP_LAYER1_INDEX(zone2_offset) * \ 410 sizeof(struct hammer_blockmap_layer1)) 411 412 #define HAMMER_BLOCKMAP_LAYER2_OFFSET(zone2_offset) \ 413 (HAMMER_BLOCKMAP_LAYER2_INDEX(zone2_offset) * \ 414 sizeof(struct hammer_blockmap_layer2)) 415 416 /* 417 * HAMMER UNDO parameters. The UNDO fifo is mapped directly in the volume 418 * header with an array of layer2 structures. A maximum of (128x8MB) = 1GB 419 * may be reserved. The size of the undo fifo is usually set a newfs time 420 * but can be adjusted if the filesystem is taken offline. 421 */ 422 #define HAMMER_UNDO_LAYER2 128 /* max layer2 undo mapping entries */ 423 424 /* 425 * All on-disk HAMMER structures which make up elements of the UNDO FIFO 426 * contain a hammer_fifo_head and hammer_fifo_tail structure. This structure 427 * contains all the information required to validate the fifo element 428 * and to scan the fifo in either direction. The head is typically embedded 429 * in higher level hammer on-disk structures while the tail is typically 430 * out-of-band. hdr_size is the size of the whole mess, including the tail. 431 * 432 * All undo structures are guaranteed to not cross a 16K filesystem 433 * buffer boundary. Most undo structures are fairly small. Data spaces 434 * are not immediately reused by HAMMER so file data is not usually recorded 435 * as part of an UNDO. 436 * 437 * PAD elements are allowed to take up only 8 bytes of space as a special 438 * case, containing only hdr_signature, hdr_type, and hdr_size fields, 439 * and with the tail overloaded onto the head structure for 8 bytes total. 440 * 441 * Every undo record has a sequence number. This number is unrelated to 442 * transaction ids and instead collects the undo transactions associated 443 * with a single atomic operation. A larger transactional operation, such 444 * as a remove(), may consist of several smaller atomic operations 445 * representing raw meta-data operations. 446 * 447 * HAMMER VERSION 4 CHANGES 448 * 449 * In HAMMER version 4 the undo structure alignment is reduced from 16384 450 * to 512 bytes in order to ensure that each 512 byte sector begins with 451 * a header. The reserved01 field in the header is now a 32 bit sequence 452 * number. This allows the recovery code to detect missing sectors 453 * without relying on the 32-bit crc and to definitively identify the current 454 * undo sequence space without having to rely on information from the volume 455 * header. In addition, new REDO entries in the undo space are used to 456 * record write, write/extend, and transaction id updates. 457 * 458 * The grand result is: 459 * 460 * (1) The volume header no longer needs to be synchronized for most 461 * flush and fsync operations. 462 * 463 * (2) Most fsync operations need only lay down REDO records 464 * 465 * (3) Data overwrite for nohistory operations covered by REDO records 466 * can be supported (instead of rolling a new block allocation), 467 * by rolling UNDO for the prior contents of the data. 468 * 469 * HAMMER VERSION 5 CHANGES 470 * 471 * Hammer version 5 contains a minor adjustment making layer2's bytes_free 472 * field signed, allowing dedup to push it into the negative domain. 473 */ 474 #define HAMMER_HEAD_ALIGN 8 475 #define HAMMER_HEAD_ALIGN_MASK (HAMMER_HEAD_ALIGN - 1) 476 #define HAMMER_HEAD_DOALIGN(bytes) \ 477 (((bytes) + HAMMER_HEAD_ALIGN_MASK) & ~HAMMER_HEAD_ALIGN_MASK) 478 479 #define HAMMER_UNDO_ALIGN 512 480 #define HAMMER_UNDO_ALIGN64 ((uint64_t)512) 481 #define HAMMER_UNDO_MASK (HAMMER_UNDO_ALIGN - 1) 482 #define HAMMER_UNDO_MASK64 (HAMMER_UNDO_ALIGN64 - 1) 483 484 struct hammer_fifo_head { 485 uint16_t hdr_signature; 486 uint16_t hdr_type; 487 uint32_t hdr_size; /* Aligned size of the whole mess */ 488 uint32_t hdr_seq; /* Sequence number */ 489 hammer_crc_t hdr_crc; /* XOR crc up to field w/ crc after field */ 490 }; 491 492 #define HAMMER_FIFO_HEAD_CRCOFF offsetof(struct hammer_fifo_head, hdr_crc) 493 494 struct hammer_fifo_tail { 495 uint16_t tail_signature; 496 uint16_t tail_type; 497 uint32_t tail_size; /* aligned size of the whole mess */ 498 }; 499 500 typedef struct hammer_fifo_head *hammer_fifo_head_t; 501 typedef struct hammer_fifo_tail *hammer_fifo_tail_t; 502 503 /* 504 * Fifo header types. 505 * 506 * NOTE: 0x8000U part of HAMMER_HEAD_TYPE_PAD can be removed if the HAMMER 507 * version ever gets bumped again. It exists only to keep compatibility with 508 * older versions. 509 */ 510 #define HAMMER_HEAD_TYPE_PAD (0x0040U | 0x8000U) 511 #define HAMMER_HEAD_TYPE_DUMMY 0x0041U /* dummy entry w/seqno */ 512 #define HAMMER_HEAD_TYPE_UNDO 0x0043U /* random UNDO information */ 513 #define HAMMER_HEAD_TYPE_REDO 0x0044U /* data REDO / fast fsync */ 514 515 #define HAMMER_HEAD_SIGNATURE 0xC84EU 516 #define HAMMER_TAIL_SIGNATURE 0xC74FU 517 518 /* 519 * Misc FIFO structures. 520 * 521 * UNDO - Raw meta-data media updates. 522 */ 523 struct hammer_fifo_undo { 524 struct hammer_fifo_head head; 525 hammer_off_t undo_offset; /* zone-1,2 offset */ 526 int32_t undo_data_bytes; 527 int32_t undo_reserved01; 528 /* followed by data */ 529 }; 530 531 /* 532 * REDO (HAMMER version 4+) - Logical file writes/truncates. 533 * 534 * REDOs contain information which will be duplicated in a later meta-data 535 * update, allowing fast write()+fsync() operations. REDOs can be ignored 536 * without harming filesystem integrity but must be processed if fsync() 537 * semantics are desired. 538 * 539 * Unlike UNDOs which are processed backwards within the recovery span, 540 * REDOs must be processed forwards starting further back (starting outside 541 * the recovery span). 542 * 543 * WRITE - Write logical file (with payload). Executed both 544 * out-of-span and in-span. Out-of-span WRITEs may be 545 * filtered out by TERMs. 546 * 547 * TRUNC - Truncate logical file (no payload). Executed both 548 * out-of-span and in-span. Out-of-span WRITEs may be 549 * filtered out by TERMs. 550 * 551 * TERM_* - Indicates meta-data was committed (if out-of-span) or 552 * will be rolled-back (in-span). Any out-of-span TERMs 553 * matching earlier WRITEs remove those WRITEs from 554 * consideration as they might conflict with a later data 555 * commit (which is not being rolled-back). 556 * 557 * SYNC - The earliest in-span SYNC (the last one when scanning 558 * backwards) tells the recovery code how far out-of-span 559 * it must go to run REDOs. 560 * 561 * NOTE: WRITEs do not always have matching TERMs even under 562 * perfect conditions because truncations might remove the 563 * buffers from consideration. I/O problems can also remove 564 * buffers from consideration. 565 * 566 * TRUNCSs do not always have matching TERMs because several 567 * truncations may be aggregated together into a single TERM. 568 */ 569 struct hammer_fifo_redo { 570 struct hammer_fifo_head head; 571 int64_t redo_objid; /* file being written */ 572 hammer_off_t redo_offset; /* logical offset in file */ 573 int32_t redo_data_bytes; 574 uint32_t redo_flags; 575 uint32_t redo_localization; 576 uint32_t redo_reserved; 577 uint64_t redo_mtime; /* set mtime */ 578 }; 579 580 #define HAMMER_REDO_WRITE 0x00000001 581 #define HAMMER_REDO_TRUNC 0x00000002 582 #define HAMMER_REDO_TERM_WRITE 0x00000004 583 #define HAMMER_REDO_TERM_TRUNC 0x00000008 584 #define HAMMER_REDO_SYNC 0x00000010 585 586 union hammer_fifo_any { 587 struct hammer_fifo_head head; 588 struct hammer_fifo_undo undo; 589 struct hammer_fifo_redo redo; 590 }; 591 592 typedef struct hammer_fifo_redo *hammer_fifo_redo_t; 593 typedef struct hammer_fifo_undo *hammer_fifo_undo_t; 594 typedef union hammer_fifo_any *hammer_fifo_any_t; 595 596 /* 597 * Volume header types 598 */ 599 #define HAMMER_FSBUF_VOLUME 0xC8414D4DC5523031ULL /* HAMMER01 */ 600 #define HAMMER_FSBUF_VOLUME_REV 0x313052C54D4D41C8ULL /* (reverse endian) */ 601 602 /* 603 * HAMMER Volume header 604 * 605 * A HAMMER filesystem can be built from 1-256 block devices, each block 606 * device contains a volume header followed by however many buffers fit 607 * into the volume. 608 * 609 * One of the volumes making up a HAMMER filesystem is the root volume. 610 * The root volume is always volume #0 which is the first block device path 611 * specified by newfs_hammer(8). All HAMMER volumes have a volume header, 612 * however the root volume may be the only volume that has valid values for 613 * some fields in the header. 614 * 615 * Special field notes: 616 * 617 * vol_bot_beg - offset of boot area (mem_beg - bot_beg bytes) 618 * vol_mem_beg - offset of memory log (buf_beg - mem_beg bytes) 619 * vol_buf_beg - offset of the first buffer in volume 620 * vol_buf_end - offset of volume EOF (on buffer boundary) 621 * 622 * The memory log area allows a kernel to cache new records and data 623 * in memory without allocating space in the actual filesystem to hold 624 * the records and data. In the event that a filesystem becomes full, 625 * any records remaining in memory can be flushed to the memory log 626 * area. This allows the kernel to immediately return success. 627 * 628 * The buffer offset is a physical offset of zone-2 offset. The lower 629 * 52 bits of the zone-2 offset is added to the buffer offset of each 630 * volume to generate an actual I/O offset within the block device. 631 * 632 * NOTE: boot area and memory log are currently not used. 633 */ 634 635 /* 636 * These macros are only used by userspace when userspace commands either 637 * initialize or add a new HAMMER volume. 638 */ 639 #define HAMMER_BOOT_MINBYTES (32*1024) 640 #define HAMMER_BOOT_NOMBYTES (64LL*1024*1024) 641 #define HAMMER_BOOT_MAXBYTES (256LL*1024*1024) 642 643 #define HAMMER_MEM_MINBYTES (256*1024) 644 #define HAMMER_MEM_NOMBYTES (1LL*1024*1024*1024) 645 #define HAMMER_MEM_MAXBYTES (64LL*1024*1024*1024) 646 647 struct hammer_volume_ondisk { 648 uint64_t vol_signature; /* HAMMER_FSBUF_VOLUME for a valid header */ 649 650 int64_t vol_bot_beg; /* offset of boot area */ 651 int64_t vol_mem_beg; /* offset of memory log */ 652 int64_t vol_buf_beg; /* offset of the first buffer in volume */ 653 int64_t vol_buf_end; /* offset of volume EOF (on buffer boundary) */ 654 int64_t vol_locked; /* not used */ 655 656 uuid_t vol_fsid; /* identify filesystem */ 657 uuid_t vol_fstype; /* identify filesystem type */ 658 char vol_name[64]; /* filesystem label, not a block device path */ 659 660 int32_t vol_no; /* volume number within filesystem */ 661 int32_t vol_count; /* number of volumes making up FS */ 662 663 uint32_t vol_version; /* version control information */ 664 hammer_crc_t vol_crc; /* header crc */ 665 uint32_t vol_flags; /* volume flags */ 666 uint32_t vol_rootvol; /* which volume is the root volume? */ 667 668 int32_t vol_reserved04; 669 int32_t vol_reserved05; 670 uint32_t vol_reserved06; 671 uint32_t vol_reserved07; 672 673 int64_t vol_reserved08; 674 int64_t vol_reserved09; 675 676 /* 677 * These fields are initialized and space is reserved in every 678 * volume making up a HAMMER filesytem, but only the root volume 679 * contains valid data. Note that vol0_stat_bigblocks does not 680 * include big-blocks for freemap and undomap initially allocated 681 * by newfs_hammer(8). 682 */ 683 int64_t vol0_stat_bigblocks; /* total big-blocks when fs is empty */ 684 int64_t vol0_stat_freebigblocks;/* number of free big-blocks */ 685 int64_t vol0_stat_bytes; /* for statfs only */ 686 int64_t vol0_stat_inodes; /* for statfs only */ 687 int64_t vol0_reserved10; 688 hammer_off_t vol0_btree_root; /* B-Tree root */ 689 hammer_tid_t vol0_next_tid; /* highest partially synchronized TID */ 690 hammer_off_t vol0_unused03; 691 692 /* 693 * Blockmaps for zones. Not all zones use a blockmap. Note that 694 * the entire root blockmap is cached in the hammer_mount structure. 695 */ 696 struct hammer_blockmap vol0_blockmap[HAMMER_MAX_ZONES]; 697 698 /* 699 * Array of zone-2 addresses for undo FIFO. 700 */ 701 hammer_off_t vol0_undo_array[HAMMER_UNDO_LAYER2]; 702 }; 703 704 typedef struct hammer_volume_ondisk *hammer_volume_ondisk_t; 705 706 #define HAMMER_ROOT_VOLNO 0 707 708 #define HAMMER_VOLF_NEEDFLUSH 0x0004 /* volume needs flush */ 709 710 #define HAMMER_VOL_CRCSIZE1 \ 711 offsetof(struct hammer_volume_ondisk, vol_crc) 712 #define HAMMER_VOL_CRCSIZE2 \ 713 (sizeof(struct hammer_volume_ondisk) - HAMMER_VOL_CRCSIZE1 - \ 714 sizeof(hammer_crc_t)) 715 716 #define HAMMER_VOL_VERSION_MIN 1 /* minimum supported version */ 717 #define HAMMER_VOL_VERSION_DEFAULT 6 /* newfs default version */ 718 #define HAMMER_VOL_VERSION_WIP 7 /* version >= this is WIP */ 719 #define HAMMER_VOL_VERSION_MAX 6 /* maximum supported version */ 720 721 #define HAMMER_VOL_VERSION_ONE 1 722 #define HAMMER_VOL_VERSION_TWO 2 /* new dirent layout (2.3+) */ 723 #define HAMMER_VOL_VERSION_THREE 3 /* new snapshot layout (2.5+) */ 724 #define HAMMER_VOL_VERSION_FOUR 4 /* new undo/flush (2.5+) */ 725 #define HAMMER_VOL_VERSION_FIVE 5 /* dedup (2.9+) */ 726 #define HAMMER_VOL_VERSION_SIX 6 /* DIRHASH_ALG1 */ 727 728 /* 729 * Translate a zone-2 address to physical address 730 */ 731 #define hammer_xlate_to_phys(volume, zone2_offset) \ 732 ((volume)->vol_buf_beg + \ 733 ((zone2_offset) & HAMMER_OFF_SHORT_MASK)) 734 735 /* 736 * Record types are fairly straightforward. The B-Tree includes the record 737 * type in its index sort. 738 */ 739 #define HAMMER_RECTYPE_UNKNOWN 0x0000 740 #define HAMMER_RECTYPE_LOWEST 0x0001 /* lowest record type avail */ 741 #define HAMMER_RECTYPE_INODE 0x0001 /* inode in obj_id space */ 742 #define HAMMER_RECTYPE_DATA 0x0010 743 #define HAMMER_RECTYPE_DIRENTRY 0x0011 744 #define HAMMER_RECTYPE_DB 0x0012 745 #define HAMMER_RECTYPE_EXT 0x0013 /* ext attributes */ 746 #define HAMMER_RECTYPE_FIX 0x0014 /* fixed attribute */ 747 #define HAMMER_RECTYPE_PFS 0x0015 /* PFS management */ 748 #define HAMMER_RECTYPE_SNAPSHOT 0x0016 /* Snapshot management */ 749 #define HAMMER_RECTYPE_CONFIG 0x0017 /* hammer cleanup config */ 750 #define HAMMER_RECTYPE_MAX 0xFFFF 751 752 #define HAMMER_RECTYPE_ENTRY_START (HAMMER_RECTYPE_INODE + 1) 753 #define HAMMER_RECTYPE_CLEAN_START HAMMER_RECTYPE_EXT 754 755 #define HAMMER_FIXKEY_SYMLINK 1 756 757 #define HAMMER_OBJTYPE_UNKNOWN 0 /* never exists on-disk as unknown */ 758 #define HAMMER_OBJTYPE_DIRECTORY 1 759 #define HAMMER_OBJTYPE_REGFILE 2 760 #define HAMMER_OBJTYPE_DBFILE 3 761 #define HAMMER_OBJTYPE_FIFO 4 762 #define HAMMER_OBJTYPE_CDEV 5 763 #define HAMMER_OBJTYPE_BDEV 6 764 #define HAMMER_OBJTYPE_SOFTLINK 7 765 #define HAMMER_OBJTYPE_PSEUDOFS 8 /* pseudo filesystem obj */ 766 #define HAMMER_OBJTYPE_SOCKET 9 767 768 /* 769 * HAMMER inode attribute data 770 * 771 * The data reference for a HAMMER inode points to this structure. Any 772 * modifications to the contents of this structure will result in a 773 * replacement operation. 774 * 775 * parent_obj_id is only valid for directories (which cannot be hard-linked), 776 * and specifies the parent directory obj_id. This field will also be set 777 * for non-directory inodes as a recovery aid, but can wind up holding 778 * stale information. However, since object id's are not reused, the worse 779 * that happens is that the recovery code is unable to use it. 780 * A parent_obj_id of 0 means it's a root inode of root or non-root PFS. 781 * 782 * NOTE: Future note on directory hardlinks. We can implement a record type 783 * which allows us to point to multiple parent directories. 784 */ 785 struct hammer_inode_data { 786 uint16_t version; /* inode data version */ 787 uint16_t mode; /* basic unix permissions */ 788 uint32_t uflags; /* chflags */ 789 uint32_t rmajor; /* used by device nodes */ 790 uint32_t rminor; /* used by device nodes */ 791 uint64_t ctime; 792 int64_t parent_obj_id; /* parent directory obj_id */ 793 uuid_t uid; 794 uuid_t gid; 795 796 uint8_t obj_type; 797 uint8_t cap_flags; /* capability support flags (extension) */ 798 uint16_t reserved01; 799 uint32_t reserved02; /* RESERVED FOR POSSIBLE FUTURE BIRTHTIME */ 800 uint64_t nlinks; /* hard links */ 801 uint64_t size; /* filesystem object size */ 802 union { 803 char symlink[24]; /* HAMMER_INODE_BASESYMLEN */ 804 } ext; 805 uint64_t mtime; /* mtime must be second-to-last */ 806 uint64_t atime; /* atime must be last */ 807 }; 808 809 /* 810 * Neither mtime nor atime upates are CRCd by the B-Tree element. 811 * mtime updates have UNDO, atime updates do not. 812 */ 813 #define HAMMER_INODE_CRCSIZE \ 814 offsetof(struct hammer_inode_data, mtime) 815 816 #define HAMMER_INODE_DATA_VERSION 1 817 #define HAMMER_OBJID_ROOT 1 /* root inodes # */ 818 #define HAMMER_INODE_BASESYMLEN 24 /* see ext.symlink */ 819 820 /* 821 * Capability & implementation flags. 822 * 823 * HAMMER_INODE_CAP_DIR_LOCAL_INO - Use inode B-Tree localization 824 * for directory entries. Also see HAMMER_DIR_INODE_LOCALIZATION(). 825 */ 826 #define HAMMER_INODE_CAP_DIRHASH_MASK 0x03 /* directory: hash algorithm */ 827 #define HAMMER_INODE_CAP_DIRHASH_ALG0 0x00 828 #define HAMMER_INODE_CAP_DIRHASH_ALG1 0x01 829 #define HAMMER_INODE_CAP_DIRHASH_ALG2 0x02 830 #define HAMMER_INODE_CAP_DIRHASH_ALG3 0x03 831 #define HAMMER_INODE_CAP_DIR_LOCAL_INO 0x04 /* use inode localization */ 832 833 /* 834 * A HAMMER directory entry associates a HAMMER filesystem object with a 835 * namespace. It is possible to hook into a pseudo-filesystem (with its 836 * own inode numbering space) in the filesystem by setting the high 837 * 16 bits of the localization field. The low 16 bits must be 0 and 838 * are reserved for future use. 839 * 840 * Directory entries are indexed with a 128 bit namekey rather then an 841 * offset. A portion of the namekey is an iterator/randomizer to deal 842 * with collisions. 843 * 844 * NOTE: leaf.base.obj_type from the related B-Tree leaf entry holds 845 * the filesystem object type of obj_id, e.g. a den_type equivalent. 846 * It is not stored in hammer_direntry_data. 847 * 848 * NOTE: name field / the filename data reference is NOT terminated with \0. 849 */ 850 struct hammer_direntry_data { 851 int64_t obj_id; /* object being referenced */ 852 uint32_t localization; /* identify pseudo-filesystem */ 853 uint32_t reserved02; 854 char name[16]; /* name (extended) */ 855 }; 856 857 #define HAMMER_ENTRY_NAME_OFF offsetof(struct hammer_direntry_data, name[0]) 858 #define HAMMER_ENTRY_SIZE(nlen) offsetof(struct hammer_direntry_data, name[nlen]) 859 860 /* 861 * Symlink data which does not fit in the inode is stored in a separate 862 * FIX type record. 863 */ 864 struct hammer_symlink_data { 865 char name[16]; /* name (extended) */ 866 }; 867 868 #define HAMMER_SYMLINK_NAME_OFF offsetof(struct hammer_symlink_data, name[0]) 869 870 /* 871 * The root inode for the primary filesystem and root inode for any 872 * pseudo-fs may be tagged with an optional data structure using 873 * HAMMER_RECTYPE_PFS and localization id. This structure allows 874 * the node to be used as a mirroring master or slave. 875 * 876 * When operating as a slave CD's into the node automatically become read-only 877 * and as-of sync_end_tid. 878 * 879 * When operating as a master the read PFSD info sets sync_end_tid to 880 * the most recently flushed TID. 881 * 882 * sync_low_tid is not yet used but will represent the highest pruning 883 * end-point, after which full history is available. 884 * 885 * We need to pack this structure making it equally sized on both 32-bit and 886 * 64-bit machines as it is part of struct hammer_ioc_mrecord_pfs which is 887 * send over the wire in hammer mirror operations. Only on 64-bit machines 888 * the size of this struct differ when packed or not. This leads us to the 889 * situation where old 64-bit systems (using the non-packed structure), 890 * which were never able to mirror to/from 32-bit systems, are now no longer 891 * able to mirror to/from newer 64-bit systems (using the packed structure). 892 */ 893 struct hammer_pseudofs_data { 894 hammer_tid_t sync_low_tid; /* full history beyond this point */ 895 hammer_tid_t sync_beg_tid; /* earliest tid w/ full history avail */ 896 hammer_tid_t sync_end_tid; /* current synchronizatoin point */ 897 uint64_t sync_beg_ts; /* real-time of last completed sync */ 898 uint64_t sync_end_ts; /* initiation of current sync cycle */ 899 uuid_t shared_uuid; /* shared uuid (match required) */ 900 uuid_t unique_uuid; /* unique uuid of this master/slave */ 901 int32_t reserved01; /* reserved for future master_id */ 902 int32_t mirror_flags; /* misc flags */ 903 char label[64]; /* filesystem space label */ 904 char snapshots[64]; /* softlink dir for pruning */ 905 int32_t reserved02; /* was prune_{time,freq} */ 906 int32_t reserved03; /* was reblock_{time,freq} */ 907 int32_t reserved04; /* was snapshot_freq */ 908 int32_t prune_min; /* do not prune recent history */ 909 int32_t prune_max; /* do not retain history beyond here */ 910 int32_t reserved[16]; 911 } __packed; 912 913 typedef struct hammer_pseudofs_data *hammer_pseudofs_data_t; 914 915 #define HAMMER_PFSD_SLAVE 0x00000001 916 #define HAMMER_PFSD_DELETED 0x80000000 917 918 #define hammer_is_pfs_slave(pfsd) \ 919 (((pfsd)->mirror_flags & HAMMER_PFSD_SLAVE) != 0) 920 #define hammer_is_pfs_master(pfsd) \ 921 (!hammer_is_pfs_slave(pfsd)) 922 #define hammer_is_pfs_deleted(pfsd) \ 923 (((pfsd)->mirror_flags & HAMMER_PFSD_DELETED) != 0) 924 925 #define HAMMER_MAX_PFS 65536 926 #define HAMMER_MAX_PFSID (HAMMER_MAX_PFS - 1) 927 #define HAMMER_ROOT_PFSID 0 928 929 /* 930 * Snapshot meta-data { Objid = HAMMER_OBJID_ROOT, Key = tid, rectype = SNAPSHOT }. 931 * 932 * Snapshot records replace the old <fs>/snapshots/<softlink> methodology. Snapshot 933 * records are mirrored but may be independantly managed once they are laid down on 934 * a slave. 935 * 936 * NOTE: The b-tree key is signed, the tid is not, so callers must still sort the 937 * results. 938 * 939 * NOTE: Reserved fields must be zero (as usual) 940 */ 941 struct hammer_snapshot_data { 942 hammer_tid_t tid; /* the snapshot TID itself (== key) */ 943 uint64_t ts; /* real-time when snapshot was made */ 944 uint64_t reserved01; 945 uint64_t reserved02; 946 char label[64]; /* user-supplied description */ 947 uint64_t reserved03[4]; 948 }; 949 950 /* 951 * Config meta-data { ObjId = HAMMER_OBJID_ROOT, Key = 0, rectype = CONFIG }. 952 * 953 * Used to store the hammer cleanup config. This data is not mirrored. 954 */ 955 struct hammer_config_data { 956 char text[1024]; 957 }; 958 959 /* 960 * Rollup various structures embedded as record data 961 */ 962 union hammer_data_ondisk { 963 struct hammer_direntry_data entry; 964 struct hammer_inode_data inode; 965 struct hammer_symlink_data symlink; 966 struct hammer_pseudofs_data pfsd; 967 struct hammer_snapshot_data snap; 968 struct hammer_config_data config; 969 }; 970 971 typedef union hammer_data_ondisk *hammer_data_ondisk_t; 972 973 /* 974 * Ondisk layout of B-Tree related structures 975 */ 976 #include "hammer_btree.h" 977 978 #define HAMMER_DIR_INODE_LOCALIZATION(ino_data) \ 979 (((ino_data)->cap_flags & HAMMER_INODE_CAP_DIR_LOCAL_INO) ? \ 980 HAMMER_LOCALIZE_INODE : \ 981 HAMMER_LOCALIZE_MISC) 982 983 #endif /* !VFS_HAMMER_DISK_H_ */ 984